diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index b95ff998ba73..8080038ff1b2 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -34,7 +34,11 @@ Optional properties:
   platforms.
 - tx-fifo-depth: See ethernet.txt file in the same directory
 - rx-fifo-depth: See ethernet.txt file in the same directory
-- snps,pbl		Programmable Burst Length
+- snps,pbl		Programmable Burst Length (tx and rx)
+- snps,txpbl		Tx Programmable Burst Length. Only for GMAC and newer.
+			If set, DMA tx will use this value rather than snps,pbl.
+- snps,rxpbl		Rx Programmable Burst Length. Only for GMAC and newer.
+			If set, DMA rx will use this value rather than snps,pbl.
 - snps,aal		Address-Aligned Beats
 - snps,fixed-burst	Program the DMA to use the fixed burst mode
 - snps,mixed-burst	Program the DMA to use the mixed burst mode
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 014f4f756cb7..6add57374f70 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -153,7 +153,8 @@ Where:
    o pbl: the Programmable Burst Length is maximum number of beats to
        be transferred in one DMA transaction.
        GMAC also enables the 4xPBL by default.
-   o fixed_burst/mixed_burst/burst_len
+   o txpbl/rxpbl: GMAC and newer supports independent DMA pbl for tx/rx.
+   o fixed_burst/mixed_burst/aal
  o clk_csr: fixed CSR Clock range selection.
  o has_gmac: uses the GMAC core.
  o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@@ -205,16 +206,22 @@ tuned according to the HW capabilities.
 
 struct stmmac_dma_cfg {
 	int pbl;
+	int txpbl;
+	int rxpbl;
 	int fixed_burst;
-	int burst_len_supported;
+	int mixed_burst;
+	bool aal;
 };
 
 Where:
- o pbl: Programmable Burst Length
+ o pbl: Programmable Burst Length (tx and rx)
+ o txpbl: Transmit Programmable Burst Length. Only for GMAC and newer.
+	 If set, DMA tx will use this value rather than pbl.
+ o rxpbl: Receive Programmable Burst Length. Only for GMAC and newer.
+	 If set, DMA rx will use this value rather than pbl.
  o fixed_burst: program the DMA to use the fixed burst mode
- o burst_len: this is the value we put in the register
-	      supported values are provided as macros in
-	      linux/stmmac.h header file.
+ o mixed_burst: program the DMA to use the mixed burst mode
+ o aal: Address-Aligned Beats
 
 ---
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 318ae9f10104..99b8040af592 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -89,20 +89,20 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
 			       u32 dma_tx, u32 dma_rx, int atds)
 {
 	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
 
 	/*
 	 * Set the DMA PBL (Programmable Burst Length) mode.
 	 *
 	 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
 	 * post 3.5 mode bit acts as 8*PBL.
-	 *
-	 * This configuration doesn't take care about the Separate PBL
-	 * so only the bits: 13-8 are programmed with the PBL passed from the
-	 * platform.
 	 */
 	value |= DMA_BUS_MODE_MAXPBL;
-	value &= ~DMA_BUS_MODE_PBL_MASK;
-	value |= (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= DMA_BUS_MODE_USP;
+	value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+	value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
 
 	/* Set the Fixed burst mode */
 	if (dma_cfg->fixed_burst)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 7d82a3464097..2c3b2098f350 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -71,11 +71,14 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 	writel(value, ioaddr + DMA_SYS_BUS_MODE);
 }
 
-static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl,
+static void dwmac4_dma_init_channel(void __iomem *ioaddr,
+				    struct stmmac_dma_cfg *dma_cfg,
 				    u32 dma_tx_phy, u32 dma_rx_phy,
 				    u32 channel)
 {
 	u32 value;
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
 
 	/* set PBL for each channels. Currently we affect same configuration
 	 * on each channel
@@ -85,11 +88,11 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl,
 	writel(value, ioaddr + DMA_CHAN_CONTROL(channel));
 
 	value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
-	value = value | (pbl << DMA_BUS_MODE_PBL_SHIFT);
+	value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
 	writel(value, ioaddr + DMA_CHAN_TX_CONTROL(channel));
 
 	value = readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
-	value = value | (pbl << DMA_BUS_MODE_RPBL_SHIFT);
+	value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
 	writel(value, ioaddr + DMA_CHAN_RX_CONTROL(channel));
 
 	/* Mask interrupts by writing to CSR7 */
@@ -120,8 +123,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
 	writel(value, ioaddr + DMA_SYS_BUS_MODE);
 
 	for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
-		dwmac4_dma_init_channel(ioaddr, dma_cfg->pbl,
-					dma_tx, dma_rx, i);
+		dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i);
 }
 
 static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 81800f23a9c4..96afe0561c99 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -315,6 +315,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
 	if (!dma_cfg->pbl)
 		dma_cfg->pbl = DEFAULT_DMA_PBL;
+	of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
+	of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
 
 	dma_cfg->aal = of_property_read_bool(np, "snps,aal");
 	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 3537fb33cc90..e6d7a5940819 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -88,6 +88,8 @@ struct stmmac_mdio_bus_data {
 
 struct stmmac_dma_cfg {
 	int pbl;
+	int txpbl;
+	int rxpbl;
 	int fixed_burst;
 	int mixed_burst;
 	bool aal;