Merge remote branch 'linus/master' into drm-intel-fixes

Merge with Linus to resolve conflicting fixes for the reusing the stale
HEAD value during intel_ring_wait().

Conflicts:
	drivers/gpu/drm/i915/intel_ringbuffer.c

Documentation/DocBook/device-drivers.tmpl

@@ -217,8 +217,8 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
-!Edrivers/serial/8250.c
+!Edrivers/tty/serial/serial_core.c
+!Edrivers/tty/serial/8250.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/DocBook/dvb/dvbapi.xml

@@ -28,7 +28,7 @@
 	<holder>Convergence GmbH</holder>
 </copyright>
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 

Documentation/DocBook/media.tmpl

@@ -28,7 +28,7 @@
 <title>LINUX MEDIA INFRASTRUCTURE API</title>
 
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>LinuxTV Developers</holder>
 </copyright>
 
@@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </author>
 </authorgroup>
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 

Documentation/DocBook/v4l/dev-rds.xml

@@ -75,6 +75,7 @@ as follows:</para>
   </section>
 
   <section>
+    <title>RDS datastructures</title>
     <table frame="none" pgwide="1" id="v4l2-rds-data">
       <title>struct
 <structname>v4l2_rds_data</structname></title>
@@ -129,10 +130,11 @@ as follows:</para>
 
     <table frame="none" pgwide="1" id="v4l2-rds-block-codes">
       <title>Block defines</title>
-      <tgroup cols="3">
+      <tgroup cols="4">
 	<colspec colname="c1" colwidth="1*" />
 	<colspec colname="c2" colwidth="1*" />
-	<colspec colname="c3" colwidth="5*" />
+	<colspec colname="c3" colwidth="1*" />
+	<colspec colname="c4" colwidth="5*" />
 	<tbody valign="top">
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_MSK</entry>

Documentation/DocBook/v4l/v4l2.xml

@@ -100,6 +100,7 @@ Remote Controller chapter.</contrib>
       <year>2008</year>
       <year>2009</year>
       <year>2010</year>
+      <year>2011</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
@@ -381,7 +382,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 2.6.33</subtitle>
+ <subtitle>Revision 2.6.38</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/feature-removal-schedule.txt

@@ -357,14 +357,6 @@ Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
 
 -----------------------------
 
-What:	__do_IRQ all in one fits nothing interrupt handler
-When:	2.6.32
-Why:	__do_IRQ was kept for easy migration to the type flow handlers.
-	More than two years of migration time is enough.
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
------------------------------
-
 What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
 When:	2011
 Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to

Documentation/hwmon/lm93

@@ -6,6 +6,10 @@ Supported chips:
     Prefix 'lm93'
     Addresses scanned: I2C 0x2c-0x2e
     Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf
+  * National Semiconductor LM94
+    Prefix 'lm94'
+    Addresses scanned: I2C 0x2c-0x2e
+    Datasheet: http://www.national.com/ds.cgi/LM/LM94.pdf
 
 Authors:
 	Mark M. Hoffman <mhoffman@lightlink.com>
@@ -56,6 +60,9 @@ previous motherboard management ASICs and uses some of the LM85's features
 for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual
 processor Xeon class motherboard with a minimum of external components.
 
+LM94 is also supported in LM93 compatible mode. Extra sensors and features of
+LM94 are not supported.
+
 
 User Interface
 --------------

Documentation/lguest/lguest.c

@@ -39,6 +39,9 @@
 #include <limits.h>
 #include <stddef.h>
 #include <signal.h>
+#include <pwd.h>
+#include <grp.h>
+
 #include <linux/virtio_config.h>
 #include <linux/virtio_net.h>
 #include <linux/virtio_blk.h>
@@ -298,20 +301,27 @@ static void *map_zeroed_pages(unsigned int num)
 
 	/*
 	 * We use a private mapping (ie. if we write to the page, it will be
-	 * copied).
+	 * copied). We allocate an extra two pages PROT_NONE to act as guard
+	 * pages against read/write attempts that exceed allocated space.
 	 */
-	addr = mmap(NULL, getpagesize() * num,
-		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
+	addr = mmap(NULL, getpagesize() * (num+2),
+		    PROT_NONE, MAP_PRIVATE, fd, 0);
+
 	if (addr == MAP_FAILED)
 		err(1, "Mmapping %u pages of /dev/zero", num);
 
+	if (mprotect(addr + getpagesize(), getpagesize() * num,
+		     PROT_READ|PROT_WRITE) == -1)
+		err(1, "mprotect rw %u pages failed", num);
+
 	/*
 	 * One neat mmap feature is that you can close the fd, and it
 	 * stays mapped.
 	 */
 	close(fd);
 
-	return addr;
+	/* Return address after PROT_NONE page */
+	return addr + getpagesize();
 }
 
 /* Get some more pages for a device. */
@@ -343,7 +353,7 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 	 * done to it.  This allows us to share untouched memory between
 	 * Guests.
 	 */
-	if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
+	if (mmap(addr, len, PROT_READ|PROT_WRITE,
 		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
 		return;
 
@@ -573,10 +583,10 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
 			    unsigned int line)
 {
 	/*
-	 * We have to separately check addr and addr+size, because size could
-	 * be huge and addr + size might wrap around.
+	 * Check if the requested address and size exceeds the allocated memory,
+	 * or addr + size wraps around.
 	 */
-	if (addr >= guest_limit || addr + size >= guest_limit)
+	if ((addr + size) > guest_limit || (addr + size) < addr)
 		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
 	/*
 	 * We return a pointer for the caller's convenience, now we know it's
@@ -1872,6 +1882,8 @@ static struct option opts[] = {
 	{ "block", 1, NULL, 'b' },
 	{ "rng", 0, NULL, 'r' },
 	{ "initrd", 1, NULL, 'i' },
+	{ "username", 1, NULL, 'u' },
+	{ "chroot", 1, NULL, 'c' },
 	{ NULL },
 };
 static void usage(void)
@@ -1894,6 +1906,12 @@ int main(int argc, char *argv[])
 	/* If they specify an initrd file to load. */
 	const char *initrd_name = NULL;
 
+	/* Password structure for initgroups/setres[gu]id */
+	struct passwd *user_details = NULL;
+
+	/* Directory to chroot to */
+	char *chroot_path = NULL;
+
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
 
@@ -1950,6 +1968,14 @@ int main(int argc, char *argv[])
 		case 'i':
 			initrd_name = optarg;
 			break;
+		case 'u':
+			user_details = getpwnam(optarg);
+			if (!user_details)
+				err(1, "getpwnam failed, incorrect username?");
+			break;
+		case 'c':
+			chroot_path = optarg;
+			break;
 		default:
 			warnx("Unknown argument %s", argv[optind]);
 			usage();
@@ -2021,6 +2047,37 @@ int main(int argc, char *argv[])
 	/* If we exit via err(), this kills all the threads, restores tty. */
 	atexit(cleanup_devices);
 
+	/* If requested, chroot to a directory */
+	if (chroot_path) {
+		if (chroot(chroot_path) != 0)
+			err(1, "chroot(\"%s\") failed", chroot_path);
+
+		if (chdir("/") != 0)
+			err(1, "chdir(\"/\") failed");
+
+		verbose("chroot done\n");
+	}
+
+	/* If requested, drop privileges */
+	if (user_details) {
+		uid_t u;
+		gid_t g;
+
+		u = user_details->pw_uid;
+		g = user_details->pw_gid;
+
+		if (initgroups(user_details->pw_name, g) != 0)
+			err(1, "initgroups failed");
+
+		if (setresgid(g, g, g) != 0)
+			err(1, "setresgid failed");
+
+		if (setresuid(u, u, u) != 0)
+			err(1, "setresuid failed");
+
+		verbose("Dropping privileges completed\n");
+	}
+
 	/* Finally, run the Guest.  This doesn't return. */
 	run_guest();
 }

Documentation/lguest/lguest.txt

@@ -117,6 +117,11 @@ Running Lguest:
     
   for general information on how to get bridging to work.
 
+- Random number generation. Using the --rng option will provide a
+  /dev/hwrng in the guest that will read from the host's /dev/random.
+  Use this option in conjunction with rng-tools (see ../hw_random.txt)
+  to provide entropy to the guest kernel's /dev/random.
+
 There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
 
 Good luck!

Documentation/sound/alsa/soc/codec.txt

@@ -27,42 +27,38 @@ ASoC Codec driver breakdown
 
 1 - Codec DAI and PCM configuration
 -----------------------------------
-Each codec driver must have a struct snd_soc_codec_dai to define its DAI and
+Each codec driver must have a struct snd_soc_dai_driver to define its DAI and
 PCM capabilities and operations. This struct is exported so that it can be
 registered with the core by your machine driver.
 
 e.g.
 
-struct snd_soc_codec_dai wm8731_dai = {
-	.name = "WM8731",
-	/* playback capabilities */
+static struct snd_soc_dai_ops wm8731_dai_ops = {
+	.prepare	= wm8731_pcm_prepare,
+	.hw_params	= wm8731_hw_params,
+	.shutdown	= wm8731_shutdown,
+	.digital_mute	= wm8731_mute,
+	.set_sysclk	= wm8731_set_dai_sysclk,
+	.set_fmt	= wm8731_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver wm8731_dai = {
+	.name = "wm8731-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* capture capabilities */
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* pcm operations - see section 4 below */
-	.ops = {
-		.prepare = wm8731_pcm_prepare,
-		.hw_params = wm8731_hw_params,
-		.shutdown = wm8731_shutdown,
-	},
-	/* DAI operations - see DAI.txt */
-	.dai_ops = {
-		.digital_mute = wm8731_mute,
-		.set_sysclk = wm8731_set_dai_sysclk,
-		.set_fmt = wm8731_set_dai_fmt,
-	}
+	.ops = &wm8731_dai_ops,
+	.symmetric_rates = 1,
 };
-EXPORT_SYMBOL_GPL(wm8731_dai);
 
 
 2 - Codec control IO
@@ -186,13 +182,14 @@ when the mute is applied or freed.
 
 i.e.
 
-static int wm8974_mute(struct snd_soc_codec *codec,
-	struct snd_soc_codec_dai *dai, int mute)
+static int wm8974_mute(struct snd_soc_dai *dai, int mute)
 {
-	u16 mute_reg = wm8974_read_reg_cache(codec, WM8974_DAC) & 0xffbf;
-	if(mute)
-		wm8974_write(codec, WM8974_DAC, mute_reg | 0x40);
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf;
+
+	if (mute)
+		snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40);
 	else
-		wm8974_write(codec, WM8974_DAC, mute_reg);
+		snd_soc_write(codec, WM8974_DAC, mute_reg);
 	return 0;
 }

Documentation/sound/alsa/soc/machine.txt

@@ -12,6 +12,8 @@ the following struct:-
 struct snd_soc_card {
 	char *name;
 
+	...
+
 	int (*probe)(struct platform_device *pdev);
 	int (*remove)(struct platform_device *pdev);
 
@@ -22,12 +24,13 @@ struct snd_soc_card {
 	int (*resume_pre)(struct platform_device *pdev);
 	int (*resume_post)(struct platform_device *pdev);
 
-	/* machine stream operations */
-	struct snd_soc_ops *ops;
+	...
 
 	/* CPU <--> Codec DAI links  */
 	struct snd_soc_dai_link *dai_link;
 	int num_links;
+
+	...
 };
 
 probe()/remove()
@@ -42,11 +45,6 @@ of any machine audio tasks that have to be done before or after the codec, DAIs
 and DMA is suspended and resumed. Optional.
 
 
-Machine operations
-------------------
-The machine specific audio operations can be set here. Again this is optional.
-
-
 Machine DAI Configuration
 -------------------------
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
@@ -61,8 +59,10 @@ struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 static struct snd_soc_dai_link corgi_dai = {
 	.name = "WM8731",
 	.stream_name = "WM8731",
-	.cpu_dai = &pxa_i2s_dai,
-	.codec_dai = &wm8731_dai,
+	.cpu_dai_name = "pxa-is2-dai",
+	.codec_dai_name = "wm8731-hifi",
+	.platform_name = "pxa-pcm-audio",
+	.codec_name = "wm8713-codec.0-001a",
 	.init = corgi_wm8731_init,
 	.ops = &corgi_ops,
 };
@@ -77,26 +77,6 @@ static struct snd_soc_card snd_soc_corgi = {
 };
 
 
-Machine Audio Subsystem
------------------------
-
-The machine soc device glues the platform, machine and codec driver together.
-Private data can also be set here. e.g.
-
-/* corgi audio private data */
-static struct wm8731_setup_data corgi_wm8731_setup = {
-	.i2c_address = 0x1b,
-};
-
-/* corgi audio subsystem */
-static struct snd_soc_device corgi_snd_devdata = {
-	.machine = &snd_soc_corgi,
-	.platform = &pxa2xx_soc_platform,
-	.codec_dev = &soc_codec_dev_wm8731,
-	.codec_data = &corgi_wm8731_setup,
-};
-
-
 Machine Power Map
 -----------------
 

Documentation/sound/alsa/soc/platform.txt

@@ -20,9 +20,10 @@ struct snd_soc_ops {
 	int (*trigger)(struct snd_pcm_substream *, int);
 };
 
-The platform driver exports its DMA functionality via struct snd_soc_platform:-
+The platform driver exports its DMA functionality via struct
+snd_soc_platform_driver:-
 
-struct snd_soc_platform {
+struct snd_soc_platform_driver {
 	char *name;
 
 	int (*probe)(struct platform_device *pdev);
@@ -34,6 +35,13 @@ struct snd_soc_platform {
 	int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *, struct snd_pcm *);
 	void (*pcm_free)(struct snd_pcm *);
 
+	/*
+	 * For platform caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+
 	/* platform stream ops */
 	struct snd_pcm_ops *pcm_ops;
 };

Documentation/video4linux/v4l2-controls.txt

@@ -285,6 +285,9 @@ implement g_volatile_ctrl like this:
 The 'new value' union is not used in g_volatile_ctrl. In general controls
 that need to implement g_volatile_ctrl are read-only controls.
 
+Note that if one or more controls in a control cluster are marked as volatile,
+then all the controls in the cluster are seen as volatile.
+
 To mark a control as volatile you have to set the is_volatile flag:
 
 	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
@@ -462,6 +465,15 @@ pointer to the v4l2_ctrl_ops struct that is used for that cluster.
 Obviously, all controls in the cluster array must be initialized to either
 a valid control or to NULL.
 
+In rare cases you might want to know which controls of a cluster actually
+were set explicitly by the user. For this you can check the 'is_new' flag of
+each control. For example, in the case of a volume/mute cluster the 'is_new'
+flag of the mute control would be set if the user called VIDIOC_S_CTRL for
+mute only. If the user would call VIDIOC_S_EXT_CTRLS for both mute and volume
+controls, then the 'is_new' flag would be 1 for both controls.
+
+The 'is_new' flag is always 1 when called from v4l2_ctrl_handler_setup().
+
 
 VIDIOC_LOG_STATUS Support
 =========================

MAINTAINERS

@@ -162,7 +162,7 @@ L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F:	drivers/serial/8250*
+F:	drivers/tty/serial/8250*
 F:	include/linux/serial_8250.h
 
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
@@ -624,11 +624,15 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
-ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
+ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
 M:	Andrew Victor <linux@maxim.org.za>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://maxim.org.za/at91_26.html
-S:	Maintained
+W:	http://www.linux4sam.org
+S:	Supported
+F:	arch/arm/mach-at91/
 
 ARM/BCMRING ARM ARCHITECTURE
 M:	Jiandong Zheng <jdzheng@broadcom.com>
@@ -888,8 +892,8 @@ F:	arch/arm/mach-msm/
 F:	drivers/video/msm/
 F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
-F:	drivers/serial/msm_serial.h
-F:	drivers/serial/msm_serial.c
+F:	drivers/tty/serial/msm_serial.h
+F:	drivers/tty/serial/msm_serial.c
 T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
 S:	Maintained
 
@@ -1256,7 +1260,7 @@ F:	drivers/mmc/host/atmel-mci-regs.h
 ATMEL AT91 / AT32 SERIAL DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
-F:	drivers/serial/atmel_serial.c
+F:	drivers/tty/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
@@ -1412,7 +1416,7 @@ M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
-F:	drivers/serial/bfin_5xx.c
+F:	drivers/tty/serial/bfin_5xx.c
 
 BLACKFIN WATCHDOG DRIVER
 M:	Mike Frysinger <vapier.adi@gmail.com>
@@ -1877,7 +1881,7 @@ L:	linux-cris-kernel@axis.com
 W:	http://developer.axis.com
 S:	Maintained
 F:	arch/cris/
-F:	drivers/serial/crisv10.*
+F:	drivers/tty/serial/crisv10.*
 
 CRYPTO API
 M:	Herbert Xu <herbert@gondor.apana.org.au>
@@ -2216,7 +2220,7 @@ F:	drivers/net/wan/dscc4.c
 DZ DECSTATION DZ11 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
-F:	drivers/serial/dz.*
+F:	drivers/tty/serial/dz.*
 
 EATA-DMA SCSI DRIVER
 M:	Michael Neuffer <mike@i-Connect.Net>
@@ -2643,7 +2647,7 @@ FREESCALE QUICC ENGINE UCC UART DRIVER
 M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
-F:	drivers/serial/ucc_uart.c
+F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
 M:	Timur Tabi <timur@freescale.com>
@@ -3146,7 +3150,7 @@ S:	Orphan
 F:	drivers/video/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-M:	Roland Dreier <rolandd@cisco.com>
+M:	Roland Dreier <roland@kernel.org>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
@@ -3350,7 +3354,7 @@ IOC3 SERIAL DRIVER
 M:	Pat Gefre <pfg@sgi.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
-F:	drivers/serial/ioc3_serial.c
+F:	drivers/tty/serial/ioc3_serial.c
 
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
@@ -3527,7 +3531,7 @@ JSM Neo PCI based serial card
 M:	Breno Leitao <leitao@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
-F:	drivers/serial/jsm/
+F:	drivers/tty/serial/jsm/
 
 K10TEMP HARDWARE MONITORING DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -3670,6 +3674,28 @@ F:	include/linux/key-type.h
 F:	include/keys/
 F:	security/keys/
 
+KEYS-TRUSTED
+M:	David Safford <safford@watson.ibm.com>
+M:	Mimi Zohar <zohar@us.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/trusted-type.h
+F:	security/keys/trusted.c
+F:	security/keys/trusted.h
+
+KEYS-ENCRYPTED
+M:	Mimi Zohar <zohar@us.ibm.com>
+M:	David Safford <safford@watson.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/encrypted-type.h
+F:	security/keys/encrypted.c
+F:	security/keys/encrypted.h
+
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 W:	http://kgdb.wiki.kernel.org/
@@ -3677,7 +3703,7 @@ L:	kgdb-bugreport@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/DocBook/kgdb.tmpl
 F:	drivers/misc/kgdbts.c
-F:	drivers/serial/kgdboc.c
+F:	drivers/tty/serial/kgdboc.c
 F:	include/linux/kdb.h
 F:	include/linux/kgdb.h
 F:	kernel/debug/
@@ -5545,7 +5571,7 @@ M:	Pat Gefre <pfg@sgi.com>
 L:	linux-ia64@vger.kernel.org
 S:	Supported
 F:	Documentation/ia64/serial.txt
-F:	drivers/serial/ioc?_serial.c
+F:	drivers/tty/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
 SGI VISUAL WORKSTATION 320 AND 540
@@ -5567,7 +5593,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
 F:	arch/arm/mach-lh7a40x/
-F:	drivers/serial/serial_lh7a40x.c
+F:	drivers/tty/serial/serial_lh7a40x.c
 F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
@@ -5787,14 +5813,14 @@ L:	sparclinux@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
-F:	drivers/serial/suncore.c
-F:	drivers/serial/suncore.h
-F:	drivers/serial/sunhv.c
-F:	drivers/serial/sunsab.c
-F:	drivers/serial/sunsab.h
-F:	drivers/serial/sunsu.c
-F:	drivers/serial/sunzilog.c
-F:	drivers/serial/sunzilog.h
+F:	drivers/tty/serial/suncore.c
+F:	drivers/tty/serial/suncore.h
+F:	drivers/tty/serial/sunhv.c
+F:	drivers/tty/serial/sunsab.c
+F:	drivers/tty/serial/sunsab.h
+F:	drivers/tty/serial/sunsu.c
+F:	drivers/tty/serial/sunzilog.c
+F:	drivers/tty/serial/sunzilog.h
 
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
@@ -6124,8 +6150,8 @@ TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F:	drivers/char/tty_*
-F:	drivers/serial/serial_core.c
+F:	drivers/tty/*
+F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
 F:	include/linux/tty.h
@@ -6870,7 +6896,7 @@ XILINX UARTLITE SERIAL DRIVER
 M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
-F:	drivers/serial/uartlite.c
+F:	drivers/tty/serial/uartlite.c
 
 YAM DRIVER FOR AX.25
 M:	Jean-Paul Roubelat <jpr@f6fbb.org>
@@ -6916,7 +6942,7 @@ F:	drivers/media/video/zoran/
 ZS DECSTATION Z85C30 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
-F:	drivers/serial/zs.*
+F:	drivers/tty/serial/zs.*
 
 GRE DEMULTIPLEXER DRIVER
 M:	Dmitry Kozlov <xeb@mail.ru>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 37
-EXTRAVERSION =
+SUBLEVEL = 38
+EXTRAVERSION = -rc2
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -8,6 +8,9 @@ config ALPHA
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_PROBE
+	select AUTO_IRQ_AFFINITY if SMP
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -68,22 +71,6 @@ config GENERIC_IOMAP
 	bool
 	default n
 
-config GENERIC_HARDIRQS_NO__DO_IRQ
-	def_bool y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config AUTO_IRQ_AFFINITY
-	bool
-	depends on SMP
-	default y
-
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 

arch/arm/configs/ag5evm_defconfig

@@ -10,7 +10,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set

arch/arm/configs/am200epdkit_defconfig

@@ -3,7 +3,7 @@ CONFIG_LOCALVERSION="gum"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SHMEM is not set

arch/arm/configs/at572d940hfek_defconfig

@@ -17,7 +17,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m

arch/arm/configs/badge4_defconfig

@@ -1,6 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 CONFIG_ARCH_SA1100=y

arch/arm/configs/bcmring_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_ELF_CORE is not set

arch/arm/configs/cm_x2xx_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set

arch/arm/configs/colibri_pxa270_defconfig

@@ -8,7 +8,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/collie_defconfig

@@ -4,7 +4,7 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_EPOLL is not set
 CONFIG_SLOB=y

arch/arm/configs/corgi_defconfig

@@ -4,7 +4,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_MODULES=y

arch/arm/configs/da8xx_omapl_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y

arch/arm/configs/davinci_all_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y

arch/arm/configs/dove_defconfig

@@ -1,7 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/ebsa110_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_ARCH_EBSA110=y
 CONFIG_PCCARD=m

arch/arm/configs/edb7211_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_EDB7211=y

arch/arm/configs/em_x270_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set

arch/arm/configs/ep93xx_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/eseries_pxa_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y

arch/arm/configs/ezx_defconfig

@@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/footbridge_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
 CONFIG_ARCH_FOOTBRIDGE=y

arch/arm/configs/fortunet_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_FORTUNET=y

arch/arm/configs/h5000_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/imote2_defconfig

@@ -6,7 +6,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/ixp2000_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/ixp23xx_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/ixp4xx_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set

arch/arm/configs/loki_defconfig

@@ -1,7 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/lpd7a400_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
 # CONFIG_IOSCHED_DEADLINE is not set

arch/arm/configs/lpd7a404_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
 CONFIG_SLAB=y

arch/arm/configs/magician_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/mv78xx0_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y

arch/arm/configs/mx1_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/mx21_defconfig

@@ -4,7 +4,7 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/mx27_defconfig

@@ -4,7 +4,7 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y

arch/arm/configs/mx3_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/mx51_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_RELAY=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y

arch/arm/configs/nhk8815_defconfig

@@ -7,7 +7,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/omap1_defconfig

@@ -6,7 +6,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set

arch/arm/configs/omap2plus_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y

arch/arm/configs/orion5x_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y

arch/arm/configs/pcm027_defconfig

@@ -7,7 +7,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/pcontrol_g20_defconfig

@@ -10,7 +10,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set

arch/arm/configs/pleb_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_SHMEM is not set
 CONFIG_MODULES=y

arch/arm/configs/pnx4008_defconfig

@@ -5,7 +5,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/simpad_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="oe1"
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y

arch/arm/configs/spitz_defconfig

@@ -4,7 +4,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_MODULES=y

arch/arm/configs/stmp378x_defconfig

@@ -5,7 +5,7 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/stmp37xx_defconfig

@@ -5,7 +5,7 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/tct_hammer_defconfig

@@ -5,7 +5,7 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set

arch/arm/configs/trizeps4_defconfig

@@ -7,7 +7,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/u300_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_MODULES=y

arch/arm/configs/viper_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=13
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_SHMEM is not set
 CONFIG_SLAB=y

arch/arm/configs/xcep_defconfig

@@ -8,7 +8,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set

arch/arm/mach-msm/board-qsd8x50.c

@@ -43,7 +43,7 @@ static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
  * at run-time: they vary from board to board, and the true
  * configuration won't be known until boot.
  */
-static struct resource smc91x_resources[] __initdata = {
+static struct resource smc91x_resources[] = {
 	[0] = {
 		.flags = IORESOURCE_MEM,
 	},
@@ -52,7 +52,7 @@ static struct resource smc91x_resources[] __initdata = {
 	},
 };
 
-static struct platform_device smc91x_device __initdata = {
+static struct platform_device smc91x_device = {
 	.name           = "smc91x",
 	.id             = 0,
 	.num_resources  = ARRAY_SIZE(smc91x_resources),

arch/arm/mach-s5p6442/mach-smdk6442.c

@@ -68,6 +68,7 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
 
 static struct platform_device *smdk6442_devices[] __initdata = {
 	&s3c_device_i2c0,
+	&samsung_asoc_dma,
 	&s5p6442_device_iis0,
 	&s3c_device_wdt,
 };

arch/arm/mach-s5p64x0/mach-smdk6440.c

@@ -95,6 +95,7 @@ static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s3c_device_ts,
 	&s3c_device_wdt,
+	&samsung_asoc_dma,
 	&s5p6440_device_iis,
 };
 

arch/arm/mach-s5p64x0/mach-smdk6450.c

@@ -113,6 +113,7 @@ static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s3c_device_ts,
 	&s3c_device_wdt,
+	&samsung_asoc_dma,
 	&s5p6450_device_iis0,
 	/* s5p6450_device_spi0 will be added */
 };

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -81,6 +81,7 @@ static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
 };
 
 static struct platform_device *smdkc110_devices[] __initdata = {
+	&samsung_asoc_dma,
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
 	&s5pv210_device_spdif,

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -225,6 +225,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s5pv210_device_ac97,
 	&s5pv210_device_iis0,
 	&s5pv210_device_spdif,
+	&samsung_asoc_dma,
 	&samsung_device_keypad,
 	&smdkv210_dm9000,
 	&smdkv210_lcd_lte480wv,

arch/arm/mach-s5pv310/mach-smdkc210.c

@@ -163,8 +163,9 @@ static struct platform_device *smdkc210_devices[] __initdata = {
 	&s5pv310_device_pd[PD_CAM],
 	&s5pv310_device_pd[PD_TV],
 	&s5pv310_device_pd[PD_GPS],
-	&smdkc210_smsc911x,
 	&s5pv310_device_sysmmu,
+	&samsung_asoc_dma,
+	&smdkc210_smsc911x,
 };
 
 static void __init smdkc210_smsc911x_init(void)

arch/arm/mach-s5pv310/mach-smdkv310.c

@@ -163,8 +163,9 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5pv310_device_pd[PD_CAM],
 	&s5pv310_device_pd[PD_TV],
 	&s5pv310_device_pd[PD_GPS],
-	&smdkv310_smsc911x,
 	&s5pv310_device_sysmmu,
+	&samsung_asoc_dma,
+	&smdkv310_smsc911x,
 };
 
 static void __init smdkv310_smsc911x_init(void)

arch/avr32/Kconfig

@@ -1,8 +1,8 @@
 config AVR32
 	def_bool y
-	# With EMBEDDED=n, we get lots of stuff automatically selected
+	# With EXPERT=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
-	select EMBEDDED
+	select EXPERT
 	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES

arch/blackfin/Kconfig

@@ -30,6 +30,9 @@ config BLACKFIN
 	select HAVE_KERNEL_LZO if RAMKERNEL
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_PROBE
+	select IRQ_PER_CPU if SMP
 
 config GENERIC_CSUM
 	def_bool y
@@ -44,15 +47,6 @@ config ZONE_DMA
 config GENERIC_FIND_NEXT_BIT
 	def_bool y
 
-config GENERIC_HARDIRQS
-	def_bool y
-
-config GENERIC_IRQ_PROBE
-	def_bool y
-
-config GENERIC_HARDIRQS_NO__DO_IRQ
-	def_bool y
-
 config GENERIC_GPIO
 	def_bool y
 
@@ -254,11 +248,6 @@ config HOTPLUG_CPU
 	depends on SMP && HOTPLUG
 	default y
 
-config IRQ_PER_CPU
-	bool
-	depends on SMP
-	default y
-
 config HAVE_LEGACY_PER_CPU_AREA
 	def_bool y
 	depends on SMP

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF527-AD7160-EVAL_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_AIO is not set
 CONFIG_SLAB=y

arch/blackfin/configs/BF527-EZKIT-V2_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF527-TLL6527M_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF561-ACVILON_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF561-EZKIT-SMP_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BlackStamp_defconfig

@@ -6,7 +6,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/CM-BF527_defconfig

@@ -8,7 +8,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/CM-BF533_defconfig

@@ -7,7 +7,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set

arch/blackfin/configs/CM-BF537E_defconfig

@@ -8,7 +8,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set

arch/blackfin/configs/CM-BF537U_defconfig

@@ -8,7 +8,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set

arch/blackfin/configs/CM-BF548_defconfig

@@ -8,7 +8,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set

arch/blackfin/configs/CM-BF561_defconfig

@@ -8,7 +8,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set

arch/blackfin/configs/DNP5370_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLOB=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set