Merge 4.18-rc7 into usb-next

We want the USB fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2018-07-30 10:04:58 +02:00
commit 8a7b5d0f75
532 changed files with 5151 additions and 2721 deletions

View File

@ -15,6 +15,8 @@ Constructor parameters:
size)
5. the number of optional parameters (the parameters with an argument
count as two)
start_sector n (default: 0)
offset from the start of cache device in 512-byte sectors
high_watermark n (default: 50)
start writeback when the number of used blocks reach this
watermark

View File

@ -66,7 +66,7 @@ Required root node properties:
- "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale
Octa board.
- "insignal,origen" - for Exynos4210-based Insignal Origen board.
- "insignal,origen4412 - for Exynos4412-based Insignal Origen board.
- "insignal,origen4412" - for Exynos4412-based Insignal Origen board.
Optional nodes:

View File

@ -36,7 +36,7 @@ Optional nodes:
- port/ports: to describe a connection to an external encoder. The
binding follows Documentation/devicetree/bindings/graph.txt and
suppors a single port with a single endpoint.
supports a single port with a single endpoint.
- See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting

View File

@ -1,7 +1,7 @@
Nintendo Wii (Hollywood) GPIO controller
Required properties:
- compatible: "nintendo,hollywood-gpio
- compatible: "nintendo,hollywood-gpio"
- reg: Physical base address and length of the controller's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be <2>. The first cell is the pin number and the

View File

@ -32,7 +32,7 @@ i2c@00000000 {
reg = <0x6c>;
interrupt-parent = <&gpx1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&ldo15_reg>";
vdd-supply = <&ldo15_reg>;
vid-supply = <&ldo18_reg>;
reset-gpios = <&gpx1 5 0>;
touchscreen-size-x = <1080>;

View File

@ -15,7 +15,7 @@ Required properties:
include "nvidia,tegra30-ictlr".
- reg : Specifies base physical address and size of the registers.
Each controller must be described separately (Tegra20 has 4 of them,
whereas Tegra30 and later have 5"
whereas Tegra30 and later have 5).
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.

View File

@ -12,7 +12,7 @@ Required properties:
specifier, shall be 2
- interrupts: interrupts references to primary interrupt controller
(only needed for exti controller with multiple exti under
same parent interrupt: st,stm32-exti and st,stm32h7-exti")
same parent interrupt: st,stm32-exti and st,stm32h7-exti)
Example:

View File

@ -152,7 +152,7 @@ Required properties:
- compatible : should contain one of:
"brcm,bcm7425-timers"
"brcm,bcm7429-timers"
"brcm,bcm7435-timers and
"brcm,bcm7435-timers" and
"brcm,brcmstb-timers"
- reg : the timers register range
- interrupts : the interrupt line for this timer block

View File

@ -238,7 +238,7 @@ PROPERTIES
Must include one of the following:
- "fsl,fman-dtsec" for dTSEC MAC
- "fsl,fman-xgec" for XGEC MAC
- "fsl,fman-memac for mEMAC MAC
- "fsl,fman-memac" for mEMAC MAC
- cell-index
Usage: required

View File

@ -133,7 +133,7 @@ located inside a PM domain with index 0 of a power controller represented by a
node with the label "power".
In the second example the consumer device are partitioned across two PM domains,
the first with index 0 and the second with index 1, of a power controller that
is represented by a node with the label "power.
is represented by a node with the label "power".
Optional properties:
- required-opps: This contains phandle to an OPP node in another device's OPP

View File

@ -16,7 +16,7 @@ Required properties:
Optional properties:
- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
If DCDCs are externally controlled then this property should be there.
- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
If DCDCs are externally controlled and if it is from GPIO then GPIO
number should be provided. If it is externally controlled and no GPIO
entry then driver will just configure this rails as external control

View File

@ -15,7 +15,7 @@ Please refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be st,stih407-softreset";
- compatible: Should be "st,stih407-softreset";
- #reset-cells: 1, see below
example:

View File

@ -39,7 +39,7 @@ Required properties:
Optional property:
- clock-frequency: Desired I2C bus clock frequency in Hz.
When missing default to 400000Hz.
When missing default to 100000Hz.
Child nodes should conform to I2C bus binding as described in i2c.txt.

View File

@ -30,7 +30,7 @@ Required properties:
Board connectors:
* Headset Mic
* Secondary Mic",
* Secondary Mic
* DMIC
* Ext Spk

View File

@ -35,7 +35,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio.
"Digital Mic3"
Audio pins and MicBias on WCD9335 Codec:
"MIC_BIAS1
"MIC_BIAS1"
"MIC_BIAS2"
"MIC_BIAS3"
"MIC_BIAS4"

View File

@ -16,7 +16,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
Phy documentation is provided in the following places:
Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY
Example device nodes:

View File

@ -15,7 +15,7 @@ Optional properties:
Examples:
onewire@0 {
onewire {
compatible = "w1-gpio";
gpios = <&gpio 126 0>, <&gpio 105 0>;
};

View File

@ -1490,7 +1490,7 @@ To remove an ARP target:
To configure the interval between learning packet transmits:
# echo 12 > /sys/class/net/bond0/bonding/lp_interval
NOTE: the lp_inteval is the number of seconds between instances where
NOTE: the lp_interval is the number of seconds between instances where
the bonding driver sends learning packets to each slaves peer switch. The
default interval is 1 second.

View File

@ -47,41 +47,45 @@ Driver Configuration Parameters
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
Rx Descriptors:
Number of receive descriptors. A receive descriptor is a data
structure that describes a receive buffer and its attributes to the network
controller. The data in the descriptor is used by the controller to write
data from the controller to host memory. In the 3.x.x driver the valid range
for this parameter is 64-256. The default value is 256. This parameter can be
changed using the command::
ethtool -G eth? rx n
ethtool -G eth? rx n
Where n is the number of desired Rx descriptors.
Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
Tx Descriptors:
Number of transmit descriptors. A transmit descriptor is a data
structure that describes a transmit buffer and its attributes to the network
controller. The data in the descriptor is used by the controller to read
data from the host memory to the controller. In the 3.x.x driver the valid
range for this parameter is 64-256. The default value is 128. This parameter
can be changed using the command::
ethtool -G eth? tx n
ethtool -G eth? tx n
Where n is the number of desired Tx descriptors.
Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
Speed/Duplex:
The driver auto-negotiates the link speed and duplex settings by
default. The ethtool utility can be used as follows to force speed/duplex.::
ethtool -s eth? autoneg off speed {10|100} duplex {full|half}
ethtool -s eth? autoneg off speed {10|100} duplex {full|half}
NOTE: setting the speed/duplex to incorrect values will cause the link to
fail.
Event Log Message Level: The driver uses the message level flag to log events
Event Log Message Level:
The driver uses the message level flag to log events
to syslog. The message level can be set at driver load time. It can also be
set using the command::
ethtool -s eth? msglvl n
ethtool -s eth? msglvl n
Additional Configurations
@ -92,7 +96,7 @@ Configuring the Driver on Different Distributions
Configuring a network driver to load properly when the system is started
is distribution dependent. Typically, the configuration process involves
adding an alias line to /etc/modprobe.d/*.conf as well as editing other
adding an alias line to `/etc/modprobe.d/*.conf` as well as editing other
system startup scripts and/or configuration files. Many popular Linux
distributions ship with tools to make these changes for you. To learn
the proper way to configure a network device for your system, refer to
@ -160,7 +164,10 @@ This results in unbalanced receive traffic.
If you have multiple interfaces in a server, either turn on ARP
filtering by
(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
(1) entering::
echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
(this only works if your kernel's version is higher than 2.4.5), or
(2) installing the interfaces in separate broadcast domains (either

View File

@ -34,7 +34,8 @@ Command Line Parameters
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
NOTES: For more information about the AutoNeg, Duplex, and Speed
NOTES:
For more information about the AutoNeg, Duplex, and Speed
parameters, see the "Speed and Duplex Configuration" section in
this document.
@ -45,22 +46,27 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed
AutoNeg
-------
(Supported only on adapters with copper connections)
Valid Range: 0x01-0x0F, 0x20-0x2F
Default Value: 0x2F
:Valid Range: 0x01-0x0F, 0x20-0x2F
:Default Value: 0x2F
This parameter is a bit-mask that specifies the speed and duplex settings
advertised by the adapter. When this parameter is used, the Speed and
Duplex parameters must not be specified.
NOTE: Refer to the Speed and Duplex section of this readme for more
NOTE:
Refer to the Speed and Duplex section of this readme for more
information on the AutoNeg parameter.
Duplex
------
(Supported only on adapters with copper connections)
Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
Default Value: 0
:Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
:Default Value: 0
This defines the direction in which data is allowed to flow. Can be
either one or two-directional. If both Duplex and the link partner are
@ -70,18 +76,22 @@ duplex.
FlowControl
-----------
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
Default Value: Reads flow control settings from the EEPROM
:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
:Default Value: Reads flow control settings from the EEPROM
This parameter controls the automatic generation(Tx) and response(Rx)
to Ethernet PAUSE frames.
InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
Default Value: 3
:Valid Range:
0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
:Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
will generate for incoming packets. It does this by writing a value to the
@ -135,13 +145,15 @@ Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
NOTE:
InterruptThrottleRate takes precedence over the TxAbsIntDelay and
RxAbsIntDelay parameters. In other words, minimizing the receive
and/or transmit absolute delays does not force the controller to
generate more interrupts than what the Interrupt Throttle Rate
allows.
CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection
CAUTION:
If you are using the Intel(R) PRO/1000 CT Network Connection
(controller 82547), setting InterruptThrottleRate to a value
greater than 75,000, may hang (stop transmitting) adapters
under certain network conditions. If this occurs a NETDEV
@ -151,7 +163,8 @@ CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection
hang, ensure that InterruptThrottleRate is set no greater
than 75,000 and is not set to 0.
NOTE: When e1000 is loaded with default settings and multiple adapters
NOTE:
When e1000 is loaded with default settings and multiple adapters
are in use simultaneously, the CPU utilization may increase non-
linearly. In order to limit the CPU utilization without impacting
the overall throughput, we recommend that you load the driver as
@ -168,9 +181,11 @@ NOTE: When e1000 is loaded with default settings and multiple adapters
RxDescriptors
-------------
Valid Range: 48-256 for 82542 and 82543-based adapters
48-4096 for all other supported adapters
Default Value: 256
:Valid Range:
- 48-256 for 82542 and 82543-based adapters
- 48-4096 for all other supported adapters
:Default Value: 256
This value specifies the number of receive buffer descriptors allocated
by the driver. Increasing this value allows the driver to buffer more
@ -180,15 +195,17 @@ Each descriptor is 16 bytes. A receive buffer is also allocated for each
descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
on the MTU setting. The maximum MTU size is 16110.
NOTE: MTU designates the frame size. It only needs to be set for Jumbo
NOTE:
MTU designates the frame size. It only needs to be set for Jumbo
Frames. Depending on the available system resources, the request
for a higher number of receive descriptors may be denied. In this
case, use a lower number.
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 0
:Valid Range: 0-65535 (0=off)
:Default Value: 0
This value delays the generation of receive interrupts in units of 1.024
microseconds. Receive interrupt reduction can improve CPU efficiency if
@ -198,7 +215,8 @@ of TCP traffic. If the system is reporting dropped receives, this value
may be set too high, causing the driver to run out of available receive
descriptors.
CAUTION: When setting RxIntDelay to a value other than 0, adapters may
CAUTION:
When setting RxIntDelay to a value other than 0, adapters may
hang (stop transmitting) under certain network conditions. If
this occurs a NETDEV WATCHDOG message is logged in the system
event log. In addition, the controller is automatically reset,
@ -207,9 +225,11 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may
RxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
Valid Range: 0-65535 (0=off)
Default Value: 128
:Valid Range: 0-65535 (0=off)
:Default Value: 128
This value, in units of 1.024 microseconds, limits the delay in which a
receive interrupt is generated. Useful only if RxIntDelay is non-zero,
@ -220,9 +240,11 @@ conditions.
Speed
-----
(This parameter is supported only on adapters with copper connections.)
Valid Settings: 0, 10, 100, 1000
Default Value: 0 (auto-negotiate at all supported speeds)
:Valid Settings: 0, 10, 100, 1000
:Default Value: 0 (auto-negotiate at all supported speeds)
Speed forces the line speed to the specified value in megabits per second
(Mbps). If this parameter is not specified or is set to 0 and the link
@ -231,22 +253,26 @@ speed. Duplex should also be set when Speed is set to either 10 or 100.
TxDescriptors
-------------
Valid Range: 48-256 for 82542 and 82543-based adapters
48-4096 for all other supported adapters
Default Value: 256
:Valid Range:
- 48-256 for 82542 and 82543-based adapters
- 48-4096 for all other supported adapters
:Default Value: 256
This value is the number of transmit descriptors allocated by the driver.
Increasing this value allows the driver to queue more transmits. Each
descriptor is 16 bytes.
NOTE: Depending on the available system resources, the request for a
NOTE:
Depending on the available system resources, the request for a
higher number of transmit descriptors may be denied. In this case,
use a lower number.
TxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 8
:Valid Range: 0-65535 (0=off)
:Default Value: 8
This value delays the generation of transmit interrupts in units of
1.024 microseconds. Transmit interrupt reduction can improve CPU
@ -256,9 +282,11 @@ causing the driver to run out of available transmit descriptors.
TxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
Valid Range: 0-65535 (0=off)
Default Value: 32
:Valid Range: 0-65535 (0=off)
:Default Value: 32
This value, in units of 1.024 microseconds, limits the delay in which a
transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
@ -269,18 +297,21 @@ network conditions.
XsumRX
------
(This parameter is NOT supported on the 82542-based adapter.)
Valid Range: 0-1
Default Value: 1
:Valid Range: 0-1
:Default Value: 1
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
Copybreak
---------
Valid Range: 0-xxxxxxx (0=off)
Default Value: 256
Usage: modprobe e1000.ko copybreak=128
:Valid Range: 0-xxxxxxx (0=off)
:Default Value: 256
:Usage: modprobe e1000.ko copybreak=128
Driver copies all packets below or equaling this size to a fresh RX
buffer before handing it up the stack.
@ -292,8 +323,9 @@ it is also available during runtime at
SmartPowerDownEnable
--------------------
Valid Range: 0-1
Default Value: 0 (disabled)
:Valid Range: 0-1
:Default Value: 0 (disabled)
Allows PHY to turn off in lower power states. The user can turn off
this parameter in supported chipsets.
@ -309,14 +341,14 @@ fiber interface board only links at 1000 Mbps full-duplex.
For copper-based boards, the keywords interact as follows:
The default operation is auto-negotiate. The board advertises all
- The default operation is auto-negotiate. The board advertises all
supported speed and duplex combinations, and it links at the highest
common speed and duplex mode IF the link partner is set to auto-negotiate.
If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
- If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
is advertised (The 1000BaseT spec requires auto-negotiation.)
If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
- If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
negotiation is disabled, and the AutoNeg parameter is ignored. Partner
SHOULD also be forced.
@ -328,13 +360,15 @@ process.
The parameter may be specified as either a decimal or hexadecimal value as
determined by the bitmap below.
============== ====== ====== ======= ======= ====== ====== ======= ======
Bit position 7 6 5 4 3 2 1 0
Decimal Value 128 64 32 16 8 4 2 1
Hex value 80 40 20 10 8 4 2 1
Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
Duplex Full Full Half Full Half
============== ====== ====== ======= ======= ====== ====== ======= ======
Some examples of using AutoNeg:
Some examples of using AutoNeg::
modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half)
modprobe e1000 AutoNeg=1 (Same as above)
@ -357,56 +391,59 @@ Additional Configurations
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger
than the default of 1500. Use the ifconfig command to increase the MTU
size. For example::
Jumbo Frames support is enabled by changing the MTU to a value larger than
the default of 1500. Use the ifconfig command to increase the MTU size.
For example::
ifconfig eth<x> mtu 9000 up
This setting is not saved across reboots. It can be made permanent if
you add::
This setting is not saved across reboots. It can be made permanent if
you add::
MTU=9000
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
applies to the Red Hat distributions; other distributions may store this
setting in a different location.
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
applies to the Red Hat distributions; other distributions may store this
setting in a different location.
Notes: Degradation in throughput performance may be observed in some
Jumbo frames environments. If this is observed, increasing the
application's socket buffer size and/or increasing the
/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific
application manual and /usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
Notes:
Degradation in throughput performance may be observed in some Jumbo frames
environments. If this is observed, increasing the application's socket buffer
size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
See the specific application manual and /usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
- The maximum MTU setting for Jumbo Frames is 16110. This value
coincides with the maximum Jumbo Frames size of 16128.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
with the maximum Jumbo Frames size of 16128.
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
in poor performance or loss of link.
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
poor performance or loss of link.
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names:
Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
Connection
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names::
Intel(R) PRO/1000 Gigabit Server Adapter
Intel(R) PRO/1000 PM Network Connection
ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. The ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
https://www.kernel.org/pub/software/network/ethtool/
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. The ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
https://www.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
WoL is configured through the ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
Support
=======

View File

@ -2524,7 +2524,7 @@ S: Supported
F: drivers/scsi/esas2r
ATUSB IEEE 802.15.4 RADIO DRIVER
M: Stefan Schmidt <stefan@osg.samsung.com>
M: Stefan Schmidt <stefan@datenfreihafen.org>
L: linux-wpan@vger.kernel.org
S: Maintained
F: drivers/net/ieee802154/atusb.c
@ -5791,7 +5791,6 @@ F: include/linux/fsl/
FREESCALE SOC FS_ENET DRIVER
M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
M: Vitaly Bordug <vbordug@ru.mvista.com>
L: linuxppc-dev@lists.ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
@ -6910,7 +6909,7 @@ F: drivers/clk/clk-versaclock5.c
IEEE 802.15.4 SUBSYSTEM
M: Alexander Aring <alex.aring@gmail.com>
M: Stefan Schmidt <stefan@osg.samsung.com>
M: Stefan Schmidt <stefan@datenfreihafen.org>
L: linux-wpan@vger.kernel.org
W: http://wpan.cakelab.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git
@ -7097,6 +7096,7 @@ F: include/uapi/linux/input.h
F: include/uapi/linux/input-event-codes.h
F: include/linux/input/
F: Documentation/devicetree/bindings/input/
F: Documentation/devicetree/bindings/serio/
F: Documentation/input/
INPUT MULTITOUCH (MT) PROTOCOL
@ -8630,7 +8630,7 @@ MARVELL MWIFIEX WIRELESS DRIVER
M: Amitkumar Karwar <amitkarwar@gmail.com>
M: Nishant Sarmukadam <nishants@marvell.com>
M: Ganapathi Bhat <gbhat@marvell.com>
M: Xinming Hu <huxm@marvell.com>
M: Xinming Hu <huxinming820@gmail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/marvell/mwifiex/
@ -9076,7 +9076,7 @@ S: Maintained
F: drivers/usb/mtu3/
MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES
M: Peter Senna Tschudin <peter.senna@collabora.com>
M: Peter Senna Tschudin <peter.senna@gmail.com>
M: Martin Donnelly <martin.donnelly@ge.com>
M: Martyn Welch <martyn.welch@collabora.co.uk>
S: Maintained

View File

@ -2,7 +2,7 @@
VERSION = 4
PATCHLEVEL = 18
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc7
NAME = Merciless Moray
# *DOCUMENTATION*

View File

@ -1180,13 +1180,10 @@ SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
struct rusage32 __user *, ur)
{
unsigned int status = 0;
struct rusage r;
long err = kernel_wait4(pid, &status, options, &r);
long err = kernel_wait4(pid, ustatus, options, &r);
if (err <= 0)
return err;
if (put_user(status, ustatus))
return -EFAULT;
if (!ur)
return err;
if (put_tv_to_tv32(&ur->ru_utime, &r.ru_utime))

View File

@ -413,7 +413,7 @@ config ARC_HAS_DIV_REM
config ARC_HAS_ACCL_REGS
bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
default n
default y
help
Depending on the configuration, CPU can contain accumulator reg-pair
(also referred to as r58:r59). These can also be used by gcc as GPR so

View File

@ -16,7 +16,7 @@ endif
KBUILD_DEFCONFIG := nsim_700_defconfig
cflags-y += -fno-common -pipe -fno-builtin -D__linux__
cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7
cflags-$(CONFIG_ISA_ARCV2) += -mcpu=archs
@ -140,16 +140,3 @@ dtbs: scripts
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
# Hacks to enable final link due to absence of link-time branch relexation
# and gcc choosing optimal(shorter) branches at -O3
#
# vineetg Feb 2010: -mlong-calls switched off for overall kernel build
# However lib/decompress_inflate.o (.init.text) calls
# zlib_inflate_workspacesize (.text) causing relocation errors.
# Thus forcing all exten calls in this file to be long calls
export CFLAGS_decompress_inflate.o = -mmedium-calls
export CFLAGS_initramfs.o = -mmedium-calls
ifdef CONFIG_SMP
export CFLAGS_core.o = -mmedium-calls
endif

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EXPERT=y
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y

View File

@ -56,7 +56,6 @@ CONFIG_STMMAC_ETH=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y

View File

@ -234,6 +234,9 @@
POP gp
RESTORE_R12_TO_R0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
ld sp, [sp] /* restore original sp */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm
@ -315,6 +318,9 @@
POP gp
RESTORE_R12_TO_R0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
ld sp, [sp] /* restore original sp */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm

View File

@ -86,9 +86,6 @@
POP r1
POP r0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
.endm
/*--------------------------------------------------------------

View File

@ -34,9 +34,7 @@ struct machine_desc {
const char *name;
const char **dt_compat;
void (*init_early)(void);
#ifdef CONFIG_SMP
void (*init_per_cpu)(unsigned int);
#endif
void (*init_machine)(void);
void (*init_late)(void);

View File

@ -105,7 +105,7 @@ typedef pte_t * pgtable_t;
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/* Default Permissions for stack/heaps pages (Non Executable) */
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE)
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#define WANT_PAGE_VIRTUAL 1

View File

@ -377,7 +377,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
/* Decode a PTE containing swap "identifier "into constituents */
#define __swp_type(pte_lookalike) (((pte_lookalike).val) & 0x1f)
#define __swp_offset(pte_lookalike) ((pte_lookalike).val << 13)
#define __swp_offset(pte_lookalike) ((pte_lookalike).val >> 13)
/* NOPs, to keep generic kernel happy */
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })

View File

@ -31,10 +31,10 @@ void __init init_IRQ(void)
/* a SMP H/w block could do IPI IRQ request here */
if (plat_smp_ops.init_per_cpu)
plat_smp_ops.init_per_cpu(smp_processor_id());
#endif
if (machine_desc->init_per_cpu)
machine_desc->init_per_cpu(smp_processor_id());
#endif
}
/*

View File

@ -47,7 +47,8 @@ SYSCALL_DEFINE0(arc_gettls)
SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
{
struct pt_regs *regs = current_pt_regs();
int uval = -EFAULT;
u32 uval;
int ret;
/*
* This is only for old cores lacking LLOCK/SCOND, which by defintion
@ -60,23 +61,47 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
/* Z indicates to userspace if operation succeded */
regs->status32 &= ~STATUS_Z_MASK;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
ret = access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr));
if (!ret)
goto fail;
again:
preempt_disable();
if (__get_user(uval, uaddr))
goto done;
ret = __get_user(uval, uaddr);
if (ret)
goto fault;
if (uval == expected) {
if (!__put_user(new, uaddr))
regs->status32 |= STATUS_Z_MASK;
}
if (uval != expected)
goto out;
done:
ret = __put_user(new, uaddr);
if (ret)
goto fault;
regs->status32 |= STATUS_Z_MASK;
out:
preempt_enable();
return uval;
fault:
preempt_enable();
return uval;
if (unlikely(ret != -EFAULT))
goto fail;
down_read(&current->mm->mmap_sem);
ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr,
FAULT_FLAG_WRITE, NULL);
up_read(&current->mm->mmap_sem);
if (likely(!ret))
goto again;
fail:
force_sig(SIGSEGV, current);
return ret;
}
#ifdef CONFIG_ISA_ARCV2

View File

@ -7,5 +7,8 @@
menuconfig ARC_SOC_HSDK
bool "ARC HS Development Kit SOC"
depends on ISA_ARCV2
select ARC_HAS_ACCL_REGS
select CLK_HSDK
select RESET_HSDK
select MIGHT_HAVE_PCI

View File

@ -42,6 +42,66 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
#define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108)
#define SDIO_UHS_REG_EXT_DIV_2 (2 << 30)
#define HSDK_GPIO_INTC (ARC_PERIPHERAL_BASE + 0x3000)
static void __init hsdk_enable_gpio_intc_wire(void)
{
/*
* Peripherals on CPU Card are wired to cpu intc via intermediate
* DW APB GPIO blocks (mainly for debouncing)
*
* ---------------------
* | snps,archs-intc |
* ---------------------
* |
* ----------------------
* | snps,archs-idu-intc |
* ----------------------
* | | | | |
* | [eth] [USB] [... other peripherals]
* |
* -------------------
* | snps,dw-apb-intc |
* -------------------
* | | | |
* [Bt] [HAPS] [... other peripherals]
*
* Current implementation of "irq-dw-apb-ictl" driver doesn't work well
* with stacked INTCs. In particular problem happens if its master INTC
* not yet instantiated. See discussion here -
* https://lkml.org/lkml/2015/3/4/755
*
* So setup the first gpio block as a passive pass thru and hide it from
* DT hardware topology - connect intc directly to cpu intc
* The GPIO "wire" needs to be init nevertheless (here)
*
* One side adv is that peripheral interrupt handling avoids one nested
* intc ISR hop
*
* According to HSDK User's Manual [1], "Table 2 Interrupt Mapping"
* we have the following GPIO input lines used as sources of interrupt:
* - GPIO[0] - Bluetooth interrupt of RS9113 module
* - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector)
* - GPIO[3] - Audio codec (MAX9880A) interrupt
* - GPIO[8-23] - Available on Arduino and PMOD_x headers
* For now there's no use of Arduino and PMOD_x headers in Linux
* use-case so we only enable lines 0, 2 and 3.
*
* [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf
*/
#define GPIO_INTEN (HSDK_GPIO_INTC + 0x30)
#define GPIO_INTMASK (HSDK_GPIO_INTC + 0x34)
#define GPIO_INTTYPE_LEVEL (HSDK_GPIO_INTC + 0x38)
#define GPIO_INT_POLARITY (HSDK_GPIO_INTC + 0x3c)
#define GPIO_INT_CONNECTED_MASK 0x0d
iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK);
iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK);
iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL);
iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY);
iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN);
}
static void __init hsdk_init_early(void)
{
/*
@ -62,6 +122,8 @@ static void __init hsdk_init_early(void)
* minimum possible div-by-2.
*/
iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
hsdk_enable_gpio_intc_wire();
}
static const char *hsdk_compat[] __initconst = {

View File

@ -692,7 +692,7 @@
dsa,member = <0 0>;
eeprom-length = <512>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;

View File

@ -159,13 +159,7 @@
dais = <&mcbsp2_port>, <&mcbsp3_port>;
};
};
&dss {
status = "okay";
};
&gpio6 {
pwm8: dmtimer-pwm-8 {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_direction_pin>;
@ -192,7 +186,10 @@
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>;
};
};
&dss {
status = "okay";
};
&dsi1 {

View File

@ -338,6 +338,7 @@ static struct vm_area_struct gate_vma = {
static int __init gate_vma_init(void)
{
vma_init(&gate_vma, NULL);
gate_vma.vm_page_prot = PAGE_READONLY_EXEC;
return 0;
}

View File

@ -237,8 +237,8 @@ static void ecard_init_pgtables(struct mm_struct *mm)
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
vma_init(&vma, mm);
vma.vm_flags = VM_EXEC;
vma.vm_mm = mm;
flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);

View File

@ -37,7 +37,9 @@ static inline void __tlb_remove_table(void *_table)
static inline void tlb_flush(struct mmu_gather *tlb)
{
struct vm_area_struct vma = { .vm_mm = tlb->mm, };
struct vm_area_struct vma;
vma_init(&vma, tlb->mm);
/*
* The ASID allocator will either invalidate the ASID or mark

View File

@ -1351,9 +1351,9 @@ static void __update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
static void update_cpu_capabilities(u16 scope_mask)
{
__update_cpu_capabilities(arm64_features, scope_mask, "detected:");
__update_cpu_capabilities(arm64_errata, scope_mask,
"enabling workaround for");
__update_cpu_capabilities(arm64_features, scope_mask, "detected:");
}
static int __enable_cpu_capability(void *arg)
@ -1408,8 +1408,8 @@ __enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
static void __init enable_cpu_capabilities(u16 scope_mask)
{
__enable_cpu_capabilities(arm64_features, scope_mask);
__enable_cpu_capabilities(arm64_errata, scope_mask);
__enable_cpu_capabilities(arm64_features, scope_mask);
}
/*

View File

@ -108,11 +108,13 @@ static pte_t get_clear_flush(struct mm_struct *mm,
unsigned long pgsize,
unsigned long ncontig)
{
struct vm_area_struct vma = { .vm_mm = mm };
struct vm_area_struct vma;
pte_t orig_pte = huge_ptep_get(ptep);
bool valid = pte_valid(orig_pte);
unsigned long i, saddr = addr;
vma_init(&vma, mm);
for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) {
pte_t pte = ptep_get_and_clear(mm, addr, ptep);
@ -145,9 +147,10 @@ static void clear_flush(struct mm_struct *mm,
unsigned long pgsize,
unsigned long ncontig)
{
struct vm_area_struct vma = { .vm_mm = mm };
struct vm_area_struct vma;
unsigned long i, saddr = addr;
vma_init(&vma, mm);
for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
pte_clear(mm, addr, ptep);

View File

@ -611,11 +611,13 @@ void __init mem_init(void)
BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64);
#endif
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/*
* Make sure we chose the upper bound of sizeof(struct page)
* correctly.
* correctly when sizing the VMEMMAP array.
*/
BUILD_BUG_ON(sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT));
#endif
if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
extern int sysctl_overcommit_memory;

View File

@ -120,7 +120,7 @@ ia64_tlb_flush_mmu_tlbonly(struct mmu_gather *tlb, unsigned long start, unsigned
*/
struct vm_area_struct vma;
vma.vm_mm = tlb->mm;
vma_init(&vma, tlb->mm);
/* flush the address range from the tlb: */
flush_tlb_range(&vma, start, end);
/* now flush the virt. page-table area mapping the address range: */

View File

@ -2278,17 +2278,15 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
DPRINT(("smpl_buf @%p\n", smpl_buf));
/* allocate vma */
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma = vm_area_alloc(mm);
if (!vma) {
DPRINT(("Cannot allocate vma\n"));
goto error_kmem;
}
INIT_LIST_HEAD(&vma->anon_vma_chain);
/*
* partially initialize the vma for the sampling buffer
*/
vma->vm_mm = mm;
vma->vm_file = get_file(filp);
vma->vm_flags = VM_READ|VM_MAYREAD|VM_DONTEXPAND|VM_DONTDUMP;
vma->vm_page_prot = PAGE_READONLY; /* XXX may need to change */
@ -2346,7 +2344,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
return 0;
error:
kmem_cache_free(vm_area_cachep, vma);
vm_area_free(vma);
error_kmem:
pfm_rvfree(smpl_buf, size);

View File

@ -114,10 +114,8 @@ ia64_init_addr_space (void)
* the problem. When the process attempts to write to the register backing store
* for the first time, it will get a SEGFAULT in this case.
*/
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma = vm_area_alloc(current->mm);
if (vma) {
INIT_LIST_HEAD(&vma->anon_vma_chain);
vma->vm_mm = current->mm;
vma->vm_start = current->thread.rbs_bot & PAGE_MASK;
vma->vm_end = vma->vm_start + PAGE_SIZE;
vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT;
@ -125,7 +123,7 @@ ia64_init_addr_space (void)
down_write(&current->mm->mmap_sem);
if (insert_vm_struct(current->mm, vma)) {
up_write(&current->mm->mmap_sem);
kmem_cache_free(vm_area_cachep, vma);
vm_area_free(vma);
return;
}
up_write(&current->mm->mmap_sem);
@ -133,10 +131,8 @@ ia64_init_addr_space (void)
/* map NaT-page at address zero to speed up speculative dereferencing of NULL: */
if (!(current->personality & MMAP_PAGE_ZERO)) {
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma = vm_area_alloc(current->mm);
if (vma) {
INIT_LIST_HEAD(&vma->anon_vma_chain);
vma->vm_mm = current->mm;
vma->vm_end = PAGE_SIZE;
vma->vm_page_prot = __pgprot(pgprot_val(PAGE_READONLY) | _PAGE_MA_NAT);
vma->vm_flags = VM_READ | VM_MAYREAD | VM_IO |
@ -144,7 +140,7 @@ ia64_init_addr_space (void)
down_write(&current->mm->mmap_sem);
if (insert_vm_struct(current->mm, vma)) {
up_write(&current->mm->mmap_sem);
kmem_cache_free(vm_area_cachep, vma);
vm_area_free(vma);
return;
}
up_write(&current->mm->mmap_sem);
@ -277,7 +273,7 @@ static struct vm_area_struct gate_vma;
static int __init gate_vma_init(void)
{
gate_vma.vm_mm = NULL;
vma_init(&gate_vma, NULL);
gate_vma.vm_start = FIXADDR_USER_START;
gate_vma.vm_end = FIXADDR_USER_END;
gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC;

View File

@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
void ath79_ddr_wb_flush(u32 reg)
{
void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg;
void __iomem *flush_reg = ath79_ddr_wb_flush_base + (reg * 4);
/* Flush the DDR write buffer. */
__raw_writel(0x1, flush_reg);

View File

@ -212,12 +212,6 @@ static int __init bcm47xx_cpu_fixes(void)
*/
if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
cpu_wait = NULL;
/*
* BCM47XX Erratum "R10: PCIe Transactions Periodically Fail"
* Enable ExternalSync for sync instruction to take effect
*/
set_c0_config7(MIPS_CONF7_ES);
break;
#endif
}

View File

@ -681,8 +681,6 @@
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
/* ExternalSync */
#define MIPS_CONF7_ES (_ULCAST_(1) << 8)
#define MIPS_CONF7_IAR (_ULCAST_(1) << 10)
#define MIPS_CONF7_AR (_ULCAST_(1) << 16)
@ -2767,7 +2765,6 @@ __BUILD_SET_C0(status)
__BUILD_SET_C0(cause)
__BUILD_SET_C0(config)
__BUILD_SET_C0(config5)
__BUILD_SET_C0(config7)
__BUILD_SET_C0(intcontrol)
__BUILD_SET_C0(intctl)
__BUILD_SET_C0(srsmap)

View File

@ -54,5 +54,5 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
phys_addr_t size = resource_size(rsrc);
*start = fixup_bigphys_addr(rsrc->start, size);
*end = rsrc->start + size;
*end = rsrc->start + size - 1;
}

View File

@ -12,17 +12,17 @@ config NDS32
select CLONE_BACKWARDS
select COMMON_CLK
select DMA_NONCOHERENT_OPS
select GENERIC_ASHLDI3
select GENERIC_ASHRDI3
select GENERIC_LSHRDI3
select GENERIC_CMPDI2
select GENERIC_MULDI3
select GENERIC_UCMPDI2
select GENERIC_ATOMIC64
select GENERIC_CPU_DEVICES
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_CMPDI2
select GENERIC_LIB_LSHRDI3
select GENERIC_LIB_MULDI3
select GENERIC_LIB_UCMPDI2
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select GENERIC_TIME_VSYSCALL

View File

@ -34,10 +34,12 @@ ifdef CONFIG_CPU_LITTLE_ENDIAN
KBUILD_CFLAGS += $(call cc-option, -EL)
KBUILD_AFLAGS += $(call cc-option, -EL)
LDFLAGS += $(call cc-option, -EL)
CHECKFLAGS += -D__NDS32_EL__
else
KBUILD_CFLAGS += $(call cc-option, -EB)
KBUILD_AFLAGS += $(call cc-option, -EB)
LDFLAGS += $(call cc-option, -EB)
CHECKFLAGS += -D__NDS32_EB__
endif
boot := arch/nds32/boot

View File

@ -8,6 +8,8 @@
#define PG_dcache_dirty PG_arch_1
void flush_icache_range(unsigned long start, unsigned long end);
void flush_icache_page(struct vm_area_struct *vma, struct page *page);
#ifdef CONFIG_CPU_CACHE_ALIASING
void flush_cache_mm(struct mm_struct *mm);
void flush_cache_dup_mm(struct mm_struct *mm);
@ -34,13 +36,16 @@ void flush_anon_page(struct vm_area_struct *vma,
void flush_kernel_dcache_page(struct page *page);
void flush_kernel_vmap_range(void *addr, int size);
void invalidate_kernel_vmap_range(void *addr, int size);
void flush_icache_range(unsigned long start, unsigned long end);
void flush_icache_page(struct vm_area_struct *vma, struct page *page);
#define flush_dcache_mmap_lock(mapping) xa_lock_irq(&(mapping)->i_pages)
#define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&(mapping)->i_pages)
#else
#include <asm-generic/cacheflush.h>
#undef flush_icache_range
#undef flush_icache_page
#undef flush_icache_user_range
void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
unsigned long addr, int len);
#endif
#endif /* __NDS32_CACHEFLUSH_H__ */

View File

@ -16,7 +16,7 @@
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
"4: move %0, " err_reg "\n" \
" j 3b\n" \
" b 3b\n" \
" .popsection"
#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \

View File

@ -278,7 +278,8 @@ static void __init setup_memory(void)
void __init setup_arch(char **cmdline_p)
{
early_init_devtree( __dtb_start);
early_init_devtree(__atags_pointer ? \
phys_to_virt(__atags_pointer) : __dtb_start);
setup_cpuinfo();

View File

@ -13,7 +13,39 @@
extern struct cache_info L1_cache_info[2];
#ifndef CONFIG_CPU_CACHE_ALIASING
void flush_icache_range(unsigned long start, unsigned long end)
{
unsigned long line_size, flags;
line_size = L1_cache_info[DCACHE].line_size;
start = start & ~(line_size - 1);
end = (end + line_size - 1) & ~(line_size - 1);
local_irq_save(flags);
cpu_cache_wbinval_range(start, end, 1);
local_irq_restore(flags);
}
EXPORT_SYMBOL(flush_icache_range);
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
unsigned long flags;
unsigned long kaddr;
local_irq_save(flags);
kaddr = (unsigned long)kmap_atomic(page);
cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC);
kunmap_atomic((void *)kaddr);
local_irq_restore(flags);
}
EXPORT_SYMBOL(flush_icache_page);
void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
unsigned long addr, int len)
{
unsigned long kaddr;
kaddr = (unsigned long)kmap_atomic(page) + (addr & ~PAGE_MASK);
flush_icache_range(kaddr, kaddr + len);
kunmap_atomic((void *)kaddr);
}
void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
pte_t * pte)
{
@ -35,19 +67,15 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
if ((test_and_clear_bit(PG_dcache_dirty, &page->flags)) ||
(vma->vm_flags & VM_EXEC)) {
if (!PageHighMem(page)) {
cpu_cache_wbinval_page((unsigned long)
page_address(page),
vma->vm_flags & VM_EXEC);
} else {
unsigned long kaddr = (unsigned long)kmap_atomic(page);
cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC);
kunmap_atomic((void *)kaddr);
}
unsigned long kaddr;
local_irq_save(flags);
kaddr = (unsigned long)kmap_atomic(page);
cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC);
kunmap_atomic((void *)kaddr);
local_irq_restore(flags);
}
}
#else
#ifdef CONFIG_CPU_CACHE_ALIASING
extern pte_t va_present(struct mm_struct *mm, unsigned long addr);
static inline unsigned long aliasing(unsigned long addr, unsigned long page)
@ -317,52 +345,4 @@ void invalidate_kernel_vmap_range(void *addr, int size)
local_irq_restore(flags);
}
EXPORT_SYMBOL(invalidate_kernel_vmap_range);
void flush_icache_range(unsigned long start, unsigned long end)
{
unsigned long line_size, flags;
line_size = L1_cache_info[DCACHE].line_size;
start = start & ~(line_size - 1);
end = (end + line_size - 1) & ~(line_size - 1);
local_irq_save(flags);
cpu_cache_wbinval_range(start, end, 1);
local_irq_restore(flags);
}
EXPORT_SYMBOL(flush_icache_range);
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
unsigned long flags;
local_irq_save(flags);
cpu_cache_wbinval_page((unsigned long)page_address(page),
vma->vm_flags & VM_EXEC);
local_irq_restore(flags);
}
void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
pte_t * pte)
{
struct page *page;
unsigned long flags;
unsigned long pfn = pte_pfn(*pte);
if (!pfn_valid(pfn))
return;
if (vma->vm_mm == current->active_mm) {
local_irq_save(flags);
__nds32__mtsr_dsb(addr, NDS32_SR_TLB_VPN);
__nds32__tlbop_rwr(*pte);
__nds32__isb();
local_irq_restore(flags);
}
page = pfn_to_page(pfn);
if (test_and_clear_bit(PG_dcache_dirty, &page->flags) ||
(vma->vm_flags & VM_EXEC)) {
local_irq_save(flags);
cpu_dcache_wbinval_page((unsigned long)page_address(page));
local_irq_restore(flags);
}
}
#endif

View File

@ -243,6 +243,7 @@ endif
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec)
cpu-as-$(CONFIG_E200) += -Wa,-me200
cpu-as-$(CONFIG_E500) += -Wa,-me500
cpu-as-$(CONFIG_PPC_BOOK3S_64) += -Wa,-mpower4
cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc)

View File

@ -35,9 +35,9 @@ extern struct mm_iommu_table_group_mem_t *mm_iommu_lookup_rm(
extern struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm,
unsigned long ua, unsigned long entries);
extern long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem,
unsigned long ua, unsigned long *hpa);
unsigned long ua, unsigned int pageshift, unsigned long *hpa);
extern long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem,
unsigned long ua, unsigned long *hpa);
unsigned long ua, unsigned int pageshift, unsigned long *hpa);
extern long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem);
extern void mm_iommu_mapped_dec(struct mm_iommu_table_group_mem_t *mem);
#endif

View File

@ -144,7 +144,9 @@ power9_restore_additional_sprs:
mtspr SPRN_MMCR1, r4
ld r3, STOP_MMCR2(r13)
ld r4, PACA_SPRG_VDSO(r13)
mtspr SPRN_MMCR2, r3
mtspr SPRN_SPRG3, r4
blr
/*

View File

@ -449,7 +449,7 @@ long kvmppc_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl,
/* This only handles v2 IOMMU type, v1 is handled via ioctl() */
return H_TOO_HARD;
if (WARN_ON_ONCE(mm_iommu_ua_to_hpa(mem, ua, &hpa)))
if (WARN_ON_ONCE(mm_iommu_ua_to_hpa(mem, ua, tbl->it_page_shift, &hpa)))
return H_HARDWARE;
if (mm_iommu_mapped_inc(mem))

View File

@ -279,7 +279,8 @@ static long kvmppc_rm_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl,
if (!mem)
return H_TOO_HARD;
if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, &hpa)))
if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, tbl->it_page_shift,
&hpa)))
return H_HARDWARE;
pua = (void *) vmalloc_to_phys(pua);
@ -469,7 +470,8 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu,
mem = mm_iommu_lookup_rm(vcpu->kvm->mm, ua, IOMMU_PAGE_SIZE_4K);
if (mem)
prereg = mm_iommu_ua_to_hpa_rm(mem, ua, &tces) == 0;
prereg = mm_iommu_ua_to_hpa_rm(mem, ua,
IOMMU_PAGE_SHIFT_4K, &tces) == 0;
}
if (!prereg) {

View File

@ -19,6 +19,7 @@
#include <linux/hugetlb.h>
#include <linux/swap.h>
#include <asm/mmu_context.h>
#include <asm/pte-walk.h>
static DEFINE_MUTEX(mem_list_mutex);
@ -27,6 +28,7 @@ struct mm_iommu_table_group_mem_t {
struct rcu_head rcu;
unsigned long used;
atomic64_t mapped;
unsigned int pageshift;
u64 ua; /* userspace address */
u64 entries; /* number of entries in hpas[] */
u64 *hpas; /* vmalloc'ed */
@ -125,6 +127,8 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries,
{
struct mm_iommu_table_group_mem_t *mem;
long i, j, ret = 0, locked_entries = 0;
unsigned int pageshift;
unsigned long flags;
struct page *page = NULL;
mutex_lock(&mem_list_mutex);
@ -159,6 +163,12 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries,
goto unlock_exit;
}
/*
* For a starting point for a maximum page size calculation
* we use @ua and @entries natural alignment to allow IOMMU pages
* smaller than huge pages but still bigger than PAGE_SIZE.
*/
mem->pageshift = __ffs(ua | (entries << PAGE_SHIFT));
mem->hpas = vzalloc(array_size(entries, sizeof(mem->hpas[0])));
if (!mem->hpas) {
kfree(mem);
@ -199,6 +209,23 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries,
}
}
populate:
pageshift = PAGE_SHIFT;
if (PageCompound(page)) {
pte_t *pte;
struct page *head = compound_head(page);
unsigned int compshift = compound_order(head);
local_irq_save(flags); /* disables as well */
pte = find_linux_pte(mm->pgd, ua, NULL, &pageshift);
local_irq_restore(flags);
/* Double check it is still the same pinned page */
if (pte && pte_page(*pte) == head &&
pageshift == compshift)
pageshift = max_t(unsigned int, pageshift,
PAGE_SHIFT);
}
mem->pageshift = min(mem->pageshift, pageshift);
mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT;
}
@ -349,7 +376,7 @@ struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm,
EXPORT_SYMBOL_GPL(mm_iommu_find);
long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem,
unsigned long ua, unsigned long *hpa)
unsigned long ua, unsigned int pageshift, unsigned long *hpa)
{
const long entry = (ua - mem->ua) >> PAGE_SHIFT;
u64 *va = &mem->hpas[entry];
@ -357,6 +384,9 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem,
if (entry >= mem->entries)
return -EFAULT;
if (pageshift > mem->pageshift)
return -EFAULT;
*hpa = *va | (ua & ~PAGE_MASK);
return 0;
@ -364,7 +394,7 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem,
EXPORT_SYMBOL_GPL(mm_iommu_ua_to_hpa);
long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem,
unsigned long ua, unsigned long *hpa)
unsigned long ua, unsigned int pageshift, unsigned long *hpa)
{
const long entry = (ua - mem->ua) >> PAGE_SHIFT;
void *va = &mem->hpas[entry];
@ -373,6 +403,9 @@ long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem,
if (entry >= mem->entries)
return -EFAULT;
if (pageshift > mem->pageshift)
return -EFAULT;
pa = (void *) vmalloc_to_phys(va);
if (!pa)
return -EFAULT;

View File

@ -286,6 +286,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
u64 imm64;
u8 *func;
u32 true_cond;
u32 tmp_idx;
/*
* addrs[] maps a BPF bytecode address into a real offset from
@ -637,11 +638,7 @@ emit_clear:
case BPF_STX | BPF_XADD | BPF_W:
/* Get EA into TMP_REG_1 */
PPC_ADDI(b2p[TMP_REG_1], dst_reg, off);
/* error if EA is not word-aligned */
PPC_ANDI(b2p[TMP_REG_2], b2p[TMP_REG_1], 0x03);
PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + 12);
PPC_LI(b2p[BPF_REG_0], 0);
PPC_JMP(exit_addr);
tmp_idx = ctx->idx * 4;
/* load value from memory into TMP_REG_2 */
PPC_BPF_LWARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0);
/* add value from src_reg into this */
@ -649,32 +646,16 @@ emit_clear:
/* store result back */
PPC_BPF_STWCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]);
/* we're done if this succeeded */
PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (7*4));
/* otherwise, let's try once more */
PPC_BPF_LWARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0);
PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg);
PPC_BPF_STWCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]);
/* exit if the store was not successful */
PPC_LI(b2p[BPF_REG_0], 0);
PPC_BCC(COND_NE, exit_addr);
PPC_BCC_SHORT(COND_NE, tmp_idx);
break;
/* *(u64 *)(dst + off) += src */
case BPF_STX | BPF_XADD | BPF_DW:
PPC_ADDI(b2p[TMP_REG_1], dst_reg, off);
/* error if EA is not doubleword-aligned */
PPC_ANDI(b2p[TMP_REG_2], b2p[TMP_REG_1], 0x07);
PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (3*4));
PPC_LI(b2p[BPF_REG_0], 0);
PPC_JMP(exit_addr);
tmp_idx = ctx->idx * 4;
PPC_BPF_LDARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0);
PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg);
PPC_BPF_STDCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]);
PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (7*4));
PPC_BPF_LDARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0);
PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg);
PPC_BPF_STDCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]);
PPC_LI(b2p[BPF_REG_0], 0);
PPC_BCC(COND_NE, exit_addr);
PPC_BCC_SHORT(COND_NE, tmp_idx);
break;
/*

View File

@ -2734,7 +2734,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr,
{
int nr, dotted;
unsigned long first_adr;
unsigned long inst, last_inst = 0;
unsigned int inst, last_inst = 0;
unsigned char val[4];
dotted = 0;
@ -2758,7 +2758,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr,
dotted = 0;
last_inst = inst;
if (praddr)
printf(REG" %.8lx", adr, inst);
printf(REG" %.8x", adr, inst);
printf("\t");
dump_func(inst, adr);
printf("\n");

View File

@ -140,7 +140,7 @@ config S390
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_GCC_PLUGINS
select HAVE_GCC_PLUGINS if BROKEN
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZ4

View File

@ -63,7 +63,7 @@ config X86
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_REFCOUNT
select ARCH_HAS_UACCESS_FLUSHCACHE if X86_64
select ARCH_HAS_UACCESS_MCSAFE if X86_64
select ARCH_HAS_UACCESS_MCSAFE if X86_64 && X86_MCE
select ARCH_HAS_SET_MEMORY
select ARCH_HAS_SG_CHAIN
select ARCH_HAS_STRICT_KERNEL_RWX

View File

@ -408,9 +408,11 @@ static int alloc_bts_buffer(int cpu)
ds->bts_buffer_base = (unsigned long) cea;
ds_update_cea(cea, buffer, BTS_BUFFER_SIZE, PAGE_KERNEL);
ds->bts_index = ds->bts_buffer_base;
max = BTS_RECORD_SIZE * (BTS_BUFFER_SIZE / BTS_RECORD_SIZE);
ds->bts_absolute_maximum = ds->bts_buffer_base + max;
ds->bts_interrupt_threshold = ds->bts_absolute_maximum - (max / 16);
max = BTS_BUFFER_SIZE / BTS_RECORD_SIZE;
ds->bts_absolute_maximum = ds->bts_buffer_base +
max * BTS_RECORD_SIZE;
ds->bts_interrupt_threshold = ds->bts_absolute_maximum -
(max / 16) * BTS_RECORD_SIZE;
return 0;
}

View File

@ -7,8 +7,6 @@
#ifndef _ASM_X86_MACH_DEFAULT_APM_H
#define _ASM_X86_MACH_DEFAULT_APM_H
#include <asm/nospec-branch.h>
#ifdef APM_ZERO_SEGS
# define APM_DO_ZERO_SEGS \
"pushl %%ds\n\t" \
@ -34,7 +32,6 @@ static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
* N.B. We do NOT need a cld after the BIOS call
* because we always save and restore the flags.
*/
firmware_restrict_branch_speculation_start();
__asm__ __volatile__(APM_DO_ZERO_SEGS
"pushl %%edi\n\t"
"pushl %%ebp\n\t"
@ -47,7 +44,6 @@ static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
"=S" (*esi)
: "a" (func), "b" (ebx_in), "c" (ecx_in)
: "memory", "cc");
firmware_restrict_branch_speculation_end();
}
static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in,
@ -60,7 +56,6 @@ static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in,
* N.B. We do NOT need a cld after the BIOS call
* because we always save and restore the flags.
*/
firmware_restrict_branch_speculation_start();
__asm__ __volatile__(APM_DO_ZERO_SEGS
"pushl %%edi\n\t"
"pushl %%ebp\n\t"
@ -73,7 +68,6 @@ static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in,
"=S" (si)
: "a" (func), "b" (ebx_in), "c" (ecx_in)
: "memory", "cc");
firmware_restrict_branch_speculation_end();
return error;
}

View File

@ -52,7 +52,12 @@ copy_to_user_mcsafe(void *to, const void *from, unsigned len)
unsigned long ret;
__uaccess_begin();
ret = memcpy_mcsafe(to, from, len);
/*
* Note, __memcpy_mcsafe() is explicitly used since it can
* handle exceptions / faults. memcpy_mcsafe() may fall back to
* memcpy() which lacks this handling.
*/
ret = __memcpy_mcsafe(to, from, len);
__uaccess_end();
return ret;
}

View File

@ -240,6 +240,7 @@
#include <asm/olpc.h>
#include <asm/paravirt.h>
#include <asm/reboot.h>
#include <asm/nospec-branch.h>
#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
extern int (*console_blank_hook)(int);
@ -614,11 +615,13 @@ static long __apm_bios_call(void *_call)
gdt[0x40 / 8] = bad_bios_desc;
apm_irq_save(flags);
firmware_restrict_branch_speculation_start();
APM_DO_SAVE_SEGS;
apm_bios_call_asm(call->func, call->ebx, call->ecx,
&call->eax, &call->ebx, &call->ecx, &call->edx,
&call->esi);
APM_DO_RESTORE_SEGS;
firmware_restrict_branch_speculation_end();
apm_irq_restore(flags);
gdt[0x40 / 8] = save_desc_40;
put_cpu();
@ -690,10 +693,12 @@ static long __apm_bios_call_simple(void *_call)
gdt[0x40 / 8] = bad_bios_desc;
apm_irq_save(flags);
firmware_restrict_branch_speculation_start();
APM_DO_SAVE_SEGS;
error = apm_bios_call_simple_asm(call->func, call->ebx, call->ecx,
&call->eax);
APM_DO_RESTORE_SEGS;
firmware_restrict_branch_speculation_end();
apm_irq_restore(flags);
gdt[0x40 / 8] = save_desc_40;
put_cpu();

View File

@ -2165,9 +2165,6 @@ static ssize_t store_int_with_restart(struct device *s,
if (check_interval == old_check_interval)
return ret;
if (check_interval < 1)
check_interval = 1;
mutex_lock(&mce_sysfs_mutex);
mce_restart();
mutex_unlock(&mce_sysfs_mutex);

View File

@ -138,6 +138,7 @@ static unsigned long kvm_get_tsc_khz(void)
src = &hv_clock[cpu].pvti;
tsc_khz = pvclock_tsc_khz(src);
put_cpu();
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
return tsc_khz;
}
@ -319,6 +320,8 @@ void __init kvmclock_init(void)
printk(KERN_INFO "kvm-clock: Using msrs %x and %x",
msr_kvm_system_time, msr_kvm_wall_clock);
pvclock_set_pvti_cpu0_va(hv_clock);
if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT))
pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT);
@ -366,14 +369,11 @@ int __init kvm_setup_vsyscall_timeinfo(void)
vcpu_time = &hv_clock[cpu].pvti;
flags = pvclock_read_flags(vcpu_time);
if (!(flags & PVCLOCK_TSC_STABLE_BIT)) {
put_cpu();
return 1;
}
pvclock_set_pvti_cpu0_va(hv_clock);
put_cpu();
if (!(flags & PVCLOCK_TSC_STABLE_BIT))
return 1;
kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK;
#endif
return 0;

View File

@ -85,7 +85,7 @@ config KVM_AMD_SEV
def_bool y
bool "AMD Secure Encrypted Virtualization (SEV) support"
depends on KVM_AMD && X86_64
depends on CRYPTO_DEV_CCP && CRYPTO_DEV_CCP_DD && CRYPTO_DEV_SP_PSP
depends on CRYPTO_DEV_SP_PSP && !(KVM_AMD=y && CRYPTO_DEV_CCP_DD=m)
---help---
Provides support for launching Encrypted VMs on AMD processors.

View File

@ -890,7 +890,7 @@ static int mmu_topup_memory_cache_page(struct kvm_mmu_memory_cache *cache,
if (cache->nobjs >= min)
return 0;
while (cache->nobjs < ARRAY_SIZE(cache->objects)) {
page = (void *)__get_free_page(GFP_KERNEL);
page = (void *)__get_free_page(GFP_KERNEL_ACCOUNT);
if (!page)
return -ENOMEM;
cache->objects[cache->nobjs++] = page;

View File

@ -2571,6 +2571,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
struct vcpu_vmx *vmx = to_vmx(vcpu);
#ifdef CONFIG_X86_64
int cpu = raw_smp_processor_id();
unsigned long fs_base, kernel_gs_base;
#endif
int i;
@ -2586,12 +2587,20 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel;
#ifdef CONFIG_X86_64
save_fsgs_for_kvm();
vmx->host_state.fs_sel = current->thread.fsindex;
vmx->host_state.gs_sel = current->thread.gsindex;
#else
savesegment(fs, vmx->host_state.fs_sel);
savesegment(gs, vmx->host_state.gs_sel);
if (likely(is_64bit_mm(current->mm))) {
save_fsgs_for_kvm();
vmx->host_state.fs_sel = current->thread.fsindex;
vmx->host_state.gs_sel = current->thread.gsindex;
fs_base = current->thread.fsbase;
kernel_gs_base = current->thread.gsbase;
} else {
#endif
savesegment(fs, vmx->host_state.fs_sel);
savesegment(gs, vmx->host_state.gs_sel);
#ifdef CONFIG_X86_64
fs_base = read_msr(MSR_FS_BASE);
kernel_gs_base = read_msr(MSR_KERNEL_GS_BASE);
}
#endif
if (!(vmx->host_state.fs_sel & 7)) {
vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel);
@ -2611,10 +2620,10 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
savesegment(ds, vmx->host_state.ds_sel);
savesegment(es, vmx->host_state.es_sel);
vmcs_writel(HOST_FS_BASE, current->thread.fsbase);
vmcs_writel(HOST_FS_BASE, fs_base);
vmcs_writel(HOST_GS_BASE, cpu_kernelmode_gs_base(cpu));
vmx->msr_host_kernel_gs_base = current->thread.gsbase;
vmx->msr_host_kernel_gs_base = kernel_gs_base;
if (is_long_mode(&vmx->vcpu))
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
#else
@ -4322,11 +4331,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
vmcs_conf->order = get_order(vmcs_conf->size);
vmcs_conf->basic_cap = vmx_msr_high & ~0x1fff;
/* KVM supports Enlightened VMCS v1 only */
if (static_branch_unlikely(&enable_evmcs))
vmcs_conf->revision_id = KVM_EVMCS_VERSION;
else
vmcs_conf->revision_id = vmx_msr_low;
vmcs_conf->revision_id = vmx_msr_low;
vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control;
vmcs_conf->cpu_based_exec_ctrl = _cpu_based_exec_control;
@ -4396,7 +4401,13 @@ static struct vmcs *alloc_vmcs_cpu(int cpu)
return NULL;
vmcs = page_address(pages);
memset(vmcs, 0, vmcs_config.size);
vmcs->revision_id = vmcs_config.revision_id; /* vmcs revision id */
/* KVM supports Enlightened VMCS v1 only */
if (static_branch_unlikely(&enable_evmcs))
vmcs->revision_id = KVM_EVMCS_VERSION;
else
vmcs->revision_id = vmcs_config.revision_id;
return vmcs;
}
@ -4564,6 +4575,19 @@ static __init int alloc_kvm_area(void)
return -ENOMEM;
}
/*
* When eVMCS is enabled, alloc_vmcs_cpu() sets
* vmcs->revision_id to KVM_EVMCS_VERSION instead of
* revision_id reported by MSR_IA32_VMX_BASIC.
*
* However, even though not explictly documented by
* TLFS, VMXArea passed as VMXON argument should
* still be marked with revision_id reported by
* physical CPU.
*/
if (static_branch_unlikely(&enable_evmcs))
vmcs->revision_id = vmcs_config.revision_id;
per_cpu(vmxarea, cpu) = vmcs;
}
return 0;
@ -11753,7 +11777,6 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
u32 msr_entry_idx;
u32 exit_qual;
int r;
@ -11775,10 +11798,10 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu)
nested_get_vmcs12_pages(vcpu, vmcs12);
r = EXIT_REASON_MSR_LOAD_FAIL;
msr_entry_idx = nested_vmx_load_msr(vcpu,
vmcs12->vm_entry_msr_load_addr,
vmcs12->vm_entry_msr_load_count);
if (msr_entry_idx)
exit_qual = nested_vmx_load_msr(vcpu,
vmcs12->vm_entry_msr_load_addr,
vmcs12->vm_entry_msr_load_count);
if (exit_qual)
goto fail;
/*

View File

@ -1097,6 +1097,7 @@ static u32 msr_based_features[] = {
MSR_F10H_DECFG,
MSR_IA32_UCODE_REV,
MSR_IA32_ARCH_CAPABILITIES,
};
static unsigned int num_msr_based_features;
@ -1105,7 +1106,8 @@ static int kvm_get_msr_feature(struct kvm_msr_entry *msr)
{
switch (msr->index) {
case MSR_IA32_UCODE_REV:
rdmsrl(msr->index, msr->data);
case MSR_IA32_ARCH_CAPABILITIES:
rdmsrl_safe(msr->index, &msr->data);
break;
default:
if (kvm_x86_ops->get_msr_feature(msr))

View File

@ -16,7 +16,7 @@ static int __init gate_vma_init(void)
if (!FIXADDR_USER_START)
return 0;
gate_vma.vm_mm = NULL;
vma_init(&gate_vma, NULL);
gate_vma.vm_start = FIXADDR_USER_START;
gate_vma.vm_end = FIXADDR_USER_END;
gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC;

View File

@ -903,25 +903,27 @@ int bio_add_page(struct bio *bio, struct page *page,
EXPORT_SYMBOL(bio_add_page);
/**
* bio_iov_iter_get_pages - pin user or kernel pages and add them to a bio
* __bio_iov_iter_get_pages - pin user or kernel pages and add them to a bio
* @bio: bio to add pages to
* @iter: iov iterator describing the region to be mapped
*
* Pins as many pages from *iter and appends them to @bio's bvec array. The
* Pins pages from *iter and appends them to @bio's bvec array. The
* pages will have to be released using put_page() when done.
* For multi-segment *iter, this function only adds pages from the
* the next non-empty segment of the iov iterator.
*/
int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
static int __bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
{
unsigned short nr_pages = bio->bi_max_vecs - bio->bi_vcnt;
unsigned short nr_pages = bio->bi_max_vecs - bio->bi_vcnt, idx;
struct bio_vec *bv = bio->bi_io_vec + bio->bi_vcnt;
struct page **pages = (struct page **)bv;
size_t offset, diff;
size_t offset;
ssize_t size;
size = iov_iter_get_pages(iter, pages, LONG_MAX, nr_pages, &offset);
if (unlikely(size <= 0))
return size ? size : -EFAULT;
nr_pages = (size + offset + PAGE_SIZE - 1) / PAGE_SIZE;
idx = nr_pages = (size + offset + PAGE_SIZE - 1) / PAGE_SIZE;
/*
* Deep magic below: We need to walk the pinned pages backwards
@ -934,21 +936,46 @@ int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
bio->bi_iter.bi_size += size;
bio->bi_vcnt += nr_pages;
diff = (nr_pages * PAGE_SIZE - offset) - size;
while (nr_pages--) {
bv[nr_pages].bv_page = pages[nr_pages];
bv[nr_pages].bv_len = PAGE_SIZE;
bv[nr_pages].bv_offset = 0;
while (idx--) {
bv[idx].bv_page = pages[idx];
bv[idx].bv_len = PAGE_SIZE;
bv[idx].bv_offset = 0;
}
bv[0].bv_offset += offset;
bv[0].bv_len -= offset;
if (diff)
bv[bio->bi_vcnt - 1].bv_len -= diff;
bv[nr_pages - 1].bv_len -= nr_pages * PAGE_SIZE - offset - size;
iov_iter_advance(iter, size);
return 0;
}
/**
* bio_iov_iter_get_pages - pin user or kernel pages and add them to a bio
* @bio: bio to add pages to
* @iter: iov iterator describing the region to be mapped
*
* Pins pages from *iter and appends them to @bio's bvec array. The
* pages will have to be released using put_page() when done.
* The function tries, but does not guarantee, to pin as many pages as
* fit into the bio, or are requested in *iter, whatever is smaller.
* If MM encounters an error pinning the requested pages, it stops.
* Error is returned only if 0 pages could be pinned.
*/
int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
{
unsigned short orig_vcnt = bio->bi_vcnt;
do {
int ret = __bio_iov_iter_get_pages(bio, iter);
if (unlikely(ret))
return bio->bi_vcnt > orig_vcnt ? 0 : ret;
} while (iov_iter_count(iter) && !bio_full(bio));
return 0;
}
EXPORT_SYMBOL_GPL(bio_iov_iter_get_pages);
static void submit_bio_wait_endio(struct bio *bio)
@ -1866,6 +1893,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
bio_integrity_trim(split);
bio_advance(bio, split->bi_iter.bi_size);
bio->bi_iter.bi_done = 0;
if (bio_flagged(bio, BIO_TRACE_COMPLETION))
bio_set_flag(split, BIO_TRACE_COMPLETION);

View File

@ -558,10 +558,8 @@ static void __blk_mq_complete_request(struct request *rq)
bool shared = false;
int cpu;
if (cmpxchg(&rq->state, MQ_RQ_IN_FLIGHT, MQ_RQ_COMPLETE) !=
MQ_RQ_IN_FLIGHT)
if (!blk_mq_mark_complete(rq))
return;
if (rq->internal_tag != -1)
blk_mq_sched_completed_request(rq);

View File

@ -1155,8 +1155,10 @@ int af_alg_get_rsgl(struct sock *sk, struct msghdr *msg, int flags,
/* make one iovec available as scatterlist */
err = af_alg_make_sg(&rsgl->sgl, &msg->msg_iter, seglen);
if (err < 0)
if (err < 0) {
rsgl->sg_num_bytes = 0;
return err;
}
/* chain the new scatterlist with previous one */
if (areq->last_rsgl)

View File

@ -497,6 +497,18 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
status =
acpi_ps_create_op(walk_state, aml_op_start, &op);
if (ACPI_FAILURE(status)) {
/*
* ACPI_PARSE_MODULE_LEVEL means that we are loading a table by
* executing it as a control method. However, if we encounter
* an error while loading the table, we need to keep trying to
* load the table rather than aborting the table load. Set the
* status to AE_OK to proceed with the table load.
*/
if ((walk_state->
parse_flags & ACPI_PARSE_MODULE_LEVEL)
&& status == AE_ALREADY_EXISTS) {
status = AE_OK;
}
if (status == AE_CTRL_PARSE_CONTINUE) {
continue;
}
@ -694,6 +706,20 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
acpi_ps_next_parse_state(walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
} else
if ((walk_state->
parse_flags & ACPI_PARSE_MODULE_LEVEL)
&& ACPI_FAILURE(status)) {
/*
* ACPI_PARSE_MODULE_LEVEL means that we are loading a table by
* executing it as a control method. However, if we encounter
* an error while loading the table, we need to keep trying to
* load the table rather than aborting the table load. Set the
* status to AE_OK to proceed with the table load. If we get a
* failure at this point, it means that the dispatcher got an
* error while processing Op (most likely an AML operand error.
*/
status = AE_OK;
}
}

View File

@ -2042,7 +2042,7 @@ static const struct dmi_system_id acpi_ec_no_wakeup[] = {
.ident = "Thinkpad X1 Carbon 6th",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "20KGS3JF01"),
DMI_MATCH(DMI_PRODUCT_FAMILY, "Thinkpad X1 Carbon 6th"),
},
},
{ },

View File

@ -434,14 +434,6 @@ re_probe:
goto probe_failed;
}
/*
* Ensure devices are listed in devices_kset in correct order
* It's important to move Dev to the end of devices_kset before
* calling .probe, because it could be recursive and parent Dev
* should always go first
*/
devices_kset_move_last(dev);
if (dev->bus->probe) {
ret = dev->bus->probe(dev);
if (ret)

View File

@ -112,12 +112,16 @@ struct nbd_device {
struct task_struct *task_setup;
};
#define NBD_CMD_REQUEUED 1
struct nbd_cmd {
struct nbd_device *nbd;
struct mutex lock;
int index;
int cookie;
struct completion send_complete;
blk_status_t status;
unsigned long flags;
u32 cmd_cookie;
};
#if IS_ENABLED(CONFIG_DEBUG_FS)
@ -146,6 +150,35 @@ static inline struct device *nbd_to_dev(struct nbd_device *nbd)
return disk_to_dev(nbd->disk);
}
static void nbd_requeue_cmd(struct nbd_cmd *cmd)
{
struct request *req = blk_mq_rq_from_pdu(cmd);
if (!test_and_set_bit(NBD_CMD_REQUEUED, &cmd->flags))
blk_mq_requeue_request(req, true);
}
#define NBD_COOKIE_BITS 32
static u64 nbd_cmd_handle(struct nbd_cmd *cmd)
{
struct request *req = blk_mq_rq_from_pdu(cmd);
u32 tag = blk_mq_unique_tag(req);
u64 cookie = cmd->cmd_cookie;
return (cookie << NBD_COOKIE_BITS) | tag;
}
static u32 nbd_handle_to_tag(u64 handle)
{
return (u32)handle;
}
static u32 nbd_handle_to_cookie(u64 handle)
{
return (u32)(handle >> NBD_COOKIE_BITS);
}
static const char *nbdcmd_to_ascii(int cmd)
{
switch (cmd) {
@ -319,6 +352,9 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
}
config = nbd->config;
if (!mutex_trylock(&cmd->lock))
return BLK_EH_RESET_TIMER;
if (config->num_connections > 1) {
dev_err_ratelimited(nbd_to_dev(nbd),
"Connection timed out, retrying (%d/%d alive)\n",
@ -343,7 +379,8 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
nbd_mark_nsock_dead(nbd, nsock, 1);
mutex_unlock(&nsock->tx_lock);
}
blk_mq_requeue_request(req, true);
mutex_unlock(&cmd->lock);
nbd_requeue_cmd(cmd);
nbd_config_put(nbd);
return BLK_EH_DONE;
}
@ -353,6 +390,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
}
set_bit(NBD_TIMEDOUT, &config->runtime_flags);
cmd->status = BLK_STS_IOERR;
mutex_unlock(&cmd->lock);
sock_shutdown(nbd);
nbd_config_put(nbd);
done:
@ -430,9 +468,9 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
struct iov_iter from;
unsigned long size = blk_rq_bytes(req);
struct bio *bio;
u64 handle;
u32 type;
u32 nbd_cmd_flags = 0;
u32 tag = blk_mq_unique_tag(req);
int sent = nsock->sent, skip = 0;
iov_iter_kvec(&from, WRITE | ITER_KVEC, &iov, 1, sizeof(request));
@ -474,6 +512,8 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
goto send_pages;
}
iov_iter_advance(&from, sent);
} else {
cmd->cmd_cookie++;
}
cmd->index = index;
cmd->cookie = nsock->cookie;
@ -482,7 +522,8 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
request.len = htonl(size);
}
memcpy(request.handle, &tag, sizeof(tag));
handle = nbd_cmd_handle(cmd);
memcpy(request.handle, &handle, sizeof(handle));
dev_dbg(nbd_to_dev(nbd), "request %p: sending control (%s@%llu,%uB)\n",
req, nbdcmd_to_ascii(type),
@ -500,6 +541,7 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
nsock->pending = req;
nsock->sent = sent;
}
set_bit(NBD_CMD_REQUEUED, &cmd->flags);
return BLK_STS_RESOURCE;
}
dev_err_ratelimited(disk_to_dev(nbd->disk),
@ -541,6 +583,7 @@ send_pages:
*/
nsock->pending = req;
nsock->sent = sent;
set_bit(NBD_CMD_REQUEUED, &cmd->flags);
return BLK_STS_RESOURCE;
}
dev_err(disk_to_dev(nbd->disk),
@ -573,10 +616,12 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
struct nbd_reply reply;
struct nbd_cmd *cmd;
struct request *req = NULL;
u64 handle;
u16 hwq;
u32 tag;
struct kvec iov = {.iov_base = &reply, .iov_len = sizeof(reply)};
struct iov_iter to;
int ret = 0;
reply.magic = 0;
iov_iter_kvec(&to, READ | ITER_KVEC, &iov, 1, sizeof(reply));
@ -594,8 +639,8 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
return ERR_PTR(-EPROTO);
}
memcpy(&tag, reply.handle, sizeof(u32));
memcpy(&handle, reply.handle, sizeof(handle));
tag = nbd_handle_to_tag(handle);
hwq = blk_mq_unique_tag_to_hwq(tag);
if (hwq < nbd->tag_set.nr_hw_queues)
req = blk_mq_tag_to_rq(nbd->tag_set.tags[hwq],
@ -606,11 +651,25 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
return ERR_PTR(-ENOENT);
}
cmd = blk_mq_rq_to_pdu(req);
mutex_lock(&cmd->lock);
if (cmd->cmd_cookie != nbd_handle_to_cookie(handle)) {
dev_err(disk_to_dev(nbd->disk), "Double reply on req %p, cmd_cookie %u, handle cookie %u\n",
req, cmd->cmd_cookie, nbd_handle_to_cookie(handle));
ret = -ENOENT;
goto out;
}
if (test_bit(NBD_CMD_REQUEUED, &cmd->flags)) {
dev_err(disk_to_dev(nbd->disk), "Raced with timeout on req %p\n",
req);
ret = -ENOENT;
goto out;
}
if (ntohl(reply.error)) {
dev_err(disk_to_dev(nbd->disk), "Other side returned error (%d)\n",
ntohl(reply.error));
cmd->status = BLK_STS_IOERR;
return cmd;
goto out;
}
dev_dbg(nbd_to_dev(nbd), "request %p: got reply\n", req);
@ -635,18 +694,18 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
if (nbd_disconnected(config) ||
config->num_connections <= 1) {
cmd->status = BLK_STS_IOERR;
return cmd;
goto out;
}
return ERR_PTR(-EIO);
ret = -EIO;
goto out;
}
dev_dbg(nbd_to_dev(nbd), "request %p: got %d bytes data\n",
req, bvec.bv_len);
}
} else {
/* See the comment in nbd_queue_rq. */
wait_for_completion(&cmd->send_complete);
}
return cmd;
out:
mutex_unlock(&cmd->lock);
return ret ? ERR_PTR(ret) : cmd;
}
static void recv_work(struct work_struct *work)
@ -805,7 +864,7 @@ again:
*/
blk_mq_start_request(req);
if (unlikely(nsock->pending && nsock->pending != req)) {
blk_mq_requeue_request(req, true);
nbd_requeue_cmd(cmd);
ret = 0;
goto out;
}
@ -818,7 +877,7 @@ again:
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Request send failed, requeueing\n");
nbd_mark_nsock_dead(nbd, nsock, 1);
blk_mq_requeue_request(req, true);
nbd_requeue_cmd(cmd);
ret = 0;
}
out:
@ -842,7 +901,8 @@ static blk_status_t nbd_queue_rq(struct blk_mq_hw_ctx *hctx,
* that the server is misbehaving (or there was an error) before we're
* done sending everything over the wire.
*/
init_completion(&cmd->send_complete);
mutex_lock(&cmd->lock);
clear_bit(NBD_CMD_REQUEUED, &cmd->flags);
/* We can be called directly from the user space process, which means we
* could possibly have signals pending so our sendmsg will fail. In
@ -854,7 +914,7 @@ static blk_status_t nbd_queue_rq(struct blk_mq_hw_ctx *hctx,
ret = BLK_STS_IOERR;
else if (!ret)
ret = BLK_STS_OK;
complete(&cmd->send_complete);
mutex_unlock(&cmd->lock);
return ret;
}
@ -1460,6 +1520,8 @@ static int nbd_init_request(struct blk_mq_tag_set *set, struct request *rq,
{
struct nbd_cmd *cmd = blk_mq_rq_to_pdu(rq);
cmd->nbd = set->driver_data;
cmd->flags = 0;
mutex_init(&cmd->lock);
return 0;
}

View File

@ -11,7 +11,7 @@
#include "agp.h"
static int alpha_core_agp_vm_fault(struct vm_fault *vmf)
static vm_fault_t alpha_core_agp_vm_fault(struct vm_fault *vmf)
{
alpha_agp_info *agp = agp_bridge->dev_private_data;
dma_addr_t dma_addr;

View File

@ -156,7 +156,7 @@ static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table)
/* Address to map to */
pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp);
aperturebase = tmp << 25;
aperturebase = (u64)tmp << 25;
aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK);
enable_gart_translation(hammer, gatt_table);
@ -277,7 +277,7 @@ static int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u16 cap)
pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order);
nb_order = (nb_order >> 1) & 7;
pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
nb_aper = nb_base << 25;
nb_aper = (u64)nb_base << 25;
/* Northbridge seems to contain crap. Try the AGP bridge. */

View File

@ -708,6 +708,7 @@ static int mmap_zero(struct file *file, struct vm_area_struct *vma)
#endif
if (vma->vm_flags & VM_SHARED)
return shmem_zero_setup(vma);
vma_set_anonymous(vma);
return 0;
}

View File

@ -1895,14 +1895,22 @@ static int
write_pool(struct entropy_store *r, const char __user *buffer, size_t count)
{
size_t bytes;
__u32 buf[16];
__u32 t, buf[16];
const char __user *p = buffer;
while (count > 0) {
int b, i = 0;
bytes = min(count, sizeof(buf));
if (copy_from_user(&buf, p, bytes))
return -EFAULT;
for (b = bytes ; b > 0 ; b -= sizeof(__u32), i++) {
if (!arch_get_random_int(&t))
break;
buf[i] ^= t;
}
count -= bytes;
p += bytes;

Some files were not shown because too many files have changed in this diff Show More