[SCSI] qla4xxx: Add get ACB state support using BSG

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This commit is contained in:
Harish Zunjarrao 2011-08-01 03:26:15 -07:00 committed by James Bottomley
parent ef7830bb62
commit 8b0402e138
4 changed files with 86 additions and 0 deletions

View File

@ -139,6 +139,63 @@ leave:
return rval;
}
static int
qla4xxx_get_acb_state(struct bsg_job *bsg_job)
{
struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
struct scsi_qla_host *ha = to_qla_host(host);
struct iscsi_bsg_request *bsg_req = bsg_job->request;
struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
uint32_t status[MBOX_REG_COUNT];
uint32_t acb_idx;
uint32_t ip_idx;
int rval = -EINVAL;
bsg_reply->reply_payload_rcv_len = 0;
if (unlikely(pci_channel_offline(ha->pdev)))
goto leave;
/* Only 4022 and above adapters are supported */
if (is_qla4010(ha))
goto leave;
if (ql4xxx_reset_active(ha)) {
ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
rval = -EBUSY;
goto leave;
}
if (bsg_job->reply_payload.payload_len < sizeof(status)) {
ql4_printk(KERN_ERR, ha, "%s: invalid payload len %d\n",
__func__, bsg_job->reply_payload.payload_len);
rval = -EINVAL;
goto leave;
}
acb_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
ip_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[2];
rval = qla4xxx_get_ip_state(ha, acb_idx, ip_idx, status);
if (rval) {
ql4_printk(KERN_ERR, ha, "%s: get ip state failed\n",
__func__);
bsg_reply->result = DID_ERROR << 16;
rval = -EIO;
} else {
bsg_reply->reply_payload_rcv_len =
sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
bsg_job->reply_payload.sg_cnt,
status, sizeof(status));
bsg_reply->result = DID_OK << 16;
}
bsg_job_done(bsg_job, bsg_reply->result,
bsg_reply->reply_payload_rcv_len);
leave:
return rval;
}
/**
* qla4xxx_process_vendor_specific - handle vendor specific bsg request
* @job: iscsi_bsg_job to handle
@ -157,6 +214,9 @@ int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
case QLISCSI_VND_UPDATE_FLASH:
return qla4xxx_update_flash(bsg_job);
case QLISCSI_VND_GET_ACB_STATE:
return qla4xxx_get_acb_state(bsg_job);
default:
ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
"0x%x\n", __func__, bsg_req->msgcode);

View File

@ -10,5 +10,6 @@
/* BSG Vendor specific commands */
#define QLISCSI_VND_READ_FLASH 1
#define QLISCSI_VND_UPDATE_FLASH 2
#define QLISCSI_VND_GET_ACB_STATE 3
#endif

View File

@ -58,6 +58,8 @@ int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
uint32_t *mbox_sts, dma_addr_t acb_dma);
int qla4xxx_get_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
uint32_t *mbox_sts, dma_addr_t acb_dma);
int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
uint32_t ip_idx, uint32_t *sts);
void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session);
u16 rd_nvram_word(struct scsi_qla_host *ha, int offset);
u8 rd_nvram_byte(struct scsi_qla_host *ha, int offset);

View File

@ -1667,3 +1667,26 @@ int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
}
return status;
}
int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
uint32_t ip_idx, uint32_t *sts)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
int status = QLA_SUCCESS;
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_GET_IP_ADDR_STATE;
mbox_cmd[1] = acb_idx;
mbox_cmd[2] = ip_idx;
status = qla4xxx_mailbox_command(ha, 3, 8, &mbox_cmd[0], &mbox_sts[0]);
if (status != QLA_SUCCESS) {
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: "
"MBOX_CMD_GET_IP_ADDR_STATE failed w/ "
"status %04X\n", __func__, mbox_sts[0]));
}
memcpy(sts, mbox_sts, sizeof(mbox_sts));
return status;
}