[MIPS] cleanup tx39/tx49 setup code

Remove some unnecessary codes, includes and files.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Atsushi Nemoto 2007-10-24 23:16:56 +09:00 committed by Ralf Baechle
parent 619b6e18fc
commit 8b6c2324bf
7 changed files with 7 additions and 280 deletions

View File

@ -29,21 +29,16 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#endif
#include <asm/addrspace.h>
#include <asm/txx9tmr.h>
#include <asm/reboot.h>
#include <asm/jmr3927/jmr3927.h>

View File

@ -6,7 +6,7 @@
# unless it's something special (ie not a .c file).
#
obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o
obj-y += tx4927_prom.o tx4927_irq.o
obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o
obj-$(CONFIG_KGDB) += tx4927_dbgio.o

View File

@ -1,186 +0,0 @@
/*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* Copyright 2001-2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/tx4927/tx4927.h>
#undef DEBUG
void dump_cp0(char *key);
void __init plat_mem_setup(void)
{
#ifdef CONFIG_TOSHIBA_RBTX4927
{
extern void toshiba_rbtx4927_setup(void);
toshiba_rbtx4927_setup();
}
#endif
}
void __init plat_time_init(void)
{
#ifdef CONFIG_TOSHIBA_RBTX4927
{
extern void toshiba_rbtx4927_time_init(void);
toshiba_rbtx4927_time_init();
}
#endif
}
#ifdef DEBUG
void print_cp0(char *key, int num, char *name, u32 val)
{
printk("%s cp0:%02d:%s=0x%08x\n", key, num, name, val);
return;
}
void
dump_cp0(char *key)
{
if (key == NULL)
key = "";
print_cp0(key, 0, "INDEX ", read_c0_index());
print_cp0(key, 2, "ENTRYLO1", read_c0_entrylo0());
print_cp0(key, 3, "ENTRYLO2", read_c0_entrylo1());
print_cp0(key, 4, "CONTEXT ", read_c0_context());
print_cp0(key, 5, "PAGEMASK", read_c0_pagemask());
print_cp0(key, 6, "WIRED ", read_c0_wired());
//print_cp0(key, 8, "BADVADDR", read_c0_badvaddr());
print_cp0(key, 9, "COUNT ", read_c0_count());
print_cp0(key, 10, "ENTRYHI ", read_c0_entryhi());
print_cp0(key, 11, "COMPARE ", read_c0_compare());
print_cp0(key, 12, "STATUS ", read_c0_status());
print_cp0(key, 13, "CAUSE ", read_c0_cause() & 0xffff87ff);
print_cp0(key, 16, "CONFIG ", read_c0_config());
return;
}
void print_pic(char *key, unsigned long reg, char *name)
{
printk(KERN_INFO "%s pic:0x%08lx:%s=0x%08x\n", key, reg, name,
__raw_readl((void __iomem *)reg));
return;
}
void dump_pic(char *key)
{
if (key == NULL)
key = "";
print_pic(key, 0xff1ff600, "IRDEN ");
print_pic(key, 0xff1ff604, "IRDM0 ");
print_pic(key, 0xff1ff608, "IRDM1 ");
print_pic(key, 0xff1ff610, "IRLVL0 ");
print_pic(key, 0xff1ff614, "IRLVL1 ");
print_pic(key, 0xff1ff618, "IRLVL2 ");
print_pic(key, 0xff1ff61c, "IRLVL3 ");
print_pic(key, 0xff1ff620, "IRLVL4 ");
print_pic(key, 0xff1ff624, "IRLVL5 ");
print_pic(key, 0xff1ff628, "IRLVL6 ");
print_pic(key, 0xff1ff62c, "IRLVL7 ");
print_pic(key, 0xff1ff640, "IRMSK ");
print_pic(key, 0xff1ff660, "IREDC ");
print_pic(key, 0xff1ff680, "IRPND ");
print_pic(key, 0xff1ff6a0, "IRCS ");
print_pic(key, 0xff1ff514, "IRFLAG1 "); /* don't read IRLAG0 -- it hangs system */
print_pic(key, 0xff1ff518, "IRPOL ");
print_pic(key, 0xff1ff51c, "IRRCNT ");
print_pic(key, 0xff1ff520, "IRMASKINT");
print_pic(key, 0xff1ff524, "IRMASKEXT");
return;
}
void print_addr(char *hdr, char *key, unsigned long addr)
{
printk(KERN_INFO "%s %s:0x%08lx=0x%08x\n", hdr, key, addr,
__raw_readl((void __iomem *)addr));
return;
}
void dump_180(char *key)
{
u32 i;
for (i = 0x80000180; i < 0x80000180 + 0x80; i += 4) {
print_addr("180", key, i);
}
return;
}
void dump_eh0(char *key)
{
int i;
extern unsigned long exception_handlers[];
for (i = (int) exception_handlers;
i < (int) (exception_handlers + 20); i += 4) {
print_addr("eh0", key, i);
}
return;
}
void pk0(void)
{
volatile u32 val;
__asm__ __volatile__("ori %0, $26, 0":"=r"(val)
);
printk("k0=[0x%08x]\n", val);
}
#endif

View File

@ -45,27 +45,18 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/txx9tmr.h>
#include <linux/bootmem.h>
#include <linux/blkdev.h>
#ifdef CONFIG_TOSHIBA_FPCIB0
#include <asm/tx4927/smsc_fdc37m81x.h>
#endif
@ -73,42 +64,26 @@
#ifdef CONFIG_PCI
#include <asm/tx4927/tx4927_pci.h>
#endif
#ifdef CONFIG_BLK_DEV_IDEPCI
#include <linux/hdreg.h>
#include <linux/ide.h>
#endif
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#endif
#undef TOSHIBA_RBTX4927_SETUP_DEBUG
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
#define TOSHIBA_RBTX4927_SETUP_NONE 0x00000000
#define TOSHIBA_RBTX4927_SETUP_INFO ( 1 << 0 )
#define TOSHIBA_RBTX4927_SETUP_WARN ( 1 << 1 )
#define TOSHIBA_RBTX4927_SETUP_EROR ( 1 << 2 )
#define TOSHIBA_RBTX4927_SETUP_EFWFU ( 1 << 3 )
#define TOSHIBA_RBTX4927_SETUP_SETUP ( 1 << 4 )
#define TOSHIBA_RBTX4927_SETUP_PCIBIOS ( 1 << 7 )
#define TOSHIBA_RBTX4927_SETUP_PCI1 ( 1 << 8 )
#define TOSHIBA_RBTX4927_SETUP_PCI2 ( 1 << 9 )
#define TOSHIBA_RBTX4927_SETUP_PCI66 ( 1 << 10 )
#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff
#endif
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
static const u32 toshiba_rbtx4927_setup_debug_flag =
(TOSHIBA_RBTX4927_SETUP_NONE | TOSHIBA_RBTX4927_SETUP_INFO |
TOSHIBA_RBTX4927_SETUP_WARN | TOSHIBA_RBTX4927_SETUP_EROR |
TOSHIBA_RBTX4927_SETUP_EFWFU | TOSHIBA_RBTX4927_SETUP_SETUP |
(TOSHIBA_RBTX4927_SETUP_SETUP |
| TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 |
TOSHIBA_RBTX4927_SETUP_PCI2 | TOSHIBA_RBTX4927_SETUP_PCI66);
TOSHIBA_RBTX4927_SETUP_PCI2);
#endif
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
@ -718,7 +693,7 @@ void toshiba_rbtx4927_power_off(void)
/* no return */
}
void __init toshiba_rbtx4927_setup(void)
void __init plat_mem_setup(void)
{
int i;
u32 cp0_config;
@ -741,13 +716,6 @@ void __init toshiba_rbtx4927_setup(void)
cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
write_c0_config(cp0_config);
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
{
extern void dump_cp0(char *);
dump_cp0("toshiba_rbtx4927_early_fw_fixup");
}
#endif
set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
":mips_io_port_base=0x%08lx\n",
@ -936,8 +904,7 @@ void __init toshiba_rbtx4927_setup(void)
"+\n");
}
void __init
toshiba_rbtx4927_time_init(void)
void __init plat_time_init(void)
{
mips_hpt_frequency = tx4927_cpu_clock / 2;
if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS)

View File

@ -6,7 +6,7 @@
# unless it's something special (ie not a .c file).
#
obj-y += prom.o setup.o irq.o
obj-y += prom.o irq.o
obj-$(CONFIG_KGDB) += dbgio.o
EXTRA_CFLAGS += -Werror

View File

@ -1,45 +0,0 @@
/*
* linux/arch/mips/tx4938/common/setup.c
*
* common tx4938 setup routines
*
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/tx4938/rbtx4938.h>
extern void toshiba_rbtx4938_setup(void);
void __init tx4938_setup(void);
void dump_cp0(char *key);
void __init
plat_mem_setup(void)
{
toshiba_rbtx4938_setup();
}

View File

@ -24,16 +24,12 @@
#include <asm/wbflush.h>
#include <asm/reboot.h>
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/txx9tmr.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/bootinfo.h>
#include <asm/tx4938/rbtx4938.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#endif
#include <linux/spi/spi.h>
@ -855,7 +851,7 @@ void __init plat_time_init(void)
txx9_gbus_clock / 2);
}
void __init toshiba_rbtx4938_setup(void)
void __init plat_mem_setup(void)
{
unsigned long long pcfg;
char *argptr;