drm/komeda: Fixed warning: Function parameter or member not described

Fixed the warnings: Function parameter or member 'xxx' not described
when make htmldocs

This patch depends on:
- https://patchwork.freedesktop.org/series/54448/
- https://patchwork.freedesktop.org/series/54449/
- https://patchwork.freedesktop.org/series/54450/

v2: Rebase and add reporter

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drivers/gpu/drm/arm/display/komeda/komeda_crtc.c

@@ -18,9 +18,17 @@
 #include "komeda_dev.h"
 #include "komeda_kms.h"
 
-/* crtc_atomic_check is the final check stage, so beside build a display data
- * pipeline according the crtc_state, but still needs to release/disable the
- * unclaimed pipeline resources.
+/**
+ * komeda_crtc_atomic_check - build display output data flow
+ * @crtc: DRM crtc
+ * @state: the crtc state object
+ *
+ * crtc_atomic_check is the final check stage, so beside build a display data
+ * pipeline according to the crtc_state, but still needs to release or disable
+ * the unclaimed pipeline resources.
+ *
+ * RETURNS:
+ * Zero for success or -errno
  */
 static int
 komeda_crtc_atomic_check(struct drm_crtc *crtc,

drivers/gpu/drm/arm/display/komeda/komeda_dev.h

@@ -120,7 +120,7 @@ struct komeda_dev_funcs {
 		      int master_pipe, u32 active_pipes);
 };
 
-/**
+/*
  * DISPLAY_MODE describes how many display been enabled, and which will be
  * passed to CHIP by &komeda_dev_funcs->change_opmode(), then CHIP can do the
  * pipeline resources assignment according to this usage hint.
@@ -145,24 +145,31 @@ enum {
  * control-abilites of device.
  */
 struct komeda_dev {
+	/** @dev: the base device structure */
 	struct device *dev;
+	/** @reg_base: the base address of komeda io space */
 	u32 __iomem   *reg_base;
 
+	/** @chip: the basic chip information */
 	struct komeda_chip_info chip;
 	/** @fmt_tbl: initialized by &komeda_dev_funcs->init_format_table */
 	struct komeda_format_caps_table fmt_tbl;
 	/** @pclk: APB clock for register access */
 	struct clk *pclk;
-	/** @mck: HW main engine clk */
+	/** @mclk: HW main engine clk */
 	struct clk *mclk;
 
 	/** @irq: irq number */
 	int irq;
 
-	struct mutex lock; /* used to protect dpmode */
-	u32 dpmode; /* current display mode */
+	/** @lock: used to protect dpmode */
+	struct mutex lock;
+	/** @dpmode: current display mode */
+	u32 dpmode;
 
+	/** @n_pipelines: the number of pipe in @pipelines */
 	int n_pipelines;
+	/** @pipelines: the komeda pipelines */
 	struct komeda_pipeline *pipelines[KOMEDA_MAX_PIPELINES];
 
 	/** @funcs: chip funcs to access to HW */
@@ -175,6 +182,7 @@ struct komeda_dev {
 	 */
 	void *chip_data;
 
+	/** @debugfs_root: root directory of komeda debugfs */
 	struct dentry *debugfs_root;
 };
 

drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h

@@ -10,11 +10,16 @@
 #include <drm/drm_framebuffer.h>
 #include "komeda_format_caps.h"
 
-/** struct komeda_fb - entend drm_framebuffer with komeda attribute */
+/**
+ * struct komeda_fb - Entending drm_framebuffer with komeda attribute
+ */
 struct komeda_fb {
 	/** @base: &drm_framebuffer */
 	struct drm_framebuffer base;
-	/* @format_caps: &komeda_format_caps */
+	/**
+	 * @format_caps:
+	 * extends drm_format_info for komeda specific information
+	 */
 	const struct komeda_format_caps *format_caps;
 	/** @aligned_w: aligned frame buffer width */
 	u32 aligned_w;

drivers/gpu/drm/arm/display/komeda/komeda_kms.h

@@ -15,7 +15,9 @@
 #include <video/videomode.h>
 #include <video/display_timing.h>
 
-/** struct komeda_plane - komeda instance of drm_plane */
+/**
+ * struct komeda_plane - komeda instance of drm_plane
+ */
 struct komeda_plane {
 	/** @base: &drm_plane */
 	struct drm_plane base;
@@ -71,11 +73,13 @@ struct komeda_crtc {
 	 */
 	struct komeda_pipeline *slave;
 
-	/* this flip_done is for tracing the disable */
+	/** @disable_done: this flip_done is for tracing the disable */
 	struct completion *disable_done;
 };
 
-/** struct komeda_crtc_state */
+/**
+ * struct komeda_crtc_state
+ */
 struct komeda_crtc_state {
 	/** @base: &drm_crtc_state */
 	struct drm_crtc_state base;
@@ -83,7 +87,15 @@ struct komeda_crtc_state {
 	/* private properties */
 
 	/* computed state which are used by validate/check */
+	/**
+	 * @affected_pipes:
+	 * the affected pipelines in once display instance
+	 */
 	u32 affected_pipes;
+	/**
+	 * @active_pipes:
+	 * the active pipelines in once display instance
+	 */
 	u32 active_pipes;
 };
 

drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h

@@ -90,32 +90,35 @@ struct komeda_component {
 	u32 __iomem *reg;
 	/** @id: component id */
 	u32 id;
-	/** @hw_ic: component hw id,
-	 *  which is initialized by chip and used by chip only
+	/**
+	 * @hw_id: component hw id,
+	 * which is initialized by chip and used by chip only
 	 */
 	u32 hw_id;
 
 	/**
 	 * @max_active_inputs:
-	 * @max_active_outpus:
+	 * @max_active_outputs:
 	 *
-	 * maximum number of inputs/outputs that can be active in the same time
+	 * maximum number of inputs/outputs that can be active at the same time
 	 * Note:
 	 * the number isn't the bit number of @supported_inputs or
 	 * @supported_outputs, but may be less than it, since component may not
 	 * support enabling all @supported_inputs/outputs at the same time.
 	 */
 	u8 max_active_inputs;
+	/** @max_active_outputs: maximum number of outputs */
 	u8 max_active_outputs;
 	/**
 	 * @supported_inputs:
 	 * @supported_outputs:
 	 *
-	 * bitmask of BIT(component->id) for the supported inputs/outputs
+	 * bitmask of BIT(component->id) for the supported inputs/outputs,
 	 * describes the possibilities of how a component is linked into a
 	 * pipeline.
 	 */
 	u32 supported_inputs;
+	/** @supported_outputs: bitmask of supported output componenet ids */
 	u32 supported_outputs;
 
 	/**
@@ -134,7 +137,8 @@ struct komeda_component {
 struct komeda_component_output {
 	/** @component: indicate which component the data comes from */
 	struct komeda_component *component;
-	/** @output_port:
+	/**
+	 * @output_port:
 	 * the output port of the &komeda_component_output.component
 	 */
 	u8 output_port;
@@ -150,11 +154,12 @@ struct komeda_component_output {
 struct komeda_component_state {
 	/** @obj: tracking component_state by drm_atomic_state */
 	struct drm_private_state obj;
+	/** @component: backpointer to the component */
 	struct komeda_component *component;
 	/**
 	 * @binding_user:
-	 * currently bound user, the user can be crtc/plane/wb_conn, which is
-	 * valid decided by @component and @inputs
+	 * currently bound user, the user can be @crtc, @plane or @wb_conn,
+	 * which is valid decided by @component and @inputs
 	 *
 	 * -  Layer: its user always is plane.
 	 * -  compiz/improc/timing_ctrlr: the user is crtc.
@@ -162,20 +167,24 @@ struct komeda_component_state {
 	 * -  scaler: plane when input is layer, wb_conn if input is compiz.
 	 */
 	union {
+		/** @crtc: backpointer for user crtc */
 		struct drm_crtc *crtc;
+		/** @plane: backpointer for user plane */
 		struct drm_plane *plane;
+		/** @wb_conn: backpointer for user wb_connector  */
 		struct drm_connector *wb_conn;
 		void *binding_user;
 	};
+
 	/**
 	 * @active_inputs:
 	 *
 	 * active_inputs is bitmask of @inputs index
 	 *
-	 * -  active_inputs = changed_active_inputs + unchanged_active_inputs
-	 * -  affected_inputs = old->active_inputs + new->active_inputs;
+	 * -  active_inputs = changed_active_inputs | unchanged_active_inputs
+	 * -  affected_inputs = old->active_inputs | new->active_inputs;
 	 * -  disabling_inputs = affected_inputs ^ active_inputs;
-	 * -  changed_inputs = disabling_inputs + changed_active_inputs;
+	 * -  changed_inputs = disabling_inputs | changed_active_inputs;
 	 *
 	 * NOTE:
 	 * changed_inputs doesn't include all active_input but only
@@ -183,7 +192,9 @@ struct komeda_component_state {
 	 * level for dirty update.
 	 */
 	u16 active_inputs;
+	/** @changed_active_inputs: bitmask of the changed @active_inputs */
 	u16 changed_active_inputs;
+	/** @affected_inputs: bitmask for affected @inputs */
 	u16 affected_inputs;
 	/**
 	 * @inputs:
@@ -319,14 +330,23 @@ struct komeda_pipeline {
 	int id;
 	/** @avail_comps: available components mask of pipeline */
 	u32 avail_comps;
+	/** @n_layers: the number of layer on @layers */
 	int n_layers;
+	/** @layers: the pipeline layers */
 	struct komeda_layer *layers[KOMEDA_PIPELINE_MAX_LAYERS];
+	/** @n_scalers: the number of scaler on @scalers */
 	int n_scalers;
+	/** @scalers: the pipeline scalers */
 	struct komeda_scaler *scalers[KOMEDA_PIPELINE_MAX_SCALERS];
+	/** @compiz: compositor */
 	struct komeda_compiz *compiz;
+	/** @wb_layer: writeback layer */
 	struct komeda_layer  *wb_layer;
+	/** @improc: post image processor */
 	struct komeda_improc *improc;
+	/** @ctrlr: timing controller */
 	struct komeda_timing_ctrlr *ctrlr;
+	/** @funcs: chip pipeline functions */
 	struct komeda_pipeline_funcs *funcs; /* private pipeline functions */
 
 	/** @of_node: pipeline dt node */
@@ -347,6 +367,7 @@ struct komeda_pipeline {
 struct komeda_pipeline_state {
 	/** @obj: tracking pipeline_state by drm_atomic_state */
 	struct drm_private_state obj;
+	/** @pipe: backpointer to the pipeline */
 	struct komeda_pipeline *pipe;
 	/** @crtc: currently bound crtc */
 	struct drm_crtc *crtc;

drivers/gpu/drm/arm/display/komeda/komeda_plane.c

@@ -39,6 +39,14 @@ komeda_plane_init_data_flow(struct drm_plane_state *st,
 	return 0;
 }
 
+/**
+ * komeda_plane_atomic_check - build input data flow
+ * @plane: DRM plane
+ * @state: the plane state object
+ *
+ * RETURNS:
+ * Zero for success or -errno
+ */
 int komeda_plane_atomic_check(struct drm_plane *plane,
 			      struct drm_plane_state *state)
 {