diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 32d302ed2ed0..37d45c4f88fb 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -6,6 +7,71 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
+				      &pmx_fan_low &pmx_fan_high
+				      &pmx_led_function_red &pmx_led_alarm
+				      &pmx_led_info &pmx_led_power
+				      &pmx_fan_lock &pmx_button_function
+				      &pmx_power_switch &pmx_power_auto_switch
+				      &pmx_led_function_blue >;
+			pinctrl-names = "default";
+
+			pmx_power_hdd: pmx-power-hdd {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp11";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp19";
+				marvell,function = "gpo";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function_red {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index f780e2e0c5dc..d60cdab46f4b 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -20,7 +20,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mv643xx_eth.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data lsxl_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
@@ -30,23 +29,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int lsxl_mpp_config[] __initdata = {
-	MPP10_GPO,	/* HDD Power Enable */
-	MPP11_GPIO,	/* USB Vbus Enable */
-	MPP18_GPO,	/* FAN High Enable# */
-	MPP19_GPO,	/* FAN Low Enable# */
-	MPP36_GPIO,	/* Function Blue LED */
-	MPP37_GPIO,	/* Alarm LED */
-	MPP38_GPIO,	/* Info LED */
-	MPP39_GPIO,	/* Power LED */
-	MPP40_GPIO,	/* Fan Lock */
-	MPP41_GPIO,	/* Function Button */
-	MPP42_GPIO,	/* Power Switch */
-	MPP43_GPIO,	/* Power Auto Switch */
-	MPP48_GPIO,	/* Function Red LED */
-	0
-};
-
 /*
  * On the LS-XHL/LS-CHLv2, the shutdown process is following:
  * - Userland monitors key events until the power switch goes to off position
@@ -65,7 +47,6 @@ void __init lsxl_init(void)
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(lsxl_mpp_config);
 
 	kirkwood_ge00_init(&lsxl_ge00_data);
 	kirkwood_ge01_init(&lsxl_ge01_data);