add snmp counters document

Add explainations for some general IP counters, SACK and DSACK related
counters

Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
yupeng 2018-12-12 00:14:10 -08:00 committed by David S. Miller
parent 384aee46ca
commit 8e2ea53a83
1 changed files with 244 additions and 1 deletions

View File

@ -17,7 +17,9 @@ Defined in `RFC1213 ipInReceives`_
The number of packets received by the IP layer. It gets increasing at the
beginning of ip_rcv function, always be updated together with
IpExtInOctets. It indicates the number of aggregated segments after
IpExtInOctets. It will be increased even if the packet is dropped
later (e.g. due to the IP header is invalid or the checksum is wrong
and so on). It indicates the number of aggregated segments after
GRO/LRO.
* IpInDelivers
@ -57,6 +59,58 @@ status. They count the real frame number regardless the LRO/GRO. So
for the same packet, you might find that IpInReceives count 1, but
IpExtInNoECTPkts counts 2 or more.
* IpInHdrErrors
Defined in `RFC1213 ipInHdrErrors`_. It indicates the packet is
dropped due to the IP header error. It might happen in both IP input
and IP forward paths.
.. _RFC1213 ipInHdrErrors: https://tools.ietf.org/html/rfc1213#page-27
* IpInAddrErrors
Defined in `RFC1213 ipInAddrErrors`_. It will be increased in two
scenarios: (1) The IP address is invalid. (2) The destination IP
address is not a local address and IP forwarding is not enabled
.. _RFC1213 ipInAddrErrors: https://tools.ietf.org/html/rfc1213#page-27
* IpExtInNoRoutes
This counter means the packet is dropped when the IP stack receives a
packet and can't find a route for it from the route table. It might
happen when IP forwarding is enabled and the destination IP address is
not a local address and there is no route for the destination IP
address.
* IpInUnknownProtos
Defined in `RFC1213 ipInUnknownProtos`_. It will be increased if the
layer 4 protocol is unsupported by kernel. If an application is using
raw socket, kernel will always deliver the packet to the raw socket
and this counter won't be increased.
.. _RFC1213 ipInUnknownProtos: https://tools.ietf.org/html/rfc1213#page-27
* IpExtInTruncatedPkts
For IPv4 packet, it means the actual data size is smaller than the
"Total Length" field in the IPv4 header.
* IpInDiscards
Defined in `RFC1213 ipInDiscards`_. It indicates the packet is dropped
in the IP receiving path and due to kernel internal reasons (e.g. no
enough memory).
.. _RFC1213 ipInDiscards: https://tools.ietf.org/html/rfc1213#page-28
* IpOutDiscards
Defined in `RFC1213 ipOutDiscards`_. It indicates the packet is
dropped in the IP sending path and due to kernel internal reasons.
.. _RFC1213 ipOutDiscards: https://tools.ietf.org/html/rfc1213#page-28
* IpOutNoRoutes
Defined in `RFC1213 ipOutNoRoutes`_. It indicates the packet is
dropped in the IP sending path and no route is found for it.
.. _RFC1213 ipOutNoRoutes: https://tools.ietf.org/html/rfc1213#page-29
ICMP counters
============
* IcmpInMsgs and IcmpOutMsgs
@ -425,6 +479,100 @@ The sum of CWND detected by packet delay. Dividing this value by
TcpExtTCPHystartDelayDetect is the average CWND which detected by the
packet delay.
TCP retransmission and congestion control
======================================
The TCP protocol has two retransmission mechanisms: SACK and fast
recovery. They are exclusive with each other. When SACK is enabled,
the kernel TCP stack would use SACK, or kernel would use fast
recovery. The SACK is a TCP option, which is defined in `RFC2018`_,
the fast recovery is defined in `RFC6582`_, which is also called
'Reno'.
The TCP congestion control is a big and complex topic. To understand
the related snmp counter, we need to know the states of the congestion
control state machine. There are 5 states: Open, Disorder, CWR,
Recovery and Loss. For details about these states, please refer page 5
and page 6 of this document:
https://pdfs.semanticscholar.org/0e9c/968d09ab2e53e24c4dca5b2d67c7f7140f8e.pdf
.. _RFC2018: https://tools.ietf.org/html/rfc2018
.. _RFC6582: https://tools.ietf.org/html/rfc6582
* TcpExtTCPRenoRecovery and TcpExtTCPSackRecovery
When the congestion control comes into Recovery state, if sack is
used, TcpExtTCPSackRecovery increases 1, if sack is not used,
TcpExtTCPRenoRecovery increases 1. These two counters mean the TCP
stack begins to retransmit the lost packets.
* TcpExtTCPSACKReneging
A packet was acknowledged by SACK, but the receiver has dropped this
packet, so the sender needs to retransmit this packet. In this
situation, the sender adds 1 to TcpExtTCPSACKReneging. A receiver
could drop a packet which has been acknowledged by SACK, although it is
unusual, it is allowed by the TCP protocol. The sender doesn't really
know what happened on the receiver side. The sender just waits until
the RTO expires for this packet, then the sender assumes this packet
has been dropped by the receiver.
* TcpExtTCPRenoReorder
The reorder packet is detected by fast recovery. It would only be used
if SACK is disabled. The fast recovery algorithm detects recorder by
the duplicate ACK number. E.g., if retransmission is triggered, and
the original retransmitted packet is not lost, it is just out of
order, the receiver would acknowledge multiple times, one for the
retransmitted packet, another for the arriving of the original out of
order packet. Thus the sender would find more ACks than its
expectation, and the sender knows out of order occurs.
* TcpExtTCPTSReorder
The reorder packet is detected when a hole is filled. E.g., assume the
sender sends packet 1,2,3,4,5, and the receiving order is
1,2,4,5,3. When the sender receives the ACK of packet 3 (which will
fill the hole), two conditions will let TcpExtTCPTSReorder increase
1: (1) if the packet 3 is not re-retransmitted yet. (2) if the packet
3 is retransmitted but the timestamp of the packet 3's ACK is earlier
than the retransmission timestamp.
* TcpExtTCPSACKReorder
The reorder packet detected by SACK. The SACK has two methods to
detect reorder: (1) DSACK is received by the sender. It means the
sender sends the same packet more than one times. And the only reason
is the sender believes an out of order packet is lost so it sends the
packet again. (2) Assume packet 1,2,3,4,5 are sent by the sender, and
the sender has received SACKs for packet 2 and 5, now the sender
receives SACK for packet 4 and the sender doesn't retransmit the
packet yet, the sender would know packet 4 is out of order. The TCP
stack of kernel will increase TcpExtTCPSACKReorder for both of the
above scenarios.
DSACK
=====
The DSACK is defined in `RFC2883`_. The receiver uses DSACK to report
duplicate packets to the sender. There are two kinds of
duplications: (1) a packet which has been acknowledged is
duplicate. (2) an out of order packet is duplicate. The TCP stack
counts these two kinds of duplications on both receiver side and
sender side.
.. _RFC2883 : https://tools.ietf.org/html/rfc2883
* TcpExtTCPDSACKOldSent
The TCP stack receives a duplicate packet which has been acked, so it
sends a DSACK to the sender.
* TcpExtTCPDSACKOfoSent
The TCP stack receives an out of order duplicate packet, so it sends a
DSACK to the sender.
* TcpExtTCPDSACKRecv
The TCP stack receives a DSACK, which indicate an acknowledged
duplicate packet is received.
* TcpExtTCPDSACKOfoRecv
The TCP stack receives a DSACK, which indicate an out of order
duplciate packet is received.
examples
=======
@ -945,3 +1093,98 @@ Both TcpExtListenOverflows and TcpExtListenDrops were 4. If the time
between the 4th nc and the nstat was longer, the value of
TcpExtListenOverflows and TcpExtListenDrops would be larger, because
the SYN of the 4th nc was dropped, the client was retrying.
IpInAddrErrors, IpExtInNoRoutes and IpOutNoRoutes
----------------------------------------------
server A IP address: 192.168.122.250
server B IP address: 192.168.122.251
Prepare on server A, add a route to server B::
$ sudo ip route add 8.8.8.8/32 via 192.168.122.251
Prepare on server B, disable send_redirects for all interfaces::
$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
$ sudo sysctl -w net.ipv4.conf.ens3.send_redirects=0
$ sudo sysctl -w net.ipv4.conf.lo.send_redirects=0
$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
We want to let sever A send a packet to 8.8.8.8, and route the packet
to server B. When server B receives such packet, it might send a ICMP
Redirect message to server A, set send_redirects to 0 will disable
this behavior.
First, generate InAddrErrors. On server B, we disable IP forwarding::
$ sudo sysctl -w net.ipv4.conf.all.forwarding=0
On server A, we send packets to 8.8.8.8::
$ nc -v 8.8.8.8 53
On server B, we check the output of nstat::
$ nstat
#kernel
IpInReceives 3 0.0
IpInAddrErrors 3 0.0
IpExtInOctets 180 0.0
IpExtInNoECTPkts 3 0.0
As we have let server A route 8.8.8.8 to server B, and we disabled IP
forwarding on server B, Server A sent packets to server B, then server B
dropped packets and increased IpInAddrErrors. As the nc command would
re-send the SYN packet if it didn't receive a SYN+ACK, we could find
multiple IpInAddrErrors.
Second, generate IpExtInNoRoutes. On server B, we enable IP
forwarding::
$ sudo sysctl -w net.ipv4.conf.all.forwarding=1
Check the route table of server B and remove the default route::
$ ip route show
default via 192.168.122.1 dev ens3 proto static
192.168.122.0/24 dev ens3 proto kernel scope link src 192.168.122.251
$ sudo ip route delete default via 192.168.122.1 dev ens3 proto static
On server A, we contact 8.8.8.8 again::
$ nc -v 8.8.8.8 53
nc: connect to 8.8.8.8 port 53 (tcp) failed: Network is unreachable
On server B, run nstat::
$ nstat
#kernel
IpInReceives 1 0.0
IpOutRequests 1 0.0
IcmpOutMsgs 1 0.0
IcmpOutDestUnreachs 1 0.0
IcmpMsgOutType3 1 0.0
IpExtInNoRoutes 1 0.0
IpExtInOctets 60 0.0
IpExtOutOctets 88 0.0
IpExtInNoECTPkts 1 0.0
We enabled IP forwarding on server B, when server B received a packet
which destination IP address is 8.8.8.8, server B will try to forward
this packet. We have deleted the default route, there was no route for
8.8.8.8, so server B increase IpExtInNoRoutes and sent the "ICMP
Destination Unreachable" message to server A.
Third, generate IpOutNoRoutes. Run ping command on server B::
$ ping -c 1 8.8.8.8
connect: Network is unreachable
Run nstat on server B::
$ nstat
#kernel
IpOutNoRoutes 1 0.0
We have deleted the default route on server B. Server B couldn't find
a route for the 8.8.8.8 IP address, so server B increased
IpOutNoRoutes.