OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ARM: soc: driver specific changes 

- A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO48AAoJEIwa5zzehBx3excP/ieEkRhvfnWxdYST6ekvGIQr
 nEyskOh2rVjgYKmSXUJyKSbvG+7bZ8VIxvPvojeAJ/R84pTFMzbR2F0CaPKzAuSW
 inDt6c0Bnx1NZlfUTAoXcz7feyq9zHYNs9BCLoPU0bYNchCCqcWSKzqnpXk2ph/P
 LFnmNa0j6a4E3QJYAjM2zFvc3Tgk+MWTq1fWwNFvsWTh2WbQtmB/iGnzT5Xs4XQh
 u1SSx5tz0lcF5zQRGmJhXgL5+nnIP4sRwRUBAkpe3Gv5cM6WBVEBRDANa5QpbUL2
 RXK5YyCTIln2Me4bPk32zEBLjiZ/WXbmiA2uwoqVgy6XToubemDXd0PtKmjj5tZ1
 BkTD1DND7BKBEQnJj/GBECEdvx2FbrKfruoPcJHvXPZ7Svn5Dt/MWYJQIkRFkuhL
 zlVNoDGWlU8nScGrgmTM56UvWmGWC3UFsWSgdVQNfW9yEva+G1FvRUwUH02Ip5Ad
 4r28JFIn6zyjtM99ZHipU6C6Rze2ordC7fl5X5LBLkVOobioblxCAhIhcqkhfKsk
 rFriNsdfYs7SrJA7mK7GzvaMEJgp/5o1noJKXI7ZBcLI8yYagzbQbPu/vGi6G6d3
 0xC7NaTEJbtoXoDAtmtilLRxmw0YCXgVBBGua0K2YKpcRwnzCHNbV4gsLMnDuOXS
 HP4M96LxLHJlLGCxhEme
 =ck7M
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...
This commit is contained in:
Linus Torvalds 2012-10-01 18:46:13 -07:00
parent 84be4ae2c0 04ef037c92
commit 8f446a7a06
162 changed files with 4914 additions and 3548 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Documentation/devicetree/bindings/bus/omap-ocp2scp.txt Normal file
View File

@ -0,0 +1,10 @@
* OMAP OCP2SCP - ocp interface to scp interface
properties:
- compatible : Should be "ti,omap-ocp2scp"
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- ranges : the child address space are mapped 1:1 onto the parent address space
- ti,hwmods : must be "ocp2scp_usb_phy"
Sub-nodes:
All the devices connected to ocp2scp are described using sub-node to ocp2scp

30
Documentation/devicetree/bindings/media/exynos5-gsc.txt Normal file
View File

@ -0,0 +1,30 @@
* Samsung Exynos5 G-Scaler device
G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
Required properties:
- compatible: should be "samsung,exynos5-gsc"
- reg: should contain G-Scaler physical address location and length.
- interrupts: should contain G-Scaler interrupt number
Example:
gsc_0: gsc@0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
};
Aliases:
Each G-Scaler node should have a numbered alias in the aliases node,
in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
to retrieve the device IDs using "of_alias_get_id()" call.
Example:
aliases {
gsc0 =&gsc_0;
gsc1 =&gsc_1;
gsc2 =&gsc_2;
gsc3 =&gsc_3;
};

196
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt Normal file
View File

@ -0,0 +1,196 @@
Samsung GPIO and Pin Mux/Config controller
Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
controller. It controls the input/output settings on the available pads/pins
and also provides ability to multiplex and configure the output of various
on-chip controllers onto these pads.
Required Properties:
- compatible: should be one of the following.
- "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
- "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
as child nodes of the pin-controller node. There should be atleast one
child node and there is no limit on the count of these child nodes.
The child node should contain a list of pin(s) on which a particular pin
function selection or pin configuration (or both) have to applied. This
list of pins is specified using the property name "samsung,pins". There
should be atleast one pin specfied for this property and there is no upper
limit on the count of pins that can be specified. The pins are specified
using pin names which are derived from the hardware manual of the SoC. As
an example, the pins in GPA0 bank of the pin controller can be represented
as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
The format of the pin names should be (as per the hardware manual)
"[pin bank name]-[pin number within the bank]".
The pin function selection that should be applied on the pins listed in the
child node is specified using the "samsung,pin-function" property. The value
of this property that should be applied to each of the pins listed in the
"samsung,pins" property should be picked from the hardware manual of the SoC
for the specified pin group. This property is optional in the child node if
no specific function selection is desired for the pins listed in the child
node. The value of this property is used as-is to program the pin-controller
function selector register of the pin-bank.
The child node can also optionally specify one or more of the pin
configuration that should be applied on all the pins listed in the
"samsung,pins" property of the child node. The following pin configuration
properties are supported.
- samsung,pin-pud: Pull up/down configuration.
- samsung,pin-drv: Drive strength configuration.
- samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
- samsung,pin-drv-pdn: Drive strength configuration in power down mode.
The values specified by these config properties should be derived from the
hardware manual and these values are programmed as-is into the pin
pull up/down and driver strength register of the pin-controller.
Note: A child should include atleast a pin function selection property or
pin configuration property (one or more) or both.
The client nodes that require a particular pin function selection and/or
pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
file.
External GPIO and Wakeup Interrupts:
The controller supports two types of external interrupts over gpio. The first
is the external gpio interrupt and second is the external wakeup interrupts.
The difference between the two is that the external wakeup interrupts can be
used as system wakeup events.
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
- interrupt-controller: identifies the controller node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2.
- First Cell: represents the external gpio interrupt number local to the
external gpio interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
child node representing the external wakeup interrupt controller should be
included in the pin-controller device node. This child node should include
the following properties.
- compatible: identifies the type of the external wakeup interrupt controller
The possible values are:
- samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
found on Samsung Exynos4210 SoC.
- interrupt-parent: phandle of the interrupt parent to which the external
wakeup interrupts are forwarded to.
- interrupt-controller: identifies the node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2
- First Cell: represents the external wakeup interrupt number local to
the external wakeup interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
Aliases:
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
Example 1: A pin-controller node with pin groups.
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
Example 2: A pin-controller node with external wakeup interrupt controller node.
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
};
};
Example 3: A uart client node that supports 'default' and 'flow-control' states.
uart@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
pinctrl-names = "default", "flow-control;
pinctrl-0 = <&uart0_data>;
pinctrl-1 = <&uart0_data &uart0_fctl>;
};
Example 4: Set up the default pin state for uart controller.
static int s3c24xx_serial_probe(struct platform_device *pdev) {
struct pinctrl *pinctrl;
...
...
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}

53
arch/arm/Kconfig
View File

@ -1768,59 +1768,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_EBSA110 || \
ARCH_EBSA285 || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || ARCH_DAVINCI || \
ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
If you are compiling a kernel for a NetWinder or EBSA-285, you will
be able to select which LEDs are active using the options below. If
you are compiling a kernel for the EBSA-110 or the LART however, the
red LED will simply flash regularly to indicate that the system is
still functional. It is safe to say Y here if you have a CATS
system, but the driver will do nothing.
config LEDS_TIMER
bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
|| MACH_OMAP_PERSEUS2
depends on LEDS
depends on !GENERIC_CLOCKEVENTS
default y if ARCH_EBSA110
help
If you say Y here, one of the system LEDs (the green one on the
NetWinder, the amber one on the EBSA285, or the red one on the LART)
will flash regularly to indicate that the system is still
operational. This is mainly useful to kernel hackers who are
debugging unstable kernels.
The LART uses the same LED for both Timer LED and CPU usage LED
functions. You may choose to use both, but the Timer LED function
will overrule the CPU usage LED.
config LEDS_CPU
bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
!ARCH_OMAP) \
|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
|| MACH_OMAP_PERSEUS2
depends on LEDS
help
If you say Y here, the red LED will be used to give a good real
time indication of CPU usage, by lighting whenever the idle task
is not currently executing.
The LART uses the same LED for both Timer LED and CPU usage LED
functions. You may choose to use both, but the Timer LED function
will overrule the CPU usage LED.
config ALIGNMENT_TRAP
bool
depends on CPU_CP15_MMU

457
arch/arm/boot/dts/exynos4210-pinctrl.dtsi Normal file
View File

@ -0,0 +1,457 @@
/*
* Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
*
* Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2011-2012 Linaro Ltd.
* www.linaro.org
*
* Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
* tree nodes are listed in this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
pinctrl@11400000 {
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <0x2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart2_fctl: uart2-fctl {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart_audio_a: uart-audio-a {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
uart3_data: uart3-data {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart_audio_b: uart-audio-b {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c4_bus: i2c4-bus {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c5_bus: i2c5-bus {
samsung,pins = "gpb-6", "gpb-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
ac97_bus: ac97-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm2_bus: pcm2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c6_bus: i2c6-bus {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
samsung,pin-function = <5>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c7_bus: i2c7-bus {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c1_bus: i2c1-bus {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
pinctrl@11000000 {
sd0_clk: sd0-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_clk: sd4-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd4_cmd: sd4-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd4_cd: sd4-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_bus1: sd4-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_bus4: sd4-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd4_bus8: sd4-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <4>;
samsung,pin-drv = <0>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpk1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpk1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpk1-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpk1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpk2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpk2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpk2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpk2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpk3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpk3-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpk3-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpk3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
eint0: ext-int0 {
samsung,pins = "gpx0-0";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint8: ext-int8 {
samsung,pins = "gpx1-0";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint15: ext-int15 {
samsung,pins = "gpx1-7";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint16: ext-int16 {
samsung,pins = "gpx2-0";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
eint31: ext-int31 {
samsung,pins = "gpx3-7";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
pinctrl@03860000 {
i2s0_bus: i2s0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <0x2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <0x3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
};

37
arch/arm/boot/dts/exynos4210.dtsi
View File

@ -20,6 +20,7 @@
*/
/include/ "skeleton.dtsi"
/include/ "exynos4210-pinctrl.dtsi"
/ {
compatible = "samsung,exynos4210";
@ -29,6 +30,9 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
};
gic:interrupt-controller@10490000 {
@ -50,6 +54,39 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
};
};
pinctrl_2: pinctrl@03860000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x03860000 0x1000>;
};
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;

28
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -27,6 +27,10 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
gsc0 = &gsc_0;
gsc1 = &gsc_1;
gsc2 = &gsc_2;
gsc3 = &gsc_3;
};
gic:interrupt-controller@10481000 {
@ -460,4 +464,28 @@
#gpio-cells = <4>;
};
};
gsc_0: gsc@0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
};
gsc_1: gsc@0x13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
};
gsc_2: gsc@0x13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
};
gsc_3: gsc@0x13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
};
};

8
arch/arm/boot/dts/omap4.dtsi
View File

@ -430,5 +430,13 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
ocp2scp {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "ocp2scp_usb_phy";
};
};
};

1
arch/arm/configs/afeb9260_defconfig
View File

@ -39,7 +39,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y

2
arch/arm/configs/at91rm9200_defconfig
View File

@ -232,7 +232,7 @@ CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_AT91=y
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y

2
arch/arm/configs/at91sam9261_defconfig
View File

@ -128,7 +128,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y

3
arch/arm/configs/at91sam9263_defconfig
View File

@ -61,7 +61,6 @@ CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
@ -138,7 +137,7 @@ CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_SDIO_UART=m
CONFIG_MMC_AT91=m
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_ATMEL_PWM=y

2
arch/arm/configs/at91sam9g20_defconfig
View File

@ -99,7 +99,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y

2
arch/arm/configs/at91sam9rl_defconfig
View File

@ -60,7 +60,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_MMC_ATMELMCI=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y

2
arch/arm/configs/cpu9260_defconfig
View File

@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y

2
arch/arm/configs/cpu9g20_defconfig
View File

@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y

3
arch/arm/configs/qil-a9260_defconfig
View File

@ -50,7 +50,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
@ -87,7 +86,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y

1
arch/arm/configs/stamp9g20_defconfig
View File

@ -100,7 +100,6 @@ CONFIG_USB_ETH=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

1
arch/arm/configs/usb-a9260_defconfig
View File

@ -49,7 +49,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y

50
arch/arm/include/asm/leds.h
View File

@ -1,50 +0,0 @@
/*
* arch/arm/include/asm/leds.h
*
* Copyright (C) 1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Event-driven interface for LEDs on machines
* Added led_start and led_stop- Alex Holden, 28th Dec 1998.
*/
#ifndef ASM_ARM_LEDS_H
#define ASM_ARM_LEDS_H
typedef enum {
led_idle_start,
led_idle_end,
led_timer,
led_start,
led_stop,
led_claim, /* override idle & timer leds */
led_release, /* restore idle & timer leds */
led_start_timer_mode,
led_stop_timer_mode,
led_green_on,
led_green_off,
led_amber_on,
led_amber_off,
led_red_on,
led_red_off,
led_blue_on,
led_blue_off,
/*
* I want this between led_timer and led_start, but
* someone has decided to export this to user space
*/
led_halted
} led_event_t;
/* Use this routine to handle LEDs */
#ifdef CONFIG_LEDS
extern void (*leds_event)(led_event_t);
#else
#define leds_event(e)
#endif
#endif

1
arch/arm/kernel/Makefile
View File

@ -21,7 +21,6 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \
obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ISA_DMA_API) += dma.o

121
arch/arm/kernel/leds.c
View File

@ -1,121 +0,0 @@
/*
* LED support code, ripped out of arch/arm/kernel/time.c
*
* Copyright (C) 1994-2001 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/export.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/string.h>
#include <asm/leds.h>
static void dummy_leds_event(led_event_t evt)
{
}
void (*leds_event)(led_event_t) = dummy_leds_event;
struct leds_evt_name {
const char name[8];
int on;
int off;
};
static const struct leds_evt_name evt_names[] = {
{ "amber", led_amber_on, led_amber_off },
{ "blue", led_blue_on, led_blue_off },
{ "green", led_green_on, led_green_off },
{ "red", led_red_on, led_red_off },
};
static ssize_t leds_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
int ret = -EINVAL, len = strcspn(buf, " ");
if (len > 0 && buf[len] == '\0')
len--;
if (strncmp(buf, "claim", len) == 0) {
leds_event(led_claim);
ret = size;
} else if (strncmp(buf, "release", len) == 0) {
leds_event(led_release);
ret = size;
} else {
int i;
for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
if (strlen(evt_names[i].name) != len ||
strncmp(buf, evt_names[i].name, len) != 0)
continue;
if (strncmp(buf+len, " on", 3) == 0) {
leds_event(evt_names[i].on);
ret = size;
} else if (strncmp(buf+len, " off", 4) == 0) {
leds_event(evt_names[i].off);
ret = size;
}
break;
}
}
return ret;
}
static DEVICE_ATTR(event, 0200, NULL, leds_store);
static struct bus_type leds_subsys = {
.name = "leds",
.dev_name = "leds",
};
static struct device leds_device = {
.id = 0,
.bus = &leds_subsys,
};
static int leds_suspend(void)
{
leds_event(led_stop);
return 0;
}
static void leds_resume(void)
{
leds_event(led_start);
}
static void leds_shutdown(void)
{
leds_event(led_halted);
}
static struct syscore_ops leds_syscore_ops = {
.shutdown = leds_shutdown,
.suspend = leds_suspend,
.resume = leds_resume,
};
static int __init leds_init(void)
{
int ret;
ret = subsys_system_register(&leds_subsys, NULL);
if (ret == 0)
ret = device_register(&leds_device);
if (ret == 0)
ret = device_create_file(&leds_device, &dev_attr_event);
if (ret == 0)
register_syscore_ops(&leds_syscore_ops);
return ret;
}
device_initcall(leds_init);
EXPORT_SYMBOL(leds_event);

6
arch/arm/kernel/process.c
View File

@ -31,9 +31,9 @@
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
#include <linux/cpuidle.h>
#include <linux/leds.h>
#include <asm/cacheflush.h>
#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/thread_notify.h>
#include <asm/stacktrace.h>
@ -189,7 +189,7 @@ void cpu_idle(void)
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
leds_event(led_idle_start);
ledtrig_cpu(CPU_LED_IDLE_START);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
@ -220,7 +220,7 @@ void cpu_idle(void)
} else
local_irq_enable();
}
leds_event(led_idle_end);
ledtrig_cpu(CPU_LED_IDLE_END);
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();

17
arch/arm/kernel/time.c
View File

@ -25,7 +25,6 @@
#include <linux/timer.h>
#include <linux/irq.h>
#include <asm/leds.h>
#include <asm/thread_info.h>
#include <asm/sched_clock.h>
#include <asm/stacktrace.h>
@ -80,21 +79,6 @@ u32 arch_gettimeoffset(void)
}
#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
#ifdef CONFIG_LEDS_TIMER
static inline void do_leds(void)
{
static unsigned int count = HZ/2;
if (--count == 0) {
count = HZ/2;
leds_event(led_timer);
}
}
#else
#define do_leds()
#endif
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@ -102,7 +86,6 @@ static inline void do_leds(void)
void timer_tick(void)
{
profile_tick(CPU_PROFILING);
do_leds();
xtime_update(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));

90
arch/arm/mach-at91/at91rm9200_devices.c
View File

@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@ -312,7 +312,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91rm9200_mmc_device = {
.name = "at91_mci",
.name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
unsigned int i;
unsigned int slot_count = 0;
if (!data)
return;
/* input/irq */
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
/* CLK */
at91_set_A_periph(AT91_PIN_PA27, 0);
if (!data->slot[i].bus_width)
continue;
if (data->slot_b) {
/* CMD */
at91_set_B_periph(AT91_PIN_PA8, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_B_periph(AT91_PIN_PA9, 1);
if (data->wire4) {
at91_set_B_periph(AT91_PIN_PA10, 1);
at91_set_B_periph(AT91_PIN_PA11, 1);
at91_set_B_periph(AT91_PIN_PA12, 1);
/* input/irq */
if (gpio_is_valid(data->slot[i].detect_pin)) {
at91_set_gpio_input(data->slot[i].detect_pin, 1);
at91_set_deglitch(data->slot[i].detect_pin, 1);
}
} else {
/* CMD */
at91_set_A_periph(AT91_PIN_PA28, 1);
if (gpio_is_valid(data->slot[i].wp_pin))
at91_set_gpio_input(data->slot[i].wp_pin, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA29, 1);
if (data->wire4) {
at91_set_B_periph(AT91_PIN_PB3, 1);
at91_set_B_periph(AT91_PIN_PB4, 1);
at91_set_B_periph(AT91_PIN_PB5, 1);
switch (i) {
case 0: /* slot A */
/* CMD */
at91_set_A_periph(AT91_PIN_PA28, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA29, 1);
if (data->slot[i].bus_width == 4) {
at91_set_B_periph(AT91_PIN_PB3, 1);
at91_set_B_periph(AT91_PIN_PB4, 1);
at91_set_B_periph(AT91_PIN_PB5, 1);
}
slot_count++;
break;
case 1: /* slot B */
/* CMD */
at91_set_B_periph(AT91_PIN_PA8, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_B_periph(AT91_PIN_PA9, 1);
if (data->slot[i].bus_width == 4) {
at91_set_B_periph(AT91_PIN_PA10, 1);
at91_set_B_periph(AT91_PIN_PA11, 1);
at91_set_B_periph(AT91_PIN_PA12, 1);
}
slot_count++;
break;
default:
printk(KERN_ERR
"AT91: SD/MMC slot %d not available\n", i);
break;
}
if (slot_count) {
/* CLK */
at91_set_A_periph(AT91_PIN_PA27, 0);
mmc_data = *data;
platform_device_register(&at91rm9200_mmc_device);
}
}
mmc_data = *data;
platform_device_register(&at91rm9200_mmc_device);
}
#else
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif

84
arch/arm/mach-at91/at91sam9260_devices.c
View File

@ -208,93 +208,11 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
.start = AT91SAM9260_BASE_MCI,
.end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9260_mmc_device = {
.name = "at91_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
.num_resources = ARRAY_SIZE(mmc_resources),
};
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
/* input/irq */
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
at91_set_A_periph(AT91_PIN_PA8, 0);
if (data->slot_b) {
/* CMD */
at91_set_B_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_B_periph(AT91_PIN_PA0, 1);
if (data->wire4) {
at91_set_B_periph(AT91_PIN_PA5, 1);
at91_set_B_periph(AT91_PIN_PA4, 1);
at91_set_B_periph(AT91_PIN_PA3, 1);
}
} else {
/* CMD */
at91_set_A_periph(AT91_PIN_PA7, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA6, 1);
if (data->wire4) {
at91_set_A_periph(AT91_PIN_PA9, 1);
at91_set_A_periph(AT91_PIN_PA10, 1);
at91_set_A_periph(AT91_PIN_PA11, 1);
}
}
mmc_data = *data;
platform_device_register(&at91sam9260_mmc_device);
}
#else
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
/* --------------------------------------------------------------------
* MMC / SD Slot for Atmel MCI Driver
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct mci_platform_data mmc_data;

60
arch/arm/mach-at91/at91sam9261_devices.c
View File

@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@ -155,7 +155,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91sam9261_mmc_device = {
.name = "at91_mci",
.name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
/* input/irq */
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
if (data->slot[0].bus_width) {
/* input/irq */
if (gpio_is_valid(data->slot[0].detect_pin)) {
at91_set_gpio_input(data->slot[0].detect_pin, 1);
at91_set_deglitch(data->slot[0].detect_pin, 1);
}
if (gpio_is_valid(data->slot[0].wp_pin))
at91_set_gpio_input(data->slot[0].wp_pin, 1);
/* CLK */
at91_set_B_periph(AT91_PIN_PA2, 0);
/* CMD */
at91_set_B_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_B_periph(AT91_PIN_PA0, 1);
if (data->slot[0].bus_width == 4) {
at91_set_B_periph(AT91_PIN_PA4, 1);
at91_set_B_periph(AT91_PIN_PA5, 1);
at91_set_B_periph(AT91_PIN_PA6, 1);
}
mmc_data = *data;
platform_device_register(&at91sam9261_mmc_device);
}
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
at91_set_B_periph(AT91_PIN_PA2, 0);
/* CMD */
at91_set_B_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_B_periph(AT91_PIN_PA0, 1);
if (data->wire4) {
at91_set_B_periph(AT91_PIN_PA4, 1);
at91_set_B_periph(AT91_PIN_PA5, 1);
at91_set_B_periph(AT91_PIN_PA6, 1);
}
mmc_data = *data;
platform_device_register(&at91sam9261_mmc_device);
}
#else
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif

4
arch/arm/mach-at91/at91sam9263.c
View File

@ -188,8 +188,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),

163
arch/arm/mach-at91/at91sam9263_devices.c
View File

@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc0_data, mmc1_data;
static struct mci_platform_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
[0] = {
@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = {
};
static struct platform_device at91sam9263_mmc0_device = {
.name = "at91_mci",
.name = "atmel_mci",
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = {
};
static struct platform_device at91sam9263_mmc1_device = {
.name = "at91_mci",
.name = "atmel_mci",
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = {
.num_resources = ARRAY_SIZE(mmc1_resources),
};
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
unsigned int i;
unsigned int slot_count = 0;
if (!data)
return;
/* input/irq */
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
if (mmc_id == 0) { /* MCI0 */
/* CLK */
at91_set_A_periph(AT91_PIN_PA12, 0);
if (!data->slot[i].bus_width)
continue;
if (data->slot_b) {
/* CMD */
at91_set_A_periph(AT91_PIN_PA16, 1);
/* input/irq */
if (gpio_is_valid(data->slot[i].detect_pin)) {
at91_set_gpio_input(data->slot[i].detect_pin,
1);
at91_set_deglitch(data->slot[i].detect_pin,
1);
}
if (gpio_is_valid(data->slot[i].wp_pin))
at91_set_gpio_input(data->slot[i].wp_pin, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA17, 1);
if (data->wire4) {
at91_set_A_periph(AT91_PIN_PA18, 1);
at91_set_A_periph(AT91_PIN_PA19, 1);
at91_set_A_periph(AT91_PIN_PA20, 1);
if (mmc_id == 0) { /* MCI0 */
switch (i) {
case 0: /* slot A */
/* CMD */
at91_set_A_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA0, 1);
if (data->slot[i].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
}
slot_count++;
break;
case 1: /* slot B */
/* CMD */
at91_set_A_periph(AT91_PIN_PA16, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA17, 1);
if (data->slot[i].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA18, 1);
at91_set_A_periph(AT91_PIN_PA19, 1);
at91_set_A_periph(AT91_PIN_PA20, 1);
}
slot_count++;
break;
default:
printk(KERN_ERR
"AT91: SD/MMC slot %d not available\n", i);
break;
}
} else {
/* CMD */
at91_set_A_periph(AT91_PIN_PA1, 1);
if (slot_count) {
/* CLK */
at91_set_A_periph(AT91_PIN_PA12, 0);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA0, 1);
if (data->wire4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
mmc0_data = *data;
platform_device_register(&at91sam9263_mmc0_device);
}
} else if (mmc_id == 1) { /* MCI1 */
switch (i) {
case 0: /* slot A */
/* CMD */
at91_set_A_periph(AT91_PIN_PA7, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA8, 1);
if (data->slot[i].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA9, 1);
at91_set_A_periph(AT91_PIN_PA10, 1);
at91_set_A_periph(AT91_PIN_PA11, 1);
}
slot_count++;
break;
case 1: /* slot B */
/* CMD */
at91_set_A_periph(AT91_PIN_PA21, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA22, 1);
if (data->slot[i].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA23, 1);
at91_set_A_periph(AT91_PIN_PA24, 1);
at91_set_A_periph(AT91_PIN_PA25, 1);
}
slot_count++;
break;
default:
printk(KERN_ERR
"AT91: SD/MMC slot %d not available\n", i);
break;
}
if (slot_count) {
/* CLK */
at91_set_A_periph(AT91_PIN_PA6, 0);
mmc1_data = *data;
platform_device_register(&at91sam9263_mmc1_device);
}
}
mmc0_data = *data;
platform_device_register(&at91sam9263_mmc0_device);
} else { /* MCI1 */
/* CLK */
at91_set_A_periph(AT91_PIN_PA6, 0);
if (data->slot_b) {
/* CMD */
at91_set_A_periph(AT91_PIN_PA21, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA22, 1);
if (data->wire4) {
at91_set_A_periph(AT91_PIN_PA23, 1);
at91_set_A_periph(AT91_PIN_PA24, 1);
at91_set_A_periph(AT91_PIN_PA25, 1);
}
} else {
/* CMD */
at91_set_A_periph(AT91_PIN_PA7, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA8, 1);
if (data->wire4) {
at91_set_A_periph(AT91_PIN_PA9, 1);
at91_set_A_periph(AT91_PIN_PA10, 1);
at91_set_A_periph(AT91_PIN_PA11, 1);
}
}
mmc1_data = *data;
platform_device_register(&at91sam9263_mmc1_device);
}
}
#else
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
/* --------------------------------------------------------------------

60
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@ -179,7 +179,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91sam9rl_mmc_device = {
.name = "at91_mci",
.name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
/* input/irq */
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
if (data->slot[0].bus_width) {
/* input/irq */
if (gpio_is_valid(data->slot[0].detect_pin)) {
at91_set_gpio_input(data->slot[0].detect_pin, 1);
at91_set_deglitch(data->slot[0].detect_pin, 1);
}
if (gpio_is_valid(data->slot[0].wp_pin))
at91_set_gpio_input(data->slot[0].wp_pin, 1);
/* CLK */
at91_set_A_periph(AT91_PIN_PA2, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA0, 1);
if (data->slot[0].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
}
mmc_data = *data;
platform_device_register(&at91sam9rl_mmc_device);
}
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
at91_set_A_periph(AT91_PIN_PA2, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA0, 1);
if (data->wire4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
}
mmc_data = *data;
platform_device_register(&at91sam9rl_mmc_device);
}
#else
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif

14
arch/arm/mach-at91/board-afeb-9260v1.c
View File

@ -133,12 +133,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata afeb9260_mmc_data = {
.det_pin = AT91_PIN_PC9,
.wp_pin = AT91_PIN_PC4,
.slot_b = 1,
.wire4 = 1,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata afeb9260_mci0_data = {
.slot[1] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PC9,
.wp_pin = AT91_PIN_PC4,
},
};
@ -199,7 +199,7 @@ static void __init afeb9260_board_init(void)
at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
/* MMC */
at91_add_device_mmc(0, &afeb9260_mmc_data);
at91_add_device_mci(0, &afeb9260_mci0_data);
/* I2C */
at91_add_device_i2c(afeb9260_i2c_devices,
ARRAY_SIZE(afeb9260_i2c_devices));

14
arch/arm/mach-at91/board-carmeva.c
View File

@ -71,12 +71,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
// .vcc_pin = -EINVAL,
// };
static struct at91_mmc_data __initdata carmeva_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PB10,
.wp_pin = AT91_PIN_PC14,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata carmeva_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PB10,
.wp_pin = AT91_PIN_PC14,
},
};
static struct spi_board_info carmeva_spi_devices[] = {
@ -150,7 +150,7 @@ static void __init carmeva_board_init(void)
/* Compact Flash */
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
at91_add_device_mmc(0, &carmeva_mmc_data);
at91_add_device_mci(0, &carmeva_mci0_data);
/* LEDs */
at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
}

17
arch/arm/mach-at91/board-cpu9krea.c
View File

@ -254,8 +254,7 @@ static struct gpio_led cpu9krea_leds[] = {
static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
{
I2C_BOARD_INFO("rtc-ds1307", 0x68),
.type = "ds1339",
I2C_BOARD_INFO("ds1339", 0x68),
},
};
@ -312,12 +311,12 @@ static void __init cpu9krea_add_device_buttons(void)
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PA29,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata cpu9krea_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PA29,
.wp_pin = -EINVAL,
},
};
static void __init cpu9krea_board_init(void)
@ -359,7 +358,7 @@ static void __init cpu9krea_board_init(void)
/* Ethernet */
at91_add_device_eth(&cpu9krea_macb_data);
/* MMC */
at91_add_device_mmc(0, &cpu9krea_mmc_data);
at91_add_device_mci(0, &cpu9krea_mci0_data);
/* I2C */
at91_add_device_i2c(cpu9krea_i2c_devices,
ARRAY_SIZE(cpu9krea_i2c_devices));

13
arch/arm/mach-at91/board-cpuat91.c
View File

@ -78,11 +78,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
.pullup_pin = AT91_PIN_PC14,
};
static struct at91_mmc_data __initdata cpuat91_mmc_data = {
.det_pin = AT91_PIN_PC2,
.wire4 = 1,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata cpuat91_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PC2,
.wp_pin = -EINVAL,
},
};
static struct physmap_flash_data cpuat91_flash_data = {
@ -168,7 +169,7 @@ static void __init cpuat91_board_init(void)
/* USB Device */
at91_add_device_udc(&cpuat91_udc_data);
/* MMC */
at91_add_device_mmc(0, &cpuat91_mmc_data);
at91_add_device_mci(0, &cpuat91_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Platform devices */

16
arch/arm/mach-at91/board-csb337.c
View File

@ -87,12 +87,12 @@ static struct at91_cf_data __initdata csb337_cf_data = {
.rst_pin = AT91_PIN_PD2,
};
static struct at91_mmc_data __initdata csb337_mmc_data = {
.det_pin = AT91_PIN_PD5,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PD6,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata csb337_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PD5,
.wp_pin = AT91_PIN_PD6,
},
};
static struct spi_board_info csb337_spi_devices[] = {
@ -220,8 +220,6 @@ static struct gpio_led csb_leds[] = {
static void __init csb337_board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Serial */
/* DBGU on ttyS0 */
at91_register_uart(0, 0, 0);
@ -240,7 +238,7 @@ static void __init csb337_board_init(void)
/* SPI */
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
at91_add_device_mmc(0, &csb337_mmc_data);
at91_add_device_mci(0, &csb337_mci0_data);
/* NOR flash */
platform_device_register(&csb_flash);
/* LEDs */

14
arch/arm/mach-at91/board-eb9200.c
View File

@ -70,12 +70,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
.rst_pin = AT91_PIN_PC5,
};
static struct at91_mmc_data __initdata eb9200_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata eb9200_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
@ -113,7 +113,7 @@ static void __init eb9200_board_init(void)
at91_add_device_spi(NULL, 0);
/* MMC */
/* only supports 1 or 4 bit interface, not wired through to SPI */
at91_add_device_mmc(0, &eb9200_mmc_data);
at91_add_device_mci(0, &eb9200_mci0_data);
}
MACHINE_START(ATEB9200, "Embest ATEB9200")

32
arch/arm/mach-at91/board-ecbat91.c
View File

@ -64,12 +64,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = {
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_mmc_data __initdata ecb_at91mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata ecbat91_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
@ -138,11 +138,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
},
};
/*
* LEDs
*/
static struct gpio_led ecb_leds[] = {
{ /* D1 */
.name = "led1",
.gpio = AT91_PIN_PC7,
.active_low = 1,
.default_trigger = "heartbeat",
}
};
static void __init ecb_at91board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -161,10 +170,13 @@ static void __init ecb_at91board_init(void)
at91_add_device_i2c(NULL, 0);
/* MMC */
at91_add_device_mmc(0, &ecb_at91mmc_data);
at91_add_device_mci(0, &ecbat91_mci0_data);
/* SPI */
at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
/* LEDs */
at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
}
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")

36
arch/arm/mach-at91/board-eco920.c
View File

@ -56,12 +56,12 @@ static struct at91_udc_data __initdata eco920_udc_data = {
.pullup_pin = AT91_PIN_PB13,
};
static struct at91_mmc_data __initdata eco920_mmc_data = {
.slot_b = 0,
.wire4 = 0,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata eco920_mci0_data = {
.slot[0] = {
.bus_width = 1,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
static struct physmap_flash_data eco920_flash_data = {
@ -93,10 +93,26 @@ static struct spi_board_info eco920_spi_devices[] = {
},
};
/*
* LEDs
*/
static struct gpio_led eco920_leds[] = {
{ /* D1 */
.name = "led1",
.gpio = AT91_PIN_PB0,
.active_low = 1,
.default_trigger = "heartbeat",
},
{ /* D2 */
.name = "led2",
.gpio = AT91_PIN_PB1,
.active_low = 1,
.default_trigger = "timer",
}
};
static void __init eco920_board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* DBGU on ttyS0. (Rx & Tx only */
at91_register_uart(0, 0, 0);
at91_add_device_serial();
@ -104,7 +120,7 @@ static void __init eco920_board_init(void)
at91_add_device_usbh(&eco920_usbh_data);
at91_add_device_udc(&eco920_udc_data);
at91_add_device_mmc(0, &eco920_mmc_data);
at91_add_device_mci(0, &eco920_mci0_data);
platform_device_register(&eco920_flash);
at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
@ -127,6 +143,8 @@ static void __init eco920_board_init(void)
);
at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
/* LEDs */
at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
}
MACHINE_START(ECO920, "eco920")

14
arch/arm/mach-at91/board-flexibity.c
View File

@ -75,12 +75,12 @@ static struct spi_board_info flexibity_spi_devices[] = {
};
/* MCI (SD/MMC) */
static struct at91_mmc_data __initdata flexibity_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
.wp_pin = AT91_PIN_PC4,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata flexibity_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PC9,
.wp_pin = AT91_PIN_PC4,
},
};
/* LEDs */
@ -152,7 +152,7 @@ static void __init flexibity_board_init(void)
at91_add_device_spi(flexibity_spi_devices,
ARRAY_SIZE(flexibity_spi_devices));
/* MMC */
at91_add_device_mmc(0, &flexibity_mmc_data);
at91_add_device_mci(0, &flexibity_mci0_data);
/* LEDs */
at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
}

16
arch/arm/mach-at91/board-foxg20.c
View File

@ -86,7 +86,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = {
* SPI devices.
*/
static struct spi_board_info foxg20_spi_devices[] = {
#if !defined(CONFIG_MMC_AT91)
#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{
.modalias = "mtd_dataflash",
.chip_select = 1,
@ -109,12 +109,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
static struct at91_mmc_data __initdata foxg20_mmc_data = {
.slot_b = 1,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata foxg20_mci0_data = {
.slot[1] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
@ -247,7 +247,7 @@ static void __init foxg20_board_init(void)
/* Ethernet */
at91_add_device_eth(&foxg20_macb_data);
/* MMC */
at91_add_device_mmc(0, &foxg20_mmc_data);
at91_add_device_mci(0, &foxg20_mci0_data);
/* I2C */
at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
/* LEDs */

17
arch/arm/mach-at91/board-kafa.c
View File

@ -66,11 +66,20 @@ static struct at91_udc_data __initdata kafa_udc_data = {
.pullup_pin = AT91_PIN_PB7,
};
/*
* LEDs
*/
static struct gpio_led kafa_leds[] = {
{ /* D1 */
.name = "led1",
.gpio = AT91_PIN_PB4,
.active_low = 1,
.default_trigger = "heartbeat",
},
};
static void __init kafa_board_init(void)
{
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -88,6 +97,8 @@ static void __init kafa_board_init(void)
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* LEDs */
at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
}
MACHINE_START(KAFA, "Sperry-Sun KAFA")

37
arch/arm/mach-at91/board-kb9202.c
View File

@ -69,12 +69,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
.pullup_pin = AT91_PIN_PB22,
};
static struct at91_mmc_data __initdata kb9202_mmc_data = {
.det_pin = AT91_PIN_PB2,
.slot_b = 0,
.wire4 = 1,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata kb9202_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PB2,
.wp_pin = -EINVAL,
},
};
static struct mtd_partition __initdata kb9202_nand_partition[] = {
@ -96,11 +96,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
.num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
/*
* LEDs
*/
static struct gpio_led kb9202_leds[] = {
{ /* D1 */
.name = "led1",
.gpio = AT91_PIN_PC19,
.active_low = 1,
.default_trigger = "heartbeat",
},
{ /* D2 */
.name = "led2",
.gpio = AT91_PIN_PC18,
.active_low = 1,
.default_trigger = "timer",
}
};
static void __init kb9202_board_init(void)
{
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -121,13 +136,15 @@ static void __init kb9202_board_init(void)
/* USB Device */
at91_add_device_udc(&kb9202_udc_data);
/* MMC */
at91_add_device_mmc(0, &kb9202_mmc_data);
at91_add_device_mci(0, &kb9202_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
/* LEDs */
at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
}
MACHINE_START(KB9200, "KB920x")

13
arch/arm/mach-at91/board-neocore926.c
View File

@ -138,11 +138,12 @@ static struct spi_board_info neocore926_spi_devices[] = {
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata neocore926_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata neocore926_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
},
};
@ -354,7 +355,7 @@ static void __init neocore926_board_init(void)
neocore926_add_device_ts();
/* MMC */
at91_add_device_mmc(1, &neocore926_mmc_data);
at91_add_device_mci(0, &neocore926_mci0_data);
/* Ethernet */
at91_add_device_eth(&neocore926_macb_data);

14
arch/arm/mach-at91/board-picotux200.c
View File

@ -62,12 +62,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata picotux200_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PB27,
.wp_pin = AT91_PIN_PA17,
},
};
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
@ -112,7 +112,7 @@ static void __init picotux200_board_init(void)
at91_add_device_i2c(NULL, 0);
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
at91_add_device_mci(0, &picotux200_mci0_data);
/* NOR Flash */
platform_device_register(&picotux200_flash);
}

14
arch/arm/mach-at91/board-qil-a9260.c
View File

@ -156,12 +156,12 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata ek_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
/*
@ -245,7 +245,7 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
at91_add_device_mci(0, &ek_mci0_data);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */

17
arch/arm/mach-at91/board-rm9200dk.c
View File

@ -77,12 +77,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata dk_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata dk_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
#endif
@ -177,9 +177,6 @@ static struct gpio_led dk_leds[] = {
static void __init dk_board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -208,7 +205,7 @@ static void __init dk_board_init(void)
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &dk_mmc_data);
at91_add_device_mci(0, &dk_mci0_data);
#endif
/* NAND */
at91_add_device_nand(&dk_nand_data);

17
arch/arm/mach-at91/board-rm9200ek.c
View File

@ -70,12 +70,12 @@ static struct at91_udc_data __initdata ek_udc_data = {
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata ek_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata ek_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PB27,
.wp_pin = AT91_PIN_PA17,
}
};
#endif
@ -148,9 +148,6 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -177,7 +174,7 @@ static void __init ek_board_init(void)
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &ek_mmc_data);
at91_add_device_mci(0, &ek_mci0_data);
#endif
/* NOR Flash */
platform_device_register(&ek_flash);

16
arch/arm/mach-at91/board-rsi-ews.c
View File

@ -58,11 +58,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
/*
* SD/MC
*/
static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PB27,
.wp_pin = AT91_PIN_PB29,
static struct mci_platform_data __initdata rsi_ews_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PB27,
.wp_pin = AT91_PIN_PB29,
},
};
/*
@ -185,9 +186,6 @@ static struct platform_device rsiews_nor_flash = {
*/
static void __init rsi_ews_board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
/* This one is for debugging */
@ -215,7 +213,7 @@ static void __init rsi_ews_board_init(void)
at91_add_device_spi(rsi_ews_spi_devices,
ARRAY_SIZE(rsi_ews_spi_devices));
/* MMC */
at91_add_device_mmc(0, &rsi_ews_mmc_data);
at91_add_device_mci(0, &rsi_ews_mci0_data);
/* NOR Flash */
platform_device_register(&rsiews_nor_flash);
/* LEDs */

39
arch/arm/mach-at91/board-sam9-l9260.c
View File

@ -73,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
#if !defined(CONFIG_MMC_AT91)
#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@ -158,19 +158,34 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1,
.wire4 = 1,
.det_pin = AT91_PIN_PC8,
.wp_pin = AT91_PIN_PC4,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata ek_mci0_data = {
.slot[1] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PC8,
.wp_pin = AT91_PIN_PC4,
},
};
/*
* LEDs
*/
static struct gpio_led ek_leds[] = {
{ /* D1 */
.name = "led1",
.gpio = AT91_PIN_PA9,
.active_low = 1,
.default_trigger = "heartbeat",
},
{ /* D2 */
.name = "led2",
.gpio = AT91_PIN_PA6,
.active_low = 1,
.default_trigger = "timer",
}
};
static void __init ek_board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -194,9 +209,11 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")

16
arch/arm/mach-at91/board-sam9260ek.c
View File

@ -108,7 +108,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
#if !defined(CONFIG_MMC_AT91)
#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@ -211,12 +211,12 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata ek_mci0_data = {
.slot[1] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
@ -329,7 +329,7 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SSC (to AT73C213) */

16
arch/arm/mach-at91/board-sam9261ek.c
View File

@ -340,11 +340,12 @@ static struct spi_board_info ek_spi_devices[] = {
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
#endif /* CONFIG_SPI_ATMEL_* */
@ -569,9 +570,6 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -598,7 +596,7 @@ static void __init ek_board_init(void)
at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
#else
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
at91_add_device_mci(0, &mci0_data);
#endif
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);

13
arch/arm/mach-at91/board-sam9263ek.c
View File

@ -141,11 +141,12 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata mci1_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
},
};
@ -420,7 +421,7 @@ static void __init ek_board_init(void)
/* Touchscreen */
ek_add_device_ts();
/* MMC */
at91_add_device_mmc(1, &ek_mmc_data);
at91_add_device_mci(1, &mci1_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */

16
arch/arm/mach-at91/board-sam9g20ek.c
View File

@ -92,7 +92,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@ -199,7 +199,6 @@ static void __init ek_add_device_nand(void)
* MCI (SD/MMC)
* wp_pin and vcc_pin are not connected
*/
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata ek_mmc_data = {
.slot[1] = {
.bus_width = 4,
@ -208,28 +207,15 @@ static struct mci_platform_data __initdata ek_mmc_data = {
},
};
#else
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1, /* Only one slot so use slot B */
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
#endif
static void __init ek_add_device_mmc(void)
{
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
if (ek_have_2mmc()) {
ek_mmc_data.slot[0].bus_width = 4;
ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
ek_mmc_data.slot[0].wp_pin = -1;
}
at91_add_device_mci(0, &ek_mmc_data);
#else
at91_add_device_mmc(0, &ek_mmc_data);
#endif
}
/*

13
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -56,11 +56,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PA15,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PA15,
.wp_pin = -EINVAL,
},
};
@ -303,7 +304,7 @@ static void __init ek_board_init(void)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
at91_add_device_mci(0, &mci0_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */

14
arch/arm/mach-at91/board-stamp9g20.c
View File

@ -83,7 +83,6 @@ static void __init add_device_nand(void)
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata mmc_data = {
.slot[0] = {
.bus_width = 4,
@ -91,15 +90,6 @@ static struct mci_platform_data __initdata mmc_data = {
.wp_pin = -1,
},
};
#else
static struct at91_mmc_data __initdata mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
#endif
/*
@ -223,11 +213,7 @@ void __init stamp9g20_board_init(void)
/* NAND */
add_device_nand();
/* MMC */
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &mmc_data);
#else
at91_add_device_mmc(0, &mmc_data);
#endif
/* W1 */
add_w1();
}

2
arch/arm/mach-at91/board-usb-a926x.c
View File

@ -109,14 +109,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
* SPI devices.
*/
static struct spi_board_info usb_a9263_spi_devices[] = {
#if !defined(CONFIG_MMC_AT91)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
}
#endif
};
static struct spi_board_info usb_a9g20_spi_devices[] = {

16
arch/arm/mach-at91/board-yl-9200.c
View File

@ -119,11 +119,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
/*
* MMC
*/
static struct at91_mmc_data __initdata yl9200_mmc_data = {
.det_pin = AT91_PIN_PB9,
.wire4 = 1,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
static struct mci_platform_data __initdata yl9200_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PB9,
.wp_pin = -EINVAL,
},
};
/*
@ -541,9 +542,6 @@ void __init yl9200_add_device_video(void) {}
static void __init yl9200_board_init(void)
{
/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@ -568,7 +566,7 @@ static void __init yl9200_board_init(void)
/* I2C */
at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
/* MMC */
at91_add_device_mmc(0, &yl9200_mmc_data);
at91_add_device_mci(0, &yl9200_mci0_data);
/* NAND */
at91_add_device_nand(&yl9200_nand_data);
/* NOR Flash */

1
arch/arm/mach-at91/include/mach/board.h
View File

@ -187,7 +187,6 @@ struct at91_can_data {
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);

105
arch/arm/mach-at91/leds.c
View File

@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr)
#else
void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
#endif
/* ------------------------------------------------------------------------- */
#if defined(CONFIG_LEDS)
#include <asm/leds.h>
/*
* Old ARM-specific LED framework; not fully functional when generic time is
* in use.
*/
static u8 at91_leds_cpu;
static u8 at91_leds_timer;
static inline void at91_led_on(unsigned int led)
{
at91_set_gpio_value(led, 0);
}
static inline void at91_led_off(unsigned int led)
{
at91_set_gpio_value(led, 1);
}
static inline void at91_led_toggle(unsigned int led)
{
unsigned long is_off = at91_get_gpio_value(led);
if (is_off)
at91_led_on(led);
else
at91_led_off(led);
}
/*
* Handle LED events.
*/
static void at91_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch(evt) {
case led_start: /* System startup */
at91_led_on(at91_leds_cpu);
break;
case led_stop: /* System stop / suspend */
at91_led_off(at91_leds_cpu);
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer: /* Every 50 timer ticks */
at91_led_toggle(at91_leds_timer);
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start: /* Entering idle state */
at91_led_off(at91_leds_cpu);
break;
case led_idle_end: /* Exit idle state */
at91_led_on(at91_leds_cpu);
break;
#endif
default:
break;
}
local_irq_restore(flags);
}
static int __init leds_init(void)
{
if (!at91_leds_timer || !at91_leds_cpu)
return -ENODEV;
leds_event = at91_leds_event;
leds_event(led_start);
return 0;
}
__initcall(leds_init);
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
/* Enable GPIO to access the LEDs */
at91_set_gpio_output(cpu_led, 1);
at91_set_gpio_output(timer_led, 1);
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
#else
void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
#endif

2
arch/arm/mach-clps711x/Makefile
View File

@ -15,5 +15,3 @@ obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
obj-$(CONFIG_LEDS) += $(leds-y)

63
arch/arm/mach-clps711x/p720t-leds.c
View File

@ -1,63 +0,0 @@
/*
* linux/arch/arm/mach-clps711x/leds.c
*
* Integrator LED control routines
*
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
static void p720t_leds_event(led_event_t ledevt)
{
unsigned long flags;
u32 pddr;
local_irq_save(flags);
switch(ledevt) {
case led_idle_start:
break;
case led_idle_end:
break;
case led_timer:
pddr = clps_readb(PDDR);
clps_writeb(pddr ^ 1, PDDR);
break;
default:
break;
}
local_irq_restore(flags);
}
static int __init leds_init(void)
{
if (machine_is_p720t())
leds_event = p720t_leds_event;
return 0;
}
arch_initcall(leds_init);

62
arch/arm/mach-clps711x/p720t.c
View File

@ -23,6 +23,8 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/pgtable.h>
@ -34,6 +36,8 @@
#include <asm/mach/map.h>
#include <mach/syspld.h>
#include <asm/hardware/clps7111.h>
#include "common.h"
/*
@ -107,6 +111,64 @@ static void __init p720t_init_early(void)
}
}
/*
* LED controled by CPLD
*/
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
static void p720t_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
u8 reg = clps_readb(PDDR);
if (b != LED_OFF)
reg |= 0x1;
else
reg &= ~0x1;
clps_writeb(reg, PDDR);
}
static enum led_brightness p720t_led_get(struct led_classdev *cdev)
{
u8 reg = clps_readb(PDDR);
return (reg & 0x1) ? LED_FULL : LED_OFF;
}
static int __init p720t_leds_init(void)
{
struct led_classdev *cdev;
int ret;
if (!machine_is_p720t())
return -ENODEV;
cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
if (!cdev)
return -ENOMEM;
cdev->name = "p720t:0";
cdev->brightness_set = p720t_led_set;
cdev->brightness_get = p720t_led_get;
cdev->default_trigger = "heartbeat";
ret = led_classdev_register(NULL, cdev);
if (ret < 0) {
kfree(cdev);
return ret;
}
return 0;
}
/*
* Since we may have triggers on any subsystem, defer registration
* until after subsystem_init.
*/
fs_initcall(p720t_leds_init);
#endif
MACHINE_START(P720T, "ARM-Prospector720T")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,

4
arch/arm/mach-ebsa110/Makefile
View File

@ -4,9 +4,7 @@
# Object file lists.
obj-y := core.o io.o
obj-y := core.o io.o leds.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_LEDS) += leds.o

85
arch/arm/mach-ebsa110/leds.c
View File

@ -1,52 +1,71 @@
/*
* linux/arch/arm/mach-ebsa110/leds.c
* Driver for the LED found on the EBSA110 machine
* Based on Versatile and RealView machine LED code
*
* Copyright (C) 1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* EBSA-110 LED control routines. We use the led as follows:
*
* - Red - toggles state every 50 timer interrupts
* License terms: GNU General Public License (GPL) version 2
* Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include "core.h"
static spinlock_t leds_lock;
static void ebsa110_leds_event(led_event_t ledevt)
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
static void ebsa110_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
unsigned long flags;
u8 reg = __raw_readb(SOFT_BASE);
spin_lock_irqsave(&leds_lock, flags);
if (b != LED_OFF)
reg |= 0x80;
else
reg &= ~0x80;
switch(ledevt) {
case led_timer:
*(volatile unsigned char *)SOFT_BASE ^= 128;
break;
default:
break;
}
spin_unlock_irqrestore(&leds_lock, flags);
__raw_writeb(reg, SOFT_BASE);
}
static int __init leds_init(void)
static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
{
if (machine_is_ebsa110())
leds_event = ebsa110_leds_event;
u8 reg = __raw_readb(SOFT_BASE);
return (reg & 0x80) ? LED_FULL : LED_OFF;
}
static int __init ebsa110_leds_init(void)
{
struct led_classdev *cdev;
int ret;
if (!machine_is_ebsa110())
return -ENODEV;
cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
if (!cdev)
return -ENOMEM;
cdev->name = "ebsa110:0";
cdev->brightness_set = ebsa110_led_set;
cdev->brightness_get = ebsa110_led_get;
cdev->default_trigger = "heartbeat";
ret = led_classdev_register(NULL, cdev);
if (ret < 0) {
kfree(cdev);
return ret;
}
return 0;
}
__initcall(leds_init);
/*
* Since we may have triggers on any subsystem, defer registration
* until after subsystem_init.
*/
fs_initcall(ebsa110_leds_init);
#endif

2
arch/arm/mach-exynos/Kconfig
View File

@ -405,6 +405,8 @@ config MACH_EXYNOS4_DT
select USE_OF
select ARM_AMBA
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS4
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.

86
arch/arm/mach-exynos/clock-exynos5.c
View File

@ -547,6 +547,68 @@ static struct clksrc_clk exynos5_clk_aclk_66 = {
.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
};
static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
.clk = {
.name = "mout_aclk_300_gscl_mid",
},
.sources = &exynos5_clkset_aclk,
.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
};
static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
[0] = &exynos5_clk_sclk_vpll.clk,
[1] = &exynos5_clk_mout_cpll.clk,
};
static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
.sources = exynos5_clkset_aclk_300_mid1_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
};
static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
.clk = {
.name = "mout_aclk_300_gscl_mid1",
},
.sources = &exynos5_clkset_aclk_300_gscl_mid1,
.reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
};
static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
[0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
[1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
};
static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
.sources = exynos5_clkset_aclk_300_gscl_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
};
static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
.clk = {
.name = "mout_aclk_300_gscl",
},
.sources = &exynos5_clkset_aclk_300_gscl,
.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
};
static struct clk *exynos5_clk_src_gscl_300_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &exynos5_clk_mout_aclk_300_gscl.clk,
};
static struct clksrc_sources exynos5_clk_src_gscl_300 = {
.sources = exynos5_clk_src_gscl_300_list,
.nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
};
static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
.clk = {
.name = "aclk_300_gscl",
},
.sources = &exynos5_clk_src_gscl_300,
.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
};
static struct clk exynos5_init_clocks_off[] = {
{
.name = "timers",
@ -754,6 +816,26 @@ static struct clk exynos5_init_clocks_off[] = {
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 18),
}, {
.name = "gscl",
.devname = "exynos-gsc.0",
.enable = exynos5_clk_ip_gscl_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "gscl",
.devname = "exynos-gsc.1",
.enable = exynos5_clk_ip_gscl_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "gscl",
.devname = "exynos-gsc.2",
.enable = exynos5_clk_ip_gscl_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "gscl",
.devname = "exynos-gsc.3",
.enable = exynos5_clk_ip_gscl_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = SYSMMU_CLOCK_NAME,
.devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
@ -1225,6 +1307,10 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_aclk_266,
&exynos5_clk_aclk_200,
&exynos5_clk_aclk_166,
&exynos5_clk_aclk_300_gscl,
&exynos5_clk_mout_aclk_300_gscl,
&exynos5_clk_mout_aclk_300_gscl_mid,
&exynos5_clk_mout_aclk_300_gscl_mid1,
&exynos5_clk_aclk_66_pre,
&exynos5_clk_aclk_66,
&exynos5_clk_dout_mmc0,

26
arch/arm/mach-exynos/common.c
View File

@ -980,6 +980,32 @@ static int __init exynos_init_irq_eint(void)
{
int irq;
#ifdef CONFIG_PINCTRL_SAMSUNG
/*
* The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
* functionality along with support for external gpio and wakeup
* interrupts. If the samsung pinctrl driver is enabled and includes
* the wakeup interrupt support, then the setting up external wakeup
* interrupts here can be skipped. This check here is temporary to
* allow exynos4 platforms that do not use Samsung pinctrl driver to
* co-exist with platforms that do. When all of the Samsung Exynos4
* platforms switch over to using the pinctrl driver, the wakeup
* interrupt support code here can be completely removed.
*/
struct device_node *pctrl_np, *wkup_np;
const char *pctrl_compat = "samsung,pinctrl-exynos4210";
const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
if (of_device_is_available(pctrl_np)) {
wkup_np = of_find_compatible_node(pctrl_np, NULL,
wkup_compat);
if (wkup_np)
return -ENODEV;
}
}
#endif
if (soc_is_exynos5250())
exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
else

5
arch/arm/mach-exynos/include/mach/map.h
View File

@ -121,6 +121,11 @@
#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
#define EXYNOS5_PA_GSC0 0x13E00000
#define EXYNOS5_PA_GSC1 0x13E10000
#define EXYNOS5_PA_GSC2 0x13E20000
#define EXYNOS5_PA_GSC3 0x13E30000
#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000
#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000
#define EXYNOS5_PA_SYSMMU_2D 0x10A60000

8
arch/arm/mach-exynos/mach-exynos5-dt.c
View File

@ -56,6 +56,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
"exynos-gsc.0", NULL),
OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
"exynos-gsc.1", NULL),
OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
"exynos-gsc.2", NULL),
OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
"exynos-gsc.3", NULL),
{},
};

4
arch/arm/mach-footbridge/Makefile
View File

@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
obj-$(CONFIG_PCI) +=$(pci-y)
obj-$(CONFIG_LEDS) +=$(leds-y)
obj-$(CONFIG_ISA) += isa.o isa-rtc.o

138
arch/arm/mach-footbridge/ebsa285-leds.c
View File

@ -1,138 +0,0 @@
/*
* linux/arch/arm/mach-footbridge/ebsa285-leds.c
*
* Copyright (C) 1998-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* EBSA-285 control routines.
*
* The EBSA-285 uses the leds as follows:
* - Green - toggles state every 50 timer interrupts
* - Amber - On if system is not idle
* - Red - currently unused
*
* Changelog:
* 02-05-1999 RMK Various cleanups
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
static char led_state;
static char hw_led_state;
static DEFINE_SPINLOCK(leds_lock);
static void ebsa285_leds_event(led_event_t evt)
{
unsigned long flags;
spin_lock_irqsave(&leds_lock, flags);
switch (evt) {
case led_start:
hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
#ifndef CONFIG_LEDS_CPU
hw_led_state |= XBUS_LED_AMBER;
#endif
led_state |= LED_STATE_ENABLED;
break;
case led_stop:
led_state &= ~LED_STATE_ENABLED;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state ^= XBUS_LED_GREEN;
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state |= XBUS_LED_AMBER;
break;
case led_idle_end:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state &= ~XBUS_LED_AMBER;
break;
#endif
case led_halted:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state &= ~XBUS_LED_RED;
break;
case led_green_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~XBUS_LED_GREEN;
break;
case led_green_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= XBUS_LED_GREEN;
break;
case led_amber_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~XBUS_LED_AMBER;
break;
case led_amber_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= XBUS_LED_AMBER;
break;
case led_red_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~XBUS_LED_RED;
break;
case led_red_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= XBUS_LED_RED;
break;
default:
break;
}
if (led_state & LED_STATE_ENABLED)
*XBUS_LEDS = hw_led_state;
spin_unlock_irqrestore(&leds_lock, flags);
}
static int __init leds_init(void)
{
if (machine_is_ebsa285())
leds_event = ebsa285_leds_event;
leds_event(led_start);
return 0;
}
__initcall(leds_init);

81
arch/arm/mach-footbridge/ebsa285.c
View File

@ -5,6 +5,8 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
@ -13,6 +15,85 @@
#include "common.h"
/* LEDs */
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
struct ebsa285_led {
struct led_classdev cdev;
u8 mask;
};
/*
* The triggers lines up below will only be used if the
* LED triggers are compiled in.
*/
static const struct {
const char *name;
const char *trigger;
} ebsa285_leds[] = {
{ "ebsa285:amber", "heartbeat", },
{ "ebsa285:green", "cpu0", },
{ "ebsa285:red",},
};
static void ebsa285_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
if (b != LED_OFF)
*XBUS_LEDS |= led->mask;
else
*XBUS_LEDS &= ~led->mask;
}
static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
{
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
}
static int __init ebsa285_leds_init(void)
{
int i;
if (machine_is_ebsa285())
return -ENODEV;
/* 3 LEDS All ON */
*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
struct ebsa285_led *led;
led = kzalloc(sizeof(*led), GFP_KERNEL);
if (!led)
break;
led->cdev.name = ebsa285_leds[i].name;
led->cdev.brightness_set = ebsa285_led_set;
led->cdev.brightness_get = ebsa285_led_get;
led->cdev.default_trigger = ebsa285_leds[i].trigger;
led->mask = BIT(i);
if (led_classdev_register(NULL, &led->cdev) < 0) {
kfree(led);
break;
}
}
return 0;
}
/*
* Since we may have triggers on any subsystem, defer registration
* until after subsystem_init.
*/
fs_initcall(ebsa285_leds_init);
#endif
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
.atag_offset = 0x100,

112
arch/arm/mach-footbridge/netwinder-hw.c
View File

@ -12,9 +12,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/system_misc.h>
@ -27,13 +28,6 @@
#define GP1_IO_BASE 0x338
#define GP2_IO_BASE 0x33a
#ifdef CONFIG_LEDS
#define DEFAULT_LEDS 0
#else
#define DEFAULT_LEDS GPIO_GREEN_LED
#endif
/*
* Winbond WB83977F accessibility stuff
*/
@ -611,15 +605,9 @@ static void __init rwa010_init(void)
static int __init nw_hw_init(void)
{
if (machine_is_netwinder()) {
unsigned long flags;
wb977_init();
cpld_init();
rwa010_init();
raw_spin_lock_irqsave(&nw_gpio_lock, flags);
nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
return 0;
}
@ -672,6 +660,102 @@ static void netwinder_restart(char mode, const char *cmd)
}
}
/* LEDs */
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
struct netwinder_led {
struct led_classdev cdev;
u8 mask;
};
/*
* The triggers lines up below will only be used if the
* LED triggers are compiled in.
*/
static const struct {
const char *name;
const char *trigger;
} netwinder_leds[] = {
{ "netwinder:green", "heartbeat", },
{ "netwinder:red", "cpu0", },
};
/*
* The LED control in Netwinder is reversed:
* - setting bit means turn off LED
* - clearing bit means turn on LED
*/
static void netwinder_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct netwinder_led *led = container_of(cdev,
struct netwinder_led, cdev);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&nw_gpio_lock, flags);
reg = nw_gpio_read();
if (b != LED_OFF)
reg &= ~led->mask;
else
reg |= led->mask;
nw_gpio_modify_op(led->mask, reg);
spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
{
struct netwinder_led *led = container_of(cdev,
struct netwinder_led, cdev);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&nw_gpio_lock, flags);
reg = nw_gpio_read();
spin_unlock_irqrestore(&nw_gpio_lock, flags);
return (reg & led->mask) ? LED_OFF : LED_FULL;
}
static int __init netwinder_leds_init(void)
{
int i;
if (!machine_is_netwinder())
return -ENODEV;
for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
struct netwinder_led *led;
led = kzalloc(sizeof(*led), GFP_KERNEL);
if (!led)
break;
led->cdev.name = netwinder_leds[i].name;
led->cdev.brightness_set = netwinder_led_set;
led->cdev.brightness_get = netwinder_led_get;
led->cdev.default_trigger = netwinder_leds[i].trigger;
if (i == 0)
led->mask = GPIO_GREEN_LED;
else
led->mask = GPIO_RED_LED;
if (led_classdev_register(NULL, &led->cdev) < 0) {
kfree(led);
break;
}
}
return 0;
}
/*
* Since we may have triggers on any subsystem, defer registration
* until after subsystem_init.
*/
fs_initcall(netwinder_leds_init);
#endif
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.atag_offset = 0x100,

138
arch/arm/mach-footbridge/netwinder-leds.c
View File

@ -1,138 +0,0 @@
/*
* linux/arch/arm/mach-footbridge/netwinder-leds.c
*
* Copyright (C) 1998-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* NetWinder LED control routines.
*
* The Netwinder uses the leds as follows:
* - Green - toggles state every 50 timer interrupts
* - Red - On if the system is not idle
*
* Changelog:
* 02-05-1999 RMK Various cleanups
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
static char led_state;
static char hw_led_state;
static DEFINE_RAW_SPINLOCK(leds_lock);
static void netwinder_leds_event(led_event_t evt)
{
unsigned long flags;
raw_spin_lock_irqsave(&leds_lock, flags);
switch (evt) {
case led_start:
led_state |= LED_STATE_ENABLED;
hw_led_state = GPIO_GREEN_LED;
break;
case led_stop:
led_state &= ~LED_STATE_ENABLED;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = 0;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state ^= GPIO_GREEN_LED;
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state &= ~GPIO_RED_LED;
break;
case led_idle_end:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state |= GPIO_RED_LED;
break;
#endif
case led_halted:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state |= GPIO_RED_LED;
break;
case led_green_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= GPIO_GREEN_LED;
break;
case led_green_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~GPIO_GREEN_LED;
break;
case led_amber_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
break;
case led_amber_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
break;
case led_red_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= GPIO_RED_LED;
break;
case led_red_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~GPIO_RED_LED;
break;
default:
break;
}
raw_spin_unlock_irqrestore(&leds_lock, flags);
if (led_state & LED_STATE_ENABLED) {
raw_spin_lock_irqsave(&nw_gpio_lock, flags);
nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
}
static int __init leds_init(void)
{
if (machine_is_netwinder())
leds_event = netwinder_leds_event;
leds_event(led_start);
return 0;
}
__initcall(leds_init);

3
arch/arm/mach-integrator/Makefile
View File

@ -4,11 +4,10 @@
# Object file lists.
obj-y := core.o lm.o
obj-y := core.o lm.o leds.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o

3
arch/arm/mach-integrator/core.c
View File

@ -28,7 +28,6 @@
#include <mach/cm.h>
#include <mach/irqs.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
@ -128,8 +127,6 @@ static struct amba_pl010_data integrator_uart_data = {
.set_mctrl = integrator_uart_set_mctrl,
};
#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
static DEFINE_RAW_SPINLOCK(cm_lock);
/**

2
arch/arm/mach-integrator/include/mach/cm.h
View File

@ -3,6 +3,8 @@
*/
void cm_control(u32, u32);
#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
#define CM_CTRL_REMAP (1 << 2)

171
arch/arm/mach-integrator/leds.c
View File

@ -1,90 +1,125 @@
/*
* linux/arch/arm/mach-integrator/leds.c
* Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
* Based on Versatile and RealView machine LED code
*
* Integrator/AP and Integrator/CP LED control routines
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* License terms: GNU General Public License (GPL) version 2
* Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <mach/cm.h>
static int saved_leds;
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
static void integrator_leds_event(led_event_t ledevt)
#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
struct integrator_led {
struct led_classdev cdev;
u8 mask;
};
/*
* The triggers lines up below will only be used if the
* LED triggers are compiled in.
*/
static const struct {
const char *name;
const char *trigger;
} integrator_leds[] = {
{ "integrator:green0", "heartbeat", },
{ "integrator:yellow", },
{ "integrator:red", },
{ "integrator:green1", },
{ "integrator:core_module", "cpu0", },
};
static void integrator_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
unsigned long flags;
const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
unsigned int update_alpha_leds;
struct integrator_led *led = container_of(cdev,
struct integrator_led, cdev);
u32 reg = __raw_readl(LEDREG);
// yup, change the LEDs
local_irq_save(flags);
update_alpha_leds = 0;
if (b != LED_OFF)
reg |= led->mask;
else
reg &= ~led->mask;
switch(ledevt) {
case led_idle_start:
cm_control(CM_CTRL_LED, 0);
break;
while (__raw_readl(ALPHA_REG) & 1)
cpu_relax();
case led_idle_end:
cm_control(CM_CTRL_LED, CM_CTRL_LED);
break;
case led_timer:
saved_leds ^= GREEN_LED;
update_alpha_leds = 1;
break;
case led_red_on:
saved_leds |= RED_LED;
update_alpha_leds = 1;
break;
case led_red_off:
saved_leds &= ~RED_LED;
update_alpha_leds = 1;
break;
default:
break;
}
if (update_alpha_leds) {
while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
__raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
}
local_irq_restore(flags);
__raw_writel(reg, LEDREG);
}
static int __init leds_init(void)
static enum led_brightness integrator_led_get(struct led_classdev *cdev)
{
if (machine_is_integrator() || machine_is_cintegrator())
leds_event = integrator_leds_event;
struct integrator_led *led = container_of(cdev,
struct integrator_led, cdev);
u32 reg = __raw_readl(LEDREG);
return (reg & led->mask) ? LED_FULL : LED_OFF;
}
static void cm_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
if (b != LED_OFF)
cm_control(CM_CTRL_LED, CM_CTRL_LED);
else
cm_control(CM_CTRL_LED, 0);
}
static enum led_brightness cm_led_get(struct led_classdev *cdev)
{
u32 reg = readl(CM_CTRL);
return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
}
static int __init integrator_leds_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
struct integrator_led *led;
led = kzalloc(sizeof(*led), GFP_KERNEL);
if (!led)
break;
led->cdev.name = integrator_leds[i].name;
if (i == 4) { /* Setting for LED in core module */
led->cdev.brightness_set = cm_led_set;
led->cdev.brightness_get = cm_led_get;
} else {
led->cdev.brightness_set = integrator_led_set;
led->cdev.brightness_get = integrator_led_get;
}
led->cdev.default_trigger = integrator_leds[i].trigger;
led->mask = BIT(i);
if (led_classdev_register(NULL, &led->cdev) < 0) {
kfree(led);
break;
}
}
return 0;
}
core_initcall(leds_init);
/*
* Since we may have triggers on any subsystem, defer registration
* until after subsystem_init.
*/
fs_initcall(integrator_leds_init);
#endif

3
arch/arm/mach-ks8695/Makefile
View File

@ -11,9 +11,6 @@ obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
# LEDs
obj-$(CONFIG_LEDS) += leds.o
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o

21
arch/arm/mach-ks8695/devices.c
View File

@ -182,27 +182,6 @@ static void __init ks8695_add_device_watchdog(void)
}
/* --------------------------------------------------------------------
* LEDs
* -------------------------------------------------------------------- */
#if defined(CONFIG_LEDS)
short ks8695_leds_cpu = -1;
short ks8695_leds_timer = -1;
void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
{
/* Enable GPIO to access the LEDs */
gpio_direction_output(cpu_led, 1);
gpio_direction_output(timer_led, 1);
ks8695_leds_cpu = cpu_led;
ks8695_leds_timer = timer_led;
}
#else
void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
#endif
/* -------------------------------------------------------------------- */
/*

5
arch/arm/mach-ks8695/include/mach/devices.h
View File

@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
/* LEDs */
extern short ks8695_leds_cpu;
extern short ks8695_leds_timer;
extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
/* PCI */
#define KS8695_MODE_PCI 0
#define KS8695_MODE_MINIPCI 1

92
arch/arm/mach-ks8695/leds.c
View File

@ -1,92 +0,0 @@
/*
* LED driver for KS8695-based boards.
*
* Copyright (C) Andrew Victor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/leds.h>
#include <mach/devices.h>
static inline void ks8695_led_on(unsigned int led)
{
gpio_set_value(led, 0);
}
static inline void ks8695_led_off(unsigned int led)
{
gpio_set_value(led, 1);
}
static inline void ks8695_led_toggle(unsigned int led)
{
unsigned long is_off = gpio_get_value(led);
if (is_off)
ks8695_led_on(led);
else
ks8695_led_off(led);
}
/*
* Handle LED events.
*/
static void ks8695_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch(evt) {
case led_start: /* System startup */
ks8695_led_on(ks8695_leds_cpu);
break;
case led_stop: /* System stop / suspend */
ks8695_led_off(ks8695_leds_cpu);
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer: /* Every 50 timer ticks */
ks8695_led_toggle(ks8695_leds_timer);
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start: /* Entering idle state */
ks8695_led_off(ks8695_leds_cpu);
break;
case led_idle_end: /* Exit idle state */
ks8695_led_on(ks8695_leds_cpu);
break;
#endif
default:
break;
}
local_irq_restore(flags);
}
static int __init leds_init(void)
{
if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
return -ENODEV;
leds_event = ks8695_leds_event;
leds_event(led_start);
return 0;
}
__initcall(leds_init);

8
arch/arm/mach-omap1/Makefile
View File

@ -61,14 +61,6 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
# LEDs support
led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
obj-$(CONFIG_LEDS) += $(led-y)
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif

32
arch/arm/mach-omap1/board-h2.c
View File

@ -32,6 +32,7 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -307,12 +308,39 @@ static struct platform_device h2_irda_device = {
.resource = h2_irda_resources,
};
static struct gpio_led h2_gpio_led_pins[] = {
{
.name = "h2:red",
.default_trigger = "heartbeat",
.gpio = 3,
},
{
.name = "h2:green",
.default_trigger = "cpu0",
.gpio = OMAP_MPUIO(4),
},
};
static struct gpio_led_platform_data h2_gpio_led_data = {
.leds = h2_gpio_led_pins,
.num_leds = ARRAY_SIZE(h2_gpio_led_pins),
};
static struct platform_device h2_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &h2_gpio_led_data,
},
};
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
&h2_gpio_leds,
};
static void __init h2_init_smc91x(void)
@ -407,6 +435,10 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
/* GPIO based LEDs */
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
h2_smc91x_resources[1].start = gpio_to_irq(0);
h2_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));

32
arch/arm/mach-omap1/board-h3.c
View File

@ -32,6 +32,7 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
@ -325,6 +326,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
},
};
static struct gpio_led h3_gpio_led_pins[] = {
{
.name = "h3:red",
.default_trigger = "heartbeat",
.gpio = 3,
},
{
.name = "h3:green",
.default_trigger = "cpu0",
.gpio = OMAP_MPUIO(4),
},
};
static struct gpio_led_platform_data h3_gpio_led_data = {
.leds = h3_gpio_led_pins,
.num_leds = ARRAY_SIZE(h3_gpio_led_pins),
};
static struct platform_device h3_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &h3_gpio_led_data,
},
};
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@ -332,6 +359,7 @@ static struct platform_device *devices[] __initdata = {
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
&h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
@ -399,6 +427,10 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
/* GPIO based LEDs */
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
smc91x_resources[1].start = gpio_to_irq(40);
smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));

33
arch/arm/mach-omap1/board-osk.c
View File

@ -382,10 +382,37 @@ static struct platform_device osk5912_lcd_device = {
.id = -1,
};
static struct gpio_led mistral_gpio_led_pins[] = {
{
.name = "mistral:red",
.default_trigger = "heartbeat",
.gpio = 3,
},
{
.name = "mistral:green",
.default_trigger = "cpu0",
.gpio = OMAP_MPUIO(4),
},
};
static struct gpio_led_platform_data mistral_gpio_led_data = {
.leds = mistral_gpio_led_pins,
.num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
};
static struct platform_device mistral_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mistral_gpio_led_data,
},
};
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
&mistral_bl_device,
&osk5912_lcd_device,
&mistral_gpio_leds,
};
static int mistral_get_pendown_state(void)
@ -510,6 +537,12 @@ static void __init osk_mistral_init(void)
if (gpio_request(2, "lcd_pwr") == 0)
gpio_direction_output(2, 1);
/*
* GPIO based LEDs
*/
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
i2c_register_board_info(1, mistral_i2c_board_info,
ARRAY_SIZE(mistral_i2c_board_info));

169
arch/arm/mach-omap1/leds-h2p2-debug.c
View File

@ -1,169 +0,0 @@
/*
* linux/arch/arm/mach-omap1/leds-h2p2-debug.c
*
* Copyright 2003 by Texas Instruments Incorporated
*
* There are 16 LEDs on the debug board (all green); four may be used
* for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
*
* The "surfer" expansion board and H2 sample board also have two-color
* green+red LEDs (in parallel), used here for timer and idle indicators.
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
#include "leds.h"
#define GPIO_LED_RED 3
#define GPIO_LED_GREEN OMAP_MPUIO(4)
#define LED_STATE_ENABLED 0x01
#define LED_STATE_CLAIMED 0x02
#define LED_TIMER_ON 0x04
#define GPIO_IDLE GPIO_LED_GREEN
#define GPIO_TIMER GPIO_LED_RED
void h2p2_dbg_leds_event(led_event_t evt)
{
unsigned long flags;
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 led_state, hw_led_state;
local_irq_save(flags);
if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
goto done;
switch (evt) {
case led_start:
if (!fpga)
fpga = ioremap(H2P2_DBG_FPGA_START,
H2P2_DBG_FPGA_SIZE);
if (fpga) {
led_state |= LED_STATE_ENABLED;
__raw_writew(~0, &fpga->leds);
}
break;
case led_stop:
case led_halted:
/* all leds off during suspend or shutdown */
if (! machine_is_omap_perseus2()) {
gpio_set_value(GPIO_TIMER, 0);
gpio_set_value(GPIO_IDLE, 0);
}
led_state &= ~LED_STATE_ENABLED;
if (fpga) {
__raw_writew(~0, &fpga->leds);
if (evt == led_halted) {
iounmap(fpga);
fpga = NULL;
}
}
goto done;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
led_state ^= LED_TIMER_ON;
if (machine_is_omap_perseus2())
hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
else {
gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
goto done;
}
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
if (machine_is_omap_perseus2())
hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
else {
gpio_set_value(GPIO_IDLE, 1);
goto done;
}
break;
case led_idle_end:
if (machine_is_omap_perseus2())
hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
else {
gpio_set_value(GPIO_IDLE, 0);
goto done;
}
break;
#endif
case led_green_on:
hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
break;
case led_green_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
break;
case led_amber_on:
hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
break;
case led_amber_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
break;
case led_red_on:
hw_led_state |= H2P2_DBG_FPGA_LED_RED;
break;
case led_red_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
break;
case led_blue_on:
hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
break;
case led_blue_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
break;
default:
break;
}
/*
* Actually burn the LEDs
*/
if (led_state & LED_STATE_ENABLED && fpga)
__raw_writew(~hw_led_state, &fpga->leds);
done:
local_irq_restore(flags);
}

98
arch/arm/mach-omap1/leds-innovator.c
View File

@ -1,98 +0,0 @@
/*
* linux/arch/arm/mach-omap1/leds-innovator.c
*/
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include "leds.h"
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
static unsigned int led_state;
static unsigned int hw_led_state;
void innovator_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch (evt) {
case led_start:
hw_led_state = 0;
led_state = LED_STATE_ENABLED;
break;
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = 0;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state ^= 0;
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state |= 0;
break;
case led_idle_end:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state &= ~0;
break;
#endif
case led_halted:
break;
case led_green_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~0;
break;
case led_green_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= 0;
break;
case led_amber_on:
break;
case led_amber_off:
break;
case led_red_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~0;
break;
case led_red_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= 0;
break;
default:
break;
}
local_irq_restore(flags);
}

113
arch/arm/mach-omap1/leds-osk.c
View File

@ -1,113 +0,0 @@
/*
* linux/arch/arm/mach-omap1/leds-osk.c
*
* LED driver for OSK with optional Mistral QVGA board
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include "leds.h"
#define LED_STATE_ENABLED (1 << 0)
#define LED_STATE_CLAIMED (1 << 1)
static u8 led_state;
#define TIMER_LED (1 << 3) /* Mistral board */
#define IDLE_LED (1 << 4) /* Mistral board */
static u8 hw_led_state;
#ifdef CONFIG_OMAP_OSK_MISTRAL
/* For now, all system indicators require the Mistral board, since that
* LED can be manipulated without a task context. This LED is either red,
* or green, but not both; it can't give the full "disco led" effect.
*/
#define GPIO_LED_RED 3
#define GPIO_LED_GREEN OMAP_MPUIO(4)
static void mistral_setled(void)
{
int red = 0;
int green = 0;
if (hw_led_state & TIMER_LED)
red = 1;
else if (hw_led_state & IDLE_LED)
green = 1;
/* else both sides are disabled */
gpio_set_value(GPIO_LED_GREEN, green);
gpio_set_value(GPIO_LED_RED, red);
}
#endif
void osk_leds_event(led_event_t evt)
{
unsigned long flags;
u16 leds;
local_irq_save(flags);
if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
goto done;
leds = hw_led_state;
switch (evt) {
case led_start:
led_state |= LED_STATE_ENABLED;
hw_led_state = 0;
leds = ~0;
break;
case led_halted:
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
leds = ~0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = 0;
break;
#ifdef CONFIG_OMAP_OSK_MISTRAL
case led_timer:
hw_led_state ^= TIMER_LED;
mistral_setled();
break;
case led_idle_start: /* idle == off */
hw_led_state &= ~IDLE_LED;
mistral_setled();
break;
case led_idle_end:
hw_led_state |= IDLE_LED;
mistral_setled();
break;
#endif /* CONFIG_OMAP_OSK_MISTRAL */
default:
break;
}
leds ^= hw_led_state;
done:
local_irq_restore(flags);
}

70
arch/arm/mach-omap1/leds.c
View File

@ -1,70 +0,0 @@
/*
* linux/arch/arm/mach-omap1/leds.c
*
* OMAP LEDs dispatcher
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <mach/mux.h>
#include "leds.h"
static int __init
omap_leds_init(void)
{
if (!cpu_class_is_omap1())
return -ENODEV;
if (machine_is_omap_innovator())
leds_event = innovator_leds_event;
else if (machine_is_omap_h2()
|| machine_is_omap_h3()
|| machine_is_omap_perseus2())
leds_event = h2p2_dbg_leds_event;
else if (machine_is_omap_osk())
leds_event = osk_leds_event;
else
return -1;
if (machine_is_omap_h2()
|| machine_is_omap_h3()
#ifdef CONFIG_OMAP_OSK_MISTRAL
|| machine_is_omap_osk()
#endif
) {
/* LED1/LED2 pins can be used as GPIO (as done here), or by
* the LPG (works even in deep sleep!), to drive a bicolor
* LED on the H2 sample board, and another on the H2/P2
* "surfer" expansion board.
*
* The same pins drive a LED on the OSK Mistral board, but
* that's a different kind of LED (just one color at a time).
*/
omap_cfg_reg(P18_1610_GPIO3);
if (gpio_request(3, "LED red") == 0)
gpio_direction_output(3, 1);
else
printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
omap_cfg_reg(MPUIO4);
if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
gpio_direction_output(OMAP_MPUIO(4), 1);
else
printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
}
leds_event(led_start);
return 0;
}
__initcall(omap_leds_init);

3
arch/arm/mach-omap1/leds.h
View File

@ -1,3 +0,0 @@
extern void innovator_leds_event(led_event_t evt);
extern void h2p2_dbg_leds_event(led_event_t evt);
extern void osk_leds_event(led_event_t evt);

1
arch/arm/mach-omap1/time.c
View File

@ -44,7 +44,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>

1
arch/arm/mach-omap1/timer32k.c
View File

@ -46,7 +46,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>

2
arch/arm/mach-omap2/Kconfig
View File

@ -48,6 +48,7 @@ config ARCH_OMAP3
select ARM_CPU_SUSPEND if PM
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
select OMAP_INTERCONNECT
config ARCH_OMAP4
bool "TI OMAP4"
@ -67,6 +68,7 @@ config ARCH_OMAP4
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"

5
arch/arm/mach-omap2/Makefile
View File

@ -180,11 +180,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
# L3 interconnect
obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
obj-$(CONFIG_SOC_OMAP5) += omap_l3_noc.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o

1
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
View File

@ -18,7 +18,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>

1
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
View File

@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>

72
arch/arm/mach-orion5x/rd88f5182-setup.c
View File

@ -19,8 +19,8 @@
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@ -53,12 +53,6 @@
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
/*
* GPIO Debug LED
*/
#define RD88F5182_GPIO_DBG_LED 0
/*****************************************************************************
* 16M NOR Flash on Device bus CS1
****************************************************************************/
@ -83,55 +77,32 @@ static struct platform_device rd88f5182_nor_flash = {
.resource = &rd88f5182_nor_flash_resource,
};
#ifdef CONFIG_LEDS
/*****************************************************************************
* Use GPIO debug led as CPU active indication
* Use GPIO LED as CPU active indication
****************************************************************************/
static void rd88f5182_dbgled_event(led_event_t evt)
{
int val;
#define RD88F5182_GPIO_LED 0
if (evt == led_idle_end)
val = 1;
else if (evt == led_idle_start)
val = 0;
else
return;
static struct gpio_led rd88f5182_gpio_led_pins[] = {
{
.name = "rd88f5182:cpu",
.default_trigger = "cpu0",
.gpio = RD88F5182_GPIO_LED,
},
};
gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
}
static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
.leds = rd88f5182_gpio_led_pins,
.num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
};
static int __init rd88f5182_dbgled_init(void)
{
int pin;
if (machine_is_rd88f5182()) {
pin = RD88F5182_GPIO_DBG_LED;
if (gpio_request(pin, "DBGLED") == 0) {
if (gpio_direction_output(pin, 0) != 0) {
printk(KERN_ERR "rd88f5182_dbgled_init failed "
"to set output pin %d\n", pin);
gpio_free(pin);
return 0;
}
} else {
printk(KERN_ERR "rd88f5182_dbgled_init failed "
"to request gpio %d\n", pin);
return 0;
}
leds_event = rd88f5182_dbgled_event;
}
return 0;
}
__initcall(rd88f5182_dbgled_init);
#endif
static struct platform_device rd88f5182_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &rd88f5182_gpio_led_data,
},
};
/*****************************************************************************
* PCI
@ -298,6 +269,7 @@ static void __init rd88f5182_init(void)
orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
platform_device_register(&rd88f5182_gpio_leds);
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
}

1
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
View File

@ -20,7 +20,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>

8
arch/arm/mach-pxa/Makefile
View File

@ -98,12 +98,4 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
# Support for blinky lights
led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
obj-$(CONFIG_LEDS) += $(led-y)
obj-$(CONFIG_TOSA_BT) += tosa-bt.o

Some files were not shown because too many files have changed in this diff Show More