ARM: kirkwood: Basic support for DNS-320 and DNS-325
Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
parent
36be50515f
commit
9007d10073
|
@ -0,0 +1,29 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "kirkwood.dtsi"
|
||||
|
||||
/ {
|
||||
model = "D-Link DNS-320 NAS (Rev A1)";
|
||||
compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
clock-frequency = <166666667>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@12100 {
|
||||
clock-frequency = <166666667>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
|
@ -0,0 +1,24 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "kirkwood.dtsi"
|
||||
|
||||
/ {
|
||||
model = "D-Link DNS-325 NAS (Rev A1)";
|
||||
compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
clock-frequency = <200000000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
|
@ -58,6 +58,14 @@ config MACH_DREAMPLUG_DT
|
|||
Say 'Y' here if you want your kernel to support the
|
||||
Marvell DreamPlug (Flattened Device Tree).
|
||||
|
||||
config MACH_DLINK_KIRKWOOD_DT
|
||||
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
|
||||
select ARCH_KIRKWOOD_DT
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
|
||||
using Flattened Device Tree.
|
||||
|
||||
config MACH_TS219
|
||||
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
|
||||
help
|
||||
|
|
|
@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
|
|||
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
||||
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
|
||||
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
|
||||
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
|
||||
|
|
|
@ -3,3 +3,5 @@ params_phys-y := 0x00000100
|
|||
initrd_phys-y := 0x00800000
|
||||
|
||||
dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
|
||||
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
|
||||
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
|
||||
|
|
|
@ -0,0 +1,275 @@
|
|||
/*
|
||||
* Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
|
||||
*
|
||||
* arch/arm/mach-kirkwood/board-dnskw.c
|
||||
*
|
||||
* D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
|
||||
* flattened device tree yet.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/gpio-fan.h>
|
||||
#include <linux/leds.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include <mach/bridge-regs.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
static struct mv643xx_eth_platform_data dnskw_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
||||
};
|
||||
|
||||
static struct mv_sata_platform_data dnskw_sata_data = {
|
||||
.n_ports = 2,
|
||||
};
|
||||
|
||||
static unsigned int dnskw_mpp_config[] __initdata = {
|
||||
MPP13_UART1_TXD, /* Custom ... */
|
||||
MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */
|
||||
MPP20_SATA1_ACTn, /* LED: White Right HDD */
|
||||
MPP21_SATA0_ACTn, /* LED: White Left HDD */
|
||||
MPP24_GPIO,
|
||||
MPP25_GPIO,
|
||||
MPP26_GPIO, /* LED: Power */
|
||||
MPP27_GPIO, /* LED: Red Right HDD */
|
||||
MPP28_GPIO, /* LED: Red Left HDD */
|
||||
MPP29_GPIO, /* LED: Red USB (DNS-325 only) */
|
||||
MPP30_GPIO,
|
||||
MPP31_GPIO,
|
||||
MPP32_GPIO,
|
||||
MPP33_GPO,
|
||||
MPP34_GPIO, /* Button: Front power */
|
||||
MPP35_GPIO, /* LED: Red USB (DNS-320 only) */
|
||||
MPP36_GPIO, /* Power: Turn off board */
|
||||
MPP37_GPIO, /* Power: Turn back on after power failure */
|
||||
MPP38_GPIO,
|
||||
MPP39_GPIO, /* Power: SATA0 */
|
||||
MPP40_GPIO, /* Power: SATA1 */
|
||||
MPP41_GPIO, /* SATA0 present */
|
||||
MPP42_GPIO, /* SATA1 present */
|
||||
MPP43_GPIO, /* LED: White USB */
|
||||
MPP44_GPIO, /* Fan: Tachometer Pin */
|
||||
MPP45_GPIO, /* Fan: high speed */
|
||||
MPP46_GPIO, /* Fan: low speed */
|
||||
MPP47_GPIO, /* Button: Back unmount */
|
||||
MPP48_GPIO, /* Button: Back reset */
|
||||
MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
|
||||
0
|
||||
};
|
||||
|
||||
static struct gpio_led dns325_led_pins[] = {
|
||||
{
|
||||
.name = "dns325:white:power",
|
||||
.gpio = 26,
|
||||
.active_low = 1,
|
||||
.default_trigger = "default-on",
|
||||
},
|
||||
{
|
||||
.name = "dns325:white:usb",
|
||||
.gpio = 43,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dns325:red:l_hdd",
|
||||
.gpio = 28,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dns325:red:r_hdd",
|
||||
.gpio = 27,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dns325:red:usb",
|
||||
.gpio = 29,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data dns325_led_data = {
|
||||
.num_leds = ARRAY_SIZE(dns325_led_pins),
|
||||
.leds = dns325_led_pins,
|
||||
};
|
||||
|
||||
static struct platform_device dns325_led_device = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &dns325_led_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led dns320_led_pins[] = {
|
||||
{
|
||||
.name = "dns320:blue:power",
|
||||
.gpio = 26,
|
||||
.active_low = 1,
|
||||
.default_trigger = "default-on",
|
||||
},
|
||||
{
|
||||
.name = "dns320:blue:usb",
|
||||
.gpio = 43,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dns320:orange:l_hdd",
|
||||
.gpio = 28,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dns320:orange:r_hdd",
|
||||
.gpio = 27,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "dns320:orange:usb",
|
||||
.gpio = 35,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data dns320_led_data = {
|
||||
.num_leds = ARRAY_SIZE(dns320_led_pins),
|
||||
.leds = dns320_led_pins,
|
||||
};
|
||||
|
||||
static struct platform_device dns320_led_device = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &dns320_led_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct i2c_board_info dns325_i2c_board_info[] __initdata = {
|
||||
{
|
||||
I2C_BOARD_INFO("lm75", 0x48),
|
||||
},
|
||||
/* Something at 0x0c also */
|
||||
};
|
||||
|
||||
static struct gpio_keys_button dnskw_button_pins[] = {
|
||||
{
|
||||
.code = KEY_POWER,
|
||||
.gpio = 34,
|
||||
.desc = "Power button",
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.code = KEY_EJECTCD,
|
||||
.gpio = 47,
|
||||
.desc = "USB unmount button",
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.code = KEY_RESTART,
|
||||
.gpio = 48,
|
||||
.desc = "Reset button",
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data dnskw_button_data = {
|
||||
.buttons = dnskw_button_pins,
|
||||
.nbuttons = ARRAY_SIZE(dnskw_button_pins),
|
||||
};
|
||||
|
||||
static struct platform_device dnskw_button_device = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.num_resources = 0,
|
||||
.dev = {
|
||||
.platform_data = &dnskw_button_data,
|
||||
}
|
||||
};
|
||||
|
||||
/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
|
||||
static struct gpio_fan_speed dnskw_fan_speed[] = {
|
||||
{ 0, 0 },
|
||||
{ 3000, 1 },
|
||||
{ 6000, 2 },
|
||||
};
|
||||
static unsigned dnskw_fan_pins[] = {46, 45};
|
||||
|
||||
static struct gpio_fan_platform_data dnskw_fan_data = {
|
||||
.num_ctrl = ARRAY_SIZE(dnskw_fan_pins),
|
||||
.ctrl = dnskw_fan_pins,
|
||||
.num_speed = ARRAY_SIZE(dnskw_fan_speed),
|
||||
.speed = dnskw_fan_speed,
|
||||
};
|
||||
|
||||
static struct platform_device dnskw_fan_device = {
|
||||
.name = "gpio-fan",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &dnskw_fan_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void dnskw_power_off(void)
|
||||
{
|
||||
gpio_set_value(36, 1);
|
||||
}
|
||||
|
||||
/* Register any GPIO for output and set the value */
|
||||
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
|
||||
{
|
||||
if (gpio_request(gpio, name) == 0 &&
|
||||
gpio_direction_output(gpio, 0) == 0) {
|
||||
gpio_set_value(gpio, def);
|
||||
if (gpio_export(gpio, 0) != 0)
|
||||
pr_err("dnskw: Failed to export GPIO %s\n", name);
|
||||
} else
|
||||
pr_err("dnskw: Failed to register %s\n", name);
|
||||
}
|
||||
|
||||
void __init dnskw_init(void)
|
||||
{
|
||||
kirkwood_mpp_conf(dnskw_mpp_config);
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&dnskw_ge00_data);
|
||||
kirkwood_sata_init(&dnskw_sata_data);
|
||||
kirkwood_i2c_init();
|
||||
|
||||
platform_device_register(&dnskw_button_device);
|
||||
platform_device_register(&dnskw_fan_device);
|
||||
|
||||
if (of_machine_is_compatible("dlink,dns-325")) {
|
||||
i2c_register_board_info(0, dns325_i2c_board_info,
|
||||
ARRAY_SIZE(dns325_i2c_board_info));
|
||||
platform_device_register(&dns325_led_device);
|
||||
|
||||
} else if (of_machine_is_compatible("dlink,dns-320"))
|
||||
platform_device_register(&dns320_led_device);
|
||||
|
||||
/* Register power-off GPIO. */
|
||||
if (gpio_request(36, "dnskw:power:off") == 0
|
||||
&& gpio_direction_output(36, 0) == 0)
|
||||
pm_power_off = dnskw_power_off;
|
||||
else
|
||||
pr_err("dnskw: failed to configure power-off GPIO\n");
|
||||
|
||||
/* Ensure power is supplied to both HDDs */
|
||||
dnskw_gpio_register(39, "dnskw:power:sata0", 1);
|
||||
dnskw_gpio_register(40, "dnskw:power:sata1", 1);
|
||||
|
||||
/* Set NAS to turn back on after a power failure */
|
||||
dnskw_gpio_register(37, "dnskw:power:recover", 1);
|
||||
}
|
|
@ -56,11 +56,16 @@ static void __init kirkwood_dt_init(void)
|
|||
if (of_machine_is_compatible("globalscale,dreamplug"))
|
||||
dreamplug_init();
|
||||
|
||||
if (of_machine_is_compatible("dlink,dns-kirkwood"))
|
||||
dnskw_init();
|
||||
|
||||
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
|
||||
}
|
||||
|
||||
static const char *kirkwood_dt_board_compat[] = {
|
||||
"globalscale,dreamplug",
|
||||
"dlink,dns-320",
|
||||
"dlink,dns-325",
|
||||
NULL
|
||||
};
|
||||
|
||||
|
|
|
@ -58,6 +58,12 @@ void dreamplug_init(void);
|
|||
static inline void dreamplug_init(void) {};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
|
||||
void dnskw_init(void);
|
||||
#else
|
||||
static inline void dnskw_init(void) {};
|
||||
#endif
|
||||
|
||||
/* early init functions not converted to fdt yet */
|
||||
char *kirkwood_id(void);
|
||||
void kirkwood_l2_init(void);
|
||||
|
|
Loading…
Reference in New Issue