Merge branch 'linux-2.6'

This commit is contained in:
Paul Mackerras 2008-01-24 10:07:21 +11:00
commit 9156ad4833
459 changed files with 4194 additions and 3000 deletions

View File

@ -527,29 +527,30 @@ and is between 256 and 4096 characters. It is defined in the file
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
default_blu= [VT]
vt.default_blu= [VT]
Format: <blue0>,<blue1>,<blue2>,...,<blue15>
Change the default blue palette of the console.
This is a 16-member array composed of values
ranging from 0-255.
default_grn= [VT]
vt.default_grn= [VT]
Format: <green0>,<green1>,<green2>,...,<green15>
Change the default green palette of the console.
This is a 16-member array composed of values
ranging from 0-255.
default_red= [VT]
vt.default_red= [VT]
Format: <red0>,<red1>,<red2>,...,<red15>
Change the default red palette of the console.
This is a 16-member array composed of values
ranging from 0-255.
default_utf8= [VT]
vt.default_utf8=
[VT]
Format=<0|1>
Set system-wide default UTF-8 mode for all tty's.
Default is 0 and by setting to 1, it enables UTF-8
mode for all newly opened or allocated terminals.
Default is 1, i.e. UTF-8 mode is enabled for all
newly opened terminals.
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.
@ -883,6 +884,14 @@ and is between 256 and 4096 characters. It is defined in the file
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in
C2 power state.
libata.dma= [LIBATA] DMA control
libata.dma=0 Disable all PATA and SATA DMA
libata.dma=1 PATA and SATA Disk DMA only
libata.dma=2 ATAPI (CDROM) DMA only
libata.dma=4 Compact Flash DMA only
Combinations also work, so libata.dma=3 enables DMA
for disks and CDROMs, but not CFs.
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
Format: <int>

View File

@ -45,29 +45,6 @@ long fails. The definition looks like :
typedef struct { atomic_long_t a; } local_t;
* Rules to follow when using local atomic operations
- Variables touched by local ops must be per cpu variables.
- _Only_ the CPU owner of these variables must write to them.
- This CPU can use local ops from any context (process, irq, softirq, nmi, ...)
to update its local_t variables.
- Preemption (or interrupts) must be disabled when using local ops in
process context to make sure the process won't be migrated to a
different CPU between getting the per-cpu variable and doing the
actual local op.
- When using local ops in interrupt context, no special care must be
taken on a mainline kernel, since they will run on the local CPU with
preemption already disabled. I suggest, however, to explicitly
disable preemption anyway to make sure it will still work correctly on
-rt kernels.
- Reading the local cpu variable will provide the current copy of the
variable.
- Reads of these variables can be done from any CPU, because updates to
"long", aligned, variables are always atomic. Since no memory
synchronization is done by the writer CPU, an outdated copy of the
variable can be read when reading some _other_ cpu's variables.
* Rules to follow when using local atomic operations
- Variables touched by local ops must be per cpu variables.

View File

@ -61,7 +61,10 @@ Transmit path guidelines:
2) Do not forget to update netdev->trans_start to jiffies after
each new tx packet is given to the hardware.
3) Do not forget that once you return 0 from your hard_start_xmit
3) A hard_start_xmit method must not modify the shared parts of a
cloned SKB.
4) Do not forget that once you return 0 from your hard_start_xmit
method, it is your driver's responsibility to free up the SKB
and in some finite amount of time.

View File

@ -12,8 +12,8 @@ and many Linux driver to support it.
"wavelan" driver (old ISA Wavelan)
----------------
o Config : Network device -> Wireless LAN -> AT&T WaveLAN
o Location : .../drivers/net/wavelan*
o in-line doc : .../drivers/net/wavelan.p.h
o Location : .../drivers/net/wireless/wavelan*
o in-line doc : .../drivers/net/wireless/wavelan.p.h
o on-line doc :
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html

View File

@ -97,10 +97,6 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
autoconfiguration will take place. The most common way to use this
is "ip=dhcp".
Note that "ip=off" is not the same thing as "ip=::::::off", because in
the latter autoconfiguration will take place if any of DHCP, BOOTP or RARP
are compiled in the kernel.
<client-ip> IP address of the client.
Default: Determined using autoconfiguration.
@ -149,7 +145,9 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
this option.
off or none: don't use autoconfiguration
(do static IP assignment instead)
on or any: use any protocol available in the kernel
(default)
dhcp: use DHCP
bootp: use BOOTP
rarp: use RARP

View File

@ -42,23 +42,27 @@ like this source file: see Documentation/watchdog/src/watchdog-simple.c
A more advanced driver could for example check that a HTTP server is
still responding before doing the write call to ping the watchdog.
When the device is closed, the watchdog is disabled. This is not
always such a good idea, since if there is a bug in the watchdog
daemon and it crashes the system will not reboot. Because of this,
some of the drivers support the configuration option "Disable watchdog
shutdown on close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when
compiling the kernel, there is no way of disabling the watchdog once
it has been started. So, if the watchdog daemon crashes, the system
will reboot after the timeout has passed. Watchdog devices also usually
support the nowayout module parameter so that this option can be controlled
at runtime.
When the device is closed, the watchdog is disabled, unless the "Magic
Close" feature is supported (see below). This is not always such a
good idea, since if there is a bug in the watchdog daemon and it
crashes the system will not reboot. Because of this, some of the
drivers support the configuration option "Disable watchdog shutdown on
close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when compiling
the kernel, there is no way of disabling the watchdog once it has been
started. So, if the watchdog daemon crashes, the system will reboot
after the timeout has passed. Watchdog devices also usually support
the nowayout module parameter so that this option can be controlled at
runtime.
Drivers will not disable the watchdog, unless a specific magic character 'V'
has been sent /dev/watchdog just before closing the file. If the userspace
daemon closes the file without sending this special character, the driver
will assume that the daemon (and userspace in general) died, and will stop
pinging the watchdog without disabling it first. This will then cause a
reboot if the watchdog is not re-opened in sufficient time.
Magic Close feature:
If a driver supports "Magic Close", the driver will not disable the
watchdog unless a specific magic character 'V' has been sent to
/dev/watchdog just before closing the file. If the userspace daemon
closes the file without sending this special character, the driver
will assume that the daemon (and userspace in general) died, and will
stop pinging the watchdog without disabling it first. This will then
cause a reboot if the watchdog is not re-opened in sufficient time.
The ioctl API:

View File

@ -665,12 +665,18 @@ S: Maintained
ATMEL AT91 MCI DRIVER
P: Nicolas Ferre
M: nicolas.ferre@rfo.atmel.com
M: nicolas.ferre@atmel.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
S: Maintained
ATMEL LCDFB DRIVER
P: Nicolas Ferre
M: nicolas.ferre@atmel.com
L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
ATMEL MACB ETHERNET DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
@ -1870,8 +1876,10 @@ T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
S: Maintained
IDE/ATAPI CDROM DRIVER
P: Borislav Petkov
M: bbpetkov@yahoo.de
L: linux-ide@vger.kernel.org
S: Unmaintained
S: Maintained
IDE/ATAPI FLOPPY DRIVERS
P: Paul Bristow
@ -1917,7 +1925,7 @@ INFINIBAND SUBSYSTEM
P: Roland Dreier
M: rolandd@cisco.com
P: Sean Hefty
M: mshefty@ichips.intel.com
M: sean.hefty@intel.com
P: Hal Rosenstock
M: hal.rosenstock@gmail.com
L: general@lists.openfabrics.org
@ -1982,29 +1990,27 @@ L: netdev@vger.kernel.org
S: Maintained
INTEL PRO/100 ETHERNET SUPPORT
P: John Ronciak
M: john.ronciak@intel.com
P: Auke Kok
M: auke-jan.h.kok@intel.com
P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
P: Jeff Kirsher
M: jeffrey.t.kirsher@intel.com
P: Auke Kok
M: auke-jan.h.kok@intel.com
P: John Ronciak
M: john.ronciak@intel.com
L: e1000-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/e1000/
S: Supported
INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
P: Jeb Cramer
M: cramerj@intel.com
P: John Ronciak
M: john.ronciak@intel.com
P: Auke Kok
M: auke-jan.h.kok@intel.com
P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
P: Jeff Kirsher
M: jeffrey.t.kirsher@intel.com
P: Auke Kok
M: auke-jan.h.kok@intel.com
P: John Ronciak
M: john.ronciak@intel.com
L: e1000-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/e1000/
S: Supported
@ -2029,7 +2035,7 @@ P: James Ketrenos
M: jketreno@linux.intel.com
L: linux-wireless@vger.kernel.org
L: ipw2100-devel@lists.sourceforge.net
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2100.sourceforge.net
S: Supported
@ -2040,7 +2046,7 @@ P: James Ketrenos
M: jketreno@linux.intel.com
L: linux-wireless@vger.kernel.org
L: ipw2100-devel@lists.sourceforge.net
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
S: Supported
@ -2597,7 +2603,7 @@ S: Maintained
MSI LAPTOP SUPPORT
P: Lennart Poettering
M: mzxreary@0pointer.de
L: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
@ -2739,8 +2745,8 @@ T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
NETXEN (1/10) GbE SUPPORT
P: Amit S. Kale
M: amitkale@netxen.com
P: Dhananjay Phadke
M: dhananjay@netxen.com
L: netdev@vger.kernel.org
W: http://www.netxen.com
S: Supported
@ -3611,8 +3617,10 @@ L: linux-kernel@vger.kernel.org ?
S: Supported
SPIDERNET NETWORK DRIVER for CELL
P: Linas Vepstas
M: linas@austin.ibm.com
P: Ishizaki Kou
M: kou.ishizaki@toshiba.co.jp
P: Jens Osterkamp
M: jens@de.ibm.com
L: netdev@vger.kernel.org
S: Supported
@ -4054,6 +4062,14 @@ L: user-mode-linux-user@lists.sourceforge.net
W: http://user-mode-linux.sourceforge.net
S: Maintained
USERSPACE I/O (UIO)
P: Hans J. Koch
M: hjk@linutronix.de
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
S: Maintained
FAT/VFAT/MSDOS FILESYSTEM:
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 24
EXTRAVERSION = -rc6
EXTRAVERSION = -rc8
NAME = Arr Matey! A Hairy Bilge Rat!
# *DOCUMENTATION*
@ -12,7 +12,7 @@ NAME = Arr Matey! A Hairy Bilge Rat!
# Do not:
# o use make's built-in rules and variables
# (this increases performance and avoid hard-to-debug behavour);
# (this increases performance and avoids hard-to-debug behaviour);
# o print "Entering directory ...";
MAKEFLAGS += -rR --no-print-directory
@ -1329,7 +1329,7 @@ else
ALLINCLUDE_ARCHS := $(SRCARCH)
endif
else
#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif

2
arch/.gitignore vendored Normal file
View File

@ -0,0 +1,2 @@
i386
x86_64

View File

@ -225,7 +225,7 @@ alpha_fp_emul (unsigned long pc)
FP_UNPACK_SP(SB, &vb);
DR_c = DB_c;
DR_s = DB_s;
DR_e = DB_e;
DR_e = DB_e + (1024 - 128);
DR_f = SB_f << (52 - 23);
goto pack_d;
}

View File

@ -1072,11 +1072,13 @@ source "drivers/rtc/Kconfig"
source "drivers/dma/Kconfig"
source "drivers/dca/Kconfig"
endmenu
source "fs/Kconfig"
source "kernel/Kconfig.instrumentation"
source "arch/arm/Kconfig.instrumentation"
source "arch/arm/Kconfig.debug"

View File

@ -0,0 +1,52 @@
menuconfig INSTRUMENTATION
bool "Instrumentation Support"
default y
---help---
Say Y here to get to see options related to performance measurement,
system-wide debugging, and testing. This option alone does not add any
kernel code.
If you say N, all options in this submenu will be skipped and
disabled. If you're trying to debug the kernel itself, go see the
Kernel Hacking menu.
if INSTRUMENTATION
config PROFILING
bool "Profiling support (EXPERIMENTAL)"
help
Say Y here to enable the extended profiling support mechanisms used
by profilers such as OProfile.
config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
depends on PROFILING && !UML
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
and applications.
If unsure, say N.
config OPROFILE_ARMV6
bool
depends on OPROFILE && CPU_V6 && !SMP
default y
select OPROFILE_ARM11_CORE
config OPROFILE_MPCORE
bool
depends on OPROFILE && CPU_V6 && SMP
default y
select OPROFILE_ARM11_CORE
config OPROFILE_ARM11_CORE
bool
config MARKERS
bool "Activate markers"
help
Place an empty function call at each marker site. Can be
dynamically changed for a probe function.
endif # INSTRUMENTATION

View File

@ -109,6 +109,15 @@ static struct spi_board_info ek_spi_devices[] = {
#endif
};
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("ics1523", 0x26),
},
{
I2C_BOARD_INFO("dac3550", 0x4d),
}
};
#define EK_FLASH_BASE AT91_CHIPSELECT_0
#define EK_FLASH_SIZE 0x200000

View File

@ -40,31 +40,29 @@ static int fsample_keymap[] = {
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
KEY(0,4,KEY_CENTER),
KEY(0,5,KEY_0_5),
KEY(1,0,KEY_SOFT2),
KEY(0,4,KEY_ENTER),
KEY(1,0,KEY_F10),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
KEY(2,0,KEY_SOFT1),
KEY(2,0,KEY_F9),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
KEY(2,4,KEY_SHARP),
KEY(2,5,KEY_2_5),
KEY(2,4,KEY_KPDOT),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
KEY(3,5,KEY_HEADSETHOOK),
KEY(3,5,KEY_KPSLASH),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
KEY(4,4,KEY_STAR),
KEY(4,4,KEY_KPASTERISK),
KEY(4,5,KEY_POWER),
0
};

View File

@ -36,8 +36,6 @@
#include <asm/arch/omapfb.h>
#include <asm/arch/lcd_mipid.h>
#include "../plat-omap/dsp/dsp_common.h"
#define ADS7846_PENDOWN_GPIO 15
static void __init omap_nokia770_init_irq(void)
@ -318,6 +316,8 @@ static __init int omap_dsp_init(void)
out:
return ret;
}
#else
#define omap_dsp_init() do {} while (0)
#endif /* CONFIG_OMAP_DSP */
static void __init omap_nokia770_init(void)

View File

@ -39,31 +39,29 @@ static int p2_keymap[] = {
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
KEY(0,4,KEY_CENTER),
KEY(0,5,KEY_0_5),
KEY(1,0,KEY_SOFT2),
KEY(0,4,KEY_ENTER),
KEY(1,0,KEY_F10),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
KEY(2,0,KEY_SOFT1),
KEY(2,0,KEY_F9),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
KEY(2,4,KEY_SHARP),
KEY(2,5,KEY_2_5),
KEY(2,4,KEY_KPDOT),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
KEY(3,5,KEY_HEADSETHOOK),
KEY(3,5,KEY_KPSLASH),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
KEY(4,4,KEY_STAR),
KEY(4,4,KEY_KPASTERISK),
KEY(4,5,KEY_POWER),
0
};

View File

@ -178,13 +178,19 @@ static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
SAVE(GAFR1_L); SAVE(GAFR1_U);
SAVE(GAFR2_L); SAVE(GAFR2_U);
SAVE(ICMR);
SAVE(ICMR); ICMR = 0;
SAVE(CKEN);
SAVE(PSTR);
/* Clear GPIO transition detect bits */
GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
}
static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
{
/* ensure not to come back here if it wasn't intended */
PSPR = 0;
/* restore registers */
RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
@ -195,7 +201,12 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
PSSR = PSSR_RDH | PSSR_PH;
RESTORE(CKEN);
ICLR = 0;
ICCR = 1;
RESTORE(ICMR);
RESTORE(PSTR);
}

View File

@ -43,11 +43,11 @@ pxa_cpu_save_cp:
pxa_cpu_save_sp:
@ preserve phys address of stack
mov r0, sp
mov r2, lr
str lr, [sp, #-4]!
bl sleep_phys_sp
ldr r1, =sleep_save_sp
str r0, [r1]
mov pc, r2
ldr pc, [sp], #4
/*
* pxa27x_cpu_suspend()
@ -270,5 +270,3 @@ resume_after_mmu:
mar acc0, r2, r3
#endif
ldmfd sp!, {r4 - r12, pc} @ return to caller

View File

@ -361,10 +361,12 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
* OP_SCALAR - this operation always operates in scalar mode
* OP_SD - the instruction exceptionally writes to a single precision result.
* OP_DD - the instruction exceptionally writes to a double precision result.
* OP_SM - the instruction exceptionally reads from a single precision operand.
*/
#define OP_SCALAR (1 << 0)
#define OP_SD (1 << 1)
#define OP_DD (1 << 1)
#define OP_SM (1 << 2)
struct op {
u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);

View File

@ -668,8 +668,8 @@ static struct op fops_ext[32] = {
[FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_double_fcmpz, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_double_fcmpez, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FCVT)] = { vfp_double_fcvts, OP_SCALAR|OP_SD },
[FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR|OP_SM },
[FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR|OP_SM },
[FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_double_ftoui, OP_SCALAR|OP_SD },
[FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_double_ftouiz, OP_SCALAR|OP_SD },
[FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_double_ftosi, OP_SCALAR|OP_SD },
@ -1128,7 +1128,7 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
u32 exceptions = 0;
unsigned int dest;
unsigned int dn = vfp_get_dn(inst);
unsigned int dm = vfp_get_dm(inst);
unsigned int dm;
unsigned int vecitr, veclen, vecstride;
struct op *fop;
@ -1145,6 +1145,14 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
else
dest = vfp_get_dd(inst);
/*
* f[us]ito takes a sN operand, not a dN operand.
*/
if (fop->flags & OP_SM)
dm = vfp_get_sm(inst);
else
dm = vfp_get_dm(inst);
/*
* If destination bank is zero, vector length is always '1'.
* ARM DDI0100F C5.1.3, C5.3.2.

View File

@ -65,6 +65,10 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
config HARDWARE_PM
def_bool y
depends on OPROFILE
source "init/Kconfig"
source "kernel/Kconfig.preempt"

View File

@ -6,136 +6,9 @@
*!
*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
*!
*! $Log: ds1302.c,v $
*! Revision 1.18 2005/01/24 09:11:26 mikaelam
*! Minor changes to get DS1302 RTC chip driver to work
*!
*! Revision 1.17 2005/01/05 06:11:22 starvik
*! No need to do local_irq_disable after local_irq_save.
*!
*! Revision 1.16 2004/12/13 12:21:52 starvik
*! Added I/O and DMA allocators from Linux 2.4
*!
*! Revision 1.14 2004/08/24 06:48:43 starvik
*! Whitespace cleanup
*!
*! Revision 1.13 2004/05/28 09:26:59 starvik
*! Modified I2C initialization to work in 2.6.
*!
*! Revision 1.12 2004/05/14 07:58:03 starvik
*! Merge of changes from 2.4
*!
*! Revision 1.10 2004/02/04 09:25:12 starvik
*! Merge of Linux 2.6.2
*!
*! Revision 1.9 2003/07/04 08:27:37 starvik
*! Merge of Linux 2.5.74
*!
*! Revision 1.8 2003/04/09 05:20:47 starvik
*! Merge of Linux 2.5.67
*!
*! Revision 1.6 2003/01/09 14:42:51 starvik
*! Merge of Linux 2.5.55
*!
*! Revision 1.4 2002/12/11 13:13:57 starvik
*! Added arch/ to v10 specific includes
*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
*!
*! Revision 1.3 2002/11/20 11:56:10 starvik
*! Merge of Linux 2.5.48
*!
*! Revision 1.2 2002/11/18 13:16:06 starvik
*! Linux 2.5 port of latest 2.4 drivers
*!
*! Revision 1.15 2002/10/11 16:14:33 johana
*! Added CONFIG_ETRAX_DS1302_TRICKLE_CHARGE and initial setting of the
*! trcklecharge register.
*!
*! Revision 1.14 2002/10/10 12:15:38 magnusmn
*! Added support for having the RST signal on bit g0
*!
*! Revision 1.13 2002/05/29 15:16:08 johana
*! Removed unused variables.
*!
*! Revision 1.12 2002/04/10 15:35:25 johana
*! Moved probe function closer to init function and marked it __init.
*!
*! Revision 1.11 2001/06/14 12:35:52 jonashg
*! The ATA hack is back. It is unfortunately the only way to set g27 to output.
*!
*! Revision 1.9 2001/06/14 10:00:14 jonashg
*! No need for tempudelay to be inline anymore (had to adjust the usec to
*! loops conversion because of this to make it slow enough to be a udelay).
*!
*! Revision 1.8 2001/06/14 08:06:32 jonashg
*! Made tempudelay delay usecs (well, just a tad more).
*!
*! Revision 1.7 2001/06/13 14:18:11 jonashg
*! Only allow processes with SYS_TIME capability to set time and charge.
*!
*! Revision 1.6 2001/06/12 15:22:07 jonashg
*! * Made init function __init.
*! * Parameter to out_byte() is unsigned char.
*! * The magic number 42 has got a name.
*! * Removed comment about /proc (nothing is exported there).
*!
*! Revision 1.5 2001/06/12 14:35:13 jonashg
*! Gave the module a name and added it to printk's.
*!
*! Revision 1.4 2001/05/31 14:53:40 jonashg
*! Made tempudelay() inline so that the watchdog doesn't reset (see
*! function comment).
*!
*! Revision 1.3 2001/03/26 16:03:06 bjornw
*! Needs linux/config.h
*!
*! Revision 1.2 2001/03/20 19:42:00 bjornw
*! Use the ETRAX prefix on the DS1302 options
*!
*! Revision 1.1 2001/03/20 09:13:50 magnusmn
*! Linux 2.4 port
*!
*! Revision 1.10 2000/07/05 15:38:23 bjornw
*! Dont update kernel time when a RTC_SET_TIME is done
*!
*! Revision 1.9 2000/03/02 15:42:59 macce
*! * Hack to make RTC work on all 2100/2400
*!
*! Revision 1.8 2000/02/23 16:59:18 torbjore
*! added setup of R_GEN_CONFIG when RTC is connected to the generic port.
*!
*! Revision 1.7 2000/01/17 15:51:43 johana
*! Added RTC_SET_CHARGE ioctl to enable trickle charger.
*!
*! Revision 1.6 1999/10/27 13:19:47 bjornw
*! Added update_xtime_from_cmos which reads back the updated RTC into the kernel.
*! /dev/rtc calls it now.
*!
*! Revision 1.5 1999/10/27 12:39:37 bjornw
*! Disabled superuser check. Anyone can now set the time.
*!
*! Revision 1.4 1999/09/02 13:27:46 pkj
*! Added shadow for R_PORT_PB_CONFIG.
*! Renamed port_g_shadow to port_g_data_shadow.
*!
*! Revision 1.3 1999/09/02 08:28:06 pkj
*! Made it possible to select either port PB or the generic port for the RST
*! signal line to the DS1302 RTC.
*! Also make sure the RST bit is configured as output on Port PB (if used).
*!
*! Revision 1.2 1999/09/01 14:47:20 bjornw
*! Added support for /dev/rtc operations with ioctl RD_TIME and SET_TIME to read
*! and set the date. Register as major 121.
*!
*! Revision 1.1 1999/09/01 09:45:29 bjornw
*! Implemented a DS1302 RTC driver.
*!
*!
*! ---------------------------------------------------------------------------
*!
*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN
*!
*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
*!
*!***************************************************************************/
@ -156,6 +29,8 @@
#include <asm/rtc.h>
#include <asm/arch/io_interface_mux.h>
#include "i2c.h"
#define RTC_MAJOR_NR 121 /* local major, change later */
static const char ds1302_name[] = "ds1302";

View File

@ -392,6 +392,7 @@ int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id
if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != interfaces[ioif].gpio_g_in) ||
((interfaces[ioif].gpio_g_out & gpio_out_pins) != interfaces[ioif].gpio_g_out) ||
((interfaces[ioif].gpio_b & gpio_pb_pins) != interfaces[ioif].gpio_b)) {
local_irq_restore(flags);
printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %u\n",
ioif);
return -EBUSY;

View File

@ -7,7 +7,7 @@
*
* Ideas also taken from arch/arm.
*
* Copyright (C) 2000, 2001 Axis Communications AB
* Copyright (C) 2000-2007 Axis Communications AB
*
* Authors: Bjorn Wesen (bjornw@axis.com)
*
@ -40,84 +40,30 @@
*/
#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2;
int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
void do_signal(int canrestart, struct pt_regs *regs);
/*
* Atomically swap in the new signal mask, and wait for a signal. Define
* Atomically swap in the new signal mask, and wait for a signal. Define
* dummy arguments to be able to reach the regs argument. (Note that this
* arrangement relies on old_sigset_t occupying one register.)
*/
int
sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
long srp, struct pt_regs *regs)
int sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
long srp, struct pt_regs *regs)
{
sigset_t saveset;
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
saveset = current->blocked;
current->saved_sigmask = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs->r10 = -EINTR;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
if (do_signal(0, &saveset, regs))
/* We will get here twice: once to call the signal
handler, then again to return from the
sigsuspend system call. When calling the
signal handler, R10 holds the signal number as
set through do_signal. The sigsuspend call
will return with the restored value set above;
always -EINTR. */
return regs->r10;
}
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
return -ERESTARTNOHAND;
}
/* Define dummy arguments to be able to reach the regs argument. (Note that
* this arrangement relies on size_t occupying one register.)
*/
int
sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
long mof, long srp, struct pt_regs *regs)
{
sigset_t saveset, newset;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&newset, unewset, sizeof(newset)))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
saveset = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs->r10 = -EINTR;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
if (do_signal(0, &saveset, regs))
/* We will get here twice: once to call the signal
handler, then again to return from the
sigsuspend system call. When calling the
signal handler, R10 holds the signal number as
set through do_signal. The sigsuspend call
will return with the restored value set above;
always -EINTR. */
return regs->r10;
}
}
int
sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction *oact)
int sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
@ -147,8 +93,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
return ret;
}
int
sys_sigaltstack(const stack_t *uss, stack_t __user *uoss)
int sys_sigaltstack(const stack_t *uss, stack_t __user *uoss)
{
return do_sigaltstack(uss, uoss, rdusp());
}
@ -205,7 +150,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
/* TODO: the other ports use regs->orig_XX to disable syscall checks
* after this completes, but we don't use that mechanism. maybe we can
* use it now ?
* use it now ?
*/
return err;
@ -216,7 +161,7 @@ badframe:
/* Define dummy arguments to be able to reach the regs argument. */
asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
long srp, struct pt_regs *regs)
{
struct sigframe __user *frame = (struct sigframe *)rdusp();
@ -243,7 +188,7 @@ asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->sc))
goto badframe;
@ -254,11 +199,11 @@ asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
badframe:
force_sig(SIGSEGV, current);
return 0;
}
}
/* Define dummy arguments to be able to reach the regs argument. */
asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
long mof, long srp, struct pt_regs *regs)
{
struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp();
@ -282,7 +227,7 @@ asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
@ -294,14 +239,14 @@ asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
badframe:
force_sig(SIGSEGV, current);
return 0;
}
}
/*
* Set up a signal frame.
*/
static int
setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask)
static int setup_sigcontext(struct sigcontext __user *sc,
struct pt_regs *regs, unsigned long mask)
{
int err = 0;
unsigned long usp = rdusp();
@ -324,10 +269,11 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned lo
return err;
}
/* figure out where we want to put the new signal frame - usually on the stack */
/* Figure out where we want to put the new signal frame
* - usually on the stack. */
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
unsigned long sp = rdusp();
@ -345,15 +291,15 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
}
/* grab and setup a signal frame.
*
*
* basically we stack a lot of state info, and arrange for the
* user-mode program to return to the kernel using either a
* trampoline which performs the syscall sigreturn, or a provided
* user-mode trampoline.
*/
static void setup_frame(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs * regs)
static int setup_frame(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs *regs)
{
struct sigframe __user *frame;
unsigned long return_ip;
@ -401,14 +347,15 @@ static void setup_frame(int sig, struct k_sigaction *ka,
wrusp((unsigned long)frame);
return;
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs)
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long return_ip;
@ -443,9 +390,10 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
/* trampoline - the desired return ip is the retcode itself */
return_ip = (unsigned long)&frame->retcode;
/* This is movu.w __NR_rt_sigreturn, r9; break 13; */
err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
err |= __put_user(__NR_rt_sigreturn, (short __user*)(frame->retcode+2));
err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
err |= __put_user(0x9c5f, (short __user *)(frame->retcode+0));
err |= __put_user(__NR_rt_sigreturn,
(short __user *)(frame->retcode+2));
err |= __put_user(0xe93d, (short __user *)(frame->retcode+4));
}
if (err)
@ -455,73 +403,81 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
/* Set up registers for signal handler */
regs->irp = (unsigned long) ka->sa.sa_handler; /* what we enter NOW */
regs->srp = return_ip; /* what we enter LATER */
regs->r10 = sig; /* first argument is signo */
regs->r11 = (unsigned long) &frame->info; /* second argument is (siginfo_t *) */
regs->r12 = 0; /* third argument is unused */
/* actually move the usp to reflect the stacked frame */
/* What we enter NOW */
regs->irp = (unsigned long) ka->sa.sa_handler;
/* What we enter LATER */
regs->srp = return_ip;
/* First argument is signo */
regs->r10 = sig;
/* Second argument is (siginfo_t *) */
regs->r11 = (unsigned long)&frame->info;
/* Third argument is unused */
regs->r12 = 0;
/* Actually move the usp to reflect the stacked frame */
wrusp((unsigned long)frame);
return;
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
/*
* OK, we're invoking a handler
*/
*/
static inline void
handle_signal(int canrestart, unsigned long sig,
siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs * regs)
static inline int handle_signal(int canrestart, unsigned long sig,
siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
{
int ret;
/* Are we from a system call? */
if (canrestart) {
/* If so, check system call restarting.. */
switch (regs->r10) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
/* ERESTARTNOHAND means that the syscall should only be
restarted if there was no handler for the signal, and since
we only get here if there is a handler, we don't restart */
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
/* ERESTARTNOHAND means that the syscall should
* only be restarted if there was no handler for
* the signal, and since we only get here if there
* is a handler, we don't restart */
regs->r10 = -EINTR;
break;
case -ERESTARTSYS:
/* ERESTARTSYS means to restart the syscall if
* there is no handler or the handler was
* registered with SA_RESTART */
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->r10 = -EINTR;
break;
case -ERESTARTSYS:
/* ERESTARTSYS means to restart the syscall if there is no
handler or the handler was registered with SA_RESTART */
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->r10 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
/* ERESTARTNOINTR means that the syscall should be called again
after the signal handler returns. */
RESTART_CRIS_SYS(regs);
}
/* fallthrough */
case -ERESTARTNOINTR:
/* ERESTARTNOINTR means that the syscall should
* be called again after the signal handler returns. */
RESTART_CRIS_SYS(regs);
}
}
/* Set up the stack frame */
if (ka->sa.sa_flags & SA_SIGINFO)
setup_rt_frame(sig, ka, info, oldset, regs);
ret = setup_rt_frame(sig, ka, info, oldset, regs);
else
setup_frame(sig, ka, oldset, regs);
ret = setup_frame(sig, ka, oldset, regs);
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (ret == 0) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked,
&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
return ret;
}
/*
@ -536,11 +492,12 @@ handle_signal(int canrestart, unsigned long sig,
* mode below.
*/
int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
void do_signal(int canrestart, struct pt_regs *regs)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
sigset_t *oldset;
/*
* We want the common case to go fast, which
@ -549,16 +506,26 @@ int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
* if so.
*/
if (!user_mode(regs))
return 1;
return;
if (!oldset)
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
handle_signal(canrestart, signr, &info, &ka, oldset, regs);
return 1;
if (handle_signal(canrestart, signr, &info, &ka,
oldset, regs)) {
/* a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag */
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
/* Did we come from a system call? */
@ -569,10 +536,16 @@ int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
regs->r10 == -ERESTARTNOINTR) {
RESTART_CRIS_SYS(regs);
}
if (regs->r10 == -ERESTART_RESTARTBLOCK){
if (regs->r10 == -ERESTART_RESTARTBLOCK) {
regs->r10 = __NR_restart_syscall;
regs->irp -= 2;
}
}
return 0;
/* if there's no signal to deliver, we just put the saved sigmask
* back */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}

View File

@ -13,6 +13,7 @@
#include <linux/swap.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/vmstat.h>
#include <asm/arch/svinto.h>
#include <asm/types.h>
#include <asm/signal.h>

View File

@ -9,7 +9,8 @@
*/
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
jiffies = jiffies_64;
SECTIONS
{
@ -23,7 +24,7 @@ SECTIONS
_stext = .;
__stext = .;
.text : {
*(.text)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*(.fixup)
@ -49,10 +50,10 @@ SECTIONS
__edata = . ; /* End of data section */
_edata = . ;
. = ALIGN(8192); /* init_task and stack, must be aligned */
. = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned */
.data.init_task : { *(.data.init_task) }
. = ALIGN(8192); /* Init code and data */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
@ -66,13 +67,7 @@ SECTIONS
__setup_end = .;
.initcall.init : {
__initcall_start = .;
*(.initcall1.init);
*(.initcall2.init);
*(.initcall3.init);
*(.initcall4.init);
*(.initcall5.init);
*(.initcall6.init);
*(.initcall7.init);
INITCALLS
__initcall_end = .;
}
@ -88,16 +83,18 @@ SECTIONS
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
/* We fill to the next page, so we can discard all init
pages without needing to consider what payload might be
appended to the kernel image. */
FILL (0);
. = ALIGN (8192);
}
#endif
__vmlinux_end = .; /* last address of the physical file */
__init_end = .;
/*
* We fill to the next page, so we can discard all init
* pages without needing to consider what payload might be
* appended to the kernel image.
*/
. = ALIGN(PAGE_SIZE);
__init_end = .;
__data_end = . ; /* Move to _edata ? */
__bss_start = .; /* BSS */

View File

@ -1488,16 +1488,19 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
case LDFA_OP:
case LDFCCLR_OP:
case LDFCNC_OP:
case LDF_IMM_OP:
case LDFA_IMM_OP:
case LDFCCLR_IMM_OP:
case LDFCNC_IMM_OP:
if (u.insn.x)
ret = emulate_load_floatpair(ifa, u.insn, regs);
else
ret = emulate_load_float(ifa, u.insn, regs);
break;
case LDF_IMM_OP:
case LDFA_IMM_OP:
case LDFCCLR_IMM_OP:
case LDFCNC_IMM_OP:
ret = emulate_load_float(ifa, u.insn, regs);
break;
case STF_OP:
case STF_IMM_OP:
ret = emulate_store_float(ifa, u.insn, regs);

View File

@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) 2004-2007 Silicon Graphics, Inc. All Rights Reserved.
*/
@ -14,6 +14,11 @@
* PIO read fails, the MCA handler will force the error to look
* corrected and vector to the xp_error_PIOR which will return an error.
*
* The definition of "consumption" and the time it takes for an MCA
* to surface is processor implementation specific. This code
* is sufficient on Itanium through the Montvale processor family.
* It may need to be adjusted for future processor implementations.
*
* extern int xp_nofault_PIOR(void *remote_register);
*/
@ -22,11 +27,10 @@ xp_nofault_PIOR:
mov r8=r0 // Stage a success return value
ld8.acq r9=[r32];; // PIO Read the specified register
adds r9=1,r9;; // Add to force consumption
or r9=r9,r9;; // Or to force consumption
srlz.i;; // Allow time for MCA to surface
br.ret.sptk.many b0;; // Return success
.global xp_error_PIOR
xp_error_PIOR:
mov r8=1 // Return value of 1
br.ret.sptk.many b0;; // Return failure

View File

@ -59,6 +59,8 @@ config BCM47XX
select SYS_SUPPORTS_LITTLE_ENDIAN
select SSB
select SSB_DRIVER_MIPS
select SSB_DRIVER_EXTIF
select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
select CFE
@ -992,8 +994,6 @@ config BOOT_ELF64
menu "CPU selection"
source "kernel/time/Kconfig"
choice
prompt "CPU type"
default CPU_R4X00
@ -1768,6 +1768,8 @@ config NR_CPUS
performance should round up your number of processors to the next
power of two.
source "kernel/time/Kconfig"
#
# Timer Interrupt Frequency Configuration
#

View File

@ -1,8 +1,8 @@
/*
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 pci support.
* Alchemy/AMD Au1x00 PCI support.
*
* Copyright 2001,2002,2003 MontaVista Software Inc.
* Copyright 2001-2003, 2007 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
@ -66,6 +66,8 @@ static unsigned long virt_io_addr;
static int __init au1x_pci_setup(void)
{
extern void au1x_pci_cfg_init(void);
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
@ -94,6 +96,8 @@ static int __init au1x_pci_setup(void)
set_io_port_base(virt_io_addr);
#endif
au1x_pci_cfg_init();
register_pci_controller(&au1x_controller);
return 0;
}

View File

@ -4,10 +4,15 @@
#include <linux/io.h>
#include <linux/serial_reg.h>
#include <cobalt.h>
#define UART_BASE ((void __iomem *)CKSEG1ADDR(0x1c800000))
void prom_putchar(char c)
{
if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
return;
while (!(readb(UART_BASE + UART_LSR) & UART_LSR_THRE))
;

View File

@ -136,7 +136,8 @@ EXPORT(_stext)
* kernel load address. This is needed because this platform does
* not have a ELF loader yet.
*/
__INIT
FEXPORT(__kernel_entry)
j kernel_entry
#endif
__INIT_REFOK

View File

@ -269,7 +269,7 @@ static void __init bootmem_init(void)
static void __init bootmem_init(void)
{
unsigned long init_begin, reserved_end;
unsigned long reserved_end;
unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
int i;
@ -344,7 +344,6 @@ static void __init bootmem_init(void)
min_low_pfn, max_low_pfn);
init_begin = PFN_UP(__pa_symbol(&__init_begin));
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
@ -352,8 +351,8 @@ static void __init bootmem_init(void)
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
if (start <= init_begin)
start = init_begin;
if (start <= min_low_pfn)
start = min_low_pfn;
if (start >= end)
continue;

View File

@ -147,9 +147,9 @@ static __init int cpu_has_mfc0_count_bug(void)
return 1;
/*
* I don't have erratas for newer R4400 so be paranoid.
* we assume newer revisions are ok
*/
return 1;
return 0;
}
return 0;

View File

@ -12,11 +12,11 @@ endif
MKLASATIMG = mklasatimg
MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
KERNEL_IMAGE = $(TOPDIR)/vmlinux
KERNEL_IMAGE = vmlinux
KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
LDSCRIPT= -L$(obj) -Tromscript.normal
LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-D_kernel_entry=0x$(KERNEL_ENTRY) \
@ -24,7 +24,7 @@ HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-D TIMESTAMP=$(shell date +%s)
$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
$(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $<
$(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $<
OBJECTS = head.o kImage.o

View File

@ -169,7 +169,6 @@ void __init prom_meminit(void)
void __init prom_free_prom_memory(void)
{
#if 0 /* for now ... */
unsigned long addr;
int i;
@ -181,5 +180,4 @@ void __init prom_free_prom_memory(void)
free_init_pages("prom memory",
addr, addr + boot_mem_map.map[i].size);
}
#endif
}

View File

@ -39,16 +39,18 @@ static void atlas_machine_power_off(void);
static void mips_machine_restart(char *command)
{
unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
unsigned int __iomem *softres_reg =
ioremap(SOFTRES_REG, sizeof(unsigned int));
writew(GORESET, softres_reg);
__raw_writel(GORESET, softres_reg);
}
static void mips_machine_halt(void)
{
unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
unsigned int __iomem *softres_reg =
ioremap(SOFTRES_REG, sizeof(unsigned int));
writew(GORESET, softres_reg);
__raw_writel(GORESET, softres_reg);
}
#if defined(CONFIG_MIPS_ATLAS)

View File

@ -149,7 +149,7 @@ void __init plat_mem_setup(void)
/* Check PCI clock */
{
unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
int jmpr = (readw(jmpr_p) >> 2) & 0x07;
int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
static const int pciclocks[] __initdata = {
33, 20, 25, 30, 12, 16, 37, 10
};

View File

@ -45,7 +45,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
#ifdef CONFIG_ZONE_DMA32
#ifdef CONFIG_ZONE_DMA
if (dev == NULL)
gfp |= __GFP_DMA;
else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))

View File

@ -177,7 +177,7 @@ static char irq_tab_raq2[] __initdata = {
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
return irq_tab_qube1[slot];
if (cobalt_board_id == COBALT_BRD_ID_RAQ2)

View File

@ -1,8 +1,8 @@
/*
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 pci support.
* Alchemy/AMD Au1x00 PCI support.
*
* Copyright 2001,2002,2003 MontaVista Software Inc.
* Copyright 2001-2003, 2007 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
@ -69,10 +69,27 @@ void mod_wired_entry(int entry, unsigned long entrylo0,
write_c0_pagemask(old_pagemask);
}
struct vm_struct *pci_cfg_vm;
static struct vm_struct *pci_cfg_vm;
static int pci_cfg_wired_entry;
static int first_cfg = 1;
unsigned long last_entryLo0, last_entryLo1;
static unsigned long last_entryLo0, last_entryLo1;
/*
* We can't ioremap the entire pci config space because it's too large.
* Nor can we call ioremap dynamically because some device drivers use
* the PCI config routines from within interrupt handlers and that
* becomes a problem in get_vm_area(). We use one wired TLB to handle
* all config accesses for all busses.
*/
void __init au1x_pci_cfg_init(void)
{
/* Reserve a wired entry for PCI config accesses */
pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
if (!pci_cfg_vm)
panic(KERN_ERR "PCI unable to get vm area\n");
pci_cfg_wired_entry = read_c0_wired();
add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
last_entryLo0 = last_entryLo1 = 0xffffffff;
}
static int config_access(unsigned char access_type, struct pci_bus *bus,
unsigned int dev_fn, unsigned char where,
@ -97,27 +114,6 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
Au1500_PCI_STATCMD);
au_sync_udelay(1);
/*
* We can't ioremap the entire pci config space because it's
* too large. Nor can we call ioremap dynamically because some
* device drivers use the pci config routines from within
* interrupt handlers and that becomes a problem in get_vm_area().
* We use one wired tlb to handle all config accesses for all
* busses. To improve performance, if the current device
* is the same as the last device accessed, we don't touch the
* tlb.
*/
if (first_cfg) {
/* reserve a wired entry for pci config accesses */
first_cfg = 0;
pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
if (!pci_cfg_vm)
panic(KERN_ERR "PCI unable to get vm area\n");
pci_cfg_wired_entry = read_c0_wired();
add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
last_entryLo0 = last_entryLo1 = 0xffffffff;
}
/* Allow board vendors to implement their own off-chip idsel.
* If it doesn't succeed, may as well bail out at this point.
*/
@ -144,9 +140,12 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
/* page boundary */
cfg_base = cfg_base & PAGE_MASK;
/*
* To improve performance, if the current device is the same as
* the last device accessed, we don't touch the TLB.
*/
entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
(unsigned long)pci_cfg_vm->addr, PM_4K);

View File

@ -42,6 +42,10 @@ static int
mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 *val)
{
u32 control = mace->pci.control;
/* disable master aborts interrupts during config read */
mace->pci.control = control & ~MACEPCI_CONTROL_MAR_INT;
mace->pci.config_addr = mkaddr(bus, devfn, reg);
switch (size) {
case 1:
@ -54,6 +58,9 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
*val = mace->pci.config_data.l;
break;
}
/* ack possible master abort */
mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT;
mace->pci.control = control;
DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val);

View File

@ -119,6 +119,7 @@ static struct pci_controller mace_pci_controller = {
.iommu = 0,
.mem_offset = MACE_PCI_MEM_OFFSET,
.io_offset = 0,
.io_map_base = CKSEG1ADDR(MACEPCI_LOW_IO),
};
static int __init mace_init(void)
@ -135,7 +136,8 @@ static int __init mace_init(void)
BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
"MACE PCI error", NULL));
iomem_resource = mace_pci_mem_resource;
/* extend memory resources */
iomem_resource.end = mace_pci_mem_resource.end;
ioport_resource = mace_pci_io_resource;
register_pci_controller(&mace_pci_controller);

View File

@ -22,7 +22,6 @@
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
@ -41,11 +40,60 @@ static cycle_t hpt_read(void)
return read_c0_count2();
}
static struct clocksource pnx_clocksource = {
.name = "pnx8xxx",
.rating = 200,
.read = hpt_read,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void timer_ack(void)
{
write_c0_compare(cpj);
}
static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
/* clear MATCH, signal the event */
c->event_handler(c);
return IRQ_HANDLED;
}
static struct irqaction pnx8xxx_timer_irq = {
.handler = pnx8xxx_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "pnx8xxx_timer",
};
static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
{
/* Timer 2 clear interrupt */
write_c0_compare2(-1);
return IRQ_HANDLED;
}
static struct irqaction monotonic_irqaction = {
.handler = monotonic_interrupt,
.flags = IRQF_DISABLED,
.name = "Monotonic timer",
};
static int pnx8xxx_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
write_c0_compare(delta);
return 0;
}
static struct clock_event_device pnx8xxx_clockevent = {
.name = "pnx8xxx_clockevent",
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = pnx8xxx_set_next_event,
};
/*
* plat_time_init() - it does the following things:
*
@ -58,11 +106,34 @@ static void timer_ack(void)
__init void plat_time_init(void)
{
unsigned int configPR;
unsigned int n;
unsigned int m;
unsigned int p;
unsigned int pow2p;
clockevents_register_device(&pnx8xxx_clockevent);
clocksource_register(&pnx_clocksource);
setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
/* Timer 1 start */
configPR = read_c0_config7();
configPR &= ~0x00000008;
write_c0_config7(configPR);
/* Timer 2 start */
configPR = read_c0_config7();
configPR &= ~0x00000010;
write_c0_config7(configPR);
/* Timer 3 stop */
configPR = read_c0_config7();
configPR |= 0x00000020;
write_c0_config7(configPR);
/* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
/* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */
@ -87,42 +158,6 @@ __init void plat_time_init(void)
write_c0_count2(0);
write_c0_compare2(0xffffffff);
clocksource_mips.read = hpt_read;
mips_timer_ack = timer_ack;
}
static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
{
/* Timer 2 clear interrupt */
write_c0_compare2(-1);
return IRQ_HANDLED;
}
static struct irqaction monotonic_irqaction = {
.handler = monotonic_interrupt,
.flags = IRQF_DISABLED,
.name = "Monotonic timer",
};
void __init plat_timer_setup(struct irqaction *irq)
{
int configPR;
setup_irq(PNX8550_INT_TIMER1, irq);
setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
/* Timer 1 start */
configPR = read_c0_config7();
configPR &= ~0x00000008;
write_c0_config7(configPR);
/* Timer 2 start */
configPR = read_c0_config7();
configPR &= ~0x00000010;
write_c0_config7(configPR);
/* Timer 3 stop */
configPR = read_c0_config7();
configPR |= 0x00000020;
write_c0_config7(configPR);
}

View File

@ -426,7 +426,6 @@ static void ip32_irq0(void)
crime_int = crime->istat & crime_mask;
irq = MACE_VID_IN1_IRQ + __ffs(crime_int);
crime_int = 1 << irq;
if (crime_int & CRIME_MACEISA_INT_MASK) {
unsigned long mace_int = mace->perif.ctrl.istat;

View File

@ -13,21 +13,22 @@
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
/*
* .iobase isn't a constant (in the sense of C) so we fill it in at runtime.
*/
#define MACE_PORT(int) \
#define MACEISA_SERIAL1_OFFS offsetof(struct sgi_mace, isa.serial1)
#define MACEISA_SERIAL2_OFFS offsetof(struct sgi_mace, isa.serial2)
#define MACE_PORT(offset,_irq) \
{ \
.irq = int, \
.mapbase = MACE_BASE + offset, \
.irq = _irq, \
.uartclk = 1843200, \
.iotype = UPIO_MEM, \
.flags = UPF_SKIP_TEST, \
.flags = UPF_SKIP_TEST|UPF_IOREMAP, \
.regshift = 8, \
}
static struct plat_serial8250_port uart8250_data[] = {
MACE_PORT(MACEISA_SERIAL1_IRQ),
MACE_PORT(MACEISA_SERIAL2_IRQ),
MACE_PORT(MACEISA_SERIAL1_OFFS, MACEISA_SERIAL1_IRQ),
MACE_PORT(MACEISA_SERIAL2_OFFS, MACEISA_SERIAL2_IRQ),
{ },
};
@ -41,9 +42,6 @@ static struct platform_device uart8250_device = {
static int __init uart8250_init(void)
{
uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
uart8250_data[1].membase = (void __iomem *) &mace->isa.serial2;
return platform_device_register(&uart8250_device);
}

View File

@ -598,8 +598,8 @@ static int __init rbtx4938_ethaddr_init(void)
printk(KERN_WARNING "seeprom: bad checksum.\n");
}
for (i = 0; i < 2; i++) {
unsigned int slot = TX4938_PCIC_IDSEL_AD_TO_SLOT(31 - i);
unsigned int id = (1 << 8) | PCI_DEVFN(slot, 0); /* bus 1 */
unsigned int id =
TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
struct platform_device *pdev;
if (!(tx4938_ccfgptr->pcfg &
(i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))

View File

@ -2,7 +2,7 @@
* This file adds the header file glue so that the shared files
* flatdevicetree.[ch] can compile and work in the powerpc bootwrapper.
*
* strncmp & strchr copied from <file:lib/strings.c>
* strncmp & strchr copied from <file:lib/string.c>
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Maintained by: Mark A. Greer <mgreer@mvista.com>

View File

@ -278,6 +278,7 @@ int iommu_map_sg(struct iommu_table *tbl, struct scatterlist *sglist,
unsigned long flags;
struct scatterlist *s, *outs, *segstart;
int outcount, incount, i;
unsigned int align;
unsigned long handle;
BUG_ON(direction == DMA_NONE);
@ -309,7 +310,12 @@ int iommu_map_sg(struct iommu_table *tbl, struct scatterlist *sglist,
/* Allocate iommu entries for that segment */
vaddr = (unsigned long) sg_virt(s);
npages = iommu_num_pages(vaddr, slen);
entry = iommu_range_alloc(tbl, npages, &handle, mask >> IOMMU_PAGE_SHIFT, 0);
align = 0;
if (IOMMU_PAGE_SHIFT < PAGE_SHIFT && slen >= PAGE_SIZE &&
(vaddr & ~PAGE_MASK) == 0)
align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
entry = iommu_range_alloc(tbl, npages, &handle,
mask >> IOMMU_PAGE_SHIFT, align);
DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen);
@ -570,7 +576,7 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
{
dma_addr_t dma_handle = DMA_ERROR_CODE;
unsigned long uaddr;
unsigned int npages;
unsigned int npages, align;
BUG_ON(direction == DMA_NONE);
@ -578,8 +584,13 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
npages = iommu_num_pages(uaddr, size);
if (tbl) {
align = 0;
if (IOMMU_PAGE_SHIFT < PAGE_SHIFT && size >= PAGE_SIZE &&
((unsigned long)vaddr & ~PAGE_MASK) == 0)
align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
dma_handle = iommu_alloc(tbl, vaddr, npages, direction,
mask >> IOMMU_PAGE_SHIFT, 0);
mask >> IOMMU_PAGE_SHIFT, align);
if (dma_handle == DMA_ERROR_CODE) {
if (printk_ratelimit()) {
printk(KERN_INFO "iommu_alloc failed, "

View File

@ -2216,6 +2216,45 @@ static void __init fixup_device_tree_efika(void)
prom_printf("fixup_device_tree_efika: ",
"skipped entry %x - setprop error\n", i);
}
/* Make sure ethernet mdio bus node exists */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio"));
if (!PHANDLE_VALID(node)) {
prom_printf("Adding Ethernet MDIO node\n");
call_prom("interpret", 1, 1,
" s\" /builtin\" find-device"
" new-device"
" 1 encode-int s\" #address-cells\" property"
" 0 encode-int s\" #size-cells\" property"
" s\" mdio\" 2dup device-name device-type"
" s\" mpc5200b-fec-phy\" encode-string"
" s\" compatible\" property"
" 0xf0003000 0x400 reg"
" 0x2 encode-int"
" 0x5 encode-int encode+"
" 0x3 encode-int encode+"
" s\" interrupts\" property"
" finish-device");
};
/* Make sure ethernet phy device node exist */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio/ethernet-phy"));
if (!PHANDLE_VALID(node)) {
prom_printf("Adding Ethernet PHY node\n");
call_prom("interpret", 1, 1,
" s\" /builtin/mdio\" find-device"
" new-device"
" s\" ethernet-phy\" device-name"
" 0x10 encode-int s\" reg\" property"
" my-self"
" ihandle>phandle"
" finish-device"
" s\" /builtin/ethernet\" find-device"
" encode-int"
" s\" phy-handle\" property"
" device-end");
}
}
#else
#define fixup_device_tree_efika()

View File

@ -295,6 +295,8 @@ void slb_initialize(void)
create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
slb_shadow_clear(2);
/* We don't bolt the stack for the time being - we're in boot,
* so the stack is in the bolted segment. By the time it goes
* elsewhere, we'll call _switch() which will bolt in the new

View File

@ -88,3 +88,8 @@ config CBE_CPUFREQ_PMI
but also at lower core voltage.
endmenu
config OPROFILE_CELL
def_bool y
depends on PPC_CELL_NATIVE && (OPROFILE = m || OPROFILE = y)

View File

@ -19,6 +19,7 @@ spu-manage-$(CONFIG_PPC_CELLEB) += spu_manage.o
spu-manage-$(CONFIG_PPC_CELL_NATIVE) += spu_manage.o
obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \
spu_notify.o \
spu_syscalls.o spu_fault.o \
$(spu-priv1-y) \
$(spu-manage-y) \

View File

@ -0,0 +1,67 @@
/*
* Move OProfile dependencies from spufs module to the kernel so it
* can run on non-cell PPC.
*
* Copyright (C) IBM 2005
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#undef DEBUG
#include <linux/module.h>
#include <asm/spu.h>
#include "spufs/spufs.h"
static BLOCKING_NOTIFIER_HEAD(spu_switch_notifier);
void spu_switch_notify(struct spu *spu, struct spu_context *ctx)
{
blocking_notifier_call_chain(&spu_switch_notifier,
ctx ? ctx->object_id : 0, spu);
}
EXPORT_SYMBOL_GPL(spu_switch_notify);
int spu_switch_event_register(struct notifier_block *n)
{
int ret;
ret = blocking_notifier_chain_register(&spu_switch_notifier, n);
if (!ret)
notify_spus_active();
return ret;
}
EXPORT_SYMBOL_GPL(spu_switch_event_register);
int spu_switch_event_unregister(struct notifier_block *n)
{
return blocking_notifier_chain_unregister(&spu_switch_notifier, n);
}
EXPORT_SYMBOL_GPL(spu_switch_event_unregister);
void spu_set_profile_private_kref(struct spu_context *ctx,
struct kref *prof_info_kref,
void (* prof_info_release) (struct kref *kref))
{
ctx->prof_priv_kref = prof_info_kref;
ctx->prof_priv_release = prof_info_release;
}
EXPORT_SYMBOL_GPL(spu_set_profile_private_kref);
void *spu_get_profile_private_kref(struct spu_context *ctx)
{
return ctx->prof_priv_kref;
}
EXPORT_SYMBOL_GPL(spu_get_profile_private_kref);

View File

@ -145,6 +145,20 @@ int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset)
return ret;
}
void notify_spus_active(void)
{
struct spufs_calls *calls;
calls = spufs_calls_get();
if (!calls)
return;
calls->notify_spus_active();
spufs_calls_put(calls);
return;
}
int register_spu_syscalls(struct spufs_calls *calls)
{
if (spufs_calls)

View File

@ -177,19 +177,3 @@ void spu_release_saved(struct spu_context *ctx)
spu_release(ctx);
}
void spu_set_profile_private_kref(struct spu_context *ctx,
struct kref *prof_info_kref,
void ( * prof_info_release) (struct kref *kref))
{
ctx->prof_priv_kref = prof_info_kref;
ctx->prof_priv_release = prof_info_release;
}
EXPORT_SYMBOL_GPL(spu_set_profile_private_kref);
void *spu_get_profile_private_kref(struct spu_context *ctx)
{
return ctx->prof_priv_kref;
}
EXPORT_SYMBOL_GPL(spu_get_profile_private_kref);

View File

@ -182,15 +182,7 @@ static int node_allowed(struct spu_context *ctx, int node)
return rval;
}
static BLOCKING_NOTIFIER_HEAD(spu_switch_notifier);
void spu_switch_notify(struct spu *spu, struct spu_context *ctx)
{
blocking_notifier_call_chain(&spu_switch_notifier,
ctx ? ctx->object_id : 0, spu);
}
static void notify_spus_active(void)
void do_notify_spus_active(void)
{
int node;
@ -217,22 +209,6 @@ static void notify_spus_active(void)
}
}
int spu_switch_event_register(struct notifier_block * n)
{
int ret;
ret = blocking_notifier_chain_register(&spu_switch_notifier, n);
if (!ret)
notify_spus_active();
return ret;
}
EXPORT_SYMBOL_GPL(spu_switch_event_register);
int spu_switch_event_unregister(struct notifier_block * n)
{
return blocking_notifier_chain_unregister(&spu_switch_notifier, n);
}
EXPORT_SYMBOL_GPL(spu_switch_event_unregister);
/**
* spu_bind_context - bind spu context to physical spu
* @spu: physical spu to bind to

View File

@ -86,5 +86,6 @@ struct spufs_calls spufs_calls = {
.spu_run = do_spu_run,
.coredump_extra_notes_size = spufs_coredump_extra_notes_size,
.coredump_extra_notes_write = spufs_coredump_extra_notes_write,
.notify_spus_active = do_notify_spus_active,
.owner = THIS_MODULE,
};

View File

@ -23,6 +23,7 @@
#include <linux/workqueue.h>
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
#include <asm/lmb.h>
@ -37,6 +38,8 @@ enum os_area_ldr_format {
HEADER_LDR_FORMAT_GZIP = 1,
};
#define OS_AREA_HEADER_MAGIC_NUM "cell_ext_os_area"
/**
* struct os_area_header - os area header segment.
* @magic_num: Always 'cell_ext_os_area'.
@ -114,13 +117,11 @@ struct os_area_params {
u8 _reserved_5[8];
};
enum {
OS_AREA_DB_MAGIC_NUM = 0x2d64622dU,
};
#define OS_AREA_DB_MAGIC_NUM "-db-"
/**
* struct os_area_db - Shared flash memory database.
* @magic_num: Always '-db-' = 0x2d64622d.
* @magic_num: Always '-db-'.
* @version: os_area_db format version number.
* @index_64: byte offset of the database id index for 64 bit variables.
* @count_64: number of usable 64 bit index entries
@ -135,7 +136,7 @@ enum {
*/
struct os_area_db {
u32 magic_num;
u8 magic_num[4];
u16 version;
u16 _reserved_1;
u16 index_64;
@ -265,12 +266,26 @@ static void __init os_area_get_property(struct device_node *node,
prop->name);
}
static void dump_field(char *s, const u8 *field, int size_of_field)
{
#if defined(DEBUG)
int i;
for (i = 0; i < size_of_field; i++)
s[i] = isprint(field[i]) ? field[i] : '.';
s[i] = 0;
#endif
}
#define dump_header(_a) _dump_header(_a, __func__, __LINE__)
static void _dump_header(const struct os_area_header *h, const char *func,
int line)
{
char str[sizeof(h->magic_num) + 1];
dump_field(str, h->magic_num, sizeof(h->magic_num));
pr_debug("%s:%d: h.magic_num: '%s'\n", func, line,
h->magic_num);
str);
pr_debug("%s:%d: h.hdr_version: %u\n", func, line,
h->hdr_version);
pr_debug("%s:%d: h.db_area_offset: %u\n", func, line,
@ -311,7 +326,8 @@ static void _dump_params(const struct os_area_params *p, const char *func,
static int verify_header(const struct os_area_header *header)
{
if (memcmp(header->magic_num, "cell_ext_os_area", 16)) {
if (memcmp(header->magic_num, OS_AREA_HEADER_MAGIC_NUM,
sizeof(header->magic_num))) {
pr_debug("%s:%d magic_num failed\n", __func__, __LINE__);
return -1;
}
@ -331,7 +347,8 @@ static int verify_header(const struct os_area_header *header)
static int db_verify(const struct os_area_db *db)
{
if (db->magic_num != OS_AREA_DB_MAGIC_NUM) {
if (memcmp(db->magic_num, OS_AREA_DB_MAGIC_NUM,
sizeof(db->magic_num))) {
pr_debug("%s:%d magic_num failed\n", __func__, __LINE__);
return -1;
}
@ -484,8 +501,11 @@ static int db_get_rtc_diff(const struct os_area_db *db, int64_t *rtc_diff)
static void _dump_db(const struct os_area_db *db, const char *func,
int line)
{
char str[sizeof(db->magic_num) + 1];
dump_field(str, db->magic_num, sizeof(db->magic_num));
pr_debug("%s:%d: db.magic_num: '%s'\n", func, line,
(const char*)&db->magic_num);
str);
pr_debug("%s:%d: db.version: %u\n", func, line,
db->version);
pr_debug("%s:%d: db.index_64: %u\n", func, line,
@ -516,7 +536,7 @@ static void os_area_db_init(struct os_area_db *db)
memset(db, 0, sizeof(struct os_area_db));
db->magic_num = OS_AREA_DB_MAGIC_NUM;
memcpy(db->magic_num, OS_AREA_DB_MAGIC_NUM, sizeof(db->magic_num));
db->version = 1;
db->index_64 = HEADER_SIZE;
db->count_64 = VALUES_64_COUNT;

View File

@ -29,6 +29,7 @@
#include <asm/vdso_datapage.h>
#include <asm/pSeries_reconfig.h>
#include "xics.h"
#include "plpar_wrappers.h"
/* This version can't take the spinlock, because it never returns */
static struct rtas_args rtas_stop_self_args = {
@ -58,6 +59,7 @@ static void pseries_mach_cpu_die(void)
local_irq_disable();
idle_task_exit();
xics_teardown_cpu(0);
unregister_slb_shadow(hard_smp_processor_id(), __pa(get_slb_shadow()));
rtas_stop_self();
/* Should never get here... */
BUG();

View File

@ -5,7 +5,7 @@
* Based upon code written by Ross Biro, Linus Torvalds, Bob Manson,
* and David Mosberger.
*
* Added Linux support -miguel (weird, eh?, the orignal code was meant
* Added Linux support -miguel (weird, eh?, the original code was meant
* to emulate SunOS).
*/

View File

@ -436,7 +436,14 @@ void __init time_init(void)
static inline unsigned long do_gettimeoffset(void)
{
return (*master_l10_counter >> 10) & 0x1fffff;
unsigned long val = *master_l10_counter;
unsigned long usec = (val >> 10) & 0x1fffff;
/* Limit hit? */
if (val & 0x80000000)
usec += 1000000 / HZ;
return usec;
}
/* Ok, my cute asm atomicity trick doesn't work anymore.

View File

@ -1,6 +1,6 @@
/* arch/sparc64/kernel/ktlb.S: Kernel mapping TLB miss handling.
*
* Copyright (C) 1995, 1997, 2005 David S. Miller <davem@davemloft.net>
* Copyright (C) 1995, 1997, 2005, 2008 David S. Miller <davem@davemloft.net>
* Copyright (C) 1996 Eddie C. Dost (ecd@brainaid.de)
* Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1996,98,99 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
@ -226,6 +226,7 @@ kvmap_dtlb_load:
ba,pt %xcc, sun4v_dtlb_load
mov %g5, %g3
#ifdef CONFIG_SPARSEMEM_VMEMMAP
kvmap_vmemmap:
sub %g4, %g5, %g5
srlx %g5, 22, %g5
@ -234,6 +235,7 @@ kvmap_vmemmap:
or %g1, %lo(vmemmap_table), %g1
ba,pt %xcc, kvmap_dtlb_load
ldx [%g1 + %g5], %g5
#endif
kvmap_dtlb_nonlinear:
/* Catch kernel NULL pointer derefs. */
@ -242,12 +244,14 @@ kvmap_dtlb_nonlinear:
bleu,pn %xcc, kvmap_dtlb_longpath
nop
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/* Do not use the TSB for vmemmap. */
mov (VMEMMAP_BASE >> 24), %g5
sllx %g5, 24, %g5
cmp %g4,%g5
bgeu,pn %xcc, kvmap_vmemmap
nop
#endif
KERN_TSB_LOOKUP_TL1(%g4, %g6, %g5, %g1, %g2, %g3, kvmap_dtlb_load)

View File

@ -1275,4 +1275,20 @@ int pci_dma_supported(struct pci_dev *pdev, u64 device_mask)
return (device_mask & dma_addr_mask) == dma_addr_mask;
}
void pci_resource_to_user(const struct pci_dev *pdev, int bar,
const struct resource *rp, resource_size_t *start,
resource_size_t *end)
{
struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
unsigned long offset;
if (rp->flags & IORESOURCE_IO)
offset = pbm->io_space.start;
else
offset = pbm->mem_space.start;
*start = rp->start - offset;
*end = rp->end - offset;
}
#endif /* !(CONFIG_PCI) */

View File

@ -850,7 +850,7 @@ static int pbm_routes_this_ino(struct pci_pbm_info *pbm, u32 ino)
/* How the Tomatillo IRQs are routed around is pure guesswork here.
*
* All the Tomatillo devices I see in prtconf dumps seem to have only
* a single PCI bus unit attached to it. It would seem they are seperate
* a single PCI bus unit attached to it. It would seem they are separate
* devices because their PortID (ie. JBUS ID) values are all different
* and thus the registers are mapped to totally different locations.
*

View File

@ -215,6 +215,7 @@ sun4v_itlb_error:
1: ba,pt %xcc, etrap
2: or %g7, %lo(2b), %g7
mov %l4, %o1
call sun4v_itlb_error_report
add %sp, PTREGS_OFF, %o0
@ -241,6 +242,7 @@ sun4v_dtlb_error:
1: ba,pt %xcc, etrap
2: or %g7, %lo(2b), %g7
mov %l4, %o1
call sun4v_dtlb_error_report
add %sp, PTREGS_OFF, %o0

View File

@ -1950,6 +1950,8 @@ void sun4v_itlb_error_report(struct pt_regs *regs, int tl)
printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n",
regs->tpc, tl);
print_symbol(KERN_EMERG "SUN4V-ITLB: TPC<%s>\n", regs->tpc);
printk(KERN_EMERG "SUN4V-ITLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
print_symbol(KERN_EMERG "SUN4V-ITLB: O7<%s>\n", regs->u_regs[UREG_I7]);
printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] "
"pte[%lx] error[%lx]\n",
sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx,
@ -1971,6 +1973,8 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl)
printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n",
regs->tpc, tl);
print_symbol(KERN_EMERG "SUN4V-DTLB: TPC<%s>\n", regs->tpc);
printk(KERN_EMERG "SUN4V-DTLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
print_symbol(KERN_EMERG "SUN4V-DTLB: O7<%s>\n", regs->u_regs[UREG_I7]);
printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] "
"pte[%lx] error[%lx]\n",
sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx,

View File

@ -79,14 +79,14 @@ int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock)
n = read(in_fds[0], &c, sizeof(c));
if (n == 0) {
printk("harddog_open - EOF on watchdog pipe\n");
helper_wait(pid);
helper_wait(pid, 1, NULL);
err = -EIO;
goto out_close_out;
}
else if (n < 0) {
printk("harddog_open - read of watchdog pipe failed, "
"err = %d\n", errno);
helper_wait(pid);
helper_wait(pid, 1, NULL);
err = n;
goto out_close_out;
}

View File

@ -2256,14 +2256,12 @@ static int __init apm_init(void)
apm_info.disabled = 1;
return -ENODEV;
}
if (PM_IS_ACTIVE()) {
if (pm_flags & PM_ACPI) {
printk(KERN_NOTICE "apm: overridden by ACPI.\n");
apm_info.disabled = 1;
return -ENODEV;
}
#ifdef CONFIG_PM_LEGACY
pm_active = 1;
#endif
pm_flags |= PM_APM;
/*
* Set up a segment that references the real mode segment 0x40
@ -2366,9 +2364,7 @@ static void __exit apm_exit(void)
kthread_stop(kapmd_task);
kapmd_task = NULL;
}
#ifdef CONFIG_PM_LEGACY
pm_active = 0;
#endif
pm_flags &= ~PM_APM;
}
module_init(apm_init);

View File

@ -196,7 +196,7 @@ default_entry:
/* Do an early initialization of the fixmap area */
movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax
addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
addl $0x67, %eax /* 0x67 == _PAGE_TABLE */
movl %eax, 4092(%edx)
xorl %ebx,%ebx /* This is the boot CPU (BSP) */

View File

@ -657,7 +657,7 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
hpet_pie_count = 0;
}
if (hpet_rtc_flags & RTC_PIE &&
if (hpet_rtc_flags & RTC_AIE &&
(curr_time.tm_sec == hpet_alarm_time.tm_sec) &&
(curr_time.tm_min == hpet_alarm_time.tm_min) &&
(curr_time.tm_hour == hpet_alarm_time.tm_hour))

View File

@ -2169,14 +2169,10 @@ static inline void __init check_timer(void)
{
int apic1, pin1, apic2, pin2;
int vector;
unsigned int ver;
unsigned long flags;
local_irq_save(flags);
ver = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(ver);
/*
* get/set the timer IRQ vector:
*/
@ -2189,15 +2185,11 @@ static inline void __init check_timer(void)
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
* disabled in the local APIC. Finally timer interrupts
* need to be acknowledged manually in the 8259A for
* timer_interrupt() and for the i82489DX when using
* the NMI watchdog.
* disabled in the local APIC.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
timer_ack = !cpu_has_tsc;
timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
timer_ack = 1;
if (timer_over_8254 > 0)
enable_8259A_irq(0);

View File

@ -278,12 +278,12 @@ static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
static irqreturn_t mfgpt_tick(int irq, void *dev_id)
{
/* Turn off the clock (and clear the event) */
mfgpt_disable_timer(mfgpt_event_clock);
if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
return IRQ_HANDLED;
/* Turn off the clock */
mfgpt_disable_timer(mfgpt_event_clock);
/* Clear the counter */
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
@ -319,10 +319,6 @@ static int __init mfgpt_timer_setup(void)
}
mfgpt_event_clock = timer;
/* Set the clock scale and enable the event mode for CMP2 */
val = MFGPT_SCALE | (3 << 8);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
/* Set up the IRQ on the MFGPT side */
if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
@ -339,6 +335,11 @@ static int __init mfgpt_timer_setup(void)
goto err;
}
/* Set the clock scale and enable the event mode for CMP2 */
val = MFGPT_SCALE | (3 << 8);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
/* Set up the clock event */
mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32);
mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,

View File

@ -25,7 +25,6 @@
#include <asm/smp.h>
#include <asm/nmi.h>
#include <asm/timer.h>
#include "mach_traps.h"
@ -84,7 +83,7 @@ static int __init check_nmi_watchdog(void)
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!prev_nmi_count)
goto error;
return -1;
printk(KERN_INFO "Testing NMI watchdog ... ");
@ -119,7 +118,7 @@ static int __init check_nmi_watchdog(void)
if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
atomic_set(&nmi_active, -1);
goto error;
return -1;
}
printk("OK.\n");
@ -130,10 +129,6 @@ static int __init check_nmi_watchdog(void)
kfree(prev_nmi_count);
return 0;
error:
timer_ack = !cpu_has_tsc;
return -1;
}
/* This needs to happen later in boot so counters are working */
late_initcall(check_nmi_watchdog);

View File

@ -204,6 +204,10 @@ void cpu_idle(void)
}
}
static void do_nothing(void *unused)
{
}
void cpu_idle_wait(void)
{
unsigned int cpu, this_cpu = get_cpu();
@ -228,6 +232,13 @@ void cpu_idle_wait(void)
cpu_clear(cpu, map);
}
cpus_and(map, map, cpu_online_map);
/*
* We waited 1 sec, if a CPU still did not call idle
* it may be because it is in idle and not waking up
* because it has nothing to do.
* Give all the remaining CPUS a kick.
*/
smp_call_function_mask(map, do_nothing, 0, 0);
} while (!cpus_empty(map));
set_cpus_allowed(current, tmp);

View File

@ -135,6 +135,10 @@ static void poll_idle (void)
cpu_relax();
}
static void do_nothing(void *unused)
{
}
void cpu_idle_wait(void)
{
unsigned int cpu, this_cpu = get_cpu();
@ -160,6 +164,13 @@ void cpu_idle_wait(void)
cpu_clear(cpu, map);
}
cpus_and(map, map, cpu_online_map);
/*
* We waited 1 sec, if a CPU still did not call idle
* it may be because it is in idle and not waking up
* because it has nothing to do.
* Give all the remaining CPUS a kick.
*/
smp_call_function_mask(map, do_nothing, 0, 0);
} while (!cpus_empty(map));
set_cpus_allowed(current, tmp);

View File

@ -141,8 +141,8 @@ static void __cpuinit smp_store_cpu_info(int id)
struct cpuinfo_x86 *c = &cpu_data(id);
*c = boot_cpu_data;
identify_cpu(c);
c->cpu_index = id;
identify_cpu(c);
print_cpu_info(c);
}
@ -526,7 +526,7 @@ struct create_idle {
int cpu;
};
void do_fork_idle(struct work_struct *work)
static void __cpuinit do_fork_idle(struct work_struct *work)
{
struct create_idle *c_idle =
container_of(work, struct create_idle, work);

View File

@ -541,6 +541,7 @@ fastcall void do_##name(struct pt_regs * regs, long error_code) \
info.si_errno = 0; \
info.si_code = sicode; \
info.si_addr = (void __user *)siaddr; \
trace_hardirqs_fixup(); \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \

View File

@ -635,6 +635,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
info.si_errno = 0; \
info.si_code = sicode; \
info.si_addr = (void __user *)siaddr; \
trace_hardirqs_fixup(); \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \

View File

@ -321,8 +321,13 @@ extern void set_highmem_pages_init(int);
static void __init set_highmem_pages_init(int bad_ppro)
{
int pfn;
for (pfn = highstart_pfn; pfn < highend_pfn; pfn++)
add_one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
for (pfn = highstart_pfn; pfn < highend_pfn; pfn++) {
/*
* Holes under sparsemem might not have no mem_map[]:
*/
if (pfn_valid(pfn))
add_one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
}
totalram_pages += totalhigh_pages;
}
#endif /* CONFIG_FLATMEM */

View File

@ -380,7 +380,7 @@ static int __init ppro_init(char ** cpu_type)
if (cpu_model == 14)
*cpu_type = "i386/core";
else if (cpu_model == 15)
else if (cpu_model == 15 || cpu_model == 23)
*cpu_type = "i386/core_2";
else if (cpu_model > 0xd)
return 0;

View File

@ -25,7 +25,6 @@
#include <linux/time.h>
#include <asm/uaccess.h>
static DEFINE_PER_CPU(unsigned long long, blk_trace_cpu_offset) = { 0, };
static unsigned int blktrace_seq __read_mostly = 1;
/*
@ -41,7 +40,7 @@ static void trace_note(struct blk_trace *bt, pid_t pid, int action,
const int cpu = smp_processor_id();
t->magic = BLK_IO_TRACE_MAGIC | BLK_IO_TRACE_VERSION;
t->time = cpu_clock(cpu) - per_cpu(blk_trace_cpu_offset, cpu);
t->time = ktime_to_ns(ktime_get());
t->device = bt->dev;
t->action = action;
t->pid = pid;
@ -159,7 +158,7 @@ void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
t->magic = BLK_IO_TRACE_MAGIC | BLK_IO_TRACE_VERSION;
t->sequence = ++(*sequence);
t->time = cpu_clock(cpu) - per_cpu(blk_trace_cpu_offset, cpu);
t->time = ktime_to_ns(ktime_get());
t->sector = sector;
t->bytes = bytes;
t->action = what;
@ -179,7 +178,7 @@ void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
EXPORT_SYMBOL_GPL(__blk_add_trace);
static struct dentry *blk_tree_root;
static struct mutex blk_tree_mutex;
static DEFINE_MUTEX(blk_tree_mutex);
static unsigned int root_users;
static inline void blk_remove_root(void)
@ -505,77 +504,3 @@ void blk_trace_shutdown(struct request_queue *q)
blk_trace_remove(q);
}
}
/*
* Average offset over two calls to cpu_clock() with a gettimeofday()
* in the middle
*/
static void blk_check_time(unsigned long long *t, int this_cpu)
{
unsigned long long a, b;
struct timeval tv;
a = cpu_clock(this_cpu);
do_gettimeofday(&tv);
b = cpu_clock(this_cpu);
*t = tv.tv_sec * 1000000000 + tv.tv_usec * 1000;
*t -= (a + b) / 2;
}
/*
* calibrate our inter-CPU timings
*/
static void blk_trace_check_cpu_time(void *data)
{
unsigned long long *t;
int this_cpu = get_cpu();
t = &per_cpu(blk_trace_cpu_offset, this_cpu);
/*
* Just call it twice, hopefully the second call will be cache hot
* and a little more precise
*/
blk_check_time(t, this_cpu);
blk_check_time(t, this_cpu);
put_cpu();
}
static void blk_trace_set_ht_offsets(void)
{
#if defined(CONFIG_SCHED_SMT)
int cpu, i;
/*
* now make sure HT siblings have the same time offset
*/
preempt_disable();
for_each_online_cpu(cpu) {
unsigned long long *cpu_off, *sibling_off;
for_each_cpu_mask(i, per_cpu(cpu_sibling_map, cpu)) {
if (i == cpu)
continue;
cpu_off = &per_cpu(blk_trace_cpu_offset, cpu);
sibling_off = &per_cpu(blk_trace_cpu_offset, i);
*sibling_off = *cpu_off;
}
}
preempt_enable();
#endif
}
static __init int blk_trace_init(void)
{
mutex_init(&blk_tree_mutex);
on_each_cpu(blk_trace_check_cpu_time, NULL, 1, 1);
blk_trace_set_ht_offsets();
return 0;
}
module_init(blk_trace_init);

View File

@ -82,6 +82,12 @@ config ACPI_PROCFS_POWER
and functions, which do not yet exist in /sys
Say N to delete power /proc/acpi/ folders that have moved to /sys/
config ACPI_SYSFS_POWER
bool "Future power /sys interface"
select POWER_SUPPLY
default y
---help---
Say N to disable power /sys interface
config ACPI_PROC_EVENT
bool "Deprecated /proc/acpi/event support"
depends on PROC_FS
@ -103,7 +109,6 @@ config ACPI_PROC_EVENT
config ACPI_AC
tristate "AC Adapter"
depends on X86
select POWER_SUPPLY
default y
help
This driver adds support for the AC Adapter object, which indicates
@ -113,7 +118,6 @@ config ACPI_AC
config ACPI_BATTERY
tristate "Battery"
depends on X86
select POWER_SUPPLY
default y
help
This driver adds support for battery information through
@ -368,7 +372,6 @@ config ACPI_HOTPLUG_MEMORY
config ACPI_SBS
tristate "Smart Battery System"
depends on X86
select POWER_SUPPLY
help
This driver adds support for the Smart Battery System, another
type of access to battery information, found on some laptops.

View File

@ -31,7 +31,9 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#endif
#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
#endif
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
@ -79,7 +81,9 @@ static struct acpi_driver acpi_ac_driver = {
};
struct acpi_ac {
#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply charger;
#endif
struct acpi_device * device;
unsigned long state;
};
@ -94,7 +98,7 @@ static const struct file_operations acpi_ac_fops = {
.release = single_release,
};
#endif
#ifdef CONFIG_ACPI_SYSFS_POWER
static int get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@ -113,7 +117,7 @@ static int get_ac_property(struct power_supply *psy,
static enum power_supply_property ac_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};
#endif
/* --------------------------------------------------------------------------
AC Adapter Management
-------------------------------------------------------------------------- */
@ -241,7 +245,9 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
acpi_bus_generate_netlink_event(device->pnp.device_class,
device->dev.bus_id, event,
(u32) ac->state);
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
#endif
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@ -280,12 +286,14 @@ static int acpi_ac_add(struct acpi_device *device)
#endif
if (result)
goto end;
#ifdef CONFIG_ACPI_SYSFS_POWER
ac->charger.name = acpi_device_bid(device);
ac->charger.type = POWER_SUPPLY_TYPE_MAINS;
ac->charger.properties = ac_props;
ac->charger.num_properties = ARRAY_SIZE(ac_props);
ac->charger.get_property = get_ac_property;
power_supply_register(&ac->device->dev, &ac->charger);
#endif
status = acpi_install_notify_handler(device->handle,
ACPI_ALL_NOTIFY, acpi_ac_notify,
ac);
@ -319,8 +327,10 @@ static int acpi_ac_resume(struct acpi_device *device)
old_state = ac->state;
if (acpi_ac_get_state(ac))
return 0;
#ifdef CONFIG_ACPI_SYSFS_POWER
if (old_state != ac->state)
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
#endif
return 0;
}
@ -337,8 +347,10 @@ static int acpi_ac_remove(struct acpi_device *device, int type)
status = acpi_remove_notify_handler(device->handle,
ACPI_ALL_NOTIFY, acpi_ac_notify);
#ifdef CONFIG_ACPI_SYSFS_POWER
if (ac->charger.dev)
power_supply_unregister(&ac->charger);
#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_ac_remove_fs(device);
#endif

View File

@ -40,7 +40,9 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
#endif
#define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
@ -86,7 +88,9 @@ MODULE_DEVICE_TABLE(acpi, battery_device_ids);
struct acpi_battery {
struct mutex lock;
#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply bat;
#endif
struct acpi_device *device;
unsigned long update_time;
int current_now;
@ -117,6 +121,7 @@ inline int acpi_battery_present(struct acpi_battery *battery)
return battery->device->status.battery_present;
}
#ifdef CONFIG_ACPI_SYSFS_POWER
static int acpi_battery_technology(struct acpi_battery *battery)
{
if (!strcasecmp("NiCd", battery->type))
@ -222,6 +227,7 @@ static enum power_supply_property energy_battery_props[] = {
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
};
#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
inline char *acpi_battery_units(struct acpi_battery *battery)
@ -398,6 +404,7 @@ static int acpi_battery_init_alarm(struct acpi_battery *battery)
return acpi_battery_set_alarm(battery);
}
#ifdef CONFIG_ACPI_SYSFS_POWER
static ssize_t acpi_battery_alarm_show(struct device *dev,
struct device_attribute *attr,
char *buf)
@ -429,11 +436,6 @@ static int sysfs_add_battery(struct acpi_battery *battery)
{
int result;
battery->update_time = 0;
result = acpi_battery_get_info(battery);
acpi_battery_init_alarm(battery);
if (result)
return result;
if (battery->power_unit) {
battery->bat.properties = charge_battery_props;
battery->bat.num_properties =
@ -462,18 +464,31 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
power_supply_unregister(&battery->bat);
battery->bat.dev = NULL;
}
#endif
static int acpi_battery_update(struct acpi_battery *battery)
{
int result = acpi_battery_get_status(battery);
int result;
result = acpi_battery_get_status(battery);
if (result)
return result;
#ifdef CONFIG_ACPI_SYSFS_POWER
if (!acpi_battery_present(battery)) {
sysfs_remove_battery(battery);
battery->update_time = 0;
return 0;
}
#endif
if (!battery->update_time) {
result = acpi_battery_get_info(battery);
if (result)
return result;
acpi_battery_init_alarm(battery);
}
#ifdef CONFIG_ACPI_SYSFS_POWER
if (!battery->bat.dev)
sysfs_add_battery(battery);
#endif
return acpi_battery_get_state(battery);
}
@ -767,9 +782,11 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data)
acpi_bus_generate_netlink_event(device->pnp.device_class,
device->dev.bus_id, event,
acpi_battery_present(battery));
#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_batter_update could remove power_supply object */
if (battery->bat.dev)
kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE);
#endif
}
static int acpi_battery_add(struct acpi_device *device)
@ -828,7 +845,9 @@ static int acpi_battery_remove(struct acpi_device *device, int type)
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
#ifdef CONFIG_ACPI_SYSFS_POWER
sysfs_remove_battery(battery);
#endif
mutex_destroy(&battery->lock);
kfree(battery);
return 0;

View File

@ -29,7 +29,6 @@
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/pm_legacy.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
#ifdef CONFIG_X86
@ -764,16 +763,14 @@ static int __init acpi_init(void)
result = acpi_bus_init();
if (!result) {
#ifdef CONFIG_PM_LEGACY
if (!PM_IS_ACTIVE())
pm_active = 1;
if (!(pm_flags & PM_APM))
pm_flags |= PM_ACPI;
else {
printk(KERN_INFO PREFIX
"APM is already active, exiting\n");
disable_acpi();
result = -ENODEV;
}
#endif
} else
disable_acpi();

View File

@ -892,6 +892,17 @@ static int acpi_ec_stop(struct acpi_device *device, int type)
return 0;
}
int __init acpi_boot_ec_enable(void)
{
if (!boot_ec || boot_ec->handlers_installed)
return 0;
if (!ec_install_handlers(boot_ec)) {
first_ec = boot_ec;
return 0;
}
return -EFAULT;
}
int __init acpi_ec_ecdt_probe(void)
{
int ret;
@ -924,9 +935,10 @@ int __init acpi_ec_ecdt_probe(void)
goto error;
/* We really need to limit this workaround, the only ASUS,
* which needs it, has fake EC._INI method, so use it as flag.
* Keep boot_ec struct as it will be needed soon.
*/
if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
goto error;
return -ENODEV;
}
ret = ec_install_handlers(boot_ec);

View File

@ -344,7 +344,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
* setup will potentially execute control methods
* (e.g., _REG method for this region)
*/
acpi_ex_relinquish_interpreter();
acpi_ex_exit_interpreter();
status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
handler_desc->address_space.context,
@ -352,7 +352,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
/* Re-enter the interpreter */
acpi_ex_reacquire_interpreter();
acpi_ex_enter_interpreter();
/* Check for failure of the Region Setup */
@ -405,7 +405,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
* exit the interpreter because the handler *might* block -- we don't
* know what it will do, so we can't hold the lock on the intepreter.
*/
acpi_ex_relinquish_interpreter();
acpi_ex_exit_interpreter();
}
/* Call the handler */
@ -426,7 +426,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
* We just returned from a non-default handler, we must re-enter the
* interpreter
*/
acpi_ex_reacquire_interpreter();
acpi_ex_enter_interpreter();
}
return_ACPI_STATUS(status);

View File

@ -429,6 +429,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
&polarity, &link,
acpi_pci_allocate_irq);
if (irq < 0) {
/*
* IDE legacy mode controller IRQs are magic. Why do compat
* extensions always make such a nasty mess.
*/
if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
(dev->class & 0x05) == 0)
return 0;
}
/*
* No IRQ known to the ACPI subsystem - maybe the BIOS /
* driver reported one, then use it. Exit in any case.

View File

@ -76,7 +76,11 @@ static void (*pm_idle_save) (void) __read_mostly;
#define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
#ifdef CONFIG_CPU_IDLE
module_param(max_cstate, uint, 0000);
#else
module_param(max_cstate, uint, 0644);
#endif
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);

View File

@ -40,7 +40,9 @@
#include <linux/jiffies.h>
#include <linux/delay.h>
#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
#endif
#include "sbshc.h"
@ -80,7 +82,9 @@ static const struct acpi_device_id sbs_device_ids[] = {
MODULE_DEVICE_TABLE(acpi, sbs_device_ids);
struct acpi_battery {
#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply bat;
#endif
struct acpi_sbs *sbs;
#ifdef CONFIG_ACPI_PROCFS_POWER
struct proc_dir_entry *proc_entry;
@ -113,7 +117,9 @@ struct acpi_battery {
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
struct acpi_sbs {
#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply charger;
#endif
struct acpi_device *device;
struct acpi_smb_hc *hc;
struct mutex lock;
@ -157,6 +163,7 @@ static inline int acpi_battery_scale(struct acpi_battery *battery)
acpi_battery_ipscale(battery);
}
#ifdef CONFIG_ACPI_SYSFS_POWER
static int sbs_get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@ -294,6 +301,7 @@ static enum power_supply_property sbs_energy_battery_props[] = {
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
};
#endif
/* --------------------------------------------------------------------------
Smart Battery System Management
@ -429,6 +437,7 @@ static int acpi_ac_get_present(struct acpi_sbs *sbs)
return result;
}
#ifdef CONFIG_ACPI_SYSFS_POWER
static ssize_t acpi_battery_alarm_show(struct device *dev,
struct device_attribute *attr,
char *buf)
@ -458,6 +467,7 @@ static struct device_attribute alarm_attr = {
.show = acpi_battery_alarm_show,
.store = acpi_battery_alarm_store,
};
#endif
/* --------------------------------------------------------------------------
FS Interface (/proc/acpi)
@ -793,6 +803,7 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
&acpi_battery_state_fops, &acpi_battery_alarm_fops,
battery);
#endif
#ifdef CONFIG_ACPI_SYSFS_POWER
battery->bat.name = battery->name;
battery->bat.type = POWER_SUPPLY_TYPE_BATTERY;
if (!acpi_battery_mode(battery)) {
@ -813,6 +824,7 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
goto end;
battery->have_sysfs_alarm = 1;
end:
#endif
printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
battery->name, sbs->battery->present ? "present" : "absent");
@ -822,12 +834,13 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
{
struct acpi_battery *battery = &sbs->battery[id];
#ifdef CONFIG_ACPI_SYSFS_POWER
if (battery->bat.dev) {
if (battery->have_sysfs_alarm)
device_remove_file(battery->bat.dev, &alarm_attr);
power_supply_unregister(&battery->bat);
}
#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
if (battery->proc_entry)
acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir);
@ -848,12 +861,14 @@ static int acpi_charger_add(struct acpi_sbs *sbs)
if (result)
goto end;
#endif
#ifdef CONFIG_ACPI_SYSFS_POWER
sbs->charger.name = "sbs-charger";
sbs->charger.type = POWER_SUPPLY_TYPE_MAINS;
sbs->charger.properties = sbs_ac_props;
sbs->charger.num_properties = ARRAY_SIZE(sbs_ac_props);
sbs->charger.get_property = sbs_get_ac_property;
power_supply_register(&sbs->device->dev, &sbs->charger);
#endif
printk(KERN_INFO PREFIX "%s [%s]: AC Adapter [%s] (%s)\n",
ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
ACPI_AC_DIR_NAME, sbs->charger_present ? "on-line" : "off-line");
@ -863,8 +878,10 @@ static int acpi_charger_add(struct acpi_sbs *sbs)
static void acpi_charger_remove(struct acpi_sbs *sbs)
{
#ifdef CONFIG_ACPI_SYSFS_POWER
if (sbs->charger.dev)
power_supply_unregister(&sbs->charger);
#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
if (sbs->charger_entry)
acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir);
@ -885,7 +902,9 @@ void acpi_sbs_callback(void *context)
ACPI_SBS_NOTIFY_STATUS,
sbs->charger_present);
#endif
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&sbs->charger.dev->kobj, KOBJ_CHANGE);
#endif
}
if (sbs->manager_present) {
for (id = 0; id < MAX_SBS_BAT; ++id) {
@ -902,7 +921,9 @@ void acpi_sbs_callback(void *context)
ACPI_SBS_NOTIFY_STATUS,
bat->present);
#endif
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&bat->bat.dev->kobj, KOBJ_CHANGE);
#endif
}
}
}

View File

@ -1449,6 +1449,8 @@ static int acpi_bus_scan_fixed(struct acpi_device *root)
return result;
}
int __init acpi_boot_ec_enable(void);
static int __init acpi_scan_init(void)
{
int result;
@ -1480,6 +1482,10 @@ static int __init acpi_scan_init(void)
* Enumerate devices in the ACPI namespace.
*/
result = acpi_bus_scan_fixed(acpi_root);
/* EC region might be needed at bus_scan, so enable it now */
acpi_boot_ec_enable();
if (!result)
result = acpi_bus_scan(acpi_root, &ops);

View File

@ -132,6 +132,7 @@ enum {
ich8_2port_sata,
ich8m_apple_sata_ahci, /* locks up on second port enable */
tolapai_sata_ahci,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
/* constants for mapping table */
P0 = 0, /* port 0 */
@ -165,6 +166,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int ich_pata_cable_detect(struct ata_port *ap);
static u8 piix_vmw_bmdma_status(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@ -175,6 +177,8 @@ static unsigned int in_module_init = 1;
static const struct pci_device_id piix_pci_tbl[] = {
/* Intel PIIX3 for the 430HX etc */
{ 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma },
/* VMware ICH4 */
{ 0x8086, 0x7111, 0x15ad, 0x1976, 0, 0, piix_pata_vmw },
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
@ -383,6 +387,38 @@ static const struct ata_port_operations piix_sata_ops = {
.port_start = ata_port_start,
};
static const struct ata_port_operations piix_vmw_ops = {
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = piix_vmw_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = piix_pata_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static const struct piix_map_db ich5_map_db = {
.mask = 0x7,
.port_enable = 0x3,
@ -623,6 +659,16 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_sata_ops,
},
[piix_pata_vmw] =
{
.sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
.udma_mask = ATA_UDMA_MASK_40C,
.port_ops = &piix_vmw_ops,
},
};
static struct pci_bits piix_enable_bits[] = {
@ -1135,6 +1181,11 @@ static int piix_pci_device_resume(struct pci_dev *pdev)
}
#endif
static u8 piix_vmw_bmdma_status(struct ata_port *ap)
{
return ata_bmdma_status(ap) & ~ATA_DMA_ERR;
}
#define AHCI_PCI_BAR 5
#define AHCI_GLOBAL_CTL 0x04
#define AHCI_ENABLE (1 << 31)

View File

@ -6998,7 +6998,9 @@ int ata_host_start(struct ata_host *host)
rc = ap->ops->port_start(ap);
if (rc) {
if (rc != -ENODEV)
dev_printk(KERN_ERR, host->dev, "failed to start port %d (errno=%d)\n", i, rc);
dev_printk(KERN_ERR, host->dev,
"failed to start port %d "
"(errno=%d)\n", i, rc);
goto err_out;
}
}

View File

@ -1733,11 +1733,15 @@ static void ata_eh_link_autopsy(struct ata_link *link)
ehc->i.action &= ~ATA_EH_PERDEV_MASK;
}
/* consider speeding down */
/* propagate timeout to host link */
if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link))
ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT;
/* record error and consider speeding down */
dev = ehc->i.dev;
if (!dev && ata_link_max_devices(link) == 1 &&
ata_dev_enabled(link->device))
dev = link->device;
if (!dev && ((ata_link_max_devices(link) == 1 &&
ata_dev_enabled(link->device))))
dev = link->device;
if (dev)
ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
@ -1759,8 +1763,14 @@ void ata_eh_autopsy(struct ata_port *ap)
{
struct ata_link *link;
__ata_port_for_each_link(link, ap)
ata_port_for_each_link(link, ap)
ata_eh_link_autopsy(link);
/* Autopsy of fanout ports can affect host link autopsy.
* Perform host link autopsy last.
*/
if (ap->nr_pmp_links)
ata_eh_link_autopsy(&ap->link);
}
/**
@ -2157,13 +2167,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (ata_link_offline(link))
continue;
/* apply class override and convert UNKNOWN to NONE */
/* apply class override */
if (lflags & ATA_LFLAG_ASSUME_ATA)
classes[dev->devno] = ATA_DEV_ATA;
else if (lflags & ATA_LFLAG_ASSUME_SEMB)
classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
classes[dev->devno] = ATA_DEV_NONE;
}
/* record current link speed */

View File

@ -495,14 +495,12 @@ static void sata_pmp_quirks(struct ata_port *ap)
/* SError.N need a kick in the ass to get working */
link->flags |= ATA_LFLAG_HRST_TO_RESUME;
/* class code report is unreliable */
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
/* The config device, which can be either at
* port 0 or 5, locks up on SRST.
/* Class code report is unreliable and SRST
* times out under certain configurations.
* Config device can be at port 0 or 5 and
* locks up on SRST.
*/
if (link->pmp == 0 || link->pmp == 5)
if (link->pmp <= 5)
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;

View File

@ -841,6 +841,9 @@ static void ata_scsi_dev_config(struct scsi_device *sdev,
blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
}
if (dev->class == ATA_DEV_ATA)
sdev->manage_start_stop = 1;
if (dev->flags & ATA_DFLAG_AN)
set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
@ -872,8 +875,6 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
ata_scsi_sdev_config(sdev);
sdev->manage_start_stop = 1;
if (dev)
ata_scsi_dev_config(sdev, dev);

View File

@ -806,7 +806,10 @@ int ata_pci_init_one(struct pci_dev *pdev,
if (rc)
goto err_out;
if (!legacy_mode) {
if (!legacy_mode && pdev->irq) {
/* We may have no IRQ assigned in which case we can poll. This
shouldn't happen on a sane system but robustness is cheap
in this case */
rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
if (rc)
@ -814,7 +817,7 @@ int ata_pci_init_one(struct pci_dev *pdev,
ata_port_desc(host->ports[0], "irq %d", pdev->irq);
ata_port_desc(host->ports[1], "irq %d", pdev->irq);
} else {
} else if (legacy_mode) {
if (!ata_port_is_dummy(host->ports[0])) {
rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
pi->port_ops->irq_handler,

View File

@ -1509,7 +1509,8 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev)
if (res == NULL)
return -EINVAL;
while (bfin_port_info[board_idx].udma_mask>0 && udma_fsclk[udma_mode] > fsclk) {
while (bfin_port_info[board_idx].udma_mask > 0 &&
udma_fsclk[udma_mode] > fsclk) {
udma_mode--;
bfin_port_info[board_idx].udma_mask >>= 1;
}

View File

@ -130,10 +130,11 @@ static struct ata_port_operations ixp4xx_port_ops = {
.port_start = ata_port_start,
};
static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
static void ixp4xx_setup_port(struct ata_port *ap,
struct ixp4xx_pata_data *data,
unsigned long raw_cs0, unsigned long raw_cs1)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned long raw_cmd = raw_cs0;
unsigned long raw_ctl = raw_cs1 + 0x06;

Some files were not shown because too many files have changed in this diff Show More