diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e4f599f20e38..8a0e1ec95e4a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -229,6 +229,12 @@ config LEDS_PWM help This option enables support for pwm driven LEDs +config LEDS_REGULATOR + tristate "REGULATOR driven LED support" + depends on LEDS_CLASS && REGULATOR + help + This option enables support for regulator driven LEDs. + config LEDS_BD2802 tristate "LED driver for BD2802 RGB LED" depends on LEDS_CLASS && I2C @@ -236,6 +242,33 @@ config LEDS_BD2802 This option enables support for BD2802GU RGB LED driver chips accessed via the I2C bus. +config LEDS_INTEL_SS4200 + tristate "LED driver for Intel NAS SS4200 series" + depends on LEDS_CLASS && PCI && DMI + help + This option enables support for the Intel SS4200 series of + Network Attached Storage servers. You may control the hard + drive or power LEDs on the front panel. Using this driver + can stop the front LED from blinking after startup. + +config LEDS_LT3593 + tristate "LED driver for LT3593 controllers" + depends on LEDS_CLASS && GENERIC_GPIO + help + This option enables support for LEDs driven by a Linear Technology + LT3593 controller. This controller uses a special one-wire pulse + coding protocol to set the brightness. + +config LEDS_ADP5520 + tristate "LED Support for ADP5520/ADP5501 PMIC" + depends on LEDS_CLASS && PMIC_ADP5520 + help + This option enables support for on-chip LED drivers found + on Analog Devices ADP5520/ADP5501 PMICs. + + To compile this driver as a module, choose M here: the module will + be called leds-adp5520. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 46d72704d606..9e63869d7c0d 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -29,6 +29,10 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o +obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o +obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o +obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o +obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c new file mode 100644 index 000000000000..a8f315902131 --- /dev/null +++ b/drivers/leds/leds-adp5520.c @@ -0,0 +1,230 @@ +/* + * LEDs driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Loosely derived from leds-da903x: + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct adp5520_led { + struct led_classdev cdev; + struct work_struct work; + struct device *master; + enum led_brightness new_brightness; + int id; + int flags; +}; + +static void adp5520_led_work(struct work_struct *work) +{ + struct adp5520_led *led = container_of(work, struct adp5520_led, work); + adp5520_write(led->master, ADP5520_LED1_CURRENT + led->id - 1, + led->new_brightness >> 2); +} + +static void adp5520_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp5520_led *led; + + led = container_of(led_cdev, struct adp5520_led, cdev); + led->new_brightness = value; + schedule_work(&led->work); +} + +static int adp5520_led_setup(struct adp5520_led *led) +{ + struct device *dev = led->master; + int flags = led->flags; + int ret = 0; + + switch (led->id) { + case FLAG_ID_ADP5520_LED1_ADP5501_LED0: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + (flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED1_EN); + break; + case FLAG_ID_ADP5520_LED2_ADP5501_LED1: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 2); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_R3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED2_EN); + break; + case FLAG_ID_ADP5520_LED3_ADP5501_LED2: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 4); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_C3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED3_EN); + break; + } + + return ret; +} + +static int __devinit adp5520_led_prepare(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = pdev->dev.parent; + int ret = 0; + + ret |= adp5520_write(dev, ADP5520_LED1_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED2_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED3_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED_TIME, pdata->led_on_time << 6); + ret |= adp5520_write(dev, ADP5520_LED_FADE, FADE_VAL(pdata->fade_in, + pdata->fade_out)); + + return ret; +} + +static int __devinit adp5520_led_probe(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + if (pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + if (pdata->num_leds > ADP5520_01_MAXLEDS) { + dev_err(&pdev->dev, "can't handle more than %d LEDS\n", + ADP5520_01_MAXLEDS); + return -EFAULT; + } + + led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL); + if (led == NULL) { + dev_err(&pdev->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + ret = adp5520_led_prepare(pdev); + + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + goto err_free; + } + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp5520_led_set; + led_dat->cdev.brightness = LED_OFF; + + if (cur_led->flags & ADP5520_FLAG_LED_MASK) + led_dat->flags = cur_led->flags; + else + led_dat->flags = i + 1; + + led_dat->id = led_dat->flags & ADP5520_FLAG_LED_MASK; + + led_dat->master = pdev->dev.parent; + led_dat->new_brightness = LED_OFF; + + INIT_WORK(&led_dat->work, adp5520_led_work); + + ret = led_classdev_register(led_dat->master, &led_dat->cdev); + if (ret) { + dev_err(&pdev->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp5520_led_setup(led_dat); + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + i++; + goto err; + } + } + + platform_set_drvdata(pdev, led); + return 0; + +err: + if (i > 0) { + for (i = i - 1; i >= 0; i--) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + } + +err_free: + kfree(led); + return ret; +} + +static int __devexit adp5520_led_remove(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led; + int i; + + led = platform_get_drvdata(pdev); + + adp5520_clr_bits(led->master, ADP5520_LED_CONTROL, + ADP5520_LED1_EN | ADP5520_LED2_EN | ADP5520_LED3_EN); + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + kfree(led); + return 0; +} + +static struct platform_driver adp5520_led_driver = { + .driver = { + .name = "adp5520-led", + .owner = THIS_MODULE, + }, + .probe = adp5520_led_probe, + .remove = __devexit_p(adp5520_led_remove), +}; + +static int __init adp5520_led_init(void) +{ + return platform_driver_register(&adp5520_led_driver); +} +module_init(adp5520_led_init); + +static void __exit adp5520_led_exit(void) +{ + platform_driver_unregister(&adp5520_led_driver); +} +module_exit(adp5520_led_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("LEDS ADP5520(01) Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-led"); diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c index 731d4eef3425..f59ffadf5125 100644 --- a/drivers/leds/leds-alix2.c +++ b/drivers/leds/leds-alix2.c @@ -11,11 +11,24 @@ #include #include #include +#include static int force = 0; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); +#define MSR_LBAR_GPIO 0x5140000C +#define CS5535_GPIO_SIZE 256 + +static u32 gpio_base; + +static struct pci_device_id divil_pci[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, + { } /* NULL entry */ +}; +MODULE_DEVICE_TABLE(pci, divil_pci); + struct alix_led { struct led_classdev cdev; unsigned short port; @@ -30,9 +43,9 @@ static void alix_led_set(struct led_classdev *led_cdev, container_of(led_cdev, struct alix_led, cdev); if (brightness) - outl(led_dev->on_value, led_dev->port); + outl(led_dev->on_value, gpio_base + led_dev->port); else - outl(led_dev->off_value, led_dev->port); + outl(led_dev->off_value, gpio_base + led_dev->port); } static struct alix_led alix_leds[] = { @@ -41,7 +54,7 @@ static struct alix_led alix_leds[] = { .name = "alix:1", .brightness_set = alix_led_set, }, - .port = 0x6100, + .port = 0x00, .on_value = 1 << 22, .off_value = 1 << 6, }, @@ -50,7 +63,7 @@ static struct alix_led alix_leds[] = { .name = "alix:2", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 25, .off_value = 1 << 9, }, @@ -59,7 +72,7 @@ static struct alix_led alix_leds[] = { .name = "alix:3", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 27, .off_value = 1 << 11, }, @@ -101,64 +114,104 @@ static struct platform_driver alix_led_driver = { }, }; -static int __init alix_present(void) +static int __init alix_present(unsigned long bios_phys, + const char *alix_sig, + size_t alix_sig_len) { - const unsigned long bios_phys = 0x000f0000; const size_t bios_len = 0x00010000; - const char alix_sig[] = "PC Engines ALIX."; - const size_t alix_sig_len = sizeof(alix_sig) - 1; - const char *bios_virt; const char *scan_end; const char *p; - int ret = 0; + char name[64]; if (force) { printk(KERN_NOTICE "%s: forced to skip BIOS test, " "assume system has ALIX.2 style LEDs\n", KBUILD_MODNAME); - ret = 1; - goto out; + return 1; } bios_virt = phys_to_virt(bios_phys); scan_end = bios_virt + bios_len - (alix_sig_len + 2); for (p = bios_virt; p < scan_end; p++) { const char *tail; + char *a; - if (memcmp(p, alix_sig, alix_sig_len) != 0) { + if (memcmp(p, alix_sig, alix_sig_len) != 0) continue; - } + + memcpy(name, p, sizeof(name)); + + /* remove the first \0 character from string */ + a = strchr(name, '\0'); + if (a) + *a = ' '; + + /* cut the string at a newline */ + a = strchr(name, '\r'); + if (a) + *a = '\0'; tail = p + alix_sig_len; - if ((tail[0] == '2' || tail[0] == '3') && tail[1] == '\0') { + if ((tail[0] == '2' || tail[0] == '3')) { printk(KERN_INFO "%s: system is recognized as \"%s\"\n", - KBUILD_MODNAME, p); - ret = 1; - break; + KBUILD_MODNAME, name); + return 1; } } -out: - return ret; + return 0; } static struct platform_device *pdev; -static int __init alix_led_init(void) +static int __init alix_pci_led_init(void) { - int ret; + u32 low, hi; - if (!alix_present()) { - ret = -ENODEV; - goto out; + if (pci_dev_present(divil_pci) == 0) { + printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n"); + return -ENODEV; } - /* enable output on GPIO for LED 1,2,3 */ - outl(1 << 6, 0x6104); - outl(1 << 9, 0x6184); - outl(1 << 11, 0x6184); + /* Grab the GPIO I/O range */ + rdmsr(MSR_LBAR_GPIO, low, hi); + + /* Check the mask and whether GPIO is enabled (sanity check) */ + if (hi != 0x0000f001) { + printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n"); + return -ENODEV; + } + + /* Mask off the IO base address */ + gpio_base = low & 0x0000ff00; + + if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) { + printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n"); + return -ENODEV; + } + + /* Set GPIO function to output */ + outl(1 << 6, gpio_base + 0x04); + outl(1 << 9, gpio_base + 0x84); + outl(1 << 11, gpio_base + 0x84); + + return 0; +} + +static int __init alix_led_init(void) +{ + int ret = -ENODEV; + const char tinybios_sig[] = "PC Engines ALIX."; + const char coreboot_sig[] = "PC Engines\0ALIX."; + + if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || + alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) + ret = alix_pci_led_init(); + + if (ret < 0) + return ret; pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { @@ -168,7 +221,6 @@ static int __init alix_led_init(void) } else ret = PTR_ERR(pdev); -out: return ret; } @@ -176,6 +228,7 @@ static void __exit alix_led_exit(void) { platform_device_unregister(pdev); platform_driver_unregister(&alix_led_driver); + release_region(gpio_base, CS5535_GPIO_SIZE); } module_init(alix_led_init); diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 8816806accd2..da5fb016b1a5 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -31,7 +31,7 @@ static struct led_classdev qube_front_led = { .name = "qube::front", .brightness = LED_FULL, .brightness_set = qube_front_led_set, - .default_trigger = "ide-disk", + .default_trigger = "default-on", }; static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) @@ -43,7 +43,7 @@ static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index defc212105f3..438d48384636 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -84,7 +84,7 @@ static int __devinit cobalt_raq_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c new file mode 100644 index 000000000000..fee40a841959 --- /dev/null +++ b/drivers/leds/leds-lt3593.c @@ -0,0 +1,217 @@ +/* + * LEDs driver for LT3593 controllers + * + * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf + * + * Copyright (c) 2009 Daniel Mack + * + * Based on leds-gpio.c, + * + * Copyright (C) 2007 8D Technologies inc. + * Raphael Assenat + * Copyright (C) 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct lt3593_led_data { + struct led_classdev cdev; + unsigned gpio; + struct work_struct work; + u8 new_level; +}; + +static void lt3593_led_work(struct work_struct *work) +{ + int pulses; + struct lt3593_led_data *led_dat = + container_of(work, struct lt3593_led_data, work); + + /* + * The LT3593 resets its internal current level register to the maximum + * level on the first falling edge on the control pin. Each following + * falling edge decreases the current level by 625uA. Up to 32 pulses + * can be sent, so the maximum power reduction is 20mA. + * After a timeout of 128us, the value is taken from the register and + * applied is to the output driver. + */ + + if (led_dat->new_level == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + return; + } + + pulses = 32 - (led_dat->new_level * 32) / 255; + + if (pulses == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + mdelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + return; + } + + gpio_set_value_cansleep(led_dat->gpio, 1); + + while (pulses--) { + gpio_set_value_cansleep(led_dat->gpio, 0); + udelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + udelay(1); + } +} + +static void lt3593_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct lt3593_led_data *led_dat = + container_of(led_cdev, struct lt3593_led_data, cdev); + + led_dat->new_level = value; + schedule_work(&led_dat->work); +} + +static int __devinit create_lt3593_led(const struct gpio_led *template, + struct lt3593_led_data *led_dat, struct device *parent) +{ + int ret, state; + + /* skip leds on GPIOs that aren't available */ + if (!gpio_is_valid(template->gpio)) { + printk(KERN_INFO "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n", + KBUILD_MODNAME, template->gpio, template->name); + return 0; + } + + ret = gpio_request(template->gpio, template->name); + if (ret < 0) + return ret; + + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->gpio = template->gpio; + + led_dat->cdev.brightness_set = lt3593_led_set; + + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; + + if (!template->retain_state_suspended) + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + + ret = gpio_direction_output(led_dat->gpio, state); + if (ret < 0) + goto err; + + INIT_WORK(&led_dat->work, lt3593_led_work); + + ret = led_classdev_register(parent, &led_dat->cdev); + if (ret < 0) + goto err; + + printk(KERN_INFO "%s: registered LT3593 LED '%s' at GPIO %d\n", + KBUILD_MODNAME, template->name, template->gpio); + + return 0; + +err: + gpio_free(led_dat->gpio); + return ret; +} + +static void delete_lt3593_led(struct lt3593_led_data *led) +{ + if (!gpio_is_valid(led->gpio)) + return; + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + gpio_free(led->gpio); +} + +static int __devinit lt3593_led_probe(struct platform_device *pdev) +{ + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + int i, ret = 0; + + if (!pdata) + return -EBUSY; + + leds_data = kzalloc(sizeof(struct lt3593_led_data) * pdata->num_leds, + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + + for (i = 0; i < pdata->num_leds; i++) { + ret = create_lt3593_led(&pdata->leds[i], &leds_data[i], + &pdev->dev); + if (ret < 0) + goto err; + } + + platform_set_drvdata(pdev, leds_data); + + return 0; + +err: + for (i = i - 1; i >= 0; i--) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return ret; +} + +static int __devexit lt3593_led_remove(struct platform_device *pdev) +{ + int i; + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + + leds_data = platform_get_drvdata(pdev); + + for (i = 0; i < pdata->num_leds; i++) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return 0; +} + +static struct platform_driver lt3593_led_driver = { + .probe = lt3593_led_probe, + .remove = __devexit_p(lt3593_led_remove), + .driver = { + .name = "leds-lt3593", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS("platform:leds-lt3593"); + +static int __init lt3593_led_init(void) +{ + return platform_driver_register(<3593_led_driver); +} + +static void __exit lt3593_led_exit(void) +{ + platform_driver_unregister(<3593_led_driver); +} + +module_init(lt3593_led_init); +module_exit(lt3593_led_exit); + +MODULE_AUTHOR("Daniel Mack "); +MODULE_DESCRIPTION("LED driver for LT3593 controllers"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index cdfdc8714e10..88b1dd091cfb 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -27,7 +27,6 @@ struct led_pwm_data { struct pwm_device *pwm; unsigned int active_low; unsigned int period; - unsigned int max_brightness; }; static void led_pwm_set(struct led_classdev *led_cdev, @@ -35,7 +34,7 @@ static void led_pwm_set(struct led_classdev *led_cdev, { struct led_pwm_data *led_dat = container_of(led_cdev, struct led_pwm_data, cdev); - unsigned int max = led_dat->max_brightness; + unsigned int max = led_dat->cdev.max_brightness; unsigned int period = led_dat->period; if (brightness == 0) { @@ -77,10 +76,10 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->cdev.name = cur_led->name; led_dat->cdev.default_trigger = cur_led->default_trigger; led_dat->active_low = cur_led->active_low; - led_dat->max_brightness = cur_led->max_brightness; led_dat->period = cur_led->pwm_period_ns; led_dat->cdev.brightness_set = led_pwm_set; led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.max_brightness = cur_led->max_brightness; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&pdev->dev, &led_dat->cdev); diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c new file mode 100644 index 000000000000..7f00de3ef922 --- /dev/null +++ b/drivers/leds/leds-regulator.c @@ -0,0 +1,242 @@ +/* + * leds-regulator.c - LED class driver for regulator driven LEDs. + * + * Copyright (C) 2009 Antonio Ospite + * + * Inspired by leds-wm8350 driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define to_regulator_led(led_cdev) \ + container_of(led_cdev, struct regulator_led, cdev) + +struct regulator_led { + struct led_classdev cdev; + enum led_brightness value; + int enabled; + struct mutex mutex; + struct work_struct work; + + struct regulator *vcc; +}; + +static inline int led_regulator_get_max_brightness(struct regulator *supply) +{ + int ret; + int voltage = regulator_list_voltage(supply, 0); + + if (voltage <= 0) + return 1; + + /* even if regulator can't change voltages, + * we still assume it can change status + * and the LED can be turned on and off. + */ + ret = regulator_set_voltage(supply, voltage, voltage); + if (ret < 0) + return 1; + + return regulator_count_voltages(supply); +} + +static int led_regulator_get_voltage(struct regulator *supply, + enum led_brightness brightness) +{ + if (brightness == 0) + return -EINVAL; + + return regulator_list_voltage(supply, brightness - 1); +} + + +static void regulator_led_enable(struct regulator_led *led) +{ + int ret; + + if (led->enabled) + return; + + ret = regulator_enable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to enable vcc: %d\n", ret); + return; + } + + led->enabled = 1; +} + +static void regulator_led_disable(struct regulator_led *led) +{ + int ret; + + if (!led->enabled) + return; + + ret = regulator_disable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to disable vcc: %d\n", ret); + return; + } + + led->enabled = 0; +} + +static void regulator_led_set_value(struct regulator_led *led) +{ + int voltage; + int ret; + + mutex_lock(&led->mutex); + + if (led->value == LED_OFF) { + regulator_led_disable(led); + goto out; + } + + if (led->cdev.max_brightness > 1) { + voltage = led_regulator_get_voltage(led->vcc, led->value); + dev_dbg(led->cdev.dev, "brightness: %d voltage: %d\n", + led->value, voltage); + + ret = regulator_set_voltage(led->vcc, voltage, voltage); + if (ret != 0) + dev_err(led->cdev.dev, "Failed to set voltage %d: %d\n", + voltage, ret); + } + + regulator_led_enable(led); + +out: + mutex_unlock(&led->mutex); +} + +static void led_work(struct work_struct *work) +{ + struct regulator_led *led; + + led = container_of(work, struct regulator_led, work); + regulator_led_set_value(led); +} + +static void regulator_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct regulator_led *led = to_regulator_led(led_cdev); + + led->value = value; + schedule_work(&led->work); +} + +static int __devinit regulator_led_probe(struct platform_device *pdev) +{ + struct led_regulator_platform_data *pdata = pdev->dev.platform_data; + struct regulator_led *led; + struct regulator *vcc; + int ret = 0; + + if (pdata == NULL) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; + } + + vcc = regulator_get_exclusive(&pdev->dev, "vled"); + if (IS_ERR(vcc)) { + dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name); + return PTR_ERR(vcc); + } + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (led == NULL) { + ret = -ENOMEM; + goto err_vcc; + } + + led->cdev.max_brightness = led_regulator_get_max_brightness(vcc); + if (pdata->brightness > led->cdev.max_brightness) { + dev_err(&pdev->dev, "Invalid default brightness %d\n", + pdata->brightness); + ret = -EINVAL; + goto err_led; + } + led->value = pdata->brightness; + + led->cdev.brightness_set = regulator_led_brightness_set; + led->cdev.name = pdata->name; + led->cdev.flags |= LED_CORE_SUSPENDRESUME; + led->vcc = vcc; + + mutex_init(&led->mutex); + INIT_WORK(&led->work, led_work); + + platform_set_drvdata(pdev, led); + + ret = led_classdev_register(&pdev->dev, &led->cdev); + if (ret < 0) { + cancel_work_sync(&led->work); + goto err_led; + } + + /* to expose the default value to userspace */ + led->cdev.brightness = led->value; + + /* Set the default led status */ + regulator_led_set_value(led); + + return 0; + +err_led: + kfree(led); +err_vcc: + regulator_put(vcc); + return ret; +} + +static int __devexit regulator_led_remove(struct platform_device *pdev) +{ + struct regulator_led *led = platform_get_drvdata(pdev); + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + regulator_led_disable(led); + regulator_put(led->vcc); + kfree(led); + return 0; +} + +static struct platform_driver regulator_led_driver = { + .driver = { + .name = "leds-regulator", + .owner = THIS_MODULE, + }, + .probe = regulator_led_probe, + .remove = __devexit_p(regulator_led_remove), +}; + +static int __init regulator_led_init(void) +{ + return platform_driver_register(®ulator_led_driver); +} +module_init(regulator_led_init); + +static void __exit regulator_led_exit(void) +{ + platform_driver_unregister(®ulator_led_driver); +} +module_exit(regulator_led_exit); + +MODULE_AUTHOR("Antonio Ospite "); +MODULE_DESCRIPTION("Regulator driven LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:leds-regulator"); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c new file mode 100644 index 000000000000..97f04984c1ca --- /dev/null +++ b/drivers/leds/leds-ss4200.c @@ -0,0 +1,556 @@ +/* + * SS4200-E Hardware API + * Copyright (c) 2009, Intel Corporation. + * Copyright IBM Corporation, 2009 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Author: Dave Hansen + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Rodney Girod , Dave Hansen "); +MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver"); +MODULE_LICENSE("GPL"); + +/* + * ICH7 LPC/GPIO PCI Config register offsets + */ +#define PMBASE 0x040 +#define GPIO_BASE 0x048 +#define GPIO_CTRL 0x04c +#define GPIO_EN 0x010 + +/* + * The ICH7 GPIO register block is 64 bytes in size. + */ +#define ICH7_GPIO_SIZE 64 + +/* + * Define register offsets within the ICH7 register block. + */ +#define GPIO_USE_SEL 0x000 +#define GP_IO_SEL 0x004 +#define GP_LVL 0x00c +#define GPO_BLINK 0x018 +#define GPI_INV 0x030 +#define GPIO_USE_SEL2 0x034 +#define GP_IO_SEL2 0x038 +#define GP_LVL2 0x03c + +/* + * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives. + */ +static struct pci_device_id ich7_lpc_pci_id[] = +{ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) }, + { } /* NULL entry */ +}; + +MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id); + +static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id) +{ + pr_info("detected '%s'\n", id->ident); + return 1; +} + +static unsigned int __initdata nodetect; +module_param_named(nodetect, nodetect, bool, 0); +MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection"); + +/* + * struct nas_led_whitelist - List of known good models + * + * Contains the known good models this driver is compatible with. + * When adding a new model try to be as strict as possible. This + * makes it possible to keep the false positives (the model is + * detected as working, but in reality it is not) as low as + * possible. + */ +static struct dmi_system_id __initdata nas_led_whitelist[] = { + { + .callback = ss4200_led_dmi_callback, + .ident = "Intel SS4200-E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00") + } + }, +}; + +/* + * Base I/O address assigned to the Power Management register block + */ +static u32 g_pm_io_base; + +/* + * Base I/O address assigned to the ICH7 GPIO register block + */ +static u32 nas_gpio_io_base; + +/* + * When we successfully register a region, we are returned a resource. + * We use these to identify which regions we need to release on our way + * back out. + */ +static struct resource *gp_gpio_resource; + +struct nasgpio_led { + char *name; + u32 gpio_bit; + struct led_classdev led_cdev; +}; + +/* + * gpio_bit(s) are the ICH7 GPIO bit assignments + */ +static struct nasgpio_led nasgpio_leds[] = { + { .name = "hdd1:blue:sata", .gpio_bit = 0 }, + { .name = "hdd1:amber:sata", .gpio_bit = 1 }, + { .name = "hdd2:blue:sata", .gpio_bit = 2 }, + { .name = "hdd2:amber:sata", .gpio_bit = 3 }, + { .name = "hdd3:blue:sata", .gpio_bit = 4 }, + { .name = "hdd3:amber:sata", .gpio_bit = 5 }, + { .name = "hdd4:blue:sata", .gpio_bit = 6 }, + { .name = "hdd4:amber:sata", .gpio_bit = 7 }, + { .name = "power:blue:power", .gpio_bit = 27}, + { .name = "power:amber:power", .gpio_bit = 28}, +}; + +#define NAS_RECOVERY 0x00000400 /* GPIO10 */ + +static struct nasgpio_led * +led_classdev_to_nasgpio_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct nasgpio_led, led_cdev); +} + +static struct nasgpio_led *get_led_named(char *name) +{ + int i; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + if (strcmp(nasgpio_leds[i].name, name)) + continue; + return &nasgpio_leds[i]; + } + return NULL; +} + +/* + * This protects access to the gpio ports. + */ +static DEFINE_SPINLOCK(nasgpio_gpio_lock); + +/* + * There are two gpio ports, one for blinking and the other + * for power. @port tells us if we're doing blinking or + * power control. + * + * Caller must hold nasgpio_gpio_lock + */ +static void __nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_out; + + gpio_out = inl(nas_gpio_io_base + port); + if (value) + gpio_out |= (1<gpio_bit); + else + gpio_out &= ~(1<gpio_bit); + + outl(gpio_out, nas_gpio_io_base + port); +} + +static void nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + spin_lock(&nasgpio_gpio_lock); + __nasgpio_led_set_attr(led_cdev, port, value); + spin_unlock(&nasgpio_gpio_lock); +} + +u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_in; + + spin_lock(&nasgpio_gpio_lock); + gpio_in = inl(nas_gpio_io_base + port); + spin_unlock(&nasgpio_gpio_lock); + if (gpio_in & (1<gpio_bit)) + return 1; + return 0; +} + +/* + * There is actual brightness control in the hardware, + * but it is via smbus commands and not implemented + * in this driver. + */ +static void nasgpio_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + u32 setting = 0; + if (brightness >= LED_HALF) + setting = 1; + /* + * Hold the lock across both operations. This ensures + * consistency so that both the "turn off blinking" + * and "turn light off" operations complete as a set. + */ + spin_lock(&nasgpio_gpio_lock); + /* + * LED class documentation asks that past blink state + * be disabled when brightness is turned to zero. + */ + if (brightness == 0) + __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0); + __nasgpio_led_set_attr(led_cdev, GP_LVL, setting); + spin_unlock(&nasgpio_gpio_lock); +} + +static int nasgpio_led_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + u32 setting = 1; + if (!(*delay_on == 0 && *delay_off == 0) && + !(*delay_on == 500 && *delay_off == 500)) + return -EINVAL; + /* + * These are very approximate. + */ + *delay_on = 500; + *delay_off = 500; + + nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting); + + return 0; +} + + +/* + * Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have + * already taken care of this, but we will do so in a non destructive manner + * so that we have what we need whether the BIOS did it or not. + */ +static int __devinit ich7_gpio_init(struct device *dev) +{ + int i; + u32 config_data = 0; + u32 all_nas_led = 0; + + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + all_nas_led |= (1<dev, "pci_enable_device failed\n"); + return -EIO; + } + + nas_gpio_pci_dev = dev; + status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base); + if (status) + goto out; + g_pm_io_base &= 0x00000ff80; + + status = pci_read_config_dword(dev, GPIO_CTRL, &gc); + if (!(GPIO_EN & gc)) { + status = -EEXIST; + dev_info(&dev->dev, + "ERROR: The LPC GPIO Block has not been enabled.\n"); + goto out; + } + + status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base); + if (0 > status) { + dev_info(&dev->dev, "Unable to read GPIOBASE.\n"); + goto out; + } + dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base); + nas_gpio_io_base &= 0x00000ffc0; + + /* + * Insure that we have exclusive access to the GPIO I/O address range. + */ + gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE, + KBUILD_MODNAME); + if (NULL == gp_gpio_resource) { + dev_info(&dev->dev, + "ERROR Unable to register GPIO I/O addresses.\n"); + status = -1; + goto out; + } + + /* + * Initialize the GPIO for NAS/Home Server Use + */ + ich7_gpio_init(&dev->dev); + +out: + if (status) { + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); + } + return status; +} + +static void ich7_lpc_remove(struct pci_dev *dev) +{ + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); +} + +/* + * pci_driver structure passed to the PCI modules + */ +static struct pci_driver nas_gpio_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ich7_lpc_pci_id, + .probe = ich7_lpc_probe, + .remove = ich7_lpc_remove, +}; + +static struct led_classdev *get_classdev_for_led_nr(int nr) +{ + struct nasgpio_led *nas_led = &nasgpio_leds[nr]; + struct led_classdev *led = &nas_led->led_cdev; + return led; +} + + +static void set_power_light_amber_noblink(void) +{ + struct nasgpio_led *amber = get_led_named("power:amber:power"); + struct nasgpio_led *blue = get_led_named("power:blue:power"); + + if (!amber || !blue) + return; + /* + * LED_OFF implies disabling future blinking + */ + pr_debug("setting blue off and amber on\n"); + + nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF); + nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL); +} + +static ssize_t nas_led_blink_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led = dev_get_drvdata(dev); + int blinking = 0; + if (nasgpio_led_get_attr(led, GPO_BLINK)) + blinking = 1; + return sprintf(buf, "%u\n", blinking); +} + +static ssize_t nas_led_blink_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int ret; + struct led_classdev *led = dev_get_drvdata(dev); + unsigned long blink_state; + + ret = strict_strtoul(buf, 10, &blink_state); + if (ret) + return ret; + + nasgpio_led_set_attr(led, GPO_BLINK, blink_state); + + return size; +} + +static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store); + +static int register_nasgpio_led(int led_nr) +{ + int ret; + struct nasgpio_led *nas_led = &nasgpio_leds[led_nr]; + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + + led->name = nas_led->name; + led->brightness = LED_OFF; + if (nasgpio_led_get_attr(led, GP_LVL)) + led->brightness = LED_FULL; + led->brightness_set = nasgpio_led_set_brightness; + led->blink_set = nasgpio_led_set_blink; + ret = led_classdev_register(&nas_gpio_pci_dev->dev, led); + if (ret) + return ret; + ret = device_create_file(led->dev, &dev_attr_blink); + if (ret) + led_classdev_unregister(led); + return ret; +} + +static void unregister_nasgpio_led(int led_nr) +{ + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + led_classdev_unregister(led); + device_remove_file(led->dev, &dev_attr_blink); +} +/* + * module load/initialization + */ +static int __init nas_gpio_init(void) +{ + int i; + int ret = 0; + int nr_devices = 0; + + nr_devices = dmi_check_system(nas_led_whitelist); + if (nodetect) { + pr_info("skipping hardware autodetection\n"); + pr_info("Please send 'dmidecode' output to dave@sr71.net\n"); + nr_devices++; + } + + if (nr_devices <= 0) { + pr_info("no LED devices found\n"); + return -ENODEV; + } + + pr_info("registering PCI driver\n"); + ret = pci_register_driver(&nas_gpio_pci_driver); + if (ret) + return ret; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + ret = register_nasgpio_led(i); + if (ret) + goto out_err; + } + /* + * When the system powers on, the BIOS leaves the power + * light blue and blinking. This will turn it solid + * amber once the driver is loaded. + */ + set_power_light_amber_noblink(); + return 0; +out_err: + for (; i >= 0; i--) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); + return ret; +} + +/* + * module unload + */ +static void __exit nas_gpio_exit(void) +{ + int i; + pr_info("Unregistering driver\n"); + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); +} + +module_init(nas_gpio_init); +module_exit(nas_gpio_exit); diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h index afc9f9fd70f5..2618aa9063bc 100644 --- a/include/linux/leds-lp3944.h +++ b/include/linux/leds-lp3944.h @@ -12,9 +12,6 @@ #ifndef __LINUX_LEDS_LP3944_H #define __LINUX_LEDS_LP3944_H -#include -#include - #define LP3944_LED0 0 #define LP3944_LED1 1 #define LP3944_LED2 2 diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h index 96eea90f01a8..f158eb1149aa 100644 --- a/include/linux/leds-pca9532.h +++ b/include/linux/leds-pca9532.h @@ -32,7 +32,7 @@ struct pca9532_led { struct i2c_client *client; char *name; struct led_classdev ldev; - struct work_struct work; + struct work_struct work; enum pca9532_type type; enum pca9532_state state; }; diff --git a/include/linux/leds-regulator.h b/include/linux/leds-regulator.h new file mode 100644 index 000000000000..5a8eb389aab8 --- /dev/null +++ b/include/linux/leds-regulator.h @@ -0,0 +1,46 @@ +/* + * leds-regulator.h - platform data structure for regulator driven LEDs. + * + * Copyright (C) 2009 Antonio Ospite + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_LEDS_REGULATOR_H +#define __LINUX_LEDS_REGULATOR_H + +/* + * Use "vled" as supply id when declaring the regulator consumer: + * + * static struct regulator_consumer_supply pcap_regulator_VVIB_consumers [] = { + * { .dev_name = "leds-regulator.0", supply = "vled" }, + * }; + * + * If you have several regulator driven LEDs, you can append a numerical id to + * .dev_name as done above, and use the same id when declaring the platform + * device: + * + * static struct led_regulator_platform_data a780_vibrator_data = { + * .name = "a780::vibrator", + * }; + * + * static struct platform_device a780_vibrator = { + * .name = "leds-regulator", + * .id = 0, + * .dev = { + * .platform_data = &a780_vibrator_data, + * }, + * }; + */ + +#include + +struct led_regulator_platform_data { + char *name; /* LED name as expected by LED class */ + enum led_brightness brightness; /* initial brightness value */ +}; + +#endif /* __LINUX_LEDS_REGULATOR_H */