diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index b0efd4ca9935..b8a78ab49cdd 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,41 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Thu Jun 29 15:25:18 2006 +# Linux kernel version: 2.6.23-rc6 +# Mon Sep 17 14:21:45 2007 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -44,27 +61,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -86,7 +106,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set @@ -96,11 +116,16 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -108,6 +133,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y # @@ -124,6 +150,7 @@ CONFIG_ARCH_OMAP1=y CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -161,6 +188,14 @@ CONFIG_OMAP_ARM_192MHZ=y # CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_OMAP_ARM_30MHZ is not set +# +# Boot options +# + +# +# Power management +# + # # Processor Type # @@ -171,6 +206,8 @@ CONFIG_CPU_ABRT_EV5TJ=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -180,10 +217,13 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -193,10 +233,13 @@ CONFIG_ARM_THUMB=y # # Kernel Features # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y CONFIG_HZ=128 -# CONFIG_AEABI is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -206,6 +249,10 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -216,6 +263,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # CPU Frequency scaling @@ -251,7 +299,6 @@ CONFIG_FPE_NWFPE=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y # CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set # # Power management options @@ -259,7 +306,10 @@ CONFIG_BINFMT_AOUT=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_APM is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set # # Networking @@ -269,12 +319,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -295,29 +346,20 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -328,7 +370,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -344,7 +385,17 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -357,29 +408,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -387,7 +419,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -396,6 +428,9 @@ CONFIG_ATA_OVER_ETH=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -414,82 +449,42 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -500,24 +495,24 @@ CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -537,8 +532,14 @@ CONFIG_INPUT_EVBUG=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # @@ -574,15 +575,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -590,25 +583,12 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -616,61 +596,70 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# +# CONFIG_W1 is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # -# Misc devices -# - -# -# LED devices +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # CONFIG_NEW_LEDS is not set -# -# LED drivers -# - -# -# LED Triggers -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_OMAP is not set # CONFIG_FB_VIRTUAL is not set # @@ -679,6 +668,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y @@ -691,15 +681,10 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -717,10 +702,10 @@ CONFIG_SOUND=y CONFIG_SOUND_PRIME=y # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -734,18 +719,23 @@ CONFIG_USB_ARCH_HAS_OHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# Real Time Clock -# CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + # # File systems # @@ -753,10 +743,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -787,6 +779,7 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -825,6 +818,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -832,7 +826,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -884,6 +877,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + # # Profiling support # @@ -893,13 +891,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set # CONFIG_DEBUG_USER is not set # @@ -907,12 +906,12 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -921,7 +920,14 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -935,17 +941,22 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig new file mode 100644 index 000000000000..8c1f15c7c45c --- /dev/null +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -0,0 +1,1073 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6 +# Mon Sep 17 14:15:05 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +CONFIG_MACH_OMAP_OSK=y +# CONFIG_OMAP_OSK_MISTRAL is not set +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_OMAP_CF=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_IDE=m +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TPS65010=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_OMAP is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index f6ecdd3a2478..79f0b1f8497b 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -84,11 +84,39 @@ config MACH_OMAP_PALMTE bool "Palm Tungsten E" depends on ARCH_OMAP1 && ARCH_OMAP15XX help - Support for the Palm Tungsten E PDA. Currently only the LCD panel - is supported. To boot the kernel, you'll need a PalmOS compatible - bootloader; check out http://palmtelinux.sourceforge.net for more - information. - Say Y here if you have such a PDA, say NO otherwise. + Support for the Palm Tungsten E PDA. To boot the kernel, you'll + need a PalmOS compatible bootloader; check out + http://palmtelinux.sourceforge.net/ for more information. + Say Y here if you have this PDA model, say N otherwise. + +config MACH_OMAP_PALMZ71 + bool "Palm Zire71" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Palm Zire71 PDA. To boot the kernel, + you'll need a PalmOS compatible bootloader; check out + http://hackndev.com/palm/z71 for more informations. + Say Y here if you have such a PDA, say N otherwise. + +config MACH_OMAP_PALMTT + bool "Palm Tungsten|T" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Palm Tungsten|T PDA. To boot the kernel, you'll + need a PalmOS compatible bootloader (Garux); check out + http://www.hackndev.com/palm/tt/ for more information. + Say Y here if you have this PDA model, say N otherwise. + +config MACH_SX1 + bool "Siemens SX1" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Siemens SX1 phone. To boot the kernel, + you'll need a SX1 compatible bootloader; check out + http://forum.oslik.ru and + http://www.handhelds.org/moin/moin.cgi/SiemensSX1 + for more information. + Say Y here if you have such a phone, say NO otherwise. config MACH_NOKIA770 bool "Nokia 770" diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index a8b9a00cea22..391b6f4827f6 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -22,8 +22,11 @@ obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o +obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o +obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o +obj-$(CONFIG_MACH_SX1) += board-sx1.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 8437d065ada5..c73ca61e585e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -14,6 +14,7 @@ #include #include +#include #include #include @@ -23,6 +24,7 @@ #include #include +#include #include #include #include @@ -31,6 +33,86 @@ static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; +static int ams_delta_keymap[] = { + KEY(0, 0, KEY_F1), /* Advert */ + + KEY(3, 0, KEY_COFFEE), /* Games */ + KEY(2, 0, KEY_QUESTION), /* Directory */ + KEY(3, 2, KEY_CONNECT), /* Internet */ + KEY(2, 1, KEY_SHOP), /* Services */ + KEY(1, 1, KEY_PHONE), /* VoiceMail */ + + KEY(1, 0, KEY_DELETE), /* Delete */ + KEY(2, 2, KEY_PLAY), /* Play */ + KEY(0, 1, KEY_PAGEUP), /* Up */ + KEY(3, 1, KEY_PAGEDOWN), /* Down */ + KEY(0, 2, KEY_EMAIL), /* ReadEmail */ + KEY(1, 2, KEY_STOP), /* Stop */ + + /* Numeric keypad portion */ + KEY(7, 0, KEY_KP1), + KEY(6, 0, KEY_KP2), + KEY(5, 0, KEY_KP3), + KEY(7, 1, KEY_KP4), + KEY(6, 1, KEY_KP5), + KEY(5, 1, KEY_KP6), + KEY(7, 2, KEY_KP7), + KEY(6, 2, KEY_KP8), + KEY(5, 2, KEY_KP9), + KEY(6, 3, KEY_KP0), + KEY(7, 3, KEY_KPASTERISK), + KEY(5, 3, KEY_KPDOT), /* # key */ + KEY(2, 7, KEY_NUMLOCK), /* Mute */ + KEY(1, 7, KEY_KPMINUS), /* Recall */ + KEY(1, 6, KEY_KPPLUS), /* Redial */ + KEY(6, 7, KEY_KPSLASH), /* Handsfree */ + KEY(0, 6, KEY_ENTER), /* Video */ + + KEY(4, 7, KEY_CAMERA), /* Photo */ + + KEY(4, 0, KEY_F2), /* Home */ + KEY(4, 1, KEY_F3), /* Office */ + KEY(4, 2, KEY_F4), /* Mobile */ + KEY(7, 7, KEY_F5), /* SMS */ + KEY(5, 7, KEY_F6), /* Email */ + + /* QWERTY portion of keypad */ + KEY(4, 3, KEY_Q), + KEY(3, 3, KEY_W), + KEY(2, 3, KEY_E), + KEY(1, 3, KEY_R), + KEY(0, 3, KEY_T), + KEY(7, 4, KEY_Y), + KEY(6, 4, KEY_U), + KEY(5, 4, KEY_I), + KEY(4, 4, KEY_O), + KEY(3, 4, KEY_P), + + KEY(2, 4, KEY_A), + KEY(1, 4, KEY_S), + KEY(0, 4, KEY_D), + KEY(7, 5, KEY_F), + KEY(6, 5, KEY_G), + KEY(5, 5, KEY_H), + KEY(4, 5, KEY_J), + KEY(3, 5, KEY_K), + KEY(2, 5, KEY_L), + + KEY(1, 5, KEY_Z), + KEY(0, 5, KEY_X), + KEY(7, 6, KEY_C), + KEY(6, 6, KEY_V), + KEY(5, 6, KEY_B), + KEY(4, 6, KEY_N), + KEY(3, 6, KEY_M), + KEY(2, 6, KEY_SPACE), + + KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */ + KEY(3, 7, KEY_LEFTCTRL), /* Vol down */ + + 0 +}; + void ams_delta_latch1_write(u8 mask, u8 value) { ams_delta_latch1_reg &= ~mask; @@ -76,6 +158,10 @@ static struct map_desc ams_delta_io_desc[] __initdata = { } }; +static struct omap_lcd_config ams_delta_lcd_config __initdata = { + .ctrl_name = "internal", +}; + static struct omap_uart_config ams_delta_uart_config __initdata = { .enabled_uarts = 1, }; @@ -87,16 +173,50 @@ static struct omap_usb_config ams_delta_usb_config __initdata = { }; static struct omap_board_config_kernel ams_delta_config[] = { + { OMAP_TAG_LCD, &ams_delta_lcd_config }, { OMAP_TAG_UART, &ams_delta_uart_config }, { OMAP_TAG_USB, &ams_delta_usb_config }, }; +static struct resource ams_delta_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data ams_delta_kp_data = { + .rows = 8, + .cols = 8, + .keymap = ams_delta_keymap, + .keymapsize = ARRAY_SIZE(ams_delta_keymap), + .delay = 9, +}; + +static struct platform_device ams_delta_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &ams_delta_kp_data, + }, + .num_resources = ARRAY_SIZE(ams_delta_kp_resources), + .resource = ams_delta_kp_resources, +}; + +static struct platform_device ams_delta_lcd_device = { + .name = "lcd_ams_delta", + .id = -1, +}; + static struct platform_device ams_delta_led_device = { .name = "ams-delta-led", .id = -1 }; static struct platform_device *ams_delta_devices[] __initdata = { + &ams_delta_kp_device, + &ams_delta_lcd_device, &ams_delta_led_device, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 48c8c9195dc3..d901dcbe8066 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -139,6 +139,66 @@ static struct platform_device h2_nor_device = { .resource = &h2_nor_resource, }; +#if 0 /* REVISIT: Enable when nand_platform_data is applied */ + +static struct mtd_partition h2_nand_partitions[] = { +#if 0 + /* REVISIT: enable these partitions if you make NAND BOOT + * work on your H2 (rev C or newer); published versions of + * x-load only support P2 and H3. + */ + { + .name = "xloader", + .offset = 0, + .size = 64 * 1024, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "bootloader", + .offset = MTDPART_OFS_APPEND, + .size = 256 * 1024, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 192 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 2 * SZ_1M, + }, +#endif + { + .name = "filesystem", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ +static struct nand_platform_data h2_nand_data = { + .options = NAND_SAMSUNG_LP_OPTIONS, + .parts = h2_nand_partitions, + .nr_parts = ARRAY_SIZE(h2_nand_partitions), +}; + +static struct resource h2_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device h2_nand_device = { + .name = "omapnand", + .id = 0, + .dev = { + .platform_data = &h2_nand_data, + }, + .num_resources = 1, + .resource = &h2_nand_resource, +}; +#endif + static struct resource h2_smc91x_resources[] = { [0] = { .start = OMAP1610_ETHR_START, /* Physical */ @@ -218,11 +278,15 @@ static struct resource h2_irda_resources[] = { .flags = IORESOURCE_IRQ, }, }; + +static u64 irda_dmamask = 0xffffffff; + static struct platform_device h2_irda_device = { .name = "omapirda", .id = 0, .dev = { .platform_data = &h2_irda_data, + .dma_mask = &irda_dmamask, }, .num_resources = ARRAY_SIZE(h2_irda_resources), .resource = h2_irda_resources, @@ -270,6 +334,7 @@ static struct platform_device h2_mcbsp1_device = { static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, + //&h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, @@ -333,6 +398,13 @@ static struct omap_board_config_kernel h2_config[] __initdata = { { OMAP_TAG_LCD, &h2_lcd_config }, }; +#define H2_NAND_RB_GPIO_PIN 62 + +static int h2_nand_dev_ready(struct nand_platform_data *data) +{ + return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN); +} + static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped @@ -347,6 +419,13 @@ static void __init h2_init(void) h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); h2_nor_resource.end += SZ_32M - 1; +#if 0 /* REVISIT: Enable when nand_platform_data is applied */ + h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; + h2_nand_resource.end += SZ_4K - 1; + if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN))) + h2_nand_data.dev_ready = h2_nand_dev_ready; +#endif + omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 79d4ef4c54d4..4167f3480974 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -44,6 +44,8 @@ #include #include #include +#include +#include extern int omap_gpio_init(void); @@ -351,11 +353,14 @@ static struct resource h3_irda_resources[] = { }, }; +static u64 irda_dmamask = 0xffffffff; + static struct platform_device h3_irda_device = { .name = "omapirda", .id = 0, .dev = { .platform_data = &h3_irda_data, + .dma_mask = &irda_dmamask, }, .num_resources = ARRAY_SIZE(h3_irda_resources), .resource = h3_irda_resources, @@ -366,6 +371,41 @@ static struct platform_device h3_lcd_device = { .id = -1, }; +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(15), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), + + .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, + //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "H3 TSC2101", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, // tsc2101_configure, + .codec_set_samplerate = NULL, // tsc2101_set_samplerate, + .codec_clock_setup = NULL, // tsc2101_clock_setup, + .codec_clock_on = NULL, // tsc2101_clock_on, + .codec_clock_off = NULL, // tsc2101_clock_off, + .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, +}; + +static struct platform_device h3_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, @@ -374,6 +414,7 @@ static struct platform_device *devices[] __initdata = { &h3_irda_device, &h3_kp_device, &h3_lcd_device, + &h3_mcbsp1_device, }; static struct omap_usb_config h3_usb_config __initdata = { diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 70014f751bc4..22db19a53647 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -33,6 +33,12 @@ #include #include #include +#include +#include + +#include "../plat-omap/dsp/dsp_common.h" + +#define ADS7846_PENDOWN_GPIO 15 static void __init omap_nokia770_init_irq(void) { @@ -91,9 +97,44 @@ static struct platform_device nokia770_kp_device = { }; static struct platform_device *nokia770_devices[] __initdata = { - &nokia770_kp_device, + &nokia770_kp_device, }; +static void mipid_shutdown(struct mipid_platform_data *pdata) +{ + if (pdata->nreset_gpio != -1) { + printk(KERN_INFO "shutdown LCD\n"); + omap_set_gpio_dataout(pdata->nreset_gpio, 0); + msleep(120); + } +} + +static struct mipid_platform_data nokia770_mipid_platform_data = { + .shutdown = mipid_shutdown, +}; + +static void mipid_dev_init(void) +{ + const struct omap_lcd_config *conf; + + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf != NULL) { + nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio; + nokia770_mipid_platform_data.data_lines = conf->data_lines; + } +} + +static void ads7846_dev_init(void) +{ + if (omap_request_gpio(ADS7846_PENDOWN_GPIO) < 0) + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); +} + +static int ads7846_get_pendown_state(void) +{ + return !omap_get_gpio_datain(ADS7846_PENDOWN_GPIO); +} + static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -101,14 +142,17 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = .pressure_max = 255, .debounce_max = 10, .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, }; static struct spi_board_info nokia770_spi_board_info[] __initdata = { [0] = { - .modalias = "lcd_mipid", + .modalias = "lcd_mipid", .bus_num = 2, .chip_select = 3, .max_speed_hz = 12000000, + .platform_data = &nokia770_mipid_platform_data, }, [1] = { .modalias = "ads7846", @@ -153,6 +197,7 @@ static struct omap_board_config_kernel nokia770_config[] = { { OMAP_TAG_MMC, &nokia770_mmc_config }, }; +#if defined(CONFIG_OMAP_DSP) /* * audio power control */ @@ -183,7 +228,7 @@ static void nokia770_audio_pwr_up(void) clk_enable(dspxor_ck); /* Turn on codec */ - tlv320aic23_power_up(); + aic23_power_up(); if (omap_get_gpio_datain(HEADPHONE_GPIO)) /* HP not connected, turn on amplifier */ @@ -197,7 +242,7 @@ static void codec_delayed_power_down(struct work_struct *work) { down(&audio_pwr_sem); if (audio_pwr_state == -1) - tlv320aic23_power_down(); + aic23_power_down(); clk_disable(dspxor_ck); up(&audio_pwr_sem); } @@ -213,7 +258,8 @@ static void nokia770_audio_pwr_down(void) schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */ } -void nokia770_audio_pwr_up_request(int stage) +static int +nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage) { down(&audio_pwr_sem); if (audio_pwr_state == -1) @@ -221,9 +267,11 @@ void nokia770_audio_pwr_up_request(int stage) /* force audio_pwr_state = 0, even if it was 1. */ audio_pwr_state = 0; up(&audio_pwr_sem); + return 0; } -void nokia770_audio_pwr_down_request(int stage) +static int +nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage) { down(&audio_pwr_sem); switch (stage) { @@ -239,8 +287,39 @@ void nokia770_audio_pwr_down_request(int stage) break; } up(&audio_pwr_sem); + return 0; } +static struct dsp_kfunc_device nokia770_audio_device = { + .name = "audio", + .type = DSP_KFUNC_DEV_TYPE_AUDIO, + .enable = nokia770_audio_pwr_up_request, + .disable = nokia770_audio_pwr_down_request, +}; + +static __init int omap_dsp_init(void) +{ + int ret; + + dspxor_ck = clk_get(0, "dspxor_ck"); + if (IS_ERR(dspxor_ck)) { + printk(KERN_ERR "couldn't acquire dspxor_ck\n"); + return PTR_ERR(dspxor_ck); + } + + ret = dsp_kfunc_device_register(&nokia770_audio_device); + if (ret) { + printk(KERN_ERR + "KFUNC device registration faild: %s\n", + nokia770_audio_device.name); + goto out; + } + return 0; + out: + return ret; +} +#endif /* CONFIG_OMAP_DSP */ + static void __init omap_nokia770_init(void) { nokia770_config[0].data = &nokia770_usb_config; @@ -250,10 +329,11 @@ static void __init omap_nokia770_init(void) ARRAY_SIZE(nokia770_spi_board_info)); omap_board_config = nokia770_config; omap_board_config_size = ARRAY_SIZE(nokia770_config); + omap_gpio_init(); omap_serial_init(); - omap_dsp_audio_pwr_up_request = nokia770_audio_pwr_up_request; - omap_dsp_audio_pwr_down_request = nokia770_audio_pwr_down_request; - dspxor_ck = clk_get(0, "dspxor_ck"); + omap_dsp_init(); + ads7846_dev_init(); + mipid_dev_init(); } static void __init omap_nokia770_map_io(void) diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e7130293a03f..1825781f4354 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -292,6 +293,18 @@ static struct platform_device osk5912_kp_device = { .resource = osk5912_kp_resources, }; +static struct omap_backlight_config mistral_bl_data = { + .default_intensity = 0xa0, +}; + +static struct platform_device mistral_bl_device = { + .name = "omap-bl", + .id = -1, + .dev = { + .platform_data = &mistral_bl_data, + }, +}; + static struct platform_device osk5912_lcd_device = { .name = "lcd_osk", .id = -1, @@ -299,6 +312,7 @@ static struct platform_device osk5912_lcd_device = { static struct platform_device *mistral_devices[] __initdata = { &osk5912_kp_device, + &mistral_bl_device, &osk5912_lcd_device, }; @@ -342,6 +356,38 @@ static void __init osk_mistral_init(void) * can't talk to the ads or even the i2c eeprom. */ + /* parallel camera interface */ + omap_cfg_reg(J15_1610_CAM_LCLK); + omap_cfg_reg(J18_1610_CAM_D7); + omap_cfg_reg(J19_1610_CAM_D6); + omap_cfg_reg(J14_1610_CAM_D5); + omap_cfg_reg(K18_1610_CAM_D4); + omap_cfg_reg(K19_1610_CAM_D3); + omap_cfg_reg(K15_1610_CAM_D2); + omap_cfg_reg(K14_1610_CAM_D1); + omap_cfg_reg(L19_1610_CAM_D0); + omap_cfg_reg(L18_1610_CAM_VS); + omap_cfg_reg(L15_1610_CAM_HS); + omap_cfg_reg(M19_1610_CAM_RSTZ); + omap_cfg_reg(Y15_1610_CAM_OUTCLK); + + /* serial camera interface */ + omap_cfg_reg(H19_1610_CAM_EXCLK); + omap_cfg_reg(W13_1610_CCP_CLKM); + omap_cfg_reg(Y12_1610_CCP_CLKP); + /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */ + // omap_cfg_reg(Y14_1610_CCP_DATAM); + omap_cfg_reg(W14_1610_CCP_DATAP); + + /* CAM_PWDN */ + if (omap_request_gpio(11) == 0) { + omap_cfg_reg(N20_1610_GPIO11); + omap_set_gpio_direction(11, 0 /* out */); + omap_set_gpio_dataout(11, 0 /* off */); + } else + pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); + + // omap_cfg_reg(P19_1610_GPIO6); // BUSY omap_cfg_reg(P20_1610_GPIO4); // PENIRQ set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); @@ -372,6 +418,15 @@ static void __init osk_mistral_init(void) } else printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); + /* LCD: backlight, and power; power controls other devices on the + * board, like the touchscreen, EEPROM, and wakeup (!) switch. + */ + omap_cfg_reg(PWL); + if (omap_request_gpio(2) == 0) { + omap_set_gpio_direction(2, 0 /* out */); + omap_set_gpio_dataout(2, 1 /* on */); + } + platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices)); } #else diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 015824185629..2f9d00a00135 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -17,49 +17,189 @@ #include #include +#include #include -#include -#include +#include +#include +#include +#include +#include +#include #include #include #include #include +#include #include #include #include +#include +#include #include +#include +#include #include +#include +#include -static void __init omap_generic_init_irq(void) +static void __init omap_palmte_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); + omap_gpio_init(); } +static int palmte_keymap[] = { + KEY(0, 0, KEY_F1), + KEY(0, 1, KEY_F2), + KEY(0, 2, KEY_F3), + KEY(0, 3, KEY_F4), + KEY(0, 4, KEY_POWER), + KEY(1, 0, KEY_LEFT), + KEY(1, 1, KEY_DOWN), + KEY(1, 2, KEY_UP), + KEY(1, 3, KEY_RIGHT), + KEY(1, 4, KEY_CENTER), + 0, +}; + +static struct omap_kp_platform_data palmte_kp_data = { + .rows = 8, + .cols = 8, + .keymap = palmte_keymap, + .rep = 1, + .delay = 12, +}; + +static struct resource palmte_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device palmte_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &palmte_kp_data, + }, + .num_resources = ARRAY_SIZE(palmte_kp_resources), + .resource = palmte_kp_resources, +}; + +static struct mtd_partition palmte_rom_partitions[] = { + /* PalmOS "Small ROM", contains the bootloader and the debugger */ + { + .name = "smallrom", + .offset = 0, + .size = 0xa000, + .mask_flags = MTD_WRITEABLE, + }, + /* PalmOS "Big ROM", a filesystem with all the OS code and data */ + { + .name = "bigrom", + .offset = SZ_128K, + /* + * 0x5f0000 bytes big in the multi-language ("EFIGS") version, + * 0x7b0000 bytes in the English-only ("enUS") version. + */ + .size = 0x7b0000, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct flash_platform_data palmte_rom_data = { + .map_name = "map_rom", + .width = 2, + .parts = palmte_rom_partitions, + .nr_parts = ARRAY_SIZE(palmte_rom_partitions), +}; + +static struct resource palmte_rom_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device palmte_rom_device = { + .name = "omapflash", + .id = -1, + .dev = { + .platform_data = &palmte_rom_data, + }, + .num_resources = 1, + .resource = &palmte_rom_resource, +}; + static struct platform_device palmte_lcd_device = { .name = "lcd_palmte", .id = -1, }; +static struct omap_backlight_config palmte_backlight_config = { + .default_intensity = 0xa0, +}; + +static struct platform_device palmte_backlight_device = { + .name = "omap-bl", + .id = -1, + .dev = { + .platform_data = &palmte_backlight_config, + }, +}; + +static struct omap_irda_config palmte_irda_config = { + .transceiver_cap = IR_SIRMODE, + .rx_channel = OMAP_DMA_UART3_RX, + .tx_channel = OMAP_DMA_UART3_TX, + .dest_start = UART3_THR, + .src_start = UART3_RHR, + .tx_trigger = 0, + .rx_trigger = 0, +}; + +static struct resource palmte_irda_resources[] = { + [0] = { + .start = INT_UART3, + .end = INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device palmte_irda_device = { + .name = "omapirda", + .id = -1, + .dev = { + .platform_data = &palmte_irda_config, + }, + .num_resources = ARRAY_SIZE(palmte_irda_resources), + .resource = palmte_irda_resources, +}; + static struct platform_device *devices[] __initdata = { + &palmte_rom_device, + &palmte_kp_device, &palmte_lcd_device, + &palmte_backlight_device, + &palmte_irda_device, }; static struct omap_usb_config palmte_usb_config __initdata = { - .register_dev = 1, + .register_dev = 1, /* Mini-B only receptacle */ .hmc_mode = 0, - .pins[0] = 3, + .pins[0] = 2, }; static struct omap_mmc_config palmte_mmc_config __initdata = { - .mmc [0] = { + .mmc[0] = { .enabled = 1, - .wire4 = 1, - .wp_pin = OMAP_MPUIO(3), - .power_pin = -1, - .switch_pin = -1, + .wp_pin = PALMTE_MMC_WP_GPIO, + .power_pin = PALMTE_MMC_POWER_GPIO, + .switch_pin = PALMTE_MMC_SWITCH_GPIO, }, }; @@ -67,21 +207,222 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmte_config[] = { - { OMAP_TAG_USB, &palmte_usb_config }, - { OMAP_TAG_MMC, &palmte_mmc_config }, - { OMAP_TAG_LCD, &palmte_lcd_config }, +static struct omap_uart_config palmte_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static void __init omap_generic_init(void) +static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = { + .spcr2 = FRST | GRST | XRST | XINTM(3), + .xcr2 = XDATDLY(1) | XFIG, + .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32), + .pcr0 = SCLKME | FSXP | CLKXP, +}; + +static struct omap_alsa_codec_config palmte_alsa_config = { + .name = "TSC2102 audio", + .mcbsp_regs_alsa = &palmte_mcbsp1_regs, + .codec_configure_dev = NULL, /* tsc2102_configure, */ + .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2102_clock_setup, */ + .codec_clock_on = NULL, /* tsc2102_clock_on, */ + .codec_clock_off = NULL, /* tsc2102_clock_off, */ + .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */ +}; + +#ifdef CONFIG_APM +/* + * Values measured in 10 minute intervals averaged over 10 samples. + * May differ slightly from device to device but should be accurate + * enough to give basic idea of battery life left and trigger + * potential alerts. + */ +static const int palmte_battery_sample[] = { + 2194, 2157, 2138, 2120, + 2104, 2089, 2075, 2061, + 2048, 2038, 2026, 2016, + 2008, 1998, 1989, 1980, + 1970, 1958, 1945, 1928, + 1910, 1888, 1860, 1827, + 1791, 1751, 1709, 1656, +}; + +#define INTERVAL 10 +#define BATTERY_HIGH_TRESHOLD 66 +#define BATTERY_LOW_TRESHOLD 33 + +static void palmte_get_power_status(struct apm_power_info *info, int *battery) +{ + int charging, batt, hi, lo, mid; + + charging = !omap_get_gpio_datain(PALMTE_DC_GPIO); + batt = battery[0]; + if (charging) + batt -= 60; + + hi = ARRAY_SIZE(palmte_battery_sample); + lo = 0; + + info->battery_flag = 0; + info->units = APM_UNITS_MINS; + + if (batt > palmte_battery_sample[lo]) { + info->battery_life = 100; + info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample); + } else if (batt <= palmte_battery_sample[hi - 1]) { + info->battery_life = 0; + info->time = 0; + } else { + while (hi > lo + 1) { + mid = (hi + lo) >> 2; + if (batt <= palmte_battery_sample[mid]) + lo = mid; + else + hi = mid; + } + + mid = palmte_battery_sample[lo] - palmte_battery_sample[hi]; + hi = palmte_battery_sample[lo] - batt; + info->battery_life = 100 - (100 * lo + 100 * hi / mid) / + ARRAY_SIZE(palmte_battery_sample); + info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) - + lo) - INTERVAL * hi / mid; + } + + if (charging) { + info->ac_line_status = APM_AC_ONLINE; + info->battery_status = APM_BATTERY_STATUS_CHARGING; + info->battery_flag |= APM_BATTERY_FLAG_CHARGING; + } else { + info->ac_line_status = APM_AC_OFFLINE; + if (info->battery_life > BATTERY_HIGH_TRESHOLD) + info->battery_status = APM_BATTERY_STATUS_HIGH; + else if (info->battery_life > BATTERY_LOW_TRESHOLD) + info->battery_status = APM_BATTERY_STATUS_LOW; + else + info->battery_status = APM_BATTERY_STATUS_CRITICAL; + } + + if (info->battery_life > BATTERY_HIGH_TRESHOLD) + info->battery_flag |= APM_BATTERY_FLAG_HIGH; + else if (info->battery_life > BATTERY_LOW_TRESHOLD) + info->battery_flag |= APM_BATTERY_FLAG_LOW; + else + info->battery_flag |= APM_BATTERY_FLAG_CRITICAL; +} +#else +#define palmte_get_power_status NULL +#endif + +static struct tsc2102_config palmte_tsc2102_config = { + .use_internal = 0, + .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP, + .temp_at25c = { 2200, 2615 }, + .apm_report = palmte_get_power_status, + .alsa_config = &palmte_alsa_config, +}; + +static struct omap_board_config_kernel palmte_config[] = { + { OMAP_TAG_USB, &palmte_usb_config }, + { OMAP_TAG_MMC, &palmte_mmc_config }, + { OMAP_TAG_LCD, &palmte_lcd_config }, + { OMAP_TAG_UART, &palmte_uart_config }, +}; + +static struct spi_board_info palmte_spi_info[] __initdata = { + { + .modalias = "tsc2102", + .bus_num = 2, /* uWire (officially) */ + .chip_select = 0, /* As opposed to 3 */ + .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), + .platform_data = &palmte_tsc2102_config, + .max_speed_hz = 8000000, + }, +}; + +/* Periodically check for changes on important input pins */ +struct timer_list palmte_pin_timer; +int prev_power, prev_headphones; + +static void palmte_pin_handler(unsigned long data) { + int power, headphones; + + power = !omap_get_gpio_datain(PALMTE_DC_GPIO); + headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); + + if (power && !prev_power) + printk(KERN_INFO "PM: cable connected\n"); + else if (!power && prev_power) + printk(KERN_INFO "PM: cable disconnected\n"); + + if (headphones && !prev_headphones) { + /* Headphones connected, disable speaker */ + omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0); + printk(KERN_INFO "PM: speaker off\n"); + } else if (!headphones && prev_headphones) { + /* Headphones unplugged, re-enable speaker */ + omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1); + printk(KERN_INFO "PM: speaker on\n"); + } + + prev_power = power; + prev_headphones = headphones; + mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500)); +} + +static void __init palmte_gpio_setup(void) +{ + /* Set TSC2102 PINTDAV pin as input */ + if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) { + printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); + return; + } + omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1); + + /* Monitor cable-connected signals */ + if (omap_request_gpio(PALMTE_DC_GPIO) || + omap_request_gpio(PALMTE_USB_OR_DC_GPIO) || + omap_request_gpio(PALMTE_USBDETECT_GPIO)) { + printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); + return; + } + omap_set_gpio_direction(PALMTE_DC_GPIO, 1); + omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1); + omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1); + + /* Set speaker-enable pin as output */ + if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) { + printk(KERN_ERR "Could not reserve speaker GPIO!\n"); + return; + } + omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0); + + /* Monitor the headphones-connected signal */ + if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) { + printk(KERN_ERR "Could not reserve headphones signal GPIO!\n"); + return; + } + omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1); + + prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO); + prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); + setup_timer(&palmte_pin_timer, palmte_pin_handler, 0); + palmte_pin_handler(0); +} + +static void __init omap_palmte_init(void) { omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); platform_add_devices(devices, ARRAY_SIZE(devices)); + + spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); + + omap_serial_init(); + palmte_gpio_setup(); } -static void __init omap_generic_map_io(void) +static void __init omap_palmte_map_io(void) { omap1_map_common_io(); } @@ -90,8 +431,8 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .phys_io = 0xfff00000, .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, - .map_io = omap_generic_map_io, - .init_irq = omap_generic_init_irq, - .init_machine = omap_generic_init, + .map_io = omap_palmte_map_io, + .init_irq = omap_palmte_init_irq, + .init_machine = omap_palmte_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c new file mode 100644 index 000000000000..e47010fec275 --- /dev/null +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -0,0 +1,357 @@ +/* + * linux/arch/arm/mach-omap1/board-palmtt.c + * + * Modified from board-palmtt2.c + * + * Modified and amended for Palm Tungsten|T + * by Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static int palmtt_keymap[] = { + KEY(0, 0, KEY_ESC), + KEY(0, 1, KEY_SPACE), + KEY(0, 2, KEY_LEFTCTRL), + KEY(0, 3, KEY_TAB), + KEY(0, 4, KEY_ENTER), + KEY(1, 0, KEY_LEFT), + KEY(1, 1, KEY_DOWN), + KEY(1, 2, KEY_UP), + KEY(1, 3, KEY_RIGHT), + KEY(2, 0, KEY_SLEEP), + KEY(2, 4, KEY_Y), + 0 +}; + +static struct mtd_partition palmtt_partitions[] = { + { + .name = "write8k", + .offset = 0, + .size = SZ_8K, + .mask_flags = 0, + }, + { + .name = "PalmOS-BootLoader(ro)", + .offset = SZ_8K, + .size = 7 * SZ_8K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = 8 * SZ_8K, + .mask_flags = 0, + }, + { + .name = "PalmOS-FS(ro)", + .offset = MTDPART_OFS_APPEND, + .size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "u-boot(rez)", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0 + }, + { + .name = "empty", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data palmtt_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = palmtt_partitions, + .nr_parts = ARRAY_SIZE(palmtt_partitions), +}; + +static struct resource palmtt_flash_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device palmtt_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &palmtt_flash_data, + }, + .num_resources = 1, + .resource = &palmtt_flash_resource, +}; + +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | + RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | + XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | + FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "PalmTT AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, // aic23_configure, + .codec_set_samplerate = NULL, // aic23_set_samplerate, + .codec_clock_setup = NULL, // aic23_clock_setup, + .codec_clock_on = NULL, // aic23_clock_on, + .codec_clock_off = NULL, // aic23_clock_off, + .get_default_samplerate = NULL, // aic23_get_default_samplerate, +}; + +static struct platform_device palmtt_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + +static struct resource palmtt_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data palmtt_kp_data = { + .rows = 6, + .cols = 3, + .keymap = palmtt_keymap, +}; + +static struct platform_device palmtt_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &palmtt_kp_data, + }, + .num_resources = ARRAY_SIZE(palmtt_kp_resources), + .resource = palmtt_kp_resources, +}; + +static struct platform_device palmtt_lcd_device = { + .name = "lcd_palmtt", + .id = -1, +}; +static struct omap_irda_config palmtt_irda_config = { + .transceiver_cap = IR_SIRMODE, + .rx_channel = OMAP_DMA_UART3_RX, + .tx_channel = OMAP_DMA_UART3_TX, + .dest_start = UART3_THR, + .src_start = UART3_RHR, + .tx_trigger = 0, + .rx_trigger = 0, +}; + +static struct resource palmtt_irda_resources[] = { + [0] = { + .start = INT_UART3, + .end = INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device palmtt_irda_device = { + .name = "omapirda", + .id = -1, + .dev = { + .platform_data = &palmtt_irda_config, + }, + .num_resources = ARRAY_SIZE(palmtt_irda_resources), + .resource = palmtt_irda_resources, +}; + +static struct platform_device palmtt_spi_device = { + .name = "spi_palmtt", + .id = -1, +}; + +static struct omap_backlight_config palmtt_backlight_config = { + .default_intensity = 0xa0, +}; + +static struct platform_device palmtt_backlight_device = { + .name = "omap-bl", + .id = -1, + .dev = { + .platform_data= &palmtt_backlight_config, + }, +}; + +static struct omap_led_config palmtt_led_config[] = { + { + .cdev = { + .name = "palmtt:led0", + }, + .gpio = PALMTT_LED_GPIO, + }, +}; + +static struct omap_led_platform_data palmtt_led_data = { + .nr_leds = ARRAY_SIZE(palmtt_led_config), + .leds = palmtt_led_config, +}; + +static struct platform_device palmtt_led_device = { + .name = "omap-led", + .id = -1, + .dev = { + .platform_data = &palmtt_led_data, + }, +}; + +static struct platform_device *palmtt_devices[] __initdata = { + &palmtt_flash_device, + &palmtt_mcbsp1_device, + &palmtt_kp_device, + &palmtt_lcd_device, + &palmtt_irda_device, + &palmtt_spi_device, + &palmtt_backlight_device, + &palmtt_led_device, +}; + +static int palmtt_get_pendown_state(void) +{ + return !omap_get_gpio_datain(6); +} + +static const struct ads7846_platform_data palmtt_ts_info = { + .model = 7846, + .vref_delay_usecs = 100, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .get_pendown_state = palmtt_get_pendown_state, +}; + +static struct spi_board_info __initdata palmtt_boardinfo[] = { + { + /* MicroWire (bus 2) CS0 has an ads7846e */ + .modalias = "ads7846", + .platform_data = &palmtt_ts_info, + .irq = OMAP_GPIO_IRQ(6), + .max_speed_hz = 120000 /* max sample rate at 3V */ + * 26 /* command + data + overhead */, + .bus_num = 2, + .chip_select = 0, + } +}; + +static void __init omap_palmtt_init_irq(void) +{ + omap1_init_common_hw(); + omap_init_irq(); +} + +static struct omap_usb_config palmtt_usb_config __initdata = { + .register_dev = 1, + .hmc_mode = 0, + .pins[0] = 2, +}; + +static struct omap_lcd_config palmtt_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_uart_config palmtt_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), +}; + +static struct omap_board_config_kernel palmtt_config[] = { + { OMAP_TAG_USB, &palmtt_usb_config }, + { OMAP_TAG_LCD, &palmtt_lcd_config }, + { OMAP_TAG_UART, &palmtt_uart_config }, +}; + +static void __init omap_mpu_wdt_mode(int mode) { + if (mode) + omap_writew(0x8000, OMAP_WDT_TIMER_MODE); + else { + omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); + omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); + } +} + +static void __init omap_palmtt_init(void) +{ + omap_mpu_wdt_mode(0); + + omap_board_config = palmtt_config; + omap_board_config_size = ARRAY_SIZE(palmtt_config); + + platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); + + spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); + omap_serial_init(); +} + +static void __init omap_palmtt_map_io(void) +{ + omap1_map_common_io(); +} + +MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_palmtt_map_io, + .init_irq = omap_palmtt_init_irq, + .init_machine = omap_palmtt_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c new file mode 100644 index 000000000000..c275d517764a --- /dev/null +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -0,0 +1,383 @@ +/* + * linux/arch/arm/mach-omap1/board-palmz71.c + * + * Modified from board-generic.c + * + * Support for the Palm Zire71 PDA. + * + * Original version : Laurent Gonzalez + * + * Modified for zire71 : Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static void __init +omap_palmz71_init_irq(void) +{ + omap1_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static int palmz71_keymap[] = { + KEY(0, 0, KEY_F1), + KEY(0, 1, KEY_F2), + KEY(0, 2, KEY_F3), + KEY(0, 3, KEY_F4), + KEY(0, 4, KEY_POWER), + KEY(1, 0, KEY_LEFT), + KEY(1, 1, KEY_DOWN), + KEY(1, 2, KEY_UP), + KEY(1, 3, KEY_RIGHT), + KEY(1, 4, KEY_CENTER), + KEY(2, 0, KEY_CAMERA), + 0, +}; + +static struct omap_kp_platform_data palmz71_kp_data = { + .rows = 8, + .cols = 8, + .keymap = palmz71_keymap, + .rep = 1, + .delay = 80, +}; + +static struct resource palmz71_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device palmz71_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &palmz71_kp_data, + }, + .num_resources = ARRAY_SIZE(palmz71_kp_resources), + .resource = palmz71_kp_resources, +}; + +static struct mtd_partition palmz71_rom_partitions[] = { + /* PalmOS "Small ROM", contains the bootloader and the debugger */ + { + .name = "smallrom", + .offset = 0, + .size = 0xa000, + .mask_flags = MTD_WRITEABLE, + }, + /* PalmOS "Big ROM", a filesystem with all the OS code and data */ + { + .name = "bigrom", + .offset = SZ_128K, + /* + * 0x5f0000 bytes big in the multi-language ("EFIGS") version, + * 0x7b0000 bytes in the English-only ("enUS") version. + */ + .size = 0x7b0000, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct flash_platform_data palmz71_rom_data = { + .map_name = "map_rom", + .name = "onboardrom", + .width = 2, + .parts = palmz71_rom_partitions, + .nr_parts = ARRAY_SIZE(palmz71_rom_partitions), +}; + +static struct resource palmz71_rom_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device palmz71_rom_device = { + .name = "omapflash", + .id = -1, + .dev = { + .platform_data = &palmz71_rom_data, + }, + .num_resources = 1, + .resource = &palmz71_rom_resource, +}; + +static struct platform_device palmz71_lcd_device = { + .name = "lcd_palmz71", + .id = -1, +}; + +static struct omap_irda_config palmz71_irda_config = { + .transceiver_cap = IR_SIRMODE, + .rx_channel = OMAP_DMA_UART3_RX, + .tx_channel = OMAP_DMA_UART3_TX, + .dest_start = UART3_THR, + .src_start = UART3_RHR, + .tx_trigger = 0, + .rx_trigger = 0, +}; + +static struct resource palmz71_irda_resources[] = { + [0] = { + .start = INT_UART3, + .end = INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device palmz71_irda_device = { + .name = "omapirda", + .id = -1, + .dev = { + .platform_data = &palmz71_irda_config, + }, + .num_resources = ARRAY_SIZE(palmz71_irda_resources), + .resource = palmz71_irda_resources, +}; + +static struct platform_device palmz71_spi_device = { + .name = "spi_palmz71", + .id = -1, +}; + +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "PalmZ71 AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, /* aic23_configure */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate */ + .codec_clock_setup = NULL, /* aic23_clock_setup */ + .codec_clock_on = NULL, /* aic23_clock_on */ + .codec_clock_off = NULL, /* aic23_clock_off */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate */ +}; + +static struct platform_device palmz71_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + +static struct omap_backlight_config palmz71_backlight_config = { + .default_intensity = 0xa0, +}; + +static struct platform_device palmz71_backlight_device = { + .name = "omap-bl", + .id = -1, + .dev = { + .platform_data = &palmz71_backlight_config, + }, +}; + +static struct platform_device *devices[] __initdata = { + &palmz71_rom_device, + &palmz71_kp_device, + &palmz71_mcbsp1_device, + &palmz71_lcd_device, + &palmz71_irda_device, + &palmz71_spi_device, + &palmz71_backlight_device, +}; + +static int +palmz71_get_pendown_state(void) +{ + return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO); +} + +static const struct ads7846_platform_data palmz71_ts_info = { + .model = 7846, + .vref_delay_usecs = 100, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .get_pendown_state = palmz71_get_pendown_state, +}; + +static struct spi_board_info __initdata palmz71_boardinfo[] = { { + /* MicroWire (bus 2) CS0 has an ads7846e */ + .modalias = "ads7846", + .platform_data = &palmz71_ts_info, + .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO), + .max_speed_hz = 120000 /* max sample rate at 3V */ + * 26 /* command + data + overhead */, + .bus_num = 2, + .chip_select = 0, +} }; + +static struct omap_usb_config palmz71_usb_config __initdata = { + .register_dev = 1, /* Mini-B only receptacle */ + .hmc_mode = 0, + .pins[0] = 2, +}; + +static struct omap_mmc_config palmz71_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .wire4 = 0, + .wp_pin = PALMZ71_MMC_WP_GPIO, + .power_pin = -1, + .switch_pin = PALMZ71_MMC_IN_GPIO, + }, +}; + +static struct omap_lcd_config palmz71_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_uart_config palmz71_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), +}; + +static struct omap_board_config_kernel palmz71_config[] = { + {OMAP_TAG_USB, &palmz71_usb_config}, + {OMAP_TAG_MMC, &palmz71_mmc_config}, + {OMAP_TAG_LCD, &palmz71_lcd_config}, + {OMAP_TAG_UART, &palmz71_uart_config}, +}; + +static irqreturn_t +palmz71_powercable(int irq, void *dev_id) +{ + if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) { + printk(KERN_INFO "PM: Power cable connected\n"); + set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), + IRQT_FALLING); + } else { + printk(KERN_INFO "PM: Power cable disconnected\n"); + set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), + IRQT_RISING); + } + return IRQ_HANDLED; +} + +static void __init +omap_mpu_wdt_mode(int mode) +{ + if (mode) + omap_writew(0x8000, OMAP_WDT_TIMER_MODE); + else { + omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); + omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); + } +} + +static void __init +palmz71_gpio_setup(int early) +{ + if (early) { + /* Only set GPIO1 so we have a working serial */ + omap_set_gpio_dataout(1, 1); + omap_set_gpio_direction(1, 0); + } else { + /* Set MMC/SD host WP pin as input */ + if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) { + printk(KERN_ERR "Could not reserve WP GPIO!\n"); + return; + } + omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1); + + /* Monitor the Power-cable-connected signal */ + if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) { + printk(KERN_ERR + "Could not reserve cable signal GPIO!\n"); + return; + } + omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1); + if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), + palmz71_powercable, IRQF_SAMPLE_RANDOM, + "palmz71-cable", 0)) + printk(KERN_ERR + "IRQ request for power cable failed!\n"); + palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0); + } +} + +static void __init +omap_palmz71_init(void) +{ + palmz71_gpio_setup(1); + omap_mpu_wdt_mode(0); + + omap_board_config = palmz71_config; + omap_board_config_size = ARRAY_SIZE(palmz71_config); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + spi_register_board_info(palmz71_boardinfo, + ARRAY_SIZE(palmz71_boardinfo)); + omap_serial_init(); + palmz71_gpio_setup(0); +} + +static void __init +omap_palmz71_map_io(void) +{ + omap1_map_common_io(); +} + +MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100,.map_io = omap_palmz71_map_io, + .init_irq = omap_palmz71_init_irq, + .init_machine = omap_palmz71_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c new file mode 100644 index 000000000000..2743d639aa05 --- /dev/null +++ b/arch/arm/mach-omap1/board-sx1.c @@ -0,0 +1,494 @@ +/* +* linux/arch/arm/mach-omap1/board-sx1.c +* +* Modified from board-generic.c +* +* Support for the Siemens SX1 mobile phone. +* +* Original version : Vladimir Ananiev (Vovan888-at-gmail com) +* +* Maintainters : Vladimir Ananiev (aka Vovan888), Sergge +* oslik.ru +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Write to I2C device */ +int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) +{ + struct i2c_adapter *adap; + int err; + struct i2c_msg msg[1]; + unsigned char data[2]; + + adap = i2c_get_adapter(0); + if (!adap) + return -ENODEV; + msg->addr = devaddr; /* I2C address of chip */ + msg->flags = 0; + msg->len = 2; + msg->buf = data; + data[0] = regoffset; /* register num */ + data[1] = value; /* register data */ + err = i2c_transfer(adap, msg, 1); + if (err >= 0) + return 0; + return err; +} + +/* Read from I2C device */ +int i2c_read_byte(u8 devaddr, u8 regoffset, u8 * value) +{ + struct i2c_adapter *adap; + int err; + struct i2c_msg msg[1]; + unsigned char data[2]; + + adap = i2c_get_adapter(0); + if (!adap) + return -ENODEV; + + msg->addr = devaddr; /* I2C address of chip */ + msg->flags = 0; + msg->len = 1; + msg->buf = data; + data[0] = regoffset; /* register num */ + err = i2c_transfer(adap, msg, 1); + + msg->addr = devaddr; /* I2C address */ + msg->flags = I2C_M_RD; + msg->len = 1; + msg->buf = data; + err = i2c_transfer(adap, msg, 1); + *value = data[0]; + + if (err >= 0) + return 0; + return err; +} +/* set keyboard backlight intensity */ +int sx1_setkeylight(u8 keylight) +{ + if (keylight > SOFIA_MAX_LIGHT_VAL) + keylight = SOFIA_MAX_LIGHT_VAL; + return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); +} +/* get current keylight intensity */ +int sx1_getkeylight(u8 * keylight) +{ + return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); +} +/* set LCD backlight intensity */ +int sx1_setbacklight(u8 backlight) +{ + if (backlight > SOFIA_MAX_LIGHT_VAL) + backlight = SOFIA_MAX_LIGHT_VAL; + return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight); +} +/* get current LCD backlight intensity */ +int sx1_getbacklight (u8 * backlight) +{ + return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight); +} +/* set LCD backlight power on/off */ +int sx1_setmmipower(u8 onoff) +{ + int err; + u8 dat = 0; + err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + if (err < 0) + return err; + if (onoff) + dat |= SOFIA_MMILIGHT_POWER; + else + dat &= ~SOFIA_MMILIGHT_POWER; + return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); +} +/* set MMC power on/off */ +int sx1_setmmcpower(u8 onoff) +{ + int err; + u8 dat = 0; + err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + if (err < 0) + return err; + if (onoff) + dat |= SOFIA_MMC_POWER; + else + dat &= ~SOFIA_MMC_POWER; + return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); +} +/* set USB power on/off */ +int sx1_setusbpower(u8 onoff) +{ + int err; + u8 dat = 0; + err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + if (err < 0) + return err; + if (onoff) + dat |= SOFIA_USB_POWER; + else + dat &= ~SOFIA_USB_POWER; + return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); +} + +EXPORT_SYMBOL(sx1_setkeylight); +EXPORT_SYMBOL(sx1_getkeylight); +EXPORT_SYMBOL(sx1_setbacklight); +EXPORT_SYMBOL(sx1_getbacklight); +EXPORT_SYMBOL(sx1_setmmipower); +EXPORT_SYMBOL(sx1_setmmcpower); +EXPORT_SYMBOL(sx1_setusbpower); + +/*----------- Keypad -------------------------*/ + +static int sx1_keymap[] = { + KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */ + KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */ + KEY(1, 4, GROUP_2 | 114), /* voice memo */ + KEY(2, 4, GROUP_3 | 114), /* voice memo */ + KEY(0, 0, GROUP_1 | KEY_F12), /* red button Qt::Key_Hangup */ + KEY(4, 3, GROUP_1 | KEY_LEFT), + KEY(2, 3, GROUP_1 | KEY_DOWN), + KEY(1, 3, GROUP_1 | KEY_RIGHT), + KEY(0, 3, GROUP_1 | KEY_UP), + KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */ + KEY(5, 0, GROUP_1 | KEY_1), + KEY(4, 0, GROUP_1 | KEY_2), + KEY(3, 0, GROUP_1 | KEY_3), + KEY(3, 4, GROUP_1 | KEY_4), + KEY(4, 4, GROUP_1 | KEY_5), + KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */ + KEY(4, 1, GROUP_1 | KEY_6), + KEY(5, 1, GROUP_1 | KEY_7), + KEY(3, 1, GROUP_1 | KEY_8), + KEY(3, 2, GROUP_1 | KEY_9), + KEY(5, 2, GROUP_1 | KEY_0), + KEY(4, 2, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */ + KEY(0, 1, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */ + KEY(1, 2, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */ + KEY(2, 2, GROUP_1 | KEY_F8), /* right soft Qt::Key_Back */ + KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */ + KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */ + KEY(0, 2, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */ + 0 +}; + +static struct resource sx1_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data sx1_kp_data = { + .rows = 6, + .cols = 6, + .keymap = sx1_keymap, + .keymapsize = ARRAY_SIZE(sx1_keymap), + .delay = 80, +}; + +static struct platform_device sx1_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &sx1_kp_data, + }, + .num_resources = ARRAY_SIZE(sx1_kp_resources), + .resource = sx1_kp_resources, +}; + +/*----------- IRDA -------------------------*/ + +static struct omap_irda_config sx1_irda_data = { + .transceiver_cap = IR_SIRMODE, + .rx_channel = OMAP_DMA_UART3_RX, + .tx_channel = OMAP_DMA_UART3_TX, + .dest_start = UART3_THR, + .src_start = UART3_RHR, + .tx_trigger = 0, + .rx_trigger = 0, +}; + +static struct resource sx1_irda_resources[] = { + [0] = { + .start = INT_UART3, + .end = INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 irda_dmamask = 0xffffffff; + +static struct platform_device sx1_irda_device = { + .name = "omapirda", + .id = 0, + .dev = { + .platform_data = &sx1_irda_data, + .dma_mask = &irda_dmamask, + }, + .num_resources = ARRAY_SIZE(sx1_irda_resources), + .resource = sx1_irda_resources, +}; + +/*----------- McBSP & Sound -------------------------*/ + +/* Playback interface - McBSP1 */ +static struct omap_mcbsp_reg_cfg mcbsp1_regs = { + .spcr2 = XINTM(3), /* SPCR2=30 */ + .spcr1 = RINTM(3), /* SPCR1=30 */ + .rcr2 = 0, /* RCR2 =00 */ + .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */ + .xcr2 = 0, /* XCR2 = 0 */ + .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ + .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ + .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ + .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, + /* PCR0 =0f0f */ +}; + +/* TODO: PCM interface - McBSP2 */ +static struct omap_mcbsp_reg_cfg mcbsp2_regs = { + .spcr2 = FRST | GRST | XRST | XINTM(3), /* SPCR2=F1 */ + .spcr1 = RINTM(3) | RRST, /* SPCR1=30 */ + .rcr2 = 0, /* RCR2 =00 */ + .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1 = 140 */ + .xcr2 = 0, /* XCR2 = 0 */ + .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ + .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ + .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ + .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, + /* PCR0=0f0f */ + /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config sx1_alsa_config = { + .name = "SX1 EGold", + .mcbsp_regs_alsa = &mcbsp1_regs, +}; + +static struct platform_device sx1_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &sx1_alsa_config, + }, +}; + +/*----------- MTD -------------------------*/ + +static struct mtd_partition sx1_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0x01800000, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M - 2 * SZ_128K, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data sx1_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = sx1_partitions, + .nr_parts = ARRAY_SIZE(sx1_partitions), +}; + +#ifdef CONFIG_SX1_OLD_FLASH +/* MTD Intel StrataFlash - old flashes */ +static struct resource sx1_old_flash_resource[] = { + [0] = { + .start = OMAP_CS0_PHYS, /* Physical */ + .end = OMAP_CS0_PHYS + SZ_16M - 1,, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_CS1_PHYS, + .end = OMAP_CS1_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device sx1_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &sx1_flash_data, + }, + .num_resources = 2, + .resource = &sx1_old_flash_resource, +}; +#else +/* MTD Intel 4000 flash - new flashes */ +static struct resource sx1_new_flash_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device sx1_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &sx1_flash_data, + }, + .num_resources = 1, + .resource = &sx1_new_flash_resource, +}; +#endif + +/*----------- USB -------------------------*/ + +static struct omap_usb_config sx1_usb_config __initdata = { + .otg = 0, + .register_dev = 1, + .register_host = 0, + .hmc_mode = 0, + .pins[0] = 2, + .pins[1] = 0, + .pins[2] = 0, +}; + +/*----------- MMC -------------------------*/ + +static struct omap_mmc_config sx1_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, /* power is in Sofia */ + .switch_pin = OMAP_MPUIO(3), + }, +}; + +/*----------- LCD -------------------------*/ + +static struct platform_device sx1_lcd_device = { + .name = "lcd_sx1", + .id = -1, +}; + +static struct omap_lcd_config sx1_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +/*-----------------------------------------*/ +static struct platform_device *sx1_devices[] __initdata = { + &sx1_flash_device, + &sx1_kp_device, + &sx1_lcd_device, + &sx1_mcbsp1_device, + &sx1_irda_device, +}; +/*-----------------------------------------*/ + +static struct omap_uart_config sx1_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel sx1_config[] = { + { OMAP_TAG_USB, &sx1_usb_config }, + { OMAP_TAG_MMC, &sx1_mmc_config }, + { OMAP_TAG_LCD, &sx1_lcd_config }, + { OMAP_TAG_UART, &sx1_uart_config }, +}; +/*-----------------------------------------*/ +static void __init omap_sx1_init(void) +{ + platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); + + omap_board_config = sx1_config; + omap_board_config_size = ARRAY_SIZE(sx1_config); + omap_serial_init(); + + /* turn on USB power */ + /* sx1_setusbpower(1); cant do it here because i2c is not ready */ + omap_request_gpio(1); /* A_IRDA_OFF */ + omap_request_gpio(11); /* A_SWITCH */ + omap_request_gpio(15); /* A_USB_ON */ + omap_set_gpio_direction(1, 0);/* gpio1 -> output */ + omap_set_gpio_direction(11, 0);/* gpio11 -> output */ + omap_set_gpio_direction(15, 0);/* gpio15 -> output */ + /* set GPIO data */ + omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */ + omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */ + omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */ + +} +/*----------------------------------------*/ +static void __init omap_sx1_init_irq(void) +{ + omap1_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} +/*----------------------------------------*/ + +static void __init omap_sx1_map_io(void) +{ + omap1_map_common_io(); +} + +MACHINE_START(SX1, "OMAP310 based Siemens SX1") + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_sx1_map_io, + .init_irq = omap_sx1_init_irq, + .init_machine = omap_sx1_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 447a586eb334..214dd19889ac 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -235,7 +235,7 @@ static struct notifier_block panic_block = { static int __init voiceblue_setup(void) { /* Setup panic notifier */ - notifier_chain_register(&panic_notifier_list, &panic_block); + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index f625f6dd228a..5d9faa68d2ec 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -49,6 +49,15 @@ static void omap1_uart_recalc(struct clk * clk) clk->rate = 12000000; } +static void omap1_sossi_recalc(struct clk *clk) +{ + u32 div = omap_readl(MOD_CONF_CTRL_1); + + div = (div >> 17) & 0x7; + div++; + clk->rate = clk->parent->rate / div; +} + static int omap1_clk_enable_dsp_domain(struct clk *clk) { int retval; @@ -396,6 +405,31 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) return 0; } +static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) +{ + u32 l; + int div; + unsigned long p_rate; + + p_rate = clk->parent->rate; + /* Round towards slower frequency */ + div = (p_rate + rate - 1) / rate; + div--; + if (div < 0 || div > 7) + return -EINVAL; + + l = omap_readl(MOD_CONF_CTRL_1); + l &= ~(7 << 17); + l |= div << 17; + omap_writel(l, MOD_CONF_CTRL_1); + + clk->rate = p_rate / (div + 1); + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); + + return 0; +} + static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) { return 96000000 / calc_ext_dsor(rate); diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index f7df00205c4a..6eadf72828d8 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -17,6 +17,8 @@ static int omap1_clk_enable_generic(struct clk * clk); static void omap1_clk_disable_generic(struct clk * clk); static void omap1_ckctl_recalc(struct clk * clk); static void omap1_watchdog_recalc(struct clk * clk); +static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); +static void omap1_sossi_recalc(struct clk *clk); static void omap1_ckctl_recalc_dsp_domain(struct clk * clk); static int omap1_clk_enable_dsp_domain(struct clk * clk); static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); @@ -168,9 +170,10 @@ static struct clk ck_dpll1 = { static struct arm_idlect1_clk ck_dpll1out = { .clk = { - .name = "ck_dpll1out", + .name = "ck_dpll1out", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL | + ENABLE_REG_32BIT | RATE_PROPAGATES, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, @@ -180,6 +183,19 @@ static struct arm_idlect1_clk ck_dpll1out = { .idlect_shift = 12, }; +static struct clk sossi_ck = { + .name = "ck_sossi", + .parent = &ck_dpll1out.clk, + .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | + ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_1, + .enable_bit = 16, + .recalc = &omap1_sossi_recalc, + .set_rate = &omap1_set_sossi_rate, + .enable = &omap1_clk_enable_generic, + .disable = &omap1_clk_disable_generic, +}; + static struct clk arm_ck = { .name = "arm_ck", .parent = &ck_dpll1, @@ -282,7 +298,7 @@ static struct clk arminth_ck16xx = { static struct clk dsp_ck = { .name = "dsp_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = (void __iomem *)ARM_CKCTL, .enable_bit = EN_DSPCK, @@ -295,7 +311,7 @@ static struct clk dsp_ck = { static struct clk dspmmu_ck = { .name = "dspmmu_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL | ALWAYS_ENABLED, .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, @@ -306,7 +322,7 @@ static struct clk dspmmu_ck = { static struct clk dspper_ck = { .name = "dspper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL | VIRTUAL_IO_ADDRESS, .enable_reg = (void __iomem *)DSP_IDLECT2, .enable_bit = EN_PERCK, @@ -320,7 +336,7 @@ static struct clk dspper_ck = { static struct clk dspxor_ck = { .name = "dspxor_ck", .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, .enable_reg = (void __iomem *)DSP_IDLECT2, .enable_bit = EN_XORPCK, @@ -332,7 +348,7 @@ static struct clk dspxor_ck = { static struct clk dsptim_ck = { .name = "dsptim_ck", .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, .enable_reg = (void __iomem *)DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, @@ -374,7 +390,7 @@ static struct clk arminth_ck1510 = { static struct clk tipb_ck = { /* No-idle controlled by "tc_ck" */ - .name = "tibp_ck", + .name = "tipb_ck", .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | ALWAYS_ENABLED, @@ -733,7 +749,7 @@ remains active during MPU idle whenever this is enabled */ static struct clk i2c_fck = { .name = "i2c_fck", .id = 1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED, .parent = &armxor_ck.clk, @@ -760,6 +776,7 @@ static struct clk * onchip_clks[] = { &ck_dpll1, /* CK_GEN1 clocks */ &ck_dpll1out.clk, + &sossi_ck, &arm_ck, &armper_ck.clk, &arm_gpio_ck, diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 5432335bc493..52c70e5fcf65 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -283,6 +283,30 @@ MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1) MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1) MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1) MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1) + +/* parallel camera */ +MUX_CFG("J15_1610_CAM_LCLK", 4, 24, 0, 0, 18, 1, 0, 0, 0) +MUX_CFG("J18_1610_CAM_D7", 4, 27, 0, 0, 19, 1, 0, 0, 0) +MUX_CFG("J19_1610_CAM_D6", 5, 0, 0, 0, 20, 1, 0, 0, 0) +MUX_CFG("J14_1610_CAM_D5", 5, 3, 0, 0, 21, 1, 0, 0, 0) +MUX_CFG("K18_1610_CAM_D4", 5, 6, 0, 0, 22, 1, 0, 0, 0) +MUX_CFG("K19_1610_CAM_D3", 5, 9, 0, 0, 23, 1, 0, 0, 0) +MUX_CFG("K15_1610_CAM_D2", 5, 12, 0, 0, 24, 1, 0, 0, 0) +MUX_CFG("K14_1610_CAM_D1", 5, 15, 0, 0, 25, 1, 0, 0, 0) +MUX_CFG("L19_1610_CAM_D0", 5, 18, 0, 0, 26, 1, 0, 0, 0) +MUX_CFG("L18_1610_CAM_VS", 5, 21, 0, 0, 27, 1, 0, 0, 0) +MUX_CFG("L15_1610_CAM_HS", 5, 24, 0, 0, 28, 1, 0, 0, 0) +MUX_CFG("M19_1610_CAM_RSTZ", 5, 27, 0, 0, 29, 0, 0, 0, 0) +MUX_CFG("Y15_1610_CAM_OUTCLK", A, 0, 6, 2, 6, 0, 2, 0, 0) + +/* serial camera */ +MUX_CFG("H19_1610_CAM_EXCLK", 4, 21, 0, 0, 17, 0, 0, 0, 0) + /* REVISIT 5912 spec sez CCP_* can't pullup or pulldown ... ? */ +MUX_CFG("Y12_1610_CCP_CLKP", 8, 18, 6, 1, 24, 1, 1, 0, 0) +MUX_CFG("W13_1610_CCP_CLKM", 9, 0, 6, 1, 28, 1, 1, 0, 0) +MUX_CFG("W14_1610_CCP_DATAP", 9, 24, 6, 2, 4, 1, 2, 0, 0) +MUX_CFG("Y14_1610_CCP_DATAM", 9, 21, 6, 2, 3, 1, 2, 0, 0) + }; #endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 2e68be607295..089b8208de0e 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -153,11 +153,8 @@ void omap_pm_idle(void) use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1); #endif - if (omap_dma_running()) { + if (omap_dma_running()) use_idlect1 &= ~(1 << 6); - if (omap_lcd_dma_ext_running()) - use_idlect1 &= ~(1 << 12); - } /* We should be able to remove the do_sleep variable and multiple * tests above as soon as drivers, timer and DMA code have been fixed. diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7393109f5c30..7069c9d536f1 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,6 +11,10 @@ config ARCH_OMAP2420 select OMAP_DM_TIMER select ARCH_OMAP_OTG +config ARCH_OMAP2430 + bool "OMAP2430 support" + depends on ARCH_OMAP24XX + comment "OMAP Board Type" depends on ARCH_OMAP2 @@ -21,8 +25,13 @@ config MACH_OMAP_GENERIC config MACH_OMAP_H4 bool "OMAP 2420 H4 board" depends on ARCH_OMAP2 && ARCH_OMAP24XX - select OMAP_DEBUG_LEDS if LEDS || LEDS_OMAP_DEBUG + select OMAP_DEBUG_DEVICES config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" depends on ARCH_OMAP2 && ARCH_OMAP24XX + +config MACH_OMAP_2430SDP + bool "OMAP 2430 SDP board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 266d88e77bdc..b05b738d31e6 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -14,5 +14,6 @@ obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o +obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c new file mode 100644 index 000000000000..7e76fbf19b5d --- /dev/null +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -0,0 +1,218 @@ +/* + * linux/arch/arm/mach-omap2/board-2430sdp.c + * + * Copyright (C) 2006 Texas Instruments + * + * Modified from mach-omap2/board-generic.c + * + * Initial Code : Based on a patch from Komal Shah and Richard Woodruff + * Updated the Code for 2430 SDP : Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include "prcm-regs.h" + +#include + + +#define SDP2430_FLASH_CS 0 +#define SDP2430_SMC91X_CS 5 + +static struct mtd_partition sdp2430_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data sdp2430_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = sdp2430_partitions, + .nr_parts = ARRAY_SIZE(sdp2430_partitions), +}; + +static struct resource sdp2430_flash_resource = { + .start = SDP2430_CS0_BASE, + .end = SDP2430_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device sdp2430_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &sdp2430_flash_data, + }, + .num_resources = 1, + .resource = &sdp2430_flash_resource, +}; + +static struct resource sdp2430_smc91x_resources[] = { + [0] = { + .start = SDP2430_CS0_BASE, + .end = SDP2430_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdp2430_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources), + .resource = sdp2430_smc91x_resources, +}; + +static struct platform_device *sdp2430_devices[] __initdata = { + &sdp2430_smc91x_device, + &sdp2430_flash_device, +}; + +static inline void __init sdp2430_init_smc91x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + unsigned int rate; + struct clk *l3ck; + + eth_cs = SDP2430_SMC91X_CS; + + l3ck = clk_get(NULL, "core_l3_ck"); + if (IS_ERR(l3ck)) + rate = 100000000; + else + rate = clk_get_rate(l3ck); + + /* Make sure CS1 timings are correct, for 2430 always muxed */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); + + if (rate >= 160000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else if (rate >= 130000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else { /* rate = 100000000 */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); + } + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; + sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f; + udelay(100); + + if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + OMAP24XX_ETHR_GPIO_IRQ); + gpmc_cs_free(eth_cs); + return; + } + omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); + +} + +static void __init omap_2430sdp_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); + sdp2430_init_smc91x(); +} + +static struct omap_uart_config sdp2430_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel sdp2430_config[] = { + {OMAP_TAG_UART, &sdp2430_uart_config}, +}; + +static void __init omap_2430sdp_init(void) +{ + platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); + omap_board_config = sdp2430_config; + omap_board_config_size = ARRAY_SIZE(sdp2430_config); + omap_serial_init(); +} + +static void __init omap_2430sdp_map_io(void) +{ + omap2_map_common_io(); +} + +MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_2430sdp_map_io, + .init_irq = omap_2430sdp_init_irq, + .init_machine = omap_2430sdp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 878ff9181d0e..3bb49c17c858 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include @@ -32,10 +34,12 @@ #include #include +#include #include #include #include #include +#include #include "prcm-regs.h" /* LED & Switch macros */ @@ -46,6 +50,9 @@ #define SW_UP_GPIO17 17 #define SW_DOWN_GPIO58 58 +#define APOLLON_FLASH_CS 0 +#define APOLLON_ETH_CS 1 + static struct mtd_partition apollon_partitions[] = { { .name = "X-Loader + U-Boot", @@ -85,10 +92,10 @@ static struct flash_platform_data apollon_flash_data = { .nr_parts = ARRAY_SIZE(apollon_partitions), }; -static struct resource apollon_flash_resource = { - .start = APOLLON_CS0_BASE, - .end = APOLLON_CS0_BASE + SZ_128K, - .flags = IORESOURCE_MEM, +static struct resource apollon_flash_resource[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, }; static struct platform_device apollon_onenand_device = { @@ -97,14 +104,24 @@ static struct platform_device apollon_onenand_device = { .dev = { .platform_data = &apollon_flash_data, }, - .num_resources = ARRAY_SIZE(&apollon_flash_resource), - .resource = &apollon_flash_resource, + .num_resources = ARRAY_SIZE(apollon_flash_resource), + .resource = apollon_flash_resource, }; +static void __init apollon_flash_init(void) +{ + unsigned long base; + + if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) { + printk(KERN_ERR "Cannot request OneNAND GPMC CS\n"); + return; + } + apollon_flash_resource[0].start = base; + apollon_flash_resource[0].end = base + SZ_128K - 1; +} + static struct resource apollon_smc91x_resources[] = { [0] = { - .start = APOLLON_ETHR_START, /* Physical */ - .end = APOLLON_ETHR_START + 0xf, .flags = IORESOURCE_MEM, }, [1] = { @@ -126,14 +143,51 @@ static struct platform_device apollon_lcd_device = { .id = -1, }; +static struct omap_led_config apollon_led_config[] = { + { + .cdev = { + .name = "apollon:led0", + }, + .gpio = LED0_GPIO13, + }, + { + .cdev = { + .name = "apollon:led1", + }, + .gpio = LED1_GPIO14, + }, + { + .cdev = { + .name = "apollon:led2", + }, + .gpio = LED2_GPIO15, + }, +}; + +static struct omap_led_platform_data apollon_led_data = { + .nr_leds = ARRAY_SIZE(apollon_led_config), + .leds = apollon_led_config, +}; + +static struct platform_device apollon_led_device = { + .name = "omap-led", + .id = -1, + .dev = { + .platform_data = &apollon_led_data, + }, +}; + static struct platform_device *apollon_devices[] __initdata = { &apollon_onenand_device, &apollon_smc91x_device, &apollon_lcd_device, + &apollon_led_device, }; static inline void __init apollon_init_smc91x(void) { + unsigned long base; + /* Make sure CS1 timings are correct */ GPMC_CONFIG1_1 = 0x00011203; GPMC_CONFIG2_1 = 0x001f1f01; @@ -141,13 +195,20 @@ static inline void __init apollon_init_smc91x(void) GPMC_CONFIG4_1 = 0x1c091c09; GPMC_CONFIG5_1 = 0x041f1f1f; GPMC_CONFIG6_1 = 0x000004c4; - GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24); + + if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) { + printk(KERN_ERR "Failed to request GPMC CS for smc91x\n"); + return; + } + apollon_smc91x_resources[0].start = base + 0x300; + apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); omap_cfg_reg(W4__24XX_GPIO74); if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); + gpmc_cs_free(APOLLON_ETH_CS); return; } omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1); @@ -175,6 +236,13 @@ static struct omap_mmc_config apollon_mmc_config __initdata = { }, }; +static struct omap_usb_config apollon_usb_config __initdata = { + .register_dev = 1, + .hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */ + + .pins[0] = 6, +}; + static struct omap_lcd_config apollon_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -182,6 +250,7 @@ static struct omap_lcd_config apollon_lcd_config __initdata = { static struct omap_board_config_kernel apollon_config[] = { { OMAP_TAG_UART, &apollon_uart_config }, { OMAP_TAG_MMC, &apollon_mmc_config }, + { OMAP_TAG_USB, &apollon_usb_config }, { OMAP_TAG_LCD, &apollon_lcd_config }, }; @@ -250,10 +319,22 @@ static void __init apollon_sw_init(void) return; } +static void __init apollon_usb_init(void) +{ + /* USB device */ + /* DEVICE_SUSPEND */ + omap_cfg_reg(P21_242X_GPIO12); + omap_request_gpio(12); + omap_set_gpio_direction(12, 0); /* OUT */ + omap_set_gpio_dataout(12, 0); +} + static void __init omap_apollon_init(void) { apollon_led_init(); apollon_sw_init(); + apollon_flash_init(); + apollon_usb_init(); /* REVISIT: where's the correct place */ omap_cfg_reg(W19_24XX_SYS_NIRQ); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 452193f01531..f125f432cc3e 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -131,26 +131,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -static struct resource h4_smc91x_resources[] = { - [0] = { - .start = OMAP24XX_ETHR_START, /* Physical */ - .end = OMAP24XX_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(h4_smc91x_resources), - .resource = h4_smc91x_resources, -}; - /* Select between the IrDA and aGPS module */ static int h4_select_irda(struct device *dev, int state) @@ -266,29 +246,14 @@ static struct platform_device h4_lcd_device = { .id = -1, }; -static struct resource h4_led_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device h4_led_device = { - .name = "omap_dbg_led", - .id = -1, - .num_resources = ARRAY_SIZE(h4_led_resources), - .resource = h4_led_resources, -}; - static struct platform_device *h4_devices[] __initdata = { - &h4_smc91x_device, &h4_flash_device, &h4_irda_device, &h4_kp_device, &h4_lcd_device, - &h4_led_device, }; -static inline void __init h4_init_smc91x(void) +static inline void __init h4_init_debug(void) { /* Make sure CS1 timings are correct */ GPMC_CONFIG1_1 = 0x00011200; @@ -301,12 +266,8 @@ static inline void __init h4_init_smc91x(void) udelay(100); omap_cfg_reg(M15_24XX_GPIO92); - if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - OMAP24XX_ETHR_GPIO_IRQ); - return; - } - omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); + if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0) + gpmc_cs_free(eth_cs); } static void __init omap_h4_init_irq(void) @@ -314,7 +275,6 @@ static void __init omap_h4_init_irq(void) omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); - h4_init_smc91x(); } static struct omap_uart_config h4_uart_config __initdata = { diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 52ec2f2d6360..b603bc5f8e5b 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -55,8 +55,10 @@ static void omap_init_i2c(void) if (machine_is_omap_h4()) return; - omap_cfg_reg(J15_24XX_I2C2_SCL); - omap_cfg_reg(H19_24XX_I2C2_SDA); + if (!cpu_is_omap2430()) { + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + } (void) platform_device_register(&omap_i2c_device2); } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e290b989aa94..5a4cc2076a7d 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -22,7 +22,14 @@ #undef DEBUG +#ifdef CONFIG_ARCH_OMAP2420 #define GPMC_BASE 0x6800a000 +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +#define GPMC_BASE 0x6E000000 +#endif + #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 #define GPMC_SYSSTATUS 0x14 @@ -88,7 +95,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) } /* TODO: Add support for gpmc_fck to clock framework and use it */ -static unsigned long gpmc_get_fclk_period(void) +unsigned long gpmc_get_fclk_period(void) { /* In picoseconds */ return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000); @@ -104,6 +111,13 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } +unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) +{ + unsigned long ticks = gpmc_ns_to_ticks(time_ns); + + return ticks * gpmc_get_fclk_period() / 1000; +} + #ifdef DEBUG static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int time, const char *name) @@ -120,15 +134,21 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, else ticks = gpmc_ns_to_ticks(time); nr_bits = end_bit - st_bit + 1; - if (ticks >= 1 << nr_bits) + if (ticks >= 1 << nr_bits) { +#ifdef DEBUG + printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n", + cs, name, time, ticks, 1 << nr_bits); +#endif return -1; + } mask = (1 << nr_bits) - 1; l = gpmc_cs_read_reg(cs, reg); #ifdef DEBUG - printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n", + printk(KERN_INFO + "GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n", cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000, - (l >> st_bit) & mask); + (l >> st_bit) & mask, time); #endif l &= ~(mask << st_bit); l |= ticks << st_bit; @@ -157,7 +177,7 @@ int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) div = l / gpmc_get_fclk_period(); if (div > 4) return -1; - if (div < 0) + if (div <= 0) div = 1; return div; @@ -191,14 +211,19 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); -#ifdef DEBUG - printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n", - cs, gpmc_get_fclk_period(), div); -#endif - + /* caller is expected to have initialized CONFIG1 to cover + * at least sync vs async + */ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - l &= ~0x03; - l |= (div - 1); + if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) { +#ifdef DEBUG + printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n", + cs, (div * gpmc_get_fclk_period()) / 1000, div); +#endif + l &= ~0x03; + l |= (div - 1); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l); + } return 0; } diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 871ace4fccb8..4dfd878d7968 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -17,7 +17,13 @@ #include +#if defined(CONFIG_ARCH_OMAP2420) #define OMAP24XX_TAP_BASE io_p2v(0x48014000) +#endif + +#if defined(CONFIG_ARCH_OMAP2430) +#define OMAP24XX_TAP_BASE io_p2v(0x4900A000) +#endif #define OMAP_TAP_IDCODE 0x0204 #define OMAP_TAP_PROD_ID 0x0208 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 82dc70f6b779..5a4091f582ed 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -5,6 +5,7 @@ * * Copyright (C) 2005 Nokia Corporation * Author: Juha Yrjölä + * Updated map desc to add 2430 support : * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -26,6 +27,7 @@ extern void omap_sram_init(void); extern int omap2_clk_init(void); extern void omap2_check_revision(void); +extern void omap2_init_memory(void); extern void gpmc_init(void); extern void omapfb_reserve_sdram(void); @@ -40,6 +42,20 @@ static struct map_desc omap2_io_desc[] __initdata = { .length = L3_24XX_SIZE, .type = MT_DEVICE }, +#ifdef CONFIG_ARCH_OMAP2430 + { + .virtual = L4_WK_243X_VIRT, + .pfn = __phys_to_pfn(L4_WK_243X_PHYS), + .length = L4_WK_243X_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP243X_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS), + .length = OMAP243X_GPMC_SIZE, + .type = MT_DEVICE + }, +#endif { .virtual = DSP_MEM_24XX_VIRT, .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), @@ -80,5 +96,11 @@ void __init omap2_init_common_hw(void) { omap2_mux_init(); omap2_clk_init(); +/* + * Need to Fix this for 2430 + */ +#ifndef CONFIG_ARCH_OMAP2430 + omap2_init_memory(); +#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index a39d30680300..f064f725e724 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -37,7 +37,7 @@ static struct omap_irq_bank { } __attribute__ ((aligned(4))) irq_banks[] = { { /* MPU INTC */ - .base_reg = OMAP24XX_IC_BASE, + .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE), .nr_irqs = 96, }, { /* XXX: DSP INTC */ @@ -47,7 +47,7 @@ static struct omap_irq_bank { /* XXX: FIQ and additional INTC support (only MPU at the moment) */ static void omap_ack_irq(unsigned int irq) { - omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); + __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); } static void omap_mask_irq(unsigned int irq) @@ -60,7 +60,7 @@ static void omap_mask_irq(unsigned int irq) irq %= 32; } - omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); + __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); } static void omap_unmask_irq(unsigned int irq) @@ -73,7 +73,7 @@ static void omap_unmask_irq(unsigned int irq) irq %= 32; } - omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); + __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); } static void omap_mask_ack_irq(unsigned int irq) @@ -93,17 +93,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) { unsigned long tmp; - tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff; + tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff; printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " "(revision %ld.%ld) with %d interrupts\n", bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); - tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG); + tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG); tmp |= 1 << 1; /* soft reset */ - omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG); - while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) /* Wait for reset to complete */; + + /* Enable autoidle */ + __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG); } void __init omap_init_irq(void) diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index 85cbc2a2e663..3e5d8cd4ea4f 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -30,6 +30,7 @@ #include "prcm-regs.h" #include "memory.h" + static struct memory_timings mem_timings; u32 omap2_memory_get_slow_dll_ctrl(void) @@ -99,3 +100,20 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode) /* 90 degree phase for anything below 133Mhz + disable DLL filter */ mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); } + +/* turn on smart idle modes for SDRAM scheduler and controller */ +void __init omap2_init_memory(void) +{ + u32 l; + + l = SMS_SYSCONFIG; + l &= ~(0x3 << 3); + l |= (0x2 << 3); + SMS_SYSCONFIG = l; + + l = SDRC_SYSCONFIG; + l &= ~(0x3 << 3); + l |= (0x2 << 3); + SDRC_SYSCONFIG = l; + +} diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 0439906d5da7..05750975d746 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -53,8 +53,8 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1) /* 24xx GPMC chipselects, wait pin monitoring */ -MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1) -MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1) +MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1) +MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1) MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1) MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1) MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1) @@ -67,18 +67,18 @@ MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1) MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1) /* 24xx GPIO */ -MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1) -MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1) -MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1) -MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1) -MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1) -MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1) -MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) -MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) +MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1) +MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1) +MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1) +MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1) +MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1) +MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1) +MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) +MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) -MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) +MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) -MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1) +MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1) MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1) MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1) @@ -95,17 +95,17 @@ MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1) MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1) /* 24xx external DMA requests */ -MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1) -MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1) -MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1) -MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1) -MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) -MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) +MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1) +MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1) +MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1) +MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1) +MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) +MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) /* TSC IRQ */ MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1) -/* UART3 */ +/* UART3 */ MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c new file mode 100644 index 000000000000..80bb42eb5082 --- /dev/null +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -0,0 +1,349 @@ +/* + * linux/arch/arm/mach-omap2/usb-tusb6010.c + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include + +#include +#include +#include + + +static u8 async_cs, sync_cs; +static unsigned refclk_psec; + + +/* t2_ps, when quantized to fclk units, must happen no earlier than + * the clock after after t1_NS. + * + * Return a possibly updated value of t2_ps, converted to nsec. + */ +static unsigned +next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps) +{ + unsigned t1_ps = t1_NS * 1000; + unsigned t1_f, t2_f; + + if ((t1_ps + fclk_ps) < t2_ps) + return t2_ps / 1000; + + t1_f = (t1_ps + fclk_ps - 1) / fclk_ps; + t2_f = (t2_ps + fclk_ps - 1) / fclk_ps; + + if (t1_f >= t2_f) + t2_f = t1_f + 1; + + return (t2_f * fclk_ps) / 1000; +} + +/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ + +static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps) +{ + struct gpmc_timings t; + unsigned t_acsnh_advnh = sysclk_ps + 3000; + unsigned tmp; + + memset(&t, 0, sizeof(t)); + + /* CS_ON = t_acsnh_acsnl */ + t.cs_on = 8; + /* ADV_ON = t_acsnh_advnh - t_advn */ + t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps); + + /* + * READ ... from omap2420 TRM fig 12-13 + */ + + /* ADV_RD_OFF = t_acsnh_advnh */ + t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps); + + /* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */ + t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps); + + /* ACCESS = counters continue only after nRDY */ + tmp = t.oe_on * 1000 + 300; + t.access = next_clk(t.oe_on, tmp, fclk_ps); + + /* OE_OFF = after data gets sampled */ + tmp = t.access * 1000; + t.oe_off = next_clk(t.access, tmp, fclk_ps); + + t.cs_rd_off = t.oe_off; + + tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */; + t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); + + /* + * WRITE ... from omap2420 TRM fig 12-15 + */ + + /* ADV_WR_OFF = t_acsnh_advnh */ + t.adv_wr_off = t.adv_rd_off; + + /* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */ + t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps); + + /* WE_OFF = after data gets sampled */ + tmp = t.we_on * 1000 + 300; + t.we_off = next_clk(t.we_on, tmp, fclk_ps); + + t.cs_wr_off = t.we_off; + + tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */; + t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); + + return gpmc_cs_set_timings(async_cs, &t); +} + +static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps) +{ + struct gpmc_timings t; + unsigned t_scsnh_advnh = sysclk_ps + 3000; + unsigned tmp; + + memset(&t, 0, sizeof(t)); + t.cs_on = 8; + + /* ADV_ON = t_acsnh_advnh - t_advn */ + t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps); + + /* GPMC_CLK rate = fclk rate / div */ + t.sync_clk = 12 /* 11.1 nsec */; + tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps; + if (tmp > 4) + return -ERANGE; + if (tmp <= 0) + tmp = 1; + t.page_burst_access = (fclk_ps * tmp) / 1000; + + /* + * READ ... based on omap2420 TRM fig 12-19, 12-20 + */ + + /* ADV_RD_OFF = t_scsnh_advnh */ + t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps); + + /* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */ + tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps); + t.oe_on = next_clk(t.adv_on, tmp, fclk_ps); + + /* ACCESS = number of clock cycles after t_adv_eon */ + tmp = (t.oe_on * 1000) + (5 * fclk_ps); + t.access = next_clk(t.oe_on, tmp, fclk_ps); + + /* OE_OFF = after data gets sampled */ + tmp = (t.access * 1000) + (1 * fclk_ps); + t.oe_off = next_clk(t.access, tmp, fclk_ps); + + t.cs_rd_off = t.oe_off; + + tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */; + t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); + + /* + * WRITE ... based on omap2420 TRM fig 12-21 + */ + + /* ADV_WR_OFF = t_scsnh_advnh */ + t.adv_wr_off = t.adv_rd_off; + + /* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */ + tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps); + t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps); + + /* WE_OFF = number of clock cycles after t_adv_wen */ + tmp = (t.we_on * 1000) + (6 * fclk_ps); + t.we_off = next_clk(t.we_on, tmp, fclk_ps); + + t.cs_wr_off = t.we_off; + + tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */; + t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); + + return gpmc_cs_set_timings(sync_cs, &t); +} + +extern unsigned long gpmc_get_fclk_period(void); + +/* tusb driver calls this when it changes the chip's clocking */ +int tusb6010_platform_retime(unsigned is_refclk) +{ + static const char error[] = + KERN_ERR "tusb6010 %s retime error %d\n"; + + unsigned fclk_ps = gpmc_get_fclk_period(); + unsigned sysclk_ps; + int status; + + if (!refclk_psec) + return -ENODEV; + + sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; + + status = tusb_set_async_mode(sysclk_ps, fclk_ps); + if (status < 0) { + printk(error, "async", status); + goto done; + } + status = tusb_set_sync_mode(sysclk_ps, fclk_ps); + if (status < 0) + printk(error, "sync", status); +done: + return status; +} +EXPORT_SYMBOL_GPL(tusb6010_platform_retime); + +static struct resource tusb_resources[] = { + /* Order is significant! The start/end fields + * are updated during setup.. + */ + { /* Asynchronous access */ + .flags = IORESOURCE_MEM, + }, + { /* Synchronous access */ + .flags = IORESOURCE_MEM, + }, + { /* IRQ */ + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 tusb_dmamask = ~(u32)0; + +static struct platform_device tusb_device = { + .name = "musb_hdrc", + .id = -1, + .dev = { + .dma_mask = &tusb_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(tusb_resources), + .resource = tusb_resources, +}; + + +/* this may be called only from board-*.c setup code */ +int __init +tusb6010_setup_interface(struct musb_hdrc_platform_data *data, + unsigned ps_refclk, unsigned waitpin, + unsigned async, unsigned sync, + unsigned irq, unsigned dmachan) +{ + int status; + static char error[] __initdata = + KERN_ERR "tusb6010 init error %d, %d\n"; + + /* ASYNC region, primarily for PIO */ + status = gpmc_cs_request(async, SZ_16M, (unsigned long *) + &tusb_resources[0].start); + if (status < 0) { + printk(error, 1, status); + return status; + } + tusb_resources[0].end = tusb_resources[0].start + 0x9ff; + async_cs = async; + gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, + GPMC_CONFIG1_PAGE_LEN(2) + | GPMC_CONFIG1_WAIT_READ_MON + | GPMC_CONFIG1_WAIT_WRITE_MON + | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) + | GPMC_CONFIG1_READTYPE_ASYNC + | GPMC_CONFIG1_WRITETYPE_ASYNC + | GPMC_CONFIG1_DEVICESIZE_16 + | GPMC_CONFIG1_DEVICETYPE_NOR + | GPMC_CONFIG1_MUXADDDATA); + + + /* SYNC region, primarily for DMA */ + status = gpmc_cs_request(sync, SZ_16M, (unsigned long *) + &tusb_resources[1].start); + if (status < 0) { + printk(error, 2, status); + return status; + } + tusb_resources[1].end = tusb_resources[1].start + 0x9ff; + sync_cs = sync; + gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, + GPMC_CONFIG1_READMULTIPLE_SUPP + | GPMC_CONFIG1_READTYPE_SYNC + | GPMC_CONFIG1_WRITEMULTIPLE_SUPP + | GPMC_CONFIG1_WRITETYPE_SYNC + | GPMC_CONFIG1_CLKACTIVATIONTIME(1) + | GPMC_CONFIG1_PAGE_LEN(2) + | GPMC_CONFIG1_WAIT_READ_MON + | GPMC_CONFIG1_WAIT_WRITE_MON + | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) + | GPMC_CONFIG1_DEVICESIZE_16 + | GPMC_CONFIG1_DEVICETYPE_NOR + | GPMC_CONFIG1_MUXADDDATA + /* fclk divider gets set later */ + ); + + /* IRQ */ + status = omap_request_gpio(irq); + if (status < 0) { + printk(error, 3, status); + return status; + } + omap_set_gpio_direction(irq, 1); + tusb_resources[2].start = irq + IH_GPIO_BASE; + + /* set up memory timings ... can speed them up later */ + if (!ps_refclk) { + printk(error, 4, status); + return -ENODEV; + } + refclk_psec = ps_refclk; + status = tusb6010_platform_retime(1); + if (status < 0) { + printk(error, 5, status); + return status; + } + + /* finish device setup ... */ + if (!data) { + printk(error, 6, status); + return -ENODEV; + } + data->multipoint = 1; + tusb_device.dev.platform_data = data; + + /* REVISIT let the driver know what DMA channels work */ + if (!dmachan) + tusb_device.dev.dma_mask = NULL; + else { + /* assume OMAP 2420 ES2.0 and later */ + if (dmachan & (1 << 0)) + omap_cfg_reg(AA10_242X_DMAREQ0); + if (dmachan & (1 << 1)) + omap_cfg_reg(AA6_242X_DMAREQ1); + if (dmachan & (1 << 2)) + omap_cfg_reg(E4_242X_DMAREQ2); + if (dmachan & (1 << 3)) + omap_cfg_reg(G4_242X_DMAREQ3); + if (dmachan & (1 << 4)) + omap_cfg_reg(D3_242X_DMAREQ4); + if (dmachan & (1 << 5)) + omap_cfg_reg(E3_242X_DMAREQ5); + } + + /* so far so good ... register the device */ + status = platform_device_register(&tusb_device); + if (status < 0) { + printk(error, 7, status); + return status; + } + return 0; +} diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index cfc69f3842fd..c1f7e5a819a3 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -20,10 +20,15 @@ endchoice comment "OMAP Feature Selections" -config OMAP_DEBUG_LEDS +config OMAP_DEBUG_DEVICES bool help - For debug card leds on TI reference boards. + For debug cards on TI reference boards. + +config OMAP_DEBUG_LEDS + bool + depends on OMAP_DEBUG_DEVICES + default y if LEDS || LEDS_OMAP_DEBUG config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 41a3c1cf3bd4..2549129aabc6 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -17,4 +17,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o +obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c new file mode 100644 index 000000000000..83a5f8b91857 --- /dev/null +++ b/arch/arm/plat-omap/debug-devices.c @@ -0,0 +1,86 @@ +/* + * linux/arch/arm/plat-omap/debug-devices.c + * + * Copyright (C) 2005 Nokia Corporation + * Modified from mach-omap2/board-h4.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +#include +#include + + +/* Many OMAP development platforms reuse the same "debug board"; these + * platforms include H2, H3, H4, and Perseus2. + */ + +static struct resource smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct resource led_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device led_device = { + .name = "omap_dbg_led", + .id = -1, + .num_resources = ARRAY_SIZE(led_resources), + .resource = led_resources, +}; + +static struct platform_device *debug_devices[] __initdata = { + &smc91x_device, + &led_device, + /* ps2 kbd + mouse ports */ + /* 4 extra uarts */ + /* 6 input dip switches */ + /* 8 output pins */ +}; + +int __init debug_card_init(u32 addr, unsigned gpio) +{ + int status; + + smc91x_resources[0].start = addr + 0x300; + smc91x_resources[0].end = addr + 0x30f; + + smc91x_resources[1].start = OMAP_GPIO_IRQ(gpio); + smc91x_resources[1].end = OMAP_GPIO_IRQ(gpio); + + status = omap_request_gpio(gpio); + if (status < 0) { + printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio); + return status; + } + omap_set_gpio_direction(gpio, 1); + + led_resources[0].start = addr; + led_resources[0].end = addr + SZ_4K - 1; + + return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices)); +} diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 88d5b6d9f950..05a38498cbe0 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1347,11 +1347,6 @@ void omap_stop_lcd_dma(void) omap_writew(w, OMAP1610_DMA_LCD_CTRL); } -int omap_lcd_dma_ext_running(void) -{ - return lcd_dma.ext_ctrl && lcd_dma.active; -} - /*----------------------------------------------------------------------------*/ static int __init omap_init_dma(void) @@ -1493,7 +1488,6 @@ EXPORT_SYMBOL(omap_free_lcd_dma); EXPORT_SYMBOL(omap_enable_lcd_dma); EXPORT_SYMBOL(omap_setup_lcd_dma); EXPORT_SYMBOL(omap_stop_lcd_dma); -EXPORT_SYMBOL(omap_lcd_dma_ext_running); EXPORT_SYMBOL(omap_set_lcd_dma_b1); EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); diff --git a/include/asm-arm/arch-omap/blizzard.h b/include/asm-arm/arch-omap/blizzard.h new file mode 100644 index 000000000000..8d160f171372 --- /dev/null +++ b/include/asm-arm/arch-omap/blizzard.h @@ -0,0 +1,12 @@ +#ifndef _BLIZZARD_H +#define _BLIZZARD_H + +struct blizzard_platform_data { + void (*power_up)(struct device *dev); + void (*power_down)(struct device *dev); + unsigned long (*get_clock_rate)(struct device *dev); + + unsigned te_connected : 1; +}; + +#endif diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h new file mode 100644 index 000000000000..e9c65ce3cb12 --- /dev/null +++ b/include/asm-arm/arch-omap/board-2430sdp.h @@ -0,0 +1,44 @@ +/* + * linux/include/asm-arm/arch-omap/board-2430sdp.h + * + * Hardware definitions for TI OMAP2430 SDP board. + * + * Based on board-h4.h by Dirk Behme + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_2430SDP_H +#define __ASM_ARCH_OMAP_2430SDP_H + +/* Placeholder for 2430SDP specific defines */ +#define OMAP24XX_ETHR_START 0x08000300 +#define OMAP24XX_ETHR_GPIO_IRQ 149 +#define SDP2430_CS0_BASE 0x04000000 + +#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ + +/* TWL4030 Primary Interrupt Handler (PIH) interrupts */ +#define IH_TWL4030_BASE IH_BOARD_BASE +#define IH_TWL4030_END (IH_TWL4030_BASE+8) +#define NR_IRQS (IH_TWL4030_END) + +#endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h new file mode 100644 index 000000000000..cd22035a7160 --- /dev/null +++ b/include/asm-arm/arch-omap/board-palmte.h @@ -0,0 +1,34 @@ +/* + * linux/include/asm-arm/arch-omap/board-palmte.h + * + * Hardware definitions for the Palm Tungsten E device. + * + * Maintainters : http://palmtelinux.sf.net + * palmtelinux-developpers@lists.sf.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP_BOARD_PALMTE_H +#define __OMAP_BOARD_PALMTE_H + +#include + +#define PALMTE_USBDETECT_GPIO 0 +#define PALMTE_USB_OR_DC_GPIO 1 +#define PALMTE_TSC_GPIO 4 +#define PALMTE_PINTDAV_GPIO 6 +#define PALMTE_MMC_WP_GPIO 8 +#define PALMTE_MMC_POWER_GPIO 9 +#define PALMTE_HDQ_GPIO 11 +#define PALMTE_HEADPHONES_GPIO 14 +#define PALMTE_SPEAKER_GPIO 15 +#define PALMTE_DC_GPIO OMAP_MPUIO(2) +#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4) +#define PALMTE_MMC1_GPIO OMAP_MPUIO(6) +#define PALMTE_MMC2_GPIO OMAP_MPUIO(7) +#define PALMTE_MMC3_GPIO OMAP_MPUIO(11) + +#endif /* __OMAP_BOARD_PALMTE_H */ diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/include/asm-arm/arch-omap/board-palmtt.h new file mode 100644 index 000000000000..d9590b0ec90e --- /dev/null +++ b/include/asm-arm/arch-omap/board-palmtt.h @@ -0,0 +1,23 @@ +/* + * linux/include/asm-arm/arch-omap/board-palmte.h + * + * Hardware definitions for the Palm Tungsten|T device. + * + * Maintainters : Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP_BOARD_PALMTT_H +#define __OMAP_BOARD_PALMTT_H + +#define PALMTT_USBDETECT_GPIO 0 +#define PALMTT_CABLE_GPIO 1 +#define PALMTT_LED_GPIO 3 +#define PALMTT_PENIRQ_GPIO 6 +#define PALMTT_MMC_WP_GPIO 8 +#define PALMTT_HDQ_GPIO 11 + +#endif /* __OMAP_BOARD_PALMTT_H */ diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/include/asm-arm/arch-omap/board-palmz71.h new file mode 100644 index 000000000000..1252a859787d --- /dev/null +++ b/include/asm-arm/arch-omap/board-palmz71.h @@ -0,0 +1,26 @@ +/* + * linux/include/asm-arm/arch-omap/board-palmz71.h + * + * Hardware definitions for the Palm Zire71 device. + * + * Maintainters : Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP_BOARD_PALMZ71_H +#define __OMAP_BOARD_PALMZ71_H + +#define PALMZ71_USBDETECT_GPIO 0 +#define PALMZ71_PENIRQ_GPIO 6 +#define PALMZ71_MMC_WP_GPIO 8 +#define PALMZ71_HDQ_GPIO 11 + +#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) +#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) +#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) +#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) + +#endif /* __OMAP_BOARD_PALMZ71_H */ diff --git a/include/asm-arm/arch-omap/board-sx1.h b/include/asm-arm/arch-omap/board-sx1.h new file mode 100644 index 000000000000..2bb8dd6e2d14 --- /dev/null +++ b/include/asm-arm/arch-omap/board-sx1.h @@ -0,0 +1,46 @@ +/* + * Siemens SX1 board definitions + * + * Copyright: Vovan888 at gmail com + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ + +#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H +#define __ASM_ARCH_SX1_I2C_CHIPS_H + +#define SOFIA_MAX_LIGHT_VAL 0x2B + +#define SOFIA_I2C_ADDR 0x32 +/* Sofia reg 3 bits masks */ +#define SOFIA_POWER1_REG 0x03 + +#define SOFIA_USB_POWER 0x01 +#define SOFIA_MMC_POWER 0x04 +#define SOFIA_BLUETOOTH_POWER 0x08 +#define SOFIA_MMILIGHT_POWER 0x20 + +#define SOFIA_POWER2_REG 0x04 +#define SOFIA_BACKLIGHT_REG 0x06 +#define SOFIA_KEYLIGHT_REG 0x07 +#define SOFIA_DIMMING_REG 0x09 + + +/* Function Prototypes for SX1 devices control on I2C bus */ + +int sx1_setbacklight(u8 backlight); +int sx1_getbacklight(u8 *backlight); +int sx1_setkeylight(u8 keylight); +int sx1_getkeylight(u8 *keylight); + +int sx1_setmmipower(u8 onoff); +int sx1_setusbpower(u8 onoff); +int sx1_setmmcpower(u8 onoff); + +#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h index 031672c56377..db44c5d1f1a0 100644 --- a/include/asm-arm/arch-omap/board.h +++ b/include/asm-arm/arch-omap/board.h @@ -179,4 +179,8 @@ extern const void *omap_get_var_config(u16 tag, size_t *len); extern struct omap_board_config_kernel *omap_board_config; extern int omap_board_config_size; + +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); + #endif diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index f7774192a41e..f33b467fddb7 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -417,7 +417,6 @@ extern void omap_free_lcd_dma(void); extern void omap_setup_lcd_dma(void); extern void omap_enable_lcd_dma(void); extern void omap_stop_lcd_dma(void); -extern int omap_lcd_dma_ext_running(void); extern void omap_set_lcd_dma_ext_controller(int external); extern void omap_set_lcd_dma_single_transfer(int single); extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, diff --git a/include/asm-arm/arch-omap/eac.h b/include/asm-arm/arch-omap/eac.h new file mode 100644 index 000000000000..6662cb02bafc --- /dev/null +++ b/include/asm-arm/arch-omap/eac.h @@ -0,0 +1,101 @@ +/* + * linux/include/asm-arm/arch-omap2/eac.h + * + * Defines for Enhanced Audio Controller + * + * Contact: Jarkko Nikula + * + * Copyright (C) 2006 Nokia Corporation + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H +#define __ASM_ARM_ARCH_OMAP2_EAC_H + +#include +#include +#include + +#include +#include + +/* master codec clock source */ +#define EAC_MCLK_EXT_MASK 0x100 +enum eac_mclk_src { + EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ + EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, + EAC_MCLK_EXT_12288000, + EAC_MCLK_EXT_2x11289600, + EAC_MCLK_EXT_2x12288000, +}; + +/* codec port interface mode */ +enum eac_codec_mode { + EAC_CODEC_PCM, + EAC_CODEC_AC97, + EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ + EAC_CODEC_I2S_SLAVE, +}; + +/* configuration structure for I2S mode */ +struct eac_i2s_conf { + /* if enabled, then first data slot (left channel) is signaled as + * positive level of frame sync EAC.AC_FS */ + unsigned polarity_changed_mode:1; + /* if enabled, then serial data starts one clock cycle after the + * of EAC.AC_FS for first audio slot */ + unsigned sync_delay_enable:1; +}; + +/* configuration structure for EAC codec port */ +struct eac_codec { + enum eac_mclk_src mclk_src; + + enum eac_codec_mode codec_mode; + union { + struct eac_i2s_conf i2s; + } codec_conf; + + int default_rate; /* audio sampling rate */ + + int (* set_power)(void *private_data, int dac, int adc); + int (* register_controls)(void *private_data, + struct snd_card *card); + const char *short_name; + + void *private_data; +}; + +/* structure for passing platform dependent data to the EAC driver */ +struct eac_platform_data { + int (* init)(struct device *eac_dev); + void (* cleanup)(struct device *eac_dev); + /* these callbacks are used to configure & control external MCLK + * source. NULL if not used */ + int (* enable_ext_clocks)(struct device *eac_dev); + void (* disable_ext_clocks)(struct device *eac_dev); +}; + +extern void omap_init_eac(struct eac_platform_data *pdata); + +extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); +extern void eac_unregister_codec(struct device *eac_dev); + +extern int eac_set_mode(struct device *eac_dev, int play, int rec); + +#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h index 995cc83482eb..6a8e07ffc2d0 100644 --- a/include/asm-arm/arch-omap/gpmc.h +++ b/include/asm-arm/arch-omap/gpmc.h @@ -23,9 +23,10 @@ #define GPMC_CS_NAND_DATA 0x24 #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) -#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 20) +#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) #define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) #define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) +#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) #define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) #define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) #define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) @@ -80,6 +81,8 @@ struct gpmc_timings { }; extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); +extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); +extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index e225f4f39b34..da572092e255 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -318,6 +318,10 @@ #include "board-h4.h" #endif +#ifdef CONFIG_MACH_OMAP_2430SDP +#include "board-2430sdp.h" +#endif + #ifdef CONFIG_MACH_OMAP_APOLLON #include "board-apollon.h" #endif @@ -330,6 +334,22 @@ #include "board-voiceblue.h" #endif +#ifdef CONFIG_MACH_OMAP_PALMTE +#include "board-palmte.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PALMZ71 +#include "board-palmz71.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PALMTT +#include "board-palmtt.h" +#endif + +#ifdef CONFIG_MACH_SX1 +#include "board-sx1.h" +#endif + #endif /* !__ASSEMBLER__ */ #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 4aca7e3d7566..289082d07f14 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -72,6 +72,16 @@ #define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ #define L4_24XX_VIRT 0xd8000000 #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ + +#ifdef CONFIG_ARCH_OMAP2430 +#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ +#define L4_WK_243X_VIRT 0xd9000000 +#define L4_WK_243X_SIZE SZ_1M +#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ +#define OMAP243X_GPMC_VIRT 0xFE000000 +#define OMAP243X_GPMC_SIZE SZ_1M +#endif + #define IO_OFFSET 0x90000000 #define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ #define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h index 82d276a6bd95..69ed7ee40179 100644 --- a/include/asm-arm/arch-omap/menelaus.h +++ b/include/asm-arm/arch-omap/menelaus.h @@ -7,6 +7,12 @@ #ifndef __ASM_ARCH_MENELAUS_H #define __ASM_ARCH_MENELAUS_H +struct device; + +struct menelaus_platform_data { + int (* late_init)(struct device *dev); +}; + extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), void *data); extern void menelaus_unregister_mmc_callback(void); @@ -20,6 +26,19 @@ extern int menelaus_set_vaux(unsigned int mV); extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); extern int menelaus_set_slot_sel(int enable); extern int menelaus_get_slot_pin_states(void); +extern int menelaus_set_vcore_sw(unsigned int mV); +extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); + +#define EN_VPLL_SLEEP (1 << 7) +#define EN_VMMC_SLEEP (1 << 6) +#define EN_VAUX_SLEEP (1 << 5) +#define EN_VIO_SLEEP (1 << 4) +#define EN_VMEM_SLEEP (1 << 3) +#define EN_DC3_SLEEP (1 << 2) +#define EN_DC2_SLEEP (1 << 1) +#define EN_VC_SLEEP (1 << 0) + +extern int menelaus_set_regulator_sleep(int enable, u32 val); #if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS) #define omap_has_menelaus() 1 @@ -28,4 +47,3 @@ extern int menelaus_get_slot_pin_states(void); #endif #endif - diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h new file mode 100644 index 000000000000..b70e37b61242 --- /dev/null +++ b/include/asm-arm/arch-omap/mmc.h @@ -0,0 +1,66 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP2_MMC_H +#define __OMAP2_MMC_H + +#include +#include +#include + +#define OMAP_MMC_MAX_SLOTS 2 + +struct omap_mmc_platform_data { + unsigned enabled:1; + /* number of slots on board */ + unsigned nr_slots:2; + /* nomux means "standard" muxing is wrong on this board, and that + * board-specific code handled it before common init logic. + */ + unsigned nomux:1; + /* 4 wire signaling is optional, and is only used for SD/SDIO and + * MMCv4 */ + unsigned wire4:1; + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* switch the bus to a new slot */ + int (* switch_slot)(struct device *dev, int slot); + /* initialize board-specific MMC functionality, can be NULL if + * not supported */ + int (* init)(struct device *dev); + void (* cleanup)(struct device *dev); + + struct omap_mmc_slot_data { + int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); + int (* set_power)(struct device *dev, int slot, int power_on, int vdd); + int (* get_ro)(struct device *dev, int slot); + + /* return MMC cover switch state, can be NULL if not supported. + * + * possible return values: + * 0 - open + * 1 - closed + */ + int (* get_cover_state)(struct device *dev, int slot); + + const char *name; + u32 ocr_mask; + } slots[OMAP_MMC_MAX_SLOTS]; +}; + +extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info); + +/* called from board-specific card detection service routine */ +extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected); +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); + +#endif diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index f1ec2edd4040..b8fff50e6a87 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -406,6 +406,29 @@ enum omap1xxx_index { V10_1610_CF_IREQ, W10_1610_CF_RESET, W11_1610_CF_CD1, + + /* parallel camera */ + J15_1610_CAM_LCLK, + J18_1610_CAM_D7, + J19_1610_CAM_D6, + J14_1610_CAM_D5, + K18_1610_CAM_D4, + K19_1610_CAM_D3, + K15_1610_CAM_D2, + K14_1610_CAM_D1, + L19_1610_CAM_D0, + L18_1610_CAM_VS, + L15_1610_CAM_HS, + M19_1610_CAM_RSTZ, + Y15_1610_CAM_OUTCLK, + + /* serial camera */ + H19_1610_CAM_EXCLK, + Y12_1610_CCP_CLKP, + W13_1610_CCP_CLKM, + W14_1610_CCP_DATAP, + Y14_1610_CCP_DATAM, + }; enum omap24xx_index { diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h index 708b2fac77f2..14c0f9496579 100644 --- a/include/asm-arm/arch-omap/omap24xx.h +++ b/include/asm-arm/arch-omap/omap24xx.h @@ -8,6 +8,7 @@ */ #define L4_24XX_BASE 0x48000000 +#define L4_WK_243X_BASE 0x49000000 #define L3_24XX_BASE 0x68000000 /* interrupt controller */ @@ -16,9 +17,20 @@ #define OMAP24XX_IVA_INTC_BASE 0x40000000 #define IRQ_SIR_IRQ 0x0040 +#ifdef CONFIG_ARCH_OMAP2420 #define OMAP24XX_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) #define OMAP24XX_PRCM_BASE (L4_24XX_BASE + 0x8000) #define OMAP24XX_SDRC_BASE (L3_24XX_BASE + 0x9000) +#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +#define OMAP24XX_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) +#define OMAP24XX_PRCM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP24XX_SDRC_BASE (0x6D000000) +#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) +#define OMAP243X_GPMC_BASE 0x6E000000 +#endif /* DSP SS */ #define OMAP24XX_DSP_BASE 0x58000000 diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h new file mode 100644 index 000000000000..6c959d0ce470 --- /dev/null +++ b/include/asm-arm/arch-omap/onenand.h @@ -0,0 +1,21 @@ +/* + * include/asm-arm/arch-omap/onenand.h + * + * Copyright (C) 2006 Nokia Corporation + * Author: Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +struct omap_onenand_platform_data { + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*onenand_setup)(void __iomem *); + int dma_channel; +};