powerpc: Add NAP mode support on Power7 in HV mode

Wakeup comes from the system reset handler with a potential loss of
the non-hypervisor CPU state. We save the non-volatile state on the
stack and a pointer to it in the PACA, which the system reset handler
uses to restore things

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This commit is contained in:
Benjamin Herrenschmidt 2011-01-24 18:42:41 +11:00
parent 9d07bc841c
commit 948cf67c47
7 changed files with 139 additions and 2 deletions

View File

@ -267,6 +267,7 @@ struct machdep_calls {
extern void e500_idle(void);
extern void power4_idle(void);
extern void power7_idle(void);
extern void ppc6xx_idle(void);
extern void book3e_idle(void);

View File

@ -125,7 +125,7 @@ struct paca_struct {
struct task_struct *__current; /* Pointer to current */
u64 kstack; /* Saved Kernel stack addr */
u64 stab_rr; /* stab/slb round-robin counter */
u64 saved_r1; /* r1 save for RTAS calls */
u64 saved_r1; /* r1 save for RTAS calls or PM */
u64 saved_msr; /* MSR saved here by enter_rtas */
u16 trap_save; /* Used when bad stack is encountered */
u8 soft_enabled; /* irq soft-enable flag */

View File

@ -56,6 +56,9 @@
#define PPC_INST_TLBSRX_DOT 0x7c0006a5
#define PPC_INST_XXLOR 0xf0000510
#define PPC_INST_NAP 0x4c000364
#define PPC_INST_SLEEP 0x4c0003a4
/* macros to insert fields into opcodes */
#define __PPC_RA(a) (((a) & 0x1f) << 16)
#define __PPC_RB(b) (((b) & 0x1f) << 11)
@ -126,4 +129,7 @@
#define XXLOR(t, a, b) stringify_in_c(.long PPC_INST_XXLOR | \
VSX_XX3((t), (a), (b)))
#define PPC_NAP stringify_in_c(.long PPC_INST_NAP)
#define PPC_SLEEP stringify_in_c(.long PPC_INST_SLEEP)
#endif /* _ASM_POWERPC_PPC_OPCODE_H */

View File

@ -44,6 +44,7 @@ obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_P7_NAP) += idle_power7.o
obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
procfs-y := proc_powerpc.o

View File

@ -37,7 +37,35 @@
.globl __start_interrupts
__start_interrupts:
STD_EXCEPTION_PSERIES(0x100, 0x100, system_reset)
.globl system_reset_pSeries;
system_reset_pSeries:
HMT_MEDIUM;
DO_KVM 0x100;
SET_SCRATCH0(r13)
#ifdef CONFIG_PPC_P7_NAP
BEGIN_FTR_SECTION
/* Running native on arch 2.06 or later, check if we are
* waking up from nap. We only handle no state loss and
* supervisor state loss. We do -not- handle hypervisor
* state loss at this time.
*/
mfspr r13,SPRN_SRR1
rlwinm r13,r13,47-31,30,31
cmpwi cr0,r13,1
bne 1f
b .power7_wakeup_noloss
1: cmpwi cr0,r13,2
bne 1f
b .power7_wakeup_loss
/* Total loss of HV state is fatal, we could try to use the
* PIR to locate a PACA, then use an emergency stack etc...
* but for now, let's just stay stuck here
*/
1: cmpwi cr0,r13,3
beq .
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE_206)
#endif /* CONFIG_PPC_P7_NAP */
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD)
. = 0x200
_machine_check_pSeries:

View File

@ -0,0 +1,97 @@
/*
* This file contains the power_save function for 970-family CPUs.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ppc-opcode.h>
#undef DEBUG
.text
_GLOBAL(power7_idle)
/* Now check if user or arch enabled NAP mode */
LOAD_REG_ADDRBASE(r3,powersave_nap)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
/* NAP is a state loss, we create a regs frame on the
* stack, fill it up with the state we care about and
* stick a pointer to it in PACAR1. We really only
* need to save PC, some CR bits and the NV GPRs,
* but for now an interrupt frame will do.
*/
mflr r0
std r0,16(r1)
stdu r1,-INT_FRAME_SIZE(r1)
std r0,_LINK(r1)
std r0,_NIP(r1)
#ifndef CONFIG_SMP
/* Make sure FPU, VSX etc... are flushed as we may lose
* state when going to nap mode
*/
bl .discard_lazy_cpu_state
#endif /* CONFIG_SMP */
/* Hard disable interrupts */
mfmsr r9
rldicl r9,r9,48,1
rotldi r9,r9,16
mtmsrd r9,1 /* hard-disable interrupts */
li r0,0
stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */
stb r0,PACAHARDIRQEN(r13)
/* Continue saving state */
SAVE_GPR(2, r1)
SAVE_NVGPRS(r1)
mfcr r3
std r3,_CCR(r1)
std r9,_MSR(r1)
std r1,PACAR1(r13)
/* Magic NAP mode enter sequence */
std r0,0(r1)
ptesync
ld r0,0(r1)
1: cmp cr0,r0,r0
bne 1b
PPC_NAP
b .
_GLOBAL(power7_wakeup_loss)
GET_PACA(r13)
ld r1,PACAR1(r13)
REST_NVGPRS(r1)
REST_GPR(2, r1)
ld r3,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtcr r3
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
_GLOBAL(power7_wakeup_noloss)
GET_PACA(r13)
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid

View File

@ -147,6 +147,10 @@ config PPC_970_NAP
bool
default n
config PPC_P7_NAP
bool
default n
config PPC_INDIRECT_IO
bool
select GENERIC_IOMAP