ARM: 5973/1: ux500: add gpio support

Add support for the GPIOs on the U8500, using the plat-nomadik GPIO
driver.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Rabin Vincent 2010-03-03 04:54:37 +01:00 committed by Russell King
parent 1df20afce5
commit 94bdc0e2d7
6 changed files with 113 additions and 3 deletions

View File

@ -756,6 +756,7 @@ config ARCH_U8500
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
help
Support for ST-Ericsson's Ux500 architecture

View File

@ -8,6 +8,7 @@ config MACH_U8500_MOP
default y
select ARM_GIC
select HAS_MTU
select NOMADIK_GPIO
help
Include support for mop500 development platform
based on U8500 architecture. The platform is based

View File

@ -13,6 +13,7 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@ -23,9 +24,82 @@
#include <mach/hardware.h>
#include <mach/setup.h>
/* add any platform devices here - TODO */
#define GPIO_RESOURCE(block) \
{ \
.start = U8500_GPIOBANK##block##_BASE, \
.end = U8500_GPIOBANK##block##_BASE + 127, \
.flags = IORESOURCE_MEM, \
}, \
{ \
.start = IRQ_GPIO##block, \
.end = IRQ_GPIO##block, \
.flags = IORESOURCE_IRQ, \
}
#define GPIO_DEVICE(block) \
{ \
.name = "gpio", \
.id = block, \
.num_resources = 2, \
.resource = &u8500_gpio_resources[block * 2], \
.dev = { \
.platform_data = &u8500_gpio_data[block], \
}, \
}
#define GPIO_DATA(_name, first) \
{ \
.name = _name, \
.first_gpio = first, \
.first_irq = NOMADIK_GPIO_TO_IRQ(first), \
}
static struct nmk_gpio_platform_data u8500_gpio_data[] = {
GPIO_DATA("GPIO-0-31", 0),
GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
GPIO_DATA("GPIO-64-95", 64),
GPIO_DATA("GPIO-96-127", 96), /* 97..127 not routed to pin */
GPIO_DATA("GPIO-128-159", 128),
GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */
GPIO_DATA("GPIO-192-223", 192),
GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */
GPIO_DATA("GPIO-256-288", 256), /* 258..288 not routed to pin */
};
static struct resource u8500_gpio_resources[] = {
GPIO_RESOURCE(0),
GPIO_RESOURCE(1),
GPIO_RESOURCE(2),
GPIO_RESOURCE(3),
GPIO_RESOURCE(4),
GPIO_RESOURCE(5),
GPIO_RESOURCE(6),
GPIO_RESOURCE(7),
GPIO_RESOURCE(8),
};
static struct platform_device u8500_gpio_devs[] = {
GPIO_DEVICE(0),
GPIO_DEVICE(1),
GPIO_DEVICE(2),
GPIO_DEVICE(3),
GPIO_DEVICE(4),
GPIO_DEVICE(5),
GPIO_DEVICE(6),
GPIO_DEVICE(7),
GPIO_DEVICE(8),
};
static struct platform_device *platform_devs[] __initdata = {
/* yet to be added, add i2c0, gpio.. */
&u8500_gpio_devs[0],
&u8500_gpio_devs[1],
&u8500_gpio_devs[2],
&u8500_gpio_devs[3],
&u8500_gpio_devs[4],
&u8500_gpio_devs[5],
&u8500_gpio_devs[6],
&u8500_gpio_devs[7],
&u8500_gpio_devs[8],
};
#define __IO_DEV_DESC(x, sz) { \
@ -49,6 +123,10 @@ static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO5_BASE, SZ_4K),
};
static struct map_desc u8500ed_io_desc[] __initdata = {

View File

@ -0,0 +1,12 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
/*
* 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
* room for a couple of GPIO expanders.
*/
#define ARCH_NR_GPIOS 350
#include <plat/gpio.h>
#endif /* __ASM_ARCH_GPIO_H */

View File

@ -23,6 +23,8 @@
/* typesafe io address */
#define __io_address(n) __io(IO_ADDRESS(n))
/* used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)
/*
* Base address definitions for U8500 Onchip IPs. All the
@ -128,6 +130,16 @@
#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
#define U8500_GPIOBANK0_BASE U8500_GPIO1_BASE
#define U8500_GPIOBANK1_BASE (U8500_GPIO1_BASE + 0x80)
#define U8500_GPIOBANK2_BASE U8500_GPIO3_BASE
#define U8500_GPIOBANK3_BASE (U8500_GPIO3_BASE + 0x80)
#define U8500_GPIOBANK4_BASE (U8500_GPIO3_BASE + 0x100)
#define U8500_GPIOBANK5_BASE (U8500_GPIO3_BASE + 0x180)
#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE
#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
#define U8500_GPIOBANK8_BASE U8500_GPIO5_BASE
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022

View File

@ -66,6 +66,12 @@
/* There are 128 shared peripheral interrupts assigned to
* INTID[160:32]. The first 32 interrupts are reserved.
*/
#define NR_IRQS 161
#define U8500_SOC_NR_IRQS 161
/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO 288
#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS)
#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS)
#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
#endif /*ASM_ARCH_IRQS_H*/