PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory

Group all the PCI drivers that use DesignWare core in dwc directory.
dwc IP is capable of operating in both host mode and device mode and
keeping it inside the *host* directory is misleading.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
This commit is contained in:
Kishon Vijay Abraham I 2017-01-06 18:22:48 +05:30 committed by Bjorn Helgaas
parent 656795c887
commit 950bf6388b
22 changed files with 155 additions and 136 deletions

View File

@ -9429,7 +9429,7 @@ L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: Documentation/devicetree/bindings/pci/pci-armada8k.txt
F: drivers/pci/host/pcie-armada8k.c
F: drivers/pci/dwc/pcie-armada8k.c
PCI DRIVER FOR APPLIEDMICRO XGENE
M: Tanmay Inamdar <tinamdar@apm.com>
@ -9447,7 +9447,7 @@ L: linuxppc-dev@lists.ozlabs.org
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: drivers/pci/host/*layerscape*
F: drivers/pci/dwc/*layerscape*
PCI DRIVER FOR IMX6
M: Richard Zhu <hongxing.zhu@nxp.com>
@ -9456,14 +9456,14 @@ L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
F: drivers/pci/host/*imx6*
F: drivers/pci/dwc/*imx6*
PCI DRIVER FOR TI KEYSTONE
M: Murali Karicheri <m-karicheri2@ti.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/*keystone*
F: drivers/pci/dwc/*keystone*
PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
@ -9495,7 +9495,7 @@ L: linux-omap@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/ti-pci.txt
F: drivers/pci/host/pci-dra7xx.c
F: drivers/pci/dwc/pci-dra7xx.c
PCI DRIVER FOR RENESAS R-CAR
M: Simon Horman <horms@verge.net.au>
@ -9510,7 +9510,7 @@ L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/pci-exynos.c
F: drivers/pci/dwc/pci-exynos.c
PCI DRIVER FOR SYNOPSIS DESIGNWARE
M: Jingoo Han <jingoohan1@gmail.com>
@ -9518,7 +9518,7 @@ M: Joao Pinto <Joao.Pinto@synopsys.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/designware-pcie.txt
F: drivers/pci/host/*designware*
F: drivers/pci/dwc/*designware*
PCI DRIVER FOR GENERIC OF HOSTS
M: Will Deacon <will.deacon@arm.com>
@ -9539,7 +9539,7 @@ PCIE DRIVER FOR ST SPEAR13XX
M: Pratyush Anand <pratyush.anand@gmail.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
F: drivers/pci/dwc/*spear*
PCI MSI DRIVER FOR ALTERA MSI IP
M: Ley Foon Tan <lftan@altera.com>
@ -9564,7 +9564,7 @@ L: linux-arm-kernel@axis.com
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/axis,artpec*
F: drivers/pci/host/*artpec*
F: drivers/pci/dwc/*artpec*
PCIE DRIVER FOR HISILICON
M: Zhou Wang <wangzhou1@hisilicon.com>
@ -9572,7 +9572,7 @@ M: Gabriele Paoloni <gabriele.paoloni@huawei.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
F: drivers/pci/host/pcie-hisi.c
F: drivers/pci/dwc/pcie-hisi.c
PCIE DRIVER FOR ROCKCHIP
M: Shawn Lin <shawn.lin@rock-chips.com>
@ -9588,7 +9588,7 @@ M: Stanimir Varbanov <svarbanov@mm-sol.com>
L: linux-pci@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/pci/host/*qcom*
F: drivers/pci/dwc/*qcom*
PCIE DRIVER FOR CAVIUM THUNDERX
M: David Daney <david.daney@cavium.com>

View File

@ -132,4 +132,5 @@ config PCI_HYPERV
PCI devices from a PCI backend to support PCI driver domains.
source "drivers/pci/hotplug/Kconfig"
source "drivers/pci/dwc/Kconfig"
source "drivers/pci/host/Kconfig"

View File

@ -66,5 +66,8 @@ obj-$(CONFIG_OF) += of.o
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
# PCI dwc controller drivers
obj-y += dwc/
# PCI host controller drivers
obj-y += host/

117
drivers/pci/dwc/Kconfig Normal file
View File

@ -0,0 +1,117 @@
menu "DesignWare PCI Core Support"
depends on PCI
config PCIE_DW
bool
depends on PCI_MSI_IRQ_DOMAIN
config PCI_DRA7XX
bool "TI DRA7xx PCIe controller"
depends on OF && HAS_IOMEM && TI_PIPE3
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
help
Enables support for the PCIe controller in the DRA7xx SoC. There
are two instances of PCIe controller in DRA7xx. This controller can
act both as EP and RC. This reuses the Designware core.
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
---help---
This selects the DesignWare PCIe controller support. Select this if
you have a PCIe controller on Platform bus.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
config PCI_IMX6
bool "Freescale i.MX6 PCIe controller"
depends on SOC_IMX6Q
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
config PCIE_SPEAR13XX
bool "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want PCIe support on SPEAr13XX SoCs.
config PCI_KEYSTONE
bool "TI Keystone PCIe controller"
depends on ARCH_KEYSTONE
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want to enable PCI controller support on Keystone
SoCs. The PCI controller on Keystone is based on Designware hardware
and therefore the driver re-uses the Designware core functions to
implement the driver.
config PCI_LAYERSCAPE
bool "Freescale Layerscape PCIe controller"
depends on OF && (ARM || ARCH_LAYERSCAPE)
depends on PCI_MSI_IRQ_DOMAIN
select MFD_SYSCON
select PCIE_DW
help
Say Y here if you want PCIe controller support on Layerscape SoCs.
config PCI_HISI
depends on OF && ARM64
bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want PCIe controller support on HiSilicon
Hip05 and Hip06 SoCs
config PCIE_QCOM
bool "Qualcomm PCIe controller"
depends on ARCH_QCOM && OF
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here to enable PCIe controller support on Qualcomm SoCs. The
PCIe controller uses the Designware core plus Qualcomm-specific
hardware wrappers.
config PCIE_ARMADA_8K
bool "Marvell Armada-8K PCIe controller"
depends on ARCH_MVEBU
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want to enable PCIe controller support on
Armada-8K SoCs. The PCIe controller on Armada-8K is based on
Designware hardware and therefore the driver re-uses the
Designware core functions to implement the driver.
config PCIE_ARTPEC6
bool "Axis ARTPEC-6 PCIe controller"
depends on MACH_ARTPEC6
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here to enable PCIe controller support on Axis ARTPEC-6
SoCs. This PCIe controller uses the DesignWare core.
endmenu

23
drivers/pci/dwc/Makefile Normal file
View File

@ -0,0 +1,23 @@
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
# The following drivers are for devices that use the generic ACPI
# pci_root.c driver but don't support standard ECAM config access.
# They contain MCFG quirks to replace the generic ECAM accessors with
# device-specific ones that are shared with the DT driver.
# The ACPI driver is generic and should not require driver-specific
# config options to be enabled, so we always build these drivers on
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.
obj-$(CONFIG_ARM64) += pcie-hisi.o

View File

@ -1,16 +1,6 @@
menu "PCI host controller drivers"
depends on PCI
config PCI_DRA7XX
bool "TI DRA7xx PCIe controller"
depends on OF && HAS_IOMEM && TI_PIPE3
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
help
Enables support for the PCIe controller in the DRA7xx SoC. There
are two instances of PCIe controller in DRA7xx. This controller can
act both as EP and RC. This reuses the Designware core.
config PCI_MVEBU
bool "Marvell EBU PCIe controller"
depends on ARCH_MVEBU || ARCH_DOVE
@ -37,36 +27,6 @@ config PCIE_XILINX_NWL
or End Point. The current option selection will only
support root port enabling.
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
---help---
This selects the DesignWare PCIe controller support. Select this if
you have a PCIe controller on Platform bus.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config PCIE_DW
bool
depends on PCI_MSI_IRQ_DOMAIN
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
config PCI_IMX6
bool "Freescale i.MX6 PCIe controller"
depends on SOC_IMX6Q
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
config PCI_TEGRA
bool "NVIDIA Tegra PCIe controller"
depends on ARCH_TEGRA
@ -103,27 +63,6 @@ config PCI_HOST_GENERIC
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
config PCIE_SPEAR13XX
bool "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want PCIe support on SPEAr13XX SoCs.
config PCI_KEYSTONE
bool "TI Keystone PCIe controller"
depends on ARCH_KEYSTONE
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
Say Y here if you want to enable PCI controller support on Keystone
SoCs. The PCI controller on Keystone is based on Designware hardware
and therefore the driver re-uses the Designware core functions to
implement the driver.
config PCIE_XILINX
bool "Xilinx AXI PCIe host bridge support"
depends on ARCH_ZYNQ || MICROBLAZE
@ -150,15 +89,6 @@ config PCI_XGENE_MSI
Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC.
config PCI_LAYERSCAPE
bool "Freescale Layerscape PCIe controller"
depends on OF && (ARM || ARCH_LAYERSCAPE)
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select MFD_SYSCON
help
Say Y here if you want PCIe controller support on Layerscape SoCs.
config PCI_VERSATILE
bool "ARM Versatile PB PCI controller"
depends on ARCH_VERSATILE
@ -217,27 +147,6 @@ config PCIE_ALTERA_MSI
Say Y here if you want PCIe MSI support for the Altera FPGA.
This MSI driver supports Altera MSI to GIC controller IP.
config PCI_HISI
depends on OF && ARM64
bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want PCIe controller support on HiSilicon
Hip05 and Hip06 SoCs
config PCIE_QCOM
bool "Qualcomm PCIe controller"
depends on ARCH_QCOM && OF
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
Say Y here to enable PCIe controller support on Qualcomm SoCs. The
PCIe controller uses the Designware core plus Qualcomm-specific
hardware wrappers.
config PCI_HOST_THUNDER_PEM
bool "Cavium Thunder PCIe controller to off-chip devices"
depends on ARM64
@ -254,28 +163,6 @@ config PCI_HOST_THUNDER_ECAM
help
Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
config PCIE_ARMADA_8K
bool "Marvell Armada-8K PCIe controller"
depends on ARCH_MVEBU
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
Say Y here if you want to enable PCIe controller support on
Armada-8K SoCs. The PCIe controller on Armada-8K is based on
Designware hardware and therefore the driver re-uses the
Designware core functions to implement the driver.
config PCIE_ARTPEC6
bool "Axis ARTPEC-6 PCIe controller"
depends on MACH_ARTPEC6
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
Say Y here to enable PCIe controller support on Axis ARTPEC-6
SoCs. This PCIe controller uses the DesignWare core.
config PCIE_ROCKCHIP
bool "Rockchip PCIe controller"
depends on ARCH_ROCKCHIP || COMPILE_TEST

View File

@ -1,8 +1,3 @@
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
@ -11,12 +6,9 @@ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
@ -24,9 +16,6 @@ obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
obj-$(CONFIG_VMD) += vmd.o
@ -40,7 +29,6 @@ obj-$(CONFIG_VMD) += vmd.o
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.
obj-$(CONFIG_ARM64) += pcie-hisi.o
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
obj-$(CONFIG_ARM64) += pci-xgene.o