pata_it821x: Driver updates and reworking

- Add support for the RDC 1010 variant
- Rework the core library to have a read_id method. This allows the hacky
  bits of it821x to go and prepares us for pata_hd
- Switch from WARN to BUG in ata_id_string as it will reboot if you get
  it wrong so WARN won't be seen
- Allow the issue of command 0xFC on the 821x. This is needed to query
  rebuild status.
- Tidy up printk formatting
- Do more ident rewriting on RAID volumes to handle firmware provided
  ident data which is rather wonky
- Report the firmware revision and device layout in RAID mode
- Don't try and disable raid on the 8211 or RDC - they don't have the
  relevant bits

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Alan Cox 2008-07-24 17:16:06 +01:00 committed by Jeff Garzik
parent 1f938d060a
commit 963e4975c6
3 changed files with 266 additions and 40 deletions

View File

@ -1132,6 +1132,8 @@ void ata_id_string(const u16 *id, unsigned char *s,
{
unsigned int c;
BUG_ON(len & 1);
while (len > 0) {
c = id[ofs] >> 8;
*s = c;
@ -1165,8 +1167,6 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
{
unsigned char *p;
WARN_ON(!(len & 1));
ata_id_string(id, s, ofs, len - 1);
p = s + strnlen(s, len - 1);
@ -1885,6 +1885,23 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
return 3 << ATA_SHIFT_PIO;
}
/**
* ata_do_dev_read_id - default ID read method
* @dev: device
* @tf: proposed taskfile
* @id: data buffer
*
* Issue the identify taskfile and hand back the buffer containing
* identify data. For some RAID controllers and for pre ATA devices
* this function is wrapped or replaced by the driver
*/
unsigned int ata_do_dev_read_id(struct ata_device *dev,
struct ata_taskfile *tf, u16 *id)
{
return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS, 0);
}
/**
* ata_dev_read_id - Read ID data from the specified device
* @dev: target device
@ -1920,7 +1937,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
if (ata_msg_ctl(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
retry:
retry:
ata_tf_init(dev, &tf);
switch (class) {
@ -1948,8 +1965,11 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
*/
tf.flags |= ATA_TFLAG_POLLING;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS, 0);
if (ap->ops->read_id)
err_mask = ap->ops->read_id(dev, &tf, id);
else
err_mask = ata_do_dev_read_id(dev, &tf, id);
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
ata_dev_printk(dev, KERN_DEBUG,
@ -6283,6 +6303,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);

View File

@ -80,7 +80,7 @@
#define DRV_NAME "pata_it821x"
#define DRV_VERSION "0.3.8"
#define DRV_VERSION "0.4.0"
struct it821x_dev
{
@ -425,6 +425,8 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
case ATA_CMD_WRITE_MULTI:
case ATA_CMD_WRITE_MULTI_EXT:
case ATA_CMD_ID_ATA:
case ATA_CMD_INIT_DEV_PARAMS:
case 0xFC: /* Internal 'report rebuild state' */
/* Arguably should just no-op this one */
case ATA_CMD_SET_FEATURES:
return ata_sff_qc_issue(qc);
@ -509,7 +511,7 @@ static void it821x_dev_config(struct ata_device *adev)
if (strstr(model_num, "Integrated Technology Express")) {
/* RAID mode */
printk(KERN_INFO "IT821x %sRAID%d volume",
ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume",
adev->id[147]?"Bootable ":"",
adev->id[129]);
if (adev->id[129] != 1)
@ -519,36 +521,50 @@ static void it821x_dev_config(struct ata_device *adev)
/* This is a controller firmware triggered funny, don't
report the drive faulty! */
adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC;
/* No HPA in 'smart' mode */
adev->horkage |= ATA_HORKAGE_BROKEN_HPA;
}
/**
* it821x_ident_hack - Hack identify data up
* @ap: Port
* it821x_read_id - Hack identify data up
* @adev: device to read
* @tf: proposed taskfile
* @id: buffer for returned ident data
*
* Walk the devices on this firmware driven port and slightly
* Query the devices on this firmware driven port and slightly
* mash the identify data to stop us and common tools trying to
* use features not firmware supported. The firmware itself does
* some masking (eg SMART) but not enough.
*
* This is a bit of an abuse of the cable method, but it is the
* only method called at the right time. We could modify the libata
* core specifically for ident hacking but while we have one offender
* it seems better to keep the fallout localised.
*/
static int it821x_ident_hack(struct ata_port *ap)
static unsigned int it821x_read_id(struct ata_device *adev,
struct ata_taskfile *tf, u16 *id)
{
struct ata_device *adev;
ata_link_for_each_dev(adev, &ap->link) {
if (ata_dev_enabled(adev)) {
adev->id[84] &= ~(1 << 6); /* No FUA */
adev->id[85] &= ~(1 << 10); /* No HPA */
adev->id[76] = 0; /* No NCQ/AN etc */
}
}
return ata_cable_unknown(ap);
}
unsigned int err_mask;
unsigned char model_num[ATA_ID_PROD_LEN + 1];
err_mask = ata_do_dev_read_id(adev, tf, id);
if (err_mask)
return err_mask;
ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num));
id[83] &= ~(1 << 12); /* Cache flush is firmware handled */
id[83] &= ~(1 << 13); /* Ditto for LBA48 flushes */
id[84] &= ~(1 << 6); /* No FUA */
id[85] &= ~(1 << 10); /* No HPA */
id[76] = 0; /* No NCQ/AN etc */
if (strstr(model_num, "Integrated Technology Express")) {
/* Set feature bits the firmware neglects */
id[49] |= 0x0300; /* LBA, DMA */
id[82] |= 0x0400; /* LBA48 */
id[83] &= 0x7FFF;
id[83] |= 0x4000; /* Word 83 is valid */
id[86] |= 0x0400; /* LBA48 on */
id[ATA_ID_MAJOR_VER] |= 0x1F;
}
return err_mask;
}
/**
* it821x_check_atapi_dma - ATAPI DMA handler
@ -577,6 +593,136 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
return 0;
}
/**
* it821x_display_disk - display disk setup
* @n: Device number
* @buf: Buffer block from firmware
*
* Produce a nice informative display of the device setup as provided
* by the firmware.
*/
static void it821x_display_disk(int n, u8 *buf)
{
unsigned char id[41];
int mode = 0;
char *mtype;
char mbuf[8];
char *cbl = "(40 wire cable)";
static const char *types[5] = {
"RAID0", "RAID1" "RAID 0+1", "JBOD", "DISK"
};
if (buf[52] > 4) /* No Disk */
return;
ata_id_c_string((u16 *)buf, id, 0, 41);
if (buf[51]) {
mode = ffs(buf[51]);
mtype = "UDMA";
} else if (buf[49]) {
mode = ffs(buf[49]);
mtype = "MWDMA";
}
if (buf[76])
cbl = "";
if (mode)
snprintf(mbuf, 8, "%5s%d", mtype, mode - 1);
else
strcpy(mbuf, "PIO");
if (buf[52] == 4)
printk(KERN_INFO "%d: %-6s %-8s %s %s\n",
n, mbuf, types[buf[52]], id, cbl);
else
printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n",
n, mbuf, types[buf[52]], buf[53], id, cbl);
if (buf[125] < 100)
printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]);
}
/**
* it821x_firmware_command - issue firmware command
* @ap: IT821x port to interrogate
* @cmd: command
* @len: length
*
* Issue firmware commands expecting data back from the controller. We
* use this to issue commands that do not go via the normal paths. Other
* commands such as 0xFC can be issued normally.
*/
static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
{
u8 status;
int n = 0;
u16 *buf = kmalloc(len, GFP_KERNEL);
if (buf == NULL) {
printk(KERN_ERR "it821x_firmware_command: Out of memory\n");
return NULL;
}
/* This isn't quite a normal ATA command as we are talking to the
firmware not the drives */
ap->ctl |= ATA_NIEN;
iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
ata_wait_idle(ap);
iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
iowrite8(cmd, ap->ioaddr.command_addr);
udelay(1);
/* This should be almost immediate but a little paranoia goes a long
way. */
while(n++ < 10) {
status = ioread8(ap->ioaddr.status_addr);
if (status & ATA_ERR) {
kfree(buf);
printk(KERN_ERR "it821x_firmware_command: rejected\n");
return NULL;
}
if (status & ATA_DRQ) {
ioread16_rep(ap->ioaddr.data_addr, buf, len/2);
return (u8 *)buf;
}
mdelay(1);
}
kfree(buf);
printk(KERN_ERR "it821x_firmware_command: timeout\n");
return NULL;
}
/**
* it821x_probe_firmware - firmware reporting/setup
* @ap: IT821x port being probed
*
* Probe the firmware of the controller by issuing firmware command
* 0xFA and analysing the returned data.
*/
static void it821x_probe_firmware(struct ata_port *ap)
{
u8 *buf;
int i;
/* This is a bit ugly as we can't just issue a task file to a device
as this is controller magic */
buf = it821x_firmware_command(ap, 0xFA, 512);
if (buf != NULL) {
printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n",
buf[505],
buf[506],
buf[507],
buf[508]);
for (i = 0; i < 4; i++)
it821x_display_disk(i, buf + 128 * i);
kfree(buf);
}
}
/**
* it821x_port_start - port setup
@ -610,6 +756,8 @@ static int it821x_port_start(struct ata_port *ap)
/* Long I/O's although allowed in LBA48 space cause the
onboard firmware to enter the twighlight zone */
/* No ATAPI DMA in this mode either */
if (ap->port_no == 0)
it821x_probe_firmware(ap);
}
/* Pull the current clocks from 0x50 */
if (conf & (1 << (1 + ap->port_no)))
@ -631,6 +779,25 @@ static int it821x_port_start(struct ata_port *ap)
return 0;
}
/**
* it821x_rdc_cable - Cable detect for RDC1010
* @ap: port we are checking
*
* Return the RDC1010 cable type. Unlike the IT821x we know how to do
* this and can do host side cable detect
*/
static int it821x_rdc_cable(struct ata_port *ap)
{
u16 r40;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
pci_read_config_word(pdev, 0x40, &r40);
if (r40 & (1 << (2 + ap->port_no)))
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
}
static struct scsi_host_template it821x_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
@ -641,9 +808,10 @@ static struct ata_port_operations it821x_smart_port_ops = {
.check_atapi_dma= it821x_check_atapi_dma,
.qc_issue = it821x_smart_qc_issue,
.cable_detect = it821x_ident_hack,
.cable_detect = ata_cable_80wire,
.set_mode = it821x_smart_set_mode,
.dev_config = it821x_dev_config,
.read_id = it821x_read_id,
.port_start = it821x_port_start,
};
@ -664,8 +832,29 @@ static struct ata_port_operations it821x_passthru_port_ops = {
.port_start = it821x_port_start,
};
static struct ata_port_operations it821x_rdc_port_ops = {
.inherits = &ata_bmdma_port_ops,
.check_atapi_dma= it821x_check_atapi_dma,
.sff_dev_select = it821x_passthru_dev_select,
.bmdma_start = it821x_passthru_bmdma_start,
.bmdma_stop = it821x_passthru_bmdma_stop,
.qc_issue = it821x_passthru_qc_issue,
.cable_detect = it821x_rdc_cable,
.set_piomode = it821x_passthru_set_piomode,
.set_dmamode = it821x_passthru_set_dmamode,
.port_start = it821x_port_start,
};
static void it821x_disable_raid(struct pci_dev *pdev)
{
/* Neither the RDC nor the IT8211 */
if (pdev->vendor != PCI_VENDOR_ID_ITE ||
pdev->device != PCI_DEVICE_ID_ITE_8212)
return;
/* Reset local CPU, and set BIOS not ready */
pci_write_config_byte(pdev, 0x5E, 0x01);
@ -690,6 +879,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6,
.port_ops = &it821x_smart_port_ops
};
static const struct ata_port_info info_passthru = {
@ -699,6 +889,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA6,
.port_ops = &it821x_passthru_port_ops
};
static const struct ata_port_info info_rdc = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
/* No UDMA */
.port_ops = &it821x_rdc_port_ops
};
const struct ata_port_info *ppi[] = { NULL, NULL };
static char *mode[2] = { "pass through", "smart" };
@ -707,21 +904,25 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
rc = pcim_enable_device(pdev);
if (rc)
return rc;
if (pdev->vendor == PCI_VENDOR_ID_RDC) {
ppi[0] = &info_rdc;
} else {
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
it821x_disable_raid(pdev);
}
pci_read_config_byte(pdev, 0x50, &conf);
conf &= 1;
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
it821x_disable_raid(pdev);
printk(KERN_INFO DRV_NAME": controller in %s mode.\n",
mode[conf]);
if (conf == 0)
ppi[0] = &info_passthru;
else
ppi[0] = &info_smart;
}
pci_read_config_byte(pdev, 0x50, &conf);
conf &= 1;
printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
if (conf == 0)
ppi[0] = &info_passthru;
else
ppi[0] = &info_smart;
return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
}
@ -745,6 +946,7 @@ static int it821x_reinit_one(struct pci_dev *pdev)
static const struct pci_device_id it821x[] = {
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
{ PCI_VDEVICE(RDC, 0x1010), },
{ },
};

View File

@ -750,6 +750,7 @@ struct ata_port_operations {
void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
int (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
void (*dev_config)(struct ata_device *dev);
@ -951,6 +952,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
struct ata_taskfile *tf, u16 *id);
extern void ata_qc_complete(struct ata_queued_cmd *qc);
extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,