Merge branch 'isdn-cleanup' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
* 'isdn-cleanup' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] HiSax hfc_pci: minor cleanups [ISDN] HiSax bkm_a4t: split setup into two smaller functions [ISDN] HiSax enternow: split setup into 3 smaller functions [ISDN] HiSax netjet_u: split setup into 3 smaller functions [ISDN] HiSax netjet_s: code movement, prep for hotplug [ISDN] HiSax: move card state alloc/setup code into separate functions [ISDN] HiSax: move card setup into separate function
This commit is contained in:
commit
96a6099d2f
|
@ -255,28 +255,11 @@ BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
|
|||
return (0);
|
||||
}
|
||||
|
||||
static struct pci_dev *dev_a4t __devinitdata = NULL;
|
||||
|
||||
int __devinit
|
||||
setup_bkm_a4t(struct IsdnCard *card)
|
||||
static int __devinit a4t_pci_probe(struct pci_dev *dev_a4t,
|
||||
struct IsdnCardState *cs,
|
||||
u_int *found,
|
||||
u_int *pci_memaddr)
|
||||
{
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
u_int pci_memaddr = 0, found = 0;
|
||||
I20_REGISTER_FILE *pI20_Regs;
|
||||
#ifdef CONFIG_PCI
|
||||
#endif
|
||||
|
||||
strcpy(tmp, bkm_a4t_revision);
|
||||
printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ == ISDN_CTYPE_BKM_A4T) {
|
||||
cs->subtyp = BKM_A4T;
|
||||
} else
|
||||
return (0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN,
|
||||
PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
|
||||
u16 sub_sys;
|
||||
u16 sub_vendor;
|
||||
|
||||
|
@ -284,25 +267,26 @@ setup_bkm_a4t(struct IsdnCard *card)
|
|||
sub_sys = dev_a4t->subsystem_device;
|
||||
if ((sub_sys == PCI_DEVICE_ID_BERKOM_A4T) && (sub_vendor == PCI_VENDOR_ID_BERKOM)) {
|
||||
if (pci_enable_device(dev_a4t))
|
||||
return(0);
|
||||
found = 1;
|
||||
pci_memaddr = pci_resource_start(dev_a4t, 0);
|
||||
return (0); /* end loop & function */
|
||||
*found = 1;
|
||||
*pci_memaddr = pci_resource_start(dev_a4t, 0);
|
||||
cs->irq = dev_a4t->irq;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (!found) {
|
||||
printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
|
||||
return (0);
|
||||
return (1); /* end loop */
|
||||
}
|
||||
|
||||
return (-1); /* continue looping */
|
||||
}
|
||||
|
||||
static int __devinit a4t_cs_init(struct IsdnCard *card,
|
||||
struct IsdnCardState *cs,
|
||||
u_int pci_memaddr)
|
||||
{
|
||||
I20_REGISTER_FILE *pI20_Regs;
|
||||
|
||||
if (!cs->irq) { /* IRQ range check ?? */
|
||||
printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
|
||||
return (0);
|
||||
}
|
||||
if (!pci_memaddr) {
|
||||
printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
|
||||
return (0);
|
||||
}
|
||||
cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
|
||||
/* Check suspecious address */
|
||||
pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
|
||||
|
@ -317,11 +301,7 @@ setup_bkm_a4t(struct IsdnCard *card)
|
|||
cs->hw.ax.jade_adr = cs->hw.ax.base + PO_OFFSET;
|
||||
cs->hw.ax.isac_ale = GCS_1;
|
||||
cs->hw.ax.jade_ale = GCS_3;
|
||||
#else
|
||||
printk(KERN_WARNING "HiSax: %s: NO_PCI_BIOS\n", CardType[card->typ]);
|
||||
printk(KERN_WARNING "HiSax: %s: unable to configure\n", CardType[card->typ]);
|
||||
return (0);
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
|
||||
CardType[card->typ], cs->hw.ax.base, cs->irq);
|
||||
|
||||
|
@ -339,5 +319,43 @@ setup_bkm_a4t(struct IsdnCard *card)
|
|||
ISACVersion(cs, "Telekom A4T:");
|
||||
/* Jade version */
|
||||
JadeVersion(cs, "Telekom A4T:");
|
||||
|
||||
return (1);
|
||||
}
|
||||
|
||||
static struct pci_dev *dev_a4t __devinitdata = NULL;
|
||||
|
||||
int __devinit
|
||||
setup_bkm_a4t(struct IsdnCard *card)
|
||||
{
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
u_int pci_memaddr = 0, found = 0;
|
||||
int ret;
|
||||
|
||||
strcpy(tmp, bkm_a4t_revision);
|
||||
printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ == ISDN_CTYPE_BKM_A4T) {
|
||||
cs->subtyp = BKM_A4T;
|
||||
} else
|
||||
return (0);
|
||||
|
||||
while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN,
|
||||
PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
|
||||
ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr);
|
||||
if (!ret)
|
||||
return (0);
|
||||
if (ret > 0)
|
||||
break;
|
||||
}
|
||||
if (!found) {
|
||||
printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
|
||||
return (0);
|
||||
}
|
||||
if (!pci_memaddr) {
|
||||
printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
|
||||
return (0);
|
||||
}
|
||||
|
||||
return a4t_cs_init(card, cs, pci_memaddr);
|
||||
}
|
||||
|
|
|
@ -847,95 +847,10 @@ static int init_card(struct IsdnCardState *cs)
|
|||
return 3;
|
||||
}
|
||||
|
||||
static int checkcard(int cardnr, char *id, int *busy_flag, struct module *lockowner)
|
||||
static int hisax_cs_setup_card(struct IsdnCard *card)
|
||||
{
|
||||
int ret = 0;
|
||||
struct IsdnCard *card = cards + cardnr;
|
||||
struct IsdnCardState *cs;
|
||||
int ret;
|
||||
|
||||
cs = kzalloc(sizeof(struct IsdnCardState), GFP_ATOMIC);
|
||||
if (!cs) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: No memory for IsdnCardState(card %d)\n",
|
||||
cardnr + 1);
|
||||
goto out;
|
||||
}
|
||||
card->cs = cs;
|
||||
spin_lock_init(&cs->statlock);
|
||||
spin_lock_init(&cs->lock);
|
||||
cs->chanlimit = 2; /* maximum B-channel number */
|
||||
cs->logecho = 0; /* No echo logging */
|
||||
cs->cardnr = cardnr;
|
||||
cs->debug = L1_DEB_WARN;
|
||||
cs->HW_Flags = 0;
|
||||
cs->busy_flag = busy_flag;
|
||||
cs->irq_flags = I4L_IRQ_FLAG;
|
||||
#if TEI_PER_CARD
|
||||
if (card->protocol == ISDN_PTYPE_NI1)
|
||||
test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
|
||||
#else
|
||||
test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
|
||||
#endif
|
||||
cs->protocol = card->protocol;
|
||||
|
||||
if (card->typ <= 0 || card->typ > ISDN_CTYPE_COUNT) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: Card Type %d out of range\n", card->typ);
|
||||
goto outf_cs;
|
||||
}
|
||||
if (!(cs->dlog = kmalloc(MAX_DLOG_SPACE, GFP_ATOMIC))) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: No memory for dlog(card %d)\n", cardnr + 1);
|
||||
goto outf_cs;
|
||||
}
|
||||
if (!(cs->status_buf = kmalloc(HISAX_STATUS_BUFSIZE, GFP_ATOMIC))) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: No memory for status_buf(card %d)\n",
|
||||
cardnr + 1);
|
||||
goto outf_dlog;
|
||||
}
|
||||
cs->stlist = NULL;
|
||||
cs->status_read = cs->status_buf;
|
||||
cs->status_write = cs->status_buf;
|
||||
cs->status_end = cs->status_buf + HISAX_STATUS_BUFSIZE - 1;
|
||||
cs->typ = card->typ;
|
||||
#ifdef MODULE
|
||||
cs->iif.owner = lockowner;
|
||||
#endif
|
||||
strcpy(cs->iif.id, id);
|
||||
cs->iif.channels = 2;
|
||||
cs->iif.maxbufsize = MAX_DATA_SIZE;
|
||||
cs->iif.hl_hdrlen = MAX_HEADER_LEN;
|
||||
cs->iif.features =
|
||||
ISDN_FEATURE_L2_X75I |
|
||||
ISDN_FEATURE_L2_HDLC |
|
||||
ISDN_FEATURE_L2_HDLC_56K |
|
||||
ISDN_FEATURE_L2_TRANS |
|
||||
ISDN_FEATURE_L3_TRANS |
|
||||
#ifdef CONFIG_HISAX_1TR6
|
||||
ISDN_FEATURE_P_1TR6 |
|
||||
#endif
|
||||
#ifdef CONFIG_HISAX_EURO
|
||||
ISDN_FEATURE_P_EURO |
|
||||
#endif
|
||||
#ifdef CONFIG_HISAX_NI1
|
||||
ISDN_FEATURE_P_NI1 |
|
||||
#endif
|
||||
0;
|
||||
|
||||
cs->iif.command = HiSax_command;
|
||||
cs->iif.writecmd = NULL;
|
||||
cs->iif.writebuf_skb = HiSax_writebuf_skb;
|
||||
cs->iif.readstat = HiSax_readstatus;
|
||||
register_isdn(&cs->iif);
|
||||
cs->myid = cs->iif.channels;
|
||||
printk(KERN_INFO
|
||||
"HiSax: Card %d Protocol %s Id=%s (%d)\n", cardnr + 1,
|
||||
(card->protocol == ISDN_PTYPE_1TR6) ? "1TR6" :
|
||||
(card->protocol == ISDN_PTYPE_EURO) ? "EDSS1" :
|
||||
(card->protocol == ISDN_PTYPE_LEASED) ? "LEASED" :
|
||||
(card->protocol == ISDN_PTYPE_NI1) ? "NI1" :
|
||||
"NONE", cs->iif.id, cs->myid);
|
||||
switch (card->typ) {
|
||||
#if CARD_TELES0
|
||||
case ISDN_CTYPE_16_0:
|
||||
|
@ -1094,13 +1009,115 @@ static int checkcard(int cardnr, char *id, int *busy_flag, struct module *lockow
|
|||
printk(KERN_WARNING
|
||||
"HiSax: Support for %s Card not selected\n",
|
||||
CardType[card->typ]);
|
||||
ll_unload(cs);
|
||||
ret = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int hisax_cs_new(int cardnr, char *id, struct IsdnCard *card,
|
||||
struct IsdnCardState **cs_out, int *busy_flag,
|
||||
struct module *lockowner)
|
||||
{
|
||||
struct IsdnCardState *cs;
|
||||
|
||||
*cs_out = NULL;
|
||||
|
||||
cs = kzalloc(sizeof(struct IsdnCardState), GFP_ATOMIC);
|
||||
if (!cs) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: No memory for IsdnCardState(card %d)\n",
|
||||
cardnr + 1);
|
||||
goto out;
|
||||
}
|
||||
card->cs = cs;
|
||||
spin_lock_init(&cs->statlock);
|
||||
spin_lock_init(&cs->lock);
|
||||
cs->chanlimit = 2; /* maximum B-channel number */
|
||||
cs->logecho = 0; /* No echo logging */
|
||||
cs->cardnr = cardnr;
|
||||
cs->debug = L1_DEB_WARN;
|
||||
cs->HW_Flags = 0;
|
||||
cs->busy_flag = busy_flag;
|
||||
cs->irq_flags = I4L_IRQ_FLAG;
|
||||
#if TEI_PER_CARD
|
||||
if (card->protocol == ISDN_PTYPE_NI1)
|
||||
test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
|
||||
#else
|
||||
test_and_set_bit(FLG_TWO_DCHAN, &cs->HW_Flags);
|
||||
#endif
|
||||
cs->protocol = card->protocol;
|
||||
|
||||
if (card->typ <= 0 || card->typ > ISDN_CTYPE_COUNT) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: Card Type %d out of range\n", card->typ);
|
||||
goto outf_cs;
|
||||
}
|
||||
if (!ret) {
|
||||
ll_unload(cs);
|
||||
if (!(cs->dlog = kmalloc(MAX_DLOG_SPACE, GFP_ATOMIC))) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: No memory for dlog(card %d)\n", cardnr + 1);
|
||||
goto outf_cs;
|
||||
}
|
||||
if (!(cs->status_buf = kmalloc(HISAX_STATUS_BUFSIZE, GFP_ATOMIC))) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: No memory for status_buf(card %d)\n",
|
||||
cardnr + 1);
|
||||
goto outf_dlog;
|
||||
}
|
||||
cs->stlist = NULL;
|
||||
cs->status_read = cs->status_buf;
|
||||
cs->status_write = cs->status_buf;
|
||||
cs->status_end = cs->status_buf + HISAX_STATUS_BUFSIZE - 1;
|
||||
cs->typ = card->typ;
|
||||
#ifdef MODULE
|
||||
cs->iif.owner = lockowner;
|
||||
#endif
|
||||
strcpy(cs->iif.id, id);
|
||||
cs->iif.channels = 2;
|
||||
cs->iif.maxbufsize = MAX_DATA_SIZE;
|
||||
cs->iif.hl_hdrlen = MAX_HEADER_LEN;
|
||||
cs->iif.features =
|
||||
ISDN_FEATURE_L2_X75I |
|
||||
ISDN_FEATURE_L2_HDLC |
|
||||
ISDN_FEATURE_L2_HDLC_56K |
|
||||
ISDN_FEATURE_L2_TRANS |
|
||||
ISDN_FEATURE_L3_TRANS |
|
||||
#ifdef CONFIG_HISAX_1TR6
|
||||
ISDN_FEATURE_P_1TR6 |
|
||||
#endif
|
||||
#ifdef CONFIG_HISAX_EURO
|
||||
ISDN_FEATURE_P_EURO |
|
||||
#endif
|
||||
#ifdef CONFIG_HISAX_NI1
|
||||
ISDN_FEATURE_P_NI1 |
|
||||
#endif
|
||||
0;
|
||||
|
||||
cs->iif.command = HiSax_command;
|
||||
cs->iif.writecmd = NULL;
|
||||
cs->iif.writebuf_skb = HiSax_writebuf_skb;
|
||||
cs->iif.readstat = HiSax_readstatus;
|
||||
register_isdn(&cs->iif);
|
||||
cs->myid = cs->iif.channels;
|
||||
|
||||
*cs_out = cs;
|
||||
return 1; /* success */
|
||||
|
||||
outf_dlog:
|
||||
kfree(cs->dlog);
|
||||
outf_cs:
|
||||
kfree(cs);
|
||||
card->cs = NULL;
|
||||
out:
|
||||
return 0; /* error */
|
||||
}
|
||||
|
||||
static int hisax_cs_setup(int cardnr, struct IsdnCard *card,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (!(cs->rcvbuf = kmalloc(MAX_DFRAME_LEN_L1, GFP_ATOMIC))) {
|
||||
printk(KERN_WARNING "HiSax: No memory for isac rcvbuf\n");
|
||||
ll_unload(cs);
|
||||
|
@ -1143,11 +1160,41 @@ static int checkcard(int cardnr, char *id, int *busy_flag, struct module *lockow
|
|||
if (!test_bit(HW_ISAR, &cs->HW_Flags))
|
||||
ll_run(cs, 0);
|
||||
|
||||
ret = 1;
|
||||
return 1;
|
||||
|
||||
outf_cs:
|
||||
kfree(cs);
|
||||
card->cs = NULL;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int checkcard(int cardnr, char *id, int *busy_flag, struct module *lockowner)
|
||||
{
|
||||
int ret;
|
||||
struct IsdnCard *card = cards + cardnr;
|
||||
struct IsdnCardState *cs;
|
||||
|
||||
ret = hisax_cs_new(cardnr, id, card, &cs, busy_flag, lockowner);
|
||||
if (!ret)
|
||||
return 0;
|
||||
|
||||
printk(KERN_INFO
|
||||
"HiSax: Card %d Protocol %s Id=%s (%d)\n", cardnr + 1,
|
||||
(card->protocol == ISDN_PTYPE_1TR6) ? "1TR6" :
|
||||
(card->protocol == ISDN_PTYPE_EURO) ? "EDSS1" :
|
||||
(card->protocol == ISDN_PTYPE_LEASED) ? "LEASED" :
|
||||
(card->protocol == ISDN_PTYPE_NI1) ? "NI1" :
|
||||
"NONE", cs->iif.id, cs->myid);
|
||||
|
||||
ret = hisax_cs_setup_card(card);
|
||||
if (!ret) {
|
||||
ll_unload(cs);
|
||||
goto outf_cs;
|
||||
}
|
||||
|
||||
ret = hisax_cs_setup(cardnr, card, cs);
|
||||
goto out;
|
||||
|
||||
outf_dlog:
|
||||
kfree(cs->dlog);
|
||||
outf_cs:
|
||||
kfree(cs);
|
||||
card->cs = NULL;
|
||||
|
|
|
@ -300,31 +300,9 @@ enpci_interrupt(int intno, void *dev_id)
|
|||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
|
||||
static struct pci_dev *dev_netjet __devinitdata = NULL;
|
||||
|
||||
/* called by config.c */
|
||||
int __devinit
|
||||
setup_enternow_pci(struct IsdnCard *card)
|
||||
static int __devinit en_pci_probe(struct pci_dev *dev_netjet,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
int bytecnt;
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
#ifdef __BIG_ENDIAN
|
||||
#error "not running on big endian machines now"
|
||||
#endif
|
||||
strcpy(tmp, enternow_pci_rev);
|
||||
printk(KERN_INFO "HiSax: Formula-n Europe AG enter:now ISDN PCI driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ != ISDN_CTYPE_ENTERNOW)
|
||||
return(0);
|
||||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
|
||||
for ( ;; )
|
||||
{
|
||||
if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
|
||||
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
|
||||
if (pci_enable_device(dev_netjet))
|
||||
return(0);
|
||||
cs->irq = dev_netjet->irq;
|
||||
|
@ -344,11 +322,13 @@ setup_enternow_pci(struct IsdnCard *card)
|
|||
printk(KERN_WARNING "Use type=20 for Traverse NetJet PCI Card.\n");
|
||||
return(0);
|
||||
}
|
||||
} else {
|
||||
printk(KERN_WARNING "enter:now PCI: No PCI card found\n");
|
||||
return(0);
|
||||
}
|
||||
|
||||
return(1);
|
||||
}
|
||||
|
||||
static void __devinit en_cs_init(struct IsdnCard *card,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
|
||||
cs->hw.njet.isac = cs->hw.njet.base + 0xC0; // Fenster zum AMD
|
||||
|
||||
|
@ -368,30 +348,24 @@ setup_enternow_pci(struct IsdnCard *card)
|
|||
outb(~TJ_AMD_IRQ, cs->hw.njet.base + NETJET_AUXCTRL);
|
||||
outb(TJ_AMD_IRQ, cs->hw.njet.base + NETJET_IRQMASK1);
|
||||
outb(cs->hw.njet.auxd, cs->hw.njet.auxa);
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
#else
|
||||
|
||||
printk(KERN_WARNING "enter:now PCI: NO_PCI_BIOS\n");
|
||||
printk(KERN_WARNING "enter:now PCI: unable to config Formula-n enter:now ISDN PCI ab\n");
|
||||
return (0);
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
bytecnt = 256;
|
||||
static int __devinit en_cs_init_rest(struct IsdnCard *card,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
const int bytecnt = 256;
|
||||
|
||||
printk(KERN_INFO
|
||||
"enter:now PCI: PCI card configured at 0x%lx IRQ %d\n",
|
||||
cs->hw.njet.base, cs->irq);
|
||||
if (!request_region(cs->hw.njet.base, bytecnt, "Fn_ISDN")) {
|
||||
printk(KERN_WARNING
|
||||
"HiSax: %s config port %lx-%lx already in use\n",
|
||||
CardType[card->typ],
|
||||
"HiSax: enter:now config port %lx-%lx already in use\n",
|
||||
cs->hw.njet.base,
|
||||
cs->hw.njet.base + bytecnt);
|
||||
return (0);
|
||||
}
|
||||
|
||||
setup_Amd7930(cs);
|
||||
cs->hw.njet.last_is0 = 0;
|
||||
/* macro rByteAMD */
|
||||
|
@ -409,3 +383,42 @@ setup_enternow_pci(struct IsdnCard *card)
|
|||
|
||||
return (1);
|
||||
}
|
||||
|
||||
static struct pci_dev *dev_netjet __devinitdata = NULL;
|
||||
|
||||
/* called by config.c */
|
||||
int __devinit
|
||||
setup_enternow_pci(struct IsdnCard *card)
|
||||
{
|
||||
int ret;
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
|
||||
#ifdef __BIG_ENDIAN
|
||||
#error "not running on big endian machines now"
|
||||
#endif
|
||||
|
||||
strcpy(tmp, enternow_pci_rev);
|
||||
printk(KERN_INFO "HiSax: Formula-n Europe AG enter:now ISDN PCI driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ != ISDN_CTYPE_ENTERNOW)
|
||||
return(0);
|
||||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
|
||||
for ( ;; )
|
||||
{
|
||||
if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
|
||||
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
|
||||
ret = en_pci_probe(dev_netjet, cs);
|
||||
if (!ret)
|
||||
return(0);
|
||||
} else {
|
||||
printk(KERN_WARNING "enter:now PCI: No PCI card found\n");
|
||||
return(0);
|
||||
}
|
||||
|
||||
en_cs_init(card, cs);
|
||||
break;
|
||||
}
|
||||
|
||||
return en_cs_init_rest(card, cs);
|
||||
}
|
||||
|
|
|
@ -67,8 +67,6 @@ static const PCI_ENTRY id_list[] =
|
|||
};
|
||||
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
|
||||
/******************************************/
|
||||
/* free hardware resources used by driver */
|
||||
/******************************************/
|
||||
|
@ -511,7 +509,6 @@ main_rec_hfcpci(struct BCState *bcs)
|
|||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
if (count && receive)
|
||||
goto Begin;
|
||||
return;
|
||||
}
|
||||
|
||||
/**************************/
|
||||
|
@ -582,7 +579,6 @@ hfcpci_fill_dfifo(struct IsdnCardState *cs)
|
|||
|
||||
dev_kfree_skb_any(cs->tx_skb);
|
||||
cs->tx_skb = NULL;
|
||||
return;
|
||||
}
|
||||
|
||||
/**************************/
|
||||
|
@ -729,7 +725,6 @@ hfcpci_fill_fifo(struct BCState *bcs)
|
|||
dev_kfree_skb_any(bcs->tx_skb);
|
||||
bcs->tx_skb = NULL;
|
||||
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
|
||||
return;
|
||||
}
|
||||
|
||||
/**********************************************/
|
||||
|
@ -924,7 +919,6 @@ receive_emsg(struct IsdnCardState *cs)
|
|||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
if (count && receive)
|
||||
goto Begin;
|
||||
return;
|
||||
} /* receive_emsg */
|
||||
|
||||
/*********************/
|
||||
|
@ -1642,8 +1636,6 @@ hfcpci_card_msg(struct IsdnCardState *cs, int mt, void *arg)
|
|||
/* this variable is used as card index when more than one cards are present */
|
||||
static struct pci_dev *dev_hfcpci __devinitdata = NULL;
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
int __devinit
|
||||
setup_hfcpci(struct IsdnCard *card)
|
||||
{
|
||||
|
@ -1656,13 +1648,16 @@ setup_hfcpci(struct IsdnCard *card)
|
|||
#ifdef __BIG_ENDIAN
|
||||
#error "not running on big endian machines now"
|
||||
#endif
|
||||
|
||||
strcpy(tmp, hfcpci_revision);
|
||||
printk(KERN_INFO "HiSax: HFC-PCI driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
#ifdef CONFIG_PCI
|
||||
|
||||
cs->hw.hfcpci.int_s1 = 0;
|
||||
cs->dc.hfcpci.ph_state = 0;
|
||||
cs->hw.hfcpci.fifo = 255;
|
||||
if (cs->typ == ISDN_CTYPE_HFC_PCI) {
|
||||
if (cs->typ != ISDN_CTYPE_HFC_PCI)
|
||||
return(0);
|
||||
|
||||
i = 0;
|
||||
while (id_list[i].vendor_id) {
|
||||
tmp_hfcpci = pci_find_device(id_list[i].vendor_id,
|
||||
|
@ -1680,7 +1675,11 @@ setup_hfcpci(struct IsdnCard *card)
|
|||
}
|
||||
}
|
||||
|
||||
if (tmp_hfcpci) {
|
||||
if (!tmp_hfcpci) {
|
||||
printk(KERN_WARNING "HFC-PCI: No PCI card found\n");
|
||||
return (0);
|
||||
}
|
||||
|
||||
i--;
|
||||
dev_hfcpci = tmp_hfcpci; /* old device */
|
||||
cs->hw.hfcpci.dev = dev_hfcpci;
|
||||
|
@ -1691,10 +1690,7 @@ setup_hfcpci(struct IsdnCard *card)
|
|||
}
|
||||
cs->hw.hfcpci.pci_io = (char *)(unsigned long)dev_hfcpci->resource[1].start;
|
||||
printk(KERN_INFO "HiSax: HFC-PCI card manufacturer: %s card name: %s\n", id_list[i].vendor_name, id_list[i].card_name);
|
||||
} else {
|
||||
printk(KERN_WARNING "HFC-PCI: No PCI card found\n");
|
||||
return (0);
|
||||
}
|
||||
|
||||
if (!cs->hw.hfcpci.pci_io) {
|
||||
printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
|
||||
return (0);
|
||||
|
@ -1716,7 +1712,9 @@ setup_hfcpci(struct IsdnCard *card)
|
|||
cs->hw.hfcpci.fifos,
|
||||
(u_int) virt_to_bus(cs->hw.hfcpci.fifos),
|
||||
cs->irq, HZ);
|
||||
|
||||
spin_lock_irqsave(&cs->lock, flags);
|
||||
|
||||
pci_write_config_word(cs->hw.hfcpci.dev, PCI_COMMAND, PCI_ENA_MEMIO); /* enable memory mapped ports, disable busmaster */
|
||||
cs->hw.hfcpci.int_m2 = 0; /* disable alle interrupts */
|
||||
cs->hw.hfcpci.int_m1 = 0;
|
||||
|
@ -1724,6 +1722,7 @@ setup_hfcpci(struct IsdnCard *card)
|
|||
Write_hfc(cs, HFCPCI_INT_M2, cs->hw.hfcpci.int_m2);
|
||||
/* At this point the needed PCI config is done */
|
||||
/* fifos are still not enabled */
|
||||
|
||||
INIT_WORK(&cs->tqueue, hfcpci_bh);
|
||||
cs->setstack_d = setstack_hfcpci;
|
||||
cs->BC_Send_Data = &hfcpci_send_data;
|
||||
|
@ -1740,12 +1739,8 @@ setup_hfcpci(struct IsdnCard *card)
|
|||
init_timer(&cs->hw.hfcpci.timer);
|
||||
cs->cardmsg = &hfcpci_card_msg;
|
||||
cs->auxcmd = &hfcpci_auxcmd;
|
||||
|
||||
spin_unlock_irqrestore(&cs->lock, flags);
|
||||
|
||||
return (1);
|
||||
} else
|
||||
return (0); /* no valid card type */
|
||||
#else
|
||||
printk(KERN_WARNING "HFC-PCI: NO_PCI_BIOS\n");
|
||||
return (0);
|
||||
#endif /* CONFIG_PCI */
|
||||
}
|
||||
|
|
|
@ -148,30 +148,11 @@ NETjet_S_card_msg(struct IsdnCardState *cs, int mt, void *arg)
|
|||
return(0);
|
||||
}
|
||||
|
||||
static struct pci_dev *dev_netjet __devinitdata = NULL;
|
||||
|
||||
int __devinit
|
||||
setup_netjet_s(struct IsdnCard *card)
|
||||
static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
int bytecnt,cfg;
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
int cfg;
|
||||
|
||||
#ifdef __BIG_ENDIAN
|
||||
#error "not running on big endian machines now"
|
||||
#endif
|
||||
strcpy(tmp, NETjet_S_revision);
|
||||
printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ != ISDN_CTYPE_NETJET_S)
|
||||
return(0);
|
||||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
|
||||
for ( ;; )
|
||||
{
|
||||
if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
|
||||
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
|
||||
if (pci_enable_device(dev_netjet))
|
||||
return(0);
|
||||
pci_set_master(dev_netjet);
|
||||
|
@ -202,10 +183,13 @@ setup_netjet_s(struct IsdnCard *card)
|
|||
return(0);
|
||||
}
|
||||
/* end new code */
|
||||
} else {
|
||||
printk(KERN_WARNING "NETjet-S: No PCI card found\n");
|
||||
return(0);
|
||||
}
|
||||
|
||||
return(1);
|
||||
}
|
||||
|
||||
static int __devinit njs_cs_init(struct IsdnCard *card,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
|
||||
cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
|
||||
cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
|
||||
|
@ -228,27 +212,23 @@ setup_netjet_s(struct IsdnCard *card)
|
|||
switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
|
||||
{
|
||||
case 0 :
|
||||
break;
|
||||
return 1; /* end loop */
|
||||
|
||||
case 3 :
|
||||
printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
|
||||
continue;
|
||||
return -1; /* continue looping */
|
||||
|
||||
default :
|
||||
printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
|
||||
return 0;
|
||||
return 0; /* end loop & function */
|
||||
}
|
||||
break;
|
||||
}
|
||||
#else
|
||||
return 1; /* end loop */
|
||||
}
|
||||
|
||||
printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
|
||||
printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
|
||||
return (0);
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
bytecnt = 256;
|
||||
static int __devinit njs_cs_init_rest(struct IsdnCard *card,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
const int bytecnt = 256;
|
||||
|
||||
printk(KERN_INFO
|
||||
"NETjet-S: %s card configured at %#lx IRQ %d\n",
|
||||
|
@ -273,5 +253,47 @@ setup_netjet_s(struct IsdnCard *card)
|
|||
cs->irq_func = &netjet_s_interrupt;
|
||||
cs->irq_flags |= IRQF_SHARED;
|
||||
ISACVersion(cs, "NETjet-S:");
|
||||
|
||||
return (1);
|
||||
}
|
||||
|
||||
static struct pci_dev *dev_netjet __devinitdata = NULL;
|
||||
|
||||
int __devinit
|
||||
setup_netjet_s(struct IsdnCard *card)
|
||||
{
|
||||
int ret;
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
|
||||
#ifdef __BIG_ENDIAN
|
||||
#error "not running on big endian machines now"
|
||||
#endif
|
||||
strcpy(tmp, NETjet_S_revision);
|
||||
printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ != ISDN_CTYPE_NETJET_S)
|
||||
return(0);
|
||||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
|
||||
for ( ;; )
|
||||
{
|
||||
if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
|
||||
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
|
||||
ret = njs_pci_probe(dev_netjet, cs);
|
||||
if (!ret)
|
||||
return(0);
|
||||
} else {
|
||||
printk(KERN_WARNING "NETjet-S: No PCI card found\n");
|
||||
return(0);
|
||||
}
|
||||
|
||||
ret = njs_cs_init(card, cs);
|
||||
if (!ret)
|
||||
return(0);
|
||||
if (ret > 0)
|
||||
break;
|
||||
/* otherwise, ret < 0, continue looping */
|
||||
}
|
||||
|
||||
return njs_cs_init_rest(card, cs);
|
||||
}
|
||||
|
|
|
@ -128,31 +128,9 @@ NETjet_U_card_msg(struct IsdnCardState *cs, int mt, void *arg)
|
|||
return(0);
|
||||
}
|
||||
|
||||
static struct pci_dev *dev_netjet __devinitdata = NULL;
|
||||
|
||||
int __devinit
|
||||
setup_netjet_u(struct IsdnCard *card)
|
||||
static int __devinit nju_pci_probe(struct pci_dev *dev_netjet,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
int bytecnt;
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
#ifdef CONFIG_PCI
|
||||
#endif
|
||||
#ifdef __BIG_ENDIAN
|
||||
#error "not running on big endian machines now"
|
||||
#endif
|
||||
strcpy(tmp, NETjet_U_revision);
|
||||
printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ != ISDN_CTYPE_NETJET_U)
|
||||
return(0);
|
||||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
|
||||
for ( ;; )
|
||||
{
|
||||
if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
|
||||
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
|
||||
if (pci_enable_device(dev_netjet))
|
||||
return(0);
|
||||
pci_set_master(dev_netjet);
|
||||
|
@ -166,11 +144,13 @@ setup_netjet_u(struct IsdnCard *card)
|
|||
printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n");
|
||||
return(0);
|
||||
}
|
||||
} else {
|
||||
printk(KERN_WARNING "NETspider-U: No PCI card found\n");
|
||||
return(0);
|
||||
}
|
||||
|
||||
return (1);
|
||||
}
|
||||
|
||||
static int __devinit nju_cs_init(struct IsdnCard *card,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
|
||||
cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
|
||||
mdelay(10);
|
||||
|
@ -194,27 +174,23 @@ setup_netjet_u(struct IsdnCard *card)
|
|||
switch ( ( ( NETjet_ReadIC( cs, ICC_RBCH ) >> 5 ) & 3 ) )
|
||||
{
|
||||
case 3 :
|
||||
break;
|
||||
return 1; /* end loop */
|
||||
|
||||
case 0 :
|
||||
printk( KERN_WARNING "NETspider-U: NETjet-S PCI card found\n" );
|
||||
continue;
|
||||
return -1; /* continue looping */
|
||||
|
||||
default :
|
||||
printk( KERN_WARNING "NETspider-U: No PCI card found\n" );
|
||||
return 0;
|
||||
return 0; /* end loop & function */
|
||||
}
|
||||
break;
|
||||
}
|
||||
#else
|
||||
return 1; /* end loop */
|
||||
}
|
||||
|
||||
printk(KERN_WARNING "NETspider-U: NO_PCI_BIOS\n");
|
||||
printk(KERN_WARNING "NETspider-U: unable to config NETspider-U PCI\n");
|
||||
return (0);
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
bytecnt = 256;
|
||||
static int __devinit nju_cs_init_rest(struct IsdnCard *card,
|
||||
struct IsdnCardState *cs)
|
||||
{
|
||||
const int bytecnt = 256;
|
||||
|
||||
printk(KERN_INFO
|
||||
"NETspider-U: PCI card configured at %#lx IRQ %d\n",
|
||||
|
@ -239,5 +215,48 @@ setup_netjet_u(struct IsdnCard *card)
|
|||
cs->irq_func = &netjet_u_interrupt;
|
||||
cs->irq_flags |= IRQF_SHARED;
|
||||
ICCVersion(cs, "NETspider-U:");
|
||||
|
||||
return (1);
|
||||
}
|
||||
|
||||
static struct pci_dev *dev_netjet __devinitdata = NULL;
|
||||
|
||||
int __devinit
|
||||
setup_netjet_u(struct IsdnCard *card)
|
||||
{
|
||||
int ret;
|
||||
struct IsdnCardState *cs = card->cs;
|
||||
char tmp[64];
|
||||
|
||||
#ifdef __BIG_ENDIAN
|
||||
#error "not running on big endian machines now"
|
||||
#endif
|
||||
|
||||
strcpy(tmp, NETjet_U_revision);
|
||||
printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp));
|
||||
if (cs->typ != ISDN_CTYPE_NETJET_U)
|
||||
return(0);
|
||||
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
|
||||
|
||||
for ( ;; )
|
||||
{
|
||||
if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
|
||||
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
|
||||
ret = nju_pci_probe(dev_netjet, cs);
|
||||
if (!ret)
|
||||
return(0);
|
||||
} else {
|
||||
printk(KERN_WARNING "NETspider-U: No PCI card found\n");
|
||||
return(0);
|
||||
}
|
||||
|
||||
ret = nju_cs_init(card, cs);
|
||||
if (!ret)
|
||||
return (0);
|
||||
if (ret > 0)
|
||||
break;
|
||||
/* ret < 0 == continue looping */
|
||||
}
|
||||
|
||||
return nju_cs_init_rest(card, cs);
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue