diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index fb81179dce37..788da6cf7074 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -2,8 +2,9 @@ TI SOC ECAP based APWM controller
 
 Required properties:
 - compatible: Must be "ti,<soc>-ecap".
-  for am33xx - compatible = "ti,am33xx-ecap";
-  for da850  - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+  for am33xx  - compatible = "ti,am33xx-ecap";
+  for am4372  - compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
+  for da850   - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The PWM channel index ranges from 0 to 4. The only third
   cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -22,6 +23,13 @@ ecap0: ecap@0 { /* ECAP on am33xx */
 	ti,hwmods = "ecap0";
 };
 
+ecap0: ecap@0 { /* ECAP on am4372 */
+	compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
+	#pwm-cells = <3>;
+	reg = <0x48300100 0x80>;
+	ti,hwmods = "ecap0";
+};
+
 ecap0: ecap@0 { /* ECAP on da850 */
 	compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 9c100b2c5b23..99b544f75f96 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -2,8 +2,9 @@ TI SOC EHRPWM based PWM controller
 
 Required properties:
 - compatible: Must be "ti,<soc>-ehrpwm".
-  for am33xx - compatible = "ti,am33xx-ehrpwm";
-  for da850  - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+  for am33xx  - compatible = "ti,am33xx-ehrpwm";
+  for am4372  - compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
+  for da850   - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The only third cell flag supported by this binding is
   PWM_POLARITY_INVERTED.
@@ -22,6 +23,13 @@ ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
 	ti,hwmods = "ehrpwm0";
 };
 
+ehrpwm0: ehrpwm@0 { /* EHRPWM on am4372 */
+	compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
+	#pwm-cells = <3>;
+	reg = <0x48300200 0x80>;
+	ti,hwmods = "ehrpwm0";
+};
+
 ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
 	compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index f7eae77f8354..fd8e87c16a44 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -1,7 +1,10 @@
 TI SOC based PWM Subsystem
 
 Required properties:
-- compatible: Must be "ti,am33xx-pwmss";
+- compatible: Must be "ti,<soc>-pwmss".
+  for am33xx  - compatible = "ti,am33xx-pwmss";
+  for am4372  - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+
 - reg: physical base address and size of the registers map.
 - address-cells: Specify the number of u32 entries needed in child nodes.
 		  Should set to 1.
@@ -16,7 +19,7 @@ Required properties:
 Also child nodes should also populated under PWMSS DT node.
 
 Example:
-pwmss0: pwmss@48300000 {
+epwmss0: epwmss@48300000 { /* PWMSS for am33xx */
 	compatible = "ti,am33xx-pwmss";
 	reg = <0x48300000 0x10>;
 	ti,hwmods = "epwmss0";
@@ -29,3 +32,17 @@ pwmss0: pwmss@48300000 {
 
 	/* child nodes go here */
 };
+
+epwmss0: epwmss@48300000 { /* PWMSS for am4372 */
+	compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"
+	reg = <0x48300000 0x10>;
+	ti,hwmods = "epwmss0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "disabled";
+	ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+		  0x48300180 0x48300180 0x80   /* EQEP */
+		  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+	/* child nodes go here */
+};