From 96f3fb86d70fe64ba88a7f567bafe9c504b87d25 Mon Sep 17 00:00:00 2001 From: "Andrei.Stefanescu@microchip.com" Date: Wed, 12 Dec 2018 18:31:08 +0000 Subject: [PATCH] regulator: dt-bindings: add MCP16502 regulator bindings This patch describes the compatible and the device tree bindings necessary for the MCP16502 PMIC. Signed-off-by: Andrei Stefanescu Reviewed-by: Rob Herring Signed-off-by: Mark Brown --- .../bindings/regulator/mcp16502-regulator.txt | 143 ++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt new file mode 100644 index 000000000000..b8f843fa6092 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -0,0 +1,143 @@ +MCP16502 PMIC + +Required properties: +- compatible: "microchip,mcp16502" +- reg: I2C slave address +- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode. +- regulators: A node that houses a sub-node for each regulator within + the device. Each sub-node is identified using the node's + name. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Regualtors of MCP16502 PMIC: +1) VDD_IO - Buck (1.2 - 3.7 V) +2) VDD_DDR - Buck (0.6 - 1.85 V) +3) VDD_CORE - Buck (0.6 - 1.85 V) +4) VDD_OTHER - BUCK (0.6 - 1.85 V) +5) LDO1 - LDO (1.2 - 3.7 V) +6) LDO2 - LDO (1.2 - 3.7 V) + +Regulator modes: +2 - FPWM: higher precision, higher consumption +4 - AutoPFM: lower precision, lower consumption + +Each regulator is defined using the standard binding for regulators. + +Example: + +mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; +};