diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 92b01170d8f3..e42a465f5717 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -206,6 +206,15 @@ config BLK_DEV_IDECD To compile this driver as a module, choose M here: the module will be called ide-cd. +config BLK_DEV_IDECD_VERBOSE_ERRORS + bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED + depends on BLK_DEV_IDECD + default y + help + Turn this on to have the driver print out the meanings of the + ATAPI error codes. This will use up additional 8kB of kernel-space + memory, though. + config BLK_DEV_IDETAPE tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 0d2da89d15cf..5ce1d8f17c06 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -40,8 +40,10 @@ obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o +ide-cd_mod-y += ide-cd.o ide-cd_verbose.o + obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o -obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o +obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 02488b48fa7a..f4a0264bea6d 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -199,129 +199,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, } } } -#if VERBOSE_IDE_CD_ERRORS - { - int i; - const char *s = "bad sense key!"; - char buf[80]; - printk(KERN_ERR "ATAPI device %s:\n", drive->name); - if (sense->error_code == 0x70) - printk(KERN_CONT " Error: "); - else if (sense->error_code == 0x71) - printk(" Deferred Error: "); - else if (sense->error_code == 0x7f) - printk(KERN_CONT " Vendor-specific Error: "); - else - printk(KERN_CONT " Unknown Error Type: "); - - if (sense->sense_key < ARRAY_SIZE(sense_key_texts)) - s = sense_key_texts[sense->sense_key]; - - printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", - s, sense->sense_key); - - if (sense->asc == 0x40) { - sprintf(buf, "Diagnostic failure on component 0x%02x", - sense->ascq); - s = buf; - } else { - int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts); - unsigned long key = (sense->sense_key << 16); - - key |= (sense->asc << 8); - if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd)) - key |= sense->ascq; - s = NULL; - - while (hi > lo) { - mid = (lo + hi) / 2; - if (sense_data_texts[mid].asc_ascq == key || - sense_data_texts[mid].asc_ascq == (0xff0000|key)) { - s = sense_data_texts[mid].text; - break; - } else if (sense_data_texts[mid].asc_ascq > key) - hi = mid; - else - lo = mid + 1; - } - } - - if (s == NULL) { - if (sense->asc > 0x80) - s = "(vendor-specific error)"; - else - s = "(reserved error code)"; - } - - printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n", - s, sense->asc, sense->ascq); - - if (failed_command != NULL) { - int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts); - s = NULL; - - while (hi > lo) { - mid = (lo + hi) / 2; - if (packet_command_texts[mid].packet_command == - failed_command->cmd[0]) { - s = packet_command_texts[mid].text; - break; - } - if (packet_command_texts[mid].packet_command > - failed_command->cmd[0]) - hi = mid; - else - lo = mid + 1; - } - - printk(KERN_ERR " The failed \"%s\" packet command " - "was: \n \"", s); - for (i = 0; i < sizeof(failed_command->cmd); i++) - printk(KERN_CONT "%02x ", - failed_command->cmd[i]); - printk(KERN_CONT "\"\n"); - } - - /* The SKSV bit specifies validity of the sense_key_specific - * in the next two commands. It is bit 7 of the first byte. - * In the case of NOT_READY, if SKSV is set the drive can - * give us nice ETA readings. - */ - if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) { - int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100; - - printk(KERN_ERR " Command is %02d%% complete\n", - progress / 0xffff); - } - - if (sense->sense_key == ILLEGAL_REQUEST && - (sense->sks[0] & 0x80) != 0) { - printk(KERN_ERR " Error in %s byte %d", - (sense->sks[0] & 0x40) != 0 ? - "command packet" : "command data", - (sense->sks[1] << 8) + sense->sks[2]); - - if ((sense->sks[0] & 0x40) != 0) - printk(KERN_CONT " bit %d", - sense->sks[0] & 0x07); - - printk(KERN_CONT "\n"); - } - } -#else /* not VERBOSE_IDE_CD_ERRORS */ - /* Suppress printing unit attention and `in progress of becoming ready' - errors when we're not being verbose. */ - if (sense->sense_key == UNIT_ATTENTION || - (sense->sense_key == NOT_READY && (sense->asc == 4 || - sense->asc == 0x3a))) - return; - - printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x " - "asc: 0x%02x ascq: 0x%02x\n", - drive->name, sense->error_code, sense->sense_key, - sense->asc, sense->ascq); -#endif /* not VERBOSE_IDE_CD_ERRORS */ + ide_cd_log_error(drive->name, failed_command, sense); } /* @@ -3189,6 +3068,7 @@ static int __init ide_cdrom_init(void) } MODULE_ALIAS("ide:*m-cdrom*"); +MODULE_ALIAS("ide-cd"); module_init(ide_cdrom_init); module_exit(ide_cdrom_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 3a43178ab121..e1b401494a99 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -10,14 +10,6 @@ #include #include -/* Turn this on to have the driver print out the meanings of the - ATAPI error codes. This will use up additional kernel-space - memory, though. */ - -#ifndef VERBOSE_IDE_CD_ERRORS -#define VERBOSE_IDE_CD_ERRORS 1 -#endif - /* * typical timeout for packet command */ @@ -153,232 +145,7 @@ struct cdrom_info { unsigned long write_timeout; }; -/**************************************************************************** - * Descriptions of ATAPI error codes. - */ - -/* This stuff should be in cdrom.h, since it is now generic... */ -#if VERBOSE_IDE_CD_ERRORS -/* The generic packet command opcodes for CD/DVD Logical Units, - * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -static const struct { - unsigned short packet_command; - const char * const text; -} packet_command_texts[] = { - { GPCMD_TEST_UNIT_READY, "Test Unit Ready" }, - { GPCMD_REQUEST_SENSE, "Request Sense" }, - { GPCMD_FORMAT_UNIT, "Format Unit" }, - { GPCMD_INQUIRY, "Inquiry" }, - { GPCMD_START_STOP_UNIT, "Start/Stop Unit" }, - { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" }, - { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" }, - { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" }, - { GPCMD_READ_10, "Read 10" }, - { GPCMD_WRITE_10, "Write 10" }, - { GPCMD_SEEK, "Seek" }, - { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" }, - { GPCMD_VERIFY_10, "Verify 10" }, - { GPCMD_FLUSH_CACHE, "Flush Cache" }, - { GPCMD_READ_SUBCHANNEL, "Read Subchannel" }, - { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" }, - { GPCMD_READ_HEADER, "Read Header" }, - { GPCMD_PLAY_AUDIO_10, "Play Audio 10" }, - { GPCMD_GET_CONFIGURATION, "Get Configuration" }, - { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" }, - { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" }, - { GPCMD_GET_EVENT_STATUS_NOTIFICATION, - "Get Event Status Notification" }, - { GPCMD_PAUSE_RESUME, "Pause/Resume" }, - { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" }, - { GPCMD_READ_DISC_INFO, "Read Disc Info" }, - { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" }, - { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" }, - { GPCMD_SEND_OPC, "Send OPC" }, - { GPCMD_MODE_SELECT_10, "Mode Select 10" }, - { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" }, - { GPCMD_MODE_SENSE_10, "Mode Sense 10" }, - { GPCMD_CLOSE_TRACK, "Close Track" }, - { GPCMD_BLANK, "Blank" }, - { GPCMD_SEND_EVENT, "Send Event" }, - { GPCMD_SEND_KEY, "Send Key" }, - { GPCMD_REPORT_KEY, "Report Key" }, - { GPCMD_LOAD_UNLOAD, "Load/Unload" }, - { GPCMD_SET_READ_AHEAD, "Set Read-ahead" }, - { GPCMD_READ_12, "Read 12" }, - { GPCMD_GET_PERFORMANCE, "Get Performance" }, - { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" }, - { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" }, - { GPCMD_SET_STREAMING, "Set Streaming" }, - { GPCMD_READ_CD_MSF, "Read CD MSF" }, - { GPCMD_SCAN, "Scan" }, - { GPCMD_SET_SPEED, "Set Speed" }, - { GPCMD_PLAY_CD, "Play CD" }, - { GPCMD_MECHANISM_STATUS, "Mechanism Status" }, - { GPCMD_READ_CD, "Read CD" }, -}; - -/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -static const char * const sense_key_texts[16] = { - "No sense data", - "Recovered error", - "Not ready", - "Medium error", - "Hardware error", - "Illegal request", - "Unit attention", - "Data protect", - "Blank check", - "(reserved)", - "(reserved)", - "Aborted command", - "(reserved)", - "(reserved)", - "Miscompare", - "(reserved)", -}; - -/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -static const struct { - unsigned long asc_ascq; - const char * const text; -} sense_data_texts[] = { - { 0x000000, "No additional sense information" }, - { 0x000011, "Play operation in progress" }, - { 0x000012, "Play operation paused" }, - { 0x000013, "Play operation successfully completed" }, - { 0x000014, "Play operation stopped due to error" }, - { 0x000015, "No current audio status to return" }, - { 0x010c0a, "Write error - padding blocks added" }, - { 0x011700, "Recovered data with no error correction applied" }, - { 0x011701, "Recovered data with retries" }, - { 0x011702, "Recovered data with positive head offset" }, - { 0x011703, "Recovered data with negative head offset" }, - { 0x011704, "Recovered data with retries and/or CIRC applied" }, - { 0x011705, "Recovered data using previous sector ID" }, - { 0x011800, "Recovered data with error correction applied" }, - { 0x011801, "Recovered data with error correction and retries applied"}, - { 0x011802, "Recovered data - the data was auto-reallocated" }, - { 0x011803, "Recovered data with CIRC" }, - { 0x011804, "Recovered data with L-EC" }, - { 0x015d00, "Failure prediction threshold exceeded" - " - Predicted logical unit failure" }, - { 0x015d01, "Failure prediction threshold exceeded" - " - Predicted media failure" }, - { 0x015dff, "Failure prediction threshold exceeded - False" }, - { 0x017301, "Power calibration area almost full" }, - { 0x020400, "Logical unit not ready - cause not reportable" }, - /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */ - { 0x020401, "Logical unit not ready" - " - in progress [sic] of becoming ready" }, - { 0x020402, "Logical unit not ready - initializing command required" }, - { 0x020403, "Logical unit not ready - manual intervention required" }, - { 0x020404, "Logical unit not ready - format in progress" }, - { 0x020407, "Logical unit not ready - operation in progress" }, - { 0x020408, "Logical unit not ready - long write in progress" }, - { 0x020600, "No reference position found (media may be upside down)" }, - { 0x023000, "Incompatible medium installed" }, - { 0x023a00, "Medium not present" }, - { 0x025300, "Media load or eject failed" }, - { 0x025700, "Unable to recover table of contents" }, - { 0x030300, "Peripheral device write fault" }, - { 0x030301, "No write current" }, - { 0x030302, "Excessive write errors" }, - { 0x030c00, "Write error" }, - { 0x030c01, "Write error - Recovered with auto reallocation" }, - { 0x030c02, "Write error - auto reallocation failed" }, - { 0x030c03, "Write error - recommend reassignment" }, - { 0x030c04, "Compression check miscompare error" }, - { 0x030c05, "Data expansion occurred during compress" }, - { 0x030c06, "Block not compressible" }, - { 0x030c07, "Write error - recovery needed" }, - { 0x030c08, "Write error - recovery failed" }, - { 0x030c09, "Write error - loss of streaming" }, - { 0x031100, "Unrecovered read error" }, - { 0x031106, "CIRC unrecovered error" }, - { 0x033101, "Format command failed" }, - { 0x033200, "No defect spare location available" }, - { 0x033201, "Defect list update failure" }, - { 0x035100, "Erase failure" }, - { 0x037200, "Session fixation error" }, - { 0x037201, "Session fixation error writin lead-in" }, - { 0x037202, "Session fixation error writin lead-out" }, - { 0x037300, "CD control error" }, - { 0x037302, "Power calibration area is full" }, - { 0x037303, "Power calibration area error" }, - { 0x037304, "Program memory area / RMA update failure" }, - { 0x037305, "Program memory area / RMA is full" }, - { 0x037306, "Program memory area / RMA is (almost) full" }, - { 0x040200, "No seek complete" }, - { 0x040300, "Write fault" }, - { 0x040900, "Track following error" }, - { 0x040901, "Tracking servo failure" }, - { 0x040902, "Focus servo failure" }, - { 0x040903, "Spindle servo failure" }, - { 0x041500, "Random positioning error" }, - { 0x041501, "Mechanical positioning or changer error" }, - { 0x041502, "Positioning error detected by read of medium" }, - { 0x043c00, "Mechanical positioning or changer error" }, - { 0x044000, "Diagnostic failure on component (ASCQ)" }, - { 0x044400, "Internal CD/DVD logical unit failure" }, - { 0x04b600, "Media load mechanism failed" }, - { 0x051a00, "Parameter list length error" }, - { 0x052000, "Invalid command operation code" }, - { 0x052100, "Logical block address out of range" }, - { 0x052102, "Invalid address for write" }, - { 0x052400, "Invalid field in command packet" }, - { 0x052600, "Invalid field in parameter list" }, - { 0x052601, "Parameter not supported" }, - { 0x052602, "Parameter value invalid" }, - { 0x052700, "Write protected media" }, - { 0x052c00, "Command sequence error" }, - { 0x052c03, "Current program area is not empty" }, - { 0x052c04, "Current program area is empty" }, - { 0x053001, "Cannot read medium - unknown format" }, - { 0x053002, "Cannot read medium - incompatible format" }, - { 0x053900, "Saving parameters not supported" }, - { 0x054e00, "Overlapped commands attempted" }, - { 0x055302, "Medium removal prevented" }, - { 0x055500, "System resource failure" }, - { 0x056300, "End of user area encountered on this track" }, - { 0x056400, "Illegal mode for this track or incompatible medium" }, - { 0x056f00, "Copy protection key exchange failure" - " - Authentication failure" }, - { 0x056f01, "Copy protection key exchange failure - Key not present" }, - { 0x056f02, "Copy protection key exchange failure" - " - Key not established" }, - { 0x056f03, "Read of scrambled sector without authentication" }, - { 0x056f04, "Media region code is mismatched to logical unit" }, - { 0x056f05, "Drive region must be permanent" - " / region reset count error" }, - { 0x057203, "Session fixation error - incomplete track in session" }, - { 0x057204, "Empty or partially written reserved track" }, - { 0x057205, "No more RZONE reservations are allowed" }, - { 0x05bf00, "Loss of streaming" }, - { 0x062800, "Not ready to ready transition, medium may have changed" }, - { 0x062900, "Power on, reset or hardware reset occurred" }, - { 0x062a00, "Parameters changed" }, - { 0x062a01, "Mode parameters changed" }, - { 0x062e00, "Insufficient time for operation" }, - { 0x063f00, "Logical unit operating conditions have changed" }, - { 0x063f01, "Microcode has been changed" }, - { 0x065a00, "Operator request or state change input (unspecified)" }, - { 0x065a01, "Operator medium removal request" }, - { 0x0bb900, "Play operation aborted" }, - /* Here we use 0xff for the key (not a valid key) to signify - * that these can have _any_ key value associated with them... */ - { 0xff0401, "Logical unit is in process of becoming ready" }, - { 0xff0400, "Logical unit not ready, cause not reportable" }, - { 0xff0402, "Logical unit not ready, initializing command required" }, - { 0xff0403, "Logical unit not ready, manual intervention required" }, - { 0xff0500, "Logical unit does not respond to selection" }, - { 0xff0800, "Logical unit communication failure" }, - { 0xff0802, "Logical unit communication parity error" }, - { 0xff0801, "Logical unit communication time-out" }, - { 0xff2500, "Logical unit not supported" }, - { 0xff4c00, "Logical unit failed self-configuration" }, - { 0xff3e00, "Logical unit has not self-configured yet" }, -}; -#endif - +/* ide-cd_verbose.c */ +void ide_cd_log_error(const char *, struct request *, struct request_sense *); #endif /* _IDE_CD_H */ diff --git a/drivers/ide/ide-cd_verbose.c b/drivers/ide/ide-cd_verbose.c new file mode 100644 index 000000000000..6ed7ca071331 --- /dev/null +++ b/drivers/ide/ide-cd_verbose.c @@ -0,0 +1,359 @@ +/* + * Verbose error logging for ATAPI CD/DVD devices. + * + * Copyright (C) 1994-1996 Scott Snyder + * Copyright (C) 1996-1998 Erik Andersen + * Copyright (C) 1998-2000 Jens Axboe + */ + +#include +#include +#include +#include + +#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS +void ide_cd_log_error(const char *name, struct request *failed_command, + struct request_sense *sense) +{ + /* Suppress printing unit attention and `in progress of becoming ready' + errors when we're not being verbose. */ + if (sense->sense_key == UNIT_ATTENTION || + (sense->sense_key == NOT_READY && (sense->asc == 4 || + sense->asc == 0x3a))) + return; + + printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x " + "asc: 0x%02x ascq: 0x%02x\n", + name, sense->error_code, sense->sense_key, + sense->asc, sense->ascq); +} +#else +/* The generic packet command opcodes for CD/DVD Logical Units, + * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ +static const struct { + unsigned short packet_command; + const char * const text; +} packet_command_texts[] = { + { GPCMD_TEST_UNIT_READY, "Test Unit Ready" }, + { GPCMD_REQUEST_SENSE, "Request Sense" }, + { GPCMD_FORMAT_UNIT, "Format Unit" }, + { GPCMD_INQUIRY, "Inquiry" }, + { GPCMD_START_STOP_UNIT, "Start/Stop Unit" }, + { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" }, + { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" }, + { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" }, + { GPCMD_READ_10, "Read 10" }, + { GPCMD_WRITE_10, "Write 10" }, + { GPCMD_SEEK, "Seek" }, + { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" }, + { GPCMD_VERIFY_10, "Verify 10" }, + { GPCMD_FLUSH_CACHE, "Flush Cache" }, + { GPCMD_READ_SUBCHANNEL, "Read Subchannel" }, + { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" }, + { GPCMD_READ_HEADER, "Read Header" }, + { GPCMD_PLAY_AUDIO_10, "Play Audio 10" }, + { GPCMD_GET_CONFIGURATION, "Get Configuration" }, + { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" }, + { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" }, + { GPCMD_GET_EVENT_STATUS_NOTIFICATION, + "Get Event Status Notification" }, + { GPCMD_PAUSE_RESUME, "Pause/Resume" }, + { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" }, + { GPCMD_READ_DISC_INFO, "Read Disc Info" }, + { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" }, + { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" }, + { GPCMD_SEND_OPC, "Send OPC" }, + { GPCMD_MODE_SELECT_10, "Mode Select 10" }, + { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" }, + { GPCMD_MODE_SENSE_10, "Mode Sense 10" }, + { GPCMD_CLOSE_TRACK, "Close Track" }, + { GPCMD_BLANK, "Blank" }, + { GPCMD_SEND_EVENT, "Send Event" }, + { GPCMD_SEND_KEY, "Send Key" }, + { GPCMD_REPORT_KEY, "Report Key" }, + { GPCMD_LOAD_UNLOAD, "Load/Unload" }, + { GPCMD_SET_READ_AHEAD, "Set Read-ahead" }, + { GPCMD_READ_12, "Read 12" }, + { GPCMD_GET_PERFORMANCE, "Get Performance" }, + { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" }, + { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" }, + { GPCMD_SET_STREAMING, "Set Streaming" }, + { GPCMD_READ_CD_MSF, "Read CD MSF" }, + { GPCMD_SCAN, "Scan" }, + { GPCMD_SET_SPEED, "Set Speed" }, + { GPCMD_PLAY_CD, "Play CD" }, + { GPCMD_MECHANISM_STATUS, "Mechanism Status" }, + { GPCMD_READ_CD, "Read CD" }, +}; + +/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ +static const char * const sense_key_texts[16] = { + "No sense data", + "Recovered error", + "Not ready", + "Medium error", + "Hardware error", + "Illegal request", + "Unit attention", + "Data protect", + "Blank check", + "(reserved)", + "(reserved)", + "Aborted command", + "(reserved)", + "(reserved)", + "Miscompare", + "(reserved)", +}; + +/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ +static const struct { + unsigned long asc_ascq; + const char * const text; +} sense_data_texts[] = { + { 0x000000, "No additional sense information" }, + { 0x000011, "Play operation in progress" }, + { 0x000012, "Play operation paused" }, + { 0x000013, "Play operation successfully completed" }, + { 0x000014, "Play operation stopped due to error" }, + { 0x000015, "No current audio status to return" }, + { 0x010c0a, "Write error - padding blocks added" }, + { 0x011700, "Recovered data with no error correction applied" }, + { 0x011701, "Recovered data with retries" }, + { 0x011702, "Recovered data with positive head offset" }, + { 0x011703, "Recovered data with negative head offset" }, + { 0x011704, "Recovered data with retries and/or CIRC applied" }, + { 0x011705, "Recovered data using previous sector ID" }, + { 0x011800, "Recovered data with error correction applied" }, + { 0x011801, "Recovered data with error correction and retries applied"}, + { 0x011802, "Recovered data - the data was auto-reallocated" }, + { 0x011803, "Recovered data with CIRC" }, + { 0x011804, "Recovered data with L-EC" }, + { 0x015d00, "Failure prediction threshold exceeded" + " - Predicted logical unit failure" }, + { 0x015d01, "Failure prediction threshold exceeded" + " - Predicted media failure" }, + { 0x015dff, "Failure prediction threshold exceeded - False" }, + { 0x017301, "Power calibration area almost full" }, + { 0x020400, "Logical unit not ready - cause not reportable" }, + /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */ + { 0x020401, "Logical unit not ready" + " - in progress [sic] of becoming ready" }, + { 0x020402, "Logical unit not ready - initializing command required" }, + { 0x020403, "Logical unit not ready - manual intervention required" }, + { 0x020404, "Logical unit not ready - format in progress" }, + { 0x020407, "Logical unit not ready - operation in progress" }, + { 0x020408, "Logical unit not ready - long write in progress" }, + { 0x020600, "No reference position found (media may be upside down)" }, + { 0x023000, "Incompatible medium installed" }, + { 0x023a00, "Medium not present" }, + { 0x025300, "Media load or eject failed" }, + { 0x025700, "Unable to recover table of contents" }, + { 0x030300, "Peripheral device write fault" }, + { 0x030301, "No write current" }, + { 0x030302, "Excessive write errors" }, + { 0x030c00, "Write error" }, + { 0x030c01, "Write error - Recovered with auto reallocation" }, + { 0x030c02, "Write error - auto reallocation failed" }, + { 0x030c03, "Write error - recommend reassignment" }, + { 0x030c04, "Compression check miscompare error" }, + { 0x030c05, "Data expansion occurred during compress" }, + { 0x030c06, "Block not compressible" }, + { 0x030c07, "Write error - recovery needed" }, + { 0x030c08, "Write error - recovery failed" }, + { 0x030c09, "Write error - loss of streaming" }, + { 0x031100, "Unrecovered read error" }, + { 0x031106, "CIRC unrecovered error" }, + { 0x033101, "Format command failed" }, + { 0x033200, "No defect spare location available" }, + { 0x033201, "Defect list update failure" }, + { 0x035100, "Erase failure" }, + { 0x037200, "Session fixation error" }, + { 0x037201, "Session fixation error writin lead-in" }, + { 0x037202, "Session fixation error writin lead-out" }, + { 0x037300, "CD control error" }, + { 0x037302, "Power calibration area is full" }, + { 0x037303, "Power calibration area error" }, + { 0x037304, "Program memory area / RMA update failure" }, + { 0x037305, "Program memory area / RMA is full" }, + { 0x037306, "Program memory area / RMA is (almost) full" }, + { 0x040200, "No seek complete" }, + { 0x040300, "Write fault" }, + { 0x040900, "Track following error" }, + { 0x040901, "Tracking servo failure" }, + { 0x040902, "Focus servo failure" }, + { 0x040903, "Spindle servo failure" }, + { 0x041500, "Random positioning error" }, + { 0x041501, "Mechanical positioning or changer error" }, + { 0x041502, "Positioning error detected by read of medium" }, + { 0x043c00, "Mechanical positioning or changer error" }, + { 0x044000, "Diagnostic failure on component (ASCQ)" }, + { 0x044400, "Internal CD/DVD logical unit failure" }, + { 0x04b600, "Media load mechanism failed" }, + { 0x051a00, "Parameter list length error" }, + { 0x052000, "Invalid command operation code" }, + { 0x052100, "Logical block address out of range" }, + { 0x052102, "Invalid address for write" }, + { 0x052400, "Invalid field in command packet" }, + { 0x052600, "Invalid field in parameter list" }, + { 0x052601, "Parameter not supported" }, + { 0x052602, "Parameter value invalid" }, + { 0x052700, "Write protected media" }, + { 0x052c00, "Command sequence error" }, + { 0x052c03, "Current program area is not empty" }, + { 0x052c04, "Current program area is empty" }, + { 0x053001, "Cannot read medium - unknown format" }, + { 0x053002, "Cannot read medium - incompatible format" }, + { 0x053900, "Saving parameters not supported" }, + { 0x054e00, "Overlapped commands attempted" }, + { 0x055302, "Medium removal prevented" }, + { 0x055500, "System resource failure" }, + { 0x056300, "End of user area encountered on this track" }, + { 0x056400, "Illegal mode for this track or incompatible medium" }, + { 0x056f00, "Copy protection key exchange failure" + " - Authentication failure" }, + { 0x056f01, "Copy protection key exchange failure - Key not present" }, + { 0x056f02, "Copy protection key exchange failure" + " - Key not established" }, + { 0x056f03, "Read of scrambled sector without authentication" }, + { 0x056f04, "Media region code is mismatched to logical unit" }, + { 0x056f05, "Drive region must be permanent" + " / region reset count error" }, + { 0x057203, "Session fixation error - incomplete track in session" }, + { 0x057204, "Empty or partially written reserved track" }, + { 0x057205, "No more RZONE reservations are allowed" }, + { 0x05bf00, "Loss of streaming" }, + { 0x062800, "Not ready to ready transition, medium may have changed" }, + { 0x062900, "Power on, reset or hardware reset occurred" }, + { 0x062a00, "Parameters changed" }, + { 0x062a01, "Mode parameters changed" }, + { 0x062e00, "Insufficient time for operation" }, + { 0x063f00, "Logical unit operating conditions have changed" }, + { 0x063f01, "Microcode has been changed" }, + { 0x065a00, "Operator request or state change input (unspecified)" }, + { 0x065a01, "Operator medium removal request" }, + { 0x0bb900, "Play operation aborted" }, + /* Here we use 0xff for the key (not a valid key) to signify + * that these can have _any_ key value associated with them... */ + { 0xff0401, "Logical unit is in process of becoming ready" }, + { 0xff0400, "Logical unit not ready, cause not reportable" }, + { 0xff0402, "Logical unit not ready, initializing command required" }, + { 0xff0403, "Logical unit not ready, manual intervention required" }, + { 0xff0500, "Logical unit does not respond to selection" }, + { 0xff0800, "Logical unit communication failure" }, + { 0xff0802, "Logical unit communication parity error" }, + { 0xff0801, "Logical unit communication time-out" }, + { 0xff2500, "Logical unit not supported" }, + { 0xff4c00, "Logical unit failed self-configuration" }, + { 0xff3e00, "Logical unit has not self-configured yet" }, +}; + +void ide_cd_log_error(const char *name, struct request *failed_command, + struct request_sense *sense) +{ + int i; + const char *s = "bad sense key!"; + char buf[80]; + + printk(KERN_ERR "ATAPI device %s:\n", name); + if (sense->error_code == 0x70) + printk(KERN_CONT " Error: "); + else if (sense->error_code == 0x71) + printk(" Deferred Error: "); + else if (sense->error_code == 0x7f) + printk(KERN_CONT " Vendor-specific Error: "); + else + printk(KERN_CONT " Unknown Error Type: "); + + if (sense->sense_key < ARRAY_SIZE(sense_key_texts)) + s = sense_key_texts[sense->sense_key]; + + printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key); + + if (sense->asc == 0x40) { + sprintf(buf, "Diagnostic failure on component 0x%02x", + sense->ascq); + s = buf; + } else { + int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts); + unsigned long key = (sense->sense_key << 16); + + key |= (sense->asc << 8); + if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd)) + key |= sense->ascq; + s = NULL; + + while (hi > lo) { + mid = (lo + hi) / 2; + if (sense_data_texts[mid].asc_ascq == key || + sense_data_texts[mid].asc_ascq == (0xff0000|key)) { + s = sense_data_texts[mid].text; + break; + } else if (sense_data_texts[mid].asc_ascq > key) + hi = mid; + else + lo = mid + 1; + } + } + + if (s == NULL) { + if (sense->asc > 0x80) + s = "(vendor-specific error)"; + else + s = "(reserved error code)"; + } + + printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n", + s, sense->asc, sense->ascq); + + if (failed_command != NULL) { + int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts); + s = NULL; + + while (hi > lo) { + mid = (lo + hi) / 2; + if (packet_command_texts[mid].packet_command == + failed_command->cmd[0]) { + s = packet_command_texts[mid].text; + break; + } + if (packet_command_texts[mid].packet_command > + failed_command->cmd[0]) + hi = mid; + else + lo = mid + 1; + } + + printk(KERN_ERR " The failed \"%s\" packet command " + "was: \n \"", s); + for (i = 0; i < sizeof(failed_command->cmd); i++) + printk(KERN_CONT "%02x ", failed_command->cmd[i]); + printk(KERN_CONT "\"\n"); + } + + /* The SKSV bit specifies validity of the sense_key_specific + * in the next two commands. It is bit 7 of the first byte. + * In the case of NOT_READY, if SKSV is set the drive can + * give us nice ETA readings. + */ + if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) { + int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100; + + printk(KERN_ERR " Command is %02d%% complete\n", + progress / 0xffff); + } + + if (sense->sense_key == ILLEGAL_REQUEST && + (sense->sks[0] & 0x80) != 0) { + printk(KERN_ERR " Error in %s byte %d", + (sense->sks[0] & 0x40) != 0 ? + "command packet" : "command data", + (sense->sks[1] << 8) + sense->sks[2]); + + if ((sense->sks[0] & 0x40) != 0) + printk(KERN_CONT " bit %d", sense->sks[0] & 0x07); + + printk(KERN_CONT "\n"); + } +} +#endif