OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[libata scsi] add START STOP UNIT translation

This commit is contained in:
Douglas Gilbert 2005-08-11 03:35:53 -04:00 committed by Jeff Garzik
parent 4c71812261
commit 972dcafb6d
2 changed files with 58 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
drivers/scsi/libata-scsi.c
View File

@ -391,6 +391,60 @@ int ata_scsi_error(struct Scsi_Host *host)
return 0;
}
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
* @scsicmd: SCSI command to translate
*
* Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
* (to start). Perhaps these commands should be preceded by
* CHECK POWER MODE to see what power mode the device is already in.
* [See SAT revision 5 at www.t10.org]
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
* Zero on success, non-zero on error.
*/
static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
tf->protocol = ATA_PROT_NODATA;
if (scsicmd[1] & 0x1) {
; /* ignore IMMED bit, violates sat-r05 */
}
if (scsicmd[4] & 0x2)
return 1; /* LOEJ bit set not supported */
if (((scsicmd[4] >> 4) & 0xf) != 0)
return 1; /* power conditions not supported */
if (scsicmd[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
tf->lbah = 0x0;
tf->lbam = 0x0;
tf->lbal = 0x0;
tf->device |= ATA_LBA;
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
} else {
tf->nsect = 0; /* time period value (0 implies now) */
tf->command = ATA_CMD_STANDBY;
/* Consider: ATA STANDBY IMMEDIATE command */
}
/*
* Standby and Idle condition timers could be implemented but that
* would require libata to implement the Power condition mode page
* and allow the user to change it. Changing mode pages requires
* MODE SELECT to be implemented.
*/
return 0;
}
/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
@ -1435,6 +1489,8 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
case START_STOP:
return ata_scsi_start_stop_xlat;
}
return NULL;

2
include/linux/ata.h
View File

@ -108,6 +108,8 @@ enum {
/* ATA device commands */
ATA_CMD_CHK_POWER = 0xE5, /* check power mode */
ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
ATA_CMD_EDD = 0x90, /* execute device diagnostic */
ATA_CMD_FLUSH = 0xE7,
ATA_CMD_FLUSH_EXT = 0xEA,