regulator: sky81452: Adding Skyworks SKY81452 regulator driver

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Gyungoh Yoo 2014-08-08 18:10:22 +09:00 committed by Mark Brown
parent 7d1311b93e
commit 9839d627c2
4 changed files with 158 additions and 0 deletions

View File

@ -0,0 +1,16 @@
SKY81452 voltage regulator
Required properties:
- any required generic properties defined in regulator.txt
Optional properties:
- any available generic properties defined in regulator.txt
Example:
regulator {
/* generic regulator properties */
regulator-name = "touch_en";
regulator-min-microvolt = <4500000>;
regulator-max-microvolt = <8000000>;
};

View File

@ -483,6 +483,17 @@ config REGULATOR_S5M8767
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
supports DVS mode with 8bits of output voltage control.
config REGULATOR_SKY81452
tristate "Skyworks Solutions SKY81452 voltage regulator"
depends on SKY81452
help
This driver supports Skyworks SKY81452 voltage output regulator
via I2C bus. SKY81452 has one voltage linear regulator can be
programmed from 4.5V to 20V.
This driver can also be built as a module. If so, the module
will be called sky81452-regulator.
config REGULATOR_ST_PWM
tristate "STMicroelectronics PWM voltage regulator"
depends on ARCH_STI

View File

@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
obj-$(CONFIG_REGULATOR_ST_PWM) += st-pwm.o
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o

View File

@ -0,0 +1,130 @@
/*
* sky81452-regulator.c SKY81452 regulator driver
*
* Copyright 2014 Skyworks Solutions Inc.
* Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
/* registers */
#define SKY81452_REG1 0x01
#define SKY81452_REG3 0x03
/* bit mask */
#define SKY81452_LEN 0x40
#define SKY81452_LOUT 0x1F
static struct regulator_ops sky81452_reg_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_linear_range sky81452_reg_ranges[] = {
REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000),
REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000),
};
static const struct regulator_desc sky81452_reg = {
.name = "LOUT",
.ops = &sky81452_reg_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = SKY81452_LOUT + 1,
.linear_ranges = sky81452_reg_ranges,
.n_linear_ranges = ARRAY_SIZE(sky81452_reg_ranges),
.vsel_reg = SKY81452_REG3,
.vsel_mask = SKY81452_LOUT,
.enable_reg = SKY81452_REG1,
.enable_mask = SKY81452_LEN,
};
#ifdef CONFIG_OF
static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
{
struct regulator_init_data *init_data;
struct device_node *np;
np = of_get_child_by_name(dev->parent->of_node, "regulator");
if (unlikely(!np)) {
dev_err(dev, "regulator node not found");
return NULL;
}
init_data = of_get_regulator_init_data(dev, np);
of_node_put(np);
return init_data;
}
#else
static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
{
return ERR_PTR(-EINVAL);
}
#endif
static int sky81452_reg_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct regulator_init_data *init_data = dev_get_platdata(dev);
struct regulator_config config = { };
struct regulator_dev *rdev;
if (!init_data) {
init_data = sky81452_reg_parse_dt(dev);
if (IS_ERR(init_data))
return PTR_ERR(init_data);
}
config.dev = dev;
config.init_data = init_data;
config.of_node = dev->of_node;
config.regmap = dev_get_drvdata(dev->parent);
rdev = devm_regulator_register(dev, &sky81452_reg, &config);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
platform_set_drvdata(pdev, rdev);
return 0;
}
static struct platform_driver sky81452_reg_driver = {
.driver = {
.name = "sky81452-regulator",
},
.probe = sky81452_reg_probe,
};
module_platform_driver(sky81452_reg_driver);
MODULE_DESCRIPTION("Skyworks SKY81452 Regulator driver");
MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION("1.0");