CRIS: Add more delays in DDR setup

Also, make DDR latency configurable.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
This commit is contained in:
Jesper Nilsson 2010-08-03 17:34:28 +02:00
parent 2d0503d1a6
commit 98560bd83e
3 changed files with 21 additions and 1 deletions

View File

@ -33,6 +33,10 @@ config ETRAX_DDR2_CONFIG
hex "DDR2 config"
default "0"
config ETRAX_DDR2_LATENCY
hex "DDR2 latency"
default "0"
config ETRAX_PIO_CE0_CFG
hex "PIO CE0 configuration"
default "0"

View File

@ -24,11 +24,21 @@
;; Refer to ddr2 MDS for initialization sequence
; 2. Wait 200us
move.d 10000, $r2
1: bne 1b
subq 1, $r2
; Start clock
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0
move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1
move.d $r1, [$r0]
; 2. Wait 200us
move.d 10000, $r2
1: bne 1b
subq 1, $r2
; Reset phy and start calibration
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0
move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \
@ -52,6 +62,10 @@ do_cmd:
lslq 16, $r1
or.d $r3, $r1
move.d $r1, [$r0]
; 2. Wait 200us
move.d 10000, $r4
1: bne 1b
subq 1, $r4
cmp.d sdram_commands_end, $r2
blo command_loop
nop
@ -63,7 +77,7 @@ do_cmd:
; Set latency
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0
move.d 0x13, $r1
move.d CONFIG_ETRAX_DDR2_LATENCY, $r1
move.d $r1, [$r0]
; Set configuration

View File

@ -31,6 +31,8 @@
; Register values
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg)
.dword CONFIG_ETRAX_DDR2_CONFIG
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency)
.dword CONFIG_ETRAX_DDR2_LATENCY
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing)
.dword CONFIG_ETRAX_DDR2_TIMING
.dword CONFIG_ETRAX_DDR2_MRS