net: mdio-mux-mmioreg: Add support for 16bit and 32bit register sizes

In order to support PHY switching on Amlogic GXL SoCs, add support for
16bit and 32bit registers sizes.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Neil Armstrong 2016-11-04 16:51:22 +01:00 committed by David S. Miller
parent ddc5e15729
commit 9a4c803748
2 changed files with 49 additions and 15 deletions

View File

@ -3,7 +3,7 @@ Properties for an MDIO bus multiplexer controlled by a memory-mapped device
This is a special case of a MDIO bus multiplexer. A memory-mapped device,
like an FPGA, is used to control which child bus is connected. The mdio-mux
node must be a child of the memory-mapped device. The driver currently only
supports devices with eight-bit registers.
supports devices with 8, 16 or 32-bit registers.
Required properties in addition to the generic multiplexer properties:
@ -11,7 +11,7 @@ Required properties in addition to the generic multiplexer properties:
- reg : integer, contains the offset of the register that controls the bus
multiplexer. The size field in the 'reg' property is the size of
register, and must therefore be 1.
register, and must therefore be 1, 2, or 4.
- mux-mask : integer, contains an eight-bit mask that specifies which
bits in the register control the actual bus multiplexer. The

View File

@ -21,7 +21,8 @@
struct mdio_mux_mmioreg_state {
void *mux_handle;
phys_addr_t phys;
uint8_t mask;
unsigned int iosize;
unsigned int mask;
};
/*
@ -47,17 +48,47 @@ static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child,
struct mdio_mux_mmioreg_state *s = data;
if (current_child ^ desired_child) {
void __iomem *p = ioremap(s->phys, 1);
uint8_t x, y;
void __iomem *p = ioremap(s->phys, s->iosize);
if (!p)
return -ENOMEM;
x = ioread8(p);
y = (x & ~s->mask) | desired_child;
if (x != y) {
iowrite8((x & ~s->mask) | desired_child, p);
pr_debug("%s: %02x -> %02x\n", __func__, x, y);
switch (s->iosize) {
case sizeof(uint8_t): {
uint8_t x, y;
x = ioread8(p);
y = (x & ~s->mask) | desired_child;
if (x != y) {
iowrite8((x & ~s->mask) | desired_child, p);
pr_debug("%s: %02x -> %02x\n", __func__, x, y);
}
break;
}
case sizeof(uint16_t): {
uint16_t x, y;
x = ioread16(p);
y = (x & ~s->mask) | desired_child;
if (x != y) {
iowrite16((x & ~s->mask) | desired_child, p);
pr_debug("%s: %04x -> %04x\n", __func__, x, y);
}
break;
}
case sizeof(uint32_t): {
uint32_t x, y;
x = ioread32(p);
y = (x & ~s->mask) | desired_child;
if (x != y) {
iowrite32((x & ~s->mask) | desired_child, p);
pr_debug("%s: %08x -> %08x\n", __func__, x, y);
}
break;
}
}
iounmap(p);
@ -88,8 +119,11 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev)
}
s->phys = res.start;
if (resource_size(&res) != sizeof(uint8_t)) {
dev_err(&pdev->dev, "only 8-bit registers are supported\n");
s->iosize = resource_size(&res);
if (s->iosize != sizeof(uint8_t) &&
s->iosize != sizeof(uint16_t) &&
s->iosize != sizeof(uint32_t)) {
dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n");
return -EINVAL;
}
@ -98,8 +132,8 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "missing or invalid mux-mask property\n");
return -ENODEV;
}
if (be32_to_cpup(iprop) > 255) {
dev_err(&pdev->dev, "only 8-bit registers are supported\n");
if (be32_to_cpup(iprop) >= BIT(s->iosize * 8)) {
dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n");
return -EINVAL;
}
s->mask = be32_to_cpup(iprop);