ARM: keystone: dts: fix dt bindings for PCIe
Currently PCIe DT bindings are broken. PCIe driver can't function without having a SerDes driver that provide the phy configuration. On K2E EVM, this causes problem since the EVM has Marvell SATA controller present and with default values in the SerDes register, it seems to pass the PCIe link check, but causes issues since the configuration is not correct. The manifestation is that when EVM is booted with NFS rootfs, the boot hangs. We shouldn't enable PCIe on this EVM since to work, SerDes driver has to be present as well. So by default, the PCIe DT binding should be disabled in SoC specific DTS. It can be enabled in the board specific DTS when the SerDes device driver is also present. So fix the status of PCIe DT bindings in the SoC specific DTS to "disabled". To enable PCIe, the status should be set to "ok" in the EVM DTS file when SerDes driver support becomes available in the upstream tree. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
This commit is contained in:
parent
5ebe6afaf0
commit
9dd4f28f36
|
@ -96,6 +96,7 @@
|
||||||
ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
|
ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
|
||||||
0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
|
0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
|
||||||
|
|
||||||
|
status = "disabled";
|
||||||
device_type = "pci";
|
device_type = "pci";
|
||||||
num-lanes = <2>;
|
num-lanes = <2>;
|
||||||
|
|
||||||
|
|
|
@ -296,6 +296,7 @@
|
||||||
ranges = <0x81000000 0 0 0x23250000 0 0x4000
|
ranges = <0x81000000 0 0 0x23250000 0 0x4000
|
||||||
0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
|
0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
|
||||||
|
|
||||||
|
status = "disabled";
|
||||||
device_type = "pci";
|
device_type = "pci";
|
||||||
num-lanes = <2>;
|
num-lanes = <2>;
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue