dmaengine: stm32-dma: properly mask irq bits

A single register of the controller holds the information for four dma
channels.
The functions stm32_dma_irq_status() don't mask the relevant bits after
the shift, thus adjacent channel's status is also reported in the returned
value.
Fixed by masking the value before returning it.

Similarly, the function stm32_dma_irq_clear() don't mask the input value
before shifting it, thus an incorrect input value could disable the
interrupts of adjacent channels.
Fixed by masking the input value before using it.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This commit is contained in:
Pierre Yves MORDRET 2018-03-13 17:42:05 +01:00 committed by Vinod Koul
parent 80a76952a5
commit 9df3bd5520
1 changed files with 6 additions and 1 deletions

View File

@ -38,6 +38,10 @@
#define STM32_DMA_TEI BIT(3) /* Transfer Error Interrupt */
#define STM32_DMA_DMEI BIT(2) /* Direct Mode Error Interrupt */
#define STM32_DMA_FEI BIT(0) /* FIFO Error Interrupt */
#define STM32_DMA_MASKI (STM32_DMA_TCI \
| STM32_DMA_TEI \
| STM32_DMA_DMEI \
| STM32_DMA_FEI)
/* DMA Stream x Configuration Register */
#define STM32_DMA_SCR(x) (0x0010 + 0x18 * (x)) /* x = 0..7 */
@ -405,7 +409,7 @@ static u32 stm32_dma_irq_status(struct stm32_dma_chan *chan)
flags = dma_isr >> (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
return flags;
return flags & STM32_DMA_MASKI;
}
static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
@ -420,6 +424,7 @@ static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
* If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
* If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
*/
flags &= STM32_DMA_MASKI;
dma_ifcr = flags << (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
if (chan->id & 4)