From abad398337f038f5822e53c55eff5b0820ef7efe Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Wed, 8 Apr 2015 18:26:12 +0300 Subject: [PATCH 001/652] iio: pressure: bmp280: fix temp compensation Temperature reads on bmp280 device always return 0, due to a missing step in the compensation formula (data->tfine is never initialized). Initialize data->tfine value so we get correct temperature and pressure values. Signed-off-by: Irina Tirdea Reviewed-by: Vlad Dogaru Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index 7c623e2bd633..a2602d8dd6d5 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -172,6 +172,7 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data, var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) * ((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) * ((s32)(s16)le16_to_cpu(buf[T3]))) >> 14; + data->t_fine = var1 + var2; return (data->t_fine * 5 + 128) >> 8; } From d0716b0ea4ce11a13477163c14b26e180922ba51 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 6 Apr 2015 11:38:20 -0700 Subject: [PATCH 002/652] iio/axp288_adc: add missing channel info mask Commit 65de7654d39c70c2b ("iio: iio: Fix iio_channel_read return if channel havn't info") added a check for valid info masks. This patch adds missing channel info masks for all ADC channels. Otherwise, iio_read_channel_raw() would return -EINVAL when called by consumer drivers. Note that the change of _processed to _raw actually fixes an ABI abuse in the original driver where it was used to avoid some special handling rather than because it was correct. Signed-off-by: Jacob Pan Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/axp288_adc.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 08bcfb061ca5..56008a86b78f 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -53,39 +53,42 @@ static const struct iio_chan_spec const axp288_adc_channels[] = { .channel = 0, .address = AXP288_TS_ADC_H, .datasheet_name = "TS_PIN", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_TEMP, .channel = 1, .address = AXP288_PMIC_ADC_H, .datasheet_name = "PMIC_TEMP", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_TEMP, .channel = 2, .address = AXP288_GP_ADC_H, .datasheet_name = "GPADC", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_CURRENT, .channel = 3, .address = AXP20X_BATT_CHRG_I_H, .datasheet_name = "BATT_CHG_I", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_CURRENT, .channel = 4, .address = AXP20X_BATT_DISCHRG_I_H, .datasheet_name = "BATT_DISCHRG_I", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_VOLTAGE, .channel = 5, .address = AXP20X_BATT_V_H, .datasheet_name = "BATT_V", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, }; @@ -151,9 +154,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev, chan->address)) dev_err(&indio_dev->dev, "TS pin restore\n"); break; - case IIO_CHAN_INFO_PROCESSED: - ret = axp288_adc_read_channel(val, chan->address, info->regmap); - break; default: ret = -EINVAL; } From 5df07b74f671d1dfc1d81c3e791c335183cfc515 Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Tue, 14 Apr 2015 15:23:25 +1000 Subject: [PATCH 003/652] Remove celleb-only SCC PATA drivers The SCC PATA interface is only used by celleb. celleb has been dropped [1], so drop the drivers. [1] http://patchwork.ozlabs.org/patch/451730/ CC: "David S. Miller" CC: linux-ide@vger.kernel.org CC: Valentin Rothberg CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlab.org Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Daniel Axtens Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 9 - drivers/ata/Makefile | 1 - drivers/ata/pata_scc.c | 1110 ---------------------------------------- drivers/ide/Kconfig | 9 - drivers/ide/Makefile | 1 - drivers/ide/scc_pata.c | 887 -------------------------------- 6 files changed, 2017 deletions(-) delete mode 100644 drivers/ata/pata_scc.c delete mode 100644 drivers/ide/scc_pata.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f601553b9b0..ee5209fb82b2 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -729,15 +729,6 @@ config PATA_SC1200 If unsure, say N. -config PATA_SCC - tristate "Toshiba's Cell Reference Set IDE support" - depends on PCI && PPC_CELLEB - help - This option enables support for the built-in IDE controller on - Toshiba Cell Reference Board. - - If unsure, say N. - config PATA_SCH tristate "Intel SCH PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b67e995179a9..40f7865f20a1 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o obj-$(CONFIG_PATA_RDC) += pata_rdc.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o -obj-$(CONFIG_PATA_SCC) += pata_scc.o obj-$(CONFIG_PATA_SCH) += pata_sch.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o obj-$(CONFIG_PATA_SIL680) += pata_sil680.o diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c deleted file mode 100644 index 5cd60d6388ec..000000000000 --- a/drivers/ata/pata_scc.c +++ /dev/null @@ -1,1110 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ata/ata_piix.c: - * Copyright 2003-2005 Red Hat Inc - * Copyright 2003-2005 Jeff Garzik - * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - * Copyright (C) 1998-2000 Andre Hedrick - * Copyright (C) 2003 Red Hat Inc - * - * and drivers/ata/ahci.c: - * Copyright 2004-2005 Red Hat, Inc. - * - * and drivers/ata/libata-core.c: - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "pata_scc" -#define DRV_VERSION "0.3" - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -/* PCI BARs */ -#define SCC_CTRL_BAR 0 -#define SCC_BMID_BAR 1 - -/* offset of CTRL registers */ -#define SCC_CTL_PIOSHT 0x000 -#define SCC_CTL_PIOCT 0x004 -#define SCC_CTL_MDMACT 0x008 -#define SCC_CTL_MCRCST 0x00C -#define SCC_CTL_SDMACT 0x010 -#define SCC_CTL_SCRCST 0x014 -#define SCC_CTL_UDENVT 0x018 -#define SCC_CTL_TDVHSEL 0x020 -#define SCC_CTL_MODEREG 0x024 -#define SCC_CTL_ECMODE 0xF00 -#define SCC_CTL_MAEA0 0xF50 -#define SCC_CTL_MAEC0 0xF54 -#define SCC_CTL_CCKCTRL 0xFF0 - -/* offset of BMID registers */ -#define SCC_DMA_CMD 0x000 -#define SCC_DMA_STATUS 0x004 -#define SCC_DMA_TABLE_OFS 0x008 -#define SCC_DMA_INTMASK 0x010 -#define SCC_DMA_INTST 0x014 -#define SCC_DMA_PTERADD 0x018 -#define SCC_REG_CMD_ADDR 0x020 -#define SCC_REG_DATA 0x000 -#define SCC_REG_ERR 0x004 -#define SCC_REG_FEATURE 0x004 -#define SCC_REG_NSECT 0x008 -#define SCC_REG_LBAL 0x00C -#define SCC_REG_LBAM 0x010 -#define SCC_REG_LBAH 0x014 -#define SCC_REG_DEVICE 0x018 -#define SCC_REG_STATUS 0x01C -#define SCC_REG_CMD 0x01C -#define SCC_REG_ALTSTATUS 0x020 - -/* register value */ -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define ECMODE_VALUE 0x01 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - - -/* PIO transfer mode table */ -/* JCHST */ -static const unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static const unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static const unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static const unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static const unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static const unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static const unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static const unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0}, - { } /* terminate list */ -}; - -/** - * scc_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int pio = adev->pio_mode - XFER_PIO_0; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT; - void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT; - unsigned long reg; - int offset; - - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32(piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32(pioct_port, reg); -} - -/** - * scc_set_dmamode - Initialize host controller PATA DMA timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set UDMA mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int udma = adev->dma_mode; - unsigned int is_slave = (adev->devno != 0); - u8 speed = udma; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT; - void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST; - void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT; - void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST; - void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT; - void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL; - int offset, idx; - - if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - if (speed >= XFER_UDMA_0) - idx = speed - XFER_UDMA_0; - else - return; - - if (is_slave) { - out_be32(sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(scrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2)); - } else { - out_be32(mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]); - } - out_be32(udenvt_port, - JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]); -} - -unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) -{ - /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */ - if (adev->class == ATA_DEV_ATAPI && - (mask & (0xE0 << ATA_SHIFT_UDMA))) { - printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); - mask &= ~(0xE0 << ATA_SHIFT_UDMA); - } - return mask; -} - -/** - * scc_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_tf_load(). - */ - -static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - out_be32(ioaddr->feature_addr, tf->hob_feature); - out_be32(ioaddr->nsect_addr, tf->hob_nsect); - out_be32(ioaddr->lbal_addr, tf->hob_lbal); - out_be32(ioaddr->lbam_addr, tf->hob_lbam); - out_be32(ioaddr->lbah_addr, tf->hob_lbah); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - out_be32(ioaddr->feature_addr, tf->feature); - out_be32(ioaddr->nsect_addr, tf->nsect); - out_be32(ioaddr->lbal_addr, tf->lbal); - out_be32(ioaddr->lbam_addr, tf->lbam); - out_be32(ioaddr->lbah_addr, tf->lbah); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - out_be32(ioaddr->device_addr, tf->device); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * scc_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Note: Original code is ata_check_status(). - */ - -static u8 scc_check_status (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.status_addr); -} - -/** - * scc_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Note: Original code is ata_sff_tf_read(). - */ - -static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = scc_check_status(ap); - tf->feature = in_be32(ioaddr->error_addr); - tf->nsect = in_be32(ioaddr->nsect_addr); - tf->lbal = in_be32(ioaddr->lbal_addr); - tf->lbam = in_be32(ioaddr->lbam_addr); - tf->lbah = in_be32(ioaddr->lbah_addr); - tf->device = in_be32(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB); - tf->hob_feature = in_be32(ioaddr->error_addr); - tf->hob_nsect = in_be32(ioaddr->nsect_addr); - tf->hob_lbal = in_be32(ioaddr->lbal_addr); - tf->hob_lbam = in_be32(ioaddr->lbam_addr); - tf->hob_lbah = in_be32(ioaddr->lbah_addr); - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - } -} - -/** - * scc_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_exec_command(). - */ - -static void scc_exec_command (struct ata_port *ap, - const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); - - out_be32(ap->ioaddr.command_addr, tf->command); - ata_sff_pause(ap); -} - -/** - * scc_check_altstatus - Read device alternate status reg - * @ap: port where the device is - */ - -static u8 scc_check_altstatus (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.altstatus_addr); -} - -/** - * scc_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Note: Original code is ata_sff_dev_select(). - */ - -static void scc_dev_select (struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - out_be32(ap->ioaddr.device_addr, tmp); - ata_sff_pause(ap); -} - -/** - * scc_set_devctl - Write device control reg - * @ap: port where the device is - * @ctl: value to write - */ - -static void scc_set_devctl(struct ata_port *ap, u8 ctl) -{ - out_be32(ap->ioaddr.ctl_addr, ctl); -} - -/** - * scc_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_setup(). - */ - -static void scc_bmdma_setup (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* load PRD table addr */ - out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma); - - /* specify data direction, triple-check start bit is clear */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - out_be32(mmio + SCC_DMA_CMD, dmactl); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); -} - -/** - * scc_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_start(). - */ - -static void scc_bmdma_start (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* start host DMA transaction */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START); -} - -/** - * scc_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Note: Original code is ata_devchk(). - */ - -static unsigned int scc_devchk (struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->sff_dev_select(ap, device); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - out_be32(ioaddr->nsect_addr, 0xaa); - out_be32(ioaddr->lbal_addr, 0x55); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * scc_wait_after_reset - wait for devices to become ready after reset - * - * Note: Original code is ata_sff_wait_after_reset - */ - -static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - int rc, ret = 0; - - /* Spec mandates ">= 2ms" before checking status. We wait - * 150ms, because that was the magic delay used for ATAPI - * devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready. - */ - ata_msleep(ap, 150); - - /* always check readiness of the master device */ - rc = ata_sff_wait_ready(link, deadline); - /* -ENODEV means the odd clown forgot the D7 pulldown resistor - * and TF status is 0xff, bail out on it too. - */ - if (rc) - return rc; - - /* if device 1 was found in ata_devchk, wait for register - * access briefly, then wait for BSY to clear. - */ - if (dev1) { - int i; - - ap->ops->sff_dev_select(ap, 1); - - /* Wait for register access. Some ATAPI devices fail - * to set nsect/lbal after reset, so don't waste too - * much time on it. We're gonna wait for !BSY anyway. - */ - for (i = 0; i < 2; i++) { - u8 nsect, lbal; - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - if ((nsect == 1) && (lbal == 1)) - break; - ata_msleep(ap, 50); /* give drive a breather */ - } - - rc = ata_sff_wait_ready(link, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* is all this really necessary? */ - ap->ops->sff_dev_select(ap, 0); - if (dev1) - ap->ops->sff_dev_select(ap, 1); - if (dev0) - ap->ops->sff_dev_select(ap, 0); - - return ret; -} - -/** - * scc_bus_softreset - PATA device software reset - * - * Note: Original code is ata_bus_softreset(). - */ - -static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); - - /* software reset. causes dev0 to be selected */ - out_be32(ioaddr->ctl_addr, ap->ctl); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl); - - return scc_wait_after_reset(&ap->link, devmask, deadline); -} - -/** - * scc_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * @deadline: deadline jiffies for the operation - * - * Note: Original code is ata_sff_softreset(). - */ - -static int scc_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0; - int rc; - u8 err; - - DPRINTK("ENTER\n"); - - /* determine if device 0/1 are present */ - if (scc_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && scc_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->sff_dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - rc = scc_bus_softreset(ap, devmask, deadline); - if (rc) { - ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_sff_dev_classify(&ap->link.device[0], - devmask & (1 << 0), &err); - if (slave_possible && err != 0x81) - classes[1] = ata_sff_dev_classify(&ap->link.device[1], - devmask & (1 << 1), &err); - - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * scc_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - */ - -static void scc_bmdma_stop (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR]; - u32 reg; - - while (1) { - reg = in_be32(bmid_base + SCC_DMA_INTST); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0); - maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0); - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - unsigned int classes; - unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); - printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); - /* TBD: SW reset */ - scc_softreset(&ap->link, &classes, deadline); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS); - continue; - } - break; - } - - /* clear start/stop bit */ - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_dma_pause(ap); /* dummy read */ -} - -/** - * scc_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - */ - -static u8 scc_bmdma_status (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); - u32 int_status = in_be32(mmio + SCC_DMA_INTST); - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); - static int retry = 0; - - /* return if IOS_SS is cleared */ - if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START)) - return host_stat; - - /* errata A252,A308 workaround: Step4 */ - if ((scc_check_altstatus(ap) & ATA_ERR) - && (int_status & INTSTS_INTRQ)) - return (host_stat | ATA_DMA_INTR); - - /* errata A308 workaround Step5 */ - if (int_status & INTSTS_IOIRQS) { - host_stat |= ATA_DMA_INTR; - - /* We don't check ATAPI DMA because it is limited to UDMA4 */ - if ((qc->tf.protocol == ATA_PROT_DMA && - qc->dev->xfer_mode > XFER_UDMA_4)) { - if (!(int_status & INTSTS_ACTEINT)) { - printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n", - ap->print_id); - host_stat |= ATA_DMA_ERR; - if (retry++) - ap->udma_mask &= ~(1 << qc->dev->xfer_mode); - } else - retry = 0; - } - } - - return host_stat; -} - -/** - * scc_data_xfer - Transfer data by PIO - * @dev: device for this I/O - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Note: Original code is ata_sff_data_xfer(). - */ - -static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - struct ata_port *ap = dev->link->ap; - unsigned int words = buflen >> 1; - unsigned int i; - __le16 *buf16 = (__le16 *) buf; - void __iomem *mmio = ap->ioaddr.data_addr; - - /* Transfer multiple of 2 bytes */ - if (rw == READ) - for (i = 0; i < words; i++) - buf16[i] = cpu_to_le16(in_be32(mmio)); - else - for (i = 0; i < words; i++) - out_be32(mmio, le16_to_cpu(buf16[i])); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (rw == READ) { - align_buf[0] = cpu_to_le16(in_be32(mmio)); - memcpy(trailing_buf, align_buf, 1); - } else { - memcpy(align_buf, trailing_buf, 1); - out_be32(mmio, le16_to_cpu(align_buf[0])); - } - words++; - } - - return words << 1; -} - -/** - * scc_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * Note: Original code is ata_sff_postreset(). - */ - -static void scc_postreset(struct ata_link *link, unsigned int *classes) -{ - struct ata_port *ap = link->ap; - - DPRINTK("ENTER\n"); - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - out_be32(ap->ioaddr.ctl_addr, ap->ctl); - - DPRINTK("EXIT\n"); -} - -/** - * scc_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_irq_clear(). - */ - -static void scc_irq_clear (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - if (!mmio) - return; - - out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS)); -} - -/** - * scc_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Allocate space for PRD table using ata_bmdma_port_start(). - * Set PRD table address for PTERADD. (PRD Transfer End Read) - */ - -static int scc_port_start (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - int rc; - - rc = ata_bmdma_port_start(ap); - if (rc) - return rc; - - out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma); - return 0; -} - -/** - * scc_port_stop - Undo scc_port_start() - * @ap: Port to shut down - * - * Reset PTERADD. - */ - -static void scc_port_stop (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - out_be32(mmio + SCC_DMA_PTERADD, 0); -} - -static struct scsi_host_template scc_sht = { - ATA_BMDMA_SHT(DRV_NAME), -}; - -static struct ata_port_operations scc_pata_ops = { - .inherits = &ata_bmdma_port_ops, - - .set_piomode = scc_set_piomode, - .set_dmamode = scc_set_dmamode, - .mode_filter = scc_mode_filter, - - .sff_tf_load = scc_tf_load, - .sff_tf_read = scc_tf_read, - .sff_exec_command = scc_exec_command, - .sff_check_status = scc_check_status, - .sff_check_altstatus = scc_check_altstatus, - .sff_dev_select = scc_dev_select, - .sff_set_devctl = scc_set_devctl, - - .bmdma_setup = scc_bmdma_setup, - .bmdma_start = scc_bmdma_start, - .bmdma_stop = scc_bmdma_stop, - .bmdma_status = scc_bmdma_status, - .sff_data_xfer = scc_data_xfer, - - .cable_detect = ata_cable_80wire, - .softreset = scc_softreset, - .postreset = scc_postreset, - - .sff_irq_clear = scc_irq_clear, - - .port_start = scc_port_start, - .port_stop = scc_port_stop, -}; - -static struct ata_port_info scc_port_info[] = { - { - .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, - /* No MWDMA */ - .udma_mask = ATA_UDMA6, - .port_ops = &scc_pata_ops, - }, -}; - -/** - * scc_reset_controller - initialize SCC PATA controller. - */ - -static int scc_reset_controller(struct ata_host *host) -{ - void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = host->iomap[SCC_BMID_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG; - void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE; - void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK; - void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS; - u32 reg = 0; - - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32(cckctrl_port, reg); - - for (;;) { - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32(cckctrl_port, reg); - out_be32(ecmode_port, ECMODE_VALUE); - out_be32(mode_port, MODE_JCUSFEN); - out_be32(intmask_port, INTMASK_MSK); - - if (in_be32(dmastatus_port) & QCHSD_STPDIAG) { - printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME); - return -EIO; - } - - return 0; -} - -/** - * scc_setup_ports - initialize ioaddr with SCC PATA port offsets. - * @ioaddr: IO address structure to be initialized - * @base: base address of BMID region - */ - -static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base) -{ - ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR; - ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->bmdma_addr = base; - ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD; -} - -static int scc_host_init(struct ata_host *host) -{ - struct pci_dev *pdev = to_pci_dev(host->dev); - int rc; - - rc = scc_reset_controller(host); - if (rc) - return rc; - - rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - - scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]); - - pci_set_master(pdev); - - return 0; -} - -/** - * scc_init_one - Register SCC PATA device with kernel services - * @pdev: PCI device to register - * @ent: Entry in scc_pci_tbl matching with @pdev - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, or -ERRNO value. - */ - -static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - unsigned int board_idx = (unsigned int) ent->driver_data; - const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL }; - struct ata_host *host; - int rc; - - ata_print_version_once(&pdev->dev, DRV_VERSION); - - host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); - if (!host) - return -ENOMEM; - - rc = pcim_enable_device(pdev); - if (rc) - return rc; - - rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME); - if (rc == -EBUSY) - pcim_pin_device(pdev); - if (rc) - return rc; - host->iomap = pcim_iomap_table(pdev); - - ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); - ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); - - rc = scc_host_init(host); - if (rc) - return rc; - - return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, - IRQF_SHARED, &scc_sht); -} - -static struct pci_driver scc_pci_driver = { - .name = DRV_NAME, - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = ata_pci_remove_one, -#ifdef CONFIG_PM_SLEEP - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, -#endif -}; - -module_pci_driver(scc_pci_driver); - -MODULE_AUTHOR("Toshiba corp"); -MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); -MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index a04c49f2a011..39ea67f9b066 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -643,15 +643,6 @@ config BLK_DEV_TC86C001 help This driver adds support for Toshiba TC86C001 GOKU-S chip. -config BLK_DEV_CELLEB - tristate "Toshiba's Cell Reference Set IDE support" - depends on PPC_CELLEB - select BLK_DEV_IDEDMA_PCI - help - This driver provides support for the on-board IDE controller on - Toshiba Cell Reference Board. - If unsure, say Y. - endif # TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index a04ee82f1c8f..2a8c417d4081 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o -obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c deleted file mode 100644 index 2a2d188b5d5b..000000000000 --- a/drivers/ide/scc_pata.c +++ /dev/null @@ -1,887 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ide/pci/siimage.c: - * Copyright (C) 2001-2002 Andre Hedrick - * Copyright (C) 2003 Red Hat - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -#define SCC_PATA_NAME "scc IDE" - -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - -#define ECMODE_VALUE 0x01 - -static struct scc_ports { - unsigned long ctl, dma; - struct ide_host *host; /* for removing port from system */ -} scc_ports[MAX_HWIFS]; - -/* PIO transfer mode table */ -/* JCHST */ -static unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - - -static u8 scc_ide_inb(unsigned long port) -{ - u32 data = in_be32((void*)port); - return (u8)data; -} - -static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - out_be32((void *)hwif->io_ports.command_addr, cmd); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static u8 scc_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.status_addr); -} - -static u8 scc_read_altstatus(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.ctl_addr); -} - -static u8 scc_dma_sff_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)(hwif->dma_base + 4)); -} - -static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl) -{ - out_be32((void *)hwif->io_ports.ctl_addr, ctl); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static void scc_ide_insw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_insl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_outb(u8 addr, unsigned long port) -{ - out_be32((void*)port, addr); -} - -static void -scc_ide_outsw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -static void -scc_ide_outsl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -/** - * scc_set_pio_mode - set host controller for PIO mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long piosht_port = ctl_base + 0x000; - unsigned long pioct_port = ctl_base + 0x004; - unsigned long reg; - int offset; - const u8 pio = drive->pio_mode - XFER_PIO_0; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32((void __iomem *)piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32((void __iomem *)pioct_port, reg); -} - -/** - * scc_set_dma_mode - set host controller for DMA mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long mdmact_port = ctl_base + 0x008; - unsigned long mcrcst_port = ctl_base + 0x00c; - unsigned long sdmact_port = ctl_base + 0x010; - unsigned long scrcst_port = ctl_base + 0x014; - unsigned long udenvt_port = ctl_base + 0x018; - unsigned long tdvhsel_port = ctl_base + 0x020; - int is_slave = drive->dn & 1; - int offset, idx; - unsigned long reg; - unsigned long jcactsel; - const u8 speed = drive->dma_mode; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - - idx = speed - XFER_UDMA_0; - - jcactsel = JCACTSELtbl[offset][idx]; - if (is_slave) { - out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); - jcactsel = jcactsel << 2; - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); - } else { - out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); - } - reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; - out_be32((void __iomem *)udenvt_port, reg); -} - -static void scc_dma_host_set(ide_drive_t *drive, int on) -{ - ide_hwif_t *hwif = drive->hwif; - u8 unit = drive->dn & 1; - u8 dma_stat = scc_dma_sff_read_status(hwif); - - if (on) - dma_stat |= (1 << (5 + unit)); - else - dma_stat &= ~(1 << (5 + unit)); - - scc_ide_outb(dma_stat, hwif->dma_base + 4); -} - -/** - * scc_dma_setup - begin a DMA phase - * @drive: target device - * @cmd: command - * - * Build an IDE DMA PRD (IDE speak for scatter gather table) - * and then set up the DMA transfer registers. - * - * Returns 0 on success. If a PIO fallback is required then 1 - * is returned. - */ - -static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; - u8 dma_stat; - - /* fall back to pio! */ - if (ide_build_dmatable(drive, cmd) == 0) - return 1; - - /* PRD table */ - out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); - - /* specify r/w */ - out_be32((void __iomem *)hwif->dma_base, rw); - - /* read DMA status for INTR & ERROR flags */ - dma_stat = scc_dma_sff_read_status(hwif); - - /* clear INTR & ERROR flags */ - out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); - - return 0; -} - -static void scc_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_cmd = scc_ide_inb(hwif->dma_base); - - /* start DMA */ - scc_ide_outb(dma_cmd | 1, hwif->dma_base); -} - -static int __scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_stat, dma_cmd; - - /* get DMA command mode */ - dma_cmd = scc_ide_inb(hwif->dma_base); - /* stop DMA */ - scc_ide_outb(dma_cmd & ~1, hwif->dma_base); - /* get DMA status */ - dma_stat = scc_dma_sff_read_status(hwif); - /* clear the INTR & ERROR bits */ - scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); - /* verify good DMA status */ - return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; -} - -/** - * scc_dma_end - Stop DMA - * @drive: IDE drive - * - * Check and clear INT Status register. - * Then call __scc_dma_end(). - */ - -static int scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - void __iomem *dma_base = (void __iomem *)hwif->dma_base; - unsigned long intsts_port = hwif->dma_base + 0x014; - u32 reg; - int dma_stat, data_loss = 0; - static int retry = 0; - - /* errata A308 workaround: Step5 (check data loss) */ - /* We don't check non ide_disk because it is limited to UDMA4 */ - if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { - reg = in_be32((void __iomem *)intsts_port); - if (!(reg & INTSTS_ACTEINT)) { - printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", - drive->name); - data_loss = 1; - if (retry++) { - struct request *rq = hwif->rq; - ide_drive_t *drive; - int i; - - /* ERROR_RESET and drive->crc_count are needed - * to reduce DMA transfer mode in retry process. - */ - if (rq) - rq->errors |= ERROR_RESET; - - ide_port_for_each_dev(i, drive, hwif) - drive->crc_count++; - } - } - } - - while (1) { - reg = in_be32((void __iomem *)intsts_port); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - unsigned long ctl_base = hwif->config_data; - - maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); - maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); - - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); - - out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - - printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); - - ide_do_reset(drive); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32((void __iomem *)intsts_port, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); - continue; - } - break; - } - - dma_stat = __scc_dma_end(drive); - if (data_loss) - dma_stat |= 2; /* emulate DMA error (to retry command) */ - return dma_stat; -} - -/* returns 1 if dma irq issued, 0 otherwise */ -static int scc_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); - - /* SCC errata A252,A308 workaround: Step4 */ - if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - (int_stat & INTSTS_INTRQ)) - return 1; - - /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ - if (int_stat & INTSTS_IOIRQS) - return 1; - - return 0; -} - -static u8 scc_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mask = hwif->ultra_mask; - - /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ - if ((drive->media != ide_disk) && (mask & 0xE0)) { - printk(KERN_INFO "%s: limit %s to UDMA4\n", - SCC_PATA_NAME, drive->name); - mask = ATA_UDMA4; - } - - return mask; -} - -/** - * setup_mmio_scc - map CTRL/BMID region - * @dev: PCI device we are configuring - * @name: device name - * - */ - -static int setup_mmio_scc (struct pci_dev *dev, const char *name) -{ - void __iomem *ctl_addr; - void __iomem *dma_addr; - int i, ret; - - for (i = 0; i < MAX_HWIFS; i++) { - if (scc_ports[i].ctl == 0) - break; - } - if (i >= MAX_HWIFS) - return -ENOMEM; - - ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); - if (ret < 0) { - printk(KERN_ERR "%s: can't reserve resources\n", name); - return ret; - } - - ctl_addr = pci_ioremap_bar(dev, 0); - if (!ctl_addr) - goto fail_0; - - dma_addr = pci_ioremap_bar(dev, 1); - if (!dma_addr) - goto fail_1; - - pci_set_master(dev); - scc_ports[i].ctl = (unsigned long)ctl_addr; - scc_ports[i].dma = (unsigned long)dma_addr; - pci_set_drvdata(dev, (void *) &scc_ports[i]); - - return 1; - - fail_1: - iounmap(ctl_addr); - fail_0: - return -ENOMEM; -} - -static int scc_ide_setup_pci_device(struct pci_dev *dev, - const struct ide_port_info *d) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host; - struct ide_hw hw, *hws[] = { &hw }; - int i, rc; - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 8; i++) - hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; - hw.irq = dev->irq; - hw.dev = &dev->dev; - - rc = ide_host_add(d, hws, 1, &host); - if (rc) - return rc; - - ports->host = host; - - return 0; -} - -/** - * init_setup_scc - set up an SCC PATA Controller - * @dev: PCI device - * @d: IDE port info - * - * Perform the initial set up for this device. - */ - -static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d) -{ - unsigned long ctl_base; - unsigned long dma_base; - unsigned long cckctrl_port; - unsigned long intmask_port; - unsigned long mode_port; - unsigned long ecmode_port; - u32 reg = 0; - struct scc_ports *ports; - int rc; - - rc = pci_enable_device(dev); - if (rc) - goto end; - - rc = setup_mmio_scc(dev, d->name); - if (rc < 0) - goto end; - - ports = pci_get_drvdata(dev); - ctl_base = ports->ctl; - dma_base = ports->dma; - cckctrl_port = ctl_base + 0xff0; - intmask_port = dma_base + 0x010; - mode_port = ctl_base + 0x024; - ecmode_port = ctl_base + 0xf00; - - /* controller initialization */ - reg = 0; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32((void*)cckctrl_port, reg); - - for (;;) { - reg = in_be32((void*)cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32((void*)cckctrl_port, reg); - - out_be32((void*)ecmode_port, ECMODE_VALUE); - out_be32((void*)mode_port, MODE_JCUSFEN); - out_be32((void*)intmask_port, INTMASK_MSK); - - rc = scc_ide_setup_pci_device(dev, d); - - end: - return rc; -} - -static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->lbah, io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - scc_ide_outb(tf->device, io_ports->device_addr); -} - -static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_ERROR) - tf->error = scc_ide_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - tf->device = scc_ide_inb(io_ports->device_addr); -} - -static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_insl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_insw(data_addr, buf, len / 2); -} - -static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_outsl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_outsw(data_addr, buf, len / 2); -} - -/** - * init_mmio_iops_scc - set up the iops for MMIO - * @hwif: interface to set up - * - */ - -static void init_mmio_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct scc_ports *ports = pci_get_drvdata(dev); - unsigned long dma_base = ports->dma; - - ide_set_hwifdata(hwif, ports); - - hwif->dma_base = dma_base; - hwif->config_data = ports->ctl; -} - -/** - * init_iops_scc - set up iops - * @hwif: interface to set up - * - * Do the basic setup for the SCC hardware interface - * and then do the MMIO setup. - */ - -static void init_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->hwif_data = NULL; - if (pci_get_drvdata(dev) == NULL) - return; - init_mmio_iops_scc(hwif); -} - -static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) -{ - return ide_allocate_dma_engine(hwif); -} - -static u8 scc_cable_detect(ide_hwif_t *hwif) -{ - return ATA_CBL_PATA80; -} - -/** - * init_hwif_scc - set up hwif - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SCC - * requires several custom handlers so we override the default - * ide DMA handlers appropriately. - */ - -static void init_hwif_scc(ide_hwif_t *hwif) -{ - /* PTERADD */ - out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); - - if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) - hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ - else - hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ -} - -static const struct ide_tp_ops scc_tp_ops = { - .exec_command = scc_exec_command, - .read_status = scc_read_status, - .read_altstatus = scc_read_altstatus, - .write_devctl = scc_write_devctl, - - .dev_select = ide_dev_select, - .tf_load = scc_tf_load, - .tf_read = scc_tf_read, - - .input_data = scc_input_data, - .output_data = scc_output_data, -}; - -static const struct ide_port_ops scc_port_ops = { - .set_pio_mode = scc_set_pio_mode, - .set_dma_mode = scc_set_dma_mode, - .udma_filter = scc_udma_filter, - .cable_detect = scc_cable_detect, -}; - -static const struct ide_dma_ops scc_dma_ops = { - .dma_host_set = scc_dma_host_set, - .dma_setup = scc_dma_setup, - .dma_start = scc_dma_start, - .dma_end = scc_dma_end, - .dma_test_irq = scc_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timer_expiry = ide_dma_sff_timer_expiry, - .dma_sff_read_status = scc_dma_sff_read_status, -}; - -static const struct ide_port_info scc_chipset = { - .name = "sccIDE", - .init_iops = init_iops_scc, - .init_dma = scc_init_dma, - .init_hwif = init_hwif_scc, - .tp_ops = &scc_tp_ops, - .port_ops = &scc_port_ops, - .dma_ops = &scc_dma_ops, - .host_flags = IDE_HFLAG_SINGLE, - .irq_flags = IRQF_SHARED, - .pio_mask = ATA_PIO4, - .chipset = ide_pci, -}; - -/** - * scc_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an SCC PATA controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return init_setup_scc(dev, &scc_chipset); -} - -/** - * scc_remove - pci layer remove entry - * @dev: PCI device - * - * Called by the PCI code when it removes an SCC PATA controller. - */ - -static void scc_remove(struct pci_dev *dev) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host = ports->host; - - ide_host_remove(host); - - iounmap((void*)ports->dma); - iounmap((void*)ports->ctl); - pci_release_selected_regions(dev, (1 << 2) - 1); - memset(ports, 0, sizeof(*ports)); -} - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); - -static struct pci_driver scc_pci_driver = { - .name = "SCC IDE", - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = scc_remove, -}; - -static int __init scc_ide_init(void) -{ - return ide_pci_register_driver(&scc_pci_driver); -} - -static void __exit scc_ide_exit(void) -{ - pci_unregister_driver(&scc_pci_driver); -} - -module_init(scc_ide_init); -module_exit(scc_ide_exit); - -MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); -MODULE_LICENSE("GPL"); From 8844d0f1cb921f70ca09f6b54feeba0b90db072c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 13 Apr 2015 21:24:48 -0700 Subject: [PATCH 004/652] spi: bcm2835: Add GPIOLIB dependency Fix: drivers/spi/spi-bcm2835.c: In function 'chip_match_name': drivers/spi/spi-bcm2835.c:356:21: error: dereferencing pointer to incomplete type drivers/spi/spi-bcm2835.c: In function 'bcm2835_spi_setup': drivers/spi/spi-bcm2835.c:382:2: error: ` implicit declaration of function 'gpiochip_find' drivers/spi/spi-bcm2835.c:387:21: error: dereferencing pointer to incomplete type by adding the now mandatory GPIOLIB dependency. Fixes: a30a555d7435 ("spi: bcm2835: transform native-cs to gpio-cs on first spi_setup") Cc: Martin Sperl Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ab8dfbef6f1b..00cc019ddddf 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -78,6 +78,7 @@ config SPI_ATMEL config SPI_BCM2835 tristate "BCM2835 SPI controller" depends on ARCH_BCM2835 || COMPILE_TEST + depends on GPIOLIB help This selects a driver for the Broadcom BCM2835 SPI master. From 8d7dc9283f399e1fda4e48a1c453f689326d9396 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 14 Apr 2015 19:33:59 -0700 Subject: [PATCH 005/652] rcu: Control grace-period delays directly from value In a misguided attempt to avoid an #ifdef, the use of the gp_init_delay module parameter was conditioned on the corresponding RCU_TORTURE_TEST_SLOW_INIT Kconfig variable, using IS_ENABLED() at the point of use in the code. This meant that the compiler always saw the delay, which meant that RCU_TORTURE_TEST_SLOW_INIT_DELAY had to be unconditionally defined. This in turn caused "make oldconfig" to ask pointless questions about the value of RCU_TORTURE_TEST_SLOW_INIT_DELAY in cases where it was not even used. This commit avoids these pointless questions by defining gp_init_delay under #ifdef. In one branch, gp_init_delay is initialized to RCU_TORTURE_TEST_SLOW_INIT_DELAY and is also a module parameter (thus allowing boot-time modification), and in the other branch gp_init_delay is a const variable initialized by default to zero. This approach also simplifies the code at the delay point by eliminating the IS_DEFINED(). Because gp_init_delay is constant zero in the no-delay case intended for production use, the "gp_init_delay > 0" check causes the delay to become dead code, as desired in this case. In addition, this commit replaces magic constant "10" with the preprocessor variable PER_RCU_NODE_PERIOD, which controls the number of grace periods that are allowed to elapse at full speed before a delay is inserted. Reported-by: Linus Torvalds Signed-off-by: Paul E. McKenney --- kernel/rcu/tree.c | 16 +++++++++------- lib/Kconfig.debug | 1 + 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index 233165da782f..8cf7304b2867 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -162,11 +162,14 @@ static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp); static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO; module_param(kthread_prio, int, 0644); -/* Delay in jiffies for grace-period initialization delays. */ -static int gp_init_delay = IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT) - ? CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY - : 0; +/* Delay in jiffies for grace-period initialization delays, debug only. */ +#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT +static int gp_init_delay = CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY; module_param(gp_init_delay, int, 0644); +#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */ +static const int gp_init_delay; +#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */ +#define PER_RCU_NODE_PERIOD 10 /* Number of grace periods between delays. */ /* * Track the rcutorture test sequence number and the update version @@ -1843,9 +1846,8 @@ static int rcu_gp_init(struct rcu_state *rsp) raw_spin_unlock_irq(&rnp->lock); cond_resched_rcu_qs(); ACCESS_ONCE(rsp->gp_activity) = jiffies; - if (IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT) && - gp_init_delay > 0 && - !(rsp->gpnum % (rcu_num_nodes * 10))) + if (gp_init_delay > 0 && + !(rsp->gpnum % (rcu_num_nodes * PER_RCU_NODE_PERIOD))) schedule_timeout_uninterruptible(gp_init_delay); } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1ad74c0df01f..5f5ff7d7e5eb 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1268,6 +1268,7 @@ config RCU_TORTURE_TEST_SLOW_INIT_DELAY int "How much to slow down RCU grace-period initialization" range 0 5 default 3 + depends on RCU_TORTURE_TEST_SLOW_INIT help This option specifies the number of jiffies to wait between each rcu_node structure initialization. From 145367baa492246cc19d7e859db642e6fed6908e Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Thu, 16 Apr 2015 07:51:26 +0000 Subject: [PATCH 006/652] spi: bcm2835: change timeout of polling driver to 1s The way that the timeout code is written in the polling function the timeout does also trigger when interrupted or rescheduled while in the polling loop. This patch changes the timeout from effectively 20ms (=2 jiffies) to 1 second and removes the time that the transfer really takes out of the computation, as - per design - this is <30us and the jiffie resolution is 10ms so that does not make any difference what so ever. Signed-off-by: Martin Sperl Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index f63864a893c5..37875cf942f7 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -164,13 +164,12 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master, unsigned long xfer_time_us) { struct bcm2835_spi *bs = spi_master_get_devdata(master); - unsigned long timeout = jiffies + - max(4 * xfer_time_us * HZ / 1000000, 2uL); + /* set timeout to 1 second of maximum polling */ + unsigned long timeout = jiffies + HZ; /* enable HW block without interrupts */ bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA); - /* set timeout to 4x the expected time, or 2 jiffies */ /* loop until finished the transfer */ while (bs->rx_len) { /* read from fifo as much as possible */ From f8bb820da4ae863c676156627973a950129559fb Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Thu, 16 Apr 2015 10:54:18 +0800 Subject: [PATCH 007/652] spi: check tx_buf and rx_buf in spi_unmap_msg Some spi device drivers use the same tx_buf and rx_buf repeatly for better performance such as driver/input/touchsreen/ads7846.c, but spi core grab tx_buf /rx_buf of transfer and set them as dummy_tx/dummy_rx once they are NULL. Thus, in the second time the tx_buf/rx_buf will be replaced by dummy_tx/dummy_rx and the data which produced by the last tx or rx may be wrongly sent to the device or handled by the upper level protocol. This patch just keep the orignal value of tx_buf/rx_buf if they are NULL after this transfer processed. Signed-off-by: Robin Gong Signed-off-by: Mark Brown --- drivers/spi/spi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index d5d7d2235163..50910d85df5a 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -583,6 +583,15 @@ static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg) rx_dev = master->dma_rx->device->dev; list_for_each_entry(xfer, &msg->transfers, transfer_list) { + /* + * Restore the original value of tx_buf or rx_buf if they are + * NULL. + */ + if (xfer->tx_buf == master->dummy_tx) + xfer->tx_buf = NULL; + if (xfer->rx_buf == master->dummy_rx) + xfer->rx_buf = NULL; + if (!master->can_dma(master, msg->spi, xfer)) continue; From 0ea001d3b43cc9d387c093ae205c4228cd88a886 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Wed, 15 Apr 2015 13:57:11 +0800 Subject: [PATCH 008/652] ARM: rockchip: disable dapswjdp during suspend Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is not "jtag_trstn". the AP would think this pin is always high, so it can not reset before resume. When system resume, but the dapswjdp is not in a default state, it may Access some illegal address, it cause system crash during resume. Let's disable this jtag function by clear the dapdeviceen bit, it prohibit the dapswjdp to access memory and registers. This bit would be enable in MASKROM, so we need clear it in suspend everytime. Signed-off-by: Chris Zhong Reviewed-by: Doug Anderson Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/pm.c | 7 +++++++ arch/arm/mach-rockchip/pm.h | 4 ++++ 2 files changed, 11 insertions(+) diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index b07d88602073..b0dcbe28f78c 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -83,6 +83,13 @@ static void rk3288_slp_mode_set(int level) SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); + /* + * The dapswjdp can not auto reset before resume, that cause it may + * access some illegal address during resume. Let's disable it before + * suspend, and the MASKROM will enable it back. + */ + regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE); + /* booting address of resuming system is from this register value */ regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR, rk3288_bootram_phy); diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index 03ff31d8282d..3e8d39c0c3d5 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -55,6 +55,10 @@ static inline void rockchip_suspend_init(void) #define SGRF_FAST_BOOT_EN BIT(8) #define SGRF_FAST_BOOT_EN_WRITE BIT(24) +#define RK3288_SGRF_CPU_CON0 (0x40) +#define SGRF_DAPDEVICEEN BIT(0) +#define SGRF_DAPDEVICEEN_WRITE BIT(16) + #define RK3288_CRU_MODE_CON 0x50 #define RK3288_CRU_SEL0_CON 0x60 #define RK3288_CRU_SEL1_CON 0x64 From b403125d3bbf8046c1186e1a49cb17bb5551db14 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Sun, 22 Mar 2015 00:04:51 +0800 Subject: [PATCH 009/652] ARM: rockchip: fix undefined instruction of reset_ctrl_regs Sometimes the debug module may not work well after resume, since it has not been correctly reset when wakeup from suspend. That cause system crash during reusme, and a 'undefined instruction' is displayed on the console. Set the GRF_FORCE_JTAG bit of RK3288_GRF_SOC_CON0 can ensure that debug modul is reset. And we can change the value of RK3288_GRF_SOC_CON0 back when system resume. Signed-off-by: Chris Zhong Tested-by: Caesar Wang Reviewed-by: Douglas Anderson According to discussions, there does not seem a better solution available. Please also see the potential security implication described in the comment inline in the code. Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/pm.c | 26 ++++++++++++++++++++++++++ arch/arm/mach-rockchip/pm.h | 4 ++++ 2 files changed, 30 insertions(+) diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index b0dcbe28f78c..22812fe06460 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base; static phys_addr_t rk3288_bootram_phy; static struct regmap *pmu_regmap; +static struct regmap *grf_regmap; static struct regmap *sgrf_regmap; static u32 rk3288_pmu_pwr_mode_con; +static u32 rk3288_grf_soc_con0; static u32 rk3288_sgrf_soc_con0; static inline u32 rk3288_l2_config(void) @@ -70,11 +72,25 @@ static void rk3288_slp_mode_set(int level) { u32 mode_set, mode_set1; + regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0); + regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0); regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, &rk3288_pmu_pwr_mode_con); + /* + * We need set this bit GRF_FORCE_JTAG here, for the debug module, + * otherwise, it may become inaccessible after resume. + * This creates a potential security issue, as the sdmmc pins may + * accept jtag data for a short time during resume if no card is + * inserted. + * But this is of course also true for the regular boot, before we + * turn of the jtag/sdmmc autodetect. + */ + regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG | + GRF_FORCE_JTAG_WRITE); + /* * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR * PCLK_WDT_GATE - disable WDT during suspend. @@ -135,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void) regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); + + regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 | + GRF_FORCE_JTAG_WRITE); } static int rockchip_lpmode_enter(unsigned long arg) @@ -193,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np) return PTR_ERR(pmu_regmap); } + grf_regmap = syscon_regmap_lookup_by_compatible( + "rockchip,rk3288-grf"); + if (IS_ERR(grf_regmap)) { + pr_err("%s: could not find grf regmap\n", __func__); + return PTR_ERR(pmu_regmap); + } + sram_np = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu-sram"); if (!sram_np) { diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index 3e8d39c0c3d5..f8a747bc1437 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void) #define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44 #define RK3288_PMU_PWRMODE_CON1 0x90 +#define RK3288_GRF_SOC_CON0 0x244 +#define GRF_FORCE_JTAG BIT(12) +#define GRF_FORCE_JTAG_WRITE BIT(28) + #define RK3288_SGRF_SOC_CON0 (0x0000) #define RK3288_SGRF_FAST_BOOT_ADDR (0x0120) #define SGRF_PCLK_WDT_GATE BIT(6) From 2a9fe3ca84afff6259820c4f62e579f41476becc Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 20 Jan 2015 23:47:30 +0100 Subject: [PATCH 010/652] rockchip: make sure timer7 is enabled on rk3288 platforms timer7 supplies the architected timer and thus as has to run when the system clocksource and clockevents drivers are registered. While it should be the responsibility of the bootloader to do this, and there exists a fix in a community u-boot, all u-boot based systems that actually shipped have the mentioned issue. Therefore to not require every developer to update their u-boot, add a snippet for this, enabling the timer early in the kernel. Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/rockchip.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d360ec044b66..b6cf3b449428 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -30,11 +30,30 @@ #include "pm.h" #define RK3288_GRF_SOC_CON0 0x244 +#define RK3288_TIMER6_7_PHYS 0xff810000 static void __init rockchip_timer_init(void) { if (of_machine_is_compatible("rockchip,rk3288")) { struct regmap *grf; + void __iomem *reg_base; + + /* + * Most/all uboot versions for rk3288 don't enable timer7 + * which is needed for the architected timer to work. + * So make sure it is running during early boot. + */ + reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K); + if (reg_base) { + writel(0, reg_base + 0x30); + writel(0xffffffff, reg_base + 0x20); + writel(0xffffffff, reg_base + 0x24); + writel(1, reg_base + 0x30); + dsb(); + iounmap(reg_base); + } else { + pr_err("rockchip: could not map timer7 registers\n"); + } /* * Disable auto jtag/sdmmc switching that causes issues From c57dcb566d3d866a302a1da2e06344bec31d5bcd Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Thu, 2 Apr 2015 08:39:00 +0100 Subject: [PATCH 011/652] efivarfs: Ensure VariableName is NUL-terminated Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by: Ross Lagerwall Acked-by: Matthew Garrett Cc: Jeremy Kerr Cc: Signed-off-by: Matt Fleming --- fs/efivarfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c index ddbce42548c9..acf9a67f6770 100644 --- a/fs/efivarfs/super.c +++ b/fs/efivarfs/super.c @@ -121,7 +121,7 @@ static int efivarfs_callback(efi_char16_t *name16, efi_guid_t vendor, int len, i; int err = -ENOMEM; - entry = kmalloc(sizeof(*entry), GFP_KERNEL); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); if (!entry) return err; From 98b228f55014870092c15d7d168fecac69f2f12a Mon Sep 17 00:00:00 2001 From: Roy Franz Date: Wed, 15 Apr 2015 16:32:24 -0700 Subject: [PATCH 012/652] x86/efi: Store upper bits of command line buffer address in ext_cmd_line_ptr Until now, the EFI stub was only setting the 32 bit cmd_line_ptr in the setup_header structure, so on 64 bit platforms this could be truncated. This patch adds setting the upper bits of the buffer address in ext_cmd_line_ptr. This case was likely never hit, as the allocation for this buffer is done at the lowest available address. Only x86_64 kernels have this problem, as the 1-1 mapping mandated by EFI ensures that all memory is 32 bit addressable on 32 bit platforms. The EFI stub does not support mixed mode, so the 32 bit kernel on 64 bit firmware case does not need to be handled. Signed-off-by: Roy Franz Cc: Signed-off-by: Matt Fleming --- arch/x86/boot/compressed/eboot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 92b9a5f2aed6..5999980206bf 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -1110,6 +1110,8 @@ struct boot_params *make_boot_params(struct efi_config *c) if (!cmdline_ptr) goto fail; hdr->cmd_line_ptr = (unsigned long)cmdline_ptr; + /* Fill in upper bits of command line address, NOP on 32 bit */ + boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32; hdr->ramdisk_image = 0; hdr->ramdisk_size = 0; From 7d0ec8b6f40b356f780b79de63eeafd6b907d68c Mon Sep 17 00:00:00 2001 From: Pelle Nilsson Date: Tue, 14 Apr 2015 15:40:17 +0200 Subject: [PATCH 013/652] spi: bitbang: Make setup_transfer() callback optional Some controller drivers have no need of this callback (spi-altera even causes a NULL pointer dereference because it doesn't register the callback, falsely assuming that it is already optional). Fixes: 30af9b558a56 ("spi/bitbang: Drop empty setup() functions") Signed-off-by: Pelle Nilsson Reviewed-by: Ezequiel Garcia Signed-off-by: Mark Brown --- drivers/spi/spi-bitbang.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 5ef6638d5e8a..840a4984d365 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -180,7 +180,6 @@ int spi_bitbang_setup(struct spi_device *spi) { struct spi_bitbang_cs *cs = spi->controller_state; struct spi_bitbang *bitbang; - int retval; unsigned long flags; bitbang = spi_master_get_devdata(spi->master); @@ -197,9 +196,11 @@ int spi_bitbang_setup(struct spi_device *spi) if (!cs->txrx_word) return -EINVAL; - retval = bitbang->setup_transfer(spi, NULL); - if (retval < 0) - return retval; + if (bitbang->setup_transfer) { + int retval = bitbang->setup_transfer(spi, NULL); + if (retval < 0) + return retval; + } dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); @@ -295,9 +296,11 @@ static int spi_bitbang_transfer_one(struct spi_master *master, /* init (-1) or override (1) transfer params */ if (do_setup != 0) { - status = bitbang->setup_transfer(spi, t); - if (status < 0) - break; + if (bitbang->setup_transfer) { + status = bitbang->setup_transfer(spi, t); + if (status < 0) + break; + } if (do_setup == -1) do_setup = 0; } From 937125aca00e0478c4024afe58bc620a7bbe2a93 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Fri, 17 Apr 2015 17:51:08 +0300 Subject: [PATCH 014/652] iio: adc: spmi-vadc: Fix overflow in output value normalization With 'dx' equal to 0.625V and 15 bit ADC, calculations overflow when difference against GND is ~20% of the ADC range. Fix this. Signed-off-by: Ivan T. Ivanov Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/qcom-spmi-vadc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c index 3211729bcb0b..0c4618b4d515 100644 --- a/drivers/iio/adc/qcom-spmi-vadc.c +++ b/drivers/iio/adc/qcom-spmi-vadc.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -471,11 +472,11 @@ static s32 vadc_calibrate(struct vadc_priv *vadc, const struct vadc_channel_prop *prop, u16 adc_code) { const struct vadc_prescale_ratio *prescale; - s32 voltage; + s64 voltage; voltage = adc_code - vadc->graph[prop->calibration].gnd; voltage *= vadc->graph[prop->calibration].dx; - voltage = voltage / vadc->graph[prop->calibration].dy; + voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy); if (prop->calibration == VADC_CALIB_ABSOLUTE) voltage += vadc->graph[prop->calibration].dx; @@ -487,7 +488,7 @@ static s32 vadc_calibrate(struct vadc_priv *vadc, voltage = voltage * prescale->den; - return voltage / prescale->num; + return div64_s64(voltage, prescale->num); } static int vadc_decimation_from_dt(u32 value) From c2aab3d58b96002555a3e70004f593b043830248 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 14 Apr 2015 14:53:22 -0700 Subject: [PATCH 015/652] iio: light: hid-sensor-prox: Fix modifier Currently in_proximity_(null)_raw is getting presented as raw sysfs attribute. Same with the scan_elements. The modifier doesn't apply to this channel. Signed-off-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-prox.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index 3ecf79ed08ac..88f21bbe947c 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -43,8 +43,6 @@ struct prox_state { static const struct iio_chan_spec prox_channels[] = { { .type = IIO_PROXIMITY, - .modified = 1, - .channel2 = IIO_NO_MOD, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | From 964e2255f1d73fc0136bc206a78a1f86bdad72a7 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 14 Apr 2015 14:54:18 -0700 Subject: [PATCH 016/652] iio: pressure: hid-sensor-press: Fix modifier Fix "null" in the raw attribute and scan elements. Signed-off-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hid-sensor-press.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index 1af314926ebd..476a7d03d2ce 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -47,8 +47,6 @@ struct press_state { static const struct iio_chan_spec press_channels[] = { { .type = IIO_PRESSURE, - .modified = 1, - .channel2 = IIO_NO_MOD, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | From 3960d2c0c4aafe98da47a4a2eb64dfa8e88d8df5 Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:47 +0200 Subject: [PATCH 017/652] iio: adc: xilinx: Fix register addresses Define the register addresses for MIN_VCCPINT, MIN_VCCPAUX, MIN_VCCO_DDR correctly. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h index c7487e8d7f80..54adc5087210 100644 --- a/drivers/iio/adc/xilinx-xadc.h +++ b/drivers/iio/adc/xilinx-xadc.h @@ -145,9 +145,9 @@ static inline int xadc_write_adc_reg(struct xadc *xadc, unsigned int reg, #define XADC_REG_MAX_VCCPINT 0x28 #define XADC_REG_MAX_VCCPAUX 0x29 #define XADC_REG_MAX_VCCO_DDR 0x2a -#define XADC_REG_MIN_VCCPINT 0x2b -#define XADC_REG_MIN_VCCPAUX 0x2c -#define XADC_REG_MIN_VCCO_DDR 0x2d +#define XADC_REG_MIN_VCCPINT 0x2c +#define XADC_REG_MIN_VCCPAUX 0x2d +#define XADC_REG_MIN_VCCO_DDR 0x2e #define XADC_REG_CONF0 0x40 #define XADC_REG_CONF1 0x41 From d6c96c42283601e311a7a1a3d7e51cde9d7fdb6e Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:48 +0200 Subject: [PATCH 018/652] iio: adc: xilinx: Fix "vccaux" channel .address For the "vccaux" channel, read the VCCAUX register, not VCCINT. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index a221f7329b79..0ad7b502c593 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -1008,7 +1008,7 @@ static const struct iio_event_spec xadc_voltage_events[] = { static const struct iio_chan_spec xadc_channels[] = { XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP), XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true), - XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCINT, "vccaux", true), + XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true), XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true), XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true), XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true), From 00db4e52f4541965f7fda225eb458a75f892017b Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:49 +0200 Subject: [PATCH 019/652] iio: adc: xilinx: Fix VREFP scale The scaling factor for VREFP is 3.0/4096, not 1.0/4096; fix this to get correct readings. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 0ad7b502c593..6fa629b3c168 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -856,6 +856,7 @@ static int xadc_read_raw(struct iio_dev *indio_dev, switch (chan->address) { case XADC_REG_VCCINT: case XADC_REG_VCCAUX: + case XADC_REG_VREFP: case XADC_REG_VCCBRAM: case XADC_REG_VCCPINT: case XADC_REG_VCCPAUX: From 97ffae1d30c3f6ceee67d5b0d3e540c08c13c744 Mon Sep 17 00:00:00 2001 From: Thomas Betker Date: Wed, 15 Apr 2015 21:11:50 +0200 Subject: [PATCH 020/652] iio: adc: xilinx: Fix VREFN sign The VREFN channel is bipolar, not unipolar. Small negative values do occur (e.g., -1mV), and unsigned conversion maps them incorrectly to large positive values (about +1V), so fix this. Signed-off-by: Thomas Betker Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 6fa629b3c168..ce93bd8e3f68 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -997,7 +997,7 @@ static const struct iio_event_spec xadc_voltage_events[] = { .num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \ .scan_index = (_scan_index), \ .scan_type = { \ - .sign = 'u', \ + .sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \ .realbits = 12, \ .storagebits = 16, \ .shift = 4, \ From d44c3fe68cc7e435ebc06d5b6ac260a5c1b495f8 Mon Sep 17 00:00:00 2001 From: Avri Altman Date: Sat, 18 Apr 2015 22:16:42 +0300 Subject: [PATCH 021/652] iwlwifi: mvm: fix Tx Power firmware API The firmware doesn't relate the scan to a vif. The scan is run by a separate entity called auxiliary MAC (aka AUX MAC). This AUX MAC needs to get Tx power limitations that are not applied on a specific vif, but on the device as a whole. This can be implemented by using the minimum of all the values set by the user for all the MACs. But then we need to ignore the limitations that come from the AP or regulatory for a specific vif: a specific vif might have regulatory limitations because of the channel is works on. This limit is irrelevant for the AUX MAC. Use the new API from mac80211: the user_power_level in bss_conf to achieve this. Firmware -13.ucode has already moved to this API. Change-Id: Ifba83660f378e91b93bd46d29fe8ba35a7c168a4 Signed-off-by: Avri Altman Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fw-file.h | 2 ++ .../net/wireless/iwlwifi/mvm/fw-api-power.h | 34 +++++++++++++++++++ drivers/net/wireless/iwlwifi/mvm/fw-api.h | 13 ------- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 24 +++++++++++-- 4 files changed, 58 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index bfdf3faa6c47..62db2e5e45eb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -244,6 +244,7 @@ enum iwl_ucode_tlv_flag { * longer than the passive one, which is essential for fragmented scan. * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR + * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power. * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command, * regardless of the band or the number of the probes. FW will calculate * the actual dwell time. @@ -260,6 +261,7 @@ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8), IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = BIT(9), IWL_UCODE_TLV_API_HDC_PHASE_0 = BIT(10), + IWL_UCODE_TLV_API_TX_POWER_DEV = BIT(11), IWL_UCODE_TLV_API_BASIC_DWELL = BIT(13), IWL_UCODE_TLV_API_SCD_CFG = BIT(15), IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = BIT(16), diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 4fc0938b3fb6..b1baa33cc19b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -297,6 +297,40 @@ struct iwl_uapsd_misbehaving_ap_notif { u8 reserved[3]; } __packed; +/** + * struct iwl_reduce_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @flags: (reserved for future implementation) + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in dBms. + */ +struct iwl_reduce_tx_power_cmd { + u8 flags; + u8 mac_context_id; + __le16 pwr_restriction; +} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ + +/** + * struct iwl_dev_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @set_mode: 0 - MAC tx power, 1 - device tx power + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in 1/8 dBms. + * @dev_24: device TX power restriction in 1/8 dBms + * @dev_52_low: device TX power restriction upper band - low + * @dev_52_high: device TX power restriction upper band - high + */ +struct iwl_dev_tx_power_cmd { + __le32 set_mode; + __le32 mac_context_id; + __le16 pwr_restriction; + __le16 dev_24; + __le16 dev_52_low; + __le16 dev_52_high; +} __packed; /* TX_REDUCED_POWER_API_S_VER_2 */ + +#define IWL_DEV_MAX_TX_POWER 0x7FFF + /** * struct iwl_beacon_filter_cmd * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index aab68cbae754..01b1da6ad359 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -281,19 +281,6 @@ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; -/** - * struct iwl_reduce_tx_power_cmd - TX power reduction command - * REDUCE_TX_POWER_CMD = 0x9f - * @flags: (reserved for future implementation) - * @mac_context_id: id of the mac ctx for which we are reducing TX power. - * @pwr_restriction: TX power restriction in dBms. - */ -struct iwl_reduce_tx_power_cmd { - u8 flags; - u8 mac_context_id; - __le16 pwr_restriction; -} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ - /* * Calibration control struct. * Sent as part of the phy configuration command. diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 84555170b6f7..7c2d5ace0eb3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1471,8 +1471,8 @@ static struct iwl_mvm_phy_ctxt *iwl_mvm_get_free_phy_ctxt(struct iwl_mvm *mvm) return NULL; } -static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, - s8 tx_power) +static int iwl_mvm_set_tx_power_old(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, s8 tx_power) { /* FW is in charge of regulatory enforcement */ struct iwl_reduce_tx_power_cmd reduce_txpwr_cmd = { @@ -1485,6 +1485,26 @@ static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, &reduce_txpwr_cmd); } +static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + s16 tx_power) +{ + struct iwl_dev_tx_power_cmd cmd = { + .set_mode = 0, + .mac_context_id = + cpu_to_le32(iwl_mvm_vif_from_mac80211(vif)->id), + .pwr_restriction = cpu_to_le16(8 * tx_power), + }; + + if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_TX_POWER_DEV)) + return iwl_mvm_set_tx_power_old(mvm, vif, tx_power); + + if (tx_power == IWL_DEFAULT_MAX_TX_POWER) + cmd.pwr_restriction = cpu_to_le16(IWL_DEV_MAX_TX_POWER); + + return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, + sizeof(cmd), &cmd); +} + static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { From 145d90b6b3a3f00d8b66d0e118b4995b64b74fef Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 13 Apr 2015 12:05:48 +0300 Subject: [PATCH 022/652] iwlwifi: mvm: don't stop the FW monitor too early When the delay paramatere is provided, we need to stop the collection only after the delay has elapsed. Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw.c | 9 --------- drivers/net/wireless/iwlwifi/mvm/ops.c | 10 ++++++++++ 2 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index bc5eac4960e1..9c28fe72fd74 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -494,15 +494,6 @@ int iwl_mvm_fw_dbg_collect_desc(struct iwl_mvm *mvm, mvm->fw_dump_desc = desc; - /* stop recording */ - if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { - iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); - } else { - iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); - /* wait before we collect the data till the DBGC stop */ - udelay(100); - } - queue_delayed_work(system_wq, &mvm->fw_dump_wk, delay); return 0; diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index a08b03d58d4b..1c66297d82c0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -865,6 +865,16 @@ static void iwl_mvm_fw_error_dump_wk(struct work_struct *work) return; mutex_lock(&mvm->mutex); + + /* stop recording */ + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + } else { + iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); + /* wait before we collect the data till the DBGC stop */ + udelay(100); + } + iwl_mvm_fw_error_dump(mvm); /* start recording again if the firmware is not crashed */ From 1083fd7391e989be52022f0f338e9dadc048b063 Mon Sep 17 00:00:00 2001 From: Avraham Stern Date: Tue, 31 Mar 2015 16:14:41 +0300 Subject: [PATCH 023/652] iwlwifi: mvm: fix scan iteration complete notification handling Scan iteration complete notification handling uses the wrong FW API version (version 2 instead of version 3). Fix that by removing version 2 API which is no longer used, and using only the updated version. Signed-off-by: Avraham Stern Reviewed-by: David Spinadel Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- .../net/wireless/iwlwifi/mvm/fw-api-scan.h | 44 +------------------ drivers/net/wireless/iwlwifi/mvm/scan.c | 2 +- 2 files changed, 3 insertions(+), 43 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 4f81dcf57a73..d6cced47d561 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -122,46 +122,6 @@ enum iwl_scan_complete_status { SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C, }; -/** - * struct iwl_scan_results_notif - scan results for one channel - * ( SCAN_RESULTS_NOTIFICATION = 0x83 ) - * @channel: which channel the results are from - * @band: 0 for 5.2 GHz, 1 for 2.4 GHz - * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request - * @num_probe_not_sent: # of request that weren't sent due to not enough time - * @duration: duration spent in channel, in usecs - * @statistics: statistics gathered for this channel - */ -struct iwl_scan_results_notif { - u8 channel; - u8 band; - u8 probe_status; - u8 num_probe_not_sent; - __le32 duration; - __le32 statistics[SCAN_RESULTS_STATISTICS]; -} __packed; /* SCAN_RESULT_NTF_API_S_VER_2 */ - -/** - * struct iwl_scan_complete_notif - notifies end of scanning (all channels) - * ( SCAN_COMPLETE_NOTIFICATION = 0x84 ) - * @scanned_channels: number of channels scanned (and number of valid results) - * @status: one of SCAN_COMP_STATUS_* - * @bt_status: BT on/off status - * @last_channel: last channel that was scanned - * @tsf_low: TSF timer (lower half) in usecs - * @tsf_high: TSF timer (higher half) in usecs - * @results: array of scan results, only "scanned_channels" of them are valid - */ -struct iwl_scan_complete_notif { - u8 scanned_channels; - u8 status; - u8 bt_status; - u8 last_channel; - __le32 tsf_low; - __le32 tsf_high; - struct iwl_scan_results_notif results[]; -} __packed; /* SCAN_COMPLETE_NTF_API_S_VER_2 */ - /* scan offload */ #define IWL_SCAN_MAX_BLACKLIST_LEN 64 #define IWL_SCAN_SHORT_BLACKLIST_LEN 16 @@ -554,7 +514,7 @@ struct iwl_scan_req_unified_lmac { } __packed; /** - * struct iwl_lmac_scan_results_notif - scan results for one channel - + * struct iwl_scan_results_notif - scan results for one channel - * SCAN_RESULT_NTF_API_S_VER_3 * @channel: which channel the results are from * @band: 0 for 5.2 GHz, 1 for 2.4 GHz @@ -562,7 +522,7 @@ struct iwl_scan_req_unified_lmac { * @num_probe_not_sent: # of request that weren't sent due to not enough time * @duration: duration spent in channel, in usecs */ -struct iwl_lmac_scan_results_notif { +struct iwl_scan_results_notif { u8 channel; u8 band; u8 probe_status; diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 74e1c86289dc..1075a213bd6a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -319,7 +319,7 @@ int iwl_mvm_rx_scan_offload_iter_complete_notif(struct iwl_mvm *mvm, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scan_complete_notif *notif = (void *)pkt->data; + struct iwl_lmac_scan_complete_notif *notif = (void *)pkt->data; IWL_DEBUG_SCAN(mvm, "Scan offload iteration complete: status=0x%x scanned channels=%d\n", From 8047cc0c584844817fbf3bf57cb18c1f762a7136 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Thu, 26 Mar 2015 13:15:03 +0200 Subject: [PATCH 024/652] iwlwifi: mvm: Avoid signal based decisions if ave beacon RSSI is 0 If for some reason statistics notification received from the firmware reports 0 in average beacon RSSI value, then skip it and avoid signal based decisions. Signed-off-by: Alexander Bondar Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/rx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 78ec7db64ba5..d6314ddf57b5 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -478,6 +478,11 @@ static void iwl_mvm_stat_iterator(void *_data, u8 *mac, if (vif->type != NL80211_IFTYPE_STATION) return; + if (sig == 0) { + IWL_DEBUG_RX(mvm, "RSSI is 0 - skip signal based decision\n"); + return; + } + mvmvif->bf_data.ave_beacon_signal = sig; /* BT Coex */ From 553452e5ffc0ed13214a287549627d02d9d7fbdc Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Thu, 16 Apr 2015 17:21:12 +0300 Subject: [PATCH 025/652] iwlwifi: pcie: prevent using unmapped memory in fw monitor In the case of a DMA mapping error on the last iteration of the loop of the allocation of memory of the FW monitor we indeed free the pages, but don't NULL out the page variable thus allowing for the possibility of setting the FW monitor variables with invalid data to use. Fixes: c2d202017da1 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by: Liad Kaufman Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 2de8fbfe4edf..6debb0c9111a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -5,8 +5,8 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2007 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -31,8 +31,8 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2005 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -104,7 +104,7 @@ static void iwl_pcie_free_fw_monitor(struct iwl_trans *trans) static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct page *page; + struct page *page = NULL; dma_addr_t phys; u32 size; u8 power; @@ -131,6 +131,7 @@ static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) DMA_FROM_DEVICE); if (dma_mapping_error(trans->dev, phys)) { __free_pages(page, order); + page = NULL; continue; } IWL_INFO(trans, From 94d4b4765b7ddb8478b0d57663cf7a08e2263bbf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 23 Nov 2012 19:19:07 +0100 Subject: [PATCH 026/652] x86/mm: Clean up types in xlate_dev_mem_ptr() Pavel Machek reported the following compiler warning on x86/32 CONFIG_HIGHMEM64G=y builds: arch/x86/mm/ioremap.c:344:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Clean up the types in this function by using a single natural type for internal calculations (unsigned long), to make it more apparent what's happening, and also to remove fragile casts. Reported-by: Pavel Machek Cc: jgross@suse.com Cc: roland@purestorage.com Link: http://lkml.kernel.org/r/20150416080440.GA507@amd Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index fdf617c00e2f..4bf037b20f47 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -332,18 +332,20 @@ EXPORT_SYMBOL(iounmap); */ void *xlate_dev_mem_ptr(phys_addr_t phys) { - void *addr; - unsigned long start = phys & PAGE_MASK; + unsigned long start = phys & PAGE_MASK; + unsigned long offset = phys & ~PAGE_MASK; + unsigned long vaddr; /* If page is RAM, we can use __va. Otherwise ioremap and unmap. */ if (page_is_ram(start >> PAGE_SHIFT)) return __va(phys); - addr = (void __force *)ioremap_cache(start, PAGE_SIZE); - if (addr) - addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK)); + vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE); + /* Only add the offset on success and return NULL if the ioremap() failed: */ + if (vaddr) + vaddr += offset; - return addr; + return (void *)vaddr; } void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr) From 5eb8f4d74204864d8a4154772206ad747274d12d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 Apr 2015 14:56:51 +0200 Subject: [PATCH 027/652] mac80211: don't warn when stopping VLAN with stations Stations assigned to an AP_VLAN type interface are flushed when the interface is stopped, but then we warn about it. Suppress the warning since there's nothing else that would ensure those stations are already removed at this point. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index b4ac596a7cb7..bab5c63c0bad 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -819,13 +819,15 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * (because if we remove a STA after ops->remove_interface() * the driver will have removed the vif info already!) * - * This is relevant only in WDS mode, in all other modes we've - * already removed all stations when disconnecting or similar, - * so warn otherwise. + * In WDS mode a station must exist here and be flushed, for + * AP_VLANs stations may exist since there's nothing else that + * would have removed them, but in other modes there shouldn't + * be any stations. */ flushed = sta_info_flush(sdata); - WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || - (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1)); + WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP_VLAN && + ((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || + (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1))); /* don't count this interface for promisc/allmulti while it is down */ if (sdata->flags & IEEE80211_SDATA_ALLMULTI) From e0e2674b92056c24c69940d5f405ea4aef5e4010 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 20 Apr 2015 14:41:05 +0100 Subject: [PATCH 028/652] ata: ahci_st: fixup layering violations / drvdata errors Brian noticed while working on another SATA driver that uses libahci_platform, an error in this driver; it tries to the the driver data for its device, while libata also thinks it can set the driver data. See: ahci_platform_init_host() -> ata_host_alloc_pinfo() -> ata_host_alloc() -> dev_set_drvdata() So instead of sticking the IP-specific platform data into drvdata, let's use the plat_data variable that is reserved for this use. Addtionally plat_data isn't set until ahci_platform_init_host() has been called further down in probe(). So re-work the st_ahci_probe_resets and st_ahci_deassert_resets functions to take ahci_host_priv *hpriv as a parameter. Signed-off-by: Peter Griffin Suggested-by: Brian Norris Cc: Srinivas Kandagatla Cc: Maxime Coquelin Cc: Patrice Chotard Signed-off-by: Tejun Heo --- drivers/ata/ahci_st.c | 49 +++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 25 deletions(-) diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c index ea0ff005b86c..8ff428fe8e0f 100644 --- a/drivers/ata/ahci_st.c +++ b/drivers/ata/ahci_st.c @@ -37,7 +37,6 @@ struct st_ahci_drv_data { struct reset_control *pwr; struct reset_control *sw_rst; struct reset_control *pwr_rst; - struct ahci_host_priv *hpriv; }; static void st_ahci_configure_oob(void __iomem *mmio) @@ -55,9 +54,10 @@ static void st_ahci_configure_oob(void __iomem *mmio) writel(new_val, mmio + ST_AHCI_OOBR); } -static int st_ahci_deassert_resets(struct device *dev) +static int st_ahci_deassert_resets(struct ahci_host_priv *hpriv, + struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); + struct st_ahci_drv_data *drv_data = hpriv->plat_data; int err; if (drv_data->pwr) { @@ -90,8 +90,8 @@ static int st_ahci_deassert_resets(struct device *dev) static void st_ahci_host_stop(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; struct device *dev = host->dev; - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); int err; if (drv_data->pwr) { @@ -103,29 +103,30 @@ static void st_ahci_host_stop(struct ata_host *host) ahci_platform_disable_resources(hpriv); } -static int st_ahci_probe_resets(struct platform_device *pdev) +static int st_ahci_probe_resets(struct ahci_host_priv *hpriv, + struct device *dev) { - struct st_ahci_drv_data *drv_data = platform_get_drvdata(pdev); + struct st_ahci_drv_data *drv_data = hpriv->plat_data; - drv_data->pwr = devm_reset_control_get(&pdev->dev, "pwr-dwn"); + drv_data->pwr = devm_reset_control_get(dev, "pwr-dwn"); if (IS_ERR(drv_data->pwr)) { - dev_info(&pdev->dev, "power reset control not defined\n"); + dev_info(dev, "power reset control not defined\n"); drv_data->pwr = NULL; } - drv_data->sw_rst = devm_reset_control_get(&pdev->dev, "sw-rst"); + drv_data->sw_rst = devm_reset_control_get(dev, "sw-rst"); if (IS_ERR(drv_data->sw_rst)) { - dev_info(&pdev->dev, "soft reset control not defined\n"); + dev_info(dev, "soft reset control not defined\n"); drv_data->sw_rst = NULL; } - drv_data->pwr_rst = devm_reset_control_get(&pdev->dev, "pwr-rst"); + drv_data->pwr_rst = devm_reset_control_get(dev, "pwr-rst"); if (IS_ERR(drv_data->pwr_rst)) { - dev_dbg(&pdev->dev, "power soft reset control not defined\n"); + dev_dbg(dev, "power soft reset control not defined\n"); drv_data->pwr_rst = NULL; } - return st_ahci_deassert_resets(&pdev->dev); + return st_ahci_deassert_resets(hpriv, dev); } static struct ata_port_operations st_ahci_port_ops = { @@ -154,15 +155,12 @@ static int st_ahci_probe(struct platform_device *pdev) if (!drv_data) return -ENOMEM; - platform_set_drvdata(pdev, drv_data); - hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + hpriv->plat_data = drv_data; - drv_data->hpriv = hpriv; - - err = st_ahci_probe_resets(pdev); + err = st_ahci_probe_resets(hpriv, &pdev->dev); if (err) return err; @@ -170,7 +168,7 @@ static int st_ahci_probe(struct platform_device *pdev) if (err) return err; - st_ahci_configure_oob(drv_data->hpriv->mmio); + st_ahci_configure_oob(hpriv->mmio); err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, &ahci_platform_sht); @@ -185,8 +183,9 @@ static int st_ahci_probe(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int st_ahci_suspend(struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = drv_data->hpriv; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; int err; err = ahci_platform_suspend_host(dev); @@ -208,21 +207,21 @@ static int st_ahci_suspend(struct device *dev) static int st_ahci_resume(struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = drv_data->hpriv; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; int err; err = ahci_platform_enable_resources(hpriv); if (err) return err; - err = st_ahci_deassert_resets(dev); + err = st_ahci_deassert_resets(hpriv, dev); if (err) { ahci_platform_disable_resources(hpriv); return err; } - st_ahci_configure_oob(drv_data->hpriv->mmio); + st_ahci_configure_oob(hpriv->mmio); return ahci_platform_resume_host(dev); } From 3b6e042188994466ec257b71296b5f85b894dcd9 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 21 Apr 2015 17:26:23 +0200 Subject: [PATCH 029/652] perf/x86/intel: Add cpu_(prepare|starting|dying) for core_pmu The core_pmu does not define cpu_* callbacks, which handles allocation of 'struct cpu_hw_events::shared_regs' data, initialization of debug store and PMU_FL_EXCL_CNTRS counters. While this probably won't happen on bare metal, virtual CPU can define x86_pmu.extra_regs together with PMU version 1 and thus be using core_pmu -> using shared_regs data without it being allocated. That could could leave to following panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] _spin_lock_irqsave+0x1f/0x40 SNIP [] __intel_shared_reg_get_constraints+0x69/0x1e0 [] intel_get_event_constraints+0x9b/0x180 [] x86_schedule_events+0x75/0x1d0 [] ? check_preempt_curr+0x7c/0x90 [] ? try_to_wake_up+0x24e/0x3e0 [] ? default_wake_function+0x12/0x20 [] ? autoremove_wake_function+0x16/0x40 [] ? __wake_up_common+0x59/0x90 [] ? __d_lookup+0xa7/0x150 [] ? do_lookup+0x9f/0x230 [] ? dput+0x9a/0x150 [] ? path_to_nameidata+0x25/0x60 [] ? __link_path_walk+0x7da/0x1000 [] ? x86_pmu_add+0xb9/0x170 [] x86_pmu_commit_txn+0x67/0xc0 [] ? mntput_no_expire+0x30/0x110 [] ? path_put+0x31/0x40 [] ? current_fs_time+0x27/0x30 [] ? mem_cgroup_get_reclaim_stat_from_page+0x20/0x70 [] group_sched_in+0x13a/0x170 [] ? sched_clock+0x9/0x10 [] ctx_sched_in+0x2e8/0x330 [] perf_event_sched_in+0x6b/0xb0 [] perf_event_context_sched_in+0x76/0xc0 [] perf_event_comm+0x1bb/0x2e0 [] set_task_comm+0x69/0x80 [] setup_new_exec+0xe1/0x2e0 [] load_elf_binary+0x3ce/0x1ab0 Adding cpu_(prepare|starting|dying) for core_pmu to have shared_regs data allocated for core_pmu. AFAICS there's no harm to initialize debug store and PMU_FL_EXCL_CNTRS either for core_pmu. Signed-off-by: Jiri Olsa Acked-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20150421152623.GC13169@krava.redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel.c | 66 +++++++++++++++----------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 219d3fb423a1..960e85de13fb 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -2533,34 +2533,6 @@ ssize_t intel_event_sysfs_show(char *page, u64 config) return x86_event_sysfs_show(page, config, event); } -static __initconst const struct x86_pmu core_pmu = { - .name = "core", - .handle_irq = x86_pmu_handle_irq, - .disable_all = x86_pmu_disable_all, - .enable_all = core_pmu_enable_all, - .enable = core_pmu_enable_event, - .disable = x86_pmu_disable_event, - .hw_config = x86_pmu_hw_config, - .schedule_events = x86_schedule_events, - .eventsel = MSR_ARCH_PERFMON_EVENTSEL0, - .perfctr = MSR_ARCH_PERFMON_PERFCTR0, - .event_map = intel_pmu_event_map, - .max_events = ARRAY_SIZE(intel_perfmon_event_map), - .apic = 1, - /* - * Intel PMCs cannot be accessed sanely above 32 bit width, - * so we install an artificial 1<<31 period regardless of - * the generic event period: - */ - .max_period = (1ULL << 31) - 1, - .get_event_constraints = intel_get_event_constraints, - .put_event_constraints = intel_put_event_constraints, - .event_constraints = intel_core_event_constraints, - .guest_get_msrs = core_guest_get_msrs, - .format_attrs = intel_arch_formats_attr, - .events_sysfs_show = intel_event_sysfs_show, -}; - struct intel_shared_regs *allocate_shared_regs(int cpu) { struct intel_shared_regs *regs; @@ -2743,6 +2715,44 @@ static struct attribute *intel_arch3_formats_attr[] = { NULL, }; +static __initconst const struct x86_pmu core_pmu = { + .name = "core", + .handle_irq = x86_pmu_handle_irq, + .disable_all = x86_pmu_disable_all, + .enable_all = core_pmu_enable_all, + .enable = core_pmu_enable_event, + .disable = x86_pmu_disable_event, + .hw_config = x86_pmu_hw_config, + .schedule_events = x86_schedule_events, + .eventsel = MSR_ARCH_PERFMON_EVENTSEL0, + .perfctr = MSR_ARCH_PERFMON_PERFCTR0, + .event_map = intel_pmu_event_map, + .max_events = ARRAY_SIZE(intel_perfmon_event_map), + .apic = 1, + /* + * Intel PMCs cannot be accessed sanely above 32-bit width, + * so we install an artificial 1<<31 period regardless of + * the generic event period: + */ + .max_period = (1ULL<<31) - 1, + .get_event_constraints = intel_get_event_constraints, + .put_event_constraints = intel_put_event_constraints, + .event_constraints = intel_core_event_constraints, + .guest_get_msrs = core_guest_get_msrs, + .format_attrs = intel_arch_formats_attr, + .events_sysfs_show = intel_event_sysfs_show, + + /* + * Virtual (or funny metal) CPU can define x86_pmu.extra_regs + * together with PMU version 1 and thus be using core_pmu with + * shared_regs. We need following callbacks here to allocate + * it properly. + */ + .cpu_prepare = intel_pmu_cpu_prepare, + .cpu_starting = intel_pmu_cpu_starting, + .cpu_dying = intel_pmu_cpu_dying, +}; + static __initconst const struct x86_pmu intel_pmu = { .name = "Intel", .handle_irq = intel_pmu_handle_irq, From 80bcffb376a6890dd7452b12c1ba032f8f24fef6 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Mon, 20 Apr 2015 15:34:07 -0700 Subject: [PATCH 030/652] perf/x86/intel/uncore: Add support for Intel Haswell ULT (lower power Mobile Processor) IMC uncore PMUs This uncore is the same as the Haswell desktop part but uses a different PCI ID. Signed-off-by: Sonny Rao Cc: Arnaldo Carvalho de Melo Cc: Bjorn Helgaas Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1429569247-16697-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c index 3001015b755c..ca75e70865ef 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c @@ -1,6 +1,9 @@ /* Nehalem/SandBridge/Haswell uncore support */ #include "perf_event_intel_uncore.h" +/* Uncore IMC PCI Id */ +#define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04 + /* SNB event control */ #define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff #define SNB_UNC_CTL_UMASK_MASK 0x0000ff00 @@ -472,6 +475,10 @@ static const struct pci_device_id hsw_uncore_pci_ids[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC), .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, { /* end: all zeroes */ }, }; @@ -502,6 +509,7 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = { IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver), /* 3rd Gen Core processor */ IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */ IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core Processor */ + IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core ULT Mobile Processor */ { /* end marker */ } }; From 0140e6141e4f1d4b15fb469e6912b0e71b7d1cc2 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 21 Apr 2015 12:33:11 -0700 Subject: [PATCH 031/652] perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver This keeps all the related PCI IDs together in the driver where they are used. Signed-off-by: Sonny Rao Acked-by: Bjorn Helgaas Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1429644791-25724-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c | 6 +++++- include/linux/pci_ids.h | 4 ---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c index ca75e70865ef..4562e9e22c60 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c @@ -1,7 +1,11 @@ /* Nehalem/SandBridge/Haswell uncore support */ #include "perf_event_intel_uncore.h" -/* Uncore IMC PCI Id */ +/* Uncore IMC PCI IDs */ +#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 +#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 +#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150 +#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04 /* SNB event control */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index e63c02a93f6b..a59385852233 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2539,10 +2539,6 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 -#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 -#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 -#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150 -#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 #define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 #define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 From 575bec53181526ed01c0936ec008e1b70f8f5f31 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 22 Apr 2015 16:28:20 +0200 Subject: [PATCH 032/652] spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1 On CPM2, the SPI parameter RAM is dynamically allocated in the dualport RAM whereas in CPM1, it is statically allocated to a default address with capability to relocate it somewhere else via the use of CPM micropatch. The address of the parameter RAM is given by the boot loader and expected to be mapped via devm_ioremap_resource() In the current implementation, in function fsl_spi_cpm_get_pram() there is a confusion between the SPI_BASE register and the base of the SPI parameter RAM. Fortunatly, it is working properly with MPC866 and MPC885 because they do set SPI_BASE, but on MPC860 and other old MPC8xx that doesn't set SPI_BASE, pram_ofs is not properly set. Also, the parameter RAM is not properly mapped with devm_ioremap_resource() as it should but still gets accessible by chance through the full RAM which is mapped from somewhere else. This patch applies to the SPI driver the same principle as for the CPM UART: when the CPM is of type CPM1, we simply do an devm_ioremap_resource() of the area provided via the device tree. Signed-off-by: Christophe Leroy Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-cpm.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 9c46a3058743..6f466ab1201a 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "spi-fsl-cpm.h" #include "spi-fsl-lib.h" @@ -269,17 +270,6 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) if (mspi->flags & SPI_CPM2) { pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); out_be16(spi_base, pram_ofs); - } else { - struct spi_pram __iomem *pram = spi_base; - u16 rpbase = in_be16(&pram->rpbase); - - /* Microcode relocation patch applied? */ - if (rpbase) { - pram_ofs = rpbase; - } else { - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - out_be16(spi_base, pram_ofs); - } } iounmap(spi_base); @@ -292,7 +282,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) struct device_node *np = dev->of_node; const u32 *iprop; int size; - unsigned long pram_ofs; unsigned long bds_ofs; if (!(mspi->flags & SPI_CPM_MODE)) @@ -319,8 +308,21 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) } } - pram_ofs = fsl_spi_cpm_get_pram(mspi); - if (IS_ERR_VALUE(pram_ofs)) { + if (mspi->flags & SPI_CPM1) { + struct resource *res; + + res = platform_get_resource(to_platform_device(dev), + IORESOURCE_MEM, 1); + mspi->pram = devm_ioremap_resource(dev, res); + } else { + unsigned long pram_ofs = fsl_spi_cpm_get_pram(mspi); + + if (IS_ERR_VALUE(pram_ofs)) + mspi->pram = NULL; + else + mspi->pram = cpm_muram_addr(pram_ofs); + } + if (mspi->pram == NULL) { dev_err(dev, "can't allocate spi parameter ram\n"); goto err_pram; } @@ -346,8 +348,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) goto err_dummy_rx; } - mspi->pram = cpm_muram_addr(pram_ofs); - mspi->tx_bd = cpm_muram_addr(bds_ofs); mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd)); @@ -375,7 +375,8 @@ err_dummy_rx: err_dummy_tx: cpm_muram_free(bds_ofs); err_bds: - cpm_muram_free(pram_ofs); + if (!(mspi->flags & SPI_CPM1)) + cpm_muram_free(cpm_muram_offset(mspi->pram)); err_pram: fsl_spi_free_dummy_rx(); return -ENOMEM; From a7d2bf25a4837e6514a2747380fd4539b63ee20c Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 14 Apr 2015 17:35:12 +0300 Subject: [PATCH 033/652] HID: i2c-hid: Do not fail probing if gpiolib is not enabled Using GPIOs and gpiolib is optional. If the kernel is compiled without GPIO support the driver should not fail if it finds the interrupt using normal methods. However, commit a485923efbb8 ("HID: i2c-hid: Add support for ACPI GPIO interrupts") did not take into account that acpi_dev_add_driver_gpios() returns -ENXIO when !CONFIG_GPIOLIB. Fix this by checking the return value against -ENXIO and 0 and only in that case fail the probe. Reported-by: Gabriele Mazzotta Signed-off-by: Mika Westerberg Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index ab4dd952b6ba..92d6cdf02460 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -862,6 +862,7 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, union acpi_object *obj; struct acpi_device *adev; acpi_handle handle; + int ret; handle = ACPI_HANDLE(&client->dev); if (!handle || acpi_bus_get_device(handle, &adev)) @@ -877,7 +878,9 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, pdata->hid_descriptor_address = obj->integer.value; ACPI_FREE(obj); - return acpi_dev_add_driver_gpios(adev, i2c_hid_acpi_gpios); + /* GPIOs are optional */ + ret = acpi_dev_add_driver_gpios(adev, i2c_hid_acpi_gpios); + return ret < 0 && ret != -ENXIO ? ret : 0; } static const struct acpi_device_id i2c_hid_acpi_match[] = { From 60f4b626d5b5c5724b010200a8c2ff3169f6f4db Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2015 14:02:30 +0200 Subject: [PATCH 034/652] mac80211: fix rhashtable conversion My conversion of the mac80211 station hash table to rhashtable completely broke the lookup in sta_info_get() as it no longer took into account the virtual interface. Fix that. Fixes: 7bedd0cfad4e1 ("mac80211: use rhashtable for station table") Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 12971b71d0fa..39893178a1a9 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -157,8 +157,24 @@ struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, const u8 *addr) { struct ieee80211_local *local = sdata->local; + struct sta_info *sta; + struct rhash_head *tmp; + const struct bucket_table *tbl; - return rhashtable_lookup_fast(&local->sta_hash, addr, sta_rht_params); + rcu_read_lock(); + tbl = rht_dereference_rcu(local->sta_hash.tbl, &local->sta_hash); + + for_each_sta_info(local, tbl, addr, sta, tmp) { + if (sta->sdata == sdata) { + rcu_read_unlock(); + /* this is safe as the caller must already hold + * another rcu read section or the mutex + */ + return sta; + } + } + rcu_read_unlock(); + return NULL; } /* From 9283b42e46c2646dff1bec47e2dd683add7f9972 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 23 Apr 2015 10:24:45 -0600 Subject: [PATCH 035/652] NVMe: Fix VPD B0 max sectors translation Use the namespace's block format for reporting the max transfer length. Max unmap count is left as-is since NVMe doesn't provide a max, so the value the driver provided the block layer is valid for any format. Reported-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- drivers/block/nvme-scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c index 6b736b00f63e..88f13c525712 100644 --- a/drivers/block/nvme-scsi.c +++ b/drivers/block/nvme-scsi.c @@ -944,7 +944,8 @@ static int nvme_trans_ext_inq_page(struct nvme_ns *ns, struct sg_io_hdr *hdr, static int nvme_trans_bdev_limits_page(struct nvme_ns *ns, struct sg_io_hdr *hdr, u8 *inq_response, int alloc_len) { - __be32 max_sectors = cpu_to_be32(queue_max_hw_sectors(ns->queue)); + __be32 max_sectors = cpu_to_be32( + nvme_block_nr(ns, queue_max_hw_sectors(ns->queue))); __be32 max_discard = cpu_to_be32(ns->queue->limits.max_discard_sectors); __be32 discard_desc_count = cpu_to_be32(0x100); From f054b56c951bf1731ba7314a4c7f1cc0b2977cc9 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 21 Apr 2015 10:00:19 +0800 Subject: [PATCH 036/652] blk-mq: fix race between timeout and CPU hotplug Firstly during CPU hotplug, even queue is freezed, timeout handler still may come and access hctx->tags, which may cause use after free, so this patch deactivates timeout handler inside CPU hotplug notifier. Secondly, tags can be shared by more than one queues, so we have to check if the hctx has been unmapped, otherwise still use-after-free on tags can be triggered. Cc: Reported-by: Dongsu Park Tested-by: Dongsu Park Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-mq.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index ade8a2d1b0aa..1fccb98aa28f 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -677,8 +677,11 @@ static void blk_mq_rq_timer(unsigned long priv) data.next = blk_rq_timeout(round_jiffies_up(data.next)); mod_timer(&q->timeout, data.next); } else { - queue_for_each_hw_ctx(q, hctx, i) - blk_mq_tag_idle(hctx); + queue_for_each_hw_ctx(q, hctx, i) { + /* the hctx may be unmapped, so check it here */ + if (blk_mq_hw_queue_mapped(hctx)) + blk_mq_tag_idle(hctx); + } } } @@ -2090,9 +2093,16 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb, */ list_for_each_entry(q, &all_q_list, all_q_node) blk_mq_freeze_queue_start(q); - list_for_each_entry(q, &all_q_list, all_q_node) + list_for_each_entry(q, &all_q_list, all_q_node) { blk_mq_freeze_queue_wait(q); + /* + * timeout handler can't touch hw queue during the + * reinitialization + */ + del_timer_sync(&q->timeout); + } + list_for_each_entry(q, &all_q_list, all_q_node) blk_mq_queue_reinit(q); From 2a34c0872adf252f23a6fef2d051a169ac796cef Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 21 Apr 2015 10:00:20 +0800 Subject: [PATCH 037/652] blk-mq: fix CPU hotplug handling hctx->tags has to be set as NULL in case that it is to be unmapped no matter if set->tags[hctx->queue_num] is NULL or not in blk_mq_map_swqueue() because shared tags can be freed already from another request queue. The same situation has to be considered during handling CPU online too. Unmapped hw queue can be remapped after CPU topo is changed, so we need to allocate tags for the hw queue in blk_mq_map_swqueue(). Then tags allocation for hw queue can be removed in hctx cpu online notifier, and it is reasonable to do that after mapping is updated. Cc: Reported-by: Dongsu Park Tested-by: Dongsu Park Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-mq.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 1fccb98aa28f..76f460e36f1d 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1574,22 +1574,6 @@ static int blk_mq_hctx_cpu_offline(struct blk_mq_hw_ctx *hctx, int cpu) return NOTIFY_OK; } -static int blk_mq_hctx_cpu_online(struct blk_mq_hw_ctx *hctx, int cpu) -{ - struct request_queue *q = hctx->queue; - struct blk_mq_tag_set *set = q->tag_set; - - if (set->tags[hctx->queue_num]) - return NOTIFY_OK; - - set->tags[hctx->queue_num] = blk_mq_init_rq_map(set, hctx->queue_num); - if (!set->tags[hctx->queue_num]) - return NOTIFY_STOP; - - hctx->tags = set->tags[hctx->queue_num]; - return NOTIFY_OK; -} - static int blk_mq_hctx_notify(void *data, unsigned long action, unsigned int cpu) { @@ -1597,8 +1581,11 @@ static int blk_mq_hctx_notify(void *data, unsigned long action, if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) return blk_mq_hctx_cpu_offline(hctx, cpu); - else if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) - return blk_mq_hctx_cpu_online(hctx, cpu); + + /* + * In case of CPU online, tags may be reallocated + * in blk_mq_map_swqueue() after mapping is updated. + */ return NOTIFY_OK; } @@ -1778,6 +1765,7 @@ static void blk_mq_map_swqueue(struct request_queue *q) unsigned int i; struct blk_mq_hw_ctx *hctx; struct blk_mq_ctx *ctx; + struct blk_mq_tag_set *set = q->tag_set; queue_for_each_hw_ctx(q, hctx, i) { cpumask_clear(hctx->cpumask); @@ -1806,16 +1794,20 @@ static void blk_mq_map_swqueue(struct request_queue *q) * disable it and free the request entries. */ if (!hctx->nr_ctx) { - struct blk_mq_tag_set *set = q->tag_set; - if (set->tags[i]) { blk_mq_free_rq_map(set, set->tags[i], i); set->tags[i] = NULL; - hctx->tags = NULL; } + hctx->tags = NULL; continue; } + /* unmapped hw queue can be remapped after CPU topo changed */ + if (!set->tags[i]) + set->tags[i] = blk_mq_init_rq_map(set, i); + hctx->tags = set->tags[i]; + WARN_ON(!hctx->tags); + /* * Set the map size to the number of mapped software queues. * This is more accurate and more efficient than looping From 464d1387acb94dc43ba772b35242345e3d2ead1b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Apr 2015 16:49:13 -0400 Subject: [PATCH 038/652] writeback: use |1 instead of +1 to protect against div by zero mm/page-writeback.c has several places where 1 is added to the divisor to prevent division by zero exceptions; however, if the original divisor is equivalent to -1, adding 1 leads to division by zero. There are three places where +1 is used for this purpose - one in pos_ratio_polynom() and two in bdi_position_ratio(). The second one in bdi_position_ratio() actually triggered div-by-zero oops on a machine running a 3.10 kernel. The divisor is x_intercept - bdi_setpoint + 1 == span + 1 span is confirmed to be (u32)-1. It isn't clear how it ended up that but it could be from write bandwidth calculation underflow fixed by c72efb658f7c ("writeback: fix possible underflow in write bandwidth calculation"). At any rate, +1 isn't a proper protection against div-by-zero. This patch converts all +1 protections to |1. Note that bdi_update_dirty_ratelimit() was already using |1 before this patch. Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Reviewed-by: Jan Kara Signed-off-by: Jens Axboe --- mm/page-writeback.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 5daf5568b9e1..eb59f7eea508 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -580,7 +580,7 @@ static long long pos_ratio_polynom(unsigned long setpoint, long x; x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT, - limit - setpoint + 1); + (limit - setpoint) | 1); pos_ratio = x; pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT; pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT; @@ -807,7 +807,7 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, * scale global setpoint to bdi's: * bdi_setpoint = setpoint * bdi_thresh / thresh */ - x = div_u64((u64)bdi_thresh << 16, thresh + 1); + x = div_u64((u64)bdi_thresh << 16, thresh | 1); bdi_setpoint = setpoint * (u64)x >> 16; /* * Use span=(8*write_bw) in single bdi case as indicated by @@ -822,7 +822,7 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, if (bdi_dirty < x_intercept - span / 4) { pos_ratio = div64_u64(pos_ratio * (x_intercept - bdi_dirty), - x_intercept - bdi_setpoint + 1); + (x_intercept - bdi_setpoint) | 1); } else pos_ratio /= 4; From 8406a4d56ea94d1d91f62cab3bed15399bac73cb Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Thu, 23 Apr 2015 10:47:44 -0600 Subject: [PATCH 039/652] elevator: fix double release of elevator module Our issue is descripted in below call path: ->elevator_init ->elevator_init_fn ->{cfq,deadline,noop}_init_queue ->elevator_alloc ->kzalloc_node fail to call kzalloc_node and then put module in elevator_alloc; fail to call elevator_init_fn and then put module again in elevator_init. Remove elevator_put invoking in error path of elevator_alloc to avoid double release issue. Signed-off-by: Chao Yu Reviewed-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/elevator.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/block/elevator.c b/block/elevator.c index 59794d0d38e3..8985038f398c 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -157,7 +157,7 @@ struct elevator_queue *elevator_alloc(struct request_queue *q, eq = kzalloc_node(sizeof(*eq), GFP_KERNEL, q->node); if (unlikely(!eq)) - goto err; + return NULL; eq->type = e; kobject_init(&eq->kobj, &elv_ktype); @@ -165,10 +165,6 @@ struct elevator_queue *elevator_alloc(struct request_queue *q, hash_init(eq->hash); return eq; -err: - kfree(eq); - elevator_put(e); - return NULL; } EXPORT_SYMBOL(elevator_alloc); From cb24d01d217497fb32467de22d773655f47d3896 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 22 Apr 2015 10:04:23 -0300 Subject: [PATCH 040/652] perf trace: Enable events when doing system wide tracing and starting a workload commit f7aa222ff397 Author: Arnaldo Carvalho de Melo Date: Tue Feb 3 13:25:39 2015 -0300 perf trace: No need to enable evsels for workload started from perf The assumption was that whenever a workload is specified, the attr.enable_on_exec evsel flag would be set, but that is not happening when perf_record_opts.system_wide is set, for instance That resulted in both perf_evlist__enable() and attr.enable_on_exec being not called/set, which made the events to remain disabled while the workload runs, producing no output. Fix it, by calling perf_evlist__enable() in the 'trace' tool when forking and not targetting a workload started from trace v2: Test against !target__none(), as suggested by Namhyung Kim, that is what is used in perf_evsel__config() when deciding if the attr.enable_on_exec flag to be set. More work is needed to cover other cases such as opts->initial_delay. Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Don Zickus Cc: Frederic Weisbecker Cc: Namhyung Kim Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-27z7169pvfxgj8upic636syv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index e124741be187..8842218e1856 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -2241,10 +2241,11 @@ static int trace__run(struct trace *trace, int argc, const char **argv) if (err < 0) goto out_error_mmap; + if (!target__none(&trace->opts.target)) + perf_evlist__enable(evlist); + if (forks) perf_evlist__start_workload(evlist); - else - perf_evlist__enable(evlist); trace->multiple_threads = evlist->threads->map[0] == -1 || evlist->threads->nr > 1 || From 02ac5421ddc634767c732f9b6a10a395a9ecfc4f Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 22 Apr 2015 11:11:57 -0300 Subject: [PATCH 041/652] perf trace: Disable events and drain events when forked workload ends We were not checking in the inner event processing loop if the forked workload had finished, which, on a busy system, may make it take a long time trying to drain events, entering a seemingly neverending loop, waiting for the system to get idle enough to make it drain the buffers. Fix it by disabling the events when 'done' is true, in the inner loop, to start draining what is in the buffers. Now: [root@ssdandy ~]# time trace --filter-pids 14003 -a sleep 1 | tail 996.748 ( 0.002 ms): sh/30296 rt_sigprocmask(how: SETMASK, nset: 0x7ffc83418160, sigsetsize: 8) = 0 996.751 ( 0.002 ms): sh/30296 rt_sigprocmask(how: BLOCK, nset: 0x7ffc834181f0, oset: 0x7ffc83418270, sigsetsize: 8) = 0 996.755 ( 0.002 ms): sh/30296 rt_sigaction(sig: INT, act: 0x7ffc83417f50, oact: 0x7ffc83417ff0, sigsetsize: 8) = 0 1004.543 ( 0.362 ms): tail/30198 ... [continued]: read()) = 4096 1004.548 ( 7.791 ms): sh/30296 wait4(upid: -1, stat_addr: 0x7ffc834181a0) ... 1004.975 ( 0.427 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1005.390 ( 0.410 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1005.743 ( 0.348 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1006.197 ( 0.449 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1006.492 ( 0.290 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 real 0m1.219s user 0m0.704s sys 0m0.331s [root@ssdandy ~]# Reported-by: Michael Petlan Suggested-by: Jiri Olsa Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Don Zickus Cc: Frederic Weisbecker Cc: Namhyung Kim Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-p6kpn1b26qcbe47pufpw0tex@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 8842218e1856..e122970361f2 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -2273,6 +2273,11 @@ next_event: if (interrupted) goto out_disable; + + if (done && !draining) { + perf_evlist__disable(evlist); + draining = true; + } } } From 6145c259cd454bcb7a1288f7bbb7b4fbc18175dd Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 23 Apr 2015 14:40:37 +0100 Subject: [PATCH 042/652] perf kmem: Consistently use PRIu64 for printing u64 values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building the perf tool for 32-bit ARM results in the following build error due to a combination of an incorrect conversion specifier and compiling with -Werror: builtin-kmem.c: In function ‘print_page_summary’: builtin-kmem.c:644:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] nr_alloc_freed, (total_alloc_freed_bytes) / 1024); ^ builtin-kmem.c:647:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024); ^ cc1: all warnings being treated as errors This patch fixes the problem by consistently using PRIu64 for printing out u64 values. Signed-off-by: Will Deacon Cc: David Ahern Cc: Jiri Olsa Cc: Joonsoo Kim Cc: Minchan Kim Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1429796437-1790-1-git-send-email-will.deacon@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-kmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index 63ea01349b6e..a1915b430044 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -640,9 +640,9 @@ static void print_page_summary(void) nr_page_frees, total_page_free_bytes / 1024); printf("\n"); - printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests", + printf("%-30s: %'16"PRIu64" [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests", nr_alloc_freed, (total_alloc_freed_bytes) / 1024); - printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total alloc-only requests", + printf("%-30s: %'16"PRIu64" [ %'16"PRIu64" KB ]\n", "Total alloc-only requests", nr_page_allocs - nr_alloc_freed, (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024); printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total free-only requests", From de28c15daf60e9625bece22f13a091fac8d05f1d Mon Sep 17 00:00:00 2001 From: Bobby Powers Date: Tue, 21 Apr 2015 19:19:41 -0400 Subject: [PATCH 043/652] tools lib api: Undefine _FORTIFY_SOURCE before setting it Some toolchains (like Hardened Gentoo) define _FORTIFY_SOURCE in the built-in, default args. This causes perf builds to fail with: :0:0: error: "_FORTIFY_SOURCE" redefined [-Werror] : note: this is the location of the previous definition cc1: all warnings being treated as errors To avoid this, undefine _FORTIFY_SOURCE before (possibly re-)defining it in tools/lib/api. v2 applies cleanly on top of already pulled kbuild changes for 4.1-rc1. Signed-off-by: Bobby Powers Acked-by: Jiri Olsa Cc: Dirk Gouders Cc: Michal Marek Cc: Paul Mackerras Cc: Peter Zijlstra Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/1429658381-3039-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/api/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/lib/api/Makefile b/tools/lib/api/Makefile index d8fe29fc19a4..8bd960658463 100644 --- a/tools/lib/api/Makefile +++ b/tools/lib/api/Makefile @@ -16,7 +16,7 @@ MAKEFLAGS += --no-print-directory LIBFILE = $(OUTPUT)libapi.a CFLAGS := $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) -CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -D_FORTIFY_SOURCE=2 -fPIC +CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fPIC CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 RM = rm -f From caf22d311a35d1c0c2c73e1f0988276d51175c8f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Apr 2015 11:10:10 +0200 Subject: [PATCH 044/652] mac80211: enable hash table shrinking The hashtable behaviour change was merged into the tree at about the same time as the mac80211 use of rhashtable, but of course these don't really conflict in the normal sense. Enable hash table shrinking now. Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 39893178a1a9..2880f2ae99ab 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -66,6 +66,7 @@ static const struct rhashtable_params sta_rht_params = { .nelem_hint = 3, /* start small */ + .automatic_shrinking = true, .head_offset = offsetof(struct sta_info, hash_node), .key_offset = offsetof(struct sta_info, sta.addr), .key_len = ETH_ALEN, From c5a06e75f38376238db6a38240bac4b27dfe5216 Mon Sep 17 00:00:00 2001 From: Fionn Cleary Date: Thu, 23 Apr 2015 21:13:40 +0200 Subject: [PATCH 045/652] spi/omap2-mcpsi: Always call spi_finalize_current_message() The spi queue waits forever for spi_finalize_current_message() to be called, blocking the bus. Ensure that all error paths from omap2_mcspi_transfer_one_message() call spi_finalize_current_message(). Signed-off-by: Fionn Cleary Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 4df8942058de..d1a5b9fc3eba 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1210,6 +1210,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, struct omap2_mcspi *mcspi; struct omap2_mcspi_dma *mcspi_dma; struct spi_transfer *t; + int status; spi = m->spi; mcspi = spi_master_get_devdata(master); @@ -1229,7 +1230,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, tx_buf ? "tx" : "", rx_buf ? "rx" : "", t->bits_per_word); - return -EINVAL; + status = -EINVAL; + goto out; } if (m->is_dma_mapped || len < DMA_MIN_BYTES) @@ -1241,7 +1243,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, if (dma_mapping_error(mcspi->dev, t->tx_dma)) { dev_dbg(mcspi->dev, "dma %cX %d bytes error\n", 'T', len); - return -EINVAL; + status = -EINVAL; + goto out; } } if (mcspi_dma->dma_rx && rx_buf != NULL) { @@ -1253,14 +1256,19 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, if (tx_buf != NULL) dma_unmap_single(mcspi->dev, t->tx_dma, len, DMA_TO_DEVICE); - return -EINVAL; + status = -EINVAL; + goto out; } } } omap2_mcspi_work(mcspi, m); + /* spi_finalize_current_message() changes the status inside the + * spi_message, save the status here. */ + status = m->status; +out: spi_finalize_current_message(master); - return 0; + return status; } static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) From a4e4f67f41d9bfcc2a00849a75712f09a7d43798 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 12 Mar 2015 16:46:00 -0500 Subject: [PATCH 046/652] parisc: %pf is only for function pointers Use %ps for actual addresses, otherwise you'll get bad output on arches like parisc64 where %pf expects a function descriptor. This wasn't normally seen on parisc64 because the code is not built unless DEBUG_SUPERIO_INIT is manually defined. Patch modified by Helge Deller to utilize KERN_DEBUG. Signed-off-by: Scott Wood Cc: linux-parisc@vger.kernel.org cc: James Bottomley Signed-off-by: Helge Deller --- drivers/parisc/superio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index 8be2096c8423..deeaed544222 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -348,7 +348,7 @@ int superio_fixup_irq(struct pci_dev *pcidev) BUG(); return -1; } - printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %pf\n", + printk(KERN_DEBUG "superio_fixup_irq(%s) ven 0x%x dev 0x%x from %ps\n", pci_name(pcidev), pcidev->vendor, pcidev->device, __builtin_return_address(0)); From 5fec97d0e3d93717f1d6a958a03e579078088861 Mon Sep 17 00:00:00 2001 From: Alex Dowad Date: Fri, 13 Mar 2015 20:14:45 +0200 Subject: [PATCH 047/652] parisc: copy_thread(): rename 'arg' argument to 'kthread_arg' The 'arg' argument to copy_thread() is only ever used when forking a new kernel thread. Hence, rename it to 'kthread_arg' for clarity (and consistency with do_fork() and other arch-specific implementations of copy_thread()). Signed-off-by: Alex Dowad Signed-off-by: Helge Deller --- arch/parisc/kernel/process.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 8a488c22a99f..809905a811ed 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -181,9 +181,12 @@ int dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *r) return 1; } +/* + * Copy architecture-specific thread state + */ int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long arg, struct task_struct *p) + unsigned long kthread_arg, struct task_struct *p) { struct pt_regs *cregs = &(p->thread.regs); void *stack = task_stack_page(p); @@ -195,11 +198,10 @@ copy_thread(unsigned long clone_flags, unsigned long usp, extern void * const child_return; if (unlikely(p->flags & PF_KTHREAD)) { + /* kernel thread */ memset(cregs, 0, sizeof(struct pt_regs)); if (!usp) /* idle thread */ return 0; - - /* kernel thread */ /* Must exit via ret_from_kernel_thread in order * to call schedule_tail() */ @@ -215,7 +217,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, #else cregs->gr[26] = usp; #endif - cregs->gr[25] = arg; + cregs->gr[25] = kthread_arg; } else { /* user thread */ /* usp must be word aligned. This also prevents users from From 50574dd2f63ed0afc3b666da27eb7062d26a39c5 Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Fri, 24 Apr 2015 18:41:17 +0800 Subject: [PATCH 048/652] spi: Kconfig: Add SOC_LS1021A to SPI_FSL_DSPI dependence LS1021A chip also has the DSPI module. Add it to the dependence. Signed-off-by: Haikun Wang Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ab8dfbef6f1b..d63719ceed45 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -303,7 +303,7 @@ config SPI_FSL_SPI config SPI_FSL_DSPI tristate "Freescale DSPI controller" select REGMAP_MMIO - depends on SOC_VF610 || COMPILE_TEST + depends on SOC_VF610 || SOC_LS1021A || COMPILE_TEST help This enables support for the Freescale DSPI controller in master mode. VF610 platform uses the controller. From 73ee39a4c944a11cfd6d43ba1f634da340bf5537 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 23 Apr 2015 14:11:47 +0200 Subject: [PATCH 049/652] spi: fsl-spi: fix devm_ioremap_resource() error case devm_ioremap_resource() doesn't return NULL but an ERR_PTR on error. Reported-by: Jonas Gorsky Signed-off-by: Christophe Leroy Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-cpm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 6f466ab1201a..896add8cfd3b 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -310,10 +310,15 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) if (mspi->flags & SPI_CPM1) { struct resource *res; + void *pram; res = platform_get_resource(to_platform_device(dev), IORESOURCE_MEM, 1); - mspi->pram = devm_ioremap_resource(dev, res); + pram = devm_ioremap_resource(dev, res); + if (IS_ERR(pram)) + mspi->pram = NULL; + else + mspi->pram = pram; } else { unsigned long pram_ofs = fsl_spi_cpm_get_pram(mspi); From 4ad1f4300e3bddf63109aa63cfb2d37e8585ecc7 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 14 Apr 2015 13:49:33 -0400 Subject: [PATCH 050/652] perf kmem: Fix compiles on RHEL6/OL6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 0d68bc92c48 breaks compiles on RHEL6/OL6: cc1: warnings being treated as errors builtin-kmem.c: In function ‘search_page_alloc_stat’: builtin-kmem.c:322: error: declaration of ‘stat’ shadows a global declaration node = &parent->rb_left; /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_alloc_event’: builtin-kmem.c:378: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_free_event’: builtin-kmem.c:431: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here Rename local variable to pstat to avoid the name conflict. Signed-off-by: David Ahern Link: http://lkml.kernel.org/r/1429033773-31383-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-kmem.c | 54 +++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 27 deletions(-) diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index a1915b430044..1634186d537c 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -319,7 +319,7 @@ static int page_stat_cmp(struct page_stat *a, struct page_stat *b) return 0; } -static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool create) +static struct page_stat *search_page_alloc_stat(struct page_stat *pstat, bool create) { struct rb_node **node = &page_alloc_tree.rb_node; struct rb_node *parent = NULL; @@ -331,7 +331,7 @@ static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool cre parent = *node; data = rb_entry(*node, struct page_stat, node); - cmp = page_stat_cmp(data, stat); + cmp = page_stat_cmp(data, pstat); if (cmp < 0) node = &parent->rb_left; else if (cmp > 0) @@ -345,10 +345,10 @@ static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool cre data = zalloc(sizeof(*data)); if (data != NULL) { - data->page = stat->page; - data->order = stat->order; - data->gfp_flags = stat->gfp_flags; - data->migrate_type = stat->migrate_type; + data->page = pstat->page; + data->order = pstat->order; + data->gfp_flags = pstat->gfp_flags; + data->migrate_type = pstat->migrate_type; rb_link_node(&data->node, parent, node); rb_insert_color(&data->node, &page_alloc_tree); @@ -375,7 +375,7 @@ static int perf_evsel__process_page_alloc_event(struct perf_evsel *evsel, unsigned int migrate_type = perf_evsel__intval(evsel, sample, "migratetype"); u64 bytes = kmem_page_size << order; - struct page_stat *stat; + struct page_stat *pstat; struct page_stat this = { .order = order, .gfp_flags = gfp_flags, @@ -401,21 +401,21 @@ static int perf_evsel__process_page_alloc_event(struct perf_evsel *evsel, * This is to find the current page (with correct gfp flags and * migrate type) at free event. */ - stat = search_page(page, true); - if (stat == NULL) + pstat = search_page(page, true); + if (pstat == NULL) return -ENOMEM; - stat->order = order; - stat->gfp_flags = gfp_flags; - stat->migrate_type = migrate_type; + pstat->order = order; + pstat->gfp_flags = gfp_flags; + pstat->migrate_type = migrate_type; this.page = page; - stat = search_page_alloc_stat(&this, true); - if (stat == NULL) + pstat = search_page_alloc_stat(&this, true); + if (pstat == NULL) return -ENOMEM; - stat->nr_alloc++; - stat->alloc_bytes += bytes; + pstat->nr_alloc++; + pstat->alloc_bytes += bytes; order_stats[order][migrate_type]++; @@ -428,7 +428,7 @@ static int perf_evsel__process_page_free_event(struct perf_evsel *evsel, u64 page; unsigned int order = perf_evsel__intval(evsel, sample, "order"); u64 bytes = kmem_page_size << order; - struct page_stat *stat; + struct page_stat *pstat; struct page_stat this = { .order = order, }; @@ -441,8 +441,8 @@ static int perf_evsel__process_page_free_event(struct perf_evsel *evsel, nr_page_frees++; total_page_free_bytes += bytes; - stat = search_page(page, false); - if (stat == NULL) { + pstat = search_page(page, false); + if (pstat == NULL) { pr_debug2("missing free at page %"PRIx64" (order: %d)\n", page, order); @@ -453,18 +453,18 @@ static int perf_evsel__process_page_free_event(struct perf_evsel *evsel, } this.page = page; - this.gfp_flags = stat->gfp_flags; - this.migrate_type = stat->migrate_type; + this.gfp_flags = pstat->gfp_flags; + this.migrate_type = pstat->migrate_type; - rb_erase(&stat->node, &page_tree); - free(stat); + rb_erase(&pstat->node, &page_tree); + free(pstat); - stat = search_page_alloc_stat(&this, false); - if (stat == NULL) + pstat = search_page_alloc_stat(&this, false); + if (pstat == NULL) return -ENOENT; - stat->nr_free++; - stat->free_bytes += bytes; + pstat->nr_free++; + pstat->free_bytes += bytes; return 0; } From 410ceb8f2f1d4edeb02d229ef192e76602005b8b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 24 Apr 2015 10:45:16 +0900 Subject: [PATCH 051/652] tools lib traceevent: Fix build failure on 32-bit arch In my i386 build, it failed like this: CC event-parse.o event-parse.c: In function 'print_str_arg': event-parse.c:3868:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat] Signed-off-by: Namhyung Kim Acked-by: Javi Merino Link: http://lkml.kernel.org/r/20150424020218.GF1905@sejong Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 12a7e2a40c89..aa21bd55bd8a 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -3865,7 +3865,7 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, } else if (el_size == 4) { trace_seq_printf(s, "%u", *(uint32_t *)num); } else if (el_size == 8) { - trace_seq_printf(s, "%lu", *(uint64_t *)num); + trace_seq_printf(s, "%"PRIu64, *(uint64_t *)num); } else { trace_seq_printf(s, "BAD SIZE:%d 0x%x", el_size, *(uint8_t *)num); From 10a50f1ab5f06c9a3ee5ece3ec52e607ed53c79f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 15 Apr 2015 11:14:11 +0300 Subject: [PATCH 052/652] genirq: Set IRQCHIP_SKIP_SET_WAKE flag for dummy_irq_chip Without this system suspend is broken on systems that have drivers calling enable/disable_irq_wake() for interrupts based off the dummy irq hook. (e.g. drivers/gpio/gpio-pcf857x.c) Signed-off-by: Roger Quadros Cc: Cc: Cc: Cc: Gregory Clement Link: http://lkml.kernel.org/r/552E1DD3.4040106@ti.com Signed-off-by: Thomas Gleixner --- kernel/irq/dummychip.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/irq/dummychip.c b/kernel/irq/dummychip.c index 988dc58e8847..2feb6feca0cc 100644 --- a/kernel/irq/dummychip.c +++ b/kernel/irq/dummychip.c @@ -57,5 +57,6 @@ struct irq_chip dummy_irq_chip = { .irq_ack = noop, .irq_mask = noop, .irq_unmask = noop, + .flags = IRQCHIP_SKIP_SET_WAKE, }; EXPORT_SYMBOL_GPL(dummy_irq_chip); From 1dcc73d7bb0429994c54d33b40c5fb82b741a791 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 22 Apr 2015 18:20:04 +0100 Subject: [PATCH 053/652] irqchip: gic: Drop support for gic_arch_extn Now that the users of gic_arch_extn have been fixed, drop the "feature" for good. This leads to the removal of some now useless locking. Signed-off-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic.c | 71 +-------------------------------- include/linux/irqchip/arm-gic.h | 2 - 2 files changed, 1 insertion(+), 72 deletions(-) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index a6ce3476834e..dd989148e689 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -80,19 +80,6 @@ static DEFINE_RAW_SPINLOCK(irq_controller_lock); #define NR_GIC_CPU_IF 8 static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly; -/* - * Supported arch specific GIC irq extension. - * Default make them NULL. - */ -struct irq_chip gic_arch_extn = { - .irq_eoi = NULL, - .irq_mask = NULL, - .irq_unmask = NULL, - .irq_retrigger = NULL, - .irq_set_type = NULL, - .irq_set_wake = NULL, -}; - #ifndef MAX_GIC_NR #define MAX_GIC_NR 1 #endif @@ -165,34 +152,16 @@ static int gic_peek_irq(struct irq_data *d, u32 offset) static void gic_mask_irq(struct irq_data *d) { - unsigned long flags; - - raw_spin_lock_irqsave(&irq_controller_lock, flags); gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR); - if (gic_arch_extn.irq_mask) - gic_arch_extn.irq_mask(d); - raw_spin_unlock_irqrestore(&irq_controller_lock, flags); } static void gic_unmask_irq(struct irq_data *d) { - unsigned long flags; - - raw_spin_lock_irqsave(&irq_controller_lock, flags); - if (gic_arch_extn.irq_unmask) - gic_arch_extn.irq_unmask(d); gic_poke_irq(d, GIC_DIST_ENABLE_SET); - raw_spin_unlock_irqrestore(&irq_controller_lock, flags); } static void gic_eoi_irq(struct irq_data *d) { - if (gic_arch_extn.irq_eoi) { - raw_spin_lock(&irq_controller_lock); - gic_arch_extn.irq_eoi(d); - raw_spin_unlock(&irq_controller_lock); - } - writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); } @@ -249,8 +218,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type) { void __iomem *base = gic_dist_base(d); unsigned int gicirq = gic_irq(d); - unsigned long flags; - int ret; /* Interrupt configuration for SGIs can't be changed */ if (gicirq < 16) @@ -261,25 +228,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) type != IRQ_TYPE_EDGE_RISING) return -EINVAL; - raw_spin_lock_irqsave(&irq_controller_lock, flags); - - if (gic_arch_extn.irq_set_type) - gic_arch_extn.irq_set_type(d, type); - - ret = gic_configure_irq(gicirq, type, base, NULL); - - raw_spin_unlock_irqrestore(&irq_controller_lock, flags); - - return ret; -} - -static int gic_retrigger(struct irq_data *d) -{ - if (gic_arch_extn.irq_retrigger) - return gic_arch_extn.irq_retrigger(d); - - /* the genirq layer expects 0 if we can't retrigger in hardware */ - return 0; + return gic_configure_irq(gicirq, type, base, NULL); } #ifdef CONFIG_SMP @@ -310,21 +259,6 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, } #endif -#ifdef CONFIG_PM -static int gic_set_wake(struct irq_data *d, unsigned int on) -{ - int ret = -ENXIO; - - if (gic_arch_extn.irq_set_wake) - ret = gic_arch_extn.irq_set_wake(d, on); - - return ret; -} - -#else -#define gic_set_wake NULL -#endif - static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) { u32 irqstat, irqnr; @@ -383,11 +317,9 @@ static struct irq_chip gic_chip = { .irq_unmask = gic_unmask_irq, .irq_eoi = gic_eoi_irq, .irq_set_type = gic_set_type, - .irq_retrigger = gic_retrigger, #ifdef CONFIG_SMP .irq_set_affinity = gic_set_affinity, #endif - .irq_set_wake = gic_set_wake, .irq_get_irqchip_state = gic_irq_get_irqchip_state, .irq_set_irqchip_state = gic_irq_set_irqchip_state, }; @@ -1053,7 +985,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, set_handle_irq(gic_handle_irq); } - gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic); gic_cpu_init(gic); gic_pm_init(gic); diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index 36ec4ae74634..9de976b4f9a7 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -95,8 +95,6 @@ struct device_node; -extern struct irq_chip gic_arch_extn; - void gic_set_irqchip_flags(unsigned long flags); void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, u32 offset, struct device_node *); From 149aabcc44e3e2c1f8fe4f0832be53d2db55b598 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 10 Apr 2015 12:56:41 +0530 Subject: [PATCH 054/652] clockevents: Shutdown detached clockevent device A clockevent device is marked DETACHED when it is replaced by another clockevent device. The device is shutdown properly for drivers that implement legacy ->set_mode() callback, as we call ->set_mode() for CLOCK_EVT_MODE_UNUSED as well. But for the new per-state callback interface, we skip shutting down the device, as we thought its an internal state change. That wasn't correct. The effect is that the device is left programmed in oneshot or periodic mode. Fall-back to 'case CLOCK_EVT_STATE_SHUTDOWN', to shutdown the device. Fixes: bd624d75db21 "clockevents: Introduce mode specific callbacks" Reported-by: Daniel Lezcano Signed-off-by: Viresh Kumar Cc: linaro-kernel@lists.linaro.org Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/eef0a91c51b74d4e52c8e5a95eca27b5a0563f07.1428650683.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/clockevents.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 25d942d1da27..629be4e21e96 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -117,11 +117,7 @@ static int __clockevents_set_state(struct clock_event_device *dev, /* Transition with new state-specific callbacks */ switch (state) { case CLOCK_EVT_STATE_DETACHED: - /* - * This is an internal state, which is guaranteed to go from - * SHUTDOWN to DETACHED. No driver interaction required. - */ - return 0; + /* The clockevent device is getting replaced. Shut it down. */ case CLOCK_EVT_STATE_SHUTDOWN: return dev->set_state_shutdown(dev); From 2000058e892cd6773b3061a56c0bd6535ac15afe Mon Sep 17 00:00:00 2001 From: Jonatas Rech Date: Wed, 15 Apr 2015 12:23:18 -0300 Subject: [PATCH 055/652] spi: fsl-espi: fix behaviour for full-duplex xfers This patch makes possible for protocol drivers to do full-duplex SPI transfers properly. Until now this driver could only be used for half-duplex transfers, since it always expected an spi_transfer with non-null tx_buf to be only used for TX, and those with non-null rx_buf to be only used for RX. The fix consists in correcting the fsl_espi_transfer length by taking into consideration duplex spi_transfers, and not just by adding n_tx and n_rx. Furthermore, this correction has exposed an inconsistency in the protocol driver <-> controller driver interaction. The spi-fsl-espi driver artificially inserts TX bytes when message fragmentation is necessary (due to SPCOM_TRANLEN_MAX) instead of informing the protocol driver of the hardware limitation. This was tested with the m25p80 NOR flash protocol driver. Since fixing this issue may cause other client drivers to malfunction, it was left as is. Signed-off-by: Jonatas Rech Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-espi.c | 45 ++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index d0a73a09a9bd..80d245ac846f 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -359,14 +359,16 @@ static void fsl_espi_rw_trans(struct spi_message *m, struct fsl_espi_transfer *trans, u8 *rx_buff) { struct fsl_espi_transfer *espi_trans = trans; - unsigned int n_tx = espi_trans->n_tx; - unsigned int n_rx = espi_trans->n_rx; + unsigned int total_len = espi_trans->len; struct spi_transfer *t; u8 *local_buf; u8 *rx_buf = rx_buff; unsigned int trans_len; unsigned int addr; - int i, pos, loop; + unsigned int tx_only; + unsigned int rx_pos = 0; + unsigned int pos; + int i, loop; local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); if (!local_buf) { @@ -374,36 +376,48 @@ static void fsl_espi_rw_trans(struct spi_message *m, return; } - for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { - trans_len = n_rx - pos; - if (trans_len > SPCOM_TRANLEN_MAX - n_tx) - trans_len = SPCOM_TRANLEN_MAX - n_tx; + for (pos = 0, loop = 0; pos < total_len; pos += trans_len, loop++) { + trans_len = total_len - pos; i = 0; + tx_only = 0; list_for_each_entry(t, &m->transfers, transfer_list) { if (t->tx_buf) { memcpy(local_buf + i, t->tx_buf, t->len); i += t->len; + if (!t->rx_buf) + tx_only += t->len; } } + /* Add additional TX bytes to compensate SPCOM_TRANLEN_MAX */ + if (loop > 0) + trans_len += tx_only; + + if (trans_len > SPCOM_TRANLEN_MAX) + trans_len = SPCOM_TRANLEN_MAX; + + /* Update device offset */ if (pos > 0) { addr = fsl_espi_cmd2addr(local_buf); - addr += pos; + addr += rx_pos; fsl_espi_addr2cmd(addr, local_buf); } - espi_trans->n_tx = n_tx; - espi_trans->n_rx = trans_len; - espi_trans->len = trans_len + n_tx; + espi_trans->len = trans_len; espi_trans->tx_buf = local_buf; espi_trans->rx_buf = local_buf; fsl_espi_do_trans(m, espi_trans); - memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); + /* If there is at least one RX byte then copy it to rx_buf */ + if (tx_only < SPCOM_TRANLEN_MAX) + memcpy(rx_buf + rx_pos, espi_trans->rx_buf + tx_only, + trans_len - tx_only); + + rx_pos += trans_len - tx_only; if (loop > 0) - espi_trans->actual_length += espi_trans->len - n_tx; + espi_trans->actual_length += espi_trans->len - tx_only; else espi_trans->actual_length += espi_trans->len; } @@ -418,6 +432,7 @@ static int fsl_espi_do_one_msg(struct spi_master *master, u8 *rx_buf = NULL; unsigned int n_tx = 0; unsigned int n_rx = 0; + unsigned int xfer_len = 0; struct fsl_espi_transfer espi_trans; list_for_each_entry(t, &m->transfers, transfer_list) { @@ -427,11 +442,13 @@ static int fsl_espi_do_one_msg(struct spi_master *master, n_rx += t->len; rx_buf = t->rx_buf; } + if ((t->tx_buf) || (t->rx_buf)) + xfer_len += t->len; } espi_trans.n_tx = n_tx; espi_trans.n_rx = n_rx; - espi_trans.len = n_tx + n_rx; + espi_trans.len = xfer_len; espi_trans.actual_length = 0; espi_trans.status = 0; From 8393b811f38acdf7fd8da2028708edad3e68ce1f Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 25 Apr 2015 19:52:36 +0200 Subject: [PATCH 056/652] libata: Add helper to determine when PHY events should be ignored This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libahci.c | 3 +-- drivers/ata/libata-core.c | 19 +++++++++++++++++++ include/linux/libata.h | 1 + 3 files changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 61a9c07e0dff..287c4ba0219f 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1707,8 +1707,7 @@ static void ahci_handle_port_interrupt(struct ata_port *ap, if (unlikely(resetting)) status &= ~PORT_IRQ_BAD_PMP; - /* if LPM is enabled, PHYRDY doesn't mean anything */ - if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) { + if (sata_lpm_ignore_phy_events(&ap->link)) { status &= ~PORT_IRQ_PHYRDY; ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f6cb1f1b30b7..12adcf78f94b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6752,6 +6752,25 @@ u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, return tmp; } +/** + * sata_lpm_ignore_phy_events - test if PHY event should be ignored + * @link: Link receiving the event + * + * Test whether the received PHY event has to be ignored or not. + * + * LOCKING: + * None: + * + * RETURNS: + * True if the event has to be ignored. + */ +bool sata_lpm_ignore_phy_events(struct ata_link *link) +{ + /* if LPM is enabled, PHYRDY doesn't mean anything */ + return !!(link->lpm_policy > ATA_LPM_MAX_POWER); +} +EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); + /* * Dummy port_ops */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 8dad4a307bb8..6138d87277af 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1201,6 +1201,7 @@ extern struct ata_device *ata_dev_pair(struct ata_device *adev); extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap); extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q); +extern bool sata_lpm_ignore_phy_events(struct ata_link *link); extern int ata_cable_40wire(struct ata_port *ap); extern int ata_cable_80wire(struct ata_port *ap); From 09c5b4803a80a5451d950d6a539d2eb311dc0fb1 Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 25 Apr 2015 19:52:37 +0200 Subject: [PATCH 057/652] libata: Ignore spurious PHY event on LPM policy change When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13 Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 15 ++++++++++++++- drivers/ata/libata-eh.c | 3 +++ include/linux/libata.h | 9 +++++++++ 3 files changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 12adcf78f94b..85e659945c12 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6766,8 +6766,21 @@ u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, */ bool sata_lpm_ignore_phy_events(struct ata_link *link) { + unsigned long lpm_timeout = link->last_lpm_change + + msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY); + /* if LPM is enabled, PHYRDY doesn't mean anything */ - return !!(link->lpm_policy > ATA_LPM_MAX_POWER); + if (link->lpm_policy > ATA_LPM_MAX_POWER) + return true; + + /* ignore the first PHY event after the LPM policy changed + * as it is might be spurious + */ + if ((link->flags & ATA_LFLAG_CHANGED) && + time_before(jiffies, lpm_timeout)) + return true; + + return false; } EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 07f41be38fbe..cf0022ec07f2 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3597,6 +3597,9 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, } } + link->last_lpm_change = jiffies; + link->flags |= ATA_LFLAG_CHANGED; + return 0; fail: diff --git a/include/linux/libata.h b/include/linux/libata.h index 6138d87277af..28aeae46f355 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -205,6 +205,7 @@ enum { ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */ ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */ + ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -309,6 +310,12 @@ enum { */ ATA_TMOUT_PMP_SRST_WAIT = 5000, + /* When the LPM policy is set to ATA_LPM_MAX_POWER, there might + * be a spurious PHY event, so ignore the first PHY event that + * occurs within 10s after the policy change. + */ + ATA_TMOUT_SPURIOUS_PHY = 10000, + /* ATA bus states */ BUS_UNKNOWN = 0, BUS_DMA = 1, @@ -788,6 +795,8 @@ struct ata_link { struct ata_eh_context eh_context; struct ata_device device[ATA_MAX_DEVICES]; + + unsigned long last_lpm_change; /* when last LPM change happened */ }; #define ATA_LINK_CLEAR_BEGIN offsetof(struct ata_link, active_tag) #define ATA_LINK_CLEAR_END offsetof(struct ata_link, device[0]) From 8e71c04f863a1754f21b27fb8ecb773d680a0a80 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Mon, 20 Apr 2015 13:57:18 +0200 Subject: [PATCH 058/652] iio:st_sensors: Fix oops when probing SPI devices In SPI mode the transfer buffer is locked with a mutex. However this mutex is only initilized after the probe, but some transfer needs to be done in the probe. To fix this bug we move the mutex initialization at the beginning of the device probe. Signed-off-by: Alban Bedel Acked-by: Denis Ciocca Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/common/st_sensors/st_sensors_core.c | 2 -- drivers/iio/gyro/st_gyro_core.c | 1 + drivers/iio/magnetometer/st_magn_core.c | 1 + drivers/iio/pressure/st_pressure_core.c | 1 + 5 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 58d1d13d552a..211b13271c61 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -546,6 +546,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &accel_info; + mutex_init(&adata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index edd13d2b4121..8dd0477e201c 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -304,8 +304,6 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, struct st_sensors_platform_data *of_pdata; int err = 0; - mutex_init(&sdata->tb.buf_lock); - /* If OF/DT pdata exists, it will take precedence of anything else */ of_pdata = st_sensors_of_probe(indio_dev->dev.parent, pdata); if (of_pdata) diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 21395f26d227..ffe96642b6d0 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -400,6 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &gyro_info; + mutex_init(&gdata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 8ade473f99fe..2e56f812a644 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -369,6 +369,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &magn_info; + mutex_init(&mdata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 97baf40d424b..e881fa6291e9 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -417,6 +417,7 @@ int st_press_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &press_info; + mutex_init(&press_data->tb.buf_lock); st_sensors_power_enable(indio_dev); From cd62322a9767f9a0bcf855123c478187e38a10f4 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:48 +0300 Subject: [PATCH 059/652] iio: accel: mma9553: fix endianness issue when reading status Refactor code for simplicity and clarity. This also fixes an endianness issue with the original code. When reading multiple registers, the received buffer of 16-bytes words is little endian (status, step count). On big endian machines, casting them to u32 would result in reversed order in the buffer (step count, status) leading to incorrect values for step count and activity. Signed-off-by: Irina Tirdea Reported-by: Hartmut Knaack Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9553.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 2df1af7d43fc..607dbfcb49ab 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -316,22 +316,19 @@ static int mma9553_set_config(struct mma9553_data *data, u16 reg, static int mma9553_read_activity_stepcnt(struct mma9553_data *data, u8 *activity, u16 *stepcnt) { - u32 status_stepcnt; - u16 status; + u16 buf[2]; int ret; ret = mma9551_read_status_words(data->client, MMA9551_APPID_PEDOMETER, - MMA9553_REG_STATUS, sizeof(u32), - (u16 *) &status_stepcnt); + MMA9553_REG_STATUS, sizeof(u32), buf); if (ret < 0) { dev_err(&data->client->dev, "error reading status and stepcnt\n"); return ret; } - status = status_stepcnt & MMA9553_MASK_CONF_WORD; - *activity = mma9553_get_bits(status, MMA9553_MASK_STATUS_ACTIVITY); - *stepcnt = status_stepcnt >> 16; + *activity = mma9553_get_bits(buf[0], MMA9553_MASK_STATUS_ACTIVITY); + *stepcnt = buf[1]; return 0; } From 2a4d20322d1c619ae2f07378d5b360e85f562c98 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:50 +0300 Subject: [PATCH 060/652] iio: accel: mma9551_core: prevent buffer overrun The mma9551 functions that read/write word arrays from the device have a limit for the buffer size given by the device specifications. Check that the requested buffer length is within required limits when transferring word arrays. This will prevent buffer overrun in the mma9551_read/write_*_words functions and also in the mma9551_transfer call when writing into the MBOX response/request structure. Signed-off-by: Irina Tirdea Reported-by: Hartmut Knaack Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9551_core.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c index 7f55a6d7cd03..c6d5a3a40b60 100644 --- a/drivers/iio/accel/mma9551_core.c +++ b/drivers/iio/accel/mma9551_core.c @@ -389,7 +389,12 @@ int mma9551_read_config_words(struct i2c_client *client, u8 app_id, { int ret, i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, reg, NULL, 0, (u8 *) be_buf, len); @@ -424,7 +429,12 @@ int mma9551_read_status_words(struct i2c_client *client, u8 app_id, { int ret, i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, reg, NULL, 0, (u8 *) be_buf, len); @@ -459,7 +469,12 @@ int mma9551_write_config_words(struct i2c_client *client, u8 app_id, { int i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } for (i = 0; i < len_words; i++) be_buf[i] = cpu_to_be16(buf[i]); From ae2ec9597c9329fdf503af264966bc7e421daa58 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:51 +0300 Subject: [PATCH 061/652] iio: accel: mma9553: add enable channel for activity Add an enable channel for activity, so it can also be polled independently of events or other channels. Signed-off-by: Irina Tirdea Reported-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9553.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 607dbfcb49ab..1a256055a6f7 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -968,7 +968,8 @@ static const struct iio_chan_spec_ext_info mma9553_ext_info[] = { .modified = 1, \ .channel2 = _chan2, \ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT) | \ + BIT(IIO_CHAN_INFO_ENABLE), \ .event_spec = mma9553_activity_events, \ .num_event_specs = ARRAY_SIZE(mma9553_activity_events), \ .ext_info = mma9553_ext_info, \ From 1d93353da536d3403ac291dc96070f434f6cf285 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Mon, 13 Apr 2015 18:40:49 +0300 Subject: [PATCH 062/652] iio: accel: mma9553: check input value for activity period When setting the activity period, the value introduced by the user in sysfs is not checked for validity. Add a boundary check so that only allowed values are reported as successfully written to device. Signed-off-by: Irina Tirdea Reported-by: Hartmut Knaack Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9553.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 1a256055a6f7..365a109aaaef 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -54,6 +54,7 @@ #define MMA9553_MASK_CONF_STEPCOALESCE GENMASK(7, 0) #define MMA9553_REG_CONF_ACTTHD 0x0E +#define MMA9553_MAX_ACTTHD GENMASK(15, 0) /* Pedometer status registers (R-only) */ #define MMA9553_REG_STATUS 0x00 @@ -869,6 +870,9 @@ static int mma9553_write_event_value(struct iio_dev *indio_dev, case IIO_EV_INFO_PERIOD: switch (chan->type) { case IIO_ACTIVITY: + if (val < 0 || val > MMA9553_ACTIVITY_THD_TO_SEC( + MMA9553_MAX_ACTTHD)) + return -EINVAL; mutex_lock(&data->mutex); ret = mma9553_set_config(data, MMA9553_REG_CONF_ACTTHD, &data->conf.actthd, From bc1aabad39f42fa293f2a944fd9327bba27b59cd Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Thu, 2 Apr 2015 15:13:02 +0200 Subject: [PATCH 063/652] extcon: usb-gpio: register extcon device before IRQ registration IRQ handler touches info->edev, so if interrupt occurs before extcon device initialization it can cause NULL pointer dereference. Doing extcon initialization before IRQ handler registration fixes this problem. Signed-off-by: Robert Baldyga Acked-by: Roger Quadros Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-usb-gpio.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index de67fce18984..e45d1f13f445 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -119,6 +119,18 @@ static int usb_extcon_probe(struct platform_device *pdev) return PTR_ERR(info->id_gpiod); } + info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, info->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEBOUNCE_MS * 1000); if (ret < 0) @@ -142,18 +154,6 @@ static int usb_extcon_probe(struct platform_device *pdev) return ret; } - info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); - if (IS_ERR(info->edev)) { - dev_err(dev, "failed to allocate extcon device\n"); - return -ENOMEM; - } - - ret = devm_extcon_dev_register(dev, info->edev); - if (ret < 0) { - dev_err(dev, "failed to register extcon device\n"); - return ret; - } - platform_set_drvdata(pdev, info); device_init_wakeup(dev, 1); From 53d2669844263fd5fdc70f0eb6a2eb8a21086d8e Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 20 Apr 2015 16:02:31 +0200 Subject: [PATCH 064/652] ARM: ux500: Move GPIO regulator for SD-card into board DTSs The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but instead it's specific to the board. Move the definition of it, into the board DTSs. Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 17 ----------------- arch/arm/boot/dts/ste-href.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/ste-snowball.dts | 15 +++++++++++++++ 3 files changed, 32 insertions(+), 17 deletions(-) diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index bfd3f1c734b8..2201cd5da3bb 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1017,23 +1017,6 @@ status = "disabled"; }; - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - enable-active-high; - - states = <1800000 0x1 - 2900000 0x0>; - - status = "disabled"; - }; - mcde@a0350000 { compatible = "stericsson,mcde"; reg = <0xa0350000 0x1000>, /* MCDE */ diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index bf8f0eddc2c0..8cf499ad31a5 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -111,6 +111,23 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 206826a855c0..65a7f630af82 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -146,8 +146,23 @@ }; vmmci: regulator-gpio { + compatible = "regulator-gpio"; + gpios = <&gpio7 4 0x4>; enable-gpio = <&gpio6 25 0x4>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; }; // External Micro SD slot From f9a8c3914ba85f19c3360b19612d77c47adb8942 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 20 Apr 2015 16:02:32 +0200 Subject: [PATCH 065/652] ARM: ux500: Enable GPIO regulator for SD-card for HREF boards Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-href.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 8cf499ad31a5..744c1e3a744d 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -124,8 +124,6 @@ states = <1800000 0x1 2900000 0x0>; - - status = "disabled"; }; // External Micro SD slot From 11133db7a836b0cb411faa048f07a38e994d1382 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 20 Apr 2015 16:02:33 +0200 Subject: [PATCH 066/652] ARM: ux500: Enable GPIO regulator for SD-card for snowball Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-snowball.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 65a7f630af82..1bc84ebdccaa 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -161,8 +161,6 @@ states = <1800000 0x1 2900000 0x0>; - - status = "disabled"; }; // External Micro SD slot From 750e30d4076ae5e02ad13a376e96c95a2627742c Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 14 Apr 2015 11:50:13 +0200 Subject: [PATCH 067/652] ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC There is no crystal connected to the internal RTC on the Open Block AX3. So let's disable it in order to prevent the kernel probing the driver uselessly. Eventually this patches removes the following warning message from the boot log: "rtc-mv d0010300.rtc: internal RTC not ticking" Acked-by: Andrew Lunn Signed-off-by: Gregory CLEMENT Cc: # v3.8 + --- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index e3b08fb959e5..990e8a2100f0 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -105,6 +105,10 @@ }; internal-regs { + rtc@10300 { + /* No crystal connected to the internal RTC */ + status = "disabled"; + }; serial@12000 { status = "okay"; }; From 325d73bf8fea8af2227240b7305253fb052d3a68 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 3 Apr 2015 14:42:58 +0800 Subject: [PATCH 068/652] xen/blkback: safely unmap purge persistent grants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit c43cf3ea8385 ("xen-blkback: safely unmap grants in case they are still in use") use gnttab_unmap_refs_async() to wait until the mapped pages are no longer in use before unmapping them, but that commit missed the persistent case. Purge persistent pages can't be unmapped either unless no longer in use. Signed-off-by: Bob Liu Acked-by: Roger Pau Monné Signed-off-by: David Vrabel --- drivers/block/xen-blkback/blkback.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index bd2b3bbbb22c..48e98f2712b5 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -329,8 +329,18 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST]; struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST]; struct persistent_gnt *persistent_gnt; - int ret, segs_to_unmap = 0; + int segs_to_unmap = 0; struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work); + struct gntab_unmap_queue_data unmap_data; + struct completion unmap_completion; + + init_completion(&unmap_completion); + + unmap_data.data = &unmap_completion; + unmap_data.done = &free_persistent_gnts_unmap_callback; + unmap_data.pages = pages; + unmap_data.unmap_ops = unmap; + unmap_data.kunmap_ops = NULL; while(!list_empty(&blkif->persistent_purge_list)) { persistent_gnt = list_first_entry(&blkif->persistent_purge_list, @@ -346,17 +356,19 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) pages[segs_to_unmap] = persistent_gnt->page; if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) { - ret = gnttab_unmap_refs(unmap, NULL, pages, - segs_to_unmap); - BUG_ON(ret); + unmap_data.count = segs_to_unmap; + gnttab_unmap_refs_async(&unmap_data); + wait_for_completion(&unmap_completion); + put_free_pages(blkif, pages, segs_to_unmap); segs_to_unmap = 0; } kfree(persistent_gnt); } if (segs_to_unmap > 0) { - ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap); - BUG_ON(ret); + unmap_data.count = segs_to_unmap; + gnttab_unmap_refs_async(&unmap_data); + wait_for_completion(&unmap_completion); put_free_pages(blkif, pages, segs_to_unmap); } } From b44166cd46e28dd608d5baa5873047a40f32919c Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 3 Apr 2015 14:42:59 +0800 Subject: [PATCH 069/652] xen/grant: introduce func gnttab_unmap_refs_sync() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are several place using gnttab async unmap and wait for completion, so move the common code to a function gnttab_unmap_refs_sync(). Signed-off-by: Bob Liu Acked-by: Roger Pau Monné Acked-by: Konrad Rzeszutek Wilk Signed-off-by: David Vrabel --- drivers/block/xen-blkback/blkback.c | 31 +++-------------------------- drivers/xen/gntdev.c | 28 +++----------------------- drivers/xen/grant-table.c | 28 ++++++++++++++++++++++++++ include/xen/grant_table.h | 1 + 4 files changed, 35 insertions(+), 53 deletions(-) diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 48e98f2712b5..713fc9ff1149 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -265,17 +265,6 @@ static void put_persistent_gnt(struct xen_blkif *blkif, atomic_dec(&blkif->persistent_gnt_in_use); } -static void free_persistent_gnts_unmap_callback(int result, - struct gntab_unmap_queue_data *data) -{ - struct completion *c = data->data; - - /* BUG_ON used to reproduce existing behaviour, - but is this the best way to deal with this? */ - BUG_ON(result); - complete(c); -} - static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root, unsigned int num) { @@ -285,12 +274,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root, struct rb_node *n; int segs_to_unmap = 0; struct gntab_unmap_queue_data unmap_data; - struct completion unmap_completion; - init_completion(&unmap_completion); - - unmap_data.data = &unmap_completion; - unmap_data.done = &free_persistent_gnts_unmap_callback; unmap_data.pages = pages; unmap_data.unmap_ops = unmap; unmap_data.kunmap_ops = NULL; @@ -310,8 +294,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root, !rb_next(&persistent_gnt->node)) { unmap_data.count = segs_to_unmap; - gnttab_unmap_refs_async(&unmap_data); - wait_for_completion(&unmap_completion); + BUG_ON(gnttab_unmap_refs_sync(&unmap_data)); put_free_pages(blkif, pages, segs_to_unmap); segs_to_unmap = 0; @@ -332,12 +315,7 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) int segs_to_unmap = 0; struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work); struct gntab_unmap_queue_data unmap_data; - struct completion unmap_completion; - init_completion(&unmap_completion); - - unmap_data.data = &unmap_completion; - unmap_data.done = &free_persistent_gnts_unmap_callback; unmap_data.pages = pages; unmap_data.unmap_ops = unmap; unmap_data.kunmap_ops = NULL; @@ -357,9 +335,7 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) { unmap_data.count = segs_to_unmap; - gnttab_unmap_refs_async(&unmap_data); - wait_for_completion(&unmap_completion); - + BUG_ON(gnttab_unmap_refs_sync(&unmap_data)); put_free_pages(blkif, pages, segs_to_unmap); segs_to_unmap = 0; } @@ -367,8 +343,7 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) } if (segs_to_unmap > 0) { unmap_data.count = segs_to_unmap; - gnttab_unmap_refs_async(&unmap_data); - wait_for_completion(&unmap_completion); + BUG_ON(gnttab_unmap_refs_sync(&unmap_data)); put_free_pages(blkif, pages, segs_to_unmap); } } diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index d5bb1a33d0a3..89274850741b 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -327,30 +327,10 @@ static int map_grant_pages(struct grant_map *map) return err; } -struct unmap_grant_pages_callback_data -{ - struct completion completion; - int result; -}; - -static void unmap_grant_callback(int result, - struct gntab_unmap_queue_data *data) -{ - struct unmap_grant_pages_callback_data* d = data->data; - - d->result = result; - complete(&d->completion); -} - static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) { int i, err = 0; struct gntab_unmap_queue_data unmap_data; - struct unmap_grant_pages_callback_data data; - - init_completion(&data.completion); - unmap_data.data = &data; - unmap_data.done= &unmap_grant_callback; if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) { int pgno = (map->notify.addr >> PAGE_SHIFT); @@ -367,11 +347,9 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) unmap_data.pages = map->pages + offset; unmap_data.count = pages; - gnttab_unmap_refs_async(&unmap_data); - - wait_for_completion(&data.completion); - if (data.result) - return data.result; + err = gnttab_unmap_refs_sync(&unmap_data); + if (err) + return err; for (i = 0; i < pages; i++) { if (map->unmap_ops[offset+i].status) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 17972fbacddc..b1c7170e5c9e 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -123,6 +123,11 @@ struct gnttab_ops { int (*query_foreign_access)(grant_ref_t ref); }; +struct unmap_refs_callback_data { + struct completion completion; + int result; +}; + static struct gnttab_ops *gnttab_interface; static int grant_table_version; @@ -863,6 +868,29 @@ void gnttab_unmap_refs_async(struct gntab_unmap_queue_data* item) } EXPORT_SYMBOL_GPL(gnttab_unmap_refs_async); +static void unmap_refs_callback(int result, + struct gntab_unmap_queue_data *data) +{ + struct unmap_refs_callback_data *d = data->data; + + d->result = result; + complete(&d->completion); +} + +int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item) +{ + struct unmap_refs_callback_data data; + + init_completion(&data.completion); + item->data = &data; + item->done = &unmap_refs_callback; + gnttab_unmap_refs_async(item); + wait_for_completion(&data.completion); + + return data.result; +} +EXPORT_SYMBOL_GPL(gnttab_unmap_refs_sync); + static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes) { int rc; diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 143ca5ffab7a..4478f4b4aae2 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -191,6 +191,7 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, struct gnttab_unmap_grant_ref *kunmap_ops, struct page **pages, unsigned int count); void gnttab_unmap_refs_async(struct gntab_unmap_queue_data* item); +int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item); /* Perform a batch of grant map/copy operations. Retry every batch slot From cfe8c59762244251fd9a5e281d48808095ff4090 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 14 Apr 2015 11:05:04 -0300 Subject: [PATCH 070/652] ARM: dts: imx23-olinuxino: Fix polarity of LED GPIO On imx23-olinuxino the LED turns on when level logic high is aplied to GPIO2_1. Fix the gpios property accordingly. Fixes: b34aa1850244 ("ARM: dts: imx23-olinuxino: Remove unneeded "default-on"") Reported-by: Stefan Wahren Signed-off-by: Fabio Estevam Tested-by: Stefan Wahren Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-olinuxino.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7e6eef2488e8..839a3b96910d 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -12,6 +12,7 @@ */ /dts-v1/; +#include #include "imx23.dtsi" / { @@ -122,7 +123,7 @@ user { label = "green"; - gpios = <&gpio2 1 1>; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; }; }; }; From 0fdebe1a2f4d3a8fc03754022fabf8ba95e131a3 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Tue, 14 Apr 2015 20:37:26 +0000 Subject: [PATCH 071/652] ARM: dts: imx23-olinuxino: Fix dr_mode of usb0 The dr_mode of usb0 on imx233-olinuxino is left to default "otg". Since the green LED (GPIO2_1) on imx233-olinuxino is connected to the same pin as USB_OTG_ID it's possible to disable USB host by LED toggling: echo 0 > /sys/class/leds/green/brightness [ 1068.890000] ci_hdrc ci_hdrc.0: remove, state 1 [ 1068.890000] usb usb1: USB disconnect, device number 1 [ 1068.920000] usb 1-1: USB disconnect, device number 2 [ 1068.920000] usb 1-1.1: USB disconnect, device number 3 [ 1069.070000] usb 1-1.2: USB disconnect, device number 4 [ 1069.450000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 1074.460000] ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11 This patch fixes the issue by setting dr_mode to "host" in the dts file. Reported-by: Harald Geyer Signed-off-by: Stefan Wahren Reviewed-by: Fabio Estevam Reviewed-by: Marek Vasut Acked-by: Peter Chen Fixes: b49312948285 ("ARM: dts: imx23-olinuxino: Add USB host support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-olinuxino.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 839a3b96910d..82045398bf1f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -94,6 +94,7 @@ ahb@80080000 { usb0: usb@80080000 { + dr_mode = "host"; vbus-supply = <®_usb0_vbus>; status = "okay"; }; From 61b8c7b58450846b63b35e90866d2eb4fde44834 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 20 Apr 2015 15:51:38 +0200 Subject: [PATCH 072/652] ARM: mach-imx: devices: platform-sdhci-esdhc-imx: fix broken email address My Pengutronix address is not valid anymore, redirect people to the Pengutronix kernel team. Reported-by: Harald Geyer Signed-off-by: Wolfram Sang Acked-by: Robert Schwebel Signed-off-by: Shawn Guo --- arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index fb8d4a2ad48c..a5edd7d60266 100644 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Pengutronix, Wolfram Sang + * Copyright (C) 2010 Pengutronix, Wolfram Sang * * This program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License version 2 as published by the From a4811622fea15fdc78102069f573061fc87f3570 Mon Sep 17 00:00:00 2001 From: Qipeng Zha Date: Fri, 10 Apr 2015 06:25:10 +0800 Subject: [PATCH 073/652] gpiolib: change gpio pin from unsigned to signed in acpi callback The signed error will be wrongly used as valid gpio offset Reported-by: David Binderman Signed-off-by: Alan Cox Signed-off-by: Qipeng Zha Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index d2303d50f561..725d16138b74 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -550,7 +550,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address, length = min(agpio->pin_table_length, (u16)(pin_index + bits)); for (i = pin_index; i < length; ++i) { - unsigned pin = agpio->pin_table[i]; + int pin = agpio->pin_table[i]; struct acpi_gpio_connection *conn; struct gpio_desc *desc; bool found; From a526973e0291b245aefe12023a7f775f3c0e59a2 Mon Sep 17 00:00:00 2001 From: Andrew Andrianov Date: Sat, 11 Apr 2015 23:29:19 +0300 Subject: [PATCH 074/652] pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio) Signed-off-by: Andrew Andrianov Signed-off-by: Linus Walleij --- drivers/pinctrl/mvebu/pinctrl-armada-370.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-370.c b/drivers/pinctrl/mvebu/pinctrl-armada-370.c index 42f930f70de3..03aa58c4cb85 100644 --- a/drivers/pinctrl/mvebu/pinctrl-armada-370.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-370.c @@ -364,7 +364,7 @@ static struct mvebu_mpp_mode mv88f6710_mpp_modes[] = { MPP_FUNCTION(0x5, "audio", "mclk"), MPP_FUNCTION(0x6, "uart0", "cts")), MPP_MODE(63, - MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x0, "gpio", NULL), MPP_FUNCTION(0x1, "spi0", "sck"), MPP_FUNCTION(0x2, "tclk", NULL)), MPP_MODE(64, From dc391502fdbf97a9cabdc58ba8c915175383f681 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Fri, 17 Apr 2015 17:50:49 +0300 Subject: [PATCH 075/652] pinctrl: qcom-spmi: Fix pin direction configuration Pin direction configuration was incorrectly overwritten by output and function values in set_mux(). Fix this. Signed-off-by: Ivan T. Ivanov Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index b2d22218a258..de684ca93b5a 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -260,6 +260,7 @@ static int pmic_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned function, val = 1; } + val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT; val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT; val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT; diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 8f36c5f91949..890df16353b3 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -370,6 +370,7 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function, } } + val = val << PMIC_MPP_REG_MODE_DIR_SHIFT; val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT; val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK; From 7f8d49dcc66a3dd3a8fc3078330b8fb9e616ad3f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 Apr 2015 15:59:53 +0200 Subject: [PATCH 076/652] ARM: dts: imx6: phyFLEX: USB VBUS control is active-high The fixed-regulator bindings require a separate property enable-active-high, the standard gpio phandle property polarity setting is ignored. Signed-off-by: Philipp Zabel Fixes: 4fe69a934b1f ("ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 19cc269a08d4..1ce6133b67f5 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -31,6 +31,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 15 0>; + enable-active-high; }; reg_usb_h1_vbus: regulator@1 { @@ -40,6 +41,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 0 0>; + enable-active-high; }; }; From f90d3f0d0a11fa77918fd5497cb616dd2faa8431 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 24 Apr 2015 09:27:33 +0200 Subject: [PATCH 077/652] ARM: dts: imx25: Add #pwm-cells to pwm4 The property '#pwm-cells' is currently missing. It is not possible to use pwm4 without this property. Signed-off-by: Markus Pargmann Fixes: 5658a68fb578 ("ARM i.MX25: Add devicetree") Cc: Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index e4d3aecc4ed2..677f81d9dcd5 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -428,6 +428,7 @@ pwm4: pwm@53fc8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; reg = <0x53fc8000 0x4000>; clocks = <&clks 108>, <&clks 52>; clock-names = "ipg", "per"; From 4ada77e37a773168fea484899201e272ab44ba8b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 24 Apr 2015 13:29:47 +0200 Subject: [PATCH 078/652] ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name Fix a typo in the TX DMA interrupt name for AUART4. This patch makes AUART4 operational again. Signed-off-by: Marek Vasut Fixes: f30fb03d4d3a ("ARM: dts: add generic DMA device tree binding for mxs-dma") Cc: stable@vger.kernel.org Acked-by: Stefan Wahren Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt | 2 +- arch/arm/boot/dts/imx28.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt index a4873e5e3e36..e30e184f50c7 100644 --- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 { 80 81 68 69 70 71 72 73 74 75 76 77>; - interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 25e25f82fbae..4e073e854742 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -913,7 +913,7 @@ 80 81 68 69 70 71 72 73 74 75 76 77>; - interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; From 393a33970540ac6a2c894b0d6ef3f5d485860884 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Sun, 26 Apr 2015 16:43:31 +0800 Subject: [PATCH 079/652] block:bounce: fix call inc_|dec_zone_page_state on different pages confuse value of NR_BOUNCE Commit d2c5e30c9a1420902262aa923794d2ae4e0bc391 ("[PATCH] zoned vm counters: conversion of nr_bounce to per zone counter") convert statistic of nr_bounce to per zone and one global value in vm_stat, but it call inc_|dec_zone_page_state on different pages, then different zones, and cause us to get unexpected value of NR_BOUNCE. Below is the result on my machine: Mar 2 09:26:08 udknight kernel: [144766.778265] Mem-Info: Mar 2 09:26:08 udknight kernel: [144766.778266] DMA per-cpu: Mar 2 09:26:08 udknight kernel: [144766.778268] CPU 0: hi: 0, btch: 1 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778269] CPU 1: hi: 0, btch: 1 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778270] Normal per-cpu: Mar 2 09:26:08 udknight kernel: [144766.778271] CPU 0: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778273] CPU 1: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778274] HighMem per-cpu: Mar 2 09:26:08 udknight kernel: [144766.778275] CPU 0: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778276] CPU 1: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778279] active_anon:46926 inactive_anon:287406 isolated_anon:0 Mar 2 09:26:08 udknight kernel: [144766.778279] active_file:105085 inactive_file:139432 isolated_file:0 Mar 2 09:26:08 udknight kernel: [144766.778279] unevictable:653 dirty:0 writeback:0 unstable:0 Mar 2 09:26:08 udknight kernel: [144766.778279] free:178957 slab_reclaimable:6419 slab_unreclaimable:9966 Mar 2 09:26:08 udknight kernel: [144766.778279] mapped:4426 shmem:305277 pagetables:784 bounce:0 Mar 2 09:26:08 udknight kernel: [144766.778279] free_cma:0 Mar 2 09:26:08 udknight kernel: [144766.778286] DMA free:3324kB min:68kB low:84kB high:100kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15976kB managed:15900kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes Mar 2 09:26:08 udknight kernel: [144766.778287] lowmem_reserve[]: 0 822 3754 3754 Mar 2 09:26:08 udknight kernel: [144766.778293] Normal free:26828kB min:3632kB low:4540kB high:5448kB active_anon:4872kB inactive_anon:68kB active_file:1796kB inactive_file:1796kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:892920kB managed:842560kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:4144kB slab_reclaimable:25676kB slab_unreclaimable:39864kB kernel_stack:1944kB pagetables:3136kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:2412612 all_unreclaimable? yes Mar 2 09:26:08 udknight kernel: [144766.778294] lowmem_reserve[]: 0 0 23451 23451 Mar 2 09:26:08 udknight kernel: [144766.778299] HighMem free:685676kB min:512kB low:3748kB high:6984kB active_anon:182832kB inactive_anon:1149556kB active_file:418544kB inactive_file:555932kB unevictable:2612kB isolated(anon):0kB isolated(file):0kB present:3001732kB managed:3001732kB mlocked:0kB dirty:0kB writeback:0kB mapped:17704kB shmem:1216964kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:75771152kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Mar 2 09:26:08 udknight kernel: [144766.778300] lowmem_reserve[]: 0 0 0 0 You can see bounce:75771152kB for HighMem, but bounce:0 for lowmem and global. This patch fix it. Signed-off-by: Wang YanQing Signed-off-by: Jens Axboe --- block/bounce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/bounce.c b/block/bounce.c index ab21ba203d5c..ed9dd8067120 100644 --- a/block/bounce.c +++ b/block/bounce.c @@ -221,8 +221,8 @@ bounce: if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force) continue; - inc_zone_page_state(to->bv_page, NR_BOUNCE); to->bv_page = mempool_alloc(pool, q->bounce_gfp); + inc_zone_page_state(to->bv_page, NR_BOUNCE); if (rw == WRITE) { char *vto, *vfrom; From c671835021798c1c40ca0b55b49feff76ed5e0e1 Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Sat, 25 Apr 2015 07:25:03 +0000 Subject: [PATCH 080/652] perf top: Fix a segfault when kernel map is restricted. Perf top raise a warning if a kernel sample is collected but kernel map is restricted. The warning message needs to dereference al.map->dso... However, previous perf_event__preprocess_sample() doesn't always guarantee al.map != NULL, for example, when kernel map is restricted. This patch validates al.map before dereferencing, avoid the segfault. Before this patch: $ cat /proc/sys/kernel/kptr_restrict 1 $ perf top -p 120183 perf: Segmentation fault -------- backtrace -------- /path/to/perf[0x509868] /lib64/libc.so.6(+0x3545f)[0x7f9a1540045f] /path/to/perf[0x448820] /path/to/perf(cmd_top+0xe3c)[0x44a5dc] /path/to/perf[0x4766a2] /path/to/perf(main+0x5f5)[0x42e545] /lib64/libc.so.6(__libc_start_main+0xf4)[0x7f9a153ecbd4] /path/to/perf[0x42e674] And gdb call trace: Program received signal SIGSEGV, Segmentation fault. perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 736 !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? (gdb) bt #0 perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 #1 perf_top__mmap_read_idx (top=top@entry=0x7fffffffa8a0, idx=idx@entry=0) at builtin-top.c:855 #2 0x000000000044a5dd in perf_top__mmap_read (top=0x7fffffffa8a0) at builtin-top.c:872 #3 __cmd_top (top=0x7fffffffa8a0) at builtin-top.c:997 #4 cmd_top (argc=, argv=, prefix=) at builtin-top.c:1267 #5 0x00000000004766a3 in run_builtin (p=p@entry=0x8a6ce8 , argc=argc@entry=3, argv=argv@entry=0x7fffffffdf70) at perf.c:371 #6 0x000000000042e546 in handle_internal_command (argv=0x7fffffffdf70, argc=3) at perf.c:430 #7 run_argv (argv=0x7fffffffdcf0, argcp=0x7fffffffdcfc) at perf.c:474 #8 main (argc=3, argv=0x7fffffffdf70) at perf.c:589 (gdb) Signed-off-by: Wang Nan Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Zefan Li Link: http://lkml.kernel.org/r/1429946703-80807-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 1cb3436276d1..6a4d5d41c671 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -733,7 +733,7 @@ static void perf_event__process_sample(struct perf_tool *tool, "Kernel address maps (/proc/{kallsyms,modules}) are restricted.\n\n" "Check /proc/sys/kernel/kptr_restrict.\n\n" "Kernel%s samples will not be resolved.\n", - !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? + al.map && !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? " modules" : ""); if (use_browser <= 0) sleep(5); From 6cd18e711dd8075da9d78cfc1239f912ff28968a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 27 Apr 2015 14:12:22 +1000 Subject: [PATCH 081/652] block: destroy bdi before blockdev is unregistered. Because of the peculiar way that md devices are created (automatically when the device node is opened), a new device can be created and registered immediately after the blk_unregister_region(disk_devt(disk), disk->minors); call in del_gendisk(). Therefore it is important that all visible artifacts of the previous device are removed before this call. In particular, the 'bdi'. Since: commit c4db59d31e39ea067c32163ac961e9c80198fd37 Author: Christoph Hellwig fs: don't reassign dirty inodes to default_backing_dev_info moved the device_unregister(bdi->dev); call from bdi_unregister() to bdi_destroy() it has been quite easy to lose a race and have a new (e.g.) "md127" be created after the blk_unregister_region() call and before bdi_destroy() is ultimately called by the final 'put_disk', which must come after del_gendisk(). The new device finds that the bdi name is already registered in sysfs and complains > [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70() > [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127' We can fix this by moving the bdi_destroy() call out of blk_release_queue() (which can happen very late when a refcount reaches zero) and into blk_cleanup_queue() - which happens exactly when the md device driver calls it. Then it is only necessary for md to call blk_cleanup_queue() before del_gendisk(). As loop.c devices are also created on demand by opening the device node, we make the same change there. Fixes: c4db59d31e39ea067c32163ac961e9c80198fd37 Reported-by: Azat Khuzhin Cc: Christoph Hellwig Cc: stable@vger.kernel.org (v4.0) Signed-off-by: NeilBrown Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 2 ++ block/blk-sysfs.c | 2 -- drivers/block/loop.c | 2 +- drivers/md/md.c | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index fd154b94447a..7871603f0a29 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -552,6 +552,8 @@ void blk_cleanup_queue(struct request_queue *q) q->queue_lock = &q->__queue_lock; spin_unlock_irq(lock); + bdi_destroy(&q->backing_dev_info); + /* @q is and will stay empty, shutdown and put */ blk_put_queue(q); } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index faaf36ade7eb..2b8fd302f677 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -522,8 +522,6 @@ static void blk_release_queue(struct kobject *kobj) blk_trace_shutdown(q); - bdi_destroy(&q->backing_dev_info); - ida_simple_remove(&blk_queue_ida, q->id); call_rcu(&q->rcu_head, blk_free_queue_rcu); } diff --git a/drivers/block/loop.c b/drivers/block/loop.c index ae3fcb4199e9..d7173cb1ea76 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1620,8 +1620,8 @@ out: static void loop_remove(struct loop_device *lo) { - del_gendisk(lo->lo_disk); blk_cleanup_queue(lo->lo_queue); + del_gendisk(lo->lo_disk); blk_mq_free_tag_set(&lo->tag_set); put_disk(lo->lo_disk); kfree(lo); diff --git a/drivers/md/md.c b/drivers/md/md.c index e6178787ce3d..e47d1dd046da 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4754,12 +4754,12 @@ static void md_free(struct kobject *ko) if (mddev->sysfs_state) sysfs_put(mddev->sysfs_state); + if (mddev->queue) + blk_cleanup_queue(mddev->queue); if (mddev->gendisk) { del_gendisk(mddev->gendisk); put_disk(mddev->gendisk); } - if (mddev->queue) - blk_cleanup_queue(mddev->queue); kfree(mddev); } From d13855ef18e1852b2c4dc86ddf5759c5b34628cb Mon Sep 17 00:00:00 2001 From: He Kuang Date: Sat, 25 Apr 2015 16:08:58 +0800 Subject: [PATCH 082/652] perf probe: Fix bug with global variables handling There are missing curly braces which causes find_variable() return wrong value when probing with global variables. This problem can be reproduced as following: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Try to find probe point from debuginfo. Probe point found: generic_perform_write+0 Searching 'global_variable_for_test' variable in context. An error occurred in debuginfo analysis (-2). Error: Failed to add events. Reason: No such file or directory (Code: -2) After this patch: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Converting variable global_variable_for_test into trace event. global_variable_for_test type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Added new event: Writing event: p:probe/generic_perform_write _stext+1237464 global_variable_for_test=@global_variable_for_test+0:s32 probe:generic_perform_write (on generic_perform_write with global_variable_for_test) You can now use it in all perf tools, such as: perf record -e probe:generic_perform_write -aR sleep 1 Signed-off-by: He Kuang Acked-by: Masami Hiramatsu Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Wang Nan Link: http://lkml.kernel.org/r/1429949338-18678-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-finder.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 44554c3c2220..1c3cc07937d5 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -578,10 +578,12 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf) /* Search child die for local variables and parameters. */ if (!die_find_variable_at(sc_die, pf->pvar->var, pf->addr, &vr_die)) { /* Search again in global variables */ - if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die)) + if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, + 0, &vr_die)) { pr_warning("Failed to find '%s' in this function.\n", pf->pvar->var); ret = -ENOENT; + } } if (ret >= 0) ret = convert_variable(&vr_die, pf); From 052b0f6eaf8b1f02669884a177bc3ce463133a42 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Fri, 24 Apr 2015 10:00:48 -0700 Subject: [PATCH 083/652] perf bench futex: Fix hung wakeup tasks after requeueing The futex-requeue benchmark can hang because of missing wakeups once the benchmark is done, ie: [Run 1]: Requeued 1024 of 1024 threads in 0.3290 ms perf: couldn't wakeup all tasks (135/1024) This bug, while perhaps suggesting missing wakeups in kernel futex code, is merely a consequence of the crappy FUTEX_CMP_REQUEUE man page, incorrectly mentioning that the number of requeued tasks is in fact returned, not the wakeups. This patch acknowledges this and updates the corresponding futex_wake code around it. Signed-off-by: Davidlohr Bueso Cc: Mel Gorman Link: http://lkml.kernel.org/r/1429894848.10273.44.camel@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/bench/futex-requeue.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/tools/perf/bench/futex-requeue.c b/tools/perf/bench/futex-requeue.c index bedff6b5b3cf..ad0d9b5342fb 100644 --- a/tools/perf/bench/futex-requeue.c +++ b/tools/perf/bench/futex-requeue.c @@ -132,6 +132,9 @@ int bench_futex_requeue(int argc, const char **argv, if (!fshared) futex_flag = FUTEX_PRIVATE_FLAG; + if (nrequeue > nthreads) + nrequeue = nthreads; + printf("Run summary [PID %d]: Requeuing %d threads (from [%s] %p to %p), " "%d at a time.\n\n", getpid(), nthreads, fshared ? "shared":"private", &futex1, &futex2, nrequeue); @@ -161,20 +164,18 @@ int bench_futex_requeue(int argc, const char **argv, /* Ok, all threads are patiently blocked, start requeueing */ gettimeofday(&start, NULL); - for (nrequeued = 0; nrequeued < nthreads; nrequeued += nrequeue) { + while (nrequeued < nthreads) { /* * Do not wakeup any tasks blocked on futex1, allowing * us to really measure futex_wait functionality. */ - futex_cmp_requeue(&futex1, 0, &futex2, 0, - nrequeue, futex_flag); + nrequeued += futex_cmp_requeue(&futex1, 0, &futex2, 0, + nrequeue, futex_flag); } + gettimeofday(&end, NULL); timersub(&end, &start, &runtime); - if (nrequeued > nthreads) - nrequeued = nthreads; - update_stats(&requeued_stats, nrequeued); update_stats(&requeuetime_stats, runtime.tv_usec); @@ -184,7 +185,7 @@ int bench_futex_requeue(int argc, const char **argv, } /* everybody should be blocked on futex2, wake'em up */ - nrequeued = futex_wake(&futex2, nthreads, futex_flag); + nrequeued = futex_wake(&futex2, nrequeued, futex_flag); if (nthreads != nrequeued) warnx("couldn't wakeup all tasks (%d/%d)", nrequeued, nthreads); From 24f1ced167e5e011040b4c3aae75aee45a79eed5 Mon Sep 17 00:00:00 2001 From: Petr Holasek Date: Thu, 16 Apr 2015 17:38:17 +0200 Subject: [PATCH 084/652] perf bench numa: Fixes of --quiet argument Corrected description and fixed function of --quiet argument. Signed-off-by: Petr Holasek Reviewed-by: Ingo Molnar Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1429198699-25039-2-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/bench/numa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index ebfa163b80b5..cd872e9c3a9c 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -180,7 +180,7 @@ static const struct option options[] = { OPT_INTEGER('H', "thp" , &p0.thp, "MADV_NOHUGEPAGE < 0 < MADV_HUGEPAGE"), OPT_BOOLEAN('c', "show_convergence", &p0.show_convergence, "show convergence details"), OPT_BOOLEAN('m', "measure_convergence", &p0.measure_convergence, "measure convergence latency"), - OPT_BOOLEAN('q', "quiet" , &p0.show_quiet, "bzero the initial allocations"), + OPT_BOOLEAN('q', "quiet" , &p0.show_quiet, "quiet mode"), OPT_BOOLEAN('S', "serialize-startup", &p0.serialize_startup,"serialize thread startup"), /* Special option string parsing callbacks: */ @@ -1395,7 +1395,7 @@ static void print_res(const char *name, double val, if (!name) name = "main,"; - if (g->p.show_quiet) + if (!g->p.show_quiet) printf(" %-30s %15.3f, %-15s %s\n", name, val, txt_unit, txt_short); else printf(" %14.3f %s\n", val, txt_long); From 1d90a685eb75a56648d7dd22c704a1a6da516de9 Mon Sep 17 00:00:00 2001 From: Petr Holasek Date: Thu, 16 Apr 2015 17:38:19 +0200 Subject: [PATCH 085/652] perf bench numa: Fix immediate meeting of convergence condition This patch fixes the race in the beginning of benchmark run when some threads hasn't got assigned curr_cpu yet so they don't occur in nodes-of-process stats and benchmark concludes that all remaining threads are converged already. The race can be reproduced with small amount of threads and some bigger amount of shared process memory, e.g. one process, two threads and 5GB of process memory. Signed-off-by: Petr Holasek Reviewed-by: Ingo Molnar Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1429198699-25039-4-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/bench/numa.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index cd872e9c3a9c..ba5efa4710b5 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -828,6 +828,9 @@ static int count_process_nodes(int process_nr) td = g->threads + task_nr; node = numa_node_of_cpu(td->curr_cpu); + if (node < 0) /* curr_cpu was likely still -1 */ + return 0; + node_present[node] = 1; } @@ -882,6 +885,11 @@ static void calc_convergence_compression(int *strong) for (p = 0; p < g->p.nr_proc; p++) { unsigned int nodes = count_process_nodes(p); + if (!nodes) { + *strong = 0; + return; + } + nodes_min = min(nodes, nodes_min); nodes_max = max(nodes, nodes_max); } From 2a700d8edffdbfb8200332d96c3147e042b337f1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 13 Apr 2015 11:18:51 -0300 Subject: [PATCH 086/652] [media] marvell-ccic: fix Y'CbCr ordering Various formats had their byte ordering implemented incorrectly, and the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you get V4L2_PIX_FMT_YVYU. This was working before commit ad6ac452227b7cb93ac79beec092850d178740b1 ("add new formats support for marvell-ccic driver"). That commit broke the original format support and the OLPC XO-1 laptop showed wrong colors ever since (if you are crazy enough to attempt to run the latest kernel on it, like I did). The email addresses of the authors of that patch are no longer valid, so without a way to reach them and ask them about their test setup I am going with what I can test on the OLPC laptop. If this breaks something for someone on their non-OLPC setup, then contact the linux-media mailinglist. My suspicion however is that that commit went in untested. Signed-off-by: Hans Verkuil Acked-by: Jonathan Corbet Cc: # for v3.19 and up Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/marvell-ccic/mcam-core.c | 14 +++++++------- drivers/media/platform/marvell-ccic/mcam-core.h | 8 ++++---- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index 9c64b5d01c6a..110fd70c7326 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -116,8 +116,8 @@ static struct mcam_format_struct { .planar = false, }, { - .desc = "UYVY 4:2:2", - .pixelformat = V4L2_PIX_FMT_UYVY, + .desc = "YVYU 4:2:2", + .pixelformat = V4L2_PIX_FMT_YVYU, .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, .bpp = 2, .planar = false, @@ -748,7 +748,7 @@ static void mcam_ctlr_image(struct mcam_camera *cam) switch (fmt->pixelformat) { case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: widthy = fmt->width * 2; widthuv = 0; break; @@ -784,15 +784,15 @@ static void mcam_ctlr_image(struct mcam_camera *cam) case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YVU420: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK); + C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK); break; case V4L2_PIX_FMT_YUYV: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK); + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK); break; - case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK); + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK); break; case V4L2_PIX_FMT_JPEG: mcam_reg_write_mask(cam, REG_CTRL0, diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h index aa0c6eac254a..7ffdf4dbaf8c 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.h +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -330,10 +330,10 @@ int mccic_resume(struct mcam_camera *cam); #define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ #define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ #define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ -#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ -#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ -#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ -#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ +#define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */ +#define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */ +#define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */ +#define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */ /* Bayer bits 18,19 if needed */ #define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */ #define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */ From 5a9b06a27db6b006605421658418fb8943a6e217 Mon Sep 17 00:00:00 2001 From: Koji Matsuoka Date: Sun, 29 Mar 2015 10:04:56 -0300 Subject: [PATCH 087/652] [media] media: soc_camera: rcar_vin: Fix wait_for_completion When stopping abnormally, a driver can't return from wait_for_completion. This patch resolved this problem by changing wait_for_completion_timeout from wait_for_completion. Signed-off-by: Koji Matsuoka Signed-off-by: Yoshihiro Kaneko Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/rcar_vin.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c index 9351f64dee7b..6460f8e1b07f 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -135,6 +135,8 @@ #define VIN_MAX_WIDTH 2048 #define VIN_MAX_HEIGHT 2048 +#define TIMEOUT_MS 100 + enum chip_id { RCAR_GEN2, RCAR_H1, @@ -820,7 +822,10 @@ static void rcar_vin_wait_stop_streaming(struct rcar_vin_priv *priv) if (priv->state == STOPPING) { priv->request_to_stop = true; spin_unlock_irq(&priv->lock); - wait_for_completion(&priv->capture_stop); + if (!wait_for_completion_timeout( + &priv->capture_stop, + msecs_to_jiffies(TIMEOUT_MS))) + priv->state = STOPPED; spin_lock_irq(&priv->lock); } } From 228321904089b166a034711dd4f94dc657b39227 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 24 Mar 2015 15:08:49 -0500 Subject: [PATCH 088/652] usb: dwc3: dwc3-omap: correct the register macros The macros related to register UTMI_OTG_CTRL and UTMI_OTG_STATUS are swapped. Correct them for readability. Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-omap.c | 94 ++++++++++++++++++------------------ 1 file changed, 47 insertions(+), 47 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index edba5348be18..6b486a36863c 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -65,8 +65,8 @@ #define USBOTGSS_IRQENABLE_SET_MISC 0x003c #define USBOTGSS_IRQENABLE_CLR_MISC 0x0040 #define USBOTGSS_IRQMISC_OFFSET 0x03fc -#define USBOTGSS_UTMI_OTG_CTRL 0x0080 -#define USBOTGSS_UTMI_OTG_STATUS 0x0084 +#define USBOTGSS_UTMI_OTG_STATUS 0x0080 +#define USBOTGSS_UTMI_OTG_CTRL 0x0084 #define USBOTGSS_UTMI_OTG_OFFSET 0x0480 #define USBOTGSS_TXFIFO_DEPTH 0x0508 #define USBOTGSS_RXFIFO_DEPTH 0x050c @@ -98,20 +98,20 @@ #define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3) #define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0) -/* UTMI_OTG_CTRL REGISTER */ -#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) -#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) -#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) -#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) - /* UTMI_OTG_STATUS REGISTER */ -#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) -#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) -#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) -#define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) -#define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) -#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) -#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) +#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS (1 << 5) +#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS (1 << 4) +#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS (1 << 3) +#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP (1 << 0) + +/* UTMI_OTG_CTRL REGISTER */ +#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE (1 << 31) +#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT (1 << 9) +#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE (1 << 8) +#define USBOTGSS_UTMI_OTG_CTRL_IDDIG (1 << 4) +#define USBOTGSS_UTMI_OTG_CTRL_SESSEND (1 << 3) +#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID (1 << 2) +#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID (1 << 1) struct dwc3_omap { struct device *dev; @@ -119,7 +119,7 @@ struct dwc3_omap { int irq; void __iomem *base; - u32 utmi_otg_status; + u32 utmi_otg_ctrl; u32 utmi_otg_offset; u32 irqmisc_offset; u32 irq_eoi_offset; @@ -153,15 +153,15 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offset); } -static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap) +static u32 dwc3_omap_read_utmi_ctrl(struct dwc3_omap *omap) { - return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS + + return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_CTRL + omap->utmi_otg_offset); } -static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value) +static void dwc3_omap_write_utmi_ctrl(struct dwc3_omap *omap, u32 value) { - dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS + + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_CTRL + omap->utmi_otg_offset, value); } @@ -235,25 +235,25 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, } } - val = dwc3_omap_read_utmi_status(omap); - val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG - | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID - | USBOTGSS_UTMI_OTG_STATUS_SESSEND); - val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID - | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; - dwc3_omap_write_utmi_status(omap, val); + val = dwc3_omap_read_utmi_ctrl(omap); + val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID + | USBOTGSS_UTMI_OTG_CTRL_SESSEND); + val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID + | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + dwc3_omap_write_utmi_ctrl(omap, val); break; case OMAP_DWC3_VBUS_VALID: dev_dbg(omap->dev, "VBUS Connect\n"); - val = dwc3_omap_read_utmi_status(omap); - val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND; - val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG - | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID - | USBOTGSS_UTMI_OTG_STATUS_SESSVALID - | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; - dwc3_omap_write_utmi_status(omap, val); + val = dwc3_omap_read_utmi_ctrl(omap); + val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND; + val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID + | USBOTGSS_UTMI_OTG_CTRL_SESSVALID + | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + dwc3_omap_write_utmi_ctrl(omap, val); break; case OMAP_DWC3_ID_FLOAT: @@ -263,13 +263,13 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, case OMAP_DWC3_VBUS_OFF: dev_dbg(omap->dev, "VBUS Disconnect\n"); - val = dwc3_omap_read_utmi_status(omap); - val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID - | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID - | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT); - val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND - | USBOTGSS_UTMI_OTG_STATUS_IDDIG; - dwc3_omap_write_utmi_status(omap, val); + val = dwc3_omap_read_utmi_ctrl(omap); + val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID + | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT); + val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND + | USBOTGSS_UTMI_OTG_CTRL_IDDIG; + dwc3_omap_write_utmi_ctrl(omap, val); break; default: @@ -422,22 +422,22 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap) struct device_node *node = omap->dev->of_node; int utmi_mode = 0; - reg = dwc3_omap_read_utmi_status(omap); + reg = dwc3_omap_read_utmi_ctrl(omap); of_property_read_u32(node, "utmi-mode", &utmi_mode); switch (utmi_mode) { case DWC3_OMAP_UTMI_MODE_SW: - reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + reg |= USBOTGSS_UTMI_OTG_CTRL_SW_MODE; break; case DWC3_OMAP_UTMI_MODE_HW: - reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + reg &= ~USBOTGSS_UTMI_OTG_CTRL_SW_MODE; break; default: dev_dbg(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode); } - dwc3_omap_write_utmi_status(omap, reg); + dwc3_omap_write_utmi_ctrl(omap, reg); } static int dwc3_omap_extcon_register(struct dwc3_omap *omap) @@ -614,7 +614,7 @@ static int dwc3_omap_suspend(struct device *dev) { struct dwc3_omap *omap = dev_get_drvdata(dev); - omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap); + omap->utmi_otg_ctrl = dwc3_omap_read_utmi_ctrl(omap); dwc3_omap_disable_irqs(omap); return 0; @@ -624,7 +624,7 @@ static int dwc3_omap_resume(struct device *dev) { struct dwc3_omap *omap = dev_get_drvdata(dev); - dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status); + dwc3_omap_write_utmi_ctrl(omap, omap->utmi_otg_ctrl); dwc3_omap_enable_irqs(omap); pm_runtime_disable(dev); From 49bce159fb3750eaf586c0b583a4930ca9db0d9c Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Sun, 29 Mar 2015 05:43:22 +0300 Subject: [PATCH 089/652] usb: gadget: xilinx: fix devm_ioremap_resource() check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit devm_ioremap_resource() returns IOMEM_ERR_PTR() and it never returns NULL, fix the check to prevent access to invalid virtual address. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sören Brinkmann Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/udc-xilinx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index dd3e9fd31b80..1f24274477ab 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -2071,8 +2071,8 @@ static int xudc_probe(struct platform_device *pdev) /* Map the registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); udc->addr = devm_ioremap_resource(&pdev->dev, res); - if (!udc->addr) - return -ENOMEM; + if (IS_ERR(udc->addr)) + return PTR_ERR(udc->addr); irq = platform_get_irq(pdev, 0); if (irq < 0) { From 903124fe1aa284f61745a9dd4fbfa0184e569fff Mon Sep 17 00:00:00 2001 From: Krzysztof Opasiak Date: Fri, 20 Mar 2015 15:48:56 +0100 Subject: [PATCH 090/652] usb: gadget: configfs: Fix interfaces array NULL-termination memset() to 0 interfaces array before reusing usb_configuration structure. This commit fix bug: ln -s functions/acm.1 configs/c.1 ln -s functions/acm.2 configs/c.1 ln -s functions/acm.3 configs/c.1 echo "UDC name" > UDC echo "" > UDC rm configs/c.1/acm.* rmdir functions/* mkdir functions/ecm.usb0 ln -s functions/ecm.usb0 configs/c.1 echo "UDC name" > UDC [ 82.220969] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 82.229009] pgd = c0004000 [ 82.231698] [00000000] *pgd=00000000 [ 82.235260] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 82.240638] Modules linked in: [ 82.243681] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-rc2 #39 [ 82.249926] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.256003] task: c07cd2f0 ti: c07c8000 task.ti: c07c8000 [ 82.261393] PC is at composite_setup+0xe3c/0x1674 [ 82.266073] LR is at composite_setup+0xf20/0x1674 [ 82.270760] pc : [] lr : [] psr: 600001d3 [ 82.270760] sp : c07c9df0 ip : c0806448 fp : ed8c9c9c [ 82.282216] r10: 00000001 r9 : 00000000 r8 : edaae918 [ 82.287425] r7 : ed551cc0 r6 : 00007fff r5 : 00000000 r4 : ed799634 [ 82.293934] r3 : 00000003 r2 : 00010002 r1 : edaae918 r0 : 0000002e [ 82.300446] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 82.307910] Control: 10c5387d Table: 6bc1804a DAC: 00000015 [ 82.313638] Process swapper/0 (pid: 0, stack limit = 0xc07c8210) [ 82.319627] Stack: (0xc07c9df0 to 0xc07ca000) [ 82.323969] 9de0: 00000000 c06e65f4 00000000 c07c9f68 [ 82.332130] 9e00: 00000067 c07c59ac 000003f7 edaae918 ed8c9c98 ed799690 eca2f140 200001d3 [ 82.340289] 9e20: ee79a2d8 c07c9e88 c07c5304 ffff55db 00010002 edaae810 edaae860 eda96d50 [ 82.348448] 9e40: 00000009 ee264510 00000007 c07ca444 edaae860 c0340890 c0827a40 ffff55e0 [ 82.356607] 9e60: c0827a40 eda96e40 ee264510 edaae810 00000000 edaae860 00000007 c07ca444 [ 82.364766] 9e80: edaae860 c0354170 c03407dc c033db4c edaae810 00000000 00000000 00000010 [ 82.372925] 9ea0: 00000032 c0341670 00000000 00000000 00000001 eda96e00 00000000 00000000 [ 82.381084] 9ec0: 00000000 00000032 c0803a23 ee1aa840 00000001 c005d54c 249e2450 00000000 [ 82.389244] 9ee0: 200001d3 ee1aa840 ee1aa8a0 ed84f4c0 00000000 c07c9f68 00000067 c07c59ac [ 82.397403] 9f00: 00000000 c005d688 ee1aa840 ee1aa8a0 c07db4b4 c006009c 00000032 00000000 [ 82.405562] 9f20: 00000001 c005ce20 c07c59ac c005cf34 f002000c c07ca780 c07c9f68 00000057 [ 82.413722] 9f40: f0020000 413fc090 00000001 c00086b4 c000f804 60000053 ffffffff c07c9f9c [ 82.421880] 9f60: c0803a20 c0011fc0 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.430040] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.438199] 9fa0: c000f800 c000f804 60000053 ffffffff 00000000 c0050e70 c0803bc0 c0783bd8 [ 82.446358] 9fc0: ffffffff ffffffff c0783664 00000000 00000000 c07b13e8 00000000 c0803e54 [ 82.454517] 9fe0: c07ca480 c07b13e4 c07ce40c 4000406a 00000000 40008074 00000000 00000000 [ 82.462689] [] (composite_setup) from [] (s3c_hsotg_complete_setup+0xb4/0x418) [ 82.471626] [] (s3c_hsotg_complete_setup) from [] (usb_gadget_giveback_request+0xc/0x10) [ 82.481429] [] (usb_gadget_giveback_request) from [] (s3c_hsotg_complete_request+0xcc/0x12c) [ 82.491583] [] (s3c_hsotg_complete_request) from [] (s3c_hsotg_irq+0x4fc/0x558) [ 82.500614] [] (s3c_hsotg_irq) from [] (handle_irq_event_percpu+0x50/0x150) [ 82.509291] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 82.518145] [] (handle_irq_event) from [] (handle_fasteoi_irq+0xd4/0x18c) [ 82.526650] [] (handle_fasteoi_irq) from [] (generic_handle_irq+0x20/0x30) [ 82.535242] [] (generic_handle_irq) from [] (__handle_domain_irq+0x6c/0xdc) [ 82.543923] [] (__handle_domain_irq) from [] (gic_handle_irq+0x2c/0x6c) [ 82.552256] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 82.559716] Exception stack(0xc07c9f68 to 0xc07c9fb0) [ 82.564753] 9f60: 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.572913] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.581069] 9fa0: c000f800 c000f804 60000053 ffffffff [ 82.586113] [] (__irq_svc) from [] (arch_cpu_idle+0x30/0x3c) [ 82.593491] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x128/0x1a4) [ 82.601740] [] (cpu_startup_entry) from [] (start_kernel+0x350/0x3bc) [ 82.609890] Code: 0a000002 e3530005 05975010 15975008 (e5953000) [ 82.615965] ---[ end trace f57d5f599a5f1bfa ]--- Most of kernel code assume that interface array in struct usb_configuration is NULL terminated. When gadget is composed with configfs configuration structure may be reused for different functions set. This bug happens because purge_configs_funcs() sets only next_interface_id to 0. Interface array still contains pointers to already freed interfaces. If in second try we add less interfaces than earlier we may access unallocated memory when trying to get interface descriptors. Signed-off-by: Krzysztof Opasiak Cc: # 3.10+ Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index c42765b3a060..0495c94a23d7 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1295,6 +1295,7 @@ static void purge_configs_funcs(struct gadget_info *gi) } } c->next_interface_id = 0; + memset(c->interface, 0, sizeof(c->interface)); c->superspeed = 0; c->highspeed = 0; c->fullspeed = 0; From f286d487e9283a42a8844659bb5552b3f1bf6a7d Mon Sep 17 00:00:00 2001 From: Krzysztof Opasiak Date: Fri, 27 Mar 2015 09:35:44 +0100 Subject: [PATCH 091/652] usb: gadget: hid: Fix static variable usage If we have multiple instances of hid function, each of them may have different report descriptor, also their length may be different. Currently we are using static hidg_desc varable which is being filled in hidg_bind(). Then we send its content to host in hidg_setup() function. This content may have been already overwriten if another instance has executed hidg_bind(). Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_hid.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 13dfc9915b1d..f7f35a36c09a 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -437,12 +437,20 @@ static int hidg_setup(struct usb_function *f, | USB_REQ_GET_DESCRIPTOR): switch (value >> 8) { case HID_DT_HID: + { + struct hid_descriptor hidg_desc_copy = hidg_desc; + VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: HID\n"); + hidg_desc_copy.desc[0].bDescriptorType = HID_DT_REPORT; + hidg_desc_copy.desc[0].wDescriptorLength = + cpu_to_le16(hidg->report_desc_length); + length = min_t(unsigned short, length, - hidg_desc.bLength); - memcpy(req->buf, &hidg_desc, length); + hidg_desc_copy.bLength); + memcpy(req->buf, &hidg_desc_copy, length); goto respond; break; + } case HID_DT_REPORT: VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: REPORT\n"); length = min_t(unsigned short, length, @@ -632,6 +640,10 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f) hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); hidg_fs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); + /* + * We can use hidg_desc struct here but we should not relay + * that its content won't change after returning from this function. + */ hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT; hidg_desc.desc[0].wDescriptorLength = cpu_to_le16(hidg->report_desc_length); From 3e9d3d2efc677b501b12512cab5adb4f32a0673a Mon Sep 17 00:00:00 2001 From: Philip Oberstaller Date: Fri, 27 Mar 2015 17:42:18 +0100 Subject: [PATCH 092/652] usb: gadget: serial: fix re-ordering of tx data When a single thread is sending out data over the gadget serial port, gs_start_tx() will be called both from the sender context and from the write completion. Since the port lock is released before the packet is queued, the order in which the URBs are submitted is not guaranteed. E.g. sending thread completion (interrupt) gs_write() LOCK gs_write_complete() LOCK (wait) gs_start_tx() req1 = list_entry(pool->next) UNLOCK LOCK (acquired) gs_start_tx() req2 = list_entry(pool->next) UNLOCK usb_ep_queue(req2) usb_ep_queue(req1) I.e., req2 is submitted before req1 but it contains the data that comes after req1. To reproduce, use SMP with sending thread and completion pinned to different CPUs, or use PREEMPT_RT, and add the following delay just before the call to usb_ep_queue(): if (port->write_started > 0 && !list_empty(pool)) udelay(1000); To work around this problem, make sure that only one thread is running through the gs_start_tx() loop with an extra flag write_busy. Since gs_start_tx() is always called with the port lock held, no further synchronisation is needed. The original caller will continue through the loop when the request was successfully submitted. Signed-off-by: Philip Oberstaller Signed-off-by: Arnout Vandecappelle (Essensium/Mind) Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_serial.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 89179ab20c10..7ee057930ae7 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -113,6 +113,7 @@ struct gs_port { int write_allocated; struct gs_buf port_write_buf; wait_queue_head_t drain_wait; /* wait while writes drain */ + bool write_busy; /* REVISIT this state ... */ struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ @@ -363,7 +364,7 @@ __acquires(&port->port_lock) int status = 0; bool do_tty_wake = false; - while (!list_empty(pool)) { + while (!port->write_busy && !list_empty(pool)) { struct usb_request *req; int len; @@ -393,9 +394,11 @@ __acquires(&port->port_lock) * NOTE that we may keep sending data for a while after * the TTY closed (dev->ioport->port_tty is NULL). */ + port->write_busy = true; spin_unlock(&port->port_lock); status = usb_ep_queue(in, req, GFP_ATOMIC); spin_lock(&port->port_lock); + port->write_busy = false; if (status) { pr_debug("%s: %s %s err %d\n", From 197d0bdf8b0168d69c400d3936d08066ab1499a7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 11 Apr 2015 00:06:10 +0200 Subject: [PATCH 093/652] usb: phy: isp1301: work around tps65010 dependency The isp1301-omap driver contains special hooks for the TPS65010 power management controller. It provides its own 'tps65010_set_vbus_draw' wrapper in case that driver is not enabled through Kconfig, but fails to handle the case where isp1301-omap is built-in but TPS65010 is a loadable module, which currently results in a link error: drivers/built-in.o: In function `isp1301_set_power': :(.text+0x14e188): undefined reference to `tps65010_set_vbus_draw' This is a workaround to use the same trick as before also when tps65010 is a module. Doing a proper fix would require much larger changes to the driver that is not really worth it when the usb-phy drivers are going to eventually get replaced with generic-phy drivers. Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-isp1301-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c index 1e0e10dd6ba5..3af263cc0caa 100644 --- a/drivers/usb/phy/phy-isp1301-omap.c +++ b/drivers/usb/phy/phy-isp1301-omap.c @@ -94,7 +94,7 @@ struct isp1301 { #if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) -#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) +#if defined(CONFIG_TPS65010) || (defined(CONFIG_TPS65010_MODULE) && defined(MODULE)) #include From c94e289f195e0e13cf34d27f9338d28221a85751 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 11 Apr 2015 00:14:21 +0200 Subject: [PATCH 094/652] usb: gadget: remove incorrect __init/__exit annotations A recent change introduced a link error for the composite printer gadget driver: `printer_unbind' referenced in section `.ref.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o Evidently the unbind function should not be marked __exit here, because it is called through a callback pointer that is not necessarily discarded, __composite_unbind() is indeed called from the error path of composite_bind(), which can never work for a built-in driver. Looking at the surrounding code, I found the same problem in all other composite gadget drivers in both the bind and unbind functions, as well as the udc platform driver 'remove' functions. Those will break if anyone uses the 'unbind' sysfs attribute to detach a device from a built-in driver. This patch removes the incorrect annotations from all the gadget drivers. Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/acm_ms.c | 10 +++++----- drivers/usb/gadget/legacy/audio.c | 10 +++++----- drivers/usb/gadget/legacy/cdc2.c | 10 +++++----- drivers/usb/gadget/legacy/dbgp.c | 4 ++-- drivers/usb/gadget/legacy/ether.c | 12 ++++++------ drivers/usb/gadget/legacy/g_ffs.c | 2 +- drivers/usb/gadget/legacy/gmidi.c | 10 +++++----- drivers/usb/gadget/legacy/hid.c | 12 ++++++------ drivers/usb/gadget/legacy/mass_storage.c | 6 +++--- drivers/usb/gadget/legacy/multi.c | 10 +++++----- drivers/usb/gadget/legacy/ncm.c | 10 +++++----- drivers/usb/gadget/legacy/nokia.c | 10 +++++----- drivers/usb/gadget/legacy/printer.c | 8 ++++---- drivers/usb/gadget/legacy/serial.c | 4 ++-- drivers/usb/gadget/legacy/tcm_usb_gadget.c | 2 +- drivers/usb/gadget/legacy/webcam.c | 8 ++++---- drivers/usb/gadget/legacy/zero.c | 4 ++-- drivers/usb/gadget/udc/at91_udc.c | 4 ++-- drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++-- drivers/usb/gadget/udc/fsl_udc_core.c | 4 ++-- drivers/usb/gadget/udc/fusb300_udc.c | 4 ++-- drivers/usb/gadget/udc/m66592-udc.c | 4 ++-- drivers/usb/gadget/udc/r8a66597-udc.c | 4 ++-- 23 files changed, 78 insertions(+), 78 deletions(-) diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c index c30b7b572465..1194b09ae746 100644 --- a/drivers/usb/gadget/legacy/acm_ms.c +++ b/drivers/usb/gadget/legacy/acm_ms.c @@ -121,7 +121,7 @@ static struct usb_function *f_msg; /* * We _always_ have both ACM and mass storage functions. */ -static int __init acm_ms_do_config(struct usb_configuration *c) +static int acm_ms_do_config(struct usb_configuration *c) { struct fsg_opts *opts; int status; @@ -174,7 +174,7 @@ static struct usb_configuration acm_ms_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init acm_ms_bind(struct usb_composite_dev *cdev) +static int acm_ms_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct fsg_opts *opts; @@ -249,7 +249,7 @@ fail_get_msg: return status; } -static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) +static int acm_ms_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_msg); usb_put_function_instance(fi_msg); @@ -258,13 +258,13 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver acm_ms_driver = { +static struct usb_composite_driver acm_ms_driver = { .name = "g_acm_ms", .dev = &device_desc, .max_speed = USB_SPEED_SUPER, .strings = dev_strings, .bind = acm_ms_bind, - .unbind = __exit_p(acm_ms_unbind), + .unbind = acm_ms_unbind, }; module_usb_composite_driver(acm_ms_driver); diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c index f46a3956e43d..f289caf18a45 100644 --- a/drivers/usb/gadget/legacy/audio.c +++ b/drivers/usb/gadget/legacy/audio.c @@ -167,7 +167,7 @@ static const struct usb_descriptor_header *otg_desc[] = { /*-------------------------------------------------------------------------*/ -static int __init audio_do_config(struct usb_configuration *c) +static int audio_do_config(struct usb_configuration *c) { int status; @@ -216,7 +216,7 @@ static struct usb_configuration audio_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init audio_bind(struct usb_composite_dev *cdev) +static int audio_bind(struct usb_composite_dev *cdev) { #ifndef CONFIG_GADGET_UAC1 struct f_uac2_opts *uac2_opts; @@ -276,7 +276,7 @@ fail: return status; } -static int __exit audio_unbind(struct usb_composite_dev *cdev) +static int audio_unbind(struct usb_composite_dev *cdev) { #ifdef CONFIG_GADGET_UAC1 if (!IS_ERR_OR_NULL(f_uac1)) @@ -292,13 +292,13 @@ static int __exit audio_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver audio_driver = { +static struct usb_composite_driver audio_driver = { .name = "g_audio", .dev = &device_desc, .strings = audio_strings, .max_speed = USB_SPEED_HIGH, .bind = audio_bind, - .unbind = __exit_p(audio_unbind), + .unbind = audio_unbind, }; module_usb_composite_driver(audio_driver); diff --git a/drivers/usb/gadget/legacy/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c index 2e85d9473478..afd3e37921a7 100644 --- a/drivers/usb/gadget/legacy/cdc2.c +++ b/drivers/usb/gadget/legacy/cdc2.c @@ -104,7 +104,7 @@ static struct usb_function_instance *fi_ecm; /* * We _always_ have both CDC ECM and CDC ACM functions. */ -static int __init cdc_do_config(struct usb_configuration *c) +static int cdc_do_config(struct usb_configuration *c) { int status; @@ -153,7 +153,7 @@ static struct usb_configuration cdc_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init cdc_bind(struct usb_composite_dev *cdev) +static int cdc_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct f_ecm_opts *ecm_opts; @@ -211,7 +211,7 @@ fail: return status; } -static int __exit cdc_unbind(struct usb_composite_dev *cdev) +static int cdc_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_acm); usb_put_function_instance(fi_serial); @@ -222,13 +222,13 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver cdc_driver = { +static struct usb_composite_driver cdc_driver = { .name = "g_cdc", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = cdc_bind, - .unbind = __exit_p(cdc_unbind), + .unbind = cdc_unbind, }; module_usb_composite_driver(cdc_driver); diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c index 633683a72a11..204b10b1a7e7 100644 --- a/drivers/usb/gadget/legacy/dbgp.c +++ b/drivers/usb/gadget/legacy/dbgp.c @@ -284,7 +284,7 @@ fail_1: return -ENODEV; } -static int __init dbgp_bind(struct usb_gadget *gadget, +static int dbgp_bind(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { int err, stp; @@ -406,7 +406,7 @@ fail: return err; } -static __refdata struct usb_gadget_driver dbgp_driver = { +static struct usb_gadget_driver dbgp_driver = { .function = "dbgp", .max_speed = USB_SPEED_HIGH, .bind = dbgp_bind, diff --git a/drivers/usb/gadget/legacy/ether.c b/drivers/usb/gadget/legacy/ether.c index c5fdc61cdc4a..a3323dca218f 100644 --- a/drivers/usb/gadget/legacy/ether.c +++ b/drivers/usb/gadget/legacy/ether.c @@ -222,7 +222,7 @@ static struct usb_function *f_rndis; * the first one present. That's to make Microsoft's drivers happy, * and to follow DOCSIS 1.0 (cable modem standard). */ -static int __init rndis_do_config(struct usb_configuration *c) +static int rndis_do_config(struct usb_configuration *c) { int status; @@ -264,7 +264,7 @@ MODULE_PARM_DESC(use_eem, "use CDC EEM mode"); /* * We _always_ have an ECM, CDC Subset, or EEM configuration. */ -static int __init eth_do_config(struct usb_configuration *c) +static int eth_do_config(struct usb_configuration *c) { int status = 0; @@ -318,7 +318,7 @@ static struct usb_configuration eth_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init eth_bind(struct usb_composite_dev *cdev) +static int eth_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct f_eem_opts *eem_opts = NULL; @@ -447,7 +447,7 @@ fail: return status; } -static int __exit eth_unbind(struct usb_composite_dev *cdev) +static int eth_unbind(struct usb_composite_dev *cdev) { if (has_rndis()) { usb_put_function(f_rndis); @@ -466,13 +466,13 @@ static int __exit eth_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver eth_driver = { +static struct usb_composite_driver eth_driver = { .name = "g_ether", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, .bind = eth_bind, - .unbind = __exit_p(eth_unbind), + .unbind = eth_unbind, }; module_usb_composite_driver(eth_driver); diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c index b01b88e1b716..7b9ef7e257d2 100644 --- a/drivers/usb/gadget/legacy/g_ffs.c +++ b/drivers/usb/gadget/legacy/g_ffs.c @@ -163,7 +163,7 @@ static int gfs_unbind(struct usb_composite_dev *cdev); static int gfs_do_config(struct usb_configuration *c); -static __refdata struct usb_composite_driver gfs_driver = { +static struct usb_composite_driver gfs_driver = { .name = DRIVER_NAME, .dev = &gfs_dev_desc, .strings = gfs_dev_strings, diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c index e02a095294ac..da19c486b61e 100644 --- a/drivers/usb/gadget/legacy/gmidi.c +++ b/drivers/usb/gadget/legacy/gmidi.c @@ -118,7 +118,7 @@ static struct usb_gadget_strings *dev_strings[] = { static struct usb_function_instance *fi_midi; static struct usb_function *f_midi; -static int __exit midi_unbind(struct usb_composite_dev *dev) +static int midi_unbind(struct usb_composite_dev *dev) { usb_put_function(f_midi); usb_put_function_instance(fi_midi); @@ -133,7 +133,7 @@ static struct usb_configuration midi_config = { .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW, }; -static int __init midi_bind_config(struct usb_configuration *c) +static int midi_bind_config(struct usb_configuration *c) { int status; @@ -150,7 +150,7 @@ static int __init midi_bind_config(struct usb_configuration *c) return 0; } -static int __init midi_bind(struct usb_composite_dev *cdev) +static int midi_bind(struct usb_composite_dev *cdev) { struct f_midi_opts *midi_opts; int status; @@ -185,13 +185,13 @@ put: return status; } -static __refdata struct usb_composite_driver midi_driver = { +static struct usb_composite_driver midi_driver = { .name = (char *) longname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = midi_bind, - .unbind = __exit_p(midi_unbind), + .unbind = midi_unbind, }; module_usb_composite_driver(midi_driver); diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c index 614b06d80b41..2baa572686c6 100644 --- a/drivers/usb/gadget/legacy/hid.c +++ b/drivers/usb/gadget/legacy/hid.c @@ -106,7 +106,7 @@ static struct usb_gadget_strings *dev_strings[] = { /****************************** Configurations ******************************/ -static int __init do_config(struct usb_configuration *c) +static int do_config(struct usb_configuration *c) { struct hidg_func_node *e, *n; int status = 0; @@ -147,7 +147,7 @@ static struct usb_configuration config_driver = { /****************************** Gadget Bind ******************************/ -static int __init hid_bind(struct usb_composite_dev *cdev) +static int hid_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct list_head *tmp; @@ -205,7 +205,7 @@ put: return status; } -static int __exit hid_unbind(struct usb_composite_dev *cdev) +static int hid_unbind(struct usb_composite_dev *cdev) { struct hidg_func_node *n; @@ -216,7 +216,7 @@ static int __exit hid_unbind(struct usb_composite_dev *cdev) return 0; } -static int __init hidg_plat_driver_probe(struct platform_device *pdev) +static int hidg_plat_driver_probe(struct platform_device *pdev) { struct hidg_func_descriptor *func = dev_get_platdata(&pdev->dev); struct hidg_func_node *entry; @@ -252,13 +252,13 @@ static int hidg_plat_driver_remove(struct platform_device *pdev) /****************************** Some noise ******************************/ -static __refdata struct usb_composite_driver hidg_driver = { +static struct usb_composite_driver hidg_driver = { .name = "g_hid", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = hid_bind, - .unbind = __exit_p(hid_unbind), + .unbind = hid_unbind, }; static struct platform_driver hidg_plat_driver = { diff --git a/drivers/usb/gadget/legacy/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c index 8e27a8c96444..e7bfb081f111 100644 --- a/drivers/usb/gadget/legacy/mass_storage.c +++ b/drivers/usb/gadget/legacy/mass_storage.c @@ -130,7 +130,7 @@ static int msg_thread_exits(struct fsg_common *common) return 0; } -static int __init msg_do_config(struct usb_configuration *c) +static int msg_do_config(struct usb_configuration *c) { struct fsg_opts *opts; int ret; @@ -170,7 +170,7 @@ static struct usb_configuration msg_config_driver = { /****************************** Gadget Bind ******************************/ -static int __init msg_bind(struct usb_composite_dev *cdev) +static int msg_bind(struct usb_composite_dev *cdev) { static const struct fsg_operations ops = { .thread_exits = msg_thread_exits, @@ -248,7 +248,7 @@ static int msg_unbind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static __refdata struct usb_composite_driver msg_driver = { +static struct usb_composite_driver msg_driver = { .name = "g_mass_storage", .dev = &msg_device_desc, .max_speed = USB_SPEED_SUPER, diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c index 39d27bb343b4..b21b51f0c9fa 100644 --- a/drivers/usb/gadget/legacy/multi.c +++ b/drivers/usb/gadget/legacy/multi.c @@ -149,7 +149,7 @@ static struct usb_function *f_acm_rndis; static struct usb_function *f_rndis; static struct usb_function *f_msg_rndis; -static __init int rndis_do_config(struct usb_configuration *c) +static int rndis_do_config(struct usb_configuration *c) { struct fsg_opts *fsg_opts; int ret; @@ -237,7 +237,7 @@ static struct usb_function *f_acm_multi; static struct usb_function *f_ecm; static struct usb_function *f_msg_multi; -static __init int cdc_do_config(struct usb_configuration *c) +static int cdc_do_config(struct usb_configuration *c) { struct fsg_opts *fsg_opts; int ret; @@ -466,7 +466,7 @@ fail: return status; } -static int __exit multi_unbind(struct usb_composite_dev *cdev) +static int multi_unbind(struct usb_composite_dev *cdev) { #ifdef CONFIG_USB_G_MULTI_CDC usb_put_function(f_msg_multi); @@ -497,13 +497,13 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static __refdata struct usb_composite_driver multi_driver = { +static struct usb_composite_driver multi_driver = { .name = "g_multi", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = multi_bind, - .unbind = __exit_p(multi_unbind), + .unbind = multi_unbind, .needs_serial = 1, }; diff --git a/drivers/usb/gadget/legacy/ncm.c b/drivers/usb/gadget/legacy/ncm.c index e90e23db2acb..6ce7421412e9 100644 --- a/drivers/usb/gadget/legacy/ncm.c +++ b/drivers/usb/gadget/legacy/ncm.c @@ -107,7 +107,7 @@ static struct usb_function *f_ncm; /*-------------------------------------------------------------------------*/ -static int __init ncm_do_config(struct usb_configuration *c) +static int ncm_do_config(struct usb_configuration *c) { int status; @@ -143,7 +143,7 @@ static struct usb_configuration ncm_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init gncm_bind(struct usb_composite_dev *cdev) +static int gncm_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct f_ncm_opts *ncm_opts; @@ -186,7 +186,7 @@ fail: return status; } -static int __exit gncm_unbind(struct usb_composite_dev *cdev) +static int gncm_unbind(struct usb_composite_dev *cdev) { if (!IS_ERR_OR_NULL(f_ncm)) usb_put_function(f_ncm); @@ -195,13 +195,13 @@ static int __exit gncm_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver ncm_driver = { +static struct usb_composite_driver ncm_driver = { .name = "g_ncm", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = gncm_bind, - .unbind = __exit_p(gncm_unbind), + .unbind = gncm_unbind, }; module_usb_composite_driver(ncm_driver); diff --git a/drivers/usb/gadget/legacy/nokia.c b/drivers/usb/gadget/legacy/nokia.c index 9b8fd701648c..4bb498a38a1c 100644 --- a/drivers/usb/gadget/legacy/nokia.c +++ b/drivers/usb/gadget/legacy/nokia.c @@ -118,7 +118,7 @@ static struct usb_function_instance *fi_obex1; static struct usb_function_instance *fi_obex2; static struct usb_function_instance *fi_phonet; -static int __init nokia_bind_config(struct usb_configuration *c) +static int nokia_bind_config(struct usb_configuration *c) { struct usb_function *f_acm; struct usb_function *f_phonet = NULL; @@ -224,7 +224,7 @@ err_get_acm: return status; } -static int __init nokia_bind(struct usb_composite_dev *cdev) +static int nokia_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; int status; @@ -307,7 +307,7 @@ err_usb: return status; } -static int __exit nokia_unbind(struct usb_composite_dev *cdev) +static int nokia_unbind(struct usb_composite_dev *cdev) { if (!IS_ERR_OR_NULL(f_obex1_cfg2)) usb_put_function(f_obex1_cfg2); @@ -338,13 +338,13 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver nokia_driver = { +static struct usb_composite_driver nokia_driver = { .name = "g_nokia", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = nokia_bind, - .unbind = __exit_p(nokia_unbind), + .unbind = nokia_unbind, }; module_usb_composite_driver(nokia_driver); diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c index d5b6ee725a2a..1ce7df1060a5 100644 --- a/drivers/usb/gadget/legacy/printer.c +++ b/drivers/usb/gadget/legacy/printer.c @@ -126,7 +126,7 @@ static struct usb_configuration printer_cfg_driver = { .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, }; -static int __init printer_do_config(struct usb_configuration *c) +static int printer_do_config(struct usb_configuration *c) { struct usb_gadget *gadget = c->cdev->gadget; int status = 0; @@ -152,7 +152,7 @@ static int __init printer_do_config(struct usb_configuration *c) return status; } -static int __init printer_bind(struct usb_composite_dev *cdev) +static int printer_bind(struct usb_composite_dev *cdev) { struct f_printer_opts *opts; int ret, len; @@ -191,7 +191,7 @@ static int __init printer_bind(struct usb_composite_dev *cdev) return ret; } -static int __exit printer_unbind(struct usb_composite_dev *cdev) +static int printer_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_printer); usb_put_function_instance(fi_printer); @@ -199,7 +199,7 @@ static int __exit printer_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver printer_driver = { +static struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, .strings = dev_strings, diff --git a/drivers/usb/gadget/legacy/serial.c b/drivers/usb/gadget/legacy/serial.c index 1f5f978d35d5..8b7528f9b78e 100644 --- a/drivers/usb/gadget/legacy/serial.c +++ b/drivers/usb/gadget/legacy/serial.c @@ -174,7 +174,7 @@ out: return ret; } -static int __init gs_bind(struct usb_composite_dev *cdev) +static int gs_bind(struct usb_composite_dev *cdev) { int status; @@ -230,7 +230,7 @@ static int gs_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver gserial_driver = { +static struct usb_composite_driver gserial_driver = { .name = "g_serial", .dev = &device_desc, .strings = dev_strings, diff --git a/drivers/usb/gadget/legacy/tcm_usb_gadget.c b/drivers/usb/gadget/legacy/tcm_usb_gadget.c index 8b80addc4ce6..f9b4882fce52 100644 --- a/drivers/usb/gadget/legacy/tcm_usb_gadget.c +++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.c @@ -2397,7 +2397,7 @@ static int usb_target_bind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver usbg_driver = { +static struct usb_composite_driver usbg_driver = { .name = "g_target", .dev = &usbg_device_desc, .strings = usbg_strings, diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c index 04a3da20f742..72c976bf3530 100644 --- a/drivers/usb/gadget/legacy/webcam.c +++ b/drivers/usb/gadget/legacy/webcam.c @@ -334,7 +334,7 @@ static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = { * USB configuration */ -static int __init +static int webcam_config_bind(struct usb_configuration *c) { int status = 0; @@ -358,7 +358,7 @@ static struct usb_configuration webcam_config_driver = { .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW, }; -static int /* __init_or_exit */ +static int webcam_unbind(struct usb_composite_dev *cdev) { if (!IS_ERR_OR_NULL(f_uvc)) @@ -368,7 +368,7 @@ webcam_unbind(struct usb_composite_dev *cdev) return 0; } -static int __init +static int webcam_bind(struct usb_composite_dev *cdev) { struct f_uvc_opts *uvc_opts; @@ -422,7 +422,7 @@ error: * Driver */ -static __refdata struct usb_composite_driver webcam_driver = { +static struct usb_composite_driver webcam_driver = { .name = "g_webcam", .dev = &webcam_device_descriptor, .strings = webcam_device_strings, diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c index 5ee95152493c..c986e8addb90 100644 --- a/drivers/usb/gadget/legacy/zero.c +++ b/drivers/usb/gadget/legacy/zero.c @@ -272,7 +272,7 @@ static struct usb_function_instance *func_inst_lb; module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(qlen, "depth of loopback queue"); -static int __init zero_bind(struct usb_composite_dev *cdev) +static int zero_bind(struct usb_composite_dev *cdev) { struct f_ss_opts *ss_opts; struct f_lb_opts *lb_opts; @@ -400,7 +400,7 @@ static int zero_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver zero_driver = { +static struct usb_composite_driver zero_driver = { .name = "zero", .dev = &device_desc, .strings = dev_strings, diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index 2fbedca3c2b4..fc4226462f8f 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -1942,7 +1942,7 @@ err_unprepare_fclk: return retval; } -static int __exit at91udc_remove(struct platform_device *pdev) +static int at91udc_remove(struct platform_device *pdev) { struct at91_udc *udc = platform_get_drvdata(pdev); unsigned long flags; @@ -2018,7 +2018,7 @@ static int at91udc_resume(struct platform_device *pdev) #endif static struct platform_driver at91_udc_driver = { - .remove = __exit_p(at91udc_remove), + .remove = at91udc_remove, .shutdown = at91udc_shutdown, .suspend = at91udc_suspend, .resume = at91udc_resume, diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 4c01953a0869..351d48550c33 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -2186,7 +2186,7 @@ static int usba_udc_probe(struct platform_device *pdev) return 0; } -static int __exit usba_udc_remove(struct platform_device *pdev) +static int usba_udc_remove(struct platform_device *pdev) { struct usba_udc *udc; int i; @@ -2258,7 +2258,7 @@ static int usba_udc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume); static struct platform_driver udc_driver = { - .remove = __exit_p(usba_udc_remove), + .remove = usba_udc_remove, .driver = { .name = "atmel_usba_udc", .pm = &usba_udc_pm_ops, diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index 55fcb930f92e..c60022b46a48 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -2525,7 +2525,7 @@ err_kfree: /* Driver removal function * Free resources and finish pending transactions */ -static int __exit fsl_udc_remove(struct platform_device *pdev) +static int fsl_udc_remove(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -2663,7 +2663,7 @@ static const struct platform_device_id fsl_udc_devtype[] = { }; MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { - .remove = __exit_p(fsl_udc_remove), + .remove = fsl_udc_remove, /* Just for FSL i.mx SoC currently */ .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c index fb4df159d32d..3970f453de49 100644 --- a/drivers/usb/gadget/udc/fusb300_udc.c +++ b/drivers/usb/gadget/udc/fusb300_udc.c @@ -1342,7 +1342,7 @@ static const struct usb_gadget_ops fusb300_gadget_ops = { .udc_stop = fusb300_udc_stop, }; -static int __exit fusb300_remove(struct platform_device *pdev) +static int fusb300_remove(struct platform_device *pdev) { struct fusb300 *fusb300 = platform_get_drvdata(pdev); @@ -1492,7 +1492,7 @@ clean_up: } static struct platform_driver fusb300_driver = { - .remove = __exit_p(fusb300_remove), + .remove = fusb300_remove, .driver = { .name = (char *) udc_name, }, diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c index 8c7c83c93713..309706fe4bf0 100644 --- a/drivers/usb/gadget/udc/m66592-udc.c +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -1528,7 +1528,7 @@ static const struct usb_gadget_ops m66592_gadget_ops = { .pullup = m66592_pullup, }; -static int __exit m66592_remove(struct platform_device *pdev) +static int m66592_remove(struct platform_device *pdev) { struct m66592 *m66592 = platform_get_drvdata(pdev); @@ -1695,7 +1695,7 @@ clean_up: /*-------------------------------------------------------------------------*/ static struct platform_driver m66592_driver = { - .remove = __exit_p(m66592_remove), + .remove = m66592_remove, .driver = { .name = (char *) udc_name, }, diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index 2495fe9c95c5..0293f7169dee 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1820,7 +1820,7 @@ static const struct usb_gadget_ops r8a66597_gadget_ops = { .set_selfpowered = r8a66597_set_selfpowered, }; -static int __exit r8a66597_remove(struct platform_device *pdev) +static int r8a66597_remove(struct platform_device *pdev) { struct r8a66597 *r8a66597 = platform_get_drvdata(pdev); @@ -1974,7 +1974,7 @@ clean_up2: /*-------------------------------------------------------------------------*/ static struct platform_driver r8a66597_driver = { - .remove = __exit_p(r8a66597_remove), + .remove = r8a66597_remove, .driver = { .name = (char *) udc_name, }, From 68ce9a1f24b8e8894955032a4af74998315be9fe Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 28 Apr 2015 09:05:21 +0800 Subject: [PATCH 095/652] ARM: dts: imx6qdl-sabreauto: remove pinctrl-assert-gpios The pinctrl-assert-gpios is an invalid pinctrl property. It was probably sneaked from vendor tree. Remove it. Fixes: 4e18a2243a87 ("ARM: imx6qdl-sabreauto.dtsi: add max7310 support") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 46b2fed7c319..3b24b12651b2 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -185,7 +185,6 @@ &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; status = "okay"; max7310_a: gpio@30 { From 414b7e3b9ce8b0577f613e656fdbc36b34b444dd Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 24 Apr 2015 11:03:37 -0500 Subject: [PATCH 096/652] rtlwifi: rtl8192cu: Fix kernel deadlock The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by: Bernhard Wiedemann Tested-by: Bernhard Wiedemann Signed-off-by: Larry Finger Cc: Stable Cc: Bernhard Wiedemann Cc: Takashi Iwai Signed-off-by: Kalle Valo --- drivers/net/wireless/rtlwifi/usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index f0188c83c79f..2721cf89fb16 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -126,7 +126,7 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request, do { status = usb_control_msg(udev, pipe, request, reqtype, value, - index, pdata, len, 0); /*max. timeout*/ + index, pdata, len, 1000); if (status < 0) { /* firmware download is checksumed, don't retry */ if ((value >= FW_8192C_START_ADDRESS && From fefad2d54beb8aad6bf4ac6daeb74f86f52565de Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 12 Apr 2015 09:09:05 -0300 Subject: [PATCH 097/652] [media] v4l: omap4iss: Replace outdated OMAP4 control pad API with syscon The omap4_ctrl_pad_readl and omap4_ctrl_pad_writel functions have been removed by commit efde234674d9 but are still used by the OMAP4 ISS driver, resulting in a compilation breakage: drivers/staging/media/omap4iss/iss_csiphy.c: In function 'omap4iss_csiphy_config': drivers/staging/media/omap4iss/iss_csiphy.c:167:2: error: implicit declaration of function 'omap4_ctrl_pad_writel' [-Werror=implicit-function-declaration] omap4_ctrl_pad_writel(cam_rx_ctrl, Fix the problem by using the syscon API to reaplace the control pad API. Lookup the syscon instance by compatible name for now as the OMAP4 ISS driver doesn't support DT yet. Fixes: efde234674d9 ("ARM: OMAP4+: control: remove support for legacy pad read/write") Signed-off-by: Laurent Pinchart Acked-by: Sakari Alius Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/omap4iss/Kconfig | 1 + drivers/staging/media/omap4iss/iss.c | 11 +++++++++++ drivers/staging/media/omap4iss/iss.h | 4 ++++ drivers/staging/media/omap4iss/iss_csiphy.c | 12 +++++++----- 4 files changed, 23 insertions(+), 5 deletions(-) diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig index b78643f907e7..072dac04a750 100644 --- a/drivers/staging/media/omap4iss/Kconfig +++ b/drivers/staging/media/omap4iss/Kconfig @@ -2,6 +2,7 @@ config VIDEO_OMAP4 bool "OMAP 4 Camera support" depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 depends on HAS_DMA + select MFD_SYSCON select VIDEOBUF2_DMA_CONTIG ---help--- Driver for an OMAP 4 ISS controller. diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c index e0ad5e520e2d..7ced940bd807 100644 --- a/drivers/staging/media/omap4iss/iss.c +++ b/drivers/staging/media/omap4iss/iss.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -1386,6 +1387,16 @@ static int iss_probe(struct platform_device *pdev) platform_set_drvdata(pdev, iss); + /* + * TODO: When implementing DT support switch to syscon regmap lookup by + * phandle. + */ + iss->syscon = syscon_regmap_lookup_by_compatible("syscon"); + if (IS_ERR(iss->syscon)) { + ret = PTR_ERR(iss->syscon); + goto error; + } + /* Clocks */ ret = iss_map_mem_resource(pdev, iss, OMAP4_ISS_MEM_TOP); if (ret < 0) diff --git a/drivers/staging/media/omap4iss/iss.h b/drivers/staging/media/omap4iss/iss.h index 734cfeeb0314..35df8b4709e6 100644 --- a/drivers/staging/media/omap4iss/iss.h +++ b/drivers/staging/media/omap4iss/iss.h @@ -29,6 +29,8 @@ #include "iss_ipipe.h" #include "iss_resizer.h" +struct regmap; + #define to_iss_device(ptr_module) \ container_of(ptr_module, struct iss_device, ptr_module) #define to_device(ptr_module) \ @@ -79,6 +81,7 @@ struct iss_reg { /* * struct iss_device - ISS device structure. + * @syscon: Regmap for the syscon register space * @crashed: Bitmask of crashed entities (indexed by entity ID) */ struct iss_device { @@ -93,6 +96,7 @@ struct iss_device { struct resource *res[OMAP4_ISS_MEM_LAST]; void __iomem *regs[OMAP4_ISS_MEM_LAST]; + struct regmap *syscon; u64 raw_dmamask; diff --git a/drivers/staging/media/omap4iss/iss_csiphy.c b/drivers/staging/media/omap4iss/iss_csiphy.c index 7c3d55d811ef..748607f8918f 100644 --- a/drivers/staging/media/omap4iss/iss_csiphy.c +++ b/drivers/staging/media/omap4iss/iss_csiphy.c @@ -13,6 +13,7 @@ #include #include +#include #include "../../../../arch/arm/mach-omap2/control.h" @@ -140,9 +141,11 @@ int omap4iss_csiphy_config(struct iss_device *iss, * - bit [18] : CSIPHY1 CTRLCLK enable * - bit [17:16] : CSIPHY1 config: 00 d-phy, 01/10 ccp2 */ - cam_rx_ctrl = omap4_ctrl_pad_readl( - OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX); - + /* + * TODO: When implementing DT support specify the CONTROL_CAMERA_RX + * register offset in the syscon property instead of hardcoding it. + */ + regmap_read(iss->syscon, 0x68, &cam_rx_ctrl); if (subdevs->interface == ISS_INTERFACE_CSI2A_PHY1) { cam_rx_ctrl &= ~(OMAP4_CAMERARX_CSI21_LANEENABLE_MASK | @@ -166,8 +169,7 @@ int omap4iss_csiphy_config(struct iss_device *iss, cam_rx_ctrl |= OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK; } - omap4_ctrl_pad_writel(cam_rx_ctrl, - OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX); + regmap_write(iss->syscon, 0x68, cam_rx_ctrl); /* Reset used lane count */ csi2->phy->used_data_lanes = 0; From 8d193ca26cc28019e760b77830295a0c349d90dc Mon Sep 17 00:00:00 2001 From: Eran Harary Date: Mon, 27 Apr 2015 10:29:31 +0300 Subject: [PATCH 098/652] iwlwifi: mvm: don't power off the device between INIT and OPER firmwares Our device needs two different firmwares: the INIT firmware and the operational (OPER) firmware. The first one is run when the driver loads and it returns calibrations results as well as the NVM. The second one implements the WiFi protocol. If the wlan interface is not brought up, the device is put to low power state: no firmware will be running. When the interface is brought up, we would run the OPER firmware only and reuse the results of the run of the INIT firmware when the driver was loaded. This is changing with this patch. We now run the INIT firmware every time mac80211 calls start(). The penalty for that is minimal since the INIT firwmare run fast. I now also avoid to power down the device between the INIT and OPER firmware on certains buses. The motivation for this change is that there are components on the device (MFUART) that are triggered by the INIT firmware and need the device to be powered up in order to keep running. Powering the device down between the INIT and OPER firmware would stop these components and prevent them from running again since they are triggered by the INIT firmware only. The new flow allows this and also allows to trigger these components again when the interface is brought up after it has been brought down. Signed-off-by: Eran Harary Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-trans.h | 41 ++++++++++++++------- drivers/net/wireless/iwlwifi/mvm/fw.c | 45 +++++++++++------------ drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 - drivers/net/wireless/iwlwifi/pcie/trans.c | 6 +-- 4 files changed, 51 insertions(+), 42 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 6dfed1259260..56254a837214 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -421,8 +421,9 @@ struct iwl_trans_txq_scd_cfg { * * All the handlers MUST be implemented * - * @start_hw: starts the HW- from that point on, the HW can send interrupts - * May sleep + * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken + * out of a low power state. From that point on, the HW can send + * interrupts. May sleep. * @op_mode_leave: Turn off the HW RF kill indication if on * May sleep * @start_fw: allocates and inits all the resources for the transport @@ -432,10 +433,11 @@ struct iwl_trans_txq_scd_cfg { * the SCD base address in SRAM, then provide it here, or 0 otherwise. * May sleep * @stop_device: stops the whole device (embedded CPU put to reset) and stops - * the HW. From that point on, the HW will be in low power but will still - * issue interrupt if the HW RF kill is triggered. This callback must do - * the right thing and not crash even if start_hw() was called but not - * start_fw(). May sleep + * the HW. If low_power is true, the NIC will be put in low power state. + * From that point on, the HW will be stopped but will still issue an + * interrupt if the HW RF kill switch is triggered. + * This callback must do the right thing and not crash even if %start_hw() + * was called but not &start_fw(). May sleep. * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. @@ -491,14 +493,14 @@ struct iwl_trans_txq_scd_cfg { */ struct iwl_trans_ops { - int (*start_hw)(struct iwl_trans *iwl_trans); + int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power); void (*op_mode_leave)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill); int (*update_sf)(struct iwl_trans *trans, struct iwl_sf_region *st_fwrd_space); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); - void (*stop_device)(struct iwl_trans *trans); + void (*stop_device)(struct iwl_trans *trans, bool low_power); void (*d3_suspend)(struct iwl_trans *trans, bool test); int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, @@ -652,11 +654,16 @@ static inline void iwl_trans_configure(struct iwl_trans *trans, trans->ops->configure(trans, trans_cfg); } -static inline int iwl_trans_start_hw(struct iwl_trans *trans) +static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power) { might_sleep(); - return trans->ops->start_hw(trans); + return trans->ops->start_hw(trans, low_power); +} + +static inline int iwl_trans_start_hw(struct iwl_trans *trans) +{ + return trans->ops->start_hw(trans, true); } static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) @@ -703,15 +710,21 @@ static inline int iwl_trans_update_sf(struct iwl_trans *trans, return 0; } -static inline void iwl_trans_stop_device(struct iwl_trans *trans) +static inline void _iwl_trans_stop_device(struct iwl_trans *trans, + bool low_power) { might_sleep(); - trans->ops->stop_device(trans); + trans->ops->stop_device(trans, low_power); trans->state = IWL_TRANS_NO_FW; } +static inline void iwl_trans_stop_device(struct iwl_trans *trans) +{ + _iwl_trans_stop_device(trans, true); +} + static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test) { might_sleep(); diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 9c28fe72fd74..df869633f4dd 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -322,7 +322,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) lockdep_assert_held(&mvm->mutex); - if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating)) + if (WARN_ON_ONCE(mvm->calibrating)) return 0; iwl_init_notification_wait(&mvm->notif_wait, @@ -396,8 +396,6 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) */ ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, MVM_UCODE_CALIB_TIMEOUT); - if (!ret) - mvm->init_ucode_complete = true; if (ret && iwl_mvm_is_radio_killed(mvm)) { IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); @@ -649,25 +647,24 @@ int iwl_mvm_up(struct iwl_mvm *mvm) * module loading, load init ucode now * (for example, if we were in RFKILL) */ - if (!mvm->init_ucode_complete) { - ret = iwl_run_init_mvm_ucode(mvm, false); - if (ret && !iwlmvm_mod_params.init_dbg) { - IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); - /* this can't happen */ - if (WARN_ON(ret > 0)) - ret = -ERFKILL; - goto error; - } - if (!iwlmvm_mod_params.init_dbg) { - /* - * should stop and start HW since that INIT - * image just loaded - */ - iwl_trans_stop_device(mvm->trans); - ret = iwl_trans_start_hw(mvm->trans); - if (ret) - return ret; - } + ret = iwl_run_init_mvm_ucode(mvm, false); + if (ret && !iwlmvm_mod_params.init_dbg) { + IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); + /* this can't happen */ + if (WARN_ON(ret > 0)) + ret = -ERFKILL; + goto error; + } + if (!iwlmvm_mod_params.init_dbg) { + /* + * Stop and start the transport without entering low power + * mode. This will save the state of other components on the + * device that are triggered by the INIT firwmare (MFUART). + */ + _iwl_trans_stop_device(mvm->trans, false); + _iwl_trans_start_hw(mvm->trans, false); + if (ret) + return ret; } if (iwlmvm_mod_params.init_dbg) diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d5522a161242..cf70f681d1ac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -603,7 +603,6 @@ struct iwl_mvm { enum iwl_ucode_type cur_ucode; bool ucode_loaded; - bool init_ucode_complete; bool calibrating; u32 error_event_table; u32 log_event_table; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 6debb0c9111a..47bbf573fdc8 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1021,7 +1021,7 @@ static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) iwl_pcie_tx_start(trans, scd_addr); } -static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) +static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); bool hw_rfkill, was_hw_rfkill; @@ -1116,7 +1116,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) void iwl_trans_pcie_rf_kill(struct iwl_trans *trans, bool state) { if (iwl_op_mode_hw_rf_kill(trans->op_mode, state)) - iwl_trans_pcie_stop_device(trans); + iwl_trans_pcie_stop_device(trans, true); } static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test) @@ -1201,7 +1201,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, return 0; } -static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) +static int iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power) { bool hw_rfkill; int err; From 6bbd5521edd3896190f5c0581f059b7c93daf670 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 28 Apr 2015 15:00:23 +0300 Subject: [PATCH 099/652] iwlwifi: mvm: fix typo in CONFIG option I forgot to rename the CPTCFG_ prefix... Fixes: 484b3d13b4ac ("iwlwifi: mvm: add debugfs entry with the number of net-detect scans") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/d3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index a6c48c7b1e16..1b1b2bf26819 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1726,7 +1726,7 @@ iwl_mvm_netdetect_query_results(struct iwl_mvm *mvm, results->matched_profiles = le32_to_cpu(query->matched_profiles); memcpy(results->matches, query->matches, sizeof(results->matches)); -#ifdef CPTCFG_IWLWIFI_DEBUGFS +#ifdef CONFIG_IWLWIFI_DEBUGFS mvm->last_netdetect_scans = le32_to_cpu(query->n_scans_done); #endif From e7afe89fd67d40a7f5fff8130c5f925d99a94b1f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2015 09:21:46 +0200 Subject: [PATCH 100/652] iwlwifi: mvm: force quota update update after FW restart During firmware restart, the quota command isn't calculated multiple times, but after the firmware restart it has to be sent, so force it. Otherwise the firmware crashes. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7c2d5ace0eb3..40265b9c66ae 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1322,7 +1322,7 @@ static void iwl_mvm_restart_complete(struct iwl_mvm *mvm) clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); iwl_mvm_d0i3_enable_tx(mvm, NULL); - ret = iwl_mvm_update_quotas(mvm, false, NULL); + ret = iwl_mvm_update_quotas(mvm, true, NULL); if (ret) IWL_ERR(mvm, "Failed to update quotas after restart (%d)\n", ret); From 982df6aec06479c844f46f7a5cc960151f8fc005 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 18:18:35 +0300 Subject: [PATCH 101/652] pinctrl: qcom-spmi-gpio: Fix output type configuration GPIO output type configuration was incorrectly overwritten by strength value. Fix this. Signed-off-by: Ivan T. Ivanov Acked-by: Bjorn Andersson Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index b2d22218a258..4b21aac43216 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -417,7 +417,7 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin, return ret; val = pad->buffer_type << PMIC_GPIO_REG_OUT_TYPE_SHIFT; - val = pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT; + val |= pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT; ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_DIG_OUT_CTL, val); if (ret < 0) From 24a66618d63548e1012bf65ed30a3c031f410ca2 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 18:18:36 +0300 Subject: [PATCH 102/652] pinctrl: qcom-spmi-gpio: Fix input value report Read input buffer when input is enabled, not when it is disabled. Also fix interpretation of the pmic_gpio_read() return code, negative value means an error. Signed-off-by: Ivan T. Ivanov Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 4b21aac43216..e8b74c69222e 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -466,12 +466,13 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev, seq_puts(s, " ---"); } else { - if (!pad->input_enabled) { + if (pad->input_enabled) { ret = pmic_gpio_read(state, pad, PMIC_MPP_REG_RT_STS); - if (!ret) { - ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; - pad->out_value = ret; - } + if (ret < 0) + return; + + ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; + pad->out_value = ret; } seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in"); From 4e637ac212b63f4b5dd1da626aca34ffcbfd5daa Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 18:18:37 +0300 Subject: [PATCH 103/652] pinctrl: qcom-spmi-mpp: Fix input value report Fix interpretation of the pmic_mpp_read() return code, negative value means an error. Signed-off-by: Ivan T. Ivanov Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 890df16353b3..211b942ad6d5 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -577,10 +577,11 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev, if (pad->input_enabled) { ret = pmic_mpp_read(state, pad, PMIC_MPP_REG_RT_STS); - if (!ret) { - ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; - pad->out_value = ret; - } + if (ret < 0) + return; + + ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; + pad->out_value = ret; } seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in"); From a4b6916cb3578b05f30ef520cd6deb7f8fd97dda Mon Sep 17 00:00:00 2001 From: Tomeu Vizoso Date: Fri, 3 Apr 2015 09:21:11 +0200 Subject: [PATCH 104/652] ARM: tegra: Correct which USB controller has the UTMI pad registers It should be the first controller, not the second. The indexes of the usb resets were also wrong and have been fixed. The issue was caused by the changes in 308efde ("ARM: tegra: Add resets & has-utmi-pad-registers flag to all USB PHYs") being misapplied by git due to the patch context being insufficient. This broke USB after 6261b06 ("regulator: Defer lookup of supply to regulator_get"), because it changed the order in which the controllers were probed. The fix for this issue was suggested by Mikko Perttunen and Tuomas Tynkkynen. Signed-off-by: Tomeu Vizoso Cc: Mikko Perttunen Cc: Tuomas Tynkkynen Tested-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index cf01c818b8ea..13cc7ca5e031 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -826,7 +826,7 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; - resets = <&tegra_car 59>, <&tegra_car 22>; + resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; @@ -838,6 +838,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -862,7 +863,7 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; - resets = <&tegra_car 22>, <&tegra_car 22>; + resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; @@ -874,7 +875,6 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; - nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -899,7 +899,7 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; - resets = <&tegra_car 58>, <&tegra_car 22>; + resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; From c735ed74d83f8ecb45c4c4c95a16853c9c3c8157 Mon Sep 17 00:00:00 2001 From: Mark Edwards Date: Tue, 14 Apr 2015 08:52:34 -0400 Subject: [PATCH 105/652] USB: cp210x: add ID for KCF Technologies PRN device Added the USB serial console device ID for KCF Technologies PRN device which has a USB port for its serial console. Signed-off-by: Mark Edwards Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 84ce2d74894c..9031750e7404 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -127,6 +127,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ + { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ From 48ef23a4f686b1e4519d4193c20d26834ff810ff Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 22 Apr 2015 14:35:08 +0200 Subject: [PATCH 106/652] USB: pl2303: Remove support for Samsung I330 This phone is already supported by the visor driver. Signed-off-by: Jason A. Donenfeld Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/pl2303.c | 1 - drivers/usb/serial/pl2303.h | 4 ---- 2 files changed, 5 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 829604d11f3f..f5257af33ecf 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -61,7 +61,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) }, { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, - { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1), .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65), diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 71fd9da1d6e7..e3b7af8adfb7 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -62,10 +62,6 @@ #define ALCATEL_VENDOR_ID 0x11f7 #define ALCATEL_PRODUCT_ID 0x02df -/* Samsung I330 phone cradle */ -#define SAMSUNG_VENDOR_ID 0x04e8 -#define SAMSUNG_PRODUCT_ID 0x8001 - #define SIEMENS_VENDOR_ID 0x11f5 #define SIEMENS_PRODUCT_ID_SX1 0x0001 #define SIEMENS_PRODUCT_ID_X65 0x0003 From 82ee3aeb9295c5fc37fd2ddf20f13ac2b40ec97d Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 22 Apr 2015 14:35:09 +0200 Subject: [PATCH 107/652] USB: visor: Match I330 phone more precisely Samsung has just released a portable USB3 SSD, coming in a very small and nice form factor. It's USB ID is 04e8:8001, which unfortunately is already used by the Palm Visor driver for the Samsung I330 phone cradle. Having pl2303 or visor pick up this device ID results in conflicts with the usb-storage driver, which handles the newly released portable USB3 SSD. To work around this conflict, I've dug up a mailing list post [1] from a long time ago, in which a user posts the full USB descriptor information. The most specific value in this appears to be the interface class, which has value 255 (0xff). Since usb-storage requires an interface class of 0x8, I believe it's correct to disambiguate the two devices by matching on 0xff inside visor. [1] http://permalink.gmane.org/gmane.linux.usb.user/4264 Signed-off-by: Jason A. Donenfeld Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/visor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index bf2bd40e5f2a..60afb39eb73c 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -95,7 +95,7 @@ static const struct usb_device_id id_table[] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, - { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), + { USB_DEVICE_INTERFACE_CLASS(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID, 0xff), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, From ca082355b542710fd07559ee05f6975c2768344b Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 27 Apr 2015 20:36:28 +0900 Subject: [PATCH 108/652] clk: Use CONFIG_ARCH_EXYNOS instead of CONFIG_ARCH_EXYNOS5433 This patch removes the CONFIG_ARCH_EXYNOS5433 and then use only the CONFIG_ARCH_EXYNOS for ARM-64bit Exynos5433 SoC. Signed-off-by: Chanwoo Choi Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 17e9af7fe81f..a17683b2cf27 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o obj-$(CONFIG_SOC_EXYNOS5410) += clk-exynos5410.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o -obj-$(CONFIG_ARCH_EXYNOS5433) += clk-exynos5433.o +obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos5433.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-clkout.o From a84d1f546c0ef11446d8db6fd1a2c8d24d107b0b Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Mon, 27 Apr 2015 20:36:29 +0900 Subject: [PATCH 109/652] clk: exynos5433: Fix wrong offset of PCLK_MSCL_SECURE_SMMU_JPEG This patch fixes the wrong offoset of PCLK_MSCL_SECURE_SMMU_JPEG in CMU_MSCL domain. Fixes: b274bbfd8b4a94 (clk: samsung: exynos5433: Add clocks for CMU_MSCL domain) Signed-off-by: Jonghwa Lee Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index 387e3e39e635..543f9c7707a7 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -3927,7 +3927,7 @@ CLK_OF_DECLARE(exynos5433_cmu_atlas, "samsung,exynos5433-cmu-atlas", #define ENABLE_PCLK_MSCL 0x0900 #define ENABLE_PCLK_MSCL_SECURE_SMMU_M2MSCALER0 0x0904 #define ENABLE_PCLK_MSCL_SECURE_SMMU_M2MSCALER1 0x0908 -#define ENABLE_PCLK_MSCL_SECURE_SMMU_JPEG 0x000c +#define ENABLE_PCLK_MSCL_SECURE_SMMU_JPEG 0x090c #define ENABLE_SCLK_MSCL 0x0a00 #define ENABLE_IP_MSCL0 0x0b00 #define ENABLE_IP_MSCL1 0x0b04 From 1a9f6c887db891ed477642c38a1e17ee23c3f02b Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Mon, 27 Apr 2015 20:36:30 +0900 Subject: [PATCH 110/652] clk: exynos5433: Fix CLK_PCLK_MONOTONIC_CNT clk register assignment CLK_PCLK_MONOTONIC_CNT clock had a wrong register assigned to it. The correct register is ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT. Signed-off-by: Jonghwa Lee Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index 543f9c7707a7..b1a546e402aa 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -1490,7 +1490,7 @@ static struct samsung_gate_clock mif_gate_clks[] __initdata = { /* ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT */ GATE(CLK_PCLK_MONOTONIC_CNT, "pclk_monotonic_cnt", "div_aclk_mif_133", - ENABLE_PCLK_MIF_SECURE_RTC, 0, 0, 0), + ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT, 0, 0, 0), /* ENABLE_PCLK_MIF_SECURE_RTC */ GATE(CLK_PCLK_RTC, "pclk_rtc", "div_aclk_mif_133", From b57c93be79e4061b8878315df2f6a239ad967d50 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 27 Apr 2015 20:36:31 +0900 Subject: [PATCH 111/652] clk: exynos5433: Fix wrong parent clock of sclk_apollo clock This patch fixes the wrong parent clock of sclk_apollo clock from 'div_apollo_pll' to 'div_apollo2'. Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index b1a546e402aa..ec294260ef09 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -3665,7 +3665,7 @@ static struct samsung_gate_clock apollo_gate_clks[] __initdata = { ENABLE_SCLK_APOLLO, 3, CLK_IGNORE_UNUSED, 0), GATE(CLK_SCLK_HPM_APOLLO, "sclk_hpm_apollo", "div_sclk_hpm_apollo", ENABLE_SCLK_APOLLO, 1, CLK_IGNORE_UNUSED, 0), - GATE(CLK_SCLK_APOLLO, "sclk_apollo", "div_apollo_pll", + GATE(CLK_SCLK_APOLLO, "sclk_apollo", "div_apollo2", ENABLE_SCLK_APOLLO, 0, CLK_IGNORE_UNUSED, 0), }; From 85943d7ea5832afd454b7219ec1d8c2498c4fbcc Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 27 Apr 2015 20:36:32 +0900 Subject: [PATCH 112/652] clk: exynos5433: Fix wrong PMS value of exynos5433_pll_rates This patch fixes the wrong PMS value of exynos5433_pll_rates table for {ATLAS|APOLLO|MEM0|MEM1|BUS|MFC|MPHY|G3D|DISP|ISP|_PLL. - 720 MHz (mdiv=360, pdiv=6, sdiv=1) -> 700 MHz (mdiv=175, pdiv=3, sdiv=1) - 350 MHz (mdiv=360, pdiv=6, sdiv=2) -> (mdiv=350, pdiv=6, sdiv=2) - 133 MHz (mdiv=552, pdiv=6, sdiv=4) -> (mdiv=532, pdiv=6, sdiv=4) Signed-off-by: Chanwoo Choi Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index ec294260ef09..9e04ae2bb4d7 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -748,7 +748,7 @@ static struct samsung_pll_rate_table exynos5443_pll_rates[] = { PLL_35XX_RATE(825000000U, 275, 4, 1), PLL_35XX_RATE(800000000U, 400, 6, 1), PLL_35XX_RATE(733000000U, 733, 12, 1), - PLL_35XX_RATE(700000000U, 360, 6, 1), + PLL_35XX_RATE(700000000U, 175, 3, 1), PLL_35XX_RATE(667000000U, 222, 4, 1), PLL_35XX_RATE(633000000U, 211, 4, 1), PLL_35XX_RATE(600000000U, 500, 5, 2), @@ -760,14 +760,14 @@ static struct samsung_pll_rate_table exynos5443_pll_rates[] = { PLL_35XX_RATE(444000000U, 370, 5, 2), PLL_35XX_RATE(420000000U, 350, 5, 2), PLL_35XX_RATE(400000000U, 400, 6, 2), - PLL_35XX_RATE(350000000U, 360, 6, 2), + PLL_35XX_RATE(350000000U, 350, 6, 2), PLL_35XX_RATE(333000000U, 222, 4, 2), PLL_35XX_RATE(300000000U, 500, 5, 3), PLL_35XX_RATE(266000000U, 532, 6, 3), PLL_35XX_RATE(200000000U, 400, 6, 3), PLL_35XX_RATE(166000000U, 332, 6, 3), PLL_35XX_RATE(160000000U, 320, 6, 3), - PLL_35XX_RATE(133000000U, 552, 6, 4), + PLL_35XX_RATE(133000000U, 532, 6, 4), PLL_35XX_RATE(100000000U, 400, 6, 4), { /* sentinel */ } }; From 2b953a5e994ce279904ec70220f7d4f31d380a0a Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Tue, 28 Apr 2015 18:46:20 -0400 Subject: [PATCH 113/652] xen: Suspend ticks on all CPUs during suspend Commit 77e32c89a711 ("clockevents: Manage device's state separately for the core") decouples clockevent device's modes from states. With this change when a Xen guest tries to resume, it won't be calling its set_mode op which needs to be done on each VCPU in order to make the hypervisor aware that we are in oneshot mode. This happens because clockevents_tick_resume() (which is an intermediate step of resuming ticks on a processor) doesn't call clockevents_set_state() anymore and because during suspend clockevent devices on all VCPUs (except for the one doing the suspend) are left in ONESHOT state. As result, during resume the clockevents state machine will assume that device is already where it should be and doesn't need to be updated. To avoid this problem we should suspend ticks on all VCPUs during suspend. Signed-off-by: Boris Ostrovsky Signed-off-by: David Vrabel --- arch/x86/xen/suspend.c | 10 ++++++++++ drivers/xen/manage.c | 9 ++++++--- include/xen/xen-ops.h | 1 + 3 files changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index d9497698645a..53b4c0811f4f 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -88,7 +88,17 @@ static void xen_vcpu_notify_restore(void *data) tick_resume_local(); } +static void xen_vcpu_notify_suspend(void *data) +{ + tick_suspend_local(); +} + void xen_arch_resume(void) { on_each_cpu(xen_vcpu_notify_restore, NULL, 1); } + +void xen_arch_suspend(void) +{ + on_each_cpu(xen_vcpu_notify_suspend, NULL, 1); +} diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index bf1940706422..9e6a85104a20 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -131,6 +131,8 @@ static void do_suspend(void) goto out_resume; } + xen_arch_suspend(); + si.cancelled = 1; err = stop_machine(xen_suspend, &si, cpumask_of(0)); @@ -148,11 +150,12 @@ static void do_suspend(void) si.cancelled = 1; } + xen_arch_resume(); + out_resume: - if (!si.cancelled) { - xen_arch_resume(); + if (!si.cancelled) xs_resume(); - } else + else xs_suspend_cancel(); dpm_resume_end(si.cancelled ? PMSG_THAW : PMSG_RESTORE); diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index c643e6a94c9a..0ce4f32017ea 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -13,6 +13,7 @@ void xen_arch_post_suspend(int suspend_cancelled); void xen_timer_resume(void); void xen_arch_resume(void); +void xen_arch_suspend(void); void xen_resume_notifier_register(struct notifier_block *nb); void xen_resume_notifier_unregister(struct notifier_block *nb); From 8014bcc86ef112eab9ee1db312dba4e6b608cf89 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Apr 2015 00:26:35 +0100 Subject: [PATCH 114/652] xen-pciback: Add name prefix to global 'permissive' variable The variable for the 'permissive' module parameter used to be static but was recently changed to be extern. This puts it in the kernel global namespace if the driver is built-in, so its name should begin with a prefix identifying the driver. Signed-off-by: Ben Hutchings Fixes: af6fc858a35b ("xen-pciback: limit guest control of command register") Signed-off-by: David Vrabel --- drivers/xen/xen-pciback/conf_space.c | 6 +++--- drivers/xen/xen-pciback/conf_space.h | 2 +- drivers/xen/xen-pciback/conf_space_header.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c index 75fe3d466515..9c234209d8b5 100644 --- a/drivers/xen/xen-pciback/conf_space.c +++ b/drivers/xen/xen-pciback/conf_space.c @@ -16,8 +16,8 @@ #include "conf_space.h" #include "conf_space_quirks.h" -bool permissive; -module_param(permissive, bool, 0644); +bool xen_pcibk_permissive; +module_param_named(permissive, xen_pcibk_permissive, bool, 0644); /* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word, * xen_pcibk_write_config_word, and xen_pcibk_write_config_byte are created. */ @@ -262,7 +262,7 @@ int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value) * This means that some fields may still be read-only because * they have entries in the config_field list that intercept * the write and do nothing. */ - if (dev_data->permissive || permissive) { + if (dev_data->permissive || xen_pcibk_permissive) { switch (size) { case 1: err = pci_write_config_byte(dev, offset, diff --git a/drivers/xen/xen-pciback/conf_space.h b/drivers/xen/xen-pciback/conf_space.h index 2e1d73d1d5d0..62461a8ba1d6 100644 --- a/drivers/xen/xen-pciback/conf_space.h +++ b/drivers/xen/xen-pciback/conf_space.h @@ -64,7 +64,7 @@ struct config_field_entry { void *data; }; -extern bool permissive; +extern bool xen_pcibk_permissive; #define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset) diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c index c2260a0456c9..ad3d17d29c81 100644 --- a/drivers/xen/xen-pciback/conf_space_header.c +++ b/drivers/xen/xen-pciback/conf_space_header.c @@ -118,7 +118,7 @@ static int command_write(struct pci_dev *dev, int offset, u16 value, void *data) cmd->val = value; - if (!permissive && (!dev_data || !dev_data->permissive)) + if (!xen_pcibk_permissive && (!dev_data || !dev_data->permissive)) return 0; /* Only allow the guest to control certain bits. */ From 0df48c26d8418c5c9fba63fac15b660d70ca2f1c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2015 15:28:17 -0700 Subject: [PATCH 115/652] tcp: add tcpi_bytes_acked to tcp_info This patch tracks total number of bytes acked for a TCP socket. This is the sum of all changes done to tp->snd_una, and allows for precise tracking of delivered data. RFC4898 named this : tcpEStatsAppHCThruOctetsAcked This is a 64bit field, and can be fetched both from TCP_INFO getsockopt() if one has a handle on a TCP socket, or from inet_diag netlink facility (iproute2/ss patch will follow) Note that tp->bytes_acked was placed near tp->snd_una for best data locality and minimal performance impact. Signed-off-by: Eric Dumazet Acked-by: Yuchung Cheng Cc: Matt Mathis Cc: Eric Salo Cc: Martin Lau Cc: Chris Rapier Signed-off-by: David S. Miller --- include/linux/tcp.h | 4 ++++ include/net/tcp.h | 2 +- include/uapi/linux/tcp.h | 1 + net/ipv4/tcp.c | 6 +++++- net/ipv4/tcp_input.c | 13 +++++++++++-- 5 files changed, 22 insertions(+), 4 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 0caa3a2d4106..0f73b43171da 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -150,6 +150,10 @@ struct tcp_sock { u32 rcv_wup; /* rcv_nxt on last window update sent */ u32 snd_nxt; /* Next sequence we send */ + u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked + * sum(delta(snd_una)), or how many bytes + * were acked. + */ u32 snd_una; /* First byte we want an ack for */ u32 snd_sml; /* Last byte of the most recently transmitted small packet */ u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ diff --git a/include/net/tcp.h b/include/net/tcp.h index 051dc5c2802d..dd7b4ea6a10c 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -576,7 +576,7 @@ static inline int tcp_bound_to_half_wnd(struct tcp_sock *tp, int pktsize) } /* tcp.c */ -void tcp_get_info(const struct sock *, struct tcp_info *); +void tcp_get_info(struct sock *, struct tcp_info *); /* Read 'sendfile()'-style from a TCP socket */ typedef int (*sk_read_actor_t)(read_descriptor_t *, struct sk_buff *, diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 3b9718328d8b..6666e98a0af9 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -189,6 +189,7 @@ struct tcp_info { __u64 tcpi_pacing_rate; __u64 tcpi_max_pacing_rate; + __u64 tcpi_bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked */ }; /* for TCP_MD5SIG socket option */ diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 8c5cd9efebbc..4bf0e8ca7b5b 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2592,7 +2592,7 @@ EXPORT_SYMBOL(compat_tcp_setsockopt); #endif /* Return information about state of tcp endpoint in API format. */ -void tcp_get_info(const struct sock *sk, struct tcp_info *info) +void tcp_get_info(struct sock *sk, struct tcp_info *info) { const struct tcp_sock *tp = tcp_sk(sk); const struct inet_connection_sock *icsk = inet_csk(sk); @@ -2663,6 +2663,10 @@ void tcp_get_info(const struct sock *sk, struct tcp_info *info) rate = READ_ONCE(sk->sk_max_pacing_rate); info->tcpi_max_pacing_rate = rate != ~0U ? rate : ~0ULL; + + spin_lock_bh(&sk->sk_lock.slock); + info->tcpi_bytes_acked = tp->bytes_acked; + spin_unlock_bh(&sk->sk_lock.slock); } EXPORT_SYMBOL_GPL(tcp_get_info); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 3a4d9b34bed4..378d3f4d4dc3 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3280,6 +3280,15 @@ static inline bool tcp_may_update_window(const struct tcp_sock *tp, (ack_seq == tp->snd_wl1 && nwin > tp->snd_wnd); } +/* If we update tp->snd_una, also update tp->bytes_acked */ +static void tcp_snd_una_update(struct tcp_sock *tp, u32 ack) +{ + u32 delta = ack - tp->snd_una; + + tp->bytes_acked += delta; + tp->snd_una = ack; +} + /* Update our send window. * * Window update algorithm, described in RFC793/RFC1122 (used in linux-2.2 @@ -3315,7 +3324,7 @@ static int tcp_ack_update_window(struct sock *sk, const struct sk_buff *skb, u32 } } - tp->snd_una = ack; + tcp_snd_una_update(tp, ack); return flag; } @@ -3497,7 +3506,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) * Note, we use the fact that SND.UNA>=SND.WL2. */ tcp_update_wl(tp, ack_seq); - tp->snd_una = ack; + tcp_snd_una_update(tp, ack); flag |= FLAG_WIN_UPDATE; tcp_in_ack_event(sk, CA_ACK_WIN_UPDATE); From bdd1f9edacb5f5835d1e6276571bbbe5b88ded48 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2015 15:28:18 -0700 Subject: [PATCH 116/652] tcp: add tcpi_bytes_received to tcp_info This patch tracks total number of payload bytes received on a TCP socket. This is the sum of all changes done to tp->rcv_nxt RFC4898 named this : tcpEStatsAppHCThruOctetsReceived This is a 64bit field, and can be fetched both from TCP_INFO getsockopt() if one has a handle on a TCP socket, or from inet_diag netlink facility (iproute2/ss patch will follow) Note that tp->bytes_received was placed near tp->rcv_nxt for best data locality and minimal performance impact. Signed-off-by: Eric Dumazet Cc: Yuchung Cheng Cc: Matt Mathis Cc: Eric Salo Cc: Martin Lau Cc: Chris Rapier Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- include/linux/tcp.h | 4 ++++ include/uapi/linux/tcp.h | 1 + net/ipv4/tcp.c | 1 + net/ipv4/tcp_fastopen.c | 1 + net/ipv4/tcp_input.c | 17 +++++++++++++---- 5 files changed, 20 insertions(+), 4 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 0f73b43171da..3b2911502a8c 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -145,6 +145,10 @@ struct tcp_sock { * read the code and the spec side by side (and laugh ...) * See RFC793 and RFC1122. The RFC writes these in capitals. */ + u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived + * sum(delta(rcv_nxt)), or how many bytes + * were acked. + */ u32 rcv_nxt; /* What we want to receive next */ u32 copied_seq; /* Head of yet unread data */ u32 rcv_wup; /* rcv_nxt on last window update sent */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 6666e98a0af9..a48f93f3207b 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -190,6 +190,7 @@ struct tcp_info { __u64 tcpi_pacing_rate; __u64 tcpi_max_pacing_rate; __u64 tcpi_bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked */ + __u64 tcpi_bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived */ }; /* for TCP_MD5SIG socket option */ diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 4bf0e8ca7b5b..99fcc0b22c92 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2666,6 +2666,7 @@ void tcp_get_info(struct sock *sk, struct tcp_info *info) spin_lock_bh(&sk->sk_lock.slock); info->tcpi_bytes_acked = tp->bytes_acked; + info->tcpi_bytes_received = tp->bytes_received; spin_unlock_bh(&sk->sk_lock.slock); } EXPORT_SYMBOL_GPL(tcp_get_info); diff --git a/net/ipv4/tcp_fastopen.c b/net/ipv4/tcp_fastopen.c index e3d87aca6be8..3c673d5e6cff 100644 --- a/net/ipv4/tcp_fastopen.c +++ b/net/ipv4/tcp_fastopen.c @@ -206,6 +206,7 @@ static bool tcp_fastopen_create_child(struct sock *sk, skb_set_owner_r(skb2, child); __skb_queue_tail(&child->sk_receive_queue, skb2); tp->syn_data_acked = 1; + tp->bytes_received = end_seq - TCP_SKB_CB(skb)->seq - 1; } else { end_seq = TCP_SKB_CB(skb)->seq + 1; } diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 378d3f4d4dc3..7e6962bcfc30 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3289,6 +3289,15 @@ static void tcp_snd_una_update(struct tcp_sock *tp, u32 ack) tp->snd_una = ack; } +/* If we update tp->rcv_nxt, also update tp->bytes_received */ +static void tcp_rcv_nxt_update(struct tcp_sock *tp, u32 seq) +{ + u32 delta = seq - tp->rcv_nxt; + + tp->bytes_received += delta; + tp->rcv_nxt = seq; +} + /* Update our send window. * * Window update algorithm, described in RFC793/RFC1122 (used in linux-2.2 @@ -4245,7 +4254,7 @@ static void tcp_ofo_queue(struct sock *sk) tail = skb_peek_tail(&sk->sk_receive_queue); eaten = tail && tcp_try_coalesce(sk, tail, skb, &fragstolen); - tp->rcv_nxt = TCP_SKB_CB(skb)->end_seq; + tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq); if (!eaten) __skb_queue_tail(&sk->sk_receive_queue, skb); if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN) @@ -4413,7 +4422,7 @@ static int __must_check tcp_queue_rcv(struct sock *sk, struct sk_buff *skb, int __skb_pull(skb, hdrlen); eaten = (tail && tcp_try_coalesce(sk, tail, skb, fragstolen)) ? 1 : 0; - tcp_sk(sk)->rcv_nxt = TCP_SKB_CB(skb)->end_seq; + tcp_rcv_nxt_update(tcp_sk(sk), TCP_SKB_CB(skb)->end_seq); if (!eaten) { __skb_queue_tail(&sk->sk_receive_queue, skb); skb_set_owner_r(skb, sk); @@ -4506,7 +4515,7 @@ queue_and_out: eaten = tcp_queue_rcv(sk, skb, 0, &fragstolen); } - tp->rcv_nxt = TCP_SKB_CB(skb)->end_seq; + tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq); if (skb->len) tcp_event_data_recv(sk, skb); if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN) @@ -5254,7 +5263,7 @@ void tcp_rcv_established(struct sock *sk, struct sk_buff *skb, tcp_rcv_rtt_measure_ts(sk, skb); __skb_pull(skb, tcp_header_len); - tp->rcv_nxt = TCP_SKB_CB(skb)->end_seq; + tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq); NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPHPHITSTOUSER); eaten = 1; } From 64f40ff5bbdb1b679fb3c4dbc8230d6517d2b8dc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2015 16:23:48 -0700 Subject: [PATCH 117/652] tcp: prepare CC get_info() access from getsockopt() We would like that optional info provided by Congestion Control modules using netlink can also be read using getsockopt() This patch changes get_info() to put this information in a buffer, instead of skb, like tcp_get_info(), so that following patch can reuse this common infrastructure. Signed-off-by: Eric Dumazet Cc: Yuchung Cheng Cc: Neal Cardwell Acked-by: Neal Cardwell Acked-by: Daniel Borkmann Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- include/net/tcp.h | 5 ++++- include/uapi/linux/inet_diag.h | 4 ++++ net/ipv4/inet_diag.c | 8 +++++--- net/ipv4/tcp_dctcp.c | 20 ++++++++++---------- net/ipv4/tcp_illinois.c | 21 +++++++++++---------- net/ipv4/tcp_vegas.c | 19 ++++++++++--------- net/ipv4/tcp_vegas.h | 3 ++- 7 files changed, 46 insertions(+), 34 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index dd7b4ea6a10c..6d204f3f9df8 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -804,6 +804,8 @@ enum tcp_ca_ack_event_flags { /* Requires ECN/ECT set on all packets */ #define TCP_CONG_NEEDS_ECN 0x2 +union tcp_cc_info; + struct tcp_congestion_ops { struct list_head list; u32 key; @@ -829,7 +831,8 @@ struct tcp_congestion_ops { /* hook for packet ack accounting (optional) */ void (*pkts_acked)(struct sock *sk, u32 num_acked, s32 rtt_us); /* get info for inet_diag (optional) */ - int (*get_info)(struct sock *sk, u32 ext, struct sk_buff *skb); + size_t (*get_info)(struct sock *sk, u32 ext, int *attr, + union tcp_cc_info *info); char name[TCP_CA_NAME_MAX]; struct module *owner; diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index d65c0a09efd3..c7093c75bdd6 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -143,4 +143,8 @@ struct tcp_dctcp_info { __u32 dctcp_ab_tot; }; +union tcp_cc_info { + struct tcpvegas_info vegas; + struct tcp_dctcp_info dctcp; +}; #endif /* _UAPI_INET_DIAG_H_ */ diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index bb77ebdae3b3..4d32262c7502 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -224,14 +224,16 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk, handler->idiag_get_info(sk, r, info); if (sk->sk_state < TCP_TIME_WAIT) { - int err = 0; + union tcp_cc_info info; + size_t sz = 0; + int attr; rcu_read_lock(); ca_ops = READ_ONCE(icsk->icsk_ca_ops); if (ca_ops && ca_ops->get_info) - err = ca_ops->get_info(sk, ext, skb); + sz = ca_ops->get_info(sk, ext, &attr, &info); rcu_read_unlock(); - if (err < 0) + if (sz && nla_put(skb, attr, sz, &info) < 0) goto errout; } diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 4376016f7fa5..4c41c1287197 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -277,7 +277,8 @@ static void dctcp_cwnd_event(struct sock *sk, enum tcp_ca_event ev) } } -static int dctcp_get_info(struct sock *sk, u32 ext, struct sk_buff *skb) +static size_t dctcp_get_info(struct sock *sk, u32 ext, int *attr, + union tcp_cc_info *info) { const struct dctcp *ca = inet_csk_ca(sk); @@ -286,18 +287,17 @@ static int dctcp_get_info(struct sock *sk, u32 ext, struct sk_buff *skb) */ if (ext & (1 << (INET_DIAG_DCTCPINFO - 1)) || ext & (1 << (INET_DIAG_VEGASINFO - 1))) { - struct tcp_dctcp_info info; - - memset(&info, 0, sizeof(info)); + memset(info, 0, sizeof(struct tcp_dctcp_info)); if (inet_csk(sk)->icsk_ca_ops != &dctcp_reno) { - info.dctcp_enabled = 1; - info.dctcp_ce_state = (u16) ca->ce_state; - info.dctcp_alpha = ca->dctcp_alpha; - info.dctcp_ab_ecn = ca->acked_bytes_ecn; - info.dctcp_ab_tot = ca->acked_bytes_total; + info->dctcp.dctcp_enabled = 1; + info->dctcp.dctcp_ce_state = (u16) ca->ce_state; + info->dctcp.dctcp_alpha = ca->dctcp_alpha; + info->dctcp.dctcp_ab_ecn = ca->acked_bytes_ecn; + info->dctcp.dctcp_ab_tot = ca->acked_bytes_total; } - return nla_put(skb, INET_DIAG_DCTCPINFO, sizeof(info), &info); + *attr = INET_DIAG_DCTCPINFO; + return sizeof(*info); } return 0; } diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c index 67476f085e48..f71002e4db0b 100644 --- a/net/ipv4/tcp_illinois.c +++ b/net/ipv4/tcp_illinois.c @@ -300,24 +300,25 @@ static u32 tcp_illinois_ssthresh(struct sock *sk) } /* Extract info for Tcp socket info provided via netlink. */ -static int tcp_illinois_info(struct sock *sk, u32 ext, struct sk_buff *skb) +static size_t tcp_illinois_info(struct sock *sk, u32 ext, int *attr, + union tcp_cc_info *info) { const struct illinois *ca = inet_csk_ca(sk); if (ext & (1 << (INET_DIAG_VEGASINFO - 1))) { - struct tcpvegas_info info = { - .tcpv_enabled = 1, - .tcpv_rttcnt = ca->cnt_rtt, - .tcpv_minrtt = ca->base_rtt, - }; + info->vegas.tcpv_enabled = 1; + info->vegas.tcpv_rttcnt = ca->cnt_rtt; + info->vegas.tcpv_minrtt = ca->base_rtt; + info->vegas.tcpv_rtt = 0; - if (info.tcpv_rttcnt > 0) { + if (info->vegas.tcpv_rttcnt > 0) { u64 t = ca->sum_rtt; - do_div(t, info.tcpv_rttcnt); - info.tcpv_rtt = t; + do_div(t, info->vegas.tcpv_rttcnt); + info->vegas.tcpv_rtt = t; } - return nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info); + *attr = INET_DIAG_VEGASINFO; + return sizeof(struct tcpvegas_info); } return 0; } diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c index c71a1b8f7bde..a6cea1d5e20d 100644 --- a/net/ipv4/tcp_vegas.c +++ b/net/ipv4/tcp_vegas.c @@ -286,18 +286,19 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked) } /* Extract info for Tcp socket info provided via netlink. */ -int tcp_vegas_get_info(struct sock *sk, u32 ext, struct sk_buff *skb) +size_t tcp_vegas_get_info(struct sock *sk, u32 ext, int *attr, + union tcp_cc_info *info) { const struct vegas *ca = inet_csk_ca(sk); - if (ext & (1 << (INET_DIAG_VEGASINFO - 1))) { - struct tcpvegas_info info = { - .tcpv_enabled = ca->doing_vegas_now, - .tcpv_rttcnt = ca->cntRTT, - .tcpv_rtt = ca->baseRTT, - .tcpv_minrtt = ca->minRTT, - }; - return nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info); + if (ext & (1 << (INET_DIAG_VEGASINFO - 1))) { + info->vegas.tcpv_enabled = ca->doing_vegas_now, + info->vegas.tcpv_rttcnt = ca->cntRTT, + info->vegas.tcpv_rtt = ca->baseRTT, + info->vegas.tcpv_minrtt = ca->minRTT, + + *attr = INET_DIAG_VEGASINFO; + return sizeof(struct tcpvegas_info); } return 0; } diff --git a/net/ipv4/tcp_vegas.h b/net/ipv4/tcp_vegas.h index e8a6b33cc61d..ef9da5306c68 100644 --- a/net/ipv4/tcp_vegas.h +++ b/net/ipv4/tcp_vegas.h @@ -19,6 +19,7 @@ void tcp_vegas_init(struct sock *sk); void tcp_vegas_state(struct sock *sk, u8 ca_state); void tcp_vegas_pkts_acked(struct sock *sk, u32 cnt, s32 rtt_us); void tcp_vegas_cwnd_event(struct sock *sk, enum tcp_ca_event event); -int tcp_vegas_get_info(struct sock *sk, u32 ext, struct sk_buff *skb); +size_t tcp_vegas_get_info(struct sock *sk, u32 ext, int *attr, + union tcp_cc_info *info); #endif /* __TCP_VEGAS_H */ From 6e9250f59ef9efb932c84850cd221f22c2a03c4a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2015 16:23:49 -0700 Subject: [PATCH 118/652] tcp: add TCP_CC_INFO socket option Some Congestion Control modules can provide per flow information, but current way to get this information is to use netlink. Like TCP_INFO, let's add TCP_CC_INFO so that applications can issue a getsockopt() if they have a socket file descriptor, instead of playing complex netlink games. Sample usage would be : union tcp_cc_info info; socklen_t len = sizeof(info); if (getsockopt(fd, SOL_TCP, TCP_CC_INFO, &info, &len) == -1) Signed-off-by: Eric Dumazet Cc: Yuchung Cheng Cc: Neal Cardwell Acked-by: Neal Cardwell Acked-by: Daniel Borkmann Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 1 + net/ipv4/tcp.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index a48f93f3207b..faa72f4fa547 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -112,6 +112,7 @@ enum { #define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ #define TCP_TIMESTAMP 24 #define TCP_NOTSENT_LOWAT 25 /* limit number of unsent bytes in write queue */ +#define TCP_CC_INFO 26 /* Get Congestion Control (optional) info */ struct tcp_repair_opt { __u32 opt_code; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 99fcc0b22c92..46efa03d2b11 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -252,6 +252,7 @@ #include #include #include +#include #include #include #include @@ -2739,6 +2740,26 @@ static int do_tcp_getsockopt(struct sock *sk, int level, return -EFAULT; return 0; } + case TCP_CC_INFO: { + const struct tcp_congestion_ops *ca_ops; + union tcp_cc_info info; + size_t sz = 0; + int attr; + + if (get_user(len, optlen)) + return -EFAULT; + + ca_ops = icsk->icsk_ca_ops; + if (ca_ops && ca_ops->get_info) + sz = ca_ops->get_info(sk, ~0U, &attr, &info); + + len = min_t(unsigned int, len, sz); + if (put_user(len, optlen)) + return -EFAULT; + if (copy_to_user(optval, &info, len)) + return -EFAULT; + return 0; + } case TCP_QUICKACK: val = !icsk->icsk_ack.pingpong; break; From 9dac8835440622c2f84591673969d510ce198c11 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 29 Apr 2015 11:28:30 -0700 Subject: [PATCH 119/652] tcp: update reordering first before detecting loss tcp_mark_lost_retrans is not used when FACK is disabled. Since tcp_update_reordering may disable FACK, it should be called first before tcp_mark_lost_retrans. Signed-off-by: Yuchung Cheng Signed-off-by: Nandita Dukkipati Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 7e6962bcfc30..bc790ea9960f 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1820,14 +1820,12 @@ advance_sp: for (j = 0; j < used_sacks; j++) tp->recv_sack_cache[i++] = sp[j]; - tcp_mark_lost_retrans(sk); - - tcp_verify_left_out(tp); - if ((state.reord < tp->fackets_out) && ((inet_csk(sk)->icsk_ca_state != TCP_CA_Loss) || tp->undo_marker)) tcp_update_reordering(sk, tp->fackets_out - state.reord, 0); + tcp_mark_lost_retrans(sk); + tcp_verify_left_out(tp); out: #if FASTRETRANS_DEBUG > 0 From 483d821108791092798f5d230686868112927044 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 21 Apr 2015 17:42:09 +0200 Subject: [PATCH 120/652] gpio: sysfs: fix memory leaks and device hotplug Unregister GPIOs requested through sysfs at chip remove to avoid leaking the associated memory and sysfs entries. The stale sysfs entries prevented the gpio numbers from being exported when the gpio range was later reused (e.g. at device reconnect). This also fixes the related module-reference leak. Note that kernfs makes sure that any on-going sysfs operations finish before the class devices are unregistered and that further accesses fail. The chip exported flag is used to prevent gpiod exports during removal. This also makes it harder to trigger, but does not fix, the related race between gpiochip_remove and export_store, which is really a race with gpiod_request that needs to be addressed separately. Also note that this would prevent the crashes (e.g. NULL-dereferences) at reconnect that affects pre-3.18 kernels, as well as use-after-free on operations on open attribute files on pre-3.14 kernels (prior to kernfs). Fixes: d8f388d8dc8d ("gpio: sysfs interface") Cc: stable # v2.6.27: 01cca93a9491 Signed-off-by: Johan Hovold Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-sysfs.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index 7722ed53bd65..af3bc7a8033b 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -551,6 +551,7 @@ static struct class gpio_class = { */ int gpiod_export(struct gpio_desc *desc, bool direction_may_change) { + struct gpio_chip *chip; unsigned long flags; int status; const char *ioname = NULL; @@ -568,8 +569,16 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change) return -EINVAL; } + chip = desc->chip; + mutex_lock(&sysfs_lock); + /* check if chip is being removed */ + if (!chip || !chip->exported) { + status = -ENODEV; + goto fail_unlock; + } + spin_lock_irqsave(&gpio_lock, flags); if (!test_bit(FLAG_REQUESTED, &desc->flags) || test_bit(FLAG_EXPORT, &desc->flags)) { @@ -783,12 +792,15 @@ void gpiochip_unexport(struct gpio_chip *chip) { int status; struct device *dev; + struct gpio_desc *desc; + unsigned int i; mutex_lock(&sysfs_lock); dev = class_find_device(&gpio_class, NULL, chip, match_export); if (dev) { put_device(dev); device_unregister(dev); + /* prevent further gpiod exports */ chip->exported = false; status = 0; } else @@ -797,6 +809,13 @@ void gpiochip_unexport(struct gpio_chip *chip) if (status) chip_dbg(chip, "%s: status %d\n", __func__, status); + + /* unregister gpiod class devices owned by sysfs */ + for (i = 0; i < chip->ngpio; i++) { + desc = &chip->desc[i]; + if (test_and_clear_bit(FLAG_SYSFS, &desc->flags)) + gpiod_free(desc); + } } static int __init gpiolib_sysfs_init(void) From 16e5c47a0f90a37cf8b8d50b5eaf3cd3f7ed9530 Mon Sep 17 00:00:00 2001 From: DingXiang Date: Fri, 10 Apr 2015 16:45:58 +0800 Subject: [PATCH 121/652] Bluetooth: bt3c: Delete some unuseful comments I think the comments are used to debug, and we don't need them in mainline code Signed-off-by: DingXiang Signed-off-by: Marcel Holtmann --- drivers/bluetooth/bt3c_cs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 4f7e8d400bc0..6de97b3871b0 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -227,7 +227,6 @@ static void bt3c_receive(struct bt3c_info *info) iobase = info->p_dev->resource[0]->start; avail = bt3c_read(iobase, 0x7006); - //printk("bt3c_cs: receiving %d bytes\n", avail); bt3c_address(iobase, 0x7480); while (size < avail) { @@ -250,7 +249,6 @@ static void bt3c_receive(struct bt3c_info *info) bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L); inb(iobase + DATA_H); - //printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type); switch (bt_cb(info->rx_skb)->pkt_type) { @@ -364,7 +362,6 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) if (stat & 0x0001) bt3c_receive(info); if (stat & 0x0002) { - //BT_ERR("Ack (stat=0x%04x)", stat); clear_bit(XMIT_SENDING, &(info->tx_state)); bt3c_write_wakeup(info); } From 50862ee5578efa342a25c8b86f0080494736057f Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 10 Apr 2015 14:02:20 -0700 Subject: [PATCH 122/652] Bluetooth: btbcm: Export patchram download as separate function This isolates the Broadcom patchram download procedure as separate function so that it can be easily used from USB and UART based drivers. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/btbcm.c | 148 ++++++++++++++++++++------------------ drivers/bluetooth/btbcm.h | 6 ++ 2 files changed, 85 insertions(+), 69 deletions(-) diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index d0741f3ed7ec..4bba86677adc 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -95,6 +95,78 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) } EXPORT_SYMBOL_GPL(btbcm_set_bdaddr); +int btbcm_patchram(struct hci_dev *hdev, const char *firmware) +{ + const struct hci_command_hdr *cmd; + const struct firmware *fw; + const u8 *fw_ptr; + size_t fw_size; + struct sk_buff *skb; + u16 opcode; + int err; + + err = request_firmware(&fw, firmware, &hdev->dev); + if (err < 0) { + BT_INFO("%s: BCM: Patch %s not found", hdev->name, firmware); + return err; + } + + /* Start Download */ + skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: BCM: Download Minidrv command failed (%d)", + hdev->name, err); + goto done; + } + kfree_skb(skb); + + /* 50 msec delay after Download Minidrv completes */ + msleep(50); + + fw_ptr = fw->data; + fw_size = fw->size; + + while (fw_size >= sizeof(*cmd)) { + const u8 *cmd_param; + + cmd = (struct hci_command_hdr *)fw_ptr; + fw_ptr += sizeof(*cmd); + fw_size -= sizeof(*cmd); + + if (fw_size < cmd->plen) { + BT_ERR("%s: BCM: Patch %s is corrupted", hdev->name, + firmware); + err = -EINVAL; + goto done; + } + + cmd_param = fw_ptr; + fw_ptr += cmd->plen; + fw_size -= cmd->plen; + + opcode = le16_to_cpu(cmd->opcode); + + skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: BCM: Patch command %04x failed (%d)", + hdev->name, opcode, err); + goto done; + } + kfree_skb(skb); + } + + /* 250 msec delay after Launch Ram completes */ + msleep(250); + +done: + release_firmware(fw); + return err; +} +EXPORT_SYMBOL(btbcm_patchram); + static int btbcm_reset(struct hci_dev *hdev) { struct sk_buff *skb; @@ -198,12 +270,8 @@ static const struct { int btbcm_setup_patchram(struct hci_dev *hdev) { - const struct hci_command_hdr *cmd; - const struct firmware *fw; - const u8 *fw_ptr; - size_t fw_size; char fw_name[64]; - u16 opcode, subver, rev, pid, vid; + u16 subver, rev, pid, vid; const char *hw_name = NULL; struct sk_buff *skb; struct hci_rp_read_local_version *ver; @@ -273,74 +341,19 @@ int btbcm_setup_patchram(struct hci_dev *hdev) hw_name ? : "BCM", (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff); - err = request_firmware(&fw, fw_name, &hdev->dev); - if (err < 0) { - BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name); + err = btbcm_patchram(hdev, fw_name); + if (err == -ENOENT) return 0; - } - /* Start Download */ - skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - BT_ERR("%s: BCM: Download Minidrv command failed (%d)", - hdev->name, err); - goto reset; - } - kfree_skb(skb); - - /* 50 msec delay after Download Minidrv completes */ - msleep(50); - - fw_ptr = fw->data; - fw_size = fw->size; - - while (fw_size >= sizeof(*cmd)) { - const u8 *cmd_param; - - cmd = (struct hci_command_hdr *)fw_ptr; - fw_ptr += sizeof(*cmd); - fw_size -= sizeof(*cmd); - - if (fw_size < cmd->plen) { - BT_ERR("%s: BCM: patch %s is corrupted", hdev->name, - fw_name); - err = -EINVAL; - goto reset; - } - - cmd_param = fw_ptr; - fw_ptr += cmd->plen; - fw_size -= cmd->plen; - - opcode = le16_to_cpu(cmd->opcode); - - skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, - HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - BT_ERR("%s: BCM: patch command %04x failed (%d)", - hdev->name, opcode, err); - goto reset; - } - kfree_skb(skb); - } - - /* 250 msec delay after Launch Ram completes */ - msleep(250); - -reset: /* Reset */ err = btbcm_reset(hdev); if (err) - goto done; + return err; /* Read Local Version Info */ skb = btbcm_read_local_version(hdev); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - goto done; - } + if (IS_ERR(skb)) + return PTR_ERR(skb); ver = (struct hci_rp_read_local_version *)skb->data; rev = le16_to_cpu(ver->hci_rev); @@ -355,10 +368,7 @@ reset: set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); -done: - release_firmware(fw); - - return err; + return 0; } EXPORT_SYMBOL_GPL(btbcm_setup_patchram); diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h index 34268ae3eb46..eb6ab5f9483d 100644 --- a/drivers/bluetooth/btbcm.h +++ b/drivers/bluetooth/btbcm.h @@ -25,6 +25,7 @@ int btbcm_check_bdaddr(struct hci_dev *hdev); int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr); +int btbcm_patchram(struct hci_dev *hdev, const char *firmware); int btbcm_setup_patchram(struct hci_dev *hdev); int btbcm_setup_apple(struct hci_dev *hdev); @@ -41,6 +42,11 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) return -EOPNOTSUPP; } +static inline int btbcm_patchram(struct hci_dev *hdev, const char *firmware) +{ + return -EOPNOTSUPP; +} + static inline int btbcm_setup_patchram(struct hci_dev *hdev) { return 0; From c0ba7acd48d122fe5941c8f402fc1ee024cac6fb Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 11 Apr 2015 05:35:37 -0700 Subject: [PATCH 123/652] Bluetooth: hci_uart: Reorder Atheros specific driver callbacks The driver callbacks in the Atheros support were all in a random order and did not help readability of this driver. So reorder them to make them aligned with what other Bluetooth UART drivers do. This patch is not changing any actual code. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/hci_ath.c | 74 +++++++++++++++++-------------------- 1 file changed, 34 insertions(+), 40 deletions(-) diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 1b3f8647ea2f..42f13d0b437f 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -95,7 +95,6 @@ static void ath_hci_uart_work(struct work_struct *work) hci_uart_tx_wakeup(hu); } -/* Initialize protocol */ static int ath_open(struct hci_uart *hu) { struct ath_struct *ath; @@ -116,19 +115,6 @@ static int ath_open(struct hci_uart *hu) return 0; } -/* Flush protocol data */ -static int ath_flush(struct hci_uart *hu) -{ - struct ath_struct *ath = hu->priv; - - BT_DBG("hu %p", hu); - - skb_queue_purge(&ath->txq); - - return 0; -} - -/* Close protocol */ static int ath_close(struct hci_uart *hu) { struct ath_struct *ath = hu->priv; @@ -147,9 +133,40 @@ static int ath_close(struct hci_uart *hu) return 0; } +static int ath_flush(struct hci_uart *hu) +{ + struct ath_struct *ath = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&ath->txq); + + return 0; +} + +static const struct h4_recv_pkt ath_recv_pkts[] = { + { H4_RECV_ACL, .recv = hci_recv_frame }, + { H4_RECV_SCO, .recv = hci_recv_frame }, + { H4_RECV_EVENT, .recv = hci_recv_frame }, +}; + +static int ath_recv(struct hci_uart *hu, const void *data, int count) +{ + struct ath_struct *ath = hu->priv; + + ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count, + ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts)); + if (IS_ERR(ath->rx_skb)) { + int err = PTR_ERR(ath->rx_skb); + BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err); + return err; + } + + return count; +} + #define HCI_OP_ATH_SLEEP 0xFC04 -/* Enqueue frame for transmittion */ static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb) { struct ath_struct *ath = hu->priv; @@ -159,8 +176,7 @@ static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb) return 0; } - /* - * Update power management enable flag with parameters of + /* Update power management enable flag with parameters of * HCI sleep enable vendor specific HCI command. */ if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { @@ -190,37 +206,15 @@ static struct sk_buff *ath_dequeue(struct hci_uart *hu) return skb_dequeue(&ath->txq); } -static const struct h4_recv_pkt ath_recv_pkts[] = { - { H4_RECV_ACL, .recv = hci_recv_frame }, - { H4_RECV_SCO, .recv = hci_recv_frame }, - { H4_RECV_EVENT, .recv = hci_recv_frame }, -}; - -/* Recv data */ -static int ath_recv(struct hci_uart *hu, const void *data, int count) -{ - struct ath_struct *ath = hu->priv; - - ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count, - ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts)); - if (IS_ERR(ath->rx_skb)) { - int err = PTR_ERR(ath->rx_skb); - BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err); - return err; - } - - return count; -} - static const struct hci_uart_proto athp = { .id = HCI_UART_ATH3K, .name = "ATH3K", .open = ath_open, .close = ath_close, + .flush = ath_flush, .recv = ath_recv, .enqueue = ath_enqueue, .dequeue = ath_dequeue, - .flush = ath_flush, }; int __init ath_init(void) From 4c876c0edbdc28de751dc4b4583dcbfc290a2293 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 11 Apr 2015 05:35:38 -0700 Subject: [PATCH 124/652] Bluetooth: hci_uart: Add Atheros support for address configuration The Atheros support for missing the support for configuration of the Bluetooth public address. Add support for the vendor specific command. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/hci_ath.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 42f13d0b437f..ec8fa0e0f036 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -144,6 +144,39 @@ static int ath_flush(struct hci_uart *hu) return 0; } +static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 buf[10]; + int err; + + buf[0] = 0x01; + buf[1] = 0x01; + buf[2] = 0x00; + buf[3] = sizeof(bdaddr_t); + memcpy(buf + 4, bdaddr, sizeof(bdaddr_t)); + + skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: Change address command failed (%d)", + hdev->name, err); + return err; + } + kfree_skb(skb); + + return 0; +} + +static int ath_setup(struct hci_uart *hu) +{ + BT_DBG("hu %p", hu); + + hu->hdev->set_bdaddr = ath_set_bdaddr; + + return 0; +} + static const struct h4_recv_pkt ath_recv_pkts[] = { { H4_RECV_ACL, .recv = hci_recv_frame }, { H4_RECV_SCO, .recv = hci_recv_frame }, @@ -212,6 +245,7 @@ static const struct hci_uart_proto athp = { .open = ath_open, .close = ath_close, .flush = ath_flush, + .setup = ath_setup, .recv = ath_recv, .enqueue = ath_enqueue, .dequeue = ath_dequeue, From a2698a9bf9b0cfcf7e556946e04c4456a13a6f5a Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 16 Apr 2015 14:09:55 -0600 Subject: [PATCH 125/652] Bluetooth: btusb: Add Realtek 8723A/8723B/8761A/8821A support Realtek ship a variety of bluetooth USB devices that identify themselves with standard USB Bluetooth device class values, but require a special driver to actually work. Without that driver, you never get any scan results. More recently however, Realtek appear to have wisened up and simply posted a firmware update that makes these devices comply with normal btusb protocols. The firmware needs to be uploaded on each boot. Based on Realtek code from https://github.com/lwfinger/rtl8723au_bt ('new' branch). This enables bluetooth support in the Gigabyte Brix GB-BXBT-2807 which has this RTL8723BE USB device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3410 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms There is no change to the USB descriptor after firmware update, however the version read by HCI_OP_READ_LOCAL_VERSION changes from 0x8723 to 0x3083. This has also been tested on RTL8723AE and RTL8821AE. Support for RTL8761A has also been added, but that is untested. Signed-off-by: Daniel Drake Tested-by: Larry Finger Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 399 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 399 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index de7b236eeae7..84f998532117 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -57,6 +58,7 @@ static struct usb_driver btusb_driver; #define BTUSB_AMP 0x4000 #define BTUSB_QCA_ROME 0x8000 #define BTUSB_BCM_APPLE 0x10000 +#define BTUSB_REALTEK 0x20000 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -288,6 +290,28 @@ static const struct usb_device_id blacklist_table[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), .driver_info = BTUSB_IGNORE }, + /* Realtek Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723AE Bluetooth devices */ + { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723BE Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8821AE Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK }, + { } /* Terminating entry */ }; @@ -1345,6 +1369,378 @@ static int btusb_setup_csr(struct hci_dev *hdev) return ret; } +#define RTL_FRAG_LEN 252 + +struct rtl_download_cmd { + __u8 index; + __u8 data[RTL_FRAG_LEN]; +} __packed; + +struct rtl_download_response { + __u8 status; + __u8 index; +} __packed; + +struct rtl_rom_version_evt { + __u8 status; + __u8 version; +} __packed; + +struct rtl_epatch_header { + __u8 signature[8]; + __le32 fw_version; + __le16 num_patches; +} __packed; + +#define RTL_EPATCH_SIGNATURE "Realtech" +#define RTL_ROM_LMP_3499 0x3499 +#define RTL_ROM_LMP_8723A 0x1200 +#define RTL_ROM_LMP_8723B 0x8723 +#define RTL_ROM_LMP_8821A 0x8821 +#define RTL_ROM_LMP_8761A 0x8761 + +static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) +{ + struct rtl_rom_version_evt *rom_version; + struct sk_buff *skb; + int ret; + + /* Read RTL ROM version command */ + skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Read ROM version failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*rom_version)) { + BT_ERR("%s: RTL version event length mismatch", hdev->name); + kfree_skb(skb); + return -EIO; + } + + rom_version = (struct rtl_rom_version_evt *)skb->data; + BT_INFO("%s: rom_version status=%x version=%x", + hdev->name, rom_version->status, rom_version->version); + + ret = rom_version->status; + if (ret == 0) + *version = rom_version->version; + + kfree_skb(skb); + return ret; +} + +static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, + const struct firmware *fw, + unsigned char **_buf) +{ + const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; + struct rtl_epatch_header *epatch_info; + unsigned char *buf; + int i, ret, len; + size_t min_size; + u8 opcode, length, data, rom_version = 0; + int project_id = -1; + const unsigned char *fwptr, *chip_id_base; + const unsigned char *patch_length_base, *patch_offset_base; + u32 patch_offset = 0; + u16 patch_length, num_patches; + const u16 project_id_to_lmp_subver[] = { + RTL_ROM_LMP_8723A, + RTL_ROM_LMP_8723B, + RTL_ROM_LMP_8821A, + RTL_ROM_LMP_8761A + }; + + ret = rtl_read_rom_version(hdev, &rom_version); + if (ret) + return -bt_to_errno(ret); + + min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; + if (fw->size < min_size) + return -EINVAL; + + fwptr = fw->data + fw->size - sizeof(extension_sig); + if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { + BT_ERR("%s: extension section signature mismatch", hdev->name); + return -EINVAL; + } + + /* Loop from the end of the firmware parsing instructions, until + * we find an instruction that identifies the "project ID" for the + * hardware supported by this firwmare file. + * Once we have that, we double-check that that project_id is suitable + * for the hardware we are working with. + */ + while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) { + opcode = *--fwptr; + length = *--fwptr; + data = *--fwptr; + + BT_DBG("check op=%x len=%x data=%x", opcode, length, data); + + if (opcode == 0xff) /* EOF */ + break; + + if (length == 0) { + BT_ERR("%s: found instruction with length 0", + hdev->name); + return -EINVAL; + } + + if (opcode == 0 && length == 1) { + project_id = data; + break; + } + + fwptr -= length; + } + + if (project_id < 0) { + BT_ERR("%s: failed to find version instruction", hdev->name); + return -EINVAL; + } + + if (project_id > ARRAY_SIZE(project_id_to_lmp_subver)) { + BT_ERR("%s: unknown project id %d", hdev->name, project_id); + return -EINVAL; + } + + if (lmp_subver != project_id_to_lmp_subver[project_id]) { + BT_ERR("%s: firmware is for %x but this is a %x", hdev->name, + project_id_to_lmp_subver[project_id], lmp_subver); + return -EINVAL; + } + + epatch_info = (struct rtl_epatch_header *)fw->data; + if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { + BT_ERR("%s: bad EPATCH signature", hdev->name); + return -EINVAL; + } + + num_patches = le16_to_cpu(epatch_info->num_patches); + BT_DBG("fw_version=%x, num_patches=%d", + le32_to_cpu(epatch_info->fw_version), num_patches); + + /* After the rtl_epatch_header there is a funky patch metadata section. + * Assuming 2 patches, the layout is: + * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 + * + * Find the right patch for this chip. + */ + min_size += 8 * num_patches; + if (fw->size < min_size) + return -EINVAL; + + chip_id_base = fw->data + sizeof(struct rtl_epatch_header); + patch_length_base = chip_id_base + (sizeof(u16) * num_patches); + patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); + for (i = 0; i < num_patches; i++) { + u16 chip_id = get_unaligned_le16(chip_id_base + + (i * sizeof(u16))); + if (chip_id == rom_version + 1) { + patch_length = get_unaligned_le16(patch_length_base + + (i * sizeof(u16))); + patch_offset = get_unaligned_le32(patch_offset_base + + (i * sizeof(u32))); + break; + } + } + + if (!patch_offset) { + BT_ERR("%s: didn't find patch for chip id %d", + hdev->name, rom_version); + return -EINVAL; + } + + BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); + min_size = patch_offset + patch_length; + if (fw->size < min_size) + return -EINVAL; + + /* Copy the firmware into a new buffer and write the version at + * the end. + */ + len = patch_length; + buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); + + *_buf = buf; + return len; +} + +static int rtl_download_firmware(struct hci_dev *hdev, + const unsigned char *data, int fw_len) +{ + struct rtl_download_cmd *dl_cmd; + int frag_num = fw_len / RTL_FRAG_LEN + 1; + int frag_len = RTL_FRAG_LEN; + int ret = 0; + int i; + + dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); + if (!dl_cmd) + return -ENOMEM; + + for (i = 0; i < frag_num; i++) { + struct rtl_download_response *dl_resp; + struct sk_buff *skb; + + BT_DBG("download fw (%d/%d)", i, frag_num); + + dl_cmd->index = i; + if (i == (frag_num - 1)) { + dl_cmd->index |= 0x80; /* data end */ + frag_len = fw_len % RTL_FRAG_LEN; + } + memcpy(dl_cmd->data, data, frag_len); + + /* Send download command */ + skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: download fw command failed (%ld)", + hdev->name, PTR_ERR(skb)); + ret = -PTR_ERR(skb); + goto out; + } + + if (skb->len != sizeof(*dl_resp)) { + BT_ERR("%s: download fw event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto out; + } + + dl_resp = (struct rtl_download_response *)skb->data; + if (dl_resp->status != 0) { + kfree_skb(skb); + ret = bt_to_errno(dl_resp->status); + goto out; + } + + kfree_skb(skb); + data += RTL_FRAG_LEN; + } + +out: + kfree(dl_cmd); + return ret; +} + +static int btusb_setup_rtl8723a(struct hci_dev *hdev) +{ + struct btusb_data *data = dev_get_drvdata(&hdev->dev); + struct usb_device *udev = interface_to_usbdev(data->intf); + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name); + ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name); + return ret; + } + + if (fw->size < 8) { + ret = -EINVAL; + goto out; + } + + /* Check that the firmware doesn't have the epatch signature + * (which is only for RTL8723B and newer). + */ + if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) { + BT_ERR("%s: unexpected EPATCH signature!", hdev->name); + ret = -EINVAL; + goto out; + } + + ret = rtl_download_firmware(hdev, fw->data, fw->size); + +out: + release_firmware(fw); + return ret; +} + +static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver, + const char *fw_name) +{ + struct btusb_data *data = dev_get_drvdata(&hdev->dev); + struct usb_device *udev = interface_to_usbdev(data->intf); + unsigned char *fw_data = NULL; + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading %s", hdev->name, fw_name); + ret = request_firmware(&fw, fw_name, &udev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load %s", hdev->name, fw_name); + return ret; + } + + ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data); + if (ret < 0) + goto out; + + ret = rtl_download_firmware(hdev, fw_data, ret); + kfree(fw_data); + if (ret < 0) + goto out; + +out: + release_firmware(fw); + return ret; +} + +static int btusb_setup_realtek(struct hci_dev *hdev) +{ + struct sk_buff *skb; + struct hci_rp_read_local_version *resp; + u16 lmp_subver; + + skb = btusb_read_local_version(hdev); + if (IS_ERR(skb)) + return -PTR_ERR(skb); + + resp = (struct hci_rp_read_local_version *)skb->data; + BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev, + resp->lmp_ver, resp->lmp_subver); + + lmp_subver = le16_to_cpu(resp->lmp_subver); + kfree_skb(skb); + + /* Match a set of subver values that correspond to stock firmware, + * which is not compatible with standard btusb. + * If matched, upload an alternative firmware that does conform to + * standard btusb. Once that firmware is uploaded, the subver changes + * to a different value. + */ + switch (lmp_subver) { + case RTL_ROM_LMP_8723A: + case RTL_ROM_LMP_3499: + return btusb_setup_rtl8723a(hdev); + case RTL_ROM_LMP_8723B: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8723b_fw.bin"); + case RTL_ROM_LMP_8821A: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8821a_fw.bin"); + case RTL_ROM_LMP_8761A: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8761a_fw.bin"); + default: + BT_INFO("rtl: assuming no firmware upload needed."); + return 0; + } +} + static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, struct intel_version *ver) { @@ -2776,6 +3172,9 @@ static int btusb_probe(struct usb_interface *intf, hdev->set_bdaddr = btusb_set_bdaddr_ath3012; } + if (id->driver_info & BTUSB_REALTEK) + hdev->setup = btusb_setup_realtek; + if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ data->isoc = NULL; From eb50042fd2a9ed3cecc8f9e6799b8e11b4726f94 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 16 Apr 2015 23:15:50 +0200 Subject: [PATCH 126/652] Bluetooth: btusb: Fix two coding style issues ERROR: spaces required around that '<' (ctx:WxV) + if (err <0) ^ ERROR: code indent should use tabs where possible +^I^I^I^I sizeof(ver));$ Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/btusb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 84f998532117..920f6fbd28ac 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -916,7 +916,7 @@ static int btusb_open(struct hci_dev *hdev) */ if (data->setup_on_usb) { err = data->setup_on_usb(hdev); - if (err <0) + if (err < 0) return err; } @@ -2973,7 +2973,7 @@ static int btusb_setup_qca(struct hci_dev *hdev) int i, err; err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, - sizeof(ver)); + sizeof(ver)); if (err < 0) return err; From c57ddfaea6ec8b1d96f863f7fcfc5554b5dc44c7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 20 Apr 2015 18:51:35 +0300 Subject: [PATCH 127/652] Bluetooth: btusb: off by one in rtl8723b_parse_firmware() The ">" should be ">=" so that we don't read past the end of the array. Fixes: 9d9a113e3695 ('Bluetooth: btusb: Add Realtek 8723A/8723B/8761A/8821A support') Signed-off-by: Dan Carpenter Reviewed-by: Daniel Drake Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 920f6fbd28ac..d21f3b4176d3 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1502,7 +1502,7 @@ static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, return -EINVAL; } - if (project_id > ARRAY_SIZE(project_id_to_lmp_subver)) { + if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) { BT_ERR("%s: unknown project id %d", hdev->name, project_id); return -EINVAL; } From 771aada9ace7e5dd837a69ef0bca08b5455b2d36 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 27 Apr 2015 11:12:25 +0200 Subject: [PATCH 128/652] s390/bpf: Adjust ALU64_DIV/MOD to match interpreter change The s390x ALU64_DIV/MOD has been implemented according to the eBPF interpreter specification that used do_div(). This function does a 64-bit by 32-bit divide. It turned out that this was wrong and now the interpreter uses div64_u64_rem() for full 64-bit division. So fix this and use full 64-bit division in the s390x eBPF backend code. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit_comp.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 7690dc8e1ab5..065aca02bc65 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -588,8 +588,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4(0xb9160000, dst_reg, rc_reg); break; } - case BPF_ALU64 | BPF_DIV | BPF_X: /* dst = dst / (u32) src */ - case BPF_ALU64 | BPF_MOD | BPF_X: /* dst = dst % (u32) src */ + case BPF_ALU64 | BPF_DIV | BPF_X: /* dst = dst / src */ + case BPF_ALU64 | BPF_MOD | BPF_X: /* dst = dst % src */ { int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; @@ -602,10 +602,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4_IMM(0xa7090000, REG_W0, 0); /* lgr %w1,%dst */ EMIT4(0xb9040000, REG_W1, dst_reg); - /* llgfr %dst,%src (u32 cast) */ - EMIT4(0xb9160000, dst_reg, src_reg); /* dlgr %w0,%dst */ - EMIT4(0xb9870000, REG_W0, dst_reg); + EMIT4(0xb9870000, REG_W0, src_reg); /* lgr %dst,%rc */ EMIT4(0xb9040000, dst_reg, rc_reg); break; @@ -632,8 +630,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4(0xb9160000, dst_reg, rc_reg); break; } - case BPF_ALU64 | BPF_DIV | BPF_K: /* dst = dst / (u32) imm */ - case BPF_ALU64 | BPF_MOD | BPF_K: /* dst = dst % (u32) imm */ + case BPF_ALU64 | BPF_DIV | BPF_K: /* dst = dst / imm */ + case BPF_ALU64 | BPF_MOD | BPF_K: /* dst = dst % imm */ { int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; @@ -649,7 +647,7 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4(0xb9040000, REG_W1, dst_reg); /* dlg %w0,(%l) */ EMIT6_DISP_LH(0xe3000000, 0x0087, REG_W0, REG_0, REG_L, - EMIT_CONST_U64((u32) imm)); + EMIT_CONST_U64(imm)); /* lgr %dst,%rc */ EMIT4(0xb9040000, dst_reg, rc_reg); break; From 8cc2af7c530e320db442e6efec8c84c125c07c81 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Tue, 28 Apr 2015 10:31:44 +0200 Subject: [PATCH 129/652] s390/zcrypt: fixed ap poll timer behavior The ap poll timer restart condition was wrong. Hence the poll timer was not restarted reliable when setting a new time interval via the poll_timeout sysfs attribute. Added missing timer locking. Reported-by: Thomas Gleixner Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index f0b9871a4bbd..6e506a88f43e 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1158,11 +1158,12 @@ static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf, poll_timeout = time; hr_time = ktime_set(0, poll_timeout); - if (!hrtimer_is_queued(&ap_poll_timer) || - !hrtimer_forward(&ap_poll_timer, hrtimer_get_expires(&ap_poll_timer), hr_time)) { - hrtimer_set_expires(&ap_poll_timer, hr_time); - hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS); - } + spin_lock_bh(&ap_poll_timer_lock); + hrtimer_cancel(&ap_poll_timer); + hrtimer_set_expires(&ap_poll_timer, hr_time); + hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS); + spin_unlock_bh(&ap_poll_timer_lock); + return count; } @@ -1528,14 +1529,11 @@ static inline void __ap_schedule_poll_timer(void) ktime_t hr_time; spin_lock_bh(&ap_poll_timer_lock); - if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag) - goto out; - if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) { + if (!hrtimer_is_queued(&ap_poll_timer) && !ap_suspend_flag) { hr_time = ktime_set(0, poll_timeout); hrtimer_forward_now(&ap_poll_timer, hr_time); hrtimer_restart(&ap_poll_timer); } -out: spin_unlock_bh(&ap_poll_timer_lock); } From b9b4b1cef156e6b403b26ea4cb6d0caf4850e05c Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 29 Apr 2015 18:45:03 +0200 Subject: [PATCH 130/652] s390/bpf: Fix gcov stack space problem When compiling the kernel for GCOV (CONFIG_GCOV_KERNEL,-fprofile-arcs), gcc allocates a lot of stack space because of the large switch statement in bpf_jit_insn(). This leads to the following compile warning: arch/s390/net/bpf_jit_comp.c: In function 'bpf_jit_prog': arch/s390/net/bpf_jit_comp.c:1144:1: warning: frame size of function 'bpf_jit_prog' is 12592 bytes which is more than half the stack size. The dynamic check would not be reliable. No check emitted for this function. arch/s390/net/bpf_jit_comp.c:1144:1: warning: the frame size of 12504 bytes is larger than 1024 bytes [-Wframe-larger-than=] And indead gcc allocates 12592 bytes of stack space: # objdump -d arch/s390/net/bpf_jit_comp.o ... 0000000000000c60 : c60: eb 6f f0 48 00 24 stmg %r6,%r15,72(%r15) c66: b9 04 00 ef lgr %r14,%r15 c6a: e3 f0 fe d0 fc 71 lay %r15,-12592(%r15) As a workaround of that problem we now define bpf_jit_insn() as noinline which then reduces the stack space. # objdump -d arch/s390/net/bpf_jit_comp.o ... 0000000000000070 : 70: eb 6f f0 48 00 24 stmg %r6,%r15,72(%r15) 76: c0 d0 00 00 00 00 larl %r13,76 7c: a7 f1 3f 80 tmll %r15,16256 80: b9 04 00 ef lgr %r14,%r15 84: e3 f0 ff a0 ff 71 lay %r15,-96(%r15) Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit_comp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 065aca02bc65..20c146d1251a 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -443,8 +443,11 @@ static void bpf_jit_epilogue(struct bpf_jit *jit) /* * Compile one eBPF instruction into s390x code + * + * NOTE: Use noinline because for gcov (-fprofile-arcs) gcc allocates a lot of + * stack space for the large switch statement. */ -static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) +static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) { struct bpf_insn *insn = &fp->insnsi[i]; int jmp_off, last, insn_count = 1; From 409e718e09885de78cebcb57f0f908eaed5304df Mon Sep 17 00:00:00 2001 From: Ramakrishna Pallala Date: Fri, 13 Mar 2015 21:49:09 +0530 Subject: [PATCH 131/652] axp288_fuel_gauge: Add original author details Add the original author details of the axp288_fuel_gauge driver. Signed-off-by: Ramakrishna Pallala Acked-by: Todd Brandt Signed-off-by: Sebastian Reichel --- drivers/power/axp288_fuel_gauge.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/axp288_fuel_gauge.c b/drivers/power/axp288_fuel_gauge.c index ca1cc5a47eb1..bd1dbfee2515 100644 --- a/drivers/power/axp288_fuel_gauge.c +++ b/drivers/power/axp288_fuel_gauge.c @@ -1149,6 +1149,7 @@ static struct platform_driver axp288_fuel_gauge_driver = { module_platform_driver(axp288_fuel_gauge_driver); +MODULE_AUTHOR("Ramakrishna Pallala "); MODULE_AUTHOR("Todd Brandt "); MODULE_DESCRIPTION("Xpower AXP288 Fuel Gauge Driver"); MODULE_LICENSE("GPL"); From 2a6afddb6656aefbc6e8d6ef1f95749895ae2945 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Sun, 29 Mar 2015 15:35:54 +0200 Subject: [PATCH 132/652] MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I'm author of two of those drivers (bq2415x and rx51) and I added more patches for other twos. Also I fished (proper) open source power management software for Nokia N900 and those kernel drivers are part of it. Signed-off-by: Pali Rohár Signed-off-by: Sebastian Reichel --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0d68b2..e9919782444b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6943,6 +6943,17 @@ T: git git://git.rocketboards.org/linux-socfpga-next.git S: Maintained F: arch/nios2/ +NOKIA N900 POWER SUPPLY DRIVERS +M: Pali Rohár +S: Maintained +F: include/linux/power/bq2415x_charger.h +F: include/linux/power/bq27x00_battery.h +F: include/linux/power/isp1704_charger.h +F: drivers/power/bq2415x_charger.c +F: drivers/power/bq27x00_battery.c +F: drivers/power/isp1704_charger.c +F: drivers/power/rx51_battery.c + NTB DRIVER M: Jon Mason M: Dave Jiang From 932df43005389300a3336421e4aedb25390ae144 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 Apr 2015 20:19:43 +0800 Subject: [PATCH 133/652] power/reset: at91: fix return value check in at91_reset_platform_probe() In case of error, the function devm_ioremap() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ecfe64d8c55f ("power: reset: Add AT91 reset driver") Signed-off-by: Wei Yongjun Signed-off-by: Sebastian Reichel --- drivers/power/reset/at91-reset.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c index 01c7055c4200..ca461ebc7ae8 100644 --- a/drivers/power/reset/at91-reset.c +++ b/drivers/power/reset/at91-reset.c @@ -212,9 +212,9 @@ static int at91_reset_platform_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, idx + 1 ); at91_ramc_base[idx] = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (IS_ERR(at91_ramc_base[idx])) { + if (!at91_ramc_base[idx]) { dev_err(&pdev->dev, "Could not map ram controller address\n"); - return PTR_ERR(at91_ramc_base[idx]); + return -ENOMEM; } } From ce992369cf29a8762b46338756ef5aba35774981 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 27 Apr 2015 20:15:43 +0300 Subject: [PATCH 134/652] power_supply: fix oops in collie_battery driver Fix an oops happening due to typo in 297d716f6260cc9421d971b124ca196b957ee [power_supply: Change ownership from driver to core]. Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0004000 [00000050] *pgd=00000000 Internal error: Oops: 17 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-rc1+ #35 Hardware name: Sharp-Collie task: c381a720 ti: c381e000 task.ti: c381e000 PC is at collie_bat_get_property+0x10/0x258 LR is at collie_bat_get_property+0x10/0x258 pc : [] lr : [] psr: 20000013 sp : c381fd60 ip : 00000001 fp : 00000000 r10: c37b84c0 r9 : c068c9b8 r8 : c37b84a0 r7 : c37b84c0 r6 : c381fd84 r5 : 00000000 r4 : 00000000 r3 : c0369380 r2 : c381fd84 r1 : 00000000 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0000717f Table: c3784000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc381e190) Stack: (0xc381fd60 to 0xc3820000) fd60: c0369380 00000000 c37c0000 c068c9b8 c37b84c0 c0234380 00000000 c0234bc0 fd80: c042fcec c37b84a0 c0357c64 00000000 c37b84c0 c37c0000 c37b84a0 c0234e98 fda0: c37be020 00000000 ff0a0004 c37b84c8 c37be020 c37b84c0 c042fcec c383dbc0 fdc0: c0364060 00000000 00000000 c01be6a8 00000000 c015b220 c37b84c8 c381fdf0 fde0: c37b84c8 c37b84c8 c37b84c8 c37be020 c041e278 c015b478 c04a45b4 c0045290 fe00: c381a720 c0345d50 00000001 c37bf020 c0e511d8 c00453c0 c0688058 c37b84c8 fe20: 00000000 c37b84c0 c37780c0 c0e511d8 c38e2f60 c0e52d24 c04a45b4 c01be134 fe40: c37b8550 c37b8550 00000000 c0347a8c c37b84a0 00000000 c37b84c0 c0369380 fe60: c37780c0 00000001 00000061 c02347a0 00000001 c0e52e6c c068d144 c37b77a0 fe80: 00000000 c068d164 00000000 c0235b3c 00000000 c067fbb4 00000000 c068d1e4 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 c37b77a0 c068d144 fec0: c3778020 c06953c0 c049de68 c01d5f54 c0688800 c3778020 c068d144 c0688700 fee0: c06953c0 c01d6000 c0675b80 c0675b80 c37b77a0 c0009624 c381a720 c000d8dc ff00: 00000001 c381ff54 c048a500 c00453c0 c00095a0 20000153 ffffffff c000d8dc ff20: c049cbd0 00000001 c04aa064 00000007 c04a9fb0 00000006 c06953c0 c06953c0 ff40: c048a590 c04a45c0 c04a9ffc 00000006 c06953c0 c06953c0 c048a590 c04a45c0 ff60: 00000061 c048adf8 00000006 00000006 c048a590 c0036450 00000001 00000000 ff80: c00363ec 00000000 c033ee7c 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 c033ee84 00000000 c000a3c8 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [] (collie_bat_get_property) from [] (power_supply_get_property+0x1c/0x28) [] (power_supply_get_property) from [] (power_supply_show_property+0x50/0x1dc) [] (power_supply_show_property) from [] (power_supply_uevent+0x9c/0x1cc) [] (power_supply_uevent) from [] (dev_uevent+0xb4/0x1d0) [] (dev_uevent) from [] (kobject_uevent_env+0x1cc/0x4f8) [] (kobject_uevent_env) from [] (device_add+0x374/0x524) [] (device_add) from [] (__power_supply_register+0x120/0x180) [] (__power_supply_register) from [] (collie_bat_probe+0xe8/0x1b4) [] (collie_bat_probe) from [] (ucb1x00_add_dev+0x30/0x88) [] (ucb1x00_add_dev) from [] (ucb1x00_register_driver+0x54/0x78) [] (ucb1x00_register_driver) from [] (do_one_initcall+0x84/0x1f4) [] (do_one_initcall) from [] (kernel_init_freeable+0xf8/0x1b4) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xec) [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) Code: e92d40f8 e1a05001 e1a06002 ebfff9bc (e5903050) ---[ end trace 447ee06b251d66b2 ]--- Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Sebastian Reichel --- drivers/power/collie_battery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c index 2da9ed8ccbb5..8a971b3dbe58 100644 --- a/drivers/power/collie_battery.c +++ b/drivers/power/collie_battery.c @@ -347,7 +347,7 @@ static int collie_bat_probe(struct ucb1x00_dev *dev) goto err_psy_reg_main; } - psy_main_cfg.drv_data = &collie_bat_bu; + psy_bu_cfg.drv_data = &collie_bat_bu; collie_bat_bu.psy = power_supply_register(&dev->ucb->dev, &collie_bat_bu_desc, &psy_bu_cfg); From d8818257d3befce6ce7da4c09112654914c3fd58 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 14 Apr 2015 21:09:20 +0000 Subject: [PATCH 135/652] power: reset: ltc2952: Remove bogus hrtimer_start() return value checks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The return value of hrtimer_start() tells whether the timer was inactive or active already when hrtimer_start() was called. The code emits a bogus warning if the timer was active already claiming that the timer could not be started. Remove it. Signed-off-by: Thomas Gleixner Cc: Sebastian Reichel Cc: Dmitry Eremin-Solenikov Cc: David Woodhouse Cc: Frans Klaver Cc: "René Moll" Cc: Wolfram Sang Cc: linux-pm@vger.kernel.org Acked-by: Frans Klaver Signed-off-by: Sebastian Reichel --- drivers/power/reset/ltc2952-poweroff.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) diff --git a/drivers/power/reset/ltc2952-poweroff.c b/drivers/power/reset/ltc2952-poweroff.c index 7ef193b6f7fe..1e08195551fe 100644 --- a/drivers/power/reset/ltc2952-poweroff.c +++ b/drivers/power/reset/ltc2952-poweroff.c @@ -120,18 +120,7 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer) static void ltc2952_poweroff_start_wde(struct ltc2952_poweroff *data) { - if (hrtimer_start(&data->timer_wde, data->wde_interval, - HRTIMER_MODE_REL)) { - /* - * The device will not toggle the watchdog reset, - * thus shut down is only safe if the PowerPath controller - * has a long enough time-off before triggering a hardware - * power-off. - * - * Only sending a warning as the system will power-off anyway - */ - dev_err(data->dev, "unable to start the timer\n"); - } + hrtimer_start(&data->timer_wde, data->wde_interval, HRTIMER_MODE_REL); } static enum hrtimer_restart @@ -165,9 +154,8 @@ static irqreturn_t ltc2952_poweroff_handler(int irq, void *dev_id) } if (gpiod_get_value(data->gpio_trigger)) { - if (hrtimer_start(&data->timer_trigger, data->trigger_delay, - HRTIMER_MODE_REL)) - dev_err(data->dev, "unable to start the wait timer\n"); + hrtimer_start(&data->timer_trigger, data->trigger_delay, + HRTIMER_MODE_REL); } else { hrtimer_cancel(&data->timer_trigger); /* omitting return value check, timer should have been valid */ From d24d81444f8caf1895256ef2d2e89ae8202a17e4 Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sun, 26 Apr 2015 20:51:50 +0200 Subject: [PATCH 136/652] Bluetooth: Skip the shutdown routine if the interface is not up Most likely, the shutdown routine requires the interface to be up. This is the case for BTUSB_INTEL: the routine tries to send a command to the interface, but since this one is down, it fails and exits once HCI_INIT_TIMEOUT has expired. Signed-off-by: Gabriele Mazzotta Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org # 4.0.x --- net/bluetooth/hci_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 476709bd068a..4663c3dad3f5 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1557,7 +1557,8 @@ static int hci_dev_do_close(struct hci_dev *hdev) { BT_DBG("%s %p", hdev->name, hdev); - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER)) { + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && + test_bit(HCI_UP, &hdev->flags)) { /* Execute vendor specific shutdown routine */ if (hdev->shutdown) hdev->shutdown(hdev); From 2b4d413c3871af0f2ccd466fb6581ed2c2d89438 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:53 +0200 Subject: [PATCH 137/652] mac802154: fix ieee802154_register_hw error handling Currently if ieee802154_if_add failed, we don't unregister the wpan phy which was registered before. This patch adds a correct error handling for unregister the wpan phy when ieee802154_if_add failed. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- net/mac802154/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/mac802154/main.c b/net/mac802154/main.c index 8500378c8318..beece7b7a776 100644 --- a/net/mac802154/main.c +++ b/net/mac802154/main.c @@ -166,13 +166,15 @@ int ieee802154_register_hw(struct ieee802154_hw *hw) if (IS_ERR(dev)) { rtnl_unlock(); rc = PTR_ERR(dev); - goto out_wq; + goto out_phy; } rtnl_unlock(); return 0; +out_phy: + wpan_phy_unregister(local->phy); out_wq: destroy_workqueue(local->workqueue); out: From 89eb6d0677a6daf134015bc7bd5ec1432911eed2 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 30 Apr 2015 17:44:54 +0200 Subject: [PATCH 138/652] mac802154: llsec: fix return value check in llsec_key_alloc() In case of error, the functions crypto_alloc_aead() and crypto_alloc_blkcipher() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- net/mac802154/llsec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac802154/llsec.c b/net/mac802154/llsec.c index dcf73958133a..5b2be12832e6 100644 --- a/net/mac802154/llsec.c +++ b/net/mac802154/llsec.c @@ -134,7 +134,7 @@ llsec_key_alloc(const struct ieee802154_llsec_key *template) for (i = 0; i < ARRAY_SIZE(key->tfm); i++) { key->tfm[i] = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC); - if (!key->tfm[i]) + if (IS_ERR(key->tfm[i])) goto err_tfm; if (crypto_aead_setkey(key->tfm[i], template->key, IEEE802154_LLSEC_KEY_SIZE)) @@ -144,7 +144,7 @@ llsec_key_alloc(const struct ieee802154_llsec_key *template) } key->tfm0 = crypto_alloc_blkcipher("ctr(aes)", 0, CRYPTO_ALG_ASYNC); - if (!key->tfm0) + if (IS_ERR(key->tfm0)) goto err_tfm; if (crypto_blkcipher_setkey(key->tfm0, template->key, From 42fb23e2f57accbed69804e6d72ea3a88b8a84c4 Mon Sep 17 00:00:00 2001 From: Varka Bhadram Date: Thu, 30 Apr 2015 17:44:52 +0200 Subject: [PATCH 139/652] mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram Acked-by: Alexander Aring Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- include/net/mac802154.h | 94 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 92 insertions(+), 2 deletions(-) diff --git a/include/net/mac802154.h b/include/net/mac802154.h index e18e7fd43f47..7df28a4c23f9 100644 --- a/include/net/mac802154.h +++ b/include/net/mac802154.h @@ -247,19 +247,109 @@ static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src) __put_unaligned_memmove64(swab64p(le64_src), be64_dst); } -/* Basic interface to register ieee802154 device */ +/** + * ieee802154_alloc_hw - Allocate a new hardware device + * + * This must be called once for each hardware device. The returned pointer + * must be used to refer to this device when calling other functions. + * mac802154 allocates a private data area for the driver pointed to by + * @priv in &struct ieee802154_hw, the size of this area is given as + * @priv_data_len. + * + * @priv_data_len: length of private data + * @ops: callbacks for this device + * + * Return: A pointer to the new hardware device, or %NULL on error. + */ struct ieee802154_hw * ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops); + +/** + * ieee802154_free_hw - free hardware descriptor + * + * This function frees everything that was allocated, including the + * private data for the driver. You must call ieee802154_unregister_hw() + * before calling this function. + * + * @hw: the hardware to free + */ void ieee802154_free_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_register_hw - Register hardware device + * + * You must call this function before any other functions in + * mac802154. Note that before a hardware can be registered, you + * need to fill the contained wpan_phy's information. + * + * @hw: the device to register as returned by ieee802154_alloc_hw() + * + * Return: 0 on success. An error code otherwise. + */ int ieee802154_register_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_unregister_hw - Unregister a hardware device + * + * This function instructs mac802154 to free allocated resources + * and unregister netdevices from the networking subsystem. + * + * @hw: the hardware to unregister + */ void ieee802154_unregister_hw(struct ieee802154_hw *hw); +/** + * ieee802154_rx - receive frame + * + * Use this function to hand received frames to mac802154. The receive + * buffer in @skb must start with an IEEE 802.15.4 header. In case of a + * paged @skb is used, the driver is recommended to put the ieee802154 + * header of the frame on the linear part of the @skb to avoid memory + * allocation and/or memcpy by the stack. + * + * This function may not be called in IRQ context. Calls to this function + * for a single hardware must be synchronized against each other. + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac802154 after this call + */ void ieee802154_rx(struct ieee802154_hw *hw, struct sk_buff *skb); + +/** + * ieee802154_rx_irqsafe - receive frame + * + * Like ieee802154_rx() but can be called in IRQ context + * (internally defers to a tasklet.) + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac802154 after this call + * @lqi: link quality indicator + */ void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, u8 lqi); - +/** + * ieee802154_wake_queue - wake ieee802154 queue + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * + * Drivers should use this function instead of netif_wake_queue. + */ void ieee802154_wake_queue(struct ieee802154_hw *hw); + +/** + * ieee802154_stop_queue - stop ieee802154 queue + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * + * Drivers should use this function instead of netif_stop_queue. + */ void ieee802154_stop_queue(struct ieee802154_hw *hw); + +/** + * ieee802154_xmit_complete - frame transmission complete + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + * @ifs_handling: indicate interframe space handling + */ void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, bool ifs_handling); From 1cc800e7aabb40e2d8ffc3d259e6a153007fa9eb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Guido=20G=C3=BCnther?= Date: Thu, 30 Apr 2015 17:44:55 +0200 Subject: [PATCH 140/652] ieee802154: Add trace events for rdev->ops MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enabling tracing via echo 1 > /sys/kernel/debug/tracing/events/cfg802154/enable enables event tracing like iwpan dev wpan0 set pan_id 0xbeef cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:1 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | iwpan-2663 [000] .... 170.369142: 802154_rdev_set_pan_id: phy0, wpan_dev(1), pan id: 0xbeef iwpan-2663 [000] .... 170.369177: 802154_rdev_return_int: phy0, returned: 0 Signed-off-by: Guido Günther Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- net/ieee802154/Makefile | 4 +- net/ieee802154/rdev-ops.h | 77 ++++++++++-- net/ieee802154/trace.c | 7 ++ net/ieee802154/trace.h | 246 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 322 insertions(+), 12 deletions(-) create mode 100644 net/ieee802154/trace.c create mode 100644 net/ieee802154/trace.h diff --git a/net/ieee802154/Makefile b/net/ieee802154/Makefile index 05dab2957cd4..4adfd4d5471b 100644 --- a/net/ieee802154/Makefile +++ b/net/ieee802154/Makefile @@ -3,7 +3,9 @@ obj-$(CONFIG_IEEE802154_SOCKET) += ieee802154_socket.o obj-y += 6lowpan/ ieee802154-y := netlink.o nl-mac.o nl-phy.o nl_policy.o core.o \ - header_ops.o sysfs.o nl802154.o + header_ops.o sysfs.o nl802154.o trace.o ieee802154_socket-y := socket.o +CFLAGS_trace.o := -I$(src) + ccflags-y += -D__CHECK_ENDIAN__ diff --git a/net/ieee802154/rdev-ops.h b/net/ieee802154/rdev-ops.h index 7c46732fad2b..624413ee095f 100644 --- a/net/ieee802154/rdev-ops.h +++ b/net/ieee802154/rdev-ops.h @@ -4,6 +4,7 @@ #include #include "core.h" +#include "trace.h" static inline struct net_device * rdev_add_virtual_intf_deprecated(struct cfg802154_registered_device *rdev, @@ -24,73 +25,127 @@ static inline int rdev_add_virtual_intf(struct cfg802154_registered_device *rdev, char *name, enum nl802154_iftype type, __le64 extended_addr) { - return rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, type, + int ret; + + trace_802154_rdev_add_virtual_intf(&rdev->wpan_phy, name, type, extended_addr); + ret = rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, type, + extended_addr); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_del_virtual_intf(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev) { - return rdev->ops->del_virtual_intf(&rdev->wpan_phy, wpan_dev); + int ret; + + trace_802154_rdev_del_virtual_intf(&rdev->wpan_phy, wpan_dev); + ret = rdev->ops->del_virtual_intf(&rdev->wpan_phy, wpan_dev); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_channel(struct cfg802154_registered_device *rdev, u8 page, u8 channel) { - return rdev->ops->set_channel(&rdev->wpan_phy, page, channel); + int ret; + + trace_802154_rdev_set_channel(&rdev->wpan_phy, page, channel); + ret = rdev->ops->set_channel(&rdev->wpan_phy, page, channel); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_cca_mode(struct cfg802154_registered_device *rdev, const struct wpan_phy_cca *cca) { - return rdev->ops->set_cca_mode(&rdev->wpan_phy, cca); + int ret; + + trace_802154_rdev_set_cca_mode(&rdev->wpan_phy, cca); + ret = rdev->ops->set_cca_mode(&rdev->wpan_phy, cca); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_pan_id(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, __le16 pan_id) { - return rdev->ops->set_pan_id(&rdev->wpan_phy, wpan_dev, pan_id); + int ret; + + trace_802154_rdev_set_pan_id(&rdev->wpan_phy, wpan_dev, pan_id); + ret = rdev->ops->set_pan_id(&rdev->wpan_phy, wpan_dev, pan_id); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_short_addr(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, __le16 short_addr) { - return rdev->ops->set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr); + int ret; + + trace_802154_rdev_set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr); + ret = rdev->ops->set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_backoff_exponent(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, u8 min_be, u8 max_be) { - return rdev->ops->set_backoff_exponent(&rdev->wpan_phy, wpan_dev, + int ret; + + trace_802154_rdev_set_backoff_exponent(&rdev->wpan_phy, wpan_dev, min_be, max_be); + ret = rdev->ops->set_backoff_exponent(&rdev->wpan_phy, wpan_dev, + min_be, max_be); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_max_csma_backoffs(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, u8 max_csma_backoffs) { - return rdev->ops->set_max_csma_backoffs(&rdev->wpan_phy, wpan_dev, - max_csma_backoffs); + int ret; + + trace_802154_rdev_set_csma_backoffs(&rdev->wpan_phy, wpan_dev, + max_csma_backoffs); + ret = rdev->ops->set_max_csma_backoffs(&rdev->wpan_phy, wpan_dev, + max_csma_backoffs); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_max_frame_retries(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, s8 max_frame_retries) { - return rdev->ops->set_max_frame_retries(&rdev->wpan_phy, wpan_dev, + int ret; + + trace_802154_rdev_set_max_frame_retries(&rdev->wpan_phy, wpan_dev, max_frame_retries); + ret = rdev->ops->set_max_frame_retries(&rdev->wpan_phy, wpan_dev, + max_frame_retries); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_lbt_mode(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, bool mode) { - return rdev->ops->set_lbt_mode(&rdev->wpan_phy, wpan_dev, mode); + int ret; + + trace_802154_rdev_set_lbt_mode(&rdev->wpan_phy, wpan_dev, mode); + ret = rdev->ops->set_lbt_mode(&rdev->wpan_phy, wpan_dev, mode); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } #endif /* __CFG802154_RDEV_OPS */ diff --git a/net/ieee802154/trace.c b/net/ieee802154/trace.c new file mode 100644 index 000000000000..95f997fad755 --- /dev/null +++ b/net/ieee802154/trace.c @@ -0,0 +1,7 @@ +#include + +#ifndef __CHECKER__ +#define CREATE_TRACE_POINTS +#include "trace.h" + +#endif diff --git a/net/ieee802154/trace.h b/net/ieee802154/trace.h new file mode 100644 index 000000000000..8ed9f975de01 --- /dev/null +++ b/net/ieee802154/trace.h @@ -0,0 +1,246 @@ +/* Based on net/wireless/tracing.h */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM cfg802154 + +#if !defined(__RDEV_CFG802154_OPS_TRACE) || defined(TRACE_HEADER_MULTI_READ) +#define __RDEV_CFG802154_OPS_TRACE + +#include + +#include + +#define MAXNAME 32 +#define WPAN_PHY_ENTRY __array(char, wpan_phy_name, MAXNAME) +#define WPAN_PHY_ASSIGN strlcpy(__entry->wpan_phy_name, \ + wpan_phy_name(wpan_phy), \ + MAXNAME) +#define WPAN_PHY_PR_FMT "%s" +#define WPAN_PHY_PR_ARG __entry->wpan_phy_name + +#define WPAN_DEV_ENTRY __field(u32, identifier) +#define WPAN_DEV_ASSIGN (__entry->identifier) = (!IS_ERR_OR_NULL(wpan_dev) \ + ? wpan_dev->identifier : 0) +#define WPAN_DEV_PR_FMT "wpan_dev(%u)" +#define WPAN_DEV_PR_ARG (__entry->identifier) + +#define WPAN_CCA_ENTRY __field(enum nl802154_cca_modes, cca_mode) \ + __field(enum nl802154_cca_opts, cca_opt) +#define WPAN_CCA_ASSIGN \ + do { \ + (__entry->cca_mode) = cca->mode; \ + (__entry->cca_opt) = cca->opt; \ + } while (0) +#define WPAN_CCA_PR_FMT "cca_mode: %d, cca_opt: %d" +#define WPAN_CCA_PR_ARG __entry->cca_mode, __entry->cca_opt + +#define BOOL_TO_STR(bo) (bo) ? "true" : "false" + +/************************************************************* + * rdev->ops traces * + *************************************************************/ + +TRACE_EVENT(802154_rdev_add_virtual_intf, + TP_PROTO(struct wpan_phy *wpan_phy, char *name, + enum nl802154_iftype type, __le64 extended_addr), + TP_ARGS(wpan_phy, name, type, extended_addr), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + __string(vir_intf_name, name ? name : "") + __field(enum nl802154_iftype, type) + __field(__le64, extended_addr) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + __assign_str(vir_intf_name, name ? name : ""); + __entry->type = type; + __entry->extended_addr = extended_addr; + ), + TP_printk(WPAN_PHY_PR_FMT ", virtual intf name: %s, type: %d, ea %llx", + WPAN_PHY_PR_ARG, __get_str(vir_intf_name), __entry->type, + __entry->extended_addr) +); + +TRACE_EVENT(802154_rdev_del_virtual_intf, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev), + TP_ARGS(wpan_phy, wpan_dev), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT, WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG) +); + +TRACE_EVENT(802154_rdev_set_channel, + TP_PROTO(struct wpan_phy *wpan_phy, u8 page, u8 channel), + TP_ARGS(wpan_phy, page, channel), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + __field(u8, page) + __field(u8, channel) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + __entry->page = page; + __entry->channel = channel; + ), + TP_printk(WPAN_PHY_PR_FMT ", page: %d, channel: %d", WPAN_PHY_PR_ARG, + __entry->page, __entry->channel) +); + +TRACE_EVENT(802154_rdev_set_cca_mode, + TP_PROTO(struct wpan_phy *wpan_phy, const struct wpan_phy_cca *cca), + TP_ARGS(wpan_phy, cca), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_CCA_ENTRY + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_CCA_ASSIGN; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_CCA_PR_FMT, WPAN_PHY_PR_ARG, + WPAN_CCA_PR_ARG) +); + +DECLARE_EVENT_CLASS(802154_le16_template, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + __le16 le16arg), + TP_ARGS(wpan_phy, wpan_dev, le16arg), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(__le16, le16arg) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->le16arg = le16arg; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT ", pan id: 0x%04x", + WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, + __le16_to_cpu(__entry->le16arg)) +); + +DEFINE_EVENT(802154_le16_template, 802154_rdev_set_pan_id, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + __le16 le16arg), + TP_ARGS(wpan_phy, wpan_dev, le16arg) +); + +DEFINE_EVENT_PRINT(802154_le16_template, 802154_rdev_set_short_addr, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + __le16 le16arg), + TP_ARGS(wpan_phy, wpan_dev, le16arg), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT ", sa: 0x%04x", + WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, __entry->le16arg) +); + +TRACE_EVENT(802154_rdev_set_backoff_exponent, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + u8 min_be, u8 max_be), + TP_ARGS(wpan_phy, wpan_dev, min_be, max_be), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(u8, min_be) + __field(u8, max_be) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->min_be = min_be; + __entry->max_be = max_be; + ), + + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", min be: %d, max_be: %d", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, __entry->min_be, __entry->max_be) +); + +TRACE_EVENT(802154_rdev_set_csma_backoffs, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + u8 max_csma_backoffs), + TP_ARGS(wpan_phy, wpan_dev, max_csma_backoffs), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(u8, max_csma_backoffs) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->max_csma_backoffs = max_csma_backoffs; + ), + + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", max csma backoffs: %d", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, __entry->max_csma_backoffs) +); + +TRACE_EVENT(802154_rdev_set_max_frame_retries, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + s8 max_frame_retries), + TP_ARGS(wpan_phy, wpan_dev, max_frame_retries), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(s8, max_frame_retries) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->max_frame_retries = max_frame_retries; + ), + + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", max frame retries: %d", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, __entry->max_frame_retries) +); + +TRACE_EVENT(802154_rdev_set_lbt_mode, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + bool mode), + TP_ARGS(wpan_phy, wpan_dev, mode), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(bool, mode) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->mode = mode; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", lbt mode: %s", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, BOOL_TO_STR(__entry->mode)) +); + +TRACE_EVENT(802154_rdev_return_int, + TP_PROTO(struct wpan_phy *wpan_phy, int ret), + TP_ARGS(wpan_phy, ret), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + __field(int, ret) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + __entry->ret = ret; + ), + TP_printk(WPAN_PHY_PR_FMT ", returned: %d", WPAN_PHY_PR_ARG, + __entry->ret) +); + +#endif /* !__RDEV_CFG802154_OPS_TRACE || TRACE_HEADER_MULTI_READ */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace +#include From 4748e86ecf262ae9d94b7e4073653554951ceb7a Mon Sep 17 00:00:00 2001 From: Christoffer Holmstedt Date: Thu, 30 Apr 2015 17:44:56 +0200 Subject: [PATCH 141/652] at86rf230: Add macro for TRX STATE MASK Instead of using the 'magic' number of 0x1f the TRX_STATE_MASK macro is introduced. Signed-off-by: Christoffer Holmstedt Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 38026650c038..684488acc65d 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -292,6 +292,8 @@ struct at86rf230_local { #define STATE_BUSY_RX_AACK_NOCLK 0x1E #define STATE_TRANSITION_IN_PROGRESS 0x1F +#define TRX_STATE_MASK (0x1F) + #define AT86RF2XX_NUMREGS 0x3F static void @@ -509,7 +511,7 @@ at86rf230_async_state_assert(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; const u8 *buf = ctx->buf; - const u8 trx_state = buf[1] & 0x1f; + const u8 trx_state = buf[1] & TRX_STATE_MASK; /* Assert state change */ if (trx_state != ctx->to_state) { @@ -667,7 +669,7 @@ at86rf230_async_state_change_start(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; u8 *buf = ctx->buf; - const u8 trx_state = buf[1] & 0x1f; + const u8 trx_state = buf[1] & TRX_STATE_MASK; int rc; /* Check for "possible" STATE_TRANSITION_IN_PROGRESS */ From 5b4a10390460cccf17a9fac739e153d68cf25ef5 Mon Sep 17 00:00:00 2001 From: Varka Bhadram Date: Thu, 30 Apr 2015 17:44:57 +0200 Subject: [PATCH 142/652] cfg802154: pass name_assign_type to rdev_add_virtual_intf() This code is based on commit 6bab2e19c5ffd ("cfg80211: pass name_assign_type to rdev_add_virtual_intf()") This will expose in sysfs whether the ifname of a IEEE-802.15.4 device is set by userspace or generated by the kernel. We are using two types of name_assign_types o NET_NAME_ENUM: Default interface name provided by kernel o NET_NAME_USER: Interface name provided by user. Signed-off-by: Varka Bhadram Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- include/net/cfg802154.h | 2 ++ net/ieee802154/nl-phy.c | 5 ++++- net/ieee802154/nl802154.c | 2 +- net/ieee802154/rdev-ops.h | 10 +++++++--- net/mac802154/cfg.c | 9 ++++++--- net/mac802154/ieee802154_i.h | 3 ++- net/mac802154/iface.c | 5 +++-- net/mac802154/main.c | 3 ++- 8 files changed, 27 insertions(+), 12 deletions(-) diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h index eeda67652766..6ea16c84293b 100644 --- a/include/net/cfg802154.h +++ b/include/net/cfg802154.h @@ -30,11 +30,13 @@ struct wpan_phy_cca; struct cfg802154_ops { struct net_device * (*add_virtual_intf_deprecated)(struct wpan_phy *wpan_phy, const char *name, + unsigned char name_assign_type, int type); void (*del_virtual_intf_deprecated)(struct wpan_phy *wpan_phy, struct net_device *dev); int (*add_virtual_intf)(struct wpan_phy *wpan_phy, const char *name, + unsigned char name_assign_type, enum nl802154_iftype type, __le64 extended_addr); int (*del_virtual_intf)(struct wpan_phy *wpan_phy, diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c index 1b9d25f6e898..346c6665d25e 100644 --- a/net/ieee802154/nl-phy.c +++ b/net/ieee802154/nl-phy.c @@ -175,6 +175,7 @@ int ieee802154_add_iface(struct sk_buff *skb, struct genl_info *info) int rc = -ENOBUFS; struct net_device *dev; int type = __IEEE802154_DEV_INVALID; + unsigned char name_assign_type; pr_debug("%s\n", __func__); @@ -190,8 +191,10 @@ int ieee802154_add_iface(struct sk_buff *skb, struct genl_info *info) if (devname[nla_len(info->attrs[IEEE802154_ATTR_DEV_NAME]) - 1] != '\0') return -EINVAL; /* phy name should be null-terminated */ + name_assign_type = NET_NAME_USER; } else { devname = "wpan%d"; + name_assign_type = NET_NAME_ENUM; } if (strlen(devname) >= IFNAMSIZ) @@ -221,7 +224,7 @@ int ieee802154_add_iface(struct sk_buff *skb, struct genl_info *info) } dev = rdev_add_virtual_intf_deprecated(wpan_phy_to_rdev(phy), devname, - type); + name_assign_type, type); if (IS_ERR(dev)) { rc = PTR_ERR(dev); goto nla_put_failure; diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c index a4daf91b8d0a..f3c12f6a4a39 100644 --- a/net/ieee802154/nl802154.c +++ b/net/ieee802154/nl802154.c @@ -589,7 +589,7 @@ static int nl802154_new_interface(struct sk_buff *skb, struct genl_info *info) return rdev_add_virtual_intf(rdev, nla_data(info->attrs[NL802154_ATTR_IFNAME]), - type, extended_addr); + NET_NAME_USER, type, extended_addr); } static int nl802154_del_interface(struct sk_buff *skb, struct genl_info *info) diff --git a/net/ieee802154/rdev-ops.h b/net/ieee802154/rdev-ops.h index 624413ee095f..7b5a9dd94fe5 100644 --- a/net/ieee802154/rdev-ops.h +++ b/net/ieee802154/rdev-ops.h @@ -8,10 +8,12 @@ static inline struct net_device * rdev_add_virtual_intf_deprecated(struct cfg802154_registered_device *rdev, - const char *name, int type) + const char *name, + unsigned char name_assign_type, + int type) { return rdev->ops->add_virtual_intf_deprecated(&rdev->wpan_phy, name, - type); + name_assign_type, type); } static inline void @@ -23,13 +25,15 @@ rdev_del_virtual_intf_deprecated(struct cfg802154_registered_device *rdev, static inline int rdev_add_virtual_intf(struct cfg802154_registered_device *rdev, char *name, + unsigned char name_assign_type, enum nl802154_iftype type, __le64 extended_addr) { int ret; trace_802154_rdev_add_virtual_intf(&rdev->wpan_phy, name, type, extended_addr); - ret = rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, type, + ret = rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, + name_assign_type, type, extended_addr); trace_802154_rdev_return_int(&rdev->wpan_phy, ret); return ret; diff --git a/net/mac802154/cfg.c b/net/mac802154/cfg.c index 5d9f68c75e5f..70be9c799f8a 100644 --- a/net/mac802154/cfg.c +++ b/net/mac802154/cfg.c @@ -22,13 +22,14 @@ static struct net_device * ieee802154_add_iface_deprecated(struct wpan_phy *wpan_phy, - const char *name, int type) + const char *name, + unsigned char name_assign_type, int type) { struct ieee802154_local *local = wpan_phy_priv(wpan_phy); struct net_device *dev; rtnl_lock(); - dev = ieee802154_if_add(local, name, type, + dev = ieee802154_if_add(local, name, name_assign_type, type, cpu_to_le64(0x0000000000000000ULL)); rtnl_unlock(); @@ -45,12 +46,14 @@ static void ieee802154_del_iface_deprecated(struct wpan_phy *wpan_phy, static int ieee802154_add_iface(struct wpan_phy *phy, const char *name, + unsigned char name_assign_type, enum nl802154_iftype type, __le64 extended_addr) { struct ieee802154_local *local = wpan_phy_priv(phy); struct net_device *err; - err = ieee802154_if_add(local, name, type, extended_addr); + err = ieee802154_if_add(local, name, name_assign_type, type, + extended_addr); return PTR_ERR_OR_ZERO(err); } diff --git a/net/mac802154/ieee802154_i.h b/net/mac802154/ieee802154_i.h index bebd70ffc7a3..127ba18386fc 100644 --- a/net/mac802154/ieee802154_i.h +++ b/net/mac802154/ieee802154_i.h @@ -182,7 +182,8 @@ void ieee802154_iface_exit(void); void ieee802154_if_remove(struct ieee802154_sub_if_data *sdata); struct net_device * ieee802154_if_add(struct ieee802154_local *local, const char *name, - enum nl802154_iftype type, __le64 extended_addr); + unsigned char name_assign_type, enum nl802154_iftype type, + __le64 extended_addr); void ieee802154_remove_interfaces(struct ieee802154_local *local); #endif /* __IEEE802154_I_H */ diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c index 38b56f9d9386..91b75abbd1a1 100644 --- a/net/mac802154/iface.c +++ b/net/mac802154/iface.c @@ -522,7 +522,8 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata, struct net_device * ieee802154_if_add(struct ieee802154_local *local, const char *name, - enum nl802154_iftype type, __le64 extended_addr) + unsigned char name_assign_type, enum nl802154_iftype type, + __le64 extended_addr) { struct net_device *ndev = NULL; struct ieee802154_sub_if_data *sdata = NULL; @@ -531,7 +532,7 @@ ieee802154_if_add(struct ieee802154_local *local, const char *name, ASSERT_RTNL(); ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size, name, - NET_NAME_UNKNOWN, ieee802154_if_setup); + name_assign_type, ieee802154_if_setup); if (!ndev) return ERR_PTR(-ENOMEM); diff --git a/net/mac802154/main.c b/net/mac802154/main.c index 8500378c8318..68b9667323ec 100644 --- a/net/mac802154/main.c +++ b/net/mac802154/main.c @@ -161,7 +161,8 @@ int ieee802154_register_hw(struct ieee802154_hw *hw) rtnl_lock(); - dev = ieee802154_if_add(local, "wpan%d", NL802154_IFTYPE_NODE, + dev = ieee802154_if_add(local, "wpan%d", NET_NAME_ENUM, + NL802154_IFTYPE_NODE, cpu_to_le64(0x0000000000000000ULL)); if (IS_ERR(dev)) { rtnl_unlock(); From 5e8e01e262be1eeaae598be44b8e43b29aab842a Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:58 +0200 Subject: [PATCH 143/652] at86rf230: remove tabs after define This patch cleanups the at86rf230 driver to use a space instead a tab after define. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 304 ++++++++++++++--------------- 1 file changed, 152 insertions(+), 152 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 684488acc65d..9a41deb1966c 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -100,158 +100,158 @@ struct at86rf230_local { struct at86rf230_state_change tx; }; -#define RG_TRX_STATUS (0x01) -#define SR_TRX_STATUS 0x01, 0x1f, 0 -#define SR_RESERVED_01_3 0x01, 0x20, 5 -#define SR_CCA_STATUS 0x01, 0x40, 6 -#define SR_CCA_DONE 0x01, 0x80, 7 -#define RG_TRX_STATE (0x02) -#define SR_TRX_CMD 0x02, 0x1f, 0 -#define SR_TRAC_STATUS 0x02, 0xe0, 5 -#define RG_TRX_CTRL_0 (0x03) -#define SR_CLKM_CTRL 0x03, 0x07, 0 -#define SR_CLKM_SHA_SEL 0x03, 0x08, 3 -#define SR_PAD_IO_CLKM 0x03, 0x30, 4 -#define SR_PAD_IO 0x03, 0xc0, 6 -#define RG_TRX_CTRL_1 (0x04) -#define SR_IRQ_POLARITY 0x04, 0x01, 0 -#define SR_IRQ_MASK_MODE 0x04, 0x02, 1 -#define SR_SPI_CMD_MODE 0x04, 0x0c, 2 -#define SR_RX_BL_CTRL 0x04, 0x10, 4 -#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5 -#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 -#define SR_PA_EXT_EN 0x04, 0x80, 7 -#define RG_PHY_TX_PWR (0x05) -#define SR_TX_PWR 0x05, 0x0f, 0 -#define SR_PA_LT 0x05, 0x30, 4 -#define SR_PA_BUF_LT 0x05, 0xc0, 6 -#define RG_PHY_RSSI (0x06) -#define SR_RSSI 0x06, 0x1f, 0 -#define SR_RND_VALUE 0x06, 0x60, 5 -#define SR_RX_CRC_VALID 0x06, 0x80, 7 -#define RG_PHY_ED_LEVEL (0x07) -#define SR_ED_LEVEL 0x07, 0xff, 0 -#define RG_PHY_CC_CCA (0x08) -#define SR_CHANNEL 0x08, 0x1f, 0 -#define SR_CCA_MODE 0x08, 0x60, 5 -#define SR_CCA_REQUEST 0x08, 0x80, 7 -#define RG_CCA_THRES (0x09) -#define SR_CCA_ED_THRES 0x09, 0x0f, 0 -#define SR_RESERVED_09_1 0x09, 0xf0, 4 -#define RG_RX_CTRL (0x0a) -#define SR_PDT_THRES 0x0a, 0x0f, 0 -#define SR_RESERVED_0a_1 0x0a, 0xf0, 4 -#define RG_SFD_VALUE (0x0b) -#define SR_SFD_VALUE 0x0b, 0xff, 0 -#define RG_TRX_CTRL_2 (0x0c) -#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 -#define SR_SUB_MODE 0x0c, 0x04, 2 -#define SR_BPSK_QPSK 0x0c, 0x08, 3 -#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4 -#define SR_RESERVED_0c_5 0x0c, 0x60, 5 -#define SR_RX_SAFE_MODE 0x0c, 0x80, 7 -#define RG_ANT_DIV (0x0d) -#define SR_ANT_CTRL 0x0d, 0x03, 0 -#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2 -#define SR_ANT_DIV_EN 0x0d, 0x08, 3 -#define SR_RESERVED_0d_2 0x0d, 0x70, 4 -#define SR_ANT_SEL 0x0d, 0x80, 7 -#define RG_IRQ_MASK (0x0e) -#define SR_IRQ_MASK 0x0e, 0xff, 0 -#define RG_IRQ_STATUS (0x0f) -#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0 -#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1 -#define SR_IRQ_2_RX_START 0x0f, 0x04, 2 -#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3 -#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4 -#define SR_IRQ_5_AMI 0x0f, 0x20, 5 -#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6 -#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7 -#define RG_VREG_CTRL (0x10) -#define SR_RESERVED_10_6 0x10, 0x03, 0 -#define SR_DVDD_OK 0x10, 0x04, 2 -#define SR_DVREG_EXT 0x10, 0x08, 3 -#define SR_RESERVED_10_3 0x10, 0x30, 4 -#define SR_AVDD_OK 0x10, 0x40, 6 -#define SR_AVREG_EXT 0x10, 0x80, 7 -#define RG_BATMON (0x11) -#define SR_BATMON_VTH 0x11, 0x0f, 0 -#define SR_BATMON_HR 0x11, 0x10, 4 -#define SR_BATMON_OK 0x11, 0x20, 5 -#define SR_RESERVED_11_1 0x11, 0xc0, 6 -#define RG_XOSC_CTRL (0x12) -#define SR_XTAL_TRIM 0x12, 0x0f, 0 -#define SR_XTAL_MODE 0x12, 0xf0, 4 -#define RG_RX_SYN (0x15) -#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0 -#define SR_RESERVED_15_2 0x15, 0x70, 4 -#define SR_RX_PDT_DIS 0x15, 0x80, 7 -#define RG_XAH_CTRL_1 (0x17) -#define SR_RESERVED_17_8 0x17, 0x01, 0 -#define SR_AACK_PROM_MODE 0x17, 0x02, 1 -#define SR_AACK_ACK_TIME 0x17, 0x04, 2 -#define SR_RESERVED_17_5 0x17, 0x08, 3 -#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 -#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 -#define SR_CSMA_LBT_MODE 0x17, 0x40, 6 -#define SR_RESERVED_17_1 0x17, 0x80, 7 -#define RG_FTN_CTRL (0x18) -#define SR_RESERVED_18_2 0x18, 0x7f, 0 -#define SR_FTN_START 0x18, 0x80, 7 -#define RG_PLL_CF (0x1a) -#define SR_RESERVED_1a_2 0x1a, 0x7f, 0 -#define SR_PLL_CF_START 0x1a, 0x80, 7 -#define RG_PLL_DCU (0x1b) -#define SR_RESERVED_1b_3 0x1b, 0x3f, 0 -#define SR_RESERVED_1b_2 0x1b, 0x40, 6 -#define SR_PLL_DCU_START 0x1b, 0x80, 7 -#define RG_PART_NUM (0x1c) -#define SR_PART_NUM 0x1c, 0xff, 0 -#define RG_VERSION_NUM (0x1d) -#define SR_VERSION_NUM 0x1d, 0xff, 0 -#define RG_MAN_ID_0 (0x1e) -#define SR_MAN_ID_0 0x1e, 0xff, 0 -#define RG_MAN_ID_1 (0x1f) -#define SR_MAN_ID_1 0x1f, 0xff, 0 -#define RG_SHORT_ADDR_0 (0x20) -#define SR_SHORT_ADDR_0 0x20, 0xff, 0 -#define RG_SHORT_ADDR_1 (0x21) -#define SR_SHORT_ADDR_1 0x21, 0xff, 0 -#define RG_PAN_ID_0 (0x22) -#define SR_PAN_ID_0 0x22, 0xff, 0 -#define RG_PAN_ID_1 (0x23) -#define SR_PAN_ID_1 0x23, 0xff, 0 -#define RG_IEEE_ADDR_0 (0x24) -#define SR_IEEE_ADDR_0 0x24, 0xff, 0 -#define RG_IEEE_ADDR_1 (0x25) -#define SR_IEEE_ADDR_1 0x25, 0xff, 0 -#define RG_IEEE_ADDR_2 (0x26) -#define SR_IEEE_ADDR_2 0x26, 0xff, 0 -#define RG_IEEE_ADDR_3 (0x27) -#define SR_IEEE_ADDR_3 0x27, 0xff, 0 -#define RG_IEEE_ADDR_4 (0x28) -#define SR_IEEE_ADDR_4 0x28, 0xff, 0 -#define RG_IEEE_ADDR_5 (0x29) -#define SR_IEEE_ADDR_5 0x29, 0xff, 0 -#define RG_IEEE_ADDR_6 (0x2a) -#define SR_IEEE_ADDR_6 0x2a, 0xff, 0 -#define RG_IEEE_ADDR_7 (0x2b) -#define SR_IEEE_ADDR_7 0x2b, 0xff, 0 -#define RG_XAH_CTRL_0 (0x2c) -#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0 -#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1 -#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4 -#define RG_CSMA_SEED_0 (0x2d) -#define SR_CSMA_SEED_0 0x2d, 0xff, 0 -#define RG_CSMA_SEED_1 (0x2e) -#define SR_CSMA_SEED_1 0x2e, 0x07, 0 -#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3 -#define SR_AACK_DIS_ACK 0x2e, 0x10, 4 -#define SR_AACK_SET_PD 0x2e, 0x20, 5 -#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6 -#define RG_CSMA_BE (0x2f) -#define SR_MIN_BE 0x2f, 0x0f, 0 -#define SR_MAX_BE 0x2f, 0xf0, 4 +#define RG_TRX_STATUS (0x01) +#define SR_TRX_STATUS 0x01, 0x1f, 0 +#define SR_RESERVED_01_3 0x01, 0x20, 5 +#define SR_CCA_STATUS 0x01, 0x40, 6 +#define SR_CCA_DONE 0x01, 0x80, 7 +#define RG_TRX_STATE (0x02) +#define SR_TRX_CMD 0x02, 0x1f, 0 +#define SR_TRAC_STATUS 0x02, 0xe0, 5 +#define RG_TRX_CTRL_0 (0x03) +#define SR_CLKM_CTRL 0x03, 0x07, 0 +#define SR_CLKM_SHA_SEL 0x03, 0x08, 3 +#define SR_PAD_IO_CLKM 0x03, 0x30, 4 +#define SR_PAD_IO 0x03, 0xc0, 6 +#define RG_TRX_CTRL_1 (0x04) +#define SR_IRQ_POLARITY 0x04, 0x01, 0 +#define SR_IRQ_MASK_MODE 0x04, 0x02, 1 +#define SR_SPI_CMD_MODE 0x04, 0x0c, 2 +#define SR_RX_BL_CTRL 0x04, 0x10, 4 +#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5 +#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 +#define SR_PA_EXT_EN 0x04, 0x80, 7 +#define RG_PHY_TX_PWR (0x05) +#define SR_TX_PWR 0x05, 0x0f, 0 +#define SR_PA_LT 0x05, 0x30, 4 +#define SR_PA_BUF_LT 0x05, 0xc0, 6 +#define RG_PHY_RSSI (0x06) +#define SR_RSSI 0x06, 0x1f, 0 +#define SR_RND_VALUE 0x06, 0x60, 5 +#define SR_RX_CRC_VALID 0x06, 0x80, 7 +#define RG_PHY_ED_LEVEL (0x07) +#define SR_ED_LEVEL 0x07, 0xff, 0 +#define RG_PHY_CC_CCA (0x08) +#define SR_CHANNEL 0x08, 0x1f, 0 +#define SR_CCA_MODE 0x08, 0x60, 5 +#define SR_CCA_REQUEST 0x08, 0x80, 7 +#define RG_CCA_THRES (0x09) +#define SR_CCA_ED_THRES 0x09, 0x0f, 0 +#define SR_RESERVED_09_1 0x09, 0xf0, 4 +#define RG_RX_CTRL (0x0a) +#define SR_PDT_THRES 0x0a, 0x0f, 0 +#define SR_RESERVED_0a_1 0x0a, 0xf0, 4 +#define RG_SFD_VALUE (0x0b) +#define SR_SFD_VALUE 0x0b, 0xff, 0 +#define RG_TRX_CTRL_2 (0x0c) +#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 +#define SR_SUB_MODE 0x0c, 0x04, 2 +#define SR_BPSK_QPSK 0x0c, 0x08, 3 +#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4 +#define SR_RESERVED_0c_5 0x0c, 0x60, 5 +#define SR_RX_SAFE_MODE 0x0c, 0x80, 7 +#define RG_ANT_DIV (0x0d) +#define SR_ANT_CTRL 0x0d, 0x03, 0 +#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2 +#define SR_ANT_DIV_EN 0x0d, 0x08, 3 +#define SR_RESERVED_0d_2 0x0d, 0x70, 4 +#define SR_ANT_SEL 0x0d, 0x80, 7 +#define RG_IRQ_MASK (0x0e) +#define SR_IRQ_MASK 0x0e, 0xff, 0 +#define RG_IRQ_STATUS (0x0f) +#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0 +#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1 +#define SR_IRQ_2_RX_START 0x0f, 0x04, 2 +#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3 +#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4 +#define SR_IRQ_5_AMI 0x0f, 0x20, 5 +#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6 +#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7 +#define RG_VREG_CTRL (0x10) +#define SR_RESERVED_10_6 0x10, 0x03, 0 +#define SR_DVDD_OK 0x10, 0x04, 2 +#define SR_DVREG_EXT 0x10, 0x08, 3 +#define SR_RESERVED_10_3 0x10, 0x30, 4 +#define SR_AVDD_OK 0x10, 0x40, 6 +#define SR_AVREG_EXT 0x10, 0x80, 7 +#define RG_BATMON (0x11) +#define SR_BATMON_VTH 0x11, 0x0f, 0 +#define SR_BATMON_HR 0x11, 0x10, 4 +#define SR_BATMON_OK 0x11, 0x20, 5 +#define SR_RESERVED_11_1 0x11, 0xc0, 6 +#define RG_XOSC_CTRL (0x12) +#define SR_XTAL_TRIM 0x12, 0x0f, 0 +#define SR_XTAL_MODE 0x12, 0xf0, 4 +#define RG_RX_SYN (0x15) +#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0 +#define SR_RESERVED_15_2 0x15, 0x70, 4 +#define SR_RX_PDT_DIS 0x15, 0x80, 7 +#define RG_XAH_CTRL_1 (0x17) +#define SR_RESERVED_17_8 0x17, 0x01, 0 +#define SR_AACK_PROM_MODE 0x17, 0x02, 1 +#define SR_AACK_ACK_TIME 0x17, 0x04, 2 +#define SR_RESERVED_17_5 0x17, 0x08, 3 +#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 +#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 +#define SR_CSMA_LBT_MODE 0x17, 0x40, 6 +#define SR_RESERVED_17_1 0x17, 0x80, 7 +#define RG_FTN_CTRL (0x18) +#define SR_RESERVED_18_2 0x18, 0x7f, 0 +#define SR_FTN_START 0x18, 0x80, 7 +#define RG_PLL_CF (0x1a) +#define SR_RESERVED_1a_2 0x1a, 0x7f, 0 +#define SR_PLL_CF_START 0x1a, 0x80, 7 +#define RG_PLL_DCU (0x1b) +#define SR_RESERVED_1b_3 0x1b, 0x3f, 0 +#define SR_RESERVED_1b_2 0x1b, 0x40, 6 +#define SR_PLL_DCU_START 0x1b, 0x80, 7 +#define RG_PART_NUM (0x1c) +#define SR_PART_NUM 0x1c, 0xff, 0 +#define RG_VERSION_NUM (0x1d) +#define SR_VERSION_NUM 0x1d, 0xff, 0 +#define RG_MAN_ID_0 (0x1e) +#define SR_MAN_ID_0 0x1e, 0xff, 0 +#define RG_MAN_ID_1 (0x1f) +#define SR_MAN_ID_1 0x1f, 0xff, 0 +#define RG_SHORT_ADDR_0 (0x20) +#define SR_SHORT_ADDR_0 0x20, 0xff, 0 +#define RG_SHORT_ADDR_1 (0x21) +#define SR_SHORT_ADDR_1 0x21, 0xff, 0 +#define RG_PAN_ID_0 (0x22) +#define SR_PAN_ID_0 0x22, 0xff, 0 +#define RG_PAN_ID_1 (0x23) +#define SR_PAN_ID_1 0x23, 0xff, 0 +#define RG_IEEE_ADDR_0 (0x24) +#define SR_IEEE_ADDR_0 0x24, 0xff, 0 +#define RG_IEEE_ADDR_1 (0x25) +#define SR_IEEE_ADDR_1 0x25, 0xff, 0 +#define RG_IEEE_ADDR_2 (0x26) +#define SR_IEEE_ADDR_2 0x26, 0xff, 0 +#define RG_IEEE_ADDR_3 (0x27) +#define SR_IEEE_ADDR_3 0x27, 0xff, 0 +#define RG_IEEE_ADDR_4 (0x28) +#define SR_IEEE_ADDR_4 0x28, 0xff, 0 +#define RG_IEEE_ADDR_5 (0x29) +#define SR_IEEE_ADDR_5 0x29, 0xff, 0 +#define RG_IEEE_ADDR_6 (0x2a) +#define SR_IEEE_ADDR_6 0x2a, 0xff, 0 +#define RG_IEEE_ADDR_7 (0x2b) +#define SR_IEEE_ADDR_7 0x2b, 0xff, 0 +#define RG_XAH_CTRL_0 (0x2c) +#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0 +#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1 +#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4 +#define RG_CSMA_SEED_0 (0x2d) +#define SR_CSMA_SEED_0 0x2d, 0xff, 0 +#define RG_CSMA_SEED_1 (0x2e) +#define SR_CSMA_SEED_1 0x2e, 0x07, 0 +#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3 +#define SR_AACK_DIS_ACK 0x2e, 0x10, 4 +#define SR_AACK_SET_PD 0x2e, 0x20, 5 +#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6 +#define RG_CSMA_BE (0x2f) +#define SR_MIN_BE 0x2f, 0x0f, 0 +#define SR_MAX_BE 0x2f, 0xf0, 4 #define CMD_REG 0x80 #define CMD_REG_MASK 0x3f From 2ad33244db816755a27dcdd312a70d966c85f0ee Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:59 +0200 Subject: [PATCH 144/652] at86rf230: move cal_timeout to state change This patch moves the calculation timeout of TRX_OFF to RX_AACK_ON handling to the async state change functionality. With this patch we can do a reset of calculation timeout when others TRX_OFF to RX_AACK_ON happens instead of doing this on interface up only. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 9a41deb1966c..635878833936 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -611,6 +611,11 @@ at86rf230_async_state_delay(void *context) switch (ctx->to_state) { case STATE_RX_AACK_ON: tim = ktime_set(0, c->t_off_to_aack * NSEC_PER_USEC); + /* state change from TRX_OFF to RX_AACK_ON to do a + * calibration, we need to reset the timeout for the + * next one. + */ + lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; goto change; case STATE_TX_ON: tim = ktime_set(0, c->t_off_to_tx_on * NSEC_PER_USEC); @@ -1039,9 +1044,6 @@ at86rf230_ed(struct ieee802154_hw *hw, u8 *level) static int at86rf230_start(struct ieee802154_hw *hw) { - struct at86rf230_local *lp = hw->priv; - - lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; return at86rf230_sync_state_change(hw->priv, STATE_RX_AACK_ON); } From 3b951ca7d2772834c7ca828f0fe5745480426982 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:00 +0200 Subject: [PATCH 145/652] at86rf230: add TX_ARET_ON for calibration timeout This patch adds a calibration timeout reset when change from TRX_OFF to TX_ARET_ON which also occurs a calibration. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 635878833936..f99dce5c64da 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -617,10 +617,11 @@ at86rf230_async_state_delay(void *context) */ lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; goto change; + case STATE_TX_ARET_ON: case STATE_TX_ON: tim = ktime_set(0, c->t_off_to_tx_on * NSEC_PER_USEC); - /* state change from TRX_OFF to TX_ON to do a - * calibration, we need to reset the timeout for the + /* state change from TRX_OFF to TX_ON or ARET_ON to do + * a calibration, we need to reset the timeout for the * next one. */ lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; From 2f8cdd95097bdcd8d1e2b02edb0a9deb1e034a7e Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:01 +0200 Subject: [PATCH 146/652] at86rf230: remove unnecessary tx state change All supported transceivers can do a valid state change from TRX_OFF to AACK_ON. This patch removes the state change chain from TRX_OFF -> TX_ON -> AACK_ON instead we doing a directly state change from TRX_OFF to AACK_ON. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index f99dce5c64da..6285145545a7 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -780,16 +780,6 @@ at86rf230_tx_on(void *context) at86rf230_tx_complete, true); } -static void -at86rf230_tx_trac_error(void *context) -{ - struct at86rf230_state_change *ctx = context; - struct at86rf230_local *lp = ctx->lp; - - at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - at86rf230_tx_on, true); -} - static void at86rf230_tx_trac_check(void *context) { @@ -799,12 +789,12 @@ at86rf230_tx_trac_check(void *context) const u8 trac = (buf[1] & 0xe0) >> 5; /* If trac status is different than zero we need to do a state change - * to STATE_FORCE_TRX_OFF then STATE_TX_ON to recover the transceiver - * state to TX_ON. + * to STATE_FORCE_TRX_OFF then STATE_RX_AACK_ON to recover the + * transceiver. */ if (trac) at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF, - at86rf230_tx_trac_error, true); + at86rf230_tx_on, true); else at86rf230_tx_on(context); } From 8500920317813ed420311d9cf16c345fc216fb86 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:02 +0200 Subject: [PATCH 147/652] at86rf230: change state change if from trx_off If a transmit ends in a calibration which means the transceiver do a TRX_OFF state change, we can directly change into TX_ARET state instead doing a TX_ON to TX_ARET statechange. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 6285145545a7..05ef56d5a710 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -95,6 +95,7 @@ struct at86rf230_local { unsigned long cal_timeout; s8 max_frame_retries; bool is_tx; + bool is_tx_from_off; u8 tx_retry; struct sk_buff *tx_skb; struct at86rf230_state_change tx; @@ -991,12 +992,21 @@ at86rf230_xmit_start(void *context) * are in STATE_TX_ON. The pfad differs here, so we change * the complete handler. */ - if (lp->tx_aret) - at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - at86rf230_xmit_tx_on, false); - else + if (lp->tx_aret) { + if (lp->is_tx_from_off) { + lp->is_tx_from_off = false; + at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, + at86rf230_xmit_tx_on, + false); + } else { + at86rf230_async_state_change(lp, ctx, STATE_TX_ON, + at86rf230_xmit_tx_on, + false); + } + } else { at86rf230_async_state_change(lp, ctx, STATE_TX_ON, at86rf230_write_frame, false); + } } static int @@ -1015,11 +1025,13 @@ at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) * to TX_ON, the lp->cal_timeout should be reinit by state_delay * function then to start in the next 5 minutes. */ - if (time_is_before_jiffies(lp->cal_timeout)) + if (time_is_before_jiffies(lp->cal_timeout)) { + lp->is_tx_from_off = true; at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF, at86rf230_xmit_start, false); - else + } else { at86rf230_xmit_start(ctx); + } return 0; } From d2c8bf51d07729ae6887fa84947b1f825b3729e1 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:03 +0200 Subject: [PATCH 148/652] at86rf230: add slp_tr support to start tx This patch adds support for one of the slp_tr gpio use cases which indicates the TX_START command without doing some spi bus traffic. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 05ef56d5a710..67d00fbc2e0e 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -85,6 +85,7 @@ struct at86rf230_local { struct ieee802154_hw *hw; struct at86rf2xx_chip_data *data; struct regmap *regmap; + int slp_tr; struct completion state_complete; struct at86rf230_state_change state; @@ -339,6 +340,14 @@ at86rf230_write_subreg(struct at86rf230_local *lp, return regmap_update_bits(lp->regmap, addr, mask, data << shift); } +static inline void +at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp) +{ + gpio_set_value(lp->slp_tr, 1); + udelay(1); + gpio_set_value(lp->slp_tr, 0); +} + static bool at86rf230_reg_writeable(struct device *dev, unsigned int reg) { @@ -940,13 +949,18 @@ at86rf230_write_frame_complete(void *context) u8 *buf = ctx->buf; int rc; - buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE; - buf[1] = STATE_BUSY_TX; ctx->trx.len = 2; - ctx->msg.complete = NULL; - rc = spi_async(lp->spi, &ctx->msg); - if (rc) - at86rf230_async_error(lp, ctx, rc); + + if (gpio_is_valid(lp->slp_tr)) { + at86rf230_slp_tr_rising_edge(lp); + } else { + buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE; + buf[1] = STATE_BUSY_TX; + ctx->msg.complete = NULL; + rc = spi_async(lp->spi, &ctx->msg); + if (rc) + at86rf230_async_error(lp, ctx, rc); + } } static void @@ -1680,6 +1694,7 @@ static int at86rf230_probe(struct spi_device *spi) lp = hw->priv; lp->hw = hw; lp->spi = spi; + lp->slp_tr = slp_tr; hw->parent = &spi->dev; hw->vif_data_size = sizeof(*lp); ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); From 1add15646672ff4e7fe59bec2afcb5a0c80c5e49 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:04 +0200 Subject: [PATCH 149/652] ieee802154: trace: fix endian convertion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fix endian convertions for extended address and short address handling when TP_printk is called. Signed-off-by: Alexander Aring Cc: Guido Günther Signed-off-by: Marcel Holtmann --- net/ieee802154/trace.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ieee802154/trace.h b/net/ieee802154/trace.h index 8ed9f975de01..5ac25eb6ed17 100644 --- a/net/ieee802154/trace.h +++ b/net/ieee802154/trace.h @@ -58,7 +58,7 @@ TRACE_EVENT(802154_rdev_add_virtual_intf, ), TP_printk(WPAN_PHY_PR_FMT ", virtual intf name: %s, type: %d, ea %llx", WPAN_PHY_PR_ARG, __get_str(vir_intf_name), __entry->type, - __entry->extended_addr) + __le64_to_cpu(__entry->extended_addr)) ); TRACE_EVENT(802154_rdev_del_virtual_intf, @@ -138,7 +138,8 @@ DEFINE_EVENT_PRINT(802154_le16_template, 802154_rdev_set_short_addr, __le16 le16arg), TP_ARGS(wpan_phy, wpan_dev, le16arg), TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT ", sa: 0x%04x", - WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, __entry->le16arg) + WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, + __le16_to_cpu(__entry->le16arg)) ); TRACE_EVENT(802154_rdev_set_backoff_exponent, From 27796e755a2fc6707cdf9b484a56395f703e4f3d Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 30 Apr 2015 11:57:41 +0300 Subject: [PATCH 150/652] ASoC: davinci-mcasp: Correct pm status check in suspend callback pm_runtime_enabled() will only tell if the pm runtime has been enabled for the device, which is done at probe time but will not tell the actual power state of the device. pm_runtime_active() provides this information. This patch fixes a kernel crash when doing suspend when McASP is not active. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-mcasp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index bb4b78eada58..23c91fa65ab8 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -1247,7 +1247,7 @@ static int davinci_mcasp_suspend(struct snd_soc_dai *dai) u32 reg; int i; - context->pm_state = pm_runtime_enabled(mcasp->dev); + context->pm_state = pm_runtime_active(mcasp->dev); if (!context->pm_state) pm_runtime_get_sync(mcasp->dev); From 2c62e8492ed7358bbe7da51666c7e0f6da9474ee Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Thu, 30 Apr 2015 12:41:28 +0800 Subject: [PATCH 151/652] x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus An IO port or MMIO resource assigned to a PCI host bridge may be consumed by the host bridge itself or available to its child bus/devices. The ACPI specification defines a bit (Producer/Consumer) to tell whether the resource is consumed by the host bridge itself, but firmware hasn't used that bit consistently, so we can't rely on it. Before commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored all IO port resources defined by acpi_resource_io and acpi_resource_fixed_io to filter out IO ports consumed by the host bridge itself. Commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation") started accepting all IO port and MMIO resources, which caused a regression that IO port resources consumed by the host bridge itself became available to its child devices. Then commit 63f1789ec716 ("x86/PCI/ACPI: Ignore resources consumed by host bridge itself") ignored resources consumed by the host bridge itself by checking the IORESOURCE_WINDOW flag, which accidently removed MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32 and acpi_resource_fixed_memory32. On x86 and IA64 platforms, all IO port and MMIO resources are assumed to be available to child bus/devices except one special case: IO port [0xCF8-0xCFF] is consumed by the host bridge itself to access PCI configuration space. So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution will also ease the way to consolidate ACPI PCI host bridge common code from x86, ia64 and ARM64. Related ACPI table are archived at: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Related discussions at: http://patchwork.ozlabs.org/patch/461633/ https://lkml.org/lkml/2015/3/29/304 Fixes: 63f1789ec716 (Ignore resources consumed by host bridge itself) Reported-by: Bernhard Thaler Signed-off-by: Jiang Liu Cc: 4.0+ # 4.0+ Reviewed-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki --- arch/x86/pci/acpi.c | 24 ++++++++++++++++++++++-- drivers/acpi/resource.c | 2 +- 2 files changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index e4695985f9de..d93963340c3c 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -325,6 +325,26 @@ static void release_pci_root_info(struct pci_host_bridge *bridge) kfree(info); } +/* + * An IO port or MMIO resource assigned to a PCI host bridge may be + * consumed by the host bridge itself or available to its child + * bus/devices. The ACPI specification defines a bit (Producer/Consumer) + * to tell whether the resource is consumed by the host bridge itself, + * but firmware hasn't used that bit consistently, so we can't rely on it. + * + * On x86 and IA64 platforms, all IO port and MMIO resources are assumed + * to be available to child bus/devices except one special case: + * IO port [0xCF8-0xCFF] is consumed by the host bridge itself + * to access PCI configuration space. + * + * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. + */ +static bool resource_is_pcicfg_ioport(struct resource *res) +{ + return (res->flags & IORESOURCE_IO) && + res->start == 0xCF8 && res->end == 0xCFF; +} + static void probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device, int busnum, int domain, @@ -346,8 +366,8 @@ static void probe_pci_root_info(struct pci_root_info *info, "no IO and memory resources present in _CRS\n"); else resource_list_for_each_entry_safe(entry, tmp, list) { - if ((entry->res->flags & IORESOURCE_WINDOW) == 0 || - (entry->res->flags & IORESOURCE_DISABLED)) + if ((entry->res->flags & IORESOURCE_DISABLED) || + resource_is_pcicfg_ioport(entry->res)) resource_list_destroy_entry(entry); else entry->res->name = info->name; diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 5589a6e2a023..8244f013f210 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(acpi_dev_get_resources); * @ares: Input ACPI resource object. * @types: Valid resource types of IORESOURCE_XXX * - * This is a hepler function to support acpi_dev_get_resources(), which filters + * This is a helper function to support acpi_dev_get_resources(), which filters * ACPI resource objects according to resource types. */ int acpi_dev_filter_resource_type(struct acpi_resource *ares, From aa8d6b73ea33c2167c543663ab66039ec94d58f1 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 24 Apr 2015 22:22:19 +0200 Subject: [PATCH 152/652] ARM: pxa: pxa_cplds: add lubbock and mainstone IO Historically, this support was in arch/arm/mach-pxa/lubbock.c and arch/arm/mach-pxa/mainstone.c. When gpio-pxa was moved to drivers/pxa, it became a driver, and its initialization and probing happened at postcore initcall. The lubbock code used to install the chained lubbock interrupt handler at init_irq() time. The consequence of the gpio-pxa change is that the installed chained irq handler lubbock_irq_handler() was overwritten in pxa_gpio_probe(_dt)(), removing : - the handler - the falling edge detection setting of GPIO0, which revealed the interrupt request from the lubbock IO board. As a fix, move the gpio0 chained handler setup to a place where we have the guarantee that pxa_gpio_probe() was called before, so that lubbock handler becomes the true IRQ chained handler of GPIO0, demuxing the lubbock IO board interrupts. This patch moves all that handling to a mfd driver. It's only purpose for the time being is the interrupt handling, but in the future it should encompass all the motherboard CPLDs handling : - leds - switches - hexleds The same logic applies to mainstone board. Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device") Signed-off-by: Robert Jarzmik Acked-by: Arnd Bergmann --- arch/arm/mach-pxa/Kconfig | 9 ++ arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/pxa_cplds_irqs.c | 200 +++++++++++++++++++++++++++++ 3 files changed, 210 insertions(+) create mode 100644 arch/arm/mach-pxa/pxa_cplds_irqs.c diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8896e71586f5..f09683687963 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111 config PXA310_ULPI bool +config PXA_SYSTEMS_CPLDS + tristate "Motherboard cplds" + default ARCH_LUBBOCK || MACH_MAINSTONE + help + This driver supports the Lubbock and Mainstone multifunction chip + found on the pxa25x development platform system (Lubbock) and pxa27x + development platform system (Mainstone). This IO board supports the + interrupts handling, ethernet controller, flash chips, etc ... + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index eb0bf7678a99..4087d334ecdf 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o obj-$(CONFIG_MACH_ZIPIT2) += z2.o +obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c new file mode 100644 index 000000000000..f1aeb54fabe3 --- /dev/null +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -0,0 +1,200 @@ +/* + * Intel Reference Systems cplds + * + * Copyright (C) 2014 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Cplds motherboard driver, supporting lubbock and mainstone SoC board. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FPGA_IRQ_MASK_EN 0x0 +#define FPGA_IRQ_SET_CLR 0x10 + +#define CPLDS_NB_IRQ 32 + +struct cplds { + void __iomem *base; + int irq; + unsigned int irq_mask; + struct gpio_desc *gpio0; + struct irq_domain *irqdomain; +}; + +static irqreturn_t cplds_irq_handler(int in_irq, void *d) +{ + struct cplds *fpga = d; + unsigned long pending; + unsigned int bit; + + pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask; + for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) + generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit)); + + return IRQ_HANDLED; +} + +static void cplds_irq_mask_ack(struct irq_data *d) +{ + struct cplds *fpga = irq_data_get_irq_chip_data(d); + unsigned int cplds_irq = irqd_to_hwirq(d); + unsigned int set, bit = BIT(cplds_irq); + + fpga->irq_mask &= ~bit; + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); + set = readl(fpga->base + FPGA_IRQ_SET_CLR); + writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR); +} + +static void cplds_irq_unmask(struct irq_data *d) +{ + struct cplds *fpga = irq_data_get_irq_chip_data(d); + unsigned int cplds_irq = irqd_to_hwirq(d); + unsigned int bit = BIT(cplds_irq); + + fpga->irq_mask |= bit; + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); +} + +static struct irq_chip cplds_irq_chip = { + .name = "pxa_cplds", + .irq_mask_ack = cplds_irq_mask_ack, + .irq_unmask = cplds_irq_unmask, + .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE, +}; + +static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct cplds *fpga = d->host_data; + + irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq); + irq_set_chip_data(irq, fpga); + + return 0; +} + +static const struct irq_domain_ops cplds_irq_domain_ops = { + .xlate = irq_domain_xlate_twocell, + .map = cplds_irq_domain_map, +}; + +static int cplds_resume(struct platform_device *pdev) +{ + struct cplds *fpga = platform_get_drvdata(pdev); + + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); + + return 0; +} + +static int cplds_probe(struct platform_device *pdev) +{ + struct resource *res; + struct cplds *fpga; + int ret; + unsigned int base_irq = 0; + unsigned long irqflags = 0; + + fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL); + if (!fpga) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) { + fpga->irq = (unsigned int)res->start; + irqflags = res->flags; + } + if (!fpga->irq) + return -ENODEV; + + base_irq = platform_get_irq(pdev, 1); + if (base_irq < 0) + base_irq = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + fpga->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(fpga->base)) + return PTR_ERR(fpga->base); + + platform_set_drvdata(pdev, fpga); + + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); + writel(0, fpga->base + FPGA_IRQ_SET_CLR); + + ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler, + irqflags, dev_name(&pdev->dev), fpga); + if (ret == -ENOSYS) + return -EPROBE_DEFER; + + if (ret) { + dev_err(&pdev->dev, "couldn't request main irq%d: %d\n", + fpga->irq, ret); + return ret; + } + + irq_set_irq_wake(fpga->irq, 1); + fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node, + CPLDS_NB_IRQ, + &cplds_irq_domain_ops, fpga); + if (!fpga->irqdomain) + return -ENODEV; + + if (base_irq) { + ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0, + CPLDS_NB_IRQ); + if (ret) { + dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n", + base_irq, base_irq + CPLDS_NB_IRQ); + return ret; + } + } + + return 0; +} + +static int cplds_remove(struct platform_device *pdev) +{ + struct cplds *fpga = platform_get_drvdata(pdev); + + irq_set_chip_and_handler(fpga->irq, NULL, NULL); + + return 0; +} + +static const struct of_device_id cplds_id_table[] = { + { .compatible = "intel,lubbock-cplds-irqs", }, + { .compatible = "intel,mainstone-cplds-irqs", }, + { } +}; +MODULE_DEVICE_TABLE(of, cplds_id_table); + +static struct platform_driver cplds_driver = { + .driver = { + .name = "pxa_cplds_irqs", + .of_match_table = of_match_ptr(cplds_id_table), + }, + .probe = cplds_probe, + .remove = cplds_remove, + .resume = cplds_resume, +}; + +module_platform_driver(cplds_driver); + +MODULE_DESCRIPTION("PXA Cplds interrupts driver"); +MODULE_AUTHOR("Robert Jarzmik "); +MODULE_LICENSE("GPL"); From 277688639f98a9e34a6f109f9cd6129f92e718c1 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 24 Apr 2015 23:22:35 +0200 Subject: [PATCH 153/652] ARM: pxa: mainstone: use new pxa_cplds driver As the interrupt handling was transferred to the pxa_cplds driver, make the switch in mainstone platform code. Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device") Signed-off-by: Robert Jarzmik Acked-by: Arnd Bergmann --- arch/arm/mach-pxa/include/mach/mainstone.h | 6 +- arch/arm/mach-pxa/mainstone.c | 115 +++++---------------- 2 files changed, 31 insertions(+), 90 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h index 1bfc4e822a41..e82a7d31104e 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -120,7 +120,9 @@ #define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ /* board specific IRQs */ -#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) +#define MAINSTONE_NR_IRQS IRQ_BOARD_START + +#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x)) #define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) #define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) #define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) @@ -136,6 +138,4 @@ #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) -#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16) - #endif diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 78b84c0dfc79..2c0658cf6be2 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ #include +#include #include #include #include @@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = { GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, }; -static unsigned long mainstone_irq_enabled; - -static void mainstone_mask_irq(struct irq_data *d) -{ - int mainstone_irq = (d->irq - MAINSTONE_IRQ(0)); - MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq)); -} - -static void mainstone_unmask_irq(struct irq_data *d) -{ - int mainstone_irq = (d->irq - MAINSTONE_IRQ(0)); - /* the irq can be acknowledged only if deasserted, so it's done here */ - MST_INTSETCLR &= ~(1 << mainstone_irq); - MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq)); -} - -static struct irq_chip mainstone_irq_chip = { - .name = "FPGA", - .irq_ack = mainstone_mask_irq, - .irq_mask = mainstone_mask_irq, - .irq_unmask = mainstone_unmask_irq, -}; - -static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled; - do { - /* clear useless edge notification */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - if (likely(pending)) { - irq = MAINSTONE_IRQ(0) + __ffs(pending); - generic_handle_irq(irq); - } - pending = MST_INTSETCLR & mainstone_irq_enabled; - } while (pending); -} - -static void __init mainstone_init_irq(void) -{ - int irq; - - pxa27x_init_irq(); - - /* setup extra Mainstone irqs */ - for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) { - irq_set_chip_and_handler(irq, &mainstone_irq_chip, - handle_level_irq); - if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14)) - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); - else - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - set_irq_flags(MAINSTONE_IRQ(8), 0); - set_irq_flags(MAINSTONE_IRQ(12), 0); - - MST_INTMSKENA = 0; - MST_INTSETCLR = 0; - - irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler); - irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); -} - -#ifdef CONFIG_PM - -static void mainstone_irq_resume(void) -{ - MST_INTMSKENA = mainstone_irq_enabled; -} - -static struct syscore_ops mainstone_irq_syscore_ops = { - .resume = mainstone_irq_resume, -}; - -static int __init mainstone_irq_device_init(void) -{ - if (machine_is_mainstone()) - register_syscore_ops(&mainstone_irq_syscore_ops); - - return 0; -} - -device_initcall(mainstone_irq_device_init); - -#endif - - static struct resource smc91x_resources[] = { [0] = { .start = (MST_ETH_PHYS + 0x300), @@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = { }, }; +static struct resource mst_cplds_resources[] = { + [0] = { + .start = MST_FPGA_PHYS + 0xc0, + .end = MST_FPGA_PHYS + 0xe0 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_GPIO_TO_IRQ(0), + .end = PXA_GPIO_TO_IRQ(0), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, + [2] = { + .start = MAINSTONE_IRQ(0), + .end = MAINSTONE_IRQ(15), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mst_cplds_device = { + .name = "pxa_cplds_irqs", + .id = -1, + .resource = &mst_cplds_resources[0], + .num_resources = 3, +}; + static struct platform_device *platform_devices[] __initdata = { &smc91x_device, &mst_flash_device[0], &mst_flash_device[1], &mst_gpio_keys_device, + &mst_cplds_device, }; static struct pxaohci_platform_data mainstone_ohci_platform_data = { @@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .atag_offset = 0x100, /* BLOB boot parameter setting */ .map_io = mainstone_map_io, .nr_irqs = MAINSTONE_NR_IRQS, - .init_irq = mainstone_init_irq, + .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_time = pxa_timer_init, .init_machine = mainstone_init, From fc9e38c0f4d38bfc68b405cf48365d65f7b6319e Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 14 Dec 2014 23:04:14 +0100 Subject: [PATCH 154/652] ARM: pxa: lubbock: use new pxa_cplds driver As the interrupt handling was transferred to the pxa_cplds driver, make the switch in lubbock platform code. Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device") Signed-off-by: Robert Jarzmik Acked-by: Arnd Bergmann --- arch/arm/mach-pxa/include/mach/lubbock.h | 7 +- arch/arm/mach-pxa/lubbock.c | 108 ++++++----------------- 2 files changed, 33 insertions(+), 82 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 958cd6af9384..1eecf794acd2 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -37,7 +37,9 @@ #define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100) /* Board specific IRQs */ -#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) +#define LUBBOCK_NR_IRQS IRQ_BOARD_START + +#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x)) #define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) #define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) #define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ @@ -47,8 +49,7 @@ #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) -#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16) -#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55) +#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32) #ifndef __ASSEMBLY__ extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index d8a1be619f21..4ac9ab80d24b 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include +#include #include #include #include @@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set) } EXPORT_SYMBOL(lubbock_set_misc_wr); -static unsigned long lubbock_irq_enabled; - -static void lubbock_mask_irq(struct irq_data *d) -{ - int lubbock_irq = (d->irq - LUBBOCK_IRQ(0)); - LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq)); -} - -static void lubbock_unmask_irq(struct irq_data *d) -{ - int lubbock_irq = (d->irq - LUBBOCK_IRQ(0)); - /* the irq can be acknowledged only if deasserted, so it's done here */ - LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq); - LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq)); -} - -static struct irq_chip lubbock_irq_chip = { - .name = "FPGA", - .irq_ack = lubbock_mask_irq, - .irq_mask = lubbock_mask_irq, - .irq_unmask = lubbock_unmask_irq, -}; - -static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; - do { - /* clear our parent irq */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - if (likely(pending)) { - irq = LUBBOCK_IRQ(0) + __ffs(pending); - generic_handle_irq(irq); - } - pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; - } while (pending); -} - -static void __init lubbock_init_irq(void) -{ - int irq; - - pxa25x_init_irq(); - - /* setup extra lubbock irqs */ - for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { - irq_set_chip_and_handler(irq, &lubbock_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler); - irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); -} - -#ifdef CONFIG_PM - -static void lubbock_irq_resume(void) -{ - LUB_IRQ_MASK_EN = lubbock_irq_enabled; -} - -static struct syscore_ops lubbock_irq_syscore_ops = { - .resume = lubbock_irq_resume, -}; - -static int __init lubbock_irq_device_init(void) -{ - if (machine_is_lubbock()) { - register_syscore_ops(&lubbock_irq_syscore_ops); - return 0; - } - return -ENODEV; -} - -device_initcall(lubbock_irq_device_init); - -#endif - static int lubbock_udc_is_connected(void) { return (LUB_MISC_RD & (1 << 9)) == 0; @@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = { }, }; +static struct resource lubbock_cplds_resources[] = { + [0] = { + .start = LUBBOCK_FPGA_PHYS + 0xc0, + .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_GPIO_TO_IRQ(0), + .end = PXA_GPIO_TO_IRQ(0), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, + [2] = { + .start = LUBBOCK_IRQ(0), + .end = LUBBOCK_IRQ(6), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lubbock_cplds_device = { + .name = "pxa_cplds_irqs", + .id = -1, + .resource = &lubbock_cplds_resources[0], + .num_resources = 3, +}; + + static struct platform_device *devices[] __initdata = { &sa1111_device, &smc91x_device, &lubbock_flash_device[0], &lubbock_flash_device[1], + &lubbock_cplds_device, }; static struct pxafb_mode_info sharp_lm8v31_mode = { @@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") /* Maintainer: MontaVista Software Inc. */ .map_io = lubbock_map_io, .nr_irqs = LUBBOCK_NR_IRQS, - .init_irq = lubbock_init_irq, + .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_time = pxa_timer_init, .init_machine = lubbock_init, From 3349fb64b2927407017d970dd5c4daf3c5ad69f8 Mon Sep 17 00:00:00 2001 From: Chris Bainbridge Date: Wed, 29 Apr 2015 21:21:40 +0100 Subject: [PATCH 155/652] ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook Commit 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' caused the MacBook firmware to expose the SBS, resulting in intermittent hangs of several minutes on boot, and failure to detect or report the battery. Fix this by adding a 5 us delay to the start of each SMBUS transaction. This timing is the result of experimentation - hangs were observed with 3 us but never with 5 us. Fixes: 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' Link: https://bugzilla.kernel.org/show_bug.cgi?id=94651 Signed-off-by: Chris Bainbridge Cc: 3.18+ # 3.18+ [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sbshc.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index 26e5b5060523..bf034f8b7c1a 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "sbshc.h" #define PREFIX "ACPI: " @@ -87,6 +88,8 @@ enum acpi_smb_offset { ACPI_SMB_ALARM_DATA = 0x26, /* 2 bytes alarm data */ }; +static bool macbook; + static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data) { return ec_read(hc->offset + address, data); @@ -132,6 +135,8 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol, } mutex_lock(&hc->lock); + if (macbook) + udelay(5); if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp)) goto end; if (temp) { @@ -257,12 +262,29 @@ extern int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit, acpi_handle handle, acpi_ec_query_func func, void *data); +static int macbook_dmi_match(const struct dmi_system_id *d) +{ + pr_debug("Detected MacBook, enabling workaround\n"); + macbook = true; + return 0; +} + +static struct dmi_system_id acpi_smbus_dmi_table[] = { + { macbook_dmi_match, "Apple MacBook", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") }, + }, + { }, +}; + static int acpi_smbus_hc_add(struct acpi_device *device) { int status; unsigned long long val; struct acpi_smb_hc *hc; + dmi_check_system(acpi_smbus_dmi_table); + if (!device) return -EINVAL; From 2375a212ca06d35f90841bc511b3e9ae8a95a82e Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Wed, 29 Apr 2015 10:37:24 +0200 Subject: [PATCH 156/652] ACPI / documentation: fix a sentence about GPIO resources The sentence "These resources are used be used to pass ..." contains a suspicious repetition, likely the author meant "These resources can be used to pass ...". Simplify the wording. Signed-off-by: Antonio Ospite Signed-off-by: Rafael J. Wysocki --- Documentation/acpi/enumeration.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 750401f91341..15dfce708ebf 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -253,7 +253,7 @@ input driver: GPIO support ~~~~~~~~~~~~ ACPI 5 introduced two new resources to describe GPIO connections: GpioIo -and GpioInt. These resources are used be used to pass GPIO numbers used by +and GpioInt. These resources can be used to pass GPIO numbers used by the device to the driver. ACPI 5.1 extended this with _DSD (Device Specific Data) which made it possible to name the GPIOs among other things. From 12392f5896c9affc03c1ddd95a83c32238862a58 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 29 Apr 2015 16:55:43 +0300 Subject: [PATCH 157/652] ARM: shmobile: koelsch: Fix adv7511 IRQ sensing The adv7511 IRQ is low level triggered, not falling edge triggered. The wrong sense configuration results in no interrupt being triggered at all, breaking hotplug detection. Fix it. Signed-off-by: Laurent Pinchart Fixes: 83a0731b39f3 ("ARM: shmobile: koelsch: Add DU HDMI output support") Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 74c3212f1f11..824ddab9c3ad 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -545,7 +545,7 @@ compatible = "adi,adv7511w"; reg = <0x39>; interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; adi,input-depth = <8>; adi,input-colorspace = "rgb"; From 52cdc33c383850433d8c93e4aa469ed9bfcd1c56 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Wed, 29 Apr 2015 14:52:46 +0300 Subject: [PATCH 158/652] clk: qcom: Fix MSM8916 venus divider value One of the video codec clock frequencies has incorrect divider value. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-msm8916.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c index d3458474eb3a..b15d52b56c6a 100644 --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -1115,7 +1115,7 @@ static struct clk_rcg2 usb_hs_system_clk_src = { static const struct freq_tbl ftbl_gcc_venus0_vcodec0_clk[] = { F(100000000, P_GPLL0, 8, 0, 0), F(160000000, P_GPLL0, 5, 0, 0), - F(228570000, P_GPLL0, 5, 0, 0), + F(228570000, P_GPLL0, 3.5, 0, 0), { } }; From 5d45ed8f5bfaeaf50576b8d663796ee905ccf2a0 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Wed, 29 Apr 2015 14:52:47 +0300 Subject: [PATCH 159/652] clk: qcom: Fix MSM8916 gfx3d_clk_src configuration The gfx3d_clk_src parents configuration is incorrect. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-msm8916.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c index b15d52b56c6a..c66f7bc2ae87 100644 --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -71,8 +71,8 @@ static const char *gcc_xo_gpll0_bimc[] = { static const struct parent_map gcc_xo_gpll0a_gpll1_gpll2a_map[] = { { P_XO, 0 }, { P_GPLL0_AUX, 3 }, - { P_GPLL2_AUX, 2 }, { P_GPLL1, 1 }, + { P_GPLL2_AUX, 2 }, }; static const char *gcc_xo_gpll0a_gpll1_gpll2a[] = { From ce1d94919de3ffc1769b327792ea0189db6e7551 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 30 Mar 2015 10:43:22 -0700 Subject: [PATCH 160/652] thermal: Use bool function return values of true/false not 1/0 Use the normal return values for bool functions Signed-off-by: Joe Perches Signed-off-by: Zhang Rui --- drivers/thermal/thermal_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 0531c752fbbb..8e391812e503 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -103,7 +103,7 @@ static inline int of_thermal_get_ntrips(struct thermal_zone_device *tz) static inline bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip) { - return 0; + return false; } static inline const struct thermal_trip * of_thermal_get_trip_points(struct thermal_zone_device *tz) From 88776f366ede7d9cdce60bd2c9753dd6d6fa8b77 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 1 May 2015 09:20:34 +0200 Subject: [PATCH 161/652] ALSA: hda - Add headphone quirk for Lifebook E752 Fujitsu Lifebook E752 laptop needs a similar quirk done for Lifebook T731. Otherwise the headphone is always muted. Reported-and-tested-by: Christian Weber Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e2afd53cc14c..eb2fc79cbd32 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5119,6 +5119,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9099, "Sony VAIO S13", ALC275_FIXUP_SONY_DISABLE_AAMIX), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK), SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN), + SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_BXBT2807_MIC), From 5793affe8c723ece8114b898ab9003c7d97f86d1 Mon Sep 17 00:00:00 2001 From: Jeppe Ledet-Pedersen Date: Wed, 29 Apr 2015 17:05:01 +0200 Subject: [PATCH 162/652] net: can: xilinx_can: fix extended frame handling Using IDR_SRR in RXFIFO_ID to test for the presence of data is only valid for standard frames. For extended frames the bit is always 1 and IDR_RTR should be used instead. This patch switches the check to use CAN_RTR_FLAG which is correctly set when reading the ID. The patch also changes the DW1/DW2 to be read unconditionally, since this is necessary to remove the frame from the RXFIFO. Signed-off-by: Jeppe Ledet-Pedersen Acked-by: Kedareswara rao Appana Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 6bddfe062b51..fc55e8e0351d 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -509,10 +509,11 @@ static int xcan_rx(struct net_device *ndev) cf->can_id |= CAN_RTR_FLAG; } - if (!(id_xcan & XCAN_IDR_SRR_MASK)) { - data[0] = priv->read_reg(priv, XCAN_RXFIFO_DW1_OFFSET); - data[1] = priv->read_reg(priv, XCAN_RXFIFO_DW2_OFFSET); + /* DW1/DW2 must always be read to remove message from RXFIFO */ + data[0] = priv->read_reg(priv, XCAN_RXFIFO_DW1_OFFSET); + data[1] = priv->read_reg(priv, XCAN_RXFIFO_DW2_OFFSET); + if (!(cf->can_id & CAN_RTR_FLAG)) { /* Change Xilinx CAN data format to socketCAN data format */ if (cf->can_dlc > 0) *(__be32 *)(cf->data) = cpu_to_be32(data[0]); From e944ec2ca00fb0170ba9d7f2aeec32c22dc0d4ec Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Wed, 29 Apr 2015 21:08:48 +0900 Subject: [PATCH 163/652] perf report: Fix -T/--threads option to work again The commit 512ae1bd6acb ("perf tools: Consolidate management of default sort orders") changed default value of the 'sort_order' variable to NULL indicating that users don't set any sort keys on the command line. However it missed to update a check in perf_evlist__tty_browse_hists() so that 'perf report -T' cannot show the per-thread values after the normal output. This patch fixes it to work again. Note that the -T option only works on --stdio and neither --sort nor --parent option was given. Signed-off-by: Namhyung Kim Cc: Andi Kleen Cc: David Ahern Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1430309328-28317-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-report.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 476cdf7afcca..b63aeda719be 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -329,7 +329,7 @@ static int perf_evlist__tty_browse_hists(struct perf_evlist *evlist, fprintf(stdout, "\n\n"); } - if (sort_order == default_sort_order && + if (sort_order == NULL && parent_pattern == default_parent_pattern) { fprintf(stdout, "#\n# (%s)\n#\n", help); From 545774bd6e1427d98dde77244329d2311c5eca6f Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 27 Apr 2015 14:51:35 +0800 Subject: [PATCH 164/652] ASoC: mc13783: Fix wrong mask value used in mc13xxx_reg_rmw() calls mc13xxx_reg_rmw() won't change any bit if passing 0 to the mask field. Pass AUDIO_SSI_SEL instead of 0 for the mask field to set AUDIO_SSI_SEL bit. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/mc13783.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/mc13783.c b/sound/soc/codecs/mc13783.c index 2ffb9a0570dc..3d44fc50e4d0 100644 --- a/sound/soc/codecs/mc13783.c +++ b/sound/soc/codecs/mc13783.c @@ -623,14 +623,14 @@ static int mc13783_probe(struct snd_soc_codec *codec) AUDIO_SSI_SEL, 0); else mc13xxx_reg_rmw(priv->mc13xxx, MC13783_AUDIO_CODEC, - 0, AUDIO_SSI_SEL); + AUDIO_SSI_SEL, AUDIO_SSI_SEL); if (priv->dac_ssi_port == MC13783_SSI1_PORT) mc13xxx_reg_rmw(priv->mc13xxx, MC13783_AUDIO_DAC, AUDIO_SSI_SEL, 0); else mc13xxx_reg_rmw(priv->mc13xxx, MC13783_AUDIO_DAC, - 0, AUDIO_SSI_SEL); + AUDIO_SSI_SEL, AUDIO_SSI_SEL); return 0; } From d3cc2e865055f58378de86c6b51a5636328ca827 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 10 Apr 2015 11:49:44 -0700 Subject: [PATCH 165/652] MAINTAINERS: Update mach-bcm maintainers list Add Ray Jui and Scott Branden for the mach-bcm/ entries. Signed-off-by: Florian Fainelli --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0d68b2..ba352d9ecbcf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2118,6 +2118,8 @@ F: drivers/net/ethernet/broadcom/bnx2x/ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE M: Christian Daudt M: Florian Fainelli +M: Ray Jui +M: Scott Branden L: bcm-kernel-feedback-list@broadcom.com T: git git://github.com/broadcom/mach-bcm S: Maintained From 049a4c506586c293b6fe54b5c61762230417dbf8 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 10 Apr 2015 11:50:40 -0700 Subject: [PATCH 166/652] MAINTAINERS: Remove Christian Daudt for mach-bcm Christian has not been responding to mach-bcm related emails since around July 2013, and with Scott and Ray maintaining the platform, we should have enough coverage to get that going now. Signed-off-by: Florian Fainelli --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index ba352d9ecbcf..7222089a80a0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2116,7 +2116,6 @@ S: Supported F: drivers/net/ethernet/broadcom/bnx2x/ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE -M: Christian Daudt M: Florian Fainelli M: Ray Jui M: Scott Branden From 1de2a662d0f2d3b211b7d10ea6578abe5c39eda3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 10 Apr 2015 11:52:40 -0700 Subject: [PATCH 167/652] MAINTAINERS: Update brcmstb entry We have not heard back from Marc in a while, since we last asked him to ack/nack this change here: https://lkml.org/lkml/2015/1/14/1004 This was back in January, we are in the 3.21^W4.1 merge window now, so, as outlined in this email thread, remove him from the MAINTAINERS list now. Signed-off-by: Florian Fainelli --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7222089a80a0..0aa1a427f8ea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2169,7 +2169,6 @@ S: Maintained F: drivers/usb/gadget/udc/bcm63xx_udc.* BROADCOM BCM7XXX ARM ARCHITECTURE -M: Marc Carino M: Brian Norris M: Gregory Fong M: Florian Fainelli From ae142bd9976532aa5232ab0b00e621690d8bfe6a Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 27 Apr 2015 08:55:18 +0200 Subject: [PATCH 168/652] ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs Whereas for Armada 370 and XP the main PLL frequency was 2GHz for the Armada 375, 38x and 39x, the frequency is 1GHz. When writing support for these last SoCs, there was no official value for the PLL. Now that we have it, this patch fixes it in the device tree. This value is currently only used by the NAND driver for the setting the NAND timing. Fortunately it is not actually used: all the mainline board with a NAND flash comes with a NAND device tree node using the "marvell,nand-keep-config" property. With this property the timings are not modified in the kernel driver and are kept from the bootloader. Signed-off-by: Gregory CLEMENT Acked-by: Andrew Lunn Acked-by: Marcin Wojtas --- arch/arm/boot/dts/armada-375.dtsi | 2 +- arch/arm/boot/dts/armada-38x.dtsi | 2 +- arch/arm/boot/dts/armada-39x.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index c675257f2377..f076ff856d8b 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -69,7 +69,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; /* 25 MHz reference crystal */ refclk: oscillator { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ed2dd8ba4080..218a2acd36e5 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -585,7 +585,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; /* 25 MHz reference crystal */ diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 0e85fc15ceda..ecd1318109ba 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -502,7 +502,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; }; }; From 5f55d2ae699d1756ad6132786c7f9c27dc456b66 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 28 Apr 2015 10:23:30 -0600 Subject: [PATCH 169/652] vfio-pci: Log device requests more verbosely Log some clues indicating whether the user is receiving device request interfaces or not listening. This can help indicate why a driver unbind is blocked or explain why QEMU automatically unplugged a device from the VM. Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index 69fab0fd15ae..e9851add6f4e 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -907,8 +907,14 @@ static void vfio_pci_request(void *device_data, unsigned int count) mutex_lock(&vdev->igate); if (vdev->req_trigger) { - dev_dbg(&vdev->pdev->dev, "Requesting device from user\n"); + if (!(count % 10)) + dev_notice_ratelimited(&vdev->pdev->dev, + "Relaying device request to user (#%u)\n", + count); eventfd_signal(vdev->req_trigger, 1); + } else if (count == 0) { + dev_warn(&vdev->pdev->dev, + "No device request channel registered, blocked until released by user\n"); } mutex_unlock(&vdev->igate); From 0a73125d308c1453dada1e2998f1c7f68094c45f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 30 Apr 2015 12:55:02 -0700 Subject: [PATCH 170/652] power: reset: Add MFD_SYSCON depends for brcmstb The Broadcom STB reboot driver depends on MFD_SYSCON, it uses syscon_regmap_lookup_by_phandle() which will not lookup syscon phandles if MFD_SYSCON is disabled, and instead will return -ENOSYS since it is turned into an inline stub. Fixes: 030494e75064c ("power: reset: Add reboot driver for brcmstb") Signed-off-by: Florian Fainelli Signed-off-by: Sebastian Reichel --- drivers/power/reset/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index aad9c3318c02..17d93a73c513 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -41,6 +41,7 @@ config POWER_RESET_AXXIA config POWER_RESET_BRCMSTB bool "Broadcom STB reset driver" depends on ARM || MIPS || COMPILE_TEST + depends on MFD_SYSCON default ARCH_BRCMSTB help This driver provides restart support for Broadcom STB boards. From 8ebb7e9c1a502cfc300618c19c3c6f06fc76d237 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Thu, 30 Apr 2015 22:05:58 +0200 Subject: [PATCH 171/652] power: bq27x00_battery: Add missing MODULE_ALIAS Without MODULE_ALIAS bq27x00_battery module won't get loaded automatically. Signed-off-by: Marek Belisko Signed-off-by: Sebastian Reichel --- drivers/power/bq27x00_battery.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index a57433de5c24..b6b98378faa3 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -1109,6 +1109,14 @@ static void __exit bq27x00_battery_exit(void) } module_exit(bq27x00_battery_exit); +#ifdef CONFIG_BATTERY_BQ27X00_PLATFORM +MODULE_ALIAS("platform:bq27000-battery"); +#endif + +#ifdef CONFIG_BATTERY_BQ27X00_I2C +MODULE_ALIAS("i2c:bq27000-battery"); +#endif + MODULE_AUTHOR("Rodolfo Giometti "); MODULE_DESCRIPTION("BQ27x00 battery monitor driver"); MODULE_LICENSE("GPL"); From db7d4d7f40215843000cb9d441c9149fd42ea36b Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 1 May 2015 16:31:41 -0600 Subject: [PATCH 172/652] vfio: Fix runaway interruptible timeout Commit 13060b64b819 ("vfio: Add and use device request op for vfio bus drivers") incorrectly makes use of an interruptible timeout. When interrupted, the signal remains pending resulting in subsequent timeouts occurring instantly. This makes the loop spin at a much higher rate than intended. Instead of making this completely non-interruptible, we can change this into a sort of interruptible-once behavior and use the "once" to log debug information. The driver API doesn't allow us to abort and return an error code. Signed-off-by: Alex Williamson Fixes: 13060b64b819 Cc: stable@vger.kernel.org # v4.0 --- drivers/vfio/vfio.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 0d336625ac71..e1278fe04b1e 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -710,6 +710,8 @@ void *vfio_del_group_dev(struct device *dev) void *device_data = device->device_data; struct vfio_unbound_dev *unbound; unsigned int i = 0; + long ret; + bool interrupted = false; /* * The group exists so long as we have a device reference. Get @@ -755,9 +757,22 @@ void *vfio_del_group_dev(struct device *dev) vfio_device_put(device); - } while (wait_event_interruptible_timeout(vfio.release_q, - !vfio_dev_present(group, dev), - HZ * 10) <= 0); + if (interrupted) { + ret = wait_event_timeout(vfio.release_q, + !vfio_dev_present(group, dev), HZ * 10); + } else { + ret = wait_event_interruptible_timeout(vfio.release_q, + !vfio_dev_present(group, dev), HZ * 10); + if (ret == -ERESTARTSYS) { + interrupted = true; + dev_warn(dev, + "Device is currently in use, task" + " \"%s\" (%d) " + "blocked until device is released", + current->comm, task_pid_nr(current)); + } + } + } while (ret <= 0); vfio_group_put(group); From 9b071a43553d6b2df4364951639f61076a8dd676 Mon Sep 17 00:00:00 2001 From: Philippe Coval Date: Sat, 2 May 2015 15:14:08 +0200 Subject: [PATCH 173/652] ideapad_laptop: Add Lenovo G40-30 to devices without radio switch Lenovo G40-30 does not provide any physical radio switch to user. Therefore disable the rfkill switch identically to the Yoga 2 approach. (Note for later, models ids are sorted alphabetically). Benefit is to make wireless available again without unloading module. It was tested successfully on 4.1.0-rc1 base with this model: (LENOVO_MT_80FY_BU_idea_FM_Lenovo G40-30). BugLink: https://bugs.launchpad.net/ideapad-laptop/+bug/1450946 Cc: platform-driver-x86@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Philippe Coval Signed-off-by: Darren Hart --- drivers/platform/x86/ideapad-laptop.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index b3d419a84723..b496db87bc05 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -829,6 +829,13 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) * report all radios as hardware-blocked. */ static const struct dmi_system_id no_hw_rfkill_list[] = { + { + .ident = "Lenovo G40-30", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G40-30"), + }, + }, { .ident = "Lenovo Yoga 2 11 / 13 / Pro", .matches = { From f673821864899153142365aca888435815ac93f0 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 8 Apr 2015 20:51:57 +0200 Subject: [PATCH 174/652] ath9k: fix per-packet tx power configuration Do not use ieee80211_vif pointer in ath_get_rate_txpower() since it has been overwritten by setup_frame_info() and it will result in a corrupted tx power configuration. Set per-packet tx power in setup_frame_info() according to current vif tx power. Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/xmit.c | 52 +++++++++++++-------------- 1 file changed, 25 insertions(+), 27 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 0acd079ba96b..3ad79bb4f2c2 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1103,28 +1103,14 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, struct sk_buff *skb; struct ath_frame_info *fi; struct ieee80211_tx_info *info; - struct ieee80211_vif *vif; struct ath_hw *ah = sc->sc_ah; if (sc->tx99_state || !ah->tpc_enabled) return MAX_RATE_POWER; skb = bf->bf_mpdu; - info = IEEE80211_SKB_CB(skb); - vif = info->control.vif; - - if (!vif) { - max_power = sc->cur_chan->cur_txpower; - goto out; - } - - if (vif->bss_conf.txpower_type != NL80211_TX_POWER_LIMITED) { - max_power = min_t(u8, sc->cur_chan->cur_txpower, - 2 * vif->bss_conf.txpower); - goto out; - } - fi = get_frame_info(skb); + info = IEEE80211_SKB_CB(skb); if (!AR_SREV_9300_20_OR_LATER(ah)) { int txpower = fi->tx_power; @@ -1161,25 +1147,26 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, txpower -= 2; txpower = max(txpower, 0); - max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min_t(u8, max_power, txpower); + max_power = min_t(u8, ah->tx_power[rateidx], txpower); + + /* XXX: clamp minimum TX power at 1 for AR9160 since if + * max_power is set to 0, frames are transmitted at max + * TX power + */ + if (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) + max_power = 1; } else if (!bf->bf_state.bfs_paprd) { if (rateidx < 8 && (info->flags & IEEE80211_TX_CTL_STBC)) max_power = min_t(u8, ah->tx_power_stbc[rateidx], - 2 * vif->bss_conf.txpower); + fi->tx_power); else max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min(max_power, fi->tx_power); + fi->tx_power); } else { max_power = ah->paprd_training_power; } -out: - /* XXX: clamp minimum TX power at 1 for AR9160 since if max_power - * is set to 0, frames are transmitted at max TX power - */ - return (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) ? 1 : max_power; + + return max_power; } static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, @@ -2129,6 +2116,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct ath_node *an = NULL; enum ath9k_key_type keytype; bool short_preamble = false; + u8 txpower; /* * We check if Short Preamble is needed for the CTS rate by @@ -2145,6 +2133,16 @@ static void setup_frame_info(struct ieee80211_hw *hw, if (sta) an = (struct ath_node *) sta->drv_priv; + if (tx_info->control.vif) { + struct ieee80211_vif *vif = tx_info->control.vif; + + txpower = 2 * vif->bss_conf.txpower; + } else { + struct ath_softc *sc = hw->priv; + + txpower = sc->cur_chan->cur_txpower; + } + memset(fi, 0, sizeof(*fi)); fi->txq = -1; if (hw_key) @@ -2155,7 +2153,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; - fi->tx_power = MAX_RATE_POWER; + fi->tx_power = txpower; if (!rate) return; From 1424532b2163bf1580f4b1091a5801e12310fac5 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 29 Apr 2015 11:29:19 +0100 Subject: [PATCH 175/652] ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops Patch 22b3c181c6c324a46f71aae806d8ddbe61d25761 ("arm: dma-mapping: limit IOMMU mapping size") added a check for IO address space size. However this patch broke IOMMU initialization for typical platforms initialized from device tree, which get the default IO address space size of 4GiB. This value doesn't fit into size_t and fails a check introduced by that commit resulting in failed dma-mapping/iommu initialization. This patch fixes this issue by adding proper support for full 4GiB address space size. Signed-off-by: Marek Szyprowski Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/dma-iommu.h | 2 +- arch/arm/mm/dma-mapping.c | 13 +++++-------- 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 8e3fcb924db6..2ef282f96651 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -25,7 +25,7 @@ struct dma_iommu_mapping { }; struct dma_iommu_mapping * -arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size); +arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size); void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 09c5fe3d30c2..7e7583ddd607 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1878,7 +1878,7 @@ struct dma_map_ops iommu_coherent_ops = { * arm_iommu_attach_device function. */ struct dma_iommu_mapping * -arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) +arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size) { unsigned int bits = size >> PAGE_SHIFT; unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long); @@ -1886,6 +1886,10 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) int extensions = 1; int err = -ENOMEM; + /* currently only 32-bit DMA address space is supported */ + if (size > DMA_BIT_MASK(32) + 1) + return ERR_PTR(-ERANGE); + if (!bitmap_size) return ERR_PTR(-EINVAL); @@ -2057,13 +2061,6 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size, if (!iommu) return false; - /* - * currently arm_iommu_create_mapping() takes a max of size_t - * for size param. So check this limit for now. - */ - if (size > SIZE_MAX) - return false; - mapping = arm_iommu_create_mapping(dev->bus, dma_base, size); if (IS_ERR(mapping)) { pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n", From 024587dc2137a22096372fc8df4b283e84e057b5 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Thu, 30 Apr 2015 14:34:35 +0100 Subject: [PATCH 176/652] ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE CPU_ARM1020_CPU_IDLE is not defined in Kconfig. The last reference on LKML dates back to 2001, so we can safely remove the comments to make static analysis tools happy. Signed-off-by: Valentin Rothberg Signed-off-by: Russell King --- arch/arm/mm/proc-arm1020.S | 2 -- arch/arm/mm/proc-arm1020e.S | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index aa0519eed698..774ef1323554 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -22,8 +22,6 @@ * * These are the low level assembler for performing cache and TLB * functions on the arm1020. - * - * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt */ #include #include diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index bff4c7f70fd6..ae3c27b71594 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -22,8 +22,6 @@ * * These are the low level assembler for performing cache and TLB * functions on the arm1020e. - * - * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt */ #include #include From 13f2fa7cb33d82b95e1e1dab8c95fa619b49f418 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Thu, 30 Apr 2015 14:36:03 +0100 Subject: [PATCH 177/652] ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block The block could never be compiled; CPU_ICACHE_STREAMING_DISABLE has not been defined in Kconfig since the very first Git commit. Hence, we can safely remove the entire block. Signed-off-by: Valentin Rothberg Signed-off-by: Russell King --- arch/arm/mm/proc-arm925.S | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ede8c54ab4aa..32a47cc19076 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -441,9 +441,6 @@ ENTRY(cpu_arm925_set_pte_ext) .type __arm925_setup, #function __arm925_setup: mov r0, #0 -#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE) - orr r0,r0,#1 << 7 -#endif /* Transparent on, D-cache clean & flush mode. See NOTE2 above */ orr r0,r0,#1 << 1 @ transparent mode on From 59c3191628fd1ced948d099f3138b92b06281520 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 30 Apr 2015 19:51:43 +0100 Subject: [PATCH 178/652] ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") broke booting for Kirkwood. The kernel would say: Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported processor variant (0x56251311). Fix it by removing the extraneous .long __feroceon_setup from the feroceon_proc_info macro. Fixes: bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") Reported-by: Florian Fainelli Suggested-by: Arnd Bergmann Signed-off-by: Andrew Lunn Tested-by: Florian Fainelli Acked-by: Ard Biesheuvel Tested-by: Aaro Koskinen Signed-off-by: Russell King --- arch/arm/mm/proc-feroceon.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index e494d6d6acbe..92e08bf37aad 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -602,7 +602,6 @@ __\name\()_proc_info: PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ initfn __feroceon_setup, __\name\()_proc_info - .long __feroceon_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP From 338d9dd3e2aee00a9198e8bf6e7d535d3feeaf32 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 May 2015 17:15:23 +0100 Subject: [PATCH 179/652] ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs PPIs are affine by nature, so the interrupt-affinity property is not used and therefore we shouldn't print a warning in its absence. Reported-by: Maxime Ripard Reviewed-by: Maxime Ripard Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event_cpu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 91c7ba182dcd..becf7ad6eddc 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -303,12 +303,17 @@ static int probe_current_pmu(struct arm_pmu *pmu) static int of_pmu_irq_cfg(struct platform_device *pdev) { - int i; + int i, irq; int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); if (!irqs) return -ENOMEM; + /* Don't bother with PPIs; they're already affine */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0 && irq_is_percpu(irq)) + return 0; + for (i = 0; i < pdev->num_resources; ++i) { struct device_node *dn; int cpu; From 3b8786ff7a1b31645ae2c26a2ec32dbd42ac1094 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 May 2015 17:16:01 +0100 Subject: [PATCH 180/652] ARM: 8352/1: perf: Fix the pmu node name in warning message With commit 9fd85eb502a7 ("ARM: pmu: add support for interrupt-affinity property"), we print a warning when we find a PMU SPI with a missing missing interrupt-affinity property in a pmu node. Unfortunately, we pass the wrong (NULL) device node to of_node_full_name, resulting in unhelpful messages such as: hw perfevents: Failed to parse /interrupt-affinity[0] This patch fixes the name to that of the pmu node. Fixes: 9fd85eb502a7 (ARM: pmu: add support for interrupt-affinity property) Acked-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event_cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index becf7ad6eddc..213919ba326f 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -322,7 +322,7 @@ static int of_pmu_irq_cfg(struct platform_device *pdev) i); if (!dn) { pr_warn("Failed to parse %s/interrupt-affinity[%d]\n", - of_node_full_name(dn), i); + of_node_full_name(pdev->dev.of_node), i); break; } From a5d28090405038ca1f40c13f38d6d4285456efee Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 30 Apr 2015 09:40:40 -0700 Subject: [PATCH 181/652] codel: fix maxpacket/mtu confusion Under presence of TSO/GSO/GRO packets, codel at low rates can be quite useless. In following example, not a single packet was ever dropped, while average delay in codel queue is ~100 ms ! qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms Sent 134376498 bytes 88797 pkt (dropped 0, overlimits 0 requeues 0) backlog 13626b 3p requeues 0 count 0 lastcount 0 ldelay 96.9ms drop_next 0us maxpacket 9084 ecn_mark 0 drop_overlimit 0 This comes from a confusion of what should be the minimal backlog. It is pretty clear it is not 64KB or whatever max GSO packet ever reached the qdisc. codel intent was to use MTU of the device. After the fix, we finally drop some packets, and rtt/cwnd of my single TCP flow are meeting our expectations. qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms Sent 102798497 bytes 67912 pkt (dropped 1365, overlimits 0 requeues 0) backlog 6056b 3p requeues 0 count 1 lastcount 1 ldelay 36.3ms drop_next 0us maxpacket 10598 ecn_mark 0 drop_overlimit 0 Signed-off-by: Eric Dumazet Cc: Kathleen Nichols Cc: Dave Taht Cc: Van Jacobson Signed-off-by: David S. Miller --- include/net/codel.h | 10 +++++++--- net/sched/sch_codel.c | 2 +- net/sched/sch_fq_codel.c | 2 +- 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/include/net/codel.h b/include/net/codel.h index aeee28081245..1e18005f7f65 100644 --- a/include/net/codel.h +++ b/include/net/codel.h @@ -120,11 +120,13 @@ static inline u32 codel_time_to_us(codel_time_t val) * struct codel_params - contains codel parameters * @target: target queue size (in time units) * @interval: width of moving time window + * @mtu: device mtu, or minimal queue backlog in bytes. * @ecn: is Explicit Congestion Notification enabled */ struct codel_params { codel_time_t target; codel_time_t interval; + u32 mtu; bool ecn; }; @@ -166,10 +168,12 @@ struct codel_stats { u32 ecn_mark; }; -static void codel_params_init(struct codel_params *params) +static void codel_params_init(struct codel_params *params, + const struct Qdisc *sch) { params->interval = MS2TIME(100); params->target = MS2TIME(5); + params->mtu = psched_mtu(qdisc_dev(sch)); params->ecn = false; } @@ -180,7 +184,7 @@ static void codel_vars_init(struct codel_vars *vars) static void codel_stats_init(struct codel_stats *stats) { - stats->maxpacket = 256; + stats->maxpacket = 0; } /* @@ -234,7 +238,7 @@ static bool codel_should_drop(const struct sk_buff *skb, stats->maxpacket = qdisc_pkt_len(skb); if (codel_time_before(vars->ldelay, params->target) || - sch->qstats.backlog <= stats->maxpacket) { + sch->qstats.backlog <= params->mtu) { /* went below - stay below for at least interval */ vars->first_above_time = 0; return false; diff --git a/net/sched/sch_codel.c b/net/sched/sch_codel.c index de28f8e968e8..7a0bdb16ac92 100644 --- a/net/sched/sch_codel.c +++ b/net/sched/sch_codel.c @@ -164,7 +164,7 @@ static int codel_init(struct Qdisc *sch, struct nlattr *opt) sch->limit = DEFAULT_CODEL_LIMIT; - codel_params_init(&q->params); + codel_params_init(&q->params, sch); codel_vars_init(&q->vars); codel_stats_init(&q->stats); diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index 1e52decb7b59..c244c45b78d7 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -391,7 +391,7 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt) q->perturbation = prandom_u32(); INIT_LIST_HEAD(&q->new_flows); INIT_LIST_HEAD(&q->old_flows); - codel_params_init(&q->cparams); + codel_params_init(&q->cparams, sch); codel_stats_init(&q->cstats); q->cparams.ecn = true; From edac450d5b5d47aa11e614f19c8f9b17f362e608 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 1 May 2015 08:27:59 +0800 Subject: [PATCH 182/652] netlink: Remove max_size setting We currently limit the hash table size to 64K which is very bad as even 10 years ago it was relatively easy to generate millions of sockets. Since the hash table is naturally limited by memory allocation failure, we don't really need an explicit limit so this patch removes it. Signed-off-by: Herbert Xu Acked-by: Thomas Graf Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index ec4adbdcb9b4..daa0b818174b 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -3139,7 +3139,6 @@ static const struct rhashtable_params netlink_rhashtable_params = { .key_len = netlink_compare_arg_len, .obj_hashfn = netlink_hash, .obj_cmpfn = netlink_compare, - .max_size = 65536, .automatic_shrinking = true, }; From c0adf54a10903b59037a4c5fcb933dfeeb7b2624 Mon Sep 17 00:00:00 2001 From: shamir rabinovitch Date: Thu, 30 Apr 2015 20:58:07 -0400 Subject: [PATCH 183/652] net/rds: fix unaligned memory access rdma_conn_param private data is copied using memcpy after headers such as cma_hdr (see cma_resolve_ib_udp as example). so the start of the private data is aligned to the end of the structure that come before. if this structure end with u32 the meaning is that the start of the private data will be 4 bytes aligned. structures that use u8/u16/u32/u64 are naturally aligned but in case the structure start is not 8 bytes aligned, all u64 members of this structure will not be aligned. to solve this issue we must use special macros that allow unaligned access to those unaligned members. Addresses the following kernel log seen when attempting to use RDMA: Kernel unaligned access at TPC[10507a88] rds_ib_cm_connect_complete+0x1bc/0x1e0 [rds_rdma] Acked-by: Chien Yen Signed-off-by: shamir rabinovitch [Minor tweaks for top of tree by:] Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/rds/ib_cm.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c index 31b74f5e61ad..29144a60019f 100644 --- a/net/rds/ib_cm.c +++ b/net/rds/ib_cm.c @@ -183,8 +183,17 @@ void rds_ib_cm_connect_complete(struct rds_connection *conn, struct rdma_cm_even /* If the peer gave us the last packet it saw, process this as if * we had received a regular ACK. */ - if (dp && dp->dp_ack_seq) - rds_send_drop_acked(conn, be64_to_cpu(dp->dp_ack_seq), NULL); + if (dp) { + /* dp structure start is not guaranteed to be 8 bytes aligned. + * Since dp_ack_seq is 64-bit extended load operations can be + * used so go through get_unaligned to avoid unaligned errors. + */ + u64 dp_ack_seq = get_unaligned(&dp->dp_ack_seq); + + if (dp_ack_seq) + rds_send_drop_acked(conn, be64_to_cpu(dp_ack_seq), + NULL); + } rds_connect_complete(conn); } From f0e9fc503a0d6c9d74ca5b6d1aaf87febbbd9b06 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 30 Apr 2015 21:47:42 -0400 Subject: [PATCH 184/652] drivers/net: include for modular stmmac_platform code This file is built off of a tristate Kconfig option and also contains modular function calls so it should explicitly include module.h to avoid compile breakage during header shuffles done in the future. Cc: Giuseppe Cavallaro Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 705bbdf93940..68aec5c460db 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -23,6 +23,7 @@ *******************************************************************************/ #include +#include #include #include #include From 4212b5433187d01b5ae83664b06e990a9116250f Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Fri, 1 May 2015 10:43:52 -0400 Subject: [PATCH 185/652] net: dsa: mv88e6xxx: unregister mv88e6352 driver Add the missing unregister for the mv88e6352_switch_driver. Signed-off-by: Vivien Didelot Reviewed-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index af639ab4c55b..cf309aa92802 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -1469,6 +1469,9 @@ static void __exit mv88e6xxx_cleanup(void) #if IS_ENABLED(CONFIG_NET_DSA_MV88E6171) unregister_switch_driver(&mv88e6171_switch_driver); #endif +#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352) + unregister_switch_driver(&mv88e6352_switch_driver); +#endif #if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) unregister_switch_driver(&mv88e6123_61_65_switch_driver); #endif From 59486329b46f31532ab032014fbaae72e9f190c3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:38 -0700 Subject: [PATCH 186/652] fm10k: Do not assume budget will never be 0 for NAPI The netpoll path will call napi->poll with a budget of 0 in order to clean the Tx rings only. This change updates the fm10k driver so that it will correctly support that instead of cleaning 1 Rx frame if a budget of 0 is received. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/fm10k/fm10k_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c index 1b0661e3573b..c754b2027281 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c @@ -610,7 +610,7 @@ static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector, unsigned int total_bytes = 0, total_packets = 0; u16 cleaned_count = fm10k_desc_unused(rx_ring); - do { + while (likely(total_packets < budget)) { union fm10k_rx_desc *rx_desc; /* return some buffers to hardware, one at a time is too slow */ @@ -659,7 +659,7 @@ static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector, /* update budget accounting */ total_packets++; - } while (likely(total_packets < budget)); + } /* place incomplete frames back on ring for completion */ rx_ring->skb = skb; From eb781397904e5d6b90c80463eaa9dc592831bdae Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:44 -0700 Subject: [PATCH 187/652] r8169: Do not use dev_kfree_skb in xmit path The function r8169_csum_workaround is called in the ndo_start_xmit path of the r8169 driver. As such it should not be using dev_kfree_skb as it is not irq safe, so instead we should be using dev_kfree_skb_any for freeing in the dropped path, and dev_consume_skb_any for any frames that were transmitted. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index c70ab40d8698..3df51faf18ae 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6884,7 +6884,7 @@ static void r8169_csum_workaround(struct rtl8169_private *tp, rtl8169_start_xmit(nskb, tp->dev); } while (segs); - dev_kfree_skb(skb); + dev_consume_skb_any(skb); } else if (skb->ip_summed == CHECKSUM_PARTIAL) { if (skb_checksum_help(skb) < 0) goto drop; @@ -6896,7 +6896,7 @@ static void r8169_csum_workaround(struct rtl8169_private *tp, drop: stats = &tp->dev->stats; stats->tx_dropped++; - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); } } From e7fcd5439ffd76e499b7ba4a2f8e99645addff3e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:50 -0700 Subject: [PATCH 188/652] ixgbevf: Use dev_kfree_skb_any in xmit path, not dev_kfree_skb With netpoll making use of the transmit function it is possible for the ndo_start_xmit function to be called with irqs disabled. As such we need to use dev_kfree_skb_any in the Tx cleanup path for frames that are dropped. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index a16d267fbce4..e71cdde9cb01 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3612,7 +3612,7 @@ static int ixgbevf_xmit_frame(struct sk_buff *skb, struct net_device *netdev) u8 *dst_mac = skb_header_pointer(skb, 0, 0, NULL); if (!dst_mac || is_link_local_ether_addr(dst_mac)) { - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } From 2e70aedd3d522b018c01df172cd213a8a75e2d55 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 3 May 2015 08:04:28 +0800 Subject: [PATCH 189/652] Revert "net: kernel socket should be released in init_net namespace" This reverts commit c243d7e20996254f89c28d4838b5feca735c030d. That patch is solving a non-existant problem while creating a real problem. Just because a socket is allocated in the init name space doesn't mean that it gets hashed in the init name space. When we unhash it the name space must be the same as the one we had when we hashed it. So this patch is completely bogus and causes socket leaks. Reported-by: Andrey Wagin Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/sock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/sock.c b/net/core/sock.c index e891bcf325ca..292f42228bfb 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1474,8 +1474,8 @@ void sk_release_kernel(struct sock *sk) return; sock_hold(sk); - sock_net_set(sk, get_net(&init_net)); sock_release(sk->sk_socket); + sock_net_set(sk, get_net(&init_net)); sock_put(sk); } EXPORT_SYMBOL(sk_release_kernel); From efdbd2b30caa65dd9e687853afa4d7ce8b39447e Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 1 May 2015 17:36:37 -0400 Subject: [PATCH 190/652] macvlan: Propagate promiscuity setting to lower devices. When a macvlan device is placed in promiscuous mode, it currently just sets it's multicast mask to permissive, but doesn't change the state of the lower device. As a result, not all multicast traffic can be received on such device. Additionally, none of a vlan traffic can be received on such device as well. This patch propagates the promiscuous mode setting to lower device so that lower device may receive all packets that macvlan may be interested in. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index b227a13f6473..9f59f17dc317 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -599,10 +599,18 @@ static int macvlan_open(struct net_device *dev) goto del_unicast; } + if (dev->flags & IFF_PROMISC) { + err = dev_set_promiscuity(lowerdev, 1); + if (err < 0) + goto clear_multi; + } + hash_add: macvlan_hash_add(vlan); return 0; +clear_multi: + dev_set_allmulti(lowerdev, -1); del_unicast: dev_uc_del(lowerdev, dev->dev_addr); out: @@ -638,6 +646,9 @@ static int macvlan_stop(struct net_device *dev) if (dev->flags & IFF_ALLMULTI) dev_set_allmulti(lowerdev, -1); + if (dev->flags & IFF_PROMISC) + dev_set_promiscuity(lowerdev, -1); + dev_uc_del(lowerdev, dev->dev_addr); hash_del: @@ -696,6 +707,10 @@ static void macvlan_change_rx_flags(struct net_device *dev, int change) if (dev->flags & IFF_UP) { if (change & IFF_ALLMULTI) dev_set_allmulti(lowerdev, dev->flags & IFF_ALLMULTI ? 1 : -1); + if (change & IFF_PROMISC) + dev_set_promiscuity(lowerdev, + dev->flags & IFF_PROMISC ? 1 : -1); + } } From 184af16b09360d6273fd6160e6ff7f8e2482ef23 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 23 Apr 2015 13:43:43 +0300 Subject: [PATCH 191/652] mmc: core: add missing pm event in mmc_pm_notify to fix hib restore The PM_RESTORE_PREPARE is not handled now in mmc_pm_notify(), as result mmc_rescan() could be scheduled and executed at late hibernation restore stages when MMC device is suspended already - which, in turn, will lead to system crash on TI dra7-evm board: WARNING: CPU: 0 PID: 3188 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x258/0x374() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in User mode during Functional access Hence, add missed PM_RESTORE_PREPARE PM event in mmc_pm_notify(). Fixes: 4c2ef25fe0b8 (mmc: fix all hangs related to mmc/sd card...) Signed-off-by: Grygorii Strashko Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index c296bc098fe2..92e7671426eb 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2651,6 +2651,7 @@ int mmc_pm_notify(struct notifier_block *notify_block, switch (mode) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: + case PM_RESTORE_PREPARE: spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 1; spin_unlock_irqrestore(&host->lock, flags); From 7829fb09a2b4268b30dd9bc782fa5ebee278b137 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 30 Apr 2015 04:13:52 +0200 Subject: [PATCH 192/652] lib: make memzero_explicit more robust against dead store elimination In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by: Stephan Mueller Tested-by: Stephan Mueller Signed-off-by: Daniel Borkmann Cc: Theodore Ts'o Cc: Stephan Mueller Cc: Hannes Frederic Sowa Cc: mancha security Cc: Mark Charlebois Cc: Behan Webster Signed-off-by: Herbert Xu --- include/linux/compiler-gcc.h | 16 +++++++++++++++- include/linux/compiler-intel.h | 3 +++ include/linux/compiler.h | 4 ++++ lib/string.c | 2 +- 4 files changed, 23 insertions(+), 2 deletions(-) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index cdf13ca7cac3..371e560d13cf 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -9,10 +9,24 @@ + __GNUC_MINOR__ * 100 \ + __GNUC_PATCHLEVEL__) - /* Optimization barrier */ + /* The "volatile" is due to gcc bugs */ #define barrier() __asm__ __volatile__("": : :"memory") +/* + * This version is i.e. to prevent dead stores elimination on @ptr + * where gcc and llvm may behave differently when otherwise using + * normal barrier(): while gcc behavior gets along with a normal + * barrier(), llvm needs an explicit input variable to be assumed + * clobbered. The issue is as follows: while the inline asm might + * access any memory it wants, the compiler could have fit all of + * @ptr into memory registers instead, and since @ptr never escaped + * from that, it proofed that the inline asm wasn't touching any of + * it. This version works well with both compilers, i.e. we're telling + * the compiler that the inline asm absolutely may see the contents + * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 + */ +#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") /* * This macro obfuscates arithmetic on a variable address so that gcc diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h index ba147a1727e6..0c9a2f2c2802 100644 --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -13,9 +13,12 @@ /* Intel ECC compiler doesn't support gcc specific asm stmts. * It uses intrinsics to do the equivalent things. */ +#undef barrier_data #undef RELOC_HIDE #undef OPTIMIZER_HIDE_VAR +#define barrier_data(ptr) barrier() + #define RELOC_HIDE(ptr, off) \ ({ unsigned long __ptr; \ __ptr = (unsigned long) (ptr); \ diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 0e41ca0e5927..867722591be2 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -169,6 +169,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define barrier() __memory_barrier() #endif +#ifndef barrier_data +# define barrier_data(ptr) barrier() +#endif + /* Unreachable code */ #ifndef unreachable # define unreachable() do { } while (1) diff --git a/lib/string.c b/lib/string.c index a5792019193c..bb3d4b6993c4 100644 --- a/lib/string.c +++ b/lib/string.c @@ -607,7 +607,7 @@ EXPORT_SYMBOL(memset); void memzero_explicit(void *s, size_t count) { memset(s, 0, count); - barrier(); + barrier_data(s); } EXPORT_SYMBOL(memzero_explicit); From f440c4ee3e53f767974fe60bcbc0b6687a5fb53f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Sat, 2 May 2015 12:08:42 +0200 Subject: [PATCH 193/652] hwrng: bcm63xx - Fix driver compilation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - s/clk_didsable_unprepare/clk_disable_unprepare - s/prov/priv - s/error/ret (bcm63xx_rng_probe) Fixes: 6229c16060fe ("hwrng: bcm63xx - make use of devm_hwrng_register") Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Signed-off-by: Herbert Xu --- drivers/char/hw_random/bcm63xx-rng.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/char/hw_random/bcm63xx-rng.c b/drivers/char/hw_random/bcm63xx-rng.c index d1494ecd9e11..4b31f1387f37 100644 --- a/drivers/char/hw_random/bcm63xx-rng.c +++ b/drivers/char/hw_random/bcm63xx-rng.c @@ -57,7 +57,7 @@ static void bcm63xx_rng_cleanup(struct hwrng *rng) val &= ~RNG_EN; __raw_writel(val, priv->regs + RNG_CTRL); - clk_didsable_unprepare(prov->clk); + clk_disable_unprepare(priv->clk); } static int bcm63xx_rng_data_present(struct hwrng *rng, int wait) @@ -97,14 +97,14 @@ static int bcm63xx_rng_probe(struct platform_device *pdev) priv->rng.name = pdev->name; priv->rng.init = bcm63xx_rng_init; priv->rng.cleanup = bcm63xx_rng_cleanup; - prov->rng.data_present = bcm63xx_rng_data_present; + priv->rng.data_present = bcm63xx_rng_data_present; priv->rng.data_read = bcm63xx_rng_data_read; priv->clk = devm_clk_get(&pdev->dev, "ipsec"); if (IS_ERR(priv->clk)) { - error = PTR_ERR(priv->clk); - dev_err(&pdev->dev, "no clock for device: %d\n", error); - return error; + ret = PTR_ERR(priv->clk); + dev_err(&pdev->dev, "no clock for device: %d\n", ret); + return ret; } if (!devm_request_mem_region(&pdev->dev, r->start, @@ -120,11 +120,11 @@ static int bcm63xx_rng_probe(struct platform_device *pdev) return -ENOMEM; } - error = devm_hwrng_register(&pdev->dev, &priv->rng); - if (error) { + ret = devm_hwrng_register(&pdev->dev, &priv->rng); + if (ret) { dev_err(&pdev->dev, "failed to register rng device: %d\n", - error); - return error; + ret); + return ret; } dev_info(&pdev->dev, "registered RNG driver\n"); From ff419b3f95ab7a97c5f72876b53f12a249dacc2a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 26 Apr 2015 20:13:34 -0700 Subject: [PATCH 194/652] mac80211: fix 90 kernel-doc warnings Eliminate 90 of these warnings: Warning(..//include/net/mac80211.h:1682): No description found for parameter 'drv_priv[0]' Signed-off-by: Randy Dunlap Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b4bef1152c05..8e3668b44c29 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1666,6 +1666,8 @@ struct ieee80211_tx_control { * @sta: station table entry, %NULL for per-vif queue * @tid: the TID for this queue (unused for per-vif queue) * @ac: the AC for this queue + * @drv_priv: data area for driver use, will always be aligned to + * sizeof(void *). * * The driver can obtain packets from this queue by calling * ieee80211_tx_dequeue(). From 1bf1b431d98d7e5b5419876d4c219469e60693e1 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 16 Apr 2015 17:08:44 +0300 Subject: [PATCH 195/652] iommu/amd: Fix bug in put_pasid_state_wait This patch fixes a bug in put_pasid_state_wait that appeared in kernel 4.0 The bug is that pasid_state->count wasn't decremented before entering the wait_event. Thus, the condition in wait_event will never be true. The fix is to decrement (atomically) the pasid_state->count before the wait_event. Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org #v4.0 Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_v2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c index a1cbba9056fd..3465faf1809e 100644 --- a/drivers/iommu/amd_iommu_v2.c +++ b/drivers/iommu/amd_iommu_v2.c @@ -266,6 +266,7 @@ static void put_pasid_state(struct pasid_state *pasid_state) static void put_pasid_state_wait(struct pasid_state *pasid_state) { + atomic_dec(&pasid_state->count); wait_event(pasid_state->wq, !atomic_read(&pasid_state->count)); free_pasid_state(pasid_state); } From ec6bfca835b61df360881c1bf89268f69fed2a61 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Mon, 4 May 2015 15:50:47 +0800 Subject: [PATCH 196/652] ALSA: hda/realtek - Fix typo for ALC286/ALC288 Delete more one break for ALC286/ALC288. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index eb2fc79cbd32..516a0da6c080 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3738,7 +3738,6 @@ static void alc_headset_mode_default(struct hda_codec *codec) case 0x10ec0288: alc_process_coef_fw(codec, coef0288); break; - break; case 0x10ec0292: alc_process_coef_fw(codec, coef0292); break; From a00212e21928640486d3cc939cf4d908e8522016 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 4 May 2015 01:58:27 +0200 Subject: [PATCH 197/652] ACPI / documentation: Fix ambiguity in the GPIO properties document The first paragraph in Documentation/acpi/gpio-properties.txt is ambiguous, so make it more clear. Reported-by: Antonio Ospite Acked-by: Antonio Ospite Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki --- Documentation/acpi/gpio-properties.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt index ae36fcf86dc7..f35dad11f0de 100644 --- a/Documentation/acpi/gpio-properties.txt +++ b/Documentation/acpi/gpio-properties.txt @@ -1,9 +1,9 @@ _DSD Device Properties Related to GPIO -------------------------------------- -With the release of ACPI 5.1 and the _DSD configuration objecte names -can finally be given to GPIOs (and other things as well) returned by -_CRS. Previously, we were only able to use an integer index to find +With the release of ACPI 5.1, the _DSD configuration object finally +allows names to be given to GPIOs (and other things as well) returned +by _CRS. Previously, we were only able to use an integer index to find the corresponding GPIO, which is pretty error prone (it depends on the _CRS output ordering, for example). From a718c92219b35e8a75175fde85c4566ac5730273 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 4 May 2015 14:50:29 +0200 Subject: [PATCH 198/652] hostfs: Use correct mask for file mode S_IFMT is obviously wrong and needs to be 0777. We're interested in the file mode, not the type. Fixes: b98b91029c (hostfs: No need to box and later unbox the file mode) Reported-by: Markus Stenberg Signed-off-by: Richard Weinberger --- fs/hostfs/hostfs_kern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c index ef263174acd2..07d8d8f52faf 100644 --- a/fs/hostfs/hostfs_kern.c +++ b/fs/hostfs/hostfs_kern.c @@ -581,7 +581,7 @@ static int hostfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, if (name == NULL) goto out_put; - fd = file_create(name, mode & S_IFMT); + fd = file_create(name, mode & 0777); if (fd < 0) error = fd; else From 74d77e50f23123938fbb7987eba71310864e6a7c Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Apr 2015 10:59:17 -0500 Subject: [PATCH 199/652] pinctrl: mediatek: mtk-common: initialize unmask cppcheck detected an uninitialized variable: [drivers/pinctrl/mediatek/pinctrl-mtk-common.c:897]: (error) Uninitialized variable: unmask unmask should be initialized to zero to ensure unmasking only occurs if a previous mask occurred. The current situation is that the unmask variable could contain any random garbage causing random unexpected unmasking. Signed-off-by: Colin Ian King Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index 493294c0ebe6..474812e2b0cb 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -881,6 +881,8 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, if (!mtk_eint_get_mask(pctl, eint_num)) { mtk_eint_mask(d); unmask = 1; + } else { + unmask = 0; } clr_bit = 0xff << eint_offset; From 622532bb2fad8fe342fb685727ae0be566f6be5d Mon Sep 17 00:00:00 2001 From: Witold Szczeponik Date: Fri, 1 May 2015 19:05:20 +0200 Subject: [PATCH 200/652] ACPI / PNP: add two IDs to list for PNPACPI device enumeration Commit eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) changed the way how ACPI devices are enumerated and when they are added to the PNP bus. However, it broke the sound card support on (at least) a vintage IBM ThinkPad 600E: with said commit applied, two of the necessary "CSC01xx" devices are not added to the PNP bus and hence can not be found during the initialization of the "snd-cs4236" module. As a consequence, loading "snd-cs4236" causes null pointer exceptions. The attached patch fixes the problem end re-enables sound on the IBM ThinkPad 600E. Fixes: eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) Signed-off-by: Witold Szczeponik Cc: 3.16+ # 3.16+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_pnp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c index b193f8425999..ff6d8adc9cda 100644 --- a/drivers/acpi/acpi_pnp.c +++ b/drivers/acpi/acpi_pnp.c @@ -304,6 +304,8 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = { {"PNPb006"}, /* cs423x-pnpbios */ {"CSC0100"}, + {"CSC0103"}, + {"CSC0110"}, {"CSC0000"}, {"GIM0100"}, /* Guillemot Turtlebeach something appears to be cs4232 compatible */ /* es18xx-pnpbios */ From 810e4425c224af6be67dff68c8832af1b5a11f89 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Sun, 3 May 2015 21:11:47 +0300 Subject: [PATCH 201/652] ASoC: uda1380: Avoid accessing i2c bus when codec is disabled set_dai_fmt_both() callback is called from snd_soc_runtime_set_dai_fmt() which is called from snd_soc_register_card(), but at this time codec is not powered on yet. Replace direct i2c write with regcache write. Fixes: 5f0acedddf533c (ASoC: rx1950_uda1380: Use static DAI format setup) Fixes: 5cc10b9b77c234 (ASoC: h1940_uda1380: Use static DAI format setup) Signed-off-by: Vasily Khoruzhick Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/uda1380.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index dc7778b6dd7f..c3c33bd0df1c 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -437,7 +437,7 @@ static int uda1380_set_dai_fmt_both(struct snd_soc_dai *codec_dai, if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) return -EINVAL; - uda1380_write(codec, UDA1380_IFACE, iface); + uda1380_write_reg_cache(codec, UDA1380_IFACE, iface); return 0; } From 102bcb6ed2d1c3ffcc7269afc957c2df11942085 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 4 May 2015 08:54:41 -0700 Subject: [PATCH 202/652] ARM: OMAP2+: Fix omap off idle power consumption creeping up If we use a combination of VMODE and I2C4 for retention modes, eventually the off idle power consumption will creep up by about 23mW, even during off mode with I2C4 always staying enabled. Turns out this is because of erratum i531 "Extra Power Consumed When Repeated Start Operation Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)" as pointed out by Nishanth Menon . Let's fix the issue by adding i2c_cfg_clear_mask for the bits to clear when initializing the I2C4 adapter so we can clear SREN bit that drives the I2C4 lines low otherwise when there is no traffic. Fixes: 3b8c4ebb7630 ("ARM: OMAP3: Fix idle mode signaling for Cc: stable@vger.kernel.org # v3.16+ sys_clkreq and sys_off_mode") Cc: Kevin Hilman Cc: Tero Kristo Reviewed-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm-regbits-34xx.h | 1 + arch/arm/mach-omap2/prm-regbits-44xx.h | 1 + arch/arm/mach-omap2/vc.c | 12 ++++++++++-- arch/arm/mach-omap2/vc.h | 2 ++ arch/arm/mach-omap2/vc3xxx_data.c | 1 + arch/arm/mach-omap2/vc44xx_data.c | 1 + 6 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index cbefbd7cfdb5..661d753df584 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -112,6 +112,7 @@ #define OMAP3430_VC_CMD_ONLP_SHIFT 16 #define OMAP3430_VC_CMD_RET_SHIFT 8 #define OMAP3430_VC_CMD_OFF_SHIFT 0 +#define OMAP3430_SREN_MASK (1 << 4) #define OMAP3430_HSEN_MASK (1 << 3) #define OMAP3430_MCODE_MASK (0x7 << 0) #define OMAP3430_VALID_MASK (1 << 24) diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h index b1c7a33e00e7..e794828dee55 100644 --- a/arch/arm/mach-omap2/prm-regbits-44xx.h +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -35,6 +35,7 @@ #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1 #define OMAP4430_GLOBAL_WUEN_MASK (1 << 16) #define OMAP4430_HSMCODE_MASK (0x7 << 0) +#define OMAP4430_SRMODEEN_MASK (1 << 4) #define OMAP4430_HSMODEEN_MASK (1 << 3) #define OMAP4430_HSSCLL_SHIFT 24 #define OMAP4430_ICEPICK_RST_SHIFT 9 diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index be9ef834fa81..076fd20d7e5a 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm) * idle. And we can also scale voltages to zero for off-idle. * Note that no actual voltage scaling during off-idle will * happen unless the board specific twl4030 PMIC scripts are - * loaded. + * loaded. See also omap_vc_i2c_init for comments regarding + * erratum i531. */ val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) { @@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) return; } + /* + * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around + * erratum i531 "Extra Power Consumed When Repeated Start Operation + * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)". + * Otherwise I2C4 eventually leads into about 23mW extra power being + * consumed even during off idle using VMODE. + */ i2c_high_speed = voltdm->pmic->i2c_high_speed; if (i2c_high_speed) - voltdm->rmw(vc->common->i2c_cfg_hsen_mask, + voltdm->rmw(vc->common->i2c_cfg_clear_mask, vc->common->i2c_cfg_hsen_mask, vc->common->i2c_cfg_reg); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index cdbdd78e755e..89b83b7ff3ec 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -34,6 +34,7 @@ struct voltagedomain; * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register * @i2c_cfg_reg: I2C configuration register offset + * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register * @i2c_mcode_mask: MCODE field mask for I2C config register * @@ -52,6 +53,7 @@ struct omap_vc_common { u8 cmd_ret_shift; u8 cmd_off_shift; u8 i2c_cfg_reg; + u8 i2c_cfg_clear_mask; u8 i2c_cfg_hsen_mask; u8 i2c_mcode_mask; }; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 75bc4aa22b3a..71d74c9172c1 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = { .cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT, .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, + .i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK, .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK, .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET, .i2c_mcode_mask = OMAP3430_MCODE_MASK, diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 085e5d6a04fd..2abd5fa8a697 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = { .cmd_ret_shift = OMAP4430_RET_SHIFT, .cmd_off_shift = OMAP4430_OFF_SHIFT, .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET, + .i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK, .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK, .i2c_mcode_mask = OMAP4430_HSMCODE_MASK, }; From 40cdc7a530c7a075557651a071354bb42b99df08 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 27 Apr 2015 14:50:13 +0200 Subject: [PATCH 203/652] nfsd/blocklayout: pretend we can send deviceid notifications Commit df52699e4fcef ("NFSv4.1: Don't cache deviceids that have no notifications") causes the Linux NFS client to stop caching deviceid's unless a server pretends to support deviceid notifications. While this behavior is stupid and the language around this area in rfc5661 is a mess carified by an errata that I submittted, Trond insists on this behavior. Not caching deviceids degrades block layout performance massively as a GETDEVICEINFO is fairly expensive. So add this hack to make the Linux client happy again. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields --- fs/nfsd/blocklayout.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 03d647bf195d..cdefaa331a07 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -181,6 +181,17 @@ nfsd4_block_proc_layoutcommit(struct inode *inode, } const struct nfsd4_layout_ops bl_layout_ops = { + /* + * Pretend that we send notification to the client. This is a blatant + * lie to force recent Linux clients to cache our device IDs. + * We rarely ever change the device ID, so the harm of leaking deviceids + * for a while isn't too bad. Unfortunately RFC5661 is a complete mess + * in this regard, but I filed errata 4119 for this a while ago, and + * hopefully the Linux client will eventually start caching deviceids + * without this again. + */ + .notify_types = + NOTIFY_DEVICEID4_DELETE | NOTIFY_DEVICEID4_CHANGE, .proc_getdeviceinfo = nfsd4_block_proc_getdeviceinfo, .encode_getdeviceinfo = nfsd4_block_encode_getdeviceinfo, .proc_layoutget = nfsd4_block_proc_layoutget, From ebe9cb3bb13e7b9b281969cd279ce70834f7500f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 28 Apr 2015 15:41:15 +0200 Subject: [PATCH 204/652] nfsd: fix the check for confirmed openowner in nfs4_preprocess_stateid_op If we find a non-confirmed openowner we jump to exit the function, but do not set an error value. Fix this by factoring out a helper to do the check and properly set the error from nfsd4_validate_stateid. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 38f2d7abe3a7..fb8c66725035 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -4385,10 +4385,17 @@ static __be32 check_stateid_generation(stateid_t *in, stateid_t *ref, bool has_s return nfserr_old_stateid; } +static __be32 nfsd4_check_openowner_confirmed(struct nfs4_ol_stateid *ols) +{ + if (ols->st_stateowner->so_is_open_owner && + !(openowner(ols->st_stateowner)->oo_flags & NFS4_OO_CONFIRMED)) + return nfserr_bad_stateid; + return nfs_ok; +} + static __be32 nfsd4_validate_stateid(struct nfs4_client *cl, stateid_t *stateid) { struct nfs4_stid *s; - struct nfs4_ol_stateid *ols; __be32 status = nfserr_bad_stateid; if (ZERO_STATEID(stateid) || ONE_STATEID(stateid)) @@ -4418,13 +4425,7 @@ static __be32 nfsd4_validate_stateid(struct nfs4_client *cl, stateid_t *stateid) break; case NFS4_OPEN_STID: case NFS4_LOCK_STID: - ols = openlockstateid(s); - if (ols->st_stateowner->so_is_open_owner - && !(openowner(ols->st_stateowner)->oo_flags - & NFS4_OO_CONFIRMED)) - status = nfserr_bad_stateid; - else - status = nfs_ok; + status = nfsd4_check_openowner_confirmed(openlockstateid(s)); break; default: printk("unknown stateid type %x\n", s->sc_type); @@ -4516,8 +4517,8 @@ nfs4_preprocess_stateid_op(struct net *net, struct nfsd4_compound_state *cstate, status = nfs4_check_fh(current_fh, stp); if (status) goto out; - if (stp->st_stateowner->so_is_open_owner - && !(openowner(stp->st_stateowner)->oo_flags & NFS4_OO_CONFIRMED)) + status = nfsd4_check_openowner_confirmed(stp); + if (status) goto out; status = nfs4_check_openmode(stp, flags); if (status) From 8287f009bd95a5e548059dba62a67727bb9549cd Mon Sep 17 00:00:00 2001 From: Sachin Bhamare Date: Mon, 27 Apr 2015 14:50:14 +0200 Subject: [PATCH 205/652] nfsd: fix pNFS return on close semantics For the sake of forgetful clients, the server should return the layouts to the file system on 'last close' of a file (assuming that there are no delegations outstanding to that particular client) or on delegreturn (assuming that there are no opens on a file from that particular client). In theory the information is all there in current data structures, but it's not efficiently available; nfs4_file->fi_ref includes references on the file across all clients, but we need a per-(client, file) count. Walking through lots of stateid's to calculate this on each close or delegreturn would be painful. This patch introduces infrastructure to maintain per-client opens and delegation counters on a per-file basis. [hch: ported to the mainline pNFS support, merged various fixes from Jeff] Signed-off-by: Sachin Bhamare Signed-off-by: Jeff Layton Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 125 +++++++++++++++++++++++++++++++++++++++++--- fs/nfsd/state.h | 14 +++++ fs/nfsd/xdr4.h | 1 + 3 files changed, 133 insertions(+), 7 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index fb8c66725035..66067a291267 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -94,6 +94,7 @@ static struct kmem_cache *lockowner_slab; static struct kmem_cache *file_slab; static struct kmem_cache *stateid_slab; static struct kmem_cache *deleg_slab; +static struct kmem_cache *odstate_slab; static void free_session(struct nfsd4_session *); @@ -281,6 +282,7 @@ put_nfs4_file(struct nfs4_file *fi) if (atomic_dec_and_lock(&fi->fi_ref, &state_lock)) { hlist_del_rcu(&fi->fi_hash); spin_unlock(&state_lock); + WARN_ON_ONCE(!list_empty(&fi->fi_clnt_odstate)); WARN_ON_ONCE(!list_empty(&fi->fi_delegations)); call_rcu(&fi->fi_rcu, nfsd4_free_file_rcu); } @@ -471,6 +473,86 @@ static void nfs4_file_put_access(struct nfs4_file *fp, u32 access) __nfs4_file_put_access(fp, O_RDONLY); } +/* + * Allocate a new open/delegation state counter. This is needed for + * pNFS for proper return on close semantics. + * + * Note that we only allocate it for pNFS-enabled exports, otherwise + * all pointers to struct nfs4_clnt_odstate are always NULL. + */ +static struct nfs4_clnt_odstate * +alloc_clnt_odstate(struct nfs4_client *clp) +{ + struct nfs4_clnt_odstate *co; + + co = kmem_cache_zalloc(odstate_slab, GFP_KERNEL); + if (co) { + co->co_client = clp; + atomic_set(&co->co_odcount, 1); + } + return co; +} + +static void +hash_clnt_odstate_locked(struct nfs4_clnt_odstate *co) +{ + struct nfs4_file *fp = co->co_file; + + lockdep_assert_held(&fp->fi_lock); + list_add(&co->co_perfile, &fp->fi_clnt_odstate); +} + +static inline void +get_clnt_odstate(struct nfs4_clnt_odstate *co) +{ + if (co) + atomic_inc(&co->co_odcount); +} + +static void +put_clnt_odstate(struct nfs4_clnt_odstate *co) +{ + struct nfs4_file *fp; + + if (!co) + return; + + fp = co->co_file; + if (atomic_dec_and_lock(&co->co_odcount, &fp->fi_lock)) { + list_del(&co->co_perfile); + spin_unlock(&fp->fi_lock); + + nfsd4_return_all_file_layouts(co->co_client, fp); + kmem_cache_free(odstate_slab, co); + } +} + +static struct nfs4_clnt_odstate * +find_or_hash_clnt_odstate(struct nfs4_file *fp, struct nfs4_clnt_odstate *new) +{ + struct nfs4_clnt_odstate *co; + struct nfs4_client *cl; + + if (!new) + return NULL; + + cl = new->co_client; + + spin_lock(&fp->fi_lock); + list_for_each_entry(co, &fp->fi_clnt_odstate, co_perfile) { + if (co->co_client == cl) { + get_clnt_odstate(co); + goto out; + } + } + co = new; + co->co_file = fp; + hash_clnt_odstate_locked(new); +out: + spin_unlock(&fp->fi_lock); + return co; +} + struct nfs4_stid *nfs4_alloc_stid(struct nfs4_client *cl, struct kmem_cache *slab) { @@ -606,7 +688,8 @@ static void block_delegations(struct knfsd_fh *fh) } static struct nfs4_delegation * -alloc_init_deleg(struct nfs4_client *clp, struct svc_fh *current_fh) +alloc_init_deleg(struct nfs4_client *clp, struct svc_fh *current_fh, + struct nfs4_clnt_odstate *odstate) { struct nfs4_delegation *dp; long n; @@ -631,6 +714,8 @@ alloc_init_deleg(struct nfs4_client *clp, struct svc_fh *current_fh) INIT_LIST_HEAD(&dp->dl_perfile); INIT_LIST_HEAD(&dp->dl_perclnt); INIT_LIST_HEAD(&dp->dl_recall_lru); + dp->dl_clnt_odstate = odstate; + get_clnt_odstate(odstate); dp->dl_type = NFS4_OPEN_DELEGATE_READ; dp->dl_retries = 1; nfsd4_init_cb(&dp->dl_recall, dp->dl_stid.sc_client, @@ -714,6 +799,7 @@ static void destroy_delegation(struct nfs4_delegation *dp) spin_lock(&state_lock); unhash_delegation_locked(dp); spin_unlock(&state_lock); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); nfs4_put_stid(&dp->dl_stid); } @@ -724,6 +810,7 @@ static void revoke_delegation(struct nfs4_delegation *dp) WARN_ON(!list_empty(&dp->dl_recall_lru)); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); if (clp->cl_minorversion == 0) @@ -933,6 +1020,7 @@ static void nfs4_free_ol_stateid(struct nfs4_stid *stid) { struct nfs4_ol_stateid *stp = openlockstateid(stid); + put_clnt_odstate(stp->st_clnt_odstate); release_all_access(stp); if (stp->st_stateowner) nfs4_put_stateowner(stp->st_stateowner); @@ -1634,6 +1722,7 @@ __destroy_client(struct nfs4_client *clp) while (!list_empty(&reaplist)) { dp = list_entry(reaplist.next, struct nfs4_delegation, dl_recall_lru); list_del_init(&dp->dl_recall_lru); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); nfs4_put_stid(&dp->dl_stid); } @@ -3057,6 +3146,7 @@ static void nfsd4_init_file(struct knfsd_fh *fh, unsigned int hashval, spin_lock_init(&fp->fi_lock); INIT_LIST_HEAD(&fp->fi_stateids); INIT_LIST_HEAD(&fp->fi_delegations); + INIT_LIST_HEAD(&fp->fi_clnt_odstate); fh_copy_shallow(&fp->fi_fhandle, fh); fp->fi_deleg_file = NULL; fp->fi_had_conflict = false; @@ -3073,6 +3163,7 @@ static void nfsd4_init_file(struct knfsd_fh *fh, unsigned int hashval, void nfsd4_free_slabs(void) { + kmem_cache_destroy(odstate_slab); kmem_cache_destroy(openowner_slab); kmem_cache_destroy(lockowner_slab); kmem_cache_destroy(file_slab); @@ -3103,8 +3194,14 @@ nfsd4_init_slabs(void) sizeof(struct nfs4_delegation), 0, 0, NULL); if (deleg_slab == NULL) goto out_free_stateid_slab; + odstate_slab = kmem_cache_create("nfsd4_odstate", + sizeof(struct nfs4_clnt_odstate), 0, 0, NULL); + if (odstate_slab == NULL) + goto out_free_deleg_slab; return 0; +out_free_deleg_slab: + kmem_cache_destroy(deleg_slab); out_free_stateid_slab: kmem_cache_destroy(stateid_slab); out_free_file_slab: @@ -3581,6 +3678,14 @@ alloc_stateid: open->op_stp = nfs4_alloc_open_stateid(clp); if (!open->op_stp) return nfserr_jukebox; + + if (nfsd4_has_session(cstate) && + (cstate->current_fh.fh_export->ex_flags & NFSEXP_PNFS)) { + open->op_odstate = alloc_clnt_odstate(clp); + if (!open->op_odstate) + return nfserr_jukebox; + } + return nfs_ok; } @@ -3869,7 +3974,7 @@ out_fput: static struct nfs4_delegation * nfs4_set_delegation(struct nfs4_client *clp, struct svc_fh *fh, - struct nfs4_file *fp) + struct nfs4_file *fp, struct nfs4_clnt_odstate *odstate) { int status; struct nfs4_delegation *dp; @@ -3877,7 +3982,7 @@ nfs4_set_delegation(struct nfs4_client *clp, struct svc_fh *fh, if (fp->fi_had_conflict) return ERR_PTR(-EAGAIN); - dp = alloc_init_deleg(clp, fh); + dp = alloc_init_deleg(clp, fh, odstate); if (!dp) return ERR_PTR(-ENOMEM); @@ -3903,6 +4008,7 @@ out_unlock: spin_unlock(&state_lock); out: if (status) { + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_stid(&dp->dl_stid); return ERR_PTR(status); } @@ -3980,7 +4086,7 @@ nfs4_open_delegation(struct svc_fh *fh, struct nfsd4_open *open, default: goto out_no_deleg; } - dp = nfs4_set_delegation(clp, fh, stp->st_stid.sc_file); + dp = nfs4_set_delegation(clp, fh, stp->st_stid.sc_file, stp->st_clnt_odstate); if (IS_ERR(dp)) goto out_no_deleg; @@ -4069,6 +4175,11 @@ nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nf release_open_stateid(stp); goto out; } + + stp->st_clnt_odstate = find_or_hash_clnt_odstate(fp, + open->op_odstate); + if (stp->st_clnt_odstate == open->op_odstate) + open->op_odstate = NULL; } update_stateid(&stp->st_stid.sc_stateid); memcpy(&open->op_stateid, &stp->st_stid.sc_stateid, sizeof(stateid_t)); @@ -4129,6 +4240,8 @@ void nfsd4_cleanup_open_state(struct nfsd4_compound_state *cstate, kmem_cache_free(file_slab, open->op_file); if (open->op_stp) nfs4_put_stid(&open->op_stp->st_stid); + if (open->op_odstate) + kmem_cache_free(odstate_slab, open->op_odstate); } __be32 @@ -4853,9 +4966,6 @@ nfsd4_close(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, update_stateid(&stp->st_stid.sc_stateid); memcpy(&close->cl_stateid, &stp->st_stid.sc_stateid, sizeof(stateid_t)); - nfsd4_return_all_file_layouts(stp->st_stateowner->so_client, - stp->st_stid.sc_file); - nfsd4_close_open_stateid(stp); /* put reference from nfs4_preprocess_seqid_op */ @@ -6489,6 +6599,7 @@ nfs4_state_shutdown_net(struct net *net) list_for_each_safe(pos, next, &reaplist) { dp = list_entry (pos, struct nfs4_delegation, dl_recall_lru); list_del_init(&dp->dl_recall_lru); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); nfs4_put_stid(&dp->dl_stid); } diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index 4f3bfeb11766..bde45d90b746 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -126,6 +126,7 @@ struct nfs4_delegation { struct list_head dl_perfile; struct list_head dl_perclnt; struct list_head dl_recall_lru; /* delegation recalled */ + struct nfs4_clnt_odstate *dl_clnt_odstate; u32 dl_type; time_t dl_time; /* For recall: */ @@ -464,6 +465,17 @@ static inline struct nfs4_lockowner * lockowner(struct nfs4_stateowner *so) return container_of(so, struct nfs4_lockowner, lo_owner); } +/* + * Per-client state indicating no. of opens and outstanding delegations + * on a file from a particular client.'od' stands for 'open & delegation' + */ +struct nfs4_clnt_odstate { + struct nfs4_client *co_client; + struct nfs4_file *co_file; + struct list_head co_perfile; + atomic_t co_odcount; +}; + /* * nfs4_file: a file opened by some number of (open) nfs4_stateowners. * @@ -485,6 +497,7 @@ struct nfs4_file { struct list_head fi_delegations; struct rcu_head fi_rcu; }; + struct list_head fi_clnt_odstate; /* One each for O_RDONLY, O_WRONLY, O_RDWR: */ struct file * fi_fds[3]; /* @@ -526,6 +539,7 @@ struct nfs4_ol_stateid { struct list_head st_perstateowner; struct list_head st_locks; struct nfs4_stateowner * st_stateowner; + struct nfs4_clnt_odstate * st_clnt_odstate; unsigned char st_access_bmap; unsigned char st_deny_bmap; struct nfs4_ol_stateid * st_openstp; diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h index f982ae84f0cd..2f8c092be2b3 100644 --- a/fs/nfsd/xdr4.h +++ b/fs/nfsd/xdr4.h @@ -247,6 +247,7 @@ struct nfsd4_open { struct nfs4_openowner *op_openowner; /* used during processing */ struct nfs4_file *op_file; /* used during processing */ struct nfs4_ol_stateid *op_stp; /* used during processing */ + struct nfs4_clnt_odstate *op_odstate; /* used during processing */ struct nfs4_acl *op_acl; struct xdr_netobj op_label; }; From 9507271d960a1911a51683888837d75c171cd91f Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Tue, 28 Apr 2015 16:29:53 -0400 Subject: [PATCH 206/652] svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by: Scott Mayhew Cc: stable@vger.kernel.org Reviewed-by: Simo Sorce Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/gss_rpc_xdr.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/net/sunrpc/auth_gss/gss_rpc_xdr.c b/net/sunrpc/auth_gss/gss_rpc_xdr.c index 1ec19f6f0c2b..eeeba5adee6d 100644 --- a/net/sunrpc/auth_gss/gss_rpc_xdr.c +++ b/net/sunrpc/auth_gss/gss_rpc_xdr.c @@ -793,20 +793,26 @@ int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp, { u32 value_follows; int err; + struct page *scratch; + + scratch = alloc_page(GFP_KERNEL); + if (!scratch) + return -ENOMEM; + xdr_set_scratch_buffer(xdr, page_address(scratch), PAGE_SIZE); /* res->status */ err = gssx_dec_status(xdr, &res->status); if (err) - return err; + goto out_free; /* res->context_handle */ err = gssx_dec_bool(xdr, &value_follows); if (err) - return err; + goto out_free; if (value_follows) { err = gssx_dec_ctx(xdr, res->context_handle); if (err) - return err; + goto out_free; } else { res->context_handle = NULL; } @@ -814,11 +820,11 @@ int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp, /* res->output_token */ err = gssx_dec_bool(xdr, &value_follows); if (err) - return err; + goto out_free; if (value_follows) { err = gssx_dec_buffer(xdr, res->output_token); if (err) - return err; + goto out_free; } else { res->output_token = NULL; } @@ -826,14 +832,17 @@ int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp, /* res->delegated_cred_handle */ err = gssx_dec_bool(xdr, &value_follows); if (err) - return err; + goto out_free; if (value_follows) { /* we do not support upcall servers sending this data. */ - return -EINVAL; + err = -EINVAL; + goto out_free; } /* res->options */ err = gssx_dec_option_array(xdr, &res->options); +out_free: + __free_page(scratch); return err; } From ef2a1b3e1067195f1d6b89d8329454775c87f033 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 30 Apr 2015 11:49:23 +0200 Subject: [PATCH 207/652] nfsd: split transport vs operation errors for callbacks We must only increment the sequence id if the client has seen and responded to a request. If we failed to deliver it to the client we must resend with the same sequence id. So just like the client track errors at the transport level differently from those returned in the XDR. Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4callback.c | 60 +++++++++++++++++------------------------- fs/nfsd/state.h | 1 + 2 files changed, 25 insertions(+), 36 deletions(-) diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index 58277859a467..cd58b7cd3f1a 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -224,7 +224,7 @@ static int nfs_cb_stat_to_errno(int status) } static int decode_cb_op_status(struct xdr_stream *xdr, enum nfs_opnum4 expected, - enum nfsstat4 *status) + int *status) { __be32 *p; u32 op; @@ -235,7 +235,7 @@ static int decode_cb_op_status(struct xdr_stream *xdr, enum nfs_opnum4 expected, op = be32_to_cpup(p++); if (unlikely(op != expected)) goto out_unexpected; - *status = be32_to_cpup(p); + *status = nfs_cb_stat_to_errno(be32_to_cpup(p)); return 0; out_overflow: print_overflow_msg(__func__, xdr); @@ -446,22 +446,16 @@ out_overflow: static int decode_cb_sequence4res(struct xdr_stream *xdr, struct nfsd4_callback *cb) { - enum nfsstat4 nfserr; int status; if (cb->cb_minorversion == 0) return 0; - status = decode_cb_op_status(xdr, OP_CB_SEQUENCE, &nfserr); - if (unlikely(status)) - goto out; - if (unlikely(nfserr != NFS4_OK)) - goto out_default; - status = decode_cb_sequence4resok(xdr, cb); -out: - return status; -out_default: - return nfs_cb_stat_to_errno(nfserr); + status = decode_cb_op_status(xdr, OP_CB_SEQUENCE, &cb->cb_status); + if (unlikely(status || cb->cb_status)) + return status; + + return decode_cb_sequence4resok(xdr, cb); } /* @@ -524,26 +518,19 @@ static int nfs4_xdr_dec_cb_recall(struct rpc_rqst *rqstp, struct nfsd4_callback *cb) { struct nfs4_cb_compound_hdr hdr; - enum nfsstat4 nfserr; int status; status = decode_cb_compound4res(xdr, &hdr); if (unlikely(status)) - goto out; + return status; if (cb != NULL) { status = decode_cb_sequence4res(xdr, cb); - if (unlikely(status)) - goto out; + if (unlikely(status || cb->cb_status)) + return status; } - status = decode_cb_op_status(xdr, OP_CB_RECALL, &nfserr); - if (unlikely(status)) - goto out; - if (unlikely(nfserr != NFS4_OK)) - status = nfs_cb_stat_to_errno(nfserr); -out: - return status; + return decode_cb_op_status(xdr, OP_CB_RECALL, &cb->cb_status); } #ifdef CONFIG_NFSD_PNFS @@ -621,24 +608,18 @@ static int nfs4_xdr_dec_cb_layout(struct rpc_rqst *rqstp, struct nfsd4_callback *cb) { struct nfs4_cb_compound_hdr hdr; - enum nfsstat4 nfserr; int status; status = decode_cb_compound4res(xdr, &hdr); if (unlikely(status)) - goto out; + return status; + if (cb) { status = decode_cb_sequence4res(xdr, cb); - if (unlikely(status)) - goto out; + if (unlikely(status || cb->cb_status)) + return status; } - status = decode_cb_op_status(xdr, OP_CB_LAYOUTRECALL, &nfserr); - if (unlikely(status)) - goto out; - if (unlikely(nfserr != NFS4_OK)) - status = nfs_cb_stat_to_errno(nfserr); -out: - return status; + return decode_cb_op_status(xdr, OP_CB_LAYOUTRECALL, &cb->cb_status); } #endif /* CONFIG_NFSD_PNFS */ @@ -918,7 +899,8 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) if (clp->cl_minorversion) { /* No need for lock, access serialized in nfsd4_cb_prepare */ - ++clp->cl_cb_session->se_cb_seq_nr; + if (!task->tk_status) + ++clp->cl_cb_session->se_cb_seq_nr; clear_bit(0, &clp->cl_cb_slot_busy); rpc_wake_up_next(&clp->cl_cb_waitq); dprintk("%s: freed slot, new seqid=%d\n", __func__, @@ -935,6 +917,11 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) if (cb->cb_done) return; + if (cb->cb_status) { + WARN_ON_ONCE(task->tk_status); + task->tk_status = cb->cb_status; + } + switch (cb->cb_ops->done(cb, task)) { case 0: task->tk_status = 0; @@ -1099,6 +1086,7 @@ void nfsd4_init_cb(struct nfsd4_callback *cb, struct nfs4_client *clp, cb->cb_ops = ops; INIT_WORK(&cb->cb_work, nfsd4_run_cb_work); INIT_LIST_HEAD(&cb->cb_per_client); + cb->cb_status = 0; cb->cb_done = true; } diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index bde45d90b746..e791985a7318 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -68,6 +68,7 @@ struct nfsd4_callback { struct rpc_message cb_msg; struct nfsd4_callback_ops *cb_ops; struct work_struct cb_work; + int cb_status; bool cb_done; }; From cba5f62b1830c1919b47544789bc993e6e617dc6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 30 Apr 2015 11:49:24 +0200 Subject: [PATCH 208/652] nfsd: fix callback restarts Checking the rpc_client pointer is not a reliable way to detect backchannel changes: cl_cb_client is changed only after shutting down the rpc client, so the condition cl_cb_client = tk_client will always be true. Check the RPC_TASK_KILLED flag instead, and rewrite the code to avoid the buggy cl_callbacks list and fix the lifetime rules due to double calls of the ->prepare callback operations method for this retry case. Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4callback.c | 52 +++++++++++++++++++----------------------- fs/nfsd/nfs4state.c | 1 - fs/nfsd/state.h | 4 +--- 3 files changed, 24 insertions(+), 33 deletions(-) diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index cd58b7cd3f1a..4c993aaf1e6e 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -879,13 +879,6 @@ static void nfsd4_cb_prepare(struct rpc_task *task, void *calldata) if (!nfsd41_cb_get_slot(clp, task)) return; } - spin_lock(&clp->cl_lock); - if (list_empty(&cb->cb_per_client)) { - /* This is the first call, not a restart */ - cb->cb_done = false; - list_add(&cb->cb_per_client, &clp->cl_callbacks); - } - spin_unlock(&clp->cl_lock); rpc_call_start(task); } @@ -907,16 +900,21 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) clp->cl_cb_session->se_cb_seq_nr); } - if (clp->cl_cb_client != task->tk_client) { - /* We're shutting down or changing cl_cb_client; leave - * it to nfsd4_process_cb_update to restart the call if - * necessary. */ + /* + * If the backchannel connection was shut down while this + * task was queued, we need to resubmit it after setting up + * a new backchannel connection. + * + * Note that if we lost our callback connection permanently + * the submission code will error out, so we don't need to + * handle that case here. + */ + if (task->tk_flags & RPC_TASK_KILLED) { + task->tk_status = 0; + cb->cb_need_restart = true; return; } - if (cb->cb_done) - return; - if (cb->cb_status) { WARN_ON_ONCE(task->tk_status); task->tk_status = cb->cb_status; @@ -936,21 +934,17 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) default: BUG(); } - cb->cb_done = true; } static void nfsd4_cb_release(void *calldata) { struct nfsd4_callback *cb = calldata; - struct nfs4_client *clp = cb->cb_clp; - - if (cb->cb_done) { - spin_lock(&clp->cl_lock); - list_del(&cb->cb_per_client); - spin_unlock(&clp->cl_lock); + if (cb->cb_need_restart) + nfsd4_run_cb(cb); + else cb->cb_ops->release(cb); - } + } static const struct rpc_call_ops nfsd4_cb_ops = { @@ -1045,9 +1039,6 @@ static void nfsd4_process_cb_update(struct nfsd4_callback *cb) nfsd4_mark_cb_down(clp, err); return; } - /* Yay, the callback channel's back! Restart any callbacks: */ - list_for_each_entry(cb, &clp->cl_callbacks, cb_per_client) - queue_work(callback_wq, &cb->cb_work); } static void @@ -1058,8 +1049,12 @@ nfsd4_run_cb_work(struct work_struct *work) struct nfs4_client *clp = cb->cb_clp; struct rpc_clnt *clnt; - if (cb->cb_ops && cb->cb_ops->prepare) - cb->cb_ops->prepare(cb); + if (cb->cb_need_restart) { + cb->cb_need_restart = false; + } else { + if (cb->cb_ops && cb->cb_ops->prepare) + cb->cb_ops->prepare(cb); + } if (clp->cl_flags & NFSD4_CLIENT_CB_FLAG_MASK) nfsd4_process_cb_update(cb); @@ -1085,9 +1080,8 @@ void nfsd4_init_cb(struct nfsd4_callback *cb, struct nfs4_client *clp, cb->cb_msg.rpc_resp = cb; cb->cb_ops = ops; INIT_WORK(&cb->cb_work, nfsd4_run_cb_work); - INIT_LIST_HEAD(&cb->cb_per_client); cb->cb_status = 0; - cb->cb_done = true; + cb->cb_need_restart = false; } void nfsd4_run_cb(struct nfsd4_callback *cb) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 66067a291267..039f9c8a95e8 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1626,7 +1626,6 @@ static struct nfs4_client *alloc_client(struct xdr_netobj name) INIT_LIST_HEAD(&clp->cl_openowners); INIT_LIST_HEAD(&clp->cl_delegations); INIT_LIST_HEAD(&clp->cl_lru); - INIT_LIST_HEAD(&clp->cl_callbacks); INIT_LIST_HEAD(&clp->cl_revoked); #ifdef CONFIG_NFSD_PNFS INIT_LIST_HEAD(&clp->cl_lo_states); diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index e791985a7318..dbc4f85a5008 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -63,13 +63,12 @@ typedef struct { struct nfsd4_callback { struct nfs4_client *cb_clp; - struct list_head cb_per_client; u32 cb_minorversion; struct rpc_message cb_msg; struct nfsd4_callback_ops *cb_ops; struct work_struct cb_work; int cb_status; - bool cb_done; + bool cb_need_restart; }; struct nfsd4_callback_ops { @@ -334,7 +333,6 @@ struct nfs4_client { int cl_cb_state; struct nfsd4_callback cl_cb_null; struct nfsd4_session *cl_cb_session; - struct list_head cl_callbacks; /* list of in-progress callbacks */ /* for all client information that callback code might need: */ spinlock_t cl_lock; From 4bd9e9b77fc6787c45b8bb439f6511aa3478606c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 30 Apr 2015 11:49:25 +0200 Subject: [PATCH 209/652] nfsd: skip CB_NULL probes for 4.1 or later With sessions in v4.1 or later we don't need to manually probe the backchannel connection, so we can declare it up instantly after setting up the RPC client. Note that we really should split nfsd4_run_cb_work in the long run, this is just the least intrusive fix for now. Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4callback.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index 4c993aaf1e6e..5694cfb7a47b 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -1066,6 +1066,15 @@ nfsd4_run_cb_work(struct work_struct *work) cb->cb_ops->release(cb); return; } + + /* + * Don't send probe messages for 4.1 or later. + */ + if (!cb->cb_ops && clp->cl_minorversion) { + clp->cl_cb_state = NFSD4_CB_UP; + return; + } + cb->cb_msg.rpc_cred = clp->cl_cb_cred; rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | RPC_TASK_SOFTCONN, cb->cb_ops ? &nfsd4_cb_ops : &nfsd4_cb_probe_ops, cb); From 1819e3034ee26ffadc71880064ed8b8e7d74f52c Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sun, 1 Mar 2015 21:07:08 +0200 Subject: [PATCH 210/652] ARM: dts: OMAP3-N900: Add microphone bias voltages N900 audio recording needs that codec provides bias voltage for integrated digital microphone and headset microphone depending which one is used. Digital microphone uses 2 V bias and it comes from the codec A part. Codec B part drives the headset microphone bias and that is set to 2.5 V. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Pavel Machek [Jarkko: Headset mic bias changed to 2 (2.5 V) as it was before commit e2e8bfdf6157 ("ASoC: tlv320aic3x: Convert mic bias to a supply widget")] Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index a29315833ecd..5c16145920ea 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -498,6 +498,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <1>; }; tlv320aic3x_aux: tlv320aic3x@19 { @@ -509,6 +511,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <2>; }; tsl2563: tsl2563@29 { From 67defd5c0ee5270948104784c8fc8f6d4a99682b Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 24 Mar 2015 12:19:19 +0200 Subject: [PATCH 211/652] ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO We need to enable EXTCON_USB_GPIO_USB and not EXTCON_GPIO_USB. Fixes: c08a54c0ebeb ("ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB") Reported-by: Nishant Menon Signed-off-by: Roger Quadros Acked-by-by: Nishanth Menon Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9ff7b54b2a83..3743ca221d40 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXTCON=m -CONFIG_EXTCON_GPIO=m +CONFIG_EXTCON_USB_GPIO=m CONFIG_EXTCON_PALMAS=m CONFIG_TI_EMIF=m CONFIG_PWM=y From 2055088b5e17b450fcfb536568aee00eccd0ced5 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 31 Mar 2015 03:28:10 +0200 Subject: [PATCH 212/652] ARM: dts: omap3: Add #iommu-cells to isp and iva iommu Add missing #iommu-cells property to the isp and iva iommu nodes. This fixes the binding (property is required according to the generic iommu binding) and removes the following kernel warning triggered once the iommu nodes are referenced: [ 0.647521] /ocp/isp@480bc000: could not get #iommu-cells for /ocp/mmu@480bd400 Signed-off-by: Sebastian Reichel Cc: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index d18a90f5eca3..69a40cfc1f29 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -456,6 +456,7 @@ }; mmu_isp: mmu@480bd400 { + #iommu-cells = <0>; compatible = "ti,omap2-iommu"; reg = <0x480bd400 0x80>; interrupts = <24>; @@ -464,6 +465,7 @@ }; mmu_iva: mmu@5d000000 { + #iommu-cells = <0>; compatible = "ti,omap2-iommu"; reg = <0x5d000000 0x80>; interrupts = <28>; From e7a7357341664148cabf98a3ab50b5d449afca0b Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 8 Apr 2015 18:56:26 -0500 Subject: [PATCH 213/652] ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x The interrupt polarity provided in devicetree is used to configure the interrupt controller(ARM GIC), however, it seems that we have an inverter at the GIC boundary inside AM57xx which inverts the signal input from sys_irq external interrupt source. Further, as per GIC distributor TRM, http://infocenter.arm.com/help/topic/com.arm.doc.ddi0438d/BGBHIACJ.html#BABJFCFB ARM GIC distributor does not support IRQ trigger type IRQ_TYPE_LEVEL_LOW, and only rising or level high signals. However, for some reason, the current configuration(which gets ignored by GIC driver) functions on some platforms, however, on few platforms results in infinite interrupts hogging the system down. Switch over to rising edge for GIC configuration which is also aligned with trigger point from the RTC chip and the internal inversion. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by: Grygorii Strashko Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 15f198e4864d..7ac6ee2c52d8 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -455,7 +455,7 @@ mcp_rtc: rtc@6f { compatible = "microchip,mcp7941x"; reg = <0x6f>; - interrupts = ; /* IRQ_SYS_1N */ + interrupts = ; /* IRQ_SYS_1N */ pinctrl-names = "default"; pinctrl-0 = <&mcp79410_pins_default>; From 00edd3170c757772f74c533e61298be249447a11 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 8 Apr 2015 18:56:27 -0500 Subject: [PATCH 214/652] ARM: dts: am57xx-beagle-x15: Fix RTC aliases With commit bc078316d86c ("ARM: dts: DRA7: Add node for RTC"), we now have AM57xx RTC register itself as alias 0 even before DS1307 or TPS rtc drivers are loaded up. However, since neither TPS, nor AM57xx RTC are capable of being backedup by battery, we would like to maintain the "primary" rtc as mcp79410 rtc device. This also generates the following warnings in the bootlog highlighting the issue: [ 5.895445] rtc-ds1307 2-006f: /aliases ID 0 not available ... [ 6.476285] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: /aliases ID 1 not available So, add proper aliases to ensure that RTC order is always consistent to userspace immaterial of probe order. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + arch/arm/boot/dts/dra7.dtsi | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 7ac6ee2c52d8..be9b6a552ae2 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -18,6 +18,7 @@ aliases { rtc0 = &mcp_rtc; rtc1 = &tps659038_rtc; + rtc2 = &rtc; }; memory { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5332b57b4950..0f73fea9f5c3 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1203,7 +1203,7 @@ status = "disabled"; }; - rtc@48838000 { + rtc: rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; interrupts = , From faa4ec1eedbe6d352dc22c945540a64b5c896a95 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 9 Apr 2015 10:59:26 -0500 Subject: [PATCH 215/652] ARM: dts: am437x-sk: fix for new newhaven display module revision AM437x Starter Kit uses a NewHaven Display module with a 4.3" display and EDT FT5306 touchscreen On that module's new revision, NewHave decided to change the pinout on the 6 pin flat-pcb touchscreen connector so that instead of having WAKE pin, we now have RESETn. The new display module is available on AM437x SK Beta and all new revisions while the older revision is only available on AM437x SK Alpha which, unfortunately, can't be supported anymore in mainline without a revert of this patch. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-sk-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 8ae29c955c11..fbc50f92e622 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -473,7 +473,7 @@ interrupt-parent = <&gpio0>; interrupts = <31 0>; - wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; touchscreen-size-x = <480>; touchscreen-size-y = <272>; From f6b957fdce50ddbd1899948ab109cca64e571eba Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 9 Apr 2015 10:59:27 -0500 Subject: [PATCH 216/652] ARM: dts: am437x-sk: reduce col-scan-delay-us The new AM437x SK Beta boards have removed the large capacitors on the gpio-matrix column lines which means we can reduce col-scan-delay-us to 5us without loosing functionality. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-sk-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index fbc50f92e622..c17097d2c167 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -49,7 +49,7 @@ pinctrl-0 = <&matrix_keypad_pins>; debounce-delay-ms = <5>; - col-scan-delay-us = <1500>; + col-scan-delay-us = <5>; row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ From 5eb6719816faad8e915d4f46ad61a440d641d183 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 8 Apr 2015 17:40:59 -0500 Subject: [PATCH 217/652] ARM: dts: am57xx-beagle-x15: Switch UART mux pins BeagleBoard-X15 pre-production change includes switching over to UART pins that now allow for UART download capability. All original boards should either have been returned for modifications or already modified for the required change and maintaining compatibility for older boards are no longer needed. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index be9b6a552ae2..dd53ea56b0ed 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -131,8 +131,8 @@ uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ - 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ + 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ + 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ >; }; @@ -479,7 +479,7 @@ &uart3 { status = "okay"; interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x248>; + <&dra7_pmx_core 0x3f8>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins_default>; From ed12f102ba9f55d2617fc6b5e4fbecbf9a132ba7 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 9 Apr 2015 17:33:17 -0500 Subject: [PATCH 218/652] ARM: dts: am57xx-beagle-x15: Switch GPIO fan number BeagleBoard-X15 pre-production change includes switching the GPIO fan gpio over from 1 to 2 to allow for a potential fix at a later point in time for USB client VBUS detection using PMIC VBUS detect capability. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index dd53ea56b0ed..7128fad991ac 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -84,7 +84,7 @@ gpio_fan: gpio_fan { /* Based on 5v 500mA AFB02505HHB */ compatible = "gpio-fan"; - gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>; + gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <13000 1>; #cooling-cells = <2>; From 1822734677d95888d18e3c0e0743727effa62f8e Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 16 Apr 2015 16:56:33 -0500 Subject: [PATCH 219/652] ARM: dts: dra7: Fix efuse register size for ABB Fix a typo in DRA7 dtsi where 12 bytes are needed for register description of ABB efuse registers, however only 8 bytes are provided to map. For some weird reason, this does not generate abort at offset 0x8, probably due to default maps already provided in io.c for the bus register ranges. Reported-by: Matt Gessner Reported-by: Suman Anna Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 0f73fea9f5c3..f03a091cd076 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -911,7 +911,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, - <0x4ae06014 0x4>, <0x4a003b20 0x8>, + <0x4ae06014 0x4>, <0x4a003b20 0xc>, <0x4ae0c158 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -944,7 +944,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, - <0x4ae06010 0x4>, <0x4a0025cc 0x8>, + <0x4ae06010 0x4>, <0x4a0025cc 0xc>, <0x4a002470 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -977,7 +977,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, - <0x4ae06010 0x4>, <0x4a0025e0 0x8>, + <0x4ae06010 0x4>, <0x4a0025e0 0xc>, <0x4a00246c 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -1010,7 +1010,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, - <0x4ae06010 0x4>, <0x4a003b08 0x8>, + <0x4ae06010 0x4>, <0x4a003b08 0xc>, <0x4ae0c154 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", From 9a9324d3969678d44b330e1230ad2c8ae67acf81 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 4 May 2015 12:20:29 -0400 Subject: [PATCH 220/652] libata: Blacklist queued TRIM on all Samsung 800-series MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The queued TRIM problems appear to be generic to Samsung's firmware and not tied to a particular model. A recent update to the 840 EVO firmware introduced the same issue as we saw on 850 Pro. Blacklist queued TRIM on all 800-series drives while we work this issue with Samsung. Reported-by: Günter Waller Reported-by: Sven Köhler Signed-off-by: Martin K. Petersen Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 85e659945c12..577849c6611a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4235,7 +4235,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, - { "Samsung SSD 850 PRO*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, /* From 4adf82c35572c69e96997641612fc88463b08f6f Mon Sep 17 00:00:00 2001 From: Illia Smyrnov Date: Thu, 16 Apr 2015 17:42:30 -0500 Subject: [PATCH 221/652] bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance The base address for DRA7 CLK1_HOST_CLK1_2 host instance is 0x44800000, so correct offset is 0x800000. DRA7 TRM rev X(fewb 2015) has updates for this information. With wrong offset these errors are not correctly cleared by the L3 IRQ handler and cause an continuous interrupt scenario and system lockup. Signed-off-by: Illia Smyrnov Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- drivers/bus/omap_l3_noc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h index 95254585db86..a314d800f394 100644 --- a/drivers/bus/omap_l3_noc.h +++ b/drivers/bus/omap_l3_noc.h @@ -274,7 +274,7 @@ static struct l3_flagmux_data dra_l3_flagmux_clk1 = { static struct l3_target_data dra_l3_target_data_clk2[] = { {0x0, "HOST CLK1",}, - {0x0, "HOST CLK2",}, + {0x800000, "HOST CLK2",}, {0xdead, L3_TARGET_NOT_SUPPORTED,}, {0x3400, "SHA2_2",}, {0x0900, "BB2D",}, From e7309c2673a389a495fcfad70376d3bae8b9bc89 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 24 Apr 2015 12:54:20 -0500 Subject: [PATCH 222/652] bus: omap_l3_noc: Fix master id address decoding for OMAP5 The L3 Error handling on OMAP5 for the most part is very similar to that of OMAP4, and had leveraged common data structures and register layout definitions so far. Upon closer inspection, there are a few minor differences causing an incorrect decoding and reporting of the master NIU upon an error: 1. The L3_TARG_STDERRLOG_MSTADDR.STDERRLOG_MSTADDR occupies 11 bits on OMAP5 as against 8 bits on OMAP4, with the master NIU connID encoded in the 6 MSBs of the STDERRLOG_MSTADDR field. 2. The CLK3 FlagMux component has 1 input source on OMAP4 and 3 input sources on OMAP5. The common DEBUGSS source is at a different input on each SoC. Fix the above issues by using a OMAP5-specific compatible property and using SoC-specific data where there are differences. Signed-off-by: Suman Anna Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- .../devicetree/bindings/arm/omap/l3-noc.txt | 1 + arch/arm/boot/dts/omap5.dtsi | 2 +- drivers/bus/omap_l3_noc.c | 5 +- drivers/bus/omap_l3_noc.h | 52 ++++++++++++++----- 4 files changed, 44 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt index 974624ea68f6..161448da959d 100644 --- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -6,6 +6,7 @@ provided by Arteris. Required properties: - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family Should be "ti,omap4-l3-noc" for OMAP4 family + Should be "ti,omap5-l3-noc" for OMAP5 family Should be "ti,dra7-l3-noc" for DRA7 family Should be "ti,am4372-l3-noc" for AM43 family - reg: Contains L3 register address range for each noc domain. diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index efe5f737f39b..7d24ae0306b5 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -128,7 +128,7 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "ti,omap5-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 11f7982cbdb3..ebee57d715d2 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -1,7 +1,7 @@ /* * OMAP L3 Interconnect error handling driver * - * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/ * Santosh Shilimkar * Sricharan * @@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) } static const struct of_device_id l3_noc_match[] = { - {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data}, + {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data}, + {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data}, {.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data}, {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data}, {}, diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h index a314d800f394..73431f81da28 100644 --- a/drivers/bus/omap_l3_noc.h +++ b/drivers/bus/omap_l3_noc.h @@ -1,7 +1,7 @@ /* * OMAP L3 Interconnect error handling driver header * - * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/ * Santosh Shilimkar * sricharan * @@ -175,16 +175,14 @@ static struct l3_flagmux_data omap_l3_flagmux_clk2 = { }; -static struct l3_target_data omap_l3_target_data_clk3[] = { - {0x0100, "EMUSS",}, - {0x0300, "DEBUG SOURCE",}, - {0x0, "HOST CLK3",}, +static struct l3_target_data omap4_l3_target_data_clk3[] = { + {0x0100, "DEBUGSS",}, }; -static struct l3_flagmux_data omap_l3_flagmux_clk3 = { +static struct l3_flagmux_data omap4_l3_flagmux_clk3 = { .offset = 0x0200, - .l3_targ = omap_l3_target_data_clk3, - .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3), + .l3_targ = omap4_l3_target_data_clk3, + .num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3), }; static struct l3_masters_data omap_l3_masters[] = { @@ -215,21 +213,49 @@ static struct l3_masters_data omap_l3_masters[] = { { 0x32, "USBHOSTFS"} }; -static struct l3_flagmux_data *omap_l3_flagmux[] = { +static struct l3_flagmux_data *omap4_l3_flagmux[] = { &omap_l3_flagmux_clk1, &omap_l3_flagmux_clk2, - &omap_l3_flagmux_clk3, + &omap4_l3_flagmux_clk3, }; -static const struct omap_l3 omap_l3_data = { - .l3_flagmux = omap_l3_flagmux, - .num_modules = ARRAY_SIZE(omap_l3_flagmux), +static const struct omap_l3 omap4_l3_data = { + .l3_flagmux = omap4_l3_flagmux, + .num_modules = ARRAY_SIZE(omap4_l3_flagmux), .l3_masters = omap_l3_masters, .num_masters = ARRAY_SIZE(omap_l3_masters), /* The 6 MSBs of register field used to distinguish initiator */ .mst_addr_mask = 0xFC, }; +/* OMAP5 data */ +static struct l3_target_data omap5_l3_target_data_clk3[] = { + {0x0100, "L3INSTR",}, + {0x0300, "DEBUGSS",}, + {0x0, "HOSTCLK3",}, +}; + +static struct l3_flagmux_data omap5_l3_flagmux_clk3 = { + .offset = 0x0200, + .l3_targ = omap5_l3_target_data_clk3, + .num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3), +}; + +static struct l3_flagmux_data *omap5_l3_flagmux[] = { + &omap_l3_flagmux_clk1, + &omap_l3_flagmux_clk2, + &omap5_l3_flagmux_clk3, +}; + +static const struct omap_l3 omap5_l3_data = { + .l3_flagmux = omap5_l3_flagmux, + .num_modules = ARRAY_SIZE(omap5_l3_flagmux), + .l3_masters = omap_l3_masters, + .num_masters = ARRAY_SIZE(omap_l3_masters), + /* The 6 MSBs of register field used to distinguish initiator */ + .mst_addr_mask = 0x7E0, +}; + /* DRA7 data */ static struct l3_target_data dra_l3_target_data_clk1[] = { {0x2a00, "AES1",}, From 6b096fded15bbf0cd4b39fdab3dfe306210ad3f6 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Sat, 2 May 2015 19:23:22 +0200 Subject: [PATCH 223/652] isdn/gigaset: cede maintainership MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As German phone operators are discontinuing ISDN service, neither Hansjörg nor I will be able to maintain the Gigaset ISDN drivers any longer. Paul Bolle offered to step into the breach for odd fixes. Signed-off-by: Tilman Schmidt Acked-by: Paul Bolle Signed-off-by: David S. Miller --- MAINTAINERS | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 16227759dfa8..fa4e59d9c07b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4364,11 +4364,10 @@ F: fs/gfs2/ F: include/uapi/linux/gfs2_ondisk.h GIGASET ISDN DRIVERS -M: Hansjoerg Lipp -M: Tilman Schmidt +M: Paul Bolle L: gigaset307x-common@lists.sourceforge.net W: http://gigaset307x.sourceforge.net/ -S: Maintained +S: Odd Fixes F: Documentation/isdn/README.gigaset F: drivers/isdn/gigaset/ F: include/uapi/linux/gigaset_dev.h From d66bf7dd27573ee5ea90484899ee952c19ccb194 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Sat, 2 May 2015 21:33:44 -0400 Subject: [PATCH 224/652] net: core: Correct an over-stringent device loop detection. The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by: Vladislav Yasevich Acked-by: Jiri Pirko Acked-by: Veaceslav Falico Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index c7ba0388f1be..2c1c67fad64d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5209,7 +5209,7 @@ static int __netdev_upper_dev_link(struct net_device *dev, if (__netdev_find_adj(upper_dev, dev, &upper_dev->all_adj_list.upper)) return -EBUSY; - if (__netdev_find_adj(dev, upper_dev, &dev->all_adj_list.upper)) + if (__netdev_find_adj(dev, upper_dev, &dev->adj_list.upper)) return -EEXIST; if (master && netdev_master_upper_dev_get(dev)) From 013ead48a843442e63b9426e3bd5df18ca5d054a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 1 May 2015 12:34:12 +0200 Subject: [PATCH 225/652] drm/radeon: disable semaphores for UVD V1 (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hardware doesn't seem to work correctly, just block userspace in this case. v2: add missing defines Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320 Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_asic.c | 2 +- drivers/gpu/drm/radeon/radeon_asic.h | 4 ++++ drivers/gpu/drm/radeon/rv770d.h | 3 +++ drivers/gpu/drm/radeon/uvd_v1_0.c | 14 ++------------ drivers/gpu/drm/radeon/uvd_v2_2.c | 29 ++++++++++++++++++++++++++++ 5 files changed, 39 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index fafd8ce4d58f..8dbf5083c4ff 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -1202,7 +1202,7 @@ static struct radeon_asic rs780_asic = { static struct radeon_asic_ring rv770_uvd_ring = { .ib_execute = &uvd_v1_0_ib_execute, .emit_fence = &uvd_v2_2_fence_emit, - .emit_semaphore = &uvd_v1_0_semaphore_emit, + .emit_semaphore = &uvd_v2_2_semaphore_emit, .cs_parse = &radeon_uvd_cs_parse, .ring_test = &uvd_v1_0_ring_test, .ib_test = &uvd_v1_0_ib_test, diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index cf0a90bb61ca..a3ca8cd305c5 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -949,6 +949,10 @@ void uvd_v1_0_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib); int uvd_v2_2_resume(struct radeon_device *rdev); void uvd_v2_2_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence); +bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev, + struct radeon_ring *ring, + struct radeon_semaphore *semaphore, + bool emit_wait); /* uvd v3.1 */ bool uvd_v3_1_semaphore_emit(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h index 3cf1e2921545..9ef2064b1c9c 100644 --- a/drivers/gpu/drm/radeon/rv770d.h +++ b/drivers/gpu/drm/radeon/rv770d.h @@ -989,6 +989,9 @@ ((n) & 0x3FFF) << 16) /* UVD */ +#define UVD_SEMA_ADDR_LOW 0xef00 +#define UVD_SEMA_ADDR_HIGH 0xef04 +#define UVD_SEMA_CMD 0xef08 #define UVD_GPCOM_VCPU_CMD 0xef0c #define UVD_GPCOM_VCPU_DATA0 0xef10 #define UVD_GPCOM_VCPU_DATA1 0xef14 diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c index e72b3cb59358..c6b1cbca47fc 100644 --- a/drivers/gpu/drm/radeon/uvd_v1_0.c +++ b/drivers/gpu/drm/radeon/uvd_v1_0.c @@ -466,18 +466,8 @@ bool uvd_v1_0_semaphore_emit(struct radeon_device *rdev, struct radeon_semaphore *semaphore, bool emit_wait) { - uint64_t addr = semaphore->gpu_addr; - - radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0)); - radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF); - - radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0)); - radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF); - - radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0)); - radeon_ring_write(ring, emit_wait ? 1 : 0); - - return true; + /* disable semaphores for UVD V1 hardware */ + return false; } /** diff --git a/drivers/gpu/drm/radeon/uvd_v2_2.c b/drivers/gpu/drm/radeon/uvd_v2_2.c index 89193519f8a1..7ed778cec7c6 100644 --- a/drivers/gpu/drm/radeon/uvd_v2_2.c +++ b/drivers/gpu/drm/radeon/uvd_v2_2.c @@ -59,6 +59,35 @@ void uvd_v2_2_fence_emit(struct radeon_device *rdev, radeon_ring_write(ring, 2); } +/** + * uvd_v2_2_semaphore_emit - emit semaphore command + * + * @rdev: radeon_device pointer + * @ring: radeon_ring pointer + * @semaphore: semaphore to emit commands for + * @emit_wait: true if we should emit a wait command + * + * Emit a semaphore command (either wait or signal) to the UVD ring. + */ +bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev, + struct radeon_ring *ring, + struct radeon_semaphore *semaphore, + bool emit_wait) +{ + uint64_t addr = semaphore->gpu_addr; + + radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0)); + radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF); + + radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0)); + radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF); + + radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0)); + radeon_ring_write(ring, emit_wait ? 1 : 0); + + return true; +} + /** * uvd_v2_2_resume - memory controller programming * From b2387ddcced8de3e6471a2fb16a409577063016f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 1 May 2015 09:59:44 -0700 Subject: [PATCH 226/652] blk-mq: fix FUA request hang When a FUA request enters its DATA stage of flush pipeline, the request is added to mq requeue list, the request will then be added to ctx->rq_list. blk_mq_attempt_merge() might merge the request with a bio. Later when the request is finished the flush pipeline, the request->__data_len is 0. Then I only saw the bio gets endio called, the original request never finish. Adding REQ_FLUSH_SEQ into REQ_NOMERGE_FLAGS looks an easy fix. stable: 3.15+ Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- include/linux/blk_types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index a1b25e35ea5f..b7299febc4b4 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -220,7 +220,7 @@ enum rq_flag_bits { /* This mask is used for both bio and request merge checking */ #define REQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_FLUSH_SEQ) #define REQ_RAHEAD (1ULL << __REQ_RAHEAD) #define REQ_THROTTLED (1ULL << __REQ_THROTTLED) From 965b2aa78fbcb831acf4f669f494da201f4bcace Mon Sep 17 00:00:00 2001 From: Kamlakant Patel Date: Mon, 4 May 2015 14:39:49 +0530 Subject: [PATCH 227/652] net/smsc911x: fix irq resource allocation failure When smsc911x uses GPIO as the interrupt controller, and if both are loaded as modules, we get following error: "smsc911x: Could not allocate irq resource" This issue is because of smsc911x using platform_get_resource to get device tree based irq resource. commit "9ec36ca (of/irq: do irq resolution in platform_get_irq)" and commit "7085a7 (drivers: platform: parse IRQ flags from resources)" add support in platform_get_irq to resolve irq and irq_flags respectively for both modern device tree and legacy static platform data platforms. Modify smsc911x driver to use platform_get_irq to pick up irq resource correctly and use irq_get_trigger_type to get the IRQ trigger flags. Signed-off-by: Kamlakant Patel Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 41047c9143d0..959aeeade0c9 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2418,9 +2418,9 @@ static int smsc911x_drv_probe(struct platform_device *pdev) struct net_device *dev; struct smsc911x_data *pdata; struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev); - struct resource *res, *irq_res; + struct resource *res; unsigned int intcfg = 0; - int res_size, irq_flags; + int res_size, irq, irq_flags; int retval; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -2434,8 +2434,8 @@ static int smsc911x_drv_probe(struct platform_device *pdev) } res_size = resource_size(res); - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq_res) { + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { pr_warn("Could not allocate irq resource\n"); retval = -ENODEV; goto out_0; @@ -2455,8 +2455,8 @@ static int smsc911x_drv_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); pdata = netdev_priv(dev); - dev->irq = irq_res->start; - irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; + dev->irq = irq; + irq_flags = irq_get_trigger_type(irq); pdata->ioaddr = ioremap_nocache(res->start, res_size); pdata->dev = dev; From a2d4fcb8043402fd24aaef7e00d4c24b1151cda4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 May 2015 15:12:33 -0400 Subject: [PATCH 228/652] Revert "Revert "smc91x: retrieve IRQ and trigger flags in a modern way"" This reverts commit 8d7d9cca4390062ccd09ffd9fdb37d1c4eeea9ac. Now that the necessary infrastructure is really all there in the tree, we can put this change back in. Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 14b363a25c02..630f0b7800e4 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2238,9 +2238,10 @@ static int smc_drv_probe(struct platform_device *pdev) const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; - struct resource *res, *ires; + struct resource *res; unsigned int __iomem *addr; unsigned long irq_flags = SMC_IRQ_FLAGS; + unsigned long irq_resflags; int ret; ndev = alloc_etherdev(sizeof(struct smc_local)); @@ -2332,16 +2333,19 @@ static int smc_drv_probe(struct platform_device *pdev) goto out_free_netdev; } - ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!ires) { + ndev->irq = platform_get_irq(pdev, 0); + if (ndev->irq <= 0) { ret = -ENODEV; goto out_release_io; } - - ndev->irq = ires->start; - - if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) - irq_flags = ires->flags & IRQF_TRIGGER_MASK; + /* + * If this platform does not specify any special irqflags, or if + * the resource supplies a trigger, override the irqflags with + * the trigger flags from the resource. + */ + irq_resflags = irqd_get_trigger_type(irq_get_irq_data(ndev->irq)); + if (irq_flags == -1 || irq_resflags & IRQF_TRIGGER_MASK) + irq_flags = irq_resflags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev, ndev); if (ret) From e2783717a71e9babfdd7c36c7e35b790d2c01022 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 4 May 2015 11:51:38 -0400 Subject: [PATCH 229/652] net/rds: Fix new sparse warning c0adf54a109 introduced new sparse warnings: CHECK /home/dahern/kernels/linux.git/net/rds/ib_cm.c net/rds/ib_cm.c:191:34: warning: incorrect type in initializer (different base types) net/rds/ib_cm.c:191:34: expected unsigned long long [unsigned] [usertype] dp_ack_seq net/rds/ib_cm.c:191:34: got restricted __be64 net/rds/ib_cm.c:194:51: warning: cast to restricted __be64 The temporary variable for sequence number should have been declared as __be64 rather than u64. Make it so. Signed-off-by: David Ahern Cc: shamir rabinovitch Signed-off-by: David S. Miller --- net/rds/ib_cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c index 29144a60019f..8a09ee7db3c1 100644 --- a/net/rds/ib_cm.c +++ b/net/rds/ib_cm.c @@ -188,7 +188,7 @@ void rds_ib_cm_connect_complete(struct rds_connection *conn, struct rdma_cm_even * Since dp_ack_seq is 64-bit extended load operations can be * used so go through get_unaligned to avoid unaligned errors. */ - u64 dp_ack_seq = get_unaligned(&dp->dp_ack_seq); + __be64 dp_ack_seq = get_unaligned(&dp->dp_ack_seq); if (dp_ack_seq) rds_send_drop_acked(conn, be64_to_cpu(dp_ack_seq), From 0650c0b8d9efe5b1205116a2febcb984c6c98472 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 4 May 2015 12:34:12 +0300 Subject: [PATCH 230/652] bnx2x: Fix to prevent inner-reload Submit 909d9faae2a44 ("bnx2x: Prevent inner-reload while VFs exist") contained a bug - MTU change was not prevented by it; Instead, it `randomally' prevented bnx2x_resume() from running [harmless yet wrong]. This moves the check to its correct spot. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a8bb8f664d3d..ec56a9b65dc3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -4786,6 +4786,11 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu) { struct bnx2x *bp = netdev_priv(dev); + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); + return -EPERM; + } + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { BNX2X_ERR("Can't perform change MTU during parity recovery\n"); return -EAGAIN; @@ -4938,11 +4943,6 @@ int bnx2x_resume(struct pci_dev *pdev) } bp = netdev_priv(dev); - if (pci_num_vf(bp->pdev)) { - DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); - return -EPERM; - } - if (bp->recovery_state != BNX2X_RECOVERY_DONE) { BNX2X_ERR("Handling parity error recovery. Try again later\n"); return -EAGAIN; From 9ba52e5812e53f20f23600d79449a3ec05a0254f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 4 May 2015 14:32:48 -0600 Subject: [PATCH 231/652] blk-mq: don't lose requests if a stopped queue restarts Normally if driver is busy to dispatch a request the logic is like below: block layer: driver: __blk_mq_run_hw_queue a. blk_mq_stop_hw_queue b. rq add to ctx->dispatch later: 1. blk_mq_start_hw_queue 2. __blk_mq_run_hw_queue But it's possible step 1-2 runs between a and b. And since rq isn't in ctx->dispatch yet, step 2 will not run rq. The rq might get lost if there are no subsequent requests kick in. Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-mq.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/block/blk-mq.c b/block/blk-mq.c index 76f460e36f1d..e68b71b85a7e 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -858,6 +858,16 @@ static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx) spin_lock(&hctx->lock); list_splice(&rq_list, &hctx->dispatch); spin_unlock(&hctx->lock); + /* + * the queue is expected stopped with BLK_MQ_RQ_QUEUE_BUSY, but + * it's possible the queue is stopped and restarted again + * before this. Queue restart will dispatch requests. And since + * requests in rq_list aren't added into hctx->dispatch yet, + * the requests in rq_list might get lost. + * + * blk_mq_run_hw_queue() already checks the STOPPED bit + **/ + blk_mq_run_hw_queue(hctx, true); } } From 5463e7c18e51152104aba9614e6abfc039a8b710 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Tue, 21 Apr 2015 10:40:54 -0700 Subject: [PATCH 232/652] Revert "f2fs: enhance multi-threads performance" This reports performance regression by Yuanhan Liu. The basic idea was to reduce one-point mutex, but it turns out this causes another contention like context swithes. https://lkml.org/lkml/2015/4/21/11 Until finishing the analysis on this issue, I'd like to revert this for a while. This reverts commit 78373b7319abdf15050af5b1632c4c8b8b398f33. --- fs/f2fs/data.c | 7 +++++++ fs/f2fs/f2fs.h | 1 + fs/f2fs/super.c | 1 + 3 files changed, 9 insertions(+) diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index b91b0e10678e..1e1aae669fa8 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -1513,6 +1513,7 @@ static int f2fs_write_data_pages(struct address_space *mapping, { struct inode *inode = mapping->host; struct f2fs_sb_info *sbi = F2FS_I_SB(inode); + bool locked = false; int ret; long diff; @@ -1533,7 +1534,13 @@ static int f2fs_write_data_pages(struct address_space *mapping, diff = nr_pages_to_write(sbi, DATA, wbc); + if (!S_ISDIR(inode->i_mode)) { + mutex_lock(&sbi->writepages); + locked = true; + } ret = write_cache_pages(mapping, wbc, __f2fs_writepage, mapping); + if (locked) + mutex_unlock(&sbi->writepages); f2fs_submit_merged_bio(sbi, DATA, WRITE); diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index d8921cf2ba9a..8de34ab6d5b1 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -625,6 +625,7 @@ struct f2fs_sb_info { struct mutex cp_mutex; /* checkpoint procedure lock */ struct rw_semaphore cp_rwsem; /* blocking FS operations */ struct rw_semaphore node_write; /* locking node writes */ + struct mutex writepages; /* mutex for writepages() */ wait_queue_head_t cp_wait; struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */ diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 160b88346b24..b2dd1b01f076 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -1035,6 +1035,7 @@ try_onemore: sbi->raw_super = raw_super; sbi->raw_super_buf = raw_super_buf; mutex_init(&sbi->gc_mutex); + mutex_init(&sbi->writepages); mutex_init(&sbi->cp_mutex); init_rwsem(&sbi->node_write); clear_sbi_flag(sbi, SBI_POR_DOING); From 7263b1bd0490fca68ee7eedb0b6973cb86d4701c Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Wed, 22 Apr 2015 11:03:48 -0700 Subject: [PATCH 233/652] f2fs: fix wrong error hanlder in f2fs_follow_link The page_follow_link_light returns NULL and its error pointer was remained in nd->path. Reported-by: Dan Carpenter Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/namei.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index 7e3794edae42..658e8079aaf9 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -298,16 +298,14 @@ fail: static void *f2fs_follow_link(struct dentry *dentry, struct nameidata *nd) { - struct page *page; + struct page *page = page_follow_link_light(dentry, nd); - page = page_follow_link_light(dentry, nd); - if (IS_ERR(page)) + if (IS_ERR_OR_NULL(page)) return page; /* this is broken symlink case */ if (*nd_get_link(nd) == 0) { - kunmap(page); - page_cache_release(page); + page_put_link(dentry, nd, page); return ERR_PTR(-ENOENT); } return page; From 97372e5a99449b4fffa824a382ad6358066a9918 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 8 Apr 2015 07:34:12 +0200 Subject: [PATCH 234/652] clk: exynos5420: Restore GATE_BUS_TOP on suspend Commit ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") added pm support for the pl330 dma driver but it makes the clock for the Exynos5420 MDMA0 DMA controller to be gated during suspend and this in turn makes its parent clock aclk266_g2d to be gated. But the clock needs to be ungated prior suspend to allow the system to be suspend and resumed correctly. Add GATE_BUS_TOP register to the list of registers to be restored when the system enters into a suspend state so aclk266_g2d will be ungated. Thanks to Abhilash Kesavan for figuring out that this was the issue. Fixes: ae43b32 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Javier Martinez Canillas Tested-by: Kevin Hilman Tested-by: Abhilash Kesavan Acked-by: Tomasz Figa Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5420.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 07d666cc6a29..bea4a173eef5 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -271,6 +271,7 @@ static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = { { .offset = SRC_MASK_PERIC0, .value = 0x11111110, }, { .offset = SRC_MASK_PERIC1, .value = 0x11111100, }, { .offset = SRC_MASK_ISP, .value = 0x11111000, }, + { .offset = GATE_BUS_TOP, .value = 0xffffffff, }, { .offset = GATE_BUS_DISP1, .value = 0xffffffff, }, { .offset = GATE_IP_PERIC, .value = 0xffffffff, }, }; From e8a4a2696fecb398b0288c43c0e0dbb91e265bb2 Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Mon, 4 May 2015 21:15:31 -0700 Subject: [PATCH 235/652] x86/spinlocks: Fix regression in spinlock contention detection A spinlock is regarded as contended when there is at least one waiter. Currently, the code that checks whether there are any waiters rely on tail value being greater than head. However, this is not true if tail reaches the max value and wraps back to zero, so arch_spin_is_contended() incorrectly returns 0 (not contended) when tail is smaller than head. The original code (before regression) handled this case by casting the (tail - head) to an unsigned value. This change simply restores that behavior. Fixes: d6abfdb20223 ("x86/spinlocks/paravirt: Fix memory corruption on unlock") Signed-off-by: Tahsin Erdogan Cc: peterz@infradead.org Cc: Waiman.Long@hp.com Cc: borntraeger@de.ibm.com Cc: oleg@redhat.com Cc: raghavendra.kt@linux.vnet.ibm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1430799331-20445-1-git-send-email-tahsin@google.com Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/spinlock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index cf87de3fc390..64b611782ef0 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -169,7 +169,7 @@ static inline int arch_spin_is_contended(arch_spinlock_t *lock) struct __raw_tickets tmp = READ_ONCE(lock->tickets); tmp.head &= ~TICKET_SLOWPATH_FLAG; - return (tmp.tail - tmp.head) > TICKET_LOCK_INC; + return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC; } #define arch_spin_is_contended arch_spin_is_contended From b9a95e85bbc56f168f078885f414f305b4589c4b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 May 2015 13:48:17 +0100 Subject: [PATCH 236/652] Revert "arm64: alternative: Allow immediate branch as alternative instruction" This reverts most of commit fef7f2b2010381c795ae43743ad31931cc58f5ad. It turns out that there are a couple of problems with the way we're fixing up branch instructions used as part of alternative instruction sequences: (1) If the branch target is also in the alternative sequence, we'll generate a branch into the .altinstructions section which actually gets freed. (2) The calls to aarch64_insn_{read,write} bring an awful lot more code into the patching path (e.g. taking locks, poking the fixmap, invalidating the TLB) which isn't actually needed for the early patching run under stop_machine, but makes the use of alternative sequences extremely fragile (as we can't patch code that could be used by the patching code). Given that no code actually requires alternative patching of immediate branches, let's remove this support for now and revisit it when we've got a user. We leave the updated size check, since we really do require the sequences to be the same length. Acked-by: Marc Zyngier Signed-off-by: Will Deacon --- arch/arm64/kernel/alternative.c | 53 +-------------------------------- 1 file changed, 1 insertion(+), 52 deletions(-) diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index 21033bba9390..28f8365edc4c 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -24,7 +24,6 @@ #include #include #include -#include #include extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; @@ -34,48 +33,6 @@ struct alt_region { struct alt_instr *end; }; -/* - * Decode the imm field of a b/bl instruction, and return the byte - * offset as a signed value (so it can be used when computing a new - * branch target). - */ -static s32 get_branch_offset(u32 insn) -{ - s32 imm = aarch64_insn_decode_immediate(AARCH64_INSN_IMM_26, insn); - - /* sign-extend the immediate before turning it into a byte offset */ - return (imm << 6) >> 4; -} - -static u32 get_alt_insn(u8 *insnptr, u8 *altinsnptr) -{ - u32 insn; - - aarch64_insn_read(altinsnptr, &insn); - - /* Stop the world on instructions we don't support... */ - BUG_ON(aarch64_insn_is_cbz(insn)); - BUG_ON(aarch64_insn_is_cbnz(insn)); - BUG_ON(aarch64_insn_is_bcond(insn)); - /* ... and there is probably more. */ - - if (aarch64_insn_is_b(insn) || aarch64_insn_is_bl(insn)) { - enum aarch64_insn_branch_type type; - unsigned long target; - - if (aarch64_insn_is_b(insn)) - type = AARCH64_INSN_BRANCH_NOLINK; - else - type = AARCH64_INSN_BRANCH_LINK; - - target = (unsigned long)altinsnptr + get_branch_offset(insn); - insn = aarch64_insn_gen_branch_imm((unsigned long)insnptr, - target, type); - } - - return insn; -} - static int __apply_alternatives(void *alt_region) { struct alt_instr *alt; @@ -83,9 +40,6 @@ static int __apply_alternatives(void *alt_region) u8 *origptr, *replptr; for (alt = region->begin; alt < region->end; alt++) { - u32 insn; - int i; - if (!cpus_have_cap(alt->cpufeature)) continue; @@ -95,12 +49,7 @@ static int __apply_alternatives(void *alt_region) origptr = (u8 *)&alt->orig_offset + alt->orig_offset; replptr = (u8 *)&alt->alt_offset + alt->alt_offset; - - for (i = 0; i < alt->alt_len; i += sizeof(insn)) { - insn = get_alt_insn(origptr + i, replptr + i); - aarch64_insn_write(origptr + i, insn); - } - + memcpy(origptr, replptr, alt->alt_len); flush_icache_range((uintptr_t)origptr, (uintptr_t)(origptr + alt->alt_len)); } From 326a780317d572711f70d53054502e86a1ff5317 Mon Sep 17 00:00:00 2001 From: Jungseung Lee Date: Mon, 4 May 2015 11:33:48 +0100 Subject: [PATCH 237/652] arm64: mm: Fix build error with CONFIG_SPARSEMEM_VMEMMAP disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fix the below build error: arch/arm64/mm/dump.c: In function ‘ptdump_init’: arch/arm64/mm/dump.c:331:18: error: ‘VMEMMAP_START_NR’ undeclared (first use in this function) address_markers[VMEMMAP_START_NR].start_address = ^ arch/arm64/mm/dump.c:331:18: note: each undeclared identifier is reported only once for each function it appears in arch/arm64/mm/dump.c:333:18: error: ‘VMEMMAP_END_NR’ undeclared (first use in this function) address_markers[VMEMMAP_END_NR].start_address = ^ Acked-by: Laura Abbott Signed-off-by: Jungseung Lee Signed-off-by: Will Deacon --- arch/arm64/mm/dump.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c index 74c256744b25..f3d6221cd5bd 100644 --- a/arch/arm64/mm/dump.c +++ b/arch/arm64/mm/dump.c @@ -328,10 +328,12 @@ static int ptdump_init(void) for (j = 0; j < pg_level[i].num; j++) pg_level[i].mask |= pg_level[i].bits[j].mask; +#ifdef CONFIG_SPARSEMEM_VMEMMAP address_markers[VMEMMAP_START_NR].start_address = (unsigned long)virt_to_page(PAGE_OFFSET); address_markers[VMEMMAP_END_NR].start_address = (unsigned long)virt_to_page(high_memory); +#endif pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL, &ptdump_fops); From 2c674fac5b1603c6a2aacc88116e3fbc75ebd799 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 5 May 2015 15:02:42 +0800 Subject: [PATCH 238/652] ALSA: hda/realtek - Add ALC298 alias name for Dell Add ALC3266 for Dell platform. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 516a0da6c080..4a0a238c9864 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -883,6 +883,7 @@ static struct alc_codec_rename_pci_table rename_pci_tbl[] = { { 0x10ec0668, 0x1028, 0, "ALC3661" }, { 0x10ec0275, 0x1028, 0, "ALC3260" }, { 0x10ec0899, 0x1028, 0, "ALC3861" }, + { 0x10ec0298, 0x1028, 0, "ALC3266" }, { 0x10ec0670, 0x1025, 0, "ALC669X" }, { 0x10ec0676, 0x1025, 0, "ALC679X" }, { 0x10ec0282, 0x1043, 0, "ALC3229" }, From 285214409a9e5fceba2215461b4682b6069d8e77 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Mon, 20 Apr 2015 14:01:11 -0600 Subject: [PATCH 239/652] RDMA/CMA: Canonize IPv4 on IPV6 sockets properly When accepting a new IPv4 connect to an IPv6 socket, the CMA tries to canonize the address family to IPv4, but does not properly process the listening sockaddr to get the listening port, and does not properly set the address family of the canonized sockaddr. Fixes: e51060f08a61 ("IB: IP address based RDMA connection manager") Cc: Reported-By: Yotam Kenneth Signed-off-by: Jason Gunthorpe Tested-by: Haggai Eran Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index d570030d899c..06441a43c3aa 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -859,19 +859,27 @@ static void cma_save_ib_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id memcpy(&ib->sib_addr, &path->dgid, 16); } +static __be16 ss_get_port(const struct sockaddr_storage *ss) +{ + if (ss->ss_family == AF_INET) + return ((struct sockaddr_in *)ss)->sin_port; + else if (ss->ss_family == AF_INET6) + return ((struct sockaddr_in6 *)ss)->sin6_port; + BUG(); +} + static void cma_save_ip4_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id, struct cma_hdr *hdr) { - struct sockaddr_in *listen4, *ip4; + struct sockaddr_in *ip4; - listen4 = (struct sockaddr_in *) &listen_id->route.addr.src_addr; ip4 = (struct sockaddr_in *) &id->route.addr.src_addr; - ip4->sin_family = listen4->sin_family; + ip4->sin_family = AF_INET; ip4->sin_addr.s_addr = hdr->dst_addr.ip4.addr; - ip4->sin_port = listen4->sin_port; + ip4->sin_port = ss_get_port(&listen_id->route.addr.src_addr); ip4 = (struct sockaddr_in *) &id->route.addr.dst_addr; - ip4->sin_family = listen4->sin_family; + ip4->sin_family = AF_INET; ip4->sin_addr.s_addr = hdr->src_addr.ip4.addr; ip4->sin_port = hdr->port; } @@ -879,16 +887,15 @@ static void cma_save_ip4_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_i static void cma_save_ip6_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id, struct cma_hdr *hdr) { - struct sockaddr_in6 *listen6, *ip6; + struct sockaddr_in6 *ip6; - listen6 = (struct sockaddr_in6 *) &listen_id->route.addr.src_addr; ip6 = (struct sockaddr_in6 *) &id->route.addr.src_addr; - ip6->sin6_family = listen6->sin6_family; + ip6->sin6_family = AF_INET6; ip6->sin6_addr = hdr->dst_addr.ip6; - ip6->sin6_port = listen6->sin6_port; + ip6->sin6_port = ss_get_port(&listen_id->route.addr.src_addr); ip6 = (struct sockaddr_in6 *) &id->route.addr.dst_addr; - ip6->sin6_family = listen6->sin6_family; + ip6->sin6_family = AF_INET6; ip6->sin6_addr = hdr->src_addr.ip6; ip6->sin6_port = hdr->port; } From 0b7410471d59ce2ea30453e68c03bdb941d5951e Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:44:58 +0530 Subject: [PATCH 240/652] iw_cxgb4: Cleanup register defines/MACROS Cleanup macros and register defines for consistency Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 4 ++-- drivers/infiniband/hw/cxgb4/t4fw_ri_api.h | 4 +++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 57176ddd4c50..0493cca3ec15 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -675,7 +675,7 @@ static int send_connect(struct c4iw_ep *ep) if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) { opt2 |= T5_OPT_2_VALID_F; opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE); - opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */ + opt2 |= T5_ISS_F; } t4_set_arp_err_handler(skb, ep, act_open_req_arp_failure); @@ -2214,7 +2214,7 @@ static void accept_cr(struct c4iw_ep *ep, struct sk_buff *skb, u32 isn = (prandom_u32() & ~7UL) - 1; opt2 |= T5_OPT_2_VALID_F; opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE); - opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */ + opt2 |= T5_ISS_F; rpl5 = (void *)rpl; memset(&rpl5->iss, 0, roundup(sizeof(*rpl5)-sizeof(*rpl), 16)); if (peer2peer) diff --git a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h index 5e53327fc647..343e8daf2270 100644 --- a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h +++ b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h @@ -848,6 +848,8 @@ enum { /* TCP congestion control algorithms */ #define CONG_CNTRL_V(x) ((x) << CONG_CNTRL_S) #define CONG_CNTRL_G(x) (((x) >> CONG_CNTRL_S) & CONG_CNTRL_M) -#define CONG_CNTRL_VALID (1 << 18) +#define T5_ISS_S 18 +#define T5_ISS_V(x) ((x) << T5_ISS_S) +#define T5_ISS_F T5_ISS_V(1U) #endif /* _T4FW_RI_API_H_ */ From 6198dd8d7a6a7f40dc4599cb0676101d9cb82776 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:44:59 +0530 Subject: [PATCH 241/652] iw_cxgb4: 32b platform fixes - get_dma_mr() was using ~0UL which is should be ~0ULL. This causes the DMA MR to get setup incorrectly in hardware. - wr_log_show() needed a 64b divide function div64_u64() instead of doing division directly. - fixed warnings about recasting a pointer to a u64 Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 2 +- drivers/infiniband/hw/cxgb4/cq.c | 7 +++---- drivers/infiniband/hw/cxgb4/device.c | 6 +++--- drivers/infiniband/hw/cxgb4/mem.c | 6 +++--- drivers/infiniband/hw/cxgb4/qp.c | 10 +++++----- 5 files changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 0493cca3ec15..6fb31bacd5b4 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -3571,7 +3571,7 @@ static void send_fw_pass_open_req(struct c4iw_dev *dev, struct sk_buff *skb, * TP will ignore any value > 0 for MSS index. */ req->tcb.opt0 = cpu_to_be64(MSS_IDX_V(0xF)); - req->cookie = (unsigned long)skb; + req->cookie = (uintptr_t)skb; set_wr_txq(req_skb, CPL_PRIORITY_CONTROL, port_id); ret = cxgb4_ofld_send(dev->rdev.lldi.ports[0], req_skb); diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index ab7692ac2044..25dbd6986301 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -55,7 +55,7 @@ static int destroy_cq(struct c4iw_rdev *rdev, struct t4_cq *cq, FW_RI_RES_WR_NRES_V(1) | FW_WR_COMPL_F); res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16)); - res_wr->cookie = (unsigned long) &wr_wait; + res_wr->cookie = (uintptr_t)&wr_wait; res = res_wr->res; res->u.cq.restype = FW_RI_RES_TYPE_CQ; res->u.cq.op = FW_RI_RES_OP_RESET; @@ -125,7 +125,7 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq, FW_RI_RES_WR_NRES_V(1) | FW_WR_COMPL_F); res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16)); - res_wr->cookie = (unsigned long) &wr_wait; + res_wr->cookie = (uintptr_t)&wr_wait; res = res_wr->res; res->u.cq.restype = FW_RI_RES_TYPE_CQ; res->u.cq.op = FW_RI_RES_OP_WRITE; @@ -970,8 +970,7 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries, } PDBG("%s cqid 0x%0x chp %p size %u memsize %zu, dma_addr 0x%0llx\n", __func__, chp->cq.cqid, chp, chp->cq.size, - chp->cq.memsize, - (unsigned long long) chp->cq.dma_addr); + chp->cq.memsize, (unsigned long long) chp->cq.dma_addr); return &chp->ibcq; err5: kfree(mm2); diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 8fb295e4a9ab..7ed32537eb59 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -151,7 +151,7 @@ static int wr_log_show(struct seq_file *seq, void *v) int prev_ts_set = 0; int idx, end; -#define ts2ns(ts) div64_ul((ts) * dev->rdev.lldi.cclk_ps, 1000) +#define ts2ns(ts) div64_u64((ts) * dev->rdev.lldi.cclk_ps, 1000) idx = atomic_read(&dev->rdev.wr_log_idx) & (dev->rdev.wr_log_size - 1); @@ -784,10 +784,10 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev) rdev->lldi.vr->qp.size, rdev->lldi.vr->cq.start, rdev->lldi.vr->cq.size); - PDBG("udb len 0x%x udb base %llx db_reg %p gts_reg %p qpshift %lu " + PDBG("udb len 0x%x udb base %p db_reg %p gts_reg %p qpshift %lu " "qpmask 0x%x cqshift %lu cqmask 0x%x\n", (unsigned)pci_resource_len(rdev->lldi.pdev, 2), - (u64)pci_resource_start(rdev->lldi.pdev, 2), + (void *)pci_resource_start(rdev->lldi.pdev, 2), rdev->lldi.db_reg, rdev->lldi.gts_reg, rdev->qpshift, rdev->qpmask, diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 3ef0cf9f5c44..cff815b91707 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -144,7 +144,7 @@ static int _c4iw_write_mem_inline(struct c4iw_rdev *rdev, u32 addr, u32 len, if (i == (num_wqe-1)) { req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR) | FW_WR_COMPL_F); - req->wr.wr_lo = (__force __be64)(unsigned long) &wr_wait; + req->wr.wr_lo = (__force __be64)&wr_wait; } else req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR)); req->wr.wr_mid = cpu_to_be32( @@ -676,12 +676,12 @@ struct ib_mr *c4iw_get_dma_mr(struct ib_pd *pd, int acc) mhp->attr.zbva = 0; mhp->attr.va_fbo = 0; mhp->attr.page_size = 0; - mhp->attr.len = ~0UL; + mhp->attr.len = ~0ULL; mhp->attr.pbl_size = 0; ret = write_tpt_entry(&rhp->rdev, 0, &stag, 1, php->pdid, FW_RI_STAG_NSMR, mhp->attr.perms, - mhp->attr.mw_bind_enable, 0, 0, ~0UL, 0, 0, 0); + mhp->attr.mw_bind_enable, 0, 0, ~0ULL, 0, 0, 0); if (ret) goto err1; diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 15cae5a31018..389ced335bc5 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -275,7 +275,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq, FW_RI_RES_WR_NRES_V(2) | FW_WR_COMPL_F); res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16)); - res_wr->cookie = (unsigned long) &wr_wait; + res_wr->cookie = (uintptr_t)&wr_wait; res = res_wr->res; res->u.sqrq.restype = FW_RI_RES_TYPE_SQ; res->u.sqrq.op = FW_RI_RES_OP_WRITE; @@ -1209,7 +1209,7 @@ static int rdma_fini(struct c4iw_dev *rhp, struct c4iw_qp *qhp, wqe->flowid_len16 = cpu_to_be32( FW_WR_FLOWID_V(ep->hwtid) | FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16))); - wqe->cookie = (unsigned long) &ep->com.wr_wait; + wqe->cookie = (uintptr_t)&ep->com.wr_wait; wqe->u.fini.type = FW_RI_TYPE_FINI; ret = c4iw_ofld_send(&rhp->rdev, skb); @@ -1279,7 +1279,7 @@ static int rdma_init(struct c4iw_dev *rhp, struct c4iw_qp *qhp) FW_WR_FLOWID_V(qhp->ep->hwtid) | FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16))); - wqe->cookie = (unsigned long) &qhp->ep->com.wr_wait; + wqe->cookie = (uintptr_t)&qhp->ep->com.wr_wait; wqe->u.init.type = FW_RI_TYPE_INIT; wqe->u.init.mpareqbit_p2ptype = @@ -1766,11 +1766,11 @@ struct ib_qp *c4iw_create_qp(struct ib_pd *pd, struct ib_qp_init_attr *attrs, mm2->len = PAGE_ALIGN(qhp->wq.rq.memsize); insert_mmap(ucontext, mm2); mm3->key = uresp.sq_db_gts_key; - mm3->addr = (__force unsigned long) qhp->wq.sq.udb; + mm3->addr = (__force unsigned long)qhp->wq.sq.udb; mm3->len = PAGE_SIZE; insert_mmap(ucontext, mm3); mm4->key = uresp.rq_db_gts_key; - mm4->addr = (__force unsigned long) qhp->wq.rq.udb; + mm4->addr = (__force unsigned long)qhp->wq.rq.udb; mm4->len = PAGE_SIZE; insert_mmap(ucontext, mm4); if (mm5) { From 09ece8b9e983fe858de6eab7a386d58d194227b6 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:45:00 +0530 Subject: [PATCH 242/652] iw_cxgb4: use BAR2 GTS register for T5 kernel mode CQs For T5, we must not use the kdb/kgts registers, in order avoid db drops under extreme loads. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cq.c | 15 +++++++++++---- drivers/infiniband/hw/cxgb4/t4.h | 7 ++++--- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 25dbd6986301..68ddb3710215 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -156,12 +156,19 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq, goto err4; cq->gen = 1; - cq->gts = rdev->lldi.gts_reg; cq->rdev = rdev; if (user) { - cq->ugts = (u64)pci_resource_start(rdev->lldi.pdev, 2) + - (cq->cqid << rdev->cqshift); - cq->ugts &= PAGE_MASK; + u32 off = (cq->cqid << rdev->cqshift) & PAGE_MASK; + + cq->ugts = (u64)rdev->bar2_pa + off; + } else if (is_t4(rdev->lldi.adapter_type)) { + cq->gts = rdev->lldi.gts_reg; + cq->qid_mask = -1U; + } else { + u32 off = ((cq->cqid << rdev->cqshift) & PAGE_MASK) + 12; + + cq->gts = rdev->bar2_kva + off; + cq->qid_mask = rdev->qpmask; } return 0; err4: diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h index 871cdcac7be2..7f2a6c244d25 100644 --- a/drivers/infiniband/hw/cxgb4/t4.h +++ b/drivers/infiniband/hw/cxgb4/t4.h @@ -539,6 +539,7 @@ struct t4_cq { size_t memsize; __be64 bits_type_ts; u32 cqid; + u32 qid_mask; int vector; u16 size; /* including status page */ u16 cidx; @@ -563,12 +564,12 @@ static inline int t4_arm_cq(struct t4_cq *cq, int se) set_bit(CQ_ARMED, &cq->flags); while (cq->cidx_inc > CIDXINC_M) { val = SEINTARM_V(0) | CIDXINC_V(CIDXINC_M) | TIMERREG_V(7) | - INGRESSQID_V(cq->cqid); + INGRESSQID_V(cq->cqid & cq->qid_mask); writel(val, cq->gts); cq->cidx_inc -= CIDXINC_M; } val = SEINTARM_V(se) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(6) | - INGRESSQID_V(cq->cqid); + INGRESSQID_V(cq->cqid & cq->qid_mask); writel(val, cq->gts); cq->cidx_inc = 0; return 0; @@ -601,7 +602,7 @@ static inline void t4_hwcq_consume(struct t4_cq *cq) u32 val; val = SEINTARM_V(0) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(7) | - INGRESSQID_V(cq->cqid); + INGRESSQID_V(cq->cqid & cq->qid_mask); writel(val, cq->gts); cq->cidx_inc = 0; } From 4a75a86c8d04390f268d7237cc49fe9a8e36efe7 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:45:01 +0530 Subject: [PATCH 243/652] iw_cxgb4: enforce qp/cq id requirements Currently the iw_cxgb4 implementation requires the qp and cq qid densities to match as well as the qp and cq id ranges. So fail a device open if the device configuration doesn't meet the requirements. The reason for these restictions has to do with the fact that IQ qid X has a UGTS register in the same bar2 page as EQ qid X. Thus both qids need to be allocated to the same user process for security reasons. The logic that does this (the qpid allocator in iw_cxgb4/resource.c) handles this but requires the above restrictions. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/device.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 7ed32537eb59..83209bb38285 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -764,6 +764,29 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev) c4iw_init_dev_ucontext(rdev, &rdev->uctx); + /* + * This implementation assumes udb_density == ucq_density! Eventually + * we might need to support this but for now fail the open. Also the + * cqid and qpid range must match for now. + */ + if (rdev->lldi.udb_density != rdev->lldi.ucq_density) { + pr_err(MOD "%s: unsupported udb/ucq densities %u/%u\n", + pci_name(rdev->lldi.pdev), rdev->lldi.udb_density, + rdev->lldi.ucq_density); + err = -EINVAL; + goto err1; + } + if (rdev->lldi.vr->qp.start != rdev->lldi.vr->cq.start || + rdev->lldi.vr->qp.size != rdev->lldi.vr->cq.size) { + pr_err(MOD "%s: unsupported qp and cq id ranges " + "qp start %u size %u cq start %u size %u\n", + pci_name(rdev->lldi.pdev), rdev->lldi.vr->qp.start, + rdev->lldi.vr->qp.size, rdev->lldi.vr->cq.size, + rdev->lldi.vr->cq.size); + err = -EINVAL; + goto err1; + } + /* * qpshift is the number of bits to shift the qpid left in order * to get the correct address of the doorbell for that qp. From 6eec177461751f0fe191cf9977cde692b9481d0a Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Tue, 21 Apr 2015 16:28:10 -0400 Subject: [PATCH 244/652] RDMA/core: Enable the iWarp Port Mapper to provide the actual address of the connecting peer to its clients Add functionality to enable the port mapper on the passive side to provide to its clients the actual (non-mapped) ip/tcp address information of the connecting peer 1) Adding remote_info_cb() to process the address info of the connecting peer The address info is provided by the user space port mapper service when the connection is initiated by the peer 2) Adding a hash list to store the remote address info 3) Adding functionality to add/remove the remote address info After the info has been provided to the port mapper client, it is removed from the hash list Signed-off-by: Tatyana Nikolova Reviewed-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/core/iwpm_msg.c | 73 +++++++++- drivers/infiniband/core/iwpm_util.c | 208 +++++++++++++++++++++++----- drivers/infiniband/core/iwpm_util.h | 15 ++ include/rdma/iw_portmap.h | 25 ++++ include/uapi/rdma/rdma_netlink.h | 1 + 5 files changed, 288 insertions(+), 34 deletions(-) diff --git a/drivers/infiniband/core/iwpm_msg.c b/drivers/infiniband/core/iwpm_msg.c index b85ddbc979e0..ab081702566f 100644 --- a/drivers/infiniband/core/iwpm_msg.c +++ b/drivers/infiniband/core/iwpm_msg.c @@ -468,7 +468,8 @@ add_mapping_response_exit: } EXPORT_SYMBOL(iwpm_add_mapping_cb); -/* netlink attribute policy for the response to add and query mapping request */ +/* netlink attribute policy for the response to add and query mapping request + * and response with remote address info */ static const struct nla_policy resp_query_policy[IWPM_NLA_RQUERY_MAPPING_MAX] = { [IWPM_NLA_QUERY_MAPPING_SEQ] = { .type = NLA_U32 }, [IWPM_NLA_QUERY_LOCAL_ADDR] = { .len = sizeof(struct sockaddr_storage) }, @@ -559,6 +560,76 @@ query_mapping_response_exit: } EXPORT_SYMBOL(iwpm_add_and_query_mapping_cb); +/* + * iwpm_remote_info_cb - Process a port mapper message, containing + * the remote connecting peer address info + */ +int iwpm_remote_info_cb(struct sk_buff *skb, struct netlink_callback *cb) +{ + struct nlattr *nltb[IWPM_NLA_RQUERY_MAPPING_MAX]; + struct sockaddr_storage *local_sockaddr, *remote_sockaddr; + struct sockaddr_storage *mapped_loc_sockaddr, *mapped_rem_sockaddr; + struct iwpm_remote_info *rem_info; + const char *msg_type; + u8 nl_client; + int ret = -EINVAL; + + msg_type = "Remote Mapping info"; + if (iwpm_parse_nlmsg(cb, IWPM_NLA_RQUERY_MAPPING_MAX, + resp_query_policy, nltb, msg_type)) + return ret; + + nl_client = RDMA_NL_GET_CLIENT(cb->nlh->nlmsg_type); + if (!iwpm_valid_client(nl_client)) { + pr_info("%s: Invalid port mapper client = %d\n", + __func__, nl_client); + return ret; + } + atomic_set(&echo_nlmsg_seq, cb->nlh->nlmsg_seq); + + local_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_QUERY_LOCAL_ADDR]); + remote_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_QUERY_REMOTE_ADDR]); + mapped_loc_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_LOC_ADDR]); + mapped_rem_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_REM_ADDR]); + + if (mapped_loc_sockaddr->ss_family != local_sockaddr->ss_family || + mapped_rem_sockaddr->ss_family != remote_sockaddr->ss_family) { + pr_info("%s: Sockaddr family doesn't match the requested one\n", + __func__); + return ret; + } + rem_info = kzalloc(sizeof(struct iwpm_remote_info), GFP_ATOMIC); + if (!rem_info) { + pr_err("%s: Unable to allocate a remote info\n", __func__); + ret = -ENOMEM; + return ret; + } + memcpy(&rem_info->mapped_loc_sockaddr, mapped_loc_sockaddr, + sizeof(struct sockaddr_storage)); + memcpy(&rem_info->remote_sockaddr, remote_sockaddr, + sizeof(struct sockaddr_storage)); + memcpy(&rem_info->mapped_rem_sockaddr, mapped_rem_sockaddr, + sizeof(struct sockaddr_storage)); + rem_info->nl_client = nl_client; + + iwpm_add_remote_info(rem_info); + + iwpm_print_sockaddr(local_sockaddr, + "remote_info: Local sockaddr:"); + iwpm_print_sockaddr(mapped_loc_sockaddr, + "remote_info: Mapped local sockaddr:"); + iwpm_print_sockaddr(remote_sockaddr, + "remote_info: Remote sockaddr:"); + iwpm_print_sockaddr(mapped_rem_sockaddr, + "remote_info: Mapped remote sockaddr:"); + return ret; +} +EXPORT_SYMBOL(iwpm_remote_info_cb); + /* netlink attribute policy for the received request for mapping info */ static const struct nla_policy resp_mapinfo_policy[IWPM_NLA_MAPINFO_REQ_MAX] = { [IWPM_NLA_MAPINFO_ULIB_NAME] = { .type = NLA_STRING, diff --git a/drivers/infiniband/core/iwpm_util.c b/drivers/infiniband/core/iwpm_util.c index 69e9f84c1605..a626795bf9c7 100644 --- a/drivers/infiniband/core/iwpm_util.c +++ b/drivers/infiniband/core/iwpm_util.c @@ -33,8 +33,10 @@ #include "iwpm_util.h" -#define IWPM_HASH_BUCKET_SIZE 512 -#define IWPM_HASH_BUCKET_MASK (IWPM_HASH_BUCKET_SIZE - 1) +#define IWPM_MAPINFO_HASH_SIZE 512 +#define IWPM_MAPINFO_HASH_MASK (IWPM_MAPINFO_HASH_SIZE - 1) +#define IWPM_REMINFO_HASH_SIZE 64 +#define IWPM_REMINFO_HASH_MASK (IWPM_REMINFO_HASH_SIZE - 1) static LIST_HEAD(iwpm_nlmsg_req_list); static DEFINE_SPINLOCK(iwpm_nlmsg_req_lock); @@ -42,31 +44,49 @@ static DEFINE_SPINLOCK(iwpm_nlmsg_req_lock); static struct hlist_head *iwpm_hash_bucket; static DEFINE_SPINLOCK(iwpm_mapinfo_lock); +static struct hlist_head *iwpm_reminfo_bucket; +static DEFINE_SPINLOCK(iwpm_reminfo_lock); + static DEFINE_MUTEX(iwpm_admin_lock); static struct iwpm_admin_data iwpm_admin; int iwpm_init(u8 nl_client) { + int ret = 0; if (iwpm_valid_client(nl_client)) return -EINVAL; mutex_lock(&iwpm_admin_lock); if (atomic_read(&iwpm_admin.refcount) == 0) { - iwpm_hash_bucket = kzalloc(IWPM_HASH_BUCKET_SIZE * + iwpm_hash_bucket = kzalloc(IWPM_MAPINFO_HASH_SIZE * sizeof(struct hlist_head), GFP_KERNEL); if (!iwpm_hash_bucket) { - mutex_unlock(&iwpm_admin_lock); + ret = -ENOMEM; pr_err("%s Unable to create mapinfo hash table\n", __func__); - return -ENOMEM; + goto init_exit; + } + iwpm_reminfo_bucket = kzalloc(IWPM_REMINFO_HASH_SIZE * + sizeof(struct hlist_head), GFP_KERNEL); + if (!iwpm_reminfo_bucket) { + kfree(iwpm_hash_bucket); + ret = -ENOMEM; + pr_err("%s Unable to create reminfo hash table\n", __func__); + goto init_exit; } } atomic_inc(&iwpm_admin.refcount); +init_exit: mutex_unlock(&iwpm_admin_lock); - iwpm_set_valid(nl_client, 1); - return 0; + if (!ret) { + iwpm_set_valid(nl_client, 1); + pr_debug("%s: Mapinfo and reminfo tables are created\n", + __func__); + } + return ret; } EXPORT_SYMBOL(iwpm_init); static void free_hash_bucket(void); +static void free_reminfo_bucket(void); int iwpm_exit(u8 nl_client) { @@ -81,7 +101,8 @@ int iwpm_exit(u8 nl_client) } if (atomic_dec_and_test(&iwpm_admin.refcount)) { free_hash_bucket(); - pr_debug("%s: Mapinfo hash table is destroyed\n", __func__); + free_reminfo_bucket(); + pr_debug("%s: Resources are destroyed\n", __func__); } mutex_unlock(&iwpm_admin_lock); iwpm_set_valid(nl_client, 0); @@ -89,7 +110,7 @@ int iwpm_exit(u8 nl_client) } EXPORT_SYMBOL(iwpm_exit); -static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage *, +static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage *, struct sockaddr_storage *); int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr, @@ -99,9 +120,10 @@ int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr, struct hlist_head *hash_bucket_head; struct iwpm_mapping_info *map_info; unsigned long flags; + int ret = -EINVAL; if (!iwpm_valid_client(nl_client)) - return -EINVAL; + return ret; map_info = kzalloc(sizeof(struct iwpm_mapping_info), GFP_KERNEL); if (!map_info) { pr_err("%s: Unable to allocate a mapping info\n", __func__); @@ -115,13 +137,16 @@ int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr, spin_lock_irqsave(&iwpm_mapinfo_lock, flags); if (iwpm_hash_bucket) { - hash_bucket_head = get_hash_bucket_head( + hash_bucket_head = get_mapinfo_hash_bucket( &map_info->local_sockaddr, &map_info->mapped_sockaddr); - hlist_add_head(&map_info->hlist_node, hash_bucket_head); + if (hash_bucket_head) { + hlist_add_head(&map_info->hlist_node, hash_bucket_head); + ret = 0; + } } spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags); - return 0; + return ret; } EXPORT_SYMBOL(iwpm_create_mapinfo); @@ -136,9 +161,12 @@ int iwpm_remove_mapinfo(struct sockaddr_storage *local_sockaddr, spin_lock_irqsave(&iwpm_mapinfo_lock, flags); if (iwpm_hash_bucket) { - hash_bucket_head = get_hash_bucket_head( + hash_bucket_head = get_mapinfo_hash_bucket( local_sockaddr, mapped_local_addr); + if (!hash_bucket_head) + goto remove_mapinfo_exit; + hlist_for_each_entry_safe(map_info, tmp_hlist_node, hash_bucket_head, hlist_node) { @@ -152,6 +180,7 @@ int iwpm_remove_mapinfo(struct sockaddr_storage *local_sockaddr, } } } +remove_mapinfo_exit: spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags); return ret; } @@ -166,7 +195,7 @@ static void free_hash_bucket(void) /* remove all the mapinfo data from the list */ spin_lock_irqsave(&iwpm_mapinfo_lock, flags); - for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) { + for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) { hlist_for_each_entry_safe(map_info, tmp_hlist_node, &iwpm_hash_bucket[i], hlist_node) { @@ -180,6 +209,96 @@ static void free_hash_bucket(void) spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags); } +static void free_reminfo_bucket(void) +{ + struct hlist_node *tmp_hlist_node; + struct iwpm_remote_info *rem_info; + unsigned long flags; + int i; + + /* remove all the remote info from the list */ + spin_lock_irqsave(&iwpm_reminfo_lock, flags); + for (i = 0; i < IWPM_REMINFO_HASH_SIZE; i++) { + hlist_for_each_entry_safe(rem_info, tmp_hlist_node, + &iwpm_reminfo_bucket[i], hlist_node) { + + hlist_del_init(&rem_info->hlist_node); + kfree(rem_info); + } + } + /* free the hash list */ + kfree(iwpm_reminfo_bucket); + iwpm_reminfo_bucket = NULL; + spin_unlock_irqrestore(&iwpm_reminfo_lock, flags); +} + +static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage *, + struct sockaddr_storage *); + +void iwpm_add_remote_info(struct iwpm_remote_info *rem_info) +{ + struct hlist_head *hash_bucket_head; + unsigned long flags; + + spin_lock_irqsave(&iwpm_reminfo_lock, flags); + if (iwpm_reminfo_bucket) { + hash_bucket_head = get_reminfo_hash_bucket( + &rem_info->mapped_loc_sockaddr, + &rem_info->mapped_rem_sockaddr); + if (hash_bucket_head) + hlist_add_head(&rem_info->hlist_node, hash_bucket_head); + } + spin_unlock_irqrestore(&iwpm_reminfo_lock, flags); +} + +int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr, + struct sockaddr_storage *mapped_rem_addr, + struct sockaddr_storage *remote_addr, + u8 nl_client) +{ + struct hlist_node *tmp_hlist_node; + struct hlist_head *hash_bucket_head; + struct iwpm_remote_info *rem_info = NULL; + unsigned long flags; + int ret = -EINVAL; + + if (!iwpm_valid_client(nl_client)) { + pr_info("%s: Invalid client = %d\n", __func__, nl_client); + return ret; + } + spin_lock_irqsave(&iwpm_reminfo_lock, flags); + if (iwpm_reminfo_bucket) { + hash_bucket_head = get_reminfo_hash_bucket( + mapped_loc_addr, + mapped_rem_addr); + if (!hash_bucket_head) + goto get_remote_info_exit; + hlist_for_each_entry_safe(rem_info, tmp_hlist_node, + hash_bucket_head, hlist_node) { + + if (!iwpm_compare_sockaddr(&rem_info->mapped_loc_sockaddr, + mapped_loc_addr) && + !iwpm_compare_sockaddr(&rem_info->mapped_rem_sockaddr, + mapped_rem_addr)) { + + memcpy(remote_addr, &rem_info->remote_sockaddr, + sizeof(struct sockaddr_storage)); + iwpm_print_sockaddr(remote_addr, + "get_remote_info: Remote sockaddr:"); + + hlist_del_init(&rem_info->hlist_node); + kfree(rem_info); + ret = 0; + break; + } + } + } +get_remote_info_exit: + spin_unlock_irqrestore(&iwpm_reminfo_lock, flags); + return ret; +} +EXPORT_SYMBOL(iwpm_get_remote_info); + struct iwpm_nlmsg_request *iwpm_get_nlmsg_request(__u32 nlmsg_seq, u8 nl_client, gfp_t gfp) { @@ -409,31 +528,54 @@ static u32 iwpm_ipv4_jhash(struct sockaddr_in *ipv4_sockaddr) return hash; } -static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage - *local_sockaddr, - struct sockaddr_storage - *mapped_sockaddr) +static int get_hash_bucket(struct sockaddr_storage *a_sockaddr, + struct sockaddr_storage *b_sockaddr, u32 *hash) { - u32 local_hash, mapped_hash, hash; + u32 a_hash, b_hash; - if (local_sockaddr->ss_family == AF_INET) { - local_hash = iwpm_ipv4_jhash((struct sockaddr_in *) local_sockaddr); - mapped_hash = iwpm_ipv4_jhash((struct sockaddr_in *) mapped_sockaddr); + if (a_sockaddr->ss_family == AF_INET) { + a_hash = iwpm_ipv4_jhash((struct sockaddr_in *) a_sockaddr); + b_hash = iwpm_ipv4_jhash((struct sockaddr_in *) b_sockaddr); - } else if (local_sockaddr->ss_family == AF_INET6) { - local_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) local_sockaddr); - mapped_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) mapped_sockaddr); + } else if (a_sockaddr->ss_family == AF_INET6) { + a_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) a_sockaddr); + b_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) b_sockaddr); } else { pr_err("%s: Invalid sockaddr family\n", __func__); - return NULL; + return -EINVAL; } - if (local_hash == mapped_hash) /* if port mapper isn't available */ - hash = local_hash; + if (a_hash == b_hash) /* if port mapper isn't available */ + *hash = a_hash; else - hash = jhash_2words(local_hash, mapped_hash, 0); + *hash = jhash_2words(a_hash, b_hash, 0); + return 0; +} - return &iwpm_hash_bucket[hash & IWPM_HASH_BUCKET_MASK]; +static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage + *local_sockaddr, struct sockaddr_storage + *mapped_sockaddr) +{ + u32 hash; + int ret; + + ret = get_hash_bucket(local_sockaddr, mapped_sockaddr, &hash); + if (ret) + return NULL; + return &iwpm_hash_bucket[hash & IWPM_MAPINFO_HASH_MASK]; +} + +static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage + *mapped_loc_sockaddr, struct sockaddr_storage + *mapped_rem_sockaddr) +{ + u32 hash; + int ret; + + ret = get_hash_bucket(mapped_loc_sockaddr, mapped_rem_sockaddr, &hash); + if (ret) + return NULL; + return &iwpm_reminfo_bucket[hash & IWPM_REMINFO_HASH_MASK]; } static int send_mapinfo_num(u32 mapping_num, u8 nl_client, int iwpm_pid) @@ -512,7 +654,7 @@ int iwpm_send_mapinfo(u8 nl_client, int iwpm_pid) } skb_num++; spin_lock_irqsave(&iwpm_mapinfo_lock, flags); - for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) { + for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) { hlist_for_each_entry(map_info, &iwpm_hash_bucket[i], hlist_node) { if (map_info->nl_client != nl_client) @@ -595,7 +737,7 @@ int iwpm_mapinfo_available(void) spin_lock_irqsave(&iwpm_mapinfo_lock, flags); if (iwpm_hash_bucket) { - for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) { + for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) { if (!hlist_empty(&iwpm_hash_bucket[i])) { full_bucket = 1; break; diff --git a/drivers/infiniband/core/iwpm_util.h b/drivers/infiniband/core/iwpm_util.h index 9777c869a140..ee2d9ff095be 100644 --- a/drivers/infiniband/core/iwpm_util.h +++ b/drivers/infiniband/core/iwpm_util.h @@ -76,6 +76,14 @@ struct iwpm_mapping_info { u8 nl_client; }; +struct iwpm_remote_info { + struct hlist_node hlist_node; + struct sockaddr_storage remote_sockaddr; + struct sockaddr_storage mapped_loc_sockaddr; + struct sockaddr_storage mapped_rem_sockaddr; + u8 nl_client; +}; + struct iwpm_admin_data { atomic_t refcount; atomic_t nlmsg_seq; @@ -127,6 +135,13 @@ int iwpm_wait_complete_req(struct iwpm_nlmsg_request *nlmsg_request); */ int iwpm_get_nlmsg_seq(void); +/** + * iwpm_add_reminfo - Add remote address info of the connecting peer + * to the remote info hash table + * @reminfo: The remote info to be added + */ +void iwpm_add_remote_info(struct iwpm_remote_info *reminfo); + /** * iwpm_valid_client - Check if the port mapper client is valid * @nl_client: The index of the netlink client diff --git a/include/rdma/iw_portmap.h b/include/rdma/iw_portmap.h index 928b2775e992..fda31673a562 100644 --- a/include/rdma/iw_portmap.h +++ b/include/rdma/iw_portmap.h @@ -147,6 +147,16 @@ int iwpm_add_mapping_cb(struct sk_buff *, struct netlink_callback *); */ int iwpm_add_and_query_mapping_cb(struct sk_buff *, struct netlink_callback *); +/** + * iwpm_remote_info_cb - Process remote connecting peer address info, which + * the port mapper has received from the connecting peer + * + * @cb: Contains the received message (payload and netlink header) + * + * Stores the IPv4/IPv6 address info in a hash table + */ +int iwpm_remote_info_cb(struct sk_buff *, struct netlink_callback *); + /** * iwpm_mapping_error_cb - Process port mapper notification for error * @@ -174,6 +184,21 @@ int iwpm_mapping_info_cb(struct sk_buff *, struct netlink_callback *); */ int iwpm_ack_mapping_info_cb(struct sk_buff *, struct netlink_callback *); +/** + * iwpm_get_remote_info - Get the remote connecting peer address info + * + * @mapped_loc_addr: Mapped local address of the listening peer + * @mapped_rem_addr: Mapped remote address of the connecting peer + * @remote_addr: To store the remote address of the connecting peer + * @nl_client: The index of the netlink client + * + * The remote address info is retrieved and provided to the client in + * the remote_addr. After that it is removed from the hash table + */ +int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr, + struct sockaddr_storage *mapped_rem_addr, + struct sockaddr_storage *remote_addr, u8 nl_client); + /** * iwpm_create_mapinfo - Store local and mapped IPv4/IPv6 address * info in a hash table diff --git a/include/uapi/rdma/rdma_netlink.h b/include/uapi/rdma/rdma_netlink.h index de69170a30ce..6e4bb4270ca2 100644 --- a/include/uapi/rdma/rdma_netlink.h +++ b/include/uapi/rdma/rdma_netlink.h @@ -37,6 +37,7 @@ enum { RDMA_NL_IWPM_ADD_MAPPING, RDMA_NL_IWPM_QUERY_MAPPING, RDMA_NL_IWPM_REMOVE_MAPPING, + RDMA_NL_IWPM_REMOTE_INFO, RDMA_NL_IWPM_HANDLE_ERR, RDMA_NL_IWPM_MAPINFO, RDMA_NL_IWPM_MAPINFO_NUM, From 230da36ae919e690dbcc44d1be8a2154214c6e36 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Tue, 21 Apr 2015 16:28:25 -0400 Subject: [PATCH 245/652] RDMA/nes: Report the actual address of the remote connecting peer Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper and report the address info to the user space application at the time of connection establishment Signed-off-by: Tatyana Nikolova Signed-off-by: Doug Ledford --- drivers/infiniband/hw/nes/nes.c | 1 + drivers/infiniband/hw/nes/nes_cm.c | 63 ++++++++++++++++++++++-------- 2 files changed, 48 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 3b2a6dc8ea99..9f9d5c563a61 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -116,6 +116,7 @@ static struct ibnl_client_cbs nes_nl_cb_table[] = { [RDMA_NL_IWPM_REG_PID] = {.dump = iwpm_register_pid_cb}, [RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb}, [RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb}, + [RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb}, [RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb}, [RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb}, [RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb} diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 6f09a72e78d7..72b43417cbe3 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -596,27 +596,52 @@ static void nes_form_reg_msg(struct nes_vnic *nesvnic, memcpy(pm_msg->if_name, nesvnic->netdev->name, IWPM_IFNAME_SIZE); } +static void record_sockaddr_info(struct sockaddr_storage *addr_info, + nes_addr_t *ip_addr, u16 *port_num) +{ + struct sockaddr_in *in_addr = (struct sockaddr_in *)addr_info; + + if (in_addr->sin_family == AF_INET) { + *ip_addr = ntohl(in_addr->sin_addr.s_addr); + *port_num = ntohs(in_addr->sin_port); + } +} + /* * nes_record_pm_msg - Save the received mapping info */ static void nes_record_pm_msg(struct nes_cm_info *cm_info, struct iwpm_sa_data *pm_msg) { - struct sockaddr_in *mapped_loc_addr = - (struct sockaddr_in *)&pm_msg->mapped_loc_addr; - struct sockaddr_in *mapped_rem_addr = - (struct sockaddr_in *)&pm_msg->mapped_rem_addr; + record_sockaddr_info(&pm_msg->mapped_loc_addr, + &cm_info->mapped_loc_addr, &cm_info->mapped_loc_port); - if (mapped_loc_addr->sin_family == AF_INET) { - cm_info->mapped_loc_addr = - ntohl(mapped_loc_addr->sin_addr.s_addr); - cm_info->mapped_loc_port = ntohs(mapped_loc_addr->sin_port); - } - if (mapped_rem_addr->sin_family == AF_INET) { - cm_info->mapped_rem_addr = - ntohl(mapped_rem_addr->sin_addr.s_addr); - cm_info->mapped_rem_port = ntohs(mapped_rem_addr->sin_port); - } + record_sockaddr_info(&pm_msg->mapped_rem_addr, + &cm_info->mapped_rem_addr, &cm_info->mapped_rem_port); +} + +/* + * nes_get_reminfo - Get the address info of the remote connecting peer + */ +static int nes_get_remote_addr(struct nes_cm_node *cm_node) +{ + struct sockaddr_storage mapped_loc_addr, mapped_rem_addr; + struct sockaddr_storage remote_addr; + int ret; + + nes_create_sockaddr(htonl(cm_node->mapped_loc_addr), + htons(cm_node->mapped_loc_port), &mapped_loc_addr); + nes_create_sockaddr(htonl(cm_node->mapped_rem_addr), + htons(cm_node->mapped_rem_port), &mapped_rem_addr); + + ret = iwpm_get_remote_info(&mapped_loc_addr, &mapped_rem_addr, + &remote_addr, RDMA_NL_NES); + if (ret) + nes_debug(NES_DBG_CM, "Unable to find remote peer address info\n"); + else + record_sockaddr_info(&remote_addr, &cm_node->rem_addr, + &cm_node->rem_port); + return ret; } /** @@ -1566,9 +1591,14 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core, return NULL; /* set our node specific transport info */ - cm_node->loc_addr = cm_info->loc_addr; + if (listener) { + cm_node->loc_addr = listener->loc_addr; + cm_node->loc_port = listener->loc_port; + } else { + cm_node->loc_addr = cm_info->loc_addr; + cm_node->loc_port = cm_info->loc_port; + } cm_node->rem_addr = cm_info->rem_addr; - cm_node->loc_port = cm_info->loc_port; cm_node->rem_port = cm_info->rem_port; cm_node->mapped_loc_addr = cm_info->mapped_loc_addr; @@ -2151,6 +2181,7 @@ static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, cm_node->state = NES_CM_STATE_ESTABLISHED; if (datasize) { cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize; + nes_get_remote_addr(cm_node); handle_rcv_mpa(cm_node, skb); } else { /* rcvd ACK only */ dev_kfree_skb_any(skb); From 5b6b8fe64053b2649660ded2f3c5be25ebddbfdb Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 21 Apr 2015 16:28:41 -0400 Subject: [PATCH 246/652] RDMA/cxgb4: Report the actual address of the remote connecting peer Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper Also setup the passive side endpoint to correctly display the actual and mapped addresses for the new connection. Signed-off-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 54 +++++++++++++++++++++++++--- drivers/infiniband/hw/cxgb4/device.c | 1 + 2 files changed, 51 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 6fb31bacd5b4..3c3b00e4e7af 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -583,6 +583,22 @@ static void c4iw_record_pm_msg(struct c4iw_ep *ep, sizeof(ep->com.mapped_remote_addr)); } +static int get_remote_addr(struct c4iw_ep *ep) +{ + int ret; + + print_addr(&ep->com, __func__, "get_remote_addr"); + + ret = iwpm_get_remote_info(&ep->com.mapped_local_addr, + &ep->com.mapped_remote_addr, + &ep->com.remote_addr, RDMA_NL_C4IW); + if (ret) + pr_info(MOD "Unable to find remote peer addr info - err %d\n", + ret); + + return ret; +} + static void best_mtu(const unsigned short *mtus, unsigned short mtu, unsigned int *idx, int use_ts, int ipv6) { @@ -2352,27 +2368,57 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) state_set(&child_ep->com, CONNECTING); child_ep->com.dev = dev; child_ep->com.cm_id = NULL; + + /* + * The mapped_local and mapped_remote addresses get setup with + * the actual 4-tuple. The local address will be based on the + * actual local address of the connection, but on the port number + * of the parent listening endpoint. The remote address is + * setup based on a query to the IWPM since we don't know what it + * originally was before mapping. If no mapping was done, then + * mapped_remote == remote, and mapped_local == local. + */ if (iptype == 4) { struct sockaddr_in *sin = (struct sockaddr_in *) - &child_ep->com.local_addr; + &child_ep->com.mapped_local_addr; + sin->sin_family = PF_INET; sin->sin_port = local_port; sin->sin_addr.s_addr = *(__be32 *)local_ip; - sin = (struct sockaddr_in *)&child_ep->com.remote_addr; + + sin = (struct sockaddr_in *)&child_ep->com.local_addr; + sin->sin_family = PF_INET; + sin->sin_port = ((struct sockaddr_in *) + &parent_ep->com.local_addr)->sin_port; + sin->sin_addr.s_addr = *(__be32 *)local_ip; + + sin = (struct sockaddr_in *)&child_ep->com.mapped_remote_addr; sin->sin_family = PF_INET; sin->sin_port = peer_port; sin->sin_addr.s_addr = *(__be32 *)peer_ip; } else { struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) - &child_ep->com.local_addr; + &child_ep->com.mapped_local_addr; + sin6->sin6_family = PF_INET6; sin6->sin6_port = local_port; memcpy(sin6->sin6_addr.s6_addr, local_ip, 16); - sin6 = (struct sockaddr_in6 *)&child_ep->com.remote_addr; + + sin6 = (struct sockaddr_in6 *)&child_ep->com.local_addr; + sin6->sin6_family = PF_INET6; + sin6->sin6_port = ((struct sockaddr_in6 *) + &parent_ep->com.local_addr)->sin6_port; + memcpy(sin6->sin6_addr.s6_addr, local_ip, 16); + + sin6 = (struct sockaddr_in6 *)&child_ep->com.mapped_remote_addr; sin6->sin6_family = PF_INET6; sin6->sin6_port = peer_port; memcpy(sin6->sin6_addr.s6_addr, peer_ip, 16); } + memcpy(&child_ep->com.remote_addr, &child_ep->com.mapped_remote_addr, + sizeof(child_ep->com.remote_addr)); + get_remote_addr(child_ep); + c4iw_get_ep(&parent_ep->com); child_ep->parent_ep = parent_ep; child_ep->tos = PASS_OPEN_TOS_G(ntohl(req->tos_stid)); diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 83209bb38285..1ffbd038c0ae 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -93,6 +93,7 @@ static struct ibnl_client_cbs c4iw_nl_cb_table[] = { [RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb}, [RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb}, [RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb}, + [RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb}, [RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb}, [RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb} }; From c1d383b5785b1e0fb5fb862864712a7208219e6a Mon Sep 17 00:00:00 2001 From: Guy Shapiro Date: Wed, 15 Apr 2015 18:17:56 +0300 Subject: [PATCH 247/652] IB/core: dma map/unmap locking optimizations Currently, while mapping or unmapping pages for ODP, the umem mutex is locked and unlocked once for each page. Such lock/unlock operation take few tens to hundreds of nsecs. This makes a significant impact when mapping or unmapping few MBs of memory. To avoid this, the mutex should be locked only once per operation, and not per page. Signed-off-by: Guy Shapiro Acked-by: Shachar Raindel Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/core/umem_odp.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c index 8b8cc6fa0ab0..aba47398880d 100644 --- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -446,7 +446,6 @@ static int ib_umem_odp_map_dma_single_page( int remove_existing_mapping = 0; int ret = 0; - mutex_lock(&umem->odp_data->umem_mutex); /* * Note: we avoid writing if seq is different from the initial seq, to * handle case of a racing notifier. This check also allows us to bail @@ -479,8 +478,6 @@ static int ib_umem_odp_map_dma_single_page( } out: - mutex_unlock(&umem->odp_data->umem_mutex); - /* On Demand Paging - avoid pinning the page */ if (umem->context->invalidate_range || !stored_page) put_page(page); @@ -586,6 +583,7 @@ int ib_umem_odp_map_dma_pages(struct ib_umem *umem, u64 user_virt, u64 bcnt, bcnt -= min_t(size_t, npages << PAGE_SHIFT, bcnt); user_virt += npages << PAGE_SHIFT; + mutex_lock(&umem->odp_data->umem_mutex); for (j = 0; j < npages; ++j) { ret = ib_umem_odp_map_dma_single_page( umem, k, base_virt_addr, local_page_list[j], @@ -594,6 +592,7 @@ int ib_umem_odp_map_dma_pages(struct ib_umem *umem, u64 user_virt, u64 bcnt, break; k++; } + mutex_unlock(&umem->odp_data->umem_mutex); if (ret < 0) { /* Release left over pages when handling errors. */ @@ -633,9 +632,9 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, * faults from completion. We might be racing with other * invalidations, so we must make sure we free each page only * once. */ + mutex_lock(&umem->odp_data->umem_mutex); for (addr = virt; addr < bound; addr += (u64)umem->page_size) { idx = (addr - ib_umem_start(umem)) / PAGE_SIZE; - mutex_lock(&umem->odp_data->umem_mutex); if (umem->odp_data->page_list[idx]) { struct page *page = umem->odp_data->page_list[idx]; struct page *head_page = compound_head(page); @@ -663,7 +662,7 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, umem->odp_data->page_list[idx] = NULL; umem->odp_data->dma_list[idx] = 0; } - mutex_unlock(&umem->odp_data->umem_mutex); } + mutex_unlock(&umem->odp_data->umem_mutex); } EXPORT_SYMBOL(ib_umem_odp_unmap_dma_pages); From 325ad0617adaf163e32dd2d857b90baf65a25b5b Mon Sep 17 00:00:00 2001 From: Guy Shapiro Date: Wed, 15 Apr 2015 18:17:57 +0300 Subject: [PATCH 248/652] IB/core: dma unmap optimizations While unmapping an ODP writable page, the dirty bit of the page is set. In order to do so, the head of the compound page is found. Currently, the compound head is found even on non-writable pages, where it is never used, leading to unnecessary cpu barrier that impacts performance. This patch moves the search for the compound head to be done only when needed. Signed-off-by: Guy Shapiro Acked-by: Shachar Raindel Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/core/umem_odp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c index aba47398880d..40becdb3196e 100644 --- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -637,7 +637,6 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, idx = (addr - ib_umem_start(umem)) / PAGE_SIZE; if (umem->odp_data->page_list[idx]) { struct page *page = umem->odp_data->page_list[idx]; - struct page *head_page = compound_head(page); dma_addr_t dma = umem->odp_data->dma_list[idx]; dma_addr_t dma_addr = dma & ODP_DMA_ADDR_MASK; @@ -645,7 +644,8 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, ib_dma_unmap_page(dev, dma_addr, PAGE_SIZE, DMA_BIDIRECTIONAL); - if (dma & ODP_WRITE_ALLOWED_BIT) + if (dma & ODP_WRITE_ALLOWED_BIT) { + struct page *head_page = compound_head(page); /* * set_page_dirty prefers being called with * the page lock. However, MMU notifiers are @@ -656,6 +656,7 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, * be removed. */ set_page_dirty(head_page); + } /* on demand pinning support */ if (!umem->context->invalidate_range) put_page(page); From 87a26e976cb93e26742224bdd39f51f7861aa9b7 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 21 Apr 2015 14:50:34 -0700 Subject: [PATCH 249/652] IB/qib: add acounting for MTRR There is no good reason not to, we eventually delete it as well. Cc: Toshi Kani Cc: Suresh Siddha Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Juergen Gross Cc: Daniel Vetter Cc: Andy Lutomirski Cc: Dave Airlie Cc: Antonino Daplas Cc: Jean-Christophe Plagniol-Villard Cc: Tomi Valkeinen Cc: Mike Marciniszyn Cc: Roland Dreier Cc: Sean Hefty Cc: Hal Rosenstock Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qib/qib_wc_x86_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_wc_x86_64.c b/drivers/infiniband/hw/qib/qib_wc_x86_64.c index 81b225f2300a..fe0850ac6883 100644 --- a/drivers/infiniband/hw/qib/qib_wc_x86_64.c +++ b/drivers/infiniband/hw/qib/qib_wc_x86_64.c @@ -118,7 +118,7 @@ int qib_enable_wc(struct qib_devdata *dd) if (!ret) { int cookie; - cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0); + cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 1); if (cookie < 0) { { qib_devinfo(dd->pcidev, From d4988623cc605131bed8c77f007082c3555c39ee Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 22 Apr 2015 11:38:24 -0700 Subject: [PATCH 250/652] IB/qib: use arch_phys_wc_add() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver already makes use of ioremap_wc() on PIO buffers, so convert it to use arch_phys_wc_add(). The qib driver uses a mmap() special case for when PAT is not used, this behaviour used to be determined with a module parameter but since we have been asked to just remove that module parameter this checks for the WC cookie, if not set we can assume PAT was used. If its set we do what we used to do for the mmap for when MTRR was enabled. The removal of the module parameter is OK given that Andy notes that even if users of module parameter are still around it will not prevent loading of the module on recent kernels. Cc: Doug Ledford Cc: Toshi Kani Cc: Rickard Strandqvist Cc: Mike Marciniszyn Cc: Roland Dreier Cc: Sean Hefty Cc: Hal Rosenstock Cc: Dennis Dalessandro Cc: Andy Lutomirski Cc: Suresh Siddha Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Juergen Gross Cc: Daniel Vetter Cc: Dave Airlie Cc: Bjorn Helgaas Cc: Antonino Daplas Cc: Jean-Christophe Plagniol-Villard Cc: Tomi Valkeinen Cc: Dave Hansen Cc: Arnd Bergmann Cc: Michael S. Tsirkin Cc: Stefan Bader Cc: konrad.wilk@oracle.com Cc: ville.syrjala@linux.intel.com Cc: david.vrabel@citrix.com Cc: jbeulich@suse.com Cc: Roger Pau Monné Cc: infinipath@intel.com Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xensource.com Signed-off-by: Luis R. Rodriguez Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qib/qib.h | 1 - drivers/infiniband/hw/qib/qib_file_ops.c | 3 +- drivers/infiniband/hw/qib/qib_iba6120.c | 8 ++--- drivers/infiniband/hw/qib/qib_iba7220.c | 8 ++--- drivers/infiniband/hw/qib/qib_iba7322.c | 41 +++++++++++------------ drivers/infiniband/hw/qib/qib_init.c | 26 ++++---------- drivers/infiniband/hw/qib/qib_wc_x86_64.c | 31 +++-------------- 7 files changed, 39 insertions(+), 79 deletions(-) diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index ffd48bfc4923..ba5173e24973 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -1136,7 +1136,6 @@ extern struct qib_devdata *qib_lookup(int unit); extern u32 qib_cpulist_count; extern unsigned long *qib_cpulist; -extern unsigned qib_wc_pat; extern unsigned qib_cc_table_size; int qib_init(struct qib_devdata *, int); int init_chip_wc_pat(struct qib_devdata *dd, u32); diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index 9ea6c440a00c..725881890c4a 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -835,7 +835,8 @@ static int mmap_piobufs(struct vm_area_struct *vma, vma->vm_flags &= ~VM_MAYREAD; vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; - if (qib_wc_pat) + /* We used PAT if wc_cookie == 0 */ + if (!dd->wc_cookie) vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT, diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c index 0d2ba59af30a..4b927809d1a1 100644 --- a/drivers/infiniband/hw/qib/qib_iba6120.c +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -3315,11 +3315,9 @@ static int init_6120_variables(struct qib_devdata *dd) qib_6120_config_ctxts(dd); qib_set_ctxtcnt(dd); - if (qib_wc_pat) { - ret = init_chip_wc_pat(dd, 0); - if (ret) - goto bail; - } + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; set_6120_baseaddrs(dd); /* set chip access pointers now */ ret = 0; diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index 22affda8af88..00b2af211157 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -4126,11 +4126,9 @@ static int qib_init_7220_variables(struct qib_devdata *dd) qib_7220_config_ctxts(dd); qib_set_ctxtcnt(dd); /* needed for PAT setup */ - if (qib_wc_pat) { - ret = init_chip_wc_pat(dd, 0); - if (ret) - goto bail; - } + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; set_7220_baseaddrs(dd); /* set chip access pointers now */ ret = 0; diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index ef97b71c8f7d..f32b4628e991 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -6429,6 +6429,7 @@ static int qib_init_7322_variables(struct qib_devdata *dd) unsigned features, pidx, sbufcnt; int ret, mtu; u32 sbufs, updthresh; + resource_size_t vl15off; /* pport structs are contiguous, allocated after devdata */ ppd = (struct qib_pportdata *)(dd + 1); @@ -6677,29 +6678,27 @@ static int qib_init_7322_variables(struct qib_devdata *dd) qib_7322_config_ctxts(dd); qib_set_ctxtcnt(dd); - if (qib_wc_pat) { - resource_size_t vl15off; - /* - * We do not set WC on the VL15 buffers to avoid - * a rare problem with unaligned writes from - * interrupt-flushed store buffers, so we need - * to map those separately here. We can't solve - * this for the rarely used mtrr case. - */ - ret = init_chip_wc_pat(dd, 0); - if (ret) - goto bail; + /* + * We do not set WC on the VL15 buffers to avoid + * a rare problem with unaligned writes from + * interrupt-flushed store buffers, so we need + * to map those separately here. We can't solve + * this for the rarely used mtrr case. + */ + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; - /* vl15 buffers start just after the 4k buffers */ - vl15off = dd->physaddr + (dd->piobufbase >> 32) + - dd->piobcnt4k * dd->align4k; - dd->piovl15base = ioremap_nocache(vl15off, - NUM_VL15_BUFS * dd->align4k); - if (!dd->piovl15base) { - ret = -ENOMEM; - goto bail; - } + /* vl15 buffers start just after the 4k buffers */ + vl15off = dd->physaddr + (dd->piobufbase >> 32) + + dd->piobcnt4k * dd->align4k; + dd->piovl15base = ioremap_nocache(vl15off, + NUM_VL15_BUFS * dd->align4k); + if (!dd->piovl15base) { + ret = -ENOMEM; + goto bail; } + qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ ret = 0; diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c index 2ee36953e234..7e00470adc30 100644 --- a/drivers/infiniband/hw/qib/qib_init.c +++ b/drivers/infiniband/hw/qib/qib_init.c @@ -91,15 +91,6 @@ MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port"); unsigned qib_cc_table_size; module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO); MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984"); -/* - * qib_wc_pat parameter: - * 0 is WC via MTRR - * 1 is WC via PAT - * If PAT initialization fails, code reverts back to MTRR - */ -unsigned qib_wc_pat = 1; /* default (1) is to use PAT, not MTRR */ -module_param_named(wc_pat, qib_wc_pat, uint, S_IRUGO); -MODULE_PARM_DESC(wc_pat, "enable write-combining via PAT mechanism"); static void verify_interrupt(unsigned long); @@ -1377,8 +1368,7 @@ static void cleanup_device_data(struct qib_devdata *dd) spin_unlock(&dd->pport[pidx].cc_shadow_lock); } - if (!qib_wc_pat) - qib_disable_wc(dd); + qib_disable_wc(dd); if (dd->pioavailregs_dma) { dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, @@ -1547,14 +1537,12 @@ static int qib_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto bail; } - if (!qib_wc_pat) { - ret = qib_enable_wc(dd); - if (ret) { - qib_dev_err(dd, - "Write combining not enabled (err %d): performance may be poor\n", - -ret); - ret = 0; - } + ret = qib_enable_wc(dd); + if (ret) { + qib_dev_err(dd, + "Write combining not enabled (err %d): performance may be poor\n", + -ret); + ret = 0; } qib_verify_pioperf(dd); diff --git a/drivers/infiniband/hw/qib/qib_wc_x86_64.c b/drivers/infiniband/hw/qib/qib_wc_x86_64.c index fe0850ac6883..6d61ef98721c 100644 --- a/drivers/infiniband/hw/qib/qib_wc_x86_64.c +++ b/drivers/infiniband/hw/qib/qib_wc_x86_64.c @@ -116,21 +116,9 @@ int qib_enable_wc(struct qib_devdata *dd) } if (!ret) { - int cookie; - - cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 1); - if (cookie < 0) { - { - qib_devinfo(dd->pcidev, - "mtrr_add() WC for PIO bufs failed (%d)\n", - cookie); - ret = -EINVAL; - } - } else { - dd->wc_cookie = cookie; - dd->wc_base = (unsigned long) pioaddr; - dd->wc_len = (unsigned long) piolen; - } + dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen); + if (dd->wc_cookie < 0) + ret = -EINVAL; } return ret; @@ -142,18 +130,7 @@ int qib_enable_wc(struct qib_devdata *dd) */ void qib_disable_wc(struct qib_devdata *dd) { - if (dd->wc_cookie) { - int r; - - r = mtrr_del(dd->wc_cookie, dd->wc_base, - dd->wc_len); - if (r < 0) - qib_devinfo(dd->pcidev, - "mtrr_del(%lx, %lx, %lx) failed: %d\n", - dd->wc_cookie, dd->wc_base, - dd->wc_len, r); - dd->wc_cookie = 0; /* even on failure */ - } + arch_phys_wc_del(dd->wc_cookie); } /** From d9e7eb152bb24f06028a0d10b054e39ebdf14f9c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 10 Apr 2015 23:58:24 +0200 Subject: [PATCH 251/652] iommu/rockchip: Fix build without CONFIG_OF The rockchip iommu driver references its of_device_id table from the init function, which fails to build when the table is undefined: iommu/rockchip-iommu.c: In function 'rk_iommu_init': iommu/rockchip-iommu.c:1029:35: error: 'rk_iommu_dt_ids' undeclared (first use in this function) np = of_find_matching_node(NULL, rk_iommu_dt_ids); This removes the #ifdef and the corresponding of_match_ptr wrapper to make it build both with CONFIG_OF enabled or disabled. Signed-off-by: Arnd Bergmann Fixes: 425061b0f5074 ("iommu/rockchip: Play nice in multi-platform builds") Reviewed-by: Thierry Reding Reviewed-by: Heiko Stuebner Signed-off-by: Joerg Roedel --- drivers/iommu/rockchip-iommu.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c index 4015560bf486..cab214544237 100644 --- a/drivers/iommu/rockchip-iommu.c +++ b/drivers/iommu/rockchip-iommu.c @@ -1004,20 +1004,18 @@ static int rk_iommu_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static const struct of_device_id rk_iommu_dt_ids[] = { { .compatible = "rockchip,iommu" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, rk_iommu_dt_ids); -#endif static struct platform_driver rk_iommu_driver = { .probe = rk_iommu_probe, .remove = rk_iommu_remove, .driver = { .name = "rk_iommu", - .of_match_table = of_match_ptr(rk_iommu_dt_ids), + .of_match_table = rk_iommu_dt_ids, }, }; From d73a824acc705571c0f47596326d7967fba9a1d9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 4 May 2015 14:35:01 -0400 Subject: [PATCH 252/652] drm/radeon: don't setup audio on asics that don't support it bug: https://bugzilla.kernel.org/show_bug.cgi?id=97701 Reported-by: Mikael Pettersson Tested-by: Mikael Pettersson Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_audio.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c index 8b82abb78df1..dcb779647c57 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.c +++ b/drivers/gpu/drm/radeon/radeon_audio.c @@ -464,6 +464,10 @@ void radeon_audio_detect(struct drm_connector *connector, return; rdev = connector->encoder->dev->dev_private; + + if (!radeon_audio_chipset_supported(rdev)) + return; + radeon_encoder = to_radeon_encoder(connector->encoder); dig = radeon_encoder->enc_priv; From 11fa7df1e12f19571bdce4580cbc63a8cb3e9e85 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 May 2015 12:14:03 +0300 Subject: [PATCH 253/652] ata: select DW_DMAC in case of SATA_DWC Since sata_dwc_460ex.c was moved to generic DMA driver we have to ensure that user can still compile it. Fixes: 8b3444852a2b (sata_dwc_460ex: move to generic DMA driver) Signed-off-by: Andy Shevchenko Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ee5209fb82b2..9dca4b995be0 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -270,6 +270,7 @@ config ATA_PIIX config SATA_DWC tristate "DesignWare Cores SATA support" depends on 460EX + select DW_DMAC help This option enables support for the on-chip SATA controller of the AppliedMicro processor 460EX. From 6f317cfe42c9d8a7c9c1a327d2f1bcc517a3cd91 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 12 Apr 2015 21:10:35 +0200 Subject: [PATCH 254/652] drm/i915: Assume dual channel LVDS if pixel clock necessitates it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Single channel LVDS maxes out at 112 MHz, anything above must be dual channel. This avoids the need to specify i915.lvds_channel_mode=2 on all 17" MacBook Pro models with i915 graphics since they had 1920x1200 (193 MHz), plus those 15" pre-retina models which had a resolution of 1680x1050 (119 MHz) as a BTO option. Source for 112 MHz limit of single channel LVDS is section 2.3 of: https://01.org/linuxgraphics/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf v2: Avoid hardcoding 17" models by assuming dual channel LVDS if the resolution necessitates it, suggested by Jani Nikula. v3: Fix typo, thanks Joonas Lahtinen. v4: Split commit in two, suggested by Ville Syrjälä. Signed-off-by: Lukas Wunner Tested-by: Lukas Wunner Reviewed-by: Ville Syrjälä Cc: stable@vger.kernel.org [Jani: included spec reference into the commit message] Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lvds.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 5abda1d2c018..ee621e335d04 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -848,6 +848,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder) if (i915.lvds_channel_mode > 0) return i915.lvds_channel_mode == 2; + /* single channel LVDS is limited to 112 MHz */ + if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock + > 112999) + return true; + if (dmi_check_system(intel_dual_link_lvds)) return true; @@ -1111,6 +1116,8 @@ void intel_lvds_init(struct drm_device *dev) out: mutex_unlock(&dev->mode_config.mutex); + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); + lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder); DRM_DEBUG_KMS("detected %s-link lvds configuration\n", lvds_encoder->is_dual_link ? "dual" : "single"); @@ -1125,7 +1132,6 @@ out: } drm_connector_register(connector); - intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); intel_panel_setup_backlight(connector, INVALID_PIPE); return; From 3916e3fd81021fb795bfbdb17f375b6b3685bced Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Mon, 4 May 2015 15:06:49 +0200 Subject: [PATCH 255/652] drm/i915: Add missing MacBook Pro models with dual channel LVDS Single channel LVDS maxes out at 112 MHz. The 15" pre-retina models shipped with 1440x900 (106 MHz) by default or 1680x1050 (119 MHz) as a BTO option, both versions used dual channel LVDS even though the smaller one would have fit into a single channel. Notes: Bug report showing that the MacBookPro8,2 with 1440x900 uses dual channel LVDS (this lead to it being hardcoded in intel_lvds.c by Daniel Vetter with commit 618563e3945b9d0864154bab3c607865b557cecc): https://bugzilla.kernel.org/show_bug.cgi?id=42842 If i915.lvds_channel_mode=2 is missing even though the machine needs it, every other vertical line is white and consequently, only the left half of the screen is visible (verified by myself on a MacBookPro9,1). Forum posting concerning a MacBookPro6,2 with 1440x900, author is using i915.lvds_channel_mode=2 on the kernel command line, proving that the machine uses dual channels: https://bbs.archlinux.org/viewtopic.php?id=185770 Chi Mei N154C6-L04 with 1440x900 is a replacement panel for all MacBook Pro "A1286" models, and that model number encompasses the MacBookPro6,2 / 8,2 / 9,1. Page 17 of the panel's datasheet shows it's driven with dual channel LVDS: http://www.ebay.com/itm/-/400690878560 http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1286 http://www.taopanel.com/chimei/datasheet/N154C6-L04.pdf Those three 15" models, MacBookPro6,2 / 8,2 / 9,1, are the only ones with i915 graphics and dual channel LVDS, so that list should be complete. And the 8,2 is already in intel_lvds.c. Possible motivation to use dual channel LVDS even on the 1440x900 models: Reduce the number of different parts, i.e. use identical logic boards and display cabling on both versions and the only differing component is the panel. Signed-off-by: Lukas Wunner Acked-by: Jani Nikula Cc: stable@vger.kernel.org [Jani: included notes in the commit message for posterity] Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lvds.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index ee621e335d04..fbcc7dff0d63 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -813,12 +813,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id) static const struct dmi_system_id intel_dual_link_lvds[] = { { .callback = intel_dual_link_lvds_callback, - .ident = "Apple MacBook Pro (Core i5/i7 Series)", + .ident = "Apple MacBook Pro 15\" (2010)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6,2"), + }, + }, + { + .callback = intel_dual_link_lvds_callback, + .ident = "Apple MacBook Pro 15\" (2011)", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"), }, }, + { + .callback = intel_dual_link_lvds_callback, + .ident = "Apple MacBook Pro 15\" (2012)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro9,1"), + }, + }, { } /* terminating entry */ }; From d67e199611b986b345ea3087ee2e4a15da1c98b3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Apr 2015 16:46:28 +0300 Subject: [PATCH 256/652] efi: Fix error handling in add_sysfs_runtime_map_entry() I spotted two (difficult to hit) bugs while reviewing this. 1) There is a double free bug because we unregister "map_kset" in add_sysfs_runtime_map_entry() and also efi_runtime_map_init(). 2) If we fail to allocate "entry" then we should return ERR_PTR(-ENOMEM) instead of NULL. Signed-off-by: Dan Carpenter Cc: Dave Young Cc: Guangyu Sun Cc: Signed-off-by: Matt Fleming --- drivers/firmware/efi/runtime-map.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/efi/runtime-map.c b/drivers/firmware/efi/runtime-map.c index 87b8e3b900d2..5c55227a34c8 100644 --- a/drivers/firmware/efi/runtime-map.c +++ b/drivers/firmware/efi/runtime-map.c @@ -120,7 +120,8 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr) entry = kzalloc(sizeof(*entry), GFP_KERNEL); if (!entry) { kset_unregister(map_kset); - return entry; + map_kset = NULL; + return ERR_PTR(-ENOMEM); } memcpy(&entry->md, efi_runtime_map + nr * efi_memdesc_size, @@ -132,6 +133,7 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr) if (ret) { kobject_put(&entry->kobj); kset_unregister(map_kset); + map_kset = NULL; return ERR_PTR(ret); } @@ -195,8 +197,6 @@ out_add_entry: entry = *(map_entries + j); kobject_put(&entry->kobj); } - if (map_kset) - kset_unregister(map_kset); out: return ret; } From e59d29e88f7b7e3d1231202b0203d0af6f15a440 Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Tue, 28 Apr 2015 08:46:09 +0000 Subject: [PATCH 257/652] perf probe: Fix segfault if passed with ''. Since parse_perf_probe_point() deals with a user passed argument, we should not assume it to be a valid string. Without this patch, if pass '' to perf probe, a segfault raises: $ perf probe -a '' Segmentation fault This patch checks argument of parse_perf_probe_point() before string processing. After this patch: $ perf probe -a '' usage: perf probe [] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [] --add 'PROBEDEF' [--add 'PROBEDEF' ...] ... Signed-off-by: Wang Nan Acked-by: Masami Hiramatsu Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Zefan Li Link: http://lkml.kernel.org/r/1430210769-94177-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-event.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index d8bb616ff57c..d05b77cf35f7 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -1084,6 +1084,8 @@ static int parse_perf_probe_point(char *arg, struct perf_probe_event *pev) * * TODO:Group name support */ + if (!arg) + return -EINVAL; ptr = strpbrk(arg, ";=@+%"); if (ptr && *ptr == '=') { /* Event name */ From c0403ec0bb5a8c5b267fb7e16021bec0b17e4964 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 5 May 2015 15:15:56 +0200 Subject: [PATCH 258/652] Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY" This reverts Linux 4.1-rc1 commit 0618764cb25f6fa9fb31152995de42a8a0496475. The problem which that commit attempts to fix actually lies in the Freescale CAAM crypto driver not dm-crypt. dm-crypt uses CRYPTO_TFM_REQ_MAY_BACKLOG. This means the the crypto driver should internally backlog requests which arrive when the queue is full and process them later. Until the crypto hw's queue becomes full, the driver returns -EINPROGRESS. When the crypto hw's queue if full, the driver returns -EBUSY, and if CRYPTO_TFM_REQ_MAY_BACKLOG is set, is expected to backlog the request and process it when the hardware has queue space. At the point when the driver takes the request from the backlog and starts processing it, it calls the completion function with a status of -EINPROGRESS. The completion function is called (for a second time, in the case of backlogged requests) with a status/err of 0 when a request is done. Crypto drivers for hardware without hardware queueing use the helpers, crypto_init_queue(), crypto_enqueue_request(), crypto_dequeue_request() and crypto_get_backlog() helpers to implement this behaviour correctly, while others implement this behaviour without these helpers (ccp, for example). dm-crypt (before the patch that needs reverting) uses this API correctly. It queues up as many requests as the hw queues will allow (i.e. as long as it gets back -EINPROGRESS from the request function). Then, when it sees at least one backlogged request (gets -EBUSY), it waits till that backlogged request is handled (completion gets called with -EINPROGRESS), and then continues. The references to af_alg_wait_for_completion() and af_alg_complete() in that commit's commit message are irrelevant because those functions only handle one request at a time, unlink dm-crypt. The problem is that the Freescale CAAM driver, which that commit describes as having being tested with, fails to implement the backlogging behaviour correctly. In cam_jr_enqueue(), if the hardware queue is full, it simply returns -EBUSY without backlogging the request. What the observed deadlock was is not described in the commit message but it is obviously the wait_for_completion() in crypto_convert() where dm-crypto would wait for the completion being called with -EINPROGRESS in the case of backlogged requests. This completion will never be completed due to the bug in the CAAM driver. Commit 0618764cb25 incorrectly made dm-crypt wait for every request, even when the driver/hardware queues are not full, which means that dm-crypt will never see -EBUSY. This means that that commit will cause a performance regression on all crypto drivers which implement the API correctly. Revert it. Correct backlog handling should be implemented in the CAAM driver instead. Cc'ing stable purely because commit 0618764cb25 did. If for some reason a stable@ kernel did pick up commit 0618764cb25 it should get reverted. Signed-off-by: Rabin Vincent Reviewed-by: Horia Geanta Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer --- drivers/md/dm-crypt.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 9eeea196328a..5503e43e5f28 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -925,10 +925,11 @@ static int crypt_convert(struct crypt_config *cc, switch (r) { /* async */ - case -EINPROGRESS: case -EBUSY: wait_for_completion(&ctx->restart); reinit_completion(&ctx->restart); + /* fall through*/ + case -EINPROGRESS: ctx->req = NULL; ctx->cc_sector++; continue; @@ -1345,8 +1346,10 @@ static void kcryptd_async_done(struct crypto_async_request *async_req, struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx); struct crypt_config *cc = io->cc; - if (error == -EINPROGRESS) + if (error == -EINPROGRESS) { + complete(&ctx->restart); return; + } if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post) error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq); @@ -1357,15 +1360,12 @@ static void kcryptd_async_done(struct crypto_async_request *async_req, crypt_free_req(cc, req_of_dmreq(cc, dmreq), io->base_bio); if (!atomic_dec_and_test(&ctx->cc_pending)) - goto done; + return; if (bio_data_dir(io->base_bio) == READ) kcryptd_crypt_read_done(io); else kcryptd_crypt_write_io_submit(io, 1); -done: - if (!completion_done(&ctx->restart)) - complete(&ctx->restart); } static void kcryptd_crypt(struct work_struct *work) From cb31ef485dd4c6a205d1064b42027f82076d00c8 Mon Sep 17 00:00:00 2001 From: Chen Yu Date: Sun, 3 May 2015 22:35:05 +0800 Subject: [PATCH 259/652] init: fix regression by supporting devices with major:minor:offset format Commit 283e7ad02 ("init: stricter checking of major:minor root= values") was so strict that it exposed the fact that a previously unknown device format was being used. Distributions like Ubuntu uses klibc (rather than uswsusp) to resume system from hibernation. klibc expressed the swap partition/file in the form of major:minor:offset. For example, 8:3:0 represents a swap partition in klibc, and klibc's resume process in initrd will finally echo 8:3:0 to /sys/power/resume for manually resuming. However, due to commit 283e7ad02's stricter checking, 8:3:0 will be treated as an invalid device format, and manual resuming from hibernation will fail. Fix this by adding support for devices with major:minor:offset format when resuming from hibernation. Reported-by: Prigent, Christophe Signed-off-by: Chen Yu Acked-by: Rafael J. Wysocki Signed-off-by: Mike Snitzer --- init/do_mounts.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index 8369ffa5f33d..a95bbdb2a502 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -225,10 +225,11 @@ dev_t name_to_dev_t(const char *name) #endif if (strncmp(name, "/dev/", 5) != 0) { - unsigned maj, min; + unsigned maj, min, offset; char dummy; - if (sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) { + if ((sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) || + (sscanf(name, "%u:%u:%u:%c", &maj, &min, &offset, &dummy) == 3)) { res = MKDEV(maj, min); if (maj != MAJOR(res) || min != MINOR(res)) goto fail; From 471e70583217728955436a3fa6e5201e5c8c296a Mon Sep 17 00:00:00 2001 From: Honggang LI Date: Wed, 29 Apr 2015 17:40:44 +0800 Subject: [PATCH 260/652] IB/core: change rdma_gid2ip into void function as it always return zero Signed-off-by: Honggang Li Acked-by: Sean Hefty Signed-off-by: Doug Ledford --- drivers/infiniband/core/addr.c | 13 +++---------- include/rdma/ib_addr.h | 3 +-- 2 files changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index f80da50d84a5..38339d220d7f 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -472,13 +472,8 @@ int rdma_addr_find_dmac_by_grh(union ib_gid *sgid, union ib_gid *dgid, u8 *dmac, } sgid_addr, dgid_addr; - ret = rdma_gid2ip(&sgid_addr._sockaddr, sgid); - if (ret) - return ret; - - ret = rdma_gid2ip(&dgid_addr._sockaddr, dgid); - if (ret) - return ret; + rdma_gid2ip(&sgid_addr._sockaddr, sgid); + rdma_gid2ip(&dgid_addr._sockaddr, dgid); memset(&dev_addr, 0, sizeof(dev_addr)); @@ -512,10 +507,8 @@ int rdma_addr_find_smac_by_sgid(union ib_gid *sgid, u8 *smac, u16 *vlan_id) struct sockaddr_in6 _sockaddr_in6; } gid_addr; - ret = rdma_gid2ip(&gid_addr._sockaddr, sgid); + rdma_gid2ip(&gid_addr._sockaddr, sgid); - if (ret) - return ret; memset(&dev_addr, 0, sizeof(dev_addr)); ret = rdma_translate_ip(&gid_addr._sockaddr, &dev_addr, vlan_id); if (ret) diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h index ce55906b54a0..ac54c27a2bfd 100644 --- a/include/rdma/ib_addr.h +++ b/include/rdma/ib_addr.h @@ -160,7 +160,7 @@ static inline int rdma_ip2gid(struct sockaddr *addr, union ib_gid *gid) } /* Important - sockaddr should be a union of sockaddr_in and sockaddr_in6 */ -static inline int rdma_gid2ip(struct sockaddr *out, union ib_gid *gid) +static inline void rdma_gid2ip(struct sockaddr *out, union ib_gid *gid) { if (ipv6_addr_v4mapped((struct in6_addr *)gid)) { struct sockaddr_in *out_in = (struct sockaddr_in *)out; @@ -173,7 +173,6 @@ static inline int rdma_gid2ip(struct sockaddr *out, union ib_gid *gid) out_in->sin6_family = AF_INET6; memcpy(&out_in->sin6_addr.s6_addr, gid->raw, 16); } - return 0; } static inline void iboe_addr_get_sgid(struct rdma_dev_addr *dev_addr, From 0d0f738f6a11856a704dcd8fd3a008b200f17625 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 3 May 2015 09:48:26 -0400 Subject: [PATCH 261/652] IB/core: Fix unaligned accesses Addresses the following kernel logs seen during boot of sparc systems: Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Signed-off-by: David Ahern Signed-off-by: Doug Ledford --- drivers/infiniband/core/cm.c | 23 +++++++++++------------ drivers/infiniband/core/cm_msgs.h | 4 ++-- include/rdma/ib_cm.h | 7 ++++--- 3 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index e28a494e2a3a..0c1419105ff0 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -437,39 +437,38 @@ static struct cm_id_private * cm_acquire_id(__be32 local_id, __be32 remote_id) return cm_id_priv; } -static void cm_mask_copy(u8 *dst, u8 *src, u8 *mask) +static void cm_mask_copy(u32 *dst, const u32 *src, const u32 *mask) { int i; - for (i = 0; i < IB_CM_COMPARE_SIZE / sizeof(unsigned long); i++) - ((unsigned long *) dst)[i] = ((unsigned long *) src)[i] & - ((unsigned long *) mask)[i]; + for (i = 0; i < IB_CM_COMPARE_SIZE; i++) + dst[i] = src[i] & mask[i]; } static int cm_compare_data(struct ib_cm_compare_data *src_data, struct ib_cm_compare_data *dst_data) { - u8 src[IB_CM_COMPARE_SIZE]; - u8 dst[IB_CM_COMPARE_SIZE]; + u32 src[IB_CM_COMPARE_SIZE]; + u32 dst[IB_CM_COMPARE_SIZE]; if (!src_data || !dst_data) return 0; cm_mask_copy(src, src_data->data, dst_data->mask); cm_mask_copy(dst, dst_data->data, src_data->mask); - return memcmp(src, dst, IB_CM_COMPARE_SIZE); + return memcmp(src, dst, sizeof(src)); } -static int cm_compare_private_data(u8 *private_data, +static int cm_compare_private_data(u32 *private_data, struct ib_cm_compare_data *dst_data) { - u8 src[IB_CM_COMPARE_SIZE]; + u32 src[IB_CM_COMPARE_SIZE]; if (!dst_data) return 0; cm_mask_copy(src, private_data, dst_data->mask); - return memcmp(src, dst_data->data, IB_CM_COMPARE_SIZE); + return memcmp(src, dst_data->data, sizeof(src)); } /* @@ -538,7 +537,7 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) static struct cm_id_private * cm_find_listen(struct ib_device *device, __be64 service_id, - u8 *private_data) + u32 *private_data) { struct rb_node *node = cm.listen_service_table.rb_node; struct cm_id_private *cm_id_priv; @@ -953,7 +952,7 @@ int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id, __be64 service_mask, cm_mask_copy(cm_id_priv->compare_data->data, compare_data->data, compare_data->mask); memcpy(cm_id_priv->compare_data->mask, compare_data->mask, - IB_CM_COMPARE_SIZE); + sizeof(compare_data->mask)); } cm_id->state = IB_CM_LISTEN; diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h index be068f47e47e..8b76f0ef965e 100644 --- a/drivers/infiniband/core/cm_msgs.h +++ b/drivers/infiniband/core/cm_msgs.h @@ -103,7 +103,7 @@ struct cm_req_msg { /* local ACK timeout:5, rsvd:3 */ u8 alt_offset139; - u8 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE]; + u32 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE / sizeof(u32)]; } __attribute__ ((packed)); @@ -801,7 +801,7 @@ struct cm_sidr_req_msg { __be16 rsvd; __be64 service_id; - u8 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE]; + u32 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE / sizeof(u32)]; } __attribute__ ((packed)); struct cm_sidr_rep_msg { diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h index 0e3ff30647d5..39ed2d2fbd51 100644 --- a/include/rdma/ib_cm.h +++ b/include/rdma/ib_cm.h @@ -105,7 +105,8 @@ enum ib_cm_data_size { IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216, IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136, IB_CM_SIDR_REP_INFO_LENGTH = 72, - IB_CM_COMPARE_SIZE = 64 + /* compare done u32 at a time */ + IB_CM_COMPARE_SIZE = (64 / sizeof(u32)) }; struct ib_cm_id; @@ -337,8 +338,8 @@ void ib_destroy_cm_id(struct ib_cm_id *cm_id); #define IB_SDP_SERVICE_ID_MASK cpu_to_be64(0xFFFFFFFFFFFF0000ULL) struct ib_cm_compare_data { - u8 data[IB_CM_COMPARE_SIZE]; - u8 mask[IB_CM_COMPARE_SIZE]; + u32 data[IB_CM_COMPARE_SIZE]; + u32 mask[IB_CM_COMPARE_SIZE]; }; /** From 179d03bbfd2ebc63934753a696467d28bf9f5b64 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Tue, 5 May 2015 03:55:24 +0530 Subject: [PATCH 262/652] iw_cxgb4: Remove negative advice dmesg warnings Remove these log messages in favor of per-endpoint counters as well as device-global counters that can be inspected via debugfs. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 27 +++++++++++++++++--------- drivers/infiniband/hw/cxgb4/device.c | 7 +++++++ drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 7 +++++++ 3 files changed, 32 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 3c3b00e4e7af..bb95a6c0477b 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -2058,9 +2058,12 @@ static int act_open_rpl(struct c4iw_dev *dev, struct sk_buff *skb) status, status2errno(status)); if (is_neg_adv(status)) { - dev_warn(&dev->rdev.lldi.pdev->dev, - "Connection problems for atid %u status %u (%s)\n", - atid, status, neg_adv_str(status)); + PDBG("%s Connection problems for atid %u status %u (%s)\n", + __func__, atid, status, neg_adv_str(status)); + ep->stats.connect_neg_adv++; + mutex_lock(&dev->rdev.stats.lock); + dev->rdev.stats.neg_adv++; + mutex_unlock(&dev->rdev.stats.lock); return 0; } @@ -2566,9 +2569,13 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb) ep = lookup_tid(t, tid); if (is_neg_adv(req->status)) { - dev_warn(&dev->rdev.lldi.pdev->dev, - "Negative advice on abort - tid %u status %d (%s)\n", - ep->hwtid, req->status, neg_adv_str(req->status)); + PDBG("%s Negative advice on abort- tid %u status %d (%s)\n", + __func__, ep->hwtid, req->status, + neg_adv_str(req->status)); + ep->stats.abort_neg_adv++; + mutex_lock(&dev->rdev.stats.lock); + dev->rdev.stats.neg_adv++; + mutex_unlock(&dev->rdev.stats.lock); return 0; } PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid, @@ -3977,9 +3984,11 @@ static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb) return 0; } if (is_neg_adv(req->status)) { - dev_warn(&dev->rdev.lldi.pdev->dev, - "Negative advice on abort - tid %u status %d (%s)\n", - ep->hwtid, req->status, neg_adv_str(req->status)); + PDBG("%s Negative advice on abort- tid %u status %d (%s)\n", + __func__, ep->hwtid, req->status, + neg_adv_str(req->status)); + ep->stats.abort_neg_adv++; + dev->rdev.stats.neg_adv++; kfree_skb(skb); return 0; } diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 1ffbd038c0ae..cf54d6922dc4 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -490,6 +490,7 @@ static int stats_show(struct seq_file *seq, void *v) dev->rdev.stats.act_ofld_conn_fails); seq_printf(seq, "PAS_OFLD_CONN_FAILS: %10llu\n", dev->rdev.stats.pas_ofld_conn_fails); + seq_printf(seq, "NEG_ADV_RCVD: %10llu\n", dev->rdev.stats.neg_adv); seq_printf(seq, "AVAILABLE IRD: %10u\n", dev->avail_ird); return 0; } @@ -561,10 +562,13 @@ static int dump_ep(int id, void *p, void *data) cc = snprintf(epd->buf + epd->pos, space, "ep %p cm_id %p qp %p state %d flags 0x%lx " "history 0x%lx hwtid %d atid %d " + "conn_na %u abort_na %u " "%pI4:%d/%d <-> %pI4:%d/%d\n", ep, ep->com.cm_id, ep->com.qp, (int)ep->com.state, ep->com.flags, ep->com.history, ep->hwtid, ep->atid, + ep->stats.connect_neg_adv, + ep->stats.abort_neg_adv, &lsin->sin_addr, ntohs(lsin->sin_port), ntohs(mapped_lsin->sin_port), &rsin->sin_addr, ntohs(rsin->sin_port), @@ -582,10 +586,13 @@ static int dump_ep(int id, void *p, void *data) cc = snprintf(epd->buf + epd->pos, space, "ep %p cm_id %p qp %p state %d flags 0x%lx " "history 0x%lx hwtid %d atid %d " + "conn_na %u abort_na %u " "%pI6:%d/%d <-> %pI6:%d/%d\n", ep, ep->com.cm_id, ep->com.qp, (int)ep->com.state, ep->com.flags, ep->com.history, ep->hwtid, ep->atid, + ep->stats.connect_neg_adv, + ep->stats.abort_neg_adv, &lsin6->sin6_addr, ntohs(lsin6->sin6_port), ntohs(mapped_lsin6->sin6_port), &rsin6->sin6_addr, ntohs(rsin6->sin6_port), diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h index d87e1650f643..97bb5550a6cf 100644 --- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -137,6 +137,7 @@ struct c4iw_stats { u64 tcam_full; u64 act_ofld_conn_fails; u64 pas_ofld_conn_fails; + u64 neg_adv; }; struct c4iw_hw_queue { @@ -814,6 +815,11 @@ struct c4iw_listen_ep { int backlog; }; +struct c4iw_ep_stats { + unsigned connect_neg_adv; + unsigned abort_neg_adv; +}; + struct c4iw_ep { struct c4iw_ep_common com; struct c4iw_ep *parent_ep; @@ -846,6 +852,7 @@ struct c4iw_ep { unsigned int retry_count; int snd_win; int rcv_win; + struct c4iw_ep_stats stats; }; static inline void print_addr(struct c4iw_ep_common *epc, const char *func, From 8f71c1a27b84948720be17fffba71a67a1f0942d Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 5 May 2015 13:01:39 +0200 Subject: [PATCH 263/652] IPoIB/CM: Fix indentation level See also patch "IPoIB/cm: Add connected mode support for devices without SRQs" (commit ID 68e995a29572). Detected by smatch. Signed-off-by: Bart Van Assche Cc: Pradeep Satyanarayana Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 56959adb6c7d..cf32a778e7d0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -386,8 +386,8 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i rx->rx_ring[i].mapping, GFP_KERNEL)) { ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); - ret = -ENOMEM; - goto err_count; + ret = -ENOMEM; + goto err_count; } ret = ipoib_cm_post_receive_nonsrq(dev, rx, &t->wr, t->sge, i); if (ret) { From 954138dc25dca0263f315c5a3450059df05a4ea1 Mon Sep 17 00:00:00 2001 From: Yann Droneaud Date: Mon, 4 May 2015 14:31:03 +0200 Subject: [PATCH 264/652] MAINTAINERS: add include/rdma/ to InfiniBand subsystem Most headers for InfiniBand/RDMA are located under include/rdma/ and include/uapi/rdma. Signed-off-by: Yann Droneaud Reviewed-by: Ira Weiny Signed-off-by: Doug Ledford --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 781e099495d3..c80714ad3114 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5053,6 +5053,8 @@ S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ F: include/uapi/linux/if_infiniband.h +F: include/uapi/rdma/ +F: include/rdma/ INOTIFY M: John McCutchan From b6b2bbe65b2117afd9766faa7cffea4d8f681455 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Tue, 5 May 2015 12:57:09 -0400 Subject: [PATCH 265/652] MAINTAINERS: Update InfiniBand subsystem maintainer Since Roland stepped down, the community asked me to take his place, and the nomination was followed by sufficient votes and no dissensions that we can move forward with the change. Signed-off-by: Doug Ledford --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c80714ad3114..40c14f14204d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5042,13 +5042,13 @@ S: Orphan F: drivers/video/fbdev/imsttfb.c INFINIBAND SUBSYSTEM -M: Roland Dreier +M: Doug Ledford M: Sean Hefty M: Hal Rosenstock L: linux-rdma@vger.kernel.org W: http://www.openfabrics.org/ Q: http://patchwork.kernel.org/project/linux-rdma/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git +T: git git://github.com/dledford/linux.git S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ From 5cec98834989a014a9560b1841649eaca95cf00e Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:12 -0400 Subject: [PATCH 266/652] xen/events: Clear cpu_evtchn_mask before resuming When a guest is resumed, the hypervisor may change event channel assignments. If this happens and the guest uses 2-level events it is possible for the interrupt to be claimed by wrong VCPU since cpu_evtchn_mask bits may be stale. This can happen even though evtchn_2l_bind_to_cpu() attempts to clear old bits: irq_info that is passed in is not necessarily the original one (from pre-migration times) but instead is freshly allocated during resume and so any information about which CPU the channel was bound to is lost. Thus we should clear the mask during resume. We also need to make sure that bits for xenstore and console channels are set when these two subsystems are resumed. While rebind_evtchn_irq() (which is invoked for both of them on a resume) calls irq_set_affinity(), the latter will in fact postpone setting affinity until handling the interrupt. But because cpu_evtchn_mask will have bits for these two cleared we won't be able to take the interrupt. With that in mind, we need to bind those two channels explicitly in rebind_evtchn_irq(). We will keep irq_set_affinity() so that we have a pass through generic irq affinity code later, in case something needs to be updated there as well. (Also replace cpumask_of(0) with cpumask_of(info->cpu) in rebind_evtchn_irq(): it should be set to zero in preceding xen_irq_info_evtchn_setup().) Signed-off-by: Boris Ostrovsky Reported-by: Annie Li Cc: # 3.14+ Signed-off-by: David Vrabel --- drivers/xen/events/events_2l.c | 10 ++++++++++ drivers/xen/events/events_base.c | 5 +++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/xen/events/events_2l.c b/drivers/xen/events/events_2l.c index 5db43fc100a4..7dd46312c180 100644 --- a/drivers/xen/events/events_2l.c +++ b/drivers/xen/events/events_2l.c @@ -345,6 +345,15 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static void evtchn_2l_resume(void) +{ + int i; + + for_each_online_cpu(i) + memset(per_cpu(cpu_evtchn_mask, i), 0, sizeof(xen_ulong_t) * + EVTCHN_2L_NR_CHANNELS/BITS_PER_EVTCHN_WORD); +} + static const struct evtchn_ops evtchn_ops_2l = { .max_channels = evtchn_2l_max_channels, .nr_channels = evtchn_2l_max_channels, @@ -356,6 +365,7 @@ static const struct evtchn_ops evtchn_ops_2l = { .mask = evtchn_2l_mask, .unmask = evtchn_2l_unmask, .handle_events = evtchn_2l_handle_events, + .resume = evtchn_2l_resume, }; void __init xen_evtchn_2l_init(void) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 70fba973a107..a1ec564d791c 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -1279,8 +1279,9 @@ void rebind_evtchn_irq(int evtchn, int irq) mutex_unlock(&irq_mapping_update_lock); - /* new event channels are always bound to cpu 0 */ - irq_set_affinity(irq, cpumask_of(0)); + bind_evtchn_to_cpu(evtchn, info->cpu); + /* This will be deferred until interrupt is processed */ + irq_set_affinity(irq, cpumask_of(info->cpu)); /* Unmask the event channel. */ enable_irq(irq); From 16f1cf3ba7303228372d3756677bf7d10e79cf9f Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:13 -0400 Subject: [PATCH 267/652] xen/xenbus: Update xenbus event channel on resume After a resume the hypervisor/tools may change xenbus event channel number. We should re-query it. Signed-off-by: Boris Ostrovsky Cc: Signed-off-by: David Vrabel --- drivers/xen/xenbus/xenbus_probe.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 564b31584860..5390a674b5e3 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -57,6 +57,7 @@ #include #include #include +#include #include #include @@ -735,6 +736,30 @@ static int __init xenstored_local_init(void) return err; } +static int xenbus_resume_cb(struct notifier_block *nb, + unsigned long action, void *data) +{ + int err = 0; + + if (xen_hvm_domain()) { + uint64_t v; + + err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v); + if (!err && v) + xen_store_evtchn = v; + else + pr_warn("Cannot update xenstore event channel: %d\n", + err); + } else + xen_store_evtchn = xen_start_info->store_evtchn; + + return err; +} + +static struct notifier_block xenbus_resume_nb = { + .notifier_call = xenbus_resume_cb, +}; + static int __init xenbus_init(void) { int err = 0; @@ -793,6 +818,10 @@ static int __init xenbus_init(void) goto out_error; } + if ((xen_store_domain_type != XS_LOCAL) && + (xen_store_domain_type != XS_UNKNOWN)) + xen_resume_notifier_register(&xenbus_resume_nb); + #ifdef CONFIG_XEN_COMPAT_XENFS /* * Create xenfs mountpoint in /proc for compatibility with From b9d934f27c91b878c4b2e64299d6e419a4022f8d Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:14 -0400 Subject: [PATCH 268/652] xen/console: Update console event channel on resume After a resume the hypervisor/tools may change console event channel number. We should re-query it. Signed-off-by: Boris Ostrovsky Cc: Signed-off-by: David Vrabel --- drivers/tty/hvc/hvc_xen.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index f1e57425e39f..5bab1c684bb1 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -299,11 +299,27 @@ static int xen_initial_domain_console_init(void) return 0; } +static void xen_console_update_evtchn(struct xencons_info *info) +{ + if (xen_hvm_domain()) { + uint64_t v; + int err; + + err = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); + if (!err && v) + info->evtchn = v; + } else + info->evtchn = xen_start_info->console.domU.evtchn; +} + void xen_console_resume(void) { struct xencons_info *info = vtermno_to_xencons(HVC_COOKIE); - if (info != NULL && info->irq) + if (info != NULL && info->irq) { + if (!xen_initial_domain()) + xen_console_update_evtchn(info); rebind_evtchn_irq(info->evtchn, info->irq); + } } static void xencons_disconnect_backend(struct xencons_info *info) From 16e6bd5970c88a2ac018b84a5f1dd5c2ff1fdf2c Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:15 -0400 Subject: [PATCH 269/652] xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq() .. because bind_evtchn_to_cpu(evtchn, cpu) will map evtchn to 'info' and pass 'info' down to xen_evtchn_port_bind_to_cpu(). Signed-off-by: Boris Ostrovsky Tested-by: Annie Li Cc: Signed-off-by: David Vrabel --- drivers/xen/events/events_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index a1ec564d791c..2b8553bd8715 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -529,8 +529,8 @@ static unsigned int __startup_pirq(unsigned int irq) if (rc) goto err; - bind_evtchn_to_cpu(evtchn, 0); info->evtchn = evtchn; + bind_evtchn_to_cpu(evtchn, 0); rc = xen_evtchn_port_setup(info); if (rc) From a71dbdaa8ca2933391b08e0ae5567083e3af0892 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Mon, 4 May 2015 11:02:15 -0400 Subject: [PATCH 270/652] hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests Commit 61f01dd941ba ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue") makes AMD processors set SS to __KERNEL_DS in __switch_to() to deal with cases when SS is NULL. This breaks Xen PV guests who do not want to load SS with__KERNEL_DS. Since the problem that the commit is trying to address would have to be fixed in the hypervisor (if it in fact exists under Xen) there is no reason to set X86_BUG_SYSRET_SS_ATTRS flag for PV VPCUs here. This can be easily achieved by adding x86_hyper_xen_hvm.set_cpu_features op which will clear this flag. (And since this structure is no longer HVM-specific we should do some renaming). Signed-off-by: Boris Ostrovsky Reported-by: Sander Eikelenboom Signed-off-by: David Vrabel --- arch/x86/include/asm/hypervisor.h | 2 +- arch/x86/kernel/cpu/hypervisor.c | 4 ++-- arch/x86/xen/enlighten.c | 29 +++++++++++++++++++---------- 3 files changed, 22 insertions(+), 13 deletions(-) diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h index e42f758a0fbd..055ea9941dd5 100644 --- a/arch/x86/include/asm/hypervisor.h +++ b/arch/x86/include/asm/hypervisor.h @@ -50,7 +50,7 @@ extern const struct hypervisor_x86 *x86_hyper; /* Recognized hypervisors */ extern const struct hypervisor_x86 x86_hyper_vmware; extern const struct hypervisor_x86 x86_hyper_ms_hyperv; -extern const struct hypervisor_x86 x86_hyper_xen_hvm; +extern const struct hypervisor_x86 x86_hyper_xen; extern const struct hypervisor_x86 x86_hyper_kvm; extern void init_hypervisor(struct cpuinfo_x86 *c); diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c index 36ce402a3fa5..d820d8eae96b 100644 --- a/arch/x86/kernel/cpu/hypervisor.c +++ b/arch/x86/kernel/cpu/hypervisor.c @@ -27,8 +27,8 @@ static const __initconst struct hypervisor_x86 * const hypervisors[] = { -#ifdef CONFIG_XEN_PVHVM - &x86_hyper_xen_hvm, +#ifdef CONFIG_XEN + &x86_hyper_xen, #endif &x86_hyper_vmware, &x86_hyper_ms_hyperv, diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 94578efd3067..46957ead3060 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1760,6 +1760,9 @@ static struct notifier_block xen_hvm_cpu_notifier = { static void __init xen_hvm_guest_init(void) { + if (xen_pv_domain()) + return; + init_hvm_pv_info(); xen_hvm_init_shared_info(); @@ -1775,6 +1778,7 @@ static void __init xen_hvm_guest_init(void) xen_hvm_init_time_ops(); xen_hvm_init_mmu_ops(); } +#endif static bool xen_nopv = false; static __init int xen_parse_nopv(char *arg) @@ -1784,14 +1788,11 @@ static __init int xen_parse_nopv(char *arg) } early_param("xen_nopv", xen_parse_nopv); -static uint32_t __init xen_hvm_platform(void) +static uint32_t __init xen_platform(void) { if (xen_nopv) return 0; - if (xen_pv_domain()) - return 0; - return xen_cpuid_base(); } @@ -1809,11 +1810,19 @@ bool xen_hvm_need_lapic(void) } EXPORT_SYMBOL_GPL(xen_hvm_need_lapic); -const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = { - .name = "Xen HVM", - .detect = xen_hvm_platform, +static void xen_set_cpu_features(struct cpuinfo_x86 *c) +{ + if (xen_pv_domain()) + clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS); +} + +const struct hypervisor_x86 x86_hyper_xen = { + .name = "Xen", + .detect = xen_platform, +#ifdef CONFIG_XEN_PVHVM .init_platform = xen_hvm_guest_init, - .x2apic_available = xen_x2apic_para_available, -}; -EXPORT_SYMBOL(x86_hyper_xen_hvm); #endif + .x2apic_available = xen_x2apic_para_available, + .set_cpu_features = xen_set_cpu_features, +}; +EXPORT_SYMBOL(x86_hyper_xen); From de71ad2c97862eae1516aa36528cc3b317c17b2f Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Mon, 4 May 2015 15:16:44 -0300 Subject: [PATCH 271/652] x86: Make cpu_tss available to external modules Commit 75182b1632 ("x86/asm/entry: Switch all C consumers of kernel_stack to this_cpu_sp0()") changed current_thread_info to use this_cpu_sp0, and indirectly made it rely on init_tss which was exported with EXPORT_PER_CPU_SYMBOL_GPL. As a result some macros and inline functions such as set/get_fs, test_thread_flag and variants have been made unusable for external modules. Make cpu_tss exported with EXPORT_PER_CPU_SYMBOL so that these functions are accessible again, as they were previously. Signed-off-by: Marc Dionne Acked-by: Andy Lutomirski Link: http://lkml.kernel.org/r/1430763404-21221-1-git-send-email-marc.dionne@your-file-system.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 8213da62b1b7..bfc99b3b6522 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -57,7 +57,7 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = { .io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 }, #endif }; -EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss); +EXPORT_PER_CPU_SYMBOL(cpu_tss); #ifdef CONFIG_X86_64 static DEFINE_PER_CPU(unsigned char, is_idle); From d467f7a405cf0e7f06ed8d3175607ebb4ed06671 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Thu, 26 Mar 2015 13:35:18 -0500 Subject: [PATCH 272/652] ipmi_ssif: Fix the logic on user-supplied addresses Returning zero is success. Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_ssif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index f40e3bd2c69c..1de1914f5f89 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -1832,7 +1832,7 @@ static int init_ipmi_ssif(void) rv = new_ssif_client(addr[i], adapter_name[i], dbg[i], slave_addrs[i], SI_HARDCODED); - if (!rv) + if (rv) pr_err(PFX "Couldn't add hardcoded device at addr 0x%x\n", addr[i]); From b0e9aaa99dfb3036829e91d4f0aae449639e221a Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 31 Mar 2015 12:48:53 -0500 Subject: [PATCH 273/652] ipmi:ssif: Ignore spaces when comparing I2C adapter names Some of the adapters have spaces in their names, but that's really hard to pass in as a module or kernel parameters. So ignore the spaces. Signed-off-by: Corey Minyard --- Documentation/IPMI.txt | 5 ++++- drivers/char/ipmi/ipmi_ssif.c | 25 ++++++++++++++++++++++--- 2 files changed, 26 insertions(+), 4 deletions(-) diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index 653d5d739d7f..31d1d658827f 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -505,7 +505,10 @@ at module load time (for a module) with: The addresses are normal I2C addresses. The adapter is the string name of the adapter, as shown in /sys/class/i2c-adapter/i2c-/name. -It is *NOT* i2c- itself. +It is *NOT* i2c- itself. Also, the comparison is done ignoring +spaces, so if the name is "This is an I2C chip" you can say +adapter_name=ThisisanI2cchip. This is because it's hard to pass in +spaces in kernel parameters. The debug flags are bit flags for each BMC found, they are: IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8 diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 1de1914f5f89..3c3b7257867b 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -1258,6 +1258,23 @@ static const struct file_operations smi_stats_proc_ops = { .release = single_release, }; +static int strcmp_nospace(char *s1, char *s2) +{ + while (*s1 && *s2) { + while (isspace(*s1)) + s1++; + while (isspace(*s2)) + s2++; + if (*s1 > *s2) + return 1; + if (*s1 < *s2) + return -1; + s1++; + s2++; + } + return 0; +} + static struct ssif_addr_info *ssif_info_find(unsigned short addr, char *adapter_name, bool match_null_name) @@ -1272,8 +1289,10 @@ restart: /* One is NULL and one is not */ continue; } - if (strcmp(info->adapter_name, adapter_name)) - /* Names to not match */ + if (adapter_name && + strcmp_nospace(info->adapter_name, + adapter_name)) + /* Names do not match */ continue; } found = info; @@ -1407,7 +1426,7 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) } else { no_support: /* Assume no multi-part or PEC support */ - pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", + pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", rv, len, resp[2]); ssif_info->max_xmit_msg_size = 32; From 5e33cd0c5a299772b5ec1a493f0a77548664ae06 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 22 Feb 2015 10:21:07 -0800 Subject: [PATCH 274/652] ipmi: Remove incorrect use of seq_has_overflowed commit d6c5dc18d863 ("ipmi: Remove uses of return value of seq_printf") incorrectly changed the return value of various proc_show functions to use seq_has_overflowed(). These functions should return 0 on completion rather than 1/true on overflow. 1 is the same as #define SEQ_SKIP which would cause the output to not be emitted (skipped) instead. This is a logical defect only as the length of these outputs are all smaller than the initial allocation done by the seq filesystem. Signed-off-by: Joe Perches Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_msghandler.c | 4 ++-- drivers/char/ipmi/ipmi_si_intf.c | 4 ++-- drivers/char/ipmi/ipmi_ssif.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 9bb592872532..bf75f6361773 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2000,7 +2000,7 @@ static int smi_ipmb_proc_show(struct seq_file *m, void *v) seq_printf(m, " %x", intf->channels[i].address); seq_putc(m, '\n'); - return seq_has_overflowed(m); + return 0; } static int smi_ipmb_proc_open(struct inode *inode, struct file *file) @@ -2023,7 +2023,7 @@ static int smi_version_proc_show(struct seq_file *m, void *v) ipmi_version_major(&intf->bmc->id), ipmi_version_minor(&intf->bmc->id)); - return seq_has_overflowed(m); + return 0; } static int smi_version_proc_open(struct inode *inode, struct file *file) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 5e90a18afbaf..468c75e10330 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -3080,7 +3080,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v) seq_printf(m, "%s\n", si_to_str[smi->si_type]); - return seq_has_overflowed(m); + return 0; } static int smi_type_proc_open(struct inode *inode, struct file *file) @@ -3153,7 +3153,7 @@ static int smi_params_proc_show(struct seq_file *m, void *v) smi->irq, smi->slave_addr); - return seq_has_overflowed(m); + return 0; } static int smi_params_proc_open(struct inode *inode, struct file *file) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 3c3b7257867b..ee3b8c5e7e21 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -1200,7 +1200,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v) { seq_puts(m, "ssif\n"); - return seq_has_overflowed(m); + return 0; } static int smi_type_proc_open(struct inode *inode, struct file *file) From b1e65e71535aa128089d4cb1b6d90db7551fcb05 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Fri, 10 Apr 2015 20:19:18 -0500 Subject: [PATCH 275/652] ipmi: Don't report err in the SI driver for SSIF devices Really ignore them by returning -ENODEV from the probe, but not doing anything. Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_si_intf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 468c75e10330..461274168d0f 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2244,7 +2244,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, acpi_handle handle; acpi_status status; unsigned long long tmp; - int rv; + int rv = -EINVAL; acpi_dev = pnp_acpi_device(dev); if (!acpi_dev) @@ -2276,6 +2276,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, info->si_type = SI_BT; break; case 4: /* SSIF, just ignore */ + rv = -ENODEV; goto err_free; default: dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp); @@ -2336,7 +2337,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, err_free: kfree(info); - return -EINVAL; + return rv; } static void ipmi_pnp_remove(struct pnp_dev *dev) From df6dd1b35b0ec0ac6a5298378ceaf487091f448c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 27 Apr 2015 09:45:06 +0200 Subject: [PATCH 276/652] thinkpad_acpi: Fix warning for static not at beginning Fix the following warning: warning: "static" is not at beginning of declaration void static hotkey_mask_warn_incomplete_mask(void) ^ Signed-off-by: Jean Delvare Cc: Henrique de Moraes Holschuh Cc: Darren Hart Signed-off-by: Darren Hart --- drivers/platform/x86/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 7769575345d8..9bb9ad6d4a1b 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2115,7 +2115,7 @@ static int hotkey_mask_get(void) return 0; } -void static hotkey_mask_warn_incomplete_mask(void) +static void hotkey_mask_warn_incomplete_mask(void) { /* log only what the user can fix... */ const u32 wantedmask = hotkey_driver_mask & From 7aab5159fa0100ee3f80d1b0f55cd7e9b5823270 Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Mon, 4 May 2015 10:57:16 -0700 Subject: [PATCH 277/652] hv_netvsc: remove unused variable in netvsc_send() With commit b56fc3c53654 ("hv_netvsc: Fix a bug in netvsc_start_xmit()"), skb variable is no longer used in netvsc_send. Remove variable and dead code that depended on it. Cc: Haiyang Zhang Cc: K. Y. Srinivasan Signed-off-by: Jerry Snitselaar Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 2d9ef533cc48..ea091bc5ff09 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -826,7 +826,6 @@ int netvsc_send(struct hv_device *device, u16 q_idx = packet->q_idx; u32 pktlen = packet->total_data_buflen, msd_len = 0; unsigned int section_index = NETVSC_INVALID_INDEX; - struct sk_buff *skb = NULL; unsigned long flag; struct multi_send_data *msdp; struct hv_netvsc_packet *msd_send = NULL, *cur_send = NULL; @@ -924,12 +923,8 @@ int netvsc_send(struct hv_device *device, if (cur_send) ret = netvsc_send_pkt(cur_send, net_device); - if (ret != 0) { - if (section_index != NETVSC_INVALID_INDEX) - netvsc_free_send_slot(net_device, section_index); - } else if (skb) { - dev_kfree_skb_any(skb); - } + if (ret != 0 && section_index != NETVSC_INVALID_INDEX) + netvsc_free_send_slot(net_device, section_index); return ret; } From cae0633872fc8b0c34930dd2862856563bce58ec Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 5 May 2015 17:07:11 +0300 Subject: [PATCH 278/652] net/mlx4_en: Fix off-by-one in counters manipulation This caused the en_stats_adder helper to accumulate a field which is not related to the counter, fix that. Fixes: a3333b35da16 ('net/mlx4_en: Moderate ethtool callback to show [..]') Signed-off-by: Eran Ben Elisha Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 54f0e5ab2e55..0a56f010c846 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -139,7 +139,7 @@ static unsigned long en_stats_adder(__be64 *start, __be64 *next, int num) int i; int offset = next - start; - for (i = 0; i <= num; i++) { + for (i = 0; i < num; i++) { ret += be64_to_cpu(*curr); curr += offset; } From 2d3c739739e64619f4846746a06ff0a6adf8a155 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 5 May 2015 17:07:12 +0300 Subject: [PATCH 279/652] net/mlx4_core: Work properly with EQ numbers > 256 in SRIOV The Firmware uses dynamic EQs allocation based on number of VFs and max EQs that can be allocated. As a result, VF can have EQ numbers that are larger than 256. According to the firmware spec, the max value is limited to be 1024 (10 bits), adapt the relevant code accordingly. This bug was impossible to hit prior to commit 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") which actually enables large number of EQs for VFs. Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx4/resource_tracker.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index c7f28bf4b8e2..92fce1b98558 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2845,7 +2845,7 @@ int mlx4_SW2HW_EQ_wrapper(struct mlx4_dev *dev, int slave, { int err; int eqn = vhcr->in_modifier; - int res_id = (slave << 8) | eqn; + int res_id = (slave << 10) | eqn; struct mlx4_eq_context *eqc = inbox->buf; int mtt_base = eq_get_mtt_addr(eqc) / dev->caps.mtt_entry_sz; int mtt_size = eq_get_mtt_size(eqc); @@ -3051,7 +3051,7 @@ int mlx4_HW2SW_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int eqn = vhcr->in_modifier; - int res_id = eqn | (slave << 8); + int res_id = eqn | (slave << 10); struct res_eq *eq; int err; @@ -3108,7 +3108,7 @@ int mlx4_GEN_EQE(struct mlx4_dev *dev, int slave, struct mlx4_eqe *eqe) return 0; mutex_lock(&priv->mfunc.master.gen_eqe_mutex[slave]); - res_id = (slave << 8) | event_eq->eqn; + res_id = (slave << 10) | event_eq->eqn; err = get_res(dev, slave, res_id, RES_EQ, &req); if (err) goto unlock; @@ -3131,7 +3131,7 @@ int mlx4_GEN_EQE(struct mlx4_dev *dev, int slave, struct mlx4_eqe *eqe) memcpy(mailbox->buf, (u8 *) eqe, 28); - in_modifier = (slave & 0xff) | ((event_eq->eqn & 0xff) << 16); + in_modifier = (slave & 0xff) | ((event_eq->eqn & 0x3ff) << 16); err = mlx4_cmd(dev, mailbox->dma, in_modifier, 0, MLX4_CMD_GEN_EQE, MLX4_CMD_TIME_CLASS_B, @@ -3157,7 +3157,7 @@ int mlx4_QUERY_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int eqn = vhcr->in_modifier; - int res_id = eqn | (slave << 8); + int res_id = eqn | (slave << 10); struct res_eq *eq; int err; @@ -4714,13 +4714,13 @@ static void rem_slave_eqs(struct mlx4_dev *dev, int slave) break; case RES_EQ_HW: - err = mlx4_cmd(dev, slave, eqn & 0xff, + err = mlx4_cmd(dev, slave, eqn & 0x3ff, 1, MLX4_CMD_HW2SW_EQ, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); if (err) mlx4_dbg(dev, "rem_slave_eqs: failed to move slave %d eqs %d to SW ownership\n", - slave, eqn); + slave, eqn & 0x3ff); atomic_dec(&eq->mtt->ref_count); state = RES_EQ_RESERVED; break; From c967a0873a7836c7a77bf611f1c7d3f47c554c45 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 5 May 2015 09:06:30 -0700 Subject: [PATCH 280/652] mpls: Move reserved label definitions Move to include/uapi/linux/mpls.h to be externally visibile. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/uapi/linux/mpls.h | 10 ++++++++++ net/mpls/af_mpls.c | 18 +++++++++--------- net/mpls/internal.h | 10 ---------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h index bc9abfe88c9a..0fe6ea5a41d5 100644 --- a/include/uapi/linux/mpls.h +++ b/include/uapi/linux/mpls.h @@ -31,4 +31,14 @@ struct mpls_label { #define MPLS_LS_TTL_MASK 0x000000FF #define MPLS_LS_TTL_SHIFT 0 +/* Reserved labels */ +#define MPLS_LABEL_IPV4_EXPLICIT_NULL 0 /* RFC3032 */ +#define MPLS_LABEL_ROUTER_ALERT 1 /* RFC3032 */ +#define MPLS_LABEL_IPV6_EXPLICIT_NULL 2 /* RFC3032 */ +#define MPLS_LABEL_IMPLICIT_NULL 3 /* RFC3032 */ +#define MPLS_LABEL_ENTROPY_INDICATOR 7 /* RFC6790 */ +#define MPLS_LABEL_GAL 13 /* RFC5586 */ +#define MPLS_LABEL_OAM_ALERT 14 /* RFC3429 */ +#define MPLS_LABEL_EXTENSION 15 /* RFC7274 */ + #endif /* _UAPI_MPLS_H */ diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c index 954810c76a86..b6eb7615960a 100644 --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -647,7 +647,7 @@ int nla_get_labels(const struct nlattr *nla, return -EINVAL; switch (dec.label) { - case LABEL_IMPLICIT_NULL: + case MPLS_LABEL_IMPLICIT_NULL: /* RFC3032: This is a label that an LSR may * assign and distribute, but which never * actually appears in the encapsulation. @@ -935,7 +935,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) } /* In case the predefined labels need to be populated */ - if (limit > LABEL_IPV4_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL) { struct net_device *lo = net->loopback_dev; rt0 = mpls_rt_alloc(lo->addr_len); if (!rt0) @@ -945,7 +945,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) rt0->rt_via_table = NEIGH_LINK_TABLE; memcpy(rt0->rt_via, lo->dev_addr, lo->addr_len); } - if (limit > LABEL_IPV6_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL) { struct net_device *lo = net->loopback_dev; rt2 = mpls_rt_alloc(lo->addr_len); if (!rt2) @@ -973,15 +973,15 @@ static int resize_platform_label_table(struct net *net, size_t limit) memcpy(labels, old, cp_size); /* If needed set the predefined labels */ - if ((old_limit <= LABEL_IPV6_EXPLICIT_NULL) && - (limit > LABEL_IPV6_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[LABEL_IPV6_EXPLICIT_NULL], rt2); + if ((old_limit <= MPLS_LABEL_IPV6_EXPLICIT_NULL) && + (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV6_EXPLICIT_NULL], rt2); rt2 = NULL; } - if ((old_limit <= LABEL_IPV4_EXPLICIT_NULL) && - (limit > LABEL_IPV4_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[LABEL_IPV4_EXPLICIT_NULL], rt0); + if ((old_limit <= MPLS_LABEL_IPV4_EXPLICIT_NULL) && + (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV4_EXPLICIT_NULL], rt0); rt0 = NULL; } diff --git a/net/mpls/internal.h b/net/mpls/internal.h index 693877d69606..b064c345042c 100644 --- a/net/mpls/internal.h +++ b/net/mpls/internal.h @@ -1,16 +1,6 @@ #ifndef MPLS_INTERNAL_H #define MPLS_INTERNAL_H -#define LABEL_IPV4_EXPLICIT_NULL 0 /* RFC3032 */ -#define LABEL_ROUTER_ALERT_LABEL 1 /* RFC3032 */ -#define LABEL_IPV6_EXPLICIT_NULL 2 /* RFC3032 */ -#define LABEL_IMPLICIT_NULL 3 /* RFC3032 */ -#define LABEL_ENTROPY_INDICATOR 7 /* RFC6790 */ -#define LABEL_GAL 13 /* RFC5586 */ -#define LABEL_OAM_ALERT 14 /* RFC3429 */ -#define LABEL_EXTENSION 15 /* RFC7274 */ - - struct mpls_shim_hdr { __be32 label_stack_entry; }; From 31ccd0e66d41f73cfc21a8de976e713455205228 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 Apr 2015 16:20:58 -0700 Subject: [PATCH 281/652] tcp_westwood: fix tcp_westwood_info() I forgot to update tcp_westwood when changing get_info() behavior, this patch should fix this. Fixes: 64f40ff5bbdb ("tcp: prepare CC get_info() access from getsockopt()") Reported-by: kbuild test robot Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_westwood.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c index b3c57cceb990..c10732e39837 100644 --- a/net/ipv4/tcp_westwood.c +++ b/net/ipv4/tcp_westwood.c @@ -256,18 +256,19 @@ static void tcp_westwood_event(struct sock *sk, enum tcp_ca_event event) } /* Extract info for Tcp socket info provided via netlink. */ -static int tcp_westwood_info(struct sock *sk, u32 ext, struct sk_buff *skb) +static size_t tcp_westwood_info(struct sock *sk, u32 ext, int *attr, + union tcp_cc_info *info) { const struct westwood *ca = inet_csk_ca(sk); if (ext & (1 << (INET_DIAG_VEGASINFO - 1))) { - struct tcpvegas_info info = { - .tcpv_enabled = 1, - .tcpv_rtt = jiffies_to_usecs(ca->rtt), - .tcpv_minrtt = jiffies_to_usecs(ca->rtt_min), - }; + info->vegas.tcpv_enabled = 1; + info->vegas.tcpv_rttcnt = 0; + info->vegas.tcpv_rtt = jiffies_to_usecs(ca->rtt), + info->vegas.tcpv_minrtt = jiffies_to_usecs(ca->rtt_min), - return nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info); + *attr = INET_DIAG_VEGASINFO; + return sizeof(struct tcpvegas_info); } return 0; } From 99ebbd30e3640f6addb37f222b4d6ad4b807d9ea Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 5 May 2015 16:23:25 -0700 Subject: [PATCH 282/652] revert "zram: move compact_store() to sysfs functions area" Revert commit c72c6160d967ed26a0b136dbab337f821d233509 It was intended to be a cosmetic change that w/o any functional change and was part of a bigger change: http://lkml.iu.edu/hypermail/linux/kernel/1503.1/01818.html Sergey Senozhatsky Cc: Linus Torvalds Cc: Minchan Kim Cc: Nitin Gupta Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/zram/zram_drv.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index c94386aa563d..8dcbced0eafd 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -74,6 +74,27 @@ static inline struct zram *dev_to_zram(struct device *dev) return (struct zram *)dev_to_disk(dev)->private_data; } +static ssize_t compact_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + unsigned long nr_migrated; + struct zram *zram = dev_to_zram(dev); + struct zram_meta *meta; + + down_read(&zram->init_lock); + if (!init_done(zram)) { + up_read(&zram->init_lock); + return -EINVAL; + } + + meta = zram->meta; + nr_migrated = zs_compact(meta->mem_pool); + atomic64_add(nr_migrated, &zram->stats.num_migrated); + up_read(&zram->init_lock); + + return len; +} + static ssize_t disksize_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1038,6 +1059,7 @@ static const struct block_device_operations zram_devops = { .owner = THIS_MODULE }; +static DEVICE_ATTR_WO(compact); static DEVICE_ATTR_RW(disksize); static DEVICE_ATTR_RO(initstate); static DEVICE_ATTR_WO(reset); @@ -1114,6 +1136,7 @@ static struct attribute *zram_disk_attrs[] = { &dev_attr_num_writes.attr, &dev_attr_failed_reads.attr, &dev_attr_failed_writes.attr, + &dev_attr_compact.attr, &dev_attr_invalid_io.attr, &dev_attr_notify_free.attr, &dev_attr_zero_pages.attr, From 74f3037c4015f3a440dc4cb4e31477875fa9791c Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 5 May 2015 16:23:28 -0700 Subject: [PATCH 283/652] zram: add Designated Reviewer for zram in MAINTAINERS Sergey Senozhatsky has contributed/reviewed to zram for a long time. He is really helpful for maintaining zram so I want for him to continue helping me as Designated Reviewer unless he hates it. Signed-off-by: Minchan Kim Cc: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 781e099495d3..1c7fd3c85ba7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11037,6 +11037,7 @@ F: drivers/media/pci/zoran/ ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER M: Minchan Kim M: Nitin Gupta +R: Sergey Senozhatsky L: linux-kernel@vger.kernel.org S: Maintained F: drivers/block/zram/ From 48b945a19cf6e7e548b2ce545ec88f93284ab276 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 5 May 2015 16:23:30 -0700 Subject: [PATCH 284/652] MAINTAINERS: add co-maintainer for LED subsystem Add myself (Jacek Anaszewski) as a co-maintainer for the LED subsystem. Signed-off-by: Jacek Anaszewski Acked-by: Bryan Wu Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1c7fd3c85ba7..b399b34a2496 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5805,6 +5805,7 @@ F: drivers/scsi/53c700* LED SUBSYSTEM M: Bryan Wu M: Richard Purdie +M: Jacek Anaszewski L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git S: Maintained From 7d616e4ddb9c0754ed6245a43332d5b867e4db11 Mon Sep 17 00:00:00 2001 From: Yury Norov Date: Tue, 5 May 2015 16:23:33 -0700 Subject: [PATCH 285/652] lib: delete lib/find_last_bit.c The file lib/find_last_bit.c was no longer used and supposed to be deleted by commit 8f6f19dd51 ("lib: move find_last_bit to lib/find_next_bit.c") but that delete didn't happen. This gets rid of it. Signed-off-by: Yury Norov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/find_last_bit.c | 41 ----------------------------------------- 1 file changed, 41 deletions(-) delete mode 100644 lib/find_last_bit.c diff --git a/lib/find_last_bit.c b/lib/find_last_bit.c deleted file mode 100644 index 3e3be40c6a6e..000000000000 --- a/lib/find_last_bit.c +++ /dev/null @@ -1,41 +0,0 @@ -/* find_last_bit.c: fallback find next bit implementation - * - * Copyright (C) 2008 IBM Corporation - * Written by Rusty Russell - * (Inspired by David Howell's find_next_bit implementation) - * - * Rewritten by Yury Norov to decrease - * size and improve performance, 2015. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#ifndef find_last_bit - -unsigned long find_last_bit(const unsigned long *addr, unsigned long size) -{ - if (size) { - unsigned long val = BITMAP_LAST_WORD_MASK(size); - unsigned long idx = (size-1) / BITS_PER_LONG; - - do { - val &= addr[idx]; - if (val) - return idx * BITS_PER_LONG + __fls(val); - - val = ~0ul; - } while (idx--); - } - return size; -} -EXPORT_SYMBOL(find_last_bit); - -#endif From 09789e5de18e4e442870b2d700831f5cb802eb05 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:35 -0700 Subject: [PATCH 286/652] mm/memory-failure: call shake_page() when error hits thp tail page Currently memory_failure() calls shake_page() to sweep pages out from pcplists only when the victim page is 4kB LRU page or thp head page. But we should do this for a thp tail page too. Consider that a memory error hits a thp tail page whose head page is on a pcplist when memory_failure() runs. Then, the current kernel skips shake_pages() part, so hwpoison_user_mappings() returns without calling split_huge_page() nor try_to_unmap() because PageLRU of the thp head is still cleared due to the skip of shake_page(). As a result, me_huge_page() runs for the thp, which is broken behavior. One effect is a leak of the thp. And another is to fail to isolate the memory error, so later access to the error address causes another MCE, which kills the processes which used the thp. This patch fixes this problem by calling shake_page() for thp tail case. Fixes: 385de35722c9 ("thp: allow a hwpoisoned head page to be put back to LRU") Signed-off-by: Naoya Horiguchi Reviewed-by: Andi Kleen Acked-by: Dean Nelson Cc: Andrea Arcangeli Cc: Hidetoshi Seto Cc: Jin Dongming Cc: [3.4+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index d9359b770cd9..22e0f270e4f7 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1187,10 +1187,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) * The check (unnecessarily) ignores LRU pages being isolated and * walked by the page reclaim code, however that's not a big loss. */ - if (!PageHuge(p) && !PageTransTail(p)) { - if (!PageLRU(p)) - shake_page(p, 0); - if (!PageLRU(p)) { + if (!PageHuge(p)) { + if (!PageLRU(hpage)) + shake_page(hpage, 0); + if (!PageLRU(hpage)) { /* * shake_page could have turned it free. */ From 01e76903f655a4d88c2e09d3182436c65f6e1213 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 5 May 2015 16:23:38 -0700 Subject: [PATCH 287/652] kasan: show gcc version requirements in Kconfig and Documentation The documentation shows a need for gcc > 4.9.2, but it's really >=. The Kconfig entries don't show require versions so add them. Correct a latter/later typo too. Also mention that gcc 5 required to catch out of bounds accesses to global and stack variables. Signed-off-by: Joe Perches Signed-off-by: Andrey Ryabinin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kasan.txt | 8 +++++--- lib/Kconfig.kasan | 8 ++++++-- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt index 092fc10961fe..4692241789b1 100644 --- a/Documentation/kasan.txt +++ b/Documentation/kasan.txt @@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds bugs. KASan uses compile-time instrumentation for checking every memory access, -therefore you will need a certain version of GCC > 4.9.2 +therefore you will need a gcc version of 4.9.2 or later. KASan could detect out +of bounds accesses to stack or global variables, but only if gcc 5.0 or later was +used to built the kernel. Currently KASan is supported only for x86_64 architecture and requires that the kernel be built with the SLUB allocator. @@ -23,8 +25,8 @@ To enable KASAN configure kernel with: and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline is compiler instrumentation types. The former produces smaller binary the -latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or -latter. +latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version +of 5.0 or later. Currently KASAN works only with the SLUB memory allocator. For better bug detection and nicer report, enable CONFIG_STACKTRACE and put diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 4fecaedc80a2..777eda7d1ab4 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -10,8 +10,11 @@ config KASAN help Enables kernel address sanitizer - runtime memory debugger, designed to find out-of-bounds accesses and use-after-free bugs. - This is strictly debugging feature. It consumes about 1/8 - of available memory and brings about ~x3 performance slowdown. + This is strictly a debugging feature and it requires a gcc version + of 4.9.2 or later. Detection of out of bounds accesses to stack or + global variables requires gcc 5.0 or later. + This feature consumes about 1/8 of available memory and brings about + ~x3 performance slowdown. For better error detection enable CONFIG_STACKTRACE, and add slub_debug=U to boot cmdline. @@ -40,6 +43,7 @@ config KASAN_INLINE memory accesses. This is faster than outline (in some workloads it gives about x2 boost over outline instrumentation), but make kernel's .text size much bigger. + This requires a gcc version of 5.0 or later. endchoice From c71f1e05e62f3eb843b6458eeb7298f269b34b1e Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 5 May 2015 16:23:41 -0700 Subject: [PATCH 288/652] Documentation: bindings: add abracon,abx80x Document the bindings for abracon,abx80x and related compatibles. Signed-off-by: Alexandre Belloni Cc: Philippe De Muyter Cc: Alessandro Zummo Cc: Arnd Bergmann Cc: Paul Bolle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .../bindings/rtc/abracon,abx80x.txt | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/abracon,abx80x.txt diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt new file mode 100644 index 000000000000..be789685a1c2 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt @@ -0,0 +1,30 @@ +Abracon ABX80X I2C ultra low power RTC/Alarm chip + +The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, +ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 +is the superset of ab180x. + +Required properties: + + - "compatible": should one of: + "abracon,abx80x" + "abracon,ab0801" + "abracon,ab0803" + "abracon,ab0804" + "abracon,ab0805" + "abracon,ab1801" + "abracon,ab1803" + "abracon,ab1804" + "abracon,ab1805" + Using "abracon,abx80x" will enable chip autodetection. + - "reg": I2C bus address of the device + +Optional properties: + +The abx804 and abx805 have a trickle charger that is able to charge the +connected battery or supercap. Both the following properties have to be defined +and valid to enable charging: + + - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) + - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output + resistor, the other values are in ohm. From 4d61ff6b9960cb00cf2c12abd5769aa2dd475415 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Tue, 5 May 2015 16:23:44 -0700 Subject: [PATCH 289/652] rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC chips. It supports in particular, the supersets AB0805 and AB1805. It allows reading and writing the time, and enables the supercapacitor/ battery charger. [arnd@arndb.de: abx805 depends on i2c] [alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()] Signed-off-by: Philippe De Muyter Cc: Alessandro Zummo Signed-off-by: Alexandre Belloni Signed-off-by: Arnd Bergmann Cc: Paul Bolle Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 10 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-abx80x.c | 307 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 318 insertions(+) create mode 100644 drivers/rtc/rtc-abx80x.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6149ae01e11f..0fe4ad8826b2 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -164,6 +164,16 @@ config RTC_DRV_ABB5ZES3 This driver can also be built as a module. If so, the module will be called rtc-ab-b5ze-s3. +config RTC_DRV_ABX80X + tristate "Abracon ABx80x" + help + If you say yes here you get support for Abracon AB080X and AB180X + families of ultra-low-power battery- and capacitor-backed real-time + clock chips. + + This driver can also be built as a module. If so, the module + will be called rtc-abx80x. + config RTC_DRV_AS3722 tristate "ams AS3722 RTC driver" depends on MFD_AS3722 diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index c31731c29762..2b82e2b0311b 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o +obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c new file mode 100644 index 000000000000..4337c3bc6ace --- /dev/null +++ b/drivers/rtc/rtc-abx80x.c @@ -0,0 +1,307 @@ +/* + * A driver for the I2C members of the Abracon AB x8xx RTC family, + * and compatible: AB 1805 and AB 0805 + * + * Copyright 2014-2015 Macq S.A. + * + * Author: Philippe De Muyter + * Author: Alexandre Belloni + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#define ABX8XX_REG_HTH 0x00 +#define ABX8XX_REG_SC 0x01 +#define ABX8XX_REG_MN 0x02 +#define ABX8XX_REG_HR 0x03 +#define ABX8XX_REG_DA 0x04 +#define ABX8XX_REG_MO 0x05 +#define ABX8XX_REG_YR 0x06 +#define ABX8XX_REG_WD 0x07 + +#define ABX8XX_REG_CTRL1 0x10 +#define ABX8XX_CTRL_WRITE BIT(1) +#define ABX8XX_CTRL_12_24 BIT(6) + +#define ABX8XX_REG_CFG_KEY 0x1f +#define ABX8XX_CFG_KEY_MISC 0x9d + +#define ABX8XX_REG_ID0 0x28 + +#define ABX8XX_REG_TRICKLE 0x20 +#define ABX8XX_TRICKLE_CHARGE_ENABLE 0xa0 +#define ABX8XX_TRICKLE_STANDARD_DIODE 0x8 +#define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4 + +static u8 trickle_resistors[] = {0, 3, 6, 11}; + +enum abx80x_chip {AB0801, AB0803, AB0804, AB0805, + AB1801, AB1803, AB1804, AB1805, ABX80X}; + +struct abx80x_cap { + u16 pn; + bool has_tc; +}; + +static struct abx80x_cap abx80x_caps[] = { + [AB0801] = {.pn = 0x0801}, + [AB0803] = {.pn = 0x0803}, + [AB0804] = {.pn = 0x0804, .has_tc = true}, + [AB0805] = {.pn = 0x0805, .has_tc = true}, + [AB1801] = {.pn = 0x1801}, + [AB1803] = {.pn = 0x1803}, + [AB1804] = {.pn = 0x1804, .has_tc = true}, + [AB1805] = {.pn = 0x1805, .has_tc = true}, + [ABX80X] = {.pn = 0} +}; + +static struct i2c_driver abx80x_driver; + +static int abx80x_enable_trickle_charger(struct i2c_client *client, + u8 trickle_cfg) +{ + int err; + + /* + * Write the configuration key register to enable access to the Trickle + * register + */ + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, + ABX8XX_CFG_KEY_MISC); + if (err < 0) { + dev_err(&client->dev, "Unable to write configuration key\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE, + ABX8XX_TRICKLE_CHARGE_ENABLE | + trickle_cfg); + if (err < 0) { + dev_err(&client->dev, "Unable to write trickle register\n"); + return -EIO; + } + + return 0; +} + +static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[8]; + int err; + + err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F); + tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7; + tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F); + tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F) - 1; + tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 100; + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[8]; + int err; + + if (tm->tm_year < 100) + return -EINVAL; + + buf[ABX8XX_REG_HTH] = 0; + buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec); + buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min); + buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour); + buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday); + buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon + 1); + buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100); + buf[ABX8XX_REG_WD] = tm->tm_wday; + + err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + return 0; +} + +static const struct rtc_class_ops abx80x_rtc_ops = { + .read_time = abx80x_rtc_read_time, + .set_time = abx80x_rtc_set_time, +}; + +static int abx80x_dt_trickle_cfg(struct device_node *np) +{ + const char *diode; + int trickle_cfg = 0; + int i, ret; + u32 tmp; + + ret = of_property_read_string(np, "abracon,tc-diode", &diode); + if (ret) + return ret; + + if (!strcmp(diode, "standard")) + trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE; + else if (!strcmp(diode, "schottky")) + trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE; + else + return -EINVAL; + + ret = of_property_read_u32(np, "abracon,tc-resistor", &tmp); + if (ret) + return ret; + + for (i = 0; i < sizeof(trickle_resistors); i++) + if (trickle_resistors[i] == tmp) + break; + + if (i == sizeof(trickle_resistors)) + return -EINVAL; + + return (trickle_cfg | i); +} + +static int abx80x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *np = client->dev.of_node; + struct rtc_device *rtc; + int i, data, err, trickle_cfg = -EINVAL; + char buf[7]; + unsigned int part = id->driver_data; + unsigned int partnumber; + unsigned int majrev, minrev; + unsigned int lot; + unsigned int wafer; + unsigned int uid; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to read partnumber\n"); + return -EIO; + } + + partnumber = (buf[0] << 8) | buf[1]; + majrev = buf[2] >> 3; + minrev = buf[2] & 0x7; + lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3]; + uid = ((buf[4] & 0x7f) << 8) | buf[5]; + wafer = (buf[6] & 0x7c) >> 2; + dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n", + partnumber, majrev, minrev, lot, wafer, uid); + + data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1, + ((data & ~ABX8XX_CTRL_12_24) | + ABX8XX_CTRL_WRITE)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* part autodetection */ + if (part == ABX80X) { + for (i = 0; abx80x_caps[i].pn; i++) + if (partnumber == abx80x_caps[i].pn) + break; + if (abx80x_caps[i].pn == 0) { + dev_err(&client->dev, "Unknown part: %04x\n", + partnumber); + return -EINVAL; + } + part = i; + } + + if (partnumber != abx80x_caps[part].pn) { + dev_err(&client->dev, "partnumber mismatch %04x != %04x\n", + partnumber, abx80x_caps[part].pn); + return -EINVAL; + } + + if (np && abx80x_caps[part].has_tc) + trickle_cfg = abx80x_dt_trickle_cfg(np); + + if (trickle_cfg > 0) { + dev_info(&client->dev, "Enabling trickle charger: %02x\n", + trickle_cfg); + abx80x_enable_trickle_charger(client, trickle_cfg); + } + + rtc = devm_rtc_device_register(&client->dev, abx80x_driver.driver.name, + &abx80x_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int abx80x_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id abx80x_id[] = { + { "abx80x", ABX80X }, + { "ab0801", AB0801 }, + { "ab0803", AB0803 }, + { "ab0804", AB0804 }, + { "ab0805", AB0805 }, + { "ab1801", AB1801 }, + { "ab1803", AB1803 }, + { "ab1804", AB1804 }, + { "ab1805", AB1805 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, abx80x_id); + +static struct i2c_driver abx80x_driver = { + .driver = { + .name = "rtc-abx80x", + }, + .probe = abx80x_probe, + .remove = abx80x_remove, + .id_table = abx80x_id, +}; + +module_i2c_driver(abx80x_driver); + +MODULE_AUTHOR("Philippe De Muyter "); +MODULE_AUTHOR("Alexandre Belloni "); +MODULE_DESCRIPTION("Abracon ABX80X RTC driver"); +MODULE_LICENSE("GPL v2"); From 602498f9aa43d4951eece3fd6ad95a6d0a78d537 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:46 -0700 Subject: [PATCH 290/652] mm: soft-offline: fix num_poisoned_pages counting on concurrent events If multiple soft offline events hit one free page/hugepage concurrently, soft_offline_page() can handle the free page/hugepage multiple times, which makes num_poisoned_pages counter increased more than once. This patch fixes this wrong counting by checking TestSetPageHWPoison for normal papes and by checking the return value of dequeue_hwpoisoned_huge_page() for hugepages. Signed-off-by: Naoya Horiguchi Acked-by: Dean Nelson Cc: Andi Kleen Cc: [3.14+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 22e0f270e4f7..501820c815b3 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1777,12 +1777,12 @@ int soft_offline_page(struct page *page, int flags) } else if (ret == 0) { /* for free pages */ if (PageHuge(page)) { set_page_hwpoison_huge_page(hpage); - dequeue_hwpoisoned_huge_page(hpage); - atomic_long_add(1 << compound_order(hpage), + if (!dequeue_hwpoisoned_huge_page(hpage)) + atomic_long_add(1 << compound_order(hpage), &num_poisoned_pages); } else { - SetPageHWPoison(page); - atomic_long_inc(&num_poisoned_pages); + if (!TestSetPageHWPoison(page)) + atomic_long_inc(&num_poisoned_pages); } } unset_migratetype_isolate(page, MIGRATE_MOVABLE); From 7ea434a4eb49db83d17cc076f2267704c52938ae Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:49 -0700 Subject: [PATCH 291/652] mm/hwpoison-inject: fix refcounting in no-injection case Hwpoison injection via debugfs:hwpoison/corrupt-pfn takes a refcount of the target page. But current code doesn't release it if the target page is not supposed to be injected, which results in memory leak. This patch simply adds the refcount releasing code. Signed-off-by: Naoya Horiguchi Acked-by: Dean Nelson Cc: Andi Kleen Cc: Andrea Arcangeli Cc: Hidetoshi Seto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hwpoison-inject.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c index 329caf56df22..2b3f933e3282 100644 --- a/mm/hwpoison-inject.c +++ b/mm/hwpoison-inject.c @@ -40,7 +40,7 @@ static int hwpoison_inject(void *data, u64 val) * This implies unable to support non-LRU pages. */ if (!PageLRU(p) && !PageHuge(p)) - return 0; + goto put_out; /* * do a racy check with elevated page count, to make sure PG_hwpoison @@ -52,11 +52,14 @@ static int hwpoison_inject(void *data, u64 val) err = hwpoison_filter(hpage); unlock_page(hpage); if (err) - return 0; + goto put_out; inject: pr_info("Injecting memory failure at pfn %#lx\n", pfn); return memory_failure(pfn, 18, MF_COUNT_INCREASED); +put_out: + put_page(hpage); + return 0; } static int hwpoison_unpoison(void *data, u64 val) From e386eed89c764f102fcc3c0d4c78c65a357f7399 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:52 -0700 Subject: [PATCH 292/652] mm/hwpoison-inject: check PageLRU of hpage Hwpoison injector checks PageLRU of the raw target page to find out whether the page is an appropriate target, but current code now filters out thp tail pages, which prevents us from testing for such cases via this interface. So let's check hpage instead of p. Signed-off-by: Naoya Horiguchi Acked-by: Dean Nelson Cc: Andi Kleen Cc: Andrea Arcangeli Cc: Hidetoshi Seto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hwpoison-inject.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c index 2b3f933e3282..4ca5fe0042e1 100644 --- a/mm/hwpoison-inject.c +++ b/mm/hwpoison-inject.c @@ -34,12 +34,12 @@ static int hwpoison_inject(void *data, u64 val) if (!hwpoison_filter_enable) goto inject; - if (!PageLRU(p) && !PageHuge(p)) - shake_page(p, 0); + if (!PageLRU(hpage) && !PageHuge(p)) + shake_page(hpage, 0); /* * This implies unable to support non-LRU pages. */ - if (!PageLRU(p) && !PageHuge(p)) + if (!PageLRU(hpage) && !PageHuge(p)) goto put_out; /* From f5b697700c86d7d01489202bfd37d86665754afd Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Tue, 5 May 2015 16:23:54 -0700 Subject: [PATCH 293/652] configfs: init configfs module earlier at boot time We need this earlier in the boot process to allow various subsystems to use configfs (e.g Industrial IIO). Also, debugfs is at core_initcall level and configfs should be on the same level from infrastructure point of view. Signed-off-by: Daniel Baluta Suggested-by: Lars-Peter Clausen Reviewed-by: Christoph Hellwig Cc: Al Viro Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/configfs/mount.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index da94e41bdbf6..537356742091 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -173,5 +173,5 @@ MODULE_LICENSE("GPL"); MODULE_VERSION("0.0.2"); MODULE_DESCRIPTION("Simple RAM filesystem for user driven kernel subsystem configuration."); -module_init(configfs_init); +core_initcall(configfs_init); module_exit(configfs_exit); From 05836c378c7af9527b98a83746f32c7289a5f3c8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 5 May 2015 16:23:57 -0700 Subject: [PATCH 294/652] util_macros.h: have array pointer point to array of constants Using the new find_closest() macro can result in the following sparse warnings. drivers/hwmon/lm85.c:194:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:194:16: expected int *__fc_a drivers/hwmon/lm85.c:194:16: got int static const [toplevel] * drivers/hwmon/lm85.c:210:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:210:16: expected int *__fc_a drivers/hwmon/lm85.c:210:16: got int const *map This is because the array passed to find_closest() will typically be declared as array of constants, but the macro declares a non-constant pointer to it. Signed-off-by: Guenter Roeck Cc: Bartosz Golaszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/util_macros.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/util_macros.h b/include/linux/util_macros.h index d5f4fb69dba3..f9b2ce58039b 100644 --- a/include/linux/util_macros.h +++ b/include/linux/util_macros.h @@ -5,7 +5,7 @@ ({ \ typeof(as) __fc_i, __fc_as = (as) - 1; \ typeof(x) __fc_x = (x); \ - typeof(*a) *__fc_a = (a); \ + typeof(*a) const *__fc_a = (a); \ for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \ if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] + \ __fc_a[__fc_i + 1], 2)) \ From d8fd150fe3935e1692bf57c66691e17409ebb9c1 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 5 May 2015 16:24:00 -0700 Subject: [PATCH 295/652] nilfs2: fix sanity check of btree level in nilfs_btree_root_broken() The range check for b-tree level parameter in nilfs_btree_root_broken() is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even though the level is limited to values in the range of 0 to (NILFS_BTREE_LEVEL_MAX - 1). Since the level parameter is read from storage device and used to index nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it can cause memory overrun during btree operations if the boundary value is set to the level parameter on device. This fixes the broken sanity check and adds a comment to clarify that the upper bound NILFS_BTREE_LEVEL_MAX is exclusive. Signed-off-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nilfs2/btree.c | 2 +- include/linux/nilfs2_fs.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 059f37137f9a..919fd5bb14a8 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -388,7 +388,7 @@ static int nilfs_btree_root_broken(const struct nilfs_btree_node *node, nchildren = nilfs_btree_node_get_nchildren(node); if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN || - level > NILFS_BTREE_LEVEL_MAX || + level >= NILFS_BTREE_LEVEL_MAX || nchildren < 0 || nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) { pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n", diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index ff3fea3194c6..9abb763e4b86 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -460,7 +460,7 @@ struct nilfs_btree_node { /* level */ #define NILFS_BTREE_LEVEL_DATA 0 #define NILFS_BTREE_LEVEL_NODE_MIN (NILFS_BTREE_LEVEL_DATA + 1) -#define NILFS_BTREE_LEVEL_MAX 14 +#define NILFS_BTREE_LEVEL_MAX 14 /* Max level (exclusive) */ /** * struct nilfs_palloc_group_desc - block group descriptor From b1432a2a35565f538586774a03bf277c27fc267d Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Tue, 5 May 2015 16:24:02 -0700 Subject: [PATCH 296/652] ocfs2: dlm: fix race between purge and get lock resource There is a race window in dlm_get_lock_resource(), which may return a lock resource which has been purged. This will cause the process to hang forever in dlmlock() as the ast msg can't be handled due to its lock resource not existing. dlm_get_lock_resource { ... spin_lock(&dlm->spinlock); tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash); if (tmpres) { spin_unlock(&dlm->spinlock); >>>>>>>> race window, dlm_run_purge_list() may run and purge the lock resource spin_lock(&tmpres->spinlock); ... spin_unlock(&tmpres->spinlock); } } Signed-off-by: Junxiao Bi Cc: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dlm/dlmmaster.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index a6944b25fd5b..fdf4b41d0609 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -757,6 +757,19 @@ lookup: if (tmpres) { spin_unlock(&dlm->spinlock); spin_lock(&tmpres->spinlock); + + /* + * Right after dlm spinlock was released, dlm_thread could have + * purged the lockres. Check if lockres got unhashed. If so + * start over. + */ + if (hlist_unhashed(&tmpres->hash_node)) { + spin_unlock(&tmpres->spinlock); + dlm_lockres_put(tmpres); + tmpres = NULL; + goto lookup; + } + /* Wait on the thread that is mastering the resource */ if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) { __dlm_wait_on_lockres(tmpres); From 489405fe5ed38e65f6f82f131a39c67f3bae6045 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 5 May 2015 16:24:05 -0700 Subject: [PATCH 297/652] rtc: armada38x: fix concurrency access in armada38x_rtc_set_time While setting the time, the RTC TIME register should not be accessed. However due to hardware constraints, setting the RTC time involves sleeping during 100ms. This sleep was done outside the critical section protected by the spinlock, so it was possible to read the RTC TIME register and get an incorrect value. This patch introduces a mutex for protecting the RTC TIME access, unlike the spinlock it is allowed to sleep in a critical section protected by a mutex. The RTC STATUS register can still be used from the interrupt handler but it has no effect on setting the time. Signed-off-by: Gregory CLEMENT Acked-by: Alexandre Belloni Acked-by: Andrew Lunn Cc: Alessandro Zummo Cc: [4.0] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-armada38x.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c index 43e04af39e09..cb70ced7e0db 100644 --- a/drivers/rtc/rtc-armada38x.c +++ b/drivers/rtc/rtc-armada38x.c @@ -40,6 +40,13 @@ struct armada38x_rtc { void __iomem *regs; void __iomem *regs_soc; spinlock_t lock; + /* + * While setting the time, the RTC TIME register should not be + * accessed. Setting the RTC time involves sleeping during + * 100ms, so a mutex instead of a spinlock is used to protect + * it + */ + struct mutex mutex_time; int irq; }; @@ -59,8 +66,7 @@ static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) struct armada38x_rtc *rtc = dev_get_drvdata(dev); unsigned long time, time_check, flags; - spin_lock_irqsave(&rtc->lock, flags); - + mutex_lock(&rtc->mutex_time); time = readl(rtc->regs + RTC_TIME); /* * WA for failing time set attempts. As stated in HW ERRATA if @@ -71,7 +77,7 @@ static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) if ((time_check - time) > 1) time_check = readl(rtc->regs + RTC_TIME); - spin_unlock_irqrestore(&rtc->lock, flags); + mutex_unlock(&rtc->mutex_time); rtc_time_to_tm(time_check, tm); @@ -94,19 +100,12 @@ static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm) * then wait for 100ms before writing to the time register to be * sure that the data will be taken into account. */ - spin_lock_irqsave(&rtc->lock, flags); - + mutex_lock(&rtc->mutex_time); rtc_delayed_write(0, rtc, RTC_STATUS); - - spin_unlock_irqrestore(&rtc->lock, flags); - msleep(100); - - spin_lock_irqsave(&rtc->lock, flags); - rtc_delayed_write(time, rtc, RTC_TIME); + mutex_unlock(&rtc->mutex_time); - spin_unlock_irqrestore(&rtc->lock, flags); out: return ret; } @@ -230,6 +229,7 @@ static __init int armada38x_rtc_probe(struct platform_device *pdev) return -ENOMEM; spin_lock_init(&rtc->lock); + mutex_init(&rtc->mutex_time); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc"); rtc->regs = devm_ioremap_resource(&pdev->dev, res); From 15c5725e6b86cb8dfc4ca655a22005cc678a6f6f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 Apr 2015 21:09:53 +0800 Subject: [PATCH 298/652] ipmi: Remove unused including Remove including that don't need it. Signed-off-by: Wei Yongjun Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_ssif.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index ee3b8c5e7e21..f6ea4fa444b3 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -31,7 +31,6 @@ * interface into the I2C driver, I believe. */ -#include #if defined(MODVERSIONS) #include #endif From a182a4b2b3e85a559ea2cd3545f4311db41325f2 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 22 Apr 2015 13:25:40 -0500 Subject: [PATCH 299/652] ipmi: Report an error if ACPI _IFT doesn't exist When probing an ACPI table, report a specific error, instead of just returning an error, if _IFT doesn't exist. Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_si_intf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 461274168d0f..b5a1b450471f 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2262,8 +2262,10 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, /* _IFT tells us the interface type: KCS, BT, etc */ status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { + dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n"); goto err_free; + } switch (tmp) { case 1: From 9f8127048ab8b47b43f8aeaaec9fec2da44be9a1 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Thu, 23 Apr 2015 11:16:44 +0900 Subject: [PATCH 300/652] ipmi: Fix a problem that messages are not issued in run_to_completion mode start_next_msg() issues a message placed in smi_info->waiting_msg if it is non-NULL. However, sender() sets a message to smi_info->curr_msg and NULL to smi_info->waiting_msg in the context of run_to_completion mode. As the result, it leads an infinite loop by waiting the completion of unissued message when leaving dying message after kernel panic. sender() should set the message to smi_info->waiting_msg not curr_msg. Signed-off-by: Hidehiro Kawai Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_si_intf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index b5a1b450471f..8a45e92ff60c 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -942,8 +942,7 @@ static void sender(void *send_info, * If we are running to completion, start it and run * transactions until everything is clear. */ - smi_info->curr_msg = msg; - smi_info->waiting_msg = NULL; + smi_info->waiting_msg = msg; /* * Run to completion means we are single-threaded, no From 9162052173d2381e2bbabc224c3c1457acb4c54c Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Fri, 24 Apr 2015 07:46:06 -0500 Subject: [PATCH 301/652] ipmi: Add alert handling to SSIF The SSIF interface can optionally have an SMBus alert come in when data is ready. Unfortunately, the IPMI spec gives wiggle room to the implementer to allow them to always have the alert enabled, even if the driver doesn't enable it. So implement alerts. If you don't in this situation, the SMBus alert handling will constantly complain. Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_ssif.c | 132 +++++++++++++++++++++++++++++----- 1 file changed, 116 insertions(+), 16 deletions(-) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index f6ea4fa444b3..5b82d9947ec5 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -165,6 +165,9 @@ enum ssif_stat_indexes { /* Number of watchdog pretimeouts. */ SSIF_STAT_watchdog_pretimeouts, + /* Number of alers received. */ + SSIF_STAT_alerts, + /* Always add statistics before this value, it must be last. */ SSIF_NUM_STATS }; @@ -213,7 +216,16 @@ struct ssif_info { #define WDT_PRE_TIMEOUT_INT 0x08 unsigned char msg_flags; + u8 global_enables; bool has_event_buffer; + bool supports_alert; + + /* + * Used to tell what we should do with alerts. If we are + * waiting on a response, read the data immediately. + */ + bool got_alert; + bool waiting_alert; /* * If set to true, this will request events the next time the @@ -517,14 +529,10 @@ static int ssif_i2c_send(struct ssif_info *ssif_info, static void msg_done_handler(struct ssif_info *ssif_info, int result, unsigned char *data, unsigned int len); -static void retry_timeout(unsigned long data) +static void start_get(struct ssif_info *ssif_info) { - struct ssif_info *ssif_info = (void *) data; int rv; - if (ssif_info->stopping) - return; - ssif_info->rtc_us_timer = 0; rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, @@ -539,6 +547,46 @@ static void retry_timeout(unsigned long data) } } +static void retry_timeout(unsigned long data) +{ + struct ssif_info *ssif_info = (void *) data; + unsigned long oflags, *flags; + bool waiting; + + if (ssif_info->stopping) + return; + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + waiting = ssif_info->waiting_alert; + ssif_info->waiting_alert = false; + ipmi_ssif_unlock_cond(ssif_info, flags); + + if (waiting) + start_get(ssif_info); +} + + +static void ssif_alert(struct i2c_client *client, unsigned int data) +{ + struct ssif_info *ssif_info = i2c_get_clientdata(client); + unsigned long oflags, *flags; + bool do_get = false; + + ssif_inc_stat(ssif_info, alerts); + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + if (ssif_info->waiting_alert) { + ssif_info->waiting_alert = false; + del_timer(&ssif_info->retry_timer); + do_get = true; + } else if (ssif_info->curr_msg) { + ssif_info->got_alert = true; + } + ipmi_ssif_unlock_cond(ssif_info, flags); + if (do_get) + start_get(ssif_info); +} + static int start_resend(struct ssif_info *ssif_info); static void msg_done_handler(struct ssif_info *ssif_info, int result, @@ -558,9 +606,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, if (ssif_info->retries_left > 0) { ssif_inc_stat(ssif_info, receive_retries); + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + ssif_info->waiting_alert = true; + ssif_info->rtc_us_timer = SSIF_MSG_USEC; mod_timer(&ssif_info->retry_timer, jiffies + SSIF_MSG_JIFFIES); - ssif_info->rtc_us_timer = SSIF_MSG_USEC; + ipmi_ssif_unlock_cond(ssif_info, flags); return; } @@ -649,7 +700,7 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, if (rv < 0) { if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) pr_info(PFX - "Error from i2c_non_blocking_op(2)\n"); + "Error from ssif_i2c_send\n"); result = -EIO; } else @@ -863,15 +914,32 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result, msg_done_handler(ssif_info, -EIO, NULL, 0); } } else { + unsigned long oflags, *flags; + bool got_alert; + ssif_inc_stat(ssif_info, sent_messages); ssif_inc_stat(ssif_info, sent_messages_parts); - /* Wait a jiffie then request the next message */ - ssif_info->retries_left = SSIF_RECV_RETRIES; - ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; - mod_timer(&ssif_info->retry_timer, - jiffies + SSIF_MSG_PART_JIFFIES); - return; + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + got_alert = ssif_info->got_alert; + if (got_alert) { + ssif_info->got_alert = false; + ssif_info->waiting_alert = false; + } + + if (got_alert) { + ipmi_ssif_unlock_cond(ssif_info, flags); + /* The alert already happened, try now. */ + retry_timeout((unsigned long) ssif_info); + } else { + /* Wait a jiffie then request the next message */ + ssif_info->waiting_alert = true; + ssif_info->retries_left = SSIF_RECV_RETRIES; + ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; + mod_timer(&ssif_info->retry_timer, + jiffies + SSIF_MSG_PART_JIFFIES); + ipmi_ssif_unlock_cond(ssif_info, flags); + } } } @@ -880,6 +948,8 @@ static int start_resend(struct ssif_info *ssif_info) int rv; int command; + ssif_info->got_alert = false; + if (ssif_info->data_len > 32) { command = SSIF_IPMI_MULTI_PART_REQUEST_START; ssif_info->multi_data = ssif_info->data; @@ -1242,6 +1312,8 @@ static int smi_stats_proc_show(struct seq_file *m, void *v) ssif_get_stat(ssif_info, events)); seq_printf(m, "watchdog_pretimeouts: %u\n", ssif_get_stat(ssif_info, watchdog_pretimeouts)); + seq_printf(m, "alerts: %u\n", + ssif_get_stat(ssif_info, alerts)); return 0; } @@ -1324,6 +1396,12 @@ static bool check_acpi(struct ssif_info *ssif_info, struct device *dev) return false; } +/* + * Global enables we care about. + */ +#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \ + IPMI_BMC_EVT_MSG_INTR) + static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) { unsigned char msg[3]; @@ -1454,6 +1532,8 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) goto found; } + ssif_info->global_enables = resp[3]; + if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) { ssif_info->has_event_buffer = true; /* buffer is already enabled, nothing to do. */ @@ -1462,18 +1542,37 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) msg[0] = IPMI_NETFN_APP_REQUEST << 2; msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; - msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF; + msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF; rv = do_cmd(client, 3, msg, &len, resp); if (rv || (len < 2)) { - pr_warn(PFX "Error getting global enables: %d %d %2.2x\n", + pr_warn(PFX "Error setting global enables: %d %d %2.2x\n", rv, len, resp[2]); rv = 0; /* Not fatal */ goto found; } - if (resp[2] == 0) + if (resp[2] == 0) { /* A successful return means the event buffer is supported. */ ssif_info->has_event_buffer = true; + ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF; + } + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR; + rv = do_cmd(client, 3, msg, &len, resp); + if (rv || (len < 2)) { + pr_warn(PFX "Error setting global enables: %d %d %2.2x\n", + rv, len, resp[2]); + rv = 0; /* Not fatal */ + goto found; + } + + if (resp[2] == 0) { + /* A successful return means the alert is supported. */ + ssif_info->supports_alert = true; + ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR; + } found: ssif_info->intf_num = atomic_inc_return(&next_intf); @@ -1831,6 +1930,7 @@ static struct i2c_driver ssif_i2c_driver = { }, .probe = ssif_probe, .remove = ssif_remove, + .alert = ssif_alert, .id_table = ssif_id, .detect = ssif_detect }; From 3d69d43baa2749c3d187ce70940d7aebe609e149 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 29 Apr 2015 17:59:21 -0500 Subject: [PATCH 302/652] ipmi: Fix multi-part message handling Lots of little fixes for multi-part messages: The values was not being re-initialized, if something went wrong handling a multi-part message and it got left in a bad state, it might be an issue. The commands were not correct when issuing multi-part reads, the code was not passing in the proper value for commands. Also clean up some minor formatting issues. Get the block number from the right location, limit the maximum send message size to 63 bytes and explain why, and fix some minor sylistic issues. Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_ssif.c | 51 ++++++++++++++++++++++++++--------- 1 file changed, 38 insertions(+), 13 deletions(-) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 5b82d9947ec5..207689c444a8 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -489,13 +489,13 @@ static int ipmi_ssif_thread(void *data) if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) { result = i2c_smbus_write_block_data( - ssif_info->client, SSIF_IPMI_REQUEST, + ssif_info->client, ssif_info->i2c_command, ssif_info->i2c_data[0], ssif_info->i2c_data + 1); ssif_info->done_handler(ssif_info, result, NULL, 0); } else { result = i2c_smbus_read_block_data( - ssif_info->client, SSIF_IPMI_RESPONSE, + ssif_info->client, ssif_info->i2c_command, ssif_info->i2c_data); if (result < 0) ssif_info->done_handler(ssif_info, result, @@ -534,6 +534,7 @@ static void start_get(struct ssif_info *ssif_info) int rv; ssif_info->rtc_us_timer = 0; + ssif_info->multi_pos = 0; rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, SSIF_IPMI_RESPONSE, @@ -631,9 +632,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, ssif_inc_stat(ssif_info, received_message_parts); /* Remove the multi-part read marker. */ - for (i = 0; i < (len-2); i++) - ssif_info->data[i] = data[i+2]; len -= 2; + for (i = 0; i < len; i++) + ssif_info->data[i] = data[i+2]; ssif_info->multi_len = len; ssif_info->multi_pos = 1; @@ -660,9 +661,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, goto continue_op; } - blocknum = data[ssif_info->multi_len]; + blocknum = data[0]; - if (ssif_info->multi_len+len-1 > IPMI_MAX_MSG_LENGTH) { + if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) { /* Received message too big, abort the operation. */ result = -E2BIG; if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) @@ -672,15 +673,15 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, } /* Remove the blocknum from the data. */ - for (i = 0; i < (len-1); i++) - ssif_info->data[i+ssif_info->multi_len] = data[i+1]; len--; + for (i = 0; i < len; i++) + ssif_info->data[i + ssif_info->multi_len] = data[i + 1]; ssif_info->multi_len += len; if (blocknum == 0xff) { /* End of read */ len = ssif_info->multi_len; data = ssif_info->data; - } else if ((blocknum+1) != ssif_info->multi_pos) { + } else if (blocknum + 1 != ssif_info->multi_pos) { /* * Out of sequence block, just abort. Block * numbers start at zero for the second block, @@ -880,7 +881,11 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result, } if (ssif_info->multi_data) { - /* In the middle of a multi-data write. */ + /* + * In the middle of a multi-data write. See the comment + * in the SSIF_MULTI_n_PART case in the probe function + * for details on the intricacies of this. + */ int left; ssif_inc_stat(ssif_info, sent_messages_parts); @@ -984,7 +989,7 @@ static int start_send(struct ssif_info *ssif_info, return -E2BIG; ssif_info->retries_left = SSIF_SEND_RETRIES; - memcpy(ssif_info->data+1, data, len); + memcpy(ssif_info->data + 1, data, len); ssif_info->data_len = len; return start_resend(ssif_info); } @@ -1487,13 +1492,33 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) break; case SSIF_MULTI_2_PART: - if (ssif_info->max_xmit_msg_size > 64) - ssif_info->max_xmit_msg_size = 64; + if (ssif_info->max_xmit_msg_size > 63) + ssif_info->max_xmit_msg_size = 63; if (ssif_info->max_recv_msg_size > 62) ssif_info->max_recv_msg_size = 62; break; case SSIF_MULTI_n_PART: + /* + * The specification is rather confusing at + * this point, but I think I understand what + * is meant. At least I have a workable + * solution. With multi-part messages, you + * cannot send a message that is a multiple of + * 32-bytes in length, because the start and + * middle messages are 32-bytes and the end + * message must be at least one byte. You + * can't fudge on an extra byte, that would + * screw up things like fru data writes. So + * we limit the length to 63 bytes. That way + * a 32-byte message gets sent as a single + * part. A larger message will be a 32-byte + * start and the next message is always going + * to be 1-31 bytes in length. Not ideal, but + * it should work. + */ + if (ssif_info->max_xmit_msg_size > 63) + ssif_info->max_xmit_msg_size = 63; break; default: From bd5fb0aec3dd7cde7ec4c397b10e55d4c9626d8d Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Tue, 28 Apr 2015 19:30:47 +0200 Subject: [PATCH 303/652] usb: chipidea: debug: avoid out of bound read A string written by the user may not be zero terminated. sscanf may read memory beyond the buffer if no zero byte is found. For testing build with CONFIG_USB_CHIPIDEA=y, CONFIG_USB_CHIPIDEA_DEBUG=y. Signed-off-by: Heinrich Schuchardt Signed-off-by: Peter Chen --- drivers/usb/chipidea/debug.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index dfb05edcdb96..5b7061a33103 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -88,9 +88,13 @@ static ssize_t ci_port_test_write(struct file *file, const char __user *ubuf, char buf[32]; int ret; - if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + count = min_t(size_t, sizeof(buf) - 1, count); + if (copy_from_user(buf, ubuf, count)) return -EFAULT; + /* sscanf requires a zero terminated string */ + buf[count] = '\0'; + if (sscanf(buf, "%u", &mode) != 1) return -EINVAL; From 9fcb1704d1d51b12e2f03c78bca013d0cbbb7c98 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 5 May 2015 16:32:12 +0300 Subject: [PATCH 304/652] drm/i915/dp: there is no audio on port A The eDP port A register on PCH split platforms has a slightly different register layout from the other ports, with bit 6 being either alternate scrambler reset or reserved, depending on the generation. Our misinterpretation of the bit as audio has lead to warning. Fix this by not enabling audio on port A, since none of our platforms support audio on port A anyway. v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958 Reported-and-tested-by: Chris Bainbridge Cc: stable@vger.kernel.org Reviewed-by: Sivakumar Thulasimani Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d0237102c27e..8d534f409b23 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1348,7 +1348,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, pipe_config->has_dp_encoder = true; pipe_config->has_drrs = false; - pipe_config->has_audio = intel_dp->has_audio; + pipe_config->has_audio = intel_dp->has_audio && port != PORT_A; if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { intel_fixed_panel_mode(intel_connector->panel.fixed_mode, @@ -2211,8 +2211,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder, int dotclock; tmp = I915_READ(intel_dp->output_reg); - if (tmp & DP_AUDIO_OUTPUT_ENABLE) - pipe_config->has_audio = true; + + pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A; if ((port == PORT_A) || !HAS_PCH_CPT(dev)) { if (tmp & DP_SYNC_HS_HIGH) From c88d47480d300eaad80c213d50c9bf6077fc49bc Mon Sep 17 00:00:00 2001 From: Bobby Powers Date: Mon, 27 Apr 2015 08:10:41 -0700 Subject: [PATCH 305/652] x86/fpu: Always restore_xinit_state() when use_eager_cpu() The following commit: f893959b0898 ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()") removed drop_init_fpu() usage from flush_thread(). This seems to break things for me - the Go 1.4 test suite fails all over the place with floating point comparision errors (offending commit found through bisection). The functional change was that flush_thread() after this commit only calls restore_init_xstate() when both use_eager_fpu() and !used_math() are true. drop_init_fpu() (now fpu_reset_state()) calls restore_init_xstate() regardless of whether current used_math() - apply the same logic here. Switch used_math() -> tsk_used_math(tsk) to consistently use the grabbed tsk instead of current, like in the rest of flush_thread(). Tested-by: Dave Hansen Signed-off-by: Bobby Powers Signed-off-by: Borislav Petkov Acked-by: Oleg Nesterov Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Pekka Riikonen Cc: Quentin Casasnovas Cc: Rik van Riel Cc: Suresh Siddha Cc: Thomas Gleixner Fixes: f893959b ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()") Link: http://lkml.kernel.org/r/1430147441-9820-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index bfc99b3b6522..6e338e3b1dc0 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -156,11 +156,13 @@ void flush_thread(void) /* FPU state will be reallocated lazily at the first use. */ drop_fpu(tsk); free_thread_xstate(tsk); - } else if (!used_math()) { - /* kthread execs. TODO: cleanup this horror. */ - if (WARN_ON(init_fpu(tsk))) - force_sig(SIGKILL, tsk); - user_fpu_begin(); + } else { + if (!tsk_used_math(tsk)) { + /* kthread execs. TODO: cleanup this horror. */ + if (WARN_ON(init_fpu(tsk))) + force_sig(SIGKILL, tsk); + user_fpu_begin(); + } restore_init_xstate(); } } From bad4371d87d1d1ed1aecd9c9cc21c41ac3f289c8 Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Thu, 30 Apr 2015 02:03:51 +0900 Subject: [PATCH 306/652] mmc: sh_mmcif: Fix timeout value for command request f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") changed the timeout value from 1000 jiffies to 1s. In the case where HZ is 1000 the values are the same. However, for smaller HZ values the timeout is now smaller, 1s instead of 10s in the case of HZ=100. Since the timeout occurs in spite of a normal data transfer a timeout of 10s seems more appropriate. This restores the previous timeout in the case where HZ=100 and results in an increase over the previous timeout for larger values of HZ. Fixes: f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") Signed-off-by: Takeshi Kihara [horms: rewrote changelog to refer to HZ] Signed-off-by: Simon Horman Signed-off-by: Yoshihiro Kaneko Signed-off-by: Ulf Hansson --- drivers/mmc/host/sh_mmcif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 2b6ef6bd5d5f..7eff087cf515 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1408,7 +1408,7 @@ static int sh_mmcif_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->addr = reg; - host->timeout = msecs_to_jiffies(1000); + host->timeout = msecs_to_jiffies(10000); host->ccs_enable = !pd || !pd->ccs_unsupported; host->clk_ctrl2_enable = pd && pd->clk_ctrl2_present; From 4e93b9a6abc0d028daf3c8a00cb77b679d8a4df4 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Tue, 12 Aug 2014 12:01:30 +0800 Subject: [PATCH 307/652] mmc: card: Don't access RPMB partitions for normal read/write During kernel boot, it will try to read some logical sectors of each block device node for the possible partition table. But since RPMB partition is special and can not be accessed by normal eMMC read / write CMDs, it will cause below error messages during kernel boot: ... mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00 mmcblk0rpmb: retrying using single block read mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 end_request: I/O error, dev mmcblk0rpmb, sector 0 Buffer I/O error on device mmcblk0rpmb, logical block 0 end_request: I/O error, dev mmcblk0rpmb, sector 8 Buffer I/O error on device mmcblk0rpmb, logical block 1 end_request: I/O error, dev mmcblk0rpmb, sector 16 Buffer I/O error on device mmcblk0rpmb, logical block 2 end_request: I/O error, dev mmcblk0rpmb, sector 24 Buffer I/O error on device mmcblk0rpmb, logical block 3 ... This patch will discard the access request in eMMC queue if it is RPMB partition access request. By this way, it avoids trigger above error messages. Fixes: 090d25fe224c ("mmc: core: Expose access to RPMB partition") Signed-off-by: Yunpeng Gao Signed-off-by: Chuanxiao Dong Tested-by: Michael Shigorin Signed-off-by: Ulf Hansson --- drivers/mmc/card/block.c | 12 ++++++++++++ drivers/mmc/card/queue.c | 2 +- drivers/mmc/card/queue.h | 2 ++ 3 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 2c25271f8c41..60f7141a6b02 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1029,6 +1029,18 @@ static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type) md->reset_done &= ~type; } +int mmc_access_rpmb(struct mmc_queue *mq) +{ + struct mmc_blk_data *md = mq->data; + /* + * If this is a RPMB partition access, return ture + */ + if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) + return true; + + return false; +} + static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) { struct mmc_blk_data *md = mq->data; diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 236d194c2883..8efa3684aef8 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -38,7 +38,7 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) return BLKPREP_KILL; } - if (mq && mmc_card_removed(mq->card)) + if (mq && (mmc_card_removed(mq->card) || mmc_access_rpmb(mq))) return BLKPREP_KILL; req->cmd_flags |= REQ_DONTPREP; diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index 5752d50049a3..99e6521e6169 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -73,4 +73,6 @@ extern void mmc_queue_bounce_post(struct mmc_queue_req *); extern int mmc_packed_init(struct mmc_queue *, struct mmc_card *); extern void mmc_packed_clean(struct mmc_queue *); +extern int mmc_access_rpmb(struct mmc_queue *); + #endif From d2d05c65c40e067ca5898399069053f095c67d6f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 23 Apr 2015 16:54:17 -0700 Subject: [PATCH 308/652] gpio: omap: Fix regression for MPUIO interrupts At some point with all the GPIO clean-up we've broken the MPUIO interrupts. Those are just a little bit different from the GPIO interrupts, so we can fix it up just by setting different irqchip functions for it. And then we can just remove all old code trying to do the same. Cc: Aaro Koskinen Cc: Javier Martinez Canillas Cc: Kevin Hilman Cc: Nishanth Menon Signed-off-by: Tony Lindgren Reviewed-by: Grygorii Strashko Acked-by: Santosh Shilimkar Reviewed-by: Felipe Balbi Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 48 ++++++++-------------------------------- 1 file changed, 9 insertions(+), 39 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index cd1d5bf48f36..b232397ad7ec 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1054,38 +1054,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank) dev_err(bank->dev, "Could not get gpio dbck\n"); } -static void -omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, - unsigned int num) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base, - handle_simple_irq); - if (!gc) { - dev_err(bank->dev, "Memory alloc failed for gc\n"); - return; - } - - ct = gc->chip_types; - - /* NOTE: No ack required, reading IRQ status clears it. */ - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->chip.irq_set_type = omap_gpio_irq_type; - - if (bank->regs->wkup_en) - ct->chip.irq_set_wake = omap_gpio_wake_enable; - - ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride; - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); -} - static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc) { - int j; static int gpio; int irq_base = 0; int ret; @@ -1132,6 +1102,15 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc) } #endif + /* MPUIO is a bit different, reading IRQ status clears it */ + if (bank->is_mpuio) { + irqc->irq_ack = dummy_irq_chip.irq_ack; + irqc->irq_mask = irq_gc_mask_set_bit; + irqc->irq_unmask = irq_gc_mask_clr_bit; + if (!bank->regs->wkup_en) + irqc->irq_set_wake = NULL; + } + ret = gpiochip_irqchip_add(&bank->chip, irqc, irq_base, omap_gpio_irq_handler, IRQ_TYPE_NONE); @@ -1145,15 +1124,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc) gpiochip_set_chained_irqchip(&bank->chip, irqc, bank->irq, omap_gpio_irq_handler); - for (j = 0; j < bank->width; j++) { - int irq = irq_find_mapping(bank->chip.irqdomain, j); - if (bank->is_mpuio) { - omap_mpuio_alloc_gc(bank, irq, bank->width); - irq_set_chip_and_handler(irq, NULL, NULL); - set_irq_flags(irq, 0); - } - } - return 0; } From 8746515d7f04c9ea94cf43e2db1fd2cfca93276d Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 24 Apr 2015 10:16:40 +0100 Subject: [PATCH 309/652] xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM Make sure that xen_swiotlb_init allocates buffers that are DMA capable when at least one memblock is available below 4G. Otherwise we assume that all devices on the SoC can cope with >4G addresses. We do this on ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case. No functional changes on x86. From: Chen Baozi Signed-off-by: Chen Baozi Signed-off-by: Stefano Stabellini Tested-by: Chen Baozi Acked-by: Konrad Rzeszutek Wilk Signed-off-by: David Vrabel --- arch/arm/include/asm/xen/page.h | 1 + arch/arm/xen/mm.c | 15 +++++++++++++++ arch/x86/include/asm/xen/page.h | 5 +++++ drivers/xen/swiotlb-xen.c | 2 +- 4 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 2f7e6ff67d51..0b579b2f4e0e 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) bool xen_arch_need_swiotlb(struct device *dev, unsigned long pfn, unsigned long mfn); +unsigned long xen_get_swiotlb_free_pages(unsigned int order); #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 793551d15f1d..498325074a06 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -21,6 +22,20 @@ #include #include +unsigned long xen_get_swiotlb_free_pages(unsigned int order) +{ + struct memblock_region *reg; + gfp_t flags = __GFP_NOWARN; + + for_each_memblock(memory, reg) { + if (reg->base < (phys_addr_t)0xffffffff) { + flags |= __GFP_DMA; + break; + } + } + return __get_free_pages(flags, order); +} + enum dma_cache_op { DMA_UNMAP, DMA_MAP, diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 358dcd338915..c44a5d53e464 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -269,4 +269,9 @@ static inline bool xen_arch_need_swiotlb(struct device *dev, return false; } +static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order) +{ + return __get_free_pages(__GFP_NOWARN, order); +} + #endif /* _ASM_X86_XEN_PAGE_H */ diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 810ad419e34c..4c549323c605 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -235,7 +235,7 @@ retry: #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { - xen_io_tlb_start = (void *)__get_free_pages(__GFP_NOWARN, order); + xen_io_tlb_start = (void *)xen_get_swiotlb_free_pages(order); if (xen_io_tlb_start) break; order--; From c5272a28566b00cce79127ad382406e0a8650690 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Fri, 1 May 2015 09:01:27 -0700 Subject: [PATCH 310/652] pinctrl: Don't just pretend to protect pinctrl_maps, do it for real Way back, when the world was a simpler place and there was no war, no evil, and no kernel bugs, there was just a single pinctrl lock. That was how the world was when (57291ce pinctrl: core device tree mapping table parsing support) was written. In that case, there were instances where the pinctrl mutex was already held when pinctrl_register_map() was called, hence a "locked" parameter was passed to the function to indicate that the mutex was already locked (so we shouldn't lock it again). A few years ago in (42fed7b pinctrl: move subsystem mutex to pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex. ...but (oops) we forgot to re-think about the whole "locked" parameter for pinctrl_register_map(). Basically the "locked" parameter appears to still refer to whether the bigger pinctrl_dev mutex is locked, but we're using it to skip locks of our (now separate) pinctrl_maps_mutex. That's kind of a bad thing(TM). Probably nobody noticed because most of the calls to pinctrl_register_map happen at boot time and we've got synchronous device probing. ...and even cases where we're asynchronous don't end up actually hitting the race too often. ...but after banging my head against the wall for a bug that reproduced 1 out of 1000 reboots and lots of looking through kgdb, I finally noticed this. Anyway, we can now safely remove the "locked" parameter and go back to a war-free, evil-free, and kernel-bug-free world. Fixes: 42fed7ba44e4 ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 10 ++++------ drivers/pinctrl/core.h | 2 +- drivers/pinctrl/devicetree.c | 2 +- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 89dca77ca038..18ee2089df4a 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1110,7 +1110,7 @@ void devm_pinctrl_put(struct pinctrl *p) EXPORT_SYMBOL_GPL(devm_pinctrl_put); int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, - bool dup, bool locked) + bool dup) { int i, ret; struct pinctrl_maps *maps_node; @@ -1178,11 +1178,9 @@ int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, maps_node->maps = maps; } - if (!locked) - mutex_lock(&pinctrl_maps_mutex); + mutex_lock(&pinctrl_maps_mutex); list_add_tail(&maps_node->node, &pinctrl_maps); - if (!locked) - mutex_unlock(&pinctrl_maps_mutex); + mutex_unlock(&pinctrl_maps_mutex); return 0; } @@ -1197,7 +1195,7 @@ int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, int pinctrl_register_mappings(struct pinctrl_map const *maps, unsigned num_maps) { - return pinctrl_register_map(maps, num_maps, true, false); + return pinctrl_register_map(maps, num_maps, true); } void pinctrl_unregister_map(struct pinctrl_map const *map) diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 75476b3d87da..b24ea846c867 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -183,7 +183,7 @@ static inline struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, } int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, - bool dup, bool locked); + bool dup); void pinctrl_unregister_map(struct pinctrl_map const *map); extern int pinctrl_force_sleep(struct pinctrl_dev *pctldev); diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c index eda13de2e7c0..0bbf7d71b281 100644 --- a/drivers/pinctrl/devicetree.c +++ b/drivers/pinctrl/devicetree.c @@ -92,7 +92,7 @@ static int dt_remember_or_free_map(struct pinctrl *p, const char *statename, dt_map->num_maps = num_maps; list_add_tail(&dt_map->node, &p->dt_maps); - return pinctrl_register_map(map, num_maps, false, true); + return pinctrl_register_map(map, num_maps, false); } struct pinctrl_dev *of_pinctrl_get(struct device_node *np) From 0ff28d9f4674d781e492bcff6f32f0fe48cf0fed Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 6 May 2015 17:26:47 +0200 Subject: [PATCH 311/652] splice: sendfile() at once fails for big files Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ #include #include #include #include #include #include #include #include #include int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by: Christophe Leroy Signed-off-by: Jens Axboe --- fs/splice.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/splice.c b/fs/splice.c index 476024bb6546..bfe62ae40f40 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -1161,7 +1161,7 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, long ret, bytes; umode_t i_mode; size_t len; - int i, flags; + int i, flags, more; /* * We require the input being a regular file, as we don't want to @@ -1204,6 +1204,7 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, * Don't block on output, we have to drain the direct pipe. */ sd->flags &= ~SPLICE_F_NONBLOCK; + more = sd->flags & SPLICE_F_MORE; while (len) { size_t read_len; @@ -1216,6 +1217,15 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, read_len = ret; sd->total_len = read_len; + /* + * If more data is pending, set SPLICE_F_MORE + * If this is the last data and SPLICE_F_MORE was not set + * initially, clears it. + */ + if (read_len < len) + sd->flags |= SPLICE_F_MORE; + else if (!more) + sd->flags &= ~SPLICE_F_MORE; /* * NOTE: nonblocking mode only applies to the input. We * must not do the output in nonblocking mode as then we From 98fb1ffd8154890d7051750e61ff5548c3ee2ab2 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Wed, 22 Apr 2015 09:30:53 -0300 Subject: [PATCH 312/652] UBI: block: Add missing cache flushes Block drivers are responsible for calling flush_dcache_page() on each BIO request. This operation keeps the I$ coherent with the D$ on architectures that don't have hardware coherency support. Without this flush, random crashes are seen when executing user programs from an ext4 filesystem backed by a ubiblock device. This patch is based on the change implemented in commit 2d4dc890b5c8 ("block: add helpers to run flush_dcache_page() against a bio and a request's pages"). Fixes: 9d54c8a33eec ("UBI: R/O block driver on top of UBI volumes") Signed-off-by: Kevin Cernekee Signed-off-by: Ezequiel Garcia Signed-off-by: Richard Weinberger --- drivers/mtd/ubi/block.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c index db2c05b6fe7f..c9eb78f10a0d 100644 --- a/drivers/mtd/ubi/block.c +++ b/drivers/mtd/ubi/block.c @@ -310,6 +310,8 @@ static void ubiblock_do_work(struct work_struct *work) blk_rq_map_sg(req->q, req, pdu->usgl.sg); ret = ubiblock_read(pdu); + rq_flush_dcache_pages(req); + blk_mq_end_request(req, ret); } From d2a5d46b167a9a8231264daf80165b739aecf1d7 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 15 Apr 2015 22:26:36 +0800 Subject: [PATCH 313/652] clk: add missing lock when call clk_core_enable in clk_set_parent Before commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances") we acquired the enable_lock in __clk_set_parent_{before,after}() by means of calling clk_enable(). After commit 035a61c314eb we use clk_core_enable() in place of the clk_enable(), and clk_core_enable() doesn't acquire the enable_lock. This opens up a race condition between clk_set_parent() and clk_enable(). Fix it. Fixes: 035a61c314eb ("clk: Make clk API return per-user struct clk instances") Cc: Mike Turquette Cc: Stephen Boyd Signed-off-by: Dong Aisheng Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 459ce9da13e0..5b0f41868b42 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1475,8 +1475,10 @@ static struct clk_core *__clk_set_parent_before(struct clk_core *clk, */ if (clk->prepare_count) { clk_core_prepare(parent); + flags = clk_enable_lock(); clk_core_enable(parent); clk_core_enable(clk); + clk_enable_unlock(flags); } /* update the clk tree topology */ @@ -1491,13 +1493,17 @@ static void __clk_set_parent_after(struct clk_core *core, struct clk_core *parent, struct clk_core *old_parent) { + unsigned long flags; + /* * Finish the migration of prepare state and undo the changes done * for preventing a race with clk_enable(). */ if (core->prepare_count) { + flags = clk_enable_lock(); clk_core_disable(core); clk_core_disable(old_parent); + clk_enable_unlock(flags); clk_core_unprepare(old_parent); } } @@ -1525,8 +1531,10 @@ static int __clk_set_parent(struct clk_core *clk, struct clk_core *parent, clk_enable_unlock(flags); if (clk->prepare_count) { + flags = clk_enable_lock(); clk_core_disable(clk); clk_core_disable(parent); + clk_enable_unlock(flags); clk_core_unprepare(parent); } return ret; From 1d3c61c2eb3fe4f96d3192212f1bdcee49ea55aa Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 6 May 2015 11:17:01 +0100 Subject: [PATCH 314/652] Btrfs: fix wrong mapping flags for free space inode We were passing a flags value that differed from the intention in commit 2b108268006e ("Btrfs: don't use highmem for free space cache pages"). This caused problems in a ARM machine, leaving btrfs unusable there. Reported-by: Merlijn Wajer Tested-by: Merlijn Wajer Signed-off-by: Filipe Manana Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 41c510b7cc11..5e020d76fd07 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -86,7 +86,7 @@ static struct inode *__lookup_free_space_inode(struct btrfs_root *root, mapping_set_gfp_mask(inode->i_mapping, mapping_gfp_mask(inode->i_mapping) & - ~(GFP_NOFS & ~__GFP_HIGHMEM)); + ~(__GFP_FS | __GFP_HIGHMEM)); return inode; } From ac01ce1410fc2c7b5f3af5e9c972e6a412eee54f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alex=20Benn=C3=A9e?= Date: Wed, 29 Apr 2015 16:18:46 +0100 Subject: [PATCH 315/652] tracing: Make ftrace_print_array_seq compute buf_len MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The only caller to this function (__print_array) was getting it wrong by passing the array length instead of buffer length. As the element size was already being passed for other reasons it seems reasonable to push the calculation of buffer length into the function. Link: http://lkml.kernel.org/r/1430320727-14582-1-git-send-email-alex.bennee@linaro.org Signed-off-by: Alex Bennée Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 2 +- kernel/trace/trace_output.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 46e83c2156c6..f9ecf63d47f1 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -46,7 +46,7 @@ const char *ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int len); const char *ftrace_print_array_seq(struct trace_seq *p, - const void *buf, int buf_len, + const void *buf, int count, size_t el_size); struct trace_iterator; diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 692bf7184c8c..25a086bcb700 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -178,12 +178,13 @@ ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int buf_len) EXPORT_SYMBOL(ftrace_print_hex_seq); const char * -ftrace_print_array_seq(struct trace_seq *p, const void *buf, int buf_len, +ftrace_print_array_seq(struct trace_seq *p, const void *buf, int count, size_t el_size) { const char *ret = trace_seq_buffer_ptr(p); const char *prefix = ""; void *ptr = (void *)buf; + size_t buf_len = count * el_size; trace_seq_putc(p, '{'); From ac02c6ea6b404461829697792cd2b67f6a14d28a Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 4 May 2015 11:00:16 +0200 Subject: [PATCH 316/652] crypto: arm64/crc32 - bring in line with generic CRC32 The arm64 CRC32 (not CRC32c) implementation was not quite doing the same thing as the generic one. Fix that. Signed-off-by: Ard Biesheuvel Acked-by: Steve Capper Signed-off-by: Herbert Xu --- arch/arm64/crypto/crc32-arm64.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/arch/arm64/crypto/crc32-arm64.c b/arch/arm64/crypto/crc32-arm64.c index 9499199924ae..6a37c3c6b11d 100644 --- a/arch/arm64/crypto/crc32-arm64.c +++ b/arch/arm64/crypto/crc32-arm64.c @@ -147,13 +147,21 @@ static int chksum_final(struct shash_desc *desc, u8 *out) { struct chksum_desc_ctx *ctx = shash_desc_ctx(desc); + put_unaligned_le32(ctx->crc, out); + return 0; +} + +static int chksumc_final(struct shash_desc *desc, u8 *out) +{ + struct chksum_desc_ctx *ctx = shash_desc_ctx(desc); + put_unaligned_le32(~ctx->crc, out); return 0; } static int __chksum_finup(u32 crc, const u8 *data, unsigned int len, u8 *out) { - put_unaligned_le32(~crc32_arm64_le_hw(crc, data, len), out); + put_unaligned_le32(crc32_arm64_le_hw(crc, data, len), out); return 0; } @@ -199,6 +207,14 @@ static int crc32_cra_init(struct crypto_tfm *tfm) { struct chksum_ctx *mctx = crypto_tfm_ctx(tfm); + mctx->key = 0; + return 0; +} + +static int crc32c_cra_init(struct crypto_tfm *tfm) +{ + struct chksum_ctx *mctx = crypto_tfm_ctx(tfm); + mctx->key = ~0; return 0; } @@ -229,7 +245,7 @@ static struct shash_alg crc32c_alg = { .setkey = chksum_setkey, .init = chksum_init, .update = chksumc_update, - .final = chksum_final, + .final = chksumc_final, .finup = chksumc_finup, .digest = chksumc_digest, .descsize = sizeof(struct chksum_desc_ctx), @@ -241,7 +257,7 @@ static struct shash_alg crc32c_alg = { .cra_alignmask = 0, .cra_ctxsize = sizeof(struct chksum_ctx), .cra_module = THIS_MODULE, - .cra_init = crc32_cra_init, + .cra_init = crc32c_cra_init, } }; From bf7883ebcb9c0880b8f5d22c1435a3de15283f0a Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 6 May 2015 15:54:31 +0200 Subject: [PATCH 317/652] crypto: arm64/sha1-ce - prevent asm code finalization in final() path Ensure that the asm code finalization path is not triggered when invoked via final(), since it already takes care of that itself. Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu --- arch/arm64/crypto/sha1-ce-glue.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c index 114e7cc5de8c..aefda9868627 100644 --- a/arch/arm64/crypto/sha1-ce-glue.c +++ b/arch/arm64/crypto/sha1-ce-glue.c @@ -74,6 +74,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, static int sha1_ce_final(struct shash_desc *desc, u8 *out) { + struct sha1_ce_state *sctx = shash_desc_ctx(desc); + + sctx->finalize = 0; kernel_neon_begin_partial(16); sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_ce_transform); kernel_neon_end(); From ec59a65d694e5fd99d76565b93468c99ae8dff79 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 6 May 2015 15:54:32 +0200 Subject: [PATCH 318/652] crypto: arm64/sha2-ce - prevent asm code finalization in final() path Ensure that the asm code finalization path is not triggered when invoked via final(), since it already takes care of that itself. Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu --- arch/arm64/crypto/sha2-ce-glue.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c index 1340e44c048b..7cd587564a41 100644 --- a/arch/arm64/crypto/sha2-ce-glue.c +++ b/arch/arm64/crypto/sha2-ce-glue.c @@ -75,6 +75,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, static int sha256_ce_final(struct shash_desc *desc, u8 *out) { + struct sha256_ce_state *sctx = shash_desc_ctx(desc); + + sctx->finalize = 0; kernel_neon_begin_partial(28); sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform); kernel_neon_end(); From 5006c1052aafa01dab5b0e643b7dac755b41f3bb Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 May 2015 15:01:31 -0400 Subject: [PATCH 319/652] Revert "HID: logitech-hidpp: support combo keyboard touchpad TK820" This reverts commit 3a61e97563d78a2ca10752902449570d8433ce76. The Logitech TK820 seems to be affected by a firmware bug which delays the sending of the keys (pressed, or released, which triggers a key-repeat) while holding fingers on the touch sensor. This behavior can be observed while using the mouse emulation mode if the user moves the finger while typing (highly improbable though). Holding the finger still while in the mouse emulation mode does not trigger the key repeat problem. So better keep things in their previous state to not have to explain users that the new key-repeat bug they see is a "feature". Furthermore, I noticed that I disabled the media keys whith this patch. Sorry, my bad. I think it is best to revert the patch, in all the current versions it has been shipped. Cc: # v3.19 and above Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index b3cf6fd4be96..5fd530acf747 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -44,7 +44,6 @@ MODULE_PARM_DESC(disable_raw_mode, /* bits 1..20 are reserved for classes */ #define HIDPP_QUIRK_DELAYED_INIT BIT(21) #define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS BIT(22) -#define HIDPP_QUIRK_MULTI_INPUT BIT(23) /* * There are two hidpp protocols in use, the first version hidpp10 is known @@ -706,12 +705,6 @@ static int wtp_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { - struct hidpp_device *hidpp = hid_get_drvdata(hdev); - - if ((hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) && - (field->application == HID_GD_KEYBOARD)) - return 0; - return -1; } @@ -720,10 +713,6 @@ static void wtp_populate_input(struct hidpp_device *hidpp, { struct wtp_data *wd = hidpp->private_data; - if ((hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) && origin_is_hid_core) - /* this is the generic hid-input call */ - return; - __set_bit(EV_ABS, input_dev->evbit); __set_bit(EV_KEY, input_dev->evbit); __clear_bit(EV_REL, input_dev->evbit); @@ -1245,10 +1234,6 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id) if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) connect_mask &= ~HID_CONNECT_HIDINPUT; - /* Re-enable hidinput for multi-input devices */ - if (hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) - connect_mask |= HID_CONNECT_HIDINPUT; - ret = hid_hw_start(hdev, connect_mask); if (ret) { hid_err(hdev, "%s:hid_hw_start returned error\n", __func__); @@ -1296,11 +1281,6 @@ static const struct hid_device_id hidpp_devices[] = { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651), .driver_data = HIDPP_QUIRK_CLASS_WTP }, - { /* Keyboard TK820 */ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, 0x4102), - .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_MULTI_INPUT | - HIDPP_QUIRK_CLASS_WTP }, { HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, USB_VENDOR_ID_LOGITECH, HID_ANY_ID)}, From af77b9741300616e7d04264d0ee7ac9f8abb448f Mon Sep 17 00:00:00 2001 From: Sonika Jindal Date: Thu, 7 May 2015 13:59:28 +0530 Subject: [PATCH 320/652] drm/i915: Sink rate read should be saved in deca-kHz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sink rate read from supported link rate table is in KHz as per spec while in drm, the saved clock is in deca-KHz. So divide the link rate by 10 before storing. Reading of rates was added by: commit fc0f8e25318f ("drm/i915/skl: Read sink supported rates from edp panel") Cc: Ville Syrjälä Signed-off-by: Sonika Jindal Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8d534f409b23..f27346e907b1 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3812,7 +3812,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) if (val == 0) break; - intel_dp->sink_rates[i] = val * 200; + /* Value read is in kHz while drm clock is saved in deca-kHz */ + intel_dp->sink_rates[i] = (val * 200) / 10; } intel_dp->num_sink_rates = i; } From 0e81bc99a0826db4cd2d6ba9a982579b1467a79f Mon Sep 17 00:00:00 2001 From: Michael Welling Date: Wed, 6 May 2015 11:49:17 -0500 Subject: [PATCH 321/652] iio: mcp320x: Fix occasional incorrect readings Without the cacheline alignment, the readings will occasionally incorrectly return 0. Signed-off-by: Michael Welling Signed-off-by: Jonathan Cameron --- drivers/iio/adc/mcp320x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index efbfd12a4bfd..8d9c9b9215dd 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -60,12 +60,12 @@ struct mcp320x { struct spi_message msg; struct spi_transfer transfer[2]; - u8 tx_buf; - u8 rx_buf[2]; - struct regulator *reg; struct mutex lock; const struct mcp320x_chip_info *chip_info; + + u8 tx_buf ____cacheline_aligned; + u8 rx_buf[2]; }; static int mcp320x_channel_to_tx_data(int device_index, From a3bd92519879ddc3052140e6776173f266c934eb Mon Sep 17 00:00:00 2001 From: "Fang, Yang A" Date: Thu, 23 Apr 2015 16:35:17 -0700 Subject: [PATCH 322/652] ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 69528ae5410c..61ca49fbf1ec 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -2656,6 +2657,15 @@ static const struct i2c_device_id rt5645_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id); +#ifdef CONFIG_ACPI +static struct acpi_device_id rt5645_acpi_match[] = { + { "10EC5645", 0 }, + { "10EC5650", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, rt5645_acpi_match); +#endif + static int rt5645_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -2872,6 +2882,7 @@ static struct i2c_driver rt5645_i2c_driver = { .driver = { .name = "rt5645", .owner = THIS_MODULE, + .acpi_match_table = ACPI_PTR(rt5645_acpi_match), }, .probe = rt5645_i2c_probe, .remove = rt5645_i2c_remove, From 5023281b1870fdc99bddf95a7bc00b801801d13e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 21 Apr 2015 12:19:49 +0800 Subject: [PATCH 323/652] ASoC: rt5645: Fix mask for setting RT5645_DMIC_2_DP_GPIO12 bit Current code uses wrong mask when setting RT5645_DMIC_2_DP_GPIO12 bit, fix it. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 61ca49fbf1ec..be4d741c45ba 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2780,7 +2780,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, case RT5645_DMIC_DATA_GPIO12: regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_1_DP_MASK, RT5645_DMIC_2_DP_GPIO12); + RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO12); regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, RT5645_GP12_PIN_MASK, RT5645_GP12_PIN_DMIC2_SDA); From c0a06ee185f2b785c7bd44c4fb6fcae80f7d1a54 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 13 Apr 2015 18:15:10 +0900 Subject: [PATCH 324/652] igb: Fix oops on changing number of rings When changing the number of rings by ethtool -L, q_vectors are reused, which causes oops because of uninitialized pointers. - When an rx is reused as a tx, q_vector->rx.ring is not set to NULL, which misleads igb_poll() to determine that it has an rx ring although it actually points to the tx ring. - When a tx is reused as an rx, q_vector->rx.ring->skb (q_vector->ring[0].skb) has a value that was used as tx_stats before. Fix these problems by zeroing it out on reuseing it. Fixes: 02ef6e1d0b00 ("igb: Fix queue allocation method to accommodate changing during runtime") Signed-off-by: Toshiaki Makita Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 8457d0306e3a..783d60eafcd6 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1207,6 +1207,8 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter, q_vector = adapter->q_vector[v_idx]; if (!q_vector) q_vector = kzalloc(size, GFP_KERNEL); + else + memset(q_vector, 0, size); if (!q_vector) return -ENOMEM; From 2439fc4d71f71b47c8ace1f42eb46039222282a0 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 13 Apr 2015 18:15:11 +0900 Subject: [PATCH 325/652] igb: Fix NULL assignment to incorrect variable in igb_reset_q_vector adapter->tx_ring is set to NULL where rx_ring should be. Fixes: 5536d2102a2d ("igb: Combine q_vector and ring allocation into a single function") Signed-off-by: Toshiaki Makita Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 783d60eafcd6..a0a9b1fcb5e8 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1036,7 +1036,7 @@ static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx) adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; if (q_vector->rx.ring) - adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL; + adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL; netif_napi_del(&q_vector->napi); From 736a69ca8c99a595a523d2fece66491b89168da6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 7 May 2015 11:16:26 +0100 Subject: [PATCH 326/652] drm/i915: Drop PIPE-A quirk for 945GSE HP Mini Since the introduction of BIOS fb preservation, circa 3.17, we began encountering a failure during boot when trying to use force-detect before GEM was initialised. That bug is from commit 7fad798e16fecddd41c6a91728a09f0b9507e40c Author: Daniel Vetter Date: Wed Jul 4 17:51:47 2012 +0200 drm/i915: ensure the force pipe A quirk is actually followed but investigation of the affected machine revealed that it was using a PIPE-A quirk even though it was a 945GSE and the quirk is only supposed to be used to workaround a hardware issue on 830/845. That quirk was added for this HP Mini in commit 6b93afc564a5e74b0eaaa46c95f557449951b3b9 Author: Bryce Harrington Date: Wed May 27 03:40:52 2009 -0700 add pipe a force quirk for Dell mini in order to workaround an issue with the BIOS behaving strangely during lid-close. Since then we have a much larger hammer to thwart the BIOS after opening the lid and the PIPE-A quirk is no longer required. Reported-and-tested-by: Apostolos B. References: https://bugs.freedesktop.org/show_bug.cgi?id=21960 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=87521 Signed-off-by: Chris Wilson Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d547d9c8dda2..d0f3cbc87474 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13635,9 +13635,6 @@ static const struct intel_dmi_quirk intel_dmi_quirks[] = { }; static struct intel_quirk intel_quirks[] = { - /* HP Mini needs pipe A force quirk (LP: #322104) */ - { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, - /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, From 1e5ec956a057585adaa1365615c82810b2f5356f Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Tue, 14 Apr 2015 14:13:18 +0300 Subject: [PATCH 327/652] drm/amdkfd: allow unregister process with queues Sometimes we might unregister process that have queues, because we couldn't preempt the queues. Until now we blocked it with BUG_ON but instead just print it as debug. Reviewed-by: Ben Goz Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 69af73f15310..7b1d5109e9f2 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -430,9 +430,10 @@ static int unregister_process_nocpsch(struct device_queue_manager *dqm, BUG_ON(!dqm || !qpd); - BUG_ON(!list_empty(&qpd->queues_list)); + pr_debug("In func %s\n", __func__); - pr_debug("kfd: In func %s\n", __func__); + pr_debug("qpd->queues_list is %s\n", + list_empty(&qpd->queues_list) ? "empty" : "not empty"); retval = 0; mutex_lock(&dqm->lock); From 42e08c78360e58516b6ac8af18a75a494f2967a2 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Tue, 5 May 2015 11:15:07 +0300 Subject: [PATCH 328/652] drm/amdkfd: Don't report local memory size This patch sets the local memory size that is reported to userspace to 0. This is done to make sure that userspace won't try to allocate local memory for HSA. As long as amdkfd doesn't support allocating local memory for HSA, we need this patch. Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c index 661c6605d31b..e469c4b2e8cc 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c @@ -728,9 +728,9 @@ static ssize_t node_show(struct kobject *kobj, struct attribute *attr, sysfs_show_32bit_prop(buffer, "max_engine_clk_fcompute", dev->gpu->kfd2kgd->get_max_engine_clock_in_mhz( dev->gpu->kgd)); + sysfs_show_64bit_prop(buffer, "local_mem_size", - dev->gpu->kfd2kgd->get_vmem_size( - dev->gpu->kgd)); + (unsigned long long int) 0); sysfs_show_32bit_prop(buffer, "fw_version", dev->gpu->kfd2kgd->get_fw_version( From 79b066bd76d501cfe8328142153da301f5ca11d1 Mon Sep 17 00:00:00 2001 From: Xihan Zhang Date: Tue, 28 Apr 2015 23:48:40 +0800 Subject: [PATCH 329/652] drm/amdkfd: Initialize sdma vm when creating sdma queue This patch fixes a bug where sdma vm wasn't initialized when an sdma queue was created in HWS mode. This caused GPUVM faults to appear on dmesg and it is one of the causes that SDMA queues are not working. Signed-off-by: Xihan Zhang Reviewed-by: Ben Goz Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 7b1d5109e9f2..596ee5cd3b84 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -883,6 +883,8 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, return -ENOMEM; } + init_sdma_vm(dqm, q, qpd); + retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj, &q->gart_mqd_addr, &q->properties); if (retval != 0) From db12973cd581d4e79f4aadd0960948f268d15af7 Mon Sep 17 00:00:00 2001 From: "monk.liu" Date: Tue, 5 May 2015 09:24:17 +0200 Subject: [PATCH 330/652] drm/radeon: fix userptr BO unpin bug v3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixing a memory leak with userptrs. v2: clean up the loop, use an iterator instead v3: remove unused variable Signed-off-by: monk.liu Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_ttm.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index b292aca0f342..edafd3c2b170 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -591,8 +591,7 @@ static void radeon_ttm_tt_unpin_userptr(struct ttm_tt *ttm) { struct radeon_device *rdev = radeon_get_rdev(ttm->bdev); struct radeon_ttm_tt *gtt = (void *)ttm; - struct scatterlist *sg; - int i; + struct sg_page_iter sg_iter; int write = !(gtt->userflags & RADEON_GEM_USERPTR_READONLY); enum dma_data_direction direction = write ? @@ -605,9 +604,8 @@ static void radeon_ttm_tt_unpin_userptr(struct ttm_tt *ttm) /* free the sg table and pages again */ dma_unmap_sg(rdev->dev, ttm->sg->sgl, ttm->sg->nents, direction); - for_each_sg(ttm->sg->sgl, sg, ttm->sg->nents, i) { - struct page *page = sg_page(sg); - + for_each_sg_page(ttm->sg->sgl, &sg_iter, ttm->sg->nents, 0) { + struct page *page = sg_page_iter_page(&sg_iter); if (!(gtt->userflags & RADEON_GEM_USERPTR_READONLY)) set_page_dirty(page); From 247c405098ab731ad9b58971e2cfbab116b54b45 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 5 May 2015 09:52:12 +0200 Subject: [PATCH 331/652] drm/radeon: fix userptr lockup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We shouldn't try to reserve and wait for a BO that isn't bound. Otherwise we can run into a deadlock if we have a fault during binding the BO. Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_mn.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_mn.c b/drivers/gpu/drm/radeon/radeon_mn.c index 535bf404b725..eef006c48584 100644 --- a/drivers/gpu/drm/radeon/radeon_mn.c +++ b/drivers/gpu/drm/radeon/radeon_mn.c @@ -142,6 +142,9 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn, list_for_each_entry(bo, &node->bos, mn_list) { + if (!bo->tbo.ttm || bo->tbo.ttm->state != tt_bound) + continue; + r = radeon_bo_reserve(bo, true); if (r) { DRM_ERROR("(%ld) failed to reserve user bo\n", r); From 29c63fe22a17c64e54016040cd882481bd45ee5a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:22 +0200 Subject: [PATCH 332/652] drm/radeon: make VCE handle check more strict MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Invalid handles can crash the hw. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_vce.c | 65 +++++++++++++++++++++-------- 1 file changed, 48 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_vce.c b/drivers/gpu/drm/radeon/radeon_vce.c index 24f849f888bb..0de5711ac508 100644 --- a/drivers/gpu/drm/radeon/radeon_vce.c +++ b/drivers/gpu/drm/radeon/radeon_vce.c @@ -493,18 +493,27 @@ int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi, * * @p: parser context * @handle: handle to validate + * @allocated: allocated a new handle? * * Validates the handle and return the found session index or -EINVAL * we we don't have another free session index. */ -int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle) +static int radeon_vce_validate_handle(struct radeon_cs_parser *p, + uint32_t handle, bool *allocated) { unsigned i; + *allocated = false; + /* validate the handle */ for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) { - if (atomic_read(&p->rdev->vce.handles[i]) == handle) + if (atomic_read(&p->rdev->vce.handles[i]) == handle) { + if (p->rdev->vce.filp[i] != p->filp) { + DRM_ERROR("VCE handle collision detected!\n"); + return -EINVAL; + } return i; + } } /* handle not found try to alloc a new one */ @@ -512,6 +521,7 @@ int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle) if (!atomic_cmpxchg(&p->rdev->vce.handles[i], 0, handle)) { p->rdev->vce.filp[i] = p->filp; p->rdev->vce.img_size[i] = 0; + *allocated = true; return i; } } @@ -529,10 +539,10 @@ int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle) int radeon_vce_cs_parse(struct radeon_cs_parser *p) { int session_idx = -1; - bool destroyed = false; + bool destroyed = false, created = false, allocated = false; uint32_t tmp, handle = 0; uint32_t *size = &tmp; - int i, r; + int i, r = 0; while (p->idx < p->chunk_ib->length_dw) { uint32_t len = radeon_get_ib_value(p, p->idx); @@ -540,18 +550,21 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) if ((len < 8) || (len & 3)) { DRM_ERROR("invalid VCE command length (%d)!\n", len); - return -EINVAL; + r = -EINVAL; + goto out; } if (destroyed) { DRM_ERROR("No other command allowed after destroy!\n"); - return -EINVAL; + r = -EINVAL; + goto out; } switch (cmd) { case 0x00000001: // session handle = radeon_get_ib_value(p, p->idx + 2); - session_idx = radeon_vce_validate_handle(p, handle); + session_idx = radeon_vce_validate_handle(p, handle, + &allocated); if (session_idx < 0) return session_idx; size = &p->rdev->vce.img_size[session_idx]; @@ -561,6 +574,13 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) break; case 0x01000001: // create + created = true; + if (!allocated) { + DRM_ERROR("Handle already in use!\n"); + r = -EINVAL; + goto out; + } + *size = radeon_get_ib_value(p, p->idx + 8) * radeon_get_ib_value(p, p->idx + 10) * 8 * 3 / 2; @@ -578,12 +598,12 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) r = radeon_vce_cs_reloc(p, p->idx + 10, p->idx + 9, *size); if (r) - return r; + goto out; r = radeon_vce_cs_reloc(p, p->idx + 12, p->idx + 11, *size / 3); if (r) - return r; + goto out; break; case 0x02000001: // destroy @@ -594,7 +614,7 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, *size * 2); if (r) - return r; + goto out; break; case 0x05000004: // video bitstream buffer @@ -602,36 +622,47 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, tmp); if (r) - return r; + goto out; break; case 0x05000005: // feedback buffer r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, 4096); if (r) - return r; + goto out; break; default: DRM_ERROR("invalid VCE command (0x%x)!\n", cmd); - return -EINVAL; + r = -EINVAL; + goto out; } if (session_idx == -1) { DRM_ERROR("no session command at start of IB\n"); - return -EINVAL; + r = -EINVAL; + goto out; } p->idx += len / 4; } - if (destroyed) { - /* IB contains a destroy msg, free the handle */ + if (allocated && !created) { + DRM_ERROR("New session without create command!\n"); + r = -ENOENT; + } + +out: + if ((!r && destroyed) || (r && allocated)) { + /* + * IB contains a destroy msg or we have allocated an + * handle and got an error, anyway free the handle + */ for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) atomic_cmpxchg(&p->rdev->vce.handles[i], handle, 0); } - return 0; + return r; } /** From a1b403da70e038ca6c6c6fe434d1d873546873a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:23 +0200 Subject: [PATCH 333/652] drm/radeon: make UVD handle checking more strict MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Invalid messages can crash the hw otherwise. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_uvd.c | 72 +++++++++++++++++------------ 1 file changed, 43 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index c10b2aec6450..f67a6aae0010 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -436,50 +436,64 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, return -EINVAL; } - if (msg_type == 1) { + switch (msg_type) { + case 0: + /* it's a create msg, calc image size (width * height) */ + img_size = msg[7] * msg[8]; + radeon_bo_kunmap(bo); + + /* try to alloc a new handle */ + for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { + if (atomic_read(&p->rdev->uvd.handles[i]) == handle) { + DRM_ERROR("Handle 0x%x already in use!\n", handle); + return -EINVAL; + } + + if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) { + p->rdev->uvd.filp[i] = p->filp; + p->rdev->uvd.img_size[i] = img_size; + return 0; + } + } + + DRM_ERROR("No more free UVD handles!\n"); + return -EINVAL; + + case 1: /* it's a decode msg, calc buffer sizes */ r = radeon_uvd_cs_msg_decode(msg, buf_sizes); - /* calc image size (width * height) */ - img_size = msg[6] * msg[7]; radeon_bo_kunmap(bo); if (r) return r; - } else if (msg_type == 2) { + /* validate the handle */ + for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { + if (atomic_read(&p->rdev->uvd.handles[i]) == handle) { + if (p->rdev->uvd.filp[i] != p->filp) { + DRM_ERROR("UVD handle collision detected!\n"); + return -EINVAL; + } + return 0; + } + } + + DRM_ERROR("Invalid UVD handle 0x%x!\n", handle); + return -ENOENT; + + case 2: /* it's a destroy msg, free the handle */ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) atomic_cmpxchg(&p->rdev->uvd.handles[i], handle, 0); radeon_bo_kunmap(bo); return 0; - } else { - /* it's a create msg, calc image size (width * height) */ - img_size = msg[7] * msg[8]; - radeon_bo_kunmap(bo); - if (msg_type != 0) { - DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type); - return -EINVAL; - } + default: - /* it's a create msg, no special handling needed */ + DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type); + return -EINVAL; } - /* create or decode, validate the handle */ - for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { - if (atomic_read(&p->rdev->uvd.handles[i]) == handle) - return 0; - } - - /* handle not found try to alloc a new one */ - for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { - if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) { - p->rdev->uvd.filp[i] = p->filp; - p->rdev->uvd.img_size[i] = img_size; - return 0; - } - } - - DRM_ERROR("No more free UVD handles!\n"); + BUG(); return -EINVAL; } From d52cdfa4a0c6406bbfb33206341eaf1fb1555994 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:24 +0200 Subject: [PATCH 334/652] drm/radeon: more strictly validate the UVD codec MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MPEG 2/4 are only supported since UVD3. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_uvd.c | 33 +++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index f67a6aae0010..cd630287cf0a 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -396,6 +396,29 @@ static int radeon_uvd_cs_msg_decode(uint32_t *msg, unsigned buf_sizes[]) return 0; } +static int radeon_uvd_validate_codec(struct radeon_cs_parser *p, + unsigned stream_type) +{ + switch (stream_type) { + case 0: /* H264 */ + case 1: /* VC1 */ + /* always supported */ + return 0; + + case 3: /* MPEG2 */ + case 4: /* MPEG4 */ + /* only since UVD 3 */ + if (p->rdev->family >= CHIP_PALM) + return 0; + + /* fall through */ + default: + DRM_ERROR("UVD codec not supported by hardware %d!\n", + stream_type); + return -EINVAL; + } +} + static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, unsigned offset, unsigned buf_sizes[]) { @@ -440,7 +463,11 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, case 0: /* it's a create msg, calc image size (width * height) */ img_size = msg[7] * msg[8]; + + r = radeon_uvd_validate_codec(p, msg[4]); radeon_bo_kunmap(bo); + if (r) + return r; /* try to alloc a new handle */ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { @@ -460,8 +487,10 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, return -EINVAL; case 1: - /* it's a decode msg, calc buffer sizes */ - r = radeon_uvd_cs_msg_decode(msg, buf_sizes); + /* it's a decode msg, validate codec and calc buffer sizes */ + r = radeon_uvd_validate_codec(p, msg[4]); + if (!r) + r = radeon_uvd_cs_msg_decode(msg, buf_sizes); radeon_bo_kunmap(bo); if (r) return r; From 12e49feadff6d7b7ebbe852b36943a71524d8d34 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:25 +0200 Subject: [PATCH 335/652] drm/radeon: stop trying to suspend UVD sessions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Saving the current UVD state on suspend and restoring it on resume just doesn't work reliable. Just close cleanup all sessions on suspend. Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 1 - drivers/gpu/drm/radeon/radeon_uvd.c | 39 ++++++++++++++--------------- 2 files changed, 19 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index d2abe481954f..46eb0fa75a61 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1673,7 +1673,6 @@ struct radeon_uvd { struct radeon_bo *vcpu_bo; void *cpu_addr; uint64_t gpu_addr; - void *saved_bo; atomic_t handles[RADEON_MAX_UVD_HANDLES]; struct drm_file *filp[RADEON_MAX_UVD_HANDLES]; unsigned img_size[RADEON_MAX_UVD_HANDLES]; diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index cd630287cf0a..6edcb5485092 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -204,28 +204,32 @@ void radeon_uvd_fini(struct radeon_device *rdev) int radeon_uvd_suspend(struct radeon_device *rdev) { - unsigned size; - void *ptr; - int i; + int i, r; if (rdev->uvd.vcpu_bo == NULL) return 0; - for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) - if (atomic_read(&rdev->uvd.handles[i])) - break; + for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { + uint32_t handle = atomic_read(&rdev->uvd.handles[i]); + if (handle != 0) { + struct radeon_fence *fence; - if (i == RADEON_MAX_UVD_HANDLES) - return 0; + radeon_uvd_note_usage(rdev); - size = radeon_bo_size(rdev->uvd.vcpu_bo); - size -= rdev->uvd_fw->size; + r = radeon_uvd_get_destroy_msg(rdev, + R600_RING_TYPE_UVD_INDEX, handle, &fence); + if (r) { + DRM_ERROR("Error destroying UVD (%d)!\n", r); + continue; + } - ptr = rdev->uvd.cpu_addr; - ptr += rdev->uvd_fw->size; + radeon_fence_wait(fence, false); + radeon_fence_unref(&fence); - rdev->uvd.saved_bo = kmalloc(size, GFP_KERNEL); - memcpy(rdev->uvd.saved_bo, ptr, size); + rdev->uvd.filp[i] = NULL; + atomic_set(&rdev->uvd.handles[i], 0); + } + } return 0; } @@ -246,12 +250,7 @@ int radeon_uvd_resume(struct radeon_device *rdev) ptr = rdev->uvd.cpu_addr; ptr += rdev->uvd_fw->size; - if (rdev->uvd.saved_bo != NULL) { - memcpy(ptr, rdev->uvd.saved_bo, size); - kfree(rdev->uvd.saved_bo); - rdev->uvd.saved_bo = NULL; - } else - memset(ptr, 0, size); + memset(ptr, 0, size); return 0; } From 454be2af5b49612e7f20ceb6683d5809ce848bee Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Tue, 28 Apr 2015 13:09:32 -0400 Subject: [PATCH 336/652] drivers: CCI: fix used_mask init in validate_group() Currently in validate_group(), there is a static initializer for fake_pmu.used_mask which is based on CPU_BITS_NONE but the used_mask array size is based on CCI_PMU_MAX_HW_EVENTS. CCI_PMU_MAX_HW_EVENTS is not based on NR_CPUS, so CPU_BITS_NONE is not correct and will cause a build failure if NR_CPUS is set high enough to make CPU_BITS_NONE larger than used_mask. Reviewed-by: Mark Rutland Signed-off-by: Mark Salter Signed-off-by: Arnd Bergmann --- drivers/bus/arm-cci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index b854125e4831..5340604b23a4 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -660,7 +660,7 @@ validate_group(struct perf_event *event) * Initialise the fake PMU. We only need to populate the * used_mask for the purposes of validation. */ - .used_mask = CPU_BITS_NONE, + .used_mask = { 0 }, }; if (!validate_event(event->pmu, &fake_pmu, leader)) From d68b35f845cc56472fa0d782449ff1549f00ec47 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 29 Apr 2015 11:57:18 +0200 Subject: [PATCH 337/652] MAINTAINERS: replace an AT91 maintainer As some help is needed from an active maintainer, replace Andrew Victor by Alexandre Belloni in the ARM/Atmel MAINTAINERS' entry (aka AT91). Add an entry to the CREDITS file. Thanks Andrew for the great role you played during the early days of this product family. Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor Acked-by: Alexandre Belloni Signed-off-by: Arnd Bergmann --- CREDITS | 7 +++++++ MAINTAINERS | 3 +-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/CREDITS b/CREDITS index 40cc4bfb34db..ec7e6c7fdd1b 100644 --- a/CREDITS +++ b/CREDITS @@ -3709,6 +3709,13 @@ N: Dirk Verworner D: Co-author of German book ``Linux-Kernel-Programmierung'' D: Co-founder of Berlin Linux User Group +N: Andrew Victor +E: linux@maxim.org.za +W: http://maxim.org.za/at91_26.html +D: First maintainer of Atmel ARM-based SoC, aka AT91 +D: Introduced support for at91rm9200, the first chip of AT91 family +S: South Africa + N: Riku Voipio E: riku.voipio@iki.fi D: Author of PCA9532 LED and Fintek f75375s hwmon driver diff --git a/MAINTAINERS b/MAINTAINERS index f639c04c8098..3ab4597c6a8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -892,11 +892,10 @@ S: Maintained F: arch/arm/mach-alpine/ ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES -M: Andrew Victor M: Nicolas Ferre +M: Alexandre Belloni M: Jean-Christophe Plagniol-Villard L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://maxim.org.za/at91_26.html W: http://www.linux4sam.org S: Supported F: arch/arm/mach-at91/ From dc0e3db4ec7c1e73e3283ad39b68eff32b7dc8a1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 5 May 2015 14:35:49 -0300 Subject: [PATCH 338/652] ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ab86655c1f4b..0ca4a3eaf65d 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MESON=y CONFIG_ARCH_MXC=y +CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SX=y CONFIG_SOC_VF610=y +CONFIG_SOC_LS1021A=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y From b9a5e5e18fbf223502c0b2264c15024e393da928 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 7 May 2015 21:19:39 +0200 Subject: [PATCH 339/652] ACPI / init: Fix the ordering of acpi_reserve_resources() Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by: George McCollister Link: http://marc.info/?t=143092384600002&r=1&w=2 Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/osl.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 39748bb3a543..7ccba395c9dd 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -182,7 +182,7 @@ static void __init acpi_request_region (struct acpi_generic_address *gas, request_mem_region(addr, length, desc); } -static int __init acpi_reserve_resources(void) +static void __init acpi_reserve_resources(void) { acpi_request_region(&acpi_gbl_FADT.xpm1a_event_block, acpi_gbl_FADT.pm1_event_length, "ACPI PM1a_EVT_BLK"); @@ -211,10 +211,7 @@ static int __init acpi_reserve_resources(void) if (!(acpi_gbl_FADT.gpe1_block_length & 0x1)) acpi_request_region(&acpi_gbl_FADT.xgpe1_block, acpi_gbl_FADT.gpe1_block_length, "ACPI GPE1_BLK"); - - return 0; } -device_initcall(acpi_reserve_resources); void acpi_os_printf(const char *fmt, ...) { @@ -1845,6 +1842,7 @@ acpi_status __init acpi_os_initialize(void) acpi_status __init acpi_os_initialize1(void) { + acpi_reserve_resources(); kacpid_wq = alloc_workqueue("kacpid", 0, 1); kacpi_notify_wq = alloc_workqueue("kacpi_notify", 0, 1); kacpi_hotplug_wq = alloc_ordered_workqueue("kacpi_hotplug", 0); From e5f1efb9ae71bbb79629d660dc19b51ce7b95439 Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 2 May 2015 14:31:16 +0200 Subject: [PATCH 340/652] iio: kfifo: Set update_needed to false only if a buffer was allocated Check whether the allocation of a new kfifo buffer failed or not before setting the update_needed flag to false. This will make iio_request_update_kfifo() try to allocate a new buffer the next time a buffer update is requested. Signed-off-by: Gabriele Mazzotta Signed-off-by: Jonathan Cameron --- drivers/iio/kfifo_buf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c index 847ca561afe0..55c267bbfd2f 100644 --- a/drivers/iio/kfifo_buf.c +++ b/drivers/iio/kfifo_buf.c @@ -38,7 +38,8 @@ static int iio_request_update_kfifo(struct iio_buffer *r) kfifo_free(&buf->kf); ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum, buf->buffer.length); - buf->update_needed = false; + if (ret >= 0) + buf->update_needed = false; } else { kfifo_reset_out(&buf->kf); } From bb6ce8b28d97f39c591e94322e3ad28ff22649b2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 11 Apr 2015 00:03:19 +0200 Subject: [PATCH 341/652] staging: sm750: remove incorrect __exit annotation The lynxfb_pci_remove function is used as the 'remove' callback of the driver, and must not be discarded: lynxfb_pci_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o This removes the extraneous annotation. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sm750fb/sm750.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c index 3c7ea95dd9f9..dbbb2f879a29 100644 --- a/drivers/staging/sm750fb/sm750.c +++ b/drivers/staging/sm750fb/sm750.c @@ -1250,7 +1250,7 @@ err_enable: return -ENODEV; } -static void __exit lynxfb_pci_remove(struct pci_dev *pdev) +static void lynxfb_pci_remove(struct pci_dev *pdev) { struct fb_info *info; struct lynx_share *share; From b5eed730bd3f216dd172d2d699686000f8cb9b38 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 8 Apr 2015 14:19:00 +0300 Subject: [PATCH 342/652] staging: rtl8712: freeing an ERR_PTR If memdup_user() fails then "pparmbuf" is an error pointer and we can't pass it to kfree(). I changed the "goto _r871x_mp_ioctl_hdl_exit" to a direct return. I changed the earlier goto to a direct return as well for consistency and removed the "pparmbuf = NULL" initializer since it's no longer needed. Fixes: 45de432775d6 ('Staging: rtl8712: Use memdup_user() instead of copy_from_user()') Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c index 42fba3f5b593..cb0b6387789f 100644 --- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c +++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c @@ -1900,23 +1900,20 @@ static int r871x_mp_ioctl_hdl(struct net_device *dev, struct mp_ioctl_handler *phandler; struct mp_ioctl_param *poidparam; unsigned long BytesRead, BytesWritten, BytesNeeded; - u8 *pparmbuf = NULL, bset; + u8 *pparmbuf, bset; u16 len; uint status; int ret = 0; - if ((!p->length) || (!p->pointer)) { - ret = -EINVAL; - goto _r871x_mp_ioctl_hdl_exit; - } + if ((!p->length) || (!p->pointer)) + return -EINVAL; + bset = (u8)(p->flags & 0xFFFF); len = p->length; - pparmbuf = NULL; pparmbuf = memdup_user(p->pointer, len); - if (IS_ERR(pparmbuf)) { - ret = PTR_ERR(pparmbuf); - goto _r871x_mp_ioctl_hdl_exit; - } + if (IS_ERR(pparmbuf)) + return PTR_ERR(pparmbuf); + poidparam = (struct mp_ioctl_param *)pparmbuf; if (poidparam->subcode >= MAX_MP_IOCTL_SUBCODE) { ret = -EINVAL; From 4b2447248325ac7b1654d362c0e9f050f79e0ffe Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Thu, 30 Apr 2015 22:16:28 +0800 Subject: [PATCH 343/652] mmc: dw_mmc: init desc in dw_mci_idmac_init Set 0 to des1 in 32bit case. Otherwise the random value of des1 will be used in dw_mci_translate_sglist: IDMAC_SET_BUFFER1_SIZE(desc, length) Signed-off-by: Fei Wang Signed-off-by: Zhangfei Gao Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 38b29265cc7c..69952b20563c 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -589,9 +589,11 @@ static int dw_mci_idmac_init(struct dw_mci *host) host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc); /* Forward link the descriptor list */ - for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) + for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) { p->des3 = cpu_to_le32(host->sg_dma + (sizeof(struct idmac_desc) * (i + 1))); + p->des1 = 0; + } /* Set the last descriptor as the end-of-ring descriptor */ p->des3 = cpu_to_le32(host->sg_dma); From 4de3bf66c61ef708d8f22d7f990339668a858e7d Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Tue, 5 May 2015 16:54:49 +0800 Subject: [PATCH 344/652] mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE When non-removable is used for emmc, MMC_CAP_NONREMOVABLE should also be checked, otherwise detection fail since present=0 Signed-off-by: Zhangfei Gao Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 69952b20563c..5f5adafb253a 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1302,7 +1302,8 @@ static int dw_mci_get_cd(struct mmc_host *mmc) int gpio_cd = mmc_gpio_get_cd(mmc); /* Use platform get_cd function, else try onboard card detect */ - if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) + if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) || + (mmc->caps & MMC_CAP_NONREMOVABLE)) present = 1; else if (!IS_ERR_VALUE(gpio_cd)) present = gpio_cd; From b6538fe32966e63ef38897860ef220980d904974 Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Fri, 8 May 2015 18:19:03 +1000 Subject: [PATCH 345/652] md-raid0: conditional mddev->queue access to suit dm-raid This patch is a prerequisite for dm-raid "raid0" support to allow dm-raid to access the MD RAID0 personality doing unconditional accesses to mddev->queue, which is NULL in case of dm-raid stacked on top of MD. Most of the conditional mddev->queue accesses made it to upstream but this missing one, which prohibits md raid0 to set disk stack limits (being done in dm core in case of md underneath dm). Signed-off-by: Heinz Mauelshagen Tested-by: Heinz Mauelshagen Signed-off-by: NeilBrown --- drivers/md/raid0.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 2cb59a641cd2..6a68ef5246d4 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -188,8 +188,9 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) } dev[j] = rdev1; - disk_stack_limits(mddev->gendisk, rdev1->bdev, - rdev1->data_offset << 9); + if (mddev->queue) + disk_stack_limits(mddev->gendisk, rdev1->bdev, + rdev1->data_offset << 9); if (rdev1->bdev->bd_disk->queue->merge_bvec_fn) conf->has_merge_bvec = 1; From f18c1a35f62caccb527e8b0990c8801596e7c662 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:04 +1000 Subject: [PATCH 346/652] md/raid5: new alloc_stripe() to allocate an initialize a stripe. The new batch_lock and batch_list fields are being initialized in grow_one_stripe() but not in resize_stripes(). This causes a crash on resize. So separate the core initialization into a new function and call it from both allocation sites. Signed-off-by: NeilBrown Fixes: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") --- drivers/md/raid5.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 77dfd720aaa0..91a1e8b26b52 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1971,17 +1971,30 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) put_cpu(); } +static struct stripe_head *alloc_stripe(struct kmem_cache *sc, gfp_t gfp) +{ + struct stripe_head *sh; + + sh = kmem_cache_zalloc(sc, gfp); + if (sh) { + spin_lock_init(&sh->stripe_lock); + spin_lock_init(&sh->batch_lock); + INIT_LIST_HEAD(&sh->batch_list); + INIT_LIST_HEAD(&sh->lru); + atomic_set(&sh->count, 1); + } + return sh; +} static int grow_one_stripe(struct r5conf *conf, gfp_t gfp) { struct stripe_head *sh; - sh = kmem_cache_zalloc(conf->slab_cache, gfp); + + sh = alloc_stripe(conf->slab_cache, gfp); if (!sh) return 0; sh->raid_conf = conf; - spin_lock_init(&sh->stripe_lock); - if (grow_buffers(sh, gfp)) { shrink_buffers(sh); kmem_cache_free(conf->slab_cache, sh); @@ -1990,13 +2003,8 @@ static int grow_one_stripe(struct r5conf *conf, gfp_t gfp) sh->hash_lock_index = conf->max_nr_stripes % NR_STRIPE_HASH_LOCKS; /* we just created an active stripe so... */ - atomic_set(&sh->count, 1); atomic_inc(&conf->active_stripes); - INIT_LIST_HEAD(&sh->lru); - spin_lock_init(&sh->batch_lock); - INIT_LIST_HEAD(&sh->batch_list); - sh->batch_head = NULL; release_stripe(sh); conf->max_nr_stripes++; return 1; @@ -2109,13 +2117,11 @@ static int resize_stripes(struct r5conf *conf, int newsize) return -ENOMEM; for (i = conf->max_nr_stripes; i; i--) { - nsh = kmem_cache_zalloc(sc, GFP_KERNEL); + nsh = alloc_stripe(sc, GFP_KERNEL); if (!nsh) break; nsh->raid_conf = conf; - spin_lock_init(&nsh->stripe_lock); - list_add(&nsh->lru, &newstripes); } if (i) { @@ -2142,13 +2148,11 @@ static int resize_stripes(struct r5conf *conf, int newsize) lock_device_hash_lock(conf, hash)); osh = get_free_stripe(conf, hash); unlock_device_hash_lock(conf, hash); - atomic_set(&nsh->count, 1); + for(i=0; ipool_size; i++) { nsh->dev[i].page = osh->dev[i].page; nsh->dev[i].orig_page = osh->dev[i].page; } - for( ; idev[i].page = NULL; nsh->hash_lock_index = hash; kmem_cache_free(conf->slab_cache, osh); cnt++; From b0c783b32318bef29d64086fa812e8c659cb5b37 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:32 +1000 Subject: [PATCH 347/652] md/raid5: more incorrect BUG_ON in handle_stripe_fill. It is not incorrect to call handle_stripe_fill() when a batch of full-stripe writes is active. It is, however, a BUG if fetch_block() then decides it needs to actually fetch anything. So move the 'BUG_ON' to where it belongs. Signed-off-by: NeilBrown Fixes: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 91a1e8b26b52..415cac6d89bd 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3302,6 +3302,7 @@ static int fetch_block(struct stripe_head *sh, struct stripe_head_state *s, */ BUG_ON(test_bit(R5_Wantcompute, &dev->flags)); BUG_ON(test_bit(R5_Wantread, &dev->flags)); + BUG_ON(sh->batch_head); if ((s->uptodate == disks - 1) && (s->failed && (disk_idx == s->failed_num[0] || disk_idx == s->failed_num[1]))) { @@ -3370,7 +3371,6 @@ static void handle_stripe_fill(struct stripe_head *sh, { int i; - BUG_ON(sh->batch_head); /* look for blocks to read/compute, skip this if a compute * is already in flight, or if the stripe contents are in the * midst of changing due to a write From 10d82c5f0d167ef75a2d8d7d4eed9ee43d3369c9 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:33 +1000 Subject: [PATCH 348/652] md/raid5: avoid reading parity blocks for full-stripe write to degraded array When performing a reconstruct write, we need to read all blocks that are not being over-written .. except the parity (P and Q) blocks. The code currently reads these (as they are not being over-written!) unnecessarily. Signed-off-by: NeilBrown Fixes: ea664c8245f3 ("md/raid5: need_this_block: tidy/fix last condition.") --- drivers/md/raid5.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 415cac6d89bd..85dc0e67fb88 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3282,7 +3282,9 @@ static int need_this_block(struct stripe_head *sh, struct stripe_head_state *s, /* reconstruct-write isn't being forced */ return 0; for (i = 0; i < s->failed; i++) { - if (!test_bit(R5_UPTODATE, &fdev[i]->flags) && + if (s->failed_num[i] != sh->pd_idx && + s->failed_num[i] != sh->qd_idx && + !test_bit(R5_UPTODATE, &fdev[i]->flags) && !test_bit(R5_OVERWRITE, &fdev[i]->flags)) return 1; } From 6e9eac2dcee5e19f125967dd2be3e36558c42fff Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:34 +1000 Subject: [PATCH 349/652] md/raid5: don't record new size if resize_stripes fails. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3752f ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Cc: stable@vger.kernel.org (v2.6.17+) Signed-off-by: NeilBrown --- drivers/md/raid5.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 85dc0e67fb88..9748e525e4c0 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2216,7 +2216,8 @@ static int resize_stripes(struct r5conf *conf, int newsize) conf->slab_cache = sc; conf->active_name = 1-conf->active_name; - conf->pool_size = newsize; + if (!err) + conf->pool_size = newsize; return err; } From 738a273806ee0568369c9bb19ef3b102f54beef4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:39 +1000 Subject: [PATCH 350/652] md/raid5: fix allocation of 'scribble' array. As the new 'scribble' array is sized based on chunk size, we need to make sure the size matches the largest of 'old' and 'new' chunk sizes when the array is undergoing reshape. We also potentially need to resize it even when not resizing the stripe cache, as chunk size can change without changing number of devices. So move the 'resize' code into a separate function, and consider old and new sizes when allocating. Signed-off-by: NeilBrown Fixes: 46d5b785621a ("raid5: use flex_array for scribble data") --- drivers/md/raid5.c | 65 ++++++++++++++++++++++++++++++---------------- 1 file changed, 43 insertions(+), 22 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 9748e525e4c0..3873eaa6fa2e 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2068,6 +2068,35 @@ static struct flex_array *scribble_alloc(int num, int cnt, gfp_t flags) return ret; } +static int resize_chunks(struct r5conf *conf, int new_disks, int new_sectors) +{ + unsigned long cpu; + int err = 0; + + mddev_suspend(conf->mddev); + get_online_cpus(); + for_each_present_cpu(cpu) { + struct raid5_percpu *percpu; + struct flex_array *scribble; + + percpu = per_cpu_ptr(conf->percpu, cpu); + scribble = scribble_alloc(new_disks, + new_sectors / STRIPE_SECTORS, + GFP_NOIO); + + if (scribble) { + flex_array_free(percpu->scribble); + percpu->scribble = scribble; + } else { + err = -ENOMEM; + break; + } + } + put_online_cpus(); + mddev_resume(conf->mddev); + return err; +} + static int resize_stripes(struct r5conf *conf, int newsize) { /* Make all the stripes able to hold 'newsize' devices. @@ -2096,7 +2125,6 @@ static int resize_stripes(struct r5conf *conf, int newsize) struct stripe_head *osh, *nsh; LIST_HEAD(newstripes); struct disk_info *ndisks; - unsigned long cpu; int err; struct kmem_cache *sc; int i; @@ -2178,25 +2206,6 @@ static int resize_stripes(struct r5conf *conf, int newsize) } else err = -ENOMEM; - get_online_cpus(); - for_each_present_cpu(cpu) { - struct raid5_percpu *percpu; - struct flex_array *scribble; - - percpu = per_cpu_ptr(conf->percpu, cpu); - scribble = scribble_alloc(newsize, conf->chunk_sectors / - STRIPE_SECTORS, GFP_NOIO); - - if (scribble) { - flex_array_free(percpu->scribble); - percpu->scribble = scribble; - } else { - err = -ENOMEM; - break; - } - } - put_online_cpus(); - /* Step 4, return new stripes to service */ while(!list_empty(&newstripes)) { nsh = list_entry(newstripes.next, struct stripe_head, lru); @@ -6228,8 +6237,11 @@ static int alloc_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu percpu->spare_page = alloc_page(GFP_KERNEL); if (!percpu->scribble) percpu->scribble = scribble_alloc(max(conf->raid_disks, - conf->previous_raid_disks), conf->chunk_sectors / - STRIPE_SECTORS, GFP_KERNEL); + conf->previous_raid_disks), + max(conf->chunk_sectors, + conf->prev_chunk_sectors) + / STRIPE_SECTORS, + GFP_KERNEL); if (!percpu->scribble || (conf->level == 6 && !percpu->spare_page)) { free_scratch_buffer(conf, percpu); @@ -7205,6 +7217,15 @@ static int check_reshape(struct mddev *mddev) if (!check_stripe_cache(mddev)) return -ENOSPC; + if (mddev->new_chunk_sectors > mddev->chunk_sectors || + mddev->delta_disks > 0) + if (resize_chunks(conf, + conf->previous_raid_disks + + max(0, mddev->delta_disks), + max(mddev->new_chunk_sectors, + mddev->chunk_sectors) + ) < 0) + return -ENOMEM; return resize_stripes(conf, (conf->previous_raid_disks + mddev->delta_disks)); } From bb27051f9fd7643f05d8f0babce3337f0b9b3087 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:40 +1000 Subject: [PATCH 351/652] md/raid5: fix handling of degraded stripes in batches. There is no need for special handling of stripe-batches when the array is degraded. There may be if there is a failure in the batch, but STRIPE_DEGRADED does not imply an error. So don't set STRIPE_BATCH_ERR in ops_run_io just because the array is degraded. This actually causes a bug: the STRIPE_DEGRADED flag gets cleared in check_break_stripe_batch_list() and so the bitmap bit gets cleared when it shouldn't. So in check_break_stripe_batch_list(), split the batch up completely - again STRIPE_DEGRADED isn't meaningful. Also don't set STRIPE_BATCH_ERR when there is a write error to a replacement device. This simply removes the replacement device and requires no extra handling. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3873eaa6fa2e..1ba97fdc6df1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1078,9 +1078,6 @@ again: pr_debug("skip op %ld on disc %d for sector %llu\n", bi->bi_rw, i, (unsigned long long)sh->sector); clear_bit(R5_LOCKED, &sh->dev[i].flags); - if (sh->batch_head) - set_bit(STRIPE_BATCH_ERR, - &sh->batch_head->state); set_bit(STRIPE_HANDLE, &sh->state); } @@ -2448,7 +2445,7 @@ static void raid5_end_write_request(struct bio *bi, int error) } rdev_dec_pending(rdev, conf->mddev); - if (sh->batch_head && !uptodate) + if (sh->batch_head && !uptodate && !replacement) set_bit(STRIPE_BATCH_ERR, &sh->batch_head->state); if (!test_and_clear_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags)) @@ -4214,15 +4211,9 @@ static void check_break_stripe_batch_list(struct stripe_head *sh) return; head_sh = sh; - do { - sh = list_first_entry(&sh->batch_list, - struct stripe_head, batch_list); - BUG_ON(sh == head_sh); - } while (!test_bit(STRIPE_DEGRADED, &sh->state)); - while (sh != head_sh) { - next = list_first_entry(&sh->batch_list, - struct stripe_head, batch_list); + list_for_each_entry_safe(sh, next, &head_sh->batch_list, batch_list) { + list_del_init(&sh->batch_list); set_mask_bits(&sh->state, ~STRIPE_EXPAND_SYNC_FLAG, @@ -4242,8 +4233,6 @@ static void check_break_stripe_batch_list(struct stripe_head *sh) set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); - - sh = next; } } From f30bf2a5cac6c60ab366c4bc6db913597bf4d6ab Mon Sep 17 00:00:00 2001 From: Tommi Rantala Date: Thu, 7 May 2015 15:12:21 +0300 Subject: [PATCH 352/652] ipvs: fix memory leak in ip_vs_ctl.c Fix memory leak introduced in commit a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct."): unreferenced object 0xffff88005785b800 (size 2048): comm "(-localed)", pid 1434, jiffies 4294755650 (age 1421.089s) hex dump (first 32 bytes): bb 89 0b 83 ff ff ff ff b0 78 f0 4e 00 88 ff ff .........x.N.... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x4e/0xb0 [] __kmalloc_track_caller+0x244/0x430 [] kmemdup+0x20/0x50 [] ip_vs_control_net_init+0x1f7/0x510 [] __ip_vs_init+0x100/0x250 [] ops_init+0x41/0x190 [] setup_net+0x93/0x150 [] copy_net_ns+0x82/0x140 [] create_new_namespaces+0xfd/0x190 [] unshare_nsproxy_namespaces+0x5a/0xc0 [] SyS_unshare+0x173/0x310 [] system_call_fastpath+0x12/0x6f [] 0xffffffffffffffff Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.") Signed-off-by: Tommi Rantala Acked-by: Julian Anastasov Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_ctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 49532672f66d..285eae3a1454 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3823,6 +3823,9 @@ static void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) cancel_work_sync(&ipvs->defense_work.work); unregister_net_sysctl_table(ipvs->sysctl_hdr); ip_vs_stop_estimator(net, &ipvs->tot_stats); + + if (!net_eq(net, &init_net)) + kfree(ipvs->sysctl_tbl); } #else From 0782e63bc6fe7e2d3408d250df11d388b7799c6b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 5 May 2015 19:49:49 +0200 Subject: [PATCH 353/652] sched: Handle priority boosted tasks proper in setscheduler() Ronny reported that the following scenario is not handled correctly: T1 (prio = 10) lock(rtmutex); T2 (prio = 20) lock(rtmutex) boost T1 T1 (prio = 20) sys_set_scheduler(prio = 30) T1 prio = 30 .... sys_set_scheduler(prio = 10) T1 prio = 30 The last step is wrong as T1 should now be back at prio 20. Commit c365c292d059 ("sched: Consider pi boosting in setscheduler()") only handles the case where a boosted tasks tries to lower its priority. Fix it by taking the new effective priority into account for the decision whether a change of the priority is required. Reported-by: Ronny Meeus Tested-by: Steven Rostedt Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Steven Rostedt Cc: Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Mike Galbraith Fixes: c365c292d059 ("sched: Consider pi boosting in setscheduler()") Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505051806060.4225@nanos Signed-off-by: Ingo Molnar --- include/linux/sched/rt.h | 7 ++++--- kernel/locking/rtmutex.c | 12 +++++++----- kernel/sched/core.c | 26 ++++++++++++++------------ 3 files changed, 25 insertions(+), 20 deletions(-) diff --git a/include/linux/sched/rt.h b/include/linux/sched/rt.h index 6341f5be6e24..a30b172df6e1 100644 --- a/include/linux/sched/rt.h +++ b/include/linux/sched/rt.h @@ -18,7 +18,7 @@ static inline int rt_task(struct task_struct *p) #ifdef CONFIG_RT_MUTEXES extern int rt_mutex_getprio(struct task_struct *p); extern void rt_mutex_setprio(struct task_struct *p, int prio); -extern int rt_mutex_check_prio(struct task_struct *task, int newprio); +extern int rt_mutex_get_effective_prio(struct task_struct *task, int newprio); extern struct task_struct *rt_mutex_get_top_task(struct task_struct *task); extern void rt_mutex_adjust_pi(struct task_struct *p); static inline bool tsk_is_pi_blocked(struct task_struct *tsk) @@ -31,9 +31,10 @@ static inline int rt_mutex_getprio(struct task_struct *p) return p->normal_prio; } -static inline int rt_mutex_check_prio(struct task_struct *task, int newprio) +static inline int rt_mutex_get_effective_prio(struct task_struct *task, + int newprio) { - return 0; + return newprio; } static inline struct task_struct *rt_mutex_get_top_task(struct task_struct *task) diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c index b73279367087..b025295f4966 100644 --- a/kernel/locking/rtmutex.c +++ b/kernel/locking/rtmutex.c @@ -265,15 +265,17 @@ struct task_struct *rt_mutex_get_top_task(struct task_struct *task) } /* - * Called by sched_setscheduler() to check whether the priority change - * is overruled by a possible priority boosting. + * Called by sched_setscheduler() to get the priority which will be + * effective after the change. */ -int rt_mutex_check_prio(struct task_struct *task, int newprio) +int rt_mutex_get_effective_prio(struct task_struct *task, int newprio) { if (!task_has_pi_waiters(task)) - return 0; + return newprio; - return task_top_pi_waiter(task)->task->prio <= newprio; + if (task_top_pi_waiter(task)->task->prio <= newprio) + return task_top_pi_waiter(task)->task->prio; + return newprio; } /* diff --git a/kernel/sched/core.c b/kernel/sched/core.c index fe22f7510bce..34db9bf892a3 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -3300,15 +3300,18 @@ static void __setscheduler_params(struct task_struct *p, /* Actually do priority change: must hold pi & rq lock. */ static void __setscheduler(struct rq *rq, struct task_struct *p, - const struct sched_attr *attr) + const struct sched_attr *attr, bool keep_boost) { __setscheduler_params(p, attr); /* - * If we get here, there was no pi waiters boosting the - * task. It is safe to use the normal prio. + * Keep a potential priority boosting if called from + * sched_setscheduler(). */ - p->prio = normal_prio(p); + if (keep_boost) + p->prio = rt_mutex_get_effective_prio(p, normal_prio(p)); + else + p->prio = normal_prio(p); if (dl_prio(p->prio)) p->sched_class = &dl_sched_class; @@ -3408,7 +3411,7 @@ static int __sched_setscheduler(struct task_struct *p, int newprio = dl_policy(attr->sched_policy) ? MAX_DL_PRIO - 1 : MAX_RT_PRIO - 1 - attr->sched_priority; int retval, oldprio, oldpolicy = -1, queued, running; - int policy = attr->sched_policy; + int new_effective_prio, policy = attr->sched_policy; unsigned long flags; const struct sched_class *prev_class; struct rq *rq; @@ -3590,15 +3593,14 @@ change: oldprio = p->prio; /* - * Special case for priority boosted tasks. - * - * If the new priority is lower or equal (user space view) - * than the current (boosted) priority, we just store the new + * Take priority boosted tasks into account. If the new + * effective priority is unchanged, we just store the new * normal parameters and do not touch the scheduler class and * the runqueue. This will be done when the task deboost * itself. */ - if (rt_mutex_check_prio(p, newprio)) { + new_effective_prio = rt_mutex_get_effective_prio(p, newprio); + if (new_effective_prio == oldprio) { __setscheduler_params(p, attr); task_rq_unlock(rq, p, &flags); return 0; @@ -3612,7 +3614,7 @@ change: put_prev_task(rq, p); prev_class = p->sched_class; - __setscheduler(rq, p, attr); + __setscheduler(rq, p, attr, true); if (running) p->sched_class->set_curr_task(rq); @@ -7346,7 +7348,7 @@ static void normalize_task(struct rq *rq, struct task_struct *p) queued = task_on_rq_queued(p); if (queued) dequeue_task(rq, p, 0); - __setscheduler(rq, p, &attr); + __setscheduler(rq, p, &attr, false); if (queued) { enqueue_task(rq, p, 0); resched_curr(rq); From 533445c6e53368569e50ab3fb712230c03d523f3 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Mon, 4 May 2015 03:09:36 -0700 Subject: [PATCH 354/652] sched/core: Fix regression in cpuset_cpu_inactive() for suspend Commit 3c18d447b3b3 ("sched/core: Check for available DL bandwidth in cpuset_cpu_inactive()"), a SCHED_DEADLINE bugfix, had a logic error that caused a regression in setting a CPU inactive during suspend. I ran into this when a program was failing pthread_setaffinity_np() with EINVAL after a suspend+wake up. A simple reproducer: $ ./a.out sched_setaffinity: Success $ systemctl suspend $ ./a.out sched_setaffinity: Invalid argument ... where ./a.out is: #define _GNU_SOURCE #include #include #include #include #include #include int main(void) { long num_cores; cpu_set_t cpu_set; int ret; num_cores = sysconf(_SC_NPROCESSORS_ONLN); CPU_ZERO(&cpu_set); CPU_SET(num_cores - 1, &cpu_set); errno = 0; ret = sched_setaffinity(getpid(), sizeof(cpu_set), &cpu_set); perror("sched_setaffinity"); return ret ? EXIT_FAILURE : EXIT_SUCCESS; } The mistake is that suspend is handled in the action == CPU_DOWN_PREPARE_FROZEN case of the switch statement in cpuset_cpu_inactive(). However, the commit in question masked out CPU_TASKS_FROZEN from the action, making this case dead. The fix is straightforward. Signed-off-by: Omar Sandoval Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Juri Lelli Cc: Thomas Gleixner Fixes: 3c18d447b3b3 ("sched/core: Check for available DL bandwidth in cpuset_cpu_inactive()") Link: http://lkml.kernel.org/r/1cb5ecb3d6543c38cce5790387f336f54ec8e2bc.1430733960.git.osandov@osandov.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 34db9bf892a3..57bd333bc4ab 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6999,27 +6999,23 @@ static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action, unsigned long flags; long cpu = (long)hcpu; struct dl_bw *dl_b; + bool overflow; + int cpus; - switch (action & ~CPU_TASKS_FROZEN) { + switch (action) { case CPU_DOWN_PREPARE: - /* explicitly allow suspend */ - if (!(action & CPU_TASKS_FROZEN)) { - bool overflow; - int cpus; + rcu_read_lock_sched(); + dl_b = dl_bw_of(cpu); - rcu_read_lock_sched(); - dl_b = dl_bw_of(cpu); + raw_spin_lock_irqsave(&dl_b->lock, flags); + cpus = dl_bw_cpus(cpu); + overflow = __dl_overflow(dl_b, cpus, 0, 0); + raw_spin_unlock_irqrestore(&dl_b->lock, flags); - raw_spin_lock_irqsave(&dl_b->lock, flags); - cpus = dl_bw_cpus(cpu); - overflow = __dl_overflow(dl_b, cpus, 0, 0); - raw_spin_unlock_irqrestore(&dl_b->lock, flags); + rcu_read_unlock_sched(); - rcu_read_unlock_sched(); - - if (overflow) - return notifier_from_errno(-EBUSY); - } + if (overflow) + return notifier_from_errno(-EBUSY); cpuset_update_active_cpus(false); break; case CPU_DOWN_PREPARE_FROZEN: From 8b10c5e2b59ef2a80a07ab594a3b4987a4676211 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 1 May 2015 16:08:46 +0200 Subject: [PATCH 355/652] perf: Annotate inherited event ctx->mutex recursion While fuzzing Sasha tripped over another ctx->mutex recursion lockdep splat. Annotate this. Reported-by: Sasha Levin Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Linus Torvalds Cc: Thomas Gleixner Cc: Vince Weaver Signed-off-by: Ingo Molnar --- kernel/events/core.c | 41 +++++++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 8 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 81aa3a4ece9f..1a3bf48743ce 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -913,10 +913,30 @@ static void put_ctx(struct perf_event_context *ctx) * Those places that change perf_event::ctx will hold both * perf_event_ctx::mutex of the 'old' and 'new' ctx value. * - * Lock ordering is by mutex address. There is one other site where - * perf_event_context::mutex nests and that is put_event(). But remember that - * that is a parent<->child context relation, and migration does not affect - * children, therefore these two orderings should not interact. + * Lock ordering is by mutex address. There are two other sites where + * perf_event_context::mutex nests and those are: + * + * - perf_event_exit_task_context() [ child , 0 ] + * __perf_event_exit_task() + * sync_child_event() + * put_event() [ parent, 1 ] + * + * - perf_event_init_context() [ parent, 0 ] + * inherit_task_group() + * inherit_group() + * inherit_event() + * perf_event_alloc() + * perf_init_event() + * perf_try_init_event() [ child , 1 ] + * + * While it appears there is an obvious deadlock here -- the parent and child + * nesting levels are inverted between the two. This is in fact safe because + * life-time rules separate them. That is an exiting task cannot fork, and a + * spawning task cannot (yet) exit. + * + * But remember that that these are parent<->child context relations, and + * migration does not affect children, therefore these two orderings should not + * interact. * * The change in perf_event::ctx does not affect children (as claimed above) * because the sys_perf_event_open() case will install a new event and break @@ -3657,9 +3677,6 @@ static void perf_remove_from_owner(struct perf_event *event) } } -/* - * Called when the last reference to the file is gone. - */ static void put_event(struct perf_event *event) { struct perf_event_context *ctx; @@ -3697,6 +3714,9 @@ int perf_event_release_kernel(struct perf_event *event) } EXPORT_SYMBOL_GPL(perf_event_release_kernel); +/* + * Called when the last reference to the file is gone. + */ static int perf_release(struct inode *inode, struct file *file) { put_event(file->private_data); @@ -7364,7 +7384,12 @@ static int perf_try_init_event(struct pmu *pmu, struct perf_event *event) return -ENODEV; if (event->group_leader != event) { - ctx = perf_event_ctx_lock(event->group_leader); + /* + * This ctx->mutex can nest when we're called through + * inheritance. See the perf_event_ctx_lock_nested() comment. + */ + ctx = perf_event_ctx_lock_nested(event->group_leader, + SINGLE_DEPTH_NESTING); BUG_ON(!ctx); } From 6d374056354a742eed4d0050498101e56e794c4b Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Tue, 21 Apr 2015 05:34:41 -0400 Subject: [PATCH 356/652] perf/x86/intel: Fix SLM cache event list iTLB-load-misses and LLC-load-misses count incorrectly on SLM. There is no ITLB.MISSES support on SLM. Event PAGE_WALKS.I_SIDE_WALK should be used to count iTLB-load-misses. This event counts when an instruction (I) page walk is completed or started. Since a page walk implies a TLB miss, the number of TLB misses can be counted by counting the number of pagewalks. DMND_DATA_RD counts both demand and DCU prefetch data reads. However, LLC-load-misses should only count demand reads. There is no way to not include prefetches with a single counter on SLM. So the LLC-load-misses support should be removed on SLM. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1429608881-5055-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 960e85de13fb..3998131d1a68 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1134,7 +1134,7 @@ static __initconst const u64 slm_hw_cache_extra_regs [ C(LL ) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = SLM_DMND_READ|SLM_LLC_ACCESS, - [ C(RESULT_MISS) ] = SLM_DMND_READ|SLM_LLC_MISS, + [ C(RESULT_MISS) ] = 0, }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = SLM_DMND_WRITE|SLM_LLC_ACCESS, @@ -1184,8 +1184,7 @@ static __initconst const u64 slm_hw_cache_event_ids [ C(OP_READ) ] = { /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01b7, + [ C(RESULT_MISS) ] = 0, }, [ C(OP_WRITE) ] = { /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */ @@ -1217,7 +1216,7 @@ static __initconst const u64 slm_hw_cache_event_ids [ C(ITLB) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P */ - [ C(RESULT_MISS) ] = 0x0282, /* ITLB.MISSES */ + [ C(RESULT_MISS) ] = 0x40205, /* PAGE_WALKS.I_SIDE_WALKS */ }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = -1, From 3790e395b8f4b66fe4e53629f304505c110a2be7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 4 May 2015 06:29:44 +0200 Subject: [PATCH 357/652] drm/tegra: Don't use vblank_disable_immediate on incapable driver. Tegra would not only need a hardware vblank counter that increments at leading edge of vblank, but also support for instantaneous high precision vblank timestamp queries, ie. a proper implementation of dev->driver->get_vblank_timestamp(). Without these, there can be off-by-one errors during vblank disable/enable if the scanout is inside vblank at en/disable time, and additionally clients will never see any useable vblank timestamps when querying via drmWaitVblank ioctl. This would negatively affect swap scheduling under X11 and Wayland. Signed-off-by: Mario Kleiner Acked-by: Thierry Reding Signed-off-by: Dave Airlie --- drivers/gpu/drm/tegra/drm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 1833abd7d3aa..bfad15a913a0 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -173,7 +173,6 @@ static int tegra_drm_load(struct drm_device *drm, unsigned long flags) drm->irq_enabled = true; /* syncpoints are used for full 32-bit hardware VBLANK counters */ - drm->vblank_disable_immediate = true; drm->max_vblank_count = 0xffffffff; err = drm_vblank_init(drm, drm->mode_config.num_crtc); From 66c53aaa9c82766d4e9253748c6988441d8c2dc1 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 7 May 2015 14:19:21 -0400 Subject: [PATCH 358/652] earlycon: Revert log warnings Log warnings meant to help diagnose problems setting up earlycon are reporting false positives for 'console='. Revert to the previous behavior which reported nothing. Cc: Maciej W. Rozycki Cc: Robert Schwebel Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/earlycon.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 5fdc9f3ecd64..6dc471e30e79 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -187,13 +187,8 @@ static int __init param_setup_earlycon(char *buf) return 0; err = setup_earlycon(buf); - if (err == -ENOENT) { - pr_warn("no match for %s\n", buf); - err = 0; - } else if (err == -EALREADY) { - pr_warn("already registered\n"); - err = 0; - } + if (err == -ENOENT || err == -EALREADY) + return 0; return err; } early_param("earlycon", param_setup_earlycon); From 66cf1d8473780fcb1a90e86fd19ba276520deb14 Mon Sep 17 00:00:00 2001 From: Semen Protsenko Date: Thu, 30 Apr 2015 18:35:27 +0300 Subject: [PATCH 359/652] serial: omap: Fix error handling in probe There is pm_qos_add_request() being executed on serial_omap_probe(), which stores "&up->pm_qos_request" from omap-serial driver to "pm_qos_array[PM_QOS_CPU_DMA_LATENCY]->constraints". If serial_omap_probe() fails after pm_qos_add_request() (e.g. on uart_add_one_port() call), pm_qos_array still keeping pm_qos_request struct from omap-serial driver, which is not valid anymore (since driver failed). This leads further to kernel crash on pm_qos_update_target(), executing from some completely different driver. We were observing this while trying to run audio playback while having one of omap-serial driver instances failed on uart_add_one_port() call: Unable to handle kernel paging request at virtual address fffffffc Backtrace: (plist_add) from (pm_qos_update_target) (pm_qos_update_target) from (pm_qos_add_request) (pm_qos_add_request) from (snd_pcm_hw_params) (snd_pcm_hw_params) from (snd_pcm_common_ioctl1) (snd_pcm_common_ioctl1) from (snd_pcm_playback_ioctl1) (snd_pcm_playback_ioctl1) from (snd_pcm_playback_ioctl) (snd_pcm_playback_ioctl) from (do_vfs_ioctl) (do_vfs_ioctl) from (SyS_ioctl) (SyS_ioctl) from (ret_fast_syscall) This patch adds pm_qos_remove_request() on fail path in serial_omap_probe() in order to fix this issue. While at it, free the wakeup settings on fail path as well, just like it's done in serial_omap_remove(). Signed-off-by: Semen Protsenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 211479aa34bb..7f49172ccd86 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1735,6 +1735,8 @@ static int serial_omap_probe(struct platform_device *pdev) err_add_port: pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); + pm_qos_remove_request(&up->pm_qos_request); + device_init_wakeup(up->dev, false); err_rs485: err_port_line: return ret; From b23f14302e86628625ac3982a6d23e35888755f2 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sat, 4 Apr 2015 20:49:10 +0100 Subject: [PATCH 360/652] staging: vt6656: use ieee80211_tx_info to select packet type. Information for packet type is in ieee80211_tx_info band IEEE80211_BAND_5GHZ for PK_TYPE_11A. IEEE80211_TX_RC_USE_CTS_PROTECT via tx_rate flags selects PK_TYPE_11GB This ensures that the packet is always the right type. Signed-off-by: Malcolm Priestley Cc: # v3.17+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/rxtx.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c index f6c2cf8590c4..5c589962a1e8 100644 --- a/drivers/staging/vt6656/rxtx.c +++ b/drivers/staging/vt6656/rxtx.c @@ -805,10 +805,18 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb) vnt_schedule_command(priv, WLAN_CMD_SETPOWER); } - if (current_rate > RATE_11M) - pkt_type = priv->packet_type; - else + if (current_rate > RATE_11M) { + if (info->band == IEEE80211_BAND_5GHZ) { + pkt_type = PK_TYPE_11A; + } else { + if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) + pkt_type = PK_TYPE_11GB; + else + pkt_type = PK_TYPE_11GA; + } + } else { pkt_type = PK_TYPE_11B; + } spin_lock_irqsave(&priv->lock, flags); From 3fa0917beb29d886550fcf61a6378563d1ce9684 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 9 Apr 2015 20:53:43 +0100 Subject: [PATCH 361/652] staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe TD_FLAGS_NETIF_SKB is only for data. Fixes issue of ack frames not being reported. Signed-off-by: Malcolm Priestley Cc: # v3.19+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 4bb4f8ee4132..7cd548428a8f 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -989,10 +989,8 @@ static void device_free_tx_buf(struct vnt_private *pDevice, PSTxDesc pDesc) skb->len, DMA_TO_DEVICE); } - if (pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) + if (skb) ieee80211_tx_status_irqsafe(pDevice->hw, skb); - else - dev_kfree_skb_irq(skb); pTDInfo->skb_dma = 0; pTDInfo->skb = NULL; From 6e44dc4be009eef60a1744e4a4b830131f6b9a8e Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 9 Apr 2015 20:53:44 +0100 Subject: [PATCH 362/652] staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED Make use of this macro for non ack frames. Signed-off-by: Malcolm Priestley Cc: # v4.0 Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 7cd548428a8f..6d3df9514088 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -912,7 +912,11 @@ static int vnt_int_report_rate(struct vnt_private *priv, if (!(tsr1 & TSR1_TERR)) { info->status.rates[0].idx = idx; - info->flags |= IEEE80211_TX_STAT_ACK; + + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED; + else + info->flags |= IEEE80211_TX_STAT_ACK; } return 0; From ad3fee9b17b90b8f1ac94b615111b2f14dd90adb Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sat, 11 Apr 2015 20:29:41 +0100 Subject: [PATCH 363/652] staging: vt6655: Fix 80211 control and management status reporting. Currently only TD_FLAGS_NETIF_SKB are reported back to mac80211. Move vnt_int_report_rate to report all frame types. Signed-off-by: Malcolm Priestley Cc: # v3.19+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 6d3df9514088..c81776363d8e 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -941,9 +941,6 @@ static int device_tx_srv(struct vnt_private *pDevice, unsigned int uIdx) /* Only the status of first TD in the chain is correct */ if (pTD->m_td1TD1.byTCR & TCR_STP) { if ((pTD->pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) != 0) { - - vnt_int_report_rate(pDevice, pTD->pTDInfo, byTsr0, byTsr1); - if (!(byTsr1 & TSR1_TERR)) { if (byTsr0 != 0) { pr_debug(" Tx[%d] OK but has error. tsr1[%02X] tsr0[%02X]\n", @@ -962,6 +959,9 @@ static int device_tx_srv(struct vnt_private *pDevice, unsigned int uIdx) (int)uIdx, byTsr1, byTsr0); } } + + vnt_int_report_rate(pDevice, pTD->pTDInfo, byTsr0, byTsr1); + device_free_tx_buf(pDevice, pTD); pDevice->iTDUsed[uIdx]--; } From d65d2b25d2761153390df8026cca1a528d9b6c5a Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Tue, 21 Apr 2015 22:33:00 +0100 Subject: [PATCH 364/652] staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC The state of m_td0TD0.f1Owner should change after the buff_addr has been filled otherwise the device grabs the buffer too early. m_td0TD0.f1Owner is protected by memory barriers on both sides of change. iTDUsed is best incremented after MACvTransmit. It appears that f1Owner actually polls to do the memory transfer. A back port patch will be needed for v3.19 Signed-off-by: Malcolm Priestley Cc: # v4.0+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index c81776363d8e..930bbbebc102 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1206,14 +1206,6 @@ static int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb) if (dma_idx == TYPE_AC0DMA) head_td->pTDInfo->byFlags = TD_FLAGS_NETIF_SKB; - priv->iTDUsed[dma_idx]++; - - /* Take ownership */ - wmb(); - head_td->m_td0TD0.f1Owner = OWNED_BY_NIC; - - /* get Next */ - wmb(); priv->apCurrTD[dma_idx] = head_td->next; spin_unlock_irqrestore(&priv->lock, flags); @@ -1234,11 +1226,18 @@ static int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb) head_td->buff_addr = cpu_to_le32(head_td->pTDInfo->skb_dma); + /* Poll Transmit the adapter */ + wmb(); + head_td->m_td0TD0.f1Owner = OWNED_BY_NIC; + wmb(); /* second memory barrier */ + if (head_td->pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) MACvTransmitAC0(priv->PortOffset); else MACvTransmit0(priv->PortOffset); + priv->iTDUsed[dma_idx]++; + spin_unlock_irqrestore(&priv->lock, flags); return 0; From 032ed34a84263cdb396e4318fed6a92ed50add26 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Tue, 21 Apr 2015 22:33:01 +0100 Subject: [PATCH 365/652] staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value. The TSF counter is not set correctly. Use sync_tsf for last beacon value and get tsf local value. Remove qwLocalTSF variable and call CARDbGetCurrentTSF. Signed-off-by: Malcolm Priestley Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/card.c | 10 +++++++--- drivers/staging/vt6655/card.h | 2 +- drivers/staging/vt6655/device_main.c | 2 +- 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/staging/vt6655/card.c b/drivers/staging/vt6655/card.c index 1cdcf49b2445..e00c0605d154 100644 --- a/drivers/staging/vt6655/card.c +++ b/drivers/staging/vt6655/card.c @@ -362,12 +362,16 @@ bool CARDbSetPhyParameter(struct vnt_private *pDevice, u8 bb_type) * Return Value: none */ bool CARDbUpdateTSF(struct vnt_private *pDevice, unsigned char byRxRate, - u64 qwBSSTimestamp, u64 qwLocalTSF) + u64 qwBSSTimestamp) { + u64 local_tsf; u64 qwTSFOffset = 0; - if (qwBSSTimestamp != qwLocalTSF) { - qwTSFOffset = CARDqGetTSFOffset(byRxRate, qwBSSTimestamp, qwLocalTSF); + CARDbGetCurrentTSF(pDevice, &local_tsf); + + if (qwBSSTimestamp != local_tsf) { + qwTSFOffset = CARDqGetTSFOffset(byRxRate, qwBSSTimestamp, + local_tsf); /* adjust TSF, HW's TSF add TSF Offset reg */ VNSvOutPortD(pDevice->PortOffset + MAC_REG_TSFOFST, (u32)qwTSFOffset); VNSvOutPortD(pDevice->PortOffset + MAC_REG_TSFOFST + 4, (u32)(qwTSFOffset >> 32)); diff --git a/drivers/staging/vt6655/card.h b/drivers/staging/vt6655/card.h index 2dfc41952271..16cca49e680a 100644 --- a/drivers/staging/vt6655/card.h +++ b/drivers/staging/vt6655/card.h @@ -83,7 +83,7 @@ bool CARDbRadioPowerOff(struct vnt_private *); bool CARDbRadioPowerOn(struct vnt_private *); bool CARDbSetPhyParameter(struct vnt_private *, u8); bool CARDbUpdateTSF(struct vnt_private *, unsigned char byRxRate, - u64 qwBSSTimestamp, u64 qwLocalTSF); + u64 qwBSSTimestamp); bool CARDbSetBeaconPeriod(struct vnt_private *, unsigned short wBeaconInterval); #endif /* __CARD_H__ */ diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 930bbbebc102..b3860477eceb 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1478,7 +1478,7 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_ASSOC && priv->op_mode != NL80211_IFTYPE_AP) { if (conf->assoc) { CARDbUpdateTSF(priv, conf->beacon_rate->hw_value, - conf->sync_device_ts, conf->sync_tsf); + conf->sync_tsf); CARDbSetBeaconPeriod(priv, conf->beacon_int); From 664a5c1d1e33cd89cb7883e8c74638cc482b5da7 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Tue, 21 Apr 2015 22:33:02 +0100 Subject: [PATCH 366/652] staging: vt6655: lock MACvWriteBSSIDAddress. This function selects page 1 and cause intermittent problems on interrupt handler. lock call with spin_lock_irqsave. Signed-off-by: Malcolm Priestley Cc: # v3.19+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/device_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index b3860477eceb..0343ae386f03 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1417,9 +1417,16 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw, priv->current_aid = conf->aid; - if (changed & BSS_CHANGED_BSSID) + if (changed & BSS_CHANGED_BSSID) { + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + MACvWriteBSSIDAddress(priv->PortOffset, (u8 *)conf->bssid); + spin_unlock_irqrestore(&priv->lock, flags); + } + if (changed & BSS_CHANGED_BASIC_RATES) { priv->basic_rates = conf->basic_rates; From 13415a998adb1802b5bd6bd5a336331589e866a1 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:17 -0300 Subject: [PATCH 367/652] iio: adc: cc10001: Fix the channel number mapping When some of the ADC channels are reserved for remote CPUs, the scan index and the corresponding channel number doesn't match. This leads to convesion on the incorrect channel during triggered capture. Fix this by using a scan index to channel mapping encoded in the iio_chan_spec for this purpose while starting conversion on a particular ADC channel in trigger handler. Also, the channel_map is not really used anywhere but in probe(), so no need to keep track of it. Remove it from device structure. While here, add 1 to number of channels to register timestamp channel with the IIO core. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index 51e2a83c9404..357e6c213784 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -62,7 +62,6 @@ struct cc10001_adc_device { u16 *buf; struct mutex lock; - unsigned long channel_map; unsigned int start_delay_ns; unsigned int eoc_delay_ns; }; @@ -129,6 +128,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) struct iio_dev *indio_dev; unsigned int delay_ns; unsigned int channel; + unsigned int scan_idx; bool sample_invalid; u16 *data; int i; @@ -150,9 +150,10 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) i = 0; sample_invalid = false; - for_each_set_bit(channel, indio_dev->active_scan_mask, + for_each_set_bit(scan_idx, indio_dev->active_scan_mask, indio_dev->masklength) { + channel = indio_dev->channels[scan_idx].channel; cc10001_adc_start(adc_dev, channel); data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns); @@ -255,22 +256,22 @@ static const struct iio_info cc10001_adc_info = { .update_scan_mode = &cc10001_update_scan_mode, }; -static int cc10001_adc_channel_init(struct iio_dev *indio_dev) +static int cc10001_adc_channel_init(struct iio_dev *indio_dev, + unsigned long channel_map) { - struct cc10001_adc_device *adc_dev = iio_priv(indio_dev); struct iio_chan_spec *chan_array, *timestamp; unsigned int bit, idx = 0; - indio_dev->num_channels = bitmap_weight(&adc_dev->channel_map, - CC10001_ADC_NUM_CHANNELS); + indio_dev->num_channels = bitmap_weight(&channel_map, + CC10001_ADC_NUM_CHANNELS) + 1; - chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels + 1, + chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels, sizeof(struct iio_chan_spec), GFP_KERNEL); if (!chan_array) return -ENOMEM; - for_each_set_bit(bit, &adc_dev->channel_map, CC10001_ADC_NUM_CHANNELS) { + for_each_set_bit(bit, &channel_map, CC10001_ADC_NUM_CHANNELS) { struct iio_chan_spec *chan = &chan_array[idx]; chan->type = IIO_VOLTAGE; @@ -305,6 +306,7 @@ static int cc10001_adc_probe(struct platform_device *pdev) unsigned long adc_clk_rate; struct resource *res; struct iio_dev *indio_dev; + unsigned long channel_map; int ret; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev)); @@ -313,9 +315,9 @@ static int cc10001_adc_probe(struct platform_device *pdev) adc_dev = iio_priv(indio_dev); - adc_dev->channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0); + channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0); if (!of_property_read_u32(node, "adc-reserved-channels", &ret)) - adc_dev->channel_map &= ~ret; + channel_map &= ~ret; adc_dev->reg = devm_regulator_get(&pdev->dev, "vref"); if (IS_ERR(adc_dev->reg)) @@ -361,7 +363,7 @@ static int cc10001_adc_probe(struct platform_device *pdev) adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES; /* Setup the ADC channels available on the device */ - ret = cc10001_adc_channel_init(indio_dev); + ret = cc10001_adc_channel_init(indio_dev, channel_map); if (ret < 0) goto err_disable_clk; From 1e4df6b7208140f3c49f316d33a409d3a161f350 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Fri, 8 May 2015 06:39:51 +0100 Subject: [PATCH 368/652] arm64: bpf: fix signedness bug in loading 64-bit immediate Consider "(u64)insn1.imm << 32 | imm" in the arm64 JIT. Since imm is signed 32-bit, it is sign-extended to 64-bit, losing the high 32 bits. The fix is to convert imm to u32 first, which will be zero-extended to u64 implicitly. Cc: Zi Shen Lim Cc: Alexei Starovoitov Cc: Catalin Marinas Cc: Fixes: 30d3d94cc3d5 ("arm64: bpf: add 'load 64-bit immediate' instruction") Signed-off-by: Xi Wang [will: removed non-arm64 bits and redundant casting] Signed-off-by: Will Deacon --- arch/arm64/net/bpf_jit_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index edba042b2325..dc6a4842683a 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -487,7 +487,7 @@ emit_cond_jmp: return -EINVAL; } - imm64 = (u64)insn1.imm << 32 | imm; + imm64 = (u64)insn1.imm << 32 | (u32)imm; emit_a64_mov_i64(dst, imm64, ctx); return 1; From efadb751692f3c10e72cf96c8409e40e60852ff2 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 20 Apr 2015 14:13:12 -0500 Subject: [PATCH 369/652] MAINTAINERS: socfpga: update the git repo for SoCFPGA The git tree at rocketboards.org is going away. Update the entry to reflect the address of the new location. Also add an entry for all the socfpga_* dts files. Signed-off-by: Dinh Nguyen Signed-off-by: Arnd Bergmann --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3ab4597c6a8b..948b49379909 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1438,9 +1438,10 @@ ARM/SOCFPGA ARCHITECTURE M: Dinh Nguyen S: Maintained F: arch/arm/mach-socfpga/ +F: arch/arm/boot/dts/socfpga* +F: arch/arm/configs/socfpga_defconfig W: http://www.rocketboards.org -T: git://git.rocketboards.org/linux-socfpga.git -T: git://git.rocketboards.org/linux-socfpga-next.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT M: Dinh Nguyen From c9d862c48c48883a4327ae82f4a6de1eef928d60 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 28 Apr 2015 13:59:43 +0300 Subject: [PATCH 370/652] MAINTAINERS: add Conexant Digicolor machines entry This adds Baruch as the maintainer for the Digicolor platform. Signed-off-by: Baruch Siach Signed-off-by: Arnd Bergmann --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 948b49379909..9d39c3824be2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -989,6 +989,12 @@ F: drivers/clocksource/timer-prima2.c F: drivers/clocksource/timer-atlas7.c N: [^a-z]sirf +ARM/CONEXANT DIGICOLOR MACHINE SUPPORT +M: Baruch Siach +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +N: digicolor + ARM/EBSA110 MACHINE SUPPORT M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) From 0d747762966e47e3660cbd1b7806791c83e04f91 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Sat, 9 May 2015 02:33:42 +0900 Subject: [PATCH 371/652] ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420 Commit ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") added a device node for the Exynos5420 DISP1 power domain but dit not make the DP controller a consumer of that power domain. This causes an "Unhandled fault: imprecise external abort" error if the exynos-dp driver tries to access the DP controller registers and the PD was turned off. This lead to a kernel panic and a complete system hang. Make the DP controller device node a consumer of the DISP1 power domain to ensure that the PD is turned on when the exynos-dp driver is probed. Fixes: ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index f67b23f303c3..45317538bbae 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -536,6 +536,7 @@ clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; + power-domains = <&disp_pd>; }; mipi_phy: video-phy@10040714 { From ee2020a4ca847e2cde4d5ee73572388061730809 Mon Sep 17 00:00:00 2001 From: Markus Reichl Date: Sat, 9 May 2015 03:05:51 +0900 Subject: [PATCH 372/652] ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards The Exynos4412 SoC has a s3c6410 RTC where the source clock is now a mandatory property. This patch fixes probe failure of s3c-rtc on Odroid-X2/U2/U3 boards. Signed-off-by: Markus Reichl Tested-by: Tobias Jakobi Reviewed-by: Chanwoo Choi Reviewed-by: Javier Martinez Canillas Tested-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 8de12af7c276..d6b49e5b32e9 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -9,6 +9,7 @@ #include #include +#include #include "exynos4412.dtsi" / { @@ -105,6 +106,8 @@ rtc@10070000 { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; g2d@10800000 { From cb0f7c8b40c52124fdb73b5e5a1b28202efbb43b Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 9 May 2015 03:11:21 +0900 Subject: [PATCH 373/652] ARM: dts: Fix typo in trip point temperature for exynos5420/5440 Remove the extra zero in the "cpu-crit-0" trip point for exynos5420 and exynos5440. Signed-off-by: Abhilash Kesavan Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-trip-points.dtsi | 2 +- arch/arm/boot/dts/exynos5440-trip-points.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi index 5d31fc140823..2180a0152c9b 100644 --- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -28,7 +28,7 @@ trips { type = "active"; }; cpu-crit-0 { - temperature = <1200000>; /* millicelsius */ + temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; }; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi index 48adfa8f4300..356e963edf11 100644 --- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -18,7 +18,7 @@ trips { type = "active"; }; cpu-crit-0 { - temperature = <1050000>; /* millicelsius */ + temperature = <105000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; }; From 8cf5e6dc8dd55d0f1ad46ab4046c3a8a51d2136d Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Sat, 9 May 2015 03:15:16 +0900 Subject: [PATCH 374/652] ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow The Marvell mwifiex driver prevents the system to enter into a suspend state if the card power is not preserved during a suspend/resume cycle. So Suspend-to-RAM and Suspend-to-idle are failing on Exynos5250 Snow. Add the keep-power-in-suspend Power Management property to the SDIO/MMC node so the mwifiex suspend handler doesn't fail and the system is able to enter into a suspend state. Signed-off-by: Javier Martinez Canillas Reviewed-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 2657e842e5a5..1eca97ee4bd6 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -567,6 +567,7 @@ num-slots = <1>; broken-cd; cap-sdio-irq; + keep-power-in-suspend; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; From f94029d8801d7c27a94a3ea6c4967aa33c49c34b Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 4 May 2015 23:04:14 +0200 Subject: [PATCH 375/652] clk: si5351: Mention clock-names in the binding documentation Since the introduction of clk-si5351 the way we should deal with DT provided clocks has changed from indexed to named clock phandles. Amend the binding documentation to reflect named clock phandles by clock-names property. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Michael Turquette --- Documentation/devicetree/bindings/clock/silabs,si5351.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index c40711e8e8f7..28b28309f535 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -17,7 +17,8 @@ Required properties: - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, shall be xtal reference clock or xtal and clkin for - si5351c only. + si5351c only. Corresponding clock input names are "xtal" and + "clkin" respectively. - #address-cells: shall be set to 1. - #size-cells: shall be set to 0. @@ -71,6 +72,7 @@ i2c-master-node { /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; From 0cd3be6e9a46f84ef7a42e1a5645d32ad547b12e Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 4 May 2015 23:04:16 +0200 Subject: [PATCH 376/652] clk: si5351: Do not pass struct clk in platform_data When registering clk-si5351 by platform_data, we should not pass struct clk for the reference clocks. Drop struct clk from platform_data and rework the driver to use devm_clk_get of named clock references. While at it, check for at least one valid input clock and properly prepare/ enable valid reference clocks. Signed-off-by: Sebastian Hesselbarth Reported-by: Michael Welling Reported-by: Jean-Francois Moine Reported-by: Russell King Tested-by: Michael Welling Tested-by: Jean-Francois Moine Signed-off-by: Michael Turquette --- drivers/clk/clk-si5351.c | 63 ++++++++++++++++++++-------- include/linux/platform_data/si5351.h | 4 -- 2 files changed, 45 insertions(+), 22 deletions(-) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 44ea107cfc67..30335d3b99af 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -1128,13 +1128,6 @@ static int si5351_dt_parse(struct i2c_client *client, if (!pdata) return -ENOMEM; - pdata->clk_xtal = of_clk_get(np, 0); - if (!IS_ERR(pdata->clk_xtal)) - clk_put(pdata->clk_xtal); - pdata->clk_clkin = of_clk_get(np, 1); - if (!IS_ERR(pdata->clk_clkin)) - clk_put(pdata->clk_clkin); - /* * property silabs,pll-source : , [<..>] * allow to selectively set pll source @@ -1328,8 +1321,22 @@ static int si5351_i2c_probe(struct i2c_client *client, i2c_set_clientdata(client, drvdata); drvdata->client = client; drvdata->variant = variant; - drvdata->pxtal = pdata->clk_xtal; - drvdata->pclkin = pdata->clk_clkin; + drvdata->pxtal = devm_clk_get(&client->dev, "xtal"); + drvdata->pclkin = devm_clk_get(&client->dev, "clkin"); + + if (PTR_ERR(drvdata->pxtal) == -EPROBE_DEFER || + PTR_ERR(drvdata->pclkin) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + /* + * Check for valid parent clock: VARIANT_A and VARIANT_B need XTAL, + * VARIANT_C can have CLKIN instead. + */ + if (IS_ERR(drvdata->pxtal) && + (drvdata->variant != SI5351_VARIANT_C || IS_ERR(drvdata->pclkin))) { + dev_err(&client->dev, "missing parent clock\n"); + return -EINVAL; + } drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config); if (IS_ERR(drvdata->regmap)) { @@ -1393,6 +1400,11 @@ static int si5351_i2c_probe(struct i2c_client *client, } } + if (!IS_ERR(drvdata->pxtal)) + clk_prepare_enable(drvdata->pxtal); + if (!IS_ERR(drvdata->pclkin)) + clk_prepare_enable(drvdata->pclkin); + /* register xtal input clock gate */ memset(&init, 0, sizeof(init)); init.name = si5351_input_names[0]; @@ -1407,7 +1419,8 @@ static int si5351_i2c_probe(struct i2c_client *client, clk = devm_clk_register(&client->dev, &drvdata->xtal); if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return PTR_ERR(clk); + ret = PTR_ERR(clk); + goto err_clk; } /* register clkin input clock gate */ @@ -1425,7 +1438,8 @@ static int si5351_i2c_probe(struct i2c_client *client, if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return PTR_ERR(clk); + ret = PTR_ERR(clk); + goto err_clk; } } @@ -1447,7 +1461,8 @@ static int si5351_i2c_probe(struct i2c_client *client, clk = devm_clk_register(&client->dev, &drvdata->pll[0].hw); if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } /* register PLLB or VXCO (Si5351B) */ @@ -1471,7 +1486,8 @@ static int si5351_i2c_probe(struct i2c_client *client, clk = devm_clk_register(&client->dev, &drvdata->pll[1].hw); if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } /* register clk multisync and clk out divider */ @@ -1492,8 +1508,10 @@ static int si5351_i2c_probe(struct i2c_client *client, num_clocks * sizeof(*drvdata->onecell.clks), GFP_KERNEL); if (WARN_ON(!drvdata->msynth || !drvdata->clkout || - !drvdata->onecell.clks)) - return -ENOMEM; + !drvdata->onecell.clks)) { + ret = -ENOMEM; + goto err_clk; + } for (n = 0; n < num_clocks; n++) { drvdata->msynth[n].num = n; @@ -1511,7 +1529,8 @@ static int si5351_i2c_probe(struct i2c_client *client, if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } } @@ -1538,7 +1557,8 @@ static int si5351_i2c_probe(struct i2c_client *client, if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } drvdata->onecell.clks[n] = clk; @@ -1557,10 +1577,17 @@ static int si5351_i2c_probe(struct i2c_client *client, &drvdata->onecell); if (ret) { dev_err(&client->dev, "unable to add clk provider\n"); - return ret; + goto err_clk; } return 0; + +err_clk: + if (!IS_ERR(drvdata->pxtal)) + clk_disable_unprepare(drvdata->pxtal); + if (!IS_ERR(drvdata->pclkin)) + clk_disable_unprepare(drvdata->pclkin); + return ret; } static const struct i2c_device_id si5351_i2c_ids[] = { diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index a947ab8b441a..533d9807e543 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -5,8 +5,6 @@ #ifndef __LINUX_PLATFORM_DATA_SI5351_H__ #define __LINUX_PLATFORM_DATA_SI5351_H__ -struct clk; - /** * enum si5351_pll_src - Si5351 pll clock source * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config @@ -107,8 +105,6 @@ struct si5351_clkout_config { * @clkout: array of clkout configuration */ struct si5351_platform_data { - struct clk *clk_xtal; - struct clk *clk_clkin; enum si5351_pll_src pll_src[2]; struct si5351_clkout_config clkout[8]; }; From 9a55706221812e4b609320ed41b7b149da981e51 Mon Sep 17 00:00:00 2001 From: Benoit Parrot Date: Fri, 8 May 2015 13:01:09 -0600 Subject: [PATCH 377/652] ARM: AM43xx: hwmod: add VPFE hwmod entries This patch adds VPFE HWMOD data for AM43xx. Signed-off-by: Benoit Parrot Signed-off-by: Darren Etheridge Signed-off-by: Felipe Balbi Signed-off-by: Lad, Prabhakar Tested-by: Benoit Parrot [paul@pwsan.com: updated to apply on v4.1-rc1] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 70 ++++++++++++++++++++++ arch/arm/mach-omap2/prcm43xx.h | 3 +- 2 files changed, 72 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index e2223148ba4d..17e8004fc20f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -544,6 +544,44 @@ static struct omap_hwmod am43xx_hdq1w_hwmod = { }, }; +static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x104, + .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am43xx_vpfe_hwmod_class = { + .name = "vpfe", + .sysc = &am43xx_vpfe_sysc, +}; + +static struct omap_hwmod am43xx_vpfe0_hwmod = { + .name = "vpfe0", + .class = &am43xx_vpfe_hwmod_class, + .clkdm_name = "l3s_clkdm", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET, + }, + }, +}; + +static struct omap_hwmod am43xx_vpfe1_hwmod = { + .name = "vpfe1", + .class = &am43xx_vpfe_hwmod_class, + .clkdm_name = "l3s_clkdm", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET, + }, + }, +}; + /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, @@ -825,6 +863,34 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = { + .master = &am43xx_vpfe0_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = { + .master = &am43xx_vpfe1_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_vpfe0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_vpfe1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, &am43xx_l4_ls__timer8, @@ -925,6 +991,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__dss_dispc, &am43xx_l4_ls__dss_rfbi, &am43xx_l4_ls__hdq1w, + &am43xx_l3__vpfe0, + &am43xx_l3__vpfe1, + &am43xx_l4_ls__vpfe0, + &am43xx_l4_ls__vpfe1, NULL, }; diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index 48df3b55057e..d0261996db6d 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -144,5 +144,6 @@ #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0 #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20 #define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0 - +#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068 +#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070 #endif From 4ebf5b288c57767ad62e63c5fc0e586f0210e36c Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 5 May 2015 16:33:04 +0300 Subject: [PATCH 378/652] ARM: OMAP4+: PRM: add support for passing status register/bit info to reset AM43xx has slightly different reset register layout compared to OMAP4+, with varying status bit shifts and status register offsets. Current code assumes static offsets and identical status / reset control bit shifts, which is wrong. This patch adds PRM core support for passing the actual implementations from hwmod code. AM43xx mappings will be fixed in subsequent patch. Signed-off-by: Tero Kristo Reported-by: Dave Gerlach Reported-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 12 ++++++++++-- arch/arm/mach-omap2/prminst44xx.c | 20 +++++++------------- 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 355b08936871..e482562075ef 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -171,6 +171,12 @@ */ #define LINKS_PER_OCP_IF 2 +/* + * Address offset (in bytes) between the reset control and the reset + * status registers: 4 bytes on OMAP4 + */ +#define OMAP4_RST_CTRL_ST_OFFSET 4 + /** * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations * @enable_module: function to enable a module (via MODULEMODE) @@ -3016,10 +3022,12 @@ static int _omap4_deassert_hardreset(struct omap_hwmod *oh, if (ohri->st_shift) pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", oh->name, ohri->name); - return omap_prm_deassert_hardreset(ohri->rst_shift, 0, + return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->rst_shift, oh->clkdm->pwrdm.ptr->prcm_partition, oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs, 0); + oh->prcm.omap4.rstctrl_offs, + oh->prcm.omap4.rstctrl_offs + + OMAP4_RST_CTRL_ST_OFFSET); } /** diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index c4859c4d3646..d0b15dbafa2e 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -87,12 +87,6 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, return v; } -/* - * Address offset (in bytes) between the reset control and the reset - * status registers: 4 bytes on OMAP4 - */ -#define OMAP4_RST_CTRL_ST_OFFSET 4 - /** * omap4_prminst_is_hardreset_asserted - read the HW reset line state of * submodules contained in the hwmod module @@ -141,11 +135,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and * wait * @shift: register bit shift corresponding to the reset line to deassert - * @st_shift: status bit offset, not used for OMAP4+ + * @st_shift: status bit offset corresponding to the reset line * @part: PRM partition * @inst: PRM instance offset * @rstctrl_offs: reset register offset - * @st_offs: reset status register offset, not used for OMAP4+ + * @rstst_offs: reset status register offset * * Some IPs like dsp, ipu or iva contain processors that require an HW * reset line to be asserted / deasserted in order to fully enable the @@ -157,11 +151,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, * of reset, or -EBUSY if the submodule did not exit reset promptly. */ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst, - u16 rstctrl_offs, u16 st_offs) + u16 rstctrl_offs, u16 rstst_offs) { int c; u32 mask = 1 << shift; - u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET; + u32 st_mask = 1 << st_shift; /* Check the current status to avoid de-asserting the line twice */ if (omap4_prminst_is_hardreset_asserted(shift, part, inst, @@ -169,13 +163,13 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst, return -EEXIST; /* Clear the reset status by writing 1 to the status bit */ - omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst, + omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst, rstst_offs); /* de-assert the reset control line */ omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs); /* wait the status to be set */ - omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst, - rstst_offs), + omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part, + inst, rstst_offs), MAX_MODULE_HARDRESET_WAIT, c); return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; From a5bf00cd735fbc293da8a9bada589c02861c8132 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 5 May 2015 16:33:05 +0300 Subject: [PATCH 379/652] ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality The reset code functionality is mostly a copy paste between OMAP4+ and AM33xx+. Re-use the omap4 code where possible, and just keep the special implementation for de-asserting the hardreset lines for AM33xx, as AM33xx+ devices have slightly different register layouts compared to OMAP4+. This patch also fixes the hardreset issues faced on AM43xx. Signed-off-by: Tero Kristo Reported-by: Dave Gerlach Reported-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 56 +++----------------------------- 1 file changed, 4 insertions(+), 52 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e482562075ef..752969ff9de0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3055,27 +3055,6 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, oh->prcm.omap4.rstctrl_offs); } -/** - * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args - * @oh: struct omap_hwmod * to assert hardreset - * @ohri: hardreset line data - * - * Call am33xx_prminst_assert_hardreset() with parameters extracted - * from the hwmod @oh and the hardreset line data @ohri. Only - * intended for use as an soc_ops function pointer. Passes along the - * return value from am33xx_prminst_assert_hardreset(). XXX This - * function is scheduled for removal when the PRM code is moved into - * drivers/. - */ -static int _am33xx_assert_hardreset(struct omap_hwmod *oh, - struct omap_hwmod_rst_info *ohri) - -{ - return omap_prm_assert_hardreset(ohri->rst_shift, 0, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); -} - /** * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args * @oh: struct omap_hwmod * to deassert hardreset @@ -3091,32 +3070,13 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh, static int _am33xx_deassert_hardreset(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0, + return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, oh->clkdm->pwrdm.ptr->prcm_offs, oh->prcm.omap4.rstctrl_offs, oh->prcm.omap4.rstst_offs); } -/** - * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args - * @oh: struct omap_hwmod * to test hardreset - * @ohri: hardreset line data - * - * Call am33xx_prminst_is_hardreset_asserted() with parameters - * extracted from the hwmod @oh and the hardreset line data @ohri. - * Only intended for use as an soc_ops function pointer. Passes along - * the return value from am33xx_prminst_is_hardreset_asserted(). XXX - * This function is scheduled for removal when the PRM code is moved - * into drivers/. - */ -static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh, - struct omap_hwmod_rst_info *ohri) -{ - return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); -} - /* Public functions */ u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) @@ -3916,21 +3876,13 @@ void __init omap_hwmod_init(void) soc_ops.init_clkdm = _init_clkdm; soc_ops.update_context_lost = _omap4_update_context_lost; soc_ops.get_context_lost = _omap4_get_context_lost; - } else if (soc_is_am43xx()) { + } else if (cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) { soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; soc_ops.assert_hardreset = _omap4_assert_hardreset; - soc_ops.deassert_hardreset = _omap4_deassert_hardreset; - soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; - soc_ops.init_clkdm = _init_clkdm; - } else if (cpu_is_ti816x() || soc_is_am33xx()) { - soc_ops.enable_module = _omap4_enable_module; - soc_ops.disable_module = _omap4_disable_module; - soc_ops.wait_target_ready = _omap4_wait_target_ready; - soc_ops.assert_hardreset = _am33xx_assert_hardreset; soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; - soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; } else { WARN(1, "omap_hwmod: unknown SoC type\n"); From 79010636174c78209e20c4f44370b2b13312e08c Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 22 Apr 2015 18:21:41 +0530 Subject: [PATCH 380/652] thermal: ti-soc-thermal: dra7: Implement Workaround for Errata i814 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bandgap Temperature read Dtemp can be corrupted DESCRIPTION Read accesses to registers listed below can be corrupted due to incorrect resynchronization between clock domains. Read access to registers below can be corrupted : • CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4) • CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n WORKAROUND Multiple reads to CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA[9:0]: BGAP_DTEMPMPU/GPU/CORE/DSPEVE/IVA is needed to discard false value and read right value: 1. Perform two successive reads to BGAP_DTEMP bit field. (a) If read1 returns Val1 and read2 returns Val1, then right value is Val1. (b) If read1 returns Val1, read 2 returns Val2, a third read is needed. 2. Perform third read (a) If read3 returns Val2 then right value is Val2. (b) If read3 returns Val3, then right value is Val3. The above in gist means if val1 and val2 are the same then we can go ahead with that value else we need a third read which will be right since synchronization will be complete by then. Signed-off-by: Keerthy Signed-off-by: Eduardo Valentin --- .../ti-soc-thermal/dra752-thermal-data.c | 3 +- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 37 ++++++++++++++++++- drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 ++ 3 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c index a4929272074f..58b5c6694cd4 100644 --- a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c @@ -420,7 +420,8 @@ const struct ti_bandgap_data dra752_data = { TI_BANDGAP_FEATURE_FREEZE_BIT | TI_BANDGAP_FEATURE_TALERT | TI_BANDGAP_FEATURE_COUNTER_DELAY | - TI_BANDGAP_FEATURE_HISTORY_BUFFER, + TI_BANDGAP_FEATURE_HISTORY_BUFFER | + TI_BANDGAP_FEATURE_ERRATA_814, .fclock_name = "l3instr_ts_gclk_div", .div_ck_name = "l3instr_ts_gclk_div", .conv_table = dra752_adc_to_temp, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 62a5d449c388..9747523858a1 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -118,6 +118,37 @@ exit: return ret; } +/** + * ti_errata814_bandgap_read_temp() - helper function to read dra7 sensor temperature + * @bgp: pointer to ti_bandgap structure + * @reg: desired register (offset) to be read + * + * Function to read dra7 bandgap sensor temperature. This is done separately + * so as to workaround the errata "Bandgap Temperature read Dtemp can be + * corrupted" - Errata ID: i814". + * Read accesses to registers listed below can be corrupted due to incorrect + * resynchronization between clock domains. + * Read access to registers below can be corrupted : + * CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4) + * CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n + * + * Return: the register value. + */ +static u32 ti_errata814_bandgap_read_temp(struct ti_bandgap *bgp, u32 reg) +{ + u32 val1, val2; + + val1 = ti_bandgap_readl(bgp, reg); + val2 = ti_bandgap_readl(bgp, reg); + + /* If both times we read the same value then that is right */ + if (val1 == val2) + return val1; + + /* if val1 and val2 are different read it third time */ + return ti_bandgap_readl(bgp, reg); +} + /** * ti_bandgap_read_temp() - helper function to read sensor temperature * @bgp: pointer to ti_bandgap structure @@ -148,7 +179,11 @@ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id) } /* read temperature */ - temp = ti_bandgap_readl(bgp, reg); + if (TI_BANDGAP_HAS(bgp, ERRATA_814)) + temp = ti_errata814_bandgap_read_temp(bgp, reg); + else + temp = ti_bandgap_readl(bgp, reg); + temp &= tsr->bgap_dtemp_mask; if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index b3adf72f252d..b2da3fc42b51 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -318,6 +318,9 @@ struct ti_temp_sensor { * TI_BANDGAP_FEATURE_HISTORY_BUFFER - used when the bandgap device features * a history buffer of temperatures. * + * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device + * has Errata 814 + * * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ @@ -331,6 +334,7 @@ struct ti_temp_sensor { #define TI_BANDGAP_FEATURE_FREEZE_BIT BIT(7) #define TI_BANDGAP_FEATURE_COUNTER_DELAY BIT(8) #define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) +#define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) #define TI_BANDGAP_HAS(b, f) \ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) From e9a90d046b9c9fe8f7c8efefe7b0e64c3c0daa8f Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 22 Apr 2015 18:21:42 +0530 Subject: [PATCH 381/652] thermal: ti-soc-thermal: OMAP5: Implement Workaround for Errata i813 DESCRIPTION Spurious Thermal Alert: Talert can happen randomly while the device remains under the temperature limit defined for this event to trig. This spurious event is caused by a incorrect re-synchronization between clock domains. The comparison between configured threshold and current temperature value can happen while the value is transitioning (metastable), thus causing inappropriate event generation. No spurious event occurs as long as the threshold value stays unchanged. Spurious event can be generated while a thermal alert threshold is modified in CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n. WORKAROUND Spurious event generation can be avoided by performing following sequence when the threshold is modified: 1. Mask the hot/cold events at the thermal IP level. 2. Modify Threshold. 3. Unmask the hot/cold events at the thermal IP level. Signed-off-by: Keerthy Signed-off-by: Eduardo Valentin --- .../ti-soc-thermal/omap5-thermal-data.c | 3 +- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 41 ++++++++++++++++++- drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 +- 3 files changed, 45 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c index eff0c80fd4af..79ff70c446ba 100644 --- a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c @@ -319,7 +319,8 @@ const struct ti_bandgap_data omap5430_data = { TI_BANDGAP_FEATURE_FREEZE_BIT | TI_BANDGAP_FEATURE_TALERT | TI_BANDGAP_FEATURE_COUNTER_DELAY | - TI_BANDGAP_FEATURE_HISTORY_BUFFER, + TI_BANDGAP_FEATURE_HISTORY_BUFFER | + TI_BANDGAP_FEATURE_ERRATA_813, .fclock_name = "l3instr_ts_gclk_div", .div_ck_name = "l3instr_ts_gclk_div", .conv_table = omap5430_adc_to_temp, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 9747523858a1..bc14dc874594 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -445,7 +445,7 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, { struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data; struct temp_sensor_registers *tsr; - u32 thresh_val, reg_val, t_hot, t_cold; + u32 thresh_val, reg_val, t_hot, t_cold, ctrl; int err = 0; tsr = bgp->conf->sensors[id].registers; @@ -477,8 +477,47 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask); reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) | (t_cold << __ffs(tsr->threshold_tcold_mask)); + + /** + * Errata i813: + * Spurious Thermal Alert: Talert can happen randomly while the device + * remains under the temperature limit defined for this event to trig. + * This spurious event is caused by a incorrect re-synchronization + * between clock domains. The comparison between configured threshold + * and current temperature value can happen while the value is + * transitioning (metastable), thus causing inappropriate event + * generation. No spurious event occurs as long as the threshold value + * stays unchanged. Spurious event can be generated while a thermal + * alert threshold is modified in + * CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n. + */ + + if (TI_BANDGAP_HAS(bgp, ERRATA_813)) { + /* Mask t_hot and t_cold events at the IP Level */ + ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + + if (hot) + ctrl &= ~tsr->mask_hot_mask; + else + ctrl &= ~tsr->mask_cold_mask; + + ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); + } + + /* Write the threshold value */ ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold); + if (TI_BANDGAP_HAS(bgp, ERRATA_813)) { + /* Unmask t_hot and t_cold events at the IP Level */ + ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + if (hot) + ctrl |= tsr->mask_hot_mask; + else + ctrl |= tsr->mask_cold_mask; + + ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); + } + if (err) { dev_err(bgp->dev, "failed to reprogram thot threshold\n"); err = -EIO; diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index b2da3fc42b51..0c52f7afba00 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -320,7 +320,8 @@ struct ti_temp_sensor { * * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device * has Errata 814 - * + * TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device + * has Errata 813 * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ @@ -335,6 +336,7 @@ struct ti_temp_sensor { #define TI_BANDGAP_FEATURE_COUNTER_DELAY BIT(8) #define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) #define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) +#define TI_BANDGAP_FEATURE_ERRATA_813 BIT(11) #define TI_BANDGAP_HAS(b, f) \ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) From 766c4cbfacd8634d7580bac6a1b8456e63de3e84 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 7 May 2015 19:24:57 -0400 Subject: [PATCH 382/652] namei: d_is_negative() should be checked before ->d_seq validation Fetching ->d_inode, verifying ->d_seq and finding d_is_negative() to be true does *not* mean that inode we'd fetched had been NULL - that holds only while ->d_seq is still unchanged. Shift d_is_negative() checks into lookup_fast() prior to ->d_seq verification. Reported-by: Steven Rostedt Tested-by: Steven Rostedt Signed-off-by: Al Viro --- fs/namei.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 4a8d998b7274..f67cf6cef986 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1415,6 +1415,7 @@ static int lookup_fast(struct nameidata *nd, */ if (nd->flags & LOOKUP_RCU) { unsigned seq; + bool negative; dentry = __d_lookup_rcu(parent, &nd->last, &seq); if (!dentry) goto unlazy; @@ -1424,8 +1425,11 @@ static int lookup_fast(struct nameidata *nd, * the dentry name information from lookup. */ *inode = dentry->d_inode; + negative = d_is_negative(dentry); if (read_seqcount_retry(&dentry->d_seq, seq)) return -ECHILD; + if (negative) + return -ENOENT; /* * This sequence count validates that the parent had no @@ -1472,6 +1476,10 @@ unlazy: goto need_lookup; } + if (unlikely(d_is_negative(dentry))) { + dput(dentry); + return -ENOENT; + } path->mnt = mnt; path->dentry = dentry; err = follow_managed(path, nd->flags); @@ -1583,10 +1591,10 @@ static inline int walk_component(struct nameidata *nd, struct path *path, goto out_err; inode = path->dentry->d_inode; + err = -ENOENT; + if (d_is_negative(path->dentry)) + goto out_path_put; } - err = -ENOENT; - if (d_is_negative(path->dentry)) - goto out_path_put; if (should_follow_link(path->dentry, follow)) { if (nd->flags & LOOKUP_RCU) { @@ -3036,14 +3044,13 @@ retry_lookup: BUG_ON(nd->flags & LOOKUP_RCU); inode = path->dentry->d_inode; -finish_lookup: - /* we _can_ be in RCU mode here */ error = -ENOENT; if (d_is_negative(path->dentry)) { path_to_nameidata(path, nd); goto out; } - +finish_lookup: + /* we _can_ be in RCU mode here */ if (should_follow_link(path->dentry, !symlink_ok)) { if (nd->flags & LOOKUP_RCU) { if (unlikely(nd->path.mnt != path->mnt || From f15133df088ecadd141ea1907f2c96df67c729f0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 May 2015 22:53:15 -0400 Subject: [PATCH 383/652] path_openat(): fix double fput() path_openat() jumps to the wrong place after do_tmpfile() - it has already done path_cleanup() (as part of path_lookupat() called by do_tmpfile()), so doing that again can lead to double fput(). Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Al Viro --- fs/namei.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index f67cf6cef986..fe30d3be43a8 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -3233,7 +3233,7 @@ static struct file *path_openat(int dfd, struct filename *pathname, if (unlikely(file->f_flags & __O_TMPFILE)) { error = do_tmpfile(dfd, pathname, nd, flags, op, file, &opened); - goto out; + goto out2; } error = path_init(dfd, pathname, flags, nd); @@ -3263,6 +3263,7 @@ static struct file *path_openat(int dfd, struct filename *pathname, } out: path_cleanup(nd); +out2: if (!(opened & FILE_OPENED)) { BUG_ON(!error); put_filp(file); From 4d2b6e4a9ebc2907e4a64fa240d8b67c7051e997 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 25 Mar 2015 22:16:24 +0100 Subject: [PATCH 384/652] thermal/intel_powerclamp: add __init / __exit annotations Mark the module init / exit functions with __init / __exit accodingly. This allows making the intel_powerclamp_ids[] array __initconst, too, as it only gets referenced from powerclamp_probe(). This is safe as file2alias doesn't care about the section, but the symbol name for the MODULE_DEVICE_TABLE alias. Cc: Arjan van de Ven Cc: Jacob Pan Signed-off-by: Mathias Krause Acked-by: Jacob Pan Acked-by: Jacob Pan Signed-off-by: Zhang Rui --- drivers/thermal/intel_powerclamp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index 12623bc02f46..b0f7ced5c3ef 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -667,7 +667,7 @@ static struct thermal_cooling_device_ops powerclamp_cooling_ops = { }; /* runs on Nehalem and later */ -static const struct x86_cpu_id intel_powerclamp_ids[] = { +static const struct x86_cpu_id intel_powerclamp_ids[] __initconst = { { X86_VENDOR_INTEL, 6, 0x1a}, { X86_VENDOR_INTEL, 6, 0x1c}, { X86_VENDOR_INTEL, 6, 0x1e}, @@ -694,7 +694,7 @@ static const struct x86_cpu_id intel_powerclamp_ids[] = { }; MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids); -static int powerclamp_probe(void) +static int __init powerclamp_probe(void) { if (!x86_match_cpu(intel_powerclamp_ids)) { pr_err("Intel powerclamp does not run on family %d model %d\n", @@ -760,7 +760,7 @@ file_error: debugfs_remove_recursive(debug_dir); } -static int powerclamp_init(void) +static int __init powerclamp_init(void) { int retval; int bitmap_size; @@ -809,7 +809,7 @@ exit_free: } module_init(powerclamp_init); -static void powerclamp_exit(void) +static void __exit powerclamp_exit(void) { unregister_hotcpu_notifier(&powerclamp_cpu_notifier); end_power_clamp(); From f09bfdb6670e08b004959de727eeec73baa753a2 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 7 Apr 2015 05:47:26 -0700 Subject: [PATCH 385/652] thermal/intel_powerclamp: add id for broadwell server Broadwell server has support for package C-states, idle injection works as expected on this platform. Signed-off-by: Jacob Pan Signed-off-by: Zhang Rui --- drivers/thermal/intel_powerclamp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index b0f7ced5c3ef..9b02d19ce1a4 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -689,6 +689,7 @@ static const struct x86_cpu_id intel_powerclamp_ids[] __initconst = { { X86_VENDOR_INTEL, 6, 0x46}, { X86_VENDOR_INTEL, 6, 0x4c}, { X86_VENDOR_INTEL, 6, 0x4d}, + { X86_VENDOR_INTEL, 6, 0x4f}, { X86_VENDOR_INTEL, 6, 0x56}, {} }; From d81861138898ce8d83bc78f0d558ac3984225e2b Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Thu, 7 May 2015 09:03:59 -0700 Subject: [PATCH 386/652] thermal/powerclamp: fix missing newer package c-states Package C8 to C10 was introduced in newer Intel CPUs, we need to include them in the package c-state residency calculation. Otherwise, idle injection target is not accurately maintained by the closed control loop. Also cleaned up the code to make it scale better with large number of c-states. Reported-by: Kristen Carlson Accardi Signed-off-by: Jacob Pan Signed-off-by: Zhang Rui --- drivers/thermal/intel_powerclamp.c | 78 ++++++++++++++++-------------- 1 file changed, 42 insertions(+), 36 deletions(-) diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index 9b02d19ce1a4..725718e97a0b 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -206,51 +206,57 @@ static void find_target_mwait(void) } +struct pkg_cstate_info { + bool skip; + int msr_index; + int cstate_id; +}; + +#define PKG_CSTATE_INIT(id) { \ + .msr_index = MSR_PKG_C##id##_RESIDENCY, \ + .cstate_id = id \ + } + +static struct pkg_cstate_info pkg_cstates[] = { + PKG_CSTATE_INIT(2), + PKG_CSTATE_INIT(3), + PKG_CSTATE_INIT(6), + PKG_CSTATE_INIT(7), + PKG_CSTATE_INIT(8), + PKG_CSTATE_INIT(9), + PKG_CSTATE_INIT(10), + {NULL}, +}; + static bool has_pkg_state_counter(void) { - u64 tmp; - return !rdmsrl_safe(MSR_PKG_C2_RESIDENCY, &tmp) || - !rdmsrl_safe(MSR_PKG_C3_RESIDENCY, &tmp) || - !rdmsrl_safe(MSR_PKG_C6_RESIDENCY, &tmp) || - !rdmsrl_safe(MSR_PKG_C7_RESIDENCY, &tmp); + u64 val; + struct pkg_cstate_info *info = pkg_cstates; + + /* check if any one of the counter msrs exists */ + while (info->msr_index) { + if (!rdmsrl_safe(info->msr_index, &val)) + return true; + info++; + } + + return false; } static u64 pkg_state_counter(void) { u64 val; u64 count = 0; + struct pkg_cstate_info *info = pkg_cstates; - static bool skip_c2; - static bool skip_c3; - static bool skip_c6; - static bool skip_c7; - - if (!skip_c2) { - if (!rdmsrl_safe(MSR_PKG_C2_RESIDENCY, &val)) - count += val; - else - skip_c2 = true; - } - - if (!skip_c3) { - if (!rdmsrl_safe(MSR_PKG_C3_RESIDENCY, &val)) - count += val; - else - skip_c3 = true; - } - - if (!skip_c6) { - if (!rdmsrl_safe(MSR_PKG_C6_RESIDENCY, &val)) - count += val; - else - skip_c6 = true; - } - - if (!skip_c7) { - if (!rdmsrl_safe(MSR_PKG_C7_RESIDENCY, &val)) - count += val; - else - skip_c7 = true; + while (info->msr_index) { + if (!info->skip) { + if (!rdmsrl_safe(info->msr_index, &val)) + count += val; + else + info->skip = true; + } + info++; } return count; From 0d0a2bf6ed4b489eef9a84450b3d90e6e001ce63 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Apr 2015 12:34:10 +0300 Subject: [PATCH 387/652] thermal: rockchip: fix an error code There is a copy and paste bug, "->clk" vs "->pclk", so we return the wrong error code here. Fixes: cbac8f639437 ('thermal: rockchip: add driver for thermal') Signed-off-by: Dan Carpenter Reviewed-by: Caesar Wang Reviewed-by: Doug Anderson Tested-by: Caesar Wang Signed-off-by: Zhang Rui --- drivers/thermal/rockchip_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 3aa46ac7cdbc..cd8f5f93b42c 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -529,7 +529,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev) thermal->pclk = devm_clk_get(&pdev->dev, "apb_pclk"); if (IS_ERR(thermal->pclk)) { - error = PTR_ERR(thermal->clk); + error = PTR_ERR(thermal->pclk); dev_err(&pdev->dev, "failed to get apb_pclk clock: %d\n", error); return error; From b100e77f179c15a072df571b2a253b3bc2308486 Mon Sep 17 00:00:00 2001 From: Anand Moon Date: Fri, 8 May 2015 03:39:04 +0930 Subject: [PATCH 388/652] tools/thermal: tmon: fixed the 'make install' command MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To install tmon we issue "make install" which produces bellow error. root@odroidxu3:/usr/src/odroidxu3-4.y-testing/tools/thermal/tmon# make install mkdir -p /usr/bin install -m 755 -p "tmon" "/usr/bin/tmon" mkdir -p / install -m 644 -p "" "/" install: cannot stat ‘’: No such file or directory make: [install] Error 1 (ignored) Signed-off-by: Anand Moon Acked-by: Jacob Pan Signed-off-by: Zhang Rui --- tools/thermal/tmon/Makefile | 8 -------- 1 file changed, 8 deletions(-) diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile index 0788621c8d76..2e83dd3655a2 100644 --- a/tools/thermal/tmon/Makefile +++ b/tools/thermal/tmon/Makefile @@ -12,10 +12,6 @@ TARGET=tmon INSTALL_PROGRAM=install -m 755 -p DEL_FILE=rm -f -INSTALL_CONFIGFILE=install -m 644 -p -CONFIG_FILE= -CONFIG_PATH= - # Static builds might require -ltinfo, for instance ifneq ($(findstring -static, $(LDFLAGS)),) STATIC := --static @@ -38,13 +34,9 @@ valgrind: tmon install: - mkdir -p $(INSTALL_ROOT)/$(BINDIR) - $(INSTALL_PROGRAM) "$(TARGET)" "$(INSTALL_ROOT)/$(BINDIR)/$(TARGET)" - - mkdir -p $(INSTALL_ROOT)/$(CONFIG_PATH) - - $(INSTALL_CONFIGFILE) "$(CONFIG_FILE)" "$(INSTALL_ROOT)/$(CONFIG_PATH)" uninstall: $(DEL_FILE) "$(INSTALL_ROOT)/$(BINDIR)/$(TARGET)" - $(CONFIG_FILE) "$(CONFIG_PATH)" - clean: find . -name "*.o" | xargs $(DEL_FILE) From efa86858e1d8970411a140fa1e0c4dd18a8f2a89 Mon Sep 17 00:00:00 2001 From: Nadav Haklai Date: Wed, 15 Apr 2015 19:08:08 +0200 Subject: [PATCH 389/652] thermal: armada: Update Armada 380 thermal sensor coefficients Improve the Armada 380 thermal sensor accuracy by using updated formula. The updated formula is: Temperature[C degrees] = 0.4761 * tsen_vsen_out - 279.1 Signed-off-by: Nadav Haklai Signed-off-by: Gregory CLEMENT Cc: #v3.16 Signed-off-by: Eduardo Valentin --- drivers/thermal/armada_thermal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index c2556cf5186b..01255fd65135 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -224,9 +224,9 @@ static const struct armada_thermal_data armada380_data = { .is_valid_shift = 10, .temp_shift = 0, .temp_mask = 0x3ff, - .coef_b = 1169498786UL, - .coef_m = 2000000UL, - .coef_div = 4289, + .coef_b = 2931108200UL, + .coef_m = 5000000UL, + .coef_div = 10502, .inverted = true, }; From d104d0152a97fade389f47635b73a9ccc7295d0b Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 30 Apr 2015 17:16:02 +0300 Subject: [PATCH 390/652] xhci: fix isoc endpoint dequeue from advancing too far on transaction error Isoc TDs usually consist of one TRB, sometimes two. When all goes well we receive only one success event for a TD, and move the dequeue pointer to the next TD. This fails if the TD consists of two TRBs and we get a transfer error on the first TRB, we will then see two events for that TD. Fix this by making sure the event we get is for the last TRB in that TD before moving the dequeue pointer to the next TD. This will resolve some of the uvc and dvb issues with the "ERROR Transfer event TRB DMA ptr not part of current TD" error message Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f5397a517c54..ae0894c7ee11 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2026,8 +2026,13 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, break; case COMP_DEV_ERR: case COMP_STALL: + frame->status = -EPROTO; + skip_td = true; + break; case COMP_TX_ERR: frame->status = -EPROTO; + if (event_trb != td->last_trb) + return 0; skip_td = true; break; case COMP_STOP: From 18cc2f4cbbaf825a4fedcf2d60fd388d291e0a38 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 30 Apr 2015 17:16:03 +0300 Subject: [PATCH 391/652] xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256 Our event ring consists of only one segment, and we risk filling the event ring in case we get isoc transfers with short intervals such as webcams that fill a TD every microframe (125us) With 64 TRB segment size one usb camera could fill the event ring in 8ms. A setup with several cameras and other devices can fill up the event ring as it is shared between all devices. This has occurred when uvcvideo queues 5 * 32TD URBs which then get cancelled when the video mode changes. The cancelled URBs are returned in the xhci interrupt context and blocks the interrupt handler from handling the new events. A full event ring will block xhci from scheduling traffic and affect all devices conneted to the xhci, will see errors such as Missed Service Intervals for isoc devices, and and Split transaction errors for LS/FS interrupt devices. Increasing the TRB_PER_SEGMENT will also increase the default endpoint ring size, which is welcome as for most isoc transfer we had to dynamically expand the endpoint ring anyway to be able to queue the 5 * 32TDs uvcvideo queues. The default size used to be 64 TRBs per segment Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8e421b89632d..ea75e8ccd3c1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1267,7 +1267,7 @@ union xhci_trb { * since the command ring is 64-byte aligned. * It must also be greater than 16. */ -#define TRBS_PER_SEGMENT 64 +#define TRBS_PER_SEGMENT 256 /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) From 948fa13504f80b9765d2b753691ab94c83a10341 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Thu, 30 Apr 2015 17:16:04 +0300 Subject: [PATCH 392/652] xhci: gracefully handle xhci_irq dead device If the xHCI host controller has died (ie, device removed) or suffered other serious fatal error (STS_FATAL), then xhci_irq should handle this condition with IRQ_HANDLED instead of -ESHUTDOWN. Signed-off-by: Joe Lawrence Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ae0894c7ee11..7d34cbfaf373 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2645,7 +2645,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) xhci_halt(xhci); hw_died: spin_unlock(&xhci->lock); - return -ESHUTDOWN; + return IRQ_HANDLED; } /* From ec61847855094d6f6144340b26f14203f25dd4e9 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 8 May 2015 14:07:50 +0100 Subject: [PATCH 393/652] Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit f2ee6dfa0e8597eea8b98d240b0033994e20d215. Jakub Kiciński observed that this patch can cause the pl011 driver to hang if if the only process with a pl011 port open is killed by a signal, pl011_shutdown() can get called with an arbitrary amount of data still in the FIFO. Calling _shutdown() with the TX FIFO non-empty is questionable behaviour and my itself be a bug. Since the affected patch was speculative anyway, and brings limited benefit, the simplest course is to remove the assumption that TXIS will always be left asserted after the port is shut down. Signed-off-by: Dave Martin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 5a4e9d579585..6f5a0720a8c8 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1639,6 +1639,9 @@ static int pl011_startup(struct uart_port *port) writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); + /* Assume that TX IRQ doesn't work until we see one: */ + uap->tx_irq_seen = 0; + spin_lock_irq(&uap->port.lock); /* restore RTS and DTR */ @@ -1702,7 +1705,7 @@ static void pl011_shutdown(struct uart_port *port) spin_lock_irq(&uap->port.lock); uap->im = 0; writew(uap->im, uap->port.membase + UART011_IMSC); - writew(0xffff & ~UART011_TXIS, uap->port.membase + UART011_ICR); + writew(0xffff, uap->port.membase + UART011_ICR); spin_unlock_irq(&uap->port.lock); pl011_dma_shutdown(uap); From 7e96c1b0e0f495c5a7450dc4aa7c9a24ba4305bd Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 8 May 2015 16:36:50 -0500 Subject: [PATCH 394/652] mnt: Fix fs_fully_visible to verify the root directory is visible This fixes a dumb bug in fs_fully_visible that allows proc or sys to be mounted if there is a bind mount of part of /proc/ or /sys/ visible. Cc: stable@vger.kernel.org Reported-by: Eric Windisch Signed-off-by: "Eric W. Biederman" --- fs/namespace.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/namespace.c b/fs/namespace.c index 1f4f9dac6e5a..1b9e11167bae 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -3179,6 +3179,12 @@ bool fs_fully_visible(struct file_system_type *type) if (mnt->mnt.mnt_sb->s_type != type) continue; + /* This mount is not fully visible if it's root directory + * is not the root directory of the filesystem. + */ + if (mnt->mnt.mnt_root != mnt->mnt.mnt_sb->s_root) + continue; + /* This mount is not fully visible if there are any child mounts * that cover anything except for empty directories. */ From dc703ec22074d9c71a12da20670369fac3ea4296 Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Sat, 9 May 2015 11:09:11 -0600 Subject: [PATCH 395/652] Added another USB product ID for ELAN touchscreen quirks. I've had the same issue as described in commit c68929f75dfcb6354918862b91b5778585de1fa5 Except my touchscreen's ID is ID 04f3:0125 Elan Microelectronics Corp. Signed-off-by: Logan Gunthorpe Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 41e510ae8c83..d85abfed84cc 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -106,6 +106,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x010c), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x0125), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x016f), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, From 1a9f064f516c36d018754407b41921c996439ecf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 9 May 2015 03:39:52 +0930 Subject: [PATCH 396/652] m32r: make flush_cpumask non-volatile. We cast away the volatile, but really, why make it volatile at all? We already do a mb() inside the cpumask_empty() loop. Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- arch/m32r/kernel/smp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index ce7aea34fdf4..c18ddc74ef9a 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -45,7 +45,7 @@ static volatile unsigned long flushcache_cpumask = 0; /* * For flush_tlb_others() */ -static volatile cpumask_t flush_cpumask; +static cpumask_t flush_cpumask; static struct mm_struct *flush_mm; static struct vm_area_struct *flush_vma; static volatile unsigned long flush_va; @@ -415,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, */ send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0); - while (!cpumask_empty((cpumask_t*)&flush_cpumask)) { + while (!cpumask_empty(&flush_cpumask)) { /* nothing. lockup detection does not belong here */ mb(); } @@ -468,7 +468,7 @@ void smp_invalidate_interrupt(void) __flush_tlb_page(va); } } - cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask); + cpumask_clear_cpu(cpu_id, &flush_cpumask); } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ From e16e888b525503be05b3aea64190e8b3bdef44d0 Mon Sep 17 00:00:00 2001 From: Markus Stenberg Date: Tue, 5 May 2015 13:36:59 +0300 Subject: [PATCH 397/652] ipv6: Fixed source specific default route handling. If there are only IPv6 source specific default routes present, the host gets -ENETUNREACH on e.g. connect() because ip6_dst_lookup_tail calls ip6_route_output first, and given source address any, it fails, and ip6_route_get_saddr is never called. The change is to use the ip6_route_get_saddr, even if the initial ip6_route_output fails, and then doing ip6_route_output _again_ after we have appropriate source address available. Note that this is '99% fix' to the problem; a correct fix would be to do route lookups only within addrconf.c when picking a source address, and never call ip6_route_output before source address has been populated. Signed-off-by: Markus Stenberg Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 41 ++++++++++++++++++++++++++++++++--------- net/ipv6/route.c | 5 +++-- 2 files changed, 35 insertions(+), 11 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 7fde1f265c90..c21777565c58 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -886,6 +886,38 @@ static int ip6_dst_lookup_tail(struct sock *sk, #endif int err; + /* The correct way to handle this would be to do + * ip6_route_get_saddr, and then ip6_route_output; however, + * the route-specific preferred source forces the + * ip6_route_output call _before_ ip6_route_get_saddr. + * + * In source specific routing (no src=any default route), + * ip6_route_output will fail given src=any saddr, though, so + * that's why we try it again later. + */ + if (ipv6_addr_any(&fl6->saddr) && (!*dst || !(*dst)->error)) { + struct rt6_info *rt; + bool had_dst = *dst != NULL; + + if (!had_dst) + *dst = ip6_route_output(net, sk, fl6); + rt = (*dst)->error ? NULL : (struct rt6_info *)*dst; + err = ip6_route_get_saddr(net, rt, &fl6->daddr, + sk ? inet6_sk(sk)->srcprefs : 0, + &fl6->saddr); + if (err) + goto out_err_release; + + /* If we had an erroneous initial result, pretend it + * never existed and let the SA-enabled version take + * over. + */ + if (!had_dst && (*dst)->error) { + dst_release(*dst); + *dst = NULL; + } + } + if (!*dst) *dst = ip6_route_output(net, sk, fl6); @@ -893,15 +925,6 @@ static int ip6_dst_lookup_tail(struct sock *sk, if (err) goto out_err_release; - if (ipv6_addr_any(&fl6->saddr)) { - struct rt6_info *rt = (struct rt6_info *) *dst; - err = ip6_route_get_saddr(net, rt, &fl6->daddr, - sk ? inet6_sk(sk)->srcprefs : 0, - &fl6->saddr); - if (err) - goto out_err_release; - } - #ifdef CONFIG_IPV6_OPTIMISTIC_DAD /* * Here if the dst entry we've looked up diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 5c48293ff062..d3588885f097 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2245,9 +2245,10 @@ int ip6_route_get_saddr(struct net *net, unsigned int prefs, struct in6_addr *saddr) { - struct inet6_dev *idev = ip6_dst_idev((struct dst_entry *)rt); + struct inet6_dev *idev = + rt ? ip6_dst_idev((struct dst_entry *)rt) : NULL; int err = 0; - if (rt->rt6i_prefsrc.plen) + if (rt && rt->rt6i_prefsrc.plen) *saddr = rt->rt6i_prefsrc.addr; else err = ipv6_dev_get_saddr(net, idev ? idev->dev : NULL, From f711a6ae062caeee46067b2f2f12ffda319ae73c Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Tue, 5 May 2015 15:20:51 -0400 Subject: [PATCH 398/652] net/rds: RDS-TCP: Always create a new rds_sock for an incoming connection. When running RDS over TCP, the active (client) side connects to the listening ("passive") side at the RDS_TCP_PORT. After the connection is established, if the client side reboots (potentially without even sending a FIN) the server still has a TCP socket in the esablished state. If the server-side now gets a new SYN comes from the client with a different client port, TCP will create a new socket-pair, but the RDS layer will incorrectly pull up the old rds_connection (which is still associated with the stale t_sock and RDS socket state). This patch corrects this behavior by having rds_tcp_accept_one() always create a new connection for an incoming TCP SYN. The rds and tcp state associated with the old socket-pair is cleaned up via the rds_tcp_state_change() callback which would typically be invoked in most cases when the client-TCP sends a FIN on TCP restart, triggering a transition to CLOSE_WAIT state. In the rarer event of client death without a FIN, TCP_KEEPALIVE probes on the socket will detect the stale socket, and the TCP transition to CLOSE state will trigger the RDS state cleanup. Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller --- net/rds/connection.c | 4 ++++ net/rds/tcp_connect.c | 1 + net/rds/tcp_listen.c | 46 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+) diff --git a/net/rds/connection.c b/net/rds/connection.c index 14f041398ca1..60f0cd6ed15f 100644 --- a/net/rds/connection.c +++ b/net/rds/connection.c @@ -126,7 +126,10 @@ static struct rds_connection *__rds_conn_create(__be32 laddr, __be32 faddr, struct rds_transport *loop_trans; unsigned long flags; int ret; + struct rds_transport *otrans = trans; + if (!is_outgoing && otrans->t_type == RDS_TRANS_TCP) + goto new_conn; rcu_read_lock(); conn = rds_conn_lookup(head, laddr, faddr, trans); if (conn && conn->c_loopback && conn->c_trans != &rds_loop_transport && @@ -142,6 +145,7 @@ static struct rds_connection *__rds_conn_create(__be32 laddr, __be32 faddr, if (conn) goto out; +new_conn: conn = kmem_cache_zalloc(rds_conn_slab, gfp); if (!conn) { conn = ERR_PTR(-ENOMEM); diff --git a/net/rds/tcp_connect.c b/net/rds/tcp_connect.c index f9f564a6c960..973109c7b8e8 100644 --- a/net/rds/tcp_connect.c +++ b/net/rds/tcp_connect.c @@ -62,6 +62,7 @@ void rds_tcp_state_change(struct sock *sk) case TCP_ESTABLISHED: rds_connect_complete(conn); break; + case TCP_CLOSE_WAIT: case TCP_CLOSE: rds_conn_drop(conn); default: diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c index 23ab4dcd1d9f..0da49e34495f 100644 --- a/net/rds/tcp_listen.c +++ b/net/rds/tcp_listen.c @@ -45,12 +45,45 @@ static void rds_tcp_accept_worker(struct work_struct *work); static DECLARE_WORK(rds_tcp_listen_work, rds_tcp_accept_worker); static struct socket *rds_tcp_listen_sock; +static int rds_tcp_keepalive(struct socket *sock) +{ + /* values below based on xs_udp_default_timeout */ + int keepidle = 5; /* send a probe 'keepidle' secs after last data */ + int keepcnt = 5; /* number of unack'ed probes before declaring dead */ + int keepalive = 1; + int ret = 0; + + ret = kernel_setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, + (char *)&keepalive, sizeof(keepalive)); + if (ret < 0) + goto bail; + + ret = kernel_setsockopt(sock, IPPROTO_TCP, TCP_KEEPCNT, + (char *)&keepcnt, sizeof(keepcnt)); + if (ret < 0) + goto bail; + + ret = kernel_setsockopt(sock, IPPROTO_TCP, TCP_KEEPIDLE, + (char *)&keepidle, sizeof(keepidle)); + if (ret < 0) + goto bail; + + /* KEEPINTVL is the interval between successive probes. We follow + * the model in xs_tcp_finish_connecting() and re-use keepidle. + */ + ret = kernel_setsockopt(sock, IPPROTO_TCP, TCP_KEEPINTVL, + (char *)&keepidle, sizeof(keepidle)); +bail: + return ret; +} + static int rds_tcp_accept_one(struct socket *sock) { struct socket *new_sock = NULL; struct rds_connection *conn; int ret; struct inet_sock *inet; + struct rds_tcp_connection *rs_tcp; ret = sock_create_lite(sock->sk->sk_family, sock->sk->sk_type, sock->sk->sk_protocol, &new_sock); @@ -63,6 +96,10 @@ static int rds_tcp_accept_one(struct socket *sock) if (ret < 0) goto out; + ret = rds_tcp_keepalive(new_sock); + if (ret < 0) + goto out; + rds_tcp_tune(new_sock); inet = inet_sk(new_sock->sk); @@ -77,6 +114,15 @@ static int rds_tcp_accept_one(struct socket *sock) ret = PTR_ERR(conn); goto out; } + /* An incoming SYN request came in, and TCP just accepted it. + * We always create a new conn for listen side of TCP, and do not + * add it to the c_hash_list. + * + * If the client reboots, this conn will need to be cleaned up. + * rds_tcp_state_change() will do that cleanup + */ + rs_tcp = (struct rds_tcp_connection *)conn->c_transport_data; + WARN_ON(!rs_tcp || rs_tcp->t_sock); /* * see the comment above rds_queue_delayed_reconnect() From c82ac7e69efe6dbe370d6ba84e2666d7692ef1c2 Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Tue, 5 May 2015 15:20:52 -0400 Subject: [PATCH 399/652] net/rds: RDS-TCP: only initiate reconnect attempt on outgoing TCP socket. When the peer of an RDS-TCP connection restarts, a reconnect attempt should only be made from the active side of the TCP connection, i.e. the side that has a transient TCP port number. Do not add the passive side of the TCP connection to the c_hash_node and thus avoid triggering rds_queue_reconnect() for passive rds connections. Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller --- net/rds/connection.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/rds/connection.c b/net/rds/connection.c index 60f0cd6ed15f..da6da57e5f36 100644 --- a/net/rds/connection.c +++ b/net/rds/connection.c @@ -234,13 +234,22 @@ new_conn: /* Creating normal conn */ struct rds_connection *found; - found = rds_conn_lookup(head, laddr, faddr, trans); + if (!is_outgoing && otrans->t_type == RDS_TRANS_TCP) + found = NULL; + else + found = rds_conn_lookup(head, laddr, faddr, trans); if (found) { trans->conn_free(conn->c_transport_data); kmem_cache_free(rds_conn_slab, conn); conn = found; } else { - hlist_add_head_rcu(&conn->c_hash_node, head); + if ((is_outgoing && otrans->t_type == RDS_TRANS_TCP) || + (otrans->t_type != RDS_TRANS_TCP)) { + /* Only the active side should be added to + * reconnect list for TCP. + */ + hlist_add_head_rcu(&conn->c_hash_node, head); + } rds_cong_add_conn(conn); rds_conn_count++; } From bfbb92c446700da645e4834fb01439097846ce1e Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Tue, 5 May 2015 15:00:25 -0500 Subject: [PATCH 400/652] net: macb: Handle the RXUBR interrupt on all devices The same hardware issue the at91 must work around applies to at least the Zynq ethernet, and possibly more devices. The driver also needs to handle the RXUBR interrupt since it turns it on with MACB_RX_INT_FLAGS anyway. Signed-off-by: Nathan Sullivan Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 4104d49f005d..61aa570aad9a 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -981,7 +981,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) struct macb_queue *queue = dev_id; struct macb *bp = queue->bp; struct net_device *dev = bp->dev; - u32 status; + u32 status, ctrl; status = queue_readl(queue, ISR); @@ -1037,6 +1037,15 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * add that if/when we get our hands on a full-blown MII PHY. */ + if (status & MACB_BIT(RXUBR)) { + ctrl = macb_readl(bp, NCR); + macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE)); + macb_writel(bp, NCR, ctrl | MACB_BIT(RE)); + + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(RXUBR)); + } + if (status & MACB_BIT(ISR_ROVR)) { /* We missed at least one packet */ if (macb_is_gem(bp)) From 1006da19ea6603135773a79f09e4e931be460429 Mon Sep 17 00:00:00 2001 From: Vasily Titskiy Date: Wed, 6 May 2015 10:31:21 -0400 Subject: [PATCH 401/652] drivers/net/usb: Add support for 'Lenovo OneLink Pro Dock' This device is sold as 'Lenovo OneLink Pro Dock'. Chipset is RTL8153 and works with r8152. Signed-off-by: Vasily Titskiy Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ac4d03b328b1..aafa1a1898e4 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4116,6 +4116,7 @@ static struct usb_device_id rtl8152_table[] = { {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)}, {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7205)}, + {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f)}, {} }; From d744318574090c3b796915d9d710bdb17db191a1 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 5 May 2015 15:22:02 -0700 Subject: [PATCH 402/652] net_sched: fix a use-after-free in tc_ctl_tfilter() When tcf_destroy() returns true, tp could be already destroyed, we should not use tp->next after that. For long term, we probably should move tp list to list_head. Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/sched/cls_api.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 8b0470e418dc..b6ef9a04de06 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -308,12 +308,11 @@ replay: case RTM_DELTFILTER: err = tp->ops->delete(tp, fh); if (err == 0) { - tfilter_notify(net, skb, n, tp, fh, RTM_DELTFILTER); - if (tcf_destroy(tp, false)) { - struct tcf_proto *next = rtnl_dereference(tp->next); + struct tcf_proto *next = rtnl_dereference(tp->next); + tfilter_notify(net, skb, n, tp, fh, RTM_DELTFILTER); + if (tcf_destroy(tp, false)) RCU_INIT_POINTER(*back, next); - } } goto errout; case RTM_GETTFILTER: From 74a78b15e6e3dd909a39e0d99dfa0268c126e2c6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 May 2015 09:04:40 +0200 Subject: [PATCH 403/652] net: amd-xgbe: Add hardware dependency The amd-xgbe driver currently only works with the Seattle SoC, which is ARM64 architecture, so there is no point in building this driver on other architectures except for build testing purpose. The dependency list can be updated later if the driver ever supports other architectures. Signed-off-by: Jean Delvare Cc: Tom Lendacky Cc: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/Kconfig | 1 + drivers/net/phy/Kconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 089c269637b7..426916036151 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -180,6 +180,7 @@ config SUNLANCE config AMD_XGBE tristate "AMD 10GbE Ethernet driver" depends on (OF_NET || ACPI) && HAS_IOMEM && HAS_DMA + depends on ARM64 || COMPILE_TEST select PHYLIB select AMD_XGBE_PHY select BITREVERSE diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 8fadaa14b9f0..70641d2c0429 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -27,6 +27,7 @@ config AMD_PHY config AMD_XGBE_PHY tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" depends on (OF || ACPI) && HAS_IOMEM + depends on ARM64 || COMPILE_TEST ---help--- Currently supports the AMD 10GbE PHY From ccad725ccb068851fbce2022b2a51fa458d1eac1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 May 2015 09:14:34 +0200 Subject: [PATCH 404/652] net: xgene_enet: Set hardware dependency The xgene_enet driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare Cc: Iyappan Subramanian Cc: Keyur Chudgar Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/apm/xgene/Kconfig b/drivers/net/ethernet/apm/xgene/Kconfig index f4054d242f3c..19e38afbc5ee 100644 --- a/drivers/net/ethernet/apm/xgene/Kconfig +++ b/drivers/net/ethernet/apm/xgene/Kconfig @@ -1,6 +1,7 @@ config NET_XGENE tristate "APM X-Gene SoC Ethernet Driver" depends on HAS_DMA + depends on ARCH_XGENE || COMPILE_TEST select PHYLIB help This is the Ethernet driver for the on-chip ethernet interface on the From 240b23c4269777abba4eba43acd1f53ec530bb7d Mon Sep 17 00:00:00 2001 From: Tony Camuso Date: Wed, 6 May 2015 09:09:18 -0400 Subject: [PATCH 405/652] netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2) This patch should have been part of the previous patch having the same summary. See http://marc.info/?l=linux-kernel&m=143039470103795&w=2 Unfortunately, I didn't check to see where else this lock was used before submitting that patch. This should take care of it for netxen_nic, as I did a thorough search this time. To recap from the original patch; although testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled did not produce any traces, it would be more prudent in the case of tx_clean_lock to use _bh versions of spin_[un]lock, since this lock is manipulated in both the process and softirq contexts. This patch was tested for functionality and regressions with netperf and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled. Signed-off-by: Tony Camuso Acked-By: Neil Horman Acked-By: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index 8da7c3faf817..7b43a3b4abdc 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -1764,7 +1764,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) int done = 0; struct nx_host_tx_ring *tx_ring = adapter->tx_ring; - if (!spin_trylock(&adapter->tx_clean_lock)) + if (!spin_trylock_bh(&adapter->tx_clean_lock)) return 1; sw_consumer = tx_ring->sw_consumer; @@ -1819,7 +1819,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) */ hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer)); done = (sw_consumer == hw_consumer); - spin_unlock(&adapter->tx_clean_lock); + spin_unlock_bh(&adapter->tx_clean_lock); return done; } From 3e4336a65ab6b45cbac10b8347c8f8951fec515d Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 6 May 2015 15:09:40 +0200 Subject: [PATCH 406/652] usbnet: avoid integer overflow in start_xmit transfer_buffer_length is of type u32. It's therefore wrong to assign it to a signed integer. This patch avoids the overflow. It's worth noting that entry->length here is a long; perhaps it would be beneficial at somepoint to change this to be unsigned as well, if nothing else relies on its signedness for error conditions or the like. Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 733f4feb2ef3..3c86b107275a 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1285,7 +1285,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) { struct usbnet *dev = netdev_priv(net); - int length; + unsigned int length; struct urb *urb = NULL; struct skb_data *entry; struct driver_info *info = dev->driver_info; @@ -1413,7 +1413,7 @@ not_drop: } } else netif_dbg(dev, tx_queued, dev->net, - "> tx, len %d, type 0x%x\n", length, skb->protocol); + "> tx, len %u, type 0x%x\n", length, skb->protocol); #ifdef CONFIG_PM deferred: #endif From 78f5b899195019f71f7593c604d75ca61658eae3 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Thu, 7 May 2015 08:08:51 -0700 Subject: [PATCH 407/652] mpls: Change reserved label names to be consistent with netbsd Since these are now visible to userspace it is nice to be consistent with BSD (sys/netmpls/mpls.h in netBSD). Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/uapi/linux/mpls.h | 12 ++++++------ net/mpls/af_mpls.c | 18 +++++++++--------- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h index 0fe6ea5a41d5..139d4dd1cab8 100644 --- a/include/uapi/linux/mpls.h +++ b/include/uapi/linux/mpls.h @@ -32,13 +32,13 @@ struct mpls_label { #define MPLS_LS_TTL_SHIFT 0 /* Reserved labels */ -#define MPLS_LABEL_IPV4_EXPLICIT_NULL 0 /* RFC3032 */ -#define MPLS_LABEL_ROUTER_ALERT 1 /* RFC3032 */ -#define MPLS_LABEL_IPV6_EXPLICIT_NULL 2 /* RFC3032 */ -#define MPLS_LABEL_IMPLICIT_NULL 3 /* RFC3032 */ -#define MPLS_LABEL_ENTROPY_INDICATOR 7 /* RFC6790 */ +#define MPLS_LABEL_IPV4NULL 0 /* RFC3032 */ +#define MPLS_LABEL_RTALERT 1 /* RFC3032 */ +#define MPLS_LABEL_IPV6NULL 2 /* RFC3032 */ +#define MPLS_LABEL_IMPLNULL 3 /* RFC3032 */ +#define MPLS_LABEL_ENTROPY 7 /* RFC6790 */ #define MPLS_LABEL_GAL 13 /* RFC5586 */ -#define MPLS_LABEL_OAM_ALERT 14 /* RFC3429 */ +#define MPLS_LABEL_OAMALERT 14 /* RFC3429 */ #define MPLS_LABEL_EXTENSION 15 /* RFC7274 */ #endif /* _UAPI_MPLS_H */ diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c index b6eb7615960a..7b3f732269e4 100644 --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -647,7 +647,7 @@ int nla_get_labels(const struct nlattr *nla, return -EINVAL; switch (dec.label) { - case MPLS_LABEL_IMPLICIT_NULL: + case MPLS_LABEL_IMPLNULL: /* RFC3032: This is a label that an LSR may * assign and distribute, but which never * actually appears in the encapsulation. @@ -935,7 +935,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) } /* In case the predefined labels need to be populated */ - if (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV4NULL) { struct net_device *lo = net->loopback_dev; rt0 = mpls_rt_alloc(lo->addr_len); if (!rt0) @@ -945,7 +945,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) rt0->rt_via_table = NEIGH_LINK_TABLE; memcpy(rt0->rt_via, lo->dev_addr, lo->addr_len); } - if (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV6NULL) { struct net_device *lo = net->loopback_dev; rt2 = mpls_rt_alloc(lo->addr_len); if (!rt2) @@ -973,15 +973,15 @@ static int resize_platform_label_table(struct net *net, size_t limit) memcpy(labels, old, cp_size); /* If needed set the predefined labels */ - if ((old_limit <= MPLS_LABEL_IPV6_EXPLICIT_NULL) && - (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[MPLS_LABEL_IPV6_EXPLICIT_NULL], rt2); + if ((old_limit <= MPLS_LABEL_IPV6NULL) && + (limit > MPLS_LABEL_IPV6NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV6NULL], rt2); rt2 = NULL; } - if ((old_limit <= MPLS_LABEL_IPV4_EXPLICIT_NULL) && - (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[MPLS_LABEL_IPV4_EXPLICIT_NULL], rt0); + if ((old_limit <= MPLS_LABEL_IPV4NULL) && + (limit > MPLS_LABEL_IPV4NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV4NULL], rt0); rt0 = NULL; } From daaf40e53b5dbdf75255d58a45ce8ac65ca511a8 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 10 May 2015 12:04:01 +0530 Subject: [PATCH 408/652] ARC: unbork !LLSC build Fixes: f7d11e93ee97a locking,arch,arc: Fold atomic_ops Cc: # 3.18 Signed-off-by: Vineet Gupta --- arch/arc/include/asm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h index 067551b6920a..9917a45fc430 100644 --- a/arch/arc/include/asm/atomic.h +++ b/arch/arc/include/asm/atomic.h @@ -99,7 +99,7 @@ static inline void atomic_##op(int i, atomic_t *v) \ atomic_ops_unlock(flags); \ } -#define ATOMIC_OP_RETURN(op, c_op) \ +#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ static inline int atomic_##op##_return(int i, atomic_t *v) \ { \ unsigned long flags; \ From 892c89d5d7ffd1bb794fe54d86c0eef18d215fab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C5=82awomir=20Demeszko?= Date: Tue, 5 May 2015 17:49:54 +0200 Subject: [PATCH 409/652] staging: gdm724x: Correction of variable usage after applying ALIGN() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix regression introduced by commit <29ef8a53542a>. After it writing AT commands to /dev/GCT-ATM0 is unsuccessful (no echo, no response) and dmesg show "gdmtty: invalid payload : 1 16 f011". Before that commit value of dummy_cnt was only a padding size. After using ALIGN() this value is increased by its first argument. So the following usage of this variable needs correction. Signed-off-by: Sławomir Demeszko Cc: stable # 3.14+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/gdm724x/gdm_mux.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/staging/gdm724x/gdm_mux.c b/drivers/staging/gdm724x/gdm_mux.c index 8199b0a697bb..1cf24e4edf25 100644 --- a/drivers/staging/gdm724x/gdm_mux.c +++ b/drivers/staging/gdm724x/gdm_mux.c @@ -158,7 +158,7 @@ static int up_to_host(struct mux_rx *r) unsigned int start_flag; unsigned int payload_size; unsigned short packet_type; - int dummy_cnt; + int total_len; u32 packet_size_sum = r->offset; int index; int ret = TO_HOST_INVALID_PACKET; @@ -176,10 +176,10 @@ static int up_to_host(struct mux_rx *r) break; } - dummy_cnt = ALIGN(MUX_HEADER_SIZE + payload_size, 4); + total_len = ALIGN(MUX_HEADER_SIZE + payload_size, 4); if (len - packet_size_sum < - MUX_HEADER_SIZE + payload_size + dummy_cnt) { + total_len) { pr_err("invalid payload : %d %d %04x\n", payload_size, len, packet_type); break; @@ -202,7 +202,7 @@ static int up_to_host(struct mux_rx *r) break; } - packet_size_sum += MUX_HEADER_SIZE + payload_size + dummy_cnt; + packet_size_sum += total_len; if (len - packet_size_sum <= MUX_HEADER_SIZE + 2) { ret = r->callback(NULL, 0, @@ -361,7 +361,6 @@ static int gdm_mux_send(void *priv_dev, void *data, int len, int tty_index, struct mux_pkt_header *mux_header; struct mux_tx *t = NULL; static u32 seq_num = 1; - int dummy_cnt; int total_len; int ret; unsigned long flags; @@ -374,9 +373,7 @@ static int gdm_mux_send(void *priv_dev, void *data, int len, int tty_index, spin_lock_irqsave(&mux_dev->write_lock, flags); - dummy_cnt = ALIGN(MUX_HEADER_SIZE + len, 4); - - total_len = len + MUX_HEADER_SIZE + dummy_cnt; + total_len = ALIGN(MUX_HEADER_SIZE + len, 4); t = alloc_mux_tx(total_len); if (!t) { @@ -392,7 +389,8 @@ static int gdm_mux_send(void *priv_dev, void *data, int len, int tty_index, mux_header->packet_type = __cpu_to_le16(packet_type[tty_index]); memcpy(t->buf+MUX_HEADER_SIZE, data, len); - memset(t->buf+MUX_HEADER_SIZE+len, 0, dummy_cnt); + memset(t->buf+MUX_HEADER_SIZE+len, 0, total_len - MUX_HEADER_SIZE - + len); t->len = total_len; t->callback = cb; From 172115090f5e739660b97694618a2ba86457063a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Apr 2015 11:09:44 +0200 Subject: [PATCH 410/652] usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices Without this flag some versions of these enclosures do not work. Cc: stable@vger.kernel.org Reported-and-tested-by: Christian Schaller Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d684b4b8108f..caf188800c67 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -766,6 +766,13 @@ UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_GO_SLOW ), +/* Reported by Christian Schaller */ +UNUSUAL_DEV( 0x059f, 0x0651, 0x0000, 0x0000, + "LaCie", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT ), + /* Submitted by Joel Bourquard * Some versions of this device need the SubClass and Protocol overrides * while others don't. From 17d489019c5249d059768184c80e9b2b0269b81e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 29 Apr 2015 14:49:07 +1000 Subject: [PATCH 411/652] KVM: PPC: Book3S HV: Fix list traversal in error case This fixes a regression introduced in commit 25fedfca94cf, "KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu", which leads to a user-triggerable oops. In the case where we try to run a vcore on a physical core that is not in single-threaded mode, or the vcore has too many threads for the physical core, we iterate the list of runnable vcpus to make each one return an EBUSY error to userspace. Since this involves taking each vcpu off the runnable_threads list for the vcore, we need to use list_for_each_entry_safe rather than list_for_each_entry to traverse the list. Otherwise the kernel will crash with an oops message like this: Unable to handle kernel paging request for data at address 0x000fff88 Faulting instruction address: 0xd00000001e635dc8 Oops: Kernel access of bad area, sig: 11 [#2] SMP NR_CPUS=1024 NUMA PowerNV ... CPU: 48 PID: 91256 Comm: qemu-system-ppc Tainted: G D 3.18.0 #1 task: c00000274e507500 ti: c0000027d1924000 task.ti: c0000027d1924000 NIP: d00000001e635dc8 LR: d00000001e635df8 CTR: c00000000011ba50 REGS: c0000027d19275b0 TRAP: 0300 Tainted: G D (3.18.0) MSR: 9000000000009033 CR: 22002824 XER: 00000000 CFAR: c000000000008468 DAR: 00000000000fff88 DSISR: 40000000 SOFTE: 1 GPR00: d00000001e635df8 c0000027d1927830 d00000001e64c850 0000000000000001 GPR04: 0000000000000001 0000000000000001 0000000000000000 0000000000000000 GPR08: 0000000000200200 0000000000000000 0000000000000000 d00000001e63e588 GPR12: 0000000000002200 c000000007dbc800 c000000fc7800000 000000000000000a GPR16: fffffffffffffffc c000000fd5439690 c000000fc7801c98 0000000000000001 GPR20: 0000000000000003 c0000027d1927aa8 c000000fd543b348 c000000fd543b350 GPR24: 0000000000000000 c000000fa57f0000 0000000000000030 0000000000000000 GPR28: fffffffffffffff0 c000000fd543b328 00000000000fe468 c000000fd543b300 NIP [d00000001e635dc8] kvmppc_run_core+0x198/0x17c0 [kvm_hv] LR [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv] Call Trace: [c0000027d1927830] [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv] (unreliable) [c0000027d1927a30] [d00000001e638350] kvmppc_vcpu_run_hv+0x5b0/0xdd0 [kvm_hv] [c0000027d1927b70] [d00000001e510504] kvmppc_vcpu_run+0x44/0x60 [kvm] [c0000027d1927ba0] [d00000001e50d4a4] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm] [c0000027d1927be0] [d00000001e504be8] kvm_vcpu_ioctl+0x5e8/0x7a0 [kvm] [c0000027d1927d40] [c0000000002d6720] do_vfs_ioctl+0x490/0x780 [c0000027d1927de0] [c0000000002d6ae4] SyS_ioctl+0xd4/0xf0 [c0000027d1927e30] [c000000000009358] syscall_exit+0x0/0x98 Instruction dump: 60000000 60420000 387e1b30 38800003 38a00001 38c00000 480087d9 e8410018 ebde1c98 7fbdf040 3bdee368 419e0048 <813e1b20> 939e1b18 2f890001 409effcc ---[ end trace 8cdf50251cca6680 ]--- Fixes: 25fedfca94cfbf2461314c6c34ef58e74a31b025 Signed-off-by: Paul Mackerras Reviewed-by: Alexander Graf Signed-off-by: Paolo Bonzini --- arch/powerpc/kvm/book3s_hv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 48d3c5d2ecc9..df81caab7383 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -1952,7 +1952,7 @@ static void post_guest_process(struct kvmppc_vcore *vc) */ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) { - struct kvm_vcpu *vcpu; + struct kvm_vcpu *vcpu, *vnext; int i; int srcu_idx; @@ -1982,7 +1982,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) */ if ((threads_per_core > 1) && ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) { - list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { + list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads, + arch.run_list) { vcpu->arch.ret = -EBUSY; kvmppc_remove_runnable(vc, vcpu); wake_up(&vcpu->arch.cpu_run); From dbfe8ef5599a5370abc441fcdbb382b656563eb4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 8 May 2015 15:23:55 -0400 Subject: [PATCH 412/652] ahci: avoton port-disable reset-quirk Avoton AHCI occasionally sees drive probe timeouts at driver load time. When this happens SCR_STATUS indicates device detected, but no D2H FIS reception. Reset the internal link state machines by bouncing port-enable in the PCS register when this occurs. Cc: Signed-off-by: Dan Williams Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 103 +++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 95 insertions(+), 8 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c7a92a743ed0..65ee94454bbd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -66,6 +66,7 @@ enum board_ids { board_ahci_yes_fbs, /* board IDs for specific chipsets in alphabetical order */ + board_ahci_avn, board_ahci_mcp65, board_ahci_mcp77, board_ahci_mcp89, @@ -84,6 +85,8 @@ enum board_ids { static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void ahci_mcp89_apple_enable(struct pci_dev *pdev); static bool is_mcp89_apple(struct pci_dev *pdev); static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, @@ -107,6 +110,11 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_avn_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_avn_hardreset, +}; + static const struct ata_port_info ahci_port_info[] = { /* by features */ [board_ahci] = { @@ -151,6 +159,12 @@ static const struct ata_port_info ahci_port_info[] = { .port_ops = &ahci_ops, }, /* by chipsets */ + [board_ahci_avn] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_avn_ops, + }, [board_ahci_mcp65] = { AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), @@ -290,14 +304,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f32), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f33), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f34), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f35), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f36), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f32), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f33), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f34), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f35), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f36), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */ @@ -670,6 +684,79 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, return rc; } +/* + * ahci_avn_hardreset - attempt more aggressive recovery of Avoton ports. + * + * It has been observed with some SSDs that the timing of events in the + * link synchronization phase can leave the port in a state that can not + * be recovered by a SATA-hard-reset alone. The failing signature is + * SStatus.DET stuck at 1 ("Device presence detected but Phy + * communication not established"). It was found that unloading and + * reloading the driver when this problem occurs allows the drive + * connection to be recovered (DET advanced to 0x3). The critical + * component of reloading the driver is that the port state machines are + * reset by bouncing "port enable" in the AHCI PCS configuration + * register. So, reproduce that effect by bouncing a port whenever we + * see DET==1 after a reset. + */ +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + unsigned long tmo = deadline - jiffies; + struct ata_taskfile tf; + bool online; + int rc, i; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + for (i = 0; i < 2; i++) { + u16 val; + u32 sstatus; + int port = ap->port_no; + struct ata_host *host = ap->host; + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + if (sata_scr_read(link, SCR_STATUS, &sstatus) != 0 || + (sstatus & 0xf) != 1) + break; + + ata_link_printk(link, KERN_INFO, "avn bounce port%d\n", + port); + + pci_read_config_word(pdev, 0x92, &val); + val &= ~(1 << port); + pci_write_config_word(pdev, 0x92, val); + ata_msleep(ap, 1000); + val |= 1 << port; + pci_write_config_word(pdev, 0x92, val); + deadline += tmo; + } + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + + #ifdef CONFIG_PM static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { From 8f9cfeed3eae86c70d3b04445a6f2036b27b6304 Mon Sep 17 00:00:00 2001 From: Pan Xinhui Date: Sat, 28 Mar 2015 10:42:56 +0800 Subject: [PATCH 413/652] tty/n_gsm.c: fix a memory leak when gsmtty is removed when gsmtty_remove put dlci, it will cause memory leak if dlci->port's refcount is zero. So we do the cleanup work in .cleanup callback instead. dlci will be last put in two call chains. 1) gsmld_close -> gsm_cleanup_mux -> gsm_dlci_release -> dlci_put 2) gsmld_remove -> dlci_put so there is a race. the memory leak depends on the race. In call chain 2. we hit the memory leak. below comment tells. release_tty -> tty_driver_remove_tty -> gsmtty_remove -> dlci_put -> tty_port_destructor (WARN_ON(port->itty) and return directly) | tty->port->itty = NULL; | tty_kref_put ---> release_one_tty -> gsmtty_cleanup (added by our patch) So our patch fix the memory leak by doing the cleanup work after tty core did. Signed-off-by: Pan Xinhui Fixes: dfabf7ffa30585 Cc: stable # 3.14+ Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 91abc00aa833..2c34c3249972 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -3170,7 +3170,7 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state) return gsmtty_modem_update(dlci, encode); } -static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty) +static void gsmtty_cleanup(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; struct gsm_mux *gsm = dlci->gsm; @@ -3178,7 +3178,6 @@ static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty) dlci_put(dlci); dlci_put(gsm->dlci[0]); mux_put(gsm); - driver->ttys[tty->index] = NULL; } /* Virtual ttys for the demux */ @@ -3199,7 +3198,7 @@ static const struct tty_operations gsmtty_ops = { .tiocmget = gsmtty_tiocmget, .tiocmset = gsmtty_tiocmset, .break_ctl = gsmtty_break_ctl, - .remove = gsmtty_remove, + .cleanup = gsmtty_cleanup, }; From 1a48632ffed61352a7810ce089dc5a8bcd505a60 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 13 Apr 2015 13:24:34 -0400 Subject: [PATCH 414/652] pty: Fix input race when closing A read() from a pty master may mistakenly indicate EOF (errno == -EIO) after the pty slave has closed, even though input data remains to be read. For example, pty slave | input worker | pty master | | | | n_tty_read() pty_write() | | input avail? no add data | | sleep schedule worker --->| | . |---> flush_to_ldisc() | . pty_close() | fill read buffer | . wait for worker | wakeup reader --->| . | read buffer full? |---> input avail ? yes |<--- yes - exit worker | copy 4096 bytes to user TTY_OTHER_CLOSED <---| |<--- kick worker | | **** New read() before worker starts **** | | n_tty_read() | | input avail? no | | TTY_OTHER_CLOSED? yes | | return -EIO Several conditions are required to trigger this race: 1. the ldisc read buffer must become full so the input worker exits 2. the read() count parameter must be >= 4096 so the ldisc read buffer is empty 3. the subsequent read() occurs before the kicked worker has processed more input However, the underlying cause of the race is that data is pipelined, while tty state is not; ie., data already written by the pty slave end is not yet visible to the pty master end, but state changes by the pty slave end are visible to the pty master end immediately. Pipeline the TTY_OTHER_CLOSED state through input worker to the reader. 1. Introduce TTY_OTHER_DONE which is set by the input worker when TTY_OTHER_CLOSED is set and either the input buffers are flushed or input processing has completed. Readers/polls are woken when TTY_OTHER_DONE is set. 2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED. 3. A new input worker is started from pty_close() after setting TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be set if the last input worker is already finished (or just about to exit). Remove tty_flush_to_ldisc(); no in-tree callers. Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311 BugLink: http://bugs.launchpad.net/bugs/1429756 Cc: # 3.19+ Reported-by: Andy Whitcroft Reported-by: H.J. Lu Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/tty.txt | 3 +++ drivers/tty/n_hdlc.c | 4 ++-- drivers/tty/n_tty.c | 22 +++++++++++++++---- drivers/tty/pty.c | 5 +++-- drivers/tty/tty_buffer.c | 41 ++++++++++++++++++++++++------------ include/linux/tty.h | 2 +- 6 files changed, 54 insertions(+), 23 deletions(-) diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt index 1e52d67d0abf..dbe6623fed1c 100644 --- a/Documentation/serial/tty.txt +++ b/Documentation/serial/tty.txt @@ -198,6 +198,9 @@ TTY_IO_ERROR If set, causes all subsequent userspace read/write TTY_OTHER_CLOSED Device is a pty and the other side has closed. +TTY_OTHER_DONE Device is a pty and the other side has closed and + all pending input processing has been completed. + TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into smaller chunks. diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 644ddb841d9f..bbc4ce66c2c1 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -600,7 +600,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, add_wait_queue(&tty->read_wait, &wait); for (;;) { - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { + if (test_bit(TTY_OTHER_DONE, &tty->flags)) { ret = -EIO; break; } @@ -828,7 +828,7 @@ static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, /* set bits for operations that won't block */ if (n_hdlc->rx_buf_list.head) mask |= POLLIN | POLLRDNORM; /* readable */ - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + if (test_bit(TTY_OTHER_DONE, &tty->flags)) mask |= POLLHUP; if (tty_hung_up_p(filp)) mask |= POLLHUP; diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index cf6e0f2e1331..cc57a3a6b02b 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1949,6 +1949,18 @@ static inline int input_available_p(struct tty_struct *tty, int poll) return ldata->commit_head - ldata->read_tail >= amt; } +static inline int check_other_done(struct tty_struct *tty) +{ + int done = test_bit(TTY_OTHER_DONE, &tty->flags); + if (done) { + /* paired with cmpxchg() in check_other_closed(); ensures + * read buffer head index is not stale + */ + smp_mb__after_atomic(); + } + return done; +} + /** * copy_from_read_buf - copy read data directly * @tty: terminal device @@ -2167,7 +2179,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, struct n_tty_data *ldata = tty->disc_data; unsigned char __user *b = buf; DEFINE_WAIT_FUNC(wait, woken_wake_function); - int c; + int c, done; int minimum, time; ssize_t retval = 0; long timeout; @@ -2235,8 +2247,10 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, ((minimum - (b - buf)) >= 1)) ldata->minimum_to_wake = (minimum - (b - buf)); + done = check_other_done(tty); + if (!input_available_p(tty, 0)) { - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { + if (done) { retval = -EIO; break; } @@ -2443,12 +2457,12 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, poll_wait(file, &tty->read_wait, wait); poll_wait(file, &tty->write_wait, wait); + if (check_other_done(tty)) + mask |= POLLHUP; if (input_available_p(tty, 1)) mask |= POLLIN | POLLRDNORM; if (tty->packet && tty->link->ctrl_status) mask |= POLLPRI | POLLIN | POLLRDNORM; - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) - mask |= POLLHUP; if (tty_hung_up_p(file)) mask |= POLLHUP; if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) { diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index e72ee629cead..4d5e8409769c 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -53,9 +53,8 @@ static void pty_close(struct tty_struct *tty, struct file *filp) /* Review - krefs on tty_link ?? */ if (!tty->link) return; - tty_flush_to_ldisc(tty->link); set_bit(TTY_OTHER_CLOSED, &tty->link->flags); - wake_up_interruptible(&tty->link->read_wait); + tty_flip_buffer_push(tty->link->port); wake_up_interruptible(&tty->link->write_wait); if (tty->driver->subtype == PTY_TYPE_MASTER) { set_bit(TTY_OTHER_CLOSED, &tty->flags); @@ -243,7 +242,9 @@ static int pty_open(struct tty_struct *tty, struct file *filp) goto out; clear_bit(TTY_IO_ERROR, &tty->flags); + /* TTY_OTHER_CLOSED must be cleared before TTY_OTHER_DONE */ clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); + clear_bit(TTY_OTHER_DONE, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); return 0; diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 75661641f5fe..2f78b77f0f81 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -37,6 +37,28 @@ #define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) +/* + * If all tty flip buffers have been processed by flush_to_ldisc() or + * dropped by tty_buffer_flush(), check if the linked pty has been closed. + * If so, wake the reader/poll to process + */ +static inline void check_other_closed(struct tty_struct *tty) +{ + unsigned long flags, old; + + /* transition from TTY_OTHER_CLOSED => TTY_OTHER_DONE must be atomic */ + for (flags = ACCESS_ONCE(tty->flags); + test_bit(TTY_OTHER_CLOSED, &flags); + ) { + old = flags; + __set_bit(TTY_OTHER_DONE, &flags); + flags = cmpxchg(&tty->flags, old, flags); + if (old == flags) { + wake_up_interruptible(&tty->read_wait); + break; + } + } +} /** * tty_buffer_lock_exclusive - gain exclusive access to buffer @@ -229,6 +251,8 @@ void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld) if (ld && ld->ops->flush_buffer) ld->ops->flush_buffer(tty); + check_other_closed(tty); + atomic_dec(&buf->priority); mutex_unlock(&buf->lock); } @@ -471,8 +495,10 @@ static void flush_to_ldisc(struct work_struct *work) smp_rmb(); count = head->commit - head->read; if (!count) { - if (next == NULL) + if (next == NULL) { + check_other_closed(tty); break; + } buf->head = next; tty_buffer_free(port, head); continue; @@ -488,19 +514,6 @@ static void flush_to_ldisc(struct work_struct *work) tty_ldisc_deref(disc); } -/** - * tty_flush_to_ldisc - * @tty: tty to push - * - * Push the terminal flip buffers to the line discipline. - * - * Must not be called from IRQ context. - */ -void tty_flush_to_ldisc(struct tty_struct *tty) -{ - flush_work(&tty->port->buf.work); -} - /** * tty_flip_buffer_push - terminal * @port: tty port to push diff --git a/include/linux/tty.h b/include/linux/tty.h index fe5623c9af71..d76631f615c2 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -339,6 +339,7 @@ struct tty_file_private { #define TTY_EXCLUSIVE 3 /* Exclusive open mode */ #define TTY_DEBUG 4 /* Debugging */ #define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */ +#define TTY_OTHER_DONE 6 /* Closed pty has completed input processing */ #define TTY_LDISC_OPEN 11 /* Line discipline is open */ #define TTY_PTY_LOCK 16 /* pty private */ #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ @@ -462,7 +463,6 @@ extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); extern void no_tty(void); -extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); extern void tty_buffer_init(struct tty_port *port); From fdb68e09bbb1c981f24608d7022c7d93cc47b326 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Tue, 7 Apr 2015 06:31:09 +0200 Subject: [PATCH 415/652] drm: Zero out invalid vblank timestamp in drm_update_vblank_count. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 844b03f27739135fe1fed2fef06da0ffc4c7a081 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by: Mario Kleiner Cc: #v3.17+ Cc: Ville Syrjälä Cc: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index c8a34476570a..af9662e58272 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -131,12 +131,11 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc) /* Reinitialize corresponding vblank timestamp if high-precision query * available. Skip this step if query unsupported or failed. Will - * reinitialize delayed at next vblank interrupt in that case. + * reinitialize delayed at next vblank interrupt in that case and + * assign 0 for now, to mark the vblanktimestamp as invalid. */ - if (rc) { - tslot = atomic_read(&vblank->count) + diff; - vblanktimestamp(dev, crtc, tslot) = t_vblank; - } + tslot = atomic_read(&vblank->count) + diff; + vblanktimestamp(dev, crtc, tslot) = rc ? t_vblank : (struct timeval) {0, 0}; smp_mb__before_atomic(); atomic_add(diff, &vblank->count); From 030bbdbf4c833bc69f502eae58498bc5572db736 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 10 May 2015 15:12:29 -0700 Subject: [PATCH 416/652] Linux 4.1-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 2da553fd7fc3..eae539d69bf3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Hurr durr I'ma sheep # *DOCUMENTATION* From 19fc99d0c6ba7d9b65456496b5bb2169d5f74cd0 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 6 May 2015 18:31:56 +0200 Subject: [PATCH 417/652] ARM: net fix emit_udiv() for BPF_ALU | BPF_DIV | BPF_K intruction. In that case, emit_udiv() will be called with rn == ARM_R0 (r_scratch) and loading rm first into ARM_R0 will result in jit_udiv() function being called the same dividend and divisor. Fix that by loading rn first into ARM_R1 and then rm into ARM_R0. Signed-off-by: Nicolas Schichan Cc: # v3.13+ Fixes: aee636c4809f (bpf: do not use reciprocal divide) Acked-by: Mircea Gherzan Signed-off-by: David S. Miller --- arch/arm/net/bpf_jit_32.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index e1268f905026..f412b53ed268 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -449,10 +449,21 @@ static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx) return; } #endif - if (rm != ARM_R0) - emit(ARM_MOV_R(ARM_R0, rm), ctx); + + /* + * For BPF_ALU | BPF_DIV | BPF_K instructions, rm is ARM_R4 + * (r_A) and rn is ARM_R0 (r_scratch) so load rn first into + * ARM_R1 to avoid accidentally overwriting ARM_R0 with rm + * before using it as a source for ARM_R1. + * + * For BPF_ALU | BPF_DIV | BPF_X rm is ARM_R4 (r_A) and rn is + * ARM_R5 (r_X) so there is no particular register overlap + * issues. + */ if (rn != ARM_R1) emit(ARM_MOV_R(ARM_R1, rn), ctx); + if (rm != ARM_R0) + emit(ARM_MOV_R(ARM_R0, rm), ctx); ctx->seen |= SEEN_CALL; emit_mov_i(ARM_R3, (u32)jit_udiv, ctx); From 0b59d8806a31bb0267b3a461e8fef20c727bdbf6 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 7 May 2015 17:14:21 +0200 Subject: [PATCH 418/652] ARM: net: delegate filter to kernel interpreter when imm_offset() return value can't fit into 12bits. The ARM JIT code emits "ldr rX, [pc, #offset]" to access the literal pool. #offset maximum value is 4095 and if the generated code is too large, the #offset value can overflow and not point to the expected slot in the literal pool. Additionally, when overflow occurs, bits of the overflow can end up changing the destination register of the ldr instruction. Fix that by detecting the overflow in imm_offset() and setting a flag that is checked for each BPF instructions converted in build_body(). As of now it can only be detected in the second pass. As a result the second build_body() call can now fail, so add the corresponding cleanup code in that case. Using multiple literal pools in the JITed code is going to require lots of intrusive changes to the JIT code (which would better be done as a feature instead of fix), just delegating to the kernel BPF interpreter in that case is a more straight forward, minimal fix and easy to backport. Fixes: ddecdfcea0ae ("ARM: 7259/3: net: JIT compiler for packet filters") Signed-off-by: Nicolas Schichan Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- arch/arm/net/bpf_jit_32.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index f412b53ed268..e0e23582c8b4 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -54,6 +54,7 @@ #define SEEN_DATA (1 << (BPF_MEMWORDS + 3)) #define FLAG_NEED_X_RESET (1 << 0) +#define FLAG_IMM_OVERFLOW (1 << 1) struct jit_ctx { const struct bpf_prog *skf; @@ -293,6 +294,15 @@ static u16 imm_offset(u32 k, struct jit_ctx *ctx) /* PC in ARM mode == address of the instruction + 8 */ imm = offset - (8 + ctx->idx * 4); + if (imm & ~0xfff) { + /* + * literal pool is too far, signal it into flags. we + * can only detect it on the second pass unfortunately. + */ + ctx->flags |= FLAG_IMM_OVERFLOW; + return 0; + } + return imm; } @@ -866,6 +876,14 @@ b_epilogue: default: return -1; } + + if (ctx->flags & FLAG_IMM_OVERFLOW) + /* + * this instruction generated an overflow when + * trying to access the literal pool, so + * delegate this filter to the kernel interpreter. + */ + return -1; } /* compute offsets only during the first pass */ @@ -928,7 +946,14 @@ void bpf_jit_compile(struct bpf_prog *fp) ctx.idx = 0; build_prologue(&ctx); - build_body(&ctx); + if (build_body(&ctx) < 0) { +#if __LINUX_ARM_ARCH__ < 7 + if (ctx.imm_count) + kfree(ctx.imms); +#endif + bpf_jit_binary_free(header); + goto out; + } build_epilogue(&ctx); flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx)); From cd9c39977754d9602b5783a44f4af09530a58254 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 7 May 2015 20:37:10 +0200 Subject: [PATCH 419/652] bnx2x: limit fw delay in kdump to 5s after boot Commit 12a8541d5c82 "bnx2x: Delay during kdump load" added a 5 seconds delay to bnx2x's probe function in the kdump case to let the firmware realize the old driver is gone. The problem with the delay is that it is per-device, so if you have several bnx2x NICs in NPAR mode, the delays can accumulate to minutes. Fix it by adjusting the delay so that we do not wait more than necessary, i.e. no more delaying after 5 seconds of kernel boot time. Signed-off-by: Michal Schmidt Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 556dcc162a62..fd52ce95127e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13371,8 +13371,13 @@ static int bnx2x_init_one(struct pci_dev *pdev, /* Management FW 'remembers' living interfaces. Allow it some time * to forget previously living interfaces, allowing a proper re-load. */ - if (is_kdump_kernel()) - msleep(5000); + if (is_kdump_kernel()) { + ktime_t now = ktime_get_boottime(); + ktime_t fw_ready_time = ktime_set(5, 0); + + if (ktime_before(now, fw_ready_time)) + msleep(ktime_ms_delta(fw_ready_time, now)); + } /* An estimated maximum supported CoS number according to the chip * version. From fbf33a2802f71dba06faa948af805884ff16a2ab Mon Sep 17 00:00:00 2001 From: "Kretschmer, Mathias" Date: Fri, 8 May 2015 15:44:37 +0200 Subject: [PATCH 420/652] af_packet / TX_RING not fully non-blocking (w/ MSG_DONTWAIT). This patch fixes an issue where the send(MSG_DONTWAIT) call on a TX_RING is not fully non-blocking in cases where the device's sndBuf is full. We pass nonblock=true to sock_alloc_send_skb() and return any possibly occuring error code (most likely EGAIN) to the caller. As the fast-path stays as it is, we keep the unlikely() around skb == NULL. Signed-off-by: Mathias Kretschmer Signed-off-by: David S. Miller --- net/packet/af_packet.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 5102c3cc4eec..b5989c6ee551 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2311,11 +2311,14 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) tlen = dev->needed_tailroom; skb = sock_alloc_send_skb(&po->sk, hlen + tlen + sizeof(struct sockaddr_ll), - 0, &err); + !need_wait, &err); - if (unlikely(skb == NULL)) + if (unlikely(skb == NULL)) { + /* we assume the socket was initially writeable ... */ + if (likely(len_sum > 0)) + err = len_sum; goto out_status; - + } tp_len = tpacket_fill_skb(po, skb, ph, dev, size_max, proto, addr, hlen); if (tp_len > dev->mtu + dev->hard_header_len) { From 7c0c82682873354490a5b67c77331bd65a356236 Mon Sep 17 00:00:00 2001 From: Bert Vermeulen Date: Fri, 8 May 2015 16:18:49 +0200 Subject: [PATCH 421/652] net: mdio-gpio: Allow for unspecified bus id When the bus id was supplied via a struct platform_device, the driver wasn't handling -1 to mean an unspecified id of the only instance of this driver, as the platform spec requires. Signed-off-by: Bert Vermeulen Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index c9cb486c753d..53d18150f4e2 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -168,7 +168,10 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, if (!new_bus->irq[i]) new_bus->irq[i] = PHY_POLL; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); + if (bus_id != -1) + snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); + else + strncpy(new_bus->id, "gpio", MII_BUS_ID_SIZE); if (devm_gpio_request(dev, bitbang->mdc, "mdc")) goto out_free_bus; From b4f006db5a72d9c14920d3eeeccd5082cf1169af Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 10 May 2015 12:42:06 +0530 Subject: [PATCH 422/652] ARC: With earlycon in use, retire EARLY_PRINTK Signed-off-by: Vineet Gupta --- arch/arc/Kconfig.debug | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug index a7fc0da25650..ff6a4b5ce927 100644 --- a/arch/arc/Kconfig.debug +++ b/arch/arc/Kconfig.debug @@ -2,19 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config EARLY_PRINTK - bool "Early printk" if EMBEDDED - default y - help - Write kernel log output directly into the VGA buffer or to a serial - port. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. For normal operation - it is not recommended because it looks ugly and doesn't cooperate - with klogd/syslogd or the X server. You should normally N here, - unless you want to debug such a crash. - config 16KSTACKS bool "Use 16Kb for kernel stacks instead of 8Kb" help From 4a8a224570ada27196a2529df9e3dd345239b286 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 11 May 2015 11:21:41 +0530 Subject: [PATCH 423/652] ARC: inline cache flush toggle helpers Signed-off-by: Vineet Gupta --- arch/arc/mm/cache_arc700.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 8c3a3e02ba92..12b2100db073 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -266,7 +266,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, * Machine specific helpers for Entire D-Cache or Per Line ops */ -static unsigned int __before_dc_op(const int op) +static inline unsigned int __before_dc_op(const int op) { unsigned int reg = reg; @@ -284,7 +284,7 @@ static unsigned int __before_dc_op(const int op) return reg; } -static void __after_dc_op(const int op, unsigned int reg) +static inline void __after_dc_op(const int op, unsigned int reg) { if (op & OP_FLUSH) /* flush / flush-n-inv both wait */ while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS); From ef7254a595912b026d80a4116b8c4cd5b79d9c62 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 11 May 2015 10:15:50 +0200 Subject: [PATCH 424/652] x86/vdso: Fix 'make bzImage' on older distros Change HOST_EXTRACFLAGS to include arch/x86/include/uapi along with include/uapi. This looks more consistent, and this fixes "make bzImage" on my old distro which doesn't have asm/bitsperlong.h in /usr/include/. Signed-off-by: Oleg Nesterov Signed-off-by: Borislav Petkov Acked-by: Andy Lutomirski Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rusty Russell Cc: Thomas Gleixner Fixes: 6f121e548f83 ("x86, vdso: Reimplement vdso.so preparation in build-time C") Link: http://lkml.kernel.org/r/1431332153-18566-6-git-send-email-bp@alien8.de Link: http://lkml.kernel.org/r/20150507165835.GB18652@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/vdso/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index 275a3a8b78af..e97032069f88 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -51,7 +51,7 @@ VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \ $(obj)/vdso64.so.dbg: $(src)/vdso.lds $(vobjs) FORCE $(call if_changed,vdso) -HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi +HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/x86/include/uapi hostprogs-y += vdso2c quiet_cmd_vdso2c = VDSO2C $@ From 44b11fee51711ca85aa2b121a49bf029d18a3722 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Thu, 23 Apr 2015 09:07:09 +0200 Subject: [PATCH 425/652] perf/x86/rapl: Enable Broadwell-U RAPL support This patch enables RAPL counters (energy consumption counters) support for Intel Broadwell-U processors (Model 61): To use: $ perf stat -a -I 1000 -e power/energy-cores/,power/energy-pkg/,power/energy-ram/ sleep 10 Signed-off-by: Stephane Eranian Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Thomas Gleixner Cc: jacob.jun.pan@linux.intel.com Cc: kan.liang@intel.com Cc: peterz@infradead.org Cc: sonnyrao@chromium.org Link: http://lkml.kernel.org/r/20150423070709.GA4970@thinkpad Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_rapl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/perf_event_intel_rapl.c b/arch/x86/kernel/cpu/perf_event_intel_rapl.c index 999289b94025..358c54ad20d4 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_rapl.c +++ b/arch/x86/kernel/cpu/perf_event_intel_rapl.c @@ -722,6 +722,7 @@ static int __init rapl_pmu_init(void) break; case 60: /* Haswell */ case 69: /* Haswell-Celeron */ + case 61: /* Broadwell */ rapl_cntr_mask = RAPL_IDX_HSW; rapl_pmu_events_group.attrs = rapl_events_hsw_attr; break; From 9b5a4e395c2f39fae89f75e4a749be5dba342d22 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 11 May 2015 14:04:14 +0200 Subject: [PATCH 426/652] ALSA: hda - Add headset mic quirk for Dell Inspiron 5548 This enables the headset microphone on Dell Inspiron 5548, or at least some variants of it. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1452175 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4a0a238c9864..37c2c9f91df0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5346,6 +5346,13 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x17, 0x40000000}, {0x1d, 0x40700001}, {0x21, 0x02211050}), + SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell Inspiron 5548", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, + ALC255_STANDARD_PINS, + {0x12, 0x90a60180}, + {0x14, 0x90170130}, + {0x17, 0x40000000}, + {0x1d, 0x40700001}, + {0x21, 0x02211040}), SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, ALC256_STANDARD_PINS, {0x13, 0x40000000}), From 47b4e1fc4972cc43a19121bc2608a60aef3bf216 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Mon, 11 May 2015 11:31:15 +0200 Subject: [PATCH 427/652] mac80211: move WEP tailroom size check Remove checking tailroom when adding IV as it uses only headroom, and move the check to the ICV generation that actually needs the tailroom. In other case I hit such warning and datapath don't work, when testing: - IBSS + WEP - ath9k with hw crypt enabled - IPv6 data (ping6) WARNING: CPU: 3 PID: 13301 at net/mac80211/wep.c:102 ieee80211_wep_add_iv+0x129/0x190 [mac80211]() [...] Call Trace: [] dump_stack+0x45/0x57 [] warn_slowpath_common+0x8a/0xc0 [] warn_slowpath_null+0x1a/0x20 [] ieee80211_wep_add_iv+0x129/0x190 [mac80211] [] ieee80211_crypto_wep_encrypt+0x6b/0xd0 [mac80211] [] invoke_tx_handlers+0xc51/0xf30 [mac80211] [...] Cc: stable@vger.kernel.org Signed-off-by: Janusz Dziedzic Signed-off-by: Johannes Berg --- net/mac80211/wep.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index a4220e92f0cc..efa3f48f1ec5 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -98,8 +98,7 @@ static u8 *ieee80211_wep_add_iv(struct ieee80211_local *local, hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); - if (WARN_ON(skb_tailroom(skb) < IEEE80211_WEP_ICV_LEN || - skb_headroom(skb) < IEEE80211_WEP_IV_LEN)) + if (WARN_ON(skb_headroom(skb) < IEEE80211_WEP_IV_LEN)) return NULL; hdrlen = ieee80211_hdrlen(hdr->frame_control); @@ -167,6 +166,9 @@ int ieee80211_wep_encrypt(struct ieee80211_local *local, size_t len; u8 rc4key[3 + WLAN_KEY_LEN_WEP104]; + if (WARN_ON(skb_tailroom(skb) < IEEE80211_WEP_ICV_LEN)) + return -1; + iv = ieee80211_wep_add_iv(local, skb, keylen, keyidx); if (!iv) return -1; From ba0a1ff85376811d3ca789fb4848fef55390d095 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 4 May 2015 23:04:15 +0200 Subject: [PATCH 428/652] ARM: dove: Add clock-names to CuBox Si5351 clk generator Si5351 clock generator on CuBox uses XTAL as clock reference, name the clock phandle accordingly. Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/dove-cubox.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index aae7efc09b0b..e6fa251e17b9 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -87,6 +87,7 @@ /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; From 364aece01a2dd748fc36a1e8bf52ef639b0857bd Mon Sep 17 00:00:00 2001 From: Peter Antoine Date: Mon, 11 May 2015 08:50:45 +0100 Subject: [PATCH 429/652] drm/i915: Avoid GPU hang when coming out of s3 or s4 This patch fixes a timing issue that causes a GPU hang when the system comes out of power saving. During pm_resume, We are submitting batchbuffers before enabling Interrupts this is causing us to miss the context switch interrupt, and in consequence intel_execlists_handle_ctx_events is not triggered. This patch is based on a patch from Deepak S from another platform. The patch fixes an issue introduced by: commit e7778be1eab918274f79603d7c17b3ec8be77386 drm/i915: Fix startup failure in LRC mode after recent init changes The above patch added a call to init_context() to fix an issue introduced by a previous patch. But, it then opened up a small timing window for the batches being added by the init_context (basically setting up the context) to complete before the interrupts have been turned on, thus hanging the GPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89600 Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Peter Antoine Reviewed-by: Daniel Vetter [Jani: fixed typo in subject, massaged the comments a bit] Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index c302ffb5a168..a19d2c71e205 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -699,6 +699,16 @@ static int i915_drm_resume(struct drm_device *dev) intel_init_pch_refclk(dev); drm_mode_config_reset(dev); + /* + * Interrupts have to be enabled before any batches are run. If not the + * GPU will hang. i915_gem_init_hw() will initiate batches to + * update/restore the context. + * + * Modeset enabling in intel_modeset_init_hw() also needs working + * interrupts. + */ + intel_runtime_pm_enable_interrupts(dev_priv); + mutex_lock(&dev->struct_mutex); if (i915_gem_init_hw(dev)) { DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n"); @@ -706,9 +716,6 @@ static int i915_drm_resume(struct drm_device *dev) } mutex_unlock(&dev->struct_mutex); - /* We need working interrupts for modeset enabling ... */ - intel_runtime_pm_enable_interrupts(dev_priv); - intel_modeset_init_hw(dev); spin_lock_irq(&dev_priv->irq_lock); From e43699d4b4c5d9ecbcb5998cdcbada060981171f Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 5 May 2015 15:21:27 +0100 Subject: [PATCH 430/652] Btrfs: fix crash after inode cache writeback failure If the writeback of an inode cache failed we were unnecessarilly attempting to release again the delalloc metadata that we previously reserved. However attempting to do this a second time triggers an assertion at drop_outstanding_extent() because we have no more outstanding extents for our inode cache's inode. If we were able to start writeback of the cache the reserved metadata space is released at btrfs_finished_ordered_io(), even if an error happens during writeback. So make sure we don't repeat the metadata space release if writeback started for our inode cache. This issue was trivial to reproduce by running the fstest btrfs/088 with "-o inode_cache", which triggered the assertion leading to a BUG() call and requiring a reboot in order to run the remaining fstests. Trace produced by btrfs/088: [255289.385904] BTRFS: assertion failed: BTRFS_I(inode)->outstanding_extents >= num_extents, file: fs/btrfs/extent-tree.c, line: 5276 [255289.388094] ------------[ cut here ]------------ [255289.389184] kernel BUG at fs/btrfs/ctree.h:4057! [255289.390125] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC (...) [255289.392068] Call Trace: [255289.392068] [] drop_outstanding_extent+0x3d/0x6d [btrfs] [255289.392068] [] btrfs_delalloc_release_metadata+0x54/0xe3 [btrfs] [255289.392068] [] btrfs_write_out_ino_cache+0x95/0xad [btrfs] [255289.392068] [] btrfs_save_ino_cache+0x275/0x2dc [btrfs] [255289.392068] [] commit_fs_roots.isra.12+0xaa/0x137 [btrfs] [255289.392068] [] ? trace_hardirqs_on+0xd/0xf [255289.392068] [] ? btrfs_commit_transaction+0x4b1/0x9c9 [btrfs] [255289.392068] [] ? _raw_spin_unlock+0x32/0x46 [255289.392068] [] btrfs_commit_transaction+0x4c0/0x9c9 [btrfs] (...) Signed-off-by: Filipe Manana Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 5e020d76fd07..9dbe5b548fa6 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -3466,6 +3466,7 @@ int btrfs_write_out_ino_cache(struct btrfs_root *root, struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; int ret; struct btrfs_io_ctl io_ctl; + bool release_metadata = true; if (!btrfs_test_opt(root, INODE_MAP_CACHE)) return 0; @@ -3473,11 +3474,20 @@ int btrfs_write_out_ino_cache(struct btrfs_root *root, memset(&io_ctl, 0, sizeof(io_ctl)); ret = __btrfs_write_out_cache(root, inode, ctl, NULL, &io_ctl, trans, path, 0); - if (!ret) + if (!ret) { + /* + * At this point writepages() didn't error out, so our metadata + * reservation is released when the writeback finishes, at + * inode.c:btrfs_finish_ordered_io(), regardless of it finishing + * with or without an error. + */ + release_metadata = false; ret = btrfs_wait_cache_io(root, trans, NULL, &io_ctl, path, 0); + } if (ret) { - btrfs_delalloc_release_metadata(inode, inode->i_size); + if (release_metadata) + btrfs_delalloc_release_metadata(inode, inode->i_size); #ifdef DEBUG btrfs_err(root->fs_info, "failed to write free ino cache for root %llu", From 28aeeac1dd3080db5108b7b446be69f05c470a90 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 5 May 2015 19:03:10 +0100 Subject: [PATCH 431/652] Btrfs: fix panic when starting bg cache writeout after IO error When waiting for the writeback of block group cache we returned immediately if there was an error during writeback without waiting for the ordered extent to complete. This left a short time window where if some other task attempts to start the writeout for the same block group cache it can attempt to add a new ordered extent, starting at the same offset (0) before the previous one is removed from the ordered tree, causing an ordered tree panic (calls BUG()). This normally doesn't happen in other write paths, such as buffered writes or direct IO writes for regular files, since before marking page ranges dirty we lock the ranges and wait for any ordered extents within the range to complete first. Fix this by making btrfs_wait_ordered_range() not return immediately if it gets an error from the writeback, waiting for all ordered extents to complete first. This issue happened often when running the fstest btrfs/088 and it's easy to trigger it by running in a loop until the panic happens: for ((i = 1; i <= 10000; i++)) do ./check btrfs/088 ; done [17156.862573] BTRFS critical (device sdc): panic in ordered_data_tree_panic:70: Inconsistency in ordered tree at offset 0 (errno=-17 Object already exists) [17156.864052] ------------[ cut here ]------------ [17156.864052] kernel BUG at fs/btrfs/ordered-data.c:70! (...) [17156.864052] Call Trace: [17156.864052] [] btrfs_add_ordered_extent+0x12/0x14 [btrfs] [17156.864052] [] run_delalloc_nocow+0x5bf/0x747 [btrfs] [17156.864052] [] run_delalloc_range+0x95/0x353 [btrfs] [17156.864052] [] writepage_delalloc.isra.16+0xb9/0x13f [btrfs] [17156.864052] [] __extent_writepage+0x129/0x1f7 [btrfs] [17156.864052] [] extent_write_cache_pages.isra.15.constprop.28+0x231/0x2f4 [btrfs] [17156.864052] [] ? __module_text_address+0x12/0x59 [17156.864052] [] ? trace_hardirqs_on+0xd/0xf [17156.864052] [] extent_writepages+0x4b/0x5c [btrfs] [17156.864052] [] ? kmem_cache_free+0x9b/0xce [17156.864052] [] ? btrfs_submit_direct+0x3fc/0x3fc [btrfs] [17156.864052] [] ? free_extent_state+0x8c/0xc1 [btrfs] [17156.864052] [] btrfs_writepages+0x28/0x2a [btrfs] [17156.864052] [] do_writepages+0x23/0x2c [17156.864052] [] __filemap_fdatawrite_range+0x5a/0x61 [17156.864052] [] filemap_fdatawrite_range+0x13/0x15 [17156.864052] [] btrfs_fdatawrite_range+0x21/0x48 [btrfs] [17156.864052] [] __btrfs_write_out_cache.isra.14+0x2d9/0x3a7 [btrfs] [17156.864052] [] ? btrfs_write_out_cache+0x41/0xdc [btrfs] [17156.864052] [] btrfs_write_out_cache+0x93/0xdc [btrfs] [17156.864052] [] ? btrfs_start_dirty_block_groups+0x13a/0x2b2 [btrfs] [17156.864052] [] btrfs_start_dirty_block_groups+0x1d9/0x2b2 [btrfs] [17156.864052] [] ? trace_hardirqs_on+0xd/0xf [17156.864052] [] btrfs_commit_transaction+0x130/0x9c9 [btrfs] [17156.864052] [] btrfs_sync_fs+0xe1/0x12d [btrfs] Signed-off-by: Filipe Manana Signed-off-by: Chris Mason --- fs/btrfs/ordered-data.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 157cc54fc634..760c4a5e096b 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -722,6 +722,7 @@ void btrfs_start_ordered_extent(struct inode *inode, int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len) { int ret = 0; + int ret_wb = 0; u64 end; u64 orig_end; struct btrfs_ordered_extent *ordered; @@ -741,9 +742,14 @@ int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len) if (ret) return ret; - ret = filemap_fdatawait_range(inode->i_mapping, start, orig_end); - if (ret) - return ret; + /* + * If we have a writeback error don't return immediately. Wait first + * for any ordered extents that haven't completed yet. This is to make + * sure no one can dirty the same page ranges and call writepages() + * before the ordered extents complete - to avoid failures (-EEXIST) + * when adding the new ordered extents to the ordered tree. + */ + ret_wb = filemap_fdatawait_range(inode->i_mapping, start, orig_end); end = orig_end; while (1) { @@ -767,7 +773,7 @@ int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len) break; end--; } - return ret; + return ret_wb ? ret_wb : ret; } /* From ff1f8250a9e47c1032eb5c86ababff461a11f3a0 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 6 May 2015 16:15:09 +0100 Subject: [PATCH 432/652] Btrfs: fix race between block group creation and their cache writeout So creating a block group has 2 distinct phases: Phase 1 - creates the btrfs_block_group_cache item and adds it to the rbtree fs_info->block_group_cache_tree and to the corresponding list space_info->block_groups[]; Phase 2 - adds the block group item to the extent tree and corresponding items to the chunk tree. The first phase adds the block_group_cache_item to a list of pending block groups in the transaction handle, and phase 2 happens when btrfs_end_transaction() is called against the transaction handle. It happens that once phase 1 completes, other concurrent tasks that use their own transaction handle, but points to the same running transaction (struct btrfs_trans_handle->transaction), can use this block group for space allocations and therefore mark it dirty. Dirty block groups are tracked in a list belonging to the currently running transaction (struct btrfs_transaction) and not in the transaction handle (btrfs_trans_handle). This is a problem because once a task calls btrfs_commit_transaction(), it calls btrfs_start_dirty_block_groups() which will see all dirty block groups and attempt to start their writeout, including those that are still attached to the transaction handle of some concurrent task that hasn't called btrfs_end_transaction() yet - which means those block groups haven't gone through phase 2 yet and therefore when write_one_cache_group() is called, it won't find the block group items in the extent tree and abort the current transaction with -ENOENT, turning the fs into readonly mode and require a remount. Fix this by ignoring -ENOENT when looking for block group items in the extent tree when we attempt to start the writeout of the block group caches outside the critical section of the transaction commit. We will try again later during the critical section and if there we still don't find the block group item in the extent tree, we then abort the current transaction. This issue happened twice, once while running fstests btrfs/067 and once for btrfs/078, which produced the following trace: [ 3278.703014] WARNING: CPU: 7 PID: 18499 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]() [ 3278.707329] BTRFS: Transaction aborted (error -2) (...) [ 3278.731555] Call Trace: [ 3278.732396] [] dump_stack+0x4f/0x7b [ 3278.733860] [] ? console_unlock+0x361/0x3ad [ 3278.735312] [] warn_slowpath_common+0xa1/0xbb [ 3278.736874] [] ? __btrfs_abort_transaction+0x52/0x114 [btrfs] [ 3278.738302] [] warn_slowpath_fmt+0x46/0x48 [ 3278.739520] [] __btrfs_abort_transaction+0x52/0x114 [btrfs] [ 3278.741222] [] write_one_cache_group+0xae/0xbf [btrfs] [ 3278.742797] [] btrfs_start_dirty_block_groups+0x170/0x2b2 [btrfs] [ 3278.744492] [] btrfs_commit_transaction+0x130/0x9c9 [btrfs] [ 3278.746084] [] ? trace_hardirqs_on+0xd/0xf [ 3278.747249] [] btrfs_sync_file+0x313/0x387 [btrfs] [ 3278.748744] [] vfs_fsync_range+0x95/0xa4 [ 3278.749958] [] ? ret_from_sys_call+0x1d/0x58 [ 3278.751218] [] vfs_fsync+0x1c/0x1e [ 3278.754197] [] do_fsync+0x34/0x4e [ 3278.755192] [] SyS_fsync+0x10/0x14 [ 3278.756236] [] system_call_fastpath+0x12/0x17 [ 3278.757366] ---[ end trace 9a4d4df4969709aa ]--- Fixes: 1bbc621ef284 ("Btrfs: allow block group cache writeout outside critical section in commit") Signed-off-by: Filipe Manana Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 0ec8e228b89f..7effed6f2fa6 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3180,8 +3180,6 @@ static int write_one_cache_group(struct btrfs_trans_handle *trans, btrfs_mark_buffer_dirty(leaf); fail: btrfs_release_path(path); - if (ret) - btrfs_abort_transaction(trans, root, ret); return ret; } @@ -3487,8 +3485,30 @@ again: ret = 0; } } - if (!ret) + if (!ret) { ret = write_one_cache_group(trans, root, path, cache); + /* + * Our block group might still be attached to the list + * of new block groups in the transaction handle of some + * other task (struct btrfs_trans_handle->new_bgs). This + * means its block group item isn't yet in the extent + * tree. If this happens ignore the error, as we will + * try again later in the critical section of the + * transaction commit. + */ + if (ret == -ENOENT) { + ret = 0; + spin_lock(&cur_trans->dirty_bgs_lock); + if (list_empty(&cache->dirty_list)) { + list_add_tail(&cache->dirty_list, + &cur_trans->dirty_bgs); + btrfs_get_block_group(cache); + } + spin_unlock(&cur_trans->dirty_bgs_lock); + } else if (ret) { + btrfs_abort_transaction(trans, root, ret); + } + } /* if its not on the io list, we need to put the block group */ if (should_put) @@ -3597,8 +3617,11 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans, ret = 0; } } - if (!ret) + if (!ret) { ret = write_one_cache_group(trans, root, path, cache); + if (ret) + btrfs_abort_transaction(trans, root, ret); + } /* if its not on the io list, we need to put the block group */ if (should_put) From 062c19e9dd692b8a78e3532f71c290520a2ab437 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 23 Apr 2015 11:28:48 +0100 Subject: [PATCH 433/652] Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON There's a race between releasing extent buffers that are flagged as stale and recycling them that makes us it the following BUG_ON at btrfs_release_extent_buffer_page: BUG_ON(extent_buffer_under_io(eb)) The BUG_ON is triggered because the extent buffer has the flag EXTENT_BUFFER_DIRTY set as a consequence of having been reused and made dirty by another concurrent task. Here follows a sequence of steps that leads to the BUG_ON. CPU 0 CPU 1 CPU 2 path->nodes[0] == eb X X->refs == 2 (1 for the tree, 1 for the path) btrfs_header_generation(X) == current trans id flag EXTENT_BUFFER_DIRTY set on X btrfs_release_path(path) unlocks X reads eb X X->refs incremented to 3 locks eb X btrfs_del_items(X) X becomes empty clean_tree_block(X) clear EXTENT_BUFFER_DIRTY from X btrfs_del_leaf(X) unlocks X extent_buffer_get(X) X->refs incremented to 4 btrfs_free_tree_block(X) X's range is not pinned X's range added to free space cache free_extent_buffer_stale(X) lock X->refs_lock set EXTENT_BUFFER_STALE on X release_extent_buffer(X) X->refs decremented to 3 unlocks X->refs_lock btrfs_release_path() unlocks X free_extent_buffer(X) X->refs becomes 2 __btrfs_cow_block(Y) btrfs_alloc_tree_block() btrfs_reserve_extent() find_free_extent() gets offset == X->start btrfs_init_new_buffer(X->start) btrfs_find_create_tree_block(X->start) alloc_extent_buffer(X->start) find_extent_buffer(X->start) finds eb X in radix tree free_extent_buffer(X) lock X->refs_lock test X->refs == 2 test bit EXTENT_BUFFER_STALE is set test !extent_buffer_under_io(eb) increments X->refs to 3 mark_extent_buffer_accessed(X) check_buffer_tree_ref(X) --> does nothing, X->refs >= 2 and EXTENT_BUFFER_TREE_REF is set in X clear EXTENT_BUFFER_STALE from X locks X btrfs_mark_buffer_dirty() set_extent_buffer_dirty(X) check_buffer_tree_ref(X) --> does nothing, X->refs >= 2 and EXTENT_BUFFER_TREE_REF is set sets EXTENT_BUFFER_DIRTY on X test and clear EXTENT_BUFFER_TREE_REF decrements X->refs to 2 release_extent_buffer(X) decrements X->refs to 1 unlock X->refs_lock unlock X free_extent_buffer(X) lock X->refs_lock release_extent_buffer(X) decrements X->refs to 0 btrfs_release_extent_buffer_page(X) BUG_ON(extent_buffer_under_io(X)) --> EXTENT_BUFFER_DIRTY set on X Fix this by making find_extent buffer wait for any ongoing task currently executing free_extent_buffer()/free_extent_buffer_stale() if the extent buffer has the stale flag set. A more clean alternative would be to always increment the extent buffer's reference count while holding its refs_lock spinlock but find_extent_buffer is a performance critical area and that would cause lock contention whenever multiple tasks search for the same extent buffer concurrently. A build server running a SLES 12 kernel (3.12 kernel + over 450 upstream btrfs patches backported from newer kernels) was hitting this often: [1212302.461948] kernel BUG at ../fs/btrfs/extent_io.c:4507! (...) [1212302.470219] CPU: 1 PID: 19259 Comm: bs_sched Not tainted 3.12.36-38-default #1 [1212302.540792] Hardware name: Supermicro PDSM4/PDSM4, BIOS 6.00 04/17/2006 [1212302.540792] task: ffff8800e07e0100 ti: ffff8800d6412000 task.ti: ffff8800d6412000 [1212302.540792] RIP: 0010:[] [] btrfs_release_extent_buffer_page.constprop.51+0x101/0x110 [btrfs] (...) [1212302.630008] Call Trace: [1212302.630008] [] release_extent_buffer+0x3d/0xa0 [btrfs] [1212302.630008] [] btrfs_release_path+0x1d/0xa0 [btrfs] [1212302.630008] [] read_block_for_search.isra.33+0x13e/0x3a0 [btrfs] [1212302.630008] [] btrfs_search_slot+0x3f4/0xa80 [btrfs] [1212302.630008] [] lookup_inline_extent_backref+0xf8/0x630 [btrfs] [1212302.630008] [] __btrfs_free_extent+0x11d/0xc40 [btrfs] [1212302.630008] [] __btrfs_run_delayed_refs+0x394/0x11d0 [btrfs] [1212302.630008] [] btrfs_run_delayed_refs.part.66+0x69/0x280 [btrfs] [1212302.630008] [] __btrfs_end_transaction+0x2ad/0x3d0 [btrfs] [1212302.630008] [] btrfs_evict_inode+0x4a5/0x500 [btrfs] [1212302.630008] [] evict+0xa8/0x190 [1212302.630008] [] do_unlinkat+0x1a0/0x2b0 I was also able to reproduce this on a 3.19 kernel, corresponding to Chris' integration branch from about a month ago, running the following stress test on a qemu/kvm guest (with 4 virtual cpus and 16Gb of ram): while true; do mkfs.btrfs -l 4096 -f -b `expr 20 \* 1024 \* 1024 \* 1024` /dev/sdd mount /dev/sdd /mnt snapshot_cmd="btrfs subvolume snapshot -r /mnt" snapshot_cmd="$snapshot_cmd /mnt/snap_\`date +'%H_%M_%S_%N'\`" fsstress -d /mnt -n 25000 -p 8 -x "$snapshot_cmd" -X 100 umount /mnt done Which usually triggers the BUG_ON within less than 24 hours: [49558.618097] ------------[ cut here ]------------ [49558.619732] kernel BUG at fs/btrfs/extent_io.c:4551! (...) [49558.620031] CPU: 3 PID: 23908 Comm: fsstress Tainted: G W 3.19.0-btrfs-next-7+ #3 [49558.620031] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [49558.620031] task: ffff8800319fc0d0 ti: ffff880220da8000 task.ti: ffff880220da8000 [49558.620031] RIP: 0010:[] [] btrfs_release_extent_buffer_page+0x20/0xe9 [btrfs] (...) [49558.620031] Call Trace: [49558.620031] [] release_extent_buffer+0x90/0xd3 [btrfs] [49558.620031] [] ? _raw_spin_lock+0x3b/0x43 [49558.620031] [] ? free_extent_buffer+0x37/0x94 [btrfs] [49558.620031] [] free_extent_buffer+0x90/0x94 [btrfs] [49558.620031] [] btrfs_release_path+0x4a/0x69 [btrfs] [49558.620031] [] __btrfs_free_extent+0x778/0x80c [btrfs] [49558.620031] [] __btrfs_run_delayed_refs+0xad2/0xc62 [btrfs] [49558.728054] [] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18 [49558.728054] [] btrfs_run_delayed_refs+0x6d/0x1ba [btrfs] [49558.728054] [] ? join_transaction.isra.9+0xb9/0x36b [btrfs] [49558.728054] [] btrfs_commit_transaction+0x4c/0x981 [btrfs] [49558.728054] [] btrfs_sync_fs+0xd5/0x10d [btrfs] [49558.728054] [] ? iterate_supers+0x60/0xc4 [49558.728054] [] ? do_sync_work+0x91/0x91 [49558.728054] [] sync_fs_one_sb+0x20/0x22 [49558.728054] [] iterate_supers+0x76/0xc4 [49558.728054] [] sys_sync+0x55/0x83 [49558.728054] [] system_call_fastpath+0x12/0x17 Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 43af5a61ad25..c32d226bfecc 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4772,6 +4772,25 @@ struct extent_buffer *find_extent_buffer(struct btrfs_fs_info *fs_info, start >> PAGE_CACHE_SHIFT); if (eb && atomic_inc_not_zero(&eb->refs)) { rcu_read_unlock(); + /* + * Lock our eb's refs_lock to avoid races with + * free_extent_buffer. When we get our eb it might be flagged + * with EXTENT_BUFFER_STALE and another task running + * free_extent_buffer might have seen that flag set, + * eb->refs == 2, that the buffer isn't under IO (dirty and + * writeback flags not set) and it's still in the tree (flag + * EXTENT_BUFFER_TREE_REF set), therefore being in the process + * of decrementing the extent buffer's reference count twice. + * So here we could race and increment the eb's reference count, + * clear its stale flag, mark it as dirty and drop our reference + * before the other task finishes executing free_extent_buffer, + * which would later result in an attempt to free an extent + * buffer that is dirty. + */ + if (test_bit(EXTENT_BUFFER_STALE, &eb->bflags)) { + spin_lock(&eb->refs_lock); + spin_unlock(&eb->refs_lock); + } mark_extent_buffer_accessed(eb, NULL); return eb; } From 268be0f7a7d9b3644bcb99568efba13cb208b627 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 9 May 2015 07:58:09 +0000 Subject: [PATCH 434/652] net: qca_spi: Fix possible race during probe Registering the netdev before setting the priv data is unsafe. So fix this possible race by setting the priv data first. Signed-off-by: Stefan Wahren Cc: # v3.18+ Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index f66641d961e3..6af028d5f9bc 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -912,6 +912,8 @@ qca_spi_probe(struct spi_device *spi_device) qca->spi_dev = spi_device; qca->legacy_mode = legacy_mode; + spi_set_drvdata(spi_device, qcaspi_devs); + mac = of_get_mac_address(spi_device->dev.of_node); if (mac) @@ -944,8 +946,6 @@ qca_spi_probe(struct spi_device *spi_device) return -EFAULT; } - spi_set_drvdata(spi_device, qcaspi_devs); - qcaspi_init_device_debugfs(qca); return 0; From 7cbeed9bce7580479bb97457dad220cb3594b875 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Thu, 7 May 2015 16:20:15 +0800 Subject: [PATCH 435/652] KVM: MMU: fix smap permission check Current permission check assumes that RSVD bit in PFEC is always zero, however, it is not true since MMIO #PF will use it to quickly identify MMIO access Fix it by clearing the bit if walking guest page table is needed Signed-off-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu.h | 2 ++ arch/x86/kvm/paging_tmpl.h | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index c7d65637c851..06eb2fc1bab8 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -166,6 +166,8 @@ static inline bool permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, int index = (pfec >> 1) + (smap >> (X86_EFLAGS_AC_BIT - PFERR_RSVD_BIT + 1)); + WARN_ON(pfec & PFERR_RSVD_MASK); + return (mmu->permissions[index] >> pte_access) & 1; } diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index fd49c867b25a..6e6d115fe9b5 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -718,6 +718,13 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code, mmu_is_nested(vcpu)); if (likely(r != RET_MMIO_PF_INVALID)) return r; + + /* + * page fault with PFEC.RSVD = 1 is caused by shadow + * page fault, should not be used to walk guest page + * table. + */ + error_code &= ~PFERR_RSVD_MASK; }; r = mmu_topup_memory_caches(vcpu); From 898761158be7682082955e3efa4ad24725305fc7 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 2 Apr 2015 11:04:05 +0200 Subject: [PATCH 436/652] KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages should not be reused for different values of it. Thus, it has to be added to the mask in kvm_mmu_pte_write. Reviewed-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index d43867c33bc4..209fe1477465 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4238,7 +4238,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, ++vcpu->kvm->stat.mmu_pte_write; kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE); - mask.cr0_wp = mask.cr4_pae = mask.nxe = 1; + mask.cr0_wp = mask.cr4_pae = mask.nxe = mask.smep_andnot_wp = 1; for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) { if (detect_write_misaligned(sp, gpa, bytes) || detect_write_flooding(sp)) { From 0be0226f07d14b153a5eedf2bb86e1eb7dcefab5 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Mon, 11 May 2015 22:55:21 +0800 Subject: [PATCH 437/652] KVM: MMU: fix SMAP virtualization KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- Documentation/virtual/kvm/mmu.txt | 18 ++++++++++++++---- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu.c | 16 ++++++++++++---- arch/x86/kvm/mmu.h | 2 -- arch/x86/kvm/x86.c | 8 +++----- 5 files changed, 30 insertions(+), 15 deletions(-) diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index 53838d9c6295..c59bd9bc41ef 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -169,6 +169,10 @@ Shadow pages contain the following information: Contains the value of cr4.smep && !cr0.wp for which the page is valid (pages for which this is true are different from other pages; see the treatment of cr0.wp=0 below). + role.smap_andnot_wp: + Contains the value of cr4.smap && !cr0.wp for which the page is valid + (pages for which this is true are different from other pages; see the + treatment of cr0.wp=0 below). gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. @@ -344,10 +348,16 @@ on fault type: (user write faults generate a #PF) -In the first case there is an additional complication if CR4.SMEP is -enabled: since we've turned the page into a kernel page, the kernel may now -execute it. We handle this by also setting spte.nx. If we get a user -fetch or read fault, we'll change spte.u=1 and spte.nx=gpte.nx back. +In the first case there are two additional complications: +- if CR4.SMEP is enabled: since we've turned the page into a kernel page, + the kernel may now execute it. We handle this by also setting spte.nx. + If we get a user fetch or read fault, we'll change spte.u=1 and + spte.nx=gpte.nx back. +- if CR4.SMAP is disabled: since the page has been changed to a kernel + page, it can not be reused when CR4.SMAP is enabled. We set + CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note, + here we do not care the case that CR4.SMAP is enabled since KVM will + directly inject #PF to guest due to failed permission check. To prevent an spte that was converted into a kernel page with cr0.wp=0 from being written by the kernel after cr0.wp has changed to 1, we make diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index dea2e7e962e3..e61c3a4ee131 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -207,6 +207,7 @@ union kvm_mmu_page_role { unsigned nxe:1; unsigned cr0_wp:1; unsigned smep_andnot_wp:1; + unsigned smap_andnot_wp:1; }; }; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 209fe1477465..44a7d2515497 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3736,8 +3736,8 @@ static void reset_rsvds_bits_mask_ept(struct kvm_vcpu *vcpu, } } -void update_permission_bitmask(struct kvm_vcpu *vcpu, - struct kvm_mmu *mmu, bool ept) +static void update_permission_bitmask(struct kvm_vcpu *vcpu, + struct kvm_mmu *mmu, bool ept) { unsigned bit, byte, pfec; u8 map; @@ -3918,6 +3918,7 @@ static void init_kvm_tdp_mmu(struct kvm_vcpu *vcpu) void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu) { bool smep = kvm_read_cr4_bits(vcpu, X86_CR4_SMEP); + bool smap = kvm_read_cr4_bits(vcpu, X86_CR4_SMAP); struct kvm_mmu *context = &vcpu->arch.mmu; MMU_WARN_ON(VALID_PAGE(context->root_hpa)); @@ -3936,6 +3937,8 @@ void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu) context->base_role.cr0_wp = is_write_protection(vcpu); context->base_role.smep_andnot_wp = smep && !is_write_protection(vcpu); + context->base_role.smap_andnot_wp + = smap && !is_write_protection(vcpu); } EXPORT_SYMBOL_GPL(kvm_init_shadow_mmu); @@ -4207,12 +4210,18 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, const u8 *new, int bytes) { gfn_t gfn = gpa >> PAGE_SHIFT; - union kvm_mmu_page_role mask = { .word = 0 }; struct kvm_mmu_page *sp; LIST_HEAD(invalid_list); u64 entry, gentry, *spte; int npte; bool remote_flush, local_flush, zap_page; + union kvm_mmu_page_role mask = (union kvm_mmu_page_role) { + .cr0_wp = 1, + .cr4_pae = 1, + .nxe = 1, + .smep_andnot_wp = 1, + .smap_andnot_wp = 1, + }; /* * If we don't have indirect shadow pages, it means no page is @@ -4238,7 +4247,6 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, ++vcpu->kvm->stat.mmu_pte_write; kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE); - mask.cr0_wp = mask.cr4_pae = mask.nxe = mask.smep_andnot_wp = 1; for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) { if (detect_write_misaligned(sp, gpa, bytes) || detect_write_flooding(sp)) { diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index 06eb2fc1bab8..0ada65ecddcf 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -71,8 +71,6 @@ enum { int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct); void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu); void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly); -void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, - bool ept); static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm) { diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c73efcd03e29..986b3f5d0523 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -702,8 +702,9 @@ EXPORT_SYMBOL_GPL(kvm_set_xcr); int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { unsigned long old_cr4 = kvm_read_cr4(vcpu); - unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | - X86_CR4_PAE | X86_CR4_SMEP; + unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE | + X86_CR4_SMEP | X86_CR4_SMAP; + if (cr4 & CR4_RESERVED_BITS) return 1; @@ -744,9 +745,6 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) (!(cr4 & X86_CR4_PCIDE) && (old_cr4 & X86_CR4_PCIDE))) kvm_mmu_reset_context(vcpu); - if ((cr4 ^ old_cr4) & X86_CR4_SMAP) - update_permission_bitmask(vcpu, vcpu->arch.walk_mmu, false); - if ((cr4 ^ old_cr4) & X86_CR4_OSXSAVE) kvm_update_cpuid(vcpu); From 5dc5616ee850eaba055bb469a6c4a471d489140e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 May 2015 17:44:22 +0100 Subject: [PATCH 438/652] iommu/arm-smmu: Fix sign-extension of upstream bus addresses at stage 1 Stage 1 translation is controlled by two sets of page tables (TTBR0 and TTBR1) which grow up and down from zero respectively in the ARMv8 translation regime. For the SMMU, we only care about TTBR0 and, in the case of a 48-bit virtual space, we expect to map virtual addresses 0x0 through to 0xffff_ffff_ffff. Given that some masters may be incapable of emitting virtual addresses targetting TTBR1 (e.g. because they sit on a 48-bit bus), the SMMU architecture allows bit 47 to be sign-extended, halving the virtual range of TTBR0 but allowing TTBR1 to be used. This is controlled by the SEP field in TTBCR2. The SMMU driver incorrectly enables this sign-extension feature, which causes problems when userspace addresses are programmed into a master device with the SMMU expecting to map the incoming transactions via TTBR0; if the top bit of address is set, we will instead get a translation fault since TTBR1 walks are disabled in the TTBCR. This patch fixes the issue by disabling sign-extension of a fixed virtual address bit and instead basing the behaviour on the upstream bus size: the incoming address is zero extended unless the upstream bus is only 49 bits wide, in which case bit 48 is used as the sign bit and is replicated to the upper bits. Cc: # v4.0+ Reported-by: Varun Sethi Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 30 ++---------------------------- 1 file changed, 2 insertions(+), 28 deletions(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 9f7e1d34a32b..66a803b9dd3a 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -224,14 +224,7 @@ #define RESUME_TERMINATE (1 << 0) #define TTBCR2_SEP_SHIFT 15 -#define TTBCR2_SEP_MASK 0x7 - -#define TTBCR2_ADDR_32 0 -#define TTBCR2_ADDR_36 1 -#define TTBCR2_ADDR_40 2 -#define TTBCR2_ADDR_42 3 -#define TTBCR2_ADDR_44 4 -#define TTBCR2_ADDR_48 5 +#define TTBCR2_SEP_UPSTREAM (0x7 << TTBCR2_SEP_SHIFT) #define TTBRn_HI_ASID_SHIFT 16 @@ -793,26 +786,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain, writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBCR); if (smmu->version > ARM_SMMU_V1) { reg = pgtbl_cfg->arm_lpae_s1_cfg.tcr >> 32; - switch (smmu->va_size) { - case 32: - reg |= (TTBCR2_ADDR_32 << TTBCR2_SEP_SHIFT); - break; - case 36: - reg |= (TTBCR2_ADDR_36 << TTBCR2_SEP_SHIFT); - break; - case 40: - reg |= (TTBCR2_ADDR_40 << TTBCR2_SEP_SHIFT); - break; - case 42: - reg |= (TTBCR2_ADDR_42 << TTBCR2_SEP_SHIFT); - break; - case 44: - reg |= (TTBCR2_ADDR_44 << TTBCR2_SEP_SHIFT); - break; - case 48: - reg |= (TTBCR2_ADDR_48 << TTBCR2_SEP_SHIFT); - break; - } + reg |= TTBCR2_SEP_UPSTREAM; writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBCR2); } } else { From 665a6cd809f43eec2b51413816a4178a3390a870 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 9 May 2015 23:08:38 +0200 Subject: [PATCH 439/652] pppoe: drop pppoe device in pppoe_unbind_sock_work After receiving a PADT and the socket is closed, user space will no longer drop the reference to the pppoe device. This leads to errors like this: [ 488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2 Fixes: 287f3a943fe ("pppoe: Use workqueue to die properly when a PADT is received") Signed-off-by: Felix Fietkau Signed-off-by: David S. Miller --- drivers/net/ppp/pppoe.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index aa1dd926623a..b62a5e3a1c65 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -465,6 +465,10 @@ static void pppoe_unbind_sock_work(struct work_struct *work) struct sock *sk = sk_pppox(po); lock_sock(sk); + if (po->pppoe_dev) { + dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; + } pppox_unbind_sock(sk); release_sock(sk); sock_put(sk); From 145a42b3a964c6647464f05bd58aa33787de7f75 Mon Sep 17 00:00:00 2001 From: David Ward Date: Sat, 9 May 2015 22:01:47 -0400 Subject: [PATCH 440/652] net_sched: gred: use correct backlog value in WRED mode In WRED mode, the backlog for a single virtual queue (VQ) should not be used to determine queue behavior; instead the backlog is summed across all VQs. This sum is currently used when calculating the average queue lengths. It also needs to be used when determining if the queue's hard limit has been reached, or when reporting each VQ's backlog via netlink. q->backlog will only be used if the queue switches out of WRED mode. Signed-off-by: David Ward Signed-off-by: David S. Miller --- net/sched/sch_gred.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index a4ca4517cdc8..634529e0ce6b 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -229,7 +229,7 @@ static int gred_enqueue(struct sk_buff *skb, struct Qdisc *sch) break; } - if (q->backlog + qdisc_pkt_len(skb) <= q->limit) { + if (gred_backlog(t, q, sch) + qdisc_pkt_len(skb) <= q->limit) { q->backlog += qdisc_pkt_len(skb); return qdisc_enqueue_tail(skb, sch); } @@ -553,7 +553,7 @@ static int gred_dump(struct Qdisc *sch, struct sk_buff *skb) opt.limit = q->limit; opt.DP = q->DP; - opt.backlog = q->backlog; + opt.backlog = gred_backlog(table, q, sch); opt.prio = q->prio; opt.qth_min = q->parms.qth_min >> q->parms.Wlog; opt.qth_max = q->parms.qth_max >> q->parms.Wlog; From b0897972edfa42b4af5c3189b2b7a7fac5867828 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 11 May 2015 13:18:19 -0700 Subject: [PATCH 441/652] ARM: OMAP2+: Remove bogus struct clk comparison for timer clock With recent changes to use determine_rate, the comparison of two clocks won't work without clk_is_match that does __clk_get_hw on the clocks first. As we've been unconditionally already calling clk_set_parent already because of the bogus comparison, let's just remove the check as suggested by Stephen Boyd . Cc: Michael Turquette Cc: Paul Walmsley Cc: Tero Kristo Cc: Tomeu Vizoso Acked-by: Stephen Boyd Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index cef67af9e9b8..cac46d852da1 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -298,14 +298,11 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(src)) return PTR_ERR(src); - if (clk_get_parent(timer->fclk) != src) { - r = clk_set_parent(timer->fclk, src); - if (r < 0) { - pr_warn("%s: %s cannot set source\n", __func__, - oh->name); - clk_put(src); - return r; - } + r = clk_set_parent(timer->fclk, src); + if (r < 0) { + pr_warn("%s: %s cannot set source\n", __func__, oh->name); + clk_put(src); + return r; } clk_put(src); From 94634e9861abbc3036d7041773971c8e31ec2680 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 11 May 2015 16:38:02 +0200 Subject: [PATCH 442/652] IB/ehca: use correct destination for memcpy Using an element of a struct as the address for the memcpy of the whole struct may introduce a buffer overflow and does not help readability either simply pass the real thing as first argument to memcpy. Reported-by: Dan Carpenter Signed-off-by: Nicholas Mc Guire Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ehca/ehca_mcast.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_mcast.c b/drivers/infiniband/hw/ehca/ehca_mcast.c index 120aedf9f989..cec181532924 100644 --- a/drivers/infiniband/hw/ehca/ehca_mcast.c +++ b/drivers/infiniband/hw/ehca/ehca_mcast.c @@ -77,7 +77,7 @@ int ehca_attach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) return -EINVAL; } - memcpy(&my_gid.raw, gid->raw, sizeof(union ib_gid)); + memcpy(&my_gid, gid->raw, sizeof(union ib_gid)); subnet_prefix = be64_to_cpu(my_gid.global.subnet_prefix); interface_id = be64_to_cpu(my_gid.global.interface_id); @@ -114,7 +114,7 @@ int ehca_detach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) return -EINVAL; } - memcpy(&my_gid.raw, gid->raw, sizeof(union ib_gid)); + memcpy(&my_gid, gid->raw, sizeof(union ib_gid)); subnet_prefix = be64_to_cpu(my_gid.global.subnet_prefix); interface_id = be64_to_cpu(my_gid.global.interface_id); From 940fd304d233534038365f56d30c29ed7fd7416b Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 7 May 2015 16:34:23 -0500 Subject: [PATCH 443/652] iw_cxgb4: use wildcard mapping for getting remote addr info For listening endpoints bound to the wildcard address, we need to pass the wildcard address mapping to iwpm_get_remote_info() instead of the mapped address of the new child connection. Without this fix, and with iwarp port mapping enabled, each iw_cxgb4 connection that is spawned from a listening endpoint bound to the wildcard address, will generate an annoying dmesg entry about failing to find the remote address mapping info, and the connection state displayed in debugfs under /sys/kernel/debug/iw_cxgb4//eps will not have the peer's address/port mapping info. The connection still works though. Fixes: 5b6b8fe ("RDMA/cxgb4: Report the actual address of the remote connecting peer") Signed-off-by: Steve Wise Reviewed-by: Tatyana Nikolova Reviewed-by: Jason Gunthorpe Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index bb95a6c0477b..3ad8dc798f52 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -583,18 +583,18 @@ static void c4iw_record_pm_msg(struct c4iw_ep *ep, sizeof(ep->com.mapped_remote_addr)); } -static int get_remote_addr(struct c4iw_ep *ep) +static int get_remote_addr(struct c4iw_ep *parent_ep, struct c4iw_ep *child_ep) { int ret; - print_addr(&ep->com, __func__, "get_remote_addr"); + print_addr(&parent_ep->com, __func__, "get_remote_addr parent_ep "); + print_addr(&child_ep->com, __func__, "get_remote_addr child_ep "); - ret = iwpm_get_remote_info(&ep->com.mapped_local_addr, - &ep->com.mapped_remote_addr, - &ep->com.remote_addr, RDMA_NL_C4IW); + ret = iwpm_get_remote_info(&parent_ep->com.mapped_local_addr, + &child_ep->com.mapped_remote_addr, + &child_ep->com.remote_addr, RDMA_NL_C4IW); if (ret) - pr_info(MOD "Unable to find remote peer addr info - err %d\n", - ret); + PDBG("Unable to find remote peer addr info - err %d\n", ret); return ret; } @@ -2420,7 +2420,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) } memcpy(&child_ep->com.remote_addr, &child_ep->com.mapped_remote_addr, sizeof(child_ep->com.remote_addr)); - get_remote_addr(child_ep); + get_remote_addr(parent_ep, child_ep); c4iw_get_ep(&parent_ep->com); child_ep->parent_ep = parent_ep; From 13bd817bb88499ce1dc1dfdaffcde17fa492aca5 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 11 May 2015 11:56:01 +0530 Subject: [PATCH 444/652] powerpc/thp: Serialize pmd clear against a linux page table walk. Serialize against find_linux_pte_or_hugepte() which does lock-less lookup in page tables with local interrupts disabled. For huge pages it casts pmd_t to pte_t. Since the format of pte_t is different from pmd_t we want to prevent transit from pmd pointing to page table to pmd pointing to huge page (and back) while interrupts are disabled. We clear pmd to possibly replace it with page table pointer in different code paths. So make sure we wait for the parallel find_linux_pte_or_hugepage() to finish. Without this patch, a find_linux_pte_or_hugepte() running in parallel to __split_huge_zero_page_pmd() or do_huge_pmd_wp_page_fallback() or zap_huge_pmd() can run into the above issue. With __split_huge_zero_page_pmd() and do_huge_pmd_wp_page_fallback() we clear the hugepage pte before inserting the pmd entry with a regular pgtable address. Such a clear need to wait for the parallel find_linux_pte_or_hugepte() to finish. With zap_huge_pmd(), we can run into issues, with a hugepage pte getting zapped due to a MADV_DONTNEED while other cpu fault it in as small pages. Reported-by: Kirill A. Shutemov Signed-off-by: Aneesh Kumar K.V Reviewed-by: Kirill A. Shutemov Signed-off-by: Michael Ellerman --- arch/powerpc/mm/pgtable_64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 59daa5eeec25..6bfadf1aa5cb 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -839,6 +839,17 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm, * hash fault look at them. */ memset(pgtable, 0, PTE_FRAG_SIZE); + /* + * Serialize against find_linux_pte_or_hugepte which does lock-less + * lookup in page tables with local interrupts disabled. For huge pages + * it casts pmd_t to pte_t. Since format of pte_t is different from + * pmd_t we want to prevent transit from pmd pointing to page table + * to pmd pointing to huge page (and back) while interrupts are disabled. + * We clear pmd to possibly replace it with page table pointer in + * different code paths. So make sure we wait for the parallel + * find_linux_pte_or_hugepage to finish. + */ + kick_all_cpus_sync(); return old_pmd; } From 2936ae04aa5d7ebfd9921e363a8e8686f8bb5936 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Mon, 11 May 2015 21:03:36 -0400 Subject: [PATCH 445/652] MAINTAINERS: update the official rdma git repo Linus prefers kernel.org repos to github repos for security. Signed-off-by: Doug Ledford --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 40c14f14204d..c1911a7adb4f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5048,7 +5048,7 @@ M: Hal Rosenstock L: linux-rdma@vger.kernel.org W: http://www.openfabrics.org/ Q: http://patchwork.kernel.org/project/linux-rdma/list/ -T: git git://github.com/dledford/linux.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ From 7b868e81be38d5ad4f4aa4be819a5fa543cc5ee8 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 11 May 2015 11:58:29 +0530 Subject: [PATCH 446/652] powerpc/mm: Return NULL for not present hugetlb page We need to check whether pte is present in follow_huge_addr() and properly return NULL if mapping is not present. Also use READ_ONCE when dereferencing pte_t address. Without this patch, we may wrongly return a zero pfn page in follow_huge_addr(). Reviewed-by: David Gibson Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/mm/hugetlbpage.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 0ce968b00b7c..3385e3d0506e 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -689,27 +689,34 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { - pte_t *ptep; - struct page *page; + pte_t *ptep, pte; unsigned shift; unsigned long mask, flags; + struct page *page = ERR_PTR(-EINVAL); + + local_irq_save(flags); + ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift); + if (!ptep) + goto no_page; + pte = READ_ONCE(*ptep); /* + * Verify it is a huge page else bail. * Transparent hugepages are handled by generic code. We can skip them * here. */ - local_irq_save(flags); - ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift); + if (!shift || pmd_trans_huge(__pmd(pte_val(pte)))) + goto no_page; - /* Verify it is a huge page else bail. */ - if (!ptep || !shift || pmd_trans_huge(*(pmd_t *)ptep)) { - local_irq_restore(flags); - return ERR_PTR(-EINVAL); + if (!pte_present(pte)) { + page = NULL; + goto no_page; } mask = (1UL << shift) - 1; - page = pte_page(*ptep); + page = pte_page(pte); if (page) page += (address & mask) / PAGE_SIZE; +no_page: local_irq_restore(flags); return page; } From cafb45b2562baa57cb58bef0636c073705954cc4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 12 May 2015 06:43:04 +0200 Subject: [PATCH 447/652] MIPS: SMP: Fix build error. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC arch/mips/kernel/smp.o arch/mips/kernel/smp.c: In function ‘start_secondary’: arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(cpu, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’: arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(0, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘__cpu_up’: arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] while (!cpumask_test_cpu(cpu, &cpu_callin_map)) ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask) ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/smp.o] Error 1 make[1]: *** [arch/mips/kernel] Error 2 make: *** [arch/mips] Error 2 Signed-off-by: Ralf Baechle --- arch/mips/include/asm/smp.h | 2 +- arch/mips/kernel/smp.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index bb02fac9b4fa..2b25d1ba1ea0 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -45,7 +45,7 @@ extern int __cpu_logical_map[NR_CPUS]; #define SMP_DUMP 0x8 #define SMP_ASK_C0COUNT 0x10 -extern volatile cpumask_t cpu_callin_map; +extern cpumask_t cpu_callin_map; /* Mask of CPUs which are currently definitely operating coherently */ extern cpumask_t cpu_coherent_mask; diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 193ace7955fb..faa46ebd9dda 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -43,7 +43,7 @@ #include #include -volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ +cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ int __cpu_number_map[NR_CPUS]; /* Map physical to logical */ EXPORT_SYMBOL(__cpu_number_map); @@ -218,8 +218,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle) /* * Trust is futile. We should really have timeouts ... */ - while (!cpumask_test_cpu(cpu, &cpu_callin_map)) + while (!cpumask_test_cpu(cpu, &cpu_callin_map)) { udelay(100); + schedule(); + } synchronise_count_master(cpu); return 0; From ffb2d78eca08a1451137583d4e435aecfd6af809 Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Tue, 12 May 2015 13:23:59 +1000 Subject: [PATCH 448/652] powerpc/mce: fix off by one errors in mce event handling Before 69111bac42f5 ("powerpc: Replace __get_cpu_var uses"), in save_mce_event, index got the value of mce_nest_count, and mce_nest_count was incremented *after* index was set. However, that patch changed the behaviour so that mce_nest count was incremented *before* setting index. This causes an off-by-one error, as get_mce_event sets index as mce_nest_count - 1 before reading mce_event. Thus get_mce_event reads bogus data, causing warnings like "Machine Check Exception, Unknown event version 0 !" and breaking MCEs handling. Restore the old behaviour and unbreak MCE handling by subtracting one from the newly incremented value. The same broken change occured in machine_check_queue_event (which set a queue read by machine_check_process_queued_event). Fix that too, unbreaking printing of MCE information. Fixes: 69111bac42f5 ("powerpc: Replace __get_cpu_var uses") CC: stable@vger.kernel.org CC: Mahesh Salgaonkar CC: Christoph Lameter Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/mce.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c index 15c99b649b04..b2eb4686bd8f 100644 --- a/arch/powerpc/kernel/mce.c +++ b/arch/powerpc/kernel/mce.c @@ -73,7 +73,7 @@ void save_mce_event(struct pt_regs *regs, long handled, uint64_t nip, uint64_t addr) { uint64_t srr1; - int index = __this_cpu_inc_return(mce_nest_count); + int index = __this_cpu_inc_return(mce_nest_count) - 1; struct machine_check_event *mce = this_cpu_ptr(&mce_event[index]); /* @@ -184,7 +184,7 @@ void machine_check_queue_event(void) if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) return; - index = __this_cpu_inc_return(mce_queue_count); + index = __this_cpu_inc_return(mce_queue_count) - 1; /* If queue is full, just return for now. */ if (index >= MAX_MC_EVT) { __this_cpu_dec(mce_queue_count); From 2d94e5224e81c58986a8cf44a3bf4830ce5cb96e Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 7 May 2015 14:26:34 -0700 Subject: [PATCH 449/652] HID: hid-sensor-hub: Fix debug lock warning When CONFIG_DEBUG_LOCK_ALLOC is defined, mutex magic is compared and warned for (l->magic != l), here l is the address of mutex pointer. In hid-sensor-hub as part of hsdev creation, a per hsdev mutex is initialized during MFD cell creation. This hsdev, which contains, mutex is part of platform data for the a cell. But platform_data is copied in platform_device_add_data() in platform.c. This copy will copy the whole hsdev structure including mutex. But once copied the magic will no longer match. So when client driver call sensor_hub_input_attr_get_raw_value, this will trigger mutex warning. So to avoid this allocate mutex dynamically. This will be same even after copy. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 13 ++++++++++--- include/linux/hid-sensor-hub.h | 4 ++-- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index c3f6f1e311ea..090a1ba0abb6 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -294,7 +294,7 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, if (!report) return -EINVAL; - mutex_lock(&hsdev->mutex); + mutex_lock(hsdev->mutex_ptr); if (flag == SENSOR_HUB_SYNC) { memset(&hsdev->pending, 0, sizeof(hsdev->pending)); init_completion(&hsdev->pending.ready); @@ -328,7 +328,7 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, kfree(hsdev->pending.raw_data); hsdev->pending.status = false; } - mutex_unlock(&hsdev->mutex); + mutex_unlock(hsdev->mutex_ptr); return ret_val; } @@ -667,7 +667,14 @@ static int sensor_hub_probe(struct hid_device *hdev, hsdev->vendor_id = hdev->vendor; hsdev->product_id = hdev->product; hsdev->usage = collection->usage; - mutex_init(&hsdev->mutex); + hsdev->mutex_ptr = devm_kzalloc(&hdev->dev, + sizeof(struct mutex), + GFP_KERNEL); + if (!hsdev->mutex_ptr) { + ret = -ENOMEM; + goto err_stop_hw; + } + mutex_init(hsdev->mutex_ptr); hsdev->start_collection_index = i; if (last_hsdev) last_hsdev->end_collection_index = i; diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index 0408421d885f..0042bf330b99 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -74,7 +74,7 @@ struct sensor_hub_pending { * @usage: Usage id for this hub device instance. * @start_collection_index: Starting index for a phy type collection * @end_collection_index: Last index for a phy type collection - * @mutex: synchronizing mutex. + * @mutex_ptr: synchronizing mutex pointer. * @pending: Holds information of pending sync read request. */ struct hid_sensor_hub_device { @@ -84,7 +84,7 @@ struct hid_sensor_hub_device { u32 usage; int start_collection_index; int end_collection_index; - struct mutex mutex; + struct mutex *mutex_ptr; struct sensor_hub_pending pending; }; From 607d48063512707a414e346972e2210dc71ab491 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 12 May 2015 14:56:17 +0200 Subject: [PATCH 450/652] drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mapping range is inclusive between starting and ending addresses. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 4 ++-- drivers/gpu/drm/radeon/evergreen.c | 2 +- drivers/gpu/drm/radeon/ni.c | 5 +++-- drivers/gpu/drm/radeon/r600.c | 2 +- drivers/gpu/drm/radeon/rv770.c | 2 +- drivers/gpu/drm/radeon/si.c | 4 ++-- 6 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 28faea9996f9..a0c35bbc8546 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -5822,7 +5822,7 @@ static int cik_pcie_gart_enable(struct radeon_device *rdev) L2_CACHE_BIGK_FRAGMENT_SIZE(4)); /* setup context0 */ WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR, (u32)(rdev->dummy_page.addr >> 12)); @@ -5837,7 +5837,7 @@ static int cik_pcie_gart_enable(struct radeon_device *rdev) /* restore context1-15 */ /* set vm size, must be a multiple of 4 */ WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0); - WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn); + WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn - 1); for (i = 1; i < 16; i++) { if (i < 8) WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index f848acfd3fc8..05e6d6ef5963 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2485,7 +2485,7 @@ static int evergreen_pcie_gart_enable(struct radeon_device *rdev) WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp); WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp); WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) | RANGE_PROTECTION_FAULT_ENABLE_DEFAULT); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index e8a496ff007e..aba2f428c0a8 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1282,7 +1282,7 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) L2_CACHE_BIGK_FRAGMENT_SIZE(6)); /* setup context0 */ WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR, (u32)(rdev->dummy_page.addr >> 12)); @@ -1301,7 +1301,8 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) */ for (i = 1; i < 8; i++) { WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (i << 2), 0); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), rdev->vm_manager.max_pfn); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), + rdev->vm_manager.max_pfn - 1); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), rdev->vm_manager.saved_table_addr[i]); } diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 8f6d862a1882..25b4ac967742 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1112,7 +1112,7 @@ static int r600_pcie_gart_enable(struct radeon_device *rdev) WREG32(MC_VM_L1_TLB_MCB_RD_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE); WREG32(MC_VM_L1_TLB_MCB_WR_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE); WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) | RANGE_PROTECTION_FAULT_ENABLE_DEFAULT); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 01ee96acb398..c54d6313a46d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -921,7 +921,7 @@ static int rv770_pcie_gart_enable(struct radeon_device *rdev) WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp); WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp); WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) | RANGE_PROTECTION_FAULT_ENABLE_DEFAULT); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index b1d74bc375d8..5326f753e107 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -4303,7 +4303,7 @@ static int si_pcie_gart_enable(struct radeon_device *rdev) L2_CACHE_BIGK_FRAGMENT_SIZE(4)); /* setup context0 */ WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR, (u32)(rdev->dummy_page.addr >> 12)); @@ -4318,7 +4318,7 @@ static int si_pcie_gart_enable(struct radeon_device *rdev) /* empty context1-15 */ /* set vm size, must be a multiple of 4 */ WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0); - WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn); + WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn - 1); /* Assign the pt base to something valid for now; the pts used for * the VMs are determined by the application and setup and assigned * on the fly in the vm part of radeon_gart.c From b60e23ba25fe2112751834280964fef8ffd89fad Mon Sep 17 00:00:00 2001 From: Hans Ulli Kroll Date: Thu, 7 May 2015 19:29:03 +0200 Subject: [PATCH 451/652] ARM: Gemini: Maintainers update Back in business. New place for my repo on github Signed-off-by: Hans Ulli Kroll Signed-off-by: Arnd Bergmann --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 590304b96b03..f0d922bcc39f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -974,7 +974,7 @@ S: Maintained ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE M: Hans Ulli Kroll L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -T: git git://git.berlios.de/gemini-board +T: git git://github.com/ulli-kroll/linux.git S: Maintained F: arch/arm/mach-gemini/ From 3bb1555c0d2df5b84da12d2b639aa89c45d141aa Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 7 May 2015 15:45:02 +0100 Subject: [PATCH 452/652] ARM64: juno: add sp810 support and fix sp804 clock frequency The clock generator in IOFPGA generates the two source clocks: 32kHz and 1MHz for the SP810 System Controller. The SP810 System Controller selects 32kHz or 1MHz as the sources for TIM_CLK[3:0], the SP804 timer clocks. The powerup default is 32kHz but the maximum of "refclk" and "timclk" is chosen by the SP810 driver. This patch adds support for SP810 system controller and also fixes the SP804 timer clock frequency. However the SP804 driver needs to be enabled on ARM64 to test this, which requires SP804 driver to be moved out of arch/arm. Fixes: 71f867ec130e ("arm64: Add Juno board device tree.") Cc: Catalin Marinas Cc: Will Deacon Cc: Arnd Bergmann Cc: Olof Johansson Acked-by: Liviu Dudau Signed-off-by: Sudeep Holla Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 31 ++++++++++++++++--- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index c138b95a8356..351c95bda89e 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -21,6 +21,20 @@ clock-output-names = "juno_mb:clk25mhz"; }; + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "juno_mb:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "juno_mb:refclk32khz"; + }; + motherboard { compatible = "arm,vexpress,v2p-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ @@ -66,6 +80,15 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + mmci@050000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; @@ -106,16 +129,16 @@ compatible = "arm,sp804", "arm,primecell"; reg = <0x110000 0x10000>; interrupts = <9>; - clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; - clock-names = "timclken1", "apb_pclk"; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x10000>; interrupts = <9>; - clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; - clock-names = "timclken1", "apb_pclk"; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; rtc@170000 { From 2004f98acf95d4f3da46c41409cdbf0bdeb7e796 Mon Sep 17 00:00:00 2001 From: Robert Schwebel Date: Thu, 7 May 2015 15:45:03 +0100 Subject: [PATCH 453/652] ARM: vexpress/ca9: Add unified-cache property to l2 cache node Commit d9d1f3e2d711 ("ARM: l2c: check that DT files specify the required "cache-unified" property") mandates to specify this required property. Without this property, we get this boot warning: "L2C: device tree omits to specify unified cache" This patch adds "cache-unified" property to L2 cache node in vexpress CA9 device tree. Signed-off-by: Robert Schwebel Acked-by: Sudeep Holla Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/vexpress-v2p-ca9.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 23662b5a5e9d..a411274e8b6b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -170,6 +170,7 @@ compatible = "arm,pl310-cache"; reg = <0x1e00a000 0x1000>; interrupts = <0 43 4>; + cache-unified; cache-level = <2>; arm,data-latency = <1 1 1>; arm,tag-latency = <1 1 1>; From 613880a1218286eb2d6b1cf5a574241eec32e7aa Mon Sep 17 00:00:00 2001 From: Robert Schwebel Date: Thu, 7 May 2015 15:45:04 +0100 Subject: [PATCH 454/652] ARM: vexpress/ca9: Add interrupt-affinity to the PMU node Commit 9fd85eb502a7 ("ARM: pmu: add support for interrupt-affinity property") added an optional "interrupt-affinity" property, to specify the CPU affinity for each SPI listed in the interrupts property. Without this property, we get this boot warning: CPU PMU: Failed to parse /interrupt-affinity[0] This patch adds interrupt-affinity to the PMU node in the vexpress-v2p-ca9 device tree. Signed-off-by: Robert Schwebel Acked-by: Sudeep Holla Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/vexpress-v2p-ca9.dts | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index a411274e8b6b..d949facba376 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -33,28 +33,28 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + A9_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; }; - cpu@1 { + A9_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; next-level-cache = <&L2>; }; - cpu@2 { + A9_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; next-level-cache = <&L2>; }; - cpu@3 { + A9_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; @@ -182,6 +182,8 @@ <0 61 4>, <0 62 4>, <0 63 4>; + interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>; + }; dcc { From 51ef519cbd4c9d7478c4050845ffb1cdc4e70fc1 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 7 May 2015 15:45:05 +0100 Subject: [PATCH 455/652] ARM: vexpress/tc2: Add interrupt-affinity to the PMU node Commit 9fd85eb502a7 ("ARM: pmu: add support for interrupt-affinity property") added an optional "interrupt-affinity" property, to specify the CPU affinity for each SPI listed in the interrupts property. Without this property, we get this boot warning: CPU PMU: Failed to parse /interrupt-affinity[0] This patch adds interrupt-affinity to the PMU node in the vexpress-ca15_a7(a.k.a TC2) device tree. Signed-off-by: Sudeep Holla Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 7a2aeacd62c0..107395c32d82 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -191,6 +191,7 @@ compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; + interrupt-affinity = <&cpu0>, <&cpu1>; }; oscclk6a: oscclk6a { From 6938f8558167fd1d30233018976ebe310fa6f69b Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 12 May 2015 02:13:50 -0400 Subject: [PATCH 456/652] Update be2net maintainers' email addresses Emulex developers' email addresses are now "@avagotech" instead of "@emulex". I'm also replacing Subbu with Padmanabh and Sriharsha in the maintainers list. The driver's heading was outdated and did not include some of the chip types (BE3, Lancer and Skyhawk) that the driver has been supporting for a longtime. I've updated this too. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- MAINTAINERS | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index fa4e59d9c07b..85bd662514c8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8799,10 +8799,11 @@ W: http://www.emulex.com S: Supported F: drivers/scsi/be2iscsi/ -SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER -M: Sathya Perla -M: Subbu Seetharaman -M: Ajit Khaparde +Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER +M: Sathya Perla +M: Ajit Khaparde +M: Padmanabh Ratnakar +M: Sriharsha Basavapatna L: netdev@vger.kernel.org W: http://www.emulex.com S: Supported From 31fc835fc787aad38e8985d593f8ad0d18825323 Mon Sep 17 00:00:00 2001 From: Hans Ulli Kroll Date: Mon, 11 May 2015 18:13:11 +0200 Subject: [PATCH 457/652] ARM: gemini: fix compiler warning due wrong data type This patch fixes a compiler warning in gemini_restart() issued by commit 7b6d864b48d9 ("reboot:arm: reboot_mode changes from char to enum reboot_mode"). arch/arm/mach-gemini/board-rut1xx.c:93:2: warning: initialization from incompatible pointer type The warning is harmless, and the patch does not need to be backported to stable kernels. Fixes: 7b6d864b48d ("reboot:arm: reboot_mode changes from char to enum reboot_mode.") Signed-off-by: Hans Ulli Kroll Signed-off-by: Arnd Bergmann --- arch/arm/mach-gemini/common.h | 4 +++- arch/arm/mach-gemini/reset.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h index 38a45260a7c8..dd883698ff7e 100644 --- a/arch/arm/mach-gemini/common.h +++ b/arch/arm/mach-gemini/common.h @@ -12,6 +12,8 @@ #ifndef __GEMINI_COMMON_H__ #define __GEMINI_COMMON_H__ +#include + struct mtd_partition; extern void gemini_map_io(void); @@ -26,6 +28,6 @@ extern int platform_register_pflash(unsigned int size, struct mtd_partition *parts, unsigned int nr_parts); -extern void gemini_restart(char mode, const char *cmd); +extern void gemini_restart(enum reboot_mode mode, const char *cmd); #endif /* __GEMINI_COMMON_H__ */ diff --git a/arch/arm/mach-gemini/reset.c b/arch/arm/mach-gemini/reset.c index b26659759e27..21a6d6d4f9c4 100644 --- a/arch/arm/mach-gemini/reset.c +++ b/arch/arm/mach-gemini/reset.c @@ -14,7 +14,9 @@ #include #include -void gemini_restart(char mode, const char *cmd) +#include "common.h" + +void gemini_restart(enum reboot_mode mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET); From 4801ba338acad2e69e905e0c537e8ba2682c4e65 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 May 2015 17:15:23 +0100 Subject: [PATCH 458/652] arm64: perf: fix memory leak when probing PMU PPIs Commit d795ef9aa831 ("arm64: perf: don't warn about missing interrupt-affinity property for PPIs") added a check for PPIs so that we avoid parsing the interrupt-affinity property for these naturally affine interrupts. Unfortunately, this check can trigger an early (successful) return and we will leak the irqs array. This patch fixes the issue by reordering the code so that the check is performed before any independent allocation. Reported-by: David Binderman Signed-off-by: Will Deacon --- arch/arm64/kernel/perf_event.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 23f25acf43a9..cce18c85d2e8 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1315,15 +1315,15 @@ static int armpmu_device_probe(struct platform_device *pdev) if (!cpu_pmu) return -ENODEV; - irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); - if (!irqs) - return -ENOMEM; - /* Don't bother with PPIs; they're already affine */ irq = platform_get_irq(pdev, 0); if (irq >= 0 && irq_is_percpu(irq)) return 0; + irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); + if (!irqs) + return -ENOMEM; + for (i = 0; i < pdev->num_resources; ++i) { struct device_node *dn; int cpu; From 620b155034570f577470cf5309f741bac6a6e32b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 6 May 2015 11:52:32 +0100 Subject: [PATCH 459/652] MIPS: fix FP mode selection in lieu of .MIPS.abiflags data Commit 46490b572544 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") reworked the ELF FP ABI mode selection logic, but when CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries which have no PT_MIPS_ABIFLAGS program header & associated .MIPS.abiflags section. A default mode is selected based upon whether the ELF contains MIPS32 or MIPS64 code, but that selection is made in arch_elf_pt_proc. arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is found. If one is not found then arch_elf_pt_proc is never called, and no default overall_fp_mode value is selected. When arch_check_elf is called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both prog_req & interp_req being set to none_req. none_req matches none of the conditions for mode selection at the end of arch_check_elf, so overall_fp_mode is left untouched. Finally once mips_set_personality_fp is called the BUG() in the default case is then hit & the kernel likely panics. Fix this by moving the selection of a default overall mode to the start of arch_check_elf, which runs once per ELF executed regardless of whether it has a PT_MIPS_ABIFLAGS program header. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: Matthew Fortune Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.0+ Patchwork: http://patchwork.linux-mips.org/patch/9978/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/elf.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c index be4899f3c393..4a4d9e067c89 100644 --- a/arch/mips/kernel/elf.c +++ b/arch/mips/kernel/elf.c @@ -76,14 +76,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf, /* Lets see if this is an O32 ELF */ if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) { - /* FR = 1 for N32 */ - if (ehdr32->e_flags & EF_MIPS_ABI2) - state->overall_fp_mode = FP_FR1; - else - /* Set a good default FPU mode for O32 */ - state->overall_fp_mode = cpu_has_mips_r6 ? - FP_FRE : FP_FR0; - if (ehdr32->e_flags & EF_MIPS_FP64) { /* * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it @@ -104,9 +96,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf, (char *)&abiflags, sizeof(abiflags)); } else { - /* FR=1 is really the only option for 64-bit */ - state->overall_fp_mode = FP_FR1; - if (phdr64->p_type != PT_MIPS_ABIFLAGS) return 0; if (phdr64->p_filesz < sizeof(abiflags)) @@ -137,6 +126,7 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, struct elf32_hdr *ehdr = _ehdr; struct mode_req prog_req, interp_req; int fp_abi, interp_fp_abi, abi0, abi1, max_abi; + bool is_mips64; if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT)) return 0; @@ -152,10 +142,22 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, abi0 = abi1 = fp_abi; } - /* ABI limits. O32 = FP_64A, N32/N64 = FP_SOFT */ - max_abi = ((ehdr->e_ident[EI_CLASS] == ELFCLASS32) && - (!(ehdr->e_flags & EF_MIPS_ABI2))) ? - MIPS_ABI_FP_64A : MIPS_ABI_FP_SOFT; + is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) || + (ehdr->e_flags & EF_MIPS_ABI2); + + if (is_mips64) { + /* MIPS64 code always uses FR=1, thus the default is easy */ + state->overall_fp_mode = FP_FR1; + + /* Disallow access to the various FPXX & FP64 ABIs */ + max_abi = MIPS_ABI_FP_SOFT; + } else { + /* Default to a mode capable of running code expecting FR=0 */ + state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0; + + /* Allow all ABIs we know about */ + max_abi = MIPS_ABI_FP_64A; + } if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) || (abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN)) From ec04847c0c5b471bab2dacceadfdb803a9d1a2ea Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 8 May 2015 16:36:33 -0500 Subject: [PATCH 460/652] RDMA/core: Fix for parsing netlink string attribute The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute. Without this fix parsing of the nlmsg by the userspace port mapper service fails because of unknown attribute length, causing the port mapper service not to register the client, which has sent the nlmsg. Signed-off-by: Tatyana Nikolova Cc: #v3.16 Reviewed-By: Jason Gunthorpe Signed-off-by: Doug Ledford --- drivers/infiniband/core/iwpm_msg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/iwpm_msg.c b/drivers/infiniband/core/iwpm_msg.c index ab081702566f..e6ffa2e66c1a 100644 --- a/drivers/infiniband/core/iwpm_msg.c +++ b/drivers/infiniband/core/iwpm_msg.c @@ -33,7 +33,7 @@ #include "iwpm_util.h" -static const char iwpm_ulib_name[] = "iWarpPortMapperUser"; +static const char iwpm_ulib_name[IWPM_ULIBNAME_SIZE] = "iWarpPortMapperUser"; static int iwpm_ulib_version = 3; static int iwpm_user_pid = IWPM_PID_UNDEFINED; static atomic_t echo_nlmsg_seq; From fcf3b54282e4c5a95a1f45f67558bc105acdbc6a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 12 May 2015 12:51:38 -0400 Subject: [PATCH 461/652] drm/radeon: add new bonaire pci id Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- include/drm/drm_pciids.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 2dd405c9be78..45c39a37f924 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -186,6 +186,7 @@ {0x1002, 0x6658, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_NEW_MEMMAP}, \ {0x1002, 0x665c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_NEW_MEMMAP}, \ {0x1002, 0x665d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x665f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ From ec40f925e0151e3c130fce2b5a1c6389c5b5e4dd Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 12 May 2015 13:42:42 -0400 Subject: [PATCH 462/652] IB/qib: fix test of unsigned variable Commit d4988623cc60 ("IB/qib: use arch_phys_wc_add()") adjusted mtrr inititialization to use the new interface. Unfortunately, the new interface returns a signed value and the patch tested the unsigned wc_cookie. Fix the issue by changing the type of wc_cookie to int. For the success case the ret left at zero to avoid a warning from the caller. For failure wc_cookie is used as the ret. Signed-off-by: Mike Marciniszyn Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qib/qib.h | 2 +- drivers/infiniband/hw/qib/qib_wc_x86_64.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index ba5173e24973..7df16f74bb45 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -903,7 +903,7 @@ struct qib_devdata { /* PCI Device ID (here for NodeInfo) */ u16 deviceid; /* for write combining settings */ - unsigned long wc_cookie; + int wc_cookie; unsigned long wc_base; unsigned long wc_len; diff --git a/drivers/infiniband/hw/qib/qib_wc_x86_64.c b/drivers/infiniband/hw/qib/qib_wc_x86_64.c index 6d61ef98721c..edd0ddbd4481 100644 --- a/drivers/infiniband/hw/qib/qib_wc_x86_64.c +++ b/drivers/infiniband/hw/qib/qib_wc_x86_64.c @@ -118,7 +118,8 @@ int qib_enable_wc(struct qib_devdata *dd) if (!ret) { dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen); if (dd->wc_cookie < 0) - ret = -EINVAL; + /* use error from routine */ + ret = dd->wc_cookie; } return ret; From fdb6eb0a12871d5bfaf266c5a0d5259a5437a72f Mon Sep 17 00:00:00 2001 From: Koro Chen Date: Mon, 11 May 2015 10:36:53 +0800 Subject: [PATCH 463/652] ASoC: dapm: Modify widget stream name according to prefix When there is prefix specified, currently we will add this prefix in widget->name, but not in widget->sname. it causes failure at snd_soc_dapm_link_dai_widgets: if (!w->sname || !strstr(w->sname, dai_w->name)) because dai_w->name has prefix added, but w->sname does not. We should also add prefix for stream name Signed-off-by: Koro Chen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/soc-dapm.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index defe0f0082b5..158204d08924 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3100,11 +3100,16 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, } prefix = soc_dapm_prefix(dapm); - if (prefix) + if (prefix) { w->name = kasprintf(GFP_KERNEL, "%s %s", prefix, widget->name); - else + if (widget->sname) + w->sname = kasprintf(GFP_KERNEL, "%s %s", prefix, + widget->sname); + } else { w->name = kasprintf(GFP_KERNEL, "%s", widget->name); - + if (widget->sname) + w->sname = kasprintf(GFP_KERNEL, "%s", widget->sname); + } if (w->name == NULL) { kfree(w); return NULL; From b270687977280a2e49c7e53db14bd1b22f842295 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 7 Apr 2015 15:03:34 +0200 Subject: [PATCH 464/652] ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards The Marvell mwifiex driver prevents the system to enter into a suspend state if the card power is not preserved during a suspend/resume cycle. So Suspend-to-RAM and Suspend-to-idle is failing on Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks. Add the keep-power-in-suspend Power Management property to the SDIO/MMC node so the mwifiex suspend handler doesn't fail and the system is able to enter into a suspend state. Signed-off-by: Javier Martinez Canillas Reviewed-by: Doug Anderson Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 1 + arch/arm/boot/dts/exynos5800-peach-pi.dts | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 0788d08fb43e..146e71118a72 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -711,6 +711,7 @@ num-slots = <1>; broken-cd; cap-sdio-irq; + keep-power-in-suspend; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <1>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 412f41d62686..02eb8b15374f 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -674,6 +674,7 @@ num-slots = <1>; broken-cd; cap-sdio-irq; + keep-power-in-suspend; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <1>; From e5cbec617f1791256197ebaca8b04c0eb96fc574 Mon Sep 17 00:00:00 2001 From: Julien Grall Date: Wed, 13 May 2015 03:49:04 +0900 Subject: [PATCH 465/652] ARM: EXYNOS: Don't try to initialize suspend on old DT Since commit 8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains"), a suspend/resume is not supported on old DT. Although, rather than printing a warning and continue to boot, the kernel will segfault just after: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/arm/mach-exynos/suspend.c:726 exynos_pm_init+0x4c/0xc8() Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc3 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x70/0x8c) [] (dump_stack) from [] (warn_slowpath_common+0x74/0xac) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (exynos_pm_init+0x4c/0xc8) [] (exynos_pm_init) from [] (init_machine_late+0x1c/0x28) [] (init_machine_late) from [] (do_one_initcall+0x80/0x1d0) [] (do_one_initcall) from [] (kernel_init_freeable+0x10c/0x1d8) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [] (kernel_init) from [] (ret_from_fork+0x14/0x34) ---[ end trace 335bd937d409f3c7 ]--- Outdated DT detected, suspend/resume will NOT work Unable to handle kernel NULL pointer dereference at virtual address 00000608 pgd = c0204000 [00000608] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc3 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: db06c000 ti: db05a000 task.ti: db05a000 PC is at exynos_pm_init+0x6c/0xc8 LR is at exynos_pm_init+0x54/0xc8 pc : [] lr : [] psr: 60000113 sp : db05bee8 ip : 00000000 fp : 00000000 r10: 00000116 r9 : c0dab2d4 r8 : d8d5f440 r7 : c0db7ad8 r6 : c0db7ad8 r5 : 00000000 r4 : c0ceaacc r3 : c0eb2aec r2 : c0951e40 r1 : 00000000 r0 : c0eb2acc Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 6020406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xdb05a220) Stack: (0xdb05bee8 to 0xdb05c000) bee0: c0db7ad8 c0d8fe34 c0cf17c8 c0ceaae8 00000000 c020aa64 bf00: 00000033 c09580b8 db04fd00 c0ed79a4 c0eb1000 c0ce8588 c0ca2bc4 c0353fcc bf20: 00000000 c0df358c 60000113 00000000 dbfffba4 00000000 c0ca2bc4 c026654c bf40: c0b80134 c0ca1a64 00000007 00000007 c0df3554 c0d6c2f4 00000007 c0d6c2d4 bf60: c0eb1000 c0ce8588 c0dab2d4 00000116 00000000 c0ce8d4c 00000007 00000007 bf80: c0ce8588 c0944a24 00000000 c0944a24 00000000 00000000 00000000 00000000 bfa0: 00000000 c0944a2c 00000000 c0210e60 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [] (exynos_pm_init) from [] (init_machine_late+0x1c/0x28) [] (init_machine_late) from [] (do_one_initcall+0x80/0x1d0) [] (do_one_initcall) from [] (kernel_init_freeable+0x10c/0x1d8) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [] (kernel_init) from [] (ret_from_fork+0x14/0x34) Code: e59f005c e59220c0 e5901000 e5832000 (e591e608) ---[ end trace 335bd937d409f3c8 ]--- This is happening because pmu_base_addr is only initialized when the PMU is an interrupt controller. It's not the case on old DT. Signed-off-by: Julien Grall Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/suspend.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 3e6aea7f83af..b6f3ddc3cf8e 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -723,8 +723,10 @@ void __init exynos_pm_init(void) return; } - if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) + if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); + return; + } pm_data = (const struct exynos_pm_data *) match->data; From 85e36a1f4a735d991ba5106781ea48e89a0b8901 Mon Sep 17 00:00:00 2001 From: Zidan Wang Date: Tue, 12 May 2015 14:58:36 +0800 Subject: [PATCH 466/652] ASoC: wm8960: fix "RINPUT3" audio route error It should be "RINPUT3" instead of "LINPUT3" route to "Right Input Mixer". Signed-off-by: Zidan Wang Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 3035d9856415..e97a7615df85 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -395,7 +395,7 @@ static const struct snd_soc_dapm_route audio_paths[] = { { "Right Input Mixer", "Boost Switch", "Right Boost Mixer", }, { "Right Input Mixer", NULL, "RINPUT1", }, /* Really Boost Switch */ { "Right Input Mixer", NULL, "RINPUT2" }, - { "Right Input Mixer", NULL, "LINPUT3" }, + { "Right Input Mixer", NULL, "RINPUT3" }, { "Left ADC", NULL, "Left Input Mixer" }, { "Right ADC", NULL, "Right Input Mixer" }, From 713276ea88a295a79aa6633ba639ed47692a8de4 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:18 -0300 Subject: [PATCH 467/652] iio: adc: cc10001: Fix incorrect use of power-up/power-down register At present we are incorrectly setting the register to 0x1 to power up the ADC. Since it is an active high power down register, we need to set the register to 0x0 to actually power up. Conversely, writing 0x1 to the register powers it down. This commit adds a couple of helpers to make the code clearer and then use them to do the power-up/power-down properly. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index 357e6c213784..e7810ac8e295 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -35,8 +35,9 @@ #define CC10001_ADC_EOC_SET BIT(0) #define CC10001_ADC_CHSEL_SAMPLED 0x0c -#define CC10001_ADC_POWER_UP 0x10 -#define CC10001_ADC_POWER_UP_SET BIT(0) +#define CC10001_ADC_POWER_DOWN 0x10 +#define CC10001_ADC_POWER_DOWN_SET BIT(0) + #define CC10001_ADC_DEBUG 0x14 #define CC10001_ADC_DATA_COUNT 0x20 @@ -78,6 +79,18 @@ static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev, return readl(adc_dev->reg_base + reg); } +static void cc10001_adc_power_up(struct cc10001_adc_device *adc_dev) +{ + cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, 0); + ndelay(adc_dev->start_delay_ns); +} + +static void cc10001_adc_power_down(struct cc10001_adc_device *adc_dev) +{ + cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, + CC10001_ADC_POWER_DOWN_SET); +} + static void cc10001_adc_start(struct cc10001_adc_device *adc_dev, unsigned int channel) { @@ -139,11 +152,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) mutex_lock(&adc_dev->lock); - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, - CC10001_ADC_POWER_UP_SET); - - /* Wait for 8 (6+2) clock cycles before activating START */ - ndelay(adc_dev->start_delay_ns); + cc10001_adc_power_up(adc_dev); /* Calculate delay step for eoc and sampled data */ delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT; @@ -167,7 +176,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) } done: - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0); + cc10001_adc_power_down(adc_dev); mutex_unlock(&adc_dev->lock); @@ -186,11 +195,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev, unsigned int delay_ns; u16 val; - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, - CC10001_ADC_POWER_UP_SET); - - /* Wait for 8 (6+2) clock cycles before activating START */ - ndelay(adc_dev->start_delay_ns); + cc10001_adc_power_up(adc_dev); /* Calculate delay step for eoc and sampled data */ delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT; @@ -199,7 +204,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev, val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns); - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0); + cc10001_adc_power_down(adc_dev); return val; } From 65a761bf8d55fdcf8ecc4642382a4e76c086e44c Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:19 -0300 Subject: [PATCH 468/652] iio: adc: cc10001: Fix regulator_get_voltage() return value check regulator_get_voltage() returns a non-negative value in case of success, and a negative error in case of error. Let's fix this. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index e7810ac8e295..fb7c5d2cc61a 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -230,7 +230,7 @@ static int cc10001_adc_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: ret = regulator_get_voltage(adc_dev->reg); - if (ret) + if (ret < 0) return ret; *val = ret / 1000; From f29b212edb9e253cafcb4a2ab7842a890989f1a5 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Thu, 7 May 2015 18:22:20 -0300 Subject: [PATCH 469/652] iio: adc: cc10001: Add delay before setting START bit According to hardware team there should be some delay after setting channel number, start mode and before setting START. Add a one microsecond delay for this purpose. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/cc10001_adc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index fb7c5d2cc61a..115f6e99a7fa 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -100,6 +100,7 @@ static void cc10001_adc_start(struct cc10001_adc_device *adc_dev, val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV; cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val); + udelay(1); val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG); val = val | CC10001_ADC_START_CONV; cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val); From f0828ba96d02d4d4b197c531b34c662ee3c928df Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 7 May 2015 20:32:04 -0300 Subject: [PATCH 470/652] iio: light: hid-sensor-prox: Fix memory leak in probe() 'channels' is allocated via kmemdup and it is never freed. Use 'indio_dev->channels' directly instead, so that we avoid such memory leak problem. Reported-by: Alexey Khoroshilov Signed-off-by: Fabio Estevam Reviewed-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-prox.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index 88f21bbe947c..36a2de35e525 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -250,7 +250,6 @@ static int hid_prox_probe(struct platform_device *pdev) struct iio_dev *indio_dev; struct prox_state *prox_state; struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; - struct iio_chan_spec *channels; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct prox_state)); @@ -269,20 +268,21 @@ static int hid_prox_probe(struct platform_device *pdev) return ret; } - channels = kmemdup(prox_channels, sizeof(prox_channels), GFP_KERNEL); - if (!channels) { + indio_dev->channels = kmemdup(prox_channels, sizeof(prox_channels), + GFP_KERNEL); + if (!indio_dev->channels) { dev_err(&pdev->dev, "failed to duplicate channels\n"); return -ENOMEM; } - ret = prox_parse_report(pdev, hsdev, channels, + ret = prox_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, HID_USAGE_SENSOR_PROX, prox_state); if (ret) { dev_err(&pdev->dev, "failed to setup attributes\n"); goto error_free_dev_mem; } - indio_dev->channels = channels; indio_dev->num_channels = ARRAY_SIZE(prox_channels); indio_dev->dev.parent = &pdev->dev; From 17fc2e0a3db11889e942c5ab15a1fcb876638f25 Mon Sep 17 00:00:00 2001 From: Zidan Wang Date: Tue, 12 May 2015 14:58:50 +0800 Subject: [PATCH 471/652] ASoC: wm8994: correct BCLK DIV 348 to 384 According to the RM of wm8958, BCLK DIV 348 doesn't exist, correct it to 384. Signed-off-by: Zidan Wang Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 4fbc7689339a..a1c04dab6684 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2754,7 +2754,7 @@ static struct { }; static int fs_ratios[] = { - 64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536 + 64, 128, 192, 256, 384, 512, 768, 1024, 1408, 1536 }; static int bclk_divs[] = { From f4f01b542c027b0df57109140c3ee48321705c88 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 8 May 2015 15:58:07 -0700 Subject: [PATCH 472/652] infiniband: Remove duplicated KERN_ from pr_ uses These KERN_ uses are unnecessary with pr_ and cause bad logging output so remove them. Signed-off-by: Joe Perches Acked-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/device.c | 4 ++-- drivers/infiniband/hw/mlx4/main.c | 3 +-- drivers/infiniband/hw/mlx5/qp.c | 2 +- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index cf54d6922dc4..7e895d714b19 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -1386,7 +1386,7 @@ static void recover_lost_dbs(struct uld_ctx *ctx, struct qp_list *qp_list) t4_sq_host_wq_pidx(&qp->wq), t4_sq_wq_size(&qp->wq)); if (ret) { - pr_err(KERN_ERR MOD "%s: Fatal error - " + pr_err(MOD "%s: Fatal error - " "DB overflow recovery failed - " "error syncing SQ qid %u\n", pci_name(ctx->lldi.pdev), qp->wq.sq.qid); @@ -1402,7 +1402,7 @@ static void recover_lost_dbs(struct uld_ctx *ctx, struct qp_list *qp_list) t4_rq_wq_size(&qp->wq)); if (ret) { - pr_err(KERN_ERR MOD "%s: Fatal error - " + pr_err(MOD "%s: Fatal error - " "DB overflow recovery failed - " "error syncing RQ qid %u\n", pci_name(ctx->lldi.pdev), qp->wq.rq.qid); diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 57070c529dfb..cc64400d41ac 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -1569,8 +1569,7 @@ static void reset_gids_task(struct work_struct *work) MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED); if (err) - pr_warn(KERN_WARNING - "set port %d command failed\n", gw->port); + pr_warn("set port %d command failed\n", gw->port); } mlx4_free_cmd_mailbox(dev, mailbox); diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 4d7024b899cb..d35f62d4f4c5 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1392,7 +1392,7 @@ static int mlx5_set_path(struct mlx5_ib_dev *dev, const struct ib_ah_attr *ah, if (ah->ah_flags & IB_AH_GRH) { if (ah->grh.sgid_index >= gen->port[port - 1].gid_table_len) { - pr_err(KERN_ERR "sgid_index (%u) too large. max is %d\n", + pr_err("sgid_index (%u) too large. max is %d\n", ah->grh.sgid_index, gen->port[port - 1].gid_table_len); return -EINVAL; } From d045c77c1a69703143a36169c224429c48b9eecd Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 11 May 2015 22:01:27 +0200 Subject: [PATCH 473/652] parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures On architectures where the stack grows upwards (CONFIG_STACK_GROWSUP=y, currently parisc and metag only) stack randomization sometimes leads to crashes when the stack ulimit is set to lower values than STACK_RND_MASK (which is 8 MB by default if not defined in arch-specific headers). The problem is, that when the stack vm_area_struct is set up in fs/exec.c, the additional space needed for the stack randomization (as defined by the value of STACK_RND_MASK) was not taken into account yet and as such, when the stack randomization code added a random offset to the stack start, the stack effectively got smaller than what the user defined via rlimit_max(RLIMIT_STACK) which then sometimes leads to out-of-stack situations and crashes. This patch fixes it by adding the maximum possible amount of memory (based on STACK_RND_MASK) which theoretically could be added by the stack randomization code to the initial stack size. That way, the user-defined stack size is always guaranteed to be at minimum what is defined via rlimit_max(RLIMIT_STACK). This bug is currently not visible on the metag architecture, because on metag STACK_RND_MASK is defined to 0 which effectively disables stack randomization. The changes to fs/exec.c are inside an "#ifdef CONFIG_STACK_GROWSUP" section, so it does not affect other platformws beside those where the stack grows upwards (parisc and metag). Signed-off-by: Helge Deller Cc: linux-parisc@vger.kernel.org Cc: James Hogan Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org # v3.16+ --- arch/parisc/include/asm/elf.h | 4 ++++ arch/parisc/kernel/sys_parisc.c | 3 +++ fs/exec.c | 3 +++ 3 files changed, 10 insertions(+) diff --git a/arch/parisc/include/asm/elf.h b/arch/parisc/include/asm/elf.h index 3391d061eccc..78c9fd32c554 100644 --- a/arch/parisc/include/asm/elf.h +++ b/arch/parisc/include/asm/elf.h @@ -348,6 +348,10 @@ struct pt_regs; /* forward declaration... */ #define ELF_HWCAP 0 +#define STACK_RND_MASK (is_32bit_task() ? \ + 0x7ff >> (PAGE_SHIFT - 12) : \ + 0x3ffff >> (PAGE_SHIFT - 12)) + struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *); #define arch_randomize_brk arch_randomize_brk diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index e1ffea2f9a0b..5aba01ac457f 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -77,6 +77,9 @@ static unsigned long mmap_upper_limit(void) if (stack_base > STACK_SIZE_MAX) stack_base = STACK_SIZE_MAX; + /* Add space for stack randomization. */ + stack_base += (STACK_RND_MASK << PAGE_SHIFT); + return PAGE_ALIGN(STACK_TOP - stack_base); } diff --git a/fs/exec.c b/fs/exec.c index 49a1c61433b7..1977c2a553ac 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -659,6 +659,9 @@ int setup_arg_pages(struct linux_binprm *bprm, if (stack_base > STACK_SIZE_MAX) stack_base = STACK_SIZE_MAX; + /* Add space for stack randomization. */ + stack_base += (STACK_RND_MASK << PAGE_SHIFT); + /* Make sure we didn't let the argument array grow too large. */ if (vma->vm_end - vma->vm_start > stack_base) return -ENOMEM; From 85a9fb47c56aa5e43c54034002232c0585a4b781 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 12 Mar 2015 15:39:13 -0700 Subject: [PATCH 474/652] tools: Fix tools/vm build libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by: Andi Kleen Cc: Andrew Morton Link: http://lkml.kernel.org/r/1426199953-15324-1-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/vm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/vm/Makefile b/tools/vm/Makefile index ac884b65a072..93aadaf7ff63 100644 --- a/tools/vm/Makefile +++ b/tools/vm/Makefile @@ -3,7 +3,7 @@ TARGETS=page-types slabinfo page_owner_sort LIB_DIR = ../lib/api -LIBS = $(LIB_DIR)/libapikfs.a +LIBS = $(LIB_DIR)/libapi.a CC = $(CROSS_COMPILE)gcc CFLAGS = -Wall -Wextra -I../lib/ From 466c1eb07f42bd27825af24d86b46d05e5e350b9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 23 Apr 2015 15:00:16 +0100 Subject: [PATCH 475/652] perf tools: Use getconf to determine number of online CPUs Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent change to get it working for Sparc broke arm and arm64 platforms. Use sysconf to determine the number of online CPUs only parsing /proc/cpuinfo when sysconf is not available. Signed-off-by: Will Deacon Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Mark Rutland Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20150423140454.GJ1652@arm.com [ Made it fall back to parsing /proc when getconf not found ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index c699dc35eef9..d31a7bbd7cee 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -24,7 +24,7 @@ unexport MAKEFLAGS # (To override it, run 'make JOBS=1' and similar.) # ifeq ($(JOBS),) - JOBS := $(shell egrep -c '^processor|^CPU' /proc/cpuinfo 2>/dev/null) + JOBS := $(shell (getconf _NPROCESSORS_ONLN || egrep -c '^processor|^CPU[0-9]' /proc/cpuinfo) 2>/dev/null) ifeq ($(JOBS),0) JOBS := 1 endif From 03dce595270f22d59a6f37e9170287c1afd94bc2 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 12 May 2015 15:20:57 +0100 Subject: [PATCH 476/652] MIPS: Fix a preemption issue with thread's FPU defaults Fix "BUG: using smp_processor_id() in preemptible" reported in accesses to thread's FPU defaults: the value to initialise FSCR to at program startup, the FCSR r/w mask and the contents of FIR in full FPU emulation, removing a regression introduced with 9b26616c [MIPS: Respect the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR feature flags for full emulation]. Use `boot_cpu_data' to obtain the data from, following the approach that `cpu_has_*' macros take and avoiding the call to `smp_processor_id' made in the reference to `current_cpu_data'. The contents of FSCR have to be consistent across processors in an SMP system, the settings there must not change as a thread is migrated across processors. And the contents of FIR are guaranteed to be consistent in FPU emulation, by definition. Signed-off-by: Maciej W. Rozycki Tested-by: Ezequiel Garcia Tested-by: Paul Martin Cc: Markos Chandras Cc: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10030/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/elf.h | 4 ++-- arch/mips/kernel/ptrace.c | 2 +- arch/mips/math-emu/cp1emu.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index a594d8ed9698..f19e890b99d2 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -304,7 +304,7 @@ do { \ \ current->thread.abi = &mips_abi; \ \ - current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31; \ + current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31; \ } while (0) #endif /* CONFIG_32BIT */ @@ -366,7 +366,7 @@ do { \ else \ current->thread.abi = &mips_abi; \ \ - current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31; \ + current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31; \ \ p = personality(current->personality); \ if (p != PER_LINUX32 && p != PER_LINUX) \ diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index d544e774eea6..e933a309f2ea 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -176,7 +176,7 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data) __get_user(value, data + 64); fcr31 = child->thread.fpu.fcr31; - mask = current_cpu_data.fpu_msk31; + mask = boot_cpu_data.fpu_msk31; child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask); /* FIR may not be written. */ diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index d31c537ace1d..22b9b2cb9219 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -889,7 +889,7 @@ static inline void cop1_cfc(struct pt_regs *xcp, struct mips_fpu_struct *ctx, break; case FPCREG_RID: - value = current_cpu_data.fpu_id; + value = boot_cpu_data.fpu_id; break; default: @@ -921,7 +921,7 @@ static inline void cop1_ctc(struct pt_regs *xcp, struct mips_fpu_struct *ctx, (void *)xcp->cp0_epc, MIPSInst_RT(ir), value); /* Preserve read-only bits. */ - mask = current_cpu_data.fpu_msk31; + mask = boot_cpu_data.fpu_msk31; fcr31 = (value & ~mask) | (fcr31 & mask); break; From 336b7e1f230912cd8df2497be8dd7be4647d8fc8 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 11 May 2015 14:06:32 -0400 Subject: [PATCH 477/652] block: remove export for blk_queue_bio With commit ff36ab345 ("dm: remove request-based logic from make_request_fn wrapper") DM no longer calls blk_queue_bio() directly, so remove its export. Doing so required a forward declaration in blk-core.c. Signed-off-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-core.c | 5 +++-- include/linux/blkdev.h | 2 -- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 7871603f0a29..03b5f8d77f37 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -734,6 +734,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) } EXPORT_SYMBOL(blk_init_queue_node); +static void blk_queue_bio(struct request_queue *q, struct bio *bio); + struct request_queue * blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn, spinlock_t *lock) @@ -1578,7 +1580,7 @@ void init_request_from_bio(struct request *req, struct bio *bio) blk_rq_bio_prep(req->q, req, bio); } -void blk_queue_bio(struct request_queue *q, struct bio *bio) +static void blk_queue_bio(struct request_queue *q, struct bio *bio) { const bool sync = !!(bio->bi_rw & REQ_SYNC); struct blk_plug *plug; @@ -1686,7 +1688,6 @@ out_unlock: spin_unlock_irq(q->queue_lock); } } -EXPORT_SYMBOL_GPL(blk_queue_bio); /* for device mapper only */ /* * If bio->bi_dev is a partition, remap the location diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7f9a516f24de..5d93a6645e88 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -821,8 +821,6 @@ extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t, extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t, struct scsi_ioctl_command __user *); -extern void blk_queue_bio(struct request_queue *q, struct bio *bio); - /* * A queue has just exitted congestion. Note this in the global counter of * congested queues, and wake up anyone who was waiting for requests to be From 73d8f99ce42c7da97822faed6aa14578a708b19d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 11 May 2015 23:37:05 +0300 Subject: [PATCH 478/652] MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1 GCC 5.1 defines __REGISTER_PREFIX__ to $. This will break sparse command line (and build fails with: /bin/sh: syntax error: unexpected "(") since make tries to expand starting with the dollar sign with a make variable. Prevent that by using double dollar sign. Signed-off-by: Aaro Koskinen Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10025/ Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 5200f649dd4e..ae2dd59050f7 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -277,7 +277,7 @@ LDFLAGS += -m $(ld-emul) ifdef CONFIG_MIPS CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \ - sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/") + sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g') ifdef CONFIG_64BIT CHECKFLAGS += -m64 endif From 2d2ec2f7c9560aa12417e5d8c26fe159cfdd3827 Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Fri, 8 May 2015 15:10:00 -0700 Subject: [PATCH 479/652] MIPS: traps: remove extra Tainted: line from __show_regs() output __show_regs() calls show_regs_print_info(), which already outputs the Tainted: information. So, no need to output it twice. Signed-off-by: Petri Gynther Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9997/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index ba32e48d4697..d2d1c1933bc9 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -269,7 +269,6 @@ static void __show_regs(const struct pt_regs *regs) */ printk("epc : %0*lx %pS\n", field, regs->cp0_epc, (void *) regs->cp0_epc); - printk(" %s\n", print_tainted()); printk("ra : %0*lx %pS\n", field, regs->regs[31], (void *) regs->regs[31]); From 5f508c43a7648baa892528922402f1e13f258bd4 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 8 May 2015 17:38:52 +0200 Subject: [PATCH 480/652] MIPS: KVM: Fix unused variable build warning As kvm_mips_complete_mmio_load() did not yet modify PC at this point as James Hogans explained the curr_pc variable and the comments along with it can be dropped. Signed-off-by: Nicholas Mc Guire Link: http://lkml.org/lkml/2015/5/8/422 Cc: Gleb Natapov Cc: Paolo Bonzini Cc: James Hogan Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9993/ Signed-off-by: Ralf Baechle --- arch/mips/kvm/emulate.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index 6230f376a44e..4b50c5787e25 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -2389,7 +2389,6 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, { unsigned long *gpr = &vcpu->arch.gprs[vcpu->arch.io_gpr]; enum emulation_result er = EMULATE_DONE; - unsigned long curr_pc; if (run->mmio.len > sizeof(*gpr)) { kvm_err("Bad MMIO length: %d", run->mmio.len); @@ -2397,11 +2396,6 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, goto done; } - /* - * Update PC and hold onto current PC in case there is - * an error and we want to rollback the PC - */ - curr_pc = vcpu->arch.pc; er = update_pc(vcpu, vcpu->arch.pending_load_cause); if (er == EMULATE_FAIL) return er; From 4305689d1ecd0993b68393dfa6f1fa728515e55d Mon Sep 17 00:00:00 2001 From: Joshua Kinard Date: Sun, 19 Apr 2015 21:45:25 -0400 Subject: [PATCH 481/652] MIPS: IP32: Fix build errors in reset code in DS1685 platform hook. Fix two build errors in reset code introduced in DS1685 platform hook patch. Signed-off-by: Joshua Kinard Fixes: 15beb694c661: "mips: ip32: add platform data hooks to use DS1685 driver" Cc: Andrew Morton Cc: Alessandro Zummo Cc: LKML Cc: rtc-linux@googlegroups.com Cc: Linux MIPS List Patchwork: https://patchwork.linux-mips.org/patch/9787/ Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index 0134db2ad0a8..5a2a82148d8d 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -130,9 +130,9 @@ struct platform_device ip32_rtc_device = { .resource = ip32_rtc_resources, }; -+static int __init sgio2_rtc_devinit(void) +static __init int sgio2_rtc_devinit(void) { return platform_device_register(&ip32_rtc_device); } -device_initcall(sgio2_cmos_devinit); +device_initcall(sgio2_rtc_devinit); From ff284f37fc0e6f3b51ede85c5944d571b640ac0f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 13 May 2015 00:44:14 +0200 Subject: [PATCH 482/652] Revert "ACPICA: Permanently set _REV to the value '2'." Revert commit b1ef29725865 (ACPICA: Permanently set _REV to the value '2'.) as it causes a sound regression to happen on Dell XPS 13 (2015). Reported-by: Dominik Brodowski Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/utglobal.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index a72685c1e819..5e8df9177da4 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -102,19 +102,12 @@ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = { {"_SB_", ACPI_TYPE_DEVICE, NULL}, {"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL}, {"_TZ_", ACPI_TYPE_DEVICE, NULL}, - /* - * March, 2015: - * The _REV object is in the process of being deprecated, because - * other ACPI implementations permanently return 2. Thus, it - * has little or no value. Return 2 for compatibility with - * other ACPI implementations. - */ - {"_REV", ACPI_TYPE_INTEGER, ACPI_CAST_PTR(char, 2)}, + {"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL}, {"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME}, - {"_GL_", ACPI_TYPE_MUTEX, ACPI_CAST_PTR(char, 1)}, + {"_GL_", ACPI_TYPE_MUTEX, (char *)1}, #if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY) - {"_OSI", ACPI_TYPE_METHOD, ACPI_CAST_PTR(char, 1)}, + {"_OSI", ACPI_TYPE_METHOD, (char *)1}, #endif /* Table terminator */ From e3d8ecb70e16412b14fb11c1b68ecb533bd4ea64 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 11 May 2015 15:57:31 +0200 Subject: [PATCH 483/652] netns: return RTM_NEWNSID instead of RTM_GETNSID on a get Usually, RTM_NEWxxx is returned on a get (same as a dump). Fixes: 0c7aecd4bde4 ("netns: add rtnl cmd to add and get peer netns ids") Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/core/net_namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 78fc04ad36fc..572af0011997 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -601,7 +601,7 @@ static int rtnl_net_getid(struct sk_buff *skb, struct nlmsghdr *nlh) } err = rtnl_net_fill(msg, NETLINK_CB(skb).portid, nlh->nlmsg_seq, 0, - RTM_GETNSID, net, peer, -1); + RTM_NEWNSID, net, peer, -1); if (err < 0) goto err_out; From f9ea4a333c5f9f9d5133218f5c96643c207cc776 Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Tue, 21 Apr 2015 15:51:33 -0700 Subject: [PATCH 484/652] selftest/x86: build both bitnesses Using uname with the processor flag option in some cases can yield 'unknown' so lets use the machine flag option as it is deterministic. Add a dependency for all_32 when building on a x86 64 bit host so that both bitnesses are built in this case. Cc: Andy Lutomirski Acked-by: Andy Lutomirski Signed-off-by: Tyler Baker Signed-off-by: Shuah Khan --- tools/testing/selftests/x86/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile index ddf63569df5a..be93945bffab 100644 --- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -7,13 +7,13 @@ BINARIES_64 := $(TARGETS_C_BOTHBITS:%=%_64) CFLAGS := -O2 -g -std=gnu99 -pthread -Wall -UNAME_P := $(shell uname -p) +UNAME_M := $(shell uname -m) # Always build 32-bit tests all: all_32 # If we're on a 64-bit host, build 64-bit tests as well -ifeq ($(shell uname -p),x86_64) +ifeq ($(UNAME_M),x86_64) all: all_64 endif From 1872d01ab4be0567ad6145070d9a5bee0f923b2f Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Tue, 21 Apr 2015 15:51:45 -0700 Subject: [PATCH 485/652] selftest/x86: have no dependency on all when cross building If the CROSS_COMPILE is set remove all's dependency on all_32 and all_64. Cc: Andy Lutomirski Acked-by: Andy Lutomirski Signed-off-by: Tyler Baker Signed-off-by: Shuah Khan --- tools/testing/selftests/x86/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile index be93945bffab..ec7b088b934e 100644 --- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -7,15 +7,18 @@ BINARIES_64 := $(TARGETS_C_BOTHBITS:%=%_64) CFLAGS := -O2 -g -std=gnu99 -pthread -Wall +all: + UNAME_M := $(shell uname -m) +ifeq ($(CROSS_COMPILE),) # Always build 32-bit tests all: all_32 - # If we're on a 64-bit host, build 64-bit tests as well ifeq ($(UNAME_M),x86_64) all: all_64 endif +endif all_32: check_build32 $(BINARIES_32) From 07620abec867209a02aa51c424dbd35980480438 Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Tue, 21 Apr 2015 15:51:58 -0700 Subject: [PATCH 486/652] selftests/x86: install tests Include lib.mk and set TEST_PROGS where appropriate. Cc: Andy Lutomirski Signed-off-by: Tyler Baker Signed-off-by: Shuah Khan --- tools/testing/selftests/x86/Makefile | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile index ec7b088b934e..4af1e487354b 100644 --- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -14,9 +14,13 @@ UNAME_M := $(shell uname -m) ifeq ($(CROSS_COMPILE),) # Always build 32-bit tests all: all_32 +# Install 32-bit tests +TEST_PROGS += $(BINARIES_32) run_x86_tests.sh # If we're on a 64-bit host, build 64-bit tests as well ifeq ($(UNAME_M),x86_64) all: all_64 +# Install 64-bit tests +TEST_PROGS += $(BINARIES_64) endif endif @@ -24,6 +28,8 @@ all_32: check_build32 $(BINARIES_32) all_64: $(BINARIES_64) +include ../lib.mk + clean: $(RM) $(BINARIES_32) $(BINARIES_64) From c1e6e5cb941b54c2e7e84d9a796c1ad8377f44da Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Mon, 11 May 2015 15:11:35 -0700 Subject: [PATCH 487/652] selftests, x86: Remove useless run_tests rule Now that selftests/x86 uses the kselftest infrastructure, the run_x86_tests.sh mechanism is just in the way. Signed-off-by: Andy Lutomirski Signed-off-by: Shuah Khan --- tools/testing/selftests/x86/Makefile | 7 ++----- tools/testing/selftests/x86/run_x86_tests.sh | 13 ------------- 2 files changed, 2 insertions(+), 18 deletions(-) delete mode 100644 tools/testing/selftests/x86/run_x86_tests.sh diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile index 4af1e487354b..fe635399a3a6 100644 --- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -1,4 +1,4 @@ -.PHONY: all all_32 all_64 check_build32 clean run_tests +.PHONY: all all_32 all_64 check_build32 clean TARGETS_C_BOTHBITS := sigreturn single_step_syscall @@ -15,7 +15,7 @@ ifeq ($(CROSS_COMPILE),) # Always build 32-bit tests all: all_32 # Install 32-bit tests -TEST_PROGS += $(BINARIES_32) run_x86_tests.sh +TEST_PROGS += $(BINARIES_32) # If we're on a 64-bit host, build 64-bit tests as well ifeq ($(UNAME_M),x86_64) all: all_64 @@ -33,9 +33,6 @@ include ../lib.mk clean: $(RM) $(BINARIES_32) $(BINARIES_64) -run_tests: - ./run_x86_tests.sh - $(TARGETS_C_BOTHBITS:%=%_32): %_32: %.c $(CC) -m32 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl diff --git a/tools/testing/selftests/x86/run_x86_tests.sh b/tools/testing/selftests/x86/run_x86_tests.sh deleted file mode 100644 index 3fc19b376812..000000000000 --- a/tools/testing/selftests/x86/run_x86_tests.sh +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/bash - -# This is deliberately minimal. IMO kselftests should provide a standard -# script here. -./sigreturn_32 || exit 1 -./single_step_syscall_32 || exit 1 - -if [[ "$uname -p" -eq "x86_64" ]]; then - ./sigreturn_64 || exit 1 - ./single_step_syscall_64 || exit 1 -fi - -exit 0 From e9886ace222eb48bb57bd541320056ca334bd3a0 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Mon, 11 May 2015 15:11:36 -0700 Subject: [PATCH 488/652] selftests, x86: Rework x86 target architecture detection We currently fail to build on a non-multilib x86_64 target. We print a helpful error, but it's nicer to allow the build to succeed. Fix it and improve cross-compilation support by detecting architecture support directly and building only the relevant tests. Signed-off-by: Andy Lutomirski Signed-off-by: Shuah Khan --- tools/testing/selftests/x86/Makefile | 55 ++++++++++--------- tools/testing/selftests/x86/check_cc.sh | 16 ++++++ .../selftests/x86/trivial_32bit_program.c | 4 ++ .../selftests/x86/trivial_64bit_program.c | 18 ++++++ 4 files changed, 67 insertions(+), 26 deletions(-) create mode 100755 tools/testing/selftests/x86/check_cc.sh create mode 100644 tools/testing/selftests/x86/trivial_64bit_program.c diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile index fe635399a3a6..5bdb781163d1 100644 --- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -1,4 +1,8 @@ -.PHONY: all all_32 all_64 check_build32 clean +all: + +include ../lib.mk + +.PHONY: all all_32 all_64 warn_32bit_failure clean TARGETS_C_BOTHBITS := sigreturn single_step_syscall @@ -7,29 +11,24 @@ BINARIES_64 := $(TARGETS_C_BOTHBITS:%=%_64) CFLAGS := -O2 -g -std=gnu99 -pthread -Wall -all: - UNAME_M := $(shell uname -m) +CAN_BUILD_I386 := $(shell ./check_cc.sh $(CC) trivial_32bit_program.c -m32) +CAN_BUILD_X86_64 := $(shell ./check_cc.sh $(CC) trivial_64bit_program.c) -ifeq ($(CROSS_COMPILE),) -# Always build 32-bit tests +ifeq ($(CAN_BUILD_I386),1) all: all_32 -# Install 32-bit tests TEST_PROGS += $(BINARIES_32) -# If we're on a 64-bit host, build 64-bit tests as well -ifeq ($(UNAME_M),x86_64) +endif + +ifeq ($(CAN_BUILD_X86_64),1) all: all_64 -# Install 64-bit tests TEST_PROGS += $(BINARIES_64) endif -endif -all_32: check_build32 $(BINARIES_32) +all_32: $(BINARIES_32) all_64: $(BINARIES_64) -include ../lib.mk - clean: $(RM) $(BINARIES_32) $(BINARIES_64) @@ -39,16 +38,20 @@ $(TARGETS_C_BOTHBITS:%=%_32): %_32: %.c $(TARGETS_C_BOTHBITS:%=%_64): %_64: %.c $(CC) -m64 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl -check_build32: - @if ! $(CC) -m32 -o /dev/null trivial_32bit_program.c; then \ - echo "Warning: you seem to have a broken 32-bit build" 2>&1; \ - echo "environment. If you are using a Debian-like"; \ - echo " distribution, try:"; \ - echo ""; \ - echo " apt-get install gcc-multilib libc6-i386 libc6-dev-i386"; \ - echo ""; \ - echo "If you are using a Fedora-like distribution, try:"; \ - echo ""; \ - echo " yum install glibc-devel.*i686"; \ - exit 1; \ - fi +# x86_64 users should be encouraged to install 32-bit libraries +ifeq ($(CAN_BUILD_I386)$(CAN_BUILD_X86_64),01) +all: warn_32bit_failure + +warn_32bit_failure: + @echo "Warning: you seem to have a broken 32-bit build" 2>&1; \ + echo "environment. This will reduce test coverage of 64-bit" 2>&1; \ + echo "kernels. If you are using a Debian-like distribution," 2>&1; \ + echo "try:"; 2>&1; \ + echo ""; \ + echo " apt-get install gcc-multilib libc6-i386 libc6-dev-i386"; \ + echo ""; \ + echo "If you are using a Fedora-like distribution, try:"; \ + echo ""; \ + echo " yum install glibc-devel.*i686"; \ + exit 0; +endif diff --git a/tools/testing/selftests/x86/check_cc.sh b/tools/testing/selftests/x86/check_cc.sh new file mode 100755 index 000000000000..172d3293fb7b --- /dev/null +++ b/tools/testing/selftests/x86/check_cc.sh @@ -0,0 +1,16 @@ +#!/bin/sh +# check_cc.sh - Helper to test userspace compilation support +# Copyright (c) 2015 Andrew Lutomirski +# GPL v2 + +CC="$1" +TESTPROG="$2" +shift 2 + +if "$CC" -o /dev/null "$TESTPROG" -O0 "$@" 2>/dev/null; then + echo 1 +else + echo 0 +fi + +exit 0 diff --git a/tools/testing/selftests/x86/trivial_32bit_program.c b/tools/testing/selftests/x86/trivial_32bit_program.c index 2e231beb0a39..fabdf0f51621 100644 --- a/tools/testing/selftests/x86/trivial_32bit_program.c +++ b/tools/testing/selftests/x86/trivial_32bit_program.c @@ -4,6 +4,10 @@ * GPL v2 */ +#ifndef __i386__ +# error wrong architecture +#endif + #include int main() diff --git a/tools/testing/selftests/x86/trivial_64bit_program.c b/tools/testing/selftests/x86/trivial_64bit_program.c new file mode 100644 index 000000000000..b994946c40fb --- /dev/null +++ b/tools/testing/selftests/x86/trivial_64bit_program.c @@ -0,0 +1,18 @@ +/* + * Trivial program to check that we have a valid 32-bit build environment. + * Copyright (c) 2015 Andy Lutomirski + * GPL v2 + */ + +#ifndef __x86_64__ +# error wrong architecture +#endif + +#include + +int main() +{ + printf("\n"); + + return 0; +} From 343f845b375989f1753f605902931fa939aa2223 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Mon, 11 May 2015 23:25:16 -0700 Subject: [PATCH 489/652] x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions FROM_BE16: 'ror %reg, 8' doesn't clear upper bits of the register, so use additional 'movzwl' insn to zero extend 16 bits into 64 FROM_LE16: should zero extend lower 16 bits into 64 bit FROM_LE32: should zero extend lower 32 bits into 64 bit Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- arch/x86/net/bpf_jit_comp.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 987514396c1e..99f76103c6b7 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -559,6 +559,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, if (is_ereg(dst_reg)) EMIT1(0x41); EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8); + + /* emit 'movzwl eax, ax' */ + if (is_ereg(dst_reg)) + EMIT3(0x45, 0x0F, 0xB7); + else + EMIT2(0x0F, 0xB7); + EMIT1(add_2reg(0xC0, dst_reg, dst_reg)); break; case 32: /* emit 'bswap eax' to swap lower 4 bytes */ @@ -577,6 +584,27 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, break; case BPF_ALU | BPF_END | BPF_FROM_LE: + switch (imm32) { + case 16: + /* emit 'movzwl eax, ax' to zero extend 16-bit + * into 64 bit + */ + if (is_ereg(dst_reg)) + EMIT3(0x45, 0x0F, 0xB7); + else + EMIT2(0x0F, 0xB7); + EMIT1(add_2reg(0xC0, dst_reg, dst_reg)); + break; + case 32: + /* emit 'mov eax, eax' to clear upper 32-bits */ + if (is_ereg(dst_reg)) + EMIT1(0x45); + EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg)); + break; + case 64: + /* nop */ + break; + } break; /* ST: *(u8*)(dst_reg + off) = imm */ From 44d4f8d74e1dd07f248f35d74419f07d44f326e6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 12 May 2015 08:06:15 +0200 Subject: [PATCH 490/652] net: ll_temac: Fix DMA map size bug DMA allocates skb->len instead of headlen which is used for DMA. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/ll_temac_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 690a4c36b316..af2694dc6f90 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -707,8 +707,8 @@ static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev) cur_p->app0 |= STS_CTRL_APP0_SOP; cur_p->len = skb_headlen(skb); - cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len, - DMA_TO_DEVICE); + cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); cur_p->app4 = (unsigned long)skb; for (ii = 0; ii < num_frag; ii++) { From bced870152161435cc59a53e77f3699f8e8f22ca Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 12 May 2015 09:43:14 +0200 Subject: [PATCH 491/652] net: phy: micrel: Fix regression in kszphy_probe Don't do clock-mode-select if clk == NULL, since when building without CONFIG_HAVE_CLK, clk_get returns NULL and clk_get_rate returns 0. Doing clock-mode-select in this cause causes kszphy_probe to return -EINVAL and thus prevents the device from being probed. The original code (before regression) would return 0 when building without CONFIG_HAVE_CLK. Cc: stable # 3.18+ Fixes: 1fadee0c3645 ("net/phy: micrel: Add clock support for KSZ8021/KSZ8031") Reviewed-by: Fabio Estevam Reviewed-by: Johan Hovold Signed-off-by: Niklas Cassel Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 1190fd8f0088..ebdc357c5131 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -548,7 +548,8 @@ static int kszphy_probe(struct phy_device *phydev) } clk = devm_clk_get(&phydev->dev, "rmii-ref"); - if (!IS_ERR(clk)) { + /* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */ + if (!IS_ERR_OR_NULL(clk)) { unsigned long rate = clk_get_rate(clk); bool rmii_ref_clk_sel_25_mhz; From 5684044f8062617dcc45ed8b2fb3ec6e02f14370 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 12 May 2015 09:36:59 -0600 Subject: [PATCH 492/652] e1000e: Add pm_qos header Commit e2c6544829f moved pm_qos_req to e1000_adapter. Add the header file that defines the struct. Signed-off-by: David Ahern Cc: Thomas Graf Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/e1000.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 5d9ceb17b4cb..0abc942c966e 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -40,6 +40,7 @@ #include #include #include +#include #include "hw.h" struct e1000_info; From 01d460dd70adc858e15307332832183c622bee50 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 12 May 2015 09:37:00 -0600 Subject: [PATCH 493/652] net: Remove remaining remnants of pm_qos from netdevice.h Commit e2c6544829f removed pm_qos from struct net_device but left the comment and header file. Remove those. Signed-off-by: David Ahern Cc: Thomas Graf Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 1899c74a7127..05b9a694e213 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -25,7 +25,6 @@ #ifndef _LINUX_NETDEVICE_H #define _LINUX_NETDEVICE_H -#include #include #include #include @@ -1499,8 +1498,6 @@ enum netdev_priv_flags { * * @qdisc_tx_busylock: XXX: need comments on this one * - * @pm_qos_req: Power Management QoS object - * * FIXME: cleanup struct net_device such that network protocol info * moves out. */ From f60b8d449d850ae4aa3ee4fdaefec6b7882c92f7 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Thu, 30 Apr 2015 15:36:48 +0200 Subject: [PATCH 494/652] s390/zcrypt: Fix invalid domain handling during ap module unload Added domain checking to prevent reset failures caused by invalid domains. Corrected removal sequence of bus attributes and device. Reviewed-by: Harald Freudenberger Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 6e506a88f43e..3ba611419759 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1950,7 +1950,7 @@ static void ap_reset_domain(void) { int i; - if (ap_domain_index != -1) + if ((ap_domain_index != -1) && (ap_test_config_domain(ap_domain_index))) for (i = 0; i < AP_DEVICES; i++) ap_reset_queue(AP_MKQID(i, ap_domain_index)); } @@ -2095,7 +2095,6 @@ void ap_module_exit(void) hrtimer_cancel(&ap_poll_timer); destroy_workqueue(ap_work_queue); tasklet_kill(&ap_tasklet); - root_device_unregister(ap_root_device); while ((dev = bus_find_device(&ap_bus_type, NULL, NULL, __ap_match_all))) { @@ -2104,6 +2103,7 @@ void ap_module_exit(void) } for (i = 0; ap_bus_attrs[i]; i++) bus_remove_file(&ap_bus_type, ap_bus_attrs[i]); + root_device_unregister(ap_root_device); bus_unregister(&ap_bus_type); unregister_reset_call(&ap_reset_call); if (ap_using_interrupts()) From c431761dddff87039edb3300b9b29d1f9e0af2c9 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Mon, 4 May 2015 13:27:49 +0200 Subject: [PATCH 495/652] s390/crypto: fix stckf loop The store-clock-fast loop in generate_entropy() mixes (exors) only the first 64 bytes of the initial page before doing the first SHA256. Fix the loop to mix the store-clock-fast values all over the page. Signed-off-by: Harald Freudenberger Reported-by: David Binderman Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/prng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 1f374b39a4ec..9d5192c94963 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -125,7 +125,7 @@ static int generate_entropy(u8 *ebuf, size_t nbytes) /* fill page with urandom bytes */ get_random_bytes(pg, PAGE_SIZE); /* exor page with stckf values */ - for (n = 0; n < sizeof(PAGE_SIZE/sizeof(u64)); n++) { + for (n = 0; n < PAGE_SIZE / sizeof(u64); n++) { u64 *p = ((u64 *)pg) + n; *p ^= get_tod_clock_fast(); } From 0b7dc0ff95237a53287e52f1aab7408ebf1c4085 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 13 May 2015 17:45:52 +0900 Subject: [PATCH 496/652] ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider ERR_PTR was dereferenced during sub domain parsing, if parent domain could not be obtained (because of invalid phandle or deferred registration of parent domain). The Exynos power domain code checked whether of_genpd_get_from_provider() returned NULL and in that case it skipped that power domain node. However this function returns ERR_PTR or valid pointer, not NULL. Fixes: 0f7807518fe1 ("ARM: EXYNOS: add support for sub-power domains") Cc: [4.0+] Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm_domains.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index cbe56b35aea0..a9686535f9ed 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -188,7 +188,7 @@ no_clk: args.np = np; args.args_count = 0; child_domain = of_genpd_get_from_provider(&args); - if (!child_domain) + if (IS_ERR(child_domain)) continue; if (of_parse_phandle_with_args(np, "power-domains", @@ -196,7 +196,7 @@ no_clk: continue; parent_domain = of_genpd_get_from_provider(&args); - if (!parent_domain) + if (IS_ERR(parent_domain)) continue; if (pm_genpd_add_subdomain(parent_domain, child_domain)) From 9cf82e72ec449b4516843377ac7a20abe300c64f Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Sat, 9 May 2015 22:06:54 +0200 Subject: [PATCH 497/652] irqchip: tegra: Set the proper base address in irq chip data The irq chip functions use the irq chipdata directly as the base register address of the controller, so this should be passed in instead of a pointer to the array address holding the base address. This fixes Tegra20 CPUidle as now the un-/masking of IRQs at the LIC level works again, but more importantly it fixes the resulting memory corruption. Fixes: de3ce0804916 ' irqchip: tegra: Add DT-based support for legacy interrupt controller' Signed-off-by: Lucas Stach Cc: Stephen Warren Cc: Thierry Reding Cc: Alexandre Courbot Cc: Jason Cooper Cc: Marc Zyngier Link: http://lkml.kernel.org/r/1431202014-3136-1-git-send-email-dev@lynxeye.de Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-tegra.c b/drivers/irqchip/irq-tegra.c index 51c485d9a877..f67bbd80433e 100644 --- a/drivers/irqchip/irq-tegra.c +++ b/drivers/irqchip/irq-tegra.c @@ -264,7 +264,7 @@ static int tegra_ictlr_domain_alloc(struct irq_domain *domain, irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, &tegra_ictlr_chip, - &info->base[ictlr]); + info->base[ictlr]); } parent_args = *args; From d1e40e592678b8955a8ed36bdeaf42929822302e Mon Sep 17 00:00:00 2001 From: Eunbong Song Date: Fri, 24 Apr 2015 04:36:27 +0000 Subject: [PATCH 498/652] tools/liblockdep: Fix linker error in case of cross compile If we try to cross compile liblockdep, even if we set the CROSS_COMPILE variable the linker error can occur because LD is not set with CROSS_COMPILE. This patch adds "LD" can be set automatically with CROSS_COMPILE variable so fixes linker error problem. Signed-off-by: Eunbong Song Signed-off-by: Sasha Levin --- tools/lib/lockdep/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/lib/lockdep/Makefile b/tools/lib/lockdep/Makefile index 0c356fb65022..18ffccf00426 100644 --- a/tools/lib/lockdep/Makefile +++ b/tools/lib/lockdep/Makefile @@ -14,9 +14,10 @@ define allow-override $(eval $(1) = $(2))) endef -# Allow setting CC and AR, or setting CROSS_COMPILE as a prefix. +# Allow setting CC and AR and LD, or setting CROSS_COMPILE as a prefix. $(call allow-override,CC,$(CROSS_COMPILE)gcc) $(call allow-override,AR,$(CROSS_COMPILE)ar) +$(call allow-override,LD,$(CROSS_COMPILE)ld) INSTALL = install From 2480257fb17ba0fdaf62bc8c2406bd08d5e7f8f1 Mon Sep 17 00:00:00 2001 From: Eunbong Song Date: Wed, 13 May 2015 06:02:32 -0400 Subject: [PATCH 499/652] tools/liblockdep: Fix compilation error Recent changes to kernel/locking/lockdep.c broke the liblockdep build. Fix that. Signed-off-by: Eunbong Song Signed-off-by: Sasha Levin --- tools/lib/lockdep/uinclude/linux/kernel.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/lib/lockdep/uinclude/linux/kernel.h b/tools/lib/lockdep/uinclude/linux/kernel.h index a11e3c357be7..cd2cc59a5da7 100644 --- a/tools/lib/lockdep/uinclude/linux/kernel.h +++ b/tools/lib/lockdep/uinclude/linux/kernel.h @@ -28,6 +28,9 @@ #define __init #define noinline #define list_add_tail_rcu list_add_tail +#define list_for_each_entry_rcu list_for_each_entry +#define barrier() +#define synchronize_sched() #ifndef CALLER_ADDR0 #define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) From 849eca7b9dae0364e2fbe8afdf0fb610d12c9c8f Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Tue, 12 May 2015 10:00:00 -0700 Subject: [PATCH 500/652] HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switch Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing errors: [791759.606542] usb 1-5.4: input irq status -75 received [791759.614537] usb 1-5.4: input irq status -75 received [791759.622542] usb 1-5.4: input irq status -75 received Add it. Signed-off-by: Laura Abbott Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 41f167e4d75f..7ce93d927f62 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -164,6 +164,7 @@ #define USB_DEVICE_ID_ATEN_2PORTKVM 0x2204 #define USB_DEVICE_ID_ATEN_4PORTKVM 0x2205 #define USB_DEVICE_ID_ATEN_4PORTKVMC 0x2208 +#define USB_DEVICE_ID_ATEN_CS682 0x2213 #define USB_VENDOR_ID_ATMEL 0x03eb #define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index a775143e6265..4696895eb708 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -61,6 +61,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET }, From 3f937cf3db466093c533efbcd601952509727a9d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 13 May 2015 15:47:03 +0200 Subject: [PATCH 501/652] Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs" This reverts commit b403125d3bbf8046c1186e1a49cb17bb5551db14. As reported by Chris, both commits b403125 "ARM: rockchip: fix undefined instruction of reset_ctrl_regs" 0ea001d "ARM: rockchip: disable dapswjdp during suspend" actually fix the same issue and b403125 is the older one, which got superseded by 0ea001d. Therefore revert the obsolete one again. Reported-by: Chris Zhong Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/pm.c | 26 -------------------------- arch/arm/mach-rockchip/pm.h | 4 ---- 2 files changed, 30 deletions(-) diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 22812fe06460..b0dcbe28f78c 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -44,11 +44,9 @@ static void __iomem *rk3288_bootram_base; static phys_addr_t rk3288_bootram_phy; static struct regmap *pmu_regmap; -static struct regmap *grf_regmap; static struct regmap *sgrf_regmap; static u32 rk3288_pmu_pwr_mode_con; -static u32 rk3288_grf_soc_con0; static u32 rk3288_sgrf_soc_con0; static inline u32 rk3288_l2_config(void) @@ -72,25 +70,11 @@ static void rk3288_slp_mode_set(int level) { u32 mode_set, mode_set1; - regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0); - regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0); regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, &rk3288_pmu_pwr_mode_con); - /* - * We need set this bit GRF_FORCE_JTAG here, for the debug module, - * otherwise, it may become inaccessible after resume. - * This creates a potential security issue, as the sdmmc pins may - * accept jtag data for a short time during resume if no card is - * inserted. - * But this is of course also true for the regular boot, before we - * turn of the jtag/sdmmc autodetect. - */ - regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG | - GRF_FORCE_JTAG_WRITE); - /* * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR * PCLK_WDT_GATE - disable WDT during suspend. @@ -151,9 +135,6 @@ static void rk3288_slp_mode_set_resume(void) regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); - - regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 | - GRF_FORCE_JTAG_WRITE); } static int rockchip_lpmode_enter(unsigned long arg) @@ -212,13 +193,6 @@ static int rk3288_suspend_init(struct device_node *np) return PTR_ERR(pmu_regmap); } - grf_regmap = syscon_regmap_lookup_by_compatible( - "rockchip,rk3288-grf"); - if (IS_ERR(grf_regmap)) { - pr_err("%s: could not find grf regmap\n", __func__); - return PTR_ERR(pmu_regmap); - } - sram_np = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu-sram"); if (!sram_np) { diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index f8a747bc1437..3e8d39c0c3d5 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -48,10 +48,6 @@ static inline void rockchip_suspend_init(void) #define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44 #define RK3288_PMU_PWRMODE_CON1 0x90 -#define RK3288_GRF_SOC_CON0 0x244 -#define GRF_FORCE_JTAG BIT(12) -#define GRF_FORCE_JTAG_WRITE BIT(28) - #define RK3288_SGRF_SOC_CON0 (0x0000) #define RK3288_SGRF_FAST_BOOT_ADDR (0x0120) #define SGRF_PCLK_WDT_GATE BIT(6) From 3fd61b209977db8a9fe6c44d5a5a7aee7a255f64 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 8 May 2015 18:00:26 +0200 Subject: [PATCH 502/652] nvme: fix kernel memory corruption with short INQUIRY buffers If userspace asks for an INQUIRY buffer smaller than 36 bytes, the SCSI translation layer will happily write past the end of the INQUIRY buffer allocation. This is fairly easily reproducible by running the libiscsi test suite and then starting an xfstests run. Fixes: 4f1982 ("NVMe: Update SCSI Inquiry VPD 83h translation") Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/block/nvme-scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c index 88f13c525712..44f2514fb775 100644 --- a/drivers/block/nvme-scsi.c +++ b/drivers/block/nvme-scsi.c @@ -2257,7 +2257,8 @@ static int nvme_trans_inquiry(struct nvme_ns *ns, struct sg_io_hdr *hdr, page_code = GET_INQ_PAGE_CODE(cmd); alloc_len = GET_INQ_ALLOC_LENGTH(cmd); - inq_response = kmalloc(alloc_len, GFP_KERNEL); + inq_response = kmalloc(max(alloc_len, STANDARD_INQUIRY_LENGTH), + GFP_KERNEL); if (inq_response == NULL) { res = -ENOMEM; goto out_mem; From 22ffc3e42aa6a656192a45c7364fbb2de3214d93 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 4 May 2015 12:45:38 -0700 Subject: [PATCH 503/652] Input: sx8654 - fix memory allocation check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have been testing wrong variable when trying to make sure that input allocation succeeded. Reported by Coverity (CID 1295918). Acked-by: Sébastien Szymanski Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/sx8654.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c index aecb9ad2e701..642f4a53de50 100644 --- a/drivers/input/touchscreen/sx8654.c +++ b/drivers/input/touchscreen/sx8654.c @@ -187,7 +187,7 @@ static int sx8654_probe(struct i2c_client *client, return -ENOMEM; input = devm_input_allocate_device(&client->dev); - if (!sx8654) + if (!input) return -ENOMEM; input->name = "SX8654 I2C Touchscreen"; From 3c0213d17a09601e0c6c0ae0e27caf70d988290f Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 23 Apr 2015 09:08:43 -0700 Subject: [PATCH 504/652] Input: elantech - fix semi-mt protocol for v3 HW When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 991dc6b20a58..79363b687195 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -315,7 +315,7 @@ static void elantech_report_semi_mt_data(struct input_dev *dev, unsigned int x2, unsigned int y2) { elantech_set_slot(dev, 0, num_fingers != 0, x1, y1); - elantech_set_slot(dev, 1, num_fingers == 2, x2, y2); + elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2); } /* From 6b19687563fa6f385ac314afa30b7579e8c3174c Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 6 May 2015 18:26:58 -0400 Subject: [PATCH 505/652] nfs: stat(2) fails during cthon04 basic test5 on NFSv4.0 When running the Connectathon basic tests against a Solaris NFS server over NFSv4.0, test5 reports that stat(2) returns a file size of zero instead of 1MB. On success, nfs_commit_inode() can return a positive result; see other call sites such as nfs_file_fsync_commit() and nfs_commit_unstable_pages(). The call site recently added in nfs_wb_all() does not prevent that positive return value from leaking to its callers. If it leaks through nfs_sync_inode() back to nfs_getattr(), that causes stat(2) to return a positive return value to user space while also not filling in the passed-in struct stat. Additional clean up: the new logic in nfs_wb_all() is rewritten in bfields-normal form. Fixes: 5bb89b4702e2 ("NFSv4.1/pnfs: Separate out metadata . . .") Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index d12a4be613a5..dfc19f1575a1 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1845,12 +1845,15 @@ int nfs_wb_all(struct inode *inode) trace_nfs_writeback_inode_enter(inode); ret = filemap_write_and_wait(inode->i_mapping); - if (!ret) { - ret = nfs_commit_inode(inode, FLUSH_SYNC); - if (!ret) - pnfs_sync_inode(inode, true); - } + if (ret) + goto out; + ret = nfs_commit_inode(inode, FLUSH_SYNC); + if (ret < 0) + goto out; + pnfs_sync_inode(inode, true); + ret = 0; +out: trace_nfs_writeback_inode_exit(inode, ret); return ret; } From feaff8e5b2cfc3eae02cf65db7a400b0b9ffc596 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 12 May 2015 15:48:10 -0400 Subject: [PATCH 506/652] nfs: take extra reference to fl->fl_file when running a setlk We had a report of a crash while stress testing the NFS client: BUG: unable to handle kernel NULL pointer dereference at 0000000000000150 IP: [] locks_get_lock_context+0x8/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_filter ebtable_broute bridge stp llc ebtables ip6table_security ip6table_mangle ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_raw ip6table_filter ip6_tables iptable_security iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_raw coretemp crct10dif_pclmul ppdev crc32_pclmul crc32c_intel ghash_clmulni_intel vmw_balloon serio_raw vmw_vmci i2c_piix4 shpchp parport_pc acpi_cpufreq parport nfsd auth_rpcgss nfs_acl lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi scsi_transport_spi mptscsih mptbase e1000 ata_generic pata_acpi CPU: 1 PID: 399 Comm: kworker/1:1H Not tainted 4.1.0-0.rc1.git0.1.fc23.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/30/2013 Workqueue: rpciod rpc_async_schedule [sunrpc] task: ffff880036aea7c0 ti: ffff8800791f4000 task.ti: ffff8800791f4000 RIP: 0010:[] [] locks_get_lock_context+0x8/0x90 RSP: 0018:ffff8800791f7c00 EFLAGS: 00010293 RAX: ffff8800791f7c40 RBX: ffff88001f2ad8c0 RCX: ffffe8ffffc80305 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8800791f7c88 R08: ffff88007fc971d8 R09: 279656d600000000 R10: 0000034a01000000 R11: 279656d600000000 R12: ffff88001f2ad918 R13: ffff88001f2ad8c0 R14: 0000000000000000 R15: 0000000100e73040 FS: 0000000000000000(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 0000000001c0b000 CR4: 00000000000407e0 Stack: ffffffff8127c5b0 ffff8800791f7c18 ffffffffa0171e29 ffff8800791f7c58 ffffffffa0171ef8 ffff8800791f7c78 0000000000000246 ffff88001ea0ba00 ffff8800791f7c40 ffff8800791f7c40 00000000ff5d86a3 ffff8800791f7ca8 Call Trace: [] ? __posix_lock_file+0x40/0x760 [] ? rpc_make_runnable+0x99/0xa0 [sunrpc] [] ? rpc_wake_up_task_queue_locked.part.35+0xc8/0x250 [sunrpc] [] posix_lock_file_wait+0x4a/0x120 [] ? nfs41_wake_and_assign_slot+0x32/0x40 [nfsv4] [] ? nfs41_sequence_done+0xd8/0x2d0 [nfsv4] [] do_vfs_lock+0x2d/0x30 [nfsv4] [] nfs4_lock_done+0x1ad/0x210 [nfsv4] [] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [] rpc_exit_task+0x2c/0xa0 [sunrpc] [] ? call_refreshresult+0x150/0x150 [sunrpc] [] __rpc_execute+0x90/0x460 [sunrpc] [] rpc_async_schedule+0x15/0x20 [sunrpc] [] process_one_work+0x1bb/0x410 [] worker_thread+0x53/0x480 [] ? process_one_work+0x410/0x410 [] ? process_one_work+0x410/0x410 [] kthread+0xd8/0xf0 [] ? kthread_worker_fn+0x180/0x180 [] ret_from_fork+0x42/0x70 [] ? kthread_worker_fn+0x180/0x180 Jean says: "Running locktests with a large number of iterations resulted in a client crash. The test run took a while and hasn't finished after close to 2 hours. The crash happened right after I gave up and killed the test (after 107m) with Ctrl+C." The crash happened because a NULL inode pointer got passed into locks_get_lock_context. The call chain indicates that file_inode(filp) returned NULL, which means that f_inode was NULL. Since that's zeroed out in __fput, that suggests that this filp pointer outlived the last reference. Looking at the code, that seems possible. We copy the struct file_lock that's passed in, but if the task is signalled at an inopportune time we can end up trying to use that file_lock in rpciod context after the process that requested it has already returned (and possibly put its filp reference). Fix this by taking an extra reference to the filp when we allocate the lock info, and put it in nfs4_lock_release. Reported-by: Jean Spector Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 45b35b9b1e36..55e1e3af23a3 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -5604,6 +5605,7 @@ static struct nfs4_lockdata *nfs4_alloc_lockdata(struct file_lock *fl, p->server = server; atomic_inc(&lsp->ls_count); p->ctx = get_nfs_open_context(ctx); + get_file(fl->fl_file); memcpy(&p->fl, fl, sizeof(p->fl)); return p; out_free_seqid: @@ -5716,6 +5718,7 @@ static void nfs4_lock_release(void *calldata) nfs_free_seqid(data->arg.lock_seqid); nfs4_put_lock_state(data->lsp); put_nfs_open_context(data->ctx); + fput(data->fl.fl_file); kfree(data); dprintk("%s: done!\n", __func__); } From ca79f232054abd079648fdb4400c71a1310f7bc8 Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Wed, 13 May 2015 11:39:24 +0800 Subject: [PATCH 507/652] Bluetooth: ath3k: Add a new ID 0cf3:e006 to ath3k list Device info in /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e006 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Marcel Holtmann --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 288547a3c566..9a05153e1224 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -104,6 +104,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0cf3, 0xe003) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0CF3, 0xE005) }, + { USB_DEVICE(0x0CF3, 0xE006) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x13d3, 0x3393) }, @@ -158,6 +159,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d21f3b4176d3..13d2cae3e13d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -202,6 +202,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, From 2054111b107d9449393d96dce6b66731bbfea9ad Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Wed, 13 May 2015 11:39:25 +0800 Subject: [PATCH 508/652] Bluetooth: btusb: Add support for 0cf3:e007 Device 0cf3:e007 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 13d2cae3e13d..7da7efc2cd67 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -219,6 +219,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, /* QCA ROME chipset */ + { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME }, From ec0810d2ac1c932dad48f45da67e3adc5c5449a1 Mon Sep 17 00:00:00 2001 From: Dmitry Tunin Date: Sat, 2 May 2015 13:36:58 +0300 Subject: [PATCH 509/652] Bluetooth: ath3k: add support of 04ca:300f AR3012 device BugLink: https://bugs.launchpad.net/bugs/1449730 T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin Signed-off-by: Marcel Holtmann --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 9a05153e1224..8c81af6dbe06 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -88,6 +88,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3007) }, { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x04CA, 0x300b) }, + { USB_DEVICE(0x04CA, 0x300f) }, { USB_DEVICE(0x04CA, 0x3010) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0930, 0x0220) }, @@ -144,6 +145,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7da7efc2cd67..3c10d4dfe9a7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -186,6 +186,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, From 6f024978e74bda616b27183adee029b65eb27032 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 11 Mar 2015 11:13:57 +0100 Subject: [PATCH 510/652] ARM: EXYNOS: Fix failed second suspend on Exynos4 On Exynos4412 boards (Trats2, Odroid U3) after enabling L2 cache in 56b60b8bce4a ("ARM: 8265/1: dts: exynos4: Add nodes for L2 cache controller") the second suspend to RAM failed. First suspend worked fine but the next one hang just after powering down of secondary CPUs (system consumed energy as it would be running but was not responsive). The issue was caused by enabling delayed reset assertion for CPU0 just after issuing power down of cores. This was introduced for Exynos4 in 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off"). The whole behavior is not well documented but after checking with vendor code this should be done like this (on Exynos4): 1. Enable delayed reset assertion when system is running (for all CPUs). 2. Disable delayed reset assertion before suspending the system. This can be done after powering off secondary CPUs. 3. Re-enable the delayed reset assertion when system is resumed. Fixes: 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off") Cc: Signed-off-by: Krzysztof Kozlowski Tested-by: Bartlomiej Zolnierkiewicz Tested-by: Chanwoo Choi Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.h | 2 ++ arch/arm/mach-exynos/exynos.c | 27 +++++++++++++++++++++++ arch/arm/mach-exynos/platsmp.c | 39 ++-------------------------------- arch/arm/mach-exynos/suspend.c | 3 +++ 4 files changed, 34 insertions(+), 37 deletions(-) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index acd5b560b728..5f5cd562c593 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -159,6 +159,8 @@ extern void exynos_enter_aftr(void); extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data; +extern void exynos_set_delayed_reset_assertion(bool enable); + extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); extern void __iomem *cpu_boot_reg_base(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index bcde0dd668df..c3bfbba3006d 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -166,6 +166,33 @@ static void __init exynos_init_io(void) exynos_map_io(); } +/* + * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code + * and suspend. + * + * This is necessary only on Exynos4 SoCs. When system is running + * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down + * feature could properly detect global idle state when secondary CPU is + * powered down. + * + * However this should not be set when such system is going into suspend. + */ +void exynos_set_delayed_reset_assertion(bool enable) +{ + if (soc_is_exynos4()) { + unsigned int tmp, core_id; + + for (core_id = 0; core_id < num_possible_cpus(); core_id++) { + tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id)); + if (enable) + tmp |= S5P_USE_DELAYED_RESET_ASSERTION; + else + tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION); + pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id)); + } + } +} + /* * Apparently, these SoCs are not able to wake-up from suspend using * the PMU. Too bad. Should they suddenly become capable of such a diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index ebd135bb0995..a825bca2a2b6 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -34,30 +34,6 @@ extern void exynos4_secondary_startup(void); -/* - * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs - * during hot-(un)plugging CPUx. - * - * The feature can be cleared safely during first boot of secondary CPU. - * - * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering - * down a CPU so the CPU idle clock down feature could properly detect global - * idle state when CPUx is off. - */ -static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable) -{ - if (soc_is_exynos4()) { - unsigned int tmp; - - tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id)); - if (enable) - tmp |= S5P_USE_DELAYED_RESET_ASSERTION; - else - tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION); - pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id)); - } -} - #ifdef CONFIG_HOTPLUG_CPU static inline void cpu_leave_lowpower(u32 core_id) { @@ -73,8 +49,6 @@ static inline void cpu_leave_lowpower(u32 core_id) : "=&r" (v) : "Ir" (CR_C), "Ir" (0x40) : "cc"); - - exynos_set_delayed_reset_assertion(core_id, false); } static inline void platform_do_lowpower(unsigned int cpu, int *spurious) @@ -87,14 +61,6 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) /* Turn the CPU off on next WFI instruction. */ exynos_cpu_power_down(core_id); - /* - * Exynos4 SoCs require setting - * USE_DELAYED_RESET_ASSERTION so the CPU idle - * clock down feature could properly detect - * global idle state when CPUx is off. - */ - exynos_set_delayed_reset_assertion(core_id, true); - wfi(); if (pen_release == core_id) { @@ -371,9 +337,6 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) udelay(10); } - /* No harm if this is called during first boot of secondary CPU */ - exynos_set_delayed_reset_assertion(core_id, false); - /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -420,6 +383,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) exynos_sysram_init(); + exynos_set_delayed_reset_assertion(true); + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index b6f3ddc3cf8e..c0b6dccbf7bd 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -342,6 +342,8 @@ static void exynos_pm_enter_sleep_mode(void) static void exynos_pm_prepare(void) { + exynos_set_delayed_reset_assertion(false); + /* Set wake-up mask registers */ exynos_pm_set_wakeup_mask(); @@ -482,6 +484,7 @@ early_wakeup: /* Clear SLEEP mode set in INFORM1 */ pmu_raw_writel(0x0, S5P_INFORM1); + exynos_set_delayed_reset_assertion(true); } static void exynos3250_pm_resume(void) From c1f0ecff492ea7c804fe543267f673eaac12259c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 14 May 2015 11:43:59 +0900 Subject: [PATCH 511/652] ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4 of_machine_is_compatible() seems to be preferred over soc_is_exynos4(). Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index c3bfbba3006d..5917a30eee33 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -179,7 +179,7 @@ static void __init exynos_init_io(void) */ void exynos_set_delayed_reset_assertion(bool enable) { - if (soc_is_exynos4()) { + if (of_machine_is_compatible("samsung,exynos4")) { unsigned int tmp, core_id; for (core_id = 0; core_id < num_possible_cpus(); core_id++) { From be346ffaad9bc354075fba5cd009fc4519abdd64 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 12 May 2015 20:53:14 -0400 Subject: [PATCH 512/652] vlan: Correctly propagate promisc|allmulti flags in notifier. Currently vlan notifier handler will try to update all vlans for a device when that device comes up. A problem occurs, however, when the vlan device was set to promiscuous, but not by the user (ex: a bridge). In that case, dev->gflags are not updated. What results is that the lower device ends up with an extra promiscuity count. Here are the backtraces that prove this: [62852.052179] [] __dev_set_promiscuity+0x38/0x1e0 [62852.052186] [] ? _raw_spin_unlock_bh+0x1b/0x40 [62852.052188] [] ? dev_set_rx_mode+0x2e/0x40 [62852.052190] [] dev_set_promiscuity+0x24/0x50 [62852.052194] [] vlan_dev_open+0xd5/0x1f0 [8021q] [62852.052196] [] __dev_open+0xbf/0x140 [62852.052198] [] __dev_change_flags+0x9d/0x170 [62852.052200] [] dev_change_flags+0x29/0x60 The above comes from the setting the vlan device to IFF_UP state. [62852.053569] [] __dev_set_promiscuity+0x38/0x1e0 [62852.053571] [] ? vlan_dev_set_rx_mode+0x2b/0x30 [8021q] [62852.053573] [] __dev_change_flags+0xe5/0x170 [62852.053645] [] dev_change_flags+0x29/0x60 [62852.053647] [] vlan_device_event+0x18a/0x690 [8021q] [62852.053649] [] notifier_call_chain+0x4c/0x70 [62852.053651] [] raw_notifier_call_chain+0x16/0x20 [62852.053653] [] call_netdevice_notifiers+0x2d/0x60 [62852.053654] [] __dev_notify_flags+0x33/0xa0 [62852.053656] [] dev_change_flags+0x52/0x60 [62852.053657] [] do_setlink+0x397/0xa40 And this one comes from the notification code. What we end up with is a vlan with promiscuity count of 1 and and a physical device with a promiscuity count of 2. They should both have a count 1. To resolve this issue, vlan code can use dev_get_flags() api which correctly masks promiscuity and allmulti flags. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/8021q/vlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 98a30a5b8664..59555f0f8fc8 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -443,7 +443,7 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event, case NETDEV_UP: /* Put all VLANs for this dev in the up state too. */ vlan_group_for_each_dev(grp, i, vlandev) { - flgs = vlandev->flags; + flgs = dev_get_flags(vlandev); if (flgs & IFF_UP) continue; From 5e95235ccd5442d4a4fe11ec4eb99ba1b7959368 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 14 May 2015 14:45:40 +1000 Subject: [PATCH 513/652] powerpc: Align TOC to 256 bytes Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in our linker script, otherwise pointers to our TOC variables (__toc_start, __prom_init_toc_start) could be incorrect. If they are bad, we die a few hundred instructions into boot. Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index f096e72262f4..1db685104ffc 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -213,6 +213,7 @@ SECTIONS *(.opd) } + . = ALIGN(256); .got : AT(ADDR(.got) - LOAD_OFFSET) { __toc_start = .; #ifndef CONFIG_RELOCATABLE From 177d0506a911eb60b38b172215df5325ed94fa64 Mon Sep 17 00:00:00 2001 From: Wesley Kuo Date: Wed, 13 May 2015 10:33:15 +0800 Subject: [PATCH 514/652] Bluetooth: Fix remote name event return directly. This patch fixes hci_remote_name_evt dose not resolve name during discovery status is RESOLVING. Before simultaneous dual mode scan enabled, hci_check_pending_name will set discovery status to STOPPED eventually. Signed-off-by: Wesley Kuo Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 4663c3dad3f5..c4802f3bd4c5 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2854,9 +2854,11 @@ static void le_scan_disable_work_complete(struct hci_dev *hdev, u8 status, * state. If we were running both LE and BR/EDR inquiry * simultaneously, and BR/EDR inquiry is already * finished, stop discovery, otherwise BR/EDR inquiry - * will stop discovery when finished. + * will stop discovery when finished. If we will resolve + * remote device name, do not change discovery state. */ - if (!test_bit(HCI_INQUIRY, &hdev->flags)) + if (!test_bit(HCI_INQUIRY, &hdev->flags) && + hdev->discovery.state != DISCOVERY_RESOLVING) hci_discovery_set_state(hdev, DISCOVERY_STOPPED); } else { From c24930457d4b06903aa5dada50e04a83513e3b6b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 14 May 2015 14:40:50 +0200 Subject: [PATCH 515/652] firmware: dmi_scan: Simplified displayed version The trailing .x adds no information for the reader, and if anyone tries to parse that line, this is more work as they have 3 different formats to handle instead of 2. Plus, this makes backporting fixes harder. Signed-off-by: Jean Delvare Fixes: 95be58df74a5 ("firmware: dmi_scan: Use full dmi version for SMBIOS3") Cc: Ivan Khoronzhuk --- drivers/firmware/dmi_scan.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 6e45a43ffe84..5ebb6ceeabfc 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -506,9 +506,8 @@ static int __init dmi_present(const u8 *buf) if (dmi_walk_early(dmi_decode) == 0) { if (smbios_ver) { dmi_ver = smbios_ver; - pr_info("SMBIOS %d.%d%s present.\n", - dmi_ver >> 8, dmi_ver & 0xFF, - (dmi_ver < 0x0300) ? "" : ".x"); + pr_info("SMBIOS %d.%d present.\n", + dmi_ver >> 8, dmi_ver & 0xFF); } else { dmi_ver = (buf[14] & 0xF0) << 4 | (buf[14] & 0x0F); From 5c1ac56b51b9d222ab202dec1ac2f4215346129d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 14 May 2015 14:40:50 +0200 Subject: [PATCH 516/652] firmware: dmi_scan: Fix ordering of product_uuid In function dmi_present(), dmi_walk_early() calls dmi_table(), which calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last function makes a decision based on the value of global variable dmi_ver. The problem is that this variable is set right _after_ dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0 regardless of the actual version implemented. This causes /sys/class/dmi/id/product_uuid to always use the old ordering even on systems implementing DMI/SMBIOS 2.6 or later, which should use the new ordering. This is broken since kernel v3.8 for legacy DMI implementations and since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3 implementations with the 64-bit entry point are not affected. The first breakage does not matter much as in practice legacy DMI implementations are always for versions older than 2.6, which is when the UUID ordering changed. The second breakage is more problematic as it affects the vast majority of x86 systems manufactured since 2009. Signed-off-by: Jean Delvare Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Acked-by: Zhenzhong Duan Cc: Ben Hutchings Cc: Artem Savkov Cc: Ivan Khoronzhuk Cc: Matt Fleming Cc: stable@vger.kernel.org [v3.10+] --- drivers/firmware/dmi_scan.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 5ebb6ceeabfc..97b1616aa391 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -499,18 +499,19 @@ static int __init dmi_present(const u8 *buf) buf += 16; if (memcmp(buf, "_DMI_", 5) == 0 && dmi_checksum(buf, 15)) { + if (smbios_ver) + dmi_ver = smbios_ver; + else + dmi_ver = (buf[14] & 0xF0) << 4 | (buf[14] & 0x0F); dmi_num = get_unaligned_le16(buf + 12); dmi_len = get_unaligned_le16(buf + 6); dmi_base = get_unaligned_le32(buf + 8); if (dmi_walk_early(dmi_decode) == 0) { if (smbios_ver) { - dmi_ver = smbios_ver; pr_info("SMBIOS %d.%d present.\n", dmi_ver >> 8, dmi_ver & 0xFF); } else { - dmi_ver = (buf[14] & 0xF0) << 4 | - (buf[14] & 0x0F); pr_info("Legacy DMI %d.%d present.\n", dmi_ver >> 8, dmi_ver & 0xFF); } From fc99f97af2f79be02c5045c9a02c50bdcc0c8ff8 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 9 Apr 2015 16:39:51 +0200 Subject: [PATCH 517/652] drm/msm: Fix a couple of 64-bit build warnings Avoid casts from pointers to fixed-size integers to prevent the compiler from warning. Print virtual memory addresses using %p instead. Also turn a couple of %d/%x specifiers into %zu/%zd/%zx to avoid further warnings due to mismatched format strings. Signed-off-by: Thierry Reding Reviewed-by: Rob Clark --- drivers/gpu/drm/msm/edp/edp_aux.c | 4 ++-- drivers/gpu/drm/msm/msm_drv.c | 10 +++++----- drivers/gpu/drm/msm/msm_gem.c | 2 +- drivers/gpu/drm/msm/msm_iommu.c | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/msm/edp/edp_aux.c b/drivers/gpu/drm/msm/edp/edp_aux.c index 5f5a84f6074c..208f9d47f82e 100644 --- a/drivers/gpu/drm/msm/edp/edp_aux.c +++ b/drivers/gpu/drm/msm/edp/edp_aux.c @@ -132,7 +132,7 @@ ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg) /* msg sanity check */ if ((native && (msg->size > AUX_CMD_NATIVE_MAX)) || (msg->size > AUX_CMD_I2C_MAX)) { - pr_err("%s: invalid msg: size(%d), request(%x)\n", + pr_err("%s: invalid msg: size(%zu), request(%x)\n", __func__, msg->size, msg->request); return -EINVAL; } @@ -155,7 +155,7 @@ ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg) */ edp_write(aux->base + REG_EDP_AUX_TRANS_CTRL, 0); msm_edp_aux_ctrl(aux, 1); - pr_err("%s: aux timeout, %d\n", __func__, ret); + pr_err("%s: aux timeout, %zd\n", __func__, ret); goto unlock_exit; } DBG("completion"); diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 47f4dd407671..cc5dc5299b8d 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -94,7 +94,7 @@ void __iomem *msm_ioremap(struct platform_device *pdev, const char *name, } if (reglog) - printk(KERN_DEBUG "IO:region %s %08x %08lx\n", dbgname, (u32)ptr, size); + printk(KERN_DEBUG "IO:region %s %p %08lx\n", dbgname, ptr, size); return ptr; } @@ -102,7 +102,7 @@ void __iomem *msm_ioremap(struct platform_device *pdev, const char *name, void msm_writel(u32 data, void __iomem *addr) { if (reglog) - printk(KERN_DEBUG "IO:W %08x %08x\n", (u32)addr, data); + printk(KERN_DEBUG "IO:W %p %08x\n", addr, data); writel(data, addr); } @@ -110,7 +110,7 @@ u32 msm_readl(const void __iomem *addr) { u32 val = readl(addr); if (reglog) - printk(KERN_ERR "IO:R %08x %08x\n", (u32)addr, val); + printk(KERN_ERR "IO:R %p %08x\n", addr, val); return val; } @@ -177,7 +177,7 @@ static int get_mdp_ver(struct platform_device *pdev) const struct of_device_id *match; match = of_match_node(match_types, dev->of_node); if (match) - return (int)match->data; + return (int)(unsigned long)match->data; #endif return 4; } @@ -216,7 +216,7 @@ static int msm_init_vram(struct drm_device *dev) if (ret) return ret; size = r.end - r.start; - DRM_INFO("using VRAM carveout: %lx@%08x\n", size, r.start); + DRM_INFO("using VRAM carveout: %lx@%pa\n", size, &r.start); } else #endif diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 479d8af72bcb..52839769eb6c 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -483,7 +483,7 @@ void msm_gem_describe(struct drm_gem_object *obj, struct seq_file *m) uint64_t off = drm_vma_node_start(&obj->vma_node); WARN_ON(!mutex_is_locked(&dev->struct_mutex)); - seq_printf(m, "%08x: %c(r=%u,w=%u) %2d (%2d) %08llx %p %d\n", + seq_printf(m, "%08x: %c(r=%u,w=%u) %2d (%2d) %08llx %p %zu\n", msm_obj->flags, is_active(msm_obj) ? 'A' : 'I', msm_obj->read_fence, msm_obj->write_fence, obj->name, obj->refcount.refcount.counter, diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c index 7acdaa5688b7..7ac2f1997e4a 100644 --- a/drivers/gpu/drm/msm/msm_iommu.c +++ b/drivers/gpu/drm/msm/msm_iommu.c @@ -60,7 +60,7 @@ static int msm_iommu_map(struct msm_mmu *mmu, uint32_t iova, u32 pa = sg_phys(sg) - sg->offset; size_t bytes = sg->length + sg->offset; - VERB("map[%d]: %08x %08x(%x)", i, iova, pa, bytes); + VERB("map[%d]: %08x %08x(%zx)", i, iova, pa, bytes); ret = iommu_map(domain, da, pa, bytes, prot); if (ret) @@ -99,7 +99,7 @@ static int msm_iommu_unmap(struct msm_mmu *mmu, uint32_t iova, if (unmapped < bytes) return unmapped; - VERB("unmap[%d]: %08x(%x)", i, iova, bytes); + VERB("unmap[%d]: %08x(%zx)", i, iova, bytes); BUG_ON(!PAGE_ALIGNED(bytes)); From 981371f326235e07e33f62b4196d1e04603f6a49 Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Thu, 30 Apr 2015 10:39:26 -0400 Subject: [PATCH 518/652] drm/msm/dsi: Fix a couple more 64-bit build warnings Avoid such errors at compilation time: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' Signed-off-by: Stephane Viau --- drivers/gpu/drm/msm/dsi/dsi_host.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 956b22492c9a..28e712792159 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1023,7 +1023,7 @@ static int dsi_short_read1_resp(u8 *buf, const struct mipi_dsi_msg *msg) *data = buf[1]; /* strip out dcs type */ return 1; } else { - pr_err("%s: read data does not match with rx_buf len %d\n", + pr_err("%s: read data does not match with rx_buf len %zu\n", __func__, msg->rx_len); return -EINVAL; } @@ -1040,7 +1040,7 @@ static int dsi_short_read2_resp(u8 *buf, const struct mipi_dsi_msg *msg) data[1] = buf[2]; return 2; } else { - pr_err("%s: read data does not match with rx_buf len %d\n", + pr_err("%s: read data does not match with rx_buf len %zu\n", __func__, msg->rx_len); return -EINVAL; } From a2ca77898e9b81f6d6b3bfa1ff46713e697e8af7 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Mon, 23 Feb 2015 15:59:21 +0530 Subject: [PATCH 519/652] drm: msm: Fix build when legacy fbdev support isn't set The DRM_KMS_FB_HELPER config is selected only when DRM_MSM_FBDEV config is selected. The driver accesses drm_fb_helper_* functions even when legacy fbdev support is disabled in msm. Wrap around these functions with #ifdef checks to prevent build break. Signed-off-by: Archit Taneja --- drivers/gpu/drm/msm/msm_drv.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index cc5dc5299b8d..72f2b962efd4 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -21,9 +21,11 @@ static void msm_fb_output_poll_changed(struct drm_device *dev) { +#ifdef CONFIG_DRM_MSM_FBDEV struct msm_drm_private *priv = dev->dev_private; if (priv->fbdev) drm_fb_helper_hotplug_event(priv->fbdev); +#endif } static const struct drm_mode_config_funcs mode_config_funcs = { @@ -419,9 +421,11 @@ static void msm_preclose(struct drm_device *dev, struct drm_file *file) static void msm_lastclose(struct drm_device *dev) { +#ifdef CONFIG_DRM_MSM_FBDEV struct msm_drm_private *priv = dev->dev_private; if (priv->fbdev) drm_fb_helper_restore_fbdev_mode_unlocked(priv->fbdev); +#endif } static irqreturn_t msm_irq(int irq, void *arg) From 6128f1bec447cdaa42b61093e351697dbe1c72ed Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 5 Apr 2015 14:06:31 +0200 Subject: [PATCH 520/652] drm/msm/dp: fix error return code Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall --- drivers/gpu/drm/msm/edp/edp_ctrl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c index 0ec5abdba5c4..29e52d7c61c0 100644 --- a/drivers/gpu/drm/msm/edp/edp_ctrl.c +++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c @@ -1149,12 +1149,13 @@ int msm_edp_ctrl_init(struct msm_edp *edp) ctrl->aux = msm_edp_aux_init(dev, ctrl->base, &ctrl->drm_aux); if (!ctrl->aux || !ctrl->drm_aux) { pr_err("%s:failed to init aux\n", __func__); - return ret; + return -ENOMEM; } ctrl->phy = msm_edp_phy_init(dev, ctrl->base); if (!ctrl->phy) { pr_err("%s:failed to init phy\n", __func__); + ret = -ENOMEM; goto err_destory_aux; } From 651ad3f52b9d0b11b8ebe94c3810ac89f9f75653 Mon Sep 17 00:00:00 2001 From: Hai Li Date: Wed, 29 Apr 2015 11:38:59 -0400 Subject: [PATCH 521/652] drm/msm/dsi: Fixup missing *break* statement during cmd rx Signed-off-by: Hai Li --- drivers/gpu/drm/msm/dsi/dsi_host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 28e712792159..a3ff0e296604 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1797,6 +1797,7 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host, case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT: pr_err("%s: rx ACK_ERR_PACLAGE\n", __func__); ret = 0; + break; case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE: case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE: ret = dsi_short_read1_resp(buf, msg); From fe34464df5e8bd4b09db170477f32db4eade0444 Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Thu, 30 Apr 2015 13:45:52 -0400 Subject: [PATCH 522/652] drm/msm/mdp5: Fix iteration on INTF config array The current iteration in get_dsi_id_from_intf() is wrong: instead of iterating until hw_cfg->intf.count, we need to iterate until MDP5_INTF_NUM_MAX here. Let's take the example of msm8x16: hw_cfg->intf.count = 1 intfs[0] = INTF_Disabled intfs[1] = INTF_DSI If we stop iterating once i reaches hw_cfg->intf.count (== 1), we will miss the test for intfs[1]. Actually, this hw_cfg->intf.count entry is quite confusing and is not (or *should not be*) used anywhere else; let's remove it. Signed-off-by: Stephane Viau --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 34 ++++++++++++------------- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h | 9 ++++--- drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c | 12 ++++----- 3 files changed, 29 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index e001e6b2296a..8b9a7931b162 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -72,14 +72,13 @@ const struct mdp5_cfg_hw msm8x74_config = { .base = { 0x12d00, 0x12e00, 0x12f00 }, }, .intf = { - .count = 4, .base = { 0x12500, 0x12700, 0x12900, 0x12b00 }, - }, - .intfs = { - [0] = INTF_eDP, - [1] = INTF_DSI, - [2] = INTF_DSI, - [3] = INTF_HDMI, + .connect = { + [0] = INTF_eDP, + [1] = INTF_DSI, + [2] = INTF_DSI, + [3] = INTF_HDMI, + }, }, .max_clk = 200000000, }; @@ -142,14 +141,13 @@ const struct mdp5_cfg_hw apq8084_config = { .base = { 0x12f00, 0x13000, 0x13100, 0x13200 }, }, .intf = { - .count = 5, .base = { 0x12500, 0x12700, 0x12900, 0x12b00, 0x12d00 }, - }, - .intfs = { - [0] = INTF_eDP, - [1] = INTF_DSI, - [2] = INTF_DSI, - [3] = INTF_HDMI, + .connect = { + [0] = INTF_eDP, + [1] = INTF_DSI, + [2] = INTF_DSI, + [3] = INTF_HDMI, + }, }, .max_clk = 320000000, }; @@ -196,10 +194,12 @@ const struct mdp5_cfg_hw msm8x16_config = { }, .intf = { - .count = 1, /* INTF_1 */ - .base = { 0x6B800 }, + .base = { 0x00000, 0x6b800 }, + .connect = { + [0] = INTF_DISABLED, + [1] = INTF_DSI, + }, }, - /* TODO enable .intfs[] with [1] = INTF_DSI, once DSI is implemented */ .max_clk = 320000000, }; diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h index 3a551b0892d8..69349abe59f2 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h @@ -59,6 +59,11 @@ struct mdp5_smp_block { #define MDP5_INTF_NUM_MAX 5 +struct mdp5_intf_block { + uint32_t base[MAX_BASES]; + u32 connect[MDP5_INTF_NUM_MAX]; /* array of enum mdp5_intf_type */ +}; + struct mdp5_cfg_hw { char *name; @@ -72,9 +77,7 @@ struct mdp5_cfg_hw { struct mdp5_sub_block dspp; struct mdp5_sub_block ad; struct mdp5_sub_block pp; - struct mdp5_sub_block intf; - - u32 intfs[MDP5_INTF_NUM_MAX]; /* array of enum mdp5_intf_type */ + struct mdp5_intf_block intf; uint32_t max_clk; }; diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c index dfa8beb9343a..bbacf9d2b738 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c @@ -206,8 +206,8 @@ static struct drm_encoder *construct_encoder(struct mdp5_kms *mdp5_kms, static int get_dsi_id_from_intf(const struct mdp5_cfg_hw *hw_cfg, int intf_num) { - const int intf_cnt = hw_cfg->intf.count; - const u32 *intfs = hw_cfg->intfs; + const enum mdp5_intf_type *intfs = hw_cfg->intf.connect; + const int intf_cnt = ARRAY_SIZE(hw_cfg->intf.connect); int id = 0, i; for (i = 0; i < intf_cnt; i++) { @@ -228,7 +228,7 @@ static int modeset_init_intf(struct mdp5_kms *mdp5_kms, int intf_num) struct msm_drm_private *priv = dev->dev_private; const struct mdp5_cfg_hw *hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); - enum mdp5_intf_type intf_type = hw_cfg->intfs[intf_num]; + enum mdp5_intf_type intf_type = hw_cfg->intf.connect[intf_num]; struct drm_encoder *encoder; int ret = 0; @@ -365,7 +365,7 @@ static int modeset_init(struct mdp5_kms *mdp5_kms) /* Construct encoders and modeset initialize connector devices * for each external display interface. */ - for (i = 0; i < ARRAY_SIZE(hw_cfg->intfs); i++) { + for (i = 0; i < ARRAY_SIZE(hw_cfg->intf.connect); i++) { ret = modeset_init_intf(mdp5_kms, i); if (ret) goto fail; @@ -514,8 +514,8 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev) */ mdp5_enable(mdp5_kms); for (i = 0; i < MDP5_INTF_NUM_MAX; i++) { - if (!config->hw->intf.base[i] || - mdp5_cfg_intf_is_virtual(config->hw->intfs[i])) + if (mdp5_cfg_intf_is_virtual(config->hw->intf.connect[i]) || + !config->hw->intf.base[i]) continue; mdp5_write(mdp5_kms, REG_MDP5_INTF_TIMING_ENGINE_EN(i), 0); } From bed447e7d1bd2d32d3fb09b4de0d0d5a23d3f82b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 13 May 2015 09:51:01 +1000 Subject: [PATCH 523/652] drm/radeon: don't do mst probing if MST isn't enabled. This causes an oops as we haven't initialised the mst layer. Reported-by: Dave Jones < Signed-off-by: Dave Airlie Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_dp_mst.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_dp_mst.c b/drivers/gpu/drm/radeon/radeon_dp_mst.c index 1017338a49d9..2b98ed3e684d 100644 --- a/drivers/gpu/drm/radeon/radeon_dp_mst.c +++ b/drivers/gpu/drm/radeon/radeon_dp_mst.c @@ -666,6 +666,9 @@ radeon_dp_mst_probe(struct radeon_connector *radeon_connector) int ret; u8 msg[1]; + if (!radeon_mst) + return 0; + if (dig_connector->dpcd[DP_DPCD_REV] < 0x12) return 0; From 7194b62c8c99727e3f145b00b8390a905252370e Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Tue, 5 May 2015 09:47:57 -0400 Subject: [PATCH 524/652] drm/msm: fix unbalanced DRM framebuffer init/destroy When msm_framebuffer_init() fails before calling drm_framebuffer_init(), drm_framebuffer_cleanup() [called in msm_framebuffer_destroy()] is still being called even though drm_framebuffer_init() was not called for that buffer. Thus a NULL pointer derefencing: [ 247.529691] Unable to handle kernel NULL pointer dereference at virtual address 0000027c ... [ 247.563996] PC is at __mutex_lock_slowpath+0x94/0x3a8 ... [ 247.823025] [] (__mutex_lock_slowpath) from [] (mutex_lock+0x20/0x3c) [ 247.831186] [] (mutex_lock) from [] (drm_framebuffer_cleanup+0x18/0x38) [ 247.839520] [] (drm_framebuffer_cleanup) from [] (msm_framebuffer_destroy+0x48/0x100) [ 247.849066] [] (msm_framebuffer_destroy) from [] (msm_framebuffer_init+0x1e8/0x228) [ 247.858439] [] (msm_framebuffer_init) from [] (msm_framebuffer_create+0x70/0x134) [ 247.867642] [] (msm_framebuffer_create) from [] (internal_framebuffer_create+0x67c/0x7b4) [ 247.877537] [] (internal_framebuffer_create) from [] (drm_mode_addfb2+0x20/0x98) [ 247.886650] [] (drm_mode_addfb2) from [] (drm_ioctl+0x240/0x420) [ 247.894378] [] (drm_ioctl) from [] (do_vfs_ioctl+0x4e4/0x5a4) ... Signed-off-by: Stephane Viau [plus initialize msm_fb to NULL to -Rob] Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_fb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_fb.c b/drivers/gpu/drm/msm/msm_fb.c index 6b573e612f27..121713281417 100644 --- a/drivers/gpu/drm/msm/msm_fb.c +++ b/drivers/gpu/drm/msm/msm_fb.c @@ -172,8 +172,8 @@ struct drm_framebuffer *msm_framebuffer_init(struct drm_device *dev, { struct msm_drm_private *priv = dev->dev_private; struct msm_kms *kms = priv->kms; - struct msm_framebuffer *msm_fb; - struct drm_framebuffer *fb = NULL; + struct msm_framebuffer *msm_fb = NULL; + struct drm_framebuffer *fb; const struct msm_format *format; int ret, i, n; unsigned int hsub, vsub; @@ -239,8 +239,7 @@ struct drm_framebuffer *msm_framebuffer_init(struct drm_device *dev, return fb; fail: - if (fb) - msm_framebuffer_destroy(fb); + kfree(msm_fb); return ERR_PTR(ret); } From ff431fa4d96fc34568454aae4cc264a7760636a8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 7 May 2015 15:19:02 -0400 Subject: [PATCH 525/652] drm/msm/dsi: use pr_err_ratelimited When things go badly we can get a lot of these error irqs. Let's not DoS the user. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index a3ff0e296604..47a7f0036478 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1215,7 +1215,7 @@ static void dsi_err_worker(struct work_struct *work) container_of(work, struct msm_dsi_host, err_work); u32 status = msm_host->err_work_state; - pr_err("%s: status=%x\n", __func__, status); + pr_err_ratelimited("%s: status=%x\n", __func__, status); if (status & DSI_ERR_STATE_MDP_FIFO_UNDERFLOW) dsi_sw_reset_restore(msm_host); From 13f15565f7887a028b3442bbd763ff6d07b48479 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 7 May 2015 15:20:13 -0400 Subject: [PATCH 526/652] drm/msm: setup vram after component_bind_all() First of all, we don't want -EPROBE_DEFER when trying to bind children to cause us to forget to free our vram. And second we don't want vram allocation fail to trigger _unbind_all() before _bind_all(). Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 72f2b962efd4..cc6485ef2949 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -285,10 +285,6 @@ static int msm_load(struct drm_device *dev, unsigned long flags) drm_mode_config_init(dev); - ret = msm_init_vram(dev); - if (ret) - goto fail; - platform_set_drvdata(pdev, dev); /* Bind all our sub-components: */ @@ -296,6 +292,10 @@ static int msm_load(struct drm_device *dev, unsigned long flags) if (ret) return ret; + ret = msm_init_vram(dev); + if (ret) + goto fail; + switch (get_mdp_ver(pdev)) { case 4: kms = mdp4_kms_init(dev); From e8f98457587b8a11121ea0da6b6fe995a136e8fa Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 14 May 2015 21:15:20 +0900 Subject: [PATCH 527/652] MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer Add Krzysztof Kozlowski as a co-maintainer of Samsung Exynos ARM architecture to review the patches. Patches will go as usual - picked up by Kukjin Kim. Cc: Russell King Cc: Kukjin Kim Cc: Kevin Hilman Cc: Arnd Bergmann Cc: Olof Johansson Cc: linux-samsung-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Krzysztof Kozlowski Acked-by: Javier Martinez Canillas Acked-by: Tobias Jakobi Acked-by: Olof Johansson Acked-by: Kevin Hilman Signed-off-by: Kevin Hilman --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f0d922bcc39f..67b456d7c451 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1371,6 +1371,7 @@ N: rockchip ARM/SAMSUNG EXYNOS ARM ARCHITECTURES M: Kukjin Kim +M: Krzysztof Kozlowski L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained From db7c727402b3f6a604f0c52be5f6df8ca3797030 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 4 May 2015 11:43:31 -0700 Subject: [PATCH 528/652] mtd: readtest: don't clobber error reports Commit 2a6a28e7922c ("mtd: Make MTD tests cancelable") accidentally clobbered any read failure reports. Coverity CID #1296020 Signed-off-by: Brian Norris --- drivers/mtd/tests/readtest.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/tests/readtest.c b/drivers/mtd/tests/readtest.c index a3196b750a22..58df07acdbdb 100644 --- a/drivers/mtd/tests/readtest.c +++ b/drivers/mtd/tests/readtest.c @@ -191,9 +191,11 @@ static int __init mtd_readtest_init(void) err = ret; } - err = mtdtest_relax(); - if (err) + ret = mtdtest_relax(); + if (ret) { + err = ret; goto out; + } } if (err) From 6f6b287968681f660e151c202765da9f58d3dcba Mon Sep 17 00:00:00 2001 From: Hai Li Date: Thu, 23 Apr 2015 14:13:21 -0400 Subject: [PATCH 529/652] drm/msm: Attach assigned encoder to eDP and DSI connectors drm_mode_connector_attach_encoder() function call is missing during eDP and DSI connector initialization. As a result, no encoder is returned by DRM_IOCTL_MODE_GETCONNECTOR system call. This change is to fix this issue. Signed-off-by: Hai Li --- drivers/gpu/drm/msm/dsi/dsi.c | 10 +++++----- drivers/gpu/drm/msm/dsi/dsi_manager.c | 6 +++++- drivers/gpu/drm/msm/edp/edp_connector.c | 2 ++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c index 28d1f95a90cc..ad50b80225f5 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.c +++ b/drivers/gpu/drm/msm/dsi/dsi.c @@ -177,6 +177,11 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, goto fail; } + for (i = 0; i < MSM_DSI_ENCODER_NUM; i++) { + encoders[i]->bridge = msm_dsi->bridge; + msm_dsi->encoders[i] = encoders[i]; + } + msm_dsi->connector = msm_dsi_manager_connector_init(msm_dsi->id); if (IS_ERR(msm_dsi->connector)) { ret = PTR_ERR(msm_dsi->connector); @@ -185,11 +190,6 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, goto fail; } - for (i = 0; i < MSM_DSI_ENCODER_NUM; i++) { - encoders[i]->bridge = msm_dsi->bridge; - msm_dsi->encoders[i] = encoders[i]; - } - priv->bridges[priv->num_bridges++] = msm_dsi->bridge; priv->connectors[priv->num_connectors++] = msm_dsi->connector; diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index ee3ebcaa33f5..0a40f3c64e8b 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -462,7 +462,7 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct drm_connector *connector = NULL; struct dsi_connector *dsi_connector; - int ret; + int ret, i; dsi_connector = devm_kzalloc(msm_dsi->dev->dev, sizeof(*dsi_connector), GFP_KERNEL); @@ -495,6 +495,10 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) if (ret) goto fail; + for (i = 0; i < MSM_DSI_ENCODER_NUM; i++) + drm_mode_connector_attach_encoder(connector, + msm_dsi->encoders[i]); + return connector; fail: diff --git a/drivers/gpu/drm/msm/edp/edp_connector.c b/drivers/gpu/drm/msm/edp/edp_connector.c index d8812e84da54..b4d1b469862a 100644 --- a/drivers/gpu/drm/msm/edp/edp_connector.c +++ b/drivers/gpu/drm/msm/edp/edp_connector.c @@ -151,6 +151,8 @@ struct drm_connector *msm_edp_connector_init(struct msm_edp *edp) if (ret) goto fail; + drm_mode_connector_attach_encoder(connector, edp->encoder); + return connector; fail: From ec1936eb099bb8c1c7a32b9ac4be128e1e68e2d9 Mon Sep 17 00:00:00 2001 From: Hai Li Date: Wed, 29 Apr 2015 11:39:00 -0400 Subject: [PATCH 530/652] drm/msm/dsi: Simplify the code to get the number of read byte During cmd rx, only new versions of H/W provide register to read back the real number of byte returned by panel. For the old versions, reading this register will not get the right number. In fact, we only need to assume the returned data is the same size as we expected, because later we will check the data type to detect error. Signed-off-by: Hai Li --- drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 47a7f0036478..649d20d29f92 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1093,7 +1093,6 @@ static int dsi_cmd_dma_rx(struct msm_dsi_host *msm_host, { u32 *lp, *temp, data; int i, j = 0, cnt; - bool ack_error = false; u32 read_cnt; u8 reg[16]; int repeated_bytes = 0; @@ -1105,15 +1104,10 @@ static int dsi_cmd_dma_rx(struct msm_dsi_host *msm_host, if (cnt > 4) cnt = 4; /* 4 x 32 bits registers only */ - /* Calculate real read data count */ - read_cnt = dsi_read(msm_host, 0x1d4) >> 16; - - ack_error = (rx_byte == 4) ? - (read_cnt == 8) : /* short pkt + 4-byte error pkt */ - (read_cnt == (pkt_size + 6 + 4)); /* long pkt+4-byte error pkt*/ - - if (ack_error) - read_cnt -= 4; /* Remove 4 byte error pkt */ + if (rx_byte == 4) + read_cnt = 4; + else + read_cnt = pkt_size + 6; /* * In case of multiple reads from the panel, after the first read, there From 91dd93f956b9ea9ecf47fd4b9acd2d2e7f980303 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 12 May 2015 17:24:50 -0700 Subject: [PATCH 531/652] netlink: move nl_table in read_mostly section netlink sockets creation and deletion heavily modify nl_table_users and nl_table_lock. If nl_table is sharing one cache line with one of them, netlink performance is really bad on SMP. ffffffff81ff5f00 B nl_table ffffffff81ff5f0c b nl_table_users Putting nl_table in read_mostly section increased performance of my open/delete netlink sockets test by about 80 % This came up while diagnosing a getaddrinfo() problem. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index daa0b818174b..dbe885901b34 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -89,7 +89,7 @@ static inline int netlink_is_kernel(struct sock *sk) return nlk_sk(sk)->flags & NETLINK_KERNEL_SOCKET; } -struct netlink_table *nl_table; +struct netlink_table *nl_table __read_mostly; EXPORT_SYMBOL_GPL(nl_table); static DECLARE_WAIT_QUEUE_HEAD(nl_table_wait); From 8f4d855839179f410fa910a26eb81d646d628f26 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 14 May 2015 18:19:01 -0400 Subject: [PATCH 532/652] ext4: fix lazytime optimization We had a fencepost error in the lazytime optimization which means that timestamp would get written to the wrong inode. Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 55b187c3bac1..0554b0b5957b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4345,7 +4345,7 @@ static void ext4_update_other_inodes_time(struct super_block *sb, int inode_size = EXT4_INODE_SIZE(sb); oi.orig_ino = orig_ino; - ino = orig_ino & ~(inodes_per_block - 1); + ino = (orig_ino & ~(inodes_per_block - 1)) + 1; for (i = 0; i < inodes_per_block; i++, ino++, buf += inode_size) { if (ino == orig_ino) continue; From 1b46617b8d0851c78b6440701d78fffbd9170741 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 14 May 2015 18:37:30 -0400 Subject: [PATCH 533/652] ext4: don't save the error information if the block device is read-only Google-Bug-Id: 20939131 Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index f06d0589ddba..ca9d4a2fed41 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -294,6 +294,8 @@ static void __save_error_info(struct super_block *sb, const char *func, struct ext4_super_block *es = EXT4_SB(sb)->s_es; EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; + if (bdev_read_only(sb->s_bdev)) + return; es->s_state |= cpu_to_le16(EXT4_ERROR_FS); es->s_last_error_time = cpu_to_le32(get_seconds()); strncpy(es->s_last_error_func, func, sizeof(es->s_last_error_func)); From 92c82639106214a9d34daa2bc791605eb1faab07 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 14 May 2015 18:43:36 -0400 Subject: [PATCH 534/652] ext4: remove unused function prototype from ext4.h The ext4_extent_tree_init() function hasn't been in the ext4 code for a long time ago, except in an unused function prototype in ext4.h Google-Bug-Id: 4530137 Signed-off-by: Theodore Ts'o --- fs/ext4/ext4.h | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 009a0590b20f..9a83f149ac85 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2889,7 +2889,6 @@ extern int ext4_map_blocks(handle_t *handle, struct inode *inode, struct ext4_map_blocks *map, int flags); extern int ext4_ext_calc_metadata_amount(struct inode *inode, ext4_lblk_t lblocks); -extern int ext4_extent_tree_init(handle_t *, struct inode *); extern int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int num, struct ext4_ext_path *path); From 9d506594069355d1fb2de3f9104667312ff08ed3 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Thu, 14 May 2015 18:55:18 -0400 Subject: [PATCH 535/652] ext4: fix NULL pointer dereference when journal restart fails Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913197c "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Cc: stable@vger.kernel.org Signed-off-by: Lukas Czerner Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara --- fs/ext4/ext4_jbd2.c | 6 ++++++ fs/jbd2/transaction.c | 25 ++++++++++++++++--------- 2 files changed, 22 insertions(+), 9 deletions(-) diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c index 3445035c7e01..d41843181818 100644 --- a/fs/ext4/ext4_jbd2.c +++ b/fs/ext4/ext4_jbd2.c @@ -87,6 +87,12 @@ int __ext4_journal_stop(const char *where, unsigned int line, handle_t *handle) ext4_put_nojournal(handle); return 0; } + + if (!handle->h_transaction) { + err = jbd2_journal_stop(handle); + return handle->h_err ? handle->h_err : err; + } + sb = handle->h_transaction->t_journal->j_private; err = handle->h_err; rc = jbd2_journal_stop(handle); diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 5f09370c90a8..ff2f2e6ad311 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -551,7 +551,6 @@ int jbd2_journal_extend(handle_t *handle, int nblocks) int result; int wanted; - WARN_ON(!transaction); if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; @@ -627,7 +626,6 @@ int jbd2__journal_restart(handle_t *handle, int nblocks, gfp_t gfp_mask) tid_t tid; int need_to_start, ret; - WARN_ON(!transaction); /* If we've had an abort of any type, don't even think about * actually doing the restart! */ if (is_handle_aborted(handle)) @@ -785,7 +783,6 @@ do_get_write_access(handle_t *handle, struct journal_head *jh, int need_copy = 0; unsigned long start_lock, time_lock; - WARN_ON(!transaction); if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; @@ -1051,7 +1048,6 @@ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh) int err; jbd_debug(5, "journal_head %p\n", jh); - WARN_ON(!transaction); err = -EROFS; if (is_handle_aborted(handle)) goto out; @@ -1266,7 +1262,6 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) struct journal_head *jh; int ret = 0; - WARN_ON(!transaction); if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; @@ -1397,7 +1392,6 @@ int jbd2_journal_forget (handle_t *handle, struct buffer_head *bh) int err = 0; int was_modified = 0; - WARN_ON(!transaction); if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; @@ -1530,8 +1524,22 @@ int jbd2_journal_stop(handle_t *handle) tid_t tid; pid_t pid; - if (!transaction) - goto free_and_exit; + if (!transaction) { + /* + * Handle is already detached from the transaction so + * there is nothing to do other than decrease a refcount, + * or free the handle if refcount drops to zero + */ + if (--handle->h_ref > 0) { + jbd_debug(4, "h_ref %d -> %d\n", handle->h_ref + 1, + handle->h_ref); + return err; + } else { + if (handle->h_rsv_handle) + jbd2_free_handle(handle->h_rsv_handle); + goto free_and_exit; + } + } journal = transaction->t_journal; J_ASSERT(journal_current_handle() == handle); @@ -2373,7 +2381,6 @@ int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *jinode) transaction_t *transaction = handle->h_transaction; journal_t *journal; - WARN_ON(!transaction); if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; From 2f974865ffdfe7b9f46a9940836c8b167342563d Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Thu, 14 May 2015 19:00:45 -0400 Subject: [PATCH 536/652] ext4: check for zero length extent explicitly The following commit introduced a bug when checking for zero length extent 5946d08 ext4: check for overlapping extents in ext4_valid_extent_entries() Zero length extent could pass the check if lblock is zero. Adding the explicit check for zero length back. Signed-off-by: Eryu Guan Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/extents.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index d74e08029643..451b92a9958a 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -377,7 +377,7 @@ static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext) ext4_lblk_t lblock = le32_to_cpu(ext->ee_block); ext4_lblk_t last = lblock + len - 1; - if (lblock > last) + if (len == 0 || lblock > last) return 0; return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, len); } From e531d0bceb402e643a4499de40dd3fa39d8d2e43 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 14 May 2015 19:11:50 -0400 Subject: [PATCH 537/652] jbd2: fix r_count overflows leading to buffer overflow in journal recovery The journal revoke block recovery code does not check r_count for sanity, which means that an evil value of r_count could result in the kernel reading off the end of the revoke table and into whatever garbage lies beyond. This could crash the kernel, so fix that. However, in testing this fix, I discovered that the code to write out the revoke tables also was not correctly checking to see if the block was full -- the current offset check is fine so long as the revoke table space size is a multiple of the record size, but this is not true when either journal_csum_v[23] are set. Signed-off-by: Darrick J. Wong Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Cc: stable@vger.kernel.org --- fs/jbd2/recovery.c | 10 +++++++++- fs/jbd2/revoke.c | 18 ++++++++++-------- 2 files changed, 19 insertions(+), 9 deletions(-) diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index b5128c6e63ad..a9079d035ae5 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -842,15 +842,23 @@ static int scan_revoke_records(journal_t *journal, struct buffer_head *bh, { jbd2_journal_revoke_header_t *header; int offset, max; + int csum_size = 0; + __u32 rcount; int record_len = 4; header = (jbd2_journal_revoke_header_t *) bh->b_data; offset = sizeof(jbd2_journal_revoke_header_t); - max = be32_to_cpu(header->r_count); + rcount = be32_to_cpu(header->r_count); if (!jbd2_revoke_block_csum_verify(journal, header)) return -EINVAL; + if (jbd2_journal_has_csum_v2or3(journal)) + csum_size = sizeof(struct jbd2_journal_revoke_tail); + if (rcount > journal->j_blocksize - csum_size) + return -EINVAL; + max = rcount; + if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT)) record_len = 8; diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c index c6cbaef2bda1..14214da80eb8 100644 --- a/fs/jbd2/revoke.c +++ b/fs/jbd2/revoke.c @@ -577,7 +577,7 @@ static void write_one_revoke_record(journal_t *journal, { int csum_size = 0; struct buffer_head *descriptor; - int offset; + int sz, offset; journal_header_t *header; /* If we are already aborting, this all becomes a noop. We @@ -594,9 +594,14 @@ static void write_one_revoke_record(journal_t *journal, if (jbd2_journal_has_csum_v2or3(journal)) csum_size = sizeof(struct jbd2_journal_revoke_tail); + if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT)) + sz = 8; + else + sz = 4; + /* Make sure we have a descriptor with space left for the record */ if (descriptor) { - if (offset >= journal->j_blocksize - csum_size) { + if (offset + sz > journal->j_blocksize - csum_size) { flush_descriptor(journal, descriptor, offset, write_op); descriptor = NULL; } @@ -619,16 +624,13 @@ static void write_one_revoke_record(journal_t *journal, *descriptorp = descriptor; } - if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT)) { + if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT)) * ((__be64 *)(&descriptor->b_data[offset])) = cpu_to_be64(record->blocknr); - offset += 8; - - } else { + else * ((__be32 *)(&descriptor->b_data[offset])) = cpu_to_be32(record->blocknr); - offset += 4; - } + offset += sz; *offsetp = offset; } From f98b733e93e00365b4df78fbb33c2cad3080f6bb Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 14 May 2015 15:16:50 -0700 Subject: [PATCH 538/652] drivers/rtc/rtc-armada38x.c: remove unused local `flags' Reported-by: Fengguang Wu Cc: Gregory CLEMENT Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-armada38x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c index cb70ced7e0db..4b62d1a875e4 100644 --- a/drivers/rtc/rtc-armada38x.c +++ b/drivers/rtc/rtc-armada38x.c @@ -64,7 +64,7 @@ static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset) static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct armada38x_rtc *rtc = dev_get_drvdata(dev); - unsigned long time, time_check, flags; + unsigned long time, time_check; mutex_lock(&rtc->mutex_time); time = readl(rtc->regs + RTC_TIME); From 4933f55fe72c86e57efc454dd6e673c7f17af5a3 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 14 May 2015 15:16:53 -0700 Subject: [PATCH 539/652] tools/vm: fix page-flags build libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by: Andi Kleen Cc: Naoya Horiguchi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/vm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/vm/Makefile b/tools/vm/Makefile index ac884b65a072..93aadaf7ff63 100644 --- a/tools/vm/Makefile +++ b/tools/vm/Makefile @@ -3,7 +3,7 @@ TARGETS=page-types slabinfo page_owner_sort LIB_DIR = ../lib/api -LIBS = $(LIB_DIR)/libapikfs.a +LIBS = $(LIB_DIR)/libapi.a CC = $(CROSS_COMPILE)gcc CFLAGS = -Wall -Wextra -I../lib/ From 8f4fc071b1926d0b20336e2b3f8ab85c94c734c5 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 May 2015 15:16:55 -0700 Subject: [PATCH 540/652] gfp: add __GFP_NOACCOUNT Not all kmem allocations should be accounted to memcg. The following patch gives an example when accounting of a certain type of allocations to memcg can effectively result in a memory leak. This patch adds the __GFP_NOACCOUNT flag which if passed to kmalloc and friends will force the allocation to go through the root cgroup. It will be used by the next patch. Note, since in case of kmemleak enabled each kmalloc implies yet another allocation from the kmemleak_object cache, we add __GFP_NOACCOUNT to gfp_kmemleak_mask. Alternatively, we could introduce a per kmem cache flag disabling accounting for all allocations of a particular kind, but (a) we would not be able to bypass accounting for kmalloc then and (b) a kmem cache with this flag set could not be merged with a kmem cache without this flag, which would increase the number of global caches and therefore fragmentation even if the memory cgroup controller is not used. Despite its generic name, currently __GFP_NOACCOUNT disables accounting only for kmem allocations while user page allocations are always charged. To catch abusing of this flag, a warning is issued on an attempt of passing it to mem_cgroup_try_charge. Signed-off-by: Vladimir Davydov Cc: Tejun Heo Cc: Johannes Weiner Cc: Michal Hocko Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Greg Thelen Cc: Greg Kroah-Hartman Cc: [4.0.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 2 ++ include/linux/memcontrol.h | 4 ++++ mm/kmemleak.c | 3 ++- 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 97a9373e61e8..15928f0647e4 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -30,6 +30,7 @@ struct vm_area_struct; #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u +#define ___GFP_NOACCOUNT 0x100000u #define ___GFP_NOTRACK 0x200000u #define ___GFP_NO_KSWAPD 0x400000u #define ___GFP_OTHER_NODE 0x800000u @@ -87,6 +88,7 @@ struct vm_area_struct; #define __GFP_HARDWALL ((__force gfp_t)___GFP_HARDWALL) /* Enforce hardwall cpuset memory allocs */ #define __GFP_THISNODE ((__force gfp_t)___GFP_THISNODE)/* No fallback, no policies */ #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ +#define __GFP_NOACCOUNT ((__force gfp_t)___GFP_NOACCOUNT) /* Don't account to kmemcg */ #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) /* Don't track with kmemcheck */ #define __GFP_NO_KSWAPD ((__force gfp_t)___GFP_NO_KSWAPD) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 72dff5fb0d0c..6c8918114804 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -463,6 +463,8 @@ memcg_kmem_newpage_charge(gfp_t gfp, struct mem_cgroup **memcg, int order) if (!memcg_kmem_enabled()) return true; + if (gfp & __GFP_NOACCOUNT) + return true; /* * __GFP_NOFAIL allocations will move on even if charging is not * possible. Therefore we don't even try, and have this allocation @@ -522,6 +524,8 @@ memcg_kmem_get_cache(struct kmem_cache *cachep, gfp_t gfp) { if (!memcg_kmem_enabled()) return cachep; + if (gfp & __GFP_NOACCOUNT) + return cachep; if (gfp & __GFP_NOFAIL) return cachep; if (in_interrupt() || (!current->mm) || (current->flags & PF_KTHREAD)) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 5405aff5a590..f0fe4f2c1fa7 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -115,7 +115,8 @@ #define BYTES_PER_POINTER sizeof(void *) /* GFP bitmask for kmemleak internal allocations */ -#define gfp_kmemleak_mask(gfp) (((gfp) & (GFP_KERNEL | GFP_ATOMIC)) | \ +#define gfp_kmemleak_mask(gfp) (((gfp) & (GFP_KERNEL | GFP_ATOMIC | \ + __GFP_NOACCOUNT)) | \ __GFP_NORETRY | __GFP_NOMEMALLOC | \ __GFP_NOWARN) From 499611ed451508a42d1d7d1faff10177827755d5 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 May 2015 15:16:58 -0700 Subject: [PATCH 541/652] kernfs: do not account ino_ida allocations to memcg root->ino_ida is used for kernfs inode number allocations. Since IDA has a layered structure, different IDs can reside on the same layer, which is currently accounted to some memory cgroup. The problem is that each kmem cache of a memory cgroup has its own directory on sysfs (under /sys/fs/kernel//cgroup). If the inode number of such a directory or any file in it gets allocated from a layer accounted to the cgroup which the cache is created for, the cgroup will get pinned for good, because one has to free all kmem allocations accounted to a cgroup in order to release it and destroy all its kmem caches. That said we must not account layers of ino_ida to any memory cgroup. Since per net init operations may create new sysfs entries directly (e.g. lo device) or indirectly (nf_conntrack creates a new kmem cache per each namespace, which, in turn, creates new sysfs entries), an easy way to reproduce this issue is by creating network namespace(s) from inside a kmem-active memory cgroup. Signed-off-by: Vladimir Davydov Acked-by: Tejun Heo Cc: Johannes Weiner Cc: Michal Hocko Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Greg Thelen Cc: Greg Kroah-Hartman Cc: [4.0.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/kernfs/dir.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c index f131fc23ffc4..fffca9517321 100644 --- a/fs/kernfs/dir.c +++ b/fs/kernfs/dir.c @@ -518,7 +518,14 @@ static struct kernfs_node *__kernfs_new_node(struct kernfs_root *root, if (!kn) goto err_out1; - ret = ida_simple_get(&root->ino_ida, 1, 0, GFP_KERNEL); + /* + * If the ino of the sysfs entry created for a kmem cache gets + * allocated from an ida layer, which is accounted to the memcg that + * owns the cache, the memcg will get pinned forever. So do not account + * ino ida allocations. + */ + ret = ida_simple_get(&root->ino_ida, 1, 0, + GFP_KERNEL | __GFP_NOACCOUNT); if (ret < 0) goto err_out2; kn->ino = ret; From 929aa5b250bfc59aca492d3213c7f3a53e2a5247 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 14 May 2015 15:17:01 -0700 Subject: [PATCH 542/652] uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER {u,g}id_valid call {u,g}id_eq, which calls __k{u,g}id_val on both arguments and compares. With !CONFIG_MULTIUSER, __k{u,g}id_val return a constant 0, which makes {u,g}id_valid always return false. Change {u,g}id_valid to compare their argument against -1 instead. That produces identical results in the normal CONFIG_MULTIUSER=y case, but with !CONFIG_MULTIUSER will make {u,g}id_valid constant-fold into "return true;" rather than "return false;". This fixes uses of devpts without CONFIG_MULTIUSER. Signed-off-by: Josh Triplett Reported-by: Fengguang Wu , Cc: Peter Hurley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/uidgid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/uidgid.h b/include/linux/uidgid.h index 0ee05da38899..03835522dfcb 100644 --- a/include/linux/uidgid.h +++ b/include/linux/uidgid.h @@ -109,12 +109,12 @@ static inline bool gid_lte(kgid_t left, kgid_t right) static inline bool uid_valid(kuid_t uid) { - return !uid_eq(uid, INVALID_UID); + return __kuid_val(uid) != (uid_t) -1; } static inline bool gid_valid(kgid_t gid) { - return !gid_eq(gid, INVALID_GID); + return __kgid_val(gid) != (gid_t) -1; } #ifdef CONFIG_USER_NS From 1ae7013dfa4281644a9a9591105c24d639216b22 Mon Sep 17 00:00:00 2001 From: Hui Zhu Date: Thu, 14 May 2015 15:17:04 -0700 Subject: [PATCH 543/652] CMA: page_isolation: check buddy before accessing it I had an issue: Unable to handle kernel NULL pointer dereference at virtual address 0000082a pgd = cc970000 [0000082a] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM PC is at get_pageblock_flags_group+0x5c/0xb0 LR is at unset_migratetype_isolate+0x148/0x1b0 pc : [] lr : [] psr: 80000093 sp : c7029d00 ip : 00000105 fp : c7029d1c r10: 00000001 r9 : 0000000a r8 : 00000004 r7 : 60000013 r6 : 000000a4 r5 : c0a357e4 r4 : 00000000 r3 : 00000826 r2 : 00000002 r1 : 00000000 r0 : 0000003f Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2cb7006a DAC: 00000015 Backtrace: get_pageblock_flags_group+0x0/0xb0 unset_migratetype_isolate+0x0/0x1b0 undo_isolate_page_range+0x0/0xdc __alloc_contig_range+0x0/0x34c alloc_contig_range+0x0/0x18 This issue is because when calling unset_migratetype_isolate() to unset a part of CMA memory, it try to access the buddy page to get its status: if (order >= pageblock_order) { page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1); buddy_idx = __find_buddy_index(page_idx, order); buddy = page + (buddy_idx - page_idx); if (!is_migrate_isolate_page(buddy)) { But the begin addr of this part of CMA memory is very close to a part of memory that is reserved at boot time (not in buddy system). So add a check before accessing it. [akpm@linux-foundation.org: use conventional code layout] Signed-off-by: Hui Zhu Suggested-by: Laura Abbott Suggested-by: Joonsoo Kim Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_isolation.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/page_isolation.c b/mm/page_isolation.c index 755a42c76eb4..303c908790ef 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -101,7 +101,8 @@ void unset_migratetype_isolate(struct page *page, unsigned migratetype) buddy_idx = __find_buddy_index(page_idx, order); buddy = page + (buddy_idx - page_idx); - if (!is_migrate_isolate_page(buddy)) { + if (pfn_valid_within(page_to_pfn(buddy)) && + !is_migrate_isolate_page(buddy)) { __isolate_free_page(page, order); kernel_map_pages(page, (1 << order), 1); set_page_refcounted(page); From b77017555ce514262abcb28a0ff3cc065d4acfb8 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 14 May 2015 15:17:07 -0700 Subject: [PATCH 544/652] MAINTAINERS: update Jingoo Han's email address Change my private email address. Signed-off-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5d87ccbee19b..64b49f549211 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1935,7 +1935,7 @@ S: Maintained F: drivers/net/wireless/b43legacy/ BACKLIGHT CLASS/SUBSYSTEM -M: Jingoo Han +M: Jingoo Han M: Lee Jones S: Maintained F: drivers/video/backlight/ @@ -3918,7 +3918,7 @@ F: drivers/extcon/ F: Documentation/extcon/ EXYNOS DP DRIVER -M: Jingoo Han +M: Jingoo Han L: dri-devel@lists.freedesktop.org S: Maintained F: drivers/gpu/drm/exynos/exynos_dp* @@ -7557,7 +7557,7 @@ S: Maintained F: drivers/pci/host/*rcar* PCI DRIVER FOR SAMSUNG EXYNOS -M: Jingoo Han +M: Jingoo Han L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) @@ -7565,7 +7565,7 @@ S: Maintained F: drivers/pci/host/pci-exynos.c PCI DRIVER FOR SYNOPSIS DESIGNWARE -M: Jingoo Han +M: Jingoo Han L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/host/*designware* @@ -8521,7 +8521,7 @@ S: Supported F: sound/soc/samsung/ SAMSUNG FRAMEBUFFER DRIVER -M: Jingoo Han +M: Jingoo Han L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/fbdev/s3c-fb.c From b0dc2b9bb4ab782115b964310518ee0b17784277 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 14 May 2015 15:17:09 -0700 Subject: [PATCH 545/652] mm, numa: really disable NUMA balancing by default on single node machines NUMA balancing is meant to be disabled by default on UMA machines but the check is using nr_node_ids (highest node) instead of num_online_nodes (online nodes). The consequences are that a UMA machine with a node ID of 1 or higher will enable NUMA balancing. This will incur useless overhead due to minor faults with the impact depending on the workload. These are the impact on the stats when running a kernel build on a single node machine whose node ID happened to be 1: vanilla patched NUMA base PTE updates 5113158 0 NUMA huge PMD updates 643 0 NUMA page range updates 5442374 0 NUMA hint faults 2109622 0 NUMA hint local faults 2109622 0 NUMA hint local percent 100 100 NUMA pages migrated 0 0 Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Cc: [3.8+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index ede26291d4aa..747743237d9f 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2518,7 +2518,7 @@ static void __init check_numabalancing_enable(void) if (numabalancing_override) set_numabalancing_state(numabalancing_override == 1); - if (nr_node_ids > 1 && !numabalancing_override) { + if (num_online_nodes() > 1 && !numabalancing_override) { pr_info("%s automatic NUMA balancing. " "Configure with numa_balancing= or the " "kernel.numa_balancing sysctl", From e87a468eb97da35d8dc00e8fa9828b4de4ab69d0 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 14 May 2015 20:34:08 -0400 Subject: [PATCH 546/652] ipv6: Fix udp checksums with raw sockets It was reported that trancerout6 would cause a kernel to crash when trying to compute checksums on raw UDP packets. The cause was the check in __ip6_append_data that would attempt to use partial checksums on the packet. However, raw sockets do not initialize partial checksum fields so partial checksums can't be used. Solve this the same way IPv4 does it. raw sockets pass transhdrlen value of 0 to ip_append_data which causes the checksum to be computed in software. Use the same check in ip6_append_data (check transhdrlen). Reported-by: Wolfgang Walter CC: Wolfgang Walter CC: Eric Dumazet Signed-off-by: Vladislav Yasevich Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index c21777565c58..bc09cb97b840 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1300,8 +1300,10 @@ emsgsize: /* If this is the first and only packet and device * supports checksum offloading, let's use it. + * Use transhdrlen, same as IPv4, because partial + * sums only work when transhdrlen is set. */ - if (!skb && sk->sk_protocol == IPPROTO_UDP && + if (transhdrlen && sk->sk_protocol == IPPROTO_UDP && length + fragheaderlen < mtu && rt->dst.dev->features & NETIF_F_V6_CSUM && !exthdrlen) From c1c52db16e26a26b545821abae303310a074350f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 14 May 2015 18:17:08 -0500 Subject: [PATCH 547/652] net/mlx4: Avoid 'may be used uninitialized' warnings With a cross-compiler based on gcc-4.9, I see warnings like the following: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_CQ_wrapper': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3048:10: error: 'cq' may be used uninitialized in this function [-Werror=maybe-uninitialized] cq->mtt = mtt; I think the warning is spurious because we only use cq when cq_res_start_move_to() returns zero, and it always initializes *cq in that case. The srq case is similar. But maybe gcc isn't smart enough to figure that out. Initialize cq and srq explicitly to avoid the warnings. Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 92fce1b98558..bafe2180cf0c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3187,7 +3187,7 @@ int mlx4_SW2HW_CQ_wrapper(struct mlx4_dev *dev, int slave, int cqn = vhcr->in_modifier; struct mlx4_cq_context *cqc = inbox->buf; int mtt_base = cq_get_mtt_addr(cqc) / dev->caps.mtt_entry_sz; - struct res_cq *cq; + struct res_cq *cq = NULL; struct res_mtt *mtt; err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_HW, &cq); @@ -3223,7 +3223,7 @@ int mlx4_HW2SW_CQ_wrapper(struct mlx4_dev *dev, int slave, { int err; int cqn = vhcr->in_modifier; - struct res_cq *cq; + struct res_cq *cq = NULL; err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_ALLOCATED, &cq); if (err) @@ -3362,7 +3362,7 @@ int mlx4_SW2HW_SRQ_wrapper(struct mlx4_dev *dev, int slave, int err; int srqn = vhcr->in_modifier; struct res_mtt *mtt; - struct res_srq *srq; + struct res_srq *srq = NULL; struct mlx4_srq_context *srqc = inbox->buf; int mtt_base = srq_get_mtt_addr(srqc) / dev->caps.mtt_entry_sz; @@ -3406,7 +3406,7 @@ int mlx4_HW2SW_SRQ_wrapper(struct mlx4_dev *dev, int slave, { int err; int srqn = vhcr->in_modifier; - struct res_srq *srq; + struct res_srq *srq = NULL; err = srq_res_start_move_to(dev, slave, srqn, RES_SRQ_ALLOCATED, &srq); if (err) From eea39946a1f36e8a5a47c86e7ecfca6076868505 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Wed, 13 May 2015 21:17:41 -0700 Subject: [PATCH 548/652] rename RTNH_F_EXTERNAL to RTNH_F_OFFLOAD RTNH_F_EXTERNAL today is printed as "offload" in iproute2 output. This patch renames the flag to be consistent with what the user sees. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- include/uapi/linux/rtnetlink.h | 2 +- net/ipv4/fib_trie.c | 2 +- net/switchdev/switchdev.c | 6 +++--- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 974db03f7b1a..17fb02f488da 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -337,7 +337,7 @@ struct rtnexthop { #define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ #define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ #define RTNH_F_ONLINK 4 /* Gateway is forced on link */ -#define RTNH_F_EXTERNAL 8 /* Route installed externally */ +#define RTNH_F_OFFLOAD 8 /* offloaded route */ /* Macros to handle hexthops */ diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index e13fcc602da2..64c2076ced54 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1764,7 +1764,7 @@ void fib_table_flush_external(struct fib_table *tb) /* record local slen */ slen = fa->fa_slen; - if (!fi || !(fi->fib_flags & RTNH_F_EXTERNAL)) + if (!fi || !(fi->fib_flags & RTNH_F_OFFLOAD)) continue; netdev_switch_fib_ipv4_del(n->key, diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 46568b85c333..055453d48668 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -338,7 +338,7 @@ int netdev_switch_fib_ipv4_add(u32 dst, int dst_len, struct fib_info *fi, fi, tos, type, nlflags, tb_id); if (!err) - fi->fib_flags |= RTNH_F_EXTERNAL; + fi->fib_flags |= RTNH_F_OFFLOAD; } return err; @@ -364,7 +364,7 @@ int netdev_switch_fib_ipv4_del(u32 dst, int dst_len, struct fib_info *fi, const struct swdev_ops *ops; int err = 0; - if (!(fi->fib_flags & RTNH_F_EXTERNAL)) + if (!(fi->fib_flags & RTNH_F_OFFLOAD)) return 0; dev = netdev_switch_get_dev_by_nhs(fi); @@ -376,7 +376,7 @@ int netdev_switch_fib_ipv4_del(u32 dst, int dst_len, struct fib_info *fi, err = ops->swdev_fib_ipv4_del(dev, htonl(dst), dst_len, fi, tos, type, tb_id); if (!err) - fi->fib_flags &= ~RTNH_F_EXTERNAL; + fi->fib_flags &= ~RTNH_F_OFFLOAD; } return err; From b9576fc3624eb9fc88bec0d0ae883fd78be86239 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 15 May 2015 00:24:10 -0400 Subject: [PATCH 549/652] ext4: fix an ext3 collapse range regression in xfstests The xfstests test suite assumes that an attempt to collapse range on the range (0, 1) will return EOPNOTSUPP if the file system does not support collapse range. Commit 280227a75b56: "ext4: move check under lock scope to close a race" broke this, and this caused xfstests to fail when run when testing file systems that did not have the extents feature enabled. Reported-by: Eric Whitney Signed-off-by: Theodore Ts'o --- fs/ext4/extents.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 451b92a9958a..e003a1e81dc3 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -5396,6 +5396,14 @@ int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len) loff_t new_size, ioffset; int ret; + /* + * We need to test this early because xfstests assumes that a + * collapse range of (0, 1) will return EOPNOTSUPP if the file + * system does not support collapse range. + */ + if (!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) + return -EOPNOTSUPP; + /* Collapse range works only on fs block size aligned offsets. */ if (offset & (EXT4_CLUSTER_SIZE(sb) - 1) || len & (EXT4_CLUSTER_SIZE(sb) - 1)) From 31c17ac98fc005c0998f890094eb8fe17061e667 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 15 May 2015 14:25:43 +0200 Subject: [PATCH 550/652] MAINTAINERS: Add dts entries for some of the Marvell SoCs Since many releases, the modifications of the mvebu and berlin device tree files are merged through the mvebu subsystem. This patch makes it official in order to help the contributors using the get_maintainer.pl to find the accurate peoples. In the same time, updated the mvebu description which now includes the kirkwood SoCs and new Armada SoCs. Signed-off-by: Gregory CLEMENT Acked-by: Sebastian Hesselbarth Acked-by: Jason Cooper Acked-by: Andrew Lunn --- MAINTAINERS | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0d68b2..23a94ef317c4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1188,7 +1188,7 @@ ARM/MAGICIAN MACHINE SUPPORT M: Philipp Zabel S: Maintained -ARM/Marvell Armada 370 and Armada XP SOC support +ARM/Marvell Kirkwood and Armada 370, 375, 38x, XP SOC support M: Jason Cooper M: Andrew Lunn M: Gregory Clement @@ -1197,12 +1197,17 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-mvebu/ F: drivers/rtc/rtc-armada38x.c +F: arch/arm/boot/dts/armada* +F: arch/arm/boot/dts/kirkwood* + ARM/Marvell Berlin SoC support M: Sebastian Hesselbarth L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-berlin/ +F: arch/arm/boot/dts/berlin* + ARM/Marvell Dove/MV78xx0/Orion SOC support M: Jason Cooper @@ -1215,6 +1220,9 @@ F: arch/arm/mach-dove/ F: arch/arm/mach-mv78xx0/ F: arch/arm/mach-orion5x/ F: arch/arm/plat-orion/ +F: arch/arm/boot/dts/dove* +F: arch/arm/boot/dts/orion5x* + ARM/Orion SoC/Technologic Systems TS-78xx platform support M: Alexander Clouter From 774449ebcb18bae146e2b6f6d012b46e64a095b9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 15 May 2015 09:19:36 -0400 Subject: [PATCH 551/652] drm/msm: fix locking inconsistencies in gpu->destroy() In error paths, this was being called without struct_mutex held. Leading to panics like: msm 1a00000.qcom,mdss_mdp: No memory protection without IOMMU Kernel panic - not syncing: BUG! CPU: 0 PID: 1409 Comm: cat Not tainted 4.0.0-dirty #4 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Call trace: [] dump_backtrace+0x0/0x118 [] show_stack+0x10/0x20 [] dump_stack+0x84/0xc4 [] panic+0xd0/0x210 [] drm_gem_object_free+0x5c/0x60 [] adreno_gpu_cleanup+0x60/0x80 [] a3xx_destroy+0x20/0x70 [] a3xx_gpu_init+0x84/0x108 [] adreno_load_gpu+0x58/0x190 [] msm_open+0x74/0x88 [] drm_open+0x168/0x400 [] drm_stub_open+0xa8/0x118 [] chrdev_open+0x94/0x198 [] do_dentry_open+0x208/0x310 [] vfs_open+0x44/0x50 [] do_last.isra.14+0x2c4/0xc10 [] path_openat+0x80/0x5e8 [] do_filp_open+0x2c/0x98 [] do_sys_open+0x13c/0x228 [] SyS_openat+0xc/0x18 CPU1: stopping But there isn't any particularly good reason to hold struct_mutex for teardown, so just standardize on calling it without the mutex held and use the _unlocked() versions for GEM obj unref'ing Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/msm/msm_ringbuffer.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 94a5bee69fe7..bbdcab0a56c1 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -384,7 +384,7 @@ void adreno_gpu_cleanup(struct adreno_gpu *gpu) if (gpu->memptrs_bo) { if (gpu->memptrs_iova) msm_gem_put_iova(gpu->memptrs_bo, gpu->base.id); - drm_gem_object_unreference(gpu->memptrs_bo); + drm_gem_object_unreference_unlocked(gpu->memptrs_bo); } release_firmware(gpu->pm4); release_firmware(gpu->pfp); diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index cc6485ef2949..c80a6bee2b18 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -145,8 +145,8 @@ static int msm_unload(struct drm_device *dev) if (gpu) { mutex_lock(&dev->struct_mutex); gpu->funcs->pm_suspend(gpu); - gpu->funcs->destroy(gpu); mutex_unlock(&dev->struct_mutex); + gpu->funcs->destroy(gpu); } if (priv->vram.paddr) { diff --git a/drivers/gpu/drm/msm/msm_ringbuffer.c b/drivers/gpu/drm/msm/msm_ringbuffer.c index 8171537dd7d1..1f14b908b221 100644 --- a/drivers/gpu/drm/msm/msm_ringbuffer.c +++ b/drivers/gpu/drm/msm/msm_ringbuffer.c @@ -56,6 +56,6 @@ fail: void msm_ringbuffer_destroy(struct msm_ringbuffer *ring) { if (ring->bo) - drm_gem_object_unreference(ring->bo); + drm_gem_object_unreference_unlocked(ring->bo); kfree(ring); } From 86b5e7de07aa1abc87ecc40d2aca6070348e4469 Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Wed, 13 May 2015 17:01:36 -0500 Subject: [PATCH 552/652] net: macb: Add better comment for RXUBR handling Describe the handler for RXUBR better with a new comment. Signed-off-by: Nathan Sullivan Reviewied-by: Josh Cartwright Reviewied-by: Ben Shelton Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 61aa570aad9a..5f10dfc631d7 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1037,6 +1037,12 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * add that if/when we get our hands on a full-blown MII PHY. */ + /* There is a hardware issue under heavy load where DMA can + * stop, this causes endless "used buffer descriptor read" + * interrupts but it can be cleared by re-enabling RX. See + * the at91 manual, section 41.3.1 or the Zynq manual + * section 16.7.4 for details. + */ if (status & MACB_BIT(RXUBR)) { ctrl = macb_readl(bp, NCR); macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE)); From 595ca5880b37d4aa3c292d75531577175d36b225 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 7 May 2015 14:15:58 +0200 Subject: [PATCH 553/652] netfilter: avoid build error if TPROXY/SOCKET=y && NF_DEFRAG_IPV6=m With TPROXY=y but DEFRAG_IPV6=m we get build failure: net/built-in.o: In function `tproxy_tg_init': net/netfilter/xt_TPROXY.c:588: undefined reference to `nf_defrag_ipv6_enable' If DEFRAG_IPV6 is modular, TPROXY must be too. (or both must be builtin). This enforces =m for both. Reported-and-tested-by: Liu Hua Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index f70e34a68f70..a0f3e6a3c7d1 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -863,6 +863,7 @@ config NETFILTER_XT_TARGET_TPROXY depends on NETFILTER_XTABLES depends on NETFILTER_ADVANCED depends on (IPV6 || IPV6=n) + depends on (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n) depends on IP_NF_MANGLE select NF_DEFRAG_IPV4 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES @@ -1356,6 +1357,7 @@ config NETFILTER_XT_MATCH_SOCKET depends on NETFILTER_ADVANCED depends on !NF_CONNTRACK || NF_CONNTRACK depends on (IPV6 || IPV6=n) + depends on (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n) select NF_DEFRAG_IPV4 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES help From b3cad287d13b5f6695c6b4aab72969cd64bf0171 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Thu, 7 May 2015 14:54:16 +0200 Subject: [PATCH 554/652] conntrack: RFC5961 challenge ACK confuse conntrack LAST-ACK transition In compliance with RFC5961, the network stack send challenge ACK in response to spurious SYN packets, since commit 0c228e833c88 ("tcp: Restore RFC5961-compliant behavior for SYN packets"). This pose a problem for netfilter conntrack in state LAST_ACK, because this challenge ACK is (falsely) seen as ACKing last FIN, causing a false state transition (into TIME_WAIT). The challenge ACK is hard to distinguish from real last ACK. Thus, solution introduce a flag that tracks the potential for seeing a challenge ACK, in case a SYN packet is let through and current state is LAST_ACK. When conntrack transition LAST_ACK to TIME_WAIT happens, this flag is used for determining if we are expecting a challenge ACK. Scapy based reproducer script avail here: https://github.com/netoptimizer/network-testing/blob/master/scapy/tcp_hacks_3WHS_LAST_ACK.py Fixes: 0c228e833c88 ("tcp: Restore RFC5961-compliant behavior for SYN packets") Signed-off-by: Jesper Dangaard Brouer Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- .../uapi/linux/netfilter/nf_conntrack_tcp.h | 3 ++ net/netfilter/nf_conntrack_proto_tcp.c | 35 +++++++++++++++++-- 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/include/uapi/linux/netfilter/nf_conntrack_tcp.h b/include/uapi/linux/netfilter/nf_conntrack_tcp.h index 9993a421201c..ef9f80f0f529 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_tcp.h +++ b/include/uapi/linux/netfilter/nf_conntrack_tcp.h @@ -42,6 +42,9 @@ enum tcp_conntrack { /* The field td_maxack has been set */ #define IP_CT_TCP_FLAG_MAXACK_SET 0x20 +/* Marks possibility for expected RFC5961 challenge ACK */ +#define IP_CT_EXP_CHALLENGE_ACK 0x40 + struct nf_ct_tcp_flags { __u8 flags; __u8 mask; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 5caa0c41bf26..70383de72054 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -202,7 +202,7 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = { * sES -> sES :-) * sFW -> sCW Normal close request answered by ACK. * sCW -> sCW - * sLA -> sTW Last ACK detected. + * sLA -> sTW Last ACK detected (RFC5961 challenged) * sTW -> sTW Retransmitted last ACK. Remain in the same state. * sCL -> sCL */ @@ -261,7 +261,7 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = { * sES -> sES :-) * sFW -> sCW Normal close request answered by ACK. * sCW -> sCW - * sLA -> sTW Last ACK detected. + * sLA -> sTW Last ACK detected (RFC5961 challenged) * sTW -> sTW Retransmitted last ACK. * sCL -> sCL */ @@ -906,6 +906,7 @@ static int tcp_packet(struct nf_conn *ct, 1 : ct->proto.tcp.last_win; ct->proto.tcp.seen[ct->proto.tcp.last_dir].td_scale = ct->proto.tcp.last_wscale; + ct->proto.tcp.last_flags &= ~IP_CT_EXP_CHALLENGE_ACK; ct->proto.tcp.seen[ct->proto.tcp.last_dir].flags = ct->proto.tcp.last_flags; memset(&ct->proto.tcp.seen[dir], 0, @@ -923,7 +924,9 @@ static int tcp_packet(struct nf_conn *ct, * may be in sync but we are not. In that case, we annotate * the TCP options and let the packet go through. If it is a * valid SYN packet, the server will reply with a SYN/ACK, and - * then we'll get in sync. Otherwise, the server ignores it. */ + * then we'll get in sync. Otherwise, the server potentially + * responds with a challenge ACK if implementing RFC5961. + */ if (index == TCP_SYN_SET && dir == IP_CT_DIR_ORIGINAL) { struct ip_ct_tcp_state seen = {}; @@ -939,6 +942,13 @@ static int tcp_packet(struct nf_conn *ct, ct->proto.tcp.last_flags |= IP_CT_TCP_FLAG_SACK_PERM; } + /* Mark the potential for RFC5961 challenge ACK, + * this pose a special problem for LAST_ACK state + * as ACK is intrepretated as ACKing last FIN. + */ + if (old_state == TCP_CONNTRACK_LAST_ACK) + ct->proto.tcp.last_flags |= + IP_CT_EXP_CHALLENGE_ACK; } spin_unlock_bh(&ct->lock); if (LOG_INVALID(net, IPPROTO_TCP)) @@ -970,6 +980,25 @@ static int tcp_packet(struct nf_conn *ct, nf_log_packet(net, pf, 0, skb, NULL, NULL, NULL, "nf_ct_tcp: invalid state "); return -NF_ACCEPT; + case TCP_CONNTRACK_TIME_WAIT: + /* RFC5961 compliance cause stack to send "challenge-ACK" + * e.g. in response to spurious SYNs. Conntrack MUST + * not believe this ACK is acking last FIN. + */ + if (old_state == TCP_CONNTRACK_LAST_ACK && + index == TCP_ACK_SET && + ct->proto.tcp.last_dir != dir && + ct->proto.tcp.last_index == TCP_SYN_SET && + (ct->proto.tcp.last_flags & IP_CT_EXP_CHALLENGE_ACK)) { + /* Detected RFC5961 challenge ACK */ + ct->proto.tcp.last_flags &= ~IP_CT_EXP_CHALLENGE_ACK; + spin_unlock_bh(&ct->lock); + if (LOG_INVALID(net, IPPROTO_TCP)) + nf_log_packet(net, pf, 0, skb, NULL, NULL, NULL, + "nf_ct_tcp: challenge-ACK ignored "); + return NF_ACCEPT; /* Don't change state */ + } + break; case TCP_CONNTRACK_CLOSE: if (index == TCP_RST_SET && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET) From 7363cb7de3999e84243bca79ffea257fd86a2cc6 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 28 Apr 2015 18:34:23 -0300 Subject: [PATCH 555/652] MIPS: Fix up obsolete cpu_set usage cpu_set was removed (along with a bunch of cpumask helpers) by commit 2f0f267ea072 ("cpumask: remove deprecated functions."). Fix this by replacing cpu_set with cpumask_set_cpu. Without this fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y. arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup': arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration] Fixes: 90db024f140d ("MIPS: smp-cps: cpu_set FPU mask if FPU present") Signed-off-by: Ezequiel Garcia Acked-by: Niklas Cassel Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9912/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-cps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index 7e011f95bb8e..4251d390b5b6 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -92,7 +92,7 @@ static void __init cps_smp_setup(void) #ifdef CONFIG_MIPS_MT_FPAFF /* If we have an FPU, enroll ourselves in the FPU-full mask */ if (cpu_has_fpu) - cpu_set(0, mt_fpu_cpumask); + cpumask_set_cpu(0, &mt_fpu_cpumask); #endif /* CONFIG_MIPS_MT_FPAFF */ } From e05cb56821288ad972541a468570418105c30215 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 13 May 2015 11:50:55 +0100 Subject: [PATCH 556/652] MIPS: tlb-r4k: Fix PG_ELPA comment The ELPA bit in PageGrain is all about large *physical* addresses, so correct the reference to "large virtual address" in the comment above where it is set for MIPS64. Signed-off-by: James Hogan Cc: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10038/ Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r4k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index a27a088e6f9f..08318ecb803a 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -495,7 +495,7 @@ static void r4k_tlb_configure(void) if (cpu_has_rixi) { /* - * Enable the no read, no exec bits, and enable large virtual + * Enable the no read, no exec bits, and enable large physical * address. */ #ifdef CONFIG_64BIT From 8947e396a8296c5297928b60043f35dfa56baa05 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 14 May 2015 10:32:53 -0700 Subject: [PATCH 557/652] Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris Cc: Marek Vasut Cc: Rafał Miłecki Cc: Rob Herring Cc: Pawel Moll Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren Acked-by: Geert Uytterhoeven Acked-by: Mark Rutland --- .../bindings/mtd/{m25p80.txt => jedec,spi-nor.txt} | 6 +++--- drivers/mtd/devices/m25p80.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) rename Documentation/devicetree/bindings/mtd/{m25p80.txt => jedec,spi-nor.txt} (85%) diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt similarity index 85% rename from Documentation/devicetree/bindings/mtd/m25p80.txt rename to Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index f20b111b502a..2bee68103b01 100644 --- a/Documentation/devicetree/bindings/mtd/m25p80.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -8,8 +8,8 @@ Required properties: is not Linux-only, but in case of Linux, see the "m25p_ids" table in drivers/mtd/devices/m25p80.c for the list of supported chips. - Must also include "nor-jedec" for any SPI NOR flash that can be - identified by the JEDEC READ ID opcode (0x9F). + Must also include "jedec,spi-nor" for any SPI NOR flash that can + be identified by the JEDEC READ ID opcode (0x9F). - reg : Chip-Select number - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at @@ -25,7 +25,7 @@ Example: flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80", "nor-jedec"; + compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; m25p,fast-read; diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7c8b1694a134..3af137f49ac9 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -223,7 +223,7 @@ static int m25p_probe(struct spi_device *spi) */ if (data && data->type) flash_name = data->type; - else if (!strcmp(spi->modalias, "nor-jedec")) + else if (!strcmp(spi->modalias, "spi-nor")) flash_name = NULL; /* auto-detect */ else flash_name = spi->modalias; @@ -255,7 +255,7 @@ static int m25p_remove(struct spi_device *spi) * since most of these flash are compatible to some extent, and their * differences can often be differentiated by the JEDEC read-ID command, we * encourage new users to add support to the spi-nor library, and simply bind - * against a generic string here (e.g., "nor-jedec"). + * against a generic string here (e.g., "jedec,spi-nor"). * * Many flash names are kept here in this list (as well as in spi-nor.c) to * keep them available as module aliases for existing platforms. @@ -305,7 +305,7 @@ static const struct spi_device_id m25p_ids[] = { * Generic support for SPI NOR that can be identified by the JEDEC READ * ID opcode (0x9F). Use this, if possible. */ - {"nor-jedec"}, + {"spi-nor"}, { }, }; MODULE_DEVICE_TABLE(spi, m25p_ids); From 960bd2c26421d321e890f1936938196ead41976f Mon Sep 17 00:00:00 2001 From: Mirek Kratochvil Date: Fri, 15 May 2015 21:15:29 +0200 Subject: [PATCH 558/652] netfilter: nf_tables: fix bogus warning in nft_data_uninit() The values 0x00000000-0xfffffeff are reserved for userspace datatype. When, deleting set elements with maps, a bogus warning is triggered. WARNING: CPU: 0 PID: 11133 at net/netfilter/nf_tables_api.c:4481 nft_data_uninit+0x35/0x40 [nf_tables]() This fixes the check accordingly to enum definition in include/linux/netfilter/nf_tables.h Fixes: https://bugzilla.netfilter.org/show_bug.cgi?id=1013 Signed-off-by: Mirek Kratochvil Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index ad9d11fb29fd..34ded09317e7 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4472,9 +4472,9 @@ EXPORT_SYMBOL_GPL(nft_data_init); */ void nft_data_uninit(const struct nft_data *data, enum nft_data_types type) { - switch (type) { - case NFT_DATA_VALUE: + if (type < NFT_DATA_VERDICT) return; + switch (type) { case NFT_DATA_VERDICT: return nft_verdict_uninit(data); default: From 1f9993f6825f9cb93f75f794b66e7428dfc72467 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Fri, 15 May 2015 12:53:21 +0800 Subject: [PATCH 559/652] rocker: fix a neigh entry leak issue Once we get a neighbour through looking up arp cache or creating a new one in rocker_port_ipv4_resolve(), the neighbour's refcount is already taken. But as we don't put the refcount again after it's used, this makes the neighbour entry leaked. Suggested-by: Eric Dumazet Acked-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: Ying Xue Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/rocker/rocker.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/rocker/rocker.c b/drivers/net/ethernet/rocker/rocker.c index ec251531bd9f..cf98cc9bbc8d 100644 --- a/drivers/net/ethernet/rocker/rocker.c +++ b/drivers/net/ethernet/rocker/rocker.c @@ -2921,10 +2921,11 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port, struct neighbour *n = __ipv4_neigh_lookup(dev, (__force u32)ip_addr); int err = 0; - if (!n) + if (!n) { n = neigh_create(&arp_tbl, &ip_addr, dev); - if (!n) - return -ENOMEM; + if (IS_ERR(n)) + return IS_ERR(n); + } /* If the neigh is already resolved, then go ahead and * install the entry, otherwise start the ARP process to @@ -2936,6 +2937,7 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port, else neigh_event_send(n, NULL); + neigh_release(n); return err; } From 7e14069651591c81046ffaec13c3dac8cb70f5fb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 May 2015 16:30:41 -0700 Subject: [PATCH 560/652] net: phy: Allow EEE for all RGMII variants RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 52cd8db2c57d..757f28a4284c 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1053,13 +1053,14 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) { /* According to 802.3az,the EEE is supported only in full duplex-mode. * Also EEE feature is active when core is operating with MII, GMII - * or RGMII. Internal PHYs are also allowed to proceed and should - * return an error if they do not support EEE. + * or RGMII (all kinds). Internal PHYs are also allowed to proceed and + * should return an error if they do not support EEE. */ if ((phydev->duplex == DUPLEX_FULL) && ((phydev->interface == PHY_INTERFACE_MODE_MII) || (phydev->interface == PHY_INTERFACE_MODE_GMII) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII) || + (phydev->interface >= PHY_INTERFACE_MODE_RGMII && + phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) || phy_is_internal(phydev))) { int eee_lp, eee_cap, eee_adv; u32 lp, cap, adv; From c0bb07df7d981e4091432754e30c9c720e2c0c78 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 16 May 2015 21:50:28 +0800 Subject: [PATCH 561/652] netlink: Reset portid after netlink_insert failure The commit c5adde9468b0714a051eac7f9666f23eb10b61f7 ("netlink: eliminate nl_sk_hash_lock") breaks the autobind retry mechanism because it doesn't reset portid after a failed netlink_insert. This means that should autobind fail the first time around, then the socket will be stuck in limbo as it can never be bound again since it already has a non-zero portid. Fixes: c5adde9468b0 ("netlink: eliminate nl_sk_hash_lock") Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index dbe885901b34..bf6e76643f78 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1081,6 +1081,7 @@ static int netlink_insert(struct sock *sk, u32 portid) if (err) { if (err == -EEXIST) err = -EADDRINUSE; + nlk_sk(sk)->portid = 0; sock_put(sk); } From db9683fb412d4af33f66b9fe3d8dace1c6d113c9 Mon Sep 17 00:00:00 2001 From: Tim Beale Date: Wed, 13 May 2015 13:55:04 +1200 Subject: [PATCH 562/652] net: phy: Make sure PHY_RESUMING state change is always processed If phy_start_aneg() was called while the phydev is in the PHY_RESUMING state, then its state would immediately transition to PHY_AN (or PHY_FORCING). This meant the phy_state_machine() never processed the PHY_RESUMING state change, which meant interrupts weren't enabled for the PHY. If the PHY used low-power mode (i.e. using BMCR_PDOWN), then the physical link wouldn't get powered up again. There seems no point for phy_start_aneg() to make the PHY_RESUMING --> PHY_AN transition, as the state machine will do this anyway. I'm not sure about the case where autoneg is disabled, as my patch will change behaviour so that the PHY goes to PHY_NOLINK instead of PHY_FORCING. An alternative solution would be to move the phy_config_interrupt() and phy_resume() work out of the state machine and into phy_start(). The background behind this: we're running linux v3.16.7 and from user-space we want to enable the eth port (i.e. do a SIOCSIFFLAGS ioctl with the IFF_UP flag) and immediately afterward set the interface's speed/duplex. Enabling the interface calls .ndo_open() then phy_start() and the PHY transitions PHY_HALTED --> PHY_RESUMING. Setting the speed/duplex ends up calling phy_ethtool_sset(), which calls phy_start_aneg() (meanwhile the phy_state_machine() hasn't processed the PHY_RESUMING state change yet). Signed-off-by: Tim Beale Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 757f28a4284c..710696d1af97 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -465,7 +465,7 @@ int phy_start_aneg(struct phy_device *phydev) if (err < 0) goto out_unlock; - if (phydev->state != PHY_HALTED) { + if (phydev->state != PHY_HALTED && phydev->state != PHY_RESUMING) { if (AUTONEG_ENABLE == phydev->autoneg) { phydev->state = PHY_AN; phydev->link_timeout = PHY_AN_TIMEOUT; From 07ee0722bf941960fb3888f9c9b5839473372fd1 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 15 May 2015 11:30:47 +0800 Subject: [PATCH 563/652] rhashtable: Add cap on number of elements in hash table We currently have no limit on the number of elements in a hash table. This is a problem because some users (tipc) set a ceiling on the maximum table size and when that is reached the hash table may degenerate. Others may encounter OOM when growing and if we allow insertions when that happens the hash table perofrmance may also suffer. This patch adds a new paramater insecure_max_entries which becomes the cap on the table. If unset it defaults to max_size * 2. If it is also zero it means that there is no cap on the number of elements in the table. However, the table will grow whenever the utilisation hits 100% and if that growth fails, you will get ENOMEM on insertion. As allowing oversubscription is potentially dangerous, the name contains the word insecure. Note that the cap is not a hard limit. This is done for performance reasons as enforcing a hard limit will result in use of atomic ops that are heavier than the ones we currently use. The reasoning is that we're only guarding against a gross over- subscription of the table, rather than a small breach of the limit. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/rhashtable.h | 19 +++++++++++++++++++ lib/rhashtable.c | 11 +++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/linux/rhashtable.h b/include/linux/rhashtable.h index dbcbcc59aa92..843ceca9a21e 100644 --- a/include/linux/rhashtable.h +++ b/include/linux/rhashtable.h @@ -17,6 +17,7 @@ #ifndef _LINUX_RHASHTABLE_H #define _LINUX_RHASHTABLE_H +#include #include #include #include @@ -100,6 +101,7 @@ struct rhashtable; * @key_len: Length of key * @key_offset: Offset of key in struct to be hashed * @head_offset: Offset of rhash_head in struct to be hashed + * @insecure_max_entries: Maximum number of entries (may be exceeded) * @max_size: Maximum size while expanding * @min_size: Minimum size while shrinking * @nulls_base: Base value to generate nulls marker @@ -115,6 +117,7 @@ struct rhashtable_params { size_t key_len; size_t key_offset; size_t head_offset; + unsigned int insecure_max_entries; unsigned int max_size; unsigned int min_size; u32 nulls_base; @@ -286,6 +289,18 @@ static inline bool rht_grow_above_100(const struct rhashtable *ht, (!ht->p.max_size || tbl->size < ht->p.max_size); } +/** + * rht_grow_above_max - returns true if table is above maximum + * @ht: hash table + * @tbl: current table + */ +static inline bool rht_grow_above_max(const struct rhashtable *ht, + const struct bucket_table *tbl) +{ + return ht->p.insecure_max_entries && + atomic_read(&ht->nelems) >= ht->p.insecure_max_entries; +} + /* The bucket lock is selected based on the hash and protects mutations * on a group of hash buckets. * @@ -589,6 +604,10 @@ restart: goto out; } + err = -E2BIG; + if (unlikely(rht_grow_above_max(ht, tbl))) + goto out; + if (unlikely(rht_grow_above_100(ht, tbl))) { slow_path: spin_unlock_bh(lock); diff --git a/lib/rhashtable.c b/lib/rhashtable.c index b28df4019ade..4396434e4715 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -14,6 +14,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -446,6 +447,10 @@ int rhashtable_insert_slow(struct rhashtable *ht, const void *key, if (key && rhashtable_lookup_fast(ht, key, ht->p)) goto exit; + err = -E2BIG; + if (unlikely(rht_grow_above_max(ht, tbl))) + goto exit; + err = -EAGAIN; if (rhashtable_check_elasticity(ht, tbl, hash) || rht_grow_above_100(ht, tbl)) @@ -738,6 +743,12 @@ int rhashtable_init(struct rhashtable *ht, if (params->max_size) ht->p.max_size = rounddown_pow_of_two(params->max_size); + if (params->insecure_max_entries) + ht->p.insecure_max_entries = + rounddown_pow_of_two(params->insecure_max_entries); + else + ht->p.insecure_max_entries = ht->p.max_size * 2; + ht->p.min_size = max(ht->p.min_size, HASH_MIN_SIZE); /* The maximum (not average) chain length grows with the From ed2a80ab7b76f11af0b2c6255709c4ebf164b667 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 13 May 2015 14:19:42 +0200 Subject: [PATCH 564/652] rtnl/bond: don't send rtnl msg for unregistered iface Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko Reported-by: Julien Meunier Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/bonding/bond_options.c | 2 +- net/core/rtnetlink.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 4df28943d222..e8d3c1d35453 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -624,7 +624,7 @@ int __bond_opt_set(struct bonding *bond, out: if (ret) bond_opt_error_interpret(bond, opt, ret, val); - else + else if (bond->dev->reg_state == NETREG_REGISTERED) call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev); return ret; diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 666e0928ba40..8de36824018d 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2416,6 +2416,9 @@ void rtmsg_ifinfo(int type, struct net_device *dev, unsigned int change, { struct sk_buff *skb; + if (dev->reg_state != NETREG_REGISTERED) + return; + skb = rtmsg_ifinfo_build_skb(type, dev, change, flags); if (skb) rtmsg_ifinfo_send(skb, dev, flags); From 21858cd02dabcf290564cbf4769b101eba54d7bb Mon Sep 17 00:00:00 2001 From: Florent Fourcot Date: Sat, 16 May 2015 00:24:59 +0200 Subject: [PATCH 565/652] tcp/ipv6: fix flow label setting in TIME_WAIT state commit 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by: Eric Dumazet Signed-off-by: Florent Fourcot Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_minisocks.c | 2 +- net/ipv6/tcp_ipv6.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index e5d7649136fc..b5732a54f2ad 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -300,7 +300,7 @@ void tcp_time_wait(struct sock *sk, int state, int timeo) tw->tw_v6_daddr = sk->sk_v6_daddr; tw->tw_v6_rcv_saddr = sk->sk_v6_rcv_saddr; tw->tw_tclass = np->tclass; - tw->tw_flowlabel = np->flow_label >> 12; + tw->tw_flowlabel = be32_to_cpu(np->flow_label & IPV6_FLOWLABEL_MASK); tw->tw_ipv6only = sk->sk_ipv6only; } #endif diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index b6575d665568..3adffb300238 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -914,7 +914,7 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb) tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale, tcp_time_stamp + tcptw->tw_ts_offset, tcptw->tw_ts_recent, tw->tw_bound_dev_if, tcp_twsk_md5_key(tcptw), - tw->tw_tclass, (tw->tw_flowlabel << 12)); + tw->tw_tclass, cpu_to_be32(tw->tw_flowlabel)); inet_twsk_put(tw); } From 7b2a18e05feb86f9be25602abfa9604a6b977f79 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Fri, 15 May 2015 10:18:37 -0700 Subject: [PATCH 566/652] crypto: algif_aead - fix invalid sgl linking This patch fixes it. Also minor updates to comments. Signed-off-by: Tadeusz Struk Signed-off-by: Herbert Xu --- crypto/algif_aead.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c index 00a6fe166fed..69abada22373 100644 --- a/crypto/algif_aead.c +++ b/crypto/algif_aead.c @@ -33,7 +33,7 @@ struct aead_ctx { /* * RSGL_MAX_ENTRIES is an artificial limit where user space at maximum * can cause the kernel to allocate RSGL_MAX_ENTRIES * ALG_MAX_PAGES - * bytes + * pages */ #define RSGL_MAX_ENTRIES ALG_MAX_PAGES struct af_alg_sgl rsgl[RSGL_MAX_ENTRIES]; @@ -435,11 +435,10 @@ static int aead_recvmsg(struct socket *sock, struct msghdr *msg, size_t ignored, if (err < 0) goto unlock; usedpages += err; - /* chain the new scatterlist with initial list */ + /* chain the new scatterlist with previous one */ if (cnt) - scatterwalk_crypto_chain(ctx->rsgl[0].sg, - ctx->rsgl[cnt].sg, 1, - sg_nents(ctx->rsgl[cnt-1].sg)); + af_alg_link_sg(&ctx->rsgl[cnt-1], &ctx->rsgl[cnt]); + /* we do not need more iovecs as we have sufficient memory */ if (outlen <= usedpages) break; From 1f8b46cdc806dfd76386f8442d9a6d0ae69abb25 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 12 May 2015 14:38:15 +0200 Subject: [PATCH 567/652] ALSA: hda - Fix headset mic and mic-in for a Dell desktop ALC662 does not need any special verbs to change the jack functionality, and enables mic in through the headphone jack mode by changing the direction of the headphone pin node. BugLink: https://bugs.launchpad.net/bugs/1454235 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 46 ++++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 37c2c9f91df0..4202a80db2ce 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3674,6 +3674,10 @@ static void alc_headset_mode_mic_in(struct hda_codec *codec, hda_nid_t hp_pin, alc_process_coef_fw(codec, coef0293); snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50); break; + case 0x10ec0662: + snd_hda_set_pin_ctl_cache(codec, hp_pin, 0); + snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50); + break; case 0x10ec0668: alc_write_coef_idx(codec, 0x11, 0x0001); snd_hda_set_pin_ctl_cache(codec, hp_pin, 0); @@ -4012,7 +4016,7 @@ static void alc_update_headset_mode(struct hda_codec *codec) if (new_headset_mode != ALC_HEADSET_MODE_MIC) { snd_hda_set_pin_ctl_cache(codec, hp_pin, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN); - if (spec->headphone_mic_pin) + if (spec->headphone_mic_pin && spec->headphone_mic_pin != hp_pin) snd_hda_set_pin_ctl_cache(codec, spec->headphone_mic_pin, PIN_VREFHIZ); } @@ -4215,6 +4219,18 @@ static void alc_fixup_dell_xps13(struct hda_codec *codec, } } +static void alc_fixup_headset_mode_alc662(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) { + spec->parse_flags |= HDA_PINCFG_HEADSET_MIC; + spec->gen.hp_mic = 1; /* Mic-in is same pin as headphone */ + } else + alc_fixup_headset_mode(codec, fix, action); +} + static void alc_fixup_headset_mode_alc668(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -6087,7 +6103,9 @@ enum { ALC662_FIXUP_NO_JACK_DETECT, ALC662_FIXUP_ZOTAC_Z68, ALC662_FIXUP_INV_DMIC, + ALC662_FIXUP_DELL_MIC_NO_PRESENCE, ALC668_FIXUP_DELL_MIC_NO_PRESENCE, + ALC662_FIXUP_HEADSET_MODE, ALC668_FIXUP_HEADSET_MODE, ALC662_FIXUP_BASS_MODE4_CHMAP, ALC662_FIXUP_BASS_16, @@ -6280,6 +6298,20 @@ static const struct hda_fixup alc662_fixups[] = { .chained = true, .chain_id = ALC668_FIXUP_DELL_MIC_NO_PRESENCE }, + [ALC662_FIXUP_DELL_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x03a1113c }, /* use as headset mic, without its own jack detect */ + /* headphone mic by setting pin control of 0x1b (headphone out) to in + vref_50 */ + { } + }, + .chained = true, + .chain_id = ALC662_FIXUP_HEADSET_MODE + }, + [ALC662_FIXUP_HEADSET_MODE] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_headset_mode_alc662, + }, [ALC668_FIXUP_DELL_MIC_NO_PRESENCE] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -6431,6 +6463,18 @@ static const struct hda_model_fixup alc662_fixup_models[] = { }; static const struct snd_hda_pin_quirk alc662_pin_fixup_tbl[] = { + SND_HDA_PIN_QUIRK(0x10ec0662, 0x1028, "Dell", ALC662_FIXUP_DELL_MIC_NO_PRESENCE, + {0x12, 0x4004c000}, + {0x14, 0x01014010}, + {0x15, 0x411111f0}, + {0x16, 0x411111f0}, + {0x18, 0x01a19020}, + {0x19, 0x411111f0}, + {0x1a, 0x0181302f}, + {0x1b, 0x0221401f}, + {0x1c, 0x411111f0}, + {0x1d, 0x4054c601}, + {0x1e, 0x411111f0}), SND_HDA_PIN_QUIRK(0x10ec0668, 0x1028, "Dell", ALC668_FIXUP_AUTO_MUTE, {0x12, 0x99a30130}, {0x14, 0x90170110}, From 6ffc0898b29a2811a6c0569c5dd9b581980110df Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 13 May 2015 13:28:54 +0200 Subject: [PATCH 568/652] ALSA: hda - Add Conexant codecs CX20721, CX20722, CX20723 and CX20724 This patch adds support for Conexant HD Audio codecs CX20721, CX20722, CX20723 and CX20724. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1454656 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index f8f0dfbef149..78b719b5b34d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -968,6 +968,14 @@ static const struct hda_codec_preset snd_hda_preset_conexant[] = { .patch = patch_conexant_auto }, { .id = 0x14f150b9, .name = "CX20665", .patch = patch_conexant_auto }, + { .id = 0x14f150f1, .name = "CX20721", + .patch = patch_conexant_auto }, + { .id = 0x14f150f2, .name = "CX20722", + .patch = patch_conexant_auto }, + { .id = 0x14f150f3, .name = "CX20723", + .patch = patch_conexant_auto }, + { .id = 0x14f150f4, .name = "CX20724", + .patch = patch_conexant_auto }, { .id = 0x14f1510f, .name = "CX20751/2", .patch = patch_conexant_auto }, { .id = 0x14f15110, .name = "CX20751/2", @@ -1002,6 +1010,10 @@ MODULE_ALIAS("snd-hda-codec-id:14f150ab"); MODULE_ALIAS("snd-hda-codec-id:14f150ac"); MODULE_ALIAS("snd-hda-codec-id:14f150b8"); MODULE_ALIAS("snd-hda-codec-id:14f150b9"); +MODULE_ALIAS("snd-hda-codec-id:14f150f1"); +MODULE_ALIAS("snd-hda-codec-id:14f150f2"); +MODULE_ALIAS("snd-hda-codec-id:14f150f3"); +MODULE_ALIAS("snd-hda-codec-id:14f150f4"); MODULE_ALIAS("snd-hda-codec-id:14f1510f"); MODULE_ALIAS("snd-hda-codec-id:14f15110"); MODULE_ALIAS("snd-hda-codec-id:14f15111"); From 09ea997677cd44ebe7f42573119aaf46b775c683 Mon Sep 17 00:00:00 2001 From: Ansgar Hegerfeld Date: Thu, 14 May 2015 12:31:32 +0200 Subject: [PATCH 569/652] ALSA: hda/realtek - ALC292 dock fix for Thinkpad L450 The Lenovo ThinkPad L450 requires the ALC292_FIXUP_TPT440_DOCK fix in order to get sound output on the docking stations audio port. This patch was tested using a ThinkPad L450 (20DSS00B00) using kernel 4.0.3 and a ThinkPad Pro Dock. Signed-off-by: Ansgar Hegerfeld Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4202a80db2ce..2e246fe495f6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5165,6 +5165,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x5026, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x5034, "Thinkpad T450", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x5036, "Thinkpad T450s", ALC292_FIXUP_TPT440_DOCK), + SND_PCI_QUIRK(0x17aa, 0x503c, "Thinkpad L450", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), From 60c8f783a18feb95ad967c87e9660caf09fb4700 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 6 May 2015 15:16:46 +0200 Subject: [PATCH 570/652] mmc: atmel-mci: fix bad variable type for clkdiv clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by: Ludovic Desroches Cc: # 3.4 and later Signed-off-by: Ulf Hansson --- drivers/mmc/host/atmel-mci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 03d7c7521d97..9a39e0b7e583 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1304,7 +1304,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->clock) { unsigned int clock_min = ~0U; - u32 clkdiv; + int clkdiv; spin_lock_bh(&host->lock); if (!host->mode_reg) { @@ -1328,7 +1328,12 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* Calculate clock divider */ if (host->caps.has_odd_clk_div) { clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2; - if (clkdiv > 511) { + if (clkdiv < 0) { + dev_warn(&mmc->class_dev, + "clock %u too fast; using %lu\n", + clock_min, host->bus_hz / 2); + clkdiv = 0; + } else if (clkdiv > 511) { dev_warn(&mmc->class_dev, "clock %u too slow; using %lu\n", clock_min, host->bus_hz / (511 + 2)); From ffb7dbed47da6ac4460b606a3feee295bbe4d9e2 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Thu, 7 May 2015 12:55:23 -0400 Subject: [PATCH 571/652] xen/arm: Define xen_arch_suspend() Commit 2b953a5e994c ("xen: Suspend ticks on all CPUs during suspend") introduced xen_arch_suspend() routine but did so only for x86, breaking ARM builds. We need to add it to ARM as well. Signed-off-by: Boris Ostrovsky Reported-by: Michal Suchanek Tested-by: Stefano Stabellini Signed-off-by: David Vrabel --- arch/arm/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 224081ccc92f..7d0f07020c80 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -272,6 +272,7 @@ void xen_arch_pre_suspend(void) { } void xen_arch_post_suspend(int suspend_cancelled) { } void xen_timer_resume(void) { } void xen_arch_resume(void) { } +void xen_arch_suspend(void) { } /* In the hypervisor.S file. */ From 314fdf4473bc05fa9a1f33b27b98eb0f0c836f71 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Tue, 19 May 2015 11:32:32 +0530 Subject: [PATCH 572/652] RDMA/ocrdma: Fix EQ destroy failure during driver unload Changing the destroy sequence of mailbox queue and event queues. FW expects mailbox queue to be destroyed before desroying the EQs. Signed-off-by: Selvin Xavier Signed-off-by: Devesh Sharma Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 0c9e95909a64..3a5ea5afc2a2 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -3147,9 +3147,9 @@ void ocrdma_cleanup_hw(struct ocrdma_dev *dev) ocrdma_free_pd_pool(dev); ocrdma_mbx_delete_ah_tbl(dev); - /* cleanup the eqs */ - ocrdma_destroy_eqs(dev); - /* cleanup the control path */ ocrdma_destroy_mq(dev); + + /* cleanup the eqs */ + ocrdma_destroy_eqs(dev); } From 5e6f9237f8e676e8a9110b4dafed36b1dd0b5d84 Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Tue, 19 May 2015 11:32:33 +0530 Subject: [PATCH 573/652] RDMA/ocrdma: Report EQ full fatal error Detect when Event Queue (EQ) becomes full and print a warning message. Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 6 ++++++ drivers/infiniband/hw/ocrdma/ocrdma_sli.h | 7 +++++++ 2 files changed, 13 insertions(+) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 3a5ea5afc2a2..65759acb12dc 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -933,12 +933,18 @@ static irqreturn_t ocrdma_irq_handler(int irq, void *handle) struct ocrdma_eqe eqe; struct ocrdma_eqe *ptr; u16 cq_id; + u8 mcode; int budget = eq->cq_cnt; do { ptr = ocrdma_get_eqe(eq); eqe = *ptr; ocrdma_le32_to_cpu(&eqe, sizeof(eqe)); + mcode = (eqe.id_valid & OCRDMA_EQE_MAJOR_CODE_MASK) + >> OCRDMA_EQE_MAJOR_CODE_SHIFT; + if (mcode == OCRDMA_MAJOR_CODE_SENTINAL) + pr_err("EQ full on eqid = 0x%x, eqe = 0x%x\n", + eq->q.id, eqe.id_valid); if ((eqe.id_valid & OCRDMA_EQE_VALID_MASK) == 0) break; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h index 243c87c8bd65..baf9b8a0f278 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h @@ -1624,12 +1624,19 @@ struct ocrdma_delete_ah_tbl_rsp { enum { OCRDMA_EQE_VALID_SHIFT = 0, OCRDMA_EQE_VALID_MASK = BIT(0), + OCRDMA_EQE_MAJOR_CODE_MASK = 0x0E, + OCRDMA_EQE_MAJOR_CODE_SHIFT = 0x01, OCRDMA_EQE_FOR_CQE_MASK = 0xFFFE, OCRDMA_EQE_RESOURCE_ID_SHIFT = 16, OCRDMA_EQE_RESOURCE_ID_MASK = 0xFFFF << OCRDMA_EQE_RESOURCE_ID_SHIFT, }; +enum major_code { + OCRDMA_MAJOR_CODE_COMPLETION = 0x00, + OCRDMA_MAJOR_CODE_SENTINAL = 0x01 +}; + struct ocrdma_eqe { u32 id_valid; }; From fe48822bc6d5b455aab963038a9c776d641645cc Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Tue, 19 May 2015 11:32:34 +0530 Subject: [PATCH 574/652] RDMA/ocrdma: Fix QP state transition in destroy_qp Don't move QP to error state, if QP is in reset state during QP destroy operation. Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index 877175563634..06e8ab7825b9 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -1721,18 +1721,20 @@ int ocrdma_destroy_qp(struct ib_qp *ibqp) struct ocrdma_qp *qp; struct ocrdma_dev *dev; struct ib_qp_attr attrs; - int attr_mask = IB_QP_STATE; + int attr_mask; unsigned long flags; qp = get_ocrdma_qp(ibqp); dev = get_ocrdma_dev(ibqp->device); - attrs.qp_state = IB_QPS_ERR; pd = qp->pd; /* change the QP state to ERROR */ - _ocrdma_modify_qp(ibqp, &attrs, attr_mask); - + if (qp->state != OCRDMA_QPS_RST) { + attrs.qp_state = IB_QPS_ERR; + attr_mask = IB_QP_STATE; + _ocrdma_modify_qp(ibqp, &attrs, attr_mask); + } /* ensure that CQEs for newly created QP (whose id may be same with * one which just getting destroyed are same), dont get * discarded until the old CQEs are discarded. From 6f5deab0bed6bcfad0dbafcb40a1e269a01ab01d Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Tue, 19 May 2015 11:32:35 +0530 Subject: [PATCH 575/652] RDMA/ocrdma: Use VID 0 if PFC is enabled and vlan is not configured If the adapter ports are in PFC mode and VLAN is not configured, use vlan tag 0 for RoCE traffic. Also, log an advisory message in system logs. Signed-off-by: Padmanabh Ratnakar Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_ah.c | 8 +++++++- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 12 +++++++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c index d812904f3984..2a5993b75651 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c @@ -56,7 +56,13 @@ static inline int set_av_attr(struct ocrdma_dev *dev, struct ocrdma_ah *ah, vlan_tag = attr->vlan_id; if (!vlan_tag || (vlan_tag > 0xFFF)) vlan_tag = dev->pvid; - if (vlan_tag && (vlan_tag < 0x1000)) { + if (vlan_tag || dev->pfc_state) { + if (!vlan_tag) { + pr_err("ocrdma%d:Using VLAN with PFC is recommended\n", + dev->id); + pr_err("ocrdma%d:Using VLAN 0 for this connection\n", + dev->id); + } eth.eth_type = cpu_to_be16(0x8100); eth.roce_eth_type = cpu_to_be16(OCRDMA_ROCE_ETH_TYPE); vlan_tag |= (dev->sl & 0x07) << OCRDMA_VID_PCP_SHIFT; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 65759acb12dc..da688d78fc02 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -2434,7 +2434,7 @@ static int ocrdma_set_av_params(struct ocrdma_qp *qp, int status; struct ib_ah_attr *ah_attr = &attrs->ah_attr; union ib_gid sgid, zgid; - u32 vlan_id; + u32 vlan_id = 0xFFFF; u8 mac_addr[6]; struct ocrdma_dev *dev = get_ocrdma_dev(qp->ibqp.device); @@ -2474,12 +2474,22 @@ static int ocrdma_set_av_params(struct ocrdma_qp *qp, cmd->params.vlan_dmac_b4_to_b5 = mac_addr[4] | (mac_addr[5] << 8); if (attr_mask & IB_QP_VID) { vlan_id = attrs->vlan_id; + } else if (dev->pfc_state) { + vlan_id = 0; + pr_err("ocrdma%d:Using VLAN with PFC is recommended\n", + dev->id); + pr_err("ocrdma%d:Using VLAN 0 for this connection\n", + dev->id); + } + + if (vlan_id < 0x1000) { cmd->params.vlan_dmac_b4_to_b5 |= vlan_id << OCRDMA_QP_PARAMS_VLAN_SHIFT; cmd->flags |= OCRDMA_QP_PARA_VLAN_EN_VALID; cmd->params.rnt_rc_sl_fl |= (dev->sl & 0x07) << OCRDMA_QP_PARAMS_SL_SHIFT; } + return 0; } From 038ab8b7432c0280f064a47173dc5b6412243674 Mon Sep 17 00:00:00 2001 From: Mitesh Ahuja Date: Tue, 19 May 2015 11:32:36 +0530 Subject: [PATCH 576/652] RDMA/ocrdma: Fix the request length for RDMA_QUERY_QP mailbox command to FW. Fix ocrdma_query_qp to pass correct mailbox request length to FW. Signed-off-by: Mitesh Ahuja Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_sli.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index da688d78fc02..5636eb6f9307 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -2412,7 +2412,7 @@ int ocrdma_mbx_query_qp(struct ocrdma_dev *dev, struct ocrdma_qp *qp, struct ocrdma_query_qp *cmd; struct ocrdma_query_qp_rsp *rsp; - cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_QUERY_QP, sizeof(*cmd)); + cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_QUERY_QP, sizeof(*rsp)); if (!cmd) return status; cmd->qp_id = qp->id; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h index baf9b8a0f278..02ad0aee99af 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h @@ -1176,6 +1176,8 @@ struct ocrdma_query_qp_rsp { struct ocrdma_mqe_hdr hdr; struct ocrdma_mbx_rsp rsp; struct ocrdma_qp_params params; + u32 dpp_credits_cqid; + u32 rbq_id; }; enum { From 59582d86e23f30466413a04cc4db678b09f937ea Mon Sep 17 00:00:00 2001 From: Mitesh Ahuja Date: Tue, 19 May 2015 11:32:37 +0530 Subject: [PATCH 577/652] RDMA/ocrdma: Prevent allocation of DPP PDs if FW doesnt support it If DPP PDs are not supported by the FW, allocate only normal PDs. Signed-off-by: Mitesh Ahuja Signed-off-by: Padmanabh Ratnakar Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 51 ++++++++++----------- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +- 2 files changed, 26 insertions(+), 27 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 5636eb6f9307..ac7347ad90be 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -1440,27 +1440,30 @@ static int ocrdma_mbx_alloc_pd_range(struct ocrdma_dev *dev) struct ocrdma_alloc_pd_range_rsp *rsp; /* Pre allocate the DPP PDs */ - cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_ALLOC_PD_RANGE, sizeof(*cmd)); - if (!cmd) - return -ENOMEM; - cmd->pd_count = dev->attr.max_dpp_pds; - cmd->enable_dpp_rsvd |= OCRDMA_ALLOC_PD_ENABLE_DPP; - status = ocrdma_mbx_cmd(dev, (struct ocrdma_mqe *)cmd); - if (status) - goto mbx_err; - rsp = (struct ocrdma_alloc_pd_range_rsp *)cmd; + if (dev->attr.max_dpp_pds) { + cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_ALLOC_PD_RANGE, + sizeof(*cmd)); + if (!cmd) + return -ENOMEM; + cmd->pd_count = dev->attr.max_dpp_pds; + cmd->enable_dpp_rsvd |= OCRDMA_ALLOC_PD_ENABLE_DPP; + status = ocrdma_mbx_cmd(dev, (struct ocrdma_mqe *)cmd); + rsp = (struct ocrdma_alloc_pd_range_rsp *)cmd; - if ((rsp->dpp_page_pdid & OCRDMA_ALLOC_PD_RSP_DPP) && rsp->pd_count) { - dev->pd_mgr->dpp_page_index = rsp->dpp_page_pdid >> - OCRDMA_ALLOC_PD_RSP_DPP_PAGE_SHIFT; - dev->pd_mgr->pd_dpp_start = rsp->dpp_page_pdid & - OCRDMA_ALLOC_PD_RNG_RSP_START_PDID_MASK; - dev->pd_mgr->max_dpp_pd = rsp->pd_count; - pd_bitmap_size = BITS_TO_LONGS(rsp->pd_count) * sizeof(long); - dev->pd_mgr->pd_dpp_bitmap = kzalloc(pd_bitmap_size, - GFP_KERNEL); + if (!status && (rsp->dpp_page_pdid & OCRDMA_ALLOC_PD_RSP_DPP) && + rsp->pd_count) { + dev->pd_mgr->dpp_page_index = rsp->dpp_page_pdid >> + OCRDMA_ALLOC_PD_RSP_DPP_PAGE_SHIFT; + dev->pd_mgr->pd_dpp_start = rsp->dpp_page_pdid & + OCRDMA_ALLOC_PD_RNG_RSP_START_PDID_MASK; + dev->pd_mgr->max_dpp_pd = rsp->pd_count; + pd_bitmap_size = + BITS_TO_LONGS(rsp->pd_count) * sizeof(long); + dev->pd_mgr->pd_dpp_bitmap = kzalloc(pd_bitmap_size, + GFP_KERNEL); + } + kfree(cmd); } - kfree(cmd); cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_ALLOC_PD_RANGE, sizeof(*cmd)); if (!cmd) @@ -1468,10 +1471,8 @@ static int ocrdma_mbx_alloc_pd_range(struct ocrdma_dev *dev) cmd->pd_count = dev->attr.max_pd - dev->attr.max_dpp_pds; status = ocrdma_mbx_cmd(dev, (struct ocrdma_mqe *)cmd); - if (status) - goto mbx_err; rsp = (struct ocrdma_alloc_pd_range_rsp *)cmd; - if (rsp->pd_count) { + if (!status && rsp->pd_count) { dev->pd_mgr->pd_norm_start = rsp->dpp_page_pdid & OCRDMA_ALLOC_PD_RNG_RSP_START_PDID_MASK; dev->pd_mgr->max_normal_pd = rsp->pd_count; @@ -1479,15 +1480,13 @@ static int ocrdma_mbx_alloc_pd_range(struct ocrdma_dev *dev) dev->pd_mgr->pd_norm_bitmap = kzalloc(pd_bitmap_size, GFP_KERNEL); } + kfree(cmd); if (dev->pd_mgr->pd_norm_bitmap || dev->pd_mgr->pd_dpp_bitmap) { /* Enable PD resource manager */ dev->pd_mgr->pd_prealloc_valid = true; - } else { - return -ENOMEM; + return 0; } -mbx_err: - kfree(cmd); return status; } diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index 06e8ab7825b9..9dcb66077d6c 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -365,7 +365,7 @@ static struct ocrdma_pd *_ocrdma_alloc_pd(struct ocrdma_dev *dev, if (!pd) return ERR_PTR(-ENOMEM); - if (udata && uctx) { + if (udata && uctx && dev->attr.max_dpp_pds) { pd->dpp_enabled = ocrdma_get_asic_type(dev) == OCRDMA_ASIC_GEN_SKH_R; pd->num_dpp_qp = From d27b2f15eb535b4f02a75070108c08cefb540257 Mon Sep 17 00:00:00 2001 From: Mitesh Ahuja Date: Tue, 19 May 2015 11:32:38 +0530 Subject: [PATCH 578/652] RDMA/ocrdma: Fix dmac resolution for link local address rdma_addr_find_dmac_by_grh fails to resolve dmac for link local address. Use rdma_get_ll_mac to resolve the link local address. Signed-off-by: Padmanabh Ratnakar Signed-off-by: Mitesh Ahuja Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma.h | 2 ++ drivers/infiniband/hw/ocrdma/ocrdma_ah.c | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h index c9780d919769..ee9e3351a64c 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma.h @@ -515,6 +515,8 @@ static inline int ocrdma_resolve_dmac(struct ocrdma_dev *dev, memcpy(&in6, ah_attr->grh.dgid.raw, sizeof(in6)); if (rdma_is_multicast_addr(&in6)) rdma_get_mcast_mac(&in6, mac_addr); + else if (rdma_link_local_addr(&in6)) + rdma_get_ll_mac(&in6, mac_addr); else memcpy(mac_addr, ah_attr->dmac, ETH_ALEN); return 0; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c index 2a5993b75651..f5a5ea836dbd 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c @@ -127,7 +127,9 @@ struct ib_ah *ocrdma_create_ah(struct ib_pd *ibpd, struct ib_ah_attr *attr) goto av_conf_err; } - if (pd->uctx) { + if ((pd->uctx) && + (!rdma_is_multicast_addr((struct in6_addr *)attr->grh.dgid.raw)) && + (!rdma_link_local_addr((struct in6_addr *)attr->grh.dgid.raw))) { status = rdma_addr_find_dmac_by_grh(&sgid, &attr->grh.dgid, attr->dmac, &attr->vlan_id); if (status) { From 72d8a013d75fc845a34451bdce3d3a3dd97488f1 Mon Sep 17 00:00:00 2001 From: Naga Irrinki Date: Tue, 19 May 2015 11:32:39 +0530 Subject: [PATCH 579/652] RDMA/ocrdma: Fail connection for MTU lesser than 512 HW currently restricts the IB MTU range between 512 and 4096. Fail connection for MTUs lesser than 512. Signed-off-by: Naga Irrinki Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index ac7347ad90be..47615ff33bc6 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -2534,8 +2534,10 @@ static int ocrdma_set_qp_params(struct ocrdma_qp *qp, cmd->flags |= OCRDMA_QP_PARA_DST_QPN_VALID; } if (attr_mask & IB_QP_PATH_MTU) { - if (attrs->path_mtu < IB_MTU_256 || + if (attrs->path_mtu < IB_MTU_512 || attrs->path_mtu > IB_MTU_4096) { + pr_err("ocrdma%d: IB MTU %d is not supported\n", + dev->id, ib_mtu_enum_to_int(attrs->path_mtu)); status = -EINVAL; goto pmtu_err; } From 235dfcd47e4442b2d8766bed3ebaf655b36c7f1c Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Tue, 19 May 2015 11:32:40 +0530 Subject: [PATCH 580/652] RDMA/ocrdma: Update ocrdma version number Updating the driver version to 10.6.0.0 Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h index ee9e3351a64c..b396344fae16 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma.h @@ -40,7 +40,7 @@ #include #include "ocrdma_sli.h" -#define OCRDMA_ROCE_DRV_VERSION "10.4.205.0u" +#define OCRDMA_ROCE_DRV_VERSION "10.6.0.0" #define OCRDMA_ROCE_DRV_DESC "Emulex OneConnect RoCE Driver" #define OCRDMA_NODE_DESC "Emulex OneConnect RoCE HCA" From ab992dc38f9ae40b3ab996d68449692d464c98cf Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 May 2015 11:31:50 +0200 Subject: [PATCH 581/652] watchdog: Fix merge 'conflict' Two watchdog changes that came through different trees had a non conflicting conflict, that is, one changed the semantics of a variable but no actual code conflict happened. So the merge appeared fine, but the resulting code did not behave as expected. Commit 195daf665a62 ("watchdog: enable the new user interface of the watchdog mechanism") changes the semantics of watchdog_user_enabled, which thereafter is only used by the functions introduced by b3738d293233 ("watchdog: Add watchdog enable/disable all functions"). There further appears to be a distinct lack of serialization between setting and using watchdog_enabled, so perhaps we should wrap the {en,dis}able_all() things in watchdog_proc_mutex. This patch fixes a s2r failure reported by Michal; which I cannot readily explain. But this does make the code internally consistent again. Reported-and-tested-by: Michal Hocko Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Linus Torvalds --- kernel/watchdog.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 2316f50b07a4..506edcc500c4 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -41,6 +41,8 @@ #define NMI_WATCHDOG_ENABLED (1 << NMI_WATCHDOG_ENABLED_BIT) #define SOFT_WATCHDOG_ENABLED (1 << SOFT_WATCHDOG_ENABLED_BIT) +static DEFINE_MUTEX(watchdog_proc_mutex); + #ifdef CONFIG_HARDLOCKUP_DETECTOR static unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED|NMI_WATCHDOG_ENABLED; #else @@ -608,26 +610,36 @@ void watchdog_nmi_enable_all(void) { int cpu; - if (!watchdog_user_enabled) - return; + mutex_lock(&watchdog_proc_mutex); + + if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) + goto unlock; get_online_cpus(); for_each_online_cpu(cpu) watchdog_nmi_enable(cpu); put_online_cpus(); + +unlock: + mutex_lock(&watchdog_proc_mutex); } void watchdog_nmi_disable_all(void) { int cpu; + mutex_lock(&watchdog_proc_mutex); + if (!watchdog_running) - return; + goto unlock; get_online_cpus(); for_each_online_cpu(cpu) watchdog_nmi_disable(cpu); put_online_cpus(); + +unlock: + mutex_unlock(&watchdog_proc_mutex); } #else static int watchdog_nmi_enable(unsigned int cpu) { return 0; } @@ -744,8 +756,6 @@ static int proc_watchdog_update(void) } -static DEFINE_MUTEX(watchdog_proc_mutex); - /* * common function for watchdog, nmi_watchdog and soft_watchdog parameter * From e26081808edadfd257c6c9d81014e3b25e9a6118 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 18 May 2015 10:13:47 -0700 Subject: [PATCH 582/652] Linux 4.1-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index eae539d69bf3..dc20bcb9b271 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Hurr durr I'ma sheep # *DOCUMENTATION* From 13c3ed6a92724d8c8cb148a14b0ae190ddfe7413 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 18 May 2015 13:51:24 -0400 Subject: [PATCH 583/652] vxlan: correct typo in call to unregister_netdevice_queue By inspection, this appears to be a typo. The gating comparison involves vxlan->dev rather than dev. In fact, dev is the iterator in the preceding loop above but it is actually constant in the 2nd loop. Use of dev seems to be a bad cut-n-paste from the prior call to unregister_netdevice_queue. Change dev to vxlan->dev, since that is what is actually being checked. Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 27a5f954f8e9..21a0fbf1ed94 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2961,7 +2961,7 @@ static void __net_exit vxlan_exit_net(struct net *net) * to the list by the previous loop. */ if (!net_eq(dev_net(vxlan->dev), net)) - unregister_netdevice_queue(dev, &list); + unregister_netdevice_queue(vxlan->dev, &list); } unregister_netdevice_many(&list); From 10d784eae2b41e25d8fc6a88096cd27286093c84 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 8 May 2015 10:51:29 -0700 Subject: [PATCH 584/652] sched: always use blk_schedule_flush_plug in io_schedule_out block plug callback could sleep, so we introduce a parameter 'from_schedule' and corresponding drivers can use it to destinguish a schedule plug flush or a plug finish. Unfortunately io_schedule_out still uses blk_flush_plug(). This causes below output (Note, I added a might_sleep() in raid1_unplug to make it trigger faster, but the whole thing doesn't matter if I add might_sleep). In raid1/10, this can cause deadlock. This patch makes io_schedule_out always uses blk_schedule_flush_plug. This should only impact drivers (as far as I know, raid 1/10) which are sensitive to the 'from_schedule' parameter. [ 370.817949] ------------[ cut here ]------------ [ 370.817960] WARNING: CPU: 7 PID: 145 at ../kernel/sched/core.c:7306 __might_sleep+0x7f/0x90() [ 370.817969] do not call blocking ops when !TASK_RUNNING; state=2 set at [] prepare_to_wait+0x2f/0x90 [ 370.817971] Modules linked in: raid1 [ 370.817976] CPU: 7 PID: 145 Comm: kworker/u16:9 Tainted: G W 4.0.0+ #361 [ 370.817977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014 [ 370.817983] Workqueue: writeback bdi_writeback_workfn (flush-9:1) [ 370.817985] ffffffff81cd83be ffff8800ba8cb298 ffffffff819dd7af 0000000000000001 [ 370.817988] ffff8800ba8cb2e8 ffff8800ba8cb2d8 ffffffff81051afc ffff8800ba8cb2c8 [ 370.817990] ffffffffa00061a8 000000000000041e 0000000000000000 ffff8800ba8cba28 [ 370.817993] Call Trace: [ 370.817999] [] dump_stack+0x4f/0x7b [ 370.818002] [] warn_slowpath_common+0x8c/0xd0 [ 370.818004] [] warn_slowpath_fmt+0x46/0x50 [ 370.818006] [] ? prepare_to_wait+0x2f/0x90 [ 370.818008] [] ? prepare_to_wait+0x2f/0x90 [ 370.818010] [] __might_sleep+0x7f/0x90 [ 370.818014] [] raid1_unplug+0xd3/0x170 [raid1] [ 370.818024] [] blk_flush_plug_list+0x8a/0x1e0 [ 370.818028] [] ? bit_wait+0x50/0x50 [ 370.818031] [] io_schedule_timeout+0x130/0x140 [ 370.818033] [] bit_wait_io+0x36/0x50 [ 370.818034] [] __wait_on_bit+0x65/0x90 [ 370.818041] [] ? ext4_read_block_bitmap_nowait+0xbc/0x630 [ 370.818043] [] ? bit_wait+0x50/0x50 [ 370.818045] [] out_of_line_wait_on_bit+0x72/0x80 [ 370.818047] [] ? autoremove_wake_function+0x40/0x40 [ 370.818050] [] __wait_on_buffer+0x44/0x50 [ 370.818053] [] ext4_wait_block_bitmap+0xe0/0xf0 [ 370.818058] [] ext4_mb_init_cache+0x206/0x790 [ 370.818062] [] ? lru_cache_add+0x1c/0x50 [ 370.818064] [] ext4_mb_init_group+0x11e/0x200 [ 370.818066] [] ext4_mb_load_buddy+0x341/0x360 [ 370.818068] [] ext4_mb_find_by_goal+0x93/0x2f0 [ 370.818070] [] ? ext4_mb_normalize_request+0x1e4/0x5b0 [ 370.818072] [] ext4_mb_regular_allocator+0x67/0x460 [ 370.818074] [] ? ext4_mb_normalize_request+0x1e4/0x5b0 [ 370.818076] [] ext4_mb_new_blocks+0x4cb/0x620 [ 370.818079] [] ext4_ext_map_blocks+0x4c6/0x14d0 [ 370.818081] [] ? ext4_es_lookup_extent+0x4e/0x290 [ 370.818085] [] ext4_map_blocks+0x14d/0x4f0 [ 370.818088] [] ext4_writepages+0x76d/0xe50 [ 370.818094] [] do_writepages+0x21/0x50 [ 370.818097] [] __writeback_single_inode+0x60/0x490 [ 370.818099] [] writeback_sb_inodes+0x2da/0x590 [ 370.818103] [] ? trylock_super+0x1b/0x50 [ 370.818105] [] ? trylock_super+0x1b/0x50 [ 370.818107] [] __writeback_inodes_wb+0x9f/0xd0 [ 370.818109] [] wb_writeback+0x34b/0x3c0 [ 370.818111] [] bdi_writeback_workfn+0x23f/0x550 [ 370.818116] [] process_one_work+0x1c8/0x570 [ 370.818117] [] ? process_one_work+0x14b/0x570 [ 370.818119] [] worker_thread+0x11b/0x470 [ 370.818121] [] ? process_one_work+0x570/0x570 [ 370.818124] [] kthread+0xf8/0x110 [ 370.818126] [] ? kthread_create_on_node+0x210/0x210 [ 370.818129] [] ret_from_fork+0x42/0x70 [ 370.818131] [] ? kthread_create_on_node+0x210/0x210 [ 370.818132] ---[ end trace 7b4deb71e68b6605 ]--- V2: don't change ->in_iowait Cc: NeilBrown Signed-off-by: Shaohua Li Reviewed-by: Jeff Moyer Signed-off-by: Jens Axboe --- kernel/sched/core.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index fe22f7510bce..cfeebb499e79 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4387,10 +4387,7 @@ long __sched io_schedule_timeout(long timeout) long ret; current->in_iowait = 1; - if (old_iowait) - blk_schedule_flush_plug(current); - else - blk_flush_plug(current); + blk_schedule_flush_plug(current); delayacct_blkio_start(); rq = raw_rq(); From a94ef4ed710e0864c9720ff3f30ceb051aeb8377 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 27 Apr 2015 16:37:39 +0200 Subject: [PATCH 585/652] hwmon: Update the location of my quilt tree This new location was supposed to be temporary, but a couple years have elapsed and it's still there, so apparently it's there to stay. Signed-off-by: Jean Delvare Signed-off-by: Guenter Roeck --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index f8e0afb708b4..60d24f224271 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4536,7 +4536,7 @@ M: Jean Delvare M: Guenter Roeck L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/ +T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git S: Maintained F: Documentation/hwmon/ From 54da691deb123c045259ebf4f5c67381244f58f1 Mon Sep 17 00:00:00 2001 From: Thomas Gummerer Date: Thu, 14 May 2015 09:16:39 +0200 Subject: [PATCH 586/652] drm/i915: fix screen flickering Commit c9f038a1a592 ("drm/i915: Don't assume primary & cursor are always on for wm calculation (v4)") fixes a null pointer dereference. Setting the primary and cursor panes to false in ilk_compute_wm_parameters to false does however give the following errors in the kernel log and causes the screen to flicker. [ 101.133716] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A [ 101.133725] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun Always setting the panes to enabled fixes this error. Helped-by: Matt Roper Signed-off-by: Thomas Gummerer Reviewed-by: Matt Roper Tested-by: Mario Kleiner Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index fa4ccb346389..555b896d2bda 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2045,22 +2045,20 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc, p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal; p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc); - if (crtc->primary->state->fb) { - p->pri.enabled = true; + if (crtc->primary->state->fb) p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8; - } else { - p->pri.enabled = false; - p->pri.bytes_per_pixel = 0; - } + else + p->pri.bytes_per_pixel = 4; + + p->cur.bytes_per_pixel = 4; + /* + * TODO: for now, assume primary and cursor planes are always enabled. + * Setting them to false makes the screen flicker. + */ + p->pri.enabled = true; + p->cur.enabled = true; - if (crtc->cursor->state->fb) { - p->cur.enabled = true; - p->cur.bytes_per_pixel = 4; - } else { - p->cur.enabled = false; - p->cur.bytes_per_pixel = 0; - } p->pri.horiz_pixels = intel_crtc->config->pipe_src_w; p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w; From 13a988396cab68e6c6afd33e461a9e52ce23ff63 Mon Sep 17 00:00:00 2001 From: Koro Chen Date: Wed, 13 May 2015 22:39:03 +0800 Subject: [PATCH 587/652] ALSA: pcm: Modify double acknowledged interrupts check condition Currently in snd_pcm_update_hw_ptr0 during interrupt, we consider there were double acknowledged interrupts when: 1. HW reported pointer is smaller than expected, and 2. Time from last update time (hdelta) is over half a buffer time. However, when HW reported pointer is only a few bytes smaller than expected, and when hdelta is just a little larger than half a buffer time (e.g. ping-pong buffer), it wrongly treats this IRQ as double acknowledged. The condition #2 uses jiffies, but jiffies is not high resolution since it is integer. We should consider jiffies inaccuracy. Signed-off-by: Koro Chen Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index ac6b33f3779c..7d45645f10ba 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -339,7 +339,7 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream, if (delta > new_hw_ptr) { /* check for double acknowledged interrupts */ hdelta = curr_jiffies - runtime->hw_ptr_jiffies; - if (hdelta > runtime->hw_ptr_buffer_jiffies/2) { + if (hdelta > runtime->hw_ptr_buffer_jiffies/2 + 1) { hw_base += runtime->buffer_size; if (hw_base >= runtime->boundary) { hw_base = 0; From 7cded342c09f633666e71ee1ce048f218a9c5836 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 13 May 2015 14:33:22 +0200 Subject: [PATCH 588/652] s390/mm: correct return value of pmd_pfn Git commit 152125b7a882df36a55a8eadbea6d0edf1461ee7 "s390/mm: implement dirty bits for large segment table entries" broke the pmd_pfn function, it changed the return value from 'unsigned long' to 'int'. This breaks all machine configurations with memory above the 8TB line. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index fc642399b489..ef24a212eeb7 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -494,7 +494,7 @@ static inline int pmd_large(pmd_t pmd) return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0; } -static inline int pmd_pfn(pmd_t pmd) +static inline unsigned long pmd_pfn(pmd_t pmd) { unsigned long origin_mask; From fa94b0d72511add5822dc4124f2a3eae66b8863f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 19 May 2015 10:46:49 +0200 Subject: [PATCH 589/652] ALSA: usb-audio: Add quirk for MS LifeCam Studio Microsoft LifeCam Studio (045e:0772) needs a similar quirk for suppressing the wrong sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 7c5a70139278..46facfc9aec1 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1117,6 +1117,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) switch (chip->usb_id) { case USB_ID(0x045E, 0x075D): /* MS Lifecam Cinema */ case USB_ID(0x045E, 0x076D): /* MS Lifecam HD-5000 */ + case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */ case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ return true; } From d10ebb9f136669a1e9fa388fc450bf1822c93dd5 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:13 +0200 Subject: [PATCH 590/652] drm/exynos: fb: use drm_format_num_planes to get buffer count The previous code had some special case handling for the buffer count in exynos_drm_format_num_buffers(). This code was incorrect though, since this special case doesn't exist for DRM. It stemmed from the existence of the special NV12M V4L2 format. NV12 is a bi-planar format (separate planes for luma and chroma) and V4L2 differentiates between a NV12 buffer where luma and chroma is contiguous in memory (so no data between luma/chroma), and a NV12 buffer where luma and chroma have two explicit memory locations (which is then called NV12M). This distinction doesn't exist for DRM. A bi-planar format always explicitly comes with the information about its two planes (even if these planes should be contiguous). Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fb.c | 39 +------------------------- 1 file changed, 1 insertion(+), 38 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 929cb03a8eab..142eb4e3f59e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -171,43 +171,6 @@ exynos_drm_framebuffer_init(struct drm_device *dev, return &exynos_fb->fb; } -static u32 exynos_drm_format_num_buffers(struct drm_mode_fb_cmd2 *mode_cmd) -{ - unsigned int cnt = 0; - - if (mode_cmd->pixel_format != DRM_FORMAT_NV12) - return drm_format_num_planes(mode_cmd->pixel_format); - - while (cnt != MAX_FB_BUFFER) { - if (!mode_cmd->handles[cnt]) - break; - cnt++; - } - - /* - * check if NV12 or NV12M. - * - * NV12 - * handles[0] = base1, offsets[0] = 0 - * handles[1] = base1, offsets[1] = Y_size - * - * NV12M - * handles[0] = base1, offsets[0] = 0 - * handles[1] = base2, offsets[1] = 0 - */ - if (cnt == 2) { - /* - * in case of NV12 format, offsets[1] is not 0 and - * handles[0] is same as handles[1]. - */ - if (mode_cmd->offsets[1] && - mode_cmd->handles[0] == mode_cmd->handles[1]) - cnt = 1; - } - - return cnt; -} - static struct drm_framebuffer * exynos_user_fb_create(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd) @@ -230,7 +193,7 @@ exynos_user_fb_create(struct drm_device *dev, struct drm_file *file_priv, drm_helper_mode_fill_fb_struct(&exynos_fb->fb, mode_cmd); exynos_fb->exynos_gem_obj[0] = to_exynos_gem_obj(obj); - exynos_fb->buf_cnt = exynos_drm_format_num_buffers(mode_cmd); + exynos_fb->buf_cnt = drm_format_num_planes(mode_cmd->pixel_format); DRM_DEBUG_KMS("buf_cnt = %d\n", exynos_fb->buf_cnt); From 5d878bdb51bd7915ba3def8b531238c67624aa58 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:14 +0200 Subject: [PATCH 591/652] drm/exynos: plane: honor buffer offset for dma_addr Previously we were ignoring the buffer offsets that are passed through the addfb2 ioctl. This didn't cause any major issues, since for uni-planar formats (like XRGB8888) userspace would most of the time just use offsets[0]=0. However with NV12 offsets[1] is very likely non-zero. So properly apply the offsets to our dma addresses. Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index 13ea3349363b..b1180fbe7546 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -76,7 +76,7 @@ int exynos_check_plane(struct drm_plane *plane, struct drm_framebuffer *fb) return -EFAULT; } - exynos_plane->dma_addr[i] = buffer->dma_addr; + exynos_plane->dma_addr[i] = buffer->dma_addr + fb->offsets[i]; DRM_DEBUG_KMS("buffer: %d, dma_addr = 0x%lx\n", i, (unsigned long)exynos_plane->dma_addr[i]); From fac8a5b25f5b7954ba510727caadbd9f7839a958 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:15 +0200 Subject: [PATCH 592/652] drm/exynos: mixer: remove buffer count handling in vp_video_buffer() The video processor (VP) supports four formats: NV12, NV21 and its tiled variants. All these formats are bi-planar, so the buffer count in vp_video_buffer() is always 2. Also properly exit if we're called with an invalid (non-VP) pixelformat. Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index fbec750574e6..1e8ce9ee039b 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -382,7 +382,6 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) struct mixer_resources *res = &ctx->mixer_res; unsigned long flags; struct exynos_drm_plane *plane; - unsigned int buf_num = 1; dma_addr_t luma_addr[2], chroma_addr[2]; bool tiled_mode = false; bool crcb_mode = false; @@ -393,27 +392,15 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) switch (plane->pixel_format) { case DRM_FORMAT_NV12: crcb_mode = false; - buf_num = 2; break; - /* TODO: single buffer format NV12, NV21 */ default: - /* ignore pixel format at disable time */ - if (!plane->dma_addr[0]) - break; - DRM_ERROR("pixel format for vp is wrong [%d].\n", plane->pixel_format); return; } - if (buf_num == 2) { - luma_addr[0] = plane->dma_addr[0]; - chroma_addr[0] = plane->dma_addr[1]; - } else { - luma_addr[0] = plane->dma_addr[0]; - chroma_addr[0] = plane->dma_addr[0] - + (plane->pitch * plane->fb_height); - } + luma_addr[0] = plane->dma_addr[0]; + chroma_addr[0] = plane->dma_addr[1]; if (plane->scan_flag & DRM_MODE_FLAG_INTERLACE) { ctx->interlace = true; From 8f2590f8e3a7aeeaf2ff5a875684fc6790ae58b5 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:16 +0200 Subject: [PATCH 593/652] drm/exynos: mixer: also allow NV21 for the video processor All the necessary code is already there, just need to handle the format in the switch statement. Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 1e8ce9ee039b..adb5ec1b51ae 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -393,6 +393,9 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) case DRM_FORMAT_NV12: crcb_mode = false; break; + case DRM_FORMAT_NV21: + crcb_mode = true; + break; default: DRM_ERROR("pixel format for vp is wrong [%d].\n", plane->pixel_format); From 7a57ca7c89ad7e61f8ca45fa1fa892f0d5102808 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:11:59 +0200 Subject: [PATCH 594/652] drm/exynos: mixer: cleanup pixelformat handling Move the defines for the pixelformats that the mixer supports out of mixer_graph_buffer() to the top of the source. Then select the mixer pixelformat (pf) in mixer_graph_buffer() based on the plane's pf (and not bpp). Also add handling of RGB565 and XRGB1555 to the switch statement and exit early if the plane has an unsupported pf. Partially based on 'drm/exynos: enable/disable blend based on pixel format' by Gustavo Padovan . v2: Use the shorter MXR_FORMAT as prefix. v3: Re-add ARGB8888 because of compatibility reasons (suggested by Joonyoung Shim). Reviewed-by: Gustavo Padovan Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 33 +++++++++++++++++++-------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index adb5ec1b51ae..1bcbcfd5f8c3 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -44,6 +44,12 @@ #define MIXER_WIN_NR 3 #define MIXER_DEFAULT_WIN 0 +/* The pixelformats that are natively supported by the mixer. */ +#define MXR_FORMAT_RGB565 4 +#define MXR_FORMAT_ARGB1555 5 +#define MXR_FORMAT_ARGB4444 6 +#define MXR_FORMAT_ARGB8888 7 + struct mixer_resources { int irq; void __iomem *mixer_regs; @@ -521,20 +527,27 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win) plane = &ctx->planes[win]; - #define RGB565 4 - #define ARGB1555 5 - #define ARGB4444 6 - #define ARGB8888 7 + switch (plane->pixel_format) { + case DRM_FORMAT_XRGB4444: + fmt = MXR_FORMAT_ARGB4444; + break; - switch (plane->bpp) { - case 16: - fmt = ARGB4444; + case DRM_FORMAT_XRGB1555: + fmt = MXR_FORMAT_ARGB1555; break; - case 32: - fmt = ARGB8888; + + case DRM_FORMAT_RGB565: + fmt = MXR_FORMAT_RGB565; break; + + case DRM_FORMAT_XRGB8888: + case DRM_FORMAT_ARGB8888: + fmt = MXR_FORMAT_ARGB8888; + break; + default: - fmt = ARGB8888; + DRM_DEBUG_KMS("pixelformat unsupported by mixer\n"); + return; } /* check if mixer supports requested scaling setup */ From d6b163026c5a6f2e49bc59261b69d44465ebddb4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 2 May 2015 00:56:36 +0900 Subject: [PATCH 595/652] drm/exynos: mixer: Constify platform_device_id The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 1bcbcfd5f8c3..1a07fdd3e39d 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1159,7 +1159,7 @@ static struct mixer_drv_data exynos4210_mxr_drv_data = { .has_sclk = 1, }; -static struct platform_device_id mixer_driver_types[] = { +static const struct platform_device_id mixer_driver_types[] = { { .name = "s5p-mixer", .driver_data = (unsigned long)&exynos4210_mxr_drv_data, From 48107d7b0db180155b19b2cf083517014289a079 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 7 May 2015 09:04:44 +0900 Subject: [PATCH 596/652] drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMD Disabling the CONFIG_DRM_EXYNOS_FIMD (e.g. by enabling of CONFIG_FB_S3C) leads to build error: drivers/built-in.o: In function `exynos_dp_dpms': binder.c:(.text+0xd6a840): undefined reference to `fimd_dp_clock_enable' binder.c:(.text+0xd6ab54): undefined reference to `fimd_dp_clock_enable' Fix this by changing direct call to fimd_dp_clock_enable() into optional call to exynos_drm_crtc_ops->clock_enable(). Only the DRM_EXYNOS_FIMD implements this op. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_dp_core.c | 11 +++++-- drivers/gpu/drm/exynos/exynos_drm_drv.h | 5 ++++ drivers/gpu/drm/exynos/exynos_drm_fimd.c | 37 ++++++++++++------------ drivers/gpu/drm/exynos/exynos_drm_fimd.h | 15 ---------- 4 files changed, 31 insertions(+), 37 deletions(-) delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_fimd.h diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c index 1dbfba58f909..441ef06b8894 100644 --- a/drivers/gpu/drm/exynos/exynos_dp_core.c +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c @@ -32,7 +32,6 @@ #include #include "exynos_dp_core.h" -#include "exynos_drm_fimd.h" #define ctx_from_connector(c) container_of(c, struct exynos_dp_device, \ connector) @@ -1066,6 +1065,8 @@ static void exynos_dp_phy_exit(struct exynos_dp_device *dp) static void exynos_dp_poweron(struct exynos_dp_device *dp) { + struct exynos_drm_crtc *crtc = dp_to_crtc(dp); + if (dp->dpms_mode == DRM_MODE_DPMS_ON) return; @@ -1076,7 +1077,8 @@ static void exynos_dp_poweron(struct exynos_dp_device *dp) } } - fimd_dp_clock_enable(dp_to_crtc(dp), true); + if (crtc->ops->clock_enable) + crtc->ops->clock_enable(dp_to_crtc(dp), true); clk_prepare_enable(dp->clock); exynos_dp_phy_init(dp); @@ -1087,6 +1089,8 @@ static void exynos_dp_poweron(struct exynos_dp_device *dp) static void exynos_dp_poweroff(struct exynos_dp_device *dp) { + struct exynos_drm_crtc *crtc = dp_to_crtc(dp); + if (dp->dpms_mode != DRM_MODE_DPMS_ON) return; @@ -1102,7 +1106,8 @@ static void exynos_dp_poweroff(struct exynos_dp_device *dp) exynos_dp_phy_exit(dp); clk_disable_unprepare(dp->clock); - fimd_dp_clock_enable(dp_to_crtc(dp), false); + if (crtc->ops->clock_enable) + crtc->ops->clock_enable(dp_to_crtc(dp), false); if (dp->panel) { if (drm_panel_unprepare(dp->panel)) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index e12ecb5d5d9a..44f128a03aea 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -181,6 +181,10 @@ struct exynos_drm_display { * @win_disable: disable hardware specific overlay. * @te_handler: trigger to transfer video image at the tearing effect * synchronization signal if there is a page flip request. + * @clock_enable: optional function enabling/disabling display domain clock, + * called from exynos-dp driver before powering up (with + * 'enable' argument as true) and after powering down (with + * 'enable' as false). */ struct exynos_drm_crtc; struct exynos_drm_crtc_ops { @@ -195,6 +199,7 @@ struct exynos_drm_crtc_ops { void (*win_commit)(struct exynos_drm_crtc *crtc, unsigned int zpos); void (*win_disable)(struct exynos_drm_crtc *crtc, unsigned int zpos); void (*te_handler)(struct exynos_drm_crtc *crtc); + void (*clock_enable)(struct exynos_drm_crtc *crtc, bool enable); }; /* diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 9819fa6a9e2a..2fb95ccb5841 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -33,7 +33,6 @@ #include "exynos_drm_crtc.h" #include "exynos_drm_plane.h" #include "exynos_drm_iommu.h" -#include "exynos_drm_fimd.h" /* * FIMD stands for Fully Interactive Mobile Display and @@ -946,6 +945,23 @@ static void fimd_te_handler(struct exynos_drm_crtc *crtc) drm_handle_vblank(ctx->drm_dev, ctx->pipe); } +static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable) +{ + struct fimd_context *ctx = crtc->ctx; + u32 val; + + /* + * Only Exynos 5250, 5260, 5410 and 542x requires enabling DP/MIE + * clock. On these SoCs the bootloader may enable it but any + * power domain off/on will reset it to disable state. + */ + if (ctx->driver_data != &exynos5_fimd_driver_data) + return; + + val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE; + writel(DP_MIE_CLK_DP_ENABLE, ctx->regs + DP_MIE_CLKCON); +} + static struct exynos_drm_crtc_ops fimd_crtc_ops = { .dpms = fimd_dpms, .mode_fixup = fimd_mode_fixup, @@ -956,6 +972,7 @@ static struct exynos_drm_crtc_ops fimd_crtc_ops = { .win_commit = fimd_win_commit, .win_disable = fimd_win_disable, .te_handler = fimd_te_handler, + .clock_enable = fimd_dp_clock_enable, }; static irqreturn_t fimd_irq_handler(int irq, void *dev_id) @@ -1192,24 +1209,6 @@ static int fimd_remove(struct platform_device *pdev) return 0; } -void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable) -{ - struct fimd_context *ctx = crtc->ctx; - u32 val; - - /* - * Only Exynos 5250, 5260, 5410 and 542x requires enabling DP/MIE - * clock. On these SoCs the bootloader may enable it but any - * power domain off/on will reset it to disable state. - */ - if (ctx->driver_data != &exynos5_fimd_driver_data) - return; - - val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE; - writel(DP_MIE_CLK_DP_ENABLE, ctx->regs + DP_MIE_CLKCON); -} -EXPORT_SYMBOL_GPL(fimd_dp_clock_enable); - struct platform_driver fimd_driver = { .probe = fimd_probe, .remove = fimd_remove, diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.h b/drivers/gpu/drm/exynos/exynos_drm_fimd.h deleted file mode 100644 index b4fcaa568456..000000000000 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (c) 2015 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _EXYNOS_DRM_FIMD_H_ -#define _EXYNOS_DRM_FIMD_H_ - -extern void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable); - -#endif /* _EXYNOS_DRM_FIMD_H_ */ From f3aaf7624463721af27f13cc083916c54ffbee70 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 7 May 2015 09:04:45 +0900 Subject: [PATCH 597/652] drm/exynos: Constify exynos_drm_crtc_ops The Exynos DRM code does not modify the ops provided by CRTC driver in exynos_drm_crtc_create() call. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_crtc.h | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 +- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 +- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 7 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index 1f7e33f59de6..3d00df76220d 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -710,7 +710,7 @@ static void decon_dpms(struct exynos_drm_crtc *crtc, int mode) } } -static struct exynos_drm_crtc_ops decon_crtc_ops = { +static const struct exynos_drm_crtc_ops decon_crtc_ops = { .dpms = decon_dpms, .mode_fixup = decon_mode_fixup, .commit = decon_commit, diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index eb49195cec5c..9006b947e03c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -238,11 +238,11 @@ static struct drm_crtc_funcs exynos_crtc_funcs = { }; struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev, - struct drm_plane *plane, - int pipe, - enum exynos_drm_output_type type, - struct exynos_drm_crtc_ops *ops, - void *ctx) + struct drm_plane *plane, + int pipe, + enum exynos_drm_output_type type, + const struct exynos_drm_crtc_ops *ops, + void *ctx) { struct exynos_drm_crtc *exynos_crtc; struct exynos_drm_private *private = drm_dev->dev_private; diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.h b/drivers/gpu/drm/exynos/exynos_drm_crtc.h index 0ecd8fc45cff..0f3aa70818e3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.h +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.h @@ -18,11 +18,11 @@ #include "exynos_drm_drv.h" struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev, - struct drm_plane *plane, - int pipe, - enum exynos_drm_output_type type, - struct exynos_drm_crtc_ops *ops, - void *context); + struct drm_plane *plane, + int pipe, + enum exynos_drm_output_type type, + const struct exynos_drm_crtc_ops *ops, + void *context); int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int pipe); void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int pipe); void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int pipe); diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 44f128a03aea..0e951226ca06 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -226,7 +226,7 @@ struct exynos_drm_crtc { unsigned int dpms; wait_queue_head_t pending_flip_queue; struct drm_pending_vblank_event *event; - struct exynos_drm_crtc_ops *ops; + const struct exynos_drm_crtc_ops *ops; void *ctx; }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 2fb95ccb5841..5c1a148525f8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -962,7 +962,7 @@ static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable) writel(DP_MIE_CLK_DP_ENABLE, ctx->regs + DP_MIE_CLKCON); } -static struct exynos_drm_crtc_ops fimd_crtc_ops = { +static const struct exynos_drm_crtc_ops fimd_crtc_ops = { .dpms = fimd_dpms, .mode_fixup = fimd_mode_fixup, .commit = fimd_commit, diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 27e84ec21694..1b3479a8db5f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -217,7 +217,7 @@ static int vidi_ctx_initialize(struct vidi_context *ctx, return 0; } -static struct exynos_drm_crtc_ops vidi_crtc_ops = { +static const struct exynos_drm_crtc_ops vidi_crtc_ops = { .dpms = vidi_dpms, .enable_vblank = vidi_enable_vblank, .disable_vblank = vidi_disable_vblank, diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 1a07fdd3e39d..31c1793bc97b 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1129,7 +1129,7 @@ int mixer_check_mode(struct drm_display_mode *mode) return -EINVAL; } -static struct exynos_drm_crtc_ops mixer_crtc_ops = { +static const struct exynos_drm_crtc_ops mixer_crtc_ops = { .dpms = mixer_dpms, .enable_vblank = mixer_enable_vblank, .disable_vblank = mixer_disable_vblank, From 362edccc7a1395bcd05d1f2b30f47a3439ffef5c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 7 May 2015 09:04:46 +0900 Subject: [PATCH 598/652] drm/exynos: Consolidate return statements in fimd_bind() Simplify the code and remove superfluous return statement. Just return the result of fimd_iommu_attach_devices(). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 5c1a148525f8..d704f2ba7179 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -1042,12 +1042,7 @@ static int fimd_bind(struct device *dev, struct device *master, void *data) if (ctx->display) exynos_drm_create_enc_conn(drm_dev, ctx->display); - ret = fimd_iommu_attach_devices(ctx, drm_dev); - if (ret) - return ret; - - return 0; - + return fimd_iommu_attach_devices(ctx, drm_dev); } static void fimd_unbind(struct device *dev, struct device *master, From c0734fbaf49512dc62d544875bd9a4192329ce01 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 6 May 2015 14:10:21 +0200 Subject: [PATCH 599/652] drm/exynos: mixer: don't dump registers under spinlock mixer_regs_dump() was called in mixer_run(), which was called under the register spinlock in mixer_graph_buffer() and vp_video_buffer(). This would trigger a sysmmu pagefault with drm.debug=0xff because of the large delay caused by the register dumping. To keep consistency also move register dumping out of mixer_stop(), which is the counterpart to mixer_run(). Kernel dump: [ 131.296529] [drm:mixer_win_commit] win: 2 [ 131.300693] [drm:mixer_regs_dump] MXR_STATUS = 00000081 [ 131.305888] [drm:mixer_regs_dump] MXR_CFG = 000007d5 [ 131.310835] [drm:mixer_regs_dump] MXR_INT_EN = 00000000 [ 131.316043] [drm:mixer_regs_dump] MXR_INT_STATUS = 00000900 [ 131.321598] [drm:mixer_regs_dump] MXR_LAYER_CFG = 00000321 [ 131.327066] [drm:mixer_regs_dump] MXR_VIDEO_CFG = 00000000 [ 131.332535] [drm:mixer_regs_dump] MXR_GRAPHIC0_CFG = 00310700 [ 131.338263] [drm:mixer_regs_dump] MXR_GRAPHIC0_BASE = 20c00000 [ 131.344079] [drm:mixer_regs_dump] MXR_GRAPHIC0_SPAN = 00000780 [ 131.349895] [drm:mixer_regs_dump] MXR_GRAPHIC0_WH = 07800438 [ 131.355537] [drm:mixer_regs_dump] MXR_GRAPHIC0_SXY = 00000000 [ 131.361265] [drm:mixer_regs_dump] MXR_GRAPHIC0_DXY = 00000000 [ 131.366994] [drm:mixer_regs_dump] MXR_GRAPHIC1_CFG = 00000000 [ 131.372723] [drm:mixer_regs_dump] MXR_GRAPHIC1_BASE = 00000000 [ 131.378539] [drm:mixer_regs_dump] MXR_GRAPHIC1_SPAN = 00000000 [ 131.384354] [drm:mixer_regs_dump] MXR_GRAPHIC1_WH = 00000000 [ 131.389996] [drm:mixer_regs_dump] MXR_GRAPHIC1_SXY = 00000000 [ 131.395725] [drm:mixer_regs_dump] MXR_GRAPHIC1_DXY = 00000000 [ 131.401486] PAGE FAULT occurred at 0x0 by 12e20000.sysmmu(Page table base: 0x6d990000) [ 131.409353] Lv1 entry: 0x6e0f2401 [ 131.412753] ------------[ cut here ]------------ [ 131.417339] kernel BUG at drivers/iommu/exynos-iommu.c:358! [ 131.422894] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 131.428709] Modules linked in: ecb bridge stp llc bnep btrfs xor xor_neon zlib_inflate zlib_deflate raid6_pq btusb bluetooth usb_storage s5p_jpeg videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_core [ 131.447461] CPU: 0 PID: 2418 Comm: lt-modetest Tainted: G W 4.0.1-debug+ #3 [ 131.455530] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 131.461607] task: ee194100 ti: ec4fe000 task.ti: ec4fe000 [ 131.466995] PC is at exynos_sysmmu_irq+0x2a0/0x2a8 [ 131.471766] LR is at vprintk_emit+0x268/0x594 [ 131.476103] pc : [] lr : [] psr: a00001d3 [ 131.476103] sp : ec4ff9d8 ip : 00000000 fp : ec4ffa14 [ 131.487559] r10: ffffffda r9 : ee206e28 r8 : ee2d1a10 [ 131.492767] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ee206e10 [ 131.499277] r3 : c06fca20 r2 : 00000000 r1 : 00000000 r0 : ee28be00 [ 131.505788] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment user [ 131.513079] Control: 10c5387d Table: 6c72404a DAC: 00000015 [ 131.518808] Process lt-modetest (pid: 2418, stack limit = 0xec4fe218) [ 131.525231] Stack: (0xec4ff9d8 to 0xec500000) [ 131.529571] f9c0: ec4ff9e4 c03a0c40 [ 131.537732] f9e0: bbfa6e35 6d990000 6d161c3d ee20a900 ee04a7e0 00000028 ee007000 00000000 [ 131.545891] fa00: 00000000 c06fb1fc ec4ffa5c ec4ffa18 c0066a34 c0277f10 ee257664 0000000b [ 131.554050] fa20: ec4ffa5c c06fafbb ee04a780 c06fb1e8 00000000 ee04a780 ee04a7e0 ee20a900 [ 131.562209] fa40: ee007000 00000015 ec4ffb48 ee008000 ec4ffa7c ec4ffa60 c0066c90 c00669e0 [ 131.570369] fa60: 00020000 ee04a780 ee04a7e0 00001000 ec4ffa94 ec4ffa80 c0069c6c c0066c58 [ 131.578528] fa80: 00000028 ee004450 ec4ffaac ec4ffa98 c0066028 c0069bac 000000a0 c06e19b4 [ 131.586687] faa0: ec4ffad4 ec4ffab0 c0223678 c0066000 c02235dc 00000015 00000000 00000015 [ 131.594846] fac0: ec4ffc80 00000001 ec4ffaec ec4ffad8 c0066028 c02235e8 00000089 c06bfc54 [ 131.603005] fae0: ec4ffb1c ec4ffaf0 c006633c c0066000 ec4ffb48 f002000c 00000025 00000015 [ 131.611165] fb00: c06c680c ec4ffb48 f0020000 ee008000 ec4ffb44 ec4ffb20 c000867c c00662c4 [ 131.619324] fb20: c02046ac 60000153 ffffffff ec4ffb7c 00000000 00000101 ec4ffbb4 ec4ffb48 [ 131.627483] fb40: c0013240 c0008650 00000001 ee257508 00000002 00000001 ee257504 ee257508 [ 131.635642] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90 [ 131.643802] fb80: c002e124 c02046ac 60000153 ffffffff c002e09c 00000000 c06c6080 00000283 [ 131.651960] fba0: 00000001 c06fb1ac ec4ffc0c ec4ffbb8 c002d690 c002e0a8 ee78d080 ee008000 [ 131.660120] fbc0: 00400000 c04eb3b0 ffff7c44 c06c6100 c06fdac0 0000000a c06bf2f0 c06c6080 [ 131.668279] fbe0: c06bfc54 c06bfc54 00000000 00000025 00000000 00000001 ec4ffc80 ee008000 [ 131.676438] fc00: ec4ffc24 ec4ffc10 c002dbb8 c002d564 00000089 c06bfc54 ec4ffc54 ec4ffc28 [ 131.684597] fc20: c0066340 c002dafc ec4ffc80 f002000c 0000001c 0000000c c06c680c ec4ffc80 [ 131.692757] fc40: f0020000 00000080 ec4ffc7c ec4ffc58 c000867c c00662c4 c04e6624 60000053 [ 131.700916] fc60: ffffffff ec4ffcb4 c072df54 ee22d010 ec4ffcdc ec4ffc80 c0013240 c0008650 [ 131.709075] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420 [ 131.717234] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624 [ 131.725393] fcc0: 60000053 ffffffff ec4fe000 c072df54 ec4ffd34 ec4ffce0 c02b64d0 c04e6618 [ 131.733552] fce0: ec4ffcf8 00000000 00000000 60000053 00010000 00010000 00000000 200cb000 [ 131.741712] fd00: 20080000 ee22d664 00000001 ee256000 ee261400 ee22d420 00000080 00000080 [ 131.749871] fd20: ee256000 00000280 ec4ffd74 ec4ffd38 c02a8844 c02b5fec 00000080 00000280 [ 131.758030] fd40: 000001e0 00000000 00000000 00000280 000001e0 ee22d220 01e00000 00000002 [ 131.766189] fd60: ee22d420 ee261400 ec4ffdbc ec4ffd78 c0293cbc c02a87a4 00000080 00000280 [ 131.774348] fd80: 000001e0 00000000 00000000 02800000 01e00000 ee261400 ee22d460 ee261400 [ 131.782508] fda0: ee22d420 00000000 01e00000 000001e0 ec4ffe24 ec4ffdc0 c0297800 c0293b24 [ 131.790667] fdc0: 00000080 00000280 000001e0 00000000 00000000 02800000 01e00000 ec4ffdf8 [ 131.798826] fde0: c028db00 00000080 00000080 ee256000 02800000 00000000 ec4ffe24 c06c6448 [ 131.806985] fe00: c072df54 000000b7 ee013800 ec4ffe54 edbf7300 ec4ffe54 ec4fff04 ec4ffe28 [ 131.815145] fe20: c028a848 c029768c 00000001 c06195d8 ec4ffe5c ec4ffe40 c0297680 c0521f6c [ 131.823304] fe40: 00000030 bed45d38 00000030 c03064b7 ec4ffe8c 00000011 00000015 00000022 [ 131.831463] fe60: 00000000 00000080 00000080 00000280 000001e0 00000000 00000000 01e00000 [ 131.839622] fe80: 02800000 00000000 00000000 0004b000 00000000 00000000 c00121e4 c0011080 [ 131.847781] fea0: c00110a4 00000000 00000000 00000000 ec4ffeec ec4ffec0 c00110f0 c00121cc [ 131.855940] fec0: 00000000 c00e7fec ec4ffeec ec4ffed8 c004af2c dc8ba201 edae4fc0 edbf7000 [ 131.864100] fee0: edbf7000 00000003 bed45d38 00000003 bed45d38 ee3f2040 ec4fff7c ec4fff08 [ 131.872259] ff00: c010b62c c028a684 edae4fc0 00000000 00000000 b6666000 ec40d108 edae4fc4 [ 131.880418] ff20: ec4fff6c ec4fff30 c00e7fec c02207b0 000001f9 00000000 edae5008 ec40d110 [ 131.888577] ff40: 00070800 edae5008 edae4fc0 00070800 b6666000 edbf7000 edbf7000 c03064b7 [ 131.896736] ff60: bed45d38 00000003 ec4fe000 00000000 ec4fffa4 ec4fff80 c010b84c c010b208 [ 131.904896] ff80: 00000022 00000000 bed45d38 c03064b7 00000036 c000ede4 00000000 ec4fffa8 [ 131.913055] ffa0: c000ec40 c010b81c 00000000 bed45d38 00000003 c03064b7 bed45d38 00000022 [ 131.921214] ffc0: 00000000 bed45d38 c03064b7 00000036 00000080 00000080 00000000 000001e0 [ 131.929373] ffe0: b6da4064 bed45d1c b6d98968 b6e8082c 60000050 00000003 00000000 00000000 [ 131.937529] Backtrace: [ 131.939967] [] (exynos_sysmmu_irq) from [] (handle_irq_event_percpu+0x60/0x278) [ 131.948988] r10:c06fb1fc r9:00000000 r8:00000000 r7:ee007000 r6:00000028 r5:ee04a7e0 [ 131.956799] r4:ee20a900 [ 131.959320] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x44/0x64) [ 131.968170] r10:ee008000 r9:ec4ffb48 r8:00000015 r7:ee007000 r6:ee20a900 r5:ee04a7e0 [ 131.975982] r4:ee04a780 [ 131.978504] [] (handle_irq_event) from [] (handle_level_irq+0xcc/0x144) [ 131.986832] r6:00001000 r5:ee04a7e0 r4:ee04a780 r3:00020000 [ 131.992478] [] (handle_level_irq) from [] (generic_handle_irq+0x34/0x44) [ 132.000894] r5:ee004450 r4:00000028 [ 132.004459] [] (generic_handle_irq) from [] (combiner_handle_cascade_irq+0x9c/0x108) [ 132.013914] r4:c06e19b4 r3:000000a0 [ 132.017476] [] (combiner_handle_cascade_irq) from [] (generic_handle_irq+0x34/0x44) [ 132.026847] r8:00000001 r7:ec4ffc80 r6:00000015 r5:00000000 r4:00000015 r3:c02235dc [ 132.034576] [] (generic_handle_irq) from [] (__handle_domain_irq+0x84/0xf0) [ 132.043252] r4:c06bfc54 r3:00000089 [ 132.046815] [] (__handle_domain_irq) from [] (gic_handle_irq+0x38/0x70) [ 132.055144] r10:ee008000 r9:f0020000 r8:ec4ffb48 r7:c06c680c r6:00000015 r5:00000025 [ 132.062956] r4:f002000c r3:ec4ffb48 [ 132.066520] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.073980] Exception stack(0xec4ffb48 to 0xec4ffb90) [ 132.079016] fb40: 00000001 ee257508 00000002 00000001 ee257504 ee257508 [ 132.087176] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90 [ 132.095333] fb80: c002e124 c02046ac 60000153 ffffffff [ 132.100367] r9:00000101 r8:00000000 r7:ec4ffb7c r6:ffffffff r5:60000153 r4:c02046ac [ 132.108098] [] (tasklet_hi_action) from [] (__do_softirq+0x138/0x38c) [ 132.116251] r8:c06fb1ac r7:00000001 r6:00000283 r5:c06c6080 r4:00000000 r3:c002e09c [ 132.123980] [] (__do_softirq) from [] (irq_exit+0xc8/0x104) [ 132.131268] r10:ee008000 r9:ec4ffc80 r8:00000001 r7:00000000 r6:00000025 r5:00000000 [ 132.139080] r4:c06bfc54 [ 132.141600] [] (irq_exit) from [] (__handle_domain_irq+0x88/0xf0) [ 132.149409] r4:c06bfc54 r3:00000089 [ 132.152971] [] (__handle_domain_irq) from [] (gic_handle_irq+0x38/0x70) [ 132.161300] r10:00000080 r9:f0020000 r8:ec4ffc80 r7:c06c680c r6:0000000c r5:0000001c [ 132.169112] r4:f002000c r3:ec4ffc80 [ 132.172675] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.180137] Exception stack(0xec4ffc80 to 0xec4ffcc8) [ 132.185173] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420 [ 132.193332] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624 [ 132.201489] fcc0: 60000053 ffffffff [ 132.204961] r9:ee22d010 r8:c072df54 r7:ec4ffcb4 r6:ffffffff r5:60000053 r4:c04e6624 [ 132.212694] [] (_raw_spin_unlock_irqrestore) from [] (mixer_win_commit+0x4f0/0xcc8) [ 132.222060] r4:c072df54 r3:ec4fe000 [ 132.225625] [] (mixer_win_commit) from [] (exynos_update_plane+0xac/0xb8) [ 132.234126] r10:00000280 r9:ee256000 r8:00000080 r7:00000080 r6:ee22d420 r5:ee261400 [ 132.241937] r4:ee256000 [ 132.244461] [] (exynos_update_plane) from [] (__setplane_internal+0x1a4/0x2c0) [ 132.253395] r7:ee261400 r6:ee22d420 r5:00000002 r4:01e00000 [ 132.259041] [] (__setplane_internal) from [] (drm_mode_setplane+0x180/0x244) [ 132.267804] r9:000001e0 r8:01e00000 r7:00000000 r6:ee22d420 r5:ee261400 r4:ee22d460 [ 132.275535] [] (drm_mode_setplane) from [] (drm_ioctl+0x1d0/0x58c) [ 132.283428] r10:ec4ffe54 r9:edbf7300 r8:ec4ffe54 r7:ee013800 r6:000000b7 r5:c072df54 [ 132.291240] r4:c06c6448 [ 132.293763] [] (drm_ioctl) from [] (do_vfs_ioctl+0x430/0x614) [ 132.301222] r10:ee3f2040 r9:bed45d38 r8:00000003 r7:bed45d38 r6:00000003 r5:edbf7000 [ 132.309034] r4:edbf7000 [ 132.311555] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x3c/0x64) [ 132.318842] r10:00000000 r9:ec4fe000 r8:00000003 r7:bed45d38 r6:c03064b7 r5:edbf7000 [ 132.326654] r4:edbf7000 [ 132.329176] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x34) [ 132.336723] r8:c000ede4 r7:00000036 r6:c03064b7 r5:bed45d38 r4:00000000 r3:00000022 [ 132.344451] Code: e3130002 0affffaf eb09a67d eaffffad (e7f001f2) [ 132.350528] ---[ end trace d428689b94df895c ]--- [ 132.355126] Kernel panic - not syncing: Fatal exception in interrupt [ 132.361465] CPU2: stopping [ 132.364155] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D W 4.0.1-debug+ #3 [ 132.371791] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.377866] Backtrace: [ 132.380304] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 132.387849] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.393497] [] (show_stack) from [] (dump_stack+0x88/0xc8) [ 132.400698] [] (dump_stack) from [] (handle_IPI+0x1c8/0x2c4) [ 132.408073] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b0000 [ 132.413718] [] (handle_IPI) from [] (gic_handle_irq+0x6c/0x70) [ 132.421267] r9:f0028000 r8:ee0b1f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002800c [ 132.428995] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.436457] Exception stack(0xee0b1f48 to 0xee0b1f90) [ 132.441493] 1f40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.449653] 1f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b1f9c ee0b1fa0 ee0b1f90 [ 132.457811] 1f80: c000f82c c000f830 600f0053 ffffffff [ 132.462844] r9:00000001 r8:c06c0dc0 r7:ee0b1f7c r6:ffffffff r5:600f0053 r4:c000f830 [ 132.470575] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x318/0x4ec) [ 132.478818] [] (cpu_startup_entry) from [] (secondary_start_kernel+0xf4/0x100) [ 132.487755] r7:c06fd440 [ 132.490279] [] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.497651] r4:6e09006a r3:c000872c [ 132.501210] CPU3: stopping [ 132.503904] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D W 4.0.1-debug+ #3 [ 132.511539] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.517614] Backtrace: [ 132.520051] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 132.527597] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.533243] [] (show_stack) from [] (dump_stack+0x88/0xc8) [ 132.540446] [] (dump_stack) from [] (handle_IPI+0x1c8/0x2c4) [ 132.547820] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b2000 [ 132.553466] [] (handle_IPI) from [] (gic_handle_irq+0x6c/0x70) [ 132.561014] r9:f002c000 r8:ee0b3f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002c00c [ 132.568743] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.576205] Exception stack(0xee0b3f48 to 0xee0b3f90) [ 132.581241] 3f40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.589401] 3f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b3f9c ee0b3fa0 ee0b3f90 [ 132.597558] 3f80: c000f82c c000f830 600f0053 ffffffff [ 132.602591] r9:00000001 r8:c06c0dc0 r7:ee0b3f7c r6:ffffffff r5:600f0053 r4:c000f830 [ 132.610321] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x318/0x4ec) [ 132.618566] [] (cpu_startup_entry) from [] (secondary_start_kernel+0xf4/0x100) [ 132.627503] r7:c06fd440 [ 132.630023] [] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.637399] r4:6e09006a r3:c000872c [ 132.640958] CPU1: stopping [ 132.643651] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.0.1-debug+ #3 [ 132.651287] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.657362] Backtrace: [ 132.659799] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 132.667344] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.672991] [] (show_stack) from [] (dump_stack+0x88/0xc8) [ 132.680194] [] (dump_stack) from [] (handle_IPI+0x1c8/0x2c4) [ 132.687569] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0ae000 [ 132.693214] [] (handle_IPI) from [] (gic_handle_irq+0x6c/0x70) [ 132.700762] r9:f0024000 r8:ee0aff48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002400c [ 132.708491] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.715953] Exception stack(0xee0aff48 to 0xee0aff90) [ 132.720989] ff40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.729149] ff60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0aff9c ee0affa0 ee0aff90 [ 132.737306] ff80: c000f82c c000f830 60070053 ffffffff [ 132.742339] r9:00000001 r8:c06c0dc0 r7:ee0aff7c r6:ffffffff r5:60070053 r4:c000f830 [ 132.750069] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x318/0x4ec) [ 132.758314] [] (cpu_startup_entry) from [] (secondary_start_kernel+0xf4/0x100) [ 132.767251] r7:c06fd440 [ 132.769772] [] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.777146] r4:6e09006a r3:c000872c [ 132.780709] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Tobias Jakobi Reviewed-by: Gustavo Padovan Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 31c1793bc97b..285e1569e6ad 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -365,8 +365,6 @@ static void mixer_run(struct mixer_context *ctx) struct mixer_resources *res = &ctx->mixer_res; mixer_reg_writemask(res, MXR_STATUS, ~0, MXR_STATUS_REG_RUN); - - mixer_regs_dump(ctx); } static void mixer_stop(struct mixer_context *ctx) @@ -379,8 +377,6 @@ static void mixer_stop(struct mixer_context *ctx) while (!(mixer_reg_read(res, MXR_STATUS) & MXR_STATUS_REG_IDLE) && --timeout) usleep_range(10000, 12000); - - mixer_regs_dump(ctx); } static void vp_video_buffer(struct mixer_context *ctx, int win) @@ -480,6 +476,7 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) mixer_vsync_set_update(ctx, true); spin_unlock_irqrestore(&res->reg_slock, flags); + mixer_regs_dump(ctx); vp_regs_dump(ctx); } @@ -620,6 +617,8 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win) mixer_vsync_set_update(ctx, true); spin_unlock_irqrestore(&res->reg_slock, flags); + + mixer_regs_dump(ctx); } static void vp_win_reset(struct mixer_context *ctx) @@ -1073,6 +1072,7 @@ static void mixer_poweroff(struct mixer_context *ctx) mutex_unlock(&ctx->mixer_mutex); mixer_stop(ctx); + mixer_regs_dump(ctx); mixer_window_suspend(ctx); ctx->int_en = mixer_reg_read(res, MXR_INT_EN); From 5b1d5bc690a9666b375496f5d680278f19687bc4 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 6 May 2015 14:10:22 +0200 Subject: [PATCH 600/652] drm/exynos: 'win' is always unsigned The index for the hardware layer is always >=0. Previous code that also used -1 as special index is now gone. Also apply this to 'ch_enabled' (decon/fimd), since the variable is on the same line (and is again always unsigned). Signed-off-by: Tobias Jakobi Reviewed-by: Gustavo Padovan Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 7 ++++--- drivers/gpu/drm/exynos/exynos_mixer.c | 7 ++++--- 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index 3d00df76220d..6714e5b193ea 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -91,7 +91,7 @@ static void decon_wait_for_vblank(struct exynos_drm_crtc *crtc) static void decon_clear_channel(struct decon_context *ctx) { - int win, ch_enabled = 0; + unsigned int win, ch_enabled = 0; DRM_DEBUG_KMS("%s\n", __FILE__); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index d704f2ba7179..a0edab833148 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -215,7 +215,7 @@ static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc) DRM_DEBUG_KMS("vblank wait timed out.\n"); } -static void fimd_enable_video_output(struct fimd_context *ctx, int win, +static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win, bool enable) { u32 val = readl(ctx->regs + WINCON(win)); @@ -228,7 +228,8 @@ static void fimd_enable_video_output(struct fimd_context *ctx, int win, writel(val, ctx->regs + WINCON(win)); } -static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, int win, +static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, + unsigned int win, bool enable) { u32 val = readl(ctx->regs + SHADOWCON); @@ -243,7 +244,7 @@ static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, int win, static void fimd_clear_channel(struct fimd_context *ctx) { - int win, ch_enabled = 0; + unsigned int win, ch_enabled = 0; DRM_DEBUG_KMS("%s\n", __FILE__); diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 285e1569e6ad..8874c1fcb3ab 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -333,7 +333,8 @@ static void mixer_cfg_rgb_fmt(struct mixer_context *ctx, unsigned int height) mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_RGB_FMT_MASK); } -static void mixer_cfg_layer(struct mixer_context *ctx, int win, bool enable) +static void mixer_cfg_layer(struct mixer_context *ctx, unsigned int win, + bool enable) { struct mixer_resources *res = &ctx->mixer_res; u32 val = enable ? ~0 : 0; @@ -379,7 +380,7 @@ static void mixer_stop(struct mixer_context *ctx) usleep_range(10000, 12000); } -static void vp_video_buffer(struct mixer_context *ctx, int win) +static void vp_video_buffer(struct mixer_context *ctx, unsigned int win) { struct mixer_resources *res = &ctx->mixer_res; unsigned long flags; @@ -511,7 +512,7 @@ fail: return -ENOTSUPP; } -static void mixer_graph_buffer(struct mixer_context *ctx, int win) +static void mixer_graph_buffer(struct mixer_context *ctx, unsigned int win) { struct mixer_resources *res = &ctx->mixer_res; unsigned long flags; From be083a002f421bea1fccc2c8a14ffb2c640fe792 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Sat, 25 Apr 2015 20:06:54 +0200 Subject: [PATCH 601/652] drm/exynos: cleanup exynos_drm_plane Remove the unused fields of struct exynos_drm_plane. v2: Remove index_color as well, also unused (thanks Joonyoung). Signed-off-by: Tobias Jakobi Reviewed-by: Gustavo Padovan Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_drv.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 0e951226ca06..29e3fb78c615 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -71,13 +71,6 @@ enum exynos_drm_output_type { * @dma_addr: array of bus(accessed by dma) address to the memory region * allocated for a overlay. * @zpos: order of overlay layer(z position). - * @index_color: if using color key feature then this value would be used - * as index color. - * @default_win: a window to be enabled. - * @color_key: color key on or off. - * @local_path: in case of lcd type, local path mode on or off. - * @transparency: transparency on or off. - * @activated: activated or not. * @enabled: enabled or not. * @resume: to resume or not. * @@ -108,13 +101,7 @@ struct exynos_drm_plane { uint32_t pixel_format; dma_addr_t dma_addr[MAX_FB_BUFFER]; unsigned int zpos; - unsigned int index_color; - bool default_win:1; - bool color_key:1; - bool local_path:1; - bool transparency:1; - bool activated:1; bool enabled:1; bool resume:1; }; From b0f155ada4c819f06aa32b4c906e7e76350c7ec1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 14 May 2015 09:03:06 +0900 Subject: [PATCH 602/652] drm/exynos: dp: Lower level of EDID read success message Don't pollute the dmesg with EDID read success message as an error. Printing as debug should be fine. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_dp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c index 441ef06b8894..30feb7d06624 100644 --- a/drivers/gpu/drm/exynos/exynos_dp_core.c +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c @@ -195,7 +195,7 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp) } } - dev_err(dp->dev, "EDID Read success!\n"); + dev_dbg(dp->dev, "EDID Read success!\n"); return 0; } From 1e70897d0e20f988abedcf73b33684ecd2be9511 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Fri, 8 May 2015 18:47:31 -0300 Subject: [PATCH 603/652] pwm: img: Impose upper and lower timebase steps value The PWM hardware on Pistachio platform has a maximum timebase steps value to 255. To fix it, let's introduce a compatible-specific data structure to contain the SoC-specific details and use it to specify a maximum timebase. Also, let's limit the minimum timebase to 16 steps, to allow a sane range of duty cycle steps. Fixes: 277bb6a29e00 ("pwm: Imagination Technologies PWM DAC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Signed-off-by: Thierry Reding --- drivers/pwm/pwm-img.c | 76 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 64 insertions(+), 12 deletions(-) diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c index 476171a768d6..8a029f9bc18c 100644 --- a/drivers/pwm/pwm-img.c +++ b/drivers/pwm/pwm-img.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -38,7 +39,22 @@ #define PERIP_PWM_PDM_CONTROL_CH_MASK 0x1 #define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch) ((ch) * 4) -#define MAX_TMBASE_STEPS 65536 +/* + * PWM period is specified with a timebase register, + * in number of step periods. The PWM duty cycle is also + * specified in step periods, in the [0, $timebase] range. + * In other words, the timebase imposes the duty cycle + * resolution. Therefore, let's constraint the timebase to + * a minimum value to allow a sane range of duty cycle values. + * Imposing a minimum timebase, will impose a maximum PWM frequency. + * + * The value chosen is completely arbitrary. + */ +#define MIN_TMBASE_STEPS 16 + +struct img_pwm_soc_data { + u32 max_timebase; +}; struct img_pwm_chip { struct device *dev; @@ -47,6 +63,9 @@ struct img_pwm_chip { struct clk *sys_clk; void __iomem *base; struct regmap *periph_regs; + int max_period_ns; + int min_period_ns; + const struct img_pwm_soc_data *data; }; static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip) @@ -72,24 +91,31 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, u32 val, div, duty, timebase; unsigned long mul, output_clk_hz, input_clk_hz; struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); + unsigned int max_timebase = pwm_chip->data->max_timebase; + + if (period_ns < pwm_chip->min_period_ns || + period_ns > pwm_chip->max_period_ns) { + dev_err(chip->dev, "configured period not in range\n"); + return -ERANGE; + } input_clk_hz = clk_get_rate(pwm_chip->pwm_clk); output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns); mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz); - if (mul <= MAX_TMBASE_STEPS) { + if (mul <= max_timebase) { div = PWM_CTRL_CFG_NO_SUB_DIV; timebase = DIV_ROUND_UP(mul, 1); - } else if (mul <= MAX_TMBASE_STEPS * 8) { + } else if (mul <= max_timebase * 8) { div = PWM_CTRL_CFG_SUB_DIV0; timebase = DIV_ROUND_UP(mul, 8); - } else if (mul <= MAX_TMBASE_STEPS * 64) { + } else if (mul <= max_timebase * 64) { div = PWM_CTRL_CFG_SUB_DIV1; timebase = DIV_ROUND_UP(mul, 64); - } else if (mul <= MAX_TMBASE_STEPS * 512) { + } else if (mul <= max_timebase * 512) { div = PWM_CTRL_CFG_SUB_DIV0_DIV1; timebase = DIV_ROUND_UP(mul, 512); - } else if (mul > MAX_TMBASE_STEPS * 512) { + } else if (mul > max_timebase * 512) { dev_err(chip->dev, "failed to configure timebase steps/divider value\n"); return -EINVAL; @@ -143,11 +169,27 @@ static const struct pwm_ops img_pwm_ops = { .owner = THIS_MODULE, }; +static const struct img_pwm_soc_data pistachio_pwm = { + .max_timebase = 255, +}; + +static const struct of_device_id img_pwm_of_match[] = { + { + .compatible = "img,pistachio-pwm", + .data = &pistachio_pwm, + }, + { } +}; +MODULE_DEVICE_TABLE(of, img_pwm_of_match); + static int img_pwm_probe(struct platform_device *pdev) { int ret; + u64 val; + unsigned long clk_rate; struct resource *res; struct img_pwm_chip *pwm; + const struct of_device_id *of_dev_id; pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); if (!pwm) @@ -160,6 +202,11 @@ static int img_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->base)) return PTR_ERR(pwm->base); + of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev); + if (!of_dev_id) + return -ENODEV; + pwm->data = of_dev_id->data; + pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "img,cr-periph"); if (IS_ERR(pwm->periph_regs)) @@ -189,6 +236,17 @@ static int img_pwm_probe(struct platform_device *pdev) goto disable_sysclk; } + clk_rate = clk_get_rate(pwm->pwm_clk); + + /* The maximum input clock divider is 512 */ + val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase; + do_div(val, clk_rate); + pwm->max_period_ns = val; + + val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS; + do_div(val, clk_rate); + pwm->min_period_ns = val; + pwm->chip.dev = &pdev->dev; pwm->chip.ops = &img_pwm_ops; pwm->chip.base = -1; @@ -228,12 +286,6 @@ static int img_pwm_remove(struct platform_device *pdev) return pwmchip_remove(&pwm_chip->chip); } -static const struct of_device_id img_pwm_of_match[] = { - { .compatible = "img,pistachio-pwm", }, - { } -}; -MODULE_DEVICE_TABLE(of, img_pwm_of_match); - static struct platform_driver img_pwm_driver = { .driver = { .name = "img-pwm", From b5d721d761fccf491f92eefc611e318561683d0a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2015 17:06:14 -0700 Subject: [PATCH 604/652] inet: properly align icsk_ca_priv tcp_illinois and upcoming tcp_cdg require 64bit alignment of icsk_ca_priv x86 does not care, but other architectures might. Fixes: 05cbc0db03e82 ("ipv4: Create probe timer for tcp PMTU as per RFC4821") Signed-off-by: Eric Dumazet Cc: Fan Du Acked-by: Fan Du Signed-off-by: David S. Miller --- include/net/inet_connection_sock.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index 48a815823587..497bc14cdb85 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -129,9 +129,10 @@ struct inet_connection_sock { u32 probe_timestamp; } icsk_mtup; - u32 icsk_ca_priv[16]; u32 icsk_user_timeout; -#define ICSK_CA_PRIV_SIZE (16 * sizeof(u32)) + + u64 icsk_ca_priv[64 / sizeof(u64)]; +#define ICSK_CA_PRIV_SIZE (8 * sizeof(u64)) }; #define ICSK_TIME_RETRANS 1 /* Retransmit timer */ From 1173ff09b9c57be8248427b7be161f7599dccd6b Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 19 May 2015 09:07:27 +0200 Subject: [PATCH 605/652] watchdog: fix double lock in watchdog_nmi_enable_all Commit ab992dc38f9a ("watchdog: Fix merge 'conflict'") has introduced an obvious deadlock because of a typo. watchdog_proc_mutex should be unlocked on exit. Thanks to Miroslav Benes who was staring at the code with me and noticed this. Signed-off-by: Michal Hocko Duh-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- kernel/watchdog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 506edcc500c4..581a68a04c64 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -621,7 +621,7 @@ void watchdog_nmi_enable_all(void) put_online_cpus(); unlock: - mutex_lock(&watchdog_proc_mutex); + mutex_unlock(&watchdog_proc_mutex); } void watchdog_nmi_disable_all(void) From 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 19 May 2015 18:40:49 +0100 Subject: [PATCH 606/652] xen/events: don't bind non-percpu VIRQs with percpu chip A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel Cc: --- drivers/tty/hvc/hvc_xen.c | 2 +- drivers/xen/events/events_base.c | 12 ++++++++---- include/xen/events.h | 2 +- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 5bab1c684bb1..7a3d146a5f0e 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -289,7 +289,7 @@ static int xen_initial_domain_console_init(void) return -ENOMEM; } - info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0); + info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false); info->vtermno = HVC_COOKIE; spin_lock(&xencons_lock); diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 2b8553bd8715..38387950490e 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -957,7 +957,7 @@ unsigned xen_evtchn_nr_channels(void) } EXPORT_SYMBOL_GPL(xen_evtchn_nr_channels); -int bind_virq_to_irq(unsigned int virq, unsigned int cpu) +int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu) { struct evtchn_bind_virq bind_virq; int evtchn, irq, ret; @@ -971,8 +971,12 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu) if (irq < 0) goto out; - irq_set_chip_and_handler_name(irq, &xen_percpu_chip, - handle_percpu_irq, "virq"); + if (percpu) + irq_set_chip_and_handler_name(irq, &xen_percpu_chip, + handle_percpu_irq, "virq"); + else + irq_set_chip_and_handler_name(irq, &xen_dynamic_chip, + handle_edge_irq, "virq"); bind_virq.virq = virq; bind_virq.vcpu = cpu; @@ -1062,7 +1066,7 @@ int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu, { int irq, retval; - irq = bind_virq_to_irq(virq, cpu); + irq = bind_virq_to_irq(virq, cpu, irqflags & IRQF_PERCPU); if (irq < 0) return irq; retval = request_irq(irq, handler, irqflags, devname, dev_id); diff --git a/include/xen/events.h b/include/xen/events.h index 5321cd9636e6..7d95fdf9cf3e 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -17,7 +17,7 @@ int bind_evtchn_to_irqhandler(unsigned int evtchn, irq_handler_t handler, unsigned long irqflags, const char *devname, void *dev_id); -int bind_virq_to_irq(unsigned int virq, unsigned int cpu); +int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu); int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu, irq_handler_t handler, unsigned long irqflags, const char *devname, From 33b4b015e1a1ca7a8fdce40af5e71642a8ea355c Mon Sep 17 00:00:00 2001 From: Henning Rogge Date: Mon, 18 May 2015 21:08:49 +0200 Subject: [PATCH 607/652] net/ipv6/udp: Fix ipv6 multicast socket filter regression Commit <5cf3d46192fc> ("udp: Simplify__udp*_lib_mcast_deliver") simplified the filter for incoming IPv6 multicast but removed the check of the local socket address and the UDP destination address. This patch restores the filter to prevent sockets bound to a IPv6 multicast IP to receive other UDP traffic link unicast. Signed-off-by: Henning Rogge Fixes: 5cf3d46192fc ("udp: Simplify__udp*_lib_mcast_deliver") Cc: "David S. Miller" Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/udp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 3477c919fcc8..c2ec41617a35 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -731,7 +731,9 @@ static bool __udp_v6_is_mcast_sock(struct net *net, struct sock *sk, (inet->inet_dport && inet->inet_dport != rmt_port) || (!ipv6_addr_any(&sk->sk_v6_daddr) && !ipv6_addr_equal(&sk->sk_v6_daddr, rmt_addr)) || - (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)) + (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif) || + (!ipv6_addr_any(&sk->sk_v6_rcv_saddr) && + !ipv6_addr_equal(&sk->sk_v6_rcv_saddr, loc_addr))) return false; if (!inet6_mc_check(sk, loc_addr, rmt_addr)) return false; From da34ac7626b571d262f92b93f11eb32dd58d9c4e Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 18 May 2015 12:31:44 -0700 Subject: [PATCH 608/652] tcp: only undo on partial ACKs in CA_Loss Undo based on TCP timestamps should only happen on ACKs that advance SND_UNA, according to the Eifel algorithm in RFC 3522: Section 3.2: (4) If the value of the Timestamp Echo Reply field of the acceptable ACK's Timestamps option is smaller than the value of RetransmitTS, then proceed to step (5), Section Terminology: We use the term 'acceptable ACK' as defined in [RFC793]. That is an ACK that acknowledges previously unacknowledged data. This is because upon receiving an out-of-order packet, the receiver returns the last timestamp that advances RCV_NXT, not the current timestamp of the packet in the DUPACK. Without checking the flag, the DUPACK will cause tcp_packet_delayed() to return true and tcp_try_undo_loss() will revert cwnd reduction. Note that we check the condition in CA_Recovery already by only calling tcp_try_undo_partial() if FLAG_SND_UNA_ADVANCED is set or tcp_try_undo_recovery() if snd_una crosses high_seq. Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index bc790ea9960f..9faf775a8c4a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2698,11 +2698,16 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) struct tcp_sock *tp = tcp_sk(sk); bool recovered = !before(tp->snd_una, tp->high_seq); + if ((flag & FLAG_SND_UNA_ADVANCED) && + tcp_try_undo_loss(sk, false)) + return; + if (tp->frto) { /* F-RTO RFC5682 sec 3.1 (sack enhanced version). */ /* Step 3.b. A timeout is spurious if not all data are * lost, i.e., never-retransmitted data are (s)acked. */ - if (tcp_try_undo_loss(sk, flag & FLAG_ORIG_SACK_ACKED)) + if ((flag & FLAG_ORIG_SACK_ACKED) && + tcp_try_undo_loss(sk, true)) return; if (after(tp->snd_nxt, tp->high_seq) && @@ -2732,8 +2737,6 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) else if (flag & FLAG_SND_UNA_ADVANCED) tcp_reset_reno_sack(tp); } - if (tcp_try_undo_loss(sk, false)) - return; tcp_xmit_retransmit_queue(sk); } From b7b0ed910cd8450db6d98cd4361c644bb1c88412 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 18 May 2015 12:31:45 -0700 Subject: [PATCH 609/652] tcp: don't over-send F-RTO probes After sending the new data packets to probe (step 2), F-RTO may incorrectly send more probes if the next ACK advances SND_UNA and does not sack new packet. However F-RTO RFC 5682 probes at most once. This bug may cause sender to always send new data instead of repairing holes, inducing longer HoL blocking on the receiver for the application. Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 9faf775a8c4a..243d674b3ef5 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2710,9 +2710,9 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) tcp_try_undo_loss(sk, true)) return; - if (after(tp->snd_nxt, tp->high_seq) && - (flag & FLAG_DATA_SACKED || is_dupack)) { - tp->frto = 0; /* Loss was real: 2nd part of step 3.a */ + if (after(tp->snd_nxt, tp->high_seq)) { + if (flag & FLAG_DATA_SACKED || is_dupack) + tp->frto = 0; /* Step 3.a. loss was real */ } else if (flag & FLAG_SND_UNA_ADVANCED && !recovered) { tp->high_seq = tp->snd_nxt; __tcp_push_pending_frames(sk, tcp_current_mss(sk), From 2c2ed5aa0154c0be67f98c970de6b5587dbc045a Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 19 May 2015 12:49:50 -0700 Subject: [PATCH 610/652] btrfs: clear 'ret' in btrfs_check_shared() loop btrfs_check_shared() is leaking a return value of '1' from find_parent_nodes(). As a result, callers (in this case, extent_fiemap()) are told extents are shared when they are not. This in turn broke fiemap on btrfs for kernels v3.18 and up. The fix is simple - we just have to clear 'ret' after we are done processing the results of find_parent_nodes(). It wasn't clear to me at first what was happening with return values in btrfs_check_shared() and find_parent_nodes() - thanks to Josef for the help on irc. I added documentation to both functions to make things more clear for the next hacker who might come across them. If we could queue this up for -stable too that would be great. Signed-off-by: Mark Fasheh Reviewed-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/backref.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 9de772ee0031..614aaa1969bd 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -880,6 +880,8 @@ static int __add_keyed_refs(struct btrfs_fs_info *fs_info, * indirect refs to their parent bytenr. * When roots are found, they're added to the roots list * + * NOTE: This can return values > 0 + * * FIXME some caching might speed things up */ static int find_parent_nodes(struct btrfs_trans_handle *trans, @@ -1198,6 +1200,19 @@ int btrfs_find_all_roots(struct btrfs_trans_handle *trans, return ret; } +/** + * btrfs_check_shared - tell us whether an extent is shared + * + * @trans: optional trans handle + * + * btrfs_check_shared uses the backref walking code but will short + * circuit as soon as it finds a root or inode that doesn't match the + * one passed in. This provides a significant performance benefit for + * callers (such as fiemap) which want to know whether the extent is + * shared but do not need a ref count. + * + * Return: 0 if extent is not shared, 1 if it is shared, < 0 on error. + */ int btrfs_check_shared(struct btrfs_trans_handle *trans, struct btrfs_fs_info *fs_info, u64 root_objectid, u64 inum, u64 bytenr) @@ -1226,11 +1241,13 @@ int btrfs_check_shared(struct btrfs_trans_handle *trans, ret = find_parent_nodes(trans, fs_info, bytenr, elem.seq, tmp, roots, NULL, root_objectid, inum); if (ret == BACKREF_FOUND_SHARED) { + /* this is the only condition under which we return 1 */ ret = 1; break; } if (ret < 0 && ret != -ENOENT) break; + ret = 0; node = ulist_next(tmp, &uiter); if (!node) break; From a96295965b600f2dc6ad661c4803c86e87db3d7b Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 18 May 2015 19:11:40 +0100 Subject: [PATCH 611/652] Btrfs: fix racy system chunk allocation when setting block group ro If while setting a block group read-only we end up allocating a system chunk, through check_system_chunk(), we were not doing it while holding the chunk mutex which is a problem if a concurrent chunk allocation is happening, through do_chunk_alloc(), as it means both block groups can end up using the same logical addresses and physical regions in the device(s). So make sure we hold the chunk mutex. Cc: stable@vger.kernel.org # 4.0+ Fixes: 2f0810880f08 ("btrfs: delete chunk allocation attemp when setting block group ro") Signed-off-by: Filipe Manana Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 2 ++ fs/btrfs/volumes.c | 1 + 2 files changed, 3 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 7effed6f2fa6..45e3f086790b 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -8842,7 +8842,9 @@ again: out: if (cache->flags & BTRFS_BLOCK_GROUP_SYSTEM) { alloc_flags = update_block_group_flags(root, cache->flags); + lock_chunks(root->fs_info->chunk_root); check_system_chunk(trans, root, alloc_flags); + unlock_chunks(root->fs_info->chunk_root); } mutex_unlock(&root->fs_info->ro_block_group_mutex); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 96aebf3bcd5b..174f5e1e00ab 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4625,6 +4625,7 @@ int btrfs_alloc_chunk(struct btrfs_trans_handle *trans, { u64 chunk_offset; + ASSERT(mutex_is_locked(&extent_root->fs_info->chunk_mutex)); chunk_offset = find_next_chunk(extent_root->fs_info); return __btrfs_alloc_chunk(trans, extent_root, chunk_offset, type); } From 976fa9a3ac9223d134cb4e1e3acf0e57160ee924 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 May 2015 17:20:36 +0200 Subject: [PATCH 612/652] ALSA: sound/atmel/ac97c.c: remove unused variable The recently added DT support for the ac97 driver is causing a gcc warning: sound/atmel/ac97c.c: In function 'atmel_ac97c_probe_dt': sound/atmel/ac97c.c:919:29: warning: unused variable 'match' [-Wunused-variable] const struct of_device_id *match; The variable is clearly unused, so we can remove it. Signed-off-by: Arnd Bergmann Acked-by: Alexander Stein Signed-off-by: Takashi Iwai --- sound/atmel/ac97c.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index cf4cedf2b420..6dad042630d8 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -916,7 +916,6 @@ static struct ac97c_platform_data *atmel_ac97c_probe_dt(struct device *dev) { struct ac97c_platform_data *pdata; struct device_node *node = dev->of_node; - const struct of_device_id *match; if (!node) { dev_err(dev, "Device does not have associated DT data\n"); From 48f4b3a2ece560e37232fe9d681cd2ff0f3ff10d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 May 2015 06:49:37 +0200 Subject: [PATCH 613/652] ALSA: hda - Reduce verbs by node power-saves The widget (node) power-saves restore the widget states at each transition from D3 to D0 on each node. This was added in the commit [d545a57c5f84:ALSA: hda - Sync node attributes at resume from widget power saving]. However, the test was rater false-positive; this wasn't needed for any codecs. Since the resync may take significant number of additional verbs to be executed, it's better to reduce it. Let's disable it for now again. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 788f969b1a68..1c8678775f40 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -844,8 +844,16 @@ static hda_nid_t path_power_update(struct hda_codec *codec, snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, state); changed = nid; + /* all known codecs seem to be capable to handl + * widgets state even in D3, so far. + * if any new codecs need to restore the widget + * states after D0 transition, call the function + * below. + */ +#if 0 /* disabled */ if (state == AC_PWRST_D0) snd_hdac_regmap_sync_node(&codec->core, nid); +#endif } } return changed; From 219f47e4f96442a7fe8fb646c59c6730690a9e66 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 May 2015 06:56:23 +0200 Subject: [PATCH 614/652] ALSA: hda - Disable widget power-saving for ALC292 & co We've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled. This patch disables the widget power-saving for such codecs. Reported-by: Jonathan McDowell Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2e246fe495f6..31f8f13be907 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin = 0x18; - codec->power_save_node = 1; + if (codec->core.vendor_id != 0x10ec0292) + codec->power_save_node = 1; snd_hda_pick_fixup(codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups); From 26ba61f871b4aa9958bcebffcbeb558094d75928 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 19 May 2015 17:42:02 -0700 Subject: [PATCH 615/652] HID: wacom: fix an Oops caused by wacom_wac_finger_count_touches We assumed all touch interfaces report touch data. But, Bamboo and Intuos non-touch devices report express keys on touch interface. We need to check touch_max before counting touches. Reported-by: Tasos Sahanidis Signed-off-by: Ping Cheng Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index fa54d3290659..adf959dcfa5d 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1072,6 +1072,9 @@ static int wacom_wac_finger_count_touches(struct wacom_wac *wacom) int count = 0; int i; + if (!touch_max) + return 0; + /* non-HID_GENERIC single touch input doesn't call this routine */ if ((touch_max == 1) && (wacom->features.type == HID_GENERIC)) return wacom->hid_data.tipswitch && From e8fd5e9e9984675f45b9a5485909c143fbde248f Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 8 May 2015 14:32:56 +0200 Subject: [PATCH 616/652] kvm: fix crash in kvm_vcpu_reload_apic_access_page memslot->userfault_addr is set by the kernel with a mmap executed from the kernel but the userland can still munmap it and lead to the below oops after memslot->userfault_addr points to a host virtual address that has no vma or mapping. [ 327.538306] BUG: unable to handle kernel paging request at fffffffffffffffe [ 327.538407] IP: [] put_page+0x5/0x50 [ 327.538474] PGD 1a01067 PUD 1a03067 PMD 0 [ 327.538529] Oops: 0000 [#1] SMP [ 327.538574] Modules linked in: macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_filter ip_tables tun bridge stp llc rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ipmi_devintf iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp dcdbas intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd pcspkr sb_edac edac_core ipmi_si ipmi_msghandler acpi_pad wmi acpi_power_meter lpc_ich mfd_core mei_me [ 327.539488] mei shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc mlx4_ib ib_sa ib_mad ib_core mlx4_en vxlan ib_addr ip_tunnel xfs libcrc32c sd_mod crc_t10dif crct10dif_common crc32c_intel mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci i2c_core libahci mlx4_core libata tg3 ptp pps_core megaraid_sas ntb dm_mirror dm_region_hash dm_log dm_mod [ 327.539956] CPU: 3 PID: 3161 Comm: qemu-kvm Not tainted 3.10.0-240.el7.userfault19.4ca4011.x86_64.debug #1 [ 327.540045] Hardware name: Dell Inc. PowerEdge R420/0CN7CM, BIOS 2.1.2 01/20/2014 [ 327.540115] task: ffff8803280ccf00 ti: ffff880317c58000 task.ti: ffff880317c58000 [ 327.540184] RIP: 0010:[] [] put_page+0x5/0x50 [ 327.540261] RSP: 0018:ffff880317c5bcf8 EFLAGS: 00010246 [ 327.540313] RAX: 00057ffffffff000 RBX: ffff880616a20000 RCX: 0000000000000000 [ 327.540379] RDX: 0000000000002014 RSI: 00057ffffffff000 RDI: fffffffffffffffe [ 327.540445] RBP: ffff880317c5bd10 R08: 0000000000000103 R09: 0000000000000000 [ 327.540511] R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffffe [ 327.540576] R13: 0000000000000000 R14: ffff880317c5bd70 R15: ffff880317c5bd50 [ 327.540643] FS: 00007fd230b7f700(0000) GS:ffff880630800000(0000) knlGS:0000000000000000 [ 327.540717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 327.540771] CR2: fffffffffffffffe CR3: 000000062a2c3000 CR4: 00000000000427e0 [ 327.540837] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 327.540904] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 327.540974] Stack: [ 327.541008] ffffffffa05d6d0c ffff880616a20000 0000000000000000 ffff880317c5bdc0 [ 327.541093] ffffffffa05ddaa2 0000000000000000 00000000002191bf 00000042f3feab2d [ 327.541177] 00000042f3feab2d 0000000000000002 0000000000000001 0321000000000000 [ 327.541261] Call Trace: [ 327.541321] [] ? kvm_vcpu_reload_apic_access_page+0x6c/0x80 [kvm] [ 327.543615] [] vcpu_enter_guest+0x3f2/0x10f0 [kvm] [ 327.545918] [] kvm_arch_vcpu_ioctl_run+0x2b0/0x5a0 [kvm] [ 327.548211] [] ? kvm_arch_vcpu_ioctl_run+0xa2/0x5a0 [kvm] [ 327.550500] [] kvm_vcpu_ioctl+0x2b5/0x680 [kvm] [ 327.552768] [] ? creds_are_invalid.part.1+0x12/0x50 [ 327.555069] [] ? creds_are_invalid+0x21/0x30 [ 327.557373] [] ? inode_has_perm.isra.49.constprop.65+0x26/0x80 [ 327.559663] [] do_vfs_ioctl+0x305/0x530 [ 327.561917] [] SyS_ioctl+0xa1/0xc0 [ 327.564185] [] system_call_fastpath+0x16/0x1b [ 327.566480] Code: 0b 31 f6 4c 89 e7 e8 4b 7f ff ff 0f 0b e8 24 fd ff ff e9 a9 fd ff ff 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <48> f7 07 00 c0 00 00 55 48 89 e5 75 2a 8b 47 1c 85 c0 74 1e f0 Signed-off-by: Andrea Arcangeli Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 986b3f5d0523..5f3818846465 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6195,6 +6195,8 @@ void kvm_vcpu_reload_apic_access_page(struct kvm_vcpu *vcpu) return; page = gfn_to_page(vcpu->kvm, APIC_DEFAULT_PHYS_BASE >> PAGE_SHIFT); + if (is_error_page(page)) + return; kvm_x86_ops->set_apic_access_page_addr(vcpu, page_to_phys(page)); /* From 0fdd74f7784b5cdff7075736992bbb149b1ae49c Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 20 May 2015 11:33:43 +0200 Subject: [PATCH 617/652] Revert "KVM: x86: drop fpu_activate hook" This reverts commit 4473b570a7ebb502f63f292ccfba7df622e5fdd3. We'll use the hook again. Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/svm.c | 1 + arch/x86/kvm/vmx.c | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index e61c3a4ee131..5a1faf3f043e 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -744,6 +744,7 @@ struct kvm_x86_ops { void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg); unsigned long (*get_rflags)(struct kvm_vcpu *vcpu); void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags); + void (*fpu_activate)(struct kvm_vcpu *vcpu); void (*fpu_deactivate)(struct kvm_vcpu *vcpu); void (*tlb_flush)(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index ce741b8650f6..9afa233b5482 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -4381,6 +4381,7 @@ static struct kvm_x86_ops svm_x86_ops = { .cache_reg = svm_cache_reg, .get_rflags = svm_get_rflags, .set_rflags = svm_set_rflags, + .fpu_activate = svm_fpu_activate, .fpu_deactivate = svm_fpu_deactivate, .tlb_flush = svm_flush_tlb, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index f7b61687bd79..2d73807f0d31 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -10185,6 +10185,7 @@ static struct kvm_x86_ops vmx_x86_ops = { .cache_reg = vmx_cache_reg, .get_rflags = vmx_get_rflags, .set_rflags = vmx_set_rflags, + .fpu_activate = vmx_fpu_activate, .fpu_deactivate = vmx_fpu_deactivate, .tlb_flush = vmx_flush_tlb, From c447e76b4cabb49ddae8e49c5758f031f35d55fb Mon Sep 17 00:00:00 2001 From: Liang Li Date: Thu, 21 May 2015 04:41:25 +0800 Subject: [PATCH 618/652] kvm/fpu: Enable eager restore kvm FPU for MPX The MPX feature requires eager KVM FPU restore support. We have verified that MPX cannot work correctly with the current lazy KVM FPU restore mechanism. Eager KVM FPU restore should be enabled if the MPX feature is exposed to VM. Signed-off-by: Yang Zhang Signed-off-by: Liang Li [Also activate the FPU on AMD processors. - Paolo] Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/cpuid.c | 4 ++++ arch/x86/kvm/cpuid.h | 8 ++++++++ arch/x86/kvm/x86.c | 16 ++++++++++++++-- 4 files changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 5a1faf3f043e..f4a555beef19 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -401,6 +401,7 @@ struct kvm_vcpu_arch { struct kvm_mmu_memory_cache mmu_page_header_cache; struct fpu guest_fpu; + bool eager_fpu; u64 xcr0; u64 guest_supported_xcr0; u32 guest_xstate_size; diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 59b69f6a2844..1d08ad3582d0 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -16,6 +16,8 @@ #include #include #include +#include /* For use_eager_fpu. Ugh! */ +#include /* For use_eager_fpu. Ugh! */ #include #include #include "cpuid.h" @@ -95,6 +97,8 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu) if (best && (best->eax & (F(XSAVES) | F(XSAVEC)))) best->ebx = xstate_required_size(vcpu->arch.xcr0, true); + vcpu->arch.eager_fpu = guest_cpuid_has_mpx(vcpu); + /* * The existing code assumes virtual address is 48-bit in the canonical * address checks; exit if it is ever changed. diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index c3b1ad9fca81..496b3695d3d3 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -117,4 +117,12 @@ static inline bool guest_cpuid_has_rtm(struct kvm_vcpu *vcpu) best = kvm_find_cpuid_entry(vcpu, 7, 0); return best && (best->ebx & bit(X86_FEATURE_RTM)); } + +static inline bool guest_cpuid_has_mpx(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 7, 0); + return best && (best->ebx & bit(X86_FEATURE_MPX)); +} #endif diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5f3818846465..ea306adbbc13 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7060,7 +7060,9 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) fpu_save_init(&vcpu->arch.guest_fpu); __kernel_fpu_end(); ++vcpu->stat.fpu_reload; - kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); + if (!vcpu->arch.eager_fpu) + kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); + trace_kvm_fpu(0); } @@ -7076,11 +7078,21 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) { + struct kvm_vcpu *vcpu; + if (check_tsc_unstable() && atomic_read(&kvm->online_vcpus) != 0) printk_once(KERN_WARNING "kvm: SMP vm created on host with unstable TSC; " "guest TSC will not be reliable\n"); - return kvm_x86_ops->vcpu_create(kvm, id); + + vcpu = kvm_x86_ops->vcpu_create(kvm, id); + + /* + * Activate fpu unconditionally in case the guest needs eager FPU. It will be + * deactivated soon if it doesn't. + */ + kvm_x86_ops->fpu_activate(vcpu); + return vcpu; } int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) From 3bfe049807c240344b407e3cfb74544927359817 Mon Sep 17 00:00:00 2001 From: Francesco Ruggeri Date: Sun, 17 May 2015 14:30:31 -0700 Subject: [PATCH 619/652] netfilter: nfnetlink_{log,queue}: Register pernet in first place nfnetlink_{log,queue}_init() register the netlink callback nf*_rcv_nl_event before registering the pernet_subsys, but the callback relies on data structures allocated by pernet init functions. When nfnetlink_{log,queue} is loaded, if a netlink message is received after the netlink callback is registered but before the pernet_subsys is registered, the kernel will panic in the sequence nfulnl_rcv_nl_event nfnl_log_pernet net_generic BUG_ON(id == 0) where id is nfnl_log_net_id. The panic can be easily reproduced in 4.0.3 by: while true ;do modprobe nfnetlink_log ; rmmod nfnetlink_log ; done & while true ;do ip netns add dummy ; ip netns del dummy ; done & This patch moves register_pernet_subsys to earlier in nfnetlink_log_init. Notice that the BUG_ON hit in 4.0.3 was recently removed in 2591ffd308 ["netns: remove BUG_ONs from net_generic()"]. Signed-off-by: Francesco Ruggeri Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_log.c | 19 ++++++++++--------- net/netfilter/nfnetlink_queue_core.c | 18 +++++++++--------- 2 files changed, 19 insertions(+), 18 deletions(-) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index 3ad91266c821..4ef1fae8445e 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -1073,7 +1073,13 @@ static struct pernet_operations nfnl_log_net_ops = { static int __init nfnetlink_log_init(void) { - int status = -ENOMEM; + int status; + + status = register_pernet_subsys(&nfnl_log_net_ops); + if (status < 0) { + pr_err("failed to register pernet ops\n"); + goto out; + } netlink_register_notifier(&nfulnl_rtnl_notifier); status = nfnetlink_subsys_register(&nfulnl_subsys); @@ -1088,28 +1094,23 @@ static int __init nfnetlink_log_init(void) goto cleanup_subsys; } - status = register_pernet_subsys(&nfnl_log_net_ops); - if (status < 0) { - pr_err("failed to register pernet ops\n"); - goto cleanup_logger; - } return status; -cleanup_logger: - nf_log_unregister(&nfulnl_logger); cleanup_subsys: nfnetlink_subsys_unregister(&nfulnl_subsys); cleanup_netlink_notifier: netlink_unregister_notifier(&nfulnl_rtnl_notifier); + unregister_pernet_subsys(&nfnl_log_net_ops); +out: return status; } static void __exit nfnetlink_log_fini(void) { - unregister_pernet_subsys(&nfnl_log_net_ops); nf_log_unregister(&nfulnl_logger); nfnetlink_subsys_unregister(&nfulnl_subsys); netlink_unregister_notifier(&nfulnl_rtnl_notifier); + unregister_pernet_subsys(&nfnl_log_net_ops); } MODULE_DESCRIPTION("netfilter userspace logging"); diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c index 0b98c7420239..11c7682fa0ea 100644 --- a/net/netfilter/nfnetlink_queue_core.c +++ b/net/netfilter/nfnetlink_queue_core.c @@ -1317,7 +1317,13 @@ static struct pernet_operations nfnl_queue_net_ops = { static int __init nfnetlink_queue_init(void) { - int status = -ENOMEM; + int status; + + status = register_pernet_subsys(&nfnl_queue_net_ops); + if (status < 0) { + pr_err("nf_queue: failed to register pernet ops\n"); + goto out; + } netlink_register_notifier(&nfqnl_rtnl_notifier); status = nfnetlink_subsys_register(&nfqnl_subsys); @@ -1326,19 +1332,13 @@ static int __init nfnetlink_queue_init(void) goto cleanup_netlink_notifier; } - status = register_pernet_subsys(&nfnl_queue_net_ops); - if (status < 0) { - pr_err("nf_queue: failed to register pernet ops\n"); - goto cleanup_subsys; - } register_netdevice_notifier(&nfqnl_dev_notifier); nf_register_queue_handler(&nfqh); return status; -cleanup_subsys: - nfnetlink_subsys_unregister(&nfqnl_subsys); cleanup_netlink_notifier: netlink_unregister_notifier(&nfqnl_rtnl_notifier); +out: return status; } @@ -1346,9 +1346,9 @@ static void __exit nfnetlink_queue_fini(void) { nf_unregister_queue_handler(); unregister_netdevice_notifier(&nfqnl_dev_notifier); - unregister_pernet_subsys(&nfnl_queue_net_ops); nfnetlink_subsys_unregister(&nfqnl_subsys); netlink_unregister_notifier(&nfqnl_rtnl_notifier); + unregister_pernet_subsys(&nfnl_queue_net_ops); rcu_barrier(); /* Wait for completion of call_rcu()'s */ } From 1086bbe97a074844188c6c988fa0b1a98c3ccbb9 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 19 May 2015 20:55:17 -0400 Subject: [PATCH 620/652] netfilter: ensure number of counters is >0 in do_replace() After improving setsockopt() coverage in trinity, I started triggering vmalloc failures pretty reliably from this code path: warn_alloc_failed+0xe9/0x140 __vmalloc_node_range+0x1be/0x270 vzalloc+0x4b/0x50 __do_replace+0x52/0x260 [ip_tables] do_ipt_set_ctl+0x15d/0x1d0 [ip_tables] nf_setsockopt+0x65/0x90 ip_setsockopt+0x61/0xa0 raw_setsockopt+0x16/0x60 sock_common_setsockopt+0x14/0x20 SyS_setsockopt+0x71/0xd0 It turns out we don't validate that the num_counters field in the struct we pass in from userspace is initialized. The same problem also exists in ebtables, arptables, ipv6, and the compat variants. Signed-off-by: Dave Jones Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/ebtables.c | 4 ++++ net/ipv4/netfilter/arp_tables.c | 6 ++++++ net/ipv4/netfilter/ip_tables.c | 6 ++++++ net/ipv6/netfilter/ip6_tables.c | 6 ++++++ 4 files changed, 22 insertions(+) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 91180a7fc943..24c7c96bf5f8 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1117,6 +1117,8 @@ static int do_replace(struct net *net, const void __user *user, return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct ebt_counter)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; tmp.name[sizeof(tmp.name) - 1] = 0; @@ -2159,6 +2161,8 @@ static int compat_copy_ebt_replace_from_user(struct ebt_replace *repl, return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct ebt_counter)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; memcpy(repl, &tmp, offsetof(struct ebt_replace, hook_entry)); diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index 13bfe84bf3ca..a61200754f4b 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -1075,6 +1075,9 @@ static int do_replace(struct net *net, const void __user *user, /* overflow check */ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); @@ -1499,6 +1502,9 @@ static int compat_do_replace(struct net *net, void __user *user, return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index c69db7fa25ee..2d0e265fef6e 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1262,6 +1262,9 @@ do_replace(struct net *net, const void __user *user, unsigned int len) /* overflow check */ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); @@ -1809,6 +1812,9 @@ compat_do_replace(struct net *net, void __user *user, unsigned int len) return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 1a732a1d3c8e..62f5b0d0bc9b 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1275,6 +1275,9 @@ do_replace(struct net *net, const void __user *user, unsigned int len) /* overflow check */ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); @@ -1822,6 +1825,9 @@ compat_do_replace(struct net *net, void __user *user, unsigned int len) return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); From faecbb45ebefb20260ad4a631e011e93c896cb73 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 20 May 2015 13:42:25 +0200 Subject: [PATCH 621/652] Revert "netfilter: bridge: query conntrack about skb dnat" This reverts commit c055d5b03bb4cb69d349d787c9787c0383abd8b2. There are two issues: 'dnat_took_place' made me think that this is related to -j DNAT/MASQUERADE. But thats only one part of the story. This is also relevant for SNAT when we undo snat translation in reverse/reply direction. Furthermore, I originally wanted to do this mainly to avoid storing ipv6 addresses once we make DNAT/REDIRECT work for ipv6 on bridges. However, I forgot about SNPT/DNPT which is stateless. So we can't escape storing address for ipv6 anyway. Might as well do it for ipv4 too. Reported-and-tested-by: Bernhard Thaler Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/skbuff.h | 1 + net/bridge/br_netfilter.c | 27 +++++++++------------------ 2 files changed, 10 insertions(+), 18 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 66e374d62f64..f15154a879c7 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -176,6 +176,7 @@ struct nf_bridge_info { struct net_device *physindev; struct net_device *physoutdev; char neigh_header[8]; + __be32 ipv4_daddr; }; #endif diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index ab55e2472beb..60ddfbeb47f5 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -37,10 +37,6 @@ #include #include -#if IS_ENABLED(CONFIG_NF_CONNTRACK) -#include -#endif - #include #include "br_private.h" #ifdef CONFIG_SYSCTL @@ -350,24 +346,15 @@ free_skb: return 0; } -static bool dnat_took_place(const struct sk_buff *skb) +static bool daddr_was_changed(const struct sk_buff *skb, + const struct nf_bridge_info *nf_bridge) { -#if IS_ENABLED(CONFIG_NF_CONNTRACK) - enum ip_conntrack_info ctinfo; - struct nf_conn *ct; - - ct = nf_ct_get(skb, &ctinfo); - if (!ct || nf_ct_is_untracked(ct)) - return false; - - return test_bit(IPS_DST_NAT_BIT, &ct->status); -#else - return false; -#endif + return ip_hdr(skb)->daddr != nf_bridge->ipv4_daddr; } /* This requires some explaining. If DNAT has taken place, * we will need to fix up the destination Ethernet address. + * This is also true when SNAT takes place (for the reply direction). * * There are two cases to consider: * 1. The packet was DNAT'ed to a device in the same bridge @@ -421,7 +408,7 @@ static int br_nf_pre_routing_finish(struct sock *sk, struct sk_buff *skb) nf_bridge->pkt_otherhost = false; } nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING; - if (dnat_took_place(skb)) { + if (daddr_was_changed(skb, nf_bridge)) { if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) { struct in_device *in_dev = __in_dev_get_rcu(dev); @@ -632,6 +619,7 @@ static unsigned int br_nf_pre_routing(const struct nf_hook_ops *ops, struct sk_buff *skb, const struct nf_hook_state *state) { + struct nf_bridge_info *nf_bridge; struct net_bridge_port *p; struct net_bridge *br; __u32 len = nf_bridge_encap_header_len(skb); @@ -669,6 +657,9 @@ static unsigned int br_nf_pre_routing(const struct nf_hook_ops *ops, if (!setup_pre_routing(skb)) return NF_DROP; + nf_bridge = nf_bridge_info_get(skb); + nf_bridge->ipv4_daddr = ip_hdr(skb)->daddr; + skb->protocol = htons(ETH_P_IP); NF_HOOK(NFPROTO_IPV4, NF_INET_PRE_ROUTING, state->sk, skb, From 35f1b4e96b9258a3668872b1139c51e5a23eb876 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Mon, 18 May 2015 20:53:55 +0200 Subject: [PATCH 622/652] ipv6: do not delete previously existing ECMP routes if add fails If adding a nexthop of an IPv6 multipath route fails, comment in ip6_route_multipath() says we are going to delete all nexthops already added. However, current implementation deletes even the routes it hasn't even tried to add yet. For example, running ip route add 1234:5678::/64 \ nexthop via fe80::aa dev dummy1 \ nexthop via fe80::bb dev dummy1 \ nexthop via fe80::cc dev dummy1 twice results in removing all routes first command added. Limit the second (delete) run to nexthops that succeeded in the first (add) run. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: Michal Kubecek Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/route.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index d3588885f097..3821a3517478 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2504,9 +2504,9 @@ static int ip6_route_multipath(struct fib6_config *cfg, int add) int attrlen; int err = 0, last_err = 0; + remaining = cfg->fc_mp_len; beginning: rtnh = (struct rtnexthop *)cfg->fc_mp; - remaining = cfg->fc_mp_len; /* Parse a Multipath Entry */ while (rtnh_ok(rtnh, remaining)) { @@ -2536,6 +2536,7 @@ beginning: * next hops that have been already added. */ add = 0; + remaining = cfg->fc_mp_len - remaining; goto beginning; } } From 27596472473a02cfef2908a6bcda7e55264ba6b7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Mon, 18 May 2015 20:54:00 +0200 Subject: [PATCH 623/652] ipv6: fix ECMP route replacement When replacing an IPv6 multipath route with "ip route replace", i.e. NLM_F_CREATE | NLM_F_REPLACE, fib6_add_rt2node() replaces only first matching route without fixing its siblings, resulting in corrupted siblings linked list; removing one of the siblings can then end in an infinite loop. IPv6 ECMP implementation is a bit different from IPv4 so that route replacement cannot work in exactly the same way. This should be a reasonable approximation: 1. If the new route is ECMP-able and there is a matching ECMP-able one already, replace it and all its siblings (if any). 2. If the new route is ECMP-able and no matching ECMP-able route exists, replace first matching non-ECMP-able (if any) or just add the new one. 3. If the new route is not ECMP-able, replace first matching non-ECMP-able route (if any) or add the new route. We also need to remove the NLM_F_REPLACE flag after replacing old route(s) by first nexthop of an ECMP route so that each subsequent nexthop does not replace previous one. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: Michal Kubecek Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/ip6_fib.c | 39 +++++++++++++++++++++++++++++++++++++-- net/ipv6/route.c | 11 +++++++---- 2 files changed, 44 insertions(+), 6 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 96dbffff5a24..bde57b113009 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -693,6 +693,7 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt, { struct rt6_info *iter = NULL; struct rt6_info **ins; + struct rt6_info **fallback_ins = NULL; int replace = (info->nlh && (info->nlh->nlmsg_flags & NLM_F_REPLACE)); int add = (!info->nlh || @@ -716,8 +717,13 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt, (info->nlh->nlmsg_flags & NLM_F_EXCL)) return -EEXIST; if (replace) { - found++; - break; + if (rt_can_ecmp == rt6_qualify_for_ecmp(iter)) { + found++; + break; + } + if (rt_can_ecmp) + fallback_ins = fallback_ins ?: ins; + goto next_iter; } if (iter->dst.dev == rt->dst.dev && @@ -753,9 +759,17 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt, if (iter->rt6i_metric > rt->rt6i_metric) break; +next_iter: ins = &iter->dst.rt6_next; } + if (fallback_ins && !found) { + /* No ECMP-able route found, replace first non-ECMP one */ + ins = fallback_ins; + iter = *ins; + found++; + } + /* Reset round-robin state, if necessary */ if (ins == &fn->leaf) fn->rr_ptr = NULL; @@ -815,6 +829,8 @@ add: } } else { + int nsiblings; + if (!found) { if (add) goto add; @@ -835,8 +851,27 @@ add: info->nl_net->ipv6.rt6_stats->fib_route_nodes++; fn->fn_flags |= RTN_RTINFO; } + nsiblings = iter->rt6i_nsiblings; fib6_purge_rt(iter, fn, info->nl_net); rt6_release(iter); + + if (nsiblings) { + /* Replacing an ECMP route, remove all siblings */ + ins = &rt->dst.rt6_next; + iter = *ins; + while (iter) { + if (rt6_qualify_for_ecmp(iter)) { + *ins = iter->dst.rt6_next; + fib6_purge_rt(iter, fn, info->nl_net); + rt6_release(iter); + nsiblings--; + } else { + ins = &iter->dst.rt6_next; + } + iter = *ins; + } + WARN_ON(nsiblings != 0); + } } return 0; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 3821a3517478..c73ae5039e46 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2541,11 +2541,14 @@ beginning: } } /* Because each route is added like a single route we remove - * this flag after the first nexthop (if there is a collision, - * we have already fail to add the first nexthop: - * fib6_add_rt2node() has reject it). + * these flags after the first nexthop: if there is a collision, + * we have already failed to add the first nexthop: + * fib6_add_rt2node() has rejected it; when replacing, old + * nexthops have been replaced by first new, the rest should + * be added to it. */ - cfg->fc_nlinfo.nlh->nlmsg_flags &= ~NLM_F_EXCL; + cfg->fc_nlinfo.nlh->nlmsg_flags &= ~(NLM_F_EXCL | + NLM_F_REPLACE); rtnh = rtnh_next(rtnh, &remaining); } From c15e10e71ce3b4ee78d85d80102a9621cde1edbd Mon Sep 17 00:00:00 2001 From: Tim Beale Date: Mon, 18 May 2015 15:38:38 +1200 Subject: [PATCH 624/652] net: phy: Make sure phy_start() always re-enables the phy interrupts This is an alternative way of fixing: commit db9683fb412d ("net: phy: Make sure PHY_RESUMING state change is always processed") When the PHY state transitions from PHY_HALTED to PHY_RESUMING, there are two things we need to do: 1). Re-enable interrupts (and power up the physical link, if powered down) 2). Update the PHY state and net-device based on the link status. There's no strict reason why #1 has to be done from within the main phy_state_machine() function. There is a risk that other changes to the PHY (e.g. setting speed/duplex, which calls phy_start_aneg()) could cause a subsequent state transition before phy_state_machine() has processed the PHY_RESUMING state change. This would leave the PHY with interrupts disabled and/or still in the BMCR_PDOWN/low-power mode. Moving enabling the interrupts and phy_resume() into phy_start() will guarantee this work always gets done. As the PHY is already in the HALTED state and interrupts are disabled, it shouldn't conflict with any work being done in phy_state_machine(). The downside of this change is that if the PHY_RESUMING state is ever entered from anywhere else, it'll also have to repeat this work. Signed-off-by: Tim Beale Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 710696d1af97..47cd578052fc 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -465,7 +465,7 @@ int phy_start_aneg(struct phy_device *phydev) if (err < 0) goto out_unlock; - if (phydev->state != PHY_HALTED && phydev->state != PHY_RESUMING) { + if (phydev->state != PHY_HALTED) { if (AUTONEG_ENABLE == phydev->autoneg) { phydev->state = PHY_AN; phydev->link_timeout = PHY_AN_TIMEOUT; @@ -742,6 +742,9 @@ EXPORT_SYMBOL(phy_stop); */ void phy_start(struct phy_device *phydev) { + bool do_resume = false; + int err = 0; + mutex_lock(&phydev->lock); switch (phydev->state) { @@ -752,11 +755,22 @@ void phy_start(struct phy_device *phydev) phydev->state = PHY_UP; break; case PHY_HALTED: + /* make sure interrupts are re-enabled for the PHY */ + err = phy_enable_interrupts(phydev); + if (err < 0) + break; + phydev->state = PHY_RESUMING; + do_resume = true; + break; default: break; } mutex_unlock(&phydev->lock); + + /* if phy was suspended, bring the physical link up again */ + if (do_resume) + phy_resume(phydev); } EXPORT_SYMBOL(phy_start); @@ -769,7 +783,7 @@ void phy_state_machine(struct work_struct *work) struct delayed_work *dwork = to_delayed_work(work); struct phy_device *phydev = container_of(dwork, struct phy_device, state_queue); - bool needs_aneg = false, do_suspend = false, do_resume = false; + bool needs_aneg = false, do_suspend = false; int err = 0; mutex_lock(&phydev->lock); @@ -888,14 +902,6 @@ void phy_state_machine(struct work_struct *work) } break; case PHY_RESUMING: - err = phy_clear_interrupt(phydev); - if (err) - break; - - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - if (err) - break; - if (AUTONEG_ENABLE == phydev->autoneg) { err = phy_aneg_done(phydev); if (err < 0) @@ -933,7 +939,6 @@ void phy_state_machine(struct work_struct *work) } phydev->adjust_link(phydev->attached_dev); } - do_resume = true; break; } @@ -943,8 +948,6 @@ void phy_state_machine(struct work_struct *work) err = phy_start_aneg(phydev); else if (do_suspend) phy_suspend(phydev); - else if (do_resume) - phy_resume(phydev); if (err < 0) phy_error(phydev); From c29ed5a4566fc7e0c5d06324d62974c6163d1e06 Mon Sep 17 00:00:00 2001 From: Ted Kim Date: Thu, 14 May 2015 12:49:01 -0700 Subject: [PATCH 625/652] ib/cm: Change reject message type when destroying cm_id Problem reported by: Ted Kim : We have a case where a Linux system and a non-Linux system are trying to interoperate. The Linux host is the active side and starts the connection establishment, but later decides to not go through with the connection setup and does rdma_destroy_id(). The rdma_destroy_id() eventually works its way down to cm_destroy_id() in core/cm.c, where a REJ is sent. The non-Linux system has some trouble recognizing the REJ because of: A. CM states which can't receive the REJ B. Some issues about REJ formatting (missing comm ID) ISSUE A: That part of the spec says, a Consumer Reject REJ can be sent for a connection abort, but it goes further and says: can send a REJ message with a "Consumer Reject" Reason code if they are in a CM state (i.e. REP Rcvd, MRA(REP) Sent, REQ Rcvd, MRA Sent) that allows a REJ to be sent (lines 35-38). Of the states listed there in that sentence, it would seem to limit the active side to using the Consumer Reject (for the abort case) in just the REP-Rcvd and MRA-REP-Sent states. That is basically only after the active side sees a REP (or alternatively goes down the state transitions to timeout in which case a Timeout REJ is sent). As a fix, in cm-destroy-id() move the IB-CM-MRA-REQ-RCVD case to the same as REQ-SENT. Essentially, make a REJ sent after getting an MRA on active side a timeout rather than Consumer- Reject, which is arguably more correct with the CM state diagrams previous to getting a REP. Signed-off-by: Ted Kim Signed-off-by: Sean Hefty --- drivers/infiniband/core/cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 0c1419105ff0..0271608a51c4 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -861,6 +861,7 @@ retest: cm_reject_sidr_req(cm_id_priv, IB_SIDR_REJECT); break; case IB_CM_REQ_SENT: + case IB_CM_MRA_REQ_RCVD: ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); spin_unlock_irq(&cm_id_priv->lock); ib_send_cm_rej(cm_id, IB_CM_REJ_TIMEOUT, @@ -879,7 +880,6 @@ retest: NULL, 0, NULL, 0); } break; - case IB_CM_MRA_REQ_RCVD: case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); From b0494532214bdfbf241e94fabab5dd46f7b82631 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 11 May 2015 17:53:10 +0300 Subject: [PATCH 626/652] libceph: request a new osdmap if lingering request maps to no osd This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114ec557 ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Ilya Dryomov Reviewed-by: Sage Weil --- net/ceph/osd_client.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 41a4abc7e98e..31d4b1ebff01 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -2017,20 +2017,29 @@ static void kick_requests(struct ceph_osd_client *osdc, bool force_resend, err = __map_request(osdc, req, force_resend || force_resend_writes); dout("__map_request returned %d\n", err); - if (err == 0) - continue; /* no change and no osd was specified */ if (err < 0) continue; /* hrm! */ - if (req->r_osd == NULL) { - dout("tid %llu maps to no valid osd\n", req->r_tid); - needmap++; /* request a newer map */ - continue; - } + if (req->r_osd == NULL || err > 0) { + if (req->r_osd == NULL) { + dout("lingering %p tid %llu maps to no osd\n", + req, req->r_tid); + /* + * A homeless lingering request makes + * no sense, as it's job is to keep + * a particular OSD connection open. + * Request a newer map and kick the + * request, knowing that it won't be + * resent until we actually get a map + * that can tell us where to send it. + */ + needmap++; + } - dout("kicking lingering %p tid %llu osd%d\n", req, req->r_tid, - req->r_osd ? req->r_osd->o_osd : -1); - __register_request(osdc, req); - __unregister_linger_request(osdc, req); + dout("kicking lingering %p tid %llu osd%d\n", req, + req->r_tid, req->r_osd ? req->r_osd->o_osd : -1); + __register_request(osdc, req); + __unregister_linger_request(osdc, req); + } } reset_changed_osds(osdc); mutex_unlock(&osdc->request_mutex); From 521a04d06a729e5971cdee7f84080387ed320527 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 11 May 2015 17:53:34 +0300 Subject: [PATCH 627/652] Revert "libceph: clear r_req_lru_item in __unregister_linger_request()" This reverts commit ba9d114ec5578e6e99a4dfa37ff8ae688040fd64. .. which introduced a regression that prevented all lingering requests requeued in kick_requests() from ever being sent to the OSDs, resulting in a lot of missed notifies. In retrospect it's pretty obvious that r_req_lru_item item in the case of lingering requests can be used not only for notarget, but also for unsent linkage due to how tightly actual map and enqueue operations are coupled in __map_request(). The assertion that was being silenced is taken care of in the previous ("libceph: request a new osdmap if lingering request maps to no osd") commit: by always kicking homeless lingering requests we ensure that none of them ends up on the notarget list outside of the critical section guarded by request_mutex. Cc: stable@vger.kernel.org # 3.18+, needs b0494532214b "libceph: request a new osdmap if lingering request maps to no osd" Signed-off-by: Ilya Dryomov Reviewed-by: Sage Weil --- net/ceph/osd_client.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 31d4b1ebff01..c4ec9239249a 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1306,8 +1306,6 @@ static void __unregister_linger_request(struct ceph_osd_client *osdc, if (list_empty(&req->r_osd_item)) req->r_osd = NULL; } - - list_del_init(&req->r_req_lru_item); /* can be on notarget */ ceph_osdc_put_request(req); } From 153c35b6cccc0c72de9fae06c8e2c8b2c47d79d4 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 19 May 2015 18:54:41 -0700 Subject: [PATCH 628/652] Btrfs: fix regression in raid level conversion Commit 2f0810880f082fa8ba66ab2c33b02e4ff9770a5e changed btrfs_set_block_group_ro to avoid trying to allocate new chunks with the new raid profile during conversion. This fixed failures when there was no space on the drive to allocate a new chunk, but the metadata reserves were sufficient to continue the conversion. But this ended up causing a regression when the drive had plenty of space to allocate new chunks, mostly because reduce_alloc_profile isn't using the new raid profile. Fixing btrfs_reduce_alloc_profile is a bigger patch. For now, do a partial revert of 2f0810880, and don't error out if we hit ENOSPC. Signed-off-by: Chris Mason Tested-by: Dave Sterba Reported-by: Holger Hoffstaette --- fs/btrfs/extent-tree.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 45e3f086790b..0ec3acd14cbf 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -8829,6 +8829,24 @@ again: goto again; } + /* + * if we are changing raid levels, try to allocate a corresponding + * block group with the new raid level. + */ + alloc_flags = update_block_group_flags(root, cache->flags); + if (alloc_flags != cache->flags) { + ret = do_chunk_alloc(trans, root, alloc_flags, + CHUNK_ALLOC_FORCE); + /* + * ENOSPC is allowed here, we may have enough space + * already allocated at the new raid level to + * carry on + */ + if (ret == -ENOSPC) + ret = 0; + if (ret < 0) + goto out; + } ret = set_block_group_ro(cache, 0); if (!ret) From c07678bb01374c510b0f6d4a3832c28ba33e9613 Mon Sep 17 00:00:00 2001 From: Matthew Finlay Date: Tue, 19 May 2015 00:11:48 -0700 Subject: [PATCH 629/652] IB/cma: Fix broken AF_IB UD support Support for using UD and AF_IB is currently broken. The IB_CM_SIDR_REQ_RECEIVED message is not handled properly in cma_save_net_info() and we end up falling into code that will try and process the request as ipv4/ipv6, which will end up failing. The resolution is to add a check for the SIDR_REQ and call cma_save_ib_info() with a NULL path record. Change cma_save_ib_info() to copy the src sib info from the listen_id when the path record is NULL. Reported-by: Hari Shankar Signed-off-by: Matt Finlay Acked-by: Sean Hefty Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 06441a43c3aa..38ffe0981503 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -845,18 +845,26 @@ static void cma_save_ib_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id listen_ib = (struct sockaddr_ib *) &listen_id->route.addr.src_addr; ib = (struct sockaddr_ib *) &id->route.addr.src_addr; ib->sib_family = listen_ib->sib_family; - ib->sib_pkey = path->pkey; - ib->sib_flowinfo = path->flow_label; - memcpy(&ib->sib_addr, &path->sgid, 16); + if (path) { + ib->sib_pkey = path->pkey; + ib->sib_flowinfo = path->flow_label; + memcpy(&ib->sib_addr, &path->sgid, 16); + } else { + ib->sib_pkey = listen_ib->sib_pkey; + ib->sib_flowinfo = listen_ib->sib_flowinfo; + ib->sib_addr = listen_ib->sib_addr; + } ib->sib_sid = listen_ib->sib_sid; ib->sib_sid_mask = cpu_to_be64(0xffffffffffffffffULL); ib->sib_scope_id = listen_ib->sib_scope_id; - ib = (struct sockaddr_ib *) &id->route.addr.dst_addr; - ib->sib_family = listen_ib->sib_family; - ib->sib_pkey = path->pkey; - ib->sib_flowinfo = path->flow_label; - memcpy(&ib->sib_addr, &path->dgid, 16); + if (path) { + ib = (struct sockaddr_ib *) &id->route.addr.dst_addr; + ib->sib_family = listen_ib->sib_family; + ib->sib_pkey = path->pkey; + ib->sib_flowinfo = path->flow_label; + memcpy(&ib->sib_addr, &path->dgid, 16); + } } static __be16 ss_get_port(const struct sockaddr_storage *ss) @@ -905,9 +913,11 @@ static int cma_save_net_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id { struct cma_hdr *hdr; - if ((listen_id->route.addr.src_addr.ss_family == AF_IB) && - (ib_event->event == IB_CM_REQ_RECEIVED)) { - cma_save_ib_info(id, listen_id, ib_event->param.req_rcvd.primary_path); + if (listen_id->route.addr.src_addr.ss_family == AF_IB) { + if (ib_event->event == IB_CM_REQ_RECEIVED) + cma_save_ib_info(id, listen_id, ib_event->param.req_rcvd.primary_path); + else if (ib_event->event == IB_CM_SIDR_REQ_RECEIVED) + cma_save_ib_info(id, listen_id, NULL); return 0; } From 72eceab743cf61082357068e0686ffac66fe47e5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 20 May 2015 14:37:41 -0700 Subject: [PATCH 630/652] Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad On v7 touchpads sometimes when 2 fingers are moved down on the touchpad until they "fall of" the touchpad, the second touch will report 0 for y (max y really since the y axis is inverted) and max x as coordinates, rather then reporting 0, 0 as is expected for a non touching finger. This commit detects this and treats these touches as non touching. See the evemu-recording here: https://bugzilla.redhat.com/attachment.cgi?id=1025058 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1221200 Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index e6708f6efb4d..7752bd59d4b7 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -941,6 +941,11 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, case V7_PACKET_ID_TWO: mt[1].x &= ~0x000F; mt[1].y |= 0x000F; + /* Detect false-postive touches where x & y report max value */ + if (mt[1].y == 0x7ff && mt[1].x == 0xff0) { + mt[1].x = 0; + /* y gets set to 0 at the end of this function */ + } break; case V7_PACKET_ID_MULTI: From 412dbad2c7e273b48e8477247c74b2ad65c452d2 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 20 May 2015 14:46:14 -0700 Subject: [PATCH 631/652] Input: vmmouse - do not reference non-existing version of X driver The vmmouse Kconfig help text was referring to an incorrect user-space driver version. Fix this. Signed-off-by: Thomas Hellstrom Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 7462d2fc8cfe..d7820d1152d2 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -156,7 +156,7 @@ config MOUSE_PS2_VMMOUSE Say Y here if you are running under control of VMware hypervisor (ESXi, Workstation or Fusion). Also make sure that when you enable this option, you remove the xf86-input-vmmouse user-space driver - or upgrade it to at least xf86-input-vmmouse 13.0.1, which doesn't + or upgrade it to at least xf86-input-vmmouse 13.1.0, which doesn't load in the presence of an in-kernel vmmouse driver. If unsure, say N. From 487696957e3bd64ccffe62c0ac4ff7bf662785ab Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 13 May 2015 09:30:08 -0700 Subject: [PATCH 632/652] raid5: fix broken async operation chain ops_run_reconstruct6() doesn't correctly chain asyn operations. The tx returned by async_gen_syndrome should be added as the dependent tx of next stripe. The issue is introduced by commit 59fc630b8b5f9f21c8ce3ba153341c107dce1b0c RAID5: batch adjacent full stripe write Reported-and-tested-by: Maxime Ripard Signed-off-by: Shaohua Li Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 1ba97fdc6df1..b9f2b9cc6060 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1822,7 +1822,7 @@ again: } else init_async_submit(&submit, 0, tx, NULL, NULL, to_addr_conv(sh, percpu, j)); - async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit); + tx = async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit); if (!last_stripe) { j++; sh = list_first_entry(&sh->batch_list, struct stripe_head, From a81157768a00e8cf8a7b43b5ea5cac931262374f Mon Sep 17 00:00:00 2001 From: Eric Work Date: Mon, 18 May 2015 23:26:23 -0700 Subject: [PATCH 633/652] md/raid0: fix restore to sector variable in raid0_make_request The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979cc968535cb87f3e5f2e6a3533ea48fbd restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by: NeilBrown Fixes: 47d68979cc96 ("md/raid0: fix bug with chunksize not a power of 2.") Cc: stable@vger.kernel.org (any that received above backport) URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501 --- drivers/md/raid0.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 6a68ef5246d4..efb654eb5399 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -524,6 +524,9 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio) ? (sector & (chunk_sects-1)) : sector_div(sector, chunk_sects)); + /* Restore due to sector_div */ + sector = bio->bi_iter.bi_sector; + if (sectors < bio_sectors(bio)) { split = bio_split(bio, sectors, GFP_NOIO, fs_bio_set); bio_chain(split, bio); @@ -531,7 +534,6 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio) split = bio; } - sector = bio->bi_iter.bi_sector; zone = find_zone(mddev->private, §or); tmp_dev = map_sector(mddev, zone, sector, §or); split->bi_bdev = tmp_dev->bdev; From 8532e3439087de69bb1b71fd6be2baa6fc196a55 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 20 May 2015 15:05:09 +1000 Subject: [PATCH 634/652] md/bitmap: remove rcu annotation from pointer arithmetic. Evaluating "&mddev->disks" is simple pointer arithmetic, so it does not need 'rcu' annotations - no dereferencing is happening. Also enhance the comment to explain that 'rdev' in that case is not actually a pointer to an rdev. Reported-by: Patrick Marlier Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 2bc56e2a3526..135a0907e9de 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -177,11 +177,16 @@ static struct md_rdev *next_active_rdev(struct md_rdev *rdev, struct mddev *mdde * nr_pending is 0 and In_sync is clear, the entries we return will * still be in the same position on the list when we re-enter * list_for_each_entry_continue_rcu. + * + * Note that if entered with 'rdev == NULL' to start at the + * beginning, we temporarily assign 'rdev' to an address which + * isn't really an rdev, but which can be used by + * list_for_each_entry_continue_rcu() to find the first entry. */ rcu_read_lock(); if (rdev == NULL) /* start at the beginning */ - rdev = list_entry_rcu(&mddev->disks, struct md_rdev, same_set); + rdev = list_entry(&mddev->disks, struct md_rdev, same_set); else { /* release the previous rdev and start from there. */ rdev_dec_pending(rdev, mddev); From 755c814a7d826257d5488cfaa801ec19377c472a Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Wed, 20 May 2015 10:57:27 -0400 Subject: [PATCH 635/652] drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova() The index of ->planes[] array (3rd parameter) cannot be equal to MAX_PLANE. This looks like a typo that is now fixed. Signed-off-by: Stephane Viau Acked-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 18a3d203b174..57b8f56ae9d0 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -273,7 +273,7 @@ static void set_scanout_locked(struct drm_plane *plane, mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC2_ADDR(pipe), msm_framebuffer_iova(fb, mdp5_kms->id, 2)); mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC3_ADDR(pipe), - msm_framebuffer_iova(fb, mdp5_kms->id, 4)); + msm_framebuffer_iova(fb, mdp5_kms->id, 3)); plane->fb = fb; } From 0f28d1281b6c54cc98746ae61e44e7f540758ed4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 18 May 2015 10:38:25 -0400 Subject: [PATCH 636/652] drm/radeon: retry dcpd fetch Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_dp.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 3e3290c203c6..b435c859dcbc 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -421,19 +421,21 @@ bool radeon_dp_getdpcd(struct radeon_connector *radeon_connector) { struct radeon_connector_atom_dig *dig_connector = radeon_connector->con_priv; u8 msg[DP_DPCD_SIZE]; - int ret; + int ret, i; - ret = drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_DPCD_REV, msg, - DP_DPCD_SIZE); - if (ret > 0) { - memcpy(dig_connector->dpcd, msg, DP_DPCD_SIZE); + for (i = 0; i < 7; i++) { + ret = drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_DPCD_REV, msg, + DP_DPCD_SIZE); + if (ret == DP_DPCD_SIZE) { + memcpy(dig_connector->dpcd, msg, DP_DPCD_SIZE); - DRM_DEBUG_KMS("DPCD: %*ph\n", (int)sizeof(dig_connector->dpcd), - dig_connector->dpcd); + DRM_DEBUG_KMS("DPCD: %*ph\n", (int)sizeof(dig_connector->dpcd), + dig_connector->dpcd); - radeon_dp_probe_oui(radeon_connector); + radeon_dp_probe_oui(radeon_connector); - return true; + return true; + } } dig_connector->dpcd[0] = 0; return false; From 6ca121351bf65f9f3375d3b0d54c2aed3b3f47ad Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 20 May 2015 17:58:49 -0400 Subject: [PATCH 637/652] drm/radeon: fix error flag checking in native aux path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit That atom table does not check these bits. Fixes aux regressions on some boards. Reported-by: Malte Schröder Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_dp_auxch.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c index bf1fecc6cceb..fcbd60bb0349 100644 --- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c +++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c @@ -30,8 +30,6 @@ AUX_SW_RX_HPD_DISCON | \ AUX_SW_RX_PARTIAL_BYTE | \ AUX_SW_NON_AUX_MODE | \ - AUX_SW_RX_MIN_COUNT_VIOL | \ - AUX_SW_RX_INVALID_STOP | \ AUX_SW_RX_SYNC_INVALID_L | \ AUX_SW_RX_SYNC_INVALID_H | \ AUX_SW_RX_INVALID_START | \ From c78e1746d3ad7d548bdf3fe491898cc453911a49 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 20 May 2015 17:13:33 +0200 Subject: [PATCH 638/652] net: sched: fix call_rcu() race on classifier module unloads Vijay reported that a loop as simple as ... while true; do tc qdisc add dev foo root handle 1: prio tc filter add dev foo parent 1: u32 match u32 0 0 flowid 1 tc qdisc del dev foo root rmmod cls_u32 done ... will panic the kernel. Moreover, he bisected the change apparently introducing it to 78fd1d0ab072 ("netlink: Re-add locking to netlink_lookup() and seq walker"). The removal of synchronize_net() from the netlink socket triggering the qdisc to be removed, seems to have uncovered an RCU resp. module reference count race from the tc API. Given that RCU conversion was done after e341694e3eb5 ("netlink: Convert netlink_lookup() to use RCU protected hash table") which added the synchronize_net() originally, occasion of hitting the bug was less likely (not impossible though): When qdiscs that i) support attaching classifiers and, ii) have at least one of them attached, get deleted, they invoke tcf_destroy_chain(), and thus call into ->destroy() handler from a classifier module. After RCU conversion, all classifier that have an internal prio list, unlink them and initiate freeing via call_rcu() deferral. Meanhile, tcf_destroy() releases already reference to the tp->ops->owner module before the queued RCU callback handler has been invoked. Subsequent rmmod on the classifier module is then not prevented since all module references are already dropped. By the time, the kernel invokes the RCU callback handler from the module, that function address is then invalid. One way to fix it would be to add an rcu_barrier() to unregister_tcf_proto_ops() to wait for all pending call_rcu()s to complete. synchronize_rcu() is not appropriate as under heavy RCU callback load, registered call_rcu()s could be deferred longer than a grace period. In case we don't have any pending call_rcu()s, the barrier is allowed to return immediately. Since we came here via unregister_tcf_proto_ops(), there are no users of a given classifier anymore. Further nested call_rcu()s pointing into the module space are not being done anywhere. Only cls_bpf_delete_prog() may schedule a work item, to unlock pages eventually, but that is not in the range/context of cls_bpf anymore. Fixes: 25d8c0d55f24 ("net: rcu-ify tcf_proto") Fixes: 9888faefe132 ("net: sched: cls_basic use RCU") Reported-by: Vijay Subramanian Signed-off-by: Daniel Borkmann Cc: John Fastabend Cc: Eric Dumazet Cc: Thomas Graf Cc: Jamal Hadi Salim Cc: Alexei Starovoitov Tested-by: Vijay Subramanian Acked-by: Alexei Starovoitov Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/cls_api.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index b6ef9a04de06..a75864d93142 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -81,6 +81,11 @@ int unregister_tcf_proto_ops(struct tcf_proto_ops *ops) struct tcf_proto_ops *t; int rc = -ENOENT; + /* Wait for outstanding call_rcu()s, if any, from a + * tcf_proto_ops's destroy() handler. + */ + rcu_barrier(); + write_lock(&cls_mod_lock); list_for_each_entry(t, &tcf_proto_base, head) { if (t == ops) { From 15397f153cfd69c2164c1fa593e26707ed1a3e72 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 20 May 2015 14:50:30 -0700 Subject: [PATCH 639/652] Input: joydev - don't classify the vmmouse as a joystick Joydev is currently thinking some absolute mice are joystick, and that messes up games in VMware guests, as the cursor typically gets stuck in the top left corner. Try to detect the event signature of a VMmouse input device and back off for such devices. We're still incorrectly detecting, for example, the VMware absolute USB mouse as a joystick, but adding an event signature matching also that device would be considerably more risky, so defer that to a later merge window. Signed-off-by: Thomas Hellstrom Signed-off-by: Dmitry Torokhov --- drivers/input/joydev.c | 61 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index f362883c94e3..1d247bcf2ae2 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -747,6 +747,63 @@ static void joydev_cleanup(struct joydev *joydev) input_close_device(handle); } +static bool joydev_dev_is_absolute_mouse(struct input_dev *dev) +{ + DECLARE_BITMAP(jd_scratch, KEY_CNT); + + BUILD_BUG_ON(ABS_CNT > KEY_CNT || EV_CNT > KEY_CNT); + + /* + * Virtualization (VMware, etc) and remote management (HP + * ILO2) solutions use absolute coordinates for their virtual + * pointing devices so that there is one-to-one relationship + * between pointer position on the host screen and virtual + * guest screen, and so their mice use ABS_X, ABS_Y and 3 + * primary button events. This clashes with what joydev + * considers to be joysticks (a device with at minimum ABS_X + * axis). + * + * Here we are trying to separate absolute mice from + * joysticks. A device is, for joystick detection purposes, + * considered to be an absolute mouse if the following is + * true: + * + * 1) Event types are exactly EV_ABS, EV_KEY and EV_SYN. + * 2) Absolute events are exactly ABS_X and ABS_Y. + * 3) Keys are exactly BTN_LEFT, BTN_RIGHT and BTN_MIDDLE. + * 4) Device is not on "Amiga" bus. + */ + + bitmap_zero(jd_scratch, EV_CNT); + __set_bit(EV_ABS, jd_scratch); + __set_bit(EV_KEY, jd_scratch); + __set_bit(EV_SYN, jd_scratch); + if (!bitmap_equal(jd_scratch, dev->evbit, EV_CNT)) + return false; + + bitmap_zero(jd_scratch, ABS_CNT); + __set_bit(ABS_X, jd_scratch); + __set_bit(ABS_Y, jd_scratch); + if (!bitmap_equal(dev->absbit, jd_scratch, ABS_CNT)) + return false; + + bitmap_zero(jd_scratch, KEY_CNT); + __set_bit(BTN_LEFT, jd_scratch); + __set_bit(BTN_RIGHT, jd_scratch); + __set_bit(BTN_MIDDLE, jd_scratch); + + if (!bitmap_equal(dev->keybit, jd_scratch, KEY_CNT)) + return false; + + /* + * Amiga joystick (amijoy) historically uses left/middle/right + * button events. + */ + if (dev->id.bustype == BUS_AMIGA) + return false; + + return true; +} static bool joydev_match(struct input_handler *handler, struct input_dev *dev) { @@ -758,6 +815,10 @@ static bool joydev_match(struct input_handler *handler, struct input_dev *dev) if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit)) return false; + /* Avoid absolute mice */ + if (joydev_dev_is_absolute_mouse(dev)) + return false; + return true; } From e686e9e156109cd2475196689a3144d91cf354b3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 7 May 2015 22:24:58 -0700 Subject: [PATCH 640/652] Input: smtpe-ts - use msecs_to_jiffies() instead of HZ Use msecs_to_jiffies(20) instead of plain (HZ / 50), as the former is much more explicit about it's behavior. We want to schedule the task 20 mS from now, so make it explicit in the code. Signed-off-by: Marek Vasut Reviewed-by: Viresh Kumar Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/stmpe-ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 2d5ff86b343f..702ad200d916 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -164,7 +164,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); /* start polling for touch_det to detect release */ - schedule_delayed_work(&ts->work, HZ / 50); + schedule_delayed_work(&ts->work, msecs_to_jiffies(20)); return IRQ_HANDLED; } From 77b071e7931dd762563ac74e3e448b2aef23ad2f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 7 May 2015 22:25:49 -0700 Subject: [PATCH 641/652] Input: smtpe-ts - wait 50mS until polling for pen-up Wait a little bit longer, 50mS instead of 20mS, until the driver starts polling for pen-up. The problematic behavior before this patch is applied is as follows. The behavior was observed on the STMPE610QTR controller. Upon a physical pen-down event, the touchscreen reports one set of x-y-p coordinates and a pen-down event. After that, the pen-up polling is triggered and since the controller is not ready yet, the polling mistakenly detects a pen-up event while the physical state is still such that the pen is down on the touch surface. The pen-up handling flushes the controller FIFO, so after that, all the samples in the controller are discarded. The controller becomes ready shortly after this bogus pen-up handling and does generate again a pen-down interrupt. This time, the controller contains x-y-p samples which all read as zero. Since pressure value is zero, this set of samples is effectively ignored by userland. In the end, the driver just bounces between pen-down and bogus pen-up handling, generating no useful results. Fix this by giving the controller a bit more time before polling it for pen-up. Signed-off-by: Marek Vasut Reviewed-by: Viresh Kumar Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/stmpe-ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 702ad200d916..e4c31256a74d 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -164,7 +164,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); /* start polling for touch_det to detect release */ - schedule_delayed_work(&ts->work, msecs_to_jiffies(20)); + schedule_delayed_work(&ts->work, msecs_to_jiffies(50)); return IRQ_HANDLED; } From a1cae34e23b1293eccbcc8ee9b39298039c3952a Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Thu, 21 May 2015 10:01:11 +0200 Subject: [PATCH 642/652] crypto: s390/ghash - Fix incorrect ghash icv buffer handling. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Cc: stable@vger.kernel.org Signed-off-by: Harald Freudenberger Signed-off-by: Gerald Schaefer Reported-by: Herbert Xu Signed-off-by: Herbert Xu --- arch/s390/crypto/ghash_s390.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/s390/crypto/ghash_s390.c b/arch/s390/crypto/ghash_s390.c index 7940dc90e80b..b258110da952 100644 --- a/arch/s390/crypto/ghash_s390.c +++ b/arch/s390/crypto/ghash_s390.c @@ -16,11 +16,12 @@ #define GHASH_DIGEST_SIZE 16 struct ghash_ctx { - u8 icv[16]; - u8 key[16]; + u8 key[GHASH_BLOCK_SIZE]; }; struct ghash_desc_ctx { + u8 icv[GHASH_BLOCK_SIZE]; + u8 key[GHASH_BLOCK_SIZE]; u8 buffer[GHASH_BLOCK_SIZE]; u32 bytes; }; @@ -28,8 +29,10 @@ struct ghash_desc_ctx { static int ghash_init(struct shash_desc *desc) { struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); + struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); memset(dctx, 0, sizeof(*dctx)); + memcpy(dctx->key, ctx->key, GHASH_BLOCK_SIZE); return 0; } @@ -45,7 +48,6 @@ static int ghash_setkey(struct crypto_shash *tfm, } memcpy(ctx->key, key, GHASH_BLOCK_SIZE); - memset(ctx->icv, 0, GHASH_BLOCK_SIZE); return 0; } @@ -54,7 +56,6 @@ static int ghash_update(struct shash_desc *desc, const u8 *src, unsigned int srclen) { struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); - struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); unsigned int n; u8 *buf = dctx->buffer; int ret; @@ -70,7 +71,7 @@ static int ghash_update(struct shash_desc *desc, src += n; if (!dctx->bytes) { - ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf, + ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE); if (ret != GHASH_BLOCK_SIZE) return -EIO; @@ -79,7 +80,7 @@ static int ghash_update(struct shash_desc *desc, n = srclen & ~(GHASH_BLOCK_SIZE - 1); if (n) { - ret = crypt_s390_kimd(KIMD_GHASH, ctx, src, n); + ret = crypt_s390_kimd(KIMD_GHASH, dctx, src, n); if (ret != n) return -EIO; src += n; @@ -94,7 +95,7 @@ static int ghash_update(struct shash_desc *desc, return 0; } -static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx) +static int ghash_flush(struct ghash_desc_ctx *dctx) { u8 *buf = dctx->buffer; int ret; @@ -104,24 +105,24 @@ static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx) memset(pos, 0, dctx->bytes); - ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf, GHASH_BLOCK_SIZE); + ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE); if (ret != GHASH_BLOCK_SIZE) return -EIO; + + dctx->bytes = 0; } - dctx->bytes = 0; return 0; } static int ghash_final(struct shash_desc *desc, u8 *dst) { struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); - struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); int ret; - ret = ghash_flush(ctx, dctx); + ret = ghash_flush(dctx); if (!ret) - memcpy(dst, ctx->icv, GHASH_BLOCK_SIZE); + memcpy(dst, dctx->icv, GHASH_BLOCK_SIZE); return ret; } From d654976cbf852ee20612ee10dbe57cdacda9f452 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 21 May 2015 21:51:19 -0700 Subject: [PATCH 643/652] tcp: fix a potential deadlock in tcp_get_info() Taking socket spinlock in tcp_get_info() can deadlock, as inet_diag_dump_icsk() holds the &hashinfo->ehash_locks[i], while packet processing can use the reverse locking order. We could avoid this locking for TCP_LISTEN states, but lockdep would certainly get confused as all TCP sockets share same lockdep classes. [ 523.722504] ====================================================== [ 523.728706] [ INFO: possible circular locking dependency detected ] [ 523.734990] 4.1.0-dbg-DEV #1676 Not tainted [ 523.739202] ------------------------------------------------------- [ 523.745474] ss/18032 is trying to acquire lock: [ 523.750002] (slock-AF_INET){+.-...}, at: [] tcp_get_info+0x2c4/0x360 [ 523.758129] [ 523.758129] but task is already holding lock: [ 523.763968] (&(&hashinfo->ehash_locks[i])->rlock){+.-...}, at: [] inet_diag_dump_icsk+0x1d5/0x6c0 [ 523.774661] [ 523.774661] which lock already depends on the new lock. [ 523.774661] [ 523.782850] [ 523.782850] the existing dependency chain (in reverse order) is: [ 523.790326] -> #1 (&(&hashinfo->ehash_locks[i])->rlock){+.-...}: [ 523.796599] [] lock_acquire+0xbb/0x270 [ 523.802565] [] _raw_spin_lock+0x38/0x50 [ 523.808628] [] __inet_hash_nolisten+0x78/0x110 [ 523.815273] [] tcp_v4_syn_recv_sock+0x24b/0x350 [ 523.822067] [] tcp_check_req+0x3c1/0x500 [ 523.828199] [] tcp_v4_do_rcv+0x239/0x3d0 [ 523.834331] [] tcp_v4_rcv+0xa8e/0xc10 [ 523.840202] [] ip_local_deliver_finish+0x133/0x3e0 [ 523.847214] [] ip_local_deliver+0xaa/0xc0 [ 523.853440] [] ip_rcv_finish+0x168/0x5c0 [ 523.859624] [] ip_rcv+0x307/0x420 Lets use u64_sync infrastructure instead. As a bonus, 64bit arches get optimized, as these are nop for them. Fixes: 0df48c26d841 ("tcp: add tcpi_bytes_acked to tcp_info") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/tcp.h | 2 ++ net/ipv4/tcp.c | 11 +++++++---- net/ipv4/tcp_fastopen.c | 4 ++++ net/ipv4/tcp_input.c | 4 ++++ 4 files changed, 17 insertions(+), 4 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 3b2911502a8c..e8bbf403618f 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -158,6 +158,8 @@ struct tcp_sock { * sum(delta(snd_una)), or how many bytes * were acked. */ + struct u64_stats_sync syncp; /* protects 64bit vars (cf tcp_get_info()) */ + u32 snd_una; /* First byte we want an ack for */ u32 snd_sml; /* Last byte of the most recently transmitted small packet */ u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 46efa03d2b11..f1377f2a0472 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -402,6 +402,7 @@ void tcp_init_sock(struct sock *sk) tp->snd_ssthresh = TCP_INFINITE_SSTHRESH; tp->snd_cwnd_clamp = ~0; tp->mss_cache = TCP_MSS_DEFAULT; + u64_stats_init(&tp->syncp); tp->reordering = sysctl_tcp_reordering; tcp_enable_early_retrans(tp); @@ -2598,6 +2599,7 @@ void tcp_get_info(struct sock *sk, struct tcp_info *info) const struct tcp_sock *tp = tcp_sk(sk); const struct inet_connection_sock *icsk = inet_csk(sk); u32 now = tcp_time_stamp; + unsigned int start; u32 rate; memset(info, 0, sizeof(*info)); @@ -2665,10 +2667,11 @@ void tcp_get_info(struct sock *sk, struct tcp_info *info) rate = READ_ONCE(sk->sk_max_pacing_rate); info->tcpi_max_pacing_rate = rate != ~0U ? rate : ~0ULL; - spin_lock_bh(&sk->sk_lock.slock); - info->tcpi_bytes_acked = tp->bytes_acked; - info->tcpi_bytes_received = tp->bytes_received; - spin_unlock_bh(&sk->sk_lock.slock); + do { + start = u64_stats_fetch_begin_irq(&tp->syncp); + info->tcpi_bytes_acked = tp->bytes_acked; + info->tcpi_bytes_received = tp->bytes_received; + } while (u64_stats_fetch_retry_irq(&tp->syncp, start)); } EXPORT_SYMBOL_GPL(tcp_get_info); diff --git a/net/ipv4/tcp_fastopen.c b/net/ipv4/tcp_fastopen.c index 3c673d5e6cff..46b087a27503 100644 --- a/net/ipv4/tcp_fastopen.c +++ b/net/ipv4/tcp_fastopen.c @@ -206,6 +206,10 @@ static bool tcp_fastopen_create_child(struct sock *sk, skb_set_owner_r(skb2, child); __skb_queue_tail(&child->sk_receive_queue, skb2); tp->syn_data_acked = 1; + + /* u64_stats_update_begin(&tp->syncp) not needed here, + * as we certainly are not changing upper 32bit value (0) + */ tp->bytes_received = end_seq - TCP_SKB_CB(skb)->seq - 1; } else { end_seq = TCP_SKB_CB(skb)->seq + 1; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 243d674b3ef5..c9ab964189a0 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3286,7 +3286,9 @@ static void tcp_snd_una_update(struct tcp_sock *tp, u32 ack) { u32 delta = ack - tp->snd_una; + u64_stats_update_begin(&tp->syncp); tp->bytes_acked += delta; + u64_stats_update_end(&tp->syncp); tp->snd_una = ack; } @@ -3295,7 +3297,9 @@ static void tcp_rcv_nxt_update(struct tcp_sock *tp, u32 seq) { u32 delta = seq - tp->rcv_nxt; + u64_stats_update_begin(&tp->syncp); tp->bytes_received += delta; + u64_stats_update_end(&tp->syncp); tp->rcv_nxt = seq; } From 381c759d9916c42959515ad34a6d467e24a88e93 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 22 May 2015 04:58:12 -0500 Subject: [PATCH 644/652] ipv4: Avoid crashing in ip_error ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by: Vittorio Gambaletta Tested-by: Vittorio Gambaletta Signed-off-by: Vittorio Gambaletta Signed-off-by: "Eric W. Biederman" Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index bff62fc87b8e..f45f2a12f37b 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -902,6 +902,10 @@ static int ip_error(struct sk_buff *skb) bool send; int code; + /* IP on this device is disabled. */ + if (!in_dev) + goto out; + net = dev_net(rt->dst.dev); if (!IN_DEV_FORWARD(in_dev)) { switch (rt->dst.error) { From 44f6731d8b68fa02f5ed65eaceac41f8c3c9279e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 22 May 2015 13:15:22 +0200 Subject: [PATCH 645/652] cdc_ncm: Fix tx_bytes statistics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings Reported-by: Florian Bruhin Fixes: 7a1e890e2168 ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index c3e4da9e79ca..8067b8fbb0ee 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1182,7 +1182,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) * payload data instead. */ usbnet_set_skb_tx_stats(skb_out, n, - ctx->tx_curr_frame_payload - skb_out->len); + (long)ctx->tx_curr_frame_payload - skb_out->len); return skb_out; From d4e64c2909231222ceba0999d921e7ac8908f656 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Fri, 22 May 2015 13:40:09 +0200 Subject: [PATCH 646/652] ipv4: fill in table id when replacing a route When replacing an IPv4 route, tb_id member of the new fib_alias structure is not set in the replace code path so that the new route is ignored. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Michal Kubecek Acked-by: Alexander Duyck Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 64c2076ced54..09b62e17dd8c 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1164,6 +1164,7 @@ int fib_table_insert(struct fib_table *tb, struct fib_config *cfg) state = fa->fa_state; new_fa->fa_state = state & ~FA_S_ACCESSED; new_fa->fa_slen = fa->fa_slen; + new_fa->tb_id = tb->tb_id; err = netdev_switch_fib_ipv4_add(key, plen, fi, new_fa->fa_tos, From 6db99596d11a99f59e8f8f9353b22ef76e31ad6a Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Fri, 22 May 2015 09:22:09 -0500 Subject: [PATCH 647/652] net: macb: Document zynq gem dt binding Signed-off-by: Nathan Sullivan Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cdns-emac.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt index abd67c13d344..4451ee973223 100644 --- a/Documentation/devicetree/bindings/net/cdns-emac.txt +++ b/Documentation/devicetree/bindings/net/cdns-emac.txt @@ -3,7 +3,8 @@ Required properties: - compatible: Should be "cdns,[-]{emac}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - or the generic form: "cdns,emac". + Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. + Or the generic form: "cdns,emac". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: see ethernet.txt file in the same directory. From 222ca8e0c183309081bdb0fd5827fc2a922be3ad Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Fri, 22 May 2015 09:22:10 -0500 Subject: [PATCH 648/652] net: macb: Disable half duplex gigabit on Zynq According to the Zynq TRM, gigabit half duplex is not supported. Add a new cap and compatible string so Zynq can avoid advertising that mode. Signed-off-by: Nathan Sullivan Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 12 ++++++++++++ drivers/net/ethernet/cadence/macb.h | 1 + 2 files changed, 13 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 5f10dfc631d7..fc646a41d548 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -350,6 +350,9 @@ static int macb_mii_probe(struct net_device *dev) else phydev->supported &= PHY_BASIC_FEATURES; + if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF) + phydev->supported &= ~SUPPORTED_1000baseT_Half; + phydev->advertising = phydev->supported; bp->link = 0; @@ -2699,6 +2702,14 @@ static const struct macb_config emac_config = { .init = at91ether_init, }; +static const struct macb_config zynq_config = { + .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE | + MACB_CAPS_NO_GIGABIT_HALF, + .dma_burst_length = 16, + .clk_init = macb_clk_init, + .init = macb_init, +}; + static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,at32ap7000-macb" }, { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config }, @@ -2709,6 +2720,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config }, { .compatible = "cdns,at91rm9200-emac", .data = &emac_config }, { .compatible = "cdns,emac", .data = &emac_config }, + { .compatible = "cdns,zynq-gem", .data = &zynq_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, macb_dt_ids); diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index eb7d76f7bf6a..24b1d9bcd865 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -393,6 +393,7 @@ #define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001 #define MACB_CAPS_USRIO_HAS_CLKEN 0x00000002 #define MACB_CAPS_USRIO_DEFAULT_IS_MII 0x00000004 +#define MACB_CAPS_NO_GIGABIT_HALF 0x00000008 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000 From 9eeb5161397a54580a630c99841b5badb07cf246 Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Fri, 22 May 2015 09:22:11 -0500 Subject: [PATCH 649/652] ARM: zynq: DT: Use the zynq binding with macb Use the new zynq binding for macb ethernet, since it will disable half duplex gigabit like the Zynq TRM says to do. Signed-off-by: Nathan Sullivan Signed-off-by: David S. Miller --- arch/arm/boot/dts/zynq-7000.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index a5cd2eda3edf..9ea54b3dba09 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -193,7 +193,7 @@ }; gem0: ethernet@e000b000 { - compatible = "cdns,gem"; + compatible = "cdns,zynq-gem"; reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; @@ -204,7 +204,7 @@ }; gem1: ethernet@e000c000 { - compatible = "cdns,gem"; + compatible = "cdns,zynq-gem"; reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; From 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Fri, 22 May 2015 12:18:59 -0300 Subject: [PATCH 650/652] bridge: fix parsing of MLDv2 reports When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.") Reported-by: Rik Theys Signed-off-by: Thadeu Lima de Souza Cascardo Tested-by: Rik Theys Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 4b6722f8f179..a3abe6ed111e 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1072,7 +1072,7 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br, err = br_ip6_multicast_add_group(br, port, &grec->grec_mca, vid); - if (!err) + if (err) break; } From f96dee13b8e10f00840124255bed1d8b4c6afd6f Mon Sep 17 00:00:00 2001 From: Arun Parameswaran Date: Wed, 20 May 2015 14:35:30 -0700 Subject: [PATCH 651/652] net: core: 'ethtool' issue with querying phy settings When trying to configure the settings for PHY1, using commands like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to modify other settings apart from the speed of the PHY1, in the above case. The ethtool seems to query the settings for PHY0, and use this as the base to apply the new settings to the PHY1. This is causing the other settings of the PHY 1 to be wrongly configured. The issue is caused by the '_ethtool_get_settings()' API, which gets called because of the 'ETHTOOL_GSET' command, is clearing the 'cmd' pointer (of type 'struct ethtool_cmd') by calling memset. This clears all the parameters (if any) passed for the 'ETHTOOL_GSET' cmd. So the driver's callback is always invoked with 'cmd->phy_address' as '0'. The '_ethtool_get_settings()' is called from other files in the 'net/core'. So the fix is applied to the 'ethtool_get_settings()' which is only called in the context of the 'ethtool'. Signed-off-by: Arun Parameswaran Reviewed-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: David S. Miller --- net/core/ethtool.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 1d00b8922902..1347e11f5cc9 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -359,7 +359,15 @@ static int ethtool_get_settings(struct net_device *dev, void __user *useraddr) int err; struct ethtool_cmd cmd; - err = __ethtool_get_settings(dev, &cmd); + if (!dev->ethtool_ops->get_settings) + return -EOPNOTSUPP; + + if (copy_from_user(&cmd, useraddr, sizeof(cmd))) + return -EFAULT; + + cmd.cmd = ETHTOOL_GSET; + + err = dev->ethtool_ops->get_settings(dev, &cmd); if (err < 0) return err; From 93a33a584e2a49a217118148125944fd02d47b54 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 21 May 2015 13:28:29 -0700 Subject: [PATCH 652/652] bridge: fix lockdep splat Following lockdep splat was reported : [ 29.382286] =============================== [ 29.382315] [ INFO: suspicious RCU usage. ] [ 29.382344] 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 Not tainted [ 29.382380] ------------------------------- [ 29.382409] net/bridge/br_private.h:626 suspicious rcu_dereference_check() usage! [ 29.382455] other info that might help us debug this: [ 29.382507] rcu_scheduler_active = 1, debug_locks = 0 [ 29.382549] 2 locks held by swapper/0/0: [ 29.382576] #0: (((&p->forward_delay_timer))){+.-...}, at: [] call_timer_fn+0x5/0x4f0 [ 29.382660] #1: (&(&br->lock)->rlock){+.-...}, at: [] br_forward_delay_timer_expired+0x31/0x140 [bridge] [ 29.382754] stack backtrace: [ 29.382787] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 [ 29.382838] Hardware name: LENOVO 422916G/LENOVO, BIOS A1KT53AUS 04/07/2015 [ 29.382882] 0000000000000000 3ebfc20364115825 ffff880666603c48 ffffffff81892d4b [ 29.382943] 0000000000000000 ffffffff81e124e0 ffff880666603c78 ffffffff8110bcd7 [ 29.383004] ffff8800785c9d00 ffff88065485ac58 ffff880c62002800 ffff880c5fc88ac0 [ 29.383065] Call Trace: [ 29.383084] [] dump_stack+0x4c/0x65 [ 29.383130] [] lockdep_rcu_suspicious+0xe7/0x120 [ 29.383178] [] br_fill_ifinfo+0x4a9/0x6a0 [bridge] [ 29.383225] [] br_ifinfo_notify+0x11b/0x4b0 [bridge] [ 29.383271] [] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383320] [] br_forward_delay_timer_expired+0x58/0x140 [bridge] [ 29.383371] [] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383416] [] call_timer_fn+0xc3/0x4f0 [ 29.383454] [] ? call_timer_fn+0x5/0x4f0 [ 29.383493] [] ? lock_release_holdtime.part.29+0xf/0x200 [ 29.383541] [] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383587] [] run_timer_softirq+0x244/0x490 [ 29.383629] [] __do_softirq+0xec/0x670 [ 29.383666] [] irq_exit+0x145/0x150 [ 29.383703] [] smp_apic_timer_interrupt+0x46/0x60 [ 29.383744] [] apic_timer_interrupt+0x73/0x80 [ 29.383782] [] ? cpuidle_enter_state+0x5f/0x2f0 [ 29.383832] [] ? cpuidle_enter_state+0x5b/0x2f0 Problem here is that br_forward_delay_timer_expired() is a timer handler, calling br_ifinfo_notify() which assumes either rcu_read_lock() or RTNL are held. Simplest fix seems to add rcu read lock section. Signed-off-by: Eric Dumazet Reported-by: Josh Boyer Reported-by: Dominick Grift Cc: Vlad Yasevich Signed-off-by: David S. Miller --- net/bridge/br_stp_timer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bridge/br_stp_timer.c b/net/bridge/br_stp_timer.c index 4fcaa67750fd..7caf7fae2d5b 100644 --- a/net/bridge/br_stp_timer.c +++ b/net/bridge/br_stp_timer.c @@ -97,7 +97,9 @@ static void br_forward_delay_timer_expired(unsigned long arg) netif_carrier_on(br->dev); } br_log_state(p); + rcu_read_lock(); br_ifinfo_notify(RTM_NEWLINK, p); + rcu_read_unlock(); spin_unlock(&br->lock); }