arm/imx6q: add core drivers clock, gpc, mmdc and src

It adds a number of core drivers support for imx6q, including clock,
General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
System Reset Controller (src).

Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Shawn Guo 2011-09-06 14:39:44 +08:00 committed by Arnd Bergmann
parent 1103643c26
commit 9fbbe6890c
6 changed files with 2263 additions and 0 deletions

View File

@ -1,5 +1,15 @@
config IMX_HAVE_DMA_V1
bool
config HAVE_IMX_GPC
bool
config HAVE_IMX_MMDC
bool
config HAVE_IMX_SRC
bool
#
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
@ -601,6 +611,9 @@ config SOC_IMX6Q
select ARM_GIC
select CACHE_L2X0
select CPU_V7
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select USE_OF
help

View File

@ -62,3 +62,7 @@ obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o

File diff suppressed because it is too large Load Diff

113
arch/arm/mach-imx/gpc.c Normal file
View File

@ -0,0 +1,113 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/hardware/gic.h>
#define GPC_IMR1 0x008
#define GPC_PGC_CPU_PDN 0x2a0
#define IMR_NUM 4
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
void imx_gpc_pre_suspend(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Tell GPC to power off ARM core when suspend */
writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
}
}
void imx_gpc_post_resume(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Keep ARM core powered on for other low-power modes */
writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
{
unsigned int idx = d->irq / 32 - 1;
u32 mask;
/* Sanity check for SPI irq */
if (d->irq < 32)
return -EINVAL;
mask = 1 << d->irq % 32;
gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
gpc_wake_irqs[idx] & ~mask;
return 0;
}
static void imx_gpc_irq_unmask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
/* Sanity check for SPI irq */
if (d->irq < 32)
return;
reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
val = readl_relaxed(reg);
val &= ~(1 << d->irq % 32);
writel_relaxed(val, reg);
}
static void imx_gpc_irq_mask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
/* Sanity check for SPI irq */
if (d->irq < 32)
return;
reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
val = readl_relaxed(reg);
val |= 1 << (d->irq % 32);
writel_relaxed(val, reg);
}
void __init imx_gpc_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
gpc_base = of_iomap(np, 0);
WARN_ON(!gpc_base);
/* Register GPC as the secondary interrupt controller behind GIC */
gic_arch_extn.irq_mask = imx_gpc_irq_mask;
gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
}

72
arch/arm/mach-imx/mmdc.c Normal file
View File

@ -0,0 +1,72 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#define MMDC_MAPSR 0x404
#define BP_MMDC_MAPSR_PSD 0
#define BP_MMDC_MAPSR_PSS 4
static int __devinit imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
void __iomem *mmdc_base, *reg;
u32 val;
int timeout = 0x400;
mmdc_base = of_iomap(np, 0);
WARN_ON(!mmdc_base);
reg = mmdc_base + MMDC_MAPSR;
/* Enable automatic power saving */
val = readl_relaxed(reg);
val &= ~(1 << BP_MMDC_MAPSR_PSD);
writel_relaxed(val, reg);
/* Ensure it's successfully enabled */
while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
cpu_relax();
if (unlikely(!timeout)) {
pr_warn("%s: failed to enable automatic power saving\n",
__func__);
return -EBUSY;
}
return 0;
}
static struct of_device_id imx_mmdc_dt_ids[] = {
{ .compatible = "fsl,imx6q-mmdc", },
{ /* sentinel */ }
};
static struct platform_driver imx_mmdc_driver = {
.driver = {
.name = "imx-mmdc",
.owner = THIS_MODULE,
.of_match_table = imx_mmdc_dt_ids,
},
.probe = imx_mmdc_probe,
};
static int __init imx_mmdc_init(void)
{
return platform_driver_register(&imx_mmdc_driver);
}
postcore_initcall(imx_mmdc_init);

49
arch/arm/mach-imx/src.c Normal file
View File

@ -0,0 +1,49 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/unified.h>
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
#define BP_SRC_SCR_CORE1_RST 14
#define BP_SRC_SCR_CORE1_ENABLE 22
static void __iomem *src_base;
void imx_enable_cpu(int cpu, bool enable)
{
u32 mask, val;
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
writel_relaxed(val, src_base + SRC_SCR);
}
void imx_set_cpu_jump(int cpu, void *jump_addr)
{
writel_relaxed(BSYM(virt_to_phys(jump_addr)),
src_base + SRC_GPR1 + cpu * 8);
}
void __init imx_src_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
}