Merge branch 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

* 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes
  ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers
  ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
  ARM: OMAP2+: Move most of plat/io.h into local iomap.h
  ARM: OMAP1: Move most of plat/io.h into local iomap.h
  ARM: OMAP1: Move 16xx GPIO system clock to platform init code
  ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h
  ARM: OMAP2+: Move SDRC related functions from io.h into local common.h
  ARM: OMAP2+: Drop DISPC L3 firewall code
  ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path
  ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config

(update to latest rmk/for-arm-soc branch)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2012-02-29 21:17:30 +00:00
commit a26d3c4fcd
162 changed files with 486 additions and 876 deletions

View File

@ -186,6 +186,9 @@ config GENERIC_ISA_DMA
config FIQ
bool
config NEED_RET_TO_USER
bool
config ARCH_MTD_XIP
bool
@ -479,6 +482,7 @@ config ARCH_IOP13XX
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
help
Support for Intel's IOP13XX (XScale) family of processors.
@ -486,6 +490,7 @@ config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB
@ -497,6 +502,7 @@ config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB

View File

@ -11,14 +11,6 @@
/* IOC / IOMD based hardware */
#include <asm/hardware/iomd.h>
.macro disable_fiq
mov r12, #ioc_base_high
.if ioc_base_low
orr r12, r12, #ioc_base_low
.endif
strb r12, [r12, #0x38] @ Disable FIQ register
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first
ldr \tmp, =irq_prio_h

View File

@ -19,7 +19,9 @@
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
#ifndef CONFIG_MULTI_IRQ_HANDLER
#include <mach/entry-macro.S>
#endif
#include <asm/thread_notify.h>
#include <asm/unwind.h>
#include <asm/unistd.h>
@ -1101,7 +1103,6 @@ __stubs_start:
* get out of that mode without clobbering one register.
*/
vector_fiq:
disable_fiq
subs pc, lr, #4
/*=============================================================================

View File

@ -10,9 +10,15 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <mach/entry-macro.S>
#include <asm/unwind.h>
#ifdef CONFIG_NEED_RET_TO_USER
#include <mach/entry-macro.S>
#else
.macro arch_ret_to_user, tmp1, tmp2
.endm
#endif
#include "entry-header.S"

View File

@ -13,17 +13,11 @@
#include <mach/hardware.h>
#include <mach/at91_aic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =at91_aic_base @ base virtual address of AIC peripheral
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number

View File

@ -21,9 +21,6 @@
#include <mach/hardware.h>
#include <mach/csp/mm_io.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =(MM_IO_BASE_INTC0)
ldr \irqstat, [\base, #0] @ get status
@ -77,6 +74,3 @@
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -10,15 +10,9 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
#error INTSR stride != INTMR stride
#endif

View File

@ -1,15 +0,0 @@
/*
* Low-level IRQ helper macros for Cavium Networks platforms
*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -11,17 +11,11 @@
#include <mach/io.h>
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =davinci_intc_base
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
ldr \tmp, =davinci_intc_type

View File

@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm

View File

@ -12,16 +12,10 @@
#define IRQ_STAT 0xff000000 /* read */
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #IRQ_STAT
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, stat, base, tmp
ldrb \stat, [\base] @ get interrupts
mov \irqnr, #0

View File

@ -1,17 +0,0 @@
/*
* arch/arm/mach-ep93xx/include/mach/entry-macro.S
* IRQ demultiplexing for EP93xx
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -1,16 +0,0 @@
/* arch/arm/mach-exynos4/include/mach/entry-macro.S
*
* Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for EXYNOS4 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -14,9 +14,6 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #dc21285_high
.if dc21285_low
@ -24,9 +21,6 @@
.endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #0x180] @ get interrupts

View File

@ -12,15 +12,9 @@
#define IRQ_STATUS 0x14
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
ldr \irqnr, [\irqstat]

View File

@ -8,15 +8,9 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
@ we could use the id register on H7202, but this is not

View File

@ -1,5 +0,0 @@
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -11,15 +11,9 @@
#include <mach/platform.h>
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* FIXME: should not be using soo many LDRs here */
ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)

View File

@ -16,9 +16,6 @@
* Place - Suite 330, Boston, MA 02111-1307 USA.
*
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)

View File

@ -9,9 +9,6 @@
*/
#include <mach/iop32x.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)

View File

@ -9,9 +9,6 @@
*/
#include <mach/iop33x.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)

View File

@ -9,15 +9,9 @@
*/
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0x0 @clear out irqnr as default

View File

@ -2,15 +2,9 @@
* arch/arm/mach-ixp23xx/include/mach/entry-macro.S
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
ldr \irqnr, [\irqnr] @ get interrupt number

View File

@ -9,15 +9,9 @@
*/
#include <mach/hardware.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
ldr \irqstat, [\irqstat] @ get interrupts

View File

@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm

View File

@ -14,16 +14,10 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register

View File

@ -21,16 +21,10 @@
#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* Return IRQ number in irqnr. Also return processor Z flag status in CPSR
* as set if an interrupt is pending.

View File

@ -8,12 +8,6 @@
#include <mach/regs-icu.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
and \tmp, \tmp, #0xff00

View File

@ -16,12 +16,6 @@
*
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#if !defined(CONFIG_ARM_GIC)
#include <mach/msm_iomap.h>

View File

@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm

View File

@ -23,9 +23,6 @@
#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
#define HW_ICOLL_STAT_OFFSET 0x70
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
cmp \irqnr, #0x7F
@ -36,6 +33,3 @@
.macro get_irqnr_preamble, base, tmp
ldr \base, =MXS_ICOLL_VBASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -1,26 +0,0 @@
/*
* arch/arm/mach-netx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Hilscher netX based platforms
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -1,13 +0,0 @@
/*
* Low-level IRQ helper macros for Nomadik platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

View File

@ -15,11 +15,12 @@
#include <linux/linkage.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
/*
* GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
* Unfortunately, those were not placed in a separate header file.

View File

@ -22,6 +22,7 @@
#include <plat/board-ams-delta.h>
#include <asm/fiq.h>
#include <mach/ams-delta-fiq.h>
static struct fiq_handler fh = {

View File

@ -20,25 +20,27 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
#include <linux/io.h>
#include <media/soc_camera.h>
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include "common.h"
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <mach/camera.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
#include "common.h"
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;

View File

@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -32,9 +31,13 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/board.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
/* fsample is pretty close to p2-sample */
#define fsample_cpld_read(reg) __raw_readb(reg)

View File

@ -31,8 +31,6 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -43,9 +41,11 @@
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/flash.h>
#include <mach/hardware.h>
#include "common.h"
#include "board-h2.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */

View File

@ -33,21 +33,21 @@
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
#include "common.h"
#include <plat/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "common.h"
#include "board-h3.h"
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */

View File

@ -27,7 +27,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
@ -41,7 +41,6 @@
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
#include "common.h"
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
@ -49,7 +48,7 @@
#include <mach/irqs.h>
#include <linux/delay.h>
#include "common.h"
/* LCD register definition */
#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00)

View File

@ -26,7 +26,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -37,9 +36,13 @@
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/mmc.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300

View File

@ -21,7 +21,6 @@
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -30,12 +29,15 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <mach/hardware.h>
#include "common.h"
#define ADS7846_PENDOWN_GPIO 15
static const unsigned int nokia770_keymap[] = {

View File

@ -34,15 +34,11 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c/tps65010.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -51,6 +47,9 @@
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */

View File

@ -28,7 +28,6 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -41,6 +40,9 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMTE_USBDETECT_GPIO 0

View File

@ -24,8 +24,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -39,10 +40,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1

View File

@ -27,8 +27,9 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -41,10 +42,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6

View File

@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -32,9 +31,13 @@
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/board.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(1, 0, KEY_RIGHT),

View File

@ -28,7 +28,6 @@
#include <linux/errno.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -40,10 +39,13 @@
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
#include "common.h"
#include <plat/keypad.h>
#include <plat/board-sx1.h>
#include <mach/hardware.h>
#include "common.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
{

View File

@ -27,18 +27,20 @@
#include <linux/smc91x.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board-voiceblue.h>
#include "common.h"
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <mach/hardware.h>
#include "common.h"
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),

View File

@ -15,8 +15,8 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <asm/mach-types.h>
@ -27,6 +27,9 @@
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "clock.h"
#include "opp.h"

View File

@ -15,10 +15,10 @@
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
@ -28,6 +28,9 @@
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
#include <mach/hardware.h>
#include "iomap.h"
#include "clock.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */

View File

@ -58,5 +58,6 @@ void omap1_restart(char, const char *);
extern struct sys_timer omap1_timer;
extern bool omap_32k_timer_init(void);
extern void __init omap_init_consistent_dma_size(void);
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

View File

@ -15,14 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include "common.h"
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
@ -30,6 +26,10 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include "common.h"
#include "clock.h"
/*-------------------------------------------------------------------------*/

View File

@ -19,11 +19,11 @@
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <plat/tc.h>

View File

@ -6,13 +6,15 @@
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <plat/io.h>
#include <plat/tc.h>
#include <plat/flash.h>
#include <mach/hardware.h>
void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;

View File

@ -24,12 +24,15 @@
#include <linux/errno.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
#include "iomap.h"
static void fpga_mask_irq(struct irq_data *d)
{
unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;

View File

@ -218,6 +218,13 @@ static int __init omap16xx_gpio_init(void)
if (!cpu_is_omap16xx())
return -EINVAL;
/*
* Enable system clock for GPIO module.
* The CAM_CLK_CTRL *is* really the right place.
*/
omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
ULPD_CAM_CLK_CTRL);
for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
platform_device_register(omap16xx_gpio_dev[i]);

View File

@ -15,8 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <mach/hardware.h>
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000

View File

@ -9,20 +9,16 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
#include "../../iomap.h"
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]

View File

@ -2,4 +2,40 @@
* arch/arm/mach-omap1/include/mach/hardware.h
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
#ifndef __ASSEMBLER__
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
extern void omap_writeb(u8 v, u32 pa);
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
#include <plat/tc.h>
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
* from NOR flash (using external chipselect 3) rather than mask ROM,
* which uses BM to interchange the physical CS0 and CS3 addresses.
*/
static inline u32 omap_cs0m_phys(void)
{
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? OMAP_CS3_PHYS : 0;
}
static inline u32 omap_cs3_phys(void)
{
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
? 0 : OMAP_CS3_PHYS;
}
#endif
#endif
#include <plat/hardware.h>

View File

@ -1,5 +1,46 @@
/*
* arch/arm/mach-omap1/include/mach/io.h
*
* IO definitions for TI OMAP processors and boards
*
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Modifications:
* 06-12-1997 RMK Created.
* 07-04-1999 RMK Major cleanup
*/
#include <plat/io.h>
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif

View File

@ -18,7 +18,8 @@
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
#ifdef CONFIG_ARCH_OMAP15XX
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
#include <plat/cpu.h>
/*
* OMAP-1510 Local Bus address offset

View File

@ -15,9 +15,12 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include "iomap.h"
#include "common.h"
#include "clock.h"
extern void omap_check_revision(void);

View File

@ -0,0 +1,42 @@
/*
* IO mappings for OMAP1
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
* ----------------------------------------------------------------------------
*/
#define OMAP1_IO_PHYS 0xFFFB0000
#define OMAP1_IO_SIZE 0x40000
#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)

View File

@ -42,11 +42,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <mach/hardware.h>
#define IRQ_BANK(irq) ((irq) >> 5)
#define IRQ_BIT(irq) ((irq) & 0x1f)

View File

@ -27,9 +27,10 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>
#include <plat/dma.h>
int omap_lcd_dma_running(void)
{

View File

@ -19,12 +19,15 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <mach/irqs.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
#include <mach/irqs.h>
#include "iomap.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)

View File

@ -49,7 +49,6 @@
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
@ -57,6 +56,9 @@
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>
#include "iomap.h"
#include "pm.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];

View File

@ -4,9 +4,10 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/prcm.h>
#include <mach/hardware.h>
void omap1_restart(char mode, const char *cmd)
{
/*

View File

@ -33,8 +33,12 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include "iomap.h"
#include "pm.h"
.text

View File

@ -9,10 +9,14 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <mach/hardware.h>
#include "iomap.h"
.text
/*

View File

@ -45,14 +45,15 @@
#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "iomap.h"
#include "common.h"
#ifdef CONFIG_OMAP_MPU_TIMER

View File

@ -47,14 +47,17 @@
#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "common.h"
#include <plat/dmtimer.h>
#include <mach/hardware.h>
#include "common.h"
/*
* ---------------------------------------------------------------------------
* 32KHz OS timer

View File

@ -280,7 +280,6 @@ static struct omap_dss_board_info cm_t35_dss_data = {
static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1, /* 0: slave, 1: master */
};
static struct tdo24m_platform_data tdo24m_config = {

View File

@ -137,7 +137,6 @@ static void __init n8x0_usb_init(void) {}
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
};
static struct spi_board_info n800_spi_board_info[] __initdata = {

View File

@ -138,17 +138,14 @@ static struct lp5523_platform_data rx51_lp5523_platform_data = {
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
};
static struct omap2_mcspi_device_config mipid_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
};
static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
};
static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {

View File

@ -117,7 +117,6 @@ static struct omap_dss_board_info zoom_dss_data = {
static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
.turbo_mode = 1,
.single_channel = 1, /* 0: slave, 1: master */
};
static struct spi_board_info nec_8048_spi_board_info[] __initdata = {

View File

@ -33,6 +33,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>

View File

@ -22,6 +22,7 @@
#include <asm/div64.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include "clock.h"
#include "cm-regbits-24xx.h"

View File

@ -14,11 +14,14 @@
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"

View File

@ -21,8 +21,10 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clock.h>
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"

View File

@ -17,8 +17,10 @@
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"

View File

@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"

View File

@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clock.h>
#include "clock.h"

View File

@ -20,14 +20,15 @@
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"

View File

@ -26,8 +26,11 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "clock44xx.h"
#include "cm1_44xx.h"

View File

@ -18,8 +18,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"

View File

@ -18,8 +18,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"

View File

@ -20,8 +20,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"

View File

@ -33,7 +33,6 @@
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1, /* 0: slave, 1: master */
};
static struct ads7846_platform_data ads7846_config = {

View File

@ -17,12 +17,12 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "common.h"
#include <plat/board.h>
#include <plat/mux.h>
#include <plat/clock.h>
#include "iomap.h"
#include "common.h"
#include "sdrc.h"
#include "control.h"

View File

@ -133,6 +133,8 @@ void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
extern void __init omap_init_consistent_dma_size(void);
/**
* omap_test_timeout - busy-loop, testing a condition
* @cond: condition to test until it evaluates to true
@ -235,5 +237,10 @@ static inline u32 omap4_mpuss_read_prev_context_state(void)
return 0;
}
#endif
struct omap_sdrc_params;
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

View File

@ -15,9 +15,10 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include "common.h"
#include <plat/sdrc.h>
#include "iomap.h"
#include "common.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"

View File

@ -16,7 +16,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
#include <mach/io.h>
#include <mach/ctrl_module_core_44xx.h>
#include <mach/ctrl_module_wkup_44xx.h>
#include <mach/ctrl_module_pad_core_44xx.h>

View File

@ -24,7 +24,7 @@
#include <asm/mach/map.h>
#include <asm/pmu.h>
#include <plat/tc.h>
#include "iomap.h"
#include <plat/board.h>
#include <plat/mcbsp.h>
#include <plat/mmc.h>

View File

@ -30,6 +30,7 @@
#include <plat/omap-pm.h>
#include "common.h"
#include "iomap.h"
#include "mux.h"
#include "control.h"
#include "display.h"

View File

@ -21,6 +21,10 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <mach/hardware.h>
#include "iomap.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shishkin");

View File

@ -16,6 +16,7 @@
#include <asm/mach/flash.h>
#include <plat/cpu.h>
#include <plat/nand.h>
#include <plat/board.h>
#include <plat/gpmc.h>

View File

@ -18,6 +18,7 @@
#include <asm/mach/flash.h>
#include <plat/cpu.h>
#include <plat/onenand.h>
#include <plat/board.h>
#include <plat/gpmc.h>

View File

@ -1,18 +0,0 @@
/*
* arch/arm/plat-omap/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for OMAP-based platforms
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

Some files were not shown because too many files have changed in this diff Show More