From ffc36c7610731115c77700dcc53901920361c235 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 03:43:00 -0700 Subject: [PATCH 1/7] ide: fix handling of unexpected IRQs vs request_irq() Add ide_host_enable_irqs() helper and use it in ide_host_register() before registering ports. Then remove no longer needed IRQ unmasking from in init_irq(). This should fix the problem with "screaming" shared IRQ on the first port (after request_irq() call while we have the unexpected IRQ pending on the second port) which was uncovered by my rework of the serialized interfaces support. Reported-by: Frans Pop Tested-by: Frans Pop Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-probe.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 51af4eea0d36..1bb106f6221a 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -818,6 +818,24 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) return j; } +static void ide_host_enable_irqs(struct ide_host *host) +{ + ide_hwif_t *hwif; + int i; + + ide_host_for_each_port(i, hwif, host) { + if (hwif == NULL) + continue; + + /* clear any pending IRQs */ + hwif->tp_ops->read_status(hwif); + + /* unmask IRQs */ + if (hwif->io_ports.ctl_addr) + hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + } +} + /* * This routine sets up the IRQ for an IDE interface. */ @@ -831,9 +849,6 @@ static int init_irq (ide_hwif_t *hwif) if (irq_handler == NULL) irq_handler = ide_intr; - if (io_ports->ctl_addr) - hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) goto out_up; @@ -1404,6 +1419,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_port_tune_devices(hwif); } + ide_host_enable_irqs(host); + ide_host_for_each_port(i, hwif, host) { if (hwif == NULL) continue; From af054ed0018f0a69f8ea6f7546cbf34385edf13b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 23 Jun 2009 16:01:06 -0700 Subject: [PATCH 2/7] ide-cd: Don't warn on bogus block size unless it actually matters. Frans Pop reported that his CDROM drive reports a blocksize of 2352, and this causes new warnings due to commit e8e7b9eb11c34ee18bde8b7011af41938d1ad667 ("ide-cd: fix oops when using growisofs"). What we're trying to do is make sure that "blocklen >> SECTOR_BITS" is something the block layer won't choke on. And for Frans' case "2352 >> SECTOR_BITS" is equal to "2048 >> SECTOR_BITS", and thats "4". So warning in this case gives no real benefit. Reported-by: Frans Pop Tested-by: Frans Pop Signed-off-by: David S. Miller --- drivers/ide/ide-cd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 4a19686fcfe9..a9a1bfb14e7c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -876,9 +876,12 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, return stat; /* - * Sanity check the given block size + * Sanity check the given block size, in so far as making + * sure the sectors_per_frame we give to the caller won't + * end up being bogus. */ blocklen = be32_to_cpu(capbuf.blocklen); + blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS; switch (blocklen) { case 512: case 1024: From d9ae62433e46909fc9e7d97ce74202c2851667b8 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Tue, 23 Jun 2009 16:02:58 -0700 Subject: [PATCH 3/7] ide-cd: Improve "weird block size" error message Currently the error gets repeated too frequently, for example each time HAL polls the device when a disc is present. Avoid that by using printk_once instead of printk. Also join the error and corrective action messages into a single line. Signed-off-by: Frans Pop Acked-by: Borislav Petkov Signed-off-by: David S. Miller --- drivers/ide/ide-cd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index a9a1bfb14e7c..f0ede5953af8 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -889,10 +889,9 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, case 4096: break; default: - printk(KERN_ERR PFX "%s: weird block size %u\n", + printk_once(KERN_ERR PFX "%s: weird block size %u; " + "setting default block size to 2048\n", drive->name, blocklen); - printk(KERN_ERR PFX "%s: default to 2kb block size\n", - drive->name); blocklen = 2048; break; } From 346c17a6cf60375323adfaa4b8a9d841049f890e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 22 Jun 2009 07:38:26 +0000 Subject: [PATCH 4/7] ide: relax DMA info validity checking There are some broken devices that report multiple DMA xfer modes enabled at once (ATA spec doesn't allow it) but otherwise work fine with DMA so just delete ide_id_dma_bug(). [ As discovered by detective work by Frans and Bart, due to how handling of the ID block was handled before commit c419993 ("ide-iops: only clear DMA words on setting DMA mode") this check was always seeing zeros in the fields or other similar garbage. Therefore this check wasn't actually checking anything. Now that the tests actually check the real bits, all we see are devices that trigger the check yet work perfectly fine, therefore killing this useless check is the best thing to do. -DaveM ] Reported-by: Frans Pop Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-dma.c | 21 --------------------- drivers/ide/ide-iops.c | 3 --- include/linux/ide.h | 2 -- 3 files changed, 26 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 219e6fb78dc6..ee58c88dee5a 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -361,9 +361,6 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; - if (ide_id_dma_bug(drive)) - return 0; - if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -394,24 +391,6 @@ static int ide_dma_check(ide_drive_t *drive) return -1; } -int ide_id_dma_bug(ide_drive_t *drive) -{ - u16 *id = drive->id; - - if (id[ATA_ID_FIELD_VALID] & 4) { - if ((id[ATA_ID_UDMA_MODES] >> 8) && - (id[ATA_ID_MWDMA_MODES] >> 8)) - goto err_out; - } else if ((id[ATA_ID_MWDMA_MODES] >> 8) && - (id[ATA_ID_SWDMA_MODES] >> 8)) - goto err_out; - - return 0; -err_out: - printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); - return 1; -} - int ide_set_dma(ide_drive_t *drive) { int rc; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index fa047150a1c6..917186ec4966 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -329,9 +329,6 @@ int ide_driveid_update(ide_drive_t *drive) kfree(id); - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive)) - ide_dma_off(drive); - return 1; out_err: if (rc == 2) diff --git a/include/linux/ide.h b/include/linux/ide.h index 95c6e00a72e8..cf1f3888067c 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1361,7 +1361,6 @@ int ide_in_drive_list(u16 *, const struct drive_list_entry *); #ifdef CONFIG_BLK_DEV_IDEDMA int ide_dma_good_drive(ide_drive_t *); int __ide_dma_bad_drive(ide_drive_t *); -int ide_id_dma_bug(ide_drive_t *); u8 ide_find_dma_mode(ide_drive_t *, u8); @@ -1402,7 +1401,6 @@ void ide_dma_lost_irq(ide_drive_t *); ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int); #else -static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; } static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; } From ba9413bd284e79ea43b0ae406a7a29526aaf82b3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 16:11:10 -0700 Subject: [PATCH 5/7] ide: add QUANTUM FIREBALLct20 30 with firmware APL.090 to ivb_list[] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-iops.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 917186ec4966..2892b242bbe1 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -210,6 +210,7 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); */ static const struct drive_list_entry ivb_list[] = { { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, + { "QUANTUM FIREBALLlct20 30" , "APL.0900" }, { "TSSTcorp CDDVDW SH-S202J" , "SB00" }, { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, From a1317f714af7aed60ddc182d0122477cbe36ee9b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 23:52:17 -0700 Subject: [PATCH 6/7] ide: improve handling of Power Management requests Make hwif->rq point to PM request during PM sequence and do not allow any other types of requests to slip in (the old comment was never correct as there should be no such requests generated during PM sequence). Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-io.c | 54 ++++++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 32 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1059f809b809..93b7886a2d6e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -476,10 +476,14 @@ void do_ide_request(struct request_queue *q) if (!ide_lock_port(hwif)) { ide_hwif_t *prev_port; - - WARN_ON_ONCE(hwif->rq); repeat: prev_port = hwif->host->cur_port; + + if (drive->dev_flags & IDE_DFLAG_BLOCKED) + rq = hwif->rq; + else + WARN_ON_ONCE(hwif->rq); + if (drive->dev_flags & IDE_DFLAG_SLEEPING && time_after(drive->sleep, jiffies)) { ide_unlock_port(hwif); @@ -506,43 +510,29 @@ repeat: hwif->cur_dev = drive; drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED); - spin_unlock_irq(&hwif->lock); - spin_lock_irq(q->queue_lock); - /* - * we know that the queue isn't empty, but this can happen - * if the q->prep_rq_fn() decides to kill a request - */ - if (!rq) + if (rq == NULL) { + spin_unlock_irq(&hwif->lock); + spin_lock_irq(q->queue_lock); + /* + * we know that the queue isn't empty, but this can + * happen if ->prep_rq_fn() decides to kill a request + */ rq = blk_fetch_request(drive->queue); + spin_unlock_irq(q->queue_lock); + spin_lock_irq(&hwif->lock); - spin_unlock_irq(q->queue_lock); - spin_lock_irq(&hwif->lock); - - if (!rq) { - ide_unlock_port(hwif); - goto out; + if (rq == NULL) { + ide_unlock_port(hwif); + goto out; + } } /* * Sanity: don't accept a request that isn't a PM request - * if we are currently power managed. This is very important as - * blk_stop_queue() doesn't prevent the blk_fetch_request() - * above to return us whatever is in the queue. Since we call - * ide_do_request() ourselves, we end up taking requests while - * the queue is blocked... - * - * We let requests forced at head of queue with ide-preempt - * though. I hope that doesn't happen too much, hopefully not - * unless the subdriver triggers such a thing in its own PM - * state machine. + * if we are currently power managed. */ - if ((drive->dev_flags & IDE_DFLAG_BLOCKED) && - blk_pm_request(rq) == 0 && - (rq->cmd_flags & REQ_PREEMPT) == 0) { - /* there should be no pending command at this point */ - ide_unlock_port(hwif); - goto plug_device; - } + BUG_ON((drive->dev_flags & IDE_DFLAG_BLOCKED) && + blk_pm_request(rq) == 0); hwif->rq = rq; From d7e2f36d9a92284754ed5254562766cb3d61c7ca Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 24 Jun 2009 02:36:17 -0700 Subject: [PATCH 7/7] ide cs5520: Initialize second port's interrupt number. In 86ccf37c6acd74cf7e4b7751ee045de19943c5a0 the driver was modified to deal with the removal of the pciirq argument to ide_pci_setup_ports(). But in the conversion only the first port's IRQ gets setup. Inspired by a patch by Bartlomiej Zolnierkiewicz., and with help from Alan Cox. Signed-off-by: David S. Miller --- drivers/ide/cs5520.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index bd066bb9d611..09f98ed0731f 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -135,6 +135,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); hw[0].irq = 14; + hw[1].irq = 15; return ide_host_add(d, hws, 2, NULL); }