OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge /spare/repo/linux-2.6/

This commit is contained in:
Jeff Garzik 2005-08-18 22:14:39 -04:00
parent 54cfb5aa0f 91aa9fb573
commit a3bc068022
142 changed files with 1167 additions and 831 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
CREDITS
View File

@ -2423,8 +2423,7 @@ S: Toronto, Ontario
S: Canada
N: Zwane Mwaikambo
E: zwane@linuxpower.ca
W: http://function.linuxpower.ca
E: zwane@arm.linux.org.uk
D: Various driver hacking
D: Lowlevel x86 kernel hacking
D: General debugging

3
Documentation/acpi-hotkey.txt
View File

@ -33,3 +33,6 @@ The result of the execution of this aml method is
attached to /proc/acpi/hotkey/poll_method, which is dnyamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.
Note: Use cmdline "acpi_generic_hotkey" to over-ride
loading any platform specific drivers.

5
Documentation/kernel-parameters.txt
View File

@ -159,6 +159,11 @@ running once the system is up.
acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT
acpi_generic_hotkey [HW,ACPI]
Allow consolidated generic hotkey driver to
over-ride platform specific driver.
See also Documentation/acpi-hotkey.txt.
ad1816= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>
See also Documentation/sound/oss/AD1816.

14
Documentation/pci.txt
View File

@ -266,20 +266,6 @@ port an old driver to the new PCI interface. They are no longer present
in the kernel as they aren't compatible with hotplug or PCI domains or
having sane locking.
pcibios_present() and Since ages, you don't need to test presence
pci_present() of PCI subsystem when trying to talk to it.
If it's not there, the list of PCI devices
is empty and all functions for searching for
devices just return NULL.
pcibios_(read|write)_* Superseded by their pci_(read|write)_*
counterparts.
pcibios_find_* Superseded by their pci_get_* counterparts.
pci_for_each_dev() Superseded by pci_get_device()
pci_for_each_dev_reverse() Superseded by pci_find_device_reverse()
pci_for_each_bus() Superseded by pci_find_next_bus()
pci_find_device() Superseded by pci_get_device()
pci_find_subsys() Superseded by pci_get_subsys()
pci_find_slot() Superseded by pci_get_slot()
pcibios_find_class() Superseded by pci_get_class()
pci_find_class() Superseded by pci_get_class()
pci_(read|write)_*_nodev() Superseded by pci_bus_(read|write)_*()

18
MAINTAINERS
View File

@ -784,7 +784,7 @@ DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: linux-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/developer/dvb.xml
W: http://linuxtv.org/
S: Supported
EATA-DMA SCSI DRIVER
@ -1739,7 +1739,7 @@ S: Maintained
OPL3-SA2, SA3, and SAx DRIVER
P: Zwane Mwaikambo
M: zwane@commfireservices.com
M: zwane@arm.linux.org.uk
L: linux-sound@vger.kernel.org
S: Maintained
@ -1825,6 +1825,12 @@ P: Greg Kroah-Hartman
M: greg@kroah.com
S: Maintained
PCIE HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
S: Maintained
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
@ -1989,7 +1995,7 @@ S: Maintained
SC1200 WDT DRIVER
P: Zwane Mwaikambo
M: zwane@commfireservices.com
M: zwane@arm.linux.org.uk
S: Maintained
SCHEDULER
@ -2201,6 +2207,12 @@ W: http://projects.buici.com/arm
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
SHPC HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
S: Maintained
SPARC (sparc32):
P: William L. Irwin
M: wli@holomorphy.com

6
arch/arm/kernel/calls.S
View File

@ -327,6 +327,12 @@ __syscall_start:
/* 310 */ .long sys_request_key
.long sys_keyctl
.long sys_semtimedop
/* vserver */ .long sys_ni_syscall
.long sys_ioprio_set
/* 315 */ .long sys_ioprio_get
.long sys_inotify_init
.long sys_inotify_add_watch
.long sys_inotify_rm_watch
__syscall_end:
.rept NR_syscalls - (__syscall_end - __syscall_start) / 4

4
arch/arm/mach-s3c2410/s3c2410.c
View File

@ -18,6 +18,7 @@
* 28-Sep-2004 BJD Updates for new serial port bits
* 04-Nov-2004 BJD Updated UART configuration process
* 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate
* 13-Aug-2005 DA Removed UART from initial I/O mappings
*/
#include <linux/kernel.h>
@ -49,10 +50,9 @@ static struct map_desc s3c2410_iodesc[] __initdata = {
IODESC_ENT(USBHOST),
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(ADC),
IODESC_ENT(WATCHDOG)
IODESC_ENT(WATCHDOG),
};
static struct resource s3c_uart0_resource[] = {

2
arch/arm/mm/Kconfig
View File

@ -384,7 +384,7 @@ config CPU_DCACHE_DISABLE
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you

2
arch/arm/mm/proc-v6.S
View File

@ -105,7 +105,7 @@ ENTRY(cpu_v6_dcache_clean_area)
ENTRY(cpu_v6_switch_mm)
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
mcr p15, 0, r1, c13, c0, 1 @ set context ID

34
arch/arm/nwfpe/softfloat.c
View File

@ -1602,9 +1602,7 @@ flag float32_le_quiet( float32 a, float32 b )
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
@ -1629,9 +1627,7 @@ flag float32_lt_quiet( float32 a, float32 b )
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
@ -2493,9 +2489,7 @@ flag float64_le_quiet( float64 a, float64 b )
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
@ -2520,9 +2514,7 @@ flag float64_lt_quiet( float64 a, float64 b )
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
@ -3256,7 +3248,7 @@ flag floatx80_eq( floatx80 a, floatx80 b )
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
}
return 0;
}
@ -3286,7 +3278,7 @@ flag floatx80_le( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
@ -3320,7 +3312,7 @@ flag floatx80_lt( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
@ -3353,7 +3345,7 @@ flag floatx80_eq_signaling( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
return 0;
}
return
@ -3382,10 +3374,7 @@ flag floatx80_le_quiet( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
roundData->exception |= float_flag_invalid;
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );
@ -3419,10 +3408,7 @@ flag floatx80_lt_quiet( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
roundData->exception |= float_flag_invalid;
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );

4
arch/i386/kernel/apic.c
View File

@ -726,15 +726,11 @@ __setup("apic=", apic_set_verbosity);
static int __init detect_init_APIC (void)
{
u32 h, l, features;
extern void get_cpu_vendor(struct cpuinfo_x86*);
/* Disabled by kernel option? */
if (enable_local_apic < 0)
return -1;
/* Workaround for us being called before identify_cpu(). */
get_cpu_vendor(&boot_cpu_data);
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||

11
arch/ia64/Kconfig
View File

@ -392,15 +392,8 @@ menu "Bus options (PCI, PCMCIA)"
config PCI
bool "PCI support"
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
here unless you are using a simulator without PCI support.
config PCI_DOMAINS
bool

262
arch/ia64/configs/sn2_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10
# Mon Jan 10 13:57:35 2005
# Linux kernel version: 2.6.13-rc6
# Tue Aug 16 14:40:41 2005
#
#
@ -10,6 +10,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@ -21,24 +22,26 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CPUSETS=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
@ -63,9 +66,12 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
CONFIG_IA64_SGI_SN2=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
@ -74,6 +80,10 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_NUMA=y
CONFIG_VIRTUAL_MEM_MAP=y
@ -81,11 +91,20 @@ CONFIG_HOLES_IN_ZONE=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
CONFIG_IA64_SGI_SN_XP=m
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=512
# CONFIG_HOTPLUG_CPU is not set
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@ -105,6 +124,7 @@ CONFIG_BINFMT_ELF=y
#
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_ACPI=y
#
@ -114,6 +134,7 @@ CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_NUMA=y
@ -133,6 +154,7 @@ CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
@ -141,7 +163,6 @@ CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_SGI=y
@ -151,8 +172,70 @@ CONFIG_HOTPLUG_PCI_SGI=y
# CONFIG_PCCARD is not set
#
# PC-card bridges
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
@ -163,7 +246,7 @@ CONFIG_HOTPLUG_PCI_SGI=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
@ -188,6 +271,7 @@ CONFIG_FW_LOADER=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@ -252,6 +336,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@ -282,6 +367,7 @@ CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@ -315,24 +401,20 @@ CONFIG_SCSI_SATA=y
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
CONFIG_SCSI_SATA_VITESSE=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
@ -342,6 +424,8 @@ CONFIG_SCSI_QLA22XX=y
CONFIG_SCSI_QLA2300=y
CONFIG_SCSI_QLA2322=y
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@ -364,11 +448,15 @@ CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
@ -383,82 +471,13 @@ CONFIG_FUSION_CTL=m
# CONFIG_I2O is not set
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@ -480,8 +499,10 @@ CONFIG_NETDEVICES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@ -512,6 +533,10 @@ CONFIG_S2IO=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@ -540,14 +565,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#
@ -557,6 +574,12 @@ CONFIG_SOUND_GAMEPORT=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
@ -568,9 +591,10 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_STALDRV is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
@ -587,6 +611,7 @@ CONFIG_SGI_MBCS=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
@ -615,18 +640,30 @@ CONFIG_EFI_RTC=y
CONFIG_RAW_DRIVER=m
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
@ -660,6 +697,8 @@ CONFIG_DUMMY_CONSOLE=y
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@ -669,9 +708,8 @@ CONFIG_USB=m
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@ -679,7 +717,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
@ -710,12 +751,15 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
@ -740,6 +784,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
@ -763,9 +808,12 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
#
# USB ATM/DSL drivers
# USB DSL modem support
#
#
@ -782,6 +830,7 @@ CONFIG_USB_HIDINPUT=y
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_VERBS=m
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
@ -799,6 +848,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@ -814,13 +864,19 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
@ -854,7 +910,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
@ -885,15 +940,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@ -980,6 +1038,9 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Profiling support
@ -989,15 +1050,19 @@ CONFIG_ZLIB_DEFLATE=m
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
@ -1019,11 +1084,12 @@ CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set

149
arch/ia64/configs/tiger_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc1-20050629
# Wed Jun 29 15:28:12 2005
# Linux kernel version: 2.6.13-rc6-tiger-smp
# Wed Aug 17 10:19:51 2005
#
#
@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_HOTPLUG_CPU is not set
@ -169,6 +170,66 @@ CONFIG_HOTPLUG_PCI_ACPI=m
#
# CONFIG_PCCARD is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
@ -178,7 +239,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@ -348,6 +409,7 @@ CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@ -393,72 +455,8 @@ CONFIG_FUSION_CTL=y
# CONFIG_I2O is not set
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
@ -555,6 +553,10 @@ CONFIG_TIGON3=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@ -680,6 +682,7 @@ CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
@ -696,12 +699,19 @@ CONFIG_MAX_RAW_DEVS=256
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
@ -800,6 +810,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
@ -850,6 +861,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
@ -910,6 +922,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y

224
arch/ia64/configs/zx1_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc1-20050629
# Wed Jun 29 15:31:11 2005
# Linux kernel version: 2.6.13-rc6
# Wed Aug 17 10:02:43 2005
#
#
@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
@ -168,6 +169,83 @@ CONFIG_HOTPLUG_PCI_ACPI=y
#
# CONFIG_PCCARD is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
@ -349,6 +427,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@ -362,9 +441,11 @@ CONFIG_SCSI_QLA2XXX=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
# IEEE 1394 (FireWire) support
@ -377,87 +458,8 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_I2O is not set
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
@ -555,6 +557,8 @@ CONFIG_TIGON3=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@ -659,6 +663,7 @@ CONFIG_DRM=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
@ -706,47 +711,10 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
@ -766,6 +734,11 @@ CONFIG_I2C_ALGOPCF=y
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
@ -782,7 +755,6 @@ CONFIG_VIDEO_DEV=y
#
# Video Adapters
#
# CONFIG_TUNER_MULTI_I2C is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
@ -1025,6 +997,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
@ -1080,6 +1053,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
#
# USB DSL modem support
@ -1121,6 +1095,7 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
@ -1128,6 +1103,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y

2
arch/ia64/kernel/domain.c
View File

@ -341,7 +341,7 @@ next_sg:
#endif
/* Attach the domains */
for_each_online_cpu(i) {
for_each_cpu_mask(i, *cpu_map) {
struct sched_domain *sd;
#ifdef CONFIG_SCHED_SMT
sd = &per_cpu(cpu_domains, i);

1
arch/ia64/kernel/perfmon.c
View File

@ -4312,6 +4312,7 @@ pfm_context_load(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
DPRINT(("before cmpxchg() old_ctx=%p new_ctx=%p\n",
thread->pfm_context, ctx));
ret = -EBUSY;
old = ia64_cmpxchg(acq, &thread->pfm_context, NULL, ctx, sizeof(pfm_context_t *));
if (old != NULL) {
DPRINT(("load_pid [%d] already has a context\n", req->load_pid));

3
arch/ia64/kernel/salinfo.c
View File

@ -143,7 +143,8 @@ struct salinfo_data {
static struct salinfo_data salinfo_data[ARRAY_SIZE(salinfo_log_name)];
static spinlock_t data_lock, data_saved_lock;
static DEFINE_SPINLOCK(data_lock);
static DEFINE_SPINLOCK(data_saved_lock);
/** salinfo_platform_oemdata - optional callback to decode oemdata from an error
* record.

1
arch/ia64/sn/kernel/io_init.c
View File

@ -203,6 +203,7 @@ static void sn_fixup_ionodes(void)
continue;
}
spin_lock_init(&sn_flush_device_list->sfdl_flush_lock);
hubdev->hdi_flush_nasid_list.widget_p[widget] =
sn_flush_device_list;
}

10
arch/ppc/syslib/ppc4xx_dma.c
View File

@ -620,6 +620,7 @@ ppc4xx_clr_dma_status(unsigned int dmanr)
return DMA_STATUS_GOOD;
}
#ifdef CONFIG_PPC4xx_EDMA
/*
* Enables the burst on the channel (BTEN bit in the control/count register)
* Note:
@ -685,6 +686,11 @@ ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
return DMA_STATUS_GOOD;
}
EXPORT_SYMBOL(ppc4xx_enable_burst);
EXPORT_SYMBOL(ppc4xx_disable_burst);
EXPORT_SYMBOL(ppc4xx_set_burst_size);
#endif /* CONFIG_PPC4xx_EDMA */
EXPORT_SYMBOL(ppc4xx_init_dma_channel);
EXPORT_SYMBOL(ppc4xx_get_channel_config);
EXPORT_SYMBOL(ppc4xx_set_channel_priority);
@ -703,6 +709,4 @@ EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
EXPORT_SYMBOL(ppc4xx_get_dma_status);
EXPORT_SYMBOL(ppc4xx_clr_dma_status);
EXPORT_SYMBOL(ppc4xx_enable_burst);
EXPORT_SYMBOL(ppc4xx_disable_burst);
EXPORT_SYMBOL(ppc4xx_set_burst_size);

79
arch/ppc64/kernel/LparData.c
View File

@ -32,32 +32,12 @@
/* The HvReleaseData is the root of the information shared between
* the hypervisor and Linux.
*/
/*
* WARNING - magic here
*
* Ok, this is a horrid hack below, but marginally better than the
* alternatives. What we really want is just to initialize
* hvReleaseData in C as in the #if 0 section here. However, gcc
* refuses to believe that (u32)&x is a constant expression, so will
* not allow the xMsNucDataOffset field to be properly initialized.
* So, we declare hvReleaseData in inline asm instead. We use inline
* asm, rather than a .S file, because the assembler won't generate
* the necessary relocation for the LparMap either, unless that symbol
* is declared in the same source file. Finally, we put the asm in a
* dummy, attribute-used function, instead of at file scope, because
* file scope asms don't allow contraints. We want to use the "i"
* constraints to put sizeof() and offsetof() expressions in there,
* because including asm/offsets.h in C code then stringifying causes
* all manner of warnings.
*/
#if 0
struct HvReleaseData hvReleaseData = {
.xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */
.xSize = sizeof(struct HvReleaseData),
.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
.xSlicNacaAddr = &naca, /* 64-bit Naca address */
.xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE),
.xMsNucDataOffset = LPARMAP_PHYS,
.xFlags = HVREL_TAGSINACTIVE /* tags inactive */
/* 64 bit */
/* shared processors */
@ -70,63 +50,6 @@ struct HvReleaseData hvReleaseData = {
0xa7, 0x40, 0xf2, 0x4b,
0xf4, 0x4b, 0xf6, 0xf4 },
};
#endif
extern struct HvReleaseData hvReleaseData;
static void __attribute_used__ hvReleaseData_wrapper(void)
{
/* This doesn't appear to need any alignment (even 4 byte) */
asm volatile (
" lparMapPhys = xLparMap - %3\n"
" .data\n"
" .globl hvReleaseData\n"
"hvReleaseData:\n"
" .long 0xc8a5d9c4\n" /* xDesc */
/* "HvRD" in ebcdic */
" .short %0\n" /* xSize */
" .short %1\n" /* xVpdAreasPtrOffset */
" .llong naca\n" /* xSlicNacaAddr */
" .long lparMapPhys\n" /* xMsNucDataOffset */
" .long 0\n" /* xRsvd1 */
" .short %2\n" /* xFlags */
" .short 4\n" /* xVrmIndex - v5r2m0 */
" .short 3\n" /* xMinSupportedPlicVrmIndex - v5r1m0 */
" .short 3\n" /* xMinCompatablePlicVrmIndex - v5r1m0 */
" .long 0xd38995a4\n" /* xVrmName */
" .long 0xa740f24b\n" /* "Linux 2.4.64" ebcdic */
" .long 0xf44bf6f4\n"
" . = hvReleaseData + %0\n"
" .previous\n"
: : "i"(sizeof(hvReleaseData)),
"i"(offsetof(struct naca_struct, xItVpdAreas)),
"i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */
/* shared processors, HMT allowed */
| 6), /* TEMP: This allows non-GA drivers */
"i"(KERNELBASE)
);
}
struct LparMap __attribute__((aligned (16))) xLparMap = {
.xNumberEsids = HvEsidsToMap,
.xNumberRanges = HvRangesToMap,
.xSegmentTableOffs = STAB0_PAGE,
.xEsids = {
{ .xKernelEsid = GET_ESID(KERNELBASE),
.xKernelVsid = KERNEL_VSID(KERNELBASE), },
{ .xKernelEsid = GET_ESID(VMALLOCBASE),
.xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
},
.xRanges = {
{ .xPages = HvPagesToMap,
.xOffset = 0,
.xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
},
},
};
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);

5
arch/ppc64/kernel/Makefile
View File

@ -73,3 +73,8 @@ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_KPROBES) += kprobes.o
CFLAGS_ioctl32.o += -Ifs/
ifeq ($(CONFIG_PPC_ISERIES),y)
arch/ppc64/kernel/head.o: arch/ppc64/kernel/lparmap.s
AFLAGS_head.o += -Iarch/ppc64/kernel
endif

6
arch/ppc64/kernel/head.S
View File

@ -38,6 +38,7 @@
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/hvcall.h>
#include <asm/iSeries/LparMap.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
@ -679,6 +680,11 @@ hardware_interrupt_iSeries_masked:
.globl fwnmi_data_area
fwnmi_data_area:
#ifdef CONFIG_PPC_ISERIES
. = LPARMAP_PHYS
#include "lparmap.s"
#endif /* CONFIG_PPC_ISERIES */
/*
* Vectors for the FWNMI option. Share common code.
*/

7
arch/ppc64/kernel/iommu.c
View File

@ -242,7 +242,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
dma_addr_t dma_next = 0, dma_addr;
unsigned long flags;
struct scatterlist *s, *outs, *segstart;
int outcount;
int outcount, incount;
unsigned long handle;
BUG_ON(direction == DMA_NONE);
@ -252,6 +252,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
outs = s = segstart = &sglist[0];
outcount = 1;
incount = nelems;
handle = 0;
/* Init first segment length for backout at failure */
@ -338,10 +339,10 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
DBG("mapped %d elements:\n", outcount);
/* For the sake of iommu_free_sg, we clear out the length in the
/* For the sake of iommu_unmap_sg, we clear out the length in the
* next entry of the sglist if we didn't fill the list completely
*/
if (outcount < nelems) {
if (outcount < incount) {
outs++;
outs->dma_address = DMA_ERROR_CODE;
outs->dma_length = 0;

31
arch/ppc64/kernel/lparmap.c Normal file
View File

@ -0,0 +1,31 @@
/*
* Copyright (C) 2005 Stephen Rothwell IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/iSeries/LparMap.h>
const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
.xNumberEsids = HvEsidsToMap,
.xNumberRanges = HvRangesToMap,
.xSegmentTableOffs = STAB0_PAGE,
.xEsids = {
{ .xKernelEsid = GET_ESID(KERNELBASE),
.xKernelVsid = KERNEL_VSID(KERNELBASE), },
{ .xKernelEsid = GET_ESID(VMALLOCBASE),
.xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
},
.xRanges = {
{ .xPages = HvPagesToMap,
.xOffset = 0,
.xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
},
},
};

5
arch/sh/kernel/entry.S
View File

@ -1145,5 +1145,10 @@ ENTRY(sys_call_table)
.long sys_add_key /* 285 */
.long sys_request_key
.long sys_keyctl
.long sys_ioprio_set
.long sys_ioprio_get
.long sys_inotify_init /* 290 */
.long sys_inotify_add_watch
.long sys_inotify_rm_watch
/* End of entry.S */

5
arch/sh64/kernel/syscalls.S
View File

@ -342,4 +342,9 @@ sys_call_table:
.long sys_add_key
.long sys_request_key
.long sys_keyctl /* 315 */
.long sys_ioprio_set
.long sys_ioprio_get
.long sys_inotify_init
.long sys_inotify_add_watch
.long sys_inotify_rm_watch /* 320 */

36
arch/sparc64/kernel/us2e_cpufreq.c
View File

@ -88,7 +88,6 @@ static void frob_mem_refresh(int cpu_slowing_down,
{
unsigned long old_refr_count, refr_count, mctrl;
refr_count = (clock_tick * MCTRL0_REFR_INTERVAL);
refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL);
@ -230,6 +229,25 @@ static unsigned long estar_to_divisor(unsigned long estar)
return ret;
}
static unsigned int us2e_freq_get(unsigned int cpu)
{
cpumask_t cpus_allowed;
unsigned long clock_tick, estar;
if (!cpu_online(cpu))
return 0;
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
clock_tick = sparc64_get_clock_tick(cpu) / 1000;
estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
set_cpus_allowed(current, cpus_allowed);
return clock_tick / estar_to_divisor(estar);
}
static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
{
unsigned long new_bits, new_freq;
@ -243,7 +261,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
new_freq = clock_tick = sparc64_get_clock_tick(cpu);
new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
new_bits = index_to_estar_mode(index);
divisor = index_to_divisor(index);
new_freq /= divisor;
@ -258,7 +276,8 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
if (old_divisor != divisor)
us2e_transition(estar, new_bits, clock_tick, old_divisor, divisor);
us2e_transition(estar, new_bits, clock_tick * 1000,
old_divisor, divisor);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
@ -272,10 +291,8 @@ static int us2e_freq_target(struct cpufreq_policy *policy,
unsigned int new_index = 0;
if (cpufreq_frequency_table_target(policy,
&us2e_freq_table[policy->cpu].table[0],
target_freq,
relation,
&new_index))
&us2e_freq_table[policy->cpu].table[0],
target_freq, relation, &new_index))
return -EINVAL;
us2e_set_cpu_divider_index(policy->cpu, new_index);
@ -292,7 +309,7 @@ static int us2e_freq_verify(struct cpufreq_policy *policy)
static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
{
unsigned int cpu = policy->cpu;
unsigned long clock_tick = sparc64_get_clock_tick(cpu);
unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
struct cpufreq_frequency_table *table =
&us2e_freq_table[cpu].table[0];
@ -351,9 +368,10 @@ static int __init us2e_freq_init(void)
memset(us2e_freq_table, 0,
(NR_CPUS * sizeof(struct us2e_freq_percpu_info)));
driver->init = us2e_freq_cpu_init;
driver->verify = us2e_freq_verify;
driver->target = us2e_freq_target;
driver->init = us2e_freq_cpu_init;
driver->get = us2e_freq_get;
driver->exit = us2e_freq_cpu_exit;
driver->owner = THIS_MODULE,
strcpy(driver->name, "UltraSPARC-IIe");

29
arch/sparc64/kernel/us3_cpufreq.c
View File

@ -56,7 +56,7 @@ static void write_safari_cfg(unsigned long val)
static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg)
{
unsigned long clock_tick = sparc64_get_clock_tick(cpu);
unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
unsigned long ret;
switch (safari_cfg & SAFARI_CFG_DIV_MASK) {
@ -76,6 +76,26 @@ static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg
return ret;
}
static unsigned int us3_freq_get(unsigned int cpu)
{
cpumask_t cpus_allowed;
unsigned long reg;
unsigned int ret;
if (!cpu_online(cpu))
return 0;
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
reg = read_safari_cfg();
ret = get_current_freq(cpu, reg);
set_cpus_allowed(current, cpus_allowed);
return ret;
}
static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
{
unsigned long new_bits, new_freq, reg;
@ -88,7 +108,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
new_freq = sparc64_get_clock_tick(cpu);
new_freq = sparc64_get_clock_tick(cpu) / 1000;
switch (index) {
case 0:
new_bits = SAFARI_CFG_DIV_1;
@ -150,7 +170,7 @@ static int us3_freq_verify(struct cpufreq_policy *policy)
static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
{
unsigned int cpu = policy->cpu;
unsigned long clock_tick = sparc64_get_clock_tick(cpu);
unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
struct cpufreq_frequency_table *table =
&us3_freq_table[cpu].table[0];
@ -206,9 +226,10 @@ static int __init us3_freq_init(void)
memset(us3_freq_table, 0,
(NR_CPUS * sizeof(struct us3_freq_percpu_info)));
driver->init = us3_freq_cpu_init;
driver->verify = us3_freq_verify;
driver->target = us3_freq_target;
driver->init = us3_freq_cpu_init;
driver->get = us3_freq_get;
driver->exit = us3_freq_cpu_exit;
driver->owner = THIS_MODULE,
strcpy(driver->name, "UltraSPARC-III");

6
arch/um/kernel/skas/process.c
View File

@ -61,7 +61,11 @@ void wait_stub_done(int pid, int sig, char * fname)
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
} while((n >= 0) && WIFSTOPPED(status) &&
(WSTOPSIG(status) == SIGVTALRM));
((WSTOPSIG(status) == SIGVTALRM) ||
/* running UML inside a detached screen can cause
* SIGWINCHes
*/
(WSTOPSIG(status) == SIGWINCH)));
if((n < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){

1
arch/um/os-Linux/elf_aux.c
View File

@ -9,7 +9,6 @@
*/
#include <elf.h>
#include <stddef.h>
#include <asm/elf.h>
#include "init.h"
#include "elf_user.h"
#include "mem_user.h"

2
arch/x86_64/kernel/smpboot.c
View File

@ -334,7 +334,7 @@ static void __cpuinit tsc_sync_wait(void)
{
if (notscsync || !cpu_has_tsc)
return;
sync_tsc(boot_cpu_id);
sync_tsc(0);
}
static __init int notscsync_setup(char *s)

2
drivers/acpi/motherboard.c
View File

@ -43,7 +43,7 @@ ACPI_MODULE_NAME ("acpi_motherboard")
*/
#define IS_RESERVED_ADDR(base, len) \
(((len) > 0) && ((base) > 0) && ((base) + (len) < IO_SPACE_LIMIT) \
&& ((base) + (len) > 0x1000))
&& ((base) + (len) > PCIBIOS_MIN_IO))
/*
* Clearing the flag (IORESOURCE_BUSY) allows drivers to use

6
drivers/acpi/osl.c
View File

@ -71,7 +71,7 @@ EXPORT_SYMBOL(acpi_in_debugger);
extern char line_buf[80];
#endif /*ENABLE_DEBUGGER*/
int acpi_specific_hotkey_enabled;
int acpi_specific_hotkey_enabled = TRUE;
EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
static unsigned int acpi_irq_irq;
@ -1162,11 +1162,11 @@ __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
int __init
acpi_hotkey_setup(char *str)
{
acpi_specific_hotkey_enabled = TRUE;
acpi_specific_hotkey_enabled = FALSE;
return 1;
}
__setup("acpi_specific_hotkey", acpi_hotkey_setup);
__setup("acpi_generic_hotkey", acpi_hotkey_setup);
/*
* max_cstate is defined in the base kernel so modules can

4
drivers/base/bus.c
View File

@ -180,7 +180,9 @@ static ssize_t driver_bind(struct device_driver *drv,
up(&dev->sem);
put_device(dev);
}
return err;
if (err)
return err;
return count;
}
static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);

10
drivers/base/class.c
View File

@ -299,6 +299,11 @@ static void class_dev_release(struct kobject * kobj)
pr_debug("device class '%s': release.\n", cd->class_id);
if (cd->devt_attr) {
kfree(cd->devt_attr);
cd->devt_attr = NULL;
}
if (cls->release)
cls->release(cd);
else {
@ -591,11 +596,8 @@ void class_device_del(struct class_device *class_dev)
if (class_dev->dev)
sysfs_remove_link(&class_dev->kobj, "device");
if (class_dev->devt_attr) {
if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
kfree(class_dev->devt_attr);
class_dev->devt_attr = NULL;
}
class_device_remove_attrs(class_dev);
kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);

12
drivers/char/mem.c
View File

@ -261,7 +261,11 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
{
unsigned long long val;
unsigned long pfn;
/* Turn a kernel-virtual address into a physical page frame */
pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
/*
* RED-PEN: on some architectures there is more mapped memory
* than available in mem_map which pfn_valid checks
@ -269,10 +273,10 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
*
* RED-PEN: vmalloc is not supported right now.
*/
if (!pfn_valid(vma->vm_pgoff))
if (!pfn_valid(pfn))
return -EIO;
val = (u64)vma->vm_pgoff << PAGE_SHIFT;
vma->vm_pgoff = __pa(val) >> PAGE_SHIFT;
vma->vm_pgoff = pfn;
return mmap_mem(file, vma);
}

1
drivers/ide/Kconfig
View File

@ -764,6 +764,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
config BLK_DEV_IDEDMA_PMAC
bool "PowerMac IDE DMA support"
depends on BLK_DEV_IDE_PMAC
select BLK_DEV_IDEDMA_PCI
help
This option allows the driver for the built-in IDE controller on
Power Macintoshes and PowerBooks to use DMA (direct memory access)

2
drivers/ide/ide-floppy.c
View File

@ -317,7 +317,7 @@ typedef struct ide_floppy_obj {
unsigned long flags;
} idefloppy_floppy_t;
#define IDEFLOPPY_TICKS_DELAY 3 /* default delay for ZIP 100 */
#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
/*
* Floppy flag bits values.

7
drivers/ide/pci/generic.c
View File

@ -173,6 +173,12 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = {
.channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
},{ /* 14 */
.name = "Revolution",
.init_hwif = init_hwif_generic,
.channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
}
};
@ -231,6 +237,7 @@ static struct pci_device_id generic_pci_tbl[] = {
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
/* Must come last. If you add entries adjust this table appropriately and the init_one code */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
{ 0, },

23
drivers/ide/pci/serverworks.c
View File

@ -21,6 +21,9 @@
*
* CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
*
* HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
* controller same as the CSB6. Single channel ATA100 only.
*
* Documentation:
* Available under NDA only. Errata info very hard to get.
*
@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive)
if (!svwks_revision)
pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
return 2;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
u32 reg = 0;
if (isa_dev)
@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev)
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
return 1;
default:
break;
@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(dev, 0x5A, btr);
}
/* Setup HT1000 SouthBridge Controller - Single Channel Only */
else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
pci_read_config_byte(dev, 0x5A, &btr);
btr &= ~0x40;
btr |= 0x3;
pci_write_config_byte(dev, 0x5A, btr);
}
return (dev->irq) ? dev->irq : 0;
}
@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
.channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
},{ /* 4 */
.name = "SvrWks HT1000",
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.init_dma = init_dma_svwks,
.channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
}
};
@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = {
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);

2
drivers/ide/ppc/pmac.c
View File

@ -1664,7 +1664,7 @@ static struct macio_driver pmac_ide_macio_driver =
};
static struct pci_device_id pmac_ide_pci_match[] = {
{ PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,

1
drivers/ide/setup-pci.c
View File

@ -229,6 +229,7 @@ second_chance_to_dma:
case PCI_DEVICE_ID_AMD_VIPER_7409:
case PCI_DEVICE_ID_CMD_643:
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
case PCI_DEVICE_ID_REVOLUTION:
simplex_stat = hwif->INB(dma_base + 2);
hwif->OUTB((simplex_stat&0x60),(dma_base + 2));
simplex_stat = hwif->INB(dma_base + 2);

3
drivers/md/md.c
View File

@ -623,6 +623,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
mddev->raid_disks = sb->raid_disks;
mddev->size = sb->size;
mddev->events = md_event(sb);
mddev->bitmap_offset = 0;
if (sb->state & (1<<MD_SB_CLEAN))
mddev->recovery_cp = MaxSector;
@ -938,6 +939,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
mddev->raid_disks = le32_to_cpu(sb->raid_disks);
mddev->size = le64_to_cpu(sb->size)/2;
mddev->events = le64_to_cpu(sb->events);
mddev->bitmap_offset = 0;
mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
memcpy(mddev->uuid, sb->set_uuid, 16);
@ -1824,6 +1826,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
fput(mddev->bitmap_file);
mddev->bitmap_file = NULL;
}
mddev->bitmap_offset = 0;
/*
* Free resources if final stop

7
drivers/net/8139cp.c
View File

@ -1897,6 +1897,7 @@ static int cp_resume (struct pci_dev *pdev)
{
struct net_device *dev;
struct cp_private *cp;
unsigned long flags;
dev = pci_get_drvdata (pdev);
cp = netdev_priv(dev);
@ -1910,6 +1911,12 @@ static int cp_resume (struct pci_dev *pdev)
cp_init_hw (cp);
netif_start_queue (dev);
spin_lock_irqsave (&cp->lock, flags);
mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
spin_unlock_irqrestore (&cp->lock, flags);
return 0;
}

52
drivers/net/dm9000.c
View File

@ -48,6 +48,10 @@
* net_device_stats
* * introduced tx_timeout function
* * reworked locking
*
* 01-Jul-2005 Ben Dooks <ben@simtec.co.uk>
* * fixed spinlock call without pointer
* * ensure spinlock is initialised
*/
#include <linux/module.h>
@ -148,7 +152,6 @@ static int dm9000_probe(struct device *);
static int dm9000_open(struct net_device *);
static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
static int dm9000_stop(struct net_device *);
static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
static void dm9000_timer(unsigned long);
@ -322,7 +325,7 @@ static void dm9000_timeout(struct net_device *dev)
/* Save previous register address */
reg_save = readb(db->io_addr);
spin_lock_irqsave(db->lock,flags);
spin_lock_irqsave(&db->lock,flags);
netif_stop_queue(dev);
dm9000_reset(db);
@ -333,7 +336,7 @@ static void dm9000_timeout(struct net_device *dev)
/* Restore previous register address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(db->lock,flags);
spin_unlock_irqrestore(&db->lock,flags);
}
@ -387,8 +390,6 @@ dm9000_probe(struct device *dev)
int i;
u32 id_val;
printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
/* Init network device */
ndev = alloc_etherdev(sizeof (struct board_info));
if (!ndev) {
@ -405,6 +406,8 @@ dm9000_probe(struct device *dev)
db = (struct board_info *) ndev->priv;
memset(db, 0, sizeof (*db));
spin_lock_init(&db->lock);
if (pdev->num_resources < 2) {
ret = -ENODEV;
goto out;
@ -541,7 +544,6 @@ dm9000_probe(struct device *dev)
ndev->stop = &dm9000_stop;
ndev->get_stats = &dm9000_get_stats;
ndev->set_multicast_list = &dm9000_hash_table;
ndev->do_ioctl = &dm9000_do_ioctl;
#ifdef DM9000_PROGRAM_EEPROM
program_eeprom(db);
@ -612,7 +614,7 @@ dm9000_open(struct net_device *dev)
/* set and active a timer process */
init_timer(&db->timer);
db->timer.expires = DM9000_TIMER_WUT * 2;
db->timer.expires = DM9000_TIMER_WUT;
db->timer.data = (unsigned long) dev;
db->timer.function = &dm9000_timer;
add_timer(&db->timer);
@ -845,15 +847,6 @@ dm9000_get_stats(struct net_device *dev)
return &db->stats;
}
/*
* Process the upper socket ioctl command
*/
static int
dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
PRINTK1("entering %s\n",__FUNCTION__);
return 0;
}
/*
* A periodic timer routine
@ -864,21 +857,11 @@ dm9000_timer(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
board_info_t *db = (board_info_t *) dev->priv;
u8 reg_save;
unsigned long flags;
PRINTK3("dm9000_timer()\n");
spin_lock_irqsave(db->lock,flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
mii_check_media(&db->mii, netif_msg_link(db), 0);
/* Restore previous register address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(db->lock,flags);
/* Set timer again */
db->timer.expires = DM9000_TIMER_WUT;
add_timer(&db->timer);
@ -1098,9 +1081,14 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
unsigned int reg_save;
int ret;
spin_lock_irqsave(&db->lock,flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
@ -1111,6 +1099,9 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
/* The read data keeps on REG_0D & REG_0E */
ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
/* restore the previous address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(&db->lock,flags);
return ret;
@ -1124,9 +1115,13 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
unsigned long reg_save;
spin_lock_irqsave(&db->lock,flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
@ -1138,6 +1133,9 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
udelay(500); /* Wait write complete */
iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
/* restore the previous address */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(&db->lock,flags);
}
@ -1202,6 +1200,8 @@ static struct device_driver dm9000_driver = {
static int __init
dm9000_init(void)
{
printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
return driver_register(&dm9000_driver); /* search board and register */
}

1
drivers/net/e1000/e1000_main.c
View File

@ -3789,6 +3789,7 @@ e1000_netpoll(struct net_device *netdev)
struct e1000_adapter *adapter = netdev_priv(netdev);
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev, NULL);
e1000_clean_tx_irq(adapter);
enable_irq(adapter->pdev->irq);
}
#endif

8
drivers/net/ioc3-eth.c
View File

@ -499,7 +499,7 @@ static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
while (ioc3_r_micr() & MICR_BUSY);
return ioc3_r_micr() & MIDR_DATA_MASK;
return ioc3_r_midr_r() & MIDR_DATA_MASK;
}
static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
@ -1291,7 +1291,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->features = NETIF_F_IP_CSUM;
#endif
ioc3_setup_duplex(ip);
sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
@ -1300,6 +1299,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto out_stop;
mii_check_media(&ip->mii, 1, 1);
ioc3_setup_duplex(ip);
vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
model = (sw_physid2 >> 4) & 0x3f;
@ -1524,7 +1524,7 @@ static void ioc3_get_drvinfo (struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct ioc3_private *ip = netdev_priv(dev);
strcpy (info->driver, IOC3_NAME);
strcpy (info->version, IOC3_VERSION);
strcpy (info->bus_info, pci_name(ip->pdev));
@ -1550,7 +1550,7 @@ static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
spin_lock_irq(&ip->ioc3_lock);
rc = mii_ethtool_sset(&ip->mii, cmd);
spin_unlock_irq(&ip->ioc3_lock);
return rc;
}

2
drivers/net/loopback.c
View File

@ -220,7 +220,7 @@ struct net_device loopback_dev = {
.ethtool_ops = &loopback_ethtool_ops,
};
/* Setup and register the of the LOOPBACK device. */
/* Setup and register the loopback device. */
int __init loopback_init(void)
{
struct net_device_stats *stats;

2
drivers/pci/hotplug/pciehp.h
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCIEHP_H

2
drivers/pci/hotplug/pciehp_core.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/pciehp_ctrl.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/pciehp_hpc.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/pciehp_pci.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/pciehprm.h
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/pciehprm_acpi.c
View File

@ -20,7 +20,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <dely.l.sy@intel.com>
* Send feedback to <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/pciehprm_nonacpi.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/pciehprm_nonacpi.h
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchp.h
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
#ifndef _SHPCHP_H

2
drivers/pci/hotplug/shpchp_core.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchp_ctrl.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchp_hpc.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchp_pci.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchprm.h
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchprm_acpi.c
View File

@ -20,7 +20,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <dely.l.sy@intel.com>
* Send feedback to <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchprm_legacy.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchprm_legacy.h
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchprm_nonacpi.c
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

2
drivers/pci/hotplug/shpchprm_nonacpi.h
View File

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

5
drivers/pci/msi.c
View File

@ -453,7 +453,7 @@ static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
}
}
static void disable_msi_mode(struct pci_dev *dev, int pos, int type)
void disable_msi_mode(struct pci_dev *dev, int pos, int type)
{
u16 control;
@ -699,6 +699,9 @@ int pci_enable_msi(struct pci_dev* dev)
if (!pci_msi_enable || !dev)
return status;
if (dev->no_msi)
return status;
temp = dev->irq;
if ((status = msi_init()) < 0)

6
drivers/pci/pci.h
View File

@ -47,6 +47,12 @@ extern int pci_msi_quirk;
#define pci_msi_quirk 0
#endif
#ifdef CONFIG_PCI_MSI
void disable_msi_mode(struct pci_dev *dev, int pos, int type);
#else
static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
#endif
extern int pcie_mch_quirk;
extern struct device_attribute pci_dev_attrs[];
extern struct class_device_attribute class_device_attr_cpuaffinity;

21
drivers/pci/quirks.c
View File

@ -1291,6 +1291,27 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quir
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
/*
* It's possible for the MSI to get corrupted if shpc and acpi
* are used together on certain PXH-based systems.
*/
static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
{
disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
PCI_CAP_ID_MSI);
dev->no_msi = 1;
printk(KERN_WARNING "PCI: PXH quirk detected, "
"disabling MSI for SHPC device\n");
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;

2
drivers/pnp/card.c
View File

@ -312,6 +312,8 @@ found:
if (drv->link.driver.probe) {
if (drv->link.driver.probe(&dev->dev)) {
dev->dev.driver = NULL;
dev->card_link = NULL;
up_write(&dev->dev.bus->subsys.rwsem);
return NULL;
}
}

48
drivers/scsi/dc395x.c
View File

@ -183,7 +183,7 @@
* cross a page boundy.
*/
#define SEGMENTX_LEN (sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY)
#define VIRTX_LEN (sizeof(void *) * DC395x_MAX_SG_LISTENTRY)
struct SGentry {
u32 address; /* bus! address */
@ -235,7 +235,6 @@ struct ScsiReqBlk {
u8 sg_count; /* No of HW sg entries for this request */
u8 sg_index; /* Index of HW sg entry for this request */
u32 total_xfer_length; /* Total number of bytes remaining to be transfered */
void **virt_map;
unsigned char *virt_addr; /* Virtual address of current transfer position */
/*
@ -1022,14 +1021,14 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
reqlen, cmd->request_buffer, cmd->use_sg,
srb->sg_count);
srb->virt_addr = page_address(sl->page);
for (i = 0; i < srb->sg_count; i++) {
u32 seglen = (u32)sg_dma_len(sl + i);
sgp[i].address = (u32)sg_dma_address(sl + i);
u32 busaddr = (u32)sg_dma_address(&sl[i]);
u32 seglen = (u32)sl[i].length;
sgp[i].address = busaddr;
sgp[i].length = seglen;
srb->total_xfer_length += seglen;
srb->virt_map[i] = kmap(sl[i].page);
}
srb->virt_addr = srb->virt_map[0];
sgp += srb->sg_count - 1;
/*
@ -1976,7 +1975,6 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
int segment = cmd->use_sg;
u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
struct SGentry *psge = srb->segment_x + srb->sg_index;
void **virt = srb->virt_map;
dprintkdbg(DBG_0,
"sg_update_list: Transfered %i of %i bytes, %i remain\n",
@ -2016,16 +2014,16 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
/* We have to walk the scatterlist to find it */
sg = (struct scatterlist *)cmd->request_buffer;
idx = 0;
while (segment--) {
unsigned long mask =
~((unsigned long)sg->length - 1) & PAGE_MASK;
if ((sg_dma_address(sg) & mask) == (psge->address & mask)) {
srb->virt_addr = virt[idx] + (psge->address & ~PAGE_MASK);
srb->virt_addr = (page_address(sg->page)
+ psge->address -
(psge->address & PAGE_MASK));
return;
}
++sg;
++idx;
}
dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n");
@ -2151,7 +2149,7 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
}
/*
* calculate all the residue data that not yet transfered
* calculate all the residue data that not yet tranfered
* SCSI transfer counter + left in SCSI FIFO data
*
* .....TRM_S1040_SCSI_COUNTER (24bits)
@ -3269,7 +3267,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
struct scsi_cmnd *cmd = srb->cmd;
enum dma_data_direction dir = cmd->sc_data_direction;
if (cmd->use_sg && dir != PCI_DMA_NONE) {
int i;
/* unmap DC395x SG list */
dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
srb->sg_bus_addr, SEGMENTX_LEN);
@ -3279,8 +3276,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
cmd->use_sg, cmd->request_buffer);
/* unmap the sg segments */
for (i = 0; i < srb->sg_count; i++)
kunmap(virt_to_page(srb->virt_map[i]));
pci_unmap_sg(acb->dev,
(struct scatterlist *)cmd->request_buffer,
cmd->use_sg, dir);
@ -3327,7 +3322,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (cmd->use_sg) {
struct scatterlist* sg = (struct scatterlist *)cmd->request_buffer;
ptr = (struct ScsiInqData *)(srb->virt_map[0] + sg->offset);
ptr = (struct ScsiInqData *)(page_address(sg->page) + sg->offset);
} else {
ptr = (struct ScsiInqData *)(cmd->request_buffer);
}
@ -4262,9 +4257,8 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
kfree(acb->srb_array[i].segment_x);
vfree(acb->srb_array[0].virt_map);
if (acb->srb_array[i].segment_x)
kfree(acb->srb_array[i].segment_x);
}
@ -4280,12 +4274,9 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
int srb_idx = 0;
unsigned i = 0;
struct SGentry *ptr;
void **virt_array;
for (i = 0; i < DC395x_MAX_SRB_CNT; i++) {
for (i = 0; i < DC395x_MAX_SRB_CNT; i++)
acb->srb_array[i].segment_x = NULL;
acb->srb_array[i].virt_map = NULL;
}
dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
while (pages--) {
@ -4306,19 +4297,6 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
ptr + (i * DC395x_MAX_SG_LISTENTRY);
else
dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
virt_array = vmalloc((DC395x_MAX_SRB_CNT + 1) * DC395x_MAX_SG_LISTENTRY * sizeof(void*));
if (!virt_array) {
adapter_sg_tables_free(acb);
return 1;
}
for (i = 0; i < DC395x_MAX_SRB_CNT + 1; i++) {
acb->srb_array[i].virt_map = virt_array;
virt_array += DC395x_MAX_SG_LISTENTRY;
}
return 0;
}

1
drivers/serial/sn_console.c
View File

@ -1093,6 +1093,7 @@ int __init sn_serial_console_early_setup(void)
return -1;
sal_console_port.sc_ops = &poll_ops;
spin_lock_init(&sal_console_port.sc_port.lock);
early_sn_setup(); /* Find SAL entry points */
register_console(&sal_console_early);

21
drivers/usb/input/wacom.c
View File

@ -342,9 +342,6 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
goto exit;
}
x = le16_to_cpu(*(__le16 *) &data[2]);
y = le16_to_cpu(*(__le16 *) &data[4]);
input_regs(dev, regs);
if (data[1] & 0x10) { /* in prox */
@ -373,15 +370,17 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
}
}
if (data[1] & 0x80) {
if (data[1] & 0x90) {
x = le16_to_cpu(*(__le16 *) &data[2]);
y = le16_to_cpu(*(__le16 *) &data[4]);
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
}
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
}
}
input_report_key(dev, wacom->tool[0], data[1] & 0x10);
@ -568,7 +567,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
/* Cintiq doesn't send data when RDY bit isn't set */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
return;
goto exit;
if (wacom->features->type >= INTUOS3) {
input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));

4
drivers/usb/mon/mon_main.c
View File

@ -2,6 +2,8 @@
* The USB Monitor, inspired by Dave Harding's USBMon.
*
* mon_main.c: Main file, module initiation and exit, registrations, etc.
*
* Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#include <linux/kernel.h>
@ -311,7 +313,7 @@ static int __init mon_init(void)
mondir = debugfs_create_dir("usbmon", NULL);
if (IS_ERR(mondir)) {
printk(KERN_NOTICE TAG ": debugs is not available\n");
printk(KERN_NOTICE TAG ": debugfs is not available\n");
return -ENODEV;
}
if (mondir == NULL) {

2
drivers/usb/mon/usb_mon.h
View File

@ -1,5 +1,7 @@
/*
* The USB Monitor, inspired by Dave Harding's USBMon.
*
* Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#ifndef __USB_MON_H

4
drivers/video/fbmem.c
View File

@ -628,7 +628,7 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
int
fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
{
int err;
int err, flags = info->flags;
if (var->activate & FB_ACTIVATE_INV_MODE) {
struct fb_videomode mode1, mode2;
@ -682,7 +682,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
!list_empty(&info->modelist))
err = fb_add_videomode(&mode, &info->modelist);
if (!err && info->flags & FBINFO_MISC_USEREVENT) {
if (!err && (flags & FBINFO_MISC_USEREVENT)) {
struct fb_event event;
info->flags &= ~FBINFO_MISC_USEREVENT;

50
drivers/video/intelfb/intelfbdrv.c
View File

@ -583,23 +583,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
}
/* Map the fb and MMIO regions */
dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
(dinfo->aperture.physical, dinfo->aperture.size);
if (!dinfo->aperture.virtual) {
ERR_MSG("Cannot remap FB region.\n");
cleanup(dinfo);
return -ENODEV;
}
dinfo->mmio_base =
(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
INTEL_REG_SIZE);
if (!dinfo->mmio_base) {
ERR_MSG("Cannot remap MMIO region.\n");
cleanup(dinfo);
return -ENODEV;
}
/* Get the chipset info. */
dinfo->pci_chipset = pdev->device;
@ -630,9 +613,15 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
dinfo->accel = 0;
}
if (MB(voffset) < stolen_size)
offset = (stolen_size >> 12);
else
offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
/* Framebuffer parameters - Use all the stolen memory if >= vram */
if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) + MB(vram))) {
dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
dinfo->fb.offset = 0;
dinfo->fbmem_gart = 0;
} else {
dinfo->fb.size = MB(vram);
@ -663,11 +652,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
}
if (MB(voffset) < stolen_size)
offset = (stolen_size >> 12);
else
offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
/* set the mem offsets - set them after the already used pages */
if (dinfo->accel) {
dinfo->ring.offset = offset + gtt_info.current_memory;
@ -682,6 +666,26 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
+ (dinfo->cursor.size >> 12);
}
/* Map the fb and MMIO regions */
/* ioremap only up to the end of used aperture */
dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
(dinfo->aperture.physical, (dinfo->fb.offset << 12)
+ dinfo->fb.size);
if (!dinfo->aperture.virtual) {
ERR_MSG("Cannot remap FB region.\n");
cleanup(dinfo);
return -ENODEV;
}
dinfo->mmio_base =
(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
INTEL_REG_SIZE);
if (!dinfo->mmio_base) {
ERR_MSG("Cannot remap MMIO region.\n");
cleanup(dinfo);
return -ENODEV;
}
/* Allocate memories (which aren't stolen) */
if (dinfo->accel) {
if (!(dinfo->gtt_ring_mem =

2
drivers/video/radeonfb.c
View File

@ -80,7 +80,7 @@
#include <video/radeon.h>
#include <linux/radeonfb.h>
#define DEBUG 1
#define DEBUG 0
#if DEBUG
#define RTRACE printk

2
drivers/w1/w1.c
View File

@ -593,7 +593,7 @@ void w1_search(struct w1_master *dev, w1_slave_found_callback cb)
* Return 0 - device(s) present, 1 - no devices present.
*/
if (w1_reset_bus(dev)) {
dev_info(&dev->dev, "No devices present on the wire.\n");
dev_dbg(&dev->dev, "No devices present on the wire.\n");
break;
}

6
fs/cifs/CHANGES
View File

@ -1,3 +1,9 @@
Version 1.35
------------
Add writepage performance improvements. Fix path name conversions
for long filenames on mounts which were done with "mapchars" mount option
specified.
Version 1.34
------------
Fix error mapping of the TOO_MANY_LINKS (hardlinks) case.

3
fs/cifs/cifssmb.c
View File

@ -2602,6 +2602,9 @@ int CIFSFindNext(const int xid, struct cifsTconInfo *tcon,
if(name_len < PATH_MAX) {
memcpy(pSMB->ResumeFileName, psrch_inf->presume_name, name_len);
byte_count += name_len;
/* 14 byte parm len above enough for 2 byte null terminator */
pSMB->ResumeFileName[name_len] = 0;
pSMB->ResumeFileName[name_len+1] = 0;
} else {
rc = -EINVAL;
goto FNext2_err_exit;

1
fs/cifs/misc.c
View File

@ -611,6 +611,7 @@ cifsConvertToUCS(__le16 * target, const char *source, int maxlen,
src_char = source[i];
switch (src_char) {
case 0:
target[j] = 0;
goto ctoUCS_out;
case ':':
target[j] = cpu_to_le16(UNI_COLON);

2
fs/inotify.c
View File

@ -402,7 +402,7 @@ static struct inotify_watch *create_watch(struct inotify_device *dev,
return ERR_PTR(ret);
}
dev->last_wd = ret;
dev->last_wd = watch->wd;
watch->mask = mask;
atomic_set(&watch->count, 0);
INIT_LIST_HEAD(&watch->d_list);

4
fs/jfs/inode.c
View File

@ -128,6 +128,10 @@ void jfs_delete_inode(struct inode *inode)
{
jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
if (is_bad_inode(inode) ||
(JFS_IP(inode)->fileset != cpu_to_le32(FILESYSTEM_I)))
return;
if (test_cflag(COMMIT_Freewmap, inode))
jfs_free_zero_link(inode);

36
fs/jfs/jfs_logmgr.c
View File

@ -191,7 +191,7 @@ static int lbmIOWait(struct lbuf * bp, int flag);
static bio_end_io_t lbmIODone;
static void lbmStartIO(struct lbuf * bp);
static void lmGCwrite(struct jfs_log * log, int cant_block);
static int lmLogSync(struct jfs_log * log, int nosyncwait);
static int lmLogSync(struct jfs_log * log, int hard_sync);
@ -915,19 +915,17 @@ static void lmPostGC(struct lbuf * bp)
* if new sync address is available
* (normally the case if sync() is executed by back-ground
* process).
* if not, explicitly run jfs_blogsync() to initiate
* getting of new sync address.
* calculate new value of i_nextsync which determines when
* this code is called again.
*
* PARAMETERS: log - log structure
* nosyncwait - 1 if called asynchronously
* hard_sync - 1 to force all metadata to be written
*
* RETURN: 0
*
* serialization: LOG_LOCK() held on entry/exit
*/
static int lmLogSync(struct jfs_log * log, int nosyncwait)
static int lmLogSync(struct jfs_log * log, int hard_sync)
{
int logsize;
int written; /* written since last syncpt */
@ -941,11 +939,18 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
unsigned long flags;
/* push dirty metapages out to disk */
list_for_each_entry(sbi, &log->sb_list, log_list) {
filemap_flush(sbi->ipbmap->i_mapping);
filemap_flush(sbi->ipimap->i_mapping);
filemap_flush(sbi->direct_inode->i_mapping);
}
if (hard_sync)
list_for_each_entry(sbi, &log->sb_list, log_list) {
filemap_fdatawrite(sbi->ipbmap->i_mapping);
filemap_fdatawrite(sbi->ipimap->i_mapping);
filemap_fdatawrite(sbi->direct_inode->i_mapping);
}
else
list_for_each_entry(sbi, &log->sb_list, log_list) {
filemap_flush(sbi->ipbmap->i_mapping);
filemap_flush(sbi->ipimap->i_mapping);
filemap_flush(sbi->direct_inode->i_mapping);
}
/*
* forward syncpt
@ -1021,10 +1026,6 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
/* next syncpt trigger = written + more */
log->nextsync = written + more;
/* return if lmLogSync() from outside of transaction, e.g., sync() */
if (nosyncwait)
return lsn;
/* if number of bytes written from last sync point is more
* than 1/4 of the log size, stop new transactions from
* starting until all current transactions are completed
@ -1049,11 +1050,12 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
*
* FUNCTION: write log SYNCPT record for specified log
*
* PARAMETERS: log - log structure
* PARAMETERS: log - log structure
* hard_sync - set to 1 to force metadata to be written
*/
void jfs_syncpt(struct jfs_log *log)
void jfs_syncpt(struct jfs_log *log, int hard_sync)
{ LOG_LOCK(log);
lmLogSync(log, 1);
lmLogSync(log, hard_sync);
LOG_UNLOCK(log);
}

2
fs/jfs/jfs_logmgr.h
View File

@ -510,6 +510,6 @@ extern int lmLogFormat(struct jfs_log *log, s64 logAddress, int logSize);
extern int lmGroupCommit(struct jfs_log *, struct tblock *);
extern int jfsIOWait(void *);
extern void jfs_flush_journal(struct jfs_log * log, int wait);
extern void jfs_syncpt(struct jfs_log *log);
extern void jfs_syncpt(struct jfs_log *log, int hard_sync);
#endif /* _H_JFS_LOGMGR */

12
fs/jfs/jfs_txnmgr.c
View File

@ -552,6 +552,11 @@ void txEnd(tid_t tid)
* synchronize with logsync barrier
*/
if (test_bit(log_SYNCBARRIER, &log->flag)) {
TXN_UNLOCK();
/* write dirty metadata & forward log syncpt */
jfs_syncpt(log, 1);
jfs_info("log barrier off: 0x%x", log->lsn);
/* enable new transactions start */
@ -560,11 +565,6 @@ void txEnd(tid_t tid)
/* wakeup all waitors for logsync barrier */
TXN_WAKEUP(&log->syncwait);
TXN_UNLOCK();
/* forward log syncpt */
jfs_syncpt(log);
goto wakeup;
}
}
@ -657,7 +657,9 @@ struct tlock *txLock(tid_t tid, struct inode *ip, struct metapage * mp,
/* only anonymous txn.
* Remove from anon_list
*/
TXN_LOCK();
list_del_init(&jfs_ip->anon_inode_list);
TXN_UNLOCK();
}
jfs_ip->atlhead = tlck->next;
} else {

4
fs/jfs/super.c
View File

@ -114,6 +114,8 @@ static void jfs_destroy_inode(struct inode *inode)
{
struct jfs_inode_info *ji = JFS_IP(inode);
BUG_ON(!list_empty(&ji->anon_inode_list));
spin_lock_irq(&ji->ag_lock);
if (ji->active_ag != -1) {
struct bmap *bmap = JFS_SBI(inode->i_sb)->bmap;
@ -531,7 +533,7 @@ static int jfs_sync_fs(struct super_block *sb, int wait)
/* log == NULL indicates read-only mount */
if (log) {
jfs_flush_journal(log, wait);
jfs_syncpt(log);
jfs_syncpt(log, 0);
}
return 0;

3
fs/namei.c
View File

@ -2216,7 +2216,8 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
error = vfs_rename_other(old_dir,old_dentry,new_dir,new_dentry);
if (!error) {
const char *new_name = old_dentry->d_name.name;
fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir, new_dentry->d_inode);
fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir,
new_dentry->d_inode, old_dentry->d_inode);
}
fsnotify_oldname_free(old_name);

27
fs/nfs/dir.c
View File

@ -182,14 +182,16 @@ int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page *page)
/* We requested READDIRPLUS, but the server doesn't grok it */
if (error == -ENOTSUPP && desc->plus) {
NFS_SERVER(inode)->caps &= ~NFS_CAP_READDIRPLUS;
NFS_FLAGS(inode) &= ~NFS_INO_ADVISE_RDPLUS;
clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
desc->plus = 0;
goto again;
}
goto error;
}
SetPageUptodate(page);
NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
spin_lock(&inode->i_lock);
NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
spin_unlock(&inode->i_lock);
/* Ensure consistent page alignment of the data.
* Note: assumes we have exclusive access to this mapping either
* through inode->i_sem or some other mechanism.
@ -462,7 +464,9 @@ int uncached_readdir(nfs_readdir_descriptor_t *desc, void *dirent,
page,
NFS_SERVER(inode)->dtsize,
desc->plus);
NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
spin_lock(&inode->i_lock);
NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
spin_unlock(&inode->i_lock);
desc->page = page;
desc->ptr = kmap(page); /* matching kunmap in nfs_do_filldir */
if (desc->error >= 0) {
@ -545,7 +549,7 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
break;
}
if (res == -ETOOSMALL && desc->plus) {
NFS_FLAGS(inode) &= ~NFS_INO_ADVISE_RDPLUS;
clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
nfs_zap_caches(inode);
desc->plus = 0;
desc->entry->eof = 0;
@ -608,7 +612,7 @@ static inline int nfs_check_verifier(struct inode *dir, struct dentry *dentry)
{
if (IS_ROOT(dentry))
return 1;
if ((NFS_FLAGS(dir) & NFS_INO_INVALID_ATTR) != 0
if ((NFS_I(dir)->cache_validity & NFS_INO_INVALID_ATTR) != 0
|| nfs_attribute_timeout(dir))
return 0;
return nfs_verify_change_attribute(dir, (unsigned long)dentry->d_fsdata);
@ -1575,11 +1579,12 @@ out:
int nfs_access_get_cached(struct inode *inode, struct rpc_cred *cred, struct nfs_access_entry *res)
{
struct nfs_access_entry *cache = &NFS_I(inode)->cache_access;
struct nfs_inode *nfsi = NFS_I(inode);
struct nfs_access_entry *cache = &nfsi->cache_access;
if (cache->cred != cred
|| time_after(jiffies, cache->jiffies + NFS_ATTRTIMEO(inode))
|| (NFS_FLAGS(inode) & NFS_INO_INVALID_ACCESS))
|| (nfsi->cache_validity & NFS_INO_INVALID_ACCESS))
return -ENOENT;
memcpy(res, cache, sizeof(*res));
return 0;
@ -1587,14 +1592,18 @@ int nfs_access_get_cached(struct inode *inode, struct rpc_cred *cred, struct nfs
void nfs_access_add_cache(struct inode *inode, struct nfs_access_entry *set)
{
struct nfs_access_entry *cache = &NFS_I(inode)->cache_access;
struct nfs_inode *nfsi = NFS_I(inode);
struct nfs_access_entry *cache = &nfsi->cache_access;
if (cache->cred != set->cred) {
if (cache->cred)
put_rpccred(cache->cred);
cache->cred = get_rpccred(set->cred);
}
NFS_FLAGS(inode) &= ~NFS_INO_INVALID_ACCESS;
/* FIXME: replace current access_cache BKL reliance with inode->i_lock */
spin_lock(&inode->i_lock);
nfsi->cache_validity &= ~NFS_INO_INVALID_ACCESS;
spin_unlock(&inode->i_lock);
cache->jiffies = set->jiffies;
cache->mask = set->mask;
}

5
fs/nfs/file.c
View File

@ -134,9 +134,10 @@ nfs_file_release(struct inode *inode, struct file *filp)
*/
static int nfs_revalidate_file(struct inode *inode, struct file *filp)
{
struct nfs_inode *nfsi = NFS_I(inode);
int retval = 0;
if ((NFS_FLAGS(inode) & NFS_INO_REVAL_PAGECACHE) || nfs_attribute_timeout(inode))
if ((nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE) || nfs_attribute_timeout(inode))
retval = __nfs_revalidate_inode(NFS_SERVER(inode), inode);
nfs_revalidate_mapping(inode, filp->f_mapping);
return 0;
@ -164,7 +165,7 @@ static int nfs_revalidate_file_size(struct inode *inode, struct file *filp)
goto force_reval;
if (nfsi->npages != 0)
return 0;
if (!(NFS_FLAGS(inode) & NFS_INO_REVAL_PAGECACHE) && !nfs_attribute_timeout(inode))
if (!(nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE) && !nfs_attribute_timeout(inode))
return 0;
force_reval:
return __nfs_revalidate_inode(server, inode);

197
fs/nfs/inode.c
View File

@ -615,14 +615,18 @@ nfs_zap_caches(struct inode *inode)
struct nfs_inode *nfsi = NFS_I(inode);
int mode = inode->i_mode;
spin_lock(&inode->i_lock);
NFS_ATTRTIMEO(inode) = NFS_MINATTRTIMEO(inode);
NFS_ATTRTIMEO_UPDATE(inode) = jiffies;
memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode)));
if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))
nfsi->flags |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
else
nfsi->flags |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
spin_unlock(&inode->i_lock);
}
static void nfs_zap_acl_cache(struct inode *inode)
@ -632,7 +636,9 @@ static void nfs_zap_acl_cache(struct inode *inode)
clear_acl_cache = NFS_PROTO(inode)->clear_acl_cache;
if (clear_acl_cache != NULL)
clear_acl_cache(inode);
NFS_I(inode)->flags &= ~NFS_INO_INVALID_ACL;
spin_lock(&inode->i_lock);
NFS_I(inode)->cache_validity &= ~NFS_INO_INVALID_ACL;
spin_unlock(&inode->i_lock);
}
/*
@ -739,7 +745,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr)
inode->i_fop = &nfs_dir_operations;
if (nfs_server_capable(inode, NFS_CAP_READDIRPLUS)
&& fattr->size <= NFS_LIMIT_READDIRPLUS)
NFS_FLAGS(inode) |= NFS_INO_ADVISE_RDPLUS;
set_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
} else if (S_ISLNK(inode->i_mode))
inode->i_op = &nfs_symlink_inode_operations;
else
@ -814,55 +820,84 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr)
nfs_wb_all(inode);
}
error = NFS_PROTO(inode)->setattr(dentry, &fattr, attr);
if (error == 0) {
if (error == 0)
nfs_refresh_inode(inode, &fattr);
nfs_end_data_update(inode);
unlock_kernel();
return error;
}
/**
* nfs_setattr_update_inode - Update inode metadata after a setattr call.
* @inode: pointer to struct inode
* @attr: pointer to struct iattr
*
* Note: we do this in the *proc.c in order to ensure that
* it works for things like exclusive creates too.
*/
void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr)
{
if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0) {
if ((attr->ia_valid & ATTR_MODE) != 0) {
int mode;
mode = inode->i_mode & ~S_IALLUGO;
mode |= attr->ia_mode & S_IALLUGO;
int mode = attr->ia_mode & S_IALLUGO;
mode |= inode->i_mode & ~S_IALLUGO;
inode->i_mode = mode;
}
if ((attr->ia_valid & ATTR_UID) != 0)
inode->i_uid = attr->ia_uid;
if ((attr->ia_valid & ATTR_GID) != 0)
inode->i_gid = attr->ia_gid;
if ((attr->ia_valid & ATTR_SIZE) != 0) {
inode->i_size = attr->ia_size;
vmtruncate(inode, attr->ia_size);
}
spin_lock(&inode->i_lock);
NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
spin_unlock(&inode->i_lock);
}
if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0)
NFS_FLAGS(inode) |= NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
nfs_end_data_update(inode);
unlock_kernel();
return error;
if ((attr->ia_valid & ATTR_SIZE) != 0) {
inode->i_size = attr->ia_size;
vmtruncate(inode, attr->ia_size);
}
}
static int nfs_wait_schedule(void *word)
{
if (signal_pending(current))
return -ERESTARTSYS;
schedule();
return 0;
}
/*
* Wait for the inode to get unlocked.
* (Used for NFS_INO_LOCKED and NFS_INO_REVALIDATING).
*/
static int
nfs_wait_on_inode(struct inode *inode, int flag)
static int nfs_wait_on_inode(struct inode *inode)
{
struct rpc_clnt *clnt = NFS_CLIENT(inode);
struct nfs_inode *nfsi = NFS_I(inode);
sigset_t oldmask;
int error;
if (!(NFS_FLAGS(inode) & flag))
return 0;
atomic_inc(&inode->i_count);
error = nfs_wait_event(clnt, nfsi->nfs_i_wait,
!(NFS_FLAGS(inode) & flag));
rpc_clnt_sigmask(clnt, &oldmask);
error = wait_on_bit_lock(&nfsi->flags, NFS_INO_REVALIDATING,
nfs_wait_schedule, TASK_INTERRUPTIBLE);
rpc_clnt_sigunmask(clnt, &oldmask);
iput(inode);
return error;
}
static void nfs_wake_up_inode(struct inode *inode)
{
struct nfs_inode *nfsi = NFS_I(inode);
clear_bit(NFS_INO_REVALIDATING, &nfsi->flags);
smp_mb__after_clear_bit();
wake_up_bit(&nfsi->flags, NFS_INO_REVALIDATING);
}
int nfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
{
struct inode *inode = dentry->d_inode;
struct nfs_inode *nfsi = NFS_I(inode);
int need_atime = nfsi->flags & NFS_INO_INVALID_ATIME;
int need_atime = NFS_I(inode)->cache_validity & NFS_INO_INVALID_ATIME;
int err;
if (__IS_FLG(inode, MS_NOATIME))
@ -1008,7 +1043,7 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
struct nfs_fattr fattr;
struct nfs_inode *nfsi = NFS_I(inode);
unsigned long verifier;
unsigned int flags;
unsigned long cache_validity;
dfprintk(PAGECACHE, "NFS: revalidating (%s/%Ld)\n",
inode->i_sb->s_id, (long long)NFS_FILEID(inode));
@ -1019,18 +1054,19 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
if (NFS_STALE(inode))
goto out_nowait;
while (NFS_REVALIDATING(inode)) {
status = nfs_wait_on_inode(inode, NFS_INO_REVALIDATING);
if (status < 0)
goto out_nowait;
if (NFS_ATTRTIMEO(inode) == 0)
continue;
if (NFS_FLAGS(inode) & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ATIME))
continue;
status = NFS_STALE(inode) ? -ESTALE : 0;
goto out_nowait;
status = nfs_wait_on_inode(inode);
if (status < 0)
goto out;
if (NFS_STALE(inode)) {
status = -ESTALE;
/* Do we trust the cached ESTALE? */
if (NFS_ATTRTIMEO(inode) != 0) {
if (nfsi->cache_validity & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ATIME)) {
/* no */
} else
goto out;
}
}
NFS_FLAGS(inode) |= NFS_INO_REVALIDATING;
/* Protect against RPC races by saving the change attribute */
verifier = nfs_save_change_attribute(inode);
@ -1042,7 +1078,7 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
if (status == -ESTALE) {
nfs_zap_caches(inode);
if (!S_ISDIR(inode->i_mode))
NFS_FLAGS(inode) |= NFS_INO_STALE;
set_bit(NFS_INO_STALE, &NFS_FLAGS(inode));
}
goto out;
}
@ -1054,25 +1090,30 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
(long long)NFS_FILEID(inode), status);
goto out;
}
flags = nfsi->flags;
nfsi->flags &= ~NFS_INO_REVAL_PAGECACHE;
spin_lock(&inode->i_lock);
cache_validity = nfsi->cache_validity;
nfsi->cache_validity &= ~NFS_INO_REVAL_PAGECACHE;
/*
* We may need to keep the attributes marked as invalid if
* we raced with nfs_end_attr_update().
*/
if (verifier == nfsi->cache_change_attribute)
nfsi->flags &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME);
/* Do the page cache invalidation */
nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME);
spin_unlock(&inode->i_lock);
nfs_revalidate_mapping(inode, inode->i_mapping);
if (flags & NFS_INO_INVALID_ACL)
if (cache_validity & NFS_INO_INVALID_ACL)
nfs_zap_acl_cache(inode);
dfprintk(PAGECACHE, "NFS: (%s/%Ld) revalidation complete\n",
inode->i_sb->s_id,
(long long)NFS_FILEID(inode));
out:
NFS_FLAGS(inode) &= ~NFS_INO_REVALIDATING;
wake_up(&nfsi->nfs_i_wait);
out:
nfs_wake_up_inode(inode);
out_nowait:
unlock_kernel();
return status;
@ -1096,7 +1137,7 @@ int nfs_attribute_timeout(struct inode *inode)
*/
int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
{
if (!(NFS_FLAGS(inode) & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA))
if (!(NFS_I(inode)->cache_validity & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA))
&& !nfs_attribute_timeout(inode))
return NFS_STALE(inode) ? -ESTALE : 0;
return __nfs_revalidate_inode(server, inode);
@ -1111,19 +1152,23 @@ void nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping)
{
struct nfs_inode *nfsi = NFS_I(inode);
if (nfsi->flags & NFS_INO_INVALID_DATA) {
if (nfsi->cache_validity & NFS_INO_INVALID_DATA) {
if (S_ISREG(inode->i_mode)) {
if (filemap_fdatawrite(mapping) == 0)
filemap_fdatawait(mapping);
nfs_wb_all(inode);
}
invalidate_inode_pages2(mapping);
nfsi->flags &= ~NFS_INO_INVALID_DATA;
spin_lock(&inode->i_lock);
nfsi->cache_validity &= ~NFS_INO_INVALID_DATA;
if (S_ISDIR(inode->i_mode)) {
memset(nfsi->cookieverf, 0, sizeof(nfsi->cookieverf));
/* This ensures we revalidate child dentries */
nfsi->cache_change_attribute++;
}
spin_unlock(&inode->i_lock);
dfprintk(PAGECACHE, "NFS: (%s/%Ld) data cache invalidated\n",
inode->i_sb->s_id,
(long long)NFS_FILEID(inode));
@ -1153,10 +1198,12 @@ void nfs_end_data_update(struct inode *inode)
if (!nfs_have_delegation(inode, FMODE_READ)) {
/* Mark the attribute cache for revalidation */
nfsi->flags |= NFS_INO_INVALID_ATTR;
spin_lock(&inode->i_lock);
nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
/* Directories and symlinks: invalidate page cache too */
if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
nfsi->flags |= NFS_INO_INVALID_DATA;
nfsi->cache_validity |= NFS_INO_INVALID_DATA;
spin_unlock(&inode->i_lock);
}
nfsi->cache_change_attribute ++;
atomic_dec(&nfsi->data_updates);
@ -1181,6 +1228,8 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
if (nfs_have_delegation(inode, FMODE_READ))
return 0;
spin_lock(&inode->i_lock);
/* Are we in the process of updating data on the server? */
data_unstable = nfs_caches_unstable(inode);
@ -1189,19 +1238,23 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
&& nfsi->change_attr == fattr->pre_change_attr)
nfsi->change_attr = fattr->change_attr;
if (nfsi->change_attr != fattr->change_attr) {
nfsi->flags |= NFS_INO_INVALID_ATTR;
nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (!data_unstable)
nfsi->flags |= NFS_INO_REVAL_PAGECACHE;
nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE;
}
}
if ((fattr->valid & NFS_ATTR_FATTR) == 0)
if ((fattr->valid & NFS_ATTR_FATTR) == 0) {
spin_unlock(&inode->i_lock);
return 0;
}
/* Has the inode gone and changed behind our back? */
if (nfsi->fileid != fattr->fileid
|| (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT))
|| (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) {
spin_unlock(&inode->i_lock);
return -EIO;
}
cur_size = i_size_read(inode);
new_isize = nfs_size_to_loff_t(fattr->size);
@ -1216,30 +1269,31 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
/* Verify a few of the more important attributes */
if (!timespec_equal(&inode->i_mtime, &fattr->mtime)) {
nfsi->flags |= NFS_INO_INVALID_ATTR;
nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (!data_unstable)
nfsi->flags |= NFS_INO_REVAL_PAGECACHE;
nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE;
}
if (cur_size != new_isize) {
nfsi->flags |= NFS_INO_INVALID_ATTR;
nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (nfsi->npages == 0)
nfsi->flags |= NFS_INO_REVAL_PAGECACHE;
nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE;
}
/* Have any file permissions changed? */
if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)
|| inode->i_uid != fattr->uid
|| inode->i_gid != fattr->gid)
nfsi->flags |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS | NFS_INO_INVALID_ACL;
nfsi->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS | NFS_INO_INVALID_ACL;
/* Has the link count changed? */
if (inode->i_nlink != fattr->nlink)
nfsi->flags |= NFS_INO_INVALID_ATTR;
nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (!timespec_equal(&inode->i_atime, &fattr->atime))
nfsi->flags |= NFS_INO_INVALID_ATIME;
nfsi->cache_validity |= NFS_INO_INVALID_ATIME;
nfsi->read_cache_jiffies = fattr->timestamp;
spin_unlock(&inode->i_lock);
return 0;
}
@ -1278,11 +1332,15 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign
goto out_err;
}
spin_lock(&inode->i_lock);
/*
* Make sure the inode's type hasn't changed.
*/
if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT))
if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) {
spin_unlock(&inode->i_lock);
goto out_changed;
}
/*
* Update the read time so we don't revalidate too often.
@ -1373,8 +1431,9 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign
|| S_ISLNK(inode->i_mode)))
invalid &= ~NFS_INO_INVALID_DATA;
if (!nfs_have_delegation(inode, FMODE_READ))
nfsi->flags |= invalid;
nfsi->cache_validity |= invalid;
spin_unlock(&inode->i_lock);
return 0;
out_changed:
/*
@ -1391,7 +1450,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign
*/
nfs_invalidate_inode(inode);
out_err:
NFS_FLAGS(inode) |= NFS_INO_STALE;
set_bit(NFS_INO_STALE, &NFS_FLAGS(inode));
return -ESTALE;
}
@ -1950,7 +2009,8 @@ static struct inode *nfs_alloc_inode(struct super_block *sb)
nfsi = (struct nfs_inode *)kmem_cache_alloc(nfs_inode_cachep, SLAB_KERNEL);
if (!nfsi)
return NULL;
nfsi->flags = 0;
nfsi->flags = 0UL;
nfsi->cache_validity = 0UL;
#ifdef CONFIG_NFS_V3_ACL
nfsi->acl_access = ERR_PTR(-EAGAIN);
nfsi->acl_default = ERR_PTR(-EAGAIN);
@ -1982,7 +2042,6 @@ static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags)
nfsi->ndirty = 0;
nfsi->ncommit = 0;
nfsi->npages = 0;
init_waitqueue_head(&nfsi->nfs_i_wait);
nfs4_init_once(nfsi);
}
}

4
fs/nfs/nfs3acl.c
View File

@ -308,7 +308,9 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
nfs_begin_data_update(inode);
status = rpc_call(server->client_acl, ACLPROC3_SETACL,
&args, &fattr, 0);
NFS_FLAGS(inode) |= NFS_INO_INVALID_ACCESS;
spin_lock(&inode->i_lock);
NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ACCESS;
spin_unlock(&inode->i_lock);
nfs_end_data_update(inode);
dprintk("NFS reply setacl: %d\n", status);

4
fs/nfs/nfs3proc.c
View File

@ -120,6 +120,8 @@ nfs3_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
dprintk("NFS call setattr\n");
fattr->valid = 0;
status = rpc_call(NFS_CLIENT(inode), NFS3PROC_SETATTR, &arg, fattr, 0);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
dprintk("NFS reply setattr: %d\n", status);
return status;
}
@ -370,6 +372,8 @@ again:
* not sure this buys us anything (and I'd have
* to revamp the NFSv3 XDR code) */
status = nfs3_proc_setattr(dentry, &fattr, sattr);
if (status == 0)
nfs_setattr_update_inode(dentry->d_inode, sattr);
nfs_refresh_inode(dentry->d_inode, &fattr);
dprintk("NFS reply setattr (post-create): %d\n", status);
}

10
fs/nfs/nfs4proc.c
View File

@ -753,6 +753,7 @@ static int _nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
.rpc_argp = &arg,
.rpc_resp = &res,
};
int status;
fattr->valid = 0;
@ -762,7 +763,8 @@ static int _nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
} else
memcpy(&arg.stateid, &zero_stateid, sizeof(arg.stateid));
return rpc_call_sync(server->client, &msg, 0);
status = rpc_call_sync(server->client, &msg, 0);
return status;
}
static int nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
@ -1145,6 +1147,8 @@ nfs4_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
status = nfs4_do_setattr(NFS_SERVER(inode), fattr,
NFS_FH(inode), sattr, state);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
if (state != NULL)
nfs4_close_state(state, FMODE_WRITE);
put_rpccred(cred);
@ -1449,8 +1453,10 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
struct nfs_fattr fattr;
status = nfs4_do_setattr(NFS_SERVER(dir), &fattr,
NFS_FH(state->inode), sattr, state);
if (status == 0)
if (status == 0) {
nfs_setattr_update_inode(state->inode, sattr);
goto out;
}
} else if (flags != 0)
goto out;
nfs4_close_state(state, flags);

2
fs/nfs/proc.c
View File

@ -114,6 +114,8 @@ nfs_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
dprintk("NFS call setattr\n");
fattr->valid = 0;
status = rpc_call(NFS_CLIENT(inode), NFSPROC_SETATTR, &arg, fattr, 0);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
dprintk("NFS reply setattr: %d\n", status);
return status;
}

8
fs/nfs/read.c
View File

@ -140,7 +140,9 @@ static int nfs_readpage_sync(struct nfs_open_context *ctx, struct inode *inode,
if (rdata->res.eof != 0 || result == 0)
break;
} while (count);
NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
spin_lock(&inode->i_lock);
NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
spin_unlock(&inode->i_lock);
if (count)
memclear_highpage_flush(page, rdata->args.pgbase, count);
@ -473,7 +475,9 @@ void nfs_readpage_result(struct rpc_task *task)
}
task->tk_status = -EIO;
}
NFS_FLAGS(data->inode) |= NFS_INO_INVALID_ATIME;
spin_lock(&data->inode->i_lock);
NFS_I(data->inode)->cache_validity |= NFS_INO_INVALID_ATIME;
spin_unlock(&data->inode->i_lock);
data->complete(data, status);
}

Some files were not shown because too many files have changed in this diff Show More