musb: add high bandwidth ISO support

Tested on OMAP3 host side with Creative (Live! Cam Optia) USB camera
which uses high bandwidth isochronous IN endpoints.  FIFO mode 4 is
updated to provide the needed 4K endpoint buffer without breaking
the g_nokia composite gadget configuration.  (This is the only
gadget driver known to use enough endpoints to notice the change.)

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This commit is contained in:
Ajay Kumar Gupta 2009-04-03 16:16:17 -07:00 committed by Greg Kroah-Hartman
parent d1043a2697
commit a483d7068f
4 changed files with 48 additions and 22 deletions

View File

@ -1084,14 +1084,13 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, },
{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, },
{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, },
{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
};
@ -1351,11 +1350,11 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
}
if (reg & MUSB_CONFIGDATA_HBRXE) {
strcat(aInfo, ", HB-ISO Rx");
strcat(aInfo, " (X)"); /* no driver support */
musb->hb_iso_rx = true;
}
if (reg & MUSB_CONFIGDATA_HBTXE) {
strcat(aInfo, ", HB-ISO Tx");
strcat(aInfo, " (X)"); /* no driver support */
musb->hb_iso_tx = true;
}
if (reg & MUSB_CONFIGDATA_SOFTCONE)
strcat(aInfo, ", SoftConn");

View File

@ -395,6 +395,9 @@ struct musb {
unsigned is_multipoint:1;
unsigned ignore_disconnect:1; /* during bus resets */
unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
#ifdef C_MP_TX
unsigned bulk_split:1;
#define can_bulk_split(musb,type) \

View File

@ -605,7 +605,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
/* NOTE: bulk combining rewrites high bits of maxpacket */
musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
musb_writew(ep->regs, MUSB_RXMAXP,
qh->maxpacket | ((qh->hb_mult - 1) << 11));
ep->rx_reinit = 0;
}
@ -627,9 +628,10 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
csr = musb_readw(epio, MUSB_TXCSR);
if (length > pkt_size) {
mode = 1;
csr |= MUSB_TXCSR_AUTOSET
| MUSB_TXCSR_DMAMODE
| MUSB_TXCSR_DMAENAB;
csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
/* autoset shouldn't be set in high bandwidth */
if (qh->hb_mult == 1)
csr |= MUSB_TXCSR_AUTOSET;
} else {
mode = 0;
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
@ -1497,6 +1499,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
/* packet error reported later */
iso_err = true;
}
} else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
DBG(3, "end %d high bandwidth incomplete ISO packet RX\n",
epnum);
status = -EPROTO;
}
/* faults abort the transfer */
@ -1704,7 +1710,11 @@ void musb_host_rx(struct musb *musb, u8 epnum)
val &= ~MUSB_RXCSR_H_AUTOREQ;
else
val |= MUSB_RXCSR_H_AUTOREQ;
val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
val |= MUSB_RXCSR_DMAENAB;
/* autoclear shouldn't be set in high bandwidth */
if (qh->hb_mult == 1)
val |= MUSB_RXCSR_AUTOCLEAR;
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_H_WZC_BITS | val);
@ -1790,9 +1800,10 @@ static int musb_schedule(
continue;
if (is_in)
diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
diff = hw_ep->max_packet_sz_rx;
else
diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
diff = hw_ep->max_packet_sz_tx;
diff -= (qh->maxpacket * qh->hb_mult);
if (diff >= 0 && best_diff > diff) {
best_diff = diff;
@ -1895,15 +1906,27 @@ static int musb_urb_enqueue(
qh->is_ready = 1;
qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
qh->type = usb_endpoint_type(epd);
/* no high bandwidth support yet */
if (qh->maxpacket & ~0x7ff) {
ret = -EMSGSIZE;
goto done;
/* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
* Some musb cores don't support high bandwidth ISO transfers; and
* we don't (yet!) support high bandwidth interrupt transfers.
*/
qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
if (qh->hb_mult > 1) {
int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
if (ok)
ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
|| (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
if (!ok) {
ret = -EMSGSIZE;
goto done;
}
qh->maxpacket &= 0x7ff;
}
qh->epnum = usb_endpoint_num(epd);
qh->type = usb_endpoint_type(epd);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);

View File

@ -67,6 +67,7 @@ struct musb_qh {
u8 is_ready; /* safe to modify hw_ep */
u8 type; /* XFERTYPE_* */
u8 epnum;
u8 hb_mult; /* high bandwidth pkts per uf */
u16 maxpacket;
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */