OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge branch 'topic/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel

This commit is contained in:
Jaroslav Kysela 2010-01-08 09:11:18 +01:00
parent cd9d95a555 c97259df3f
commit a4ad68d57e
3329 changed files with 158056 additions and 68996 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
.gitignore vendored
View File

@ -22,6 +22,7 @@
*.lst
*.symtypes
*.order
modules.builtin
*.elf
*.bin
*.gz
@ -45,14 +46,8 @@ Module.symvers
#
# Generated include files
#
include/asm
include/asm-*/asm-offsets.h
include/config
include/linux/autoconf.h
include/linux/compile.h
include/linux/version.h
include/linux/utsrelease.h
include/linux/bounds.h
include/generated
# stgit generated dirs

18
Documentation/ABI/testing/sysfs-bus-usb
View File

@ -21,25 +21,27 @@ Contact: Alan Stern <stern@rowland.harvard.edu>
Description:
Each USB device directory will contain a file named
power/level. This file holds a power-level setting for
the device, one of "on", "auto", or "suspend".
the device, either "on" or "auto".
"on" means that the device is not allowed to autosuspend,
although normal suspends for system sleep will still
be honored. "auto" means the device will autosuspend
and autoresume in the usual manner, according to the
capabilities of its driver. "suspend" means the device
is forced into a suspended state and it will not autoresume
in response to I/O requests. However remote-wakeup requests
from the device may still be enabled (the remote-wakeup
setting is controlled separately by the power/wakeup
attribute).
capabilities of its driver.
During normal use, devices should be left in the "auto"
level. The other levels are meant for administrative uses.
level. The "on" level is meant for administrative uses.
If you want to suspend a device immediately but leave it
free to wake up in response to I/O requests, you should
write "0" to power/autosuspend.
Device not capable of proper suspend and resume should be
left in the "on" level. Although the USB spec requires
devices to support suspend/resume, many of them do not.
In fact so many don't that by default, the USB core
initializes all non-hub devices in the "on" level. Some
drivers may change this setting when they are bound.
What: /sys/bus/usb/devices/.../power/persist
Date: May 2007
KernelVersion: 2.6.23

14
Documentation/ABI/testing/sysfs-devices-memory
View File

@ -60,6 +60,19 @@ Description:
Users: hotplug memory remove tools
https://w3.opensource.ibm.com/projects/powerpc-utils/
What: /sys/devices/system/memoryX/nodeY
Date: October 2009
Contact: Linux Memory Management list <linux-mm@kvack.org>
Description:
When CONFIG_NUMA is enabled, a symbolic link that
points to the corresponding NUMA node directory.
For example, the following symbolic link is created for
memory section 9 on node0:
/sys/devices/system/memory/memory9/node0 -> ../../node/node0
What: /sys/devices/system/node/nodeX/memoryY
Date: September 2008
Contact: Gary Hade <garyhade@us.ibm.com>
@ -70,4 +83,3 @@ Description:
memory section directory. For example, the following symbolic
link is created for memory section 9 on node0.
/sys/devices/system/node/node0/memory9 -> ../../memory/memory9

14
Documentation/ABI/testing/sysfs-devices-system-cpu
View File

@ -92,6 +92,20 @@ Description: Discover NUMA node a CPU belongs to
/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
What: /sys/devices/system/cpu/cpu#/node
Date: October 2009
Contact: Linux memory management mailing list <linux-mm@kvack.org>
Description: Discover NUMA node a CPU belongs to
When CONFIG_NUMA is enabled, a symbolic link that points
to the corresponding NUMA node directory.
For example, the following symlink is created for cpu42
in NUMA node 2:
/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
What: /sys/devices/system/cpu/cpu#/topology/core_id
/sys/devices/system/cpu/cpu#/topology/core_siblings
/sys/devices/system/cpu/cpu#/topology/core_siblings_list

44
Documentation/ABI/testing/sysfs-memory-page-offline Normal file
View File

@ -0,0 +1,44 @@
What: /sys/devices/system/memory/soft_offline_page
Date: Sep 2009
KernelVersion: 2.6.33
Contact: andi@firstfloor.org
Description:
Soft-offline the memory page containing the physical address
written into this file. Input is a hex number specifying the
physical address of the page. The kernel will then attempt
to soft-offline it, by moving the contents elsewhere or
dropping it if possible. The kernel will then be placed
on the bad page list and never be reused.
The offlining is done in kernel specific granuality.
Normally it's the base page size of the kernel, but
this might change.
The page must be still accessible, not poisoned. The
kernel will never kill anything for this, but rather
fail the offline. Return value is the size of the
number, or a error when the offlining failed. Reading
the file is not allowed.
What: /sys/devices/system/memory/hard_offline_page
Date: Sep 2009
KernelVersion: 2.6.33
Contact: andi@firstfloor.org
Description:
Hard-offline the memory page containing the physical
address written into this file. Input is a hex number
specifying the physical address of the page. The
kernel will then attempt to hard-offline the page, by
trying to drop the page or killing any owner or
triggering IO errors if needed. Note this may kill
any processes owning the page. The kernel will avoid
to access this page assuming it's poisoned by the
hardware.
The offlining is done in kernel specific granuality.
Normally it's the base page size of the kernel, but
this might change.
Return value is the size of the number, or a error when
the offlining failed.
Reading the file is not allowed.

2
Documentation/Changes
View File

@ -49,6 +49,8 @@ o oprofile 0.9 # oprofiled --version
o udev 081 # udevinfo -V
o grub 0.93 # grub --version
o mcelog 0.6
o iptables 1.4.1 # iptables -V
Kernel compilation
==================

38
Documentation/DocBook/Makefile
View File

@ -8,7 +8,7 @@
DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
@ -32,10 +32,10 @@ PS_METHOD = $(prefer-db2x)
###
# The targets that may be used.
PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media
PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks
BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
xmldocs: $(BOOKS)
xmldocs: $(BOOKS) xmldoclinks
sgmldocs: xmldocs
PS := $(patsubst %.xml, %.ps, $(BOOKS))
@ -45,15 +45,24 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
pdfdocs: $(PDF)
HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
htmldocs: media $(HTML)
htmldocs: $(HTML)
$(call build_main_index)
$(call build_images)
MAN := $(patsubst %.xml, %.9, $(BOOKS))
mandocs: $(MAN)
media:
mkdir -p $(srctree)/Documentation/DocBook/media/
cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/
build_images = mkdir -p $(objtree)/Documentation/DocBook/media/ && \
cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(objtree)/Documentation/DocBook/media/
xmldoclinks:
ifneq ($(objtree),$(srctree))
for dep in dvb media-entities.tmpl media-indices.tmpl v4l; do \
rm -f $(objtree)/Documentation/DocBook/$$dep \
&& ln -s $(srctree)/Documentation/DocBook/$$dep $(objtree)/Documentation/DocBook/ \
|| exit; \
done
endif
installmandocs: mandocs
mkdir -p /usr/local/man/man9/
@ -65,7 +74,7 @@ KERNELDOC = $(srctree)/scripts/kernel-doc
DOCPROC = $(objtree)/scripts/basic/docproc
XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl
#XMLTOFLAGS += --skip-validation
XMLTOFLAGS += --skip-validation
###
# DOCPROC is used for two purposes:
@ -101,17 +110,6 @@ endif
# Changes in kernel-doc force a rebuild of all documentation
$(BOOKS): $(KERNELDOC)
###
# procfs guide uses a .c file as example code.
# This requires an explicit dependency
C-procfs-example = procfs_example.xml
C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
$(obj)/procfs-guide.xml: $(C-procfs-example2)
# List of programs to build
##oops, this is a kernel module::hostprogs-y := procfs_example
obj-m += procfs_example.o
# Tell kbuild to always build the programs
always := $(hostprogs-y)
@ -238,7 +236,7 @@ clean-files := $(DOCBOOKS) \
$(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
$(patsubst %.xml, %.html, $(DOCBOOKS)) \
$(patsubst %.xml, %.9, $(DOCBOOKS)) \
$(C-procfs-example) $(index)
$(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man

18
Documentation/DocBook/media-entities.tmpl
View File

@ -23,6 +23,7 @@
<!ENTITY VIDIOC-ENUMINPUT "<link linkend='vidioc-enuminput'><constant>VIDIOC_ENUMINPUT</constant></link>">
<!ENTITY VIDIOC-ENUMOUTPUT "<link linkend='vidioc-enumoutput'><constant>VIDIOC_ENUMOUTPUT</constant></link>">
<!ENTITY VIDIOC-ENUMSTD "<link linkend='vidioc-enumstd'><constant>VIDIOC_ENUMSTD</constant></link>">
<!ENTITY VIDIOC-ENUM-DV-PRESETS "<link linkend='vidioc-enum-dv-presets'><constant>VIDIOC_ENUM_DV_PRESETS</constant></link>">
<!ENTITY VIDIOC-ENUM-FMT "<link linkend='vidioc-enum-fmt'><constant>VIDIOC_ENUM_FMT</constant></link>">
<!ENTITY VIDIOC-ENUM-FRAMEINTERVALS "<link linkend='vidioc-enum-frameintervals'><constant>VIDIOC_ENUM_FRAMEINTERVALS</constant></link>">
<!ENTITY VIDIOC-ENUM-FRAMESIZES "<link linkend='vidioc-enum-framesizes'><constant>VIDIOC_ENUM_FRAMESIZES</constant></link>">
@ -30,6 +31,8 @@
<!ENTITY VIDIOC-G-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_G_AUDOUT</constant></link>">
<!ENTITY VIDIOC-G-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_G_CROP</constant></link>">
<!ENTITY VIDIOC-G-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_G_CTRL</constant></link>">
<!ENTITY VIDIOC-G-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_G_DV_PRESET</constant></link>">
<!ENTITY VIDIOC-G-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_G_DV_TIMINGS</constant></link>">
<!ENTITY VIDIOC-G-ENC-INDEX "<link linkend='vidioc-g-enc-index'><constant>VIDIOC_G_ENC_INDEX</constant></link>">
<!ENTITY VIDIOC-G-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_G_EXT_CTRLS</constant></link>">
<!ENTITY VIDIOC-G-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_G_FBUF</constant></link>">
@ -53,6 +56,7 @@
<!ENTITY VIDIOC-QUERYCTRL "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYCTRL</constant></link>">
<!ENTITY VIDIOC-QUERYMENU "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYMENU</constant></link>">
<!ENTITY VIDIOC-QUERYSTD "<link linkend='vidioc-querystd'><constant>VIDIOC_QUERYSTD</constant></link>">
<!ENTITY VIDIOC-QUERY-DV-PRESET "<link linkend='vidioc-query-dv-preset'><constant>VIDIOC_QUERY_DV_PRESET</constant></link>">
<!ENTITY VIDIOC-REQBUFS "<link linkend='vidioc-reqbufs'><constant>VIDIOC_REQBUFS</constant></link>">
<!ENTITY VIDIOC-STREAMOFF "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMOFF</constant></link>">
<!ENTITY VIDIOC-STREAMON "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMON</constant></link>">
@ -60,6 +64,8 @@
<!ENTITY VIDIOC-S-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_S_AUDOUT</constant></link>">
<!ENTITY VIDIOC-S-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_S_CROP</constant></link>">
<!ENTITY VIDIOC-S-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_S_CTRL</constant></link>">
<!ENTITY VIDIOC-S-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_S_DV_PRESET</constant></link>">
<!ENTITY VIDIOC-S-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_S_DV_TIMINGS</constant></link>">
<!ENTITY VIDIOC-S-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_S_EXT_CTRLS</constant></link>">
<!ENTITY VIDIOC-S-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_S_FBUF</constant></link>">
<!ENTITY VIDIOC-S-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_S_FMT</constant></link>">
@ -118,6 +124,7 @@
<!-- Structures -->
<!ENTITY v4l2-audio "struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link>">
<!ENTITY v4l2-audioout "struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link>">
<!ENTITY v4l2-bt-timings "struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link>">
<!ENTITY v4l2-buffer "struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link>">
<!ENTITY v4l2-capability "struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link>">
<!ENTITY v4l2-captureparm "struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link>">
@ -128,6 +135,9 @@
<!ENTITY v4l2-dbg-chip-ident "struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link>">
<!ENTITY v4l2-dbg-match "struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link>">
<!ENTITY v4l2-dbg-register "struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link>">
<!ENTITY v4l2-dv-enum-preset "struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link>">
<!ENTITY v4l2-dv-preset "struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link>">
<!ENTITY v4l2-dv-timings "struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link>">
<!ENTITY v4l2-enc-idx "struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link>">
<!ENTITY v4l2-enc-idx-entry "struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link>">
<!ENTITY v4l2-encoder-cmd "struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link>">
@ -243,6 +253,10 @@
<!ENTITY sub-enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
<!ENTITY sub-enuminput SYSTEM "v4l/vidioc-enuminput.xml">
<!ENTITY sub-enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
<!ENTITY sub-enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
<!ENTITY sub-g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
<!ENTITY sub-query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
<!ENTITY sub-g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
<!ENTITY sub-enumstd SYSTEM "v4l/vidioc-enumstd.xml">
<!ENTITY sub-g-audio SYSTEM "v4l/vidioc-g-audio.xml">
<!ENTITY sub-g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">
@ -333,6 +347,10 @@
<!ENTITY enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
<!ENTITY enuminput SYSTEM "v4l/vidioc-enuminput.xml">
<!ENTITY enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
<!ENTITY enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
<!ENTITY g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
<!ENTITY query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
<!ENTITY g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
<!ENTITY enumstd SYSTEM "v4l/vidioc-enumstd.xml">
<!ENTITY g-audio SYSTEM "v4l/vidioc-g-audio.xml">
<!ENTITY g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">

4
Documentation/DocBook/media-indices.tmpl
View File

@ -36,6 +36,7 @@
<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-preemphasis'>v4l2_preemphasis</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link></primaryie></indexentry>
@ -46,6 +47,9 @@
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link></primaryie></indexentry>
<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link></primaryie></indexentry>

626
Documentation/DocBook/procfs-guide.tmpl
View File

@ -1,626 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
<!ENTITY procfsexample SYSTEM "procfs_example.xml">
]>
<book id="LKProcfsGuide">
<bookinfo>
<title>Linux Kernel Procfs Guide</title>
<authorgroup>
<author>
<firstname>Erik</firstname>
<othername>(J.A.K.)</othername>
<surname>Mouw</surname>
<affiliation>
<address>
<email>mouw@nl.linux.org</email>
</address>
</affiliation>
</author>
<othercredit>
<contrib>
This software and documentation were written while working on the
LART computing board
(<ulink url="http://www.lartmaker.nl/">http://www.lartmaker.nl/</ulink>),
which was sponsored by the Delt University of Technology projects
Mobile Multi-media Communications and Ubiquitous Communications.
</contrib>
</othercredit>
</authorgroup>
<revhistory>
<revision>
<revnumber>1.0</revnumber>
<date>May 30, 2001</date>
<revremark>Initial revision posted to linux-kernel</revremark>
</revision>
<revision>
<revnumber>1.1</revnumber>
<date>June 3, 2001</date>
<revremark>Revised after comments from linux-kernel</revremark>
</revision>
</revhistory>
<copyright>
<year>2001</year>
<holder>Erik Mouw</holder>
</copyright>
<legalnotice>
<para>
This documentation is free software; you can redistribute it
and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This documentation is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc>
</toc>
<preface id="Preface">
<title>Preface</title>
<para>
This guide describes the use of the procfs file system from
within the Linux kernel. The idea to write this guide came up on
the #kernelnewbies IRC channel (see <ulink
url="http://www.kernelnewbies.org/">http://www.kernelnewbies.org/</ulink>),
when Jeff Garzik explained the use of procfs and forwarded me a
message Alexander Viro wrote to the linux-kernel mailing list. I
agreed to write it up nicely, so here it is.
</para>
<para>
I'd like to thank Jeff Garzik
<email>jgarzik@pobox.com</email> and Alexander Viro
<email>viro@parcelfarce.linux.theplanet.co.uk</email> for their input,
Tim Waugh <email>twaugh@redhat.com</email> for his <ulink
url="http://people.redhat.com/twaugh/docbook/selfdocbook/">Selfdocbook</ulink>,
and Marc Joosen <email>marcj@historia.et.tudelft.nl</email> for
proofreading.
</para>
<para>
Erik
</para>
</preface>
<chapter id="intro">
<title>Introduction</title>
<para>
The <filename class="directory">/proc</filename> file system
(procfs) is a special file system in the linux kernel. It's a
virtual file system: it is not associated with a block device
but exists only in memory. The files in the procfs are there to
allow userland programs access to certain information from the
kernel (like process information in <filename
class="directory">/proc/[0-9]+/</filename>), but also for debug
purposes (like <filename>/proc/ksyms</filename>).
</para>
<para>
This guide describes the use of the procfs file system from
within the Linux kernel. It starts by introducing all relevant
functions to manage the files within the file system. After that
it shows how to communicate with userland, and some tips and
tricks will be pointed out. Finally a complete example will be
shown.
</para>
<para>
Note that the files in <filename
class="directory">/proc/sys</filename> are sysctl files: they
don't belong to procfs and are governed by a completely
different API described in the Kernel API book.
</para>
</chapter>
<chapter id="managing">
<title>Managing procfs entries</title>
<para>
This chapter describes the functions that various kernel
components use to populate the procfs with files, symlinks,
device nodes, and directories.
</para>
<para>
A minor note before we start: if you want to use any of the
procfs functions, be sure to include the correct header file!
This should be one of the first lines in your code:
</para>
<programlisting>
#include &lt;linux/proc_fs.h&gt;
</programlisting>
<sect1 id="regularfile">
<title>Creating a regular file</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry* <function>create_proc_entry</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>mode_t <parameter>mode</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
This function creates a regular file with the name
<parameter>name</parameter>, file mode
<parameter>mode</parameter> in the directory
<parameter>parent</parameter>. To create a file in the root of
the procfs, use <constant>NULL</constant> as
<parameter>parent</parameter> parameter. When successful, the
function will return a pointer to the freshly created
<structname>struct proc_dir_entry</structname>; otherwise it
will return <constant>NULL</constant>. <xref
linkend="userland"/> describes how to do something useful with
regular files.
</para>
<para>
Note that it is specifically supported that you can pass a
path that spans multiple directories. For example
<function>create_proc_entry</function>(<parameter>"drivers/via0/info"</parameter>)
will create the <filename class="directory">via0</filename>
directory if necessary, with standard
<constant>0755</constant> permissions.
</para>
<para>
If you only want to be able to read the file, the function
<function>create_proc_read_entry</function> described in <xref
linkend="convenience"/> may be used to create and initialise
the procfs entry in one single call.
</para>
</sect1>
<sect1 id="Creating_a_symlink">
<title>Creating a symlink</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry*
<function>proc_symlink</function></funcdef> <paramdef>const
char* <parameter>name</parameter></paramdef>
<paramdef>struct proc_dir_entry*
<parameter>parent</parameter></paramdef> <paramdef>const
char* <parameter>dest</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
This creates a symlink in the procfs directory
<parameter>parent</parameter> that points from
<parameter>name</parameter> to
<parameter>dest</parameter>. This translates in userland to
<literal>ln -s</literal> <parameter>dest</parameter>
<parameter>name</parameter>.
</para>
</sect1>
<sect1 id="Creating_a_directory">
<title>Creating a directory</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry* <function>proc_mkdir</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
Create a directory <parameter>name</parameter> in the procfs
directory <parameter>parent</parameter>.
</para>
</sect1>
<sect1 id="Removing_an_entry">
<title>Removing an entry</title>
<funcsynopsis>
<funcprototype>
<funcdef>void <function>remove_proc_entry</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
Removes the entry <parameter>name</parameter> in the directory
<parameter>parent</parameter> from the procfs. Entries are
removed by their <emphasis>name</emphasis>, not by the
<structname>struct proc_dir_entry</structname> returned by the
various create functions. Note that this function doesn't
recursively remove entries.
</para>
<para>
Be sure to free the <structfield>data</structfield> entry from
the <structname>struct proc_dir_entry</structname> before
<function>remove_proc_entry</function> is called (that is: if
there was some <structfield>data</structfield> allocated, of
course). See <xref linkend="usingdata"/> for more information
on using the <structfield>data</structfield> entry.
</para>
</sect1>
</chapter>
<chapter id="userland">
<title>Communicating with userland</title>
<para>
Instead of reading (or writing) information directly from
kernel memory, procfs works with <emphasis>call back
functions</emphasis> for files: functions that are called when
a specific file is being read or written. Such functions have
to be initialised after the procfs file is created by setting
the <structfield>read_proc</structfield> and/or
<structfield>write_proc</structfield> fields in the
<structname>struct proc_dir_entry*</structname> that the
function <function>create_proc_entry</function> returned:
</para>
<programlisting>
struct proc_dir_entry* entry;
entry->read_proc = read_proc_foo;
entry->write_proc = write_proc_foo;
</programlisting>
<para>
If you only want to use a the
<structfield>read_proc</structfield>, the function
<function>create_proc_read_entry</function> described in <xref
linkend="convenience"/> may be used to create and initialise the
procfs entry in one single call.
</para>
<sect1 id="Reading_data">
<title>Reading data</title>
<para>
The read function is a call back function that allows userland
processes to read data from the kernel. The read function
should have the following format:
</para>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>read_func</function></funcdef>
<paramdef>char* <parameter>buffer</parameter></paramdef>
<paramdef>char** <parameter>start</parameter></paramdef>
<paramdef>off_t <parameter>off</parameter></paramdef>
<paramdef>int <parameter>count</parameter></paramdef>
<paramdef>int* <parameter>peof</parameter></paramdef>
<paramdef>void* <parameter>data</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
The read function should write its information into the
<parameter>buffer</parameter>, which will be exactly
<literal>PAGE_SIZE</literal> bytes long.
</para>
<para>
The parameter
<parameter>peof</parameter> should be used to signal that the
end of the file has been reached by writing
<literal>1</literal> to the memory location
<parameter>peof</parameter> points to.
</para>
<para>
The <parameter>data</parameter>
parameter can be used to create a single call back function for
several files, see <xref linkend="usingdata"/>.
</para>
<para>
The rest of the parameters and the return value are described
by a comment in <filename>fs/proc/generic.c</filename> as follows:
</para>
<blockquote>
<para>
You have three ways to return data:
</para>
<orderedlist>
<listitem>
<para>
Leave <literal>*start = NULL</literal>. (This is the default.)
Put the data of the requested offset at that
offset within the buffer. Return the number (<literal>n</literal>)
of bytes there are from the beginning of the
buffer up to the last byte of data. If the
number of supplied bytes (<literal>= n - offset</literal>) is
greater than zero and you didn't signal eof
and the reader is prepared to take more data
you will be called again with the requested
offset advanced by the number of bytes
absorbed. This interface is useful for files
no larger than the buffer.
</para>
</listitem>
<listitem>
<para>
Set <literal>*start</literal> to an unsigned long value less than
the buffer address but greater than zero.
Put the data of the requested offset at the
beginning of the buffer. Return the number of
bytes of data placed there. If this number is
greater than zero and you didn't signal eof
and the reader is prepared to take more data
you will be called again with the requested
offset advanced by <literal>*start</literal>. This interface is
useful when you have a large file consisting
of a series of blocks which you want to count
and return as wholes.
(Hack by Paul.Russell@rustcorp.com.au)
</para>
</listitem>
<listitem>
<para>
Set <literal>*start</literal> to an address within the buffer.
Put the data of the requested offset at <literal>*start</literal>.
Return the number of bytes of data placed there.
If this number is greater than zero and you
didn't signal eof and the reader is prepared to
take more data you will be called again with the
requested offset advanced by the number of bytes
absorbed.
</para>
</listitem>
</orderedlist>
</blockquote>
<para>
<xref linkend="example"/> shows how to use a read call back
function.
</para>
</sect1>
<sect1 id="Writing_data">
<title>Writing data</title>
<para>
The write call back function allows a userland process to write
data to the kernel, so it has some kind of control over the
kernel. The write function should have the following format:
</para>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>write_func</function></funcdef>
<paramdef>struct file* <parameter>file</parameter></paramdef>
<paramdef>const char* <parameter>buffer</parameter></paramdef>
<paramdef>unsigned long <parameter>count</parameter></paramdef>
<paramdef>void* <parameter>data</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
The write function should read <parameter>count</parameter>
bytes at maximum from the <parameter>buffer</parameter>. Note
that the <parameter>buffer</parameter> doesn't live in the
kernel's memory space, so it should first be copied to kernel
space with <function>copy_from_user</function>. The
<parameter>file</parameter> parameter is usually
ignored. <xref linkend="usingdata"/> shows how to use the
<parameter>data</parameter> parameter.
</para>
<para>
Again, <xref linkend="example"/> shows how to use this call back
function.
</para>
</sect1>
<sect1 id="usingdata">
<title>A single call back for many files</title>
<para>
When a large number of almost identical files is used, it's
quite inconvenient to use a separate call back function for
each file. A better approach is to have a single call back
function that distinguishes between the files by using the
<structfield>data</structfield> field in <structname>struct
proc_dir_entry</structname>. First of all, the
<structfield>data</structfield> field has to be initialised:
</para>
<programlisting>
struct proc_dir_entry* entry;
struct my_file_data *file_data;
file_data = kmalloc(sizeof(struct my_file_data), GFP_KERNEL);
entry->data = file_data;
</programlisting>
<para>
The <structfield>data</structfield> field is a <type>void
*</type>, so it can be initialised with anything.
</para>
<para>
Now that the <structfield>data</structfield> field is set, the
<function>read_proc</function> and
<function>write_proc</function> can use it to distinguish
between files because they get it passed into their
<parameter>data</parameter> parameter:
</para>
<programlisting>
int foo_read_func(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
int len;
if(data == file_data) {
/* special case for this file */
} else {
/* normal processing */
}
return len;
}
</programlisting>
<para>
Be sure to free the <structfield>data</structfield> data field
when removing the procfs entry.
</para>
</sect1>
</chapter>
<chapter id="tips">
<title>Tips and tricks</title>
<sect1 id="convenience">
<title>Convenience functions</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry* <function>create_proc_read_entry</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>mode_t <parameter>mode</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
<paramdef>read_proc_t* <parameter>read_proc</parameter></paramdef>
<paramdef>void* <parameter>data</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
This function creates a regular file in exactly the same way
as <function>create_proc_entry</function> from <xref
linkend="regularfile"/> does, but also allows to set the read
function <parameter>read_proc</parameter> in one call. This
function can set the <parameter>data</parameter> as well, like
explained in <xref linkend="usingdata"/>.
</para>
</sect1>
<sect1 id="Modules">
<title>Modules</title>
<para>
If procfs is being used from within a module, be sure to set
the <structfield>owner</structfield> field in the
<structname>struct proc_dir_entry</structname> to
<constant>THIS_MODULE</constant>.
</para>
<programlisting>
struct proc_dir_entry* entry;
entry->owner = THIS_MODULE;
</programlisting>
</sect1>
<sect1 id="Mode_and_ownership">
<title>Mode and ownership</title>
<para>
Sometimes it is useful to change the mode and/or ownership of
a procfs entry. Here is an example that shows how to achieve
that:
</para>
<programlisting>
struct proc_dir_entry* entry;
entry->mode = S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH;
entry->uid = 0;
entry->gid = 100;
</programlisting>
</sect1>
</chapter>
<chapter id="example">
<title>Example</title>
<!-- be careful with the example code: it shouldn't be wider than
approx. 60 columns, or otherwise it won't fit properly on a page
-->
&procfsexample;
</chapter>
</book>

201
Documentation/DocBook/procfs_example.c
View File

@ -1,201 +0,0 @@
/*
* procfs_example.c: an example proc interface
*
* Copyright (C) 2001, Erik Mouw (mouw@nl.linux.org)
*
* This file accompanies the procfs-guide in the Linux kernel
* source. Its main use is to demonstrate the concepts and
* functions described in the guide.
*
* This software has been developed while working on the LART
* computing board (http://www.lartmaker.nl), which was sponsored
* by the Delt University of Technology projects Mobile Multi-media
* Communications and Ubiquitous Communications.
*
* This program is free software; you can redistribute
* it and/or modify it under the terms of the GNU General
* Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be
* useful, but WITHOUT ANY WARRANTY; without even the implied
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place,
* Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/jiffies.h>
#include <asm/uaccess.h>
#define MODULE_VERS "1.0"
#define MODULE_NAME "procfs_example"
#define FOOBAR_LEN 8
struct fb_data_t {
char name[FOOBAR_LEN + 1];
char value[FOOBAR_LEN + 1];
};
static struct proc_dir_entry *example_dir, *foo_file,
*bar_file, *jiffies_file, *symlink;
struct fb_data_t foo_data, bar_data;
static int proc_read_jiffies(char *page, char **start,
off_t off, int count,
int *eof, void *data)
{
int len;
len = sprintf(page, "jiffies = %ld\n",
jiffies);
return len;
}
static int proc_read_foobar(char *page, char **start,
off_t off, int count,
int *eof, void *data)
{
int len;
struct fb_data_t *fb_data = (struct fb_data_t *)data;
/* DON'T DO THAT - buffer overruns are bad */
len = sprintf(page, "%s = '%s'\n",
fb_data->name, fb_data->value);
return len;
}
static int proc_write_foobar(struct file *file,
const char *buffer,
unsigned long count,
void *data)
{
int len;
struct fb_data_t *fb_data = (struct fb_data_t *)data;
if(count > FOOBAR_LEN)
len = FOOBAR_LEN;
else
len = count;
if(copy_from_user(fb_data->value, buffer, len))
return -EFAULT;
fb_data->value[len] = '\0';
return len;
}
static int __init init_procfs_example(void)
{
int rv = 0;
/* create directory */
example_dir = proc_mkdir(MODULE_NAME, NULL);
if(example_dir == NULL) {
rv = -ENOMEM;
goto out;
}
/* create jiffies using convenience function */
jiffies_file = create_proc_read_entry("jiffies",
0444, example_dir,
proc_read_jiffies,
NULL);
if(jiffies_file == NULL) {
rv = -ENOMEM;
goto no_jiffies;
}
/* create foo and bar files using same callback
* functions
*/
foo_file = create_proc_entry("foo", 0644, example_dir);
if(foo_file == NULL) {
rv = -ENOMEM;
goto no_foo;
}
strcpy(foo_data.name, "foo");
strcpy(foo_data.value, "foo");
foo_file->data = &foo_data;
foo_file->read_proc = proc_read_foobar;
foo_file->write_proc = proc_write_foobar;
bar_file = create_proc_entry("bar", 0644, example_dir);
if(bar_file == NULL) {
rv = -ENOMEM;
goto no_bar;
}
strcpy(bar_data.name, "bar");
strcpy(bar_data.value, "bar");
bar_file->data = &bar_data;
bar_file->read_proc = proc_read_foobar;
bar_file->write_proc = proc_write_foobar;
/* create symlink */
symlink = proc_symlink("jiffies_too", example_dir,
"jiffies");
if(symlink == NULL) {
rv = -ENOMEM;
goto no_symlink;
}
/* everything OK */
printk(KERN_INFO "%s %s initialised\n",
MODULE_NAME, MODULE_VERS);
return 0;
no_symlink:
remove_proc_entry("bar", example_dir);
no_bar:
remove_proc_entry("foo", example_dir);
no_foo:
remove_proc_entry("jiffies", example_dir);
no_jiffies:
remove_proc_entry(MODULE_NAME, NULL);
out:
return rv;
}
static void __exit cleanup_procfs_example(void)
{
remove_proc_entry("jiffies_too", example_dir);
remove_proc_entry("bar", example_dir);
remove_proc_entry("foo", example_dir);
remove_proc_entry("jiffies", example_dir);
remove_proc_entry(MODULE_NAME, NULL);
printk(KERN_INFO "%s %s removed\n",
MODULE_NAME, MODULE_VERS);
}
module_init(init_procfs_example);
module_exit(cleanup_procfs_example);
MODULE_AUTHOR("Erik Mouw");
MODULE_DESCRIPTION("procfs examples");
MODULE_LICENSE("GPL");

35
Documentation/DocBook/v4l/common.xml
View File

@ -716,6 +716,41 @@ if (-1 == ioctl (fd, &VIDIOC-S-STD;, &amp;std_id)) {
}
</programlisting>
</example>
<section id="dv-timings">
<title>Digital Video (DV) Timings</title>
<para>
The video standards discussed so far has been dealing with Analog TV and the
corresponding video timings. Today there are many more different hardware interfaces
such as High Definition TV interfaces (HDMI), VGA, DVI connectors etc., that carry
video signals and there is a need to extend the API to select the video timings
for these interfaces. Since it is not possible to extend the &v4l2-std-id; due to
the limited bits available, a new set of IOCTLs is added to set/get video timings at
the input and output: </para><itemizedlist>
<listitem>
<para>DV Presets: Digital Video (DV) presets. These are IDs representing a
video timing at the input/output. Presets are pre-defined timings implemented
by the hardware according to video standards. A __u32 data type is used to represent
a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions
to support as many different presets as needed.</para>
</listitem>
<listitem>
<para>Custom DV Timings: This will allow applications to define more detailed
custom video timings for the interface. This includes parameters such as width, height,
polarities, frontporch, backporch etc.
</para>
</listitem>
</itemizedlist>
<para>To enumerate and query the attributes of DV presets supported by a device,
applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset,
applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the
&VIDIOC-S-DV-PRESET; ioctl.</para>
<para>To set custom DV timings for the device, applications use the
&VIDIOC-S-DV-TIMINGS; ioctl and to get current custom DV timings they use the
&VIDIOC-G-DV-TIMINGS; ioctl.</para>
<para>Applications can make use of the <xref linkend="input-capabilities" /> and
<xref linkend="output-capabilities"/> flags to decide what ioctls are available to set the
video timings for the device.</para>
</section>
</section>
&sub-controls;

16
Documentation/DocBook/v4l/compat.xml
View File

@ -2291,8 +2291,8 @@ was renamed to <structname id="v4l2-chip-ident-old">v4l2_chip_ident_old</structn
<listitem>
<para>New control <constant>V4L2_CID_COLORFX</constant> was added.</para>
</listitem>
</orderedlist>
</section>
</orderedlist>
</section>
<section>
<title>V4L2 in Linux 2.6.32</title>
<orderedlist>
@ -2322,8 +2322,16 @@ more information.</para>
<listitem>
<para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
</listitem>
</orderedlist>
</section>
</orderedlist>
</section>
<section>
<title>V4L2 in Linux 2.6.33</title>
<orderedlist>
<listitem>
<para>Added support for Digital Video timings in order to support HDTV receivers and transmitters.</para>
</listitem>
</orderedlist>
</section>
</section>
<section id="other">

26
Documentation/DocBook/v4l/v4l2.xml
View File

@ -74,6 +74,17 @@ Remote Controller chapter.</contrib>
</address>
</affiliation>
</author>
<author>
<firstname>Muralidharan</firstname>
<surname>Karicheri</surname>
<contrib>Documented the Digital Video timings API.</contrib>
<affiliation>
<address>
<email>m-karicheri2@ti.com</email>
</address>
</affiliation>
</author>
</authorgroup>
<copyright>
@ -89,7 +100,7 @@ Remote Controller chapter.</contrib>
<year>2008</year>
<year>2009</year>
<holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
Rubli, Andy Walls, Mauro Carvalho Chehab</holder>
Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
</copyright>
<legalnotice>
<para>Except when explicitly stated as GPL, programming examples within
@ -102,6 +113,13 @@ structs, ioctls) must be noted in more detail in the history chapter
(compat.sgml), along with the possible impact on existing drivers and
applications. -->
<revision>
<revnumber>2.6.33</revnumber>
<date>2009-12-03</date>
<authorinitials>mk</authorinitials>
<revremark>Added documentation for the Digital Video timings API.</revremark>
</revision>
<revision>
<revnumber>2.6.32</revnumber>
<date>2009-08-31</date>
@ -355,7 +373,7 @@ and discussions on the V4L mailing list.</revremark>
</partinfo>
<title>Video for Linux Two API Specification</title>
<subtitle>Revision 2.6.32</subtitle>
<subtitle>Revision 2.6.33</subtitle>
<chapter id="common">
&sub-common;
@ -411,6 +429,7 @@ and discussions on the V4L mailing list.</revremark>
&sub-encoder-cmd;
&sub-enumaudio;
&sub-enumaudioout;
&sub-enum-dv-presets;
&sub-enum-fmt;
&sub-enum-framesizes;
&sub-enum-frameintervals;
@ -421,6 +440,8 @@ and discussions on the V4L mailing list.</revremark>
&sub-g-audioout;
&sub-g-crop;
&sub-g-ctrl;
&sub-g-dv-preset;
&sub-g-dv-timings;
&sub-g-enc-index;
&sub-g-ext-ctrls;
&sub-g-fbuf;
@ -441,6 +462,7 @@ and discussions on the V4L mailing list.</revremark>
&sub-querybuf;
&sub-querycap;
&sub-queryctrl;
&sub-query-dv-preset;
&sub-querystd;
&sub-reqbufs;
&sub-s-hw-freq-seek;

116
Documentation/DocBook/v4l/videodev2.h.xml
View File

@ -733,6 +733,99 @@ struct <link linkend="v4l2-standard">v4l2_standard</link> {
__u32 reserved[4];
};
/*
* V I D E O T I M I N G S D V P R E S E T
*/
struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link> {
__u32 preset;
__u32 reserved[4];
};
/*
* D V P R E S E T S E N U M E R A T I O N
*/
struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link> {
__u32 index;
__u32 preset;
__u8 name[32]; /* Name of the preset timing */
__u32 width;
__u32 height;
__u32 reserved[4];
};
/*
* D V P R E S E T V A L U E S
*/
#define V4L2_DV_INVALID 0
#define V4L2_DV_480P59_94 1 /* BT.1362 */
#define V4L2_DV_576P50 2 /* BT.1362 */
#define V4L2_DV_720P24 3 /* SMPTE 296M */
#define V4L2_DV_720P25 4 /* SMPTE 296M */
#define V4L2_DV_720P30 5 /* SMPTE 296M */
#define V4L2_DV_720P50 6 /* SMPTE 296M */
#define V4L2_DV_720P59_94 7 /* SMPTE 274M */
#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */
#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */
#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */
#define V4L2_DV_1080I25 11 /* BT.1120 */
#define V4L2_DV_1080I50 12 /* SMPTE 296M */
#define V4L2_DV_1080I60 13 /* SMPTE 296M */
#define V4L2_DV_1080P24 14 /* SMPTE 296M */
#define V4L2_DV_1080P25 15 /* SMPTE 296M */
#define V4L2_DV_1080P30 16 /* SMPTE 296M */
#define V4L2_DV_1080P50 17 /* BT.1120 */
#define V4L2_DV_1080P60 18 /* BT.1120 */
/*
* D V B T T I M I N G S
*/
/* BT.656/BT.1120 timing data */
struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link> {
__u32 width; /* width in pixels */
__u32 height; /* height in lines */
__u32 interlaced; /* Interlaced or progressive */
__u32 polarities; /* Positive or negative polarity */
__u64 pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz-&gt;74250000 */
__u32 hfrontporch; /* Horizpontal front porch in pixels */
__u32 hsync; /* Horizontal Sync length in pixels */
__u32 hbackporch; /* Horizontal back porch in pixels */
__u32 vfrontporch; /* Vertical front porch in pixels */
__u32 vsync; /* Vertical Sync length in lines */
__u32 vbackporch; /* Vertical back porch in lines */
__u32 il_vfrontporch; /* Vertical front porch for bottom field of
* interlaced field formats
*/
__u32 il_vsync; /* Vertical sync length for bottom field of
* interlaced field formats
*/
__u32 il_vbackporch; /* Vertical back porch for bottom field of
* interlaced field formats
*/
__u32 reserved[16];
} __attribute__ ((packed));
/* Interlaced or progressive format */
#define V4L2_DV_PROGRESSIVE 0
#define V4L2_DV_INTERLACED 1
/* Polarities. If bit is not set, it is assumed to be negative polarity */
#define V4L2_DV_VSYNC_POS_POL 0x00000001
#define V4L2_DV_HSYNC_POS_POL 0x00000002
/* DV timings */
struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link> {
__u32 type;
union {
struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link> bt;
__u32 reserved[32];
};
} __attribute__ ((packed));
/* Values for the type field */
#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */
/*
* V I D E O I N P U T S
*/
@ -744,7 +837,8 @@ struct <link linkend="v4l2-input">v4l2_input</link> {
__u32 tuner; /* Associated tuner */
v4l2_std_id std;
__u32 status;
__u32 reserved[4];
__u32 capabilities;
__u32 reserved[3];
};
/* Values for the 'type' field */
@ -775,6 +869,11 @@ struct <link linkend="v4l2-input">v4l2_input</link> {
#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */
#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */
/* capabilities flags */
#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
#define V4L2_IN_CAP_CUSTOM_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */
/*
* V I D E O O U T P U T S
*/
@ -785,13 +884,19 @@ struct <link linkend="v4l2-output">v4l2_output</link> {
__u32 audioset; /* Associated audios (bitfield) */
__u32 modulator; /* Associated modulator */
v4l2_std_id std;
__u32 reserved[4];
__u32 capabilities;
__u32 reserved[3];
};
/* Values for the 'type' field */
#define V4L2_OUTPUT_TYPE_MODULATOR 1
#define V4L2_OUTPUT_TYPE_ANALOG 2
#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3
/* capabilities flags */
#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
#define V4L2_OUT_CAP_CUSTOM_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */
/*
* C O N T R O L S
*/
@ -1626,6 +1731,13 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
#endif
#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link>)
#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link>)
#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */

238
Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml Normal file
View File

@ -0,0 +1,238 @@
<refentry id="vidioc-enum-dv-presets">
<refmeta>
<refentrytitle>ioctl VIDIOC_ENUM_DV_PRESETS</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname>VIDIOC_ENUM_DV_PRESETS</refname>
<refpurpose>Enumerate supported Digital Video presets</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>struct v4l2_dv_enum_preset *<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<variablelist>
<varlistentry>
<term><parameter>fd</parameter></term>
<listitem>
<para>&fd;</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>request</parameter></term>
<listitem>
<para>VIDIOC_ENUM_DV_PRESETS</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>argp</parameter></term>
<listitem>
<para></para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Description</title>
<para>To query the attributes of a DV preset, applications initialize the
<structfield>index</structfield> field and zero the reserved array of &v4l2-dv-enum-preset;
and call the <constant>VIDIOC_ENUM_DV_PRESETS</constant> ioctl with a pointer to this
structure. Drivers fill the rest of the structure or return an
&EINVAL; when the index is out of bounds. To enumerate all DV Presets supported,
applications shall begin at index zero, incrementing by one until the
driver returns <errorcode>EINVAL</errorcode>. Drivers may enumerate a
different set of DV presets after switching the video input or
output.</para>
<table pgwide="1" frame="none" id="v4l2-dv-enum-preset">
<title>struct <structname>v4l2_dv_enum_presets</structname></title>
<tgroup cols="3">
&cs-str;
<tbody valign="top">
<row>
<entry>__u32</entry>
<entry><structfield>index</structfield></entry>
<entry>Number of the DV preset, set by the
application.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>preset</structfield></entry>
<entry>This field identifies one of the DV preset values listed in <xref linkend="v4l2-dv-presets-vals"/>.</entry>
</row>
<row>
<entry>__u8</entry>
<entry><structfield>name</structfield>[24]</entry>
<entry>Name of the preset, a NUL-terminated ASCII string, for example: "720P-60", "1080I-60". This information is
intended for the user.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>width</structfield></entry>
<entry>Width of the active video in pixels for the DV preset.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>height</structfield></entry>
<entry>Height of the active video in lines for the DV preset.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[4]</entry>
<entry>Reserved for future extensions. Drivers must set the array to zero.</entry>
</row>
</tbody>
</tgroup>
</table>
<table pgwide="1" frame="none" id="v4l2-dv-presets-vals">
<title>struct <structname>DV Presets</structname></title>
<tgroup cols="3">
&cs-str;
<tbody valign="top">
<row>
<entry>Preset</entry>
<entry>Preset value</entry>
<entry>Description</entry>
</row>
<row>
<entry></entry>
<entry></entry>
<entry></entry>
</row>
<row>
<entry>V4L2_DV_INVALID</entry>
<entry>0</entry>
<entry>Invalid preset value.</entry>
</row>
<row>
<entry>V4L2_DV_480P59_94</entry>
<entry>1</entry>
<entry>720x480 progressive video at 59.94 fps as per BT.1362.</entry>
</row>
<row>
<entry>V4L2_DV_576P50</entry>
<entry>2</entry>
<entry>720x576 progressive video at 50 fps as per BT.1362.</entry>
</row>
<row>
<entry>V4L2_DV_720P24</entry>
<entry>3</entry>
<entry>1280x720 progressive video at 24 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_720P25</entry>
<entry>4</entry>
<entry>1280x720 progressive video at 25 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_720P30</entry>
<entry>5</entry>
<entry>1280x720 progressive video at 30 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_720P50</entry>
<entry>6</entry>
<entry>1280x720 progressive video at 50 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_720P59_94</entry>
<entry>7</entry>
<entry>1280x720 progressive video at 59.94 fps as per SMPTE 274M.</entry>
</row>
<row>
<entry>V4L2_DV_720P60</entry>
<entry>8</entry>
<entry>1280x720 progressive video at 60 fps as per SMPTE 274M/296M.</entry>
</row>
<row>
<entry>V4L2_DV_1080I29_97</entry>
<entry>9</entry>
<entry>1920x1080 interlaced video at 29.97 fps as per BT.1120/SMPTE 274M.</entry>
</row>
<row>
<entry>V4L2_DV_1080I30</entry>
<entry>10</entry>
<entry>1920x1080 interlaced video at 30 fps as per BT.1120/SMPTE 274M.</entry>
</row>
<row>
<entry>V4L2_DV_1080I25</entry>
<entry>11</entry>
<entry>1920x1080 interlaced video at 25 fps as per BT.1120.</entry>
</row>
<row>
<entry>V4L2_DV_1080I50</entry>
<entry>12</entry>
<entry>1920x1080 interlaced video at 50 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_1080I60</entry>
<entry>13</entry>
<entry>1920x1080 interlaced video at 60 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_1080P24</entry>
<entry>14</entry>
<entry>1920x1080 progressive video at 24 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_1080P25</entry>
<entry>15</entry>
<entry>1920x1080 progressive video at 25 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_1080P30</entry>
<entry>16</entry>
<entry>1920x1080 progressive video at 30 fps as per SMPTE 296M.</entry>
</row>
<row>
<entry>V4L2_DV_1080P50</entry>
<entry>17</entry>
<entry>1920x1080 progressive video at 50 fps as per BT.1120.</entry>
</row>
<row>
<entry>V4L2_DV_1080P60</entry>
<entry>18</entry>
<entry>1920x1080 progressive video at 60 fps as per BT.1120.</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
<refsect1>
&return-value;
<variablelist>
<varlistentry>
<term><errorcode>EINVAL</errorcode></term>
<listitem>
<para>The &v4l2-dv-enum-preset; <structfield>index</structfield>
is out of bounds.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
</refentry>
<!--
Local Variables:
mode: sgml
sgml-parent-document: "v4l2.sgml"
indent-tabs-mode: nil
End:
-->

36
Documentation/DocBook/v4l/vidioc-enuminput.xml
View File

@ -124,7 +124,13 @@ current input.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[4]</entry>
<entry><structfield>capabilities</structfield></entry>
<entry>This field provides capabilities for the
input. See <xref linkend="input-capabilities" /> for flags.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[3]</entry>
<entry>Reserved for future extensions. Drivers must set
the array to zero.</entry>
</row>
@ -261,6 +267,34 @@ flag is set Macrovision has been detected.</entry>
</tbody>
</tgroup>
</table>
<!-- Capability flags based on video timings RFC by Muralidharan
Karicheri, titled RFC (v1.2): V4L - Support for video timings at the
input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
-->
<table frame="none" pgwide="1" id="input-capabilities">
<title>Input capabilities</title>
<tgroup cols="3">
&cs-def;
<tbody valign="top">
<row>
<entry><constant>V4L2_IN_CAP_PRESETS</constant></entry>
<entry>0x00000001</entry>
<entry>This input supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
</row>
<row>
<entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry>
<entry>0x00000002</entry>
<entry>This input supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry>
</row>
<row>
<entry><constant>V4L2_IN_CAP_STD</constant></entry>
<entry>0x00000004</entry>
<entry>This input supports setting the TV standard by using VIDIOC_S_STD.</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
<refsect1>

36
Documentation/DocBook/v4l/vidioc-enumoutput.xml
View File

@ -114,7 +114,13 @@ details on video standards and how to switch see <xref
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[4]</entry>
<entry><structfield>capabilities</structfield></entry>
<entry>This field provides capabilities for the
output. See <xref linkend="output-capabilities" /> for flags.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[3]</entry>
<entry>Reserved for future extensions. Drivers must set
the array to zero.</entry>
</row>
@ -147,6 +153,34 @@ CVBS, S-Video, RGB.</entry>
</tgroup>
</table>
<!-- Capabilities flags based on video timings RFC by Muralidharan
Karicheri, titled RFC (v1.2): V4L - Support for video timings at the
input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
-->
<table frame="none" pgwide="1" id="output-capabilities">
<title>Output capabilities</title>
<tgroup cols="3">
&cs-def;
<tbody valign="top">
<row>
<entry><constant>V4L2_OUT_CAP_PRESETS</constant></entry>
<entry>0x00000001</entry>
<entry>This output supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
</row>
<row>
<entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry>
<entry>0x00000002</entry>
<entry>This output supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry>
</row>
<row>
<entry><constant>V4L2_OUT_CAP_STD</constant></entry>
<entry>0x00000004</entry>
<entry>This output supports setting the TV standard by using VIDIOC_S_STD.</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
<refsect1>
&return-value;

111
Documentation/DocBook/v4l/vidioc-g-dv-preset.xml Normal file
View File

@ -0,0 +1,111 @@
<refentry id="vidioc-g-dv-preset">
<refmeta>
<refentrytitle>ioctl VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname>VIDIOC_G_DV_PRESET</refname>
<refname>VIDIOC_S_DV_PRESET</refname>
<refpurpose>Query or select the DV preset of the current input or output</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>&v4l2-dv-preset;
*<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<variablelist>
<varlistentry>
<term><parameter>fd</parameter></term>
<listitem>
<para>&fd;</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>request</parameter></term>
<listitem>
<para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>argp</parameter></term>
<listitem>
<para></para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Description</title>
<para>To query and select the current DV preset, applications
use the <constant>VIDIOC_G_DV_PRESET</constant> and <constant>VIDIOC_S_DV_PRESET</constant>
ioctls which take a pointer to a &v4l2-dv-preset; type as argument.
Applications must zero the reserved array in &v4l2-dv-preset;.
<constant>VIDIOC_G_DV_PRESET</constant> returns a dv preset in the field
<structfield>preset</structfield> of &v4l2-dv-preset;.</para>
<para><constant>VIDIOC_S_DV_PRESET</constant> accepts a pointer to a &v4l2-dv-preset;
that has the preset value to be set. Applications must zero the reserved array in &v4l2-dv-preset;.
If the preset is not supported, it returns an &EINVAL; </para>
</refsect1>
<refsect1>
&return-value;
<variablelist>
<varlistentry>
<term><errorcode>EINVAL</errorcode></term>
<listitem>
<para>This ioctl is not supported, or the
<constant>VIDIOC_S_DV_PRESET</constant>,<constant>VIDIOC_S_DV_PRESET</constant> parameter was unsuitable.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><errorcode>EBUSY</errorcode></term>
<listitem>
<para>The device is busy and therefore can not change the preset.</para>
</listitem>
</varlistentry>
</variablelist>
<table pgwide="1" frame="none" id="v4l2-dv-preset">
<title>struct <structname>v4l2_dv_preset</structname></title>
<tgroup cols="3">
&cs-str;
<tbody valign="top">
<row>
<entry>__u32</entry>
<entry><structfield>preset</structfield></entry>
<entry>Preset value to represent the digital video timings</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved[4]</structfield></entry>
<entry>Reserved fields for future use</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
</refentry>
<!--
Local Variables:
mode: sgml
sgml-parent-document: "v4l2.sgml"
indent-tabs-mode: nil
End:
-->

224
Documentation/DocBook/v4l/vidioc-g-dv-timings.xml Normal file
View File

@ -0,0 +1,224 @@
<refentry id="vidioc-g-dv-timings">
<refmeta>
<refentrytitle>ioctl VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname>VIDIOC_G_DV_TIMINGS</refname>
<refname>VIDIOC_S_DV_TIMINGS</refname>
<refpurpose>Get or set custom DV timings for input or output</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>&v4l2-dv-timings;
*<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<variablelist>
<varlistentry>
<term><parameter>fd</parameter></term>
<listitem>
<para>&fd;</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>request</parameter></term>
<listitem>
<para>VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>argp</parameter></term>
<listitem>
<para></para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Description</title>
<para>To set custom DV timings for the input or output, applications use the
<constant>VIDIOC_S_DV_TIMINGS</constant> ioctl and to get the current custom timings,
applications use the <constant>VIDIOC_G_DV_TIMINGS</constant> ioctl. The detailed timing
information is filled in using the structure &v4l2-dv-timings;. These ioctls take
a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not supported
or the timing values are not correct, the driver returns &EINVAL;.</para>
</refsect1>
<refsect1>
&return-value;
<variablelist>
<varlistentry>
<term><errorcode>EINVAL</errorcode></term>
<listitem>
<para>This ioctl is not supported, or the
<constant>VIDIOC_S_DV_TIMINGS</constant> parameter was unsuitable.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><errorcode>EBUSY</errorcode></term>
<listitem>
<para>The device is busy and therefore can not change the timings.</para>
</listitem>
</varlistentry>
</variablelist>
<table pgwide="1" frame="none" id="v4l2-bt-timings">
<title>struct <structname>v4l2_bt_timings</structname></title>
<tgroup cols="3">
&cs-str;
<tbody valign="top">
<row>
<entry>__u32</entry>
<entry><structfield>width</structfield></entry>
<entry>Width of the active video in pixels</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>height</structfield></entry>
<entry>Height of the active video in lines</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>interlaced</structfield></entry>
<entry>Progressive (0) or interlaced (1)</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>polarities</structfield></entry>
<entry>This is a bit mask that defines polarities of sync signals.
bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_HSYNC_POS_POL) is for horizontal sync polarity. If the bit is set
(1) it is positive polarity and if is cleared (0), it is negative polarity.</entry>
</row>
<row>
<entry>__u64</entry>
<entry><structfield>pixelclock</structfield></entry>
<entry>Pixel clock in Hz. Ex. 74.25MHz->74250000</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>hfrontporch</structfield></entry>
<entry>Horizontal front porch in pixels</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>hsync</structfield></entry>
<entry>Horizontal sync length in pixels</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>hbackporch</structfield></entry>
<entry>Horizontal back porch in pixels</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>vfrontporch</structfield></entry>
<entry>Vertical front porch in lines</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>vsync</structfield></entry>
<entry>Vertical sync length in lines</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>vbackporch</structfield></entry>
<entry>Vertical back porch in lines</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>il_vfrontporch</structfield></entry>
<entry>Vertical front porch in lines for bottom field of interlaced field formats</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>il_vsync</structfield></entry>
<entry>Vertical sync length in lines for bottom field of interlaced field formats</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>il_vbackporch</structfield></entry>
<entry>Vertical back porch in lines for bottom field of interlaced field formats</entry>
</row>
</tbody>
</tgroup>
</table>
<table pgwide="1" frame="none" id="v4l2-dv-timings">
<title>struct <structname>v4l2_dv_timings</structname></title>
<tgroup cols="4">
&cs-str;
<tbody valign="top">
<row>
<entry>__u32</entry>
<entry><structfield>type</structfield></entry>
<entry></entry>
<entry>Type of DV timings as listed in <xref linkend="dv-timing-types"/>.</entry>
</row>
<row>
<entry>union</entry>
<entry><structfield></structfield></entry>
<entry></entry>
</row>
<row>
<entry></entry>
<entry>&v4l2-bt-timings;</entry>
<entry><structfield>bt</structfield></entry>
<entry>Timings defined by BT.656/1120 specifications</entry>
</row>
<row>
<entry></entry>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[32]</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table pgwide="1" frame="none" id="dv-timing-types">
<title>DV Timing types</title>
<tgroup cols="3">
&cs-str;
<tbody valign="top">
<row>
<entry>Timing type</entry>
<entry>value</entry>
<entry>Description</entry>
</row>
<row>
<entry></entry>
<entry></entry>
<entry></entry>
</row>
<row>
<entry>V4L2_DV_BT_656_1120</entry>
<entry>0</entry>
<entry>BT.656/1120 timings</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
</refentry>
<!--
Local Variables:
mode: sgml
sgml-parent-document: "v4l2.sgml"
indent-tabs-mode: nil
End:
-->

6
Documentation/DocBook/v4l/vidioc-g-std.xml
View File

@ -86,6 +86,12 @@ standards.</para>
<constant>VIDIOC_S_STD</constant> parameter was unsuitable.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><errorcode>EBUSY</errorcode></term>
<listitem>
<para>The device is busy and therefore can not change the standard</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
</refentry>

85
Documentation/DocBook/v4l/vidioc-query-dv-preset.xml Normal file
View File

@ -0,0 +1,85 @@
<refentry id="vidioc-query-dv-preset">
<refmeta>
<refentrytitle>ioctl VIDIOC_QUERY_DV_PRESET</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname>VIDIOC_QUERY_DV_PRESET</refname>
<refpurpose>Sense the DV preset received by the current
input</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>&v4l2-dv-preset; *<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<variablelist>
<varlistentry>
<term><parameter>fd</parameter></term>
<listitem>
<para>&fd;</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>request</parameter></term>
<listitem>
<para>VIDIOC_QUERY_DV_PRESET</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>argp</parameter></term>
<listitem>
<para></para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Description</title>
<para>The hardware may be able to detect the current DV preset
automatically, similar to sensing the video standard. To do so, applications
call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
returned in the preset field of &v4l2-dv-preset;. When detection is not
possible or fails, the value V4L2_DV_INVALID is returned.</para>
</refsect1>
<refsect1>
&return-value;
<variablelist>
<varlistentry>
<term><errorcode>EINVAL</errorcode></term>
<listitem>
<para>This ioctl is not supported.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><errorcode>EBUSY</errorcode></term>
<listitem>
<para>The device is busy and therefore can not sense the preset</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
</refentry>
<!--
Local Variables:
mode: sgml
sgml-parent-document: "v4l2.sgml"
indent-tabs-mode: nil
End:
-->

6
Documentation/DocBook/v4l/vidioc-querystd.xml
View File

@ -70,6 +70,12 @@ current video input or output.</para>
<para>This ioctl is not supported.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><errorcode>EBUSY</errorcode></term>
<listitem>
<para>The device is busy and therefore can not detect the standard</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
</refentry>

5
Documentation/SubmitChecklist
View File

@ -15,7 +15,7 @@ kernel patches.
2: Passes allnoconfig, allmodconfig
3: Builds on multiple CPU architectures by using local cross-compile tools
or something like PLM at OSDL.
or some other build farm.
4: ppc64 is a good architecture for cross-compilation checking because it
tends to use `unsigned long' for 64-bit quantities.
@ -88,3 +88,6 @@ kernel patches.
24: All memory barriers {e.g., barrier(), rmb(), wmb()} need a comment in the
source code that explains the logic of what they are doing and why.
25: If any ioctl's are added by the patch, then also update
Documentation/ioctl/ioctl-number.txt.

66
Documentation/acpi/method-customizing.txt Normal file
View File

@ -0,0 +1,66 @@
Linux ACPI Custom Control Method How To
=======================================
Written by Zhang Rui <rui.zhang@intel.com>
Linux supports customizing ACPI control methods at runtime.
Users can use this to
1. override an existing method which may not work correctly,
or just for debugging purposes.
2. insert a completely new method in order to create a missing
method such as _OFF, _ON, _STA, _INI, etc.
For these cases, it is far simpler to dynamically install a single
control method rather than override the entire DSDT, because kernel
rebuild/reboot is not needed and test result can be got in minutes.
Note: Only ACPI METHOD can be overridden, any other object types like
"Device", "OperationRegion", are not recognized.
Note: The same ACPI control method can be overridden for many times,
and it's always the latest one that used by Linux/kernel.
1. override an existing method
a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat"
b) disassemble the table by running "iasl -d dsdt.dat".
c) rewrite the ASL code of the method and save it in a new file,
d) package the new file (psr.asl) to an ACPI table format.
Here is an example of a customized \_SB._AC._PSR method,
DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715)
{
External (ACON)
Method (\_SB_.AC._PSR, 0, NotSerialized)
{
Store ("In AC _PSR", Debug)
Return (ACON)
}
}
Note that the full pathname of the method in ACPI namespace
should be used.
And remember to use "External" to declare external objects.
e) assemble the file to generate the AML code of the method.
e.g. "iasl psr.asl" (psr.aml is generated as a result)
f) mount debugfs by "mount -t debugfs none /sys/kernel/debug"
g) override the old method via the debugfs by running
"cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method"
2. insert a new method
This is easier than overriding an existing method.
We just need to create the ASL code of the method we want to
insert and then follow the step c) ~ g) in section 1.
3. undo your changes
The "undo" operation is not supported for a new inserted method
right now, i.e. we can not remove a method currently.
For an overrided method, in order to undo your changes, please
save a copy of the method original ASL code in step c) section 1,
and redo step c) ~ g) to override the method with the original one.
Note: We can use a kernel with multiple custom ACPI method running,
But each individual write to debugfs can implement a SINGLE
method override. i.e. if we want to insert/override multiple
ACPI methods, we need to redo step c) ~ g) for multiple times.

3
Documentation/blackfin/00-INDEX
View File

@ -1,9 +1,6 @@
00-INDEX
- This file
cache-lock.txt
- HOWTO for blackfin cache locking.
cachefeatures.txt
- Supported cache features.

6
Documentation/blackfin/Makefile Normal file
View File

@ -0,0 +1,6 @@
obj-m := gptimers-example.o
all: modules
modules clean:
$(MAKE) -C ../.. SUBDIRS=$(PWD) $@

48
Documentation/blackfin/cache-lock.txt
View File

@ -1,48 +0,0 @@
/*
* File: Documentation/blackfin/cache-lock.txt
* Based on:
* Author:
*
* Created:
* Description: This file contains the simple DMA Implementation for Blackfin
*
* Rev: $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
*/
How to lock your code in cache in uClinux/blackfin
--------------------------------------------------
There are only a few steps required to lock your code into the cache.
Currently you can lock the code by Way.
Below are the interface provided for locking the cache.
1. cache_grab_lock(int Ways);
This function grab the lock for locking your code into the cache specified
by Ways.
2. cache_lock(int Ways);
This function should be called after your critical code has been executed.
Once the critical code exits, the code is now loaded into the cache. This
function locks the code into the cache.
So, the example sequence will be:
cache_grab_lock(WAY0_L); /* Grab the lock */
critical_code(); /* Execute the code of interest */
cache_lock(WAY0_L); /* Lock the cache */
Where WAY0_L signifies WAY0 locking.

10
Documentation/blackfin/cachefeatures.txt
View File

@ -41,16 +41,6 @@
icplb_flush();
dcplb_flush();
- Locking the cache.
cache_grab_lock();
cache_lock();
Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to
lock the cache.
Locking the cache is optional feature.
- Miscellaneous cache functions.
flush_cache_all();

83
Documentation/blackfin/gptimers-example.c Normal file
View File

@ -0,0 +1,83 @@
/*
* Simple gptimers example
* http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers
*
* Copyright 2007-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/gptimers.h>
#include <asm/portmux.h>
/* ... random driver includes ... */
#define DRIVER_NAME "gptimer_example"
struct gptimer_data {
uint32_t period, width;
};
static struct gptimer_data data;
/* ... random driver state ... */
static irqreturn_t gptimer_example_irq(int irq, void *dev_id)
{
struct gptimer_data *data = dev_id;
/* make sure it was our timer which caused the interrupt */
if (!get_gptimer_intr(TIMER5_id))
return IRQ_NONE;
/* read the width/period values that were captured for the waveform */
data->width = get_gptimer_pwidth(TIMER5_id);
data->period = get_gptimer_period(TIMER5_id);
/* acknowledge the interrupt */
clear_gptimer_intr(TIMER5_id);
/* tell the upper layers we took care of things */
return IRQ_HANDLED;
}
/* ... random driver code ... */
static int __init gptimer_example_init(void)
{
int ret;
/* grab the peripheral pins */
ret = peripheral_request(P_TMR5, DRIVER_NAME);
if (ret) {
printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n");
return ret;
}
/* grab the IRQ for the timer */
ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data);
if (ret) {
printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");
peripheral_free(P_TMR5);
return ret;
}
/* setup the timer and enable it */
set_gptimer_config(TIMER5_id, WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA);
enable_gptimers(TIMER5bit);
return 0;
}
module_init(gptimer_example_init);
static void __exit gptimer_example_exit(void)
{
disable_gptimers(TIMER5bit);
free_irq(IRQ_TIMER5, &data);
peripheral_free(P_TMR5);
}
module_exit(gptimer_example_exit);
MODULE_LICENSE("BSD");

49
Documentation/cpu-hotplug.txt
View File

@ -315,41 +315,26 @@ A: The following are what is required for CPU hotplug infrastructure to work
Q: I need to ensure that a particular cpu is not removed when there is some
work specific to this cpu is in progress.
A: First switch the current thread context to preferred cpu
A: There are two ways. If your code can be run in interrupt context, use
smp_call_function_single(), otherwise use work_on_cpu(). Note that
work_on_cpu() is slow, and can fail due to out of memory:
int my_func_on_cpu(int cpu)
{
cpumask_t saved_mask, new_mask = CPU_MASK_NONE;
int curr_cpu, err = 0;
saved_mask = current->cpus_allowed;
cpu_set(cpu, new_mask);
err = set_cpus_allowed(current, new_mask);
if (err)
return err;
/*
* If we got scheduled out just after the return from
* set_cpus_allowed() before running the work, this ensures
* we stay locked.
*/
curr_cpu = get_cpu();
if (curr_cpu != cpu) {
err = -EAGAIN;
goto ret;
} else {
/*
* Do work : But cant sleep, since get_cpu() disables preempt
*/
}
ret:
put_cpu();
set_cpus_allowed(current, saved_mask);
return err;
}
int err;
get_online_cpus();
if (!cpu_online(cpu))
err = -EINVAL;
else
#if NEEDS_BLOCKING
err = work_on_cpu(cpu, __my_func_on_cpu, NULL);
#else
smp_call_function_single(cpu, __my_func_on_cpu, &err,
true);
#endif
put_online_cpus();
return err;
}
Q: How do we determine how many CPUs are available for hotplug.
A: There is no clear spec defined way from ACPI that can give us that

64
Documentation/device-mapper/snapshot.txt
View File

@ -8,13 +8,19 @@ the block device which are also writable without interfering with the
original content;
*) To create device "forks", i.e. multiple different versions of the
same data stream.
*) To merge a snapshot of a block device back into the snapshot's origin
device.
In the first two cases, dm copies only the chunks of data that get
changed and uses a separate copy-on-write (COW) block device for
storage.
For snapshot merge the contents of the COW storage are merged back into
the origin device.
In both cases, dm copies only the chunks of data that get changed and
uses a separate copy-on-write (COW) block device for storage.
There are two dm targets available: snapshot and snapshot-origin.
There are three dm targets available:
snapshot, snapshot-origin, and snapshot-merge.
*) snapshot-origin <origin>
@ -40,8 +46,25 @@ The difference is that for transient snapshots less metadata must be
saved on disk - they can be kept in memory by the kernel.
How this is used by LVM2
========================
* snapshot-merge <origin> <COW device> <persistent> <chunksize>
takes the same table arguments as the snapshot target except it only
works with persistent snapshots. This target assumes the role of the
"snapshot-origin" target and must not be loaded if the "snapshot-origin"
is still present for <origin>.
Creates a merging snapshot that takes control of the changed chunks
stored in the <COW device> of an existing snapshot, through a handover
procedure, and merges these chunks back into the <origin>. Once merging
has started (in the background) the <origin> may be opened and the merge
will continue while I/O is flowing to it. Changes to the <origin> are
deferred until the merging snapshot's corresponding chunk(s) have been
merged. Once merging has started the snapshot device, associated with
the "snapshot" target, will return -EIO when accessed.
How snapshot is used by LVM2
============================
When you create the first LVM2 snapshot of a volume, four dm devices are used:
1) a device containing the original mapping table of the source volume;
@ -72,3 +95,30 @@ brw------- 1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
brw------- 1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
brw------- 1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
How snapshot-merge is used by LVM2
==================================
A merging snapshot assumes the role of the "snapshot-origin" while
merging. As such the "snapshot-origin" is replaced with
"snapshot-merge". The "-real" device is not changed and the "-cow"
device is renamed to <origin name>-cow to aid LVM2's cleanup of the
merging snapshot after it completes. The "snapshot" that hands over its
COW device to the "snapshot-merge" is deactivated (unless using lvchange
--refresh); but if it is left active it will simply return I/O errors.
A snapshot will merge into its origin with the following command:
lvconvert --merge volumeGroup/snap
we'll now have this situation:
# dmsetup table|grep volumeGroup
volumeGroup-base-real: 0 2097152 linear 8:19 384
volumeGroup-base-cow: 0 204800 linear 8:19 2097536
volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
# ls -lL /dev/mapper/volumeGroup-*
brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
brw------- 1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
brw------- 1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base

1
Documentation/dontdiff
View File

@ -103,6 +103,7 @@ gconf
gen-devlist
gen_crc32table
gen_init_cpio
generated
genheaders
genksyms
*_gray256.c

4
Documentation/driver-model/driver.txt
View File

@ -226,5 +226,5 @@ struct driver_attribute driver_attr_debug;
This can then be used to add and remove the attribute from the
driver's directory using:
int driver_create_file(struct device_driver *, struct driver_attribute *);
void driver_remove_file(struct device_driver *, struct driver_attribute *);
int driver_create_file(struct device_driver *, const struct driver_attribute *);
void driver_remove_file(struct device_driver *, const struct driver_attribute *);

12
Documentation/fb/viafb.txt
View File

@ -7,7 +7,7 @@
VIA UniChrome Family(CLE266, PM800 / CN400 / CN300,
P4M800CE / P4M800Pro / CN700 / VN800,
CX700 / VX700, K8M890, P4M890,
CN896 / P4M900, VX800)
CN896 / P4M900, VX800, VX855)
[Driver features]
------------------------
@ -154,13 +154,6 @@
0 : No Dual Edge Panel (default)
1 : Dual Edge Panel
viafb_video_dev:
This option is used to specify video output devices(CRT, DVI, LCD) for
duoview case.
For example:
To output video on DVI, we should use:
modprobe viafb viafb_video_dev=DVI...
viafb_lcd_port:
This option is used to specify LCD output port,
available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
@ -181,9 +174,6 @@ Notes:
and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
instead of calling common ioctl function FBIOPUT_VSCREENINFO since
viafb doesn't support multi-head well, or it will cause screen crush.
4. VX800 2D accelerator hasn't been supported in this driver yet. When
using driver on VX800, the driver will disable the acceleration
function as default.
[Configure viafb with "fbset" tool]

35
Documentation/feature-removal-schedule.txt
View File

@ -291,22 +291,6 @@ Who: Michael Buesch <mb@bu3sch.de>
---------------------------
What: usedac i386 kernel parameter
When: 2.6.27
Why: replaced by allowdac and no dac combination
Who: Glauber Costa <gcosta@redhat.com>
---------------------------
What: print_fn_descriptor_symbol()
When: October 2009
Why: The %pF vsprintf format provides the same functionality in a
simpler way. print_fn_descriptor_symbol() is deprecated but
still present to give out-of-tree modules time to change.
Who: Bjorn Helgaas <bjorn.helgaas@hp.com>
---------------------------
What: /sys/o2cb symlink
When: January 2010
Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
@ -490,3 +474,22 @@ Why: Obsoleted by the adt7475 driver.
Who: Jean Delvare <khali@linux-fr.org>
---------------------------
What: Support for lcd_switch and display_get in asus-laptop driver
When: March 2010
Why: These two features use non-standard interfaces. There are the
only features that really need multiple path to guess what's
the right method name on a specific laptop.
Removing them will allow to remove a lot of code an significantly
clean the drivers.
This will affect the backlight code which won't be able to know
if the backlight is on or off. The platform display file will also be
write only (like the one in eeepc-laptop).
This should'nt affect a lot of user because they usually know
when their display is on or off.
Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------

12
Documentation/filesystems/00-INDEX
View File

@ -1,7 +1,5 @@
00-INDEX
- this file (info on some of the filesystems supported by linux).
Exporting
- explanation of how to make filesystems exportable.
Locking
- info on locking rules as they pertain to Linux VFS.
9p.txt
@ -68,12 +66,8 @@ mandatory-locking.txt
- info on the Linux implementation of Sys V mandatory file locking.
ncpfs.txt
- info on Novell Netware(tm) filesystem using NCP protocol.
nfs41-server.txt
- info on the Linux server implementation of NFSv4 minor version 1.
nfs-rdma.txt
- how to install and setup the Linux NFS/RDMA client and server software.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
nfs/
- nfs-related documentation.
nilfs2.txt
- info and mount options for the NILFS2 filesystem.
ntfs.txt
@ -92,8 +86,6 @@ relay.txt
- info on relay, for efficient streaming from kernel to user space.
romfs.txt
- description of the ROMFS filesystem.
rpc-cache.txt
- introduction to the caching mechanisms in the sunrpc layer.
seq_file.txt
- how to use the seq_file API
sharedsubtree.txt

16
Documentation/filesystems/nfs/00-INDEX Normal file
View File

@ -0,0 +1,16 @@
00-INDEX
- this file (nfs-related documentation).
Exporting
- explanation of how to make filesystems exportable.
knfsd-stats.txt
- statistics which the NFS server makes available to user space.
nfs.txt
- nfs client, and DNS resolution for fs_locations.
nfs41-server.txt
- info on the Linux server implementation of NFSv4 minor version 1.
nfs-rdma.txt
- how to install and setup the Linux NFS/RDMA client and server software
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
rpc-cache.txt
- introduction to the caching mechanisms in the sunrpc layer.

0
Documentation/filesystems/Exporting → Documentation/filesystems/nfs/Exporting
View File

0
Documentation/filesystems/knfsd-stats.txt → Documentation/filesystems/nfs/knfsd-stats.txt
View File

0
Documentation/filesystems/nfs-rdma.txt → Documentation/filesystems/nfs/nfs-rdma.txt
View File

0
Documentation/filesystems/nfs.txt → Documentation/filesystems/nfs/nfs.txt
View File

9
Documentation/filesystems/nfs41-server.txt → Documentation/filesystems/nfs/nfs41-server.txt
View File

@ -41,7 +41,7 @@ interoperability problems with future clients. Known issues:
conformant with the spec (for example, we don't use kerberos
on the backchannel correctly).
- no trunking support: no clients currently take advantage of
trunking, but this is a mandatory failure, and its use is
trunking, but this is a mandatory feature, and its use is
recommended to clients in a number of places. (E.g. to ensure
timely renewal in case an existing connection's retry timeouts
have gotten too long; see section 8.3 of the draft.)
@ -213,3 +213,10 @@ The following cases aren't supported yet:
DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID.
* DESTROY_SESSION MUST be the final operation in the COMPOUND request.
Nonstandard compound limitations:
* No support for a sessions fore channel RPC compound that requires both a
ca_maxrequestsize request and a ca_maxresponsesize reply, so we may
fail to live up to the promise we made in CREATE_SESSION fore channel
negotiation.
* No more than one IO operation (read, write, readdir) allowed per
compound.

0
Documentation/filesystems/nfsroot.txt → Documentation/filesystems/nfs/nfsroot.txt
View File

0
Documentation/filesystems/rpc-cache.txt → Documentation/filesystems/nfs/rpc-cache.txt
View File

2
Documentation/filesystems/porting
View File

@ -140,7 +140,7 @@ Callers of notify_change() need ->i_mutex now.
New super_block field "struct export_operations *s_export_op" for
explicit support for exporting, e.g. via NFS. The structure is fully
documented at its declaration in include/linux/fs.h, and in
Documentation/filesystems/Exporting.
Documentation/filesystems/nfs/Exporting.
Briefly it allows for the definition of decode_fh and encode_fh operations
to encode and decode filehandles, and allows the filesystem to use

9
Documentation/filesystems/proc.txt
View File

@ -38,6 +38,7 @@ Table of Contents
3.3 /proc/<pid>/io - Display the IO accounting fields
3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
3.5 /proc/<pid>/mountinfo - Information about mounts
3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
------------------------------------------------------------------------------
@ -1409,3 +1410,11 @@ For more information on mount propagation see:
Documentation/filesystems/sharedsubtree.txt
3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
--------------------------------------------------------
These files provide a method to access a tasks comm value. It also allows for
a task to set its own or one of its thread siblings comm value. The comm value
is limited in size compared to the cmdline value, so writing anything longer
then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
comm value.

4
Documentation/filesystems/seq_file.txt
View File

@ -248,9 +248,7 @@ code, that is done in the initialization code in the usual way:
{
struct proc_dir_entry *entry;
entry = create_proc_entry("sequence", 0, NULL);
if (entry)
entry->proc_fops = &ct_file_ops;
proc_create("sequence", 0, NULL, &ct_file_ops);
return 0;
}

12
Documentation/filesystems/sysfs.txt
View File

@ -91,8 +91,8 @@ struct device_attribute {
const char *buf, size_t count);
};
int device_create_file(struct device *, struct device_attribute *);
void device_remove_file(struct device *, struct device_attribute *);
int device_create_file(struct device *, const struct device_attribute *);
void device_remove_file(struct device *, const struct device_attribute *);
It also defines this helper for defining device attributes:
@ -316,8 +316,8 @@ DEVICE_ATTR(_name, _mode, _show, _store);
Creation/Removal:
int device_create_file(struct device *device, struct device_attribute * attr);
void device_remove_file(struct device * dev, struct device_attribute * attr);
int device_create_file(struct device *dev, const struct device_attribute * attr);
void device_remove_file(struct device *dev, const struct device_attribute * attr);
- bus drivers (include/linux/device.h)
@ -358,7 +358,7 @@ DRIVER_ATTR(_name, _mode, _show, _store)
Creation/Removal:
int driver_create_file(struct device_driver *, struct driver_attribute *);
void driver_remove_file(struct device_driver *, struct driver_attribute *);
int driver_create_file(struct device_driver *, const struct driver_attribute *);
void driver_remove_file(struct device_driver *, const struct driver_attribute *);

15
Documentation/gpio.txt
View File

@ -531,6 +531,13 @@ and have the following read/write attributes:
This file exists only if the pin can be configured as an
interrupt generating input pin.
"active_low" ... reads as either 0 (false) or 1 (true). Write
any nonzero value to invert the value attribute both
for reading and writing. Existing and subsequent
poll(2) support configuration via the edge attribute
for "rising" and "falling" edges will follow this
setting.
GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
controller implementing GPIOs starting at #42) and have the following
read-only attributes:
@ -566,6 +573,8 @@ requested using gpio_request():
int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
/* change the polarity of a GPIO node in sysfs */
int gpio_sysfs_set_active_low(unsigned gpio, int value);
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpio_export(). The driver can control whether the
@ -580,3 +589,9 @@ After the GPIO has been exported, gpio_export_link() allows creating
symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
use this to provide the interface under their own device in sysfs with
a descriptive name.
Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
differences between boards from user space. This only affects the
sysfs interface. Polarity change can be done both before and after
gpio_export(), and previously enabled poll(2) support for either
rising or falling edge will be reconfigured to follow this setting.

60
Documentation/hwmon/k10temp Normal file
View File

@ -0,0 +1,60 @@
Kernel driver k10temp
=====================
Supported chips:
* AMD Family 10h processors:
Socket F: Quad-Core/Six-Core/Embedded Opteron
Socket AM2+: Opteron, Phenom (II) X3/X4
Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
Prefix: 'k10temp'
Addresses scanned: PCI space
Datasheets:
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
http://support.amd.com/us/Processor_TechDocs/43373.pdf
AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
http://support.amd.com/us/Processor_TechDocs/43374.pdf
AMD Family 10h Desktop Processor Power and Thermal Data Sheet:
http://support.amd.com/us/Processor_TechDocs/43375.pdf
Author: Clemens Ladisch <clemens@ladisch.de>
Description
-----------
This driver permits reading of the internal temperature sensor of AMD
Family 10h and 11h processors.
All these processors have a sensor, but on older revisions of Family 10h
processors, the sensor may return inconsistent values (erratum 319). The
driver will refuse to load on these revisions unless you specify the
"force=1" module parameter.
There is one temperature measurement value, available as temp1_input in
sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
Please note that it is defined as a relative value; to quote the AMD manual:
Tctl is the processor temperature control value, used by the platform to
control cooling systems. Tctl is a non-physical temperature on an
arbitrary scale measured in degrees. It does _not_ represent an actual
physical temperature like die or case temperature. Instead, it specifies
the processor temperature relative to the point at which the system must
supply the maximum cooling for the processor's specified maximum case
temperature and maximum thermal power dissipation.
The maximum value for Tctl is available in the file temp1_max.
If the BIOS has enabled hardware temperature control, the threshold at
which the processor will throttle itself to avoid damage is available in
temp1_crit and temp1_crit_hyst.

55
Documentation/hwmon/lis3lv02d
View File

@ -3,7 +3,8 @@ Kernel driver lis3lv02d
Supported chips:
* STMicroelectronics LIS3LV02DL and LIS3LV02DQ
* STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision)
* STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits)
Authors:
Yan Burman <burman.yan@gmail.com>
@ -13,32 +14,52 @@ Authors:
Description
-----------
This driver provides support for the accelerometer found in various HP
laptops sporting the feature officially called "HP Mobile Data
Protection System 3D" or "HP 3D DriveGuard". It detects automatically
laptops with this sensor. Known models (for now the HP 2133, nc6420,
nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
automatically oriented on standard way (eg: you can directly play
neverball). The accelerometer data is readable via
/sys/devices/platform/lis3lv02d.
This driver provides support for the accelerometer found in various HP laptops
sporting the feature officially called "HP Mobile Data Protection System 3D" or
"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known
models (full list can be found in drivers/hwmon/hp_accel.c) will have their
axis automatically oriented on standard way (eg: you can directly play
neverball). The accelerometer data is readable via
/sys/devices/platform/lis3lv02d. Reported values are scaled
to mg values (1/1000th of earth gravity).
Sysfs attributes under /sys/devices/platform/lis3lv02d/:
position - 3D position that the accelerometer reports. Format: "(x,y,z)"
calibrate - read: values (x, y, z) that are used as the base for input
class device operation.
write: forces the base to be recalibrated with the current
position.
rate - reports the sampling rate of the accelerometer device in HZ
rate - read reports the sampling rate of the accelerometer device in HZ.
write changes sampling rate of the accelerometer device.
Only values which are supported by HW are accepted.
selftest - performs selftest for the chip as specified by chip manufacturer.
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
the laptop to act as a pinball machine-esque joystick. Joystick device can be
calibrated. Joystick device can be in two different modes.
By default output values are scaled between -32768 .. 32767. In joystick raw
mode, joystick and sysfs position entry have the same scale. There can be
small difference due to input system fuzziness feature.
Events are also available as input event device.
Selftest is meant only for hardware diagnostic purposes. It is not meant to be
used during normal operations. Position data is not corrupted during selftest
but interrupt behaviour is not guaranteed to work reliably. In test mode, the
sensing element is internally moved little bit. Selftest measures difference
between normal mode and test mode. Chip specifications tell the acceptance
limit for each type of the chip. Limits are provided via platform data
to allow adjustment of the limits without a change to the actual driver.
Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are
measured difference between modes. Axes are not remapped in selftest mode.
Measurement values are provided to help HW diagnostic applications to make
final decision.
On HP laptops, if the led infrastructure is activated, support for a led
indicating disk protection will be provided as /sys/class/leds/hp::hddprotect.
Another feature of the driver is misc device called "freefall" that
acts similar to /dev/rtc and reacts on free-fall interrupts received
from the device. It supports blocking operations, poll/select and
fasync operation modes. You must read 1 bytes from the device. The
result is number of free-fall interrupts since the last successful
read (or 255 if number of interrupts would not fit).
read (or 255 if number of interrupts would not fit). See the hpfall.c
file for an example on using the device.
Axes orientation
@ -55,7 +76,7 @@ the accelerometer are converted into a "standard" organisation of the axes
* If the laptop is put upside-down, Z becomes negative
If your laptop model is not recognized (cf "dmesg"), you can send an
email to the authors to add it to the database. When reporting a new
email to the maintainer to add it to the database. When reporting a new
laptop, please include the output of "dmidecode" plus the value of
/sys/devices/platform/lis3lv02d/position in these four cases.

10
Documentation/hwmon/w83627ehf
View File

@ -81,8 +81,14 @@ pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
pwm[1-4]_enable - this file controls mode of fan/temperature control:
* 1 Manual Mode, write to pwm file any value 0-255 (full speed)
* 2 Thermal Cruise
* 1 Manual mode, write to pwm file any value 0-255 (full speed)
* 2 "Thermal Cruise" mode
* 3 "Fan Speed Cruise" mode
* 4 "Smart Fan III" mode
pwm[1-4]_mode - controls if output is PWM or DC level
* 0 DC output (0 - 12v)
* 1 PWM output
Thermal Cruise mode
-------------------

2
Documentation/i2c/writing-clients
View File

@ -44,7 +44,7 @@ static struct i2c_driver foo_driver = {
/* if device autodetection is needed: */
.class = I2C_CLASS_SOMETHING,
.detect = foo_detect,
.address_data = &addr_data,
.address_list = normal_i2c,
.shutdown = foo_shutdown, /* optional */
.suspend = foo_suspend, /* optional */

10
Documentation/infiniband/ipoib.txt
View File

@ -36,11 +36,11 @@ Datagram vs Connected modes
fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes.
In connected mode, the IB RC (Reliable Connected) transport is used.
Connected mode is to takes advantage of the connected nature of the
IB transport and allows an MTU up to the maximal IP packet size of
64K, which reduces the number of IP packets needed for handling
large UDP datagrams, TCP segments, etc and increases the performance
for large messages.
Connected mode takes advantage of the connected nature of the IB
transport and allows an MTU up to the maximal IP packet size of 64K,
which reduces the number of IP packets needed for handling large UDP
datagrams, TCP segments, etc and increases the performance for large
messages.
In connected mode, the interface's UD QP is still used for multicast
and communication with peers that don't support connected mode. In

14
Documentation/kbuild/kbuild.txt
View File

@ -1,3 +1,17 @@
Output files
modules.order
--------------------------------------------------
This file records the order in which modules appear in Makefiles. This
is used by modprobe to deterministically resolve aliases that match
multiple modules.
modules.builtin
--------------------------------------------------
This file lists all modules that are built into the kernel. This is used
by modprobe to not fail when trying to load something builtin.
Environment variables
KCPPFLAGS

8
Documentation/kbuild/kconfig.txt
View File

@ -103,10 +103,16 @@ KCONFIG_AUTOCONFIG
This environment variable can be set to specify the path & name of the
"auto.conf" file. Its default value is "include/config/auto.conf".
KCONFIG_TRISTATE
--------------------------------------------------
This environment variable can be set to specify the path & name of the
"tristate.conf" file. Its default value is "include/config/tristate.conf".
KCONFIG_AUTOHEADER
--------------------------------------------------
This environment variable can be set to specify the path & name of the
"autoconf.h" (header) file. Its default value is "include/linux/autoconf.h".
"autoconf.h" (header) file.
Its default value is "include/generated/autoconf.h".
======================================================================

11
Documentation/kernel-parameters.txt
View File

@ -1032,7 +1032,7 @@ and is between 256 and 4096 characters. It is defined in the file
No delay
ip= [IP_PNP]
See Documentation/filesystems/nfsroot.txt.
See Documentation/filesystems/nfs/nfsroot.txt.
ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
See comment before ip2_setup() in
@ -1553,10 +1553,10 @@ and is between 256 and 4096 characters. It is defined in the file
going to be removed in 2.6.29.
nfsaddrs= [NFS]
See Documentation/filesystems/nfsroot.txt.
See Documentation/filesystems/nfs/nfsroot.txt.
nfsroot= [NFS] nfs root filesystem for disk-less boxes.
See Documentation/filesystems/nfsroot.txt.
See Documentation/filesystems/nfs/nfsroot.txt.
nfs.callback_tcpport=
[NFS] set the TCP port on which the NFSv4 callback
@ -2729,6 +2729,11 @@ and is between 256 and 4096 characters. It is defined in the file
vmpoff= [KNL,S390] Perform z/VM CP command after power off.
Format: <command>
vt.cur_default= [VT] Default cursor shape.
Format: 0xCCBBAA, where AA, BB, and CC are the same as
the parameters of the <Esc>[?A;B;Cc escape sequence;
see VGA-softcursor.txt. Default: 2 = underline.
vt.default_blu= [VT]
Format: <blue0>,<blue1>,<blue2>,...,<blue15>
Change the default blue palette of the console.

114
Documentation/laptops/thinkpad-acpi.txt
View File

@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
Version 0.23
April 10th, 2009
Version 0.24
December 11th, 2009
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@ -460,6 +460,8 @@ event code Key Notes
For Lenovo ThinkPads with a new
BIOS, it has to be handled either
by the ACPI OSI, or by userspace.
The driver does the right thing,
never mess with this.
0x1011 0x10 FN+END Brightness down. See brightness
up for details.
@ -582,46 +584,15 @@ with hotkey_report_mode.
Brightness hotkey notes:
These are the current sane choices for brightness key mapping in
thinkpad-acpi:
Don't mess with the brightness hotkeys in a Thinkpad. If you want
notifications for OSD, use the sysfs backlight class event support.
For IBM and Lenovo models *without* ACPI backlight control (the ones on
which thinkpad-acpi will autoload its backlight interface by default,
and on which ACPI video does not export a backlight interface):
1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as
these older firmware versions unfortunately won't respect the hotkey
mask for brightness keys anyway, and always reacts to them. This
usually work fine, unless X.org drivers are doing something to block
the BIOS. In that case, use (3) below. This is the default mode of
operation.
2. Enable the hotkeys, but map them to something else that is NOT
KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause
userspace to try to change the backlight level, and use that as an
on-screen-display hint.
3. IF AND ONLY IF X.org drivers find a way to block the firmware from
automatically changing the brightness, enable the hotkeys and map
them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to
something that calls xbacklight. thinkpad-acpi will not be able to
change brightness in that case either, so you should disable its
backlight interface.
For Lenovo models *with* ACPI backlight control:
1. Load up ACPI video and use that. ACPI video will report ACPI
events for brightness change keys. Do not mess with thinkpad-acpi
defaults in this case. thinkpad-acpi should not have anything to do
with backlight events in a scenario where ACPI video is loaded:
brightness hotkeys must be disabled, and the backlight interface is
to be kept disabled as well. This is the default mode of operation.
2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process
these keys on userspace somehow (e.g. by calling xbacklight).
The driver will do this automatically if it detects that ACPI video
has been disabled.
The driver will issue KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN events
automatically for the cases were userspace has to do something to
implement brightness changes. When you override these events, you will
either fail to handle properly the ThinkPads that require explicit
action to change backlight brightness, or the ThinkPads that require
that no action be taken to work properly.
Bluetooth
@ -1121,25 +1092,61 @@ WARNING:
its level up and down at every change.
Volume control -- /proc/acpi/ibm/volume
---------------------------------------
Volume control
--------------
This feature allows volume control on ThinkPad models which don't have
a hardware volume knob. The available commands are:
procfs: /proc/acpi/ibm/volume
ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
NOTE: by default, the volume control interface operates in read-only
mode, as it is supposed to be used for on-screen-display purposes.
The read/write mode can be enabled through the use of the
"volume_control=1" module parameter.
NOTE: distros are urged to not enable volume_control by default, this
should be done by the local admin only. The ThinkPad UI is for the
console audio control to be done through the volume keys only, and for
the desktop environment to just provide on-screen-display feedback.
Software volume control should be done only in the main AC97/HDA
mixer.
This feature allows volume control on ThinkPad models with a digital
volume knob (when available, not all models have it), as well as
mute/unmute control. The available commands are:
echo up >/proc/acpi/ibm/volume
echo down >/proc/acpi/ibm/volume
echo mute >/proc/acpi/ibm/volume
echo unmute >/proc/acpi/ibm/volume
echo 'level <level>' >/proc/acpi/ibm/volume
The <level> number range is 0 to 15 although not all of them may be
The <level> number range is 0 to 14 although not all of them may be
distinct. The unmute the volume after the mute command, use either the
up or down command (the level command will not unmute the volume).
up or down command (the level command will not unmute the volume), or
the unmute command.
The current volume level and mute state is shown in the file.
The ALSA mixer interface to this feature is still missing, but patches
to add it exist. That problem should be addressed in the not so
distant future.
You can use the volume_capabilities parameter to tell the driver
whether your thinkpad has volume control or mute-only control:
volume_capabilities=1 for mixers with mute and volume control,
volume_capabilities=2 for mixers with only mute control.
If the driver misdetects the capabilities for your ThinkPad model,
please report this to ibm-acpi-devel@lists.sourceforge.net, so that we
can update the driver.
There are two strategies for volume control. To select which one
should be used, use the volume_mode module parameter: volume_mode=1
selects EC mode, and volume_mode=3 selects EC mode with NVRAM backing
(so that volume/mute changes are remembered across shutdown/reboot).
The driver will operate in volume_mode=3 by default. If that does not
work well on your ThinkPad model, please report this to
ibm-acpi-devel@lists.sourceforge.net.
The driver supports the standard ALSA module parameters. If the ALSA
mixer is disabled, the driver will disable all volume functionality.
Fan control and monitoring: fan speed, fan enable/disable
@ -1405,6 +1412,7 @@ to enable more than one output class, just add their values.
0x0008 HKEY event interface, hotkeys
0x0010 Fan control
0x0020 Backlight brightness
0x0040 Audio mixer/volume control
There is also a kernel build option to enable more debugging
information, which may be necessary to debug driver problems.
@ -1465,3 +1473,9 @@ Sysfs interface changelog:
and it is always able to disable hot keys. Very old
thinkpads are properly supported. hotkey_bios_mask
is deprecated and marked for removal.
0x020600: Marker for backlight change event support.
0x020700: Support for mute-only mixers.
Volume control in read-only mode by default.
Marker for ALSA mixer support.

72
Documentation/md.txt
View File

@ -233,9 +233,9 @@ All md devices contain:
resync_start
The point at which resync should start. If no resync is needed,
this will be a very large number. At array creation it will
default to 0, though starting the array as 'clean' will
set it much larger.
this will be a very large number (or 'none' since 2.6.30-rc1). At
array creation it will default to 0, though starting the array as
'clean' will set it much larger.
new_dev
This file can be written but not read. The value written should
@ -296,6 +296,51 @@ All md devices contain:
active-idle
like active, but no writes have been seen for a while (safe_mode_delay).
bitmap/location
This indicates where the write-intent bitmap for the array is
stored.
It can be one of "none", "file" or "[+-]N".
"file" may later be extended to "file:/file/name"
"[+-]N" means that many sectors from the start of the metadata.
This is replicated on all devices. For arrays with externally
managed metadata, the offset is from the beginning of the
device.
bitmap/chunksize
The size, in bytes, of the chunk which will be represented by a
single bit. For RAID456, it is a portion of an individual
device. For RAID10, it is a portion of the array. For RAID1, it
is both (they come to the same thing).
bitmap/time_base
The time, in seconds, between looking for bits in the bitmap to
be cleared. In the current implementation, a bit will be cleared
between 2 and 3 times "time_base" after all the covered blocks
are known to be in-sync.
bitmap/backlog
When write-mostly devices are active in a RAID1, write requests
to those devices proceed in the background - the filesystem (or
other user of the device) does not have to wait for them.
'backlog' sets a limit on the number of concurrent background
writes. If there are more than this, new writes will by
synchronous.
bitmap/metadata
This can be either 'internal' or 'external'.
'internal' is the default and means the metadata for the bitmap
is stored in the first 256 bytes of the allocated space and is
managed by the md module.
'external' means that bitmap metadata is managed externally to
the kernel (i.e. by some userspace program)
bitmap/can_clear
This is either 'true' or 'false'. If 'true', then bits in the
bitmap will be cleared when the corresponding blocks are thought
to be in-sync. If 'false', bits will never be cleared.
This is automatically set to 'false' if a write happens on a
degraded array, or if the array becomes degraded during a write.
When metadata is managed externally, it should be set to true
once the array becomes non-degraded, and this fact has been
recorded in the metadata.
As component devices are added to an md array, they appear in the 'md'
directory as new directories named
@ -334,8 +379,9 @@ Each directory contains:
Writing "writemostly" sets the writemostly flag.
Writing "-writemostly" clears the writemostly flag.
Writing "blocked" sets the "blocked" flag.
Writing "-blocked" clear the "blocked" flag and allows writes
Writing "-blocked" clears the "blocked" flag and allows writes
to complete.
Writing "in_sync" sets the in_sync flag.
This file responds to select/poll. Any change to 'faulty'
or 'blocked' causes an event.
@ -372,6 +418,24 @@ Each directory contains:
array. If a value less than the current component_size is
written, it will be rejected.
recovery_start
When the device is not 'in_sync', this records the number of
sectors from the start of the device which are known to be
correct. This is normally zero, but during a recovery
operation is will steadily increase, and if the recovery is
interrupted, restoring this value can cause recovery to
avoid repeating the earlier blocks. With v1.x metadata, this
value is saved and restored automatically.
This can be set whenever the device is not an active member of
the array, either before the array is activated, or before
the 'slot' is set.
Setting this to 'none' is equivalent to setting 'in_sync'.
Setting to any other value also clears the 'in_sync' flag.
An active md device will also contain and entry for each active device
in the array. These are named

11
Documentation/memory-hotplug.txt
View File

@ -160,12 +160,15 @@ Under each section, you can see 4 files.
NOTE:
These directories/files appear after physical memory hotplug phase.
If CONFIG_NUMA is enabled the
/sys/devices/system/memory/memoryXXX memory section
directories can also be accessed via symbolic links located in
the /sys/devices/system/node/node* directories. For example:
If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed
via symbolic links located in the /sys/devices/system/node/node* directories.
For example:
/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
A backlink will also be created:
/sys/devices/system/memory/memory9/node0 -> ../../node/node0
--------------------------------
4. Physical memory hot-add phase
--------------------------------

57
Documentation/misc-devices/ad525x_dpot.txt Normal file
View File

@ -0,0 +1,57 @@
---------------------------------
AD525x Digital Potentiometers
---------------------------------
The ad525x_dpot driver exports a simple sysfs interface. This allows you to
work with the immediate resistance settings as well as update the saved startup
settings. Access to the factory programmed tolerance is also provided, but
interpretation of this settings is required by the end application according to
the specific part in use.
---------
Files
---------
Each dpot device will have a set of eeprom, rdac, and tolerance files. How
many depends on the actual part you have, as will the range of allowed values.
The eeprom files are used to program the startup value of the device.
The rdac files are used to program the immediate value of the device.
The tolerance files are the read-only factory programmed tolerance settings
and may vary greatly on a part-by-part basis. For exact interpretation of
this field, please consult the datasheet for your part. This is presented
as a hex file for easier parsing.
-----------
Example
-----------
Locate the device in your sysfs tree. This is probably easiest by going into
the common i2c directory and locating the device by the i2c slave address.
# ls /sys/bus/i2c/devices/
0-0022 0-0027 0-002f
So assuming the device in question is on the first i2c bus and has the slave
address of 0x2f, we descend (unrelated sysfs entries have been trimmed).
# ls /sys/bus/i2c/devices/0-002f/
eeprom0 rdac0 tolerance0
You can use simple reads/writes to access these files:
# cd /sys/bus/i2c/devices/0-002f/
# cat eeprom0
0
# echo 10 > eeprom0
# cat eeprom0
10
# cat rdac0
5
# echo 3 > rdac0
# cat rdac0
3

26
Documentation/nommu-mmap.txt
View File

@ -119,6 +119,32 @@ FURTHER NOTES ON NO-MMU MMAP
granule but will only discard the excess if appropriately configured as
this has an effect on fragmentation.
(*) The memory allocated by a request for an anonymous mapping will normally
be cleared by the kernel before being returned in accordance with the
Linux man pages (ver 2.22 or later).
In the MMU case this can be achieved with reasonable performance as
regions are backed by virtual pages, with the contents only being mapped
to cleared physical pages when a write happens on that specific page
(prior to which, the pages are effectively mapped to the global zero page
from which reads can take place). This spreads out the time it takes to
initialize the contents of a page - depending on the write-usage of the
mapping.
In the no-MMU case, however, anonymous mappings are backed by physical
pages, and the entire map is cleared at allocation time. This can cause
significant delays during a userspace malloc() as the C library does an
anonymous mapping and the kernel then does a memset for the entire map.
However, for memory that isn't required to be precleared - such as that
returned by malloc() - mmap() can take a MAP_UNINITIALIZED flag to
indicate to the kernel that it shouldn't bother clearing the memory before
returning it. Note that CONFIG_MMAP_ALLOW_UNINITIALIZED must be enabled
to permit this, otherwise the flag will be ignored.
uClibc uses this to speed up malloc(), and the ELF-FDPIC binfmt uses this
to allocate the brk and stack region.
(*) A list of all the private copy and anonymous mappings on the system is
visible through /proc/maps in no-MMU mode.

211
Documentation/power/runtime_pm.txt
View File

@ -42,80 +42,81 @@ struct dev_pm_ops {
...
};
The ->runtime_suspend() callback is executed by the PM core for the bus type of
the device being suspended. The bus type's callback is then _entirely_
_responsible_ for handling the device as appropriate, which may, but need not
include executing the device driver's own ->runtime_suspend() callback (from the
PM core's point of view it is not necessary to implement a ->runtime_suspend()
callback in a device driver as long as the bus type's ->runtime_suspend() knows
what to do to handle the device).
The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks are
executed by the PM core for either the bus type, or device type (if the bus
type's callback is not defined), or device class (if the bus type's and device
type's callbacks are not defined) of given device. The bus type, device type
and device class callbacks are referred to as subsystem-level callbacks in what
follows.
* Once the bus type's ->runtime_suspend() callback has completed successfully
The subsystem-level suspend callback is _entirely_ _responsible_ for handling
the suspend of the device as appropriate, which may, but need not include
executing the device driver's own ->runtime_suspend() callback (from the
PM core's point of view it is not necessary to implement a ->runtime_suspend()
callback in a device driver as long as the subsystem-level suspend callback
knows what to do to handle the device).
* Once the subsystem-level suspend callback has completed successfully
for given device, the PM core regards the device as suspended, which need
not mean that the device has been put into a low power state. It is
supposed to mean, however, that the device will not process data and will
not communicate with the CPU(s) and RAM until its bus type's
->runtime_resume() callback is executed for it. The run-time PM status of
a device after successful execution of its bus type's ->runtime_suspend()
callback is 'suspended'.
not communicate with the CPU(s) and RAM until the subsystem-level resume
callback is executed for it. The run-time PM status of a device after
successful execution of the subsystem-level suspend callback is 'suspended'.
* If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN,
the device's run-time PM status is supposed to be 'active', which means that
the device _must_ be fully operational afterwards.
* If the subsystem-level suspend callback returns -EBUSY or -EAGAIN,
the device's run-time PM status is 'active', which means that the device
_must_ be fully operational afterwards.
* If the bus type's ->runtime_suspend() callback returns an error code
different from -EBUSY or -EAGAIN, the PM core regards this as a fatal
error and will refuse to run the helper functions described in Section 4
for the device, until the status of it is directly set either to 'active'
or to 'suspended' (the PM core provides special helper functions for this
purpose).
* If the subsystem-level suspend callback returns an error code different
from -EBUSY or -EAGAIN, the PM core regards this as a fatal error and will
refuse to run the helper functions described in Section 4 for the device,
until the status of it is directly set either to 'active', or to 'suspended'
(the PM core provides special helper functions for this purpose).
In particular, if the driver requires remote wakeup capability for proper
functioning and device_run_wake() returns 'false' for the device, then
->runtime_suspend() should return -EBUSY. On the other hand, if
device_run_wake() returns 'true' for the device and the device is put
into a low power state during the execution of its bus type's
->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism
allowing the device to request a change of its power state, such as PCI PME)
will be enabled for the device. Generally, remote wake-up should be enabled
for all input devices put into a low power state at run time.
In particular, if the driver requires remote wake-up capability (i.e. hardware
mechanism allowing the device to request a change of its power state, such as
PCI PME) for proper functioning and device_run_wake() returns 'false' for the
device, then ->runtime_suspend() should return -EBUSY. On the other hand, if
device_run_wake() returns 'true' for the device and the device is put into a low
power state during the execution of the subsystem-level suspend callback, it is
expected that remote wake-up will be enabled for the device. Generally, remote
wake-up should be enabled for all input devices put into a low power state at
run time.
The ->runtime_resume() callback is executed by the PM core for the bus type of
the device being woken up. The bus type's callback is then _entirely_
_responsible_ for handling the device as appropriate, which may, but need not
include executing the device driver's own ->runtime_resume() callback (from the
PM core's point of view it is not necessary to implement a ->runtime_resume()
callback in a device driver as long as the bus type's ->runtime_resume() knows
what to do to handle the device).
The subsystem-level resume callback is _entirely_ _responsible_ for handling the
resume of the device as appropriate, which may, but need not include executing
the device driver's own ->runtime_resume() callback (from the PM core's point of
view it is not necessary to implement a ->runtime_resume() callback in a device
driver as long as the subsystem-level resume callback knows what to do to handle
the device).
* Once the bus type's ->runtime_resume() callback has completed successfully,
the PM core regards the device as fully operational, which means that the
device _must_ be able to complete I/O operations as needed. The run-time
PM status of the device is then 'active'.
* Once the subsystem-level resume callback has completed successfully, the PM
core regards the device as fully operational, which means that the device
_must_ be able to complete I/O operations as needed. The run-time PM status
of the device is then 'active'.
* If the bus type's ->runtime_resume() callback returns an error code, the PM
core regards this as a fatal error and will refuse to run the helper
functions described in Section 4 for the device, until its status is
directly set either to 'active' or to 'suspended' (the PM core provides
special helper functions for this purpose).
* If the subsystem-level resume callback returns an error code, the PM core
regards this as a fatal error and will refuse to run the helper functions
described in Section 4 for the device, until its status is directly set
either to 'active' or to 'suspended' (the PM core provides special helper
functions for this purpose).
The ->runtime_idle() callback is executed by the PM core for the bus type of
given device whenever the device appears to be idle, which is indicated to the
PM core by two counters, the device's usage counter and the counter of 'active'
children of the device.
The subsystem-level idle callback is executed by the PM core whenever the device
appears to be idle, which is indicated to the PM core by two counters, the
device's usage counter and the counter of 'active' children of the device.
* If any of these counters is decreased using a helper function provided by
the PM core and it turns out to be equal to zero, the other counter is
checked. If that counter also is equal to zero, the PM core executes the
device bus type's ->runtime_idle() callback (with the device as an
argument).
subsystem-level idle callback with the device as an argument.
The action performed by a bus type's ->runtime_idle() callback is totally
dependent on the bus type in question, but the expected and recommended action
is to check if the device can be suspended (i.e. if all of the conditions
necessary for suspending the device are satisfied) and to queue up a suspend
request for the device in that case. The value returned by this callback is
ignored by the PM core.
The action performed by a subsystem-level idle callback is totally dependent on
the subsystem in question, but the expected and recommended action is to check
if the device can be suspended (i.e. if all of the conditions necessary for
suspending the device are satisfied) and to queue up a suspend request for the
device in that case. The value returned by this callback is ignored by the PM
core.
The helper functions provided by the PM core, described in Section 4, guarantee
that the following constraints are met with respect to the bus type's run-time
@ -238,41 +239,41 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
removing the device from device hierarchy
int pm_runtime_idle(struct device *dev);
- execute ->runtime_idle() for the device's bus type; returns 0 on success
or error code on failure, where -EINPROGRESS means that ->runtime_idle()
is already being executed
- execute the subsystem-level idle callback for the device; returns 0 on
success or error code on failure, where -EINPROGRESS means that
->runtime_idle() is already being executed
int pm_runtime_suspend(struct device *dev);
- execute ->runtime_suspend() for the device's bus type; returns 0 on
- execute the subsystem-level suspend callback for the device; returns 0 on
success, 1 if the device's run-time PM status was already 'suspended', or
error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
to suspend the device again in future
int pm_runtime_resume(struct device *dev);
- execute ->runtime_resume() for the device's bus type; returns 0 on
- execute the subsystem-leve resume callback for the device; returns 0 on
success, 1 if the device's run-time PM status was already 'active' or
error code on failure, where -EAGAIN means it may be safe to attempt to
resume the device again in future, but 'power.runtime_error' should be
checked additionally
int pm_request_idle(struct device *dev);
- submit a request to execute ->runtime_idle() for the device's bus type
(the request is represented by a work item in pm_wq); returns 0 on success
or error code if the request has not been queued up
- submit a request to execute the subsystem-level idle callback for the
device (the request is represented by a work item in pm_wq); returns 0 on
success or error code if the request has not been queued up
int pm_schedule_suspend(struct device *dev, unsigned int delay);
- schedule the execution of ->runtime_suspend() for the device's bus type
in future, where 'delay' is the time to wait before queuing up a suspend
work item in pm_wq, in milliseconds (if 'delay' is zero, the work item is
queued up immediately); returns 0 on success, 1 if the device's PM
- schedule the execution of the subsystem-level suspend callback for the
device in future, where 'delay' is the time to wait before queuing up a
suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work
item is queued up immediately); returns 0 on success, 1 if the device's PM
run-time status was already 'suspended', or error code if the request
hasn't been scheduled (or queued up if 'delay' is 0); if the execution of
->runtime_suspend() is already scheduled and not yet expired, the new
value of 'delay' will be used as the time to wait
int pm_request_resume(struct device *dev);
- submit a request to execute ->runtime_resume() for the device's bus type
(the request is represented by a work item in pm_wq); returns 0 on
- submit a request to execute the subsystem-level resume callback for the
device (the request is represented by a work item in pm_wq); returns 0 on
success, 1 if the device's run-time PM status was already 'active', or
error code if the request hasn't been queued up
@ -303,12 +304,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
run-time PM callbacks described in Section 2
int pm_runtime_disable(struct device *dev);
- prevent the run-time PM helper functions from running the device bus
type's run-time PM callbacks, make sure that all of the pending run-time
PM operations on the device are either completed or canceled; returns
1 if there was a resume request pending and it was necessary to execute
->runtime_resume() for the device's bus type to satisfy that request,
otherwise 0 is returned
- prevent the run-time PM helper functions from running subsystem-level
run-time PM callbacks for the device, make sure that all of the pending
run-time PM operations on the device are either completed or canceled;
returns 1 if there was a resume request pending and it was necessary to
execute the subsystem-level resume callback for the device to satisfy that
request, otherwise 0 is returned
void pm_suspend_ignore_children(struct device *dev, bool enable);
- set/unset the power.ignore_children flag of the device
@ -378,5 +379,55 @@ pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
they will fail returning -EAGAIN, because the device's usage counter is
incremented by the core before executing ->probe() and ->remove(). Still, it
may be desirable to suspend the device as soon as ->probe() or ->remove() has
finished, so the PM core uses pm_runtime_idle_sync() to invoke the device bus
type's ->runtime_idle() callback at that time.
finished, so the PM core uses pm_runtime_idle_sync() to invoke the
subsystem-level idle callback for the device at that time.
6. Run-time PM and System Sleep
Run-time PM and system sleep (i.e., system suspend and hibernation, also known
as suspend-to-RAM and suspend-to-disk) interact with each other in a couple of
ways. If a device is active when a system sleep starts, everything is
straightforward. But what should happen if the device is already suspended?
The device may have different wake-up settings for run-time PM and system sleep.
For example, remote wake-up may be enabled for run-time suspend but disallowed
for system sleep (device_may_wakeup(dev) returns 'false'). When this happens,
the subsystem-level system suspend callback is responsible for changing the
device's wake-up setting (it may leave that to the device driver's system
suspend routine). It may be necessary to resume the device and suspend it again
in order to do so. The same is true if the driver uses different power levels
or other settings for run-time suspend and system sleep.
During system resume, devices generally should be brought back to full power,
even if they were suspended before the system sleep began. There are several
reasons for this, including:
* The device might need to switch power levels, wake-up settings, etc.
* Remote wake-up events might have been lost by the firmware.
* The device's children may need the device to be at full power in order
to resume themselves.
* The driver's idea of the device state may not agree with the device's
physical state. This can happen during resume from hibernation.
* The device might need to be reset.
* Even though the device was suspended, if its usage counter was > 0 then most
likely it would need a run-time resume in the near future anyway.
* Always going back to full power is simplest.
If the device was suspended before the sleep began, then its run-time PM status
will have to be updated to reflect the actual post-system sleep status. The way
to do this is:
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
The PM core always increments the run-time usage counter before calling the
->prepare() callback and decrements it after calling the ->complete() callback.
Hence disabling run-time PM temporarily like this will not cause any run-time
suspend callbacks to be lost.

93
Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt Normal file
View File

@ -0,0 +1,93 @@
PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
Device nodes needed for operation of the ppc440spe-adma driver
are specified hereby. These are I2O/DMA, DMA and XOR nodes
for DMA engines and Memory Queue Module node. The latter is used
by ADMA driver for configuration of RAID-6 H/W capabilities of
the PPC440SPe. In addition to the nodes and properties described
below, the ranges property of PLB node must specify ranges for
DMA devices.
i) The I2O node
Required properties:
- compatible : "ibm,i2o-440spe";
- reg : <registers mapping>
- dcr-reg : <DCR registers range>
Example:
I2O: i2o@400100000 {
compatible = "ibm,i2o-440spe";
reg = <0x00000004 0x00100000 0x100>;
dcr-reg = <0x060 0x020>;
};
ii) The DMA node
Required properties:
- compatible : "ibm,dma-440spe";
- cell-index : 1 cell, hardware index of the DMA engine
(typically 0x0 and 0x1 for DMA0 and DMA1)
- reg : <registers mapping>
- dcr-reg : <DCR registers range>
- interrupts : <interrupt mapping for DMA0/1 interrupts sources:
2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
and DMA Error IRQ (on UIC1). The latter is common
for both DMA engines>.
- interrupt-parent : needed for interrupt mapping
Example:
DMA0: dma0@400100100 {
compatible = "ibm,dma-440spe";
cell-index = <0>;
reg = <0x00000004 0x00100100 0x100>;
dcr-reg = <0x060 0x020>;
interrupt-parent = <&DMA0>;
interrupts = <0 1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <
0 &UIC0 0x14 4
1 &UIC1 0x16 4>;
};
iii) XOR Accelerator node
Required properties:
- compatible : "amcc,xor-accelerator";
- reg : <registers mapping>
- interrupts : <interrupt mapping for XOR interrupt source>
- interrupt-parent : for interrupt mapping
Example:
xor-accel@400200000 {
compatible = "amcc,xor-accelerator";
reg = <0x00000004 0x00200000 0x400>;
interrupt-parent = <&UIC1>;
interrupts = <0x1f 4>;
};
iv) Memory Queue Module node
Required properties:
- compatible : "ibm,mq-440spe";
- dcr-reg : <DCR registers range>
Example:
MQ0: mq {
compatible = "ibm,mq-440spe";
dcr-reg = <0x040 0x020>;
};

42
Documentation/powerpc/dts-bindings/fsl/mpic.txt Normal file
View File

@ -0,0 +1,42 @@
* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores
The OpenPIC specification does not specify which interrupt source has to
become which interrupt number. This is up to the software implementation
of the interrupt controller. The only requirement is that every
interrupt source has to have an unique interrupt number / vector number.
To accomplish this the current implementation assigns the number zero to
the first source, the number one to the second source and so on until
all interrupt sources have their unique number.
Usually the assigned vector number equals the interrupt number mentioned
in the documentation for a given core / CPU. This is however not true
for the e500 cores (MPC85XX CPUs) where the documentation distinguishes
between internal and external interrupt sources and starts counting at
zero for both of them.
So what to write for external interrupt source X or internal interrupt
source Y into the device tree? Here is an example:
The memory map for the interrupt controller in the MPC8544[0] shows,
that the first interrupt source starts at 0x5_0000 (PIC Register Address
Map-Interrupt Source Configuration Registers). This source becomes the
number zero therefore:
External interrupt 0 = interrupt number 0
External interrupt 1 = interrupt number 1
External interrupt 2 = interrupt number 2
...
Every interrupt number allocates 0x20 bytes register space. So to get
its number it is sufficient to shift the lower 16bits to right by five.
So for the external interrupt 10 we have:
0x0140 >> 5 = 10
After the external sources, the internal sources follow. The in core I2C
controller on the MPC8544 for instance has the internal source number
27. Oo obtain its interrupt number we take the lower 16bits of its memory
address (0x5_0560) and shift it right:
0x0560 >> 5 = 43
Therefore the I2C device node for the MPC8544 CPU has to have the
interrupt number 43 specified in the device tree.
[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual
MPC8544ERM Rev. 1 10/2007

109
Documentation/powerpc/dts-bindings/nintendo/gamecube.txt Normal file
View File

@ -0,0 +1,109 @@
Nintendo GameCube device tree
=============================
1) The "flipper" node
This node represents the multi-function "Flipper" chip, which packages
many of the devices found in the Nintendo GameCube.
Required properties:
- compatible : Should be "nintendo,flipper"
1.a) The Video Interface (VI) node
Represents the interface between the graphics processor and a external
video encoder.
Required properties:
- compatible : should be "nintendo,flipper-vi"
- reg : should contain the VI registers location and length
- interrupts : should contain the VI interrupt
1.b) The Processor Interface (PI) node
Represents the data and control interface between the main processor
and graphics and audio processor.
Required properties:
- compatible : should be "nintendo,flipper-pi"
- reg : should contain the PI registers location and length
1.b.i) The "Flipper" interrupt controller node
Represents the interrupt controller within the "Flipper" chip.
The node for the "Flipper" interrupt controller must be placed under
the PI node.
Required properties:
- compatible : should be "nintendo,flipper-pic"
1.c) The Digital Signal Procesor (DSP) node
Represents the digital signal processor interface, designed to offload
audio related tasks.
Required properties:
- compatible : should be "nintendo,flipper-dsp"
- reg : should contain the DSP registers location and length
- interrupts : should contain the DSP interrupt
1.c.i) The Auxiliary RAM (ARAM) node
Represents the non cpu-addressable ram designed mainly to store audio
related information.
The ARAM node must be placed under the DSP node.
Required properties:
- compatible : should be "nintendo,flipper-aram"
- reg : should contain the ARAM start (zero-based) and length
1.d) The Disk Interface (DI) node
Represents the interface used to communicate with mass storage devices.
Required properties:
- compatible : should be "nintendo,flipper-di"
- reg : should contain the DI registers location and length
- interrupts : should contain the DI interrupt
1.e) The Audio Interface (AI) node
Represents the interface to the external 16-bit stereo digital-to-analog
converter.
Required properties:
- compatible : should be "nintendo,flipper-ai"
- reg : should contain the AI registers location and length
- interrupts : should contain the AI interrupt
1.f) The Serial Interface (SI) node
Represents the interface to the four single bit serial interfaces.
The SI is a proprietary serial interface used normally to control gamepads.
It's NOT a RS232-type interface.
Required properties:
- compatible : should be "nintendo,flipper-si"
- reg : should contain the SI registers location and length
- interrupts : should contain the SI interrupt
1.g) The External Interface (EXI) node
Represents the multi-channel SPI-like interface.
Required properties:
- compatible : should be "nintendo,flipper-exi"
- reg : should contain the EXI registers location and length
- interrupts : should contain the EXI interrupt

184
Documentation/powerpc/dts-bindings/nintendo/wii.txt Normal file
View File

@ -0,0 +1,184 @@
Nintendo Wii device tree
========================
0) The root node
This node represents the Nintendo Wii video game console.
Required properties:
- model : Should be "nintendo,wii"
- compatible : Should be "nintendo,wii"
1) The "hollywood" node
This node represents the multi-function "Hollywood" chip, which packages
many of the devices found in the Nintendo Wii.
Required properties:
- compatible : Should be "nintendo,hollywood"
1.a) The Video Interface (VI) node
Represents the interface between the graphics processor and a external
video encoder.
Required properties:
- compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi"
- reg : should contain the VI registers location and length
- interrupts : should contain the VI interrupt
1.b) The Processor Interface (PI) node
Represents the data and control interface between the main processor
and graphics and audio processor.
Required properties:
- compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi"
- reg : should contain the PI registers location and length
1.b.i) The "Flipper" interrupt controller node
Represents the "Flipper" interrupt controller within the "Hollywood" chip.
The node for the "Flipper" interrupt controller must be placed under
the PI node.
Required properties:
- #interrupt-cells : <1>
- compatible : should be "nintendo,flipper-pic"
- interrupt-controller
1.c) The Digital Signal Procesor (DSP) node
Represents the digital signal processor interface, designed to offload
audio related tasks.
Required properties:
- compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp"
- reg : should contain the DSP registers location and length
- interrupts : should contain the DSP interrupt
1.d) The Serial Interface (SI) node
Represents the interface to the four single bit serial interfaces.
The SI is a proprietary serial interface used normally to control gamepads.
It's NOT a RS232-type interface.
Required properties:
- compatible : should be "nintendo,hollywood-si","nintendo,flipper-si"
- reg : should contain the SI registers location and length
- interrupts : should contain the SI interrupt
1.e) The Audio Interface (AI) node
Represents the interface to the external 16-bit stereo digital-to-analog
converter.
Required properties:
- compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai"
- reg : should contain the AI registers location and length
- interrupts : should contain the AI interrupt
1.f) The External Interface (EXI) node
Represents the multi-channel SPI-like interface.
Required properties:
- compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi"
- reg : should contain the EXI registers location and length
- interrupts : should contain the EXI interrupt
1.g) The Open Host Controller Interface (OHCI) nodes
Represent the USB 1.x Open Host Controller Interfaces.
Required properties:
- compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci"
- reg : should contain the OHCI registers location and length
- interrupts : should contain the OHCI interrupt
1.h) The Enhanced Host Controller Interface (EHCI) node
Represents the USB 2.0 Enhanced Host Controller Interface.
Required properties:
- compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci"
- reg : should contain the EHCI registers location and length
- interrupts : should contain the EHCI interrupt
1.i) The Secure Digital Host Controller Interface (SDHCI) nodes
Represent the Secure Digital Host Controller Interfaces.
Required properties:
- compatible : should be "nintendo,hollywood-sdhci","sdhci"
- reg : should contain the SDHCI registers location and length
- interrupts : should contain the SDHCI interrupt
1.j) The Inter-Processsor Communication (IPC) node
Represent the Inter-Processor Communication interface. This interface
enables communications between the Broadway and the Starlet processors.
- compatible : should be "nintendo,hollywood-ipc"
- reg : should contain the IPC registers location and length
- interrupts : should contain the IPC interrupt
1.k) The "Hollywood" interrupt controller node
Represents the "Hollywood" interrupt controller within the
"Hollywood" chip.
Required properties:
- #interrupt-cells : <1>
- compatible : should be "nintendo,hollywood-pic"
- reg : should contain the controller registers location and length
- interrupt-controller
- interrupts : should contain the cascade interrupt of the "flipper" pic
- interrupt-parent: should contain the phandle of the "flipper" pic
1.l) The General Purpose I/O (GPIO) controller node
Represents the dual access 32 GPIO controller interface.
Required properties:
- #gpio-cells : <2>
- compatible : should be "nintendo,hollywood-gpio"
- reg : should contain the IPC registers location and length
- gpio-controller
1.m) The control node
Represents the control interface used to setup several miscellaneous
settings of the "Hollywood" chip like boot memory mappings, resets,
disk interface mode, etc.
Required properties:
- compatible : should be "nintendo,hollywood-control"
- reg : should contain the control registers location and length
1.n) The Disk Interface (DI) node
Represents the interface used to communicate with mass storage devices.
Required properties:
- compatible : should be "nintendo,hollywood-di"
- reg : should contain the DI registers location and length
- interrupts : should contain the DI interrupt

1
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -403,4 +403,5 @@ STAC9872
Cirrus Logic CS4206/4207
========================
mbp55 MacBook Pro 5,5
imac27 IMac 27 Inch
auto BIOS setup (default)

184
Documentation/spinlocks.txt
View File

@ -1,73 +1,8 @@
SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED defeat lockdep state tracking and
are hence deprecated.
Lesson 1: Spin locks
Please use DEFINE_SPINLOCK()/DEFINE_RWLOCK() or
__SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static
initialization.
Most of the time, you can simply turn:
static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
into:
static DEFINE_SPINLOCK(xxx_lock);
Static structure member variables go from:
struct foo bar {
.lock = SPIN_LOCK_UNLOCKED;
};
to:
struct foo bar {
.lock = __SPIN_LOCK_UNLOCKED(bar.lock);
};
Declaration of static rw_locks undergo a similar transformation.
Dynamic initialization, when necessary, may be performed as
demonstrated below.
spinlock_t xxx_lock;
rwlock_t xxx_rw_lock;
static int __init xxx_init(void)
{
spin_lock_init(&xxx_lock);
rwlock_init(&xxx_rw_lock);
...
}
module_init(xxx_init);
The following discussion is still valid, however, with the dynamic
initialization of spinlocks or with DEFINE_SPINLOCK, etc., used
instead of SPIN_LOCK_UNLOCKED.
-----------------------
On Fri, 2 Jan 1998, Doug Ledford wrote:
>
> I'm working on making the aic7xxx driver more SMP friendly (as well as
> importing the latest FreeBSD sequencer code to have 7895 support) and wanted
> to get some info from you. The goal here is to make the various routines
> SMP safe as well as UP safe during interrupts and other manipulating
> routines. So far, I've added a spin_lock variable to things like my queue
> structs. Now, from what I recall, there are some spin lock functions I can
> use to lock these spin locks from other use as opposed to a (nasty)
> save_flags(); cli(); stuff; restore_flags(); construct. Where do I find
> these routines and go about making use of them? Do they only lock on a
> per-processor basis or can they also lock say an interrupt routine from
> mucking with a queue if the queue routine was manipulating it when the
> interrupt occurred, or should I still use a cli(); based construct on that
> one?
See <asm/spinlock.h>. The basic version is:
spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
The most basic primitive for locking is spinlock.
static DEFINE_SPINLOCK(xxx_lock);
unsigned long flags;
@ -75,13 +10,11 @@ See <asm/spinlock.h>. The basic version is:
... critical section here ..
spin_unlock_irqrestore(&xxx_lock, flags);
and the above is always safe. It will disable interrupts _locally_, but the
The above is always safe. It will disable interrupts _locally_, but the
spinlock itself will guarantee the global lock, so it will guarantee that
there is only one thread-of-control within the region(s) protected by that
lock.
Note that it works well even under UP - the above sequence under UP
essentially is just the same as doing a
lock. This works well even under UP. The above sequence under UP
essentially is just the same as doing
unsigned long flags;
@ -91,15 +24,13 @@ essentially is just the same as doing a
so the code does _not_ need to worry about UP vs SMP issues: the spinlocks
work correctly under both (and spinlocks are actually more efficient on
architectures that allow doing the "save_flags + cli" in one go because I
don't export that interface normally).
architectures that allow doing the "save_flags + cli" in one operation).
NOTE NOTE NOTE! The reason the spinlock is so much faster than a global
interrupt lock under SMP is exactly because it disables interrupts only on
the local CPU. The spin-lock is safe only when you _also_ use the lock
itself to do locking across CPU's, which implies that EVERYTHING that
touches a shared variable has to agree about the spinlock they want to
use.
NOTE! Implications of spin_locks for memory are further described in:
Documentation/memory-barriers.txt
(5) LOCK operations.
(6) UNLOCK operations.
The above is usually pretty simple (you usually need and want only one
spinlock for most things - using more than one spinlock can make things a
@ -120,20 +51,24 @@ and another sequence that does
then they are NOT mutually exclusive, and the critical regions can happen
at the same time on two different CPU's. That's fine per se, but the
critical regions had better be critical for different things (ie they
can't stomp on each other).
can't stomp on each other).
The above is a problem mainly if you end up mixing code - for example the
routines in ll_rw_block() tend to use cli/sti to protect the atomicity of
their actions, and if a driver uses spinlocks instead then you should
think about issues like the above..
think about issues like the above.
This is really the only really hard part about spinlocks: once you start
using spinlocks they tend to expand to areas you might not have noticed
before, because you have to make sure the spinlocks correctly protect the
shared data structures _everywhere_ they are used. The spinlocks are most
easily added to places that are completely independent of other code (ie
internal driver data structures that nobody else ever touches, for
example).
easily added to places that are completely independent of other code (for
example, internal driver data structures that nobody else ever touches).
NOTE! The spin-lock is safe only when you _also_ use the lock itself
to do locking across CPU's, which implies that EVERYTHING that
touches a shared variable has to agree about the spinlock they want
to use.
----
@ -141,14 +76,18 @@ Lesson 2: reader-writer spinlocks.
If your data accesses have a very natural pattern where you usually tend
to mostly read from the shared variables, the reader-writer locks
(rw_lock) versions of the spinlocks are often nicer. They allow multiple
(rw_lock) versions of the spinlocks are sometimes useful. They allow multiple
readers to be in the same critical region at once, but if somebody wants
to change the variables it has to get an exclusive write lock. The
routines look the same as above:
to change the variables it has to get an exclusive write lock.
NOTE! reader-writer locks require more atomic memory operations than
simple spinlocks. Unless the reader critical section is long, you
are better off just using spinlocks.
The routines look the same as above:
rwlock_t xxx_lock = RW_LOCK_UNLOCKED;
unsigned long flags;
read_lock_irqsave(&xxx_lock, flags);
@ -159,18 +98,21 @@ routines look the same as above:
.. read and write exclusive access to the info ...
write_unlock_irqrestore(&xxx_lock, flags);
The above kind of lock is useful for complex data structures like linked
lists etc, especially when you know that most of the work is to just
traverse the list searching for entries without changing the list itself,
for example. Then you can use the read lock for that kind of list
traversal, which allows many concurrent readers. Anything that _changes_
the list will have to get the write lock.
The above kind of lock may be useful for complex data structures like
linked lists, especially searching for entries without changing the list
itself. The read lock allows many concurrent readers. Anything that
_changes_ the list will have to get the write lock.
Note: you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
NOTE! RCU is better for list traversal, but requires careful
attention to design detail (see Documentation/RCU/listRCU.txt).
Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
time need to do any changes (even if you don't do it every time), you have
to get the write-lock at the very beginning. I could fairly easily add a
primitive to create a "upgradeable" read-lock, but it hasn't been an issue
yet. Tell me if you'd want one.
to get the write-lock at the very beginning.
NOTE! We are working hard to remove reader-writer spinlocks in most
cases, so please don't add a new one without consensus. (Instead, see
Documentation/RCU/rcu.txt for complete information.)
----
@ -233,4 +175,46 @@ indeed), while write-locks need to protect themselves against interrupts.
Linus
----
Reference information:
For dynamic initialization, use spin_lock_init() or rwlock_init() as
appropriate:
spinlock_t xxx_lock;
rwlock_t xxx_rw_lock;
static int __init xxx_init(void)
{
spin_lock_init(&xxx_lock);
rwlock_init(&xxx_rw_lock);
...
}
module_init(xxx_init);
For static initialization, use DEFINE_SPINLOCK() / DEFINE_RWLOCK() or
__SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED() as appropriate.
SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED are deprecated. These interfere
with lockdep state tracking.
Most of the time, you can simply turn:
static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
into:
static DEFINE_SPINLOCK(xxx_lock);
Static structure member variables go from:
struct foo bar {
.lock = SPIN_LOCK_UNLOCKED;
};
to:
struct foo bar {
.lock = __SPIN_LOCK_UNLOCKED(bar.lock);
};
Declaration of static rw_locks undergo a similar transformation.

24
Documentation/stable_kernel_rules.txt
View File

@ -26,13 +26,33 @@ Procedure for submitting patches to the -stable tree:
- Send the patch, after verifying that it follows the above rules, to
stable@kernel.org.
- To have the patch automatically included in the stable tree, add the
the tag
Cc: stable@kernel.org
in the sign-off area. Once the patch is merged it will be applied to
the stable tree without anything else needing to be done by the author
or subsystem maintainer.
- If the patch requires other patches as prerequisites which can be
cherry-picked than this can be specified in the following format in
the sign-off area:
Cc: <stable@kernel.org> # .32.x: a1f84a3: sched: Check for idle
Cc: <stable@kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle
Cc: <stable@kernel.org> # .32.x: fd21073: sched: Fix affinity logic
Cc: <stable@kernel.org> # .32.x
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The tag sequence has the meaning of:
git cherry-pick a1f84a3
git cherry-pick 1b9508f
git cherry-pick fd21073
git cherry-pick <this commit>
- The sender will receive an ACK when the patch has been accepted into the
queue, or a NAK if the patch is rejected. This response might take a few
days, according to the developer's schedules.
- If accepted, the patch will be added to the -stable queue, for review by
other developers and by the relevant subsystem maintainer.
- If the stable@kernel.org address is added to a patch, when it goes into
Linus's tree it will automatically be emailed to the stable team.
- Security patches should not be sent to this alias, but instead to the
documented security@kernel.org address.

31
Documentation/sysctl/kernel.txt
View File

@ -19,6 +19,8 @@ Currently, these files might (depending on your configuration)
show up in /proc/sys/kernel:
- acpi_video_flags
- acct
- bootloader_type [ X86 only ]
- bootloader_version [ X86 only ]
- callhome [ S390 only ]
- auto_msgmni
- core_pattern
@ -93,6 +95,35 @@ valid for 30 seconds.
==============================================================
bootloader_type:
x86 bootloader identification
This gives the bootloader type number as indicated by the bootloader,
shifted left by 4, and OR'd with the low four bits of the bootloader
version. The reason for this encoding is that this used to match the
type_of_loader field in the kernel header; the encoding is kept for
backwards compatibility. That is, if the full bootloader type number
is 0x15 and the full version number is 0x234, this file will contain
the value 340 = 0x154.
See the type_of_loader and ext_loader_type fields in
Documentation/x86/boot.txt for additional information.
==============================================================
bootloader_version:
x86 bootloader version
The complete bootloader version number. In the example above, this
file will contain the value 564 = 0x234.
See the type_of_loader and ext_loader_ver fields in
Documentation/x86/boot.txt for additional information.
==============================================================
callhome:
Controls the kernel's callhome behavior in case of a kernel panic.

1
Documentation/thermal/sysfs-api.txt
View File

@ -206,6 +206,7 @@ passive
passive trip point for the zone. Activation is done by polling with
an interval of 1 second.
Unit: millidegrees Celsius
Valid values: 0 (disabled) or greater than 1000
RW, Optional
*****************************

14
Documentation/trace/events-kmem.txt
View File

@ -1,7 +1,7 @@
Subsystem Trace Points: kmem
The tracing system kmem captures events related to object and page allocation
within the kernel. Broadly speaking there are four major subheadings.
The kmem tracing system captures events related to object and page allocation
within the kernel. Broadly speaking there are five major subheadings.
o Slab allocation of small objects of unknown type (kmalloc)
o Slab allocation of small objects of known type
@ -9,7 +9,7 @@ within the kernel. Broadly speaking there are four major subheadings.
o Per-CPU Allocator Activity
o External Fragmentation
This document will describe what each of the tracepoints are and why they
This document describes what each of the tracepoints is and why they
might be useful.
1. Slab allocation of small objects of unknown type
@ -34,7 +34,7 @@ kmem_cache_free call_site=%lx ptr=%p
These events are similar in usage to the kmalloc-related events except that
it is likely easier to pin the event down to a specific cache. At the time
of writing, no information is available on what slab is being allocated from,
but the call_site can usually be used to extrapolate that information
but the call_site can usually be used to extrapolate that information.
3. Page allocation
==================
@ -80,9 +80,9 @@ event indicating whether it is for a percpu_refill or not.
When the per-CPU list is too full, a number of pages are freed, each one
which triggers a mm_page_pcpu_drain event.
The individual nature of the events are so that pages can be tracked
The individual nature of the events is so that pages can be tracked
between allocation and freeing. A number of drain or refill pages that occur
consecutively imply the zone->lock being taken once. Large amounts of PCP
consecutively imply the zone->lock being taken once. Large amounts of per-CPU
refills and drains could imply an imbalance between CPUs where too much work
is being concentrated in one place. It could also indicate that the per-CPU
lists should be a larger size. Finally, large amounts of refills on one CPU
@ -102,6 +102,6 @@ is important.
Large numbers of this event implies that memory is fragmenting and
high-order allocations will start failing at some time in the future. One
means of reducing the occurange of this event is to increase the size of
means of reducing the occurrence of this event is to increase the size of
min_free_kbytes in increments of 3*pageblock_size*nr_online_nodes where
pageblock_size is usually the size of the default hugepage size.

41
Documentation/usb/power-management.txt
View File

@ -71,12 +71,10 @@ being accessed through sysfs, then it definitely is idle.
Forms of dynamic PM
-------------------
Dynamic suspends can occur in two ways: manual and automatic.
"Manual" means that the user has told the kernel to suspend a device,
whereas "automatic" means that the kernel has decided all by itself to
suspend a device. Automatic suspend is called "autosuspend" for
short. In general, a device won't be autosuspended unless it has been
idle for some minimum period of time, the so-called idle-delay time.
Dynamic suspends occur when the kernel decides to suspend an idle
device. This is called "autosuspend" for short. In general, a device
won't be autosuspended unless it has been idle for some minimum period
of time, the so-called idle-delay time.
Of course, nothing the kernel does on its own initiative should
prevent the computer or its devices from working properly. If a
@ -96,10 +94,11 @@ idle.
We can categorize power management events in two broad classes:
external and internal. External events are those triggered by some
agent outside the USB stack: system suspend/resume (triggered by
userspace), manual dynamic suspend/resume (also triggered by
userspace), and remote wakeup (triggered by the device). Internal
events are those triggered within the USB stack: autosuspend and
autoresume.
userspace), manual dynamic resume (also triggered by userspace), and
remote wakeup (triggered by the device). Internal events are those
triggered within the USB stack: autosuspend and autoresume. Note that
all dynamic suspend events are internal; external agents are not
allowed to issue dynamic suspends.
The user interface for dynamic PM
@ -145,9 +144,9 @@ relevant attribute files are: wakeup, level, and autosuspend.
number of seconds the device should remain idle before
the kernel will autosuspend it (the idle-delay time).
The default is 2. 0 means to autosuspend as soon as
the device becomes idle, and -1 means never to
autosuspend. You can write a number to the file to
change the autosuspend idle-delay time.
the device becomes idle, and negative values mean
never to autosuspend. You can write a number to the
file to change the autosuspend idle-delay time.
Writing "-1" to power/autosuspend and writing "on" to power/level do
essentially the same thing -- they both prevent the device from being
@ -377,9 +376,9 @@ the device hasn't been idle for long enough, a delayed workqueue
routine is automatically set up to carry out the operation when the
autosuspend idle-delay has expired.
Autoresume attempts also can fail. This will happen if power/level is
set to "suspend" or if the device doesn't manage to resume properly.
Unlike autosuspend, there's no delay for an autoresume.
Autoresume attempts also can fail, although failure would mean that
the device is no longer present or operating properly. Unlike
autosuspend, there's no delay for an autoresume.
Other parts of the driver interface
@ -527,13 +526,3 @@ succeed, it may still remain active and thus cause the system to
resume as soon as the system suspend is complete. Or the remote
wakeup may fail and get lost. Which outcome occurs depends on timing
and on the hardware and firmware design.
More interestingly, a device might undergo a manual resume or
autoresume during system suspend. With current kernels this shouldn't
happen, because manual resumes must be initiated by userspace and
autoresumes happen in response to I/O requests, but all user processes
and I/O should be quiescent during a system suspend -- thanks to the
freezer. However there are plans to do away with the freezer, which
would mean these things would become possible. If and when this comes
about, the USB core will carefully arrange matters so that either type
of resume will block until the entire system has resumed.

34
Documentation/video4linux/gspca.txt
View File

@ -12,6 +12,7 @@ m5602 0402:5602 ALi Video Camera Controller
spca501 040a:0002 Kodak DVC-325
spca500 040a:0300 Kodak EZ200
zc3xx 041e:041e Creative WebCam Live!
ov519 041e:4003 Video Blaster WebCam Go Plus
spca500 041e:400a Creative PC-CAM 300
sunplus 041e:400b Creative PC-CAM 600
sunplus 041e:4012 PC-Cam350
@ -168,10 +169,14 @@ sunplus 055f:c650 Mustek MDC5500Z
zc3xx 055f:d003 Mustek WCam300A
zc3xx 055f:d004 Mustek WCam300 AN
conex 0572:0041 Creative Notebook cx11646
ov519 05a9:0511 Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera
ov519 05a9:0518 Creative WebCam
ov519 05a9:0519 OV519 Microphone
ov519 05a9:0530 OmniVision
ov519 05a9:2800 OmniVision SuperCAM
ov519 05a9:4519 Webcam Classic
ov519 05a9:8519 OmniVision
ov519 05a9:a511 D-Link USB Digital Video Camera
ov519 05a9:a518 D-Link DSB-C310 Webcam
sunplus 05da:1018 Digital Dream Enigma 1.3
stk014 05e1:0893 Syntek DV4000
@ -187,7 +192,7 @@ ov534 06f8:3002 Hercules Blog Webcam
ov534 06f8:3003 Hercules Dualpix HD Weblog
sonixj 06f8:3004 Hercules Classic Silver
sonixj 06f8:3008 Hercules Deluxe Optical Glass
pac7311 06f8:3009 Hercules Classic Link
pac7302 06f8:3009 Hercules Classic Link
spca508 0733:0110 ViewQuest VQ110
spca501 0733:0401 Intel Create and Share
spca501 0733:0402 ViewQuest M318B
@ -199,6 +204,7 @@ sunplus 0733:2221 Mercury Digital Pro 3.1p
sunplus 0733:3261 Concord 3045 spca536a
sunplus 0733:3281 Cyberpix S550V
spca506 0734:043b 3DeMon USB Capture aka
ov519 0813:0002 Dual Mode USB Camera Plus
spca500 084d:0003 D-Link DSC-350
spca500 08ca:0103 Aiptek PocketDV
sunplus 08ca:0104 Aiptek PocketDVII 1.3
@ -236,15 +242,15 @@ pac7311 093a:2603 Philips SPC 500 NC
pac7311 093a:2608 Trust WB-3300p
pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
pac7311 093a:260f SnakeCam
pac7311 093a:2620 Apollo AC-905
pac7311 093a:2621 PAC731x
pac7311 093a:2622 Genius Eye 312
pac7311 093a:2624 PAC7302
pac7311 093a:2626 Labtec 2200
pac7311 093a:2628 Genius iLook 300
pac7311 093a:2629 Genious iSlim 300
pac7311 093a:262a Webcam 300k
pac7311 093a:262c Philips SPC 230 NC
pac7302 093a:2620 Apollo AC-905
pac7302 093a:2621 PAC731x
pac7302 093a:2622 Genius Eye 312
pac7302 093a:2624 PAC7302
pac7302 093a:2626 Labtec 2200
pac7302 093a:2628 Genius iLook 300
pac7302 093a:2629 Genious iSlim 300
pac7302 093a:262a Webcam 300k
pac7302 093a:262c Philips SPC 230 NC
jeilinj 0979:0280 Sakar 57379
zc3xx 0ac8:0302 Z-star Vimicro zc0302
vc032x 0ac8:0321 Vimicro generic vc0321
@ -259,6 +265,7 @@ vc032x 0ac8:c002 Sony embedded vimicro
vc032x 0ac8:c301 Samsung Q1 Ultra Premium
spca508 0af9:0010 Hama USB Sightcam 100
spca508 0af9:0011 Hama USB Sightcam 100
ov519 0b62:0059 iBOT2 Webcam
sonixb 0c45:6001 Genius VideoCAM NB
sonixb 0c45:6005 Microdia Sweex Mini Webcam
sonixb 0c45:6007 Sonix sn9c101 + Tas5110D
@ -318,8 +325,10 @@ sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
sunplus 0d64:0303 Sunplus FashionCam DXG
ov519 0e96:c001 TRUST 380 USB2 SPACEC@M
etoms 102c:6151 Qcam Sangha CIF
etoms 102c:6251 Qcam xxxxxx VGA
ov519 1046:9967 W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go
zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128
spca561 10fd:7e50 FlyCam Usb 100
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
@ -332,7 +341,12 @@ spca501 1776:501c Arowana 300K CMOS Camera
t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
sq905c 2770:9050 sq905c
sq905c 2770:905c DualCamera
sq905 2770:9120 Argus Digital Camera DC1512
sq905c 2770:913d sq905c
spca500 2899:012c Toptro Industrial
ov519 8020:ef04 ov519
spca508 8086:0110 Intel Easy PC Camera
spca500 8086:0630 Intel Pocket PC Camera
spca506 99fa:8988 Grandtec V.cap

157
Documentation/video4linux/sh_mobile_ceu_camera.txt Normal file
View File

@ -0,0 +1,157 @@
Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver
=======================================================================
Terminology
-----------
sensor scales: horizontal and vertical scales, configured by the sensor driver
host scales: -"- host driver
combined scales: sensor_scale * host_scale
Generic scaling / cropping scheme
---------------------------------
-1--
|
-2-- -\
| --\
| --\
+-5-- -\ -- -3--
| ---\
| --- -4-- -\
| -\
| - -6--
|
| - -6'-
| -/
| --- -4'- -/
| ---/
+-5'- -/
| -- -3'-
| --/
| --/
-2'- -/
|
|
-1'-
Produced by user requests:
S_CROP(left / top = (5) - (1), width / height = (5') - (5))
S_FMT(width / height = (6') - (6))
Here:
(1) to (1') - whole max width or height
(1) to (2) - sensor cropped left or top
(2) to (2') - sensor cropped width or height
(3) to (3') - sensor scale
(3) to (4) - CEU cropped left or top
(4) to (4') - CEU cropped width or height
(5) to (5') - reverse sensor scale applied to CEU cropped width or height
(2) to (5) - reverse sensor scale applied to CEU cropped left or top
(6) to (6') - CEU scale - user window
S_FMT
-----
Do not touch input rectangle - it is already optimal.
1. Calculate current sensor scales:
scale_s = ((3') - (3)) / ((2') - (2))
2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
current sensor scales onto input window - this is user S_CROP:
width_u = (5') - (5) = ((4') - (4)) * scale_s
3. Calculate new combined scales from "effective" input window to requested user
window:
scale_comb = width_u / ((6') - (6))
4. Calculate sensor output window by applying combined scales to real input
window:
width_s_out = ((2') - (2)) / scale_comb
5. Apply iterative sensor S_FMT for sensor output window.
subdev->video_ops->s_fmt(.width = width_s_out)
6. Retrieve sensor output window (g_fmt)
7. Calculate new sensor scales:
scale_s_new = ((3')_new - (3)_new) / ((2') - (2))
8. Calculate new CEU crop - apply sensor scales to previously calculated
"effective" crop:
width_ceu = (4')_new - (4)_new = width_u / scale_s_new
left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new
9. Use CEU cropping to crop to the new window:
ceu_crop(.width = width_ceu, .left = left_ceu)
10. Use CEU scaling to scale to the requested user window:
scale_ceu = width_ceu / width
S_CROP
------
If old scale applied to new crop is invalid produce nearest new scale possible
1. Calculate current combined scales.
scale_comb = (((4') - (4)) / ((6') - (6))) * (((2') - (2)) / ((3') - (3)))
2. Apply iterative sensor S_CROP for new input window.
3. If old combined scales applied to new crop produce an impossible user window,
adjust scales to produce nearest possible window.
width_u_out = ((5') - (5)) / scale_comb
if (width_u_out > max)
scale_comb = ((5') - (5)) / max;
else if (width_u_out < min)
scale_comb = ((5') - (5)) / min;
4. Issue G_CROP to retrieve actual input window.
5. Using actual input window and calculated combined scales calculate sensor
target output window.
width_s_out = ((3') - (3)) = ((2') - (2)) / scale_comb
6. Apply iterative S_FMT for new sensor target output window.
7. Issue G_FMT to retrieve the actual sensor output window.
8. Calculate sensor scales.
scale_s = ((3') - (3)) / ((2') - (2))
9. Calculate sensor output subwindow to be cropped on CEU by applying sensor
scales to the requested window.
width_ceu = ((5') - (5)) / scale_s
10. Use CEU cropping for above calculated window.
11. Calculate CEU scales from sensor scales from results of (10) and user window
from (3)
scale_ceu = calc_scale(((5') - (5)), &width_u_out)
12. Apply CEU scales.
--
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

16
Documentation/video4linux/v4l2-framework.txt
View File

@ -561,6 +561,8 @@ video_device helper functions
There are a few useful helper functions:
- file/video_device private data
You can set/get driver private data in the video_device struct using:
void *video_get_drvdata(struct video_device *vdev);
@ -575,8 +577,7 @@ struct video_device *video_devdata(struct file *file);
returns the video_device belonging to the file struct.
The final helper function combines video_get_drvdata with
video_devdata:
The video_drvdata function combines video_get_drvdata with video_devdata:
void *video_drvdata(struct file *file);
@ -584,6 +585,17 @@ You can go from a video_device struct to the v4l2_device struct using:
struct v4l2_device *v4l2_dev = vdev->v4l2_dev;
- Device node name
The video_device node kernel name can be retrieved using
const char *video_device_node_name(struct video_device *vdev);
The name is used as a hint by userspace tools such as udev. The function
should be used where possible instead of accessing the video_device::num and
video_device::minor fields.
video buffer helper functions
-----------------------------

260
Documentation/vm/hugetlbpage.txt
View File

@ -11,23 +11,21 @@ This optimization is more critical now as bigger and bigger physical memories
(several GBs) are more readily available.
Users can use the huge page support in Linux kernel by either using the mmap
system call or standard SYSv shared memory system calls (shmget, shmat).
system call or standard SYSV shared memory system calls (shmget, shmat).
First the Linux kernel needs to be built with the CONFIG_HUGETLBFS
(present under "File systems") and CONFIG_HUGETLB_PAGE (selected
automatically when CONFIG_HUGETLBFS is selected) configuration
options.
The kernel built with huge page support should show the number of configured
huge pages in the system by running the "cat /proc/meminfo" command.
The /proc/meminfo file provides information about the total number of
persistent hugetlb pages in the kernel's huge page pool. It also displays
information about the number of free, reserved and surplus huge pages and the
default huge page size. The huge page size is needed for generating the
proper alignment and size of the arguments to system calls that map huge page
regions.
/proc/meminfo also provides information about the total number of hugetlb
pages configured in the kernel. It also displays information about the
number of free hugetlb pages at any time. It also displays information about
the configured huge page size - this is needed for generating the proper
alignment and size of the arguments to the above system calls.
The output of "cat /proc/meminfo" will have lines like:
The output of "cat /proc/meminfo" will include lines like:
.....
HugePages_Total: vvv
@ -53,59 +51,63 @@ HugePages_Surp is short for "surplus," and is the number of huge pages in
/proc/filesystems should also show a filesystem of type "hugetlbfs" configured
in the kernel.
/proc/sys/vm/nr_hugepages indicates the current number of configured hugetlb
pages in the kernel. Super user can dynamically request more (or free some
pre-configured) huge pages.
The allocation (or deallocation) of hugetlb pages is possible only if there are
enough physically contiguous free pages in system (freeing of huge pages is
possible only if there are enough hugetlb pages free that can be transferred
back to regular memory pool).
/proc/sys/vm/nr_hugepages indicates the current number of "persistent" huge
pages in the kernel's huge page pool. "Persistent" huge pages will be
returned to the huge page pool when freed by a task. A user with root
privileges can dynamically allocate more or free some persistent huge pages
by increasing or decreasing the value of 'nr_hugepages'.
Pages that are used as hugetlb pages are reserved inside the kernel and cannot
be used for other purposes.
Pages that are used as huge pages are reserved inside the kernel and cannot
be used for other purposes. Huge pages cannot be swapped out under
memory pressure.
Once the kernel with Hugetlb page support is built and running, a user can
use either the mmap system call or shared memory system calls to start using
the huge pages. It is required that the system administrator preallocate
enough memory for huge page purposes.
Once a number of huge pages have been pre-allocated to the kernel huge page
pool, a user with appropriate privilege can use either the mmap system call
or shared memory system calls to use the huge pages. See the discussion of
Using Huge Pages, below.
The administrator can preallocate huge pages on the kernel boot command line by
specifying the "hugepages=N" parameter, where 'N' = the number of huge pages
requested. This is the most reliable method for preallocating huge pages as
memory has not yet become fragmented.
The administrator can allocate persistent huge pages on the kernel boot
command line by specifying the "hugepages=N" parameter, where 'N' = the
number of huge pages requested. This is the most reliable method of
allocating huge pages as memory has not yet become fragmented.
Some platforms support multiple huge page sizes. To preallocate huge pages
Some platforms support multiple huge page sizes. To allocate huge pages
of a specific size, one must preceed the huge pages boot command parameters
with a huge page size selection parameter "hugepagesz=<size>". <size> must
be specified in bytes with optional scale suffix [kKmMgG]. The default huge
page size may be selected with the "default_hugepagesz=<size>" boot parameter.
/proc/sys/vm/nr_hugepages indicates the current number of configured [default
size] hugetlb pages in the kernel. Super user can dynamically request more
(or free some pre-configured) huge pages.
Use the following command to dynamically allocate/deallocate default sized
huge pages:
When multiple huge page sizes are supported, /proc/sys/vm/nr_hugepages
indicates the current number of pre-allocated huge pages of the default size.
Thus, one can use the following command to dynamically allocate/deallocate
default sized persistent huge pages:
echo 20 > /proc/sys/vm/nr_hugepages
This command will try to configure 20 default sized huge pages in the system.
This command will try to adjust the number of default sized huge pages in the
huge page pool to 20, allocating or freeing huge pages, as required.
On a NUMA platform, the kernel will attempt to distribute the huge page pool
over the all on-line nodes. These huge pages, allocated when nr_hugepages
is increased, are called "persistent huge pages".
over all the set of allowed nodes specified by the NUMA memory policy of the
task that modifies nr_hugepages. The default for the allowed nodes--when the
task has default memory policy--is all on-line nodes with memory. Allowed
nodes with insufficient available, contiguous memory for a huge page will be
silently skipped when allocating persistent huge pages. See the discussion
below of the interaction of task memory policy, cpusets and per node attributes
with the allocation and freeing of persistent huge pages.
The success or failure of huge page allocation depends on the amount of
physically contiguous memory that is preset in system at the time of the
physically contiguous memory that is present in system at the time of the
allocation attempt. If the kernel is unable to allocate huge pages from
some nodes in a NUMA system, it will attempt to make up the difference by
allocating extra pages on other nodes with sufficient available contiguous
memory, if any.
System administrators may want to put this command in one of the local rc init
files. This will enable the kernel to request huge pages early in the boot
process when the possibility of getting physical contiguous pages is still
very high. Administrators can verify the number of huge pages actually
allocated by checking the sysctl or meminfo. To check the per node
System administrators may want to put this command in one of the local rc
init files. This will enable the kernel to allocate huge pages early in
the boot process when the possibility of getting physical contiguous pages
is still very high. Administrators can verify the number of huge pages
actually allocated by checking the sysctl or meminfo. To check the per node
distribution of huge pages in a NUMA system, use:
cat /sys/devices/system/node/node*/meminfo | fgrep Huge
@ -113,45 +115,47 @@ distribution of huge pages in a NUMA system, use:
/proc/sys/vm/nr_overcommit_hugepages specifies how large the pool of
huge pages can grow, if more huge pages than /proc/sys/vm/nr_hugepages are
requested by applications. Writing any non-zero value into this file
indicates that the hugetlb subsystem is allowed to try to obtain "surplus"
huge pages from the buddy allocator, when the normal pool is exhausted. As
these surplus huge pages go out of use, they are freed back to the buddy
allocator.
indicates that the hugetlb subsystem is allowed to try to obtain that
number of "surplus" huge pages from the kernel's normal page pool, when the
persistent huge page pool is exhausted. As these surplus huge pages become
unused, they are freed back to the kernel's normal page pool.
When increasing the huge page pool size via nr_hugepages, any surplus
When increasing the huge page pool size via nr_hugepages, any existing surplus
pages will first be promoted to persistent huge pages. Then, additional
huge pages will be allocated, if necessary and if possible, to fulfill
the new huge page pool size.
the new persistent huge page pool size.
The administrator may shrink the pool of preallocated huge pages for
The administrator may shrink the pool of persistent huge pages for
the default huge page size by setting the nr_hugepages sysctl to a
smaller value. The kernel will attempt to balance the freeing of huge pages
across all on-line nodes. Any free huge pages on the selected nodes will
be freed back to the buddy allocator.
across all nodes in the memory policy of the task modifying nr_hugepages.
Any free huge pages on the selected nodes will be freed back to the kernel's
normal page pool.
Caveat: Shrinking the pool via nr_hugepages such that it becomes less
than the number of huge pages in use will convert the balance to surplus
huge pages even if it would exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
Caveat: Shrinking the persistent huge page pool via nr_hugepages such that
it becomes less than the number of huge pages in use will convert the balance
of the in-use huge pages to surplus huge pages. This will occur even if
the number of surplus pages it would exceed the overcommit value. As long as
this condition holds--that is, until nr_hugepages+nr_overcommit_hugepages is
increased sufficiently, or the surplus huge pages go out of use and are freed--
no more surplus huge pages will be allowed to be allocated.
With support for multiple huge page pools at run-time available, much of
the huge page userspace interface has been duplicated in sysfs. The above
information applies to the default huge page size which will be
controlled by the /proc interfaces for backwards compatibility. The root
huge page control directory in sysfs is:
the huge page userspace interface in /proc/sys/vm has been duplicated in sysfs.
The /proc interfaces discussed above have been retained for backwards
compatibility. The root huge page control directory in sysfs is:
/sys/kernel/mm/hugepages
For each huge page size supported by the running kernel, a subdirectory
will exist, of the form
will exist, of the form:
hugepages-${size}kB
Inside each of these directories, the same set of files will exist:
nr_hugepages
nr_hugepages_mempolicy
nr_overcommit_hugepages
free_hugepages
resv_hugepages
@ -159,6 +163,102 @@ Inside each of these directories, the same set of files will exist:
which function as described above for the default huge page-sized case.
Interaction of Task Memory Policy with Huge Page Allocation/Freeing
Whether huge pages are allocated and freed via the /proc interface or
the /sysfs interface using the nr_hugepages_mempolicy attribute, the NUMA
nodes from which huge pages are allocated or freed are controlled by the
NUMA memory policy of the task that modifies the nr_hugepages_mempolicy
sysctl or attribute. When the nr_hugepages attribute is used, mempolicy
is ignored.
The recommended method to allocate or free huge pages to/from the kernel
huge page pool, using the nr_hugepages example above, is:
numactl --interleave <node-list> echo 20 \
>/proc/sys/vm/nr_hugepages_mempolicy
or, more succinctly:
numactl -m <node-list> echo 20 >/proc/sys/vm/nr_hugepages_mempolicy
This will allocate or free abs(20 - nr_hugepages) to or from the nodes
specified in <node-list>, depending on whether number of persistent huge pages
is initially less than or greater than 20, respectively. No huge pages will be
allocated nor freed on any node not included in the specified <node-list>.
When adjusting the persistent hugepage count via nr_hugepages_mempolicy, any
memory policy mode--bind, preferred, local or interleave--may be used. The
resulting effect on persistent huge page allocation is as follows:
1) Regardless of mempolicy mode [see Documentation/vm/numa_memory_policy.txt],
persistent huge pages will be distributed across the node or nodes
specified in the mempolicy as if "interleave" had been specified.
However, if a node in the policy does not contain sufficient contiguous
memory for a huge page, the allocation will not "fallback" to the nearest
neighbor node with sufficient contiguous memory. To do this would cause
undesirable imbalance in the distribution of the huge page pool, or
possibly, allocation of persistent huge pages on nodes not allowed by
the task's memory policy.
2) One or more nodes may be specified with the bind or interleave policy.
If more than one node is specified with the preferred policy, only the
lowest numeric id will be used. Local policy will select the node where
the task is running at the time the nodes_allowed mask is constructed.
For local policy to be deterministic, the task must be bound to a cpu or
cpus in a single node. Otherwise, the task could be migrated to some
other node at any time after launch and the resulting node will be
indeterminate. Thus, local policy is not very useful for this purpose.
Any of the other mempolicy modes may be used to specify a single node.
3) The nodes allowed mask will be derived from any non-default task mempolicy,
whether this policy was set explicitly by the task itself or one of its
ancestors, such as numactl. This means that if the task is invoked from a
shell with non-default policy, that policy will be used. One can specify a
node list of "all" with numactl --interleave or --membind [-m] to achieve
interleaving over all nodes in the system or cpuset.
4) Any task mempolicy specifed--e.g., using numactl--will be constrained by
the resource limits of any cpuset in which the task runs. Thus, there will
be no way for a task with non-default policy running in a cpuset with a
subset of the system nodes to allocate huge pages outside the cpuset
without first moving to a cpuset that contains all of the desired nodes.
5) Boot-time huge page allocation attempts to distribute the requested number
of huge pages over all on-lines nodes with memory.
Per Node Hugepages Attributes
A subset of the contents of the root huge page control directory in sysfs,
described above, will be replicated under each the system device of each
NUMA node with memory in:
/sys/devices/system/node/node[0-9]*/hugepages/
Under this directory, the subdirectory for each supported huge page size
contains the following attribute files:
nr_hugepages
free_hugepages
surplus_hugepages
The free_' and surplus_' attribute files are read-only. They return the number
of free and surplus [overcommitted] huge pages, respectively, on the parent
node.
The nr_hugepages attribute returns the total number of huge pages on the
specified node. When this attribute is written, the number of persistent huge
pages on the parent node will be adjusted to the specified value, if sufficient
resources exist, regardless of the task's mempolicy or cpuset constraints.
Note that the number of overcommit and reserve pages remain global quantities,
as we don't know until fault time, when the faulting task's mempolicy is
applied, from which node the huge page allocation will be attempted.
Using Huge Pages
If the user applications are going to request huge pages using mmap system
call, then it is required that system administrator mount a file system of
type hugetlbfs:
@ -206,9 +306,11 @@ map_hugetlb.c.
* requesting huge pages.
*
* For the ia64 architecture, the Linux kernel reserves Region number 4 for
* huge pages. That means the addresses starting with 0x800000... will need
* to be specified. Specifying a fixed address is not required on ppc64,
* i386 or x86_64.
* huge pages. That means that if one requires a fixed address, a huge page
* aligned address starting with 0x800000... will be required. If a fixed
* address is not required, the kernel will select an address in the proper
* range.
* Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
*
* Note: The default shared memory limit is quite low on many kernels,
* you may need to increase it via:
@ -237,14 +339,8 @@ map_hugetlb.c.
#define dprintf(x) printf(x)
/* Only ia64 requires this */
#ifdef __ia64__
#define ADDR (void *)(0x8000000000000000UL)
#define SHMAT_FLAGS (SHM_RND)
#else
#define ADDR (void *)(0x0UL)
#define ADDR (void *)(0x0UL) /* let kernel choose address */
#define SHMAT_FLAGS (0)
#endif
int main(void)
{
@ -302,10 +398,12 @@ int main(void)
* example, the app is requesting memory of size 256MB that is backed by
* huge pages.
*
* For ia64 architecture, Linux kernel reserves Region number 4 for huge pages.
* That means the addresses starting with 0x800000... will need to be
* specified. Specifying a fixed address is not required on ppc64, i386
* or x86_64.
* For the ia64 architecture, the Linux kernel reserves Region number 4 for
* huge pages. That means that if one requires a fixed address, a huge page
* aligned address starting with 0x800000... will be required. If a fixed
* address is not required, the kernel will select an address in the proper
* range.
* Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
*/
#include <stdlib.h>
#include <stdio.h>
@ -317,14 +415,8 @@ int main(void)
#define LENGTH (256UL*1024*1024)
#define PROTECTION (PROT_READ | PROT_WRITE)
/* Only ia64 requires this */
#ifdef __ia64__
#define ADDR (void *)(0x8000000000000000UL)
#define FLAGS (MAP_SHARED | MAP_FIXED)
#else
#define ADDR (void *)(0x0UL)
#define ADDR (void *)(0x0UL) /* let kernel choose address */
#define FLAGS (MAP_SHARED)
#endif
void check_bytes(char *addr)
{

52
Documentation/vm/hwpoison.txt
View File

@ -92,16 +92,62 @@ PR_MCE_KILL_GET
Testing:
madvise(MADV_POISON, ....)
madvise(MADV_HWPOISON, ....)
(as root)
Poison a page in the process for testing
hwpoison-inject module through debugfs
/sys/debug/hwpoison/corrupt-pfn
Inject hwpoison fault at PFN echoed into this file
/sys/debug/hwpoison/
corrupt-pfn
Inject hwpoison fault at PFN echoed into this file. This does
some early filtering to avoid corrupted unintended pages in test suites.
unpoison-pfn
Software-unpoison page at PFN echoed into this file. This
way a page can be reused again.
This only works for Linux injected failures, not for real
memory failures.
Note these injection interfaces are not stable and might change between
kernel versions
corrupt-filter-dev-major
corrupt-filter-dev-minor
Only handle memory failures to pages associated with the file system defined
by block device major/minor. -1U is the wildcard value.
This should be only used for testing with artificial injection.
corrupt-filter-memcg
Limit injection to pages owned by memgroup. Specified by inode number
of the memcg.
Example:
mkdir /cgroup/hwpoison
usemem -m 100 -s 1000 &
echo `jobs -p` > /cgroup/hwpoison/tasks
memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
page-types -p `pidof init` --hwpoison # shall do nothing
page-types -p `pidof usemem` --hwpoison # poison its pages
corrupt-filter-flags-mask
corrupt-filter-flags-value
When specified, only poison pages if ((page_flags & mask) == value).
This allows stress testing of many kinds of pages. The page_flags
are the same as in /proc/kpageflags. The flag bits are defined in
include/linux/kernel-page-flags.h and documented in
Documentation/vm/pagemap.txt
Architecture specific MCE injector

22
Documentation/vm/ksm.txt
View File

@ -16,9 +16,9 @@ by sharing the data common between them. But it can be useful to any
application which generates many instances of the same data.
KSM only merges anonymous (private) pages, never pagecache (file) pages.
KSM's merged pages are at present locked into kernel memory for as long
as they are shared: so cannot be swapped out like the user pages they
replace (but swapping KSM pages should follow soon in a later release).
KSM's merged pages were originally locked into kernel memory, but can now
be swapped out just like other user pages (but sharing is broken when they
are swapped back in: ksmd must rediscover their identity and merge again).
KSM only operates on those areas of address space which an application
has advised to be likely candidates for merging, by using the madvise(2)
@ -44,20 +44,12 @@ includes unmapped gaps (though working on the intervening mapped areas),
and might fail with EAGAIN if not enough memory for internal structures.
Applications should be considerate in their use of MADV_MERGEABLE,
restricting its use to areas likely to benefit. KSM's scans may use
a lot of processing power, and its kernel-resident pages are a limited
resource. Some installations will disable KSM for these reasons.
restricting its use to areas likely to benefit. KSM's scans may use a lot
of processing power: some installations will disable KSM for that reason.
The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
readable by all but writable only by root:
max_kernel_pages - set to maximum number of kernel pages that KSM may use
e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
Value 0 imposes no limit on the kernel pages KSM may use;
but note that any process using MADV_MERGEABLE can cause
KSM to allocate these pages, unswappable until it exits.
Default: quarter of memory (chosen to not pin too much)
pages_to_scan - how many present pages to scan before ksmd goes to sleep
e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
Default: 100 (chosen for demonstration purposes)
@ -75,7 +67,7 @@ run - set 0 to stop ksmd from running but keep merged pages,
The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
pages_shared - how many shared unswappable kernel pages KSM is using
pages_shared - how many shared pages are being used
pages_sharing - how many more sites are sharing them i.e. how much saved
pages_unshared - how many pages unique but repeatedly checked for merging
pages_volatile - how many pages changing too fast to be placed in a tree
@ -87,4 +79,4 @@ pages_volatile embraces several different kinds of activity, but a high
proportion there would also indicate poor use of madvise MADV_MERGEABLE.
Izik Eidus,
Hugh Dickins, 24 Sept 2009
Hugh Dickins, 17 Nov 2009

83
Documentation/vm/page-types.c
View File

@ -1,11 +1,22 @@
/*
* page-types: Tool for querying page flags
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; version 2.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should find a copy of v2 of the GNU General Public License somewhere on
* your Linux system; if not, write to the Free Software Foundation, Inc., 59
* Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* Copyright (C) 2009 Intel corporation
*
* Authors: Wu Fengguang <fengguang.wu@intel.com>
*
* Released under the General Public License (GPL).
*/
#define _LARGEFILE64_SOURCE
@ -100,7 +111,7 @@
#define BIT(name) (1ULL << KPF_##name)
#define BITS_COMPOUND (BIT(COMPOUND_HEAD) | BIT(COMPOUND_TAIL))
static char *page_flag_names[] = {
static const char *page_flag_names[] = {
[KPF_LOCKED] = "L:locked",
[KPF_ERROR] = "E:error",
[KPF_REFERENCED] = "R:referenced",
@ -173,7 +184,7 @@ static int kpageflags_fd;
static int opt_hwpoison;
static int opt_unpoison;
static char *hwpoison_debug_fs = "/debug/hwpoison";
static const char hwpoison_debug_fs[] = "/debug/hwpoison";
static int hwpoison_inject_fd;
static int hwpoison_forget_fd;
@ -560,7 +571,7 @@ static void walk_pfn(unsigned long voffset,
{
uint64_t buf[KPAGEFLAGS_BATCH];
unsigned long batch;
unsigned long pages;
long pages;
unsigned long i;
while (count) {
@ -673,30 +684,35 @@ static void usage(void)
printf(
"page-types [options]\n"
" -r|--raw Raw mode, for kernel developers\n"
" -a|--addr addr-spec Walk a range of pages\n"
" -b|--bits bits-spec Walk pages with specified bits\n"
" -p|--pid pid Walk process address space\n"
" -r|--raw Raw mode, for kernel developers\n"
" -d|--describe flags Describe flags\n"
" -a|--addr addr-spec Walk a range of pages\n"
" -b|--bits bits-spec Walk pages with specified bits\n"
" -p|--pid pid Walk process address space\n"
#if 0 /* planned features */
" -f|--file filename Walk file address space\n"
" -f|--file filename Walk file address space\n"
#endif
" -l|--list Show page details in ranges\n"
" -L|--list-each Show page details one by one\n"
" -N|--no-summary Don't show summay info\n"
" -X|--hwpoison hwpoison pages\n"
" -x|--unpoison unpoison pages\n"
" -h|--help Show this usage message\n"
" -l|--list Show page details in ranges\n"
" -L|--list-each Show page details one by one\n"
" -N|--no-summary Don't show summay info\n"
" -X|--hwpoison hwpoison pages\n"
" -x|--unpoison unpoison pages\n"
" -h|--help Show this usage message\n"
"flags:\n"
" 0x10 bitfield format, e.g.\n"
" anon bit-name, e.g.\n"
" 0x10,anon comma-separated list, e.g.\n"
"addr-spec:\n"
" N one page at offset N (unit: pages)\n"
" N+M pages range from N to N+M-1\n"
" N,M pages range from N to M-1\n"
" N, pages range from N to end\n"
" ,M pages range from 0 to M-1\n"
" N one page at offset N (unit: pages)\n"
" N+M pages range from N to N+M-1\n"
" N,M pages range from N to M-1\n"
" N, pages range from N to end\n"
" ,M pages range from 0 to M-1\n"
"bits-spec:\n"
" bit1,bit2 (flags & (bit1|bit2)) != 0\n"
" bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1\n"
" bit1,~bit2 (flags & (bit1|bit2)) == bit1\n"
" =bit1,bit2 flags == (bit1|bit2)\n"
" bit1,bit2 (flags & (bit1|bit2)) != 0\n"
" bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1\n"
" bit1,~bit2 (flags & (bit1|bit2)) == bit1\n"
" =bit1,bit2 flags == (bit1|bit2)\n"
"bit-names:\n"
);
@ -884,13 +900,23 @@ static void parse_bits_mask(const char *optarg)
add_bits_filter(mask, bits);
}
static void describe_flags(const char *optarg)
{
uint64_t flags = parse_flag_names(optarg, 0);
static struct option opts[] = {
printf("0x%016llx\t%s\t%s\n",
(unsigned long long)flags,
page_flag_name(flags),
page_flag_longname(flags));
}
static const struct option opts[] = {
{ "raw" , 0, NULL, 'r' },
{ "pid" , 1, NULL, 'p' },
{ "file" , 1, NULL, 'f' },
{ "addr" , 1, NULL, 'a' },
{ "bits" , 1, NULL, 'b' },
{ "describe" , 1, NULL, 'd' },
{ "list" , 0, NULL, 'l' },
{ "list-each" , 0, NULL, 'L' },
{ "no-summary", 0, NULL, 'N' },
@ -907,7 +933,7 @@ int main(int argc, char *argv[])
page_size = getpagesize();
while ((c = getopt_long(argc, argv,
"rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
"rp:f:a:b:d:lLNXxh", opts, NULL)) != -1) {
switch (c) {
case 'r':
opt_raw = 1;
@ -924,6 +950,9 @@ int main(int argc, char *argv[])
case 'b':
parse_bits_mask(optarg);
break;
case 'd':
describe_flags(optarg);
exit(0);
case 'l':
opt_list = 1;
break;

4
Kbuild
View File

@ -8,7 +8,7 @@
#####
# 1) Generate bounds.h
bounds-file := include/linux/bounds.h
bounds-file := include/generated/bounds.h
always := $(bounds-file)
targets := $(bounds-file) kernel/bounds.s
@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild
# 2) Generate asm-offsets.h
#
offsets-file := include/asm/asm-offsets.h
offsets-file := include/generated/asm-offsets.h
always += $(offsets-file)
targets += $(offsets-file)

66
MAINTAINERS
View File

@ -835,13 +835,13 @@ F: arch/arm/mach-pxa/palmte2.c
F: arch/arm/mach-pxa/include/mach/palmtc.h
F: arch/arm/mach-pxa/palmtc.c
ARM/PALM TREO 680 SUPPORT
ARM/PALM TREO SUPPORT
M: Tomas Cech <sleep_walker@suse.cz>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
F: arch/arm/mach-pxa/include/mach/treo680.h
F: arch/arm/mach-pxa/treo680.c
F: arch/arm/mach-pxa/include/mach/palmtreo.h
F: arch/arm/mach-pxa/palmtreo.c
ARM/PALMZ72 SUPPORT
M: Sergey Lapin <slapin@ossfans.org>
@ -1402,6 +1402,8 @@ L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/WUSB-Design-overview.txt
F: Documentation/usb/wusb-cbaf
F: drivers/usb/host/hwa-hc.c
F: drivers/usb/host/whci/
F: drivers/usb/wusbcore/
F: include/linux/usb/wusb*
@ -1470,6 +1472,12 @@ L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/fnic/
CMPC ACPI DRIVER
M: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
M: Daniel Oliveira Nascimento <don@syst.com.br>
S: Supported
F: drivers/platform/x86/classmate-laptop.c
CODA FILE SYSTEM
M: Jan Harkes <jaharkes@cs.cmu.edu>
M: coda@cs.cmu.edu
@ -1482,8 +1490,8 @@ F: include/linux/coda*.h
COMMON INTERNET FILE SYSTEM (CIFS)
M: Steve French <sfrench@samba.org>
L: linux-cifs-client@lists.samba.org
L: samba-technical@lists.samba.org
L: linux-cifs-client@lists.samba.org (moderated for non-subscribers)
L: samba-technical@lists.samba.org (moderated for non-subscribers)
W: http://linux-cifs.samba.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git
S: Supported
@ -2377,6 +2385,15 @@ W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
F: drivers/hwmon/hdaps.c
HWPOISON MEMORY FAILURE HANDLING
M: Andi Kleen <andi@firstfloor.org>
L: linux-mm@kvack.org
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
S: Maintained
F: mm/memory-failure.c
F: mm/hwpoison-inject.c
HYPERVISOR VIRTUAL CONSOLE DRIVER
L: linuxppc-dev@ozlabs.org
S: Odd Fixes
@ -3081,8 +3098,11 @@ S: Maintained
F: fs/autofs4/
KERNEL BUILD
M: Michal Marek <mmarek@suse.cz>
T: git git://repo.or.cz/linux-kbuild.git for-next
T: git git://repo.or.cz/linux-kbuild.git for-linus
L: linux-kbuild@vger.kernel.org
S: Orphan
S: Maintained
F: Documentation/kbuild/
F: Makefile
F: scripts/Makefile.*
@ -3124,7 +3144,6 @@ L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/kvm_svm.h
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
@ -3633,6 +3652,11 @@ W: http://0pointer.de/lennart/tchibo.html
S: Maintained
F: drivers/platform/x86/msi-laptop.c
MSI WMI SUPPORT
M: Anisse Astier <anisse@astier.eu>
S: Supported
F: drivers/platform/x86/msi-wmi.c
MULTIFUNCTION DEVICES (MFD)
M: Samuel Ortiz <sameo@linux.intel.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
@ -3666,7 +3690,7 @@ F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Felipe Balbi <felipe.balbi@nokia.com>
L: linux-usb@vger.kernel.org
T: git git://gitorious.org/musb/mainline.git
T: git git://gitorious.org/usb/usb.git
S: Maintained
F: drivers/usb/musb/
@ -5080,6 +5104,7 @@ F: drivers/char/specialix*
SPI SUBSYSTEM
M: David Brownell <dbrownell@users.sourceforge.net>
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general@lists.sourceforge.net
S: Maintained
F: Documentation/spi/
@ -5418,10 +5443,19 @@ ULTRA-WIDEBAND (UWB) SUBSYSTEM:
M: David Vrabel <david.vrabel@csr.com>
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/uwb/*
F: drivers/uwb/
X: drivers/uwb/wlp/
X: drivers/uwb/i1480/i1480u-wlp/
X: drivers/uwb/i1480/i1480-wlp.h
F: include/linux/uwb.h
F: include/linux/uwb/
UNIFDEF
M: Tony Finch <dot@dotat.at>
W: http://dotat.at/prog/unifdef
S: Maintained
F: scripts/unifdef.c
UNIFORM CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
W: http://www.kernel.dk
@ -5925,9 +5959,12 @@ W: http://linuxwimax.org
WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
M: David Vrabel <david.vrabel@csr.com>
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/wlp.h
F: drivers/uwb/wlp/
F: drivers/uwb/i1480/i1480u-wlp/
F: drivers/uwb/i1480/i1480-wlp.h
WISTRON LAPTOP BUTTON DRIVER
M: Miloslav Trmac <mitr@volny.cz>
@ -5973,6 +6010,7 @@ M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c
F: drivers/mfd/wm8*.c
F: drivers/power/wm83*.c
@ -5982,14 +6020,14 @@ F: drivers/video/backlight/wm83*_bl.c
F: drivers/watchdog/wm83*_wdt.c
F: include/linux/mfd/wm831x/
F: include/linux/mfd/wm8350/
F: include/linux/mfd/wm8400/
F: sound/soc/codecs/wm8350.c
F: sound/soc/codecs/wm8400.c
F: include/linux/mfd/wm8400*
F: sound/soc/codecs/wm8350.*
F: sound/soc/codecs/wm8400.*
X.25 NETWORK LAYER
M: Henner Eisen <eis@baty.hanse.de>
M: Andrew Hendry <andrew.hendry@gmail.com>
L: linux-x25@vger.kernel.org
S: Maintained
S: Odd Fixes
F: Documentation/networking/x25*
F: include/net/x25*
F: net/x25/

107
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 32
EXTRAVERSION =
SUBLEVEL = 33
EXTRAVERSION = -rc2
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
@ -16,6 +16,13 @@ NAME = Man-Eating Seals of Antiquity
# o print "Entering directory ...";
MAKEFLAGS += -rR --no-print-directory
# Avoid funny character set dependencies
unexport LC_ALL
LC_CTYPE=C
LC_COLLATE=C
LC_NUMERIC=C
export LC_CTYPE LC_COLLATE LC_NUMERIC
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
@ -334,10 +341,9 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
LINUXINCLUDE := -Iinclude \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
-I$(srctree)/arch/$(hdr-arch)/include \
-include include/linux/autoconf.h
LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \
$(if $(KBUILD_SRC), -I$(srctree)/include) \
-include include/generated/autoconf.h
KBUILD_CPPFLAGS := -D__KERNEL__
@ -465,7 +471,7 @@ ifeq ($(KBUILD_EXTMOD),)
# Carefully list dependencies so we do not try to build scripts twice
# in parallel
PHONY += scripts
scripts: scripts_basic include/config/auto.conf
scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
$(Q)$(MAKE) $(build)=$(@)
# Objects we will link into vmlinux / subdirs we need to visit
@ -492,18 +498,18 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
# with it and forgot to run make oldconfig.
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
# external modules needs include/linux/autoconf.h and include/config/auto.conf
# external modules needs include/generated/autoconf.h and include/config/auto.conf
# but do not care if they are up-to-date. Use auto.conf to trigger the test
PHONY += include/config/auto.conf
include/config/auto.conf:
$(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
$(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or $@ are missing."; \
echo " include/generated/autoconf.h or $@ are missing.";\
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
@ -877,6 +883,9 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
PHONY += $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
ifdef CONFIG_MODULES
$(Q)$(MAKE) $(modbuiltin)=$@
endif
# Build the kernel release string
#
@ -955,7 +964,6 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
# 2) Create the include2 directory, used for the second asm symlink
prepare3: include/config/kernel.release
ifneq ($(KBUILD_SRC),)
@$(kecho) ' Using $(srctree) as source for kernel'
@ -964,17 +972,13 @@ ifneq ($(KBUILD_SRC),)
echo " in the '$(srctree)' directory.";\
/bin/false; \
fi;
$(Q)if [ ! -d include2 ]; then \
mkdir -p include2; \
ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
fi
endif
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
include/asm include/config/auto.conf
prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
include/config/auto.conf
$(cmd_crmodverdir)
archprepare: prepare1 scripts_basic
@ -986,42 +990,6 @@ prepare0: archprepare FORCE
# All the preparing..
prepare: prepare0
# The asm symlink changes when $(ARCH) changes.
# Detect this and ask user to run make mrproper
# If asm is a stale symlink (point to dir that does not exist) remove it
define check-symlink
set -e; \
if [ -L include/asm ]; then \
asmlink=`readlink include/asm | cut -d '-' -f 2`; \
if [ "$$asmlink" != "$(SRCARCH)" ]; then \
echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \
echo " set ARCH or save .config and run 'make mrproper' to fix it"; \
exit 1; \
fi; \
test -e $$asmlink || rm include/asm; \
elif [ -d include/asm ]; then \
echo "ERROR: $@ is a directory but a symlink was expected";\
exit 1; \
fi
endef
# We create the target directory of the symlink if it does
# not exist so the test in check-symlink works and we have a
# directory for generated filesas used by some architectures.
define create-symlink
if [ ! -L include/asm ]; then \
$(kecho) ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \
if [ ! -d include/asm-$(SRCARCH) ]; then \
mkdir -p include/asm-$(SRCARCH); \
fi; \
ln -fsn asm-$(SRCARCH) $@; \
fi
endef
include/asm: FORCE
$(Q)$(check-symlink)
$(Q)$(create-symlink)
# Generate some files
# ---------------------------------------------------------------------------
@ -1046,7 +1014,7 @@ endef
include/linux/version.h: $(srctree)/Makefile FORCE
$(call filechk,version.h)
include/linux/utsrelease.h: include/config/kernel.release FORCE
include/generated/utsrelease.h: include/config/kernel.release FORCE
$(call filechk,utsrelease.h)
PHONY += headerdep
@ -1076,11 +1044,6 @@ firmware_install: FORCE
export INSTALL_HDR_PATH = $(objtree)/usr
hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
# Find out where the Kbuild file is located to support
# arch/$(ARCH)/include/asm
hdr-dir = $(strip \
$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \
arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch)))
# If we do an all arch process set dst to asm-$(hdr-arch)
hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
@ -1095,10 +1058,10 @@ headers_install_all:
PHONY += headers_install
headers_install: __headers
$(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \
$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
$(error Headers not exportable for the $(SRCARCH) architecture))
$(Q)$(MAKE) $(hdr-inst)=include
$(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst)
$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
PHONY += headers_check_all
headers_check_all: headers_install_all
@ -1107,7 +1070,7 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
$(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1
$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
# Modules
@ -1127,6 +1090,7 @@ all: modules
PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.builtin) > $(objtree)/modules.builtin
@$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
@ -1156,6 +1120,7 @@ _modinst_:
ln -s $(objtree) $(MODLIB)/build ; \
fi
@cp -f $(objtree)/modules.order $(MODLIB)/
@cp -f $(objtree)/modules.builtin $(MODLIB)/
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
# This depmod is only for convenience to give the initial
@ -1194,12 +1159,10 @@ CLEAN_FILES += vmlinux System.map \
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include2 usr/include include/generated
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
include/linux/bounds.h include/asm*/asm-offsets.h \
Module.symvers Module.markers tags TAGS cscope*
MRPROPER_DIRS += include/config usr/include include/generated
MRPROPER_FILES += .config .config.old .version .old_version \
include/linux/version.h \
Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
#
@ -1218,7 +1181,7 @@ clean: archclean $(clean-dirs)
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name 'Module.markers' -o -name '.tmp_*.o.*' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name '*.gcno' \) -type f -print | xargs rm -f
# mrproper - Delete all generated files, including .config
@ -1416,8 +1379,8 @@ $(clean-dirs):
clean: rm-dirs := $(MODVERDIR)
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
$(KBUILD_EXTMOD)/Module.markers \
$(KBUILD_EXTMOD)/modules.order
$(KBUILD_EXTMOD)/modules.order \
$(KBUILD_EXTMOD)/modules.builtin
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)

4
arch/Kconfig
View File

@ -135,9 +135,7 @@ config HAVE_DEFAULT_NO_SPIN_MUTEXES
config HAVE_HW_BREAKPOINT
bool
depends on HAVE_PERF_EVENTS
select ANON_INODES
select PERF_EVENTS
depends on PERF_EVENTS
config HAVE_USER_RETURN_NOTIFIER
bool

1
arch/alpha/Kconfig
View File

@ -9,6 +9,7 @@ config ALPHA
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_SYSCALL_WRAPPERS
select HAVE_PERF_EVENTS
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,

2
arch/alpha/boot/bootp.c
View File

@ -9,7 +9,7 @@
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/utsrelease.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>
#include <asm/system.h>

2
arch/alpha/boot/bootpz.c
View File

@ -11,7 +11,7 @@
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/utsrelease.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>
#include <asm/system.h>

2
arch/alpha/boot/main.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/utsrelease.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>
#include <asm/system.h>

1
arch/alpha/include/asm/asm-offsets.h Normal file
View File

@ -0,0 +1 @@
#include <generated/asm-offsets.h>

3
arch/alpha/include/asm/bug.h
View File

@ -13,7 +13,8 @@
"call_pal %0 # bugchk\n\t" \
".long %1\n\t.8byte %2" \
: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \
for ( ; ; ); } while (0)
unreachable(); \
} while (0)
#define HAVE_ARCH_BUG
#endif

34
arch/alpha/include/asm/core_t2.h
View File

@ -435,7 +435,7 @@ extern inline void t2_outl(u32 b, unsigned long addr)
set_hae(msb); \
}
extern spinlock_t t2_hae_lock;
extern raw_spinlock_t t2_hae_lock;
/*
* NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since
@ -448,12 +448,12 @@ __EXTERN_INLINE u8 t2_readb(const volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long result, msb;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
result = *(vip) ((addr << 5) + T2_SPARSE_MEM + 0x00);
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
return __kernel_extbl(result, addr & 3);
}
@ -462,12 +462,12 @@ __EXTERN_INLINE u16 t2_readw(const volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long result, msb;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08);
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
return __kernel_extwl(result, addr & 3);
}
@ -480,12 +480,12 @@ __EXTERN_INLINE u32 t2_readl(const volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long result, msb;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18);
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
return result & 0xffffffffUL;
}
@ -494,14 +494,14 @@ __EXTERN_INLINE u64 t2_readq(const volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long r0, r1, work, msb;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
work = (addr << 5) + T2_SPARSE_MEM + 0x18;
r0 = *(vuip)(work);
r1 = *(vuip)(work + (4 << 5));
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
return r1 << 32 | r0;
}
@ -510,13 +510,13 @@ __EXTERN_INLINE void t2_writeb(u8 b, volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long msb, w;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
w = __kernel_insbl(b, addr & 3);
*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x00) = w;
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
}
__EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr)
@ -524,13 +524,13 @@ __EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long msb, w;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
w = __kernel_inswl(b, addr & 3);
*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08) = w;
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
}
/*
@ -542,12 +542,12 @@ __EXTERN_INLINE void t2_writel(u32 b, volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long msb;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18) = b;
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
}
__EXTERN_INLINE void t2_writeq(u64 b, volatile void __iomem *xaddr)
@ -555,14 +555,14 @@ __EXTERN_INLINE void t2_writeq(u64 b, volatile void __iomem *xaddr)
unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
unsigned long msb, work;
unsigned long flags;
spin_lock_irqsave(&t2_hae_lock, flags);
raw_spin_lock_irqsave(&t2_hae_lock, flags);
t2_set_hae;
work = (addr << 5) + T2_SPARSE_MEM + 0x18;
*(vuip)work = b;
*(vuip)(work + (4 << 5)) = b >> 32;
spin_unlock_irqrestore(&t2_hae_lock, flags);
raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
}
__EXTERN_INLINE void __iomem *t2_ioportmap(unsigned long addr)

1
arch/alpha/include/asm/elf.h
View File

@ -81,7 +81,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
#define ELF_DATA ELFDATA2LSB
#define ELF_ARCH EM_ALPHA
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 8192
/* This is the location that an ET_DYN program is loaded if exec'ed. Typical

2
arch/alpha/include/asm/fcntl.h
View File

@ -16,7 +16,7 @@
#define O_NOATIME 04000000
#define O_CLOEXEC 010000000 /* set close_on_exec */
/*
* Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using
* Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using
* the O_SYNC flag. We continue to use the existing numerical value
* for O_DSYNC semantics now, but using the correct symbolic name for it.
* This new value is used to request true Posix O_SYNC semantics. It is

9
arch/alpha/include/asm/perf_event.h Normal file
View File

@ -0,0 +1,9 @@
#ifndef __ASM_ALPHA_PERF_EVENT_H
#define __ASM_ALPHA_PERF_EVENT_H
/* Alpha only supports software events through this interface. */
static inline void set_perf_event_pending(void) { }
#define PERF_EVENT_INDEX_OFFSET 0
#endif /* __ASM_ALPHA_PERF_EVENT_H */

38
arch/alpha/include/asm/spinlock.h
View File

@ -12,18 +12,18 @@
* We make no fairness assumptions. They have a cost.
*/
#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
#define __raw_spin_is_locked(x) ((x)->lock != 0)
#define __raw_spin_unlock_wait(x) \
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
#define arch_spin_is_locked(x) ((x)->lock != 0)
#define arch_spin_unlock_wait(x) \
do { cpu_relax(); } while ((x)->lock)
static inline void __raw_spin_unlock(raw_spinlock_t * lock)
static inline void arch_spin_unlock(arch_spinlock_t * lock)
{
mb();
lock->lock = 0;
}
static inline void __raw_spin_lock(raw_spinlock_t * lock)
static inline void arch_spin_lock(arch_spinlock_t * lock)
{
long tmp;
@ -43,24 +43,24 @@ static inline void __raw_spin_lock(raw_spinlock_t * lock)
: "m"(lock->lock) : "memory");
}
static inline int __raw_spin_trylock(raw_spinlock_t *lock)
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
return !test_and_set_bit(0, &lock->lock);
}
/***********************************************************/
static inline int __raw_read_can_lock(raw_rwlock_t *lock)
static inline int arch_read_can_lock(arch_rwlock_t *lock)
{
return (lock->lock & 1) == 0;
}
static inline int __raw_write_can_lock(raw_rwlock_t *lock)
static inline int arch_write_can_lock(arch_rwlock_t *lock)
{
return lock->lock == 0;
}
static inline void __raw_read_lock(raw_rwlock_t *lock)
static inline void arch_read_lock(arch_rwlock_t *lock)
{
long regx;
@ -80,7 +80,7 @@ static inline void __raw_read_lock(raw_rwlock_t *lock)
: "m" (*lock) : "memory");
}
static inline void __raw_write_lock(raw_rwlock_t *lock)
static inline void arch_write_lock(arch_rwlock_t *lock)
{
long regx;
@ -100,7 +100,7 @@ static inline void __raw_write_lock(raw_rwlock_t *lock)
: "m" (*lock) : "memory");
}
static inline int __raw_read_trylock(raw_rwlock_t * lock)
static inline int arch_read_trylock(arch_rwlock_t * lock)
{
long regx;
int success;
@ -122,7 +122,7 @@ static inline int __raw_read_trylock(raw_rwlock_t * lock)
return success;
}
static inline int __raw_write_trylock(raw_rwlock_t * lock)
static inline int arch_write_trylock(arch_rwlock_t * lock)
{
long regx;
int success;
@ -144,7 +144,7 @@ static inline int __raw_write_trylock(raw_rwlock_t * lock)
return success;
}
static inline void __raw_read_unlock(raw_rwlock_t * lock)
static inline void arch_read_unlock(arch_rwlock_t * lock)
{
long regx;
__asm__ __volatile__(
@ -160,17 +160,17 @@ static inline void __raw_read_unlock(raw_rwlock_t * lock)
: "m" (*lock) : "memory");
}
static inline void __raw_write_unlock(raw_rwlock_t * lock)
static inline void arch_write_unlock(arch_rwlock_t * lock)
{
mb();
lock->lock = 0;
}
#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
#define _raw_spin_relax(lock) cpu_relax()
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
#define arch_spin_relax(lock) cpu_relax()
#define arch_read_relax(lock) cpu_relax()
#define arch_write_relax(lock) cpu_relax()
#endif /* _ALPHA_SPINLOCK_H */

8
arch/alpha/include/asm/spinlock_types.h
View File

@ -7,14 +7,14 @@
typedef struct {
volatile unsigned int lock;
} raw_spinlock_t;
} arch_spinlock_t;
#define __RAW_SPIN_LOCK_UNLOCKED { 0 }
#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
typedef struct {
volatile unsigned int lock;
} raw_rwlock_t;
} arch_rwlock_t;
#define __RAW_RW_LOCK_UNLOCKED { 0 }
#define __ARCH_RW_LOCK_UNLOCKED { 0 }
#endif

17
arch/alpha/include/asm/unistd.h
View File

@ -247,6 +247,7 @@
#define __IGNORE_pause
#define __IGNORE_time
#define __IGNORE_utime
#define __IGNORE_umount2
/*
* Linux-specific system calls begin at 300
@ -434,10 +435,24 @@
#define __NR_timerfd 477
#define __NR_eventfd 478
#define __NR_recvmmsg 479
#define __NR_fallocate 480
#define __NR_timerfd_create 481
#define __NR_timerfd_settime 482
#define __NR_timerfd_gettime 483
#define __NR_signalfd4 484
#define __NR_eventfd2 485
#define __NR_epoll_create1 486
#define __NR_dup3 487
#define __NR_pipe2 488
#define __NR_inotify_init1 489
#define __NR_preadv 490
#define __NR_pwritev 491
#define __NR_rt_tgsigqueueinfo 492
#define __NR_perf_event_open 493
#ifdef __KERNEL__
#define NR_SYSCALLS 480
#define NR_SYSCALLS 494
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR

2
arch/alpha/kernel/core_t2.c
View File

@ -74,7 +74,7 @@
# define DBG(args)
#endif
DEFINE_SPINLOCK(t2_hae_lock);
DEFINE_RAW_SPINLOCK(t2_hae_lock);
static volatile unsigned int t2_mcheck_any_expected;
static volatile unsigned int t2_mcheck_last_taken;

Some files were not shown because too many files have changed in this diff Show More