Merge /spare/repo/linux-2.6/

This commit is contained in:
Jeff Garzik 2005-06-22 21:50:57 -04:00 committed by Jeff Garzik
commit a532434395
2167 changed files with 125201 additions and 59992 deletions

23
CREDITS
View File

@ -882,13 +882,12 @@ S: Blacksburg, Virginia 24061
S: USA
N: Randy Dunlap
E: rddunlap@osdl.org
E: rdunlap@xenotime.net
W: http://www.xenotime.net/linux/linux.html
W: http://www.linux-usb.org
D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
D: x86 SMP, ACPI, bootflag hacking
S: 12725 SW Millikan Way, Suite 400
S: Beaverton, Oregon 97005
S: (ask for current address)
S: USA
N: Bob Dunlop
@ -1881,6 +1880,13 @@ S: Schlehenweg 9
S: D-91080 Uttenreuth
S: Germany
N: Jaya Kumar
E: jayalk@intworks.biz
W: http://www.intworks.biz
D: Arc monochrome LCD framebuffer driver, x86 reboot fixups
S: Gurgaon, India
S: Kuala Lumpur, Malaysia
N: Gabor Kuti
M: seasons@falcon.sch.bme.hu
M: seasons@makosteszta.sote.hu
@ -2374,9 +2380,10 @@ E: tmolina@cablespeed.com
D: bug fixes, documentation, minor hackery
N: James Morris
E: jmorris@intercode.com.au
E: jmorris@redhat.com
W: http://www.intercode.com.au/jmorris/
D: Netfilter, Linux Security Modules (LSM).
D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec,
D: Crypto API, general networking, miscellaneous.
S: PO Box 707
S: Spit Junction NSW 2088
S: Australia
@ -2476,13 +2483,9 @@ S: Potsdam, New York 13676
S: USA
N: Dave Neuer
E: dneuer@innovation-charter.com
E: mr_fred_smoothie@yahoo.com
E: dave.neuer@pobox.com
D: Helped implement support for Compaq's H31xx series iPAQs
D: Other mostly minor tweaks & bugfixes
S: 325 E. Main St., Suite 3
S: Carnegie, PA 15105
S: USA
N: Michael Neuffer
E: mike@i-Connect.Net

View File

@ -8,7 +8,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml scsidrivers.xml \
procfs-guide.xml writing_usb_driver.xml \
sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml

View File

@ -338,7 +338,6 @@ X!Earch/i386/kernel/mca.c
X!Iinclude/linux/device.h
-->
!Edrivers/base/driver.c
!Edrivers/base/class_simple.c
!Edrivers/base/core.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c

View File

@ -14,7 +14,7 @@
</authorgroup>
<copyright>
<year>2003</year>
<year>2003-2005</year>
<holder>Jeff Garzik</holder>
</copyright>
@ -44,30 +44,38 @@
<toc></toc>
<chapter id="libataThanks">
<title>Thanks</title>
<chapter id="libataIntroduction">
<title>Introduction</title>
<para>
The bulk of the ATA knowledge comes thanks to long conversations with
Andre Hedrick (www.linux-ide.org).
libATA is a library used inside the Linux kernel to support ATA host
controllers and devices. libATA provides an ATA driver API, class
transports for ATA and ATAPI devices, and SCSI&lt;-&gt;ATA translation
for ATA devices according to the T10 SAT specification.
</para>
<para>
Thanks to Alan Cox for pointing out similarities
between SATA and SCSI, and in general for motivation to hack on
libata.
</para>
<para>
libata's device detection
method, ata_pio_devchk, and in general all the early probing was
based on extensive study of Hale Landis's probe/reset code in his
ATADRVR driver (www.ata-atapi.com).
This Guide documents the libATA driver API, library functions, library
internals, and a couple sample ATA low-level drivers.
</para>
</chapter>
<chapter id="libataDriverApi">
<title>libata Driver API</title>
<para>
struct ata_port_operations is defined for every low-level libata
hardware driver, and it controls how the low-level driver
interfaces with the ATA and SCSI layers.
</para>
<para>
FIS-based drivers will hook into the system with ->qc_prep() and
->qc_issue() high-level hooks. Hardware which behaves in a manner
similar to PCI IDE hardware may utilize several generic helpers,
defining at a bare minimum the bus I/O addresses of the ATA shadow
register blocks.
</para>
<sect1>
<title>struct ata_port_operations</title>
<sect2><title>Disable ATA port</title>
<programlisting>
void (*port_disable) (struct ata_port *);
</programlisting>
@ -78,6 +86,9 @@ void (*port_disable) (struct ata_port *);
unplug).
</para>
</sect2>
<sect2><title>Post-IDENTIFY device configuration</title>
<programlisting>
void (*dev_config) (struct ata_port *, struct ata_device *);
</programlisting>
@ -88,6 +99,9 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
</sect2>
<sect2><title>Set PIO/DMA mode</title>
<programlisting>
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
@ -108,6 +122,9 @@ void (*post_set_mode) (struct ata_port *ap);
->set_dma_mode() is only called if DMA is possible.
</para>
</sect2>
<sect2><title>Taskfile read/write</title>
<programlisting>
void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@ -120,6 +137,9 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
taskfile register values.
</para>
</sect2>
<sect2><title>ATA command execute</title>
<programlisting>
void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
@ -129,17 +149,37 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
->tf_load(), to be initiated in hardware.
</para>
</sect2>
<sect2><title>Per-cmd ATAPI DMA capabilities filter</title>
<programlisting>
u8 (*check_status)(struct ata_port *ap);
void (*dev_select)(struct ata_port *ap, unsigned int device);
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
</programlisting>
<para>
Reads the Status ATA shadow register from hardware. On some
hardware, this has the side effect of clearing the interrupt
condition.
Allow low-level driver to filter ATA PACKET commands, returning a status
indicating whether or not it is OK to use DMA for the supplied PACKET
command.
</para>
</sect2>
<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
u8 (*check_status)(struct ata_port *ap);
u8 (*check_altstatus)(struct ata_port *ap);
u8 (*check_err)(struct ata_port *ap);
</programlisting>
<para>
Reads the Status/AltStatus/Error ATA shadow register from
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
</para>
</sect2>
<sect2><title>Select ATA device on bus</title>
<programlisting>
void (*dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
@ -147,9 +187,13 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
<para>
Issues the low-level hardware command(s) that causes one of N
hardware devices to be considered 'selected' (active and
available for use) on the ATA bus.
available for use) on the ATA bus. This generally has no
meaning on FIS-based devices.
</para>
</sect2>
<sect2><title>Reset ATA bus</title>
<programlisting>
void (*phy_reset) (struct ata_port *ap);
</programlisting>
@ -162,17 +206,31 @@ void (*phy_reset) (struct ata_port *ap);
functions ata_bus_reset() or sata_phy_reset() for this hook.
</para>
</sect2>
<sect2><title>Control PCI IDE BMDMA engine</title>
<programlisting>
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
void (*bmdma_stop) (struct ata_port *ap);
u8 (*bmdma_status) (struct ata_port *ap);
</programlisting>
<para>
When setting up an IDE BMDMA transaction, these hooks arm
(->bmdma_setup) and fire (->bmdma_start) the hardware's DMA
engine.
When setting up an IDE BMDMA transaction, these hooks arm
(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
the hardware's DMA engine. ->bmdma_status is used to read the standard
PCI IDE DMA Status register.
</para>
<para>
These hooks are typically either no-ops, or simply not implemented, in
FIS-based drivers.
</para>
</sect2>
<sect2><title>High-level taskfile hooks</title>
<programlisting>
void (*qc_prep) (struct ata_queued_cmd *qc);
int (*qc_issue) (struct ata_queued_cmd *qc);
@ -190,20 +248,26 @@ int (*qc_issue) (struct ata_queued_cmd *qc);
->qc_issue is used to make a command active, once the hardware
and S/G tables have been prepared. IDE BMDMA drivers use the
helper function ata_qc_issue_prot() for taskfile protocol-based
dispatch. More advanced drivers roll their own ->qc_issue
implementation, using this as the "issue new ATA command to
hardware" hook.
dispatch. More advanced drivers implement their own ->qc_issue.
</para>
</sect2>
<sect2><title>Timeout (error) handling</title>
<programlisting>
void (*eng_timeout) (struct ata_port *ap);
</programlisting>
<para>
This is a high level error handling function, called from the
error handling thread, when a command times out.
This is a high level error handling function, called from the
error handling thread, when a command times out. Most newer
hardware will implement its own error handling code here. IDE BMDMA
drivers may use the helper function ata_eng_timeout().
</para>
</sect2>
<sect2><title>Hardware interrupt handling</title>
<programlisting>
irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
void (*irq_clear) (struct ata_port *);
@ -216,6 +280,9 @@ void (*irq_clear) (struct ata_port *);
is quiet.
</para>
</sect2>
<sect2><title>SATA phy read/write</title>
<programlisting>
u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
@ -227,6 +294,9 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
if ->phy_reset hook called the sata_phy_reset() helper function.
</para>
</sect2>
<sect2><title>Init and shutdown</title>
<programlisting>
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
@ -240,15 +310,17 @@ void (*host_stop) (struct ata_host_set *host_set);
tasks.
</para>
<para>
->host_stop() is called when the rmmod or hot unplug process
begins. The hook must stop all hardware interrupts, DMA
engines, etc.
</para>
<para>
->port_stop() is called after ->host_stop(). It's sole function
is to release DMA/memory resources, now that they are no longer
actively being used.
</para>
<para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.
</para>
</sect2>
</sect1>
</chapter>
@ -279,4 +351,24 @@ void (*host_stop) (struct ata_host_set *host_set);
!Idrivers/scsi/sata_sil.c
</chapter>
<chapter id="libataThanks">
<title>Thanks</title>
<para>
The bulk of the ATA knowledge comes thanks to long conversations with
Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
and SCSI specifications.
</para>
<para>
Thanks to Alan Cox for pointing out similarities
between SATA and SCSI, and in general for motivation to hack on
libata.
</para>
<para>
libata's device detection
method, ata_pio_devchk, and in general all the early probing was
based on extensive study of Hale Landis's probe/reset code in his
ATADRVR driver (www.ata-atapi.com).
</para>
</chapter>
</book>

View File

@ -1,193 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="scsidrivers">
<bookinfo>
<title>SCSI Subsystem Interfaces</title>
<authorgroup>
<author>
<firstname>Douglas</firstname>
<surname>Gilbert</surname>
<affiliation>
<address>
<email>dgilbert@interlog.com</email>
</address>
</affiliation>
</author>
</authorgroup>
<pubdate>2003-08-11</pubdate>
<copyright>
<year>2002</year>
<year>2003</year>
<holder>Douglas Gilbert</holder>
</copyright>
<legalnotice>
<para>
This documentation is free software; you can redistribute
it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="intro">
<title>Introduction</title>
<para>
This document outlines the interface between the Linux scsi mid level
and lower level drivers. Lower level drivers are variously called HBA
(host bus adapter) drivers, host drivers (HD) or pseudo adapter drivers.
The latter alludes to the fact that a lower level driver may be a
bridge to another IO subsystem (and the "ide-scsi" driver is an example
of this). There can be many lower level drivers active in a running
system, but only one per hardware type. For example, the aic7xxx driver
controls adaptec controllers based on the 7xxx chip series. Most lower
level drivers can control one or more scsi hosts (a.k.a. scsi initiators).
</para>
<para>
This document can been found in an ASCII text file in the linux kernel
source: <filename>Documentation/scsi/scsi_mid_low_api.txt</filename> .
It currently hold a little more information than this document. The
<filename>drivers/scsi/hosts.h</filename> and <filename>
drivers/scsi/scsi.h</filename> headers contain descriptions of members
of important structures for the scsi subsystem.
</para>
</chapter>
<chapter id="driver-struct">
<title>Driver structure</title>
<para>
Traditionally a lower level driver for the scsi subsystem has been
at least two files in the drivers/scsi directory. For example, a
driver called "xyz" has a header file "xyz.h" and a source file
"xyz.c". [Actually there is no good reason why this couldn't all
be in one file.] Some drivers that have been ported to several operating
systems (e.g. aic7xxx which has separate files for generic and
OS-specific code) have more than two files. Such drivers tend to have
their own directory under the drivers/scsi directory.
</para>
<para>
scsi_module.c is normally included at the end of a lower
level driver. For it to work a declaration like this is needed before
it is included:
<programlisting>
static Scsi_Host_Template driver_template = DRIVER_TEMPLATE;
/* DRIVER_TEMPLATE should contain pointers to supported interface
functions. Scsi_Host_Template is defined hosts.h */
#include "scsi_module.c"
</programlisting>
</para>
<para>
The scsi_module.c assumes the name "driver_template" is appropriately
defined. It contains 2 functions:
<orderedlist>
<listitem><para>
init_this_scsi_driver() called during builtin and module driver
initialization: invokes mid level's scsi_register_host()
</para></listitem>
<listitem><para>
exit_this_scsi_driver() called during closedown: invokes
mid level's scsi_unregister_host()
</para></listitem>
</orderedlist>
</para>
<para>
When a new, lower level driver is being added to Linux, the following
files (all found in the drivers/scsi directory) will need some attention:
Makefile, Config.help and Config.in . It is probably best to look at what
an existing lower level driver does in this regard.
</para>
</chapter>
<chapter id="intfunctions">
<title>Interface Functions</title>
!EDocumentation/scsi/scsi_mid_low_api.txt
</chapter>
<chapter id="locks">
<title>Locks</title>
<para>
Each Scsi_Host instance has a spin_lock called Scsi_Host::default_lock
which is initialized in scsi_register() [found in hosts.c]. Within the
same function the Scsi_Host::host_lock pointer is initialized to point
at default_lock with the scsi_assign_lock() function. Thereafter
lock and unlock operations performed by the mid level use the
Scsi_Host::host_lock pointer.
</para>
<para>
Lower level drivers can override the use of Scsi_Host::default_lock by
using scsi_assign_lock(). The earliest opportunity to do this would
be in the detect() function after it has invoked scsi_register(). It
could be replaced by a coarser grain lock (e.g. per driver) or a
lock of equal granularity (i.e. per host). Using finer grain locks
(e.g. per scsi device) may be possible by juggling locks in
queuecommand().
</para>
</chapter>
<chapter id="changes">
<title>Changes since lk 2.4 series</title>
<para>
io_request_lock has been replaced by several finer grained locks. The lock
relevant to lower level drivers is Scsi_Host::host_lock and there is one
per scsi host.
</para>
<para>
The older error handling mechanism has been removed. This means the
lower level interface functions abort() and reset() have been removed.
</para>
<para>
In the 2.4 series the scsi subsystem configuration descriptions were
aggregated with the configuration descriptions from all other Linux
subsystems in the Documentation/Configure.help file. In the 2.5 series,
the scsi subsystem now has its own (much smaller) drivers/scsi/Config.help
file.
</para>
</chapter>
<chapter id="credits">
<title>Credits</title>
<para>
The following people have contributed to this document:
<orderedlist>
<listitem><para>
Mike Anderson <email>andmike@us.ibm.com</email>
</para></listitem>
<listitem><para>
James Bottomley <email>James.Bottomley@steeleye.com</email>
</para></listitem>
<listitem><para>
Patrick Mansfield <email>patmans@us.ibm.com</email>
</para></listitem>
</orderedlist>
</para>
</chapter>
</book>

View File

@ -271,7 +271,7 @@ patch, which certifies that you wrote it or otherwise have the right to
pass it on as a open-source patch. The rules are pretty simple: if you
can certify the below:
Developer's Certificate of Origin 1.0
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
@ -291,6 +291,12 @@ can certify the below:
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved.
then you just add a line saying
Signed-off-by: Random J Developer <random@developer.org>

View File

@ -0,0 +1,128 @@
CPU frequency and voltage scaling statictics in the Linux(TM) kernel
L i n u x c p u f r e q - s t a t s d r i v e r
- information for users -
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Contents
1. Introduction
2. Statistics Provided (with example)
3. Configuring cpufreq-stats
1. Introduction
cpufreq-stats is a driver that provices CPU frequency statistics for each CPU.
This statistics is provided in /sysfs as a bunch of read_only interfaces. This
interface (when configured) will appear in a seperate directory under cpufreq
in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
Various statistics will form read_only files under this directory.
This driver is designed to be independent of any particular cpufreq_driver
that may be running on your CPU. So, it will work with any cpufreq_driver.
2. Statistics Provided (with example)
cpufreq stats provides following statistics (explained in detail below).
- time_in_state
- total_trans
- trans_table
All the statistics will be from the time the stats driver has been inserted
to the time when a read of a particular statistic is done. Obviously, stats
driver will not have any information about the the frequcny transitions before
the stats driver insertion.
--------------------------------------------------------------------------------
<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
total 0
drwxr-xr-x 2 root root 0 May 14 16:06 .
drwxr-xr-x 3 root root 0 May 14 15:58 ..
-r--r--r-- 1 root root 4096 May 14 16:06 time_in_state
-r--r--r-- 1 root root 4096 May 14 16:06 total_trans
-r--r--r-- 1 root root 4096 May 14 16:06 trans_table
--------------------------------------------------------------------------------
- time_in_state
This gives the amount of time spent in each of the frequencies supported by
this CPU. The cat output will have "<frequency> <time>" pair in each line, which
will mean this CPU spent <time> usertime units of time at <frequency>. Output
will have one line for each of the supported freuencies. usertime units here
is 10mS (similar to other time exported in /proc).
--------------------------------------------------------------------------------
<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state
3600000 2089
3400000 136
3200000 34
3000000 67
2800000 172488
--------------------------------------------------------------------------------
- total_trans
This gives the total number of frequency transitions on this CPU. The cat
output will have a single count which is the total number of frequency
transitions.
--------------------------------------------------------------------------------
<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
20
--------------------------------------------------------------------------------
- trans_table
This will give a fine grained information about all the CPU frequency
transitions. The cat output here is a two dimensional matrix, where an entry
<i,j> (row i, column j) represents the count of number of transitions from
Freq_i to Freq_j. Freq_i is in descending order with increasing rows and
Freq_j is in descending order with increasing columns. The output here also
contains the actual freq values for each row and column for better readability.
--------------------------------------------------------------------------------
<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
From : To
: 3600000 3400000 3200000 3000000 2800000
3600000: 0 5 0 0 0
3400000: 4 0 2 0 0
3200000: 0 1 0 2 0
3000000: 0 0 1 0 3
2800000: 0 0 0 2 0
--------------------------------------------------------------------------------
3. Configuring cpufreq-stats
To configure cpufreq-stats in your kernel
Config Main Menu
Power management options (ACPI, APM) --->
CPU Frequency scaling --->
[*] CPU Frequency scaling
<*> CPU frequency translation statistics
[*] CPU frequency translation statistics details
"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
cpufreq-stats.
"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the
basic statistics which includes time_in_state and total_trans.
"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS)
provides fine grained cpufreq stats by trans_table. The reason for having a
seperate config option for trans_table is:
- trans_table goes against the traditional /sysfs rule of one value per
interface. It provides a whole bunch of value in a 2 dimensional matrix
form.
Once these two options are enabled and your CPU supports cpufrequency, you
will be able to see the CPU frequency statistics in /sysfs.

View File

@ -252,8 +252,7 @@ in a tasks processor placement.
There is an exception to the above. If hotplug funtionality is used
to remove all the CPUs that are currently assigned to a cpuset,
then the kernel will automatically update the cpus_allowed of all
tasks attached to CPUs in that cpuset with the online CPUs of the
nearest parent cpuset that still has some CPUs online. When memory
tasks attached to CPUs in that cpuset to allow all CPUs. When memory
hotplug functionality for removing Memory Nodes is available, a
similar exception is expected to apply there as well. In general,
the kernel prefers to violate cpuset placement, over starving a task

View File

@ -76,6 +76,14 @@ driver_data: Driver-specific data.
platform_data: Platform data specific to the device.
Example: for devices on custom boards, as typical of embedded
and SOC based hardware, Linux often uses platform_data to point
to board-specific structures describing devices and how they
are wired. That can include what ports are available, chip
variants, which GPIO pins act in what additional roles, and so
on. This shrinks the "Board Support Packages" (BSPs) and
minimizes board-specific #ifdefs in drivers.
current_state: Current power state of the device.
saved_state: Pointer to saved state of the device. This is usable by

View File

@ -5,21 +5,17 @@ struct device_driver {
char * name;
struct bus_type * bus;
rwlock_t lock;
atomic_t refcount;
list_t bus_list;
struct completion unloaded;
struct kobject kobj;
list_t devices;
struct driver_dir_entry dir;
struct module *owner;
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
int (*suspend) (struct device * dev, pm_message_t state, u32 level);
int (*resume) (struct device * dev, u32 level);
void (*release) (struct device_driver * drv);
};
@ -51,7 +47,6 @@ being converted completely to the new model.
static struct device_driver eepro100_driver = {
.name = "eepro100",
.bus = &pci_bus_type,
.devclass = &ethernet_devclass, /* when it's implemented */
.probe = eepro100_probe,
.remove = eepro100_remove,
@ -85,7 +80,6 @@ static struct pci_driver eepro100_driver = {
.driver = {
.name = "eepro100",
.bus = &pci_bus_type,
.devclass = &ethernet_devclass, /* when it's implemented */
.probe = eepro100_probe,
.remove = eepro100_remove,
.suspend = eepro100_suspend,
@ -166,27 +160,32 @@ Callbacks
int (*probe) (struct device * dev);
probe is called to verify the existence of a certain type of
hardware. This is called during the driver binding process, after the
bus has verified that the device ID of a device matches one of the
device IDs supported by the driver.
The probe() entry is called in task context, with the bus's rwsem locked
and the driver partially bound to the device. Drivers commonly use
container_of() to convert "dev" to a bus-specific type, both in probe()
and other routines. That type often provides device resource data, such
as pci_dev.resource[] or platform_device.resources, which is used in
addition to dev->platform_data to initialize the driver.
This callback only verifies that there actually is supported hardware
present. It may allocate a driver-specific structure, but it should
not do any initialization of the hardware itself. The device-specific
structure may be stored in the device's driver_data field.
This callback holds the driver-specific logic to bind the driver to a
given device. That includes verifying that the device is present, that
it's a version the driver can handle, that driver data structures can
be allocated and initialized, and that any hardware can be initialized.
Drivers often store a pointer to their state with dev_set_drvdata().
When the driver has successfully bound itself to that device, then probe()
returns zero and the driver model code will finish its part of binding
the driver to that device.
int (*init) (struct device * dev);
init is called during the binding stage. It is called after probe has
successfully returned and the device has been registered with its
class. It is responsible for initializing the hardware.
A driver's probe() may return a negative errno value to indicate that
the driver did not bind to this device, in which case it should have
released all reasources it allocated.
int (*remove) (struct device * dev);
remove is called to dissociate a driver with a device. This may be
remove is called to unbind a driver from a device. This may be
called if a device is physically removed from the system, if the
driver module is being unloaded, or during a reboot sequence.
driver module is being unloaded, during a reboot sequence, or
in other cases.
It is up to the driver to determine if the device is present or
not. It should free any resources allocated specifically for the

View File

@ -0,0 +1,205 @@
This README escorted the skystar2-driver rewriting procedure. It describes the
state of the new flexcop-driver set and some internals are written down here
too.
This document hopefully describes things about the flexcop and its
device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
drivers based on the skystar2.c and other information.
Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
touched and rewritten.
History & News
==============
2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
General coding processing
=========================
We should proceed as follows (as long as no one complains):
0) Think before start writing code!
1) rewriting the skystar2.c with the help of the flexcop register descriptions
and splitting up the files to a pci-bus-part and a flexcop-part.
The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
and other pci drivers)
3) make some beautification (see 'Improvements when rewriting (refactoring) is
done')
4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
a wider tester audience.
5) creating an usb-bus-part using the already written flexcop code for the pci
card.
Idea: create a kernel-object for the flexcop and export all important
functions. This option saves kernel-memory, but maybe a lot of functions have
to be exported to kernel namespace.
Current situation
=================
0) Done :)
1) Done (some minor issues left)
2) Done
3) Not ready yet, more information is necessary
4) next to be done (see the table below)
5) USB driver is working (yes, there are some minor issues)
What seems to be ready?
-----------------------
1) Rewriting
1a) i2c is cut off from the flexcop-pci.c and seems to work
1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
1e) eeprom (reading MAC address)
1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
1f) misc. register accesses for reading parameters (e.g. resetting, revision)
1g) pid/mac filter (flexcop-hw-filter.c)
1i) dvb-stuff initialization in flexcop.c (done)
1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
1j) remove flexcop initialization from flexcop-pci.c completely (done)
1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
non-static where possible, moved code to proper places)
2) Search for errors in the leftover of flexcop-pci.c (partially done)
5a) add MAC address reading
5c) feeding of ISOC data to the software demux (format of the isochronous data
and speed optimization, no real error) (thanks to Vadim Catana)
What to do in the near future?
--------------------------------------
(no special order here)
5) USB driver
5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
Testing changes
---------------
O = item is working
P = item is partially working
X = item is not working
N = item does not apply here
<empty field> = item need to be examined
| PCI | USB
item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
-------+-------+---------+---------+-------+-------+---------+---------+-------
1a) | O | | | | N | N | N | N
1b) | O | | | | | | O |
1c) | N | N | | | N | N | O |
1d) | O | O
1e) | O | O
1f) | P
1g) | O
1h) | P |
1i) | O | N
1j) | O | N
1l) | O | N
2) | O | N
5a) | N | O
5b)* | N |
5c) | N | O
* - not done yet
Known bugs and problems and TODO
--------------------------------
1g/h/l) when pid filtering is enabled on the pci card
DMA usage currently:
The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
address and triggers an IRQ when it's full and starts writing to the second
address. When the second address is full, the IRQ is triggered again, and
the flexcop writes to first address again, and so on.
The buffersize of each address is currently 640*188 bytes.
Problem is, when using hw-pid-filtering and doing some low-bandwidth
operation (like scanning) the buffers won't be filled enough to trigger
the IRQ. That's why:
When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
is triggered. Is the current write address of DMA1 different to the one
during the last IRQ, then the data is passed to the demuxer.
There is an additional DMA-IRQ-method: packet count IRQ. This isn't
implemented correctly yet.
The solution is to disable HW PID filtering, but I don't know how the DVB
API software demux behaves on slow systems with 45MBit/s TS.
Solved bugs :)
--------------
1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
working)
SOLUTION: also index 0 was affected, because net_translation is done for
these indexes by default
5b) isochronous transfer does only work in the first attempt (for the Sky2PC
USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
woke up again (don't know if this need fixes, see
flexcop-fe-tuner.c:flexcop_sleep)
NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
anything in the while the driver is loaded the first time), no transfers take
place anymore.
Improvements when rewriting (refactoring) is done
=================================================
- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
(enable sleeping for other demods than dvb-s)
- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
Debugging
---------
- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
with this flexcop, this is important, because i2c is now using the
flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
that, please tell us so).
Everything which is identical in the following table, can be put into a common
flexcop-module.
PCI USB
-------------------------------------------------------------------------------
Different:
Register access: accessing IO memory USB control message
I2C bus: I2C bus of the FC USB control message
Data transfer: DMA isochronous transfer
EEPROM transfer: through i2c bus not clear yet
Identical:
Streaming: accessing registers
PID Filtering: accessing registers
Sram destinations: accessing registers
Tuner/Demod: I2C bus
DVB-stuff: can be written for common use
Acknowledgements (just for the rewriting part)
================
Bjarne Steinsbo thought a lot in the first place of the pci part for this code
sharing idea.
Andreas Oberritter for providing a recent PCI initialization template
(pluto2.c).
Boleslaw Ciesielski for pointing out a problem with firmware loader.
Vadim Catana for correcting the USB transfer.
comments, critics and ideas to linux-dvb@linuxtv.org.

View File

@ -17,74 +17,53 @@ Because of this, you need to enable
"Device drivers" => "Multimedia devices"
=> "Video For Linux" => "BT848 Video For Linux"
Furthermore you need to enable
"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
=> "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
2) Loading Modules
==================
In general you need to load the bttv driver, which will handle the gpio and
i2c communication for us. Next you need the common dvb-bt8xx device driver
and one frontend driver.
The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT
CARD ID!
(If you don't get your card running and you suspect that the card id you're
using is wrong, have a look at "bttv-cards.c" for a list of possible card
ids.)
Pay attention to failures when you load the frontend drivers
(e.g. dmesg, /var/log/messages).
i2c communication for us, plus the common dvb-bt8xx device driver.
The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
3a) Nebula / Pinnacle PCTV
--------------------------
$ modprobe bttv i2c_hw=1 card=0x68
$ modprobe dvb-bt8xx
For Nebula cards use the "nxt6000" frontend driver:
$ modprobe nxt6000
$ modprobe bttv (normally bttv is being loaded automatically by kmod)
$ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
For Pinnacle PCTV cards use the "cx24110" frontend driver:
$ modprobe cx24110
3b) TwinHan
-----------
3b) TwinHan and Clones
--------------------------
$ modprobe bttv i2c_hw=1 card=0x71
$ modprobe dvb-bt8xx
$ modprobe dst
The value 0x71 will override the PCI type detection for dvb-bt8xx, which
is necessary for TwinHan cards.#
The value 0x71 will override the PCI type detection for dvb-bt8xx,
which is necessary for TwinHan cards.
If you're having an older card (blue color circuit) and card=0x71 locks your
machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
If you're having an older card (blue color circuit) and card=0x71 locks
your machine, try using 0x68, too. If that does not work, ask on the
mailing list.
The DST module takes a couple of useful parameters, in case the
dst drivers fails to detect your type of card correctly.
The DST module takes a couple of useful parameters.
dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
verbose takes values 0 to 5. These values control the verbosity level.
dst_type_flags takes bit combined values:
1 = new tuner type packets. You can use this if your card is detected
and you have debug and you continually see the tuner packets not
working (make sure not a basic problem like dish alignment etc.)
debug takes values 0 and 1. You can either disable or enable debugging.
2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
breaking up in one half continually, and crc fails a lot, then
this is worth a try (or trying to turn off)
dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
0x20 means it has a Conditional Access slot.
4 = has symdiv. Some cards, mostly without new tuner packets, require
a symbol division algorithm. Doesn't apply to terrestial TV.
You can also specify a value to have the autodetected values turned off
(e.g. 0). The autodected values are determined bythe cards 'response
The autodected values are determined bythe cards 'response
string' which you can see in your logs e.g.
dst_check_ci: recognize DST-MOT
dst_get_device_id: Recognise [DSTMCI]
or
dst_check_ci: unable to recognize DSTXCI or STXCI
--
Authors: Richard Walker, Jamie Honan, Michael Hunold
Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham

219
Documentation/dvb/ci.txt Normal file
View File

@ -0,0 +1,219 @@
* For the user
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: This document describes the usage of the high level CI API as
in accordance to the Linux DVB API. This is a not a documentation for the,
existing low level CI API.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To utilize the High Level CI capabilities,
(1*) This point is valid only for the Twinhan/clones
For the Twinhan/Twinhan clones, the dst_ca module handles the CI
hardware handling.This module is loaded automatically if a CI
(Common Interface, that holds the CAM (Conditional Access Module)
is detected.
(2) one requires a userspace application, ca_zap. This small userland
application is in charge of sending the descrambling related information
to the CAM.
This application requires the following to function properly as of now.
(a) Tune to a valid channel, with szap.
eg: $ szap -c channels.conf -r "TMC" -x
(b) a channels.conf containing a valid PMT PID
eg: TMC:11996:h:0:27500:278:512:650:321
here 278 is a valid PMT PID. the rest of the values are the
same ones that szap uses.
(c) after running a szap, you have to run ca_zap, for the
descrambler to function,
eg: $ ca_zap patched_channels.conf "TMC"
The patched means a patch to apply to scan, such that scan can
generate a channels.conf_with pmt, which has this PMT PID info
(NOTE: szap cannot use this channels.conf with the PMT_PID)
(d) Hopeflly Enjoy your favourite subscribed channel as you do with
a FTA card.
(3) Currently ca_zap, and dst_test, both are meant for demonstration
purposes only, they can become full fledged applications if necessary.
* Cards that fall in this category
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
At present the cards that fall in this category are the Twinhan and it's
clones, these cards are available as VVMER, Tomato, Hercules, Orange and
so on.
* CI modules that are supported
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The CI module support is largely dependant upon the firmware on the cards
Some cards do support almost all of the available CI modules. There is
nothing much that can be done in order to make additional CI modules
working with these cards.
Modules that have been tested by this driver at present are
(1) Irdeto 1 and 2 from SCM
(2) Viaccess from SCM
(3) Dragoncam
* The High level CI API
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* For the programmer
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
With the High Level CI approach any new card with almost any random
architecture can be implemented with this style, the definitions
insidethe switch statement can be easily adapted for any card, thereby
eliminating the need for any additional ioctls.
The disadvantage is that the driver/hardware has to manage the rest. For
the application programmer it would be as simple as sending/receiving an
array to/from the CI ioctls as defined in the Linux DVB API. No changes
have been made in the API to accomodate this feature.
* Why the need for another CI interface ?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is one of the most commonly asked question. Well a nice question.
Strictly speaking this is not a new interface.
The CI interface is defined in the DVB API in ca.h as
typedef struct ca_slot_info {
int num; /* slot number */
int type; /* CA interface this slot supports */
#define CA_CI 1 /* CI high level interface */
#define CA_CI_LINK 2 /* CI link layer level interface */
#define CA_CI_PHYS 4 /* CI physical layer level interface */
#define CA_DESCR 8 /* built-in descrambler */
#define CA_SC 128 /* simple smart card interface */
unsigned int flags;
#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
#define CA_CI_MODULE_READY 2
} ca_slot_info_t;
This CI interface follows the CI high level interface, which is not
implemented by most applications. Hence this area is revisited.
This CI interface is quite different in the case that it tries to
accomodate all other CI based devices, that fall into the other categories
This means that this CI interface handles the EN50221 style tags in the
Application layer only and no session management is taken care of by the
application. The driver/hardware will take care of all that.
This interface is purely an EN50221 interface exchanging APDU's. This
means that no session management, link layer or a transport layer do
exist in this case in the application to driver communication. It is
as simple as that. The driver/hardware has to take care of that.
With this High Level CI interface, the interface can be defined with the
regular ioctls.
All these ioctls are also valid for the High level CI interface
#define CA_RESET _IO('o', 128)
#define CA_GET_CAP _IOR('o', 129, ca_caps_t)
#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t)
#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
#define CA_GET_MSG _IOR('o', 132, ca_msg_t)
#define CA_SEND_MSG _IOW('o', 133, ca_msg_t)
#define CA_SET_DESCR _IOW('o', 134, ca_descr_t)
#define CA_SET_PID _IOW('o', 135, ca_pid_t)
On querying the device, the device yields information thus
CA_GET_SLOT_INFO
----------------------------
Command = [info]
APP: Number=[1]
APP: Type=[1]
APP: flags=[1]
APP: CI High level interface
APP: CA/CI Module Present
CA_GET_CAP
----------------------------
Command = [caps]
APP: Slots=[1]
APP: Type=[1]
APP: Descrambler keys=[16]
APP: Type=[1]
CA_SEND_MSG
----------------------------
Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
Found CA descriptor @ program level
(20) ES type=[2] ES pid=[201] ES length =[0 (0x0)]
(25) ES type=[4] ES pid=[301] ES length =[0 (0x0)]
ca_message length is 25 (0x19) bytes
EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
Not all ioctl's are implemented in the driver from the API, the other
features of the hardware that cannot be implemented by the API are achieved
using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
used to exchange the data to maintain compatibility with other hardware.
/* a message to/from a CI-CAM */
typedef struct ca_msg {
unsigned int index;
unsigned int type;
unsigned int length;
unsigned char msg[256];
} ca_msg_t;
The flow of data can be described thus,
App (User)
-----
parse
|
|
v
en50221 APDU (package)
--------------------------------------
| | | High Level CI driver
| | |
| v |
| en50221 APDU (unpackage) |
| | |
| | |
| v |
| sanity checks |
| | |
| | |
| v |
| do (H/W dep) |
--------------------------------------
| Hardware
|
v
The High Level CI interface uses the EN50221 DVB standard, following a
standard ensures futureproofness.

View File

@ -107,7 +107,7 @@ sub tda10045 {
sub tda10046 {
my $sourcefile = "tt_budget_217g.zip";
my $url = "http://www.technotrend.de/new/217g/$sourcefile";
my $hash = "a25b579e37109af60f4a36c37893957c";
my $hash = "6a7e1e2f2644b162ff0502367553c72d";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@ -115,7 +115,7 @@ sub tda10046 {
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24479, "$tmpdir/fwtmp");
extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24478, "$tmpdir/fwtmp");
verify("$tmpdir/fwtmp", $hash);
copy("$tmpdir/fwtmp", $outfile);

View File

@ -0,0 +1,135 @@
Intel 830M/845G/852GM/855GM/865G/915G Framebuffer driver
================================================================
A. Introduction
This is a framebuffer driver for various Intel 810/815 compatible
graphics devices. These would include:
Intel 830M
Intel 810E845G
Intel 852GM
Intel 855GM
Intel 865G
Intel 915G
B. List of available options
a. "video=intelfb"
enables the intelfb driver
Recommendation: required
b. "mode=<xres>x<yres>[-<bpp>][@<refresh>]"
select mode
Recommendation: user preference
(default = 1024x768-32@70)
c. "vram=<value>"
select amount of system RAM in MB to allocate for the video memory
if not enough RAM was already allocated by the BIOS.
Recommendation: 1 - 4 MB.
(default = 4 MB)
d. "voffset=<value>"
select at what offset in MB of the logical memory to allocate the
framebuffer memory. The intent is to avoid the memory blocks
used by standard graphics applications (XFree86). Depending on your
usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
for the least amount). Note, an arbitrary setting may conflict
with XFree86.
Recommendation: do not set
(default = 48 MB)
e. "accel"
enable text acceleration. This can be enabled/reenabled anytime
by using 'fbset -accel true/false'.
Recommendation: enable
(default = set)
f. "hwcursor"
enable cursor acceleration.
Recommendation: enable
(default = set)
g. "mtrr"
enable MTRR. This allows data transfers to the framebuffer memory
to occur in bursts which can significantly increase performance.
Not very helpful with the intel chips because of 'shared memory'.
Recommendation: set
(default = set)
h. "fixed"
disable mode switching.
Recommendation: do not set
(default = not set)
The binary parameters can be unset with a "no" prefix, example "noaccel".
The default parameter (not named) is the mode.
C. Kernel booting
Separate each option/option-pair by commas (,) and the option from its value
with an equals sign (=) as in the following:
video=i810fb:option1,option2=value2
Sample Usage
------------
In /etc/lilo.conf, add the line:
append="video=intelfb:800x600-32@75,accel,hwcursor,vram=8"
This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
will be enabled.
D. Module options
The module parameters are essentially similar to the kernel
parameters. The main difference is that you need to include a Boolean value
(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
Example, to enable MTRR, include "mtrr=1".
Sample Usage
------------
Using the same setup as described above, load the module like this:
modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
Or just add the following to /etc/modprobe.conf
options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
and just do a
modprobe intelfb
E. Acknowledgment:
1. Geert Uytterhoeven - his excellent howto and the virtual
framebuffer driver code made this possible.
2. Jeff Hartmann for his agpgart code.
3. David Dawes for his original kernel 2.4 code.
4. The X developers. Insights were provided just by reading the
XFree86 source code.
5. Antonino A. Daplas for his inspiring i810fb driver.
6. Andrew Morton for his kernel patches maintenance.
###########################
Sylvain

View File

@ -63,3 +63,33 @@ Why: Outside of Linux, the only implementations of anything even
people, who might be using implementations that I am not aware
of, to adjust to this upcoming change.
Who: Paul E. McKenney <paulmck@us.ibm.com>
---------------------------
What: IEEE1394 Audio and Music Data Transmission Protocol driver,
Connection Management Procedures driver
When: November 2005
Files: drivers/ieee1394/{amdtp,cmp}*
Why: These are incomplete, have never worked, and are better implemented
in userland via raw1394 (see http://freebob.sourceforge.net/ for
example.)
Who: Jody McIntyre <scjody@steamballoon.com>
---------------------------
What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
When: November 2005
Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
more efficient. You should really be using libraw1394 for raw1394
access anyway.
Who: Jody McIntyre <scjody@steamballoon.com>
---------------------------
What: i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid
When: November 2005
Files: drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c
Why: Match the other drivers' name for the same function, duplicate names
will be available until removal of old names.
Who: Grant Coady <gcoady@gmail.com>

View File

@ -26,7 +26,11 @@ Mount options unique to the isofs filesystem.
mode=xxx Sets the permissions on files to xxx
nojoliet Ignore Joliet extensions if they are present.
norock Ignore Rock Ridge extensions if they are present.
unhide Show hidden files.
hide Completely strip hidden files from the file system.
showassoc Show files marked with the 'associated' bit
unhide Deprecated; showing hidden files is now default;
If given, it is a synonym for 'showassoc' which will
recreate previous unhide behavior
session=x Select number of session on multisession CD
sbsector=xxx Session begins from sector xxx

View File

@ -7,7 +7,6 @@ that support it. For example, a given bus might look like this:
|-- 0000:17:00.0
| |-- class
| |-- config
| |-- detach_state
| |-- device
| |-- irq
| |-- local_cpus
@ -19,7 +18,7 @@ that support it. For example, a given bus might look like this:
| |-- subsystem_device
| |-- subsystem_vendor
| `-- vendor
`-- detach_state
`-- ...
The topmost element describes the PCI domain and bus number. In this case,
the domain number is 0000 and the bus number is 17 (both values are in hex).
@ -31,7 +30,6 @@ files, each with their own function.
---- --------
class PCI class (ascii, ro)
config PCI config space (binary, rw)
detach_state connection status (bool, rw)
device PCI device (ascii, ro)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
@ -85,4 +83,4 @@ useful return codes should be provided.
Legacy resources are protected by the HAVE_PCI_LEGACY define. Platforms
wishing to support legacy functionality should define it and provide
pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.

View File

@ -214,7 +214,7 @@ Other notes:
A very simple (and naive) implementation of a device attribute is:
static ssize_t show_name(struct device * dev, char * buf)
static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf,"%s\n",dev->name);
}

View File

@ -71,8 +71,8 @@ can be changed on remount. The size parameter also accepts a suffix %
to limit this tmpfs instance to that percentage of your physical RAM:
the default, when neither size nor nr_blocks is specified, is size=50%
If both nr_blocks (or size) and nr_inodes are set to 0, neither blocks
nor inodes will be limited in that instance. It is generally unwise to
If nr_blocks=0 (or size=0), blocks will not be limited in that instance;
if nr_inodes=0, inodes will not be limited. It is generally unwise to
mount with such options, since it allows any user with write access to
use up all the memory on the machine; but enhances the scalability of
that instance in a system with many cpus making intensive use of it.
@ -97,4 +97,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
Hugh Dickins <hugh@veritas.com>, 01 September 2004
Hugh Dickins <hugh@veritas.com>, 13 March 2005

View File

@ -42,7 +42,7 @@ I suspect that this driver could be made to work for the following SiS
chipsets as well: 635, and 635T. If anyone owns a board with those chips
AND is willing to risk crashing & burning an otherwise well-behaved kernel
in the name of progress... please contact me at <mhoffman@lightlink.com> or
via the project's mailing list: <sensors@stimpy.netroedge.com>. Please
via the project's mailing list: <lm-sensors@lm-sensors.org>. Please
send bug reports and/or success stories as well.

View File

@ -0,0 +1,111 @@
Kernel driver adm1021
=====================
Supported chips:
* Analog Devices ADM1021
Prefix: 'adm1021'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Analog Devices website
* Analog Devices ADM1021A/ADM1023
Prefix: 'adm1023'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Analog Devices website
* Genesys Logic GL523SM
Prefix: 'gl523sm'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet:
* Intel Xeon Processor
Prefix: - any other - may require 'force_adm1021' parameter
Addresses scanned: none
Datasheet: Publicly available at Intel website
* Maxim MAX1617
Prefix: 'max1617'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Maxim website
* Maxim MAX1617A
Prefix: 'max1617a'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Maxim website
* National Semiconductor LM84
Prefix: 'lm84'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the National Semiconductor website
* Philips NE1617
Prefix: 'max1617' (probably detected as a max1617)
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Philips website
* Philips NE1617A
Prefix: 'max1617' (probably detected as a max1617)
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Philips website
* TI THMC10
Prefix: 'thmc10'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the TI website
* Onsemi MC1066
Prefix: 'mc1066'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Onsemi website
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>
Module Parameters
-----------------
* read_only: int
Don't set any values, read only mode
Description
-----------
The chips supported by this driver are very similar. The Maxim MAX1617 is
the oldest; it has the problem that it is not very well detectable. The
MAX1617A solves that. The ADM1021 is a straight clone of the MAX1617A.
Ditto for the THMC10. From here on, we will refer to all these chips as
ADM1021-clones.
The ADM1021 and MAX1617A reports a die code, which is a sort of revision
code. This can help us pinpoint problems; it is not very useful
otherwise.
ADM1021-clones implement two temperature sensors. One of them is internal,
and measures the temperature of the chip itself; the other is external and
is realised in the form of a transistor-like device. A special alarm
indicates whether the remote sensor is connected.
Each sensor has its own low and high limits. When they are crossed, the
corresponding alarm is set and remains on as long as the temperature stays
out of range. Temperatures are measured in degrees Celsius. Measurements
are possible between -65 and +127 degrees, with a resolution of one degree.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may already
have disappeared!
This driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values. It is possible to make
ADM1021-clones do faster measurements, but there is really no good reason
for that.
Xeon support
------------
Some Xeon processors have real max1617, adm1021, or compatible chips
within them, with two temperature sensors.
Other Xeons have chips with only one sensor.
If you have a Xeon, and the adm1021 module loads, and both temperatures
appear valid, then things are good.
If the adm1021 module doesn't load, you should try this:
modprobe adm1021 force_adm1021=BUS,ADDRESS
ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e.
If you have dual Xeons you may have appear to have two separate
adm1021-compatible chips, or two single-temperature sensors, at distinct
addresses.

View File

@ -0,0 +1,51 @@
Kernel driver adm1025
=====================
Supported chips:
* Analog Devices ADM1025, ADM1025A
Prefix: 'adm1025'
Addresses scanned: I2C 0x2c - 0x2e
Datasheet: Publicly available at the Analog Devices website
* Philips NE1619
Prefix: 'ne1619'
Addresses scanned: I2C 0x2c - 0x2d
Datasheet: Publicly available at the Philips website
The NE1619 presents some differences with the original ADM1025:
* Only two possible addresses (0x2c - 0x2d).
* No temperature offset register, but we don't use it anyway.
* No INT mode for pin 16. We don't play with it anyway.
Authors:
Chen-Yuan Wu <gwu@esoft.com>,
Jean Delvare <khali@linux-fr.org>
Description
-----------
(This is from Analog Devices.) The ADM1025 is a complete system hardware
monitor for microprocessor-based systems, providing measurement and limit
comparison of various system parameters. Five voltage measurement inputs
are provided, for monitoring +2.5V, +3.3V, +5V and +12V power supplies and
the processor core voltage. The ADM1025 can monitor a sixth power-supply
voltage by measuring its own VCC. One input (two pins) is dedicated to a
remote temperature-sensing diode and an on-chip temperature sensor allows
ambient temperature to be monitored.
One specificity of this chip is that the pin 11 can be hardwired in two
different manners. It can act as the +12V power-supply voltage analog
input, or as the a fifth digital entry for the VID reading (bit 4). It's
kind of strange since both are useful, and the reason for designing the
chip that way is obscure at least to me. The bit 5 of the configuration
register can be used to define how the chip is hardwired. Please note that
it is not a choice you have to make as the user. The choice was already
made by your motherboard's maker. If the configuration bit isn't set
properly, you'll have a wrong +12V reading or a wrong VID reading. The way
the driver handles that is to preserve this bit through the initialization
process, assuming that the BIOS set it up properly beforehand. If it turns
out not to be true in some cases, we'll provide a module parameter to force
modes.
This driver also supports the ADM1025A, which differs from the ADM1025
only in that it has "open-drain VID inputs while the ADM1025 has on-chip
100k pull-ups on the VID inputs". It doesn't make any difference for us.

View File

@ -0,0 +1,93 @@
Kernel driver adm1026
=====================
Supported chips:
* Analog Devices ADM1026
Prefix: 'adm1026'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/en/prod/0,,766_825_ADM1026,00.html
Authors:
Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing
Justin Thiessen <jthiessen@penguincomputing.com>
Module Parameters
-----------------
* gpio_input: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as inputs
* gpio_output: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as outputs
* gpio_inverted: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as inverted
* gpio_normal: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as normal/non-inverted
* gpio_fan: int array (min = 1, max = 8)
List of GPIO pins (0-7) to program as fan tachs
Description
-----------
This driver implements support for the Analog Devices ADM1026. Analog
Devices calls it a "complete thermal system management controller."
The ADM1026 implements three (3) temperature sensors, 17 voltage sensors,
16 general purpose digital I/O lines, eight (8) fan speed sensors (8-bit),
an analog output and a PWM output along with limit, alarm and mask bits for
all of the above. There is even 8k bytes of EEPROM memory on chip.
Temperatures are measured in degrees Celsius. There are two external
sensor inputs and one internal sensor. Each sensor has a high and low
limit. If the limit is exceeded, an interrupt (#SMBALERT) can be
generated. The interrupts can be masked. In addition, there are over-temp
limits for each sensor. If this limit is exceeded, the #THERM output will
be asserted. The current temperature and limits have a resolution of 1
degree.
Fan rotation speeds are reported in RPM (rotations per minute) but measured
in counts of a 22.5kHz internal clock. Each fan has a high limit which
corresponds to a minimum fan speed. If the limit is exceeded, an interrupt
can be generated. Each fan can be programmed to divide the reference clock
by 1, 2, 4 or 8. Not all RPM values can accurately be represented, so some
rounding is done. With a divider of 8, the slowest measurable speed of a
two pulse per revolution fan is 661 RPM.
There are 17 voltage sensors. An alarm is triggered if the voltage has
crossed a programmable minimum or maximum limit. Note that minimum in this
case always means 'closest to zero'; this is important for negative voltage
measurements. Several inputs have integrated attenuators so they can measure
higher voltages directly. 3.3V, 5V, 12V, -12V and battery voltage all have
dedicated inputs. There are several inputs scaled to 0-3V full-scale range
for SCSI terminator power. The remaining inputs are not scaled and have
a 0-2.5V full-scale range. A 2.5V or 1.82V reference voltage is provided
for negative voltage measurements.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may already
have disappeared! Note that in the current implementation, all hardware
registers are read whenever any data is read (unless it is less than 2.0
seconds since the last update). This means that you can easily miss
once-only alarms.
The ADM1026 measures continuously. Analog inputs are measured about 4
times a second. Fan speed measurement time depends on fan speed and
divisor. It can take as long as 1.5 seconds to measure all fan speeds.
The ADM1026 has the ability to automatically control fan speed based on the
temperature sensor inputs. Both the PWM output and the DAC output can be
used to control fan speed. Usually only one of these two outputs will be
used. Write the minimum PWM or DAC value to the appropriate control
register. Then set the low temperature limit in the tmin values for each
temperature sensor. The range of control is fixed at 20 °C, and the
largest difference between current and tmin of the temperature sensors sets
the control output. See the datasheet for several example circuits for
controlling fan speed with the PWM and DAC outputs. The fan speed sensors
do not have PWM compensation, so it is probably best to control the fan
voltage from the power lead rather than on the ground lead.
The datasheet shows an example application with VID signals attached to
GPIO lines. Unfortunately, the chip may not be connected to the VID lines
in this way. The driver assumes that the chips *is* connected this way to
get a VID voltage.

View File

@ -0,0 +1,35 @@
Kernel driver adm1031
=====================
Supported chips:
* Analog Devices ADM1030
Prefix: 'adm1030'
Addresses scanned: I2C 0x2c to 0x2e
Datasheet: Publicly available at the Analog Devices website
http://products.analog.com/products/info.asp?product=ADM1030
* Analog Devices ADM1031
Prefix: 'adm1031'
Addresses scanned: I2C 0x2c to 0x2e
Datasheet: Publicly available at the Analog Devices website
http://products.analog.com/products/info.asp?product=ADM1031
Authors:
Alexandre d'Alton <alex@alexdalton.org>
Jean Delvare <khali@linux-fr.org>
Description
-----------
The ADM1030 and ADM1031 are digital temperature sensors and fan controllers.
They sense their own temperature as well as the temperature of up to one
(ADM1030) or two (ADM1031) external diodes.
All temperature values are given in degrees Celsius. Resolution is 0.5
degree for the local temperature, 0.125 degree for the remote temperatures.
Each temperature channel has its own high and low limits, plus a critical
limit.
The ADM1030 monitors a single fan speed, while the ADM1031 monitors up to
two. Each fan channel has its own low speed limit.

View File

@ -0,0 +1,177 @@
Kernel driver adm9240
=====================
Supported chips:
* Analog Devices ADM9240
Prefix: 'adm9240'
Addresses scanned: I2C 0x2c - 0x2f
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/UploadedFiles/Data_Sheets/79857778ADM9240_0.pdf
* Dallas Semiconductor DS1780
Prefix: 'ds1780'
Addresses scanned: I2C 0x2c - 0x2f
Datasheet: Publicly available at the Dallas Semiconductor (Maxim) website
http://pdfserv.maxim-ic.com/en/ds/DS1780.pdf
* National Semiconductor LM81
Prefix: 'lm81'
Addresses scanned: I2C 0x2c - 0x2f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/ds.cgi/LM/LM81.pdf
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Michiel Rook <michiel@grendelproject.nl>,
Grant Coady <gcoady@gmail.com> with guidance
from Jean Delvare <khali@linux-fr.org>
Interface
---------
The I2C addresses listed above assume BIOS has not changed the
chip MSB 5-bit address. Each chip reports a unique manufacturer
identification code as well as the chip revision/stepping level.
Description
-----------
[From ADM9240] The ADM9240 is a complete system hardware monitor for
microprocessor-based systems, providing measurement and limit comparison
of up to four power supplies and two processor core voltages, plus
temperature, two fan speeds and chassis intrusion. Measured values can
be read out via an I2C-compatible serial System Management Bus, and values
for limit comparisons can be programmed in over the same serial bus. The
high speed successive approximation ADC allows frequent sampling of all
analog channels to ensure a fast interrupt response to any out-of-limit
measurement.
The ADM9240, DS1780 and LM81 are register compatible, the following
details are common to the three chips. Chip differences are described
after this section.
Measurements
------------
The measurement cycle
The adm9240 driver will take a measurement reading no faster than once
each two seconds. User-space may read sysfs interface faster than the
measurement update rate and will receive cached data from the most
recent measurement.
ADM9240 has a very fast 320us temperature and voltage measurement cycle
with independent fan speed measurement cycles counting alternating rising
edges of the fan tacho inputs.
DS1780 measurement cycle is about once per second including fan speed.
LM81 measurement cycle is about once per 400ms including fan speed.
The LM81 12-bit extended temperature measurement mode is not supported.
Temperature
-----------
On chip temperature is reported as degrees Celsius as 9-bit signed data
with resolution of 0.5 degrees Celsius. High and low temperature limits
are 8-bit signed data with resolution of one degree Celsius.
Temperature alarm is asserted once the temperature exceeds the high limit,
and is cleared when the temperature falls below the temp1_max_hyst value.
Fan Speed
---------
Two fan tacho inputs are provided, the ADM9240 gates an internal 22.5kHz
clock via a divider to an 8-bit counter. Fan speed (rpm) is calculated by:
rpm = (22500 * 60) / (count * divider)
Automatic fan clock divider
* User sets 0 to fan_min limit
- low speed alarm is disabled
- fan clock divider not changed
- auto fan clock adjuster enabled for valid fan speed reading
* User sets fan_min limit too low
- low speed alarm is enabled
- fan clock divider set to max
- fan_min set to register value 254 which corresponds
to 664 rpm on adm9240
- low speed alarm will be asserted if fan speed is
less than minimum measurable speed
- auto fan clock adjuster disabled
* User sets reasonable fan speed
- low speed alarm is enabled
- fan clock divider set to suit fan_min
- auto fan clock adjuster enabled: adjusts fan_min
* User sets unreasonably high low fan speed limit
- resolution of the low speed limit may be reduced
- alarm will be asserted
- auto fan clock adjuster enabled: adjusts fan_min
* fan speed may be displayed as zero until the auto fan clock divider
adjuster brings fan speed clock divider back into chip measurement
range, this will occur within a few measurement cycles.
Analog Output
-------------
An analog output provides a 0 to 1.25 volt signal intended for an external
fan speed amplifier circuit. The analog output is set to maximum value on
power up or reset. This doesn't do much on the test Intel SE440BX-2.
Voltage Monitor
Voltage (IN) measurement is internally scaled:
nr label nominal maximum resolution
mV mV mV
0 +2.5V 2500 3320 13.0
1 Vccp1 2700 3600 14.1
2 +3.3V 3300 4380 17.2
3 +5V 5000 6640 26.0
4 +12V 12000 15940 62.5
5 Vccp2 2700 3600 14.1
The reading is an unsigned 8-bit value, nominal voltage measurement is
represented by a reading of 192, being 3/4 of the measurement range.
An alarm is asserted for any voltage going below or above the set limits.
The driver reports and accepts voltage limits scaled to the above table.
VID Monitor
-----------
The chip has five inputs to read the 5-bit VID and reports the mV value
based on detected CPU type.
Chassis Intrusion
-----------------
An alarm is asserted when the CI pin goes active high. The ADM9240
Datasheet has an example of an external temperature sensor driving
this pin. On an Intel SE440BX-2 the Chassis Intrusion header is
connected to a normally open switch.
The ADM9240 provides an internal open drain on this line, and may output
a 20 ms active low pulse to reset an external Chassis Intrusion latch.
Clear the CI latch by writing value 1 to the sysfs chassis_clear file.
Alarm flags reported as 16-bit word
bit label comment
--- ------------- --------------------------
0 +2.5 V_Error high or low limit exceeded
1 VCCP_Error high or low limit exceeded
2 +3.3 V_Error high or low limit exceeded
3 +5 V_Error high or low limit exceeded
4 Temp_Error temperature error
6 FAN1_Error fan low limit exceeded
7 FAN2_Error fan low limit exceeded
8 +12 V_Error high or low limit exceeded
9 VCCP2_Error high or low limit exceeded
12 Chassis_Error CI pin went high
Remaining bits are reserved and thus undefined. It is important to note
that alarm bits may be cleared on read, user-space may latch alarms and
provide the end-user with a method to clear alarm memory.

View File

@ -0,0 +1,72 @@
Kernel driver asb100
====================
Supported Chips:
* Asus ASB100 and ASB100-A "Bach"
Prefix: 'asb100'
Addresses scanned: I2C 0x2d
Datasheet: none released
Author: Mark M. Hoffman <mhoffman@lightlink.com>
Description
-----------
This driver implements support for the Asus ASB100 and ASB100-A "Bach".
These are custom ASICs available only on Asus mainboards. Asus refuses to
supply a datasheet for these chips. Thanks go to many people who helped
investigate their hardware, including:
Vitaly V. Bursov
Alexander van Kaam (author of MBM for Windows)
Bertrik Sikken
The ASB100 implements seven voltage sensors, three fan rotation speed
sensors, four temperature sensors, VID lines and alarms. In addition to
these, the ASB100-A also implements a single PWM controller for fans 2 and
3 (i.e. one setting controls both.) If you have a plain ASB100, the PWM
controller will simply not work (or maybe it will for you... it doesn't for
me).
Temperatures are measured and reported in degrees Celsius.
Fan speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit.
Voltage sensors (also known as IN sensors) report values in volts.
The VID lines encode the core voltage value: the voltage level your
processor should work with. This is hardcoded by the mainboard and/or
processor itself. It is a value in volts.
Alarms: (TODO question marks indicate may or may not work)
0x0001 => in0 (?)
0x0002 => in1 (?)
0x0004 => in2
0x0008 => in3
0x0010 => temp1 (1)
0x0020 => temp2
0x0040 => fan1
0x0080 => fan2
0x0100 => in4
0x0200 => in5 (?) (2)
0x0400 => in6 (?) (2)
0x0800 => fan3
0x1000 => chassis switch
0x2000 => temp3
Alarm Notes:
(1) This alarm will only trigger if the hysteresis value is 127C.
I.e. it behaves the same as w83781d.
(2) The min and max registers for these values appear to
be read-only or otherwise stuck at 0x00.
TODO:
* Experiment with fan divisors > 8.
* Experiment with temp. sensor types.
* Are there really 13 voltage inputs? Probably not...
* Cleanups, no doubt...

View File

@ -0,0 +1,108 @@
Kernel driver ds1621
====================
Supported chips:
* Dallas Semiconductor DS1621
Prefix: 'ds1621'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the Dallas Semiconductor website
http://www.dalsemi.com/
* Dallas Semiconductor DS1625
Prefix: 'ds1621'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the Dallas Semiconductor website
http://www.dalsemi.com/
Authors:
Christian W. Zuckschwerdt <zany@triq.net>
valuable contributions by Jan M. Sendler <sendler@sendler.de>
ported to 2.6 by Aurelien Jarno <aurelien@aurel32.net>
with the help of Jean Delvare <khali@linux-fr.org>
Module Parameters
------------------
* polarity int
Output's polarity: 0 = active high, 1 = active low
Description
-----------
The DS1621 is a (one instance) digital thermometer and thermostat. It has
both high and low temperature limits which can be user defined (i.e.
programmed into non-volatile on-chip registers). Temperature range is -55
degree Celsius to +125 in 0.5 increments. You may convert this into a
Fahrenheit range of -67 to +257 degrees with 0.9 steps. If polarity
parameter is not provided, original value is used.
As for the thermostat, behavior can also be programmed using the polarity
toggle. On the one hand ("heater"), the thermostat output of the chip,
Tout, will trigger when the low limit temperature is met or underrun and
stays high until the high limit is met or exceeded. On the other hand
("cooler"), vice versa. That way "heater" equals "active low", whereas
"conditioner" equals "active high". Please note that the DS1621 data sheet
is somewhat misleading in this point since setting the polarity bit does
not simply invert Tout.
A second thing is that, during extensive testing, Tout showed a tolerance
of up to +/- 0.5 degrees even when compared against precise temperature
readings. Be sure to have a high vs. low temperature limit gap of al least
1.0 degree Celsius to avoid Tout "bouncing", though!
As for alarms, you can read the alarm status of the DS1621 via the 'alarms'
/sys file interface. The result consists mainly of bit 6 and 5 of the
configuration register of the chip; bit 6 (0x40 or 64) is the high alarm
bit and bit 5 (0x20 or 32) the low one. These bits are set when the high or
low limits are met or exceeded and are reset by the module as soon as the
respective temperature ranges are left.
The alarm registers are in no way suitable to find out about the actual
status of Tout. They will only tell you about its history, whether or not
any of the limits have ever been met or exceeded since last power-up or
reset. Be aware: When testing, it showed that the status of Tout can change
with neither of the alarms set.
Temperature conversion of the DS1621 takes up to 1000ms; internal access to
non-volatile registers may last for 10ms or below.
High Accuracy Temperature Reading
---------------------------------
As said before, the temperature issued via the 9-bit i2c-bus data is
somewhat arbitrary. Internally, the temperature conversion is of a
different kind that is explained (not so...) well in the DS1621 data sheet.
To cut the long story short: Inside the DS1621 there are two oscillators,
both of them biassed by a temperature coefficient.
Higher resolution of the temperature reading can be achieved using the
internal projection, which means taking account of REG_COUNT and REG_SLOPE
(the driver manages them):
Taken from Dallas Semiconductors App Note 068: 'Increasing Temperature
Resolution on the DS1620' and App Note 105: 'High Resolution Temperature
Measurement with Dallas Direct-to-Digital Temperature Sensors'
- Read the 9-bit temperature and strip the LSB (Truncate the .5 degs)
- The resulting value is TEMP_READ.
- Then, read REG_COUNT.
- And then, REG_SLOPE.
TEMP = TEMP_READ - 0.25 + ((REG_SLOPE - REG_COUNT) / REG_SLOPE)
Note that this is what the DONE bit in the DS1621 configuration register is
good for: Internally, one temperature conversion takes up to 1000ms. Before
that conversion is complete you will not be able to read valid things out
of REG_COUNT and REG_SLOPE. The DONE bit, as you may have guessed by now,
tells you whether the conversion is complete ("done", in plain English) and
thus, whether the values you read are good or not.
The DS1621 has two modes of operation: "Continuous" conversion, which can
be understood as the default stand-alone mode where the chip gets the
temperature and controls external devices via its Tout pin or tells other
i2c's about it if they care. The other mode is called "1SHOT", that means
that it only figures out about the temperature when it is explicitly told
to do so; this can be seen as power saving mode.
Now if you want to read REG_COUNT and REG_SLOPE, you have to either stop
the continuous conversions until the contents of these registers are valid,
or, in 1SHOT mode, you have to have one conversion made.

View File

@ -0,0 +1,96 @@
Kernel driver eeprom
====================
Supported chips:
* Any EEPROM chip in the designated address range
Prefix: 'eeprom'
Addresses scanned: I2C 0x50 - 0x57
Datasheets: Publicly available from:
Atmel (www.atmel.com),
Catalyst (www.catsemi.com),
Fairchild (www.fairchildsemi.com),
Microchip (www.microchip.com),
Philips (www.semiconductor.philips.com),
Rohm (www.rohm.com),
ST (www.st.com),
Xicor (www.xicor.com),
and others.
Chip Size (bits) Address
24C01 1K 0x50 (shadows at 0x51 - 0x57)
24C01A 1K 0x50 - 0x57 (Typical device on DIMMs)
24C02 2K 0x50 - 0x57
24C04 4K 0x50, 0x52, 0x54, 0x56
(additional data at 0x51, 0x53, 0x55, 0x57)
24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52,
0x53, 0x55, 0x56, 0x57)
24C16 16K 0x50 (additional data at 0x51 - 0x57)
Sony 2K 0x57
Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37
Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37
Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37
Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37
Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37
ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Jean Delvare <khali@linux-fr.org>,
Greg Kroah-Hartman <greg@kroah.com>,
IBM Corp.
Description
-----------
This is a simple EEPROM module meant to enable reading the first 256 bytes
of an EEPROM (on a SDRAM DIMM for example). However, it will access serial
EEPROMs on any I2C adapter. The supported devices are generically called
24Cxx, and are listed above; however the numbering for these
industry-standard devices may vary by manufacturer.
This module was a programming exercise to get used to the new project
organization laid out by Frodo, but it should be at least completely
effective for decoding the contents of EEPROMs on DIMMs.
DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants.
The other devices will not be found on a DIMM because they respond to more
than one address.
DDC Monitors may contain any device. Often a 24C01, which responds to all 8
addresses, is found.
Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the
specification, so it is guess work and far from being complete.
The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional
software write protect register at 0x30 - 0x37 (0x20 less than the memory
location). The chip responds to "write quick" detection at this address but
does not respond to byte reads. If this register is present, the lower 128
bytes of the memory array are not write protected. Any byte data write to
this address will write protect the memory array permanently, and the
device will no longer respond at the 0x30-37 address. The eeprom driver
does not support this register.
Lacking functionality:
* Full support for larger devices (24C04, 24C08, 24C16). These are not
typically found on a PC. These devices will appear as separate devices at
multiple addresses.
* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512).
These devices require two-byte address fields and are not supported.
* Enable Writing. Again, no technical reason why not, but making it easy
to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
to disable the DIMMs (potentially preventing the computer from booting)
until the values are restored somehow.
Use:
After inserting the module (and any other required SMBus/i2c modules), you
should have some EEPROM directories in /sys/bus/i2c/devices/* of names such
as "0-0050". Inside each of these is a series of files, the eeprom file
contains the binary data from EEPROM.

View File

@ -0,0 +1,169 @@
Kernel driver fscher
====================
Supported chips:
* Fujitsu-Siemens Hermes chip
Prefix: 'fscher'
Addresses scanned: I2C 0x73
Authors:
Reinhard Nissl <rnissl@gmx.de> based on work
from Hermann Jung <hej@odn.de>,
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>
Description
-----------
This driver implements support for the Fujitsu-Siemens Hermes chip. It is
described in the 'Register Set Specification BMC Hermes based Systemboard'
from Fujitsu-Siemens.
The Hermes chip implements a hardware-based system management, e.g. for
controlling fan speed and core voltage. There is also a watchdog counter on
the chip which can trigger an alarm and even shut the system down.
The chip provides three temperature values (CPU, motherboard and
auxiliary), three voltage values (+12V, +5V and battery) and three fans
(power supply, CPU and auxiliary).
Temperatures are measured in degrees Celsius. The resolution is 1 degree.
Fan rotation speeds are reported in RPM (rotations per minute). The value
can be divided by a programmable divider (1, 2 or 4) which is stored on
the chip.
Voltage sensors (also known as "in" sensors) report their values in volts.
All values are reported as final values from the driver. There is no need
for further calculations.
Detailed description
--------------------
Below you'll find a single line description of all the bit values. With
this information, you're able to decode e. g. alarms, wdog, etc. To make
use of the watchdog, you'll need to set the watchdog time and enable the
watchdog. After that it is necessary to restart the watchdog time within
the specified period of time, or a system reset will occur.
* revision
READING & 0xff = 0x??: HERMES revision identification
* alarms
READING & 0x80 = 0x80: CPU throttling active
READING & 0x80 = 0x00: CPU running at full speed
READING & 0x10 = 0x10: software event (see control:1)
READING & 0x10 = 0x00: no software event
READING & 0x08 = 0x08: watchdog event (see wdog:2)
READING & 0x08 = 0x00: no watchdog event
READING & 0x02 = 0x02: thermal event (see temp*:1)
READING & 0x02 = 0x00: no thermal event
READING & 0x01 = 0x01: fan event (see fan*:1)
READING & 0x01 = 0x00: no fan event
READING & 0x13 ! 0x00: ALERT LED is flashing
* control
READING & 0x01 = 0x01: software event
READING & 0x01 = 0x00: no software event
WRITING & 0x01 = 0x01: set software event
WRITING & 0x01 = 0x00: clear software event
* watchdog_control
READING & 0x80 = 0x80: power off on watchdog event while thermal event
READING & 0x80 = 0x00: watchdog power off disabled (just system reset enabled)
READING & 0x40 = 0x40: watchdog timebase 60 seconds (see also wdog:1)
READING & 0x40 = 0x00: watchdog timebase 2 seconds
READING & 0x10 = 0x10: watchdog enabled
READING & 0x10 = 0x00: watchdog disabled
WRITING & 0x80 = 0x80: enable "power off on watchdog event while thermal event"
WRITING & 0x80 = 0x00: disable "power off on watchdog event while thermal event"
WRITING & 0x40 = 0x40: set watchdog timebase to 60 seconds
WRITING & 0x40 = 0x00: set watchdog timebase to 2 seconds
WRITING & 0x20 = 0x20: disable watchdog
WRITING & 0x10 = 0x10: enable watchdog / restart watchdog time
* watchdog_state
READING & 0x02 = 0x02: watchdog system reset occurred
READING & 0x02 = 0x00: no watchdog system reset occurred
WRITING & 0x02 = 0x02: clear watchdog event
* watchdog_preset
READING & 0xff = 0x??: configured watch dog time in units (see wdog:3 0x40)
WRITING & 0xff = 0x??: configure watch dog time in units
* in* (0: +5V, 1: +12V, 2: onboard 3V battery)
READING: actual voltage value
* temp*_status (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
READING & 0x02 = 0x02: thermal event (overtemperature)
READING & 0x02 = 0x00: no thermal event
READING & 0x01 = 0x01: sensor is working
READING & 0x01 = 0x00: sensor is faulty
WRITING & 0x02 = 0x02: clear thermal event
* temp*_input (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
READING: actual temperature value
* fan*_status (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
READING & 0x04 = 0x04: fan event (fan fault)
READING & 0x04 = 0x00: no fan event
WRITING & 0x04 = 0x04: clear fan event
* fan*_div (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
Divisors 2,4 and 8 are supported, both for reading and writing
* fan*_pwm (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
READING & 0xff = 0x00: fan may be switched off
READING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
READING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
READING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
WRITING & 0xff = 0x00: fan may be switched off
WRITING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
WRITING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
WRITING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
* fan*_input (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
READING: actual RPM value
Limitations
-----------
* Measuring fan speed
It seems that the chip counts "ripples" (typical fans produce 2 ripples per
rotation while VERAX fans produce 18) in a 9-bit register. This register is
read out every second, then the ripple prescaler (2, 4 or 8) is applied and
the result is stored in the 8 bit output register. Due to the limitation of
the counting register to 9 bits, it is impossible to measure a VERAX fan
properly (even with a prescaler of 8). At its maximum speed of 3500 RPM the
fan produces 1080 ripples per second which causes the counting register to
overflow twice, leading to only 186 RPM.
* Measuring input voltages
in2 ("battery") reports the voltage of the onboard lithium battery and not
+3.3V from the power supply.
* Undocumented features
Fujitsu-Siemens Computers has not documented all features of the chip so
far. Their software, System Guard, shows that there are a still some
features which cannot be controlled by this implementation.

View File

@ -0,0 +1,74 @@
Kernel driver gl518sm
=====================
Supported chips:
* Genesys Logic GL518SM release 0x00
Prefix: 'gl518sm'
Addresses scanned: I2C 0x2c and 0x2d
Datasheet: http://www.genesyslogic.com/pdf
* Genesys Logic GL518SM release 0x80
Prefix: 'gl518sm'
Addresses scanned: I2C 0x2c and 0x2d
Datasheet: http://www.genesyslogic.com/pdf
Authors:
Frodo Looijaard <frodol@dds.nl>,
Kyösti Mälkki <kmalkki@cc.hut.fi>
Hong-Gunn Chew <hglinux@gunnet.org>
Jean Delvare <khali@linux-fr.org>
Description
-----------
IMPORTANT:
For the revision 0x00 chip, the in0, in1, and in2 values (+5V, +3V,
and +12V) CANNOT be read. This is a limitation of the chip, not the driver.
This driver supports the Genesys Logic GL518SM chip. There are at least
two revision of this chip, which we call revision 0x00 and 0x80. Revision
0x80 chips support the reading of all voltages and revision 0x00 only
for VIN3.
The GL518SM implements one temperature sensor, two fan rotation speed
sensors, and four voltage sensors. It can report alarms through the
computer speakers.
Temperatures are measured in degrees Celsius. An alarm goes off while the
temperature is above the over temperature limit, and has not yet dropped
below the hysteresis limit. The alarm always reflects the current
situation. Measurements are guaranteed between -10 degrees and +110
degrees, with a accuracy of +/-3 degrees.
Rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. In
case when you have selected to turn fan1 off, no fan1 alarm is triggered.
Fan readings can be divided by a programmable divider (1, 2, 4 or 8) to
give the readings more range or accuracy. Not all RPM values can
accurately be represented, so some rounding is done. With a divider
of 2, the lowest representable value is around 1900 RPM.
Voltage sensors (also known as VIN sensors) report their values in volts.
An alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. The VDD input
measures voltages between 0.000 and 5.865 volt, with a resolution of 0.023
volt. The other inputs measure voltages between 0.000 and 4.845 volt, with
a resolution of 0.019 volt. Note that revision 0x00 chips do not support
reading the current voltage of any input except for VIN3; limit setting and
alarms work fine, though.
When an alarm is triggered, you can be warned by a beeping signal through your
computer speaker. It is possible to enable all beeping globally, or only the
beeping for some alarms.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once (except for temperature alarms). This means that the
cause for the alarm may already have disappeared! Note that in the current
implementation, all hardware registers are read whenever any data is read
(unless it is less than 1.5 seconds since the last update). This means that
you can easily miss once-only alarms.
The GL518SM only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.

View File

@ -0,0 +1,96 @@
Kernel driver it87
==================
Supported chips:
* IT8705F
Prefix: 'it87'
Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
Addresses scanned: I2C 0x28 - 0x2f
from Super I/O config space, or default ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* SiS950 [clone of IT8705F]
Prefix: 'sis950'
Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
Datasheet: No longer be available
Author: Christophe Gauthron <chrisg@0-in.com>
Module Parameters
-----------------
* update_vbat: int
0 if vbat should report power on value, 1 if vbat should be updated after
each read. Default is 0. On some boards the battery voltage is provided
by either the battery or the onboard power supply. Only the first reading
at power on will be the actual battery voltage (which the chip does
automatically). On other boards the battery voltage is always fed to
the chip so can be read at any time. Excessive reading may decrease
battery life but no information is given in the datasheet.
* fix_pwm_polarity int
Force PWM polarity to active high (DANGEROUS). Some chips are
misconfigured by BIOS - PWM values would be inverted. This option tries
to fix this. Please contact your BIOS manufacturer and ask him for fix.
Description
-----------
This driver implements support for the IT8705F, IT8712F and SiS950 chips.
This driver also supports IT8712F, which adds SMBus access, and a VID
input, used to report the Vcore voltage of the Pentium processor.
The IT8712F additionally features VID inputs.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
include an 'environment controller' with 3 temperature sensors, 3 fan
rotation speed sensors, 8 voltage sensors, and associated alarms.
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give the
readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in volts. An
alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 4.08 volts, with a resolution of
0.016 volt. The battery voltage in8 does not have limit registers.
The VID lines (IT8712F only) encode the core voltage value: the voltage
level your processor should work with. This is hardcoded by the mainboard
and/or processor itself. It is a value in volts.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may already
have disappeared! Note that in the current implementation, all hardware
registers are read whenever any data is read (unless it is less than 1.5
seconds since the last update). This means that you can easily miss
once-only alarms.
The IT87xx only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
To change sensor N to a thermistor, 'echo 2 > tempN_type' where N is 1, 2,
or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
Give 0 for unused sensor. Any other value is invalid. To configure this at
startup, consult lm_sensors's /etc/sensors.conf. (2 = thermistor;
3 = thermal diode)
The fan speed control features are limited to manual PWM mode. Automatic
"Smart Guardian" mode control handling is not implemented. However
if you want to go for "manual mode" just write 1 to pwmN_enable.

View File

@ -0,0 +1,57 @@
Kernel driver lm63
==================
Supported chips:
* National Semiconductor LM63
Prefix: 'lm63'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM63.html
Author: Jean Delvare <khali@linux-fr.org>
Thanks go to Tyan and especially Alex Buckingham for setting up a remote
access to their S4882 test platform for this driver.
http://www.tyan.com/
Description
-----------
The LM63 is a digital temperature sensor with integrated fan monitoring
and control.
The LM63 is basically an LM86 with fan speed monitoring and control
capabilities added. It misses some of the LM86 features though:
- No low limit for local temperature.
- No critical limit for local temperature.
- Critical limit for remote temperature can be changed only once. We
will consider that the critical limit is read-only.
The datasheet isn't very clear about what the tachometer reading is.
An explanation from National Semiconductor: The two lower bits of the read
value have to be masked out. The value is still 16 bit in width.
All temperature values are given in degrees Celsius. Resolution is 1.0
degree for the local temperature, 0.125 degree for the remote temperature.
The fan speed is measured using a tachometer. Contrary to most chips which
store the value in an 8-bit register and have a selectable clock divider
to make sure that the result will fit in the register, the LM63 uses 16-bit
value for measuring the speed of the fan. It can measure fan speeds down to
83 RPM, at least in theory.
Note that the pin used for fan monitoring is shared with an alert out
function. Depending on how the board designer wanted to use the chip, fan
speed monitoring will or will not be possible. The proper chip configuration
is left to the BIOS, and the driver will blindly trust it.
A PWM output can be used to control the speed of the fan. The LM63 has two
PWM modes: manual and automatic. Automatic mode is not fully implemented yet
(you cannot define your custom PWM/temperature curve), and mode change isn't
supported either.
The lm63 driver will not update its values more frequently than every
second; reading them more often will do no harm, but will return 'old'
values.

View File

@ -0,0 +1,65 @@
Kernel driver lm75
==================
Supported chips:
* National Semiconductor LM75
Prefix: 'lm75'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* Dallas Semiconductor DS75
Prefix: 'lm75'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the Dallas Semiconductor website
http://www.maxim-ic.com/
* Dallas Semiconductor DS1775
Prefix: 'lm75'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the Dallas Semiconductor website
http://www.maxim-ic.com/
* Maxim MAX6625, MAX6626
Prefix: 'lm75'
Addresses scanned: I2C 0x48 - 0x4b
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
* Microchip (TelCom) TCN75
Prefix: 'lm75'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/
Author: Frodo Looijaard <frodol@dds.nl>
Description
-----------
The LM75 implements one temperature sensor. Limits can be set through the
Overtemperature Shutdown register and Hysteresis register. Each value can be
set and read to half-degree accuracy.
An alarm is issued (usually to a connected LM78) when the temperature
gets higher then the Overtemperature Shutdown value; it stays on until
the temperature falls below the Hysteresis value.
All temperatures are in degrees Celsius, and are guaranteed within a
range of -55 to +125 degrees.
The LM75 only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
The LM75 is usually used in combination with LM78-like chips, to measure
the temperature of the processor(s).
The DS75, DS1775, MAX6625, and MAX6626 are supported as well.
They are not distinguished from an LM75. While most of these chips
have three additional bits of accuracy (12 vs. 9 for the LM75),
the additional bits are not supported. Not only that, but these chips will
not be detected if not in 9-bit precision mode (use the force parameter if
needed).
The TCN75 is supported as well, and is not distinguished from an LM75.
The LM75 is essentially an industry standard; there may be other
LM75 clones not listed here, with or without various enhancements,
that are supported.
The LM77 is not supported, contrary to what we pretended for a long time.
Both chips are simply not compatible, value encoding differs.

View File

@ -0,0 +1,22 @@
Kernel driver lm77
==================
Supported chips:
* National Semiconductor LM77
Prefix: 'lm77'
Addresses scanned: I2C 0x48 - 0x4b
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
Author: Andras BALI <drewie@freemail.hu>
Description
-----------
The LM77 implements one temperature sensor. The temperature
sensor incorporates a band-gap type temperature sensor,
10-bit ADC, and a digital comparator with user-programmable upper
and lower limit values.
Limits can be set through the Overtemperature Shutdown register and
Hysteresis register.

View File

@ -0,0 +1,82 @@
Kernel driver lm78
==================
Supported chips:
* National Semiconductor LM78
Prefix: 'lm78'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* National Semiconductor LM78-J
Prefix: 'lm78-j'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* National Semiconductor LM79
Prefix: 'lm79'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
Author: Frodo Looijaard <frodol@dds.nl>
Description
-----------
This driver implements support for the National Semiconductor LM78, LM78-J
and LM79. They are described as 'Microprocessor System Hardware Monitors'.
There is almost no difference between the three supported chips. Functionally,
the LM78 and LM78-J are exactly identical. The LM79 has one more VID line,
which is used to report the lower voltages newer Pentium processors use.
From here on, LM7* means either of these three types.
The LM7* implements one temperature sensor, three fan rotation speed sensors,
seven voltage sensors, VID lines, alarms, and some miscellaneous stuff.
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed; it is triggered again
as soon as it drops below the Hysteresis value. A more useful behavior
can be found by setting the Hysteresis value to +127 degrees Celsius; in
this case, alarms are issued during all the time when the actual temperature
is above the Overtemperature Shutdown value. Measurements are guaranteed
between -55 and +125 degrees, with a resolution of 1 degree.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
the readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in volts.
An alarm is triggered if the voltage has crossed a programmable minimum
or maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 4.08 volts, with a resolution
of 0.016 volt.
The VID lines encode the core voltage value: the voltage level your processor
should work with. This is hardcoded by the mainboard and/or processor itself.
It is a value in volts. When it is unconnected, you will often find the
value 3.50 V here.
In addition to the alarms described above, there are a couple of additional
ones. There is a BTI alarm, which gets triggered when an external chip has
crossed its limits. Usually, this is connected to all LM75 chips; if at
least one crosses its limits, this bit gets set. The CHAS alarm triggers
if your computer case is open. The FIFO alarms should never trigger; it
indicates an internal error. The SMI_IN alarm indicates some other chip
has triggered an SMI interrupt. As we do not use SMI interrupts at all,
this condition usually indicates there is a problem with some other
device.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
hardware registers are read whenever any data is read (unless it is less
than 1.5 seconds since the last update). This means that you can easily
miss once-only alarms.
The LM7* only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.

View File

@ -0,0 +1,56 @@
Kernel driver lm80
==================
Supported chips:
* National Semiconductor LM80
Prefix: 'lm80'
Addresses scanned: I2C 0x28 - 0x2f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>
Description
-----------
This driver implements support for the National Semiconductor LM80.
It is described as a 'Serial Interface ACPI-Compatible Microprocessor
System Hardware Monitor'.
The LM80 implements one temperature sensor, two fan rotation speed sensors,
seven voltage sensors, alarms, and some miscellaneous stuff.
Temperatures are measured in degrees Celsius. There are two sets of limits
which operate independently. When the HOT Temperature Limit is crossed,
this will cause an alarm that will be reasserted until the temperature
drops below the HOT Hysteresis. The Overtemperature Shutdown (OS) limits
should work in the same way (but this must be checked; the datasheet
is unclear about this). Measurements are guaranteed between -55 and
+125 degrees. The current temperature measurement has a resolution of
0.0625 degrees; the limits have a resolution of 1 degree.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
the readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in volts.
An alarm is triggered if the voltage has crossed a programmable minimum
or maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 2.55 volts, with a resolution
of 0.01 volt.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
hardware registers are read whenever any data is read (unless it is less
than 2.0 seconds since the last update). This means that you can easily
miss once-only alarms.
The LM80 only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.

View File

@ -0,0 +1,76 @@
Kernel driver lm83
==================
Supported chips:
* National Semiconductor LM83
Prefix: 'lm83'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM83.html
Author: Jean Delvare <khali@linux-fr.org>
Description
-----------
The LM83 is a digital temperature sensor. It senses its own temperature as
well as the temperature of up to three external diodes. It is compatible
with many other devices such as the LM84 and all other ADM1021 clones.
The main difference between the LM83 and the LM84 in that the later can
only sense the temperature of one external diode.
Using the adm1021 driver for a LM83 should work, but only two temperatures
will be reported instead of four.
The LM83 is only found on a handful of motherboards. Both a confirmed
list and an unconfirmed list follow. If you can confirm or infirm the
fact that any of these motherboards do actually have an LM83, please
contact us. Note that the LM90 can easily be misdetected as a LM83.
Confirmed motherboards:
SBS P014
Unconfirmed motherboards:
Gigabyte GA-8IK1100
Iwill MPX2
Soltek SL-75DRV5
The driver has been successfully tested by Magnus Forsström, who I'd
like to thank here. More testers will be of course welcome.
The fact that the LM83 is only scarcely used can be easily explained.
Most motherboards come with more than just temperature sensors for
health monitoring. They also have voltage and fan rotation speed
sensors. This means that temperature-only chips are usually used as
secondary chips coupled with another chip such as an IT8705F or similar
chip, which provides more features. Since systems usually need three
temperature sensors (motherboard, processor, power supply) and primary
chips provide some temperature sensors, the secondary chip, if needed,
won't have to handle more than two temperatures. Thus, ADM1021 clones
are sufficient, and there is no need for a four temperatures sensor
chip such as the LM83. The only case where using an LM83 would make
sense is on SMP systems, such as the above-mentioned Iwill MPX2,
because you want an additional temperature sensor for each additional
CPU.
On the SBS P014, this is different, since the LM83 is the only hardware
monitoring chipset. One temperature sensor is used for the motherboard
(actually measuring the LM83's own temperature), one is used for the
CPU. The two other sensors must be used to measure the temperature of
two other points of the motherboard. We suspect these points to be the
north and south bridges, but this couldn't be confirmed.
All temperature values are given in degrees Celsius. Local temperature
is given within a range of 0 to +85 degrees. Remote temperatures are
given within a range of 0 to +125 degrees. Resolution is 1.0 degree,
accuracy is guaranteed to 3.0 degrees (see the datasheet for more
details).
Each sensor has its own high limit, but the critical limit is common to
all four sensors. There is no hysteresis mechanism as found on most
recent temperature sensors.
The lm83 driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.

View File

@ -0,0 +1,221 @@
Kernel driver lm85
==================
Supported chips:
* National Semiconductor LM85 (B and C versions)
Prefix: 'lm85'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.national.com/pf/LM/LM85.html
* Analog Devices ADM1027
Prefix: 'adm1027'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.analog.com/en/prod/0,,766_825_ADM1027,00.html
* Analog Devices ADT7463
Prefix: 'adt7463'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.analog.com/en/prod/0,,766_825_ADT7463,00.html
* SMSC EMC6D100, SMSC EMC6D101
Prefix: 'emc6d100'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.smsc.com/main/tools/discontinued/6d100.pdf
* SMSC EMC6D102
Prefix: 'emc6d102'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.smsc.com/main/catalog/emc6d102.html
Authors:
Philip Pokorny <ppokorny@penguincomputing.com>,
Frodo Looijaard <frodol@dds.nl>,
Richard Barrington <rich_b_nz@clear.net.nz>,
Margit Schubert-While <margitsw@t-online.de>,
Justin Thiessen <jthiessen@penguincomputing.com>
Description
-----------
This driver implements support for the National Semiconductor LM85 and
compatible chips including the Analog Devices ADM1027, ADT7463 and
SMSC EMC6D10x chips family.
The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
specification. Using an analog to digital converter it measures three (3)
temperatures and five (5) voltages. It has four (4) 16-bit counters for
measuring fan speed. Five (5) digital inputs are provided for sampling the
VID signals from the processor to the VRM. Lastly, there are three (3) PWM
outputs that can be used to control fan speed.
The voltage inputs have internal scaling resistors so that the following
voltage can be measured without external resistors:
2.5V, 3.3V, 5V, 12V, and CPU core voltage (2.25V)
The temperatures measured are one internal diode, and two remote diodes.
Remote 1 is generally the CPU temperature. These inputs are designed to
measure a thermal diode like the one in a Pentium 4 processor in a socket
423 or socket 478 package. They can also measure temperature using a
transistor like the 2N3904.
A sophisticated control system for the PWM outputs is designed into the
LM85 that allows fan speed to be adjusted automatically based on any of the
three temperature sensors. Each PWM output is individually adjustable and
programmable. Once configured, the LM85 will adjust the PWM outputs in
response to the measured temperatures without further host intervention.
This feature can also be disabled for manual control of the PWM's.
Each of the measured inputs (voltage, temperature, fan speed) has
corresponding high/low limit values. The LM85 will signal an ALARM if any
measured value exceeds either limit.
The LM85 samples all inputs continuously. The lm85 driver will not read
the registers more often than once a second. Further, configuration data is
only read once each 5 minutes. There is twice as much config data as
measurements, so this would seem to be a worthwhile optimization.
Special Features
----------------
The LM85 has four fan speed monitoring modes. The ADM1027 has only two.
Both have special circuitry to compensate for PWM interactions with the
TACH signal from the fans. The ADM1027 can be configured to measure the
speed of a two wire fan, but the input conditioning circuitry is different
for 3-wire and 2-wire mode. For this reason, the 2-wire fan modes are not
exposed to user control. The BIOS should initialize them to the correct
mode. If you've designed your own ADM1027, you'll have to modify the
init_client function and add an insmod parameter to set this up.
To smooth the response of fans to changes in temperature, the LM85 has an
optional filter for smoothing temperatures. The ADM1027 has the same
config option but uses it to rate limit the changes to fan speed instead.
The ADM1027 and ADT7463 have a 10-bit ADC and can therefore measure
temperatures with 0.25 degC resolution. They also provide an offset to the
temperature readings that is automatically applied during measurement.
This offset can be used to zero out any errors due to traces and placement.
The documentation says that the offset is in 0.25 degC steps, but in
initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
confirmed this "bug". The ADT7463 is reported to work as described in the
documentation. The current lm85 driver does not show the offset register.
The ADT7463 has a THERM asserted counter. This counter has a 22.76ms
resolution and a range of 5.8 seconds. The driver implements a 32-bit
accumulator of the counter value to extend the range to over a year. The
counter will stay at it's max value until read.
See the vendor datasheets for more information. There is application note
from National (AN-1260) with some additional information about the LM85.
The Analog Devices datasheet is very detailed and describes a procedure for
determining an optimal configuration for the automatic PWM control.
The SMSC EMC6D100 & EMC6D101 monitor external voltages, temperatures, and
fan speeds. They use this monitoring capability to alert the system to out
of limit conditions and can automatically control the speeds of multiple
fans in a PC or embedded system. The EMC6D101, available in a 24-pin SSOP
package, and the EMC6D100, available in a 28-pin SSOP package, are designed
to be register compatible. The EMC6D100 offers all the features of the
EMC6D101 plus additional voltage monitoring and system control features.
Unfortunately it is not possible to distinguish between the package
versions on register level so these additional voltage inputs may read
zero. The EMC6D102 features addtional ADC bits thus extending precision
of voltage and temperature channels.
Hardware Configurations
-----------------------
The LM85 can be jumpered for 3 different SMBus addresses. There are
no other hardware configuration options for the LM85.
The lm85 driver detects both LM85B and LM85C revisions of the chip. See the
datasheet for a complete description of the differences. Other than
identifying the chip, the driver behaves no differently with regard to
these two chips. The LM85B is recommended for new designs.
The ADM1027 and ADT7463 chips have an optional SMBALERT output that can be
used to signal the chipset in case a limit is exceeded or the temperature
sensors fail. Individual sensor interrupts can be masked so they won't
trigger SMBALERT. The SMBALERT output if configured replaces one of the other
functions (PWM2 or IN0). This functionality is not implemented in current
driver.
The ADT7463 also has an optional THERM output/input which can be connected
to the processor PROC_HOT output. If available, the autofan control
dynamic Tmin feature can be enabled to keep the system temperature within
spec (just?!) with the least possible fan noise.
Configuration Notes
-------------------
Besides standard interfaces driver adds following:
* Temperatures and Zones
Each temperature sensor is associated with a Zone. There are three
sensors and therefore three zones (# 1, 2 and 3). Each zone has the following
temperature configuration points:
* temp#_auto_temp_off - temperature below which fans should be off or spinning very low.
* temp#_auto_temp_min - temperature over which fans start to spin.
* temp#_auto_temp_max - temperature when fans spin at full speed.
* temp#_auto_temp_crit - temperature when all fans will run full speed.
* PWM Control
There are three PWM outputs. The LM85 datasheet suggests that the
pwm3 output control both fan3 and fan4. Each PWM can be individually
configured and assigned to a zone for it's control value. Each PWM can be
configured individually according to the following options.
* pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off
temperature. (PWM value from 0 to 255)
* pwm#_auto_pwm_freq - select base frequency of PWM output. You can select
in range of 10.0 to 94.0 Hz in .1 Hz units.
(Values 100 to 940).
The pwm#_auto_pwm_freq can be set to one of the following 8 values. Setting the
frequency to a value not on this list, will result in the next higher frequency
being selected. The actual device frequency may vary slightly from this
specification as designed by the manufacturer. Consult the datasheet for more
details. (PWM Frequency values: 100, 150, 230, 300, 380, 470, 620, 940)
* pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature
the bahaviour of fans. Write 1 to let fans spinning at
pwm#_auto_pwm_min or write 0 to let them off.
NOTE: It has been reported that there is a bug in the LM85 that causes the flag
to be associated with the zones not the PWMs. This contradicts all the
published documentation. Setting pwm#_min_ctl in this case actually affects all
PWMs controlled by zone '#'.
* PWM Controlling Zone selection
* pwm#_auto_channels - controls zone that is associated with PWM
Configuration choices:
Value Meaning
------ ------------------------------------------------
1 Controlled by Zone 1
2 Controlled by Zone 2
3 Controlled by Zone 3
23 Controlled by higher temp of Zone 2 or 3
123 Controlled by highest temp of Zone 1, 2 or 3
0 PWM always 0% (off)
-1 PWM always 100% (full on)
-2 Manual control (write to 'pwm#' to set)
The National LM85's have two vendor specific configuration
features. Tach. mode and Spinup Control. For more details on these,
see the LM85 datasheet or Application Note AN-1260.
The Analog Devices ADM1027 has several vendor specific enhancements.
The number of pulses-per-rev of the fans can be set, Tach monitoring
can be optimized for PWM operation, and an offset can be applied to
the temperatures to compensate for systemic errors in the
measurements.
In addition to the ADM1027 features, the ADT7463 also has Tmin control
and THERM asserted counts. Automatic Tmin control acts to adjust the
Tmin value to maintain the measured temperature sensor at a specified
temperature. There isn't much documentation on this feature in the
ADT7463 data sheet. This is not supported by current driver.

View File

@ -0,0 +1,73 @@
Kernel driver lm87
==================
Supported chips:
* National Semiconductor LM87
Prefix: 'lm87'
Addresses scanned: I2C 0x2c - 0x2f
Datasheet: http://www.national.com/pf/LM/LM87.html
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark Studebaker <mdsxyz123@yahoo.com>,
Stephen Rousset <stephen.rousset@rocketlogix.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Jean Delvare <khali@linux-fr.org>,
Original 2.6 port Jeff Oliver
Description
-----------
This driver implements support for the National Semiconductor LM87.
The LM87 implements up to three temperature sensors, up to two fan
rotation speed sensors, up to seven voltage sensors, alarms, and some
miscellaneous stuff.
Temperatures are measured in degrees Celsius. Each input has a high
and low alarm settings. A high limit produces an alarm when the value
goes above it, and an alarm is also produced when the value goes below
the low limit.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
the readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in
volts. An alarm is triggered if the voltage has crossed a programmable
minimum or maximum limit. Note that minimum in this case always means
'closest to zero'; this is important for negative voltage measurements.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
hardware registers are read whenever any data is read (unless it is less
than 1.0 seconds since the last update). This means that you can easily
miss once-only alarms.
The lm87 driver only updates its values each 1.0 seconds; reading it more
often will do no harm, but will return 'old' values.
Hardware Configurations
-----------------------
The LM87 has four pins which can serve one of two possible functions,
depending on the hardware configuration.
Some functions share pins, so not all functions are available at the same
time. Which are depends on the hardware setup. This driver assumes that
the BIOS configured the chip correctly. In that respect, it differs from
the original driver (from lm_sensors for Linux 2.4), which would force the
LM87 to an arbitrary, compile-time chosen mode, regardless of the actual
chipset wiring.
For reference, here is the list of exclusive functions:
- in0+in5 (default) or temp3
- fan1 (default) or in6
- fan2 (default) or in7
- VID lines (default) or IRQ lines (not handled by this driver)

View File

@ -0,0 +1,121 @@
Kernel driver lm90
==================
Supported chips:
* National Semiconductor LM90
Prefix: 'lm90'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM90.html
* National Semiconductor LM89
Prefix: 'lm99'
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM89.html
* National Semiconductor LM99
Prefix: 'lm99'
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM99.html
* National Semiconductor LM86
Prefix: 'lm86'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM86.html
* Analog Devices ADM1032
Prefix: 'adm1032'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Analog Devices website
http://products.analog.com/products/info.asp?product=ADM1032
* Analog Devices ADT7461
Prefix: 'adt7461'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Analog Devices website
http://products.analog.com/products/info.asp?product=ADT7461
Note: Only if in ADM1032 compatibility mode
* Maxim MAX6657
Prefix: 'max6657'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Maxim MAX6658
Prefix: 'max6657'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Maxim MAX6659
Prefix: 'max6657'
Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e)
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
Author: Jean Delvare <khali@linux-fr.org>
Description
-----------
The LM90 is a digital temperature sensor. It senses its own temperature as
well as the temperature of up to one external diode. It is compatible
with many other devices such as the LM86, the LM89, the LM99, the ADM1032,
the MAX6657, MAX6658 and the MAX6659 all of which are supported by this driver.
Note that there is no easy way to differentiate between the last three
variants. The extra address and features of the MAX6659 are not supported by
this driver. Additionally, the ADT7461 is supported if found in ADM1032
compatibility mode.
The specificity of this family of chipsets over the ADM1021/LM84
family is that it features critical limits with hysteresis, and an
increased resolution of the remote temperature measurement.
The different chipsets of the family are not strictly identical, although
very similar. This driver doesn't handle any specific feature for now,
but could if there ever was a need for it. For reference, here comes a
non-exhaustive list of specific features:
LM90:
* Filter and alert configuration register at 0xBF.
* ALERT is triggered by temperatures over critical limits.
LM86 and LM89:
* Same as LM90
* Better external channel accuracy
LM99:
* Same as LM89
* External temperature shifted by 16 degrees down
ADM1032:
* Consecutive alert register at 0x22.
* Conversion averaging.
* Up to 64 conversions/s.
* ALERT is triggered by open remote sensor.
ADT7461
* Extended temperature range (breaks compatibility)
* Lower resolution for remote temperature
MAX6657 and MAX6658:
* Remote sensor type selection
MAX6659
* Selectable address
* Second critical temperature limit
* Remote sensor type selection
All temperature values are given in degrees Celsius. Resolution
is 1.0 degree for the local temperature, 0.125 degree for the remote
temperature.
Each sensor has its own high and low limits, plus a critical limit.
Additionally, there is a relative hysteresis value common to both critical
values. To make life easier to user-space applications, two absolute values
are exported, one for each channel, but these values are of course linked.
Only the local hysteresis can be set from user-space, and the same delta
applies to the remote hysteresis.
The lm90 driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.

View File

@ -0,0 +1,37 @@
Kernel driver lm92
==================
Supported chips:
* National Semiconductor LM92
Prefix: 'lm92'
Addresses scanned: I2C 0x48 - 0x4b
Datasheet: http://www.national.com/pf/LM/LM92.html
* National Semiconductor LM76
Prefix: 'lm92'
Addresses scanned: none, force parameter needed
Datasheet: http://www.national.com/pf/LM/LM76.html
* Maxim MAX6633/MAX6634/MAX6635
Prefix: 'lm92'
Addresses scanned: I2C 0x48 - 0x4b
MAX6633 with address in 0x40 - 0x47, 0x4c - 0x4f needs force parameter
and MAX6634 with address in 0x4c - 0x4f needs force parameter
Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
Authors:
Abraham van der Merwe <abraham@2d3d.co.za>
Jean Delvare <khali@linux-fr.org>
Description
-----------
This driver implements support for the National Semiconductor LM92
temperature sensor.
Each LM92 temperature sensor supports a single temperature sensor. There are
alarms for high, low, and critical thresholds. There's also an hysteresis to
control the thresholds for resetting alarms.
Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635,
which are mostly compatible. They have not all been tested, so you
may need to use the force parameter.

View File

@ -0,0 +1,29 @@
Kernel driver max1619
=====================
Supported chips:
* Maxim MAX1619
Prefix: 'max1619'
Addresses scanned: I2C 0x18-0x1a, 0x29-0x2b, 0x4c-0x4e
Datasheet: Publicly available at the Maxim website
http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
Authors:
Alexey Fisher <fishor@mail.ru>,
Jean Delvare <khali@linux-fr.org>
Description
-----------
The MAX1619 is a digital temperature sensor. It senses its own temperature as
well as the temperature of up to one external diode.
All temperature values are given in degrees Celsius. Resolution
is 1.0 degree for the local temperature and for the remote temperature.
Only the external sensor has high and low limits.
The max1619 driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.

View File

@ -0,0 +1,54 @@
Kernel driver max6875
=====================
Supported chips:
* Maxim max6874, max6875
Prefixes: 'max6875'
Addresses scanned: 0x50, 0x52
Datasheets:
http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
Author: Ben Gardner <bgardner@wabtec.com>
Module Parameters
-----------------
* allow_write int
Set to non-zero to enable write permission:
*0: Read only
1: Read and write
Description
-----------
The MAXIM max6875 is a EEPROM-programmable power-supply sequencer/supervisor.
It provides timed outputs that can be used as a watchdog, if properly wired.
It also provides 512 bytes of user EEPROM.
At reset, the max6875 reads the configuration eeprom into its configuration
registers. The chip then begins to operate according to the values in the
registers.
See the datasheet for details on how to program the EEPROM.
Sysfs entries
-------------
eeprom_user - 512 bytes of user-defined EEPROM space. Only writable if
allow_write was set and register 0x43 is 0.
eeprom_config - 70 bytes of config EEPROM. Note that changes will not get
loaded into register space until a power cycle or device reset.
reg_config - 70 bytes of register space. Any changes take affect immediately.
General Remarks
---------------
A typical application will require that the EEPROMs be programmed once and
never altered afterwards.

View File

@ -0,0 +1,189 @@
Kernel driver pc87360
=====================
Supported chips:
* National Semiconductor PC87360, PC87363, PC87364, PC87365 and PC87366
Prefixes: 'pc87360', 'pc87363', 'pc87364', 'pc87365', 'pc87366'
Addresses scanned: none, address read from Super I/O config space
Datasheets:
http://www.national.com/pf/PC/PC87360.html
http://www.national.com/pf/PC/PC87363.html
http://www.national.com/pf/PC/PC87364.html
http://www.national.com/pf/PC/PC87365.html
http://www.national.com/pf/PC/PC87366.html
Authors: Jean Delvare <khali@linux-fr.org>
Thanks to Sandeep Mehta, Tonko de Rooy and Daniel Ceregatti for testing.
Thanks to Rudolf Marek for helping me investigate conversion issues.
Module Parameters
-----------------
* init int
Chip initialization level:
0: None
*1: Forcibly enable internal voltage and temperature channels, except in9
2: Forcibly enable all voltage and temperature channels, except in9
3: Forcibly enable all voltage and temperature channels, including in9
Note that this parameter has no effect for the PC87360, PC87363 and PC87364
chips.
Also note that for the PC87366, initialization levels 2 and 3 don't enable
all temperature channels, because some of them share pins with each other,
so they can't be used at the same time.
Description
-----------
The National Semiconductor PC87360 Super I/O chip contains monitoring and
PWM control circuitry for two fans. The PC87363 chip is similar, and the
PC87364 chip has monitoring and PWM control for a third fan.
The National Semiconductor PC87365 and PC87366 Super I/O chips are complete
hardware monitoring chipsets, not only controlling and monitoring three fans,
but also monitoring eleven voltage inputs and two (PC87365) or up to four
(PC87366) temperatures.
Chip #vin #fan #pwm #temp devid
PC87360 - 2 2 - 0xE1
PC87363 - 2 2 - 0xE8
PC87364 - 3 3 - 0xE4
PC87365 11 3 3 2 0xE5
PC87366 11 3 3 3-4 0xE9
The driver assumes that no more than one chip is present, and one of the
standard Super I/O addresses is used (0x2E/0x2F or 0x4E/0x4F)
Fan Monitoring
--------------
Fan rotation speeds are reported in RPM (revolutions per minute). An alarm
is triggered if the rotation speed has dropped below a programmable limit.
A different alarm is triggered if the fan speed is too low to be measured.
Fan readings are affected by a programmable clock divider, giving the
readings more range or accuracy. Usually, users have to learn how it works,
but this driver implements dynamic clock divider selection, so you don't
have to care no more.
For reference, here are a few values about clock dividers:
slowest accuracy highest
measurable around 3000 accurate
divider speed (RPM) RPM (RPM) speed (RPM)
1 1882 18 6928
2 941 37 4898
4 470 74 3464
8 235 150 2449
For the curious, here is how the values above were computed:
* slowest measurable speed: clock/(255*divider)
* accuracy around 3000 RPM: 3000^2/clock
* highest accurate speed: sqrt(clock*100)
The clock speed for the PC87360 family is 480 kHz. I arbitrarily chose 100
RPM as the lowest acceptable accuracy.
As mentioned above, you don't have to care about this no more.
Note that not all RPM values can be represented, even when the best clock
divider is selected. This is not only true for the measured speeds, but
also for the programmable low limits, so don't be surprised if you try to
set, say, fan1_min to 2900 and it finally reads 2909.
Fan Control
-----------
PWM (pulse width modulation) values range from 0 to 255, with 0 meaning
that the fan is stopped, and 255 meaning that the fan goes at full speed.
Be extremely careful when changing PWM values. Low PWM values, even
non-zero, can stop the fan, which may cause irreversible damage to your
hardware if temperature increases too much. When changing PWM values, go
step by step and keep an eye on temperatures.
One user reported problems with PWM. Changing PWM values would break fan
speed readings. No explanation nor fix could be found.
Temperature Monitoring
----------------------
Temperatures are reported in degrees Celsius. Each temperature measured has
associated low, high and overtemperature limits, each of which triggers an
alarm when crossed.
The first two temperature channels are external. The third one (PC87366
only) is internal.
The PC87366 has three additional temperature channels, based on
thermistors (as opposed to thermal diodes for the first three temperature
channels). For technical reasons, these channels are held by the VLM
(voltage level monitor) logical device, not the TMS (temperature
measurement) one. As a consequence, these temperatures are exported as
voltages, and converted into temperatures in user-space.
Note that these three additional channels share their pins with the
external thermal diode channels, so you (physically) can't use them all at
the same time. Although it should be possible to mix the two sensor types,
the documents from National Semiconductor suggest that motherboard
manufacturers should choose one type and stick to it. So you will more
likely have either channels 1 to 3 (thermal diodes) or 3 to 6 (internal
thermal diode, and thermistors).
Voltage Monitoring
------------------
Voltages are reported relatively to a reference voltage, either internal or
external. Some of them (in7:Vsb, in8:Vdd and in10:AVdd) are divided by two
internally, you will have to compensate in sensors.conf. Others (in0 to in6)
are likely to be divided externally. The meaning of each of these inputs as
well as the values of the resistors used for division is left to the
motherboard manufacturers, so you will have to document yourself and edit
sensors.conf accordingly. National Semiconductor has a document with
recommended resistor values for some voltages, but this still leaves much
room for per motherboard specificities, unfortunately. Even worse,
motherboard manufacturers don't seem to care about National Semiconductor's
recommendations.
Each voltage measured has associated low and high limits, each of which
triggers an alarm when crossed.
When available, VID inputs are used to provide the nominal CPU Core voltage.
The driver will default to VRM 9.0, but this can be changed from user-space.
The chipsets can handle two sets of VID inputs (on dual-CPU systems), but
the driver will only export one for now. This may change later if there is
a need.
General Remarks
---------------
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may already
have disappeared! Note that all hardware registers are read whenever any
data is read (unless it is less than 2 seconds since the last update, in
which case cached values are returned instead). As a consequence, when
a once-only alarm triggers, it may take 2 seconds for it to show, and 2
more seconds for it to disappear.
Monitoring of in9 isn't enabled at lower init levels (<3) because that
channel measures the battery voltage (Vbat). It is a known fact that
repeatedly sampling the battery voltage reduces its lifetime. National
Semiconductor smartly designed their chipset so that in9 is sampled only
once every 1024 sampling cycles (that is every 34 minutes at the default
sampling rate), so the effect is attenuated, but still present.
Limitations
-----------
The datasheets suggests that some values (fan mins, fan dividers)
shouldn't be changed once the monitoring has started, but we ignore that
recommendation. We'll reconsider if it actually causes trouble.

View File

@ -0,0 +1,47 @@
Kernel driver pca9539
=====================
Supported chips:
* Philips PCA9539
Prefix: 'pca9539'
Addresses scanned: 0x74 - 0x77
Datasheet:
http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf
Author: Ben Gardner <bgardner@wabtec.com>
Description
-----------
The Philips PCA9539 is a 16 bit low power I/O device.
All 16 lines can be individually configured as an input or output.
The input sense can also be inverted.
The 16 lines are split between two bytes.
Sysfs entries
-------------
Each is a byte that maps to the 8 I/O bits.
A '0' suffix is for bits 0-7, while '1' is for bits 8-15.
input[01] - read the current value
output[01] - sets the output value
direction[01] - direction of each bit: 1=input, 0=output
invert[01] - toggle the input bit sense
input reads the actual state of the line and is always available.
The direction defaults to input for all channels.
General Remarks
---------------
Note that each output, direction, and invert entry controls 8 lines.
You should use the read, modify, write sequence.
For example. to set output bit 0 of 1.
val=$(cat output0)
val=$(( $val | 1 ))
echo $val > output0

View File

@ -0,0 +1,69 @@
Kernel driver pcf8574
=====================
Supported chips:
* Philips PCF8574
Prefix: 'pcf8574'
Addresses scanned: I2C 0x20 - 0x27
Datasheet: Publicly available at the Philips Semiconductors website
http://www.semiconductors.philips.com/pip/PCF8574P.html
* Philips PCF8574A
Prefix: 'pcf8574a'
Addresses scanned: I2C 0x38 - 0x3f
Datasheet: Publicly available at the Philips Semiconductors website
http://www.semiconductors.philips.com/pip/PCF8574P.html
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Aurelien Jarno <aurelien@aurel32.net>,
Jean Delvare <khali@linux-fr.org>,
Description
-----------
The PCF8574(A) is an 8-bit I/O expander for the I2C bus produced by Philips
Semiconductors. It is designed to provide a byte I2C interface to up to 16
separate devices (8 x PCF8574 and 8 x PCF8574A).
This device consists of a quasi-bidirectional port. Each of the eight I/Os
can be independently used as an input or output. To setup an I/O as an
input, you have to write a 1 to the corresponding output.
For more informations see the datasheet.
Accessing PCF8574(A) via /sys interface
-------------------------------------
! Be careful !
The PCF8574(A) is plainly impossible to detect ! Stupid chip.
So every chip with address in the interval [20..27] and [38..3f] are
detected as PCF8574(A). If you have other chips in this address
range, the workaround is to load this module after the one
for your others chips.
On detection (i.e. insmod, modprobe et al.), directories are being
created for each detected PCF8574(A):
/sys/bus/i2c/devices/<0>-<1>/
where <0> is the bus the chip was detected on (e. g. i2c-0)
and <1> the chip address ([20..27] or [38..3f]):
(example: /sys/bus/i2c/devices/1-0020/)
Inside these directories, there are two files each:
read and write (and one file with chip name).
The read file is read-only. Reading gives you the current I/O input
if the corresponding output is set as 1, otherwise the current output
value, that is to say 0.
The write file is read/write. Writing a value outputs it on the I/O
port. Reading returns the last written value.
On module initialization the chip is configured as eight inputs (all
outputs to 1), so you can connect any circuit to the PCF8574(A) without
being afraid of short-circuit.

View File

@ -0,0 +1,90 @@
Kernel driver pcf8591
=====================
Supported chips:
* Philips PCF8591
Prefix: 'pcf8591'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the Philips Semiconductor website
http://www.semiconductors.philips.com/pip/PCF8591P.html
Authors:
Aurelien Jarno <aurelien@aurel32.net>
valuable contributions by Jan M. Sendler <sendler@sendler.de>,
Jean Delvare <khali@linux-fr.org>
Description
-----------
The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
analog output) for the I2C bus produced by Philips Semiconductors. It
is designed to provide a byte I2C interface to up to 4 separate devices.
The PCF8591 has 4 analog inputs programmable as single-ended or
differential inputs :
- mode 0 : four single ended inputs
Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
- mode 1 : three differential inputs
Pins AIN3 is the common negative differential input
Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
- mode 2 : single ended and differential mixed
Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
Pins AIN2 is the positive differential input for channel 3
Pins AIN3 is the negative differential input for channel 3
- mode 3 : two differential inputs
Pins AIN0 is the positive differential input for channel 0
Pins AIN1 is the negative differential input for channel 0
Pins AIN2 is the positive differential input for channel 1
Pins AIN3 is the negative differential input for channel 1
See the datasheet for details.
Module parameters
-----------------
* input_mode int
Analog input mode:
0 = four single ended inputs
1 = three differential inputs
2 = single ended and differential mixed
3 = two differential inputs
Accessing PCF8591 via /sys interface
-------------------------------------
! Be careful !
The PCF8591 is plainly impossible to detect ! Stupid chip.
So every chip with address in the interval [48..4f] is
detected as PCF8591. If you have other chips in this address
range, the workaround is to load this module after the one
for your others chips.
On detection (i.e. insmod, modprobe et al.), directories are being
created for each detected PCF8591:
/sys/bus/devices/<0>-<1>/
where <0> is the bus the chip was detected on (e. g. i2c-0)
and <1> the chip address ([48..4f])
Inside these directories, there are such files:
in0, in1, in2, in3, out0_enable, out0_output, name
Name contains chip name.
The in0, in1, in2 and in3 files are RO. Reading gives the value of the
corresponding channel. Depending on the current analog inputs configuration,
files in2 and/or in3 do not exist. Values range are from 0 to 255 for single
ended inputs and -128 to +127 for differential inputs (8-bit ADC).
The out0_enable file is RW. Reading gives "1" for analog output enabled and
"0" for analog output disabled. Writing accepts "0" and "1" accordingly.
The out0_output file is RW. Writing a number between 0 and 255 (8-bit DAC), send
the value to the digital-to-analog converter. Note that a voltage will
only appears on AOUT pin if aout0_enable equals 1. Reading returns the last
value written.

View File

@ -0,0 +1,106 @@
Kernel driver sis5595
=====================
Supported chips:
* Silicon Integrated Systems Corp. SiS5595 Southbridge Hardware Monitor
Prefix: 'sis5595'
Addresses scanned: ISA in PCI-space encoded address
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
Authors:
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Aurelien Jarno <aurelien@aurel32.net> 2.6 port
SiS southbridge has a LM78-like chip integrated on the same IC.
This driver is a customized copy of lm78.c
Supports following revisions:
Version PCI ID PCI Revision
1 1039/0008 AF or less
2 1039/0008 B0 or greater
Note: these chips contain a 0008 device which is incompatible with the
5595. We recognize these by the presence of the listed
"blacklist" PCI ID and refuse to load.
NOT SUPPORTED PCI ID BLACKLIST PCI ID
540 0008 0540
550 0008 0550
5513 0008 5511
5581 0008 5597
5582 0008 5597
5597 0008 5597
630 0008 0630
645 0008 0645
730 0008 0730
735 0008 0735
Module Parameters
-----------------
force_addr=0xaddr Set the I/O base address. Useful for boards
that don't set the address in the BIOS. Does not do a
PCI force; the device must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
Example: 'modprobe sis5595 force_addr=0x290'
Description
-----------
The SiS5595 southbridge has integrated hardware monitor functions. It also
has an I2C bus, but this driver only supports the hardware monitor. For the
I2C bus driver see i2c-sis5595.
The SiS5595 implements zero or one temperature sensor, two fan speed
sensors, four or five voltage sensors, and alarms.
On the first version of the chip, there are four voltage sensors and one
temperature sensor.
On the second version of the chip, the temperature sensor (temp) and the
fifth voltage sensor (in4) share a pin which is configurable, but not
through the driver. Sorry. The driver senses the configuration of the pin,
which was hopefully set by the BIOS.
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the max is crossed; it is also triggered when it drops below the min
value. Measurements are guaranteed between -55 and +125 degrees, with a
resolution of 1 degree.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
the readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in volts. An
alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 4.08 volts, with a resolution of
0.016 volt.
In addition to the alarms described above, there is a BTI alarm, which gets
triggered when an external chip has crossed its limits. Usually, this is
connected to some LM75-like chip; if at least one crosses its limits, this
bit gets set.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may already
have disappeared! Note that in the current implementation, all hardware
registers are read whenever any data is read (unless it is less than 1.5
seconds since the last update). This means that you can easily miss
once-only alarms.
The SiS5595 only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
Problems
--------
Some chips refuse to be enabled. We don't know why.
The driver will recognize this and print a message in dmesg.

View File

@ -1,7 +1,19 @@
Kernel driver smsc47b397
========================
Supported chips:
* SMSC LPC47B397-NC
Prefix: 'smsc47b397'
Addresses scanned: none, address read from Super I/O config space
Datasheet: In this file
Authors: Mark M. Hoffman <mhoffman@lightlink.com>
Utilitek Systems, Inc.
November 23, 2004
The following specification describes the SMSC LPC47B397-NC sensor chip
(for which there is no public datasheet available). This document was
(for which there is no public datasheet available). This document was
provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
by Mark M. Hoffman <mhoffman@lightlink.com>.
@ -10,10 +22,10 @@ by Mark M. Hoffman <mhoffman@lightlink.com>.
Methods for detecting the HP SIO and reading the thermal data on a dc7100.
The thermal information on the dc7100 is contained in the SIO Hardware Monitor
(HWM). The information is accessed through an index/data pair. The index/data
pair is located at the HWM Base Address + 0 and the HWM Base Address + 1. The
(HWM). The information is accessed through an index/data pair. The index/data
pair is located at the HWM Base Address + 0 and the HWM Base Address + 1. The
HWM Base address can be obtained from Logical Device 8, registers 0x60 (MSB)
and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and
and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and
0x480 and 0x481 for the index/data pair.
Reading temperature information.
@ -50,7 +62,7 @@ Reading the tach LSB locks the tach MSB.
The LSB Must be read first.
How to convert the tach reading to RPM.
The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB)
The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB)
The SIO counts the number of 90kHz (11.111us) pulses per revolution.
RPM = 60/(TCount * 11.111us)
@ -72,20 +84,20 @@ To program the configuration registers, the following sequence must be followed:
Enter Configuration Mode
To place the chip into the Configuration State The config key (0x55) is written
to the CONFIG PORT (0x2E).
to the CONFIG PORT (0x2E).
Configuration Mode
In configuration mode, the INDEX PORT is located at the CONFIG PORT address and
the DATA PORT is at INDEX PORT address + 1.
The desired configuration registers are accessed in two steps:
The desired configuration registers are accessed in two steps:
a. Write the index of the Logical Device Number Configuration Register
(i.e., 0x07) to the INDEX PORT and then write the number of the
desired logical device to the DATA PORT.
b. Write the address of the desired configuration register within the
logical device to the INDEX PORT and then write or read the config-
uration register through the DATA PORT.
uration register through the DATA PORT.
Note: If accessing the Global Configuration Registers, step (a) is not required.
@ -96,18 +108,18 @@ The chip returns to the RUN State. (This is important).
Programming Example
The following is an example of how to read the SIO Device ID located at 0x20
; ENTER CONFIGURATION MODE
; ENTER CONFIGURATION MODE
MOV DX,02EH
MOV AX,055H
OUT DX,AL
; GLOBAL CONFIGURATION REGISTER
; GLOBAL CONFIGURATION REGISTER
MOV DX,02EH
MOV AL,20H
OUT DX,AL
OUT DX,AL
; READ THE DATA
MOV DX,02FH
IN AL,DX
; EXIT CONFIGURATION MODE
; EXIT CONFIGURATION MODE
MOV DX,02EH
MOV AX,0AAH
OUT DX,AL
@ -122,12 +134,12 @@ Obtaining the HWM Base Address.
The following is an example of how to read the HWM Base Address located in
Logical Device 8.
; ENTER CONFIGURATION MODE
; ENTER CONFIGURATION MODE
MOV DX,02EH
MOV AX,055H
OUT DX,AL
; CONFIGURE REGISTER CRE0,
; LOGICAL DEVICE 8
; CONFIGURE REGISTER CRE0,
; LOGICAL DEVICE 8
MOV DX,02EH
MOV AL,07H
OUT DX,AL ;Point to LD# Config Reg
@ -135,12 +147,12 @@ MOV DX,02FH
MOV AL, 08H
OUT DX,AL;Point to Logical Device 8
;
MOV DX,02EH
MOV DX,02EH
MOV AL,60H
OUT DX,AL ; Point to HWM Base Addr MSB
MOV DX,02FH
IN AL,DX ; Get MSB of HWM Base Addr
; EXIT CONFIGURATION MODE
; EXIT CONFIGURATION MODE
MOV DX,02EH
MOV AX,0AAH
OUT DX,AL

View File

@ -0,0 +1,52 @@
Kernel driver smsc47m1
======================
Supported chips:
* SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192
Addresses scanned: none, address read from Super I/O config space
Prefix: 'smsc47m1'
Datasheets:
http://www.smsc.com/main/datasheets/47b27x.pdf
http://www.smsc.com/main/datasheets/47m10x.pdf
http://www.smsc.com/main/tools/discontinued/47m13x.pdf
http://www.smsc.com/main/datasheets/47m14x.pdf
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
http://www.smsc.com/main/datasheets/47m192.pdf
Authors:
Mark D. Studebaker <mdsxyz123@yahoo.com>,
With assistance from Bruce Allen <ballen@uwm.edu>, and his
fan.c program: http://www.lsc-group.phys.uwm.edu/%7Eballen/driver/
Gabriele Gorla <gorlik@yahoo.com>,
Jean Delvare <khali@linux-fr.org>
Description
-----------
The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
contain monitoring and PWM control circuitry for two fans.
The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
in addition to the fan monitoring and control. The hardware monitoring
block is not supported by the driver.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
the readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
PWM values are from 0 to 255.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
hardware registers are read whenever any data is read (unless it is less
than 1.5 seconds since the last update). This means that you can easily
miss once-only alarms.
**********************
The lm_sensors project gratefully acknowledges the support of
Intel in the development of this driver.

View File

@ -0,0 +1,65 @@
Kernel driver via686a
=====================
Supported chips:
* Via VT82C686A, VT82C686B Southbridge Integrated Hardware Monitor
Prefix: 'via686a'
Addresses scanned: ISA in PCI-space encoded address
Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/)
Authors:
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Bob Dougherty <bobd@stanford.edu>
(Some conversion-factor data were contributed by
Jonathan Teh Soon Yew <j.teh@iname.com>
and Alex van Kaam <darkside@chello.nl>.)
Module Parameters
-----------------
force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards
that don't set the address in the BIOS. Does not do a
PCI force; the via686a must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
Example: 'modprobe via686a force_addr=0x6000'
Description
-----------
The driver does not distinguish between the chips and reports
all as a 686A.
The Via 686a southbridge has integrated hardware monitor functionality.
It also has an I2C bus, but this driver only supports the hardware monitor.
For the I2C bus driver, see <file:Documentation/i2c/busses/i2c-viapro>
The Via 686a implements three temperature sensors, two fan rotation speed
sensors, five voltage sensors and alarms.
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed; it is triggered again
as soon as it drops below the hysteresis value.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
the readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in volts.
An alarm is triggered if the voltage has crossed a programmable minimum
or maximum limit. Voltages are internally scalled, so each voltage channel
has a different resolution and range.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
hardware registers are read whenever any data is read (unless it is less
than 1.5 seconds since the last update). This means that you can easily
miss once-only alarms.
The driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.

View File

@ -0,0 +1,66 @@
Kernel driver w83627hf
======================
Supported chips:
* Winbond W83627HF (ISA accesses ONLY)
Prefix: 'w83627hf'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
* Winbond W83627THF
Prefix: 'w83627thf'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
* Winbond W83697HF
Prefix: 'w83697hf'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: http://www.winbond.com/PDF/sheet/697hf.pdf
* Winbond W83637HF
Prefix: 'w83637hf'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark Studebaker <mdsxyz123@yahoo.com>,
Bernhard C. Schrenk <clemy@clemy.org>
Module Parameters
-----------------
* force_addr: int
Initialize the ISA address of the sensors
* force_i2c: int
Initialize the I2C address of the sensors
* init: int
(default is 1)
Use 'init=0' to bypass initializing the chip.
Try this if your computer crashes when you load the module.
Description
-----------
This driver implements support for ISA accesses *only* for
the Winbond W83627HF, W83627THF, W83697HF and W83637HF Super I/O chips.
We will refer to them collectively as Winbond chips.
This driver supports ISA accesses, which should be more reliable
than i2c accesses. Also, for Tyan boards which contain both a
Super I/O chip and a second i2c-only Winbond chip (often a W83782D),
using this driver will avoid i2c address conflicts and complex
initialization that were required in the w83781d driver.
If you really want i2c accesses for these Super I/O chips,
use the w83781d driver. However this is not the preferred method
now that this ISA driver has been developed.
Technically, the w83627thf does not support a VID reading. However, it's
possible or even likely that your mainboard maker has routed these signals
to a specific set of general purpose IO pins (the Asus P4C800-E is one such
board). The w83627thf driver now interprets these as VID. If the VID on
your board doesn't work, first see doc/vid in the lm_sensors package. If
that still doesn't help, email us at lm-sensors@lm-sensors.org.
For further information on this driver see the w83781d driver
documentation.

View File

@ -0,0 +1,402 @@
Kernel driver w83781d
=====================
Supported chips:
* Winbond W83781D
Prefix: 'w83781d'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
* Winbond W83782D
Prefix: 'w83782d'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
* Winbond W83783S
Prefix: 'w83783s'
Addresses scanned: I2C 0x2d
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
* Winbond W83627HF
Prefix: 'w83627hf'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
* Asus AS99127F
Prefix: 'as99127f'
Addresses scanned: I2C 0x28 - 0x2f
Datasheet: Unavailable from Asus
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark Studebaker <mdsxyz123@yahoo.com>
Module parameters
-----------------
* init int
(default 1)
Use 'init=0' to bypass initializing the chip.
Try this if your computer crashes when you load the module.
force_subclients=bus,caddr,saddr,saddr
This is used to force the i2c addresses for subclients of
a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b'
to force the subclients of chip 0x2d on bus 0 to i2c addresses
0x4a and 0x4b. This parameter is useful for certain Tyan boards.
Description
-----------
This driver implements support for the Winbond W83781D, W83782D, W83783S,
W83627HF chips, and the Asus AS99127F chips. We will refer to them
collectively as W8378* chips.
There is quite some difference between these chips, but they are similar
enough that it was sensible to put them together in one driver.
The W83627HF chip is assumed to be identical to the ISA W83782D.
The Asus chips are similar to an I2C-only W83782D.
Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
as99127f 7 3 0 3 0x31 0x12c3 yes no
as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
Detection of these chips can sometimes be foiled because they can be in
an internal state that allows no clean access. If you know the address
of the chip, use a 'force' parameter; this will put them into a more
well-behaved state first.
The W8378* implements temperature sensors (three on the W83781D and W83782D,
two on the W83783S), three fan rotation speed sensors, voltage sensors
(seven on the W83781D, nine on the W83782D and six on the W83783S), VID
lines, alarms with beep warnings, and some miscellaneous stuff.
Temperatures are measured in degrees Celsius. There is always one main
temperature sensor, and one (W83783S) or two (W83781D and W83782D) other
sensors. An alarm is triggered for the main sensor once when the
Overtemperature Shutdown limit is crossed; it is triggered again as soon as
it drops below the Hysteresis value. A more useful behavior
can be found by setting the Hysteresis value to +127 degrees Celsius; in
this case, alarms are issued during all the time when the actual temperature
is above the Overtemperature Shutdown value. The driver sets the
hysteresis value for temp1 to 127 at initialization.
For the other temperature sensor(s), an alarm is triggered when the
temperature gets higher then the Overtemperature Shutdown value; it stays
on until the temperature falls below the Hysteresis value. But on the
W83781D, there is only one alarm that functions for both other sensors!
Temperatures are guaranteed within a range of -55 to +125 degrees. The
main temperature sensors has a resolution of 1 degree; the other sensor(s)
of 0.5 degree.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8 for the
W83781D; 1, 2, 4, 8, 16, 32, 64 or 128 for the others) to give
the readings more range or accuracy. Not all RPM values can accurately
be represented, so some rounding is done. With a divider of 2, the lowest
representable value is around 2600 RPM.
Voltage sensors (also known as IN sensors) report their values in volts.
An alarm is triggered if the voltage has crossed a programmable minimum
or maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 4.08 volts, with a resolution
of 0.016 volt.
The VID lines encode the core voltage value: the voltage level your processor
should work with. This is hardcoded by the mainboard and/or processor itself.
It is a value in volts. When it is unconnected, you will often find the
value 3.50 V here.
The W83782D and W83783S temperature conversion machine understands about
several kinds of temperature probes. You can program the so-called
beta value in the sensor files. '1' is the PII/Celeron diode, '2' is the
TN3904 transistor, and 3435 the default thermistor value. Other values
are (not yet) supported.
In addition to the alarms described above, there is a CHAS alarm on the
chips which triggers if your computer case is open.
When an alarm goes off, you can be warned by a beeping signal through
your computer speaker. It is possible to enable all beeping globally,
or only the beeping for some alarms.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
hardware registers are read whenever any data is read (unless it is less
than 1.5 seconds since the last update). This means that you can easily
miss once-only alarms.
The chips only update values each 1.5 seconds; reading them more often
will do no harm, but will return 'old' values.
AS99127F PROBLEMS
-----------------
The as99127f support was developed without the benefit of a datasheet.
In most cases it is treated as a w83781d (although revision 2 of the
AS99127F looks more like a w83782d).
This support will be BETA until a datasheet is released.
One user has reported problems with fans stopping
occasionally.
Note that the individual beep bits are inverted from the other chips.
The driver now takes care of this so that user-space applications
don't have to know about it.
Known problems:
- Problems with diode/thermistor settings (supported?)
- One user reports fans stopping under high server load.
- Revision 2 seems to have 2 PWM registers but we don't know
how to handle them. More details below.
These will not be fixed unless we get a datasheet.
If you have problems, please lobby Asus to release a datasheet.
Unfortunately several others have without success.
Please do not send mail to us asking for better as99127f support.
We have done the best we can without a datasheet.
Please do not send mail to the author or the sensors group asking for
a datasheet or ideas on how to convince Asus. We can't help.
NOTES:
-----
783s has no in1 so that in[2-6] are compatible with the 781d/782d.
783s pin is programmable for -5V or temp1; defaults to -5V,
no control in driver so temp1 doesn't work.
782d and 783s datasheets differ on which is pwm1 and which is pwm2.
We chose to follow 782d.
782d and 783s pin is programmable for fan3 input or pwm2 output;
defaults to fan3 input.
If pwm2 is enabled (with echo 255 1 > pwm2), then
fan3 will report 0.
782d has pwm1-2 for ISA, pwm1-4 for i2c. (pwm3-4 share pins with
the ISA pins)
Data sheet updates:
------------------
- PWM clock registers:
000: master / 512
001: master / 1024
010: master / 2048
011: master / 4096
100: master / 8192
Answers from Winbond tech support
---------------------------------
>
> 1) In the W83781D data sheet section 7.2 last paragraph, it talks about
> reprogramming the R-T table if the Beta of the thermistor is not
> 3435K. The R-T table is described briefly in section 8.20.
> What formulas do I use to program a new R-T table for a given Beta?
>
We are sorry that the calculation for R-T table value is
confidential. If you have another Beta value of thermistor, we can help
to calculate the R-T table for you. But you should give us real R-T
Table which can be gotten by thermistor vendor. Therefore we will calculate
them and obtain 32-byte data, and you can fill the 32-byte data to the
register in Bank0.CR51 of W83781D.
> 2) In the W83782D data sheet, it mentions that pins 38, 39, and 40 are
> programmable to be either thermistor or Pentium II diode inputs.
> How do I program them for diode inputs? I can't find any register
> to program these to be diode inputs.
--> You may program Bank0 CR[5Dh] and CR[59h] registers.
CR[5Dh] bit 1(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
thermistor 0 0 0
diode 1 1 1
(error) CR[59h] bit 4(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
(right) CR[59h] bit 4(VTIN1) bit 5(VTIN2) bit 6(VTIN3)
PII thermal diode 1 1 1
2N3904 diode 0 0 0
Asus Clones
-----------
We have no datasheets for the Asus clones (AS99127F and ASB100 Bach).
Here are some very useful information that were given to us by Alex Van
Kaam about how to detect these chips, and how to read their values. He
also gives advice for another Asus chipset, the Mozart-2 (which we
don't support yet). Thanks Alex!
I reworded some parts and added personal comments.
# Detection:
AS99127F rev.1, AS99127F rev.2 and ASB100:
- I2C address range: 0x29 - 0x2F
- If register 0x58 holds 0x31 then we have an Asus (either ASB100 or
AS99127F)
- Which one depends on register 0x4F (manufacturer ID):
0x06 or 0x94: ASB100
0x12 or 0xC3: AS99127F rev.1
0x5C or 0xA3: AS99127F rev.2
Note that 0x5CA3 is Winbond's ID (WEC), which let us think Asus get their
AS99127F rev.2 direct from Winbond. The other codes mean ATT and DVC,
respectively. ATT could stand for Asustek something (although it would be
very badly chosen IMHO), I don't know what DVC could stand for. Maybe
these codes simply aren't meant to be decoded that way.
Mozart-2:
- I2C address: 0x77
- If register 0x58 holds 0x56 or 0x10 then we have a Mozart-2
- Of the Mozart there are 3 types:
0x58=0x56, 0x4E=0x94, 0x4F=0x36: Asus ASM58 Mozart-2
0x58=0x56, 0x4E=0x94, 0x4F=0x06: Asus AS2K129R Mozart-2
0x58=0x10, 0x4E=0x5C, 0x4F=0xA3: Asus ??? Mozart-2
You can handle all 3 the exact same way :)
# Temperature sensors:
ASB100:
- sensor 1: register 0x27
- sensor 2 & 3 are the 2 LM75's on the SMBus
- sensor 4: register 0x17
Remark: I noticed that on Intel boards sensor 2 is used for the CPU
and 4 is ignored/stuck, on AMD boards sensor 4 is the CPU and sensor 2 is
either ignored or a socket temperature.
AS99127F (rev.1 and 2 alike):
- sensor 1: register 0x27
- sensor 2 & 3 are the 2 LM75's on the SMBus
Remark: Register 0x5b is suspected to be temperature type selector. Bit 1
would control temp1, bit 3 temp2 and bit 5 temp3.
Mozart-2:
- sensor 1: register 0x27
- sensor 2: register 0x13
# Fan sensors:
ASB100, AS99127F (rev.1 and 2 alike):
- 3 fans, identical to the W83781D
Mozart-2:
- 2 fans only, 1350000/RPM/div
- fan 1: register 0x28, divisor on register 0xA1 (bits 4-5)
- fan 2: register 0x29, divisor on register 0xA1 (bits 6-7)
# Voltages:
This is where there is a difference between AS99127F rev.1 and 2.
Remark: The difference is similar to the difference between
W83781D and W83782D.
ASB100:
in0=r(0x20)*0.016
in1=r(0x21)*0.016
in2=r(0x22)*0.016
in3=r(0x23)*0.016*1.68
in4=r(0x24)*0.016*3.8
in5=r(0x25)*(-0.016)*3.97
in6=r(0x26)*(-0.016)*1.666
AS99127F rev.1:
in0=r(0x20)*0.016
in1=r(0x21)*0.016
in2=r(0x22)*0.016
in3=r(0x23)*0.016*1.68
in4=r(0x24)*0.016*3.8
in5=r(0x25)*(-0.016)*3.97
in6=r(0x26)*(-0.016)*1.503
AS99127F rev.2:
in0=r(0x20)*0.016
in1=r(0x21)*0.016
in2=r(0x22)*0.016
in3=r(0x23)*0.016*1.68
in4=r(0x24)*0.016*3.8
in5=(r(0x25)*0.016-3.6)*5.14+3.6
in6=(r(0x26)*0.016-3.6)*3.14+3.6
Mozart-2:
in0=r(0x20)*0.016
in1=255
in2=r(0x22)*0.016
in3=r(0x23)*0.016*1.68
in4=r(0x24)*0.016*4
in5=255
in6=255
# PWM
Additional info about PWM on the AS99127F (may apply to other Asus
chips as well) by Jean Delvare as of 2004-04-09:
AS99127F revision 2 seems to have two PWM registers at 0x59 and 0x5A,
and a temperature sensor type selector at 0x5B (which basically means
that they swapped registers 0x59 and 0x5B when you compare with Winbond
chips).
Revision 1 of the chip also has the temperature sensor type selector at
0x5B, but PWM registers have no effect.
We don't know exactly how the temperature sensor type selection works.
Looks like bits 1-0 are for temp1, bits 3-2 for temp2 and bits 5-4 for
temp3, although it is possible that only the most significant bit matters
each time. So far, values other than 0 always broke the readings.
PWM registers seem to be split in two parts: bit 7 is a mode selector,
while the other bits seem to define a value or threshold.
When bit 7 is clear, bits 6-0 seem to hold a threshold value. If the value
is below a given limit, the fan runs at low speed. If the value is above
the limit, the fan runs at full speed. We have no clue as to what the limit
represents. Note that there seem to be some inertia in this mode, speed
changes may need some time to trigger. Also, an hysteresis mechanism is
suspected since walking through all the values increasingly and then
decreasingly led to slightly different limits.
When bit 7 is set, bits 3-0 seem to hold a threshold value, while bits 6-4
would not be significant. If the value is below a given limit, the fan runs
at full speed, while if it is above the limit it runs at low speed (so this
is the contrary of the other mode, in a way). Here again, we don't know
what the limit is supposed to represent.
One remarkable thing is that the fans would only have two or three
different speeds (transitional states left apart), not a whole range as
you usually get with PWM.
As a conclusion, you can write 0x00 or 0x8F to the PWM registers to make
fans run at low speed, and 0x7F or 0x80 to make them run at full speed.
Please contact us if you can figure out how it is supposed to work. As
long as we don't know more, the w83781d driver doesn't handle PWM on
AS99127F chips at all.
Additional info about PWM on the AS99127F rev.1 by Hector Martin:
I've been fiddling around with the (in)famous 0x59 register and
found out the following values do work as a form of coarse pwm:
0x80 - seems to turn fans off after some time(1-2 minutes)... might be
some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an
old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attemp at Qfan
that was dropped at the BIOS)
0x81 - off
0x82 - slightly "on-ner" than off, but my fans do not get to move. I can
hear the high-pitched PWM sound that motors give off at too-low-pwm.
0x83 - now they do move. Estimate about 70% speed or so.
0x84-0x8f - full on
Changing the high nibble doesn't seem to do much except the high bit
(0x80) must be set for PWM to work, else the current pwm doesn't seem to
change.
My mobo is an ASUS A7V266-E. This behavior is similar to what I got
with speedfan under Windows, where 0-15% would be off, 15-2x% (can't
remember the exact value) would be 70% and higher would be full on.

View File

@ -0,0 +1,39 @@
Kernel driver w83l785ts
=======================
Supported chips:
* Winbond W83L785TS-S
Prefix: 'w83l785ts'
Addresses scanned: I2C 0x2e
Datasheet: Publicly available at the Winbond USA website
http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
Authors:
Jean Delvare <khali@linux-fr.org>
Description
-----------
The W83L785TS-S is a digital temperature sensor. It senses the
temperature of a single external diode. The high limit is
theoretically defined as 85 or 100 degrees C through a combination
of external resistors, so the user cannot change it. Values seen so
far suggest that the two possible limits are actually 95 and 110
degrees C. The datasheet is rather poor and obviously inaccurate
on several points including this one.
All temperature values are given in degrees Celsius. Resolution
is 1.0 degree. See the datasheet for details.
The w83l785ts driver will not update its values more frequently than
every other second; reading them more often will do no harm, but will
return 'old' values.
Known Issues
------------
On some systems (Asus), the BIOS is known to interfere with the driver
and cause read errors. The driver will retry a given number of times
(5 by default) and then give up, returning the old value (or 0 if
there is no old value). It seems to work well enough so that you should
not notice anything. Thanks to James Bolt for helping test this feature.

View File

@ -57,7 +57,7 @@ Technical changes:
Documentation/i2c/sysfs-interface for the individual files. Also
convert the units these files read and write to the specified ones.
If you need to add a new type of file, please discuss it on the
sensors mailing list <sensors@stimpy.netroedge.com> by providing a
sensors mailing list <lm-sensors@lm-sensors.org> by providing a
patch to the Documentation/i2c/sysfs-interface file.
* [Attach] For I2C drivers, the attach function should make sure

View File

@ -0,0 +1,39 @@
Introduction
------------
Most mainboards have sensor chips to monitor system health (like temperatures,
voltages, fans speed). They are often connected through an I2C bus, but some
are also connected directly through the ISA bus.
The kernel drivers make the data from the sensor chips available in the /sys
virtual filesystem. Userspace tools are then used to display or set or the
data in a more friendly manner.
Lm-sensors
----------
Core set of utilites that will allow you to obtain health information,
setup monitoring limits etc. You can get them on their homepage
http://www.lm-sensors.nu/ or as a package from your Linux distribution.
If from website:
Get lmsensors from project web site. Please note, you need only userspace
part, so compile with "make user_install" target.
General hints to get things working:
0) get lm-sensors userspace utils
1) compile all drivers in I2C section as modules in your kernel
2) run sensors-detect script, it will tell you what modules you need to load.
3) load them and run "sensors" command, you should see some results.
4) fix sensors.conf, labels, limits, fan divisors
5) if any more problems consult FAQ, or documentation
Other utilites
--------------
If you want some graphical indicators of system health look for applications
like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
hardware-monitor
If you are server administrator you can try snmpd or mrtgutils.

View File

@ -171,45 +171,31 @@ The following lists are used internally:
normal_i2c: filled in by the module writer.
A list of I2C addresses which should normally be examined.
normal_i2c_range: filled in by the module writer.
A list of pairs of I2C addresses, each pair being an inclusive range of
addresses which should normally be examined.
probe: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the address. These addresses are also probed, as if they
were in the 'normal' list.
probe_range: insmod parameter.
A list of triples. The first value is a bus number (-1 for any I2C bus),
the second and third are addresses. These form an inclusive range of
addresses that are also probed, as if they were in the 'normal' list.
ignore: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. These addresses are never probed.
This parameter overrules 'normal' and 'probe', but not the 'force' lists.
ignore_range: insmod parameter.
A list of triples. The first value is a bus number (-1 for any I2C bus),
the second and third are addresses. These form an inclusive range of
I2C addresses that are never probed.
This parameter overrules 'normal' and 'probe', but not the 'force' lists.
force: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. A device is blindly assumed to be on
the given address, no probing is done.
Fortunately, as a module writer, you just have to define the `normal'
and/or `normal_range' parameters. The complete declaration could look
like this:
Fortunately, as a module writer, you just have to define the `normal_i2c'
parameter. The complete declaration could look like this:
/* Scan 0x20 to 0x2f, 0x37, and 0x40 to 0x4f */
static unsigned short normal_i2c[] = { 0x37,I2C_CLIENT_END };
static unsigned short normal_i2c_range[] = { 0x20, 0x2f, 0x40, 0x4f,
I2C_CLIENT_END };
/* Scan 0x37, and 0x48 to 0x4f */
static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
Note that you *have* to call the two defined variables `normal_i2c' and
`normal_i2c_range', without any prefix!
Note that you *have* to call the defined variable `normal_i2c',
without any prefix!
Probing classes (sensors)
@ -223,39 +209,17 @@ The following lists are used internally. They are all lists of integers.
normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END.
A list of I2C addresses which should normally be examined.
normal_i2c_range: filled in by the module writer. Terminated by
SENSORS_I2C_END
A list of pairs of I2C addresses, each pair being an inclusive range of
addresses which should normally be examined.
normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
A list of ISA addresses which should normally be examined.
normal_isa_range: filled in by the module writer. Terminated by
SENSORS_ISA_END
A list of triples. The first two elements are ISA addresses, being an
range of addresses which should normally be examined. The third is the
modulo parameter: only addresses which are 0 module this value relative
to the first address of the range are actually considered.
probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the address. These
addresses are also probed, as if they were in the 'normal' list.
probe_range: insmod parameter. Initialize this list with SENSORS_I2C_END
values.
A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second and third are addresses.
These form an inclusive range of addresses that are also probed, as
if they were in the 'normal' list.
ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values.
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the I2C address. These
addresses are never probed. This parameter overrules 'normal' and
'probe', but not the 'force' lists.
ignore_range: insmod parameter. Initialize this list with SENSORS_I2C_END
values.
A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second and third are addresses.
These form an inclusive range of I2C addresses that are never probed.
This parameter overrules 'normal' and 'probe', but not the 'force' lists.
Also used is a list of pointers to sensors_force_data structures:
force_data: insmod parameters. A list, ending with an element of which
@ -269,16 +233,14 @@ Also used is a list of pointers to sensors_force_data structures:
So we have a generic insmod variabled `force', and chip-specific variables
`force_CHIPNAME'.
Fortunately, as a module writer, you just have to define the `normal'
and/or `normal_range' parameters, and define what chip names are used.
Fortunately, as a module writer, you just have to define the `normal_i2c'
and `normal_isa' parameters, and define what chip names are used.
The complete declaration could look like this:
/* Scan i2c addresses 0x20 to 0x2f, 0x37, and 0x40 to 0x4f
static unsigned short normal_i2c[] = {0x37,SENSORS_I2C_END};
static unsigned short normal_i2c_range[] = {0x20,0x2f,0x40,0x4f,
SENSORS_I2C_END};
/* Scan i2c addresses 0x37, and 0x48 to 0x4f */
static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Scan ISA address 0x290 */
static unsigned int normal_isa[] = {0x0290,SENSORS_ISA_END};
static unsigned int normal_isa_range[] = {SENSORS_ISA_END};
/* Define chips foo and bar, as well as all module parameters and things */
SENSORS_INSMOD_2(foo,bar);

View File

@ -1,21 +1,21 @@
Generic HDLC layer
Krzysztof Halasa <khc@pm.waw.pl>
January, 2003
Generic HDLC layer currently supports:
- Frame Relay (ANSI, CCITT and no LMI), with ARP support (no InARP).
Normal (routed) and Ethernet-bridged (Ethernet device emulation)
interfaces can share a single PVC.
- raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
- Cisco HDLC,
- PPP (uses syncppp.c),
- X.25 (uses X.25 routines).
1. Frame Relay (ANSI, CCITT, Cisco and no LMI).
- Normal (routed) and Ethernet-bridged (Ethernet device emulation)
interfaces can share a single PVC.
- ARP support (no InARP support in the kernel - there is an
experimental InARP user-space daemon available on:
http://www.kernel.org/pub/linux/utils/net/hdlc/).
2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
3. Cisco HDLC.
4. PPP (uses syncppp.c).
5. X.25 (uses X.25 routines).
There are hardware drivers for the following cards:
- C101 by Moxa Technologies Co., Ltd.
- RISCom/N2 by SDL Communications Inc.
- and others, some not in the official kernel.
Generic HDLC is a protocol driver only - it needs a low-level driver
for your particular hardware.
Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible
with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
@ -24,7 +24,7 @@ with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
Make sure the hdlc.o and the hardware driver are loaded. It should
create a number of "hdlc" (hdlc0 etc) network devices, one for each
WAN port. You'll need the "sethdlc" utility, get it from:
http://hq.pm.waw.pl/hdlc/
http://www.kernel.org/pub/linux/utils/net/hdlc/
Compile sethdlc.c utility:
gcc -O2 -Wall -o sethdlc sethdlc.c
@ -52,12 +52,12 @@ Setting interface:
* v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port
if the card has software-selectable interfaces
loopback - activate hardware loopback (for testing only)
* clock ext - external clock (uses DTE RX and TX clock)
* clock int - internal clock (provides clock signal on DCE clock output)
* clock txint - TX internal, RX external (provides TX clock on DCE output)
* clock txfromrx - TX clock derived from RX clock (TX clock on DCE output)
* rate - sets clock rate in bps (not required for external clock or
for txfromrx)
* clock ext - both RX clock and TX clock external
* clock int - both RX clock and TX clock internal
* clock txint - RX clock external, TX clock internal
* clock txfromrx - RX clock external, TX clock derived from RX clock
* rate - sets clock rate in bps (for "int" or "txint" clock only)
Setting protocol:
@ -79,7 +79,7 @@ Setting protocol:
* x25 - sets X.25 mode
* fr - Frame Relay mode
lmi ansi / ccitt / none - LMI (link management) type
lmi ansi / ccitt / cisco / none - LMI (link management) type
dce - Frame Relay DCE (network) side LMI instead of default DTE (user).
It has nothing to do with clocks!
t391 - link integrity verification polling timer (in seconds) - user
@ -119,13 +119,14 @@ or
If you have a problem with N2 or C101 card, you can issue the "private"
command to see port's packet descriptor rings (in kernel logs):
If you have a problem with N2, C101 or PLX200SYN card, you can issue the
"private" command to see port's packet descriptor rings (in kernel logs):
sethdlc hdlc0 private
The hardware driver has to be build with CONFIG_HDLC_DEBUG_RINGS.
The hardware driver has to be build with #define DEBUG_RINGS.
Attaching this info to bug reports would be helpful. Anyway, let me know
if you have problems using this.
For patches and other info look at http://hq.pm.waw.pl/hdlc/
For patches and other info look at:
<http://www.kernel.org/pub/linux/utils/net/hdlc/>.

View File

@ -47,7 +47,6 @@ ni52 <------------------ Buggy ------------------>
ni65 YES YES YES Software(#)
seeq NO NO NO N/A
sgiseek <------------------ Buggy ------------------>
sk_g16 NO NO YES N/A
smc-ultra YES YES YES Hardware
sunlance YES YES YES Hardware
tulip YES YES YES Hardware

View File

@ -284,9 +284,6 @@ ppp.c:
seeq8005.c: *Not modularized*
(Probes ports: 0x300, 0x320, 0x340, 0x360)
sk_g16.c: *Not modularized*
(Probes ports: 0x100, 0x180, 0x208, 0x220m 0x288, 0x320, 0x328, 0x390)
skeleton.c: *Skeleton*
slhc.c:

View File

@ -12,7 +12,7 @@ Don is no longer the prime maintainer of this version of the driver.
Please report problems to one or more of:
Andrew Morton <andrewm@uow.edu.au>
Netdev mailing list <netdev@oss.sgi.com>
Netdev mailing list <netdev@vger.kernel.org>
Linux kernel mailing list <linux-kernel@vger.kernel.org>
Please note the 'Reporting and Diagnosing Problems' section at the end

View File

@ -207,27 +207,6 @@ SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
#READY_AFTER_RESUME
#
Driver Detach Power Management
The kernel now supports the ability to place a device in a low-power
state when it is detached from its driver, which happens when its
module is removed.
Each device contains a 'detach_state' file in its sysfs directory
which can be used to control this state. Reading from this file
displays what the current detach state is set to. This is 0 (On) by
default. A user may write a positive integer value to this file in the
range of 1-4 inclusive.
A value of 1-3 will indicate the device should be placed in that
low-power state, which will cause ->suspend() to be called for that
device. A value of 4 indicates that the device should be shutdown, so
->shutdown() will be called for that device.
The driver is responsible for reinitializing the device when the
module is re-inserted during it's ->probe() (or equivalent) method.
The driver core will not call any extra functions when binding the
device to the driver.
pm_message_t meaning

View File

@ -347,8 +347,8 @@ address that is created by firmware. An example vty-server sysfs entry
looks like the following:
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
. current_vty devspec name partner_vtys
.. detach_state index partner_clcs vterm_state
. current_vty devspec name partner_vtys
.. index partner_clcs vterm_state
Each entry is provided, by default with a "name" attribute. Reading the
"name" attribute will reveal the device type as shown in the following

View File

@ -30,7 +30,7 @@ Command line parameters
device numbers (0xabcd or abcd, for 2.4 backward compatibility).
You can use the 'all' keyword to ignore all devices.
The '!' operator will cause the I/O-layer to _not_ ignore a device.
The order on the command line is not important.
The command line is parsed from left to right.
For example,
cio_ignore=0.0.0023-0.0.0042,0.0.4711
@ -72,13 +72,14 @@ Command line parameters
/proc/cio_ignore; "add <device range>, <device range>, ..." will ignore the
specified devices.
Note: Already known devices cannot be ignored.
Note: While already known devices can be added to the list of devices to be
ignored, there will be no effect on then. However, if such a device
disappears and then reappeares, it will then be ignored.
For example, if device 0.0.abcd is already known and all other devices
0.0.a000-0.0.afff are not known,
For example,
"echo add 0.0.a000-0.0.accc, 0.0.af00-0.0.afff > /proc/cio_ignore"
will add 0.0.a000-0.0.abcc, 0.0.abce-0.0.accc and 0.0.af00-0.0.afff to the
list of ignored devices and skip 0.0.abcd.
will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored
devices.
The devices can be specified either by bus id (0.0.abcd) or, for 2.4 backward
compatibilty, by the device number in hexadecimal (0xabcd or abcd).
@ -98,7 +99,8 @@ Command line parameters
- /proc/s390dbf/cio_trace/hex_ascii
Logs the calling of functions in the common I/O-layer and, if applicable,
which subchannel they were called for.
which subchannel they were called for, as well as dumps of some data
structures (like irb in an error case).
The level of logging can be changed to be more or less verbose by piping to
/proc/s390dbf/cio_*/level a number between 0 and 6; see the documentation on

View File

@ -1,3 +1,69 @@
Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
1. Added IOCTL backward compatibility.
Convert megaraid_mm driver to new compat_ioctl entry points.
I don't have easy access to hardware, so only compile tested.
- Signed-off-by:Andi Kleen <ak@muc.de>
2. megaraid_mbox fix: wrong order of arguments in memset()
That, BTW, shows why cross-builds are useful-the only indication of
problem had been a new warning showing up in sparse output on alpha
build (number of exceeding 256 got truncated).
- Signed-off-by: Al Viro
<viro@parcelfarce.linux.theplanet.co.uk>
3. Convert pci_module_init to pci_register_driver
Convert from pci_module_init to pci_register_driver
(from:http://kerneljanitors.org/TODO)
- Signed-off-by: Domen Puncer <domen@coderock.org>
4. Use the pre defined DMA mask constants from dma-mapping.h
Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistend_dma_mask(). See
http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for more
details.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Domen Puncer <domen@coderock.org>
5. Remove SSID checking for Dobson, Lindsay, and Verde based products.
Checking the SSVID/SSID for controllers which have Dobson, Lindsay,
and Verde is unnecessary because device ID has been assigned by LSI
and it is unique value. So, all controllers with these IOPs have to be
supported by the driver regardless SSVID/SSID.
6. Date Thu, 27 Jan 2005 04:31:09 +0100
From Herbert Poetzl <>
Subject RFC: assert_spin_locked() for 2.6
Greetings!
overcautious programming will kill your kernel ;)
ever thought about checking a spin_lock or even
asserting that it must be held (maybe just for
spinlock debugging?) ...
there are several checks present in the kernel
where somebody does a variation on the following:
BUG_ON(!spin_is_locked(&some_lock));
so what's wrong about that? nothing, unless you
compile the code with CONFIG_DEBUG_SPINLOCK but
without CONFIG_SMP ... in which case the BUG()
will kill your kernel ...
maybe it's not advised to make such assertions,
but here is a solution which works for me ...
(compile tested for sh, x86_64 and x86, boot/run
tested for x86 only)
best,
Herbert
- Herbert Poetzl <herbert@13thfloor.at>, Thu, 27 Jan 2005
Release Date : Thu Feb 03 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
Older Version : 2.20.4.4 (scsi module), 2.20.2.4 (cmm module)

View File

@ -0,0 +1,180 @@
README for the SCSI media changer driver
========================================
This is a driver for SCSI Medium Changer devices, which are listed
with "Type: Medium Changer" in /proc/scsi/scsi.
This is for *real* Jukeboxes. It is *not* supported to work with
common small CD-ROM changers, neither one-lun-per-slot SCSI changers
nor IDE drives.
Userland tools available from here:
http://linux.bytesex.org/misc/changer.html
General Information
-------------------
First some words about how changers work: A changer has 2 (possibly
more) SCSI ID's. One for the changer device which controls the robot,
and one for the device which actually reads and writes the data. The
later may be anything, a MOD, a CD-ROM, a tape or whatever. For the
changer device this is a "don't care", he *only* shuffles around the
media, nothing else.
The SCSI changer model is complex, compared to - for example - IDE-CD
changers. But it allows to handle nearly all possible cases. It knows
4 different types of changer elements:
media transport - this one shuffles around the media, i.e. the
transport arm. Also known as "picker".
storage - a slot which can hold a media.
import/export - the same as above, but is accessable from outside,
i.e. there the operator (you !) can use this to
fill in and remove media from the changer.
Sometimes named "mailslot".
data transfer - this is the device which reads/writes, i.e. the
CD-ROM / Tape / whatever drive.
None of these is limited to one: A huge Jukebox could have slots for
123 CD-ROM's, 5 CD-ROM readers (and therefore 6 SCSI ID's: the changer
and each CD-ROM) and 2 transport arms. No problem to handle.
How it is implemented
---------------------
I implemented the driver as character device driver with a NetBSD-like
ioctl interface. Just grabbed NetBSD's header file and one of the
other linux SCSI device drivers as starting point. The interface
should be source code compatible with NetBSD. So if there is any
software (anybody knows ???) which supports a BSDish changer driver,
it should work with this driver too.
Over time a few more ioctls where added, volume tag support for example
wasn't covered by the NetBSD ioctl API.
Current State
-------------
Support for more than one transport arm is not implemented yet (and
nobody asked for it so far...).
I test and use the driver myself with a 35 slot cdrom jukebox from
Grundig. I got some reports telling it works ok with tape autoloaders
(Exabyte, HP and DEC). Some People use this driver with amanda. It
works fine with small (11 slots) and a huge (4 MOs, 88 slots)
magneto-optical Jukebox. Probably with lots of other changers too, most
(but not all :-) people mail me only if it does *not* work...
I don't have any device lists, neither black-list nor white-list. Thus
it is quite useless to ask me whenever a specific device is supported or
not. In theory every changer device which supports the SCSI-2 media
changer command set should work out-of-the-box with this driver. If it
doesn't, it is a bug. Either within the driver or within the firmware
of the changer device.
Using it
--------
This is a character device with major number is 86, so use
"mknod /dev/sch0 c 86 0" to create the special file for the driver.
If the module finds the changer, it prints some messages about the
device [ try "dmesg" if you don't see anything ] and should show up in
/proc/devices. If not.... some changers use ID ? / LUN 0 for the
device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
look for LUN's other than 0 as default, becauce there are to many
broken devices. So you can try:
1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
(replace ID with the SCSI-ID of the device)
2) boot the kernel with "max_scsi_luns=1" on the command line
(append="max_scsi_luns=1" in lilo.conf should do the trick)
Trouble?
--------
If you insmod the driver with "insmod debug=1", it will be verbose and
prints a lot of stuff to the syslog. Compiling the kernel with
CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot
because the kernel will translate the error codes into human-readable
strings then.
You can display these messages with the dmesg command (or check the
logfiles). If you email me some question becauce of a problem with the
driver, please include these messages.
Insmod options
--------------
debug=0/1
Enable debug messages (see above, default: 0).
verbose=0/1
Be verbose (default: 1).
init=0/1
Send INITIALIZE ELEMENT STATUS command to the changer
at insmod time (default: 1).
timeout_init=<seconds>
timeout for the INITIALIZE ELEMENT STATUS command
(default: 3600).
timeout_move=<seconds>
timeout for all other commands (default: 120).
dt_id=<id1>,<id2>,...
dt_lun=<lun1>,<lun2>,...
These two allow to specify the SCSI ID and LUN for the data
transfer elements. You likely don't need this as the jukebox
should provide this information. But some devices don't ...
vendor_firsts=
vendor_counts=
vendor_labels=
These insmod options can be used to tell the driver that there
are some vendor-specific element types. Grundig for example
does this. Some jukeboxes have a printer to label fresh burned
CDs, which is addressed as element 0xc000 (type 5). To tell the
driver about this vendor-specific element, use this:
$ insmod ch \
vendor_firsts=0xc000 \
vendor_counts=1 \
vendor_labels=printer
All three insmod options accept up to four comma-separated
values, this way you can configure the element types 5-8.
You likely need the SCSI specs for the device in question to
find the correct values as they are not covered by the SCSI-2
standard.
Credits
-------
I wrote this driver using the famous mailing-patches-around-the-world
method. With (more or less) help from:
Daniel Moehwald <moehwald@hdg.de>
Dane Jasper <dane@sonic.net>
R. Scott Bailey <sbailey@dsddi.eds.com>
Jonathan Corbet <corbet@lwn.net>
Special thanks go to
Martin Kuehne <martin.kuehne@bnbt.de>
for a old, second-hand (but full functional) cdrom jukebox which I use
to develop/test driver and tools now.
Have fun,
Gerd
--
Gerd Knorr <kraxel@bytesex.org>

View File

@ -936,8 +936,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
* Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
* and assumed to be held on return.
* Locks: None held
*
* Calling context: kernel thread
*
@ -955,8 +954,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
* Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
* and assumed to be held on return.
* Locks: None held
*
* Calling context: kernel thread
*
@ -974,8 +972,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
* Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
* and assumed to be held on return.
* Locks: None held
*
* Calling context: kernel thread
*
@ -993,8 +990,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
* Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
* and assumed to be held on return.
* Locks: None held
*
* Calling context: kernel thread
*

View File

@ -0,0 +1,45 @@
The SGI IOC4 PCI device is a bit of a strange beast, so some notes on
it are in order.
First, even though the IOC4 performs multiple functions, such as an
IDE controller, a serial controller, a PS/2 keyboard/mouse controller,
and an external interrupt mechanism, it's not implemented as a
multifunction device. The consequence of this from a software
standpoint is that all these functions share a single IRQ, and
they can't all register to own the same PCI device ID. To make
matters a bit worse, some of the register blocks (and even registers
themselves) present in IOC4 are mixed-purpose between these several
functions, meaning that there's no clear "owning" device driver.
The solution is to organize the IOC4 driver into several independent
drivers, "ioc4", "sgiioc4", and "ioc4_serial". Note that there is no
PS/2 controller driver as this functionality has never been wired up
on a shipping IO card.
ioc4
====
This is the core (or shim) driver for IOC4. It is responsible for
initializing the basic functionality of the chip, and allocating
the PCI resources that are shared between the IOC4 functions.
This driver also provides registration functions that the other
IOC4 drivers can call to make their presence known. Each driver
needs to provide a probe and remove function, which are invoked
by the core driver at appropriate times. The interface of these
IOC4 function probe and remove operations isn't precisely the same
as PCI device probe and remove operations, but is logically the
same operation.
sgiioc4
=======
This is the IDE driver for IOC4. Its name isn't very descriptive
simply for historical reasons (it used to be the only IOC4 driver
component). There's not much to say about it other than it hooks
up to the ioc4 driver via the appropriate registration, probe, and
remove functions.
ioc4_serial
===========
This is the serial driver for IOC4. There's not much to say about it
other than it hooks up to the ioc4 driver via the appropriate registration,
probe, and remove functions.

View File

@ -615,9 +615,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-hda-intel
--------------------
Module for Intel HD Audio (ICH6, ICH6M, ICH7)
Module for Intel HD Audio (ICH6, ICH6M, ICH7), ATI SB450,
VIA VT8251/VT8237A
model - force the model name
position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF)
Module supports up to 8 cards.
@ -635,6 +637,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
5stack 5-jack in back, 2-jack in front
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
w810 3-jack
z71v 3-jack (HP shared SPDIF)
asus 3-jack
uniwill 3-jack
F1734 2-jack
CMI9880
minimal 3-jack in back
@ -642,6 +648,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
full 6-jack in back, 2-jack in front
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)
Note 2: If you get click noises on output, try the module option
position_fix=1 or 2. position_fix=1 will use the SD_LPIB
register value without FIFO size correction as the current
DMA pointer. position_fix=2 will make the driver to use
the position buffer instead of reading SD_LPIB register.
(Usually SD_LPLIB register is more accurate than the
position buffer.)
Module snd-hdsp
---------------
@ -660,7 +675,19 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
module did formerly. It will allocate the buffers in advance
when any HDSP cards are found. To make the buffer
allocation sure, load snd-page-alloc module in the early
stage of boot sequence.
stage of boot sequence. See "Early Buffer Allocation"
section.
Module snd-hdspm
----------------
Module for RME HDSP MADI board.
precise_ptr - Enable precise pointer, or disable.
line_outs_monitor - Send playback streams to analog outs by default.
enable_monitor - Enable Analog Out on Channel 63/64 by default.
See hdspm.txt for details.
Module snd-ice1712
------------------
@ -677,15 +704,19 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* TerraTec EWS 88D
* TerraTec EWX 24/96
* TerraTec DMX 6Fire
* TerraTec Phase 88
* Hoontech SoundTrack DSP 24
* Hoontech SoundTrack DSP 24 Value
* Hoontech SoundTrack DSP 24 Media 7.1
* Event Electronics, EZ8
* Digigram VX442
* Lionstracs, Mediastaton
model - Use the given board model, one of the following:
delta1010, dio2496, delta66, delta44, audiophile, delta410,
delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
dmx6fire, dsp24, dsp24_value, dsp24_71, ez8
dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
phase88, mediastation
omni - Omni I/O support for MidiMan M-Audio Delta44/66
cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transciever)
in msec resolution, default value is 500 (0.5 sec)
@ -694,20 +725,46 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
is not used with all Envy24 based cards (for example in the MidiMan Delta
serie).
Note: The supported board is detected by reading EEPROM or PCI
SSID (if EEPROM isn't available). You can override the
model by passing "model" module option in case that the
driver isn't configured properly or you want to try another
type for testing.
Module snd-ice1724
------------------
Module for Envy24HT (VT/ICE1724) based PCI sound cards.
Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
* MidiMan M Audio Revolution 7.1
* AMP Ltd AUDIO2000
* TerraTec Aureon Sky-5.1, Space-7.1
* TerraTec Aureon 5.1 Sky
* TerraTec Aureon 7.1 Space
* TerraTec Aureon 7.1 Universe
* TerraTec Phase 22
* TerraTec Phase 28
* AudioTrak Prodigy 7.1
* AudioTrak Prodigy 192
* Pontis MS300
* Albatron K8X800 Pro II
* Chaintech ZNF3-150
* Chaintech ZNF3-250
* Chaintech 9CJS
* Chaintech AV-710
* Shuttle SN25P
model - Use the given board model, one of the following:
revo71, amp2000, prodigy71, aureon51, aureon71,
k8x800
revo71, amp2000, prodigy71, prodigy192, aureon51,
aureon71, universe, k8x800, phase22, phase28, ms300,
av710
Module supports up to 8 cards and autoprobe.
Note: The supported board is detected by reading EEPROM or PCI
SSID (if EEPROM isn't available). You can override the
model by passing "model" module option in case that the
driver isn't configured properly or you want to try another
type for testing.
Module snd-intel8x0
-------------------
@ -1026,7 +1083,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
module did formerly. It will allocate the buffers in advance
when any RME9652 cards are found. To make the buffer
allocation sure, load snd-page-alloc module in the early
stage of boot sequence.
stage of boot sequence. See "Early Buffer Allocation"
section.
Module snd-sa11xx-uda1341 (on arm only)
---------------------------------------
@ -1211,16 +1269,18 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
------------------
Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
8233A, 8233C, 8235 (south) bridge.
8233A, 8233C, 8235, 8237 (south) bridge.
mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
[VIA686A/686B only]
joystick - Enable joystick (default off) [VIA686A/686B only]
ac97_clock - AC'97 codec clock base (default 48000Hz)
dxs_support - support DXS channels,
0 = auto (defalut), 1 = enable, 2 = disable,
3 = 48k only, 4 = no VRA
[VIA8233/C,8235 only]
0 = auto (default), 1 = enable, 2 = disable,
3 = 48k only, 4 = no VRA, 5 = enable any sample
rate and different sample rates on different
channels
[VIA8233/C, 8235, 8237 only]
ac97_quirk - AC'97 workaround for strange hardware
See the description of intel8x0 module for details.
@ -1232,18 +1292,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
default value 1.4. Then the interrupt number will be
assigned under 15. You might also upgrade your BIOS.
Note: VIA8233/5 (not VIA8233A) can support DXS (direct sound)
Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
channels as the first PCM. On these channels, up to 4
streams can be played at the same time.
streams can be played at the same time, and the controller
can perform sample rate conversion with separate rates for
each channel.
As default (dxs_support = 0), 48k fixed rate is chosen
except for the known devices since the output is often
noisy except for 48k on some mother boards due to the
bug of BIOS.
Please try once dxs_support=1 and if it works on other
Please try once dxs_support=5 and if it works on other
sample rates (e.g. 44.1kHz of mp3 playback), please let us
know the PCI subsystem vendor/device id's (output of
"lspci -nv").
If it doesn't work, try dxs_support=4. If it still doesn't
If dxs_support=5 does not work, try dxs_support=4; if it
doesn't work too, try dxs_support=1. (dxs_support=1 is
usually for old motherboards. The correct implementated
board should work with 4 or 5.) If it still doesn't
work and the default setting is ok, dxs_support=3 is the
right choice. If the default setting doesn't work at all,
try dxs_support=2 to disable the DXS channels.
@ -1497,6 +1562,36 @@ Proc interfaces (/proc/asound)
echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
Early Buffer Allocation
=======================
Some drivers (e.g. hdsp) require the large contiguous buffers, and
sometimes it's too late to find such spaces when the driver module is
actually loaded due to memory fragmentation. You can pre-allocate the
PCM buffers by loading snd-page-alloc module and write commands to its
proc file in prior, for example, in the early boot stage like
/etc/init.d/*.local scripts.
Reading the proc file /proc/drivers/snd-page-alloc shows the current
usage of page allocation. In writing, you can send the following
commands to the snd-page-alloc driver:
- add VENDOR DEVICE MASK SIZE BUFFERS
VENDOR and DEVICE are PCI vendor and device IDs. They take
integer numbers (0x prefix is needed for the hex).
MASK is the PCI DMA mask. Pass 0 if not restricted.
SIZE is the size of each buffer to allocate. You can pass
k and m suffix for KB and MB. The max number is 16MB.
BUFFERS is the number of buffers to allocate. It must be greater
than 0. The max number is 4.
- erase
This will erase the all pre-allocated buffers which are not in
use.
Links
=====

View File

@ -89,19 +89,22 @@ and use the interleaved 4 channel data.
There are some control switchs affecting to the speaker connections:
"Line-In As Rear" - As mentioned above, the line-in jack is used
for the rear (3th and 4th channels) output.
"Line-In As Bass" - The line-in jack is used for the bass (5th
and 6th channels) output.
"Mic As Center/LFE" - The mic jack is used for the bass output.
If this switch is on, you cannot use a microphone as a capture
source, of course.
"Line-In Mode" - an enum control to change the behavior of line-in
jack. Either "Line-In", "Rear Output" or "Bass Output" can
be selected. The last item is available only with model 039
or newer.
When "Rear Output" is chosen, the surround channels 3 and 4
are output to line-in jack.
"Mic-In Mode" - an enum control to change the behavior of mic-in
jack. Either "Mic-In" or "Center/LFE Output" can be
selected.
When "Center/LFE Output" is chosen, the center and bass
channels (channels 5 and 6) are output to mic-in jack.
Digital I/O
-----------
The CM8x38 provides the excellent SPDIF capability with very chip
The CM8x38 provides the excellent SPDIF capability with very cheap
price (yes, that's the reason I bought the card :)
The SPDIF playback and capture are done via the third PCM device
@ -122,8 +125,9 @@ respectively, so you cannot playback both analog and digital streams
simultaneously.
To enable SPDIF output, you need to turn on "IEC958 Output Switch"
control via mixer or alsactl. Then you'll see the red light on from
the card so you know that's working obviously :)
control via mixer or alsactl ("IEC958" is the official name of
so-called S/PDIF). Then you'll see the red light on from the card so
you know that's working obviously :)
The SPDIF input is always enabled, so you can hear SPDIF input data
from line-out with "IEC958 In Monitor" switch at any time (see
below).
@ -205,9 +209,10 @@ In addition to the standard SB mixer, CM8x38 provides more functions.
MIDI CONTROLLER
---------------
The MPU401-UART interface is enabled as default only for the first
(CMIPCI) card. You need to set module option "midi_port" properly
for the 2nd (CMIPCI) card.
The MPU401-UART interface is disabled as default. You need to set
module option "mpu_port" with a valid I/O port address to enable the
MIDI support. The valid I/O ports are 0x300, 0x310, 0x320 and 0x330.
Choose the value which doesn't conflict with other cards.
There is _no_ hardware wavetable function on this chip (except for
OPL3 synth below).
@ -229,9 +234,11 @@ I don't know why..
Joystick and Modem
------------------
The joystick and modem should be available by enabling the control
switch "Joystick" and "Modem" respectively. But I myself have never
tested them yet.
The legacy joystick is supported. To enable the joystick support, pass
joystick_port=1 module option. The value 1 means the auto-detection.
If the auto-detection fails, try to pass the exact I/O address.
The modem is enabled dynamically via a card control switch "Modem".
Debugging Information

View File

@ -371,7 +371,7 @@
<listitem><para>create <function>probe()</function> callback.</para></listitem>
<listitem><para>create <function>remove()</function> callback.</para></listitem>
<listitem><para>create pci_driver table which contains the three pointers above.</para></listitem>
<listitem><para>create <function>init()</function> function just calling <function>pci_module_init()</function> to register the pci_driver table defined above.</para></listitem>
<listitem><para>create <function>init()</function> function just calling <function>pci_register_driver()</function> to register the pci_driver table defined above.</para></listitem>
<listitem><para>create <function>exit()</function> function to call <function>pci_unregister_driver()</function> function.</para></listitem>
</itemizedlist>
</para>
@ -1198,7 +1198,7 @@
/* initialization of the module */
static int __init alsa_card_mychip_init(void)
{
return pci_module_init(&driver);
return pci_register_driver(&driver);
}
/* clean up the module */
@ -1654,7 +1654,7 @@
<![CDATA[
static int __init alsa_card_mychip_init(void)
{
return pci_module_init(&driver);
return pci_register_driver(&driver);
}
static void __exit alsa_card_mychip_exit(void)

View File

@ -0,0 +1,74 @@
This document is a guide to using the emu10k1 based devices with JACK for low
latency, multichannel recording functionality. All of my recent work to allow
Linux users to use the full capabilities of their hardware has been inspired
by the kX Project. Without their work I never would have discovered the true
power of this hardware.
http://www.kxproject.com
- Lee Revell, 2005.03.30
Low latency, multichannel audio with JACK and the emu10k1/emu10k2
-----------------------------------------------------------------
Until recently, emu10k1 users on Linux did not have access to the same low
latency, multichannel features offered by the "kX ASIO" feature of their
Windows driver. As of ALSA 1.0.9 this is no more!
For those unfamiliar with kX ASIO, this consists of 16 capture and 16 playback
channels. With a post 2.6.9 Linux kernel, latencies down to 64 (1.33 ms) or
even 32 (0.66ms) frames should work well.
The configuration is slightly more involved than on Windows, as you have to
select the correct device for JACK to use. Actually, for qjackctl users it's
fairly self explanatory - select Duplex, then for capture and playback select
the multichannel devices, set the in and out channels to 16, and the sample
rate to 48000Hz. The command line looks like this:
/usr/local/bin/jackd -R -dalsa -r48000 -p64 -n2 -D -Chw:0,2 -Phw:0,3 -S
This will give you 16 input ports and 16 output ports.
The 16 output ports map onto the 16 FX buses (or the first 16 of 64, for the
Audigy). The mapping from FX bus to physical output is described in
SB-Live-mixer.txt (or Audigy-mixer.txt).
The 16 input ports are connected to the 16 physical inputs. Contrary to
popular belief, all emu10k1 cards are multichannel cards. Which of these
input channels have physical inputs connected to them depends on the card
model. Trial and error is highly recommended; the pinout diagrams
for the card have been reverse engineered by some enterprising kX users and are
available on the internet. Meterbridge is helpful here, and the kX forums are
packed with useful information.
Each input port will either correspond to a digital (SPDIF) input, an analog
input, or nothing. The one exception is the SBLive! 5.1. On these devices,
the second and third input ports are wired to the center/LFE output. You will
still see 16 capture channels, but only 14 are available for recording inputs.
This chart, borrowed from kxfxlib/da_asio51.cpp, describes the mapping of JACK
ports to FXBUS2 (multitrack recording input) and EXTOUT (physical output)
channels.
/*JACK (& ASIO) mappings on 10k1 5.1 SBLive cards:
--------------------------------------------
JACK Epilog FXBUS2(nr)
--------------------------------------------
capture_1 asio14 FXBUS2(0xe)
capture_2 asio15 FXBUS2(0xf)
capture_3 asio0 FXBUS2(0x0)
~capture_4 Center EXTOUT(0x11) // mapped to by Center
~capture_5 LFE EXTOUT(0x12) // mapped to by LFE
capture_6 asio3 FXBUS2(0x3)
capture_7 asio4 FXBUS2(0x4)
capture_8 asio5 FXBUS2(0x5)
capture_9 asio6 FXBUS2(0x6)
capture_10 asio7 FXBUS2(0x7)
capture_11 asio8 FXBUS2(0x8)
capture_12 asio9 FXBUS2(0x9)
capture_13 asio10 FXBUS2(0xa)
capture_14 asio11 FXBUS2(0xb)
capture_15 asio12 FXBUS2(0xc)
capture_16 asio13 FXBUS2(0xd)
*/
TODO: describe use of ld10k1/qlo10k1 in conjunction with JACK

View File

@ -0,0 +1,362 @@
Software Interface ALSA-DSP MADI Driver
(translated from German, so no good English ;-),
2004 - winfried ritsch
Full functionality has been added to the driver. Since some of
the Controls and startup-options are ALSA-Standard and only the
special Controls are described and discussed below.
hardware functionality:
Audio transmission:
number of channels -- depends on transmission mode
The number of channels chosen is from 1..Nmax. The reason to
use for a lower number of channels is only resource allocation,
since unused DMA channels are disabled and less memory is
allocated. So also the throughput of the PCI system can be
scaled. (Only important for low performance boards).
Single Speed -- 1..64 channels
(Note: Choosing the 56channel mode for transmission or as
receiver, only 56 are transmitted/received over the MADI, but
all 64 channels are available for the mixer, so channel count
for the driver)
Double Speed -- 1..32 channels
Note: Choosing the 56-channel mode for
transmission/receive-mode , only 28 are transmitted/received
over the MADI, but all 32 channels are available for the mixer,
so channel count for the driver
Quad Speed -- 1..16 channels
Note: Choosing the 56-channel mode for
transmission/receive-mode , only 14 are transmitted/received
over the MADI, but all 16 channels are available for the mixer,
so channel count for the driver
Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE)
Sample Rates --
Single Speed -- 32000, 44100, 48000
Double Speed -- 64000, 88200, 96000 (untested)
Quad Speed -- 128000, 176400, 192000 (untested)
access-mode -- MMAP (memory mapped), Not interleaved
(PCM_NON-INTERLEAVED)
buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples
fragments -- 2
Hardware-pointer -- 2 Modi
The Card supports the readout of the actual Buffer-pointer,
where DMA reads/writes. Since of the bulk mode of PCI it is only
64 Byte accurate. SO it is not really usable for the
ALSA-mid-level functions (here the buffer-ID gives a better
result), but if MMAP is used by the application. Therefore it
can be configured at load-time with the parameter
precise-pointer.
(Hint: Experimenting I found that the pointer is maximum 64 to
large never to small. So if you subtract 64 you always have a
safe pointer for writing, which is used on this mode inside
ALSA. In theory now you can get now a latency as low as 16
Samples, which is a quarter of the interrupt possibilities.)
Precise Pointer -- off
interrupt used for pointer-calculation
Precise Pointer -- on
hardware pointer used.
Controller:
Since DSP-MADI-Mixer has 8152 Fader, it does not make sense to
use the standard mixer-controls, since this would break most of
(especially graphic) ALSA-Mixer GUIs. So Mixer control has be
provided by a 2-dimensional controller using the
hwdep-interface.
Also all 128+256 Peak and RMS-Meter can be accessed via the
hwdep-interface. Since it could be a performance problem always
copying and converting Peak and RMS-Levels even if you just need
one, I decided to export the hardware structure, so that of
needed some driver-guru can implement a memory-mapping of mixer
or peak-meters over ioctl, or also to do only copying and no
conversion. A test-application shows the usage of the controller.
Latency Controls --- not implemented !!!
Note: Within the windows-driver the latency is accessible of a
control-panel, but buffer-sizes are controlled with ALSA from
hwparams-calls and should not be changed in run-state, I did not
implement it here.
System Clock -- suspended !!!!
Name -- "System Clock Mode"
Access -- Read Write
Values -- "Master" "Slave"
!!!! This is a hardware-function but is in conflict with the
Clock-source controller, which is a kind of ALSA-standard. I
makes sense to set the card to a special mode (master at some
frequency or slave), since even not using an Audio-application
a studio should have working synchronisations setup. So use
Clock-source-controller instead !!!!
Clock Source
Name -- "Sample Clock Source"
Access -- Read Write
Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz",
"Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz",
"Internal 96.0 kHz"
Choose between Master at a specific Frequency and so also the
Speed-mode or Slave (Autosync). Also see "Preferred Sync Ref"
!!!! This is no pure hardware function but was implemented by
ALSA by some ALSA-drivers before, so I use it also. !!!
Preferred Sync Ref
Name -- "Preferred Sync Reference"
Access -- Read Write
Values -- "Word" "MADI"
Within the Auto-sync-Mode the preferred Sync Source can be
chosen. If it is not available another is used if possible.
Note: Since MADI has a much higher bit-rate than word-clock, the
card should synchronise better in MADI Mode. But since the
RME-PLL is very good, there are almost no problems with
word-clock too. I never found a difference.
TX 64 channel ---
Name -- "TX 64 channels mode"
Access -- Read Write
Values -- 0 1
Using 64-channel-modus (1) or 56-channel-modus for
MADI-transmission (0).
Note: This control is for output only. Input-mode is detected
automatically from hardware sending MADI.
Clear TMS ---
Name -- "Clear Track Marker"
Access -- Read Write
Values -- 0 1
Don't use to lower 5 Audio-bits on AES as additional Bits.
Safe Mode oder Auto Input ---
Name -- "Safe Mode"
Access -- Read Write
Values -- 0 1
(default on)
If on (1), then if either the optical or coaxial connection
has a failure, there is a takeover to the working one, with no
sample failure. Its only useful if you use the second as a
backup connection.
Input ---
Name -- "Input Select"
Access -- Read Write
Values -- optical coaxial
Choosing the Input, optical or coaxial. If Safe-mode is active,
this is the preferred Input.
-------------- Mixer ----------------------
Mixer
Name -- "Mixer"
Access -- Read Write
Values - <channel-number 0-127> <Value 0-65535>
Here as a first value the channel-index is taken to get/set the
corresponding mixer channel, where 0-63 are the input to output
fader and 64-127 the playback to outputs fader. Value 0
is channel muted 0 and 32768 an amplification of 1.
Chn 1-64
fast mixer for the ALSA-mixer utils. The diagonal of the
mixer-matrix is implemented from playback to output.
Line Out
Name -- "Line Out"
Access -- Read Write
Values -- 0 1
Switching on and off the analog out, which has nothing to do
with mixing or routing. the analog outs reflects channel 63,64.
--- information (only read access):
Sample Rate
Name -- "System Sample Rate"
Access -- Read-only
getting the sample rate.
External Rate measured
Name -- "External Rate"
Access -- Read only
Should be "Autosync Rate", but Name used is
ALSA-Scheme. External Sample frequency liked used on Autosync is
reported.
MADI Sync Status
Name -- "MADI Sync Lock Status"
Access -- Read
Values -- 0,1,2
MADI-Input is 0=Unlocked, 1=Locked, or 2=Synced.
Word Clock Sync Status
Name -- "Word Clock Lock Status"
Access -- Read
Values -- 0,1,2
Word Clock Input is 0=Unlocked, 1=Locked, or 2=Synced.
AutoSync
Name -- "AutoSync Reference"
Access -- Read
Values -- "WordClock", "MADI", "None"
Sync-Reference is either "WordClock", "MADI" or none.
RX 64ch --- noch nicht implementiert
MADI-Receiver is in 64 channel mode oder 56 channel mode.
AB_inp --- not tested
Used input for Auto-Input.
actual Buffer Position --- not implemented
!!! this is a ALSA internal function, so no control is used !!!
Calling Parameter:
index int array (min = 1, max = 8),
"Index value for RME HDSPM interface." card-index within ALSA
note: ALSA-standard
id string array (min = 1, max = 8),
"ID string for RME HDSPM interface."
note: ALSA-standard
enable int array (min = 1, max = 8),
"Enable/disable specific HDSPM sound-cards."
note: ALSA-standard
precise_ptr int array (min = 1, max = 8),
"Enable precise pointer, or disable."
note: Use only when the application supports this (which is a special case).
line_outs_monitor int array (min = 1, max = 8),
"Send playback streams to analog outs by default."
note: each playback channel is mixed to the same numbered output
channel (routed). This is against the ALSA-convention, where all
channels have to be muted on after loading the driver, but was
used before on other cards, so i historically use it again)
enable_monitor int array (min = 1, max = 8),
"Enable Analog Out on Channel 63/64 by default."
note: here the analog output is enabled (but not routed).

View File

@ -1,19 +1,92 @@
Any w1 device must be connected to w1 bus master device - for example
ds9490 usb device or w1-over-GPIO or RS232 converter.
Driver for w1 bus master must provide several functions(you can find
them in struct w1_bus_master definition in w1.h) which then will be
called by w1 core to send various commands over w1 bus(by default it is
reset and search commands). When some device is found on the bus, w1 core
checks if driver for it's family is loaded.
If driver is loaded w1 core creates new w1_slave object and registers it
in the system(creates some generic sysfs files(struct w1_family_ops in
w1_family.h), notifies any registered listener and so on...).
It is device driver's business to provide any communication method
upstream.
For example w1_therm driver(ds18?20 thermal sensor family driver)
provides temperature reading function which is bound to ->rbin() method
of the above w1_family_ops structure.
w1_smem - driver for simple 64bit memory cell provides ID reading
method.
The 1-wire (w1) subsystem
------------------------------------------------------------------
The 1-wire bus is a simple master-slave bus that communicates via a single
signal wire (plus ground, so two wires).
Devices communicate on the bus by pulling the signal to ground via an open
drain output and by sampling the logic level of the signal line.
The w1 subsystem provides the framework for managing w1 masters and
communication with slaves.
All w1 slave devices must be connected to a w1 bus master device.
Example w1 master devices:
DS9490 usb device
W1-over-GPIO
DS2482 (i2c to w1 bridge)
Emulated devices, such as a RS232 converter, parallel port adapter, etc
What does the w1 subsystem do?
------------------------------------------------------------------
When a w1 master driver registers with the w1 subsystem, the following occurs:
- sysfs entries for that w1 master are created
- the w1 bus is periodically searched for new slave devices
When a device is found on the bus, w1 core checks if driver for it's family is
loaded. If so, the family driver is attached to the slave.
If there is no driver for the family, a simple sysfs entry is created
for the slave device.
W1 device families
------------------------------------------------------------------
Slave devices are handled by a driver written for a family of w1 devices.
A family driver populates a struct w1_family_ops (see w1_family.h) and
registers with the w1 subsystem.
Current family drivers:
w1_therm - (ds18?20 thermal sensor family driver)
provides temperature reading function which is bound to ->rbin() method
of the above w1_family_ops structure.
w1_smem - driver for simple 64bit memory cell provides ID reading method.
You can call above methods by reading appropriate sysfs files.
What does a w1 master driver need to implement?
------------------------------------------------------------------
The driver for w1 bus master must provide at minimum two functions.
Emulated devices must provide the ability to set the output signal level
(write_bit) and sample the signal level (read_bit).
Devices that support the 1-wire natively must provide the ability to write and
sample a bit (touch_bit) and reset the bus (reset_bus).
Most hardware provides higher-level functions that offload w1 handling.
See struct w1_bus_master definition in w1.h for details.
w1 master sysfs interface
------------------------------------------------------------------
<xx-xxxxxxxxxxxxx> - a directory for a found device. The format is family-serial
bus - (standard) symlink to the w1 bus
driver - (standard) symlink to the w1 driver
w1_master_attempts - the number of times a search was attempted
w1_master_max_slave_count
- the maximum slaves that may be attached to a master
w1_master_name - the name of the device (w1_bus_masterX)
w1_master_search - the number of searches left to do, -1=continual (default)
w1_master_slave_count
- the number of slaves found
w1_master_slaves - the names of the slaves, one per line
w1_master_timeout - the delay in seconds between searches
If you have a w1 bus that never changes (you don't add or remove devices),
you can set w1_master_search to a positive value to disable searches.
w1 slave sysfs interface
------------------------------------------------------------------
bus - (standard) symlink to the w1 bus
driver - (standard) symlink to the w1 driver
name - the device name, usually the same as the directory name
w1_slave - (optional) a binary file whose meaning depends on the
family driver

View File

@ -25,6 +25,9 @@ APICs
noapictimer Don't set up the APIC timer
no_timer_check Don't check the IO-APIC timer. This can work around
problems with incorrect timer initialization on some boards.
Early Console
syntax: earlyprintk=vga

View File

@ -73,7 +73,7 @@ S: Status, one of the following:
3C359 NETWORK DRIVER
P: Mike Phillips
M: mikep@linuxtr.net
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@ -81,13 +81,13 @@ S: Maintained
3C505 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
3CR990 NETWORK DRIVER
P: David Dillow
M: dave@thedillows.org
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
3W-XXXX ATA-RAID CONTROLLER DRIVER
@ -130,7 +130,7 @@ S: Maintained
8169 10/100/1000 GIGABIT ETHERNET DRIVER
P: Francois Romieu
M: romieu@fr.zoreil.com
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
@ -143,7 +143,7 @@ S: Maintained
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
A2232 SERIAL BOARD DRIVER
@ -194,7 +194,7 @@ S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: sensors@stimpy.netroedge.com
L: lm-sensors@lm-sensors.org
S: Maintained
ADT746X FAN DRIVER
@ -239,6 +239,12 @@ L: linux-usb-devel@lists.sourceforge.net
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@sh.cvut.cz
L: lm-sensors@lm-sensors.org
S: Maintained
ALPHA PORT
P: Richard Henderson
M: rth@twiddle.net
@ -259,6 +265,11 @@ P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br
S: Maintained
ARC FRAMEBUFFER DRIVER
P: Jaya Kumar
M: jayalk@intworks.biz
S: Maintained
ARM26 ARCHITECTURE
P: Ian Molton
M: spyro@f2s.com
@ -326,7 +337,7 @@ S: Maintained
ARPD SUPPORT
P: Jonathan Layes
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
ASUS ACPI EXTRAS DRIVER
@ -700,7 +711,7 @@ S: Orphaned
DIGI RIGHTSWITCH NETWORK DRIVER
P: Rick Richardson
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
W: http://www.digi.com
S: Orphaned
@ -730,6 +741,11 @@ M: tori@unhappy.mine.nu
L: linux-kernel@vger.kernel.org
S: Maintained
DOCBOOK FOR DOCUMENTATION
P: Martin Waitz
M: tali@admingilde.org
S: Maintained
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
@ -806,7 +822,7 @@ S: Maintained
ETHEREXPRESS-16 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
ETHERNET BRIDGE
@ -869,7 +885,7 @@ S: Maintained
FRAME RELAY DLCI/FRAD (Sangoma drivers too)
P: Mike McLagan
M: mike.mclagan@linux.org
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
FREEVXFS FILESYSTEM
@ -986,7 +1002,7 @@ P: Greg Kroah-Hartman
M: greg@kroah.com
P: Jean Delvare
M: khali@linux-fr.org
L: sensors@stimpy.netroedge.com
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.nu/
S: Maintained
@ -1023,8 +1039,8 @@ W: http://www.ia64-linux.org/
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
P: Jesse Barnes
M: jbarnes@sgi.com
P: Greg Edwards
M: edwardsg@sgi.com
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
@ -1209,7 +1225,7 @@ S: Maintained
IPX NETWORK LAYER
P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
IRDA SUBSYSTEM
@ -1414,13 +1430,13 @@ S: Supported
LM83 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: sensors@stimpy.netroedge.com
L: lm-sensors@lm-sensors.org
S: Maintained
LM90 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: sensors@stimpy.netroedge.com
L: lm-sensors@lm-sensors.org
S: Maintained
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP Dynamic Disks)
@ -1476,7 +1492,7 @@ MARVELL MV64340 ETHERNET DRIVER
P: Manish Lachwani
M: Manish_Lachwani@pmc-sierra.com
L: linux-mips@linux-mips.org
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Supported
MATROX FRAMEBUFFER DRIVER
@ -1586,13 +1602,13 @@ P: Andrew Morton
M: akpm@osdl.org
P: Jeff Garzik
M: jgarzik@pobox.com
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
NETWORKING [GENERAL]
P: Networking Team
M: netdev@oss.sgi.com
L: netdev@oss.sgi.com
M: netdev@vger.kernel.org
L: netdev@vger.kernel.org
S: Maintained
NETWORKING [IPv4/IPv6]
@ -1608,7 +1624,7 @@ P: Hideaki YOSHIFUJI
M: yoshfuji@linux-ipv6.org
P: Patrick McHardy
M: kaber@coreworks.de
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
IPVS
@ -1628,7 +1644,7 @@ NI5010 NETWORK DRIVER
P: Jan-Pascal van Best and Andreas Mohr
M: Jan-Pascal van Best <jvbest@qv3pluto.leidenuniv.nl>
M: Andreas Mohr <100.30936@germany.net>
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
@ -1670,7 +1686,7 @@ P: Peter De Shrijver
M: p2@ace.ulyssis.student.kuleuven.ac.be
P: Mike Phillips
M: mikep@linuxtr.net
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@ -1777,7 +1793,7 @@ S: Unmaintained
PCNET32 NETWORK DRIVER
P: Thomas Bogendörfer
M: tsbogend@alpha.franken.de
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
PHRAM MTD DRIVER
@ -1789,7 +1805,7 @@ S: Maintained
POSIX CLOCKS and TIMERS
P: George Anzinger
M: george@mvista.com
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Supported
PNP SUPPORT
@ -1824,7 +1840,7 @@ S: Supported
PRISM54 WIRELESS DRIVER
P: Prism54 Development Team
M: prism54-private@prism54.org
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
W: http://prism54.org
S: Maintained
@ -2041,7 +2057,7 @@ SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
W: http://www.brownhat.org/sis900.html
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
SIS FRAMEBUFFER DRIVER
@ -2059,7 +2075,7 @@ S: Maintained
SMSC47M1 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: sensors@stimpy.netroedge.com
L: lm-sensors@lm-sensors.org
S: Odd Fixes
SMB FILESYSTEM
@ -2100,7 +2116,7 @@ S: Maintained
SONIC NETWORK DRIVER
P: Thomas Bogendoerfer
M: tsbogend@alpha.franken.de
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Maintained
SONY VAIO CONTROL DEVICE DRIVER
@ -2157,7 +2173,7 @@ S: Supported
SPX NETWORK LAYER
P: Jay Schulist
M: jschlst@samba.org
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
S: Supported
SRM (Alpha) environment access
@ -2236,7 +2252,7 @@ S: Maintained
TOKEN-RING NETWORK DRIVER
P: Mike Phillips
M: mikep@linuxtr.net
L: netdev@oss.sgi.com
L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@ -2598,7 +2614,7 @@ S: Orphan
W1 DALLAS'S 1-WIRE BUS
P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
L: sensors@stimpy.netroedge.com
L: lm-sensors@lm-sensors.org
S: Maintained
W83L51xD SD/MMC CARD INTERFACE DRIVER
@ -2611,7 +2627,7 @@ S: Maintained
W83L785TS HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: sensors@stimpy.netroedge.com
L: lm-sensors@lm-sensors.org
S: Odd Fixes
WAN ROUTER & SANGOMA WANPIPE DRIVERS & API (X.25, FRAME RELAY, PPP, CISCO HDLC)

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 12
EXTRAVERSION =-rc4
EXTRAVERSION =
NAME=Woozy Numbat
# *DOCUMENTATION*
@ -530,7 +530,7 @@ endif
include $(srctree)/arch/$(ARCH)/Makefile
# arch Makefile may override CC so keep this after arch Makefile is included
NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# warn about C99 declaration after statement

View File

@ -1150,16 +1150,13 @@ osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remai
if (get_tv32(&tmp, sleep))
goto fault;
ticks = tmp.tv_usec;
ticks = (ticks + (1000000 / HZ) - 1) / (1000000 / HZ);
ticks += tmp.tv_sec * HZ;
ticks = timeval_to_jiffies(&tmp);
current->state = TASK_INTERRUPTIBLE;
ticks = schedule_timeout(ticks);
if (remain) {
tmp.tv_sec = ticks / HZ;
tmp.tv_usec = ticks % HZ;
jiffies_to_timeval(ticks, &tmp);
if (put_tv32(remain, &tmp))
goto fault;
}

View File

@ -67,10 +67,6 @@ config GENERIC_BUST_SPINLOCK
config GENERIC_ISA_DMA
bool
config GENERIC_IOMAP
bool
default y
config FIQ
bool
@ -202,6 +198,11 @@ config ARCH_H720X
help
This enables support for systems based on the Hynix HMS720x
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
help
This enables support for systems based on the Agilent AAEC-2000
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@ -234,6 +235,8 @@ source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-aaec2000/Kconfig"
# Definitions to make life easier
config ARCH_ACORN
bool
@ -277,7 +280,7 @@ config ISA_DMA_API
default y
config PCI
bool "PCI support" if ARCH_INTEGRATOR_AP
bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@ -497,7 +500,7 @@ source "drivers/cpufreq/Kconfig"
config CPU_FREQ_SA1100
bool
depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB)
depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110
@ -689,7 +692,9 @@ source "drivers/block/Kconfig"
source "drivers/acorn/block/Kconfig"
if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
source "drivers/ide/Kconfig"
endif

View File

@ -97,6 +97,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.

View File

@ -47,3 +47,10 @@ __XScale_start:
orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
#endif
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
str r1, [r0, #0x14]
str r1, [r0, #0x18]
#endif

View File

@ -169,7 +169,7 @@ static void amba_device_release(struct device *dev)
}
#define amba_attr(name,fmt,arg...) \
static ssize_t show_##name(struct device *_dev, char *buf) \
static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \
{ \
struct amba_device *dev = to_amba_device(_dev); \
return sprintf(buf, fmt, arg); \

View File

@ -30,6 +30,8 @@
#include <linux/dmapool.h>
#include <linux/list.h>
#include <asm/cacheflush.h>
#undef DEBUG
#undef STATS
@ -91,15 +93,12 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info)
static inline struct dmabounce_device_info *
find_dmabounce_dev(struct device *dev)
{
struct list_head *entry;
list_for_each(entry, &dmabounce_devs) {
struct dmabounce_device_info *d =
list_entry(entry, struct dmabounce_device_info, node);
struct dmabounce_device_info *d;
list_for_each_entry(d, &dmabounce_devs, node)
if (d->dev == dev)
return d;
}
return NULL;
}
@ -170,15 +169,11 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
static inline struct safe_buffer *
find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
{
struct list_head *entry;
list_for_each(entry, &device_info->safe_buffers) {
struct safe_buffer *b =
list_entry(entry, struct safe_buffer, node);
struct safe_buffer *b;
list_for_each_entry(b, &device_info->safe_buffers, node)
if (b->safe_dma_addr == safe_dma_addr)
return b;
}
return NULL;
}
@ -299,15 +294,26 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
buf->safe, (void *) buf->safe_dma_addr);
DO_STATS ( device_info->bounce_count++ );
if ((dir == DMA_FROM_DEVICE) ||
(dir == DMA_BIDIRECTIONAL)) {
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
unsigned long ptr;
dev_dbg(dev,
"%s: copy back safe %p to unsafe %p size %d\n",
__func__, buf->safe, buf->ptr, size);
memcpy(buf->ptr, buf->safe, size);
/*
* DMA buffers must have the same cache properties
* as if they were really used for DMA - which means
* data must be written back to RAM. Note that
* we don't use dmac_flush_range() here for the
* bidirectional case because we know the cache
* lines will be coherent with the data written.
*/
ptr = (unsigned long)buf->ptr;
dmac_clean_range(ptr, ptr + size);
}
free_safe_buffer(device_info, buf);
}

View File

@ -721,16 +721,17 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
return ret;
}
static int sa1111_remove_one(struct device *dev, void *data)
{
device_unregister(dev);
return 0;
}
static void __sa1111_remove(struct sa1111 *sachip)
{
struct list_head *l, *n;
void __iomem *irqbase = sachip->base + SA1111_INTC;
list_for_each_safe(l, n, &sachip->dev->children) {
struct device *d = list_to_dev(l);
device_unregister(d);
}
device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
/* disable all IRQs */
sa1111_writel(0, irqbase + SA1111_INTEN0);

View File

@ -22,7 +22,7 @@
* them early in the boot process, then pass them to the appropriate drivers.
* Not all devices use all paramaters but the format is common to all.
*/
#ifdef ARCH_SA1100
#ifdef CONFIG_ARCH_SA1100
#define PARAM_BASE 0xe8ffc000
#else
#define PARAM_BASE 0xa0000a00

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sat Mar 26 21:32:26 2005
# Linux kernel version: 2.6.12-rc6-git3
# Thu Jun 9 19:00:50 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@ -34,6 +35,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
CONFIG_CPU_MINICACHE=y
#
# Processor Features
@ -122,6 +124,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9
# Bus support
#
CONFIG_ISA=y
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@ -131,6 +134,7 @@ CONFIG_ISA=y
#
# Kernel Features
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_LEDS is not set
@ -152,12 +156,14 @@ CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@ -294,7 +300,6 @@ CONFIG_PARPORT_NOT_PC=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
@ -428,7 +433,6 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@ -526,6 +530,7 @@ CONFIG_IRDA_ULTRA=y
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=y
# CONFIG_VIA_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_SCO is not set
@ -618,7 +623,6 @@ CONFIG_NET_WIRELESS=y
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@ -687,7 +691,6 @@ CONFIG_RTC=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
@ -736,6 +739,7 @@ CONFIG_I2C_ELEKTOR=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@ -747,6 +751,7 @@ CONFIG_I2C_ELEKTOR=m
#
# Other I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@ -871,7 +876,6 @@ CONFIG_USB_PRINTER=m
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
@ -954,9 +958,11 @@ CONFIG_USB_USS720=m
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@ -985,6 +991,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m

View File

@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Mon Mar 28 00:02:26 2005
# Linux kernel version: 2.6.12-rc4
# Thu Jun 9 01:59:03 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@ -33,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@ -120,6 +123,7 @@ CONFIG_CPU_MINICACHE=y
# Bus support
#
CONFIG_ISA=y
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@ -138,6 +142,7 @@ CONFIG_PCMCIA_SA1100=y
#
# Kernel Features
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_LEDS is not set
@ -159,12 +164,13 @@ CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@ -298,7 +304,6 @@ CONFIG_MTD_SA1100=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
@ -379,7 +384,6 @@ CONFIG_NET=y
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@ -476,6 +480,7 @@ CONFIG_IRCOMM=m
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=m
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
@ -647,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
@ -676,9 +680,11 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Mon Mar 28 00:22:34 2005
# Linux kernel version: 2.6.12-rc6-git3
# Thu Jun 9 20:58:58 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@ -34,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
CONFIG_CPU_MINICACHE=y
#
# Processor Features
@ -119,6 +121,7 @@ CONFIG_CPU_MINICACHE=y
# Bus support
#
CONFIG_ISA=y
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@ -128,6 +131,7 @@ CONFIG_ISA=y
#
# Kernel Features
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
@ -151,12 +155,14 @@ CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@ -280,7 +286,6 @@ CONFIG_MTD_CFI_UTIL=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
@ -338,7 +343,6 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@ -484,7 +488,6 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@ -533,7 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support

View File

@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type

View File

@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type

View File

@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type

View File

@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type

View File

@ -6,7 +6,7 @@ AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
# Object file lists.
obj-y := arch.o compat.o dma.o entry-armv.o entry-common.o irq.o \
obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \
process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \
time.o traps.o

View File

@ -1,46 +0,0 @@
/*
* linux/arch/arm/kernel/arch.c
*
* Architecture specific fixups.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/types.h>
#include <asm/elf.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
unsigned int vram_size;
#ifdef CONFIG_ARCH_ACORN
unsigned int memc_ctrl_reg;
unsigned int number_mfm_drives;
static int __init parse_tag_acorn(const struct tag *tag)
{
memc_ctrl_reg = tag->u.acorn.memc_control_reg;
number_mfm_drives = tag->u.acorn.adfsdrives;
switch (tag->u.acorn.vram_pages) {
case 512:
vram_size += PAGE_SIZE * 256;
case 256:
vram_size += PAGE_SIZE * 256;
default:
break;
}
#if 0
if (vram_size) {
desc->video_start = 0x02000000;
desc->video_end = 0x02000000 + vram_size;
}
#endif
return 0;
}
__tagtable(ATAG_ACORN, parse_tag_acorn);
#endif

View File

@ -866,19 +866,19 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
return ec;
}
static ssize_t ecard_show_irq(struct device *dev, char *buf)
static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->irq);
}
static ssize_t ecard_show_dma(struct device *dev, char *buf)
static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->dma);
}
static ssize_t ecard_show_resources(struct device *dev, char *buf)
static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
char *str = buf;
@ -893,19 +893,19 @@ static ssize_t ecard_show_resources(struct device *dev, char *buf)
return str - buf;
}
static ssize_t ecard_show_vendor(struct device *dev, char *buf)
static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->cid.manufacturer);
}
static ssize_t ecard_show_device(struct device *dev, char *buf)
static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->cid.product);
}
static ssize_t ecard_show_type(struct device *dev, char *buf)
static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC");

View File

@ -23,49 +23,92 @@
#include "entry-header.S"
/*
* Interrupt handling. Preserves r7, r8, r9
*/
.macro irq_handler
1: get_irqnr_and_base r0, r6, r5, lr
movne r1, sp
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
adrne lr, 1b
bne asm_do_IRQ
#ifdef CONFIG_SMP
/*
* XXX
*
* this macro assumes that irqstat (r6) and base (r5) are
* preserved from get_irqnr_and_base above
*/
test_for_ipi r0, r6, r5, lr
movne r0, sp
adrne lr, 1b
bne do_IPI
#endif
.endm
/*
* Invalid mode handlers
*/
.macro inv_entry, sym, reason
sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - lr} @ Save XXX r0 - lr
ldr r4, .LC\sym
.macro inv_entry, reason
sub sp, sp, #S_FRAME_SIZE
stmib sp, {r1 - lr}
mov r1, #\reason
.endm
__pabt_invalid:
inv_entry abt, BAD_PREFETCH
b 1f
inv_entry BAD_PREFETCH
b common_invalid
__dabt_invalid:
inv_entry abt, BAD_DATA
b 1f
inv_entry BAD_DATA
b common_invalid
__irq_invalid:
inv_entry irq, BAD_IRQ
b 1f
inv_entry BAD_IRQ
b common_invalid
__und_invalid:
inv_entry und, BAD_UNDEFINSTR
inv_entry BAD_UNDEFINSTR
@
@ XXX fall through to common_invalid
@
@
@ common_invalid - generic code for failed exception (re-entrant version of handlers)
@
common_invalid:
zero_fp
ldmia r0, {r4 - r6}
add r0, sp, #S_PC @ here for interlock avoidance
mov r7, #-1 @ "" "" "" ""
str r4, [sp] @ save preserved r0
stmia r0, {r5 - r7} @ lr_<exception>,
@ cpsr_<exception>, "old_r0"
1: zero_fp
ldmia r4, {r5 - r7} @ Get XXX pc, cpsr, old_r0
add r4, sp, #S_PC
stmia r4, {r5 - r7} @ Save XXX pc, cpsr, old_r0
mov r0, sp
and r2, r6, #31 @ int mode
and r2, r6, #0x1f
b bad_mode
/*
* SVC mode handlers
*/
.macro svc_entry, sym
.macro svc_entry
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ save r0 - r12
ldr r2, .LC\sym
add r0, sp, #S_FRAME_SIZE
ldmia r2, {r2 - r4} @ get pc, cpsr
add r5, sp, #S_SP
stmib sp, {r1 - r12}
ldmia r0, {r1 - r3}
add r5, sp, #S_SP @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
add r0, sp, #S_FRAME_SIZE @ "" "" "" ""
str r1, [sp] @ save the "real" r0 copied
@ from the exception stack
mov r1, lr
@
@ -82,7 +125,7 @@ __und_invalid:
.align 5
__dabt_svc:
svc_entry abt
svc_entry
@
@ get ready to re-enable interrupts if appropriate
@ -129,28 +172,24 @@ __dabt_svc:
.align 5
__irq_svc:
svc_entry irq
svc_entry
#ifdef CONFIG_PREEMPT
get_thread_info r8
ldr r9, [r8, #TI_PREEMPT] @ get preempt count
add r7, r9, #1 @ increment it
str r7, [r8, #TI_PREEMPT]
get_thread_info tsk
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
add r7, r8, #1 @ increment it
str r7, [tsk, #TI_PREEMPT]
#endif
1: get_irqnr_and_base r0, r6, r5, lr
movne r1, sp
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
adrne lr, 1b
bne asm_do_IRQ
irq_handler
#ifdef CONFIG_PREEMPT
ldr r0, [r8, #TI_FLAGS] @ get flags
ldr r0, [tsk, #TI_FLAGS] @ get flags
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
preempt_return:
ldr r0, [r8, #TI_PREEMPT] @ read preempt value
ldr r0, [tsk, #TI_PREEMPT] @ read preempt value
str r8, [tsk, #TI_PREEMPT] @ restore preempt count
teq r0, r7
str r9, [r8, #TI_PREEMPT] @ restore preempt count
strne r0, [r0, -r0] @ bug()
#endif
ldr r0, [sp, #S_PSR] @ irqs are already disabled
@ -161,7 +200,7 @@ preempt_return:
#ifdef CONFIG_PREEMPT
svc_preempt:
teq r9, #0 @ was preempt count = 0
teq r8, #0 @ was preempt count = 0
ldreq r6, .LCirq_stat
movne pc, lr @ no
ldr r0, [r6, #4] @ local_irq_count
@ -169,9 +208,9 @@ svc_preempt:
adds r0, r0, r1
movne pc, lr
mov r7, #0 @ preempt_schedule_irq
str r7, [r8, #TI_PREEMPT] @ expects preempt_count == 0
str r7, [tsk, #TI_PREEMPT] @ expects preempt_count == 0
1: bl preempt_schedule_irq @ irq en/disable is done inside
ldr r0, [r8, #TI_FLAGS] @ get new tasks TI_FLAGS
ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS
tst r0, #_TIF_NEED_RESCHED
beq preempt_return @ go again
b 1b
@ -179,7 +218,7 @@ svc_preempt:
.align 5
__und_svc:
svc_entry und
svc_entry
@
@ call emulation code, which returns using r9 if it has emulated
@ -209,7 +248,7 @@ __und_svc:
.align 5
__pabt_svc:
svc_entry abt
svc_entry
@
@ re-enable interrupts if appropriate
@ -242,12 +281,8 @@ __pabt_svc:
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.align 5
.LCirq:
.word __temp_irq
.LCund:
.word __temp_und
.LCabt:
.word __temp_abt
.LCcralign:
.word cr_alignment
#ifdef MULTI_ABORT
.LCprocfns:
.word processor
@ -262,14 +297,18 @@ __pabt_svc:
/*
* User mode handlers
*/
.macro usr_entry, sym
sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - r12} @ save r0 - r12
ldr r7, .LC\sym
add r5, sp, #S_PC
ldmia r7, {r2 - r4} @ Get USR pc, cpsr
.macro usr_entry
sub sp, sp, #S_FRAME_SIZE
stmib sp, {r1 - r12}
#if __LINUX_ARM_ARCH__ < 6
ldmia r0, {r1 - r3}
add r0, sp, #S_PC @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
str r1, [sp] @ save the "real" r0 copied
@ from the exception stack
#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
@ make sure our user space atomic helper is aborted
cmp r2, #VIRT_OFFSET
bichs r3, r3, #PSR_Z_BIT
@ -284,13 +323,13 @@ __pabt_svc:
@
@ Also, separately save sp_usr and lr_usr
@
stmia r5, {r2 - r4}
stmdb r5, {sp, lr}^
stmia r0, {r2 - r4}
stmdb r0, {sp, lr}^
@
@ Enable the alignment trap while in kernel mode
@
alignment_trap r7, r0, __temp_\sym
alignment_trap r0
@
@ Clear FP to mark the first stack frame
@ -300,7 +339,7 @@ __pabt_svc:
.align 5
__dabt_usr:
usr_entry abt
usr_entry
@
@ Call the processor-specific abort handler:
@ -329,30 +368,23 @@ __dabt_usr:
.align 5
__irq_usr:
usr_entry irq
usr_entry
#ifdef CONFIG_PREEMPT
get_thread_info r8
ldr r9, [r8, #TI_PREEMPT] @ get preempt count
add r7, r9, #1 @ increment it
str r7, [r8, #TI_PREEMPT]
#endif
1: get_irqnr_and_base r0, r6, r5, lr
movne r1, sp
adrne lr, 1b
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
bne asm_do_IRQ
#ifdef CONFIG_PREEMPT
ldr r0, [r8, #TI_PREEMPT]
teq r0, r7
str r9, [r8, #TI_PREEMPT]
strne r0, [r0, -r0]
mov tsk, r8
#else
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
add r7, r8, #1 @ increment it
str r7, [tsk, #TI_PREEMPT]
#endif
irq_handler
#ifdef CONFIG_PREEMPT
ldr r0, [tsk, #TI_PREEMPT]
str r8, [tsk, #TI_PREEMPT]
teq r0, r7
strne r0, [r0, -r0]
#endif
mov why, #0
b ret_to_user
@ -360,7 +392,7 @@ __irq_usr:
.align 5
__und_usr:
usr_entry und
usr_entry
tst r3, #PSR_T_BIT @ Thumb mode?
bne fpundefinstr @ ignore FP
@ -476,7 +508,7 @@ fpundefinstr:
.align 5
__pabt_usr:
usr_entry abt
usr_entry
enable_irq @ Enable interrupts
mov r0, r2 @ address (pc)
@ -616,11 +648,17 @@ __kuser_helper_start:
__kuser_cmpxchg: @ 0xffff0fc0
#if __LINUX_ARM_ARCH__ < 6
#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
#ifdef CONFIG_SMP /* sanity check */
#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?"
#endif
/*
* Poor you. No fast solution possible...
* The kernel itself must perform the operation.
* A special ghost syscall is used for that (see traps.c).
*/
swi #0x9ffff0
mov pc, lr
#elif __LINUX_ARM_ARCH__ < 6
/*
* Theory of operation:
@ -735,29 +773,41 @@ __kuser_helper_end:
*
* Common stub entry macro:
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*
* SP points to a minimal amount of processor-private memory, the address
* of which is copied into r0 for the mode specific abort handler.
*/
.macro vector_stub, name, sym, correction=0
.macro vector_stub, name, correction=0
.align 5
vector_\name:
ldr r13, .LCs\sym
.if \correction
sub lr, lr, #\correction
.endif
str lr, [r13] @ save lr_IRQ
mrs lr, spsr
str lr, [r13, #4] @ save spsr_IRQ
@
@ now branch to the relevant MODE handling routine
@
mrs r13, cpsr
bic r13, r13, #MODE_MASK
orr r13, r13, #SVC_MODE
msr spsr_cxsf, r13 @ switch to SVC_32 mode
and lr, lr, #15
@
@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
@ (parent CPSR)
@
stmia sp, {r0, lr} @ save r0, lr
mrs lr, spsr
str lr, [sp, #8] @ save spsr
@
@ Prepare for SVC32 mode. IRQs remain disabled.
@
mrs r0, cpsr
bic r0, r0, #MODE_MASK
orr r0, r0, #SVC_MODE
msr spsr_cxsf, r0
@
@ the branch table must immediately follow this code
@
mov r0, sp
and lr, lr, #0x0f
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ Changes mode and branches
movs pc, lr @ branch to handler in SVC mode
.endm
.globl __stubs_start
@ -765,7 +815,7 @@ __stubs_start:
/*
* Interrupt dispatcher
*/
vector_stub irq, irq, 4
vector_stub irq, 4
.long __irq_usr @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
@ -788,7 +838,7 @@ __stubs_start:
* Data abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
vector_stub dabt, abt, 8
vector_stub dabt, 8
.long __dabt_usr @ 0 (USR_26 / USR_32)
.long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
@ -811,7 +861,7 @@ __stubs_start:
* Prefetch abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
vector_stub pabt, abt, 4
vector_stub pabt, 4
.long __pabt_usr @ 0 (USR_26 / USR_32)
.long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
@ -834,7 +884,7 @@ __stubs_start:
* Undef instr entry dispatcher
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
vector_stub und, und
vector_stub und
.long __und_usr @ 0 (USR_26 / USR_32)
.long __und_invalid @ 1 (FIQ_26 / FIQ_32)
@ -888,13 +938,6 @@ vector_addrexcptn:
.LCvswi:
.word vector_swi
.LCsirq:
.word __temp_irq
.LCsund:
.word __temp_und
.LCsabt:
.word __temp_abt
.globl __stubs_end
__stubs_end:
@ -916,23 +959,6 @@ __vectors_end:
.data
/*
* Do not reorder these, and do not insert extra data between...
*/
__temp_irq:
.word 0 @ saved lr_irq
.word 0 @ saved spsr_irq
.word -1 @ old_r0
__temp_und:
.word 0 @ Saved lr_und
.word 0 @ Saved spsr_und
.word -1 @ old_r0
__temp_abt:
.word 0 @ Saved lr_abt
.word 0 @ Saved spsr_abt
.word -1 @ old_r0
.globl cr_alignment
.globl cr_no_alignment
cr_alignment:

View File

@ -59,11 +59,10 @@
mov \rd, \rd, lsl #13
.endm
.macro alignment_trap, rbase, rtemp, sym
.macro alignment_trap, rtemp
#ifdef CONFIG_ALIGNMENT_TRAP
#define OFF_CR_ALIGNMENT(x) cr_alignment - x
ldr \rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)]
ldr \rtemp, .LCcralign
ldr \rtemp, [\rtemp]
mcr p15, 0, \rtemp, c1, c0
#endif
.endm

View File

@ -2,6 +2,8 @@
* linux/arch/arm/kernel/head.S
*
* Copyright (C) 1994-2002 Russell King
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -165,6 +167,48 @@ __mmap_switched:
stmia r6, {r0, r4} @ Save control register values
b start_kernel
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
*
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
beq __error
/*
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
ldmia r4, {r5, r6, r13} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r6, r4] @ get secondary_data.pgdir
adr lr, __enable_mmu @ return address
add pc, r10, #12 @ initialise processor
@ (return control reg)
/*
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
ldr sp, [r6, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
.type __secondary_data, %object
__secondary_data:
.long .
.long secondary_data
.long __secondary_switched
#endif /* defined(CONFIG_SMP) */
/*

Some files were not shown because too many files have changed in this diff Show More