diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt index 70dd5118a324..73d336befa08 100644 --- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt +++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt @@ -1,11 +1,20 @@ * Qualcomm NAND controller Required properties: -- compatible: should be "qcom,ipq806x-nand" +- compatible: must be one of the following: + * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x + SoC and it uses ADM DMA + * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in + IPQ4019 SoC and it uses BAM DMA + * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in + IPQ8074 SoC and it uses BAM DMA + - reg: MMIO address range - clocks: must contain core clock and always on clock - clock-names: must contain "core" for the core clock and "aon" for the always on clock + +EBI2 specific properties: - dmas: DMA specifier, consisting of a phandle to the ADM DMA controller node and the channel number to be used for NAND. Refer to dma.txt and qcom_adm.txt for more details @@ -16,6 +25,12 @@ Required properties: - qcom,data-crci: must contain the ADM data type CRCI block instance number specified for the NAND controller on the given platform + +QPIC specific properties: +- dmas: DMA specifier, consisting of a phandle to the BAM DMA + and the channel number to be used for NAND. Refer to + dma.txt, qcom_bam_dma.txt for more details +- dma-names: must contain all 3 channel names : "tx", "rx", "cmd" - #address-cells: <1> - subnodes give the chip-select number - #size-cells: <0> @@ -26,7 +41,6 @@ chip-selects which (may) contain NAND flash chips. Their properties are as follows. Required properties: -- compatible: should contain "qcom,nandcs" - reg: a single integer representing the chip-select number (e.g., 0, 1, 2, etc.) - #address-cells: see partition.txt @@ -43,8 +57,8 @@ partition.txt for more detail. Example: -nand@1ac00000 { - compatible = "qcom,ebi2-nandc"; +nand-controller@1ac00000 { + compatible = "qcom,ipq806x-nand"; reg = <0x1ac00000 0x800>; clocks = <&gcc EBI2_CLK>, @@ -59,8 +73,7 @@ nand@1ac00000 { #address-cells = <1>; #size-cells = <0>; - nandcs@0 { - compatible = "qcom,nandcs"; + nand@0 { reg = <0>; nand-ecc-strength = <4>; @@ -84,3 +97,43 @@ nand@1ac00000 { }; }; }; + +nand-controller@79b0000 { + compatible = "qcom,ipq4019-nand"; + reg = <0x79b0000 0x1000>; + + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpicbam 0>, + <&qpicbam 1>, + <&qpicbam 2>; + dma-names = "tx", "rx", "cmd"; + + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot-nand"; + reg = <0 0x58a0000>; + }; + + partition@58a0000 { + label = "fs-nand"; + reg = <0x58a0000 0x4000000>; + }; + }; + }; +}; diff --git a/Documentation/driver-api/mtdnand.rst b/Documentation/driver-api/mtdnand.rst index e9afa586d15e..2a5191b6d445 100644 --- a/Documentation/driver-api/mtdnand.rst +++ b/Documentation/driver-api/mtdnand.rst @@ -516,7 +516,7 @@ mirrored table is performed. The most important field in the nand_bbt_descr structure is the options field. The options define most of the table properties. Use the -predefined constants from nand.h to define the options. +predefined constants from rawnand.h to define the options. - Number of bits per block @@ -843,7 +843,7 @@ Chip option constants Constants for chip id table ~~~~~~~~~~~~~~~~~~~~~~~~~~~ -These constants are defined in nand.h. They are OR-ed together to +These constants are defined in rawnand.h. They are OR-ed together to describe the chip functionality:: /* Buswitdh is 16 bit */ @@ -865,7 +865,7 @@ describe the chip functionality:: Constants for runtime options ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -These constants are defined in nand.h. They are OR-ed together to +These constants are defined in rawnand.h. They are OR-ed together to describe the functionality:: /* The hw ecc generator provides a syndrome instead a ecc value on read @@ -956,7 +956,7 @@ developer. Each struct member has a short description which is marked with an [XXX] identifier. See the chapter "Documentation hints" for an explanation. -.. kernel-doc:: include/linux/mtd/nand.h +.. kernel-doc:: include/linux/mtd/rawnand.h :internal: Public Functions Provided diff --git a/MAINTAINERS b/MAINTAINERS index 24f57993d78a..fece49dcb0f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9184,7 +9184,7 @@ T: git git://git.infradead.org/linux-mtd.git nand/fixes T: git git://git.infradead.org/l2-mtd.git nand/next S: Maintained F: drivers/mtd/nand/ -F: include/linux/mtd/nand*.h +F: include/linux/mtd/*nand*.h NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER M: Daniel Mack diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index e568c8c6f69c..cbde0030c092 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 18296a99c4d2..62e7bc3018f0 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 284ff27c1b32..be997243447b 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 0464999b7137..e75741fb2c1d 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 70e00dbeec96..b07c9b18d427 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 1d76e7480a42..cb0a41e83582 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 41c7c9615791..d85accf7f760 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index bcb678fd2415..8971c3c0f0fe 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index b2db791b3b38..8b29398f4dc7 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 55b186ef863a..8745162ec05d 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 8c2cbd693d21..42a700053103 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 508c2d7786e2..93b89291c06b 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 5db0edf716dd..d2283009a5ff 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index fad95b74bb65..b93ad58b0a63 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index dece47d76282..6a38c7603064 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 6d32beeb2d88..302260583e8e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c index 7684f9203474..1bffbb4e050f 100644 --- a/arch/arm/mach-omap1/board-nand.c +++ b/arch/arm/mach-omap1/board-nand.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include "common.h" diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 150b57ba42bf..e994a78bdd09 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 12f74b46e2ff..3f5863de766a 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 9dc3f59bed9c..83d43cff4bd7 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 7bd671b2854c..0c315515dd2d 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 7ef80a8304c0..94778739e38f 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 1467c1d1e541..d6d92f388f14 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 811a7317f3ea..6d28035ebba5 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index fa9d71d194f0..91f7c3e40065 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 36646975b5d2..47e3e38e9bec 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 13de6602966f..6a386fd6363e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 9e0bc46e90ec..0e116c92bf01 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -23,7 +23,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 029ef1b58925..c14cab361922 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 7b28eb623fc1..ebdbafb9382a 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -41,7 +41,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 5185036765db..704dc84b3480 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index b0ed401da3a3..afe18baf0c84 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -50,7 +50,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index f5b5c49b56ac..17821976f769 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -43,7 +43,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 71af8d2fd320..15140d34f927 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -49,7 +49,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index 64b1a0b7b803..ed3b22ceef06 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -36,7 +36,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 868c82087403..84e3a9c53184 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index a39fb9780dd3..b5ba615cf9dd 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index f5e6322145fa..1adc957edf0f 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index e79b3b810c39..c4a8ffb15417 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 7528148dc492..400e6693643e 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 37f8f25a1347..696cc9d7820a 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -38,7 +38,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index 3f646c787e58..925a98eb6d68 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index a74540514bdb..53b56a429dde 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 992442a03d8b..83831002c832 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c index a5504f57cb00..3e7fbdbdb3c4 100644 --- a/arch/mips/alchemy/devboards/db1300.c +++ b/arch/mips/alchemy/devboards/db1300.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index 1c01d6eadb08..421bd5793f7e 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h index 7f7b0fc554da..f381d465e768 100644 --- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h +++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h @@ -16,7 +16,7 @@ #ifndef __ASM_MACH_JZ4740_JZ4740_NAND_H__ #define __ASM_MACH_JZ4740_JZ4740_NAND_H__ -#include +#include #include #define JZ_NAND_NUM_BANKS 4 diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c index f03131fec41d..4d1b4c003376 100644 --- a/arch/mips/netlogic/xlr/platform-flash.c +++ b/arch/mips/netlogic/xlr/platform-flash.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c index 7cf4eb50fc72..a7a4e9f5146d 100644 --- a/arch/mips/pnx833x/common/platform.c +++ b/arch/mips/pnx833x/common/platform.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 0966adccf520..32ea3e6731d6 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 5de60a77eaa1..0bcbe58b11e9 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index b833e6cc684c..84b16133554b 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1809,37 +1809,22 @@ static int dbg_protection_show(struct seq_file *s, void *p) } DEBUGFS_RO_ATTR(protection, dbg_protection_show); -static int __init doc_dbg_register(struct docg3 *docg3) +static void __init doc_dbg_register(struct mtd_info *floor) { - struct dentry *root, *entry; + struct dentry *root = floor->dbg.dfs_dir; + struct docg3 *docg3 = floor->priv; - root = debugfs_create_dir("docg3", NULL); - if (!root) - return -ENOMEM; + if (IS_ERR_OR_NULL(root)) + return; - entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3, - &flashcontrol_fops); - if (entry) - entry = debugfs_create_file("asic_mode", S_IRUSR, root, - docg3, &asic_mode_fops); - if (entry) - entry = debugfs_create_file("device_id", S_IRUSR, root, - docg3, &device_id_fops); - if (entry) - entry = debugfs_create_file("protection", S_IRUSR, root, - docg3, &protection_fops); - if (entry) { - docg3->debugfs_root = root; - return 0; - } else { - debugfs_remove_recursive(root); - return -ENOMEM; - } -} - -static void doc_dbg_unregister(struct docg3 *docg3) -{ - debugfs_remove_recursive(docg3->debugfs_root); + debugfs_create_file("docg3_flashcontrol", S_IRUSR, root, docg3, + &flashcontrol_fops); + debugfs_create_file("docg3_asic_mode", S_IRUSR, root, docg3, + &asic_mode_fops); + debugfs_create_file("docg3_device_id", S_IRUSR, root, docg3, + &device_id_fops); + debugfs_create_file("docg3_protection", S_IRUSR, root, docg3, + &protection_fops); } /** @@ -2114,6 +2099,8 @@ static int __init docg3_probe(struct platform_device *pdev) 0); if (ret) goto err_probe; + + doc_dbg_register(cascade->floors[floor]); } ret = doc_register_sysfs(pdev, cascade); @@ -2121,7 +2108,6 @@ static int __init docg3_probe(struct platform_device *pdev) goto err_probe; platform_set_drvdata(pdev, cascade); - doc_dbg_register(cascade->floors[0]->priv); return 0; notfound: @@ -2148,7 +2134,6 @@ static int docg3_release(struct platform_device *pdev) int floor; doc_unregister_sysfs(pdev, cascade); - doc_dbg_unregister(docg3); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) if (cascade->floors[floor]) doc_release_device(cascade->floors[floor]); diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h index 19fb93f96a3a..e99946575398 100644 --- a/drivers/mtd/devices/docg3.h +++ b/drivers/mtd/devices/docg3.h @@ -299,7 +299,6 @@ struct docg3_cascade { * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC * if 0, use all the 16 bytes. * @oob_write_buf: prepared OOB for next page_write - * @debugfs_root: debugfs root node */ struct docg3 { struct device *dev; @@ -312,7 +311,6 @@ struct docg3 { loff_t oob_write_ofs; int oob_autoecc; u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE]; - struct dentry *debugfs_root; }; #define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg) diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index dd5069876537..ddf478976013 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -775,6 +775,8 @@ static int spear_smi_probe_config_dt(struct platform_device *pdev, pdata->board_flash_info = devm_kzalloc(&pdev->dev, sizeof(*pdata->board_flash_info), GFP_KERNEL); + if (!pdata->board_flash_info) + return -ENOMEM; /* Fill structs for each subnode (flash device) */ while ((pp = of_get_next_child(np, pp))) { diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 21afd94cd904..7bc29d725200 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -2073,15 +2073,17 @@ static int stfsm_probe(struct platform_device *pdev) ret = stfsm_init(fsm); if (ret) { dev_err(&pdev->dev, "Failed to initialise FSM Controller\n"); - return ret; + goto err_clk_unprepare; } stfsm_fetch_platform_configs(pdev); /* Detect SPI FLASH device */ info = stfsm_jedec_probe(fsm); - if (!info) - return -ENODEV; + if (!info) { + ret = -ENODEV; + goto err_clk_unprepare; + } fsm->info = info; /* Use device size to determine address width */ @@ -2095,11 +2097,11 @@ static int stfsm_probe(struct platform_device *pdev) if (info->config) { ret = info->config(fsm); if (ret) - return ret; + goto err_clk_unprepare; } else { ret = stfsm_prepare_rwe_seqs_default(fsm); if (ret) - return ret; + goto err_clk_unprepare; } fsm->mtd.name = info->name; @@ -2124,6 +2126,10 @@ static int stfsm_probe(struct platform_device *pdev) fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10)); return mtd_device_register(&fsm->mtd, NULL, 0); + +err_clk_unprepare: + clk_disable_unprepare(fsm->clk); + return ret; } static int stfsm_remove(struct platform_device *pdev) @@ -2147,9 +2153,7 @@ static int stfsmfsm_resume(struct device *dev) { struct stfsm *fsm = dev_get_drvdata(dev); - clk_prepare_enable(fsm->clk); - - return 0; + return clk_prepare_enable(fsm->clk); } #endif diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 8db740d6eb08..57ef1fb42a04 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c index f2b68667ea59..26de0a1d08cf 100644 --- a/drivers/mtd/maps/amd76xrom.c +++ b/drivers/mtd/maps/amd76xrom.c @@ -296,7 +296,7 @@ static void amd76xrom_remove_one(struct pci_dev *pdev) amd76xrom_cleanup(window); } -static struct pci_device_id amd76xrom_pci_tbl[] = { +static const struct pci_device_id amd76xrom_pci_tbl[] = { { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440, @@ -319,7 +319,7 @@ static struct pci_driver amd76xrom_driver = { static int __init init_amd76xrom(void) { struct pci_dev *pdev; - struct pci_device_id *id; + const struct pci_device_id *id; pdev = NULL; for(id = amd76xrom_pci_tbl; id->vendor; id++) { pdev = pci_get_device(id->vendor, id->device, NULL); diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 4f206a99164c..584962ec49f8 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -326,7 +326,7 @@ static void ck804xrom_remove_one(struct pci_dev *pdev) ck804xrom_cleanup(window); } -static struct pci_device_id ck804xrom_pci_tbl[] = { +static const struct pci_device_id ck804xrom_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 }, @@ -353,7 +353,7 @@ static struct pci_driver ck804xrom_driver = { static int __init init_ck804xrom(void) { struct pci_dev *pdev; - struct pci_device_id *id; + const struct pci_device_id *id; int retVal; pdev = NULL; diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c index 9646b0766ce0..da9f6d76ce1d 100644 --- a/drivers/mtd/maps/esb2rom.c +++ b/drivers/mtd/maps/esb2rom.c @@ -384,7 +384,7 @@ static void esb2rom_remove_one(struct pci_dev *pdev) esb2rom_cleanup(window); } -static struct pci_device_id esb2rom_pci_tbl[] = { +static const struct pci_device_id esb2rom_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -414,7 +414,7 @@ static struct pci_driver esb2rom_driver = { static int __init init_esb2rom(void) { struct pci_dev *pdev; - struct pci_device_id *id; + const struct pci_device_id *id; int retVal; pdev = NULL; diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c index 976d42f63aef..1888c5bf13f8 100644 --- a/drivers/mtd/maps/ichxrom.c +++ b/drivers/mtd/maps/ichxrom.c @@ -323,7 +323,7 @@ static void ichxrom_remove_one(struct pci_dev *pdev) ichxrom_cleanup(window); } -static struct pci_device_id ichxrom_pci_tbl[] = { +static const struct pci_device_id ichxrom_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -351,7 +351,7 @@ static struct pci_driver ichxrom_driver = { static int __init init_ichxrom(void) { struct pci_dev *pdev; - struct pci_device_id *id; + const struct pci_device_id *id; pdev = NULL; for (id = ichxrom_pci_tbl; id->vendor; id++) { diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index 8bf79775e7c1..dd5d6855f543 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -170,7 +170,7 @@ static int vr_nor_init_maps(struct vr_nor_mtd *p) return err; } -static struct pci_device_id vr_nor_pci_ids[] = { +static const struct pci_device_id vr_nor_pci_ids[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x500D)}, {0,} }; diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index eb0242e0b2d9..7b3bb40aff72 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -228,7 +228,7 @@ static struct mtd_pci_info intel_dc21285_info = { * PCI device ID table */ -static struct pci_device_id mtd_pci_ids[] = { +static const struct pci_device_id mtd_pci_ids[] = { { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x530d, diff --git a/drivers/mtd/maps/physmap_of_core.c b/drivers/mtd/maps/physmap_of_core.c index 62fa6836f218..b1bd4faecfb2 100644 --- a/drivers/mtd/maps/physmap_of_core.c +++ b/drivers/mtd/maps/physmap_of_core.c @@ -178,8 +178,8 @@ static int of_flash_probe(struct platform_device *dev) */ p = of_get_property(dp, "reg", &count); if (!p || count % reg_tuple_size != 0) { - dev_err(&dev->dev, "Malformed reg property on %s\n", - dev->dev.of_node->full_name); + dev_err(&dev->dev, "Malformed reg property on %pOF\n", + dev->dev.of_node); err = -EINVAL; goto err_flash_remove; } @@ -235,10 +235,10 @@ static int of_flash_probe(struct platform_device *dev) err = of_flash_probe_gemini(dev, dp, &info->list[i].map); if (err) - return err; + goto err_out; err = of_flash_probe_versatile(dev, dp, &info->list[i].map); if (err) - return err; + goto err_out; err = -ENOMEM; info->list[i].map.virt = ioremap(info->list[i].map.phys, diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c index 05b286b5289f..4ed1a6bb4d3c 100644 --- a/drivers/mtd/maps/physmap_of_gemini.c +++ b/drivers/mtd/maps/physmap_of_gemini.c @@ -43,13 +43,6 @@ #define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */ -/* Miscellaneous Control Register */ -#define GLOBAL_MISC_CTRL 0x30 -#define FLASH_PADS_MASK 0x07 -#define NAND_PADS_DISABLE BIT(2) -#define PFLASH_PADS_DISABLE BIT(1) -#define SFLASH_PADS_DISABLE BIT(0) - static const struct of_device_id syscon_match[] = { { .compatible = "cortina,gemini-syscon" }, { }, @@ -102,15 +95,6 @@ int of_flash_probe_gemini(struct platform_device *pdev, map->bankwidth * 8); } - /* Activate parallel (NOR flash) mode */ - ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL, - FLASH_PADS_MASK, - SFLASH_PADS_DISABLE | NAND_PADS_DISABLE); - if (ret) { - dev_err(dev, "unable to set up physmap pads\n"); - return -ENODEV; - } - dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n"); return 0; diff --git a/drivers/mtd/maps/physmap_of_versatile.c b/drivers/mtd/maps/physmap_of_versatile.c index 8c6ccded9be8..03f2b6e7bc7e 100644 --- a/drivers/mtd/maps/physmap_of_versatile.c +++ b/drivers/mtd/maps/physmap_of_versatile.c @@ -97,7 +97,7 @@ static const struct of_device_id ebi_match[] = { static int ap_flash_init(struct platform_device *pdev) { struct device_node *ebi; - static void __iomem *ebi_base; + void __iomem *ebi_base; u32 val; int ret; diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c index 414956eca0c9..1e73bba6e286 100644 --- a/drivers/mtd/maps/sun_uflash.c +++ b/drivers/mtd/maps/sun_uflash.c @@ -55,8 +55,8 @@ int uflash_devinit(struct platform_device *op, struct device_node *dp) /* Non-CFI userflash device-- once I find one we * can work on supporting it. */ - printk(KERN_ERR PFX "Unsupported device at %s, 0x%llx\n", - dp->full_name, (unsigned long long)op->resource[0].start); + printk(KERN_ERR PFX "Unsupported device at %pOF, 0x%llx\n", + dp, (unsigned long long)op->resource[0].start); return -ENODEV; } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 956382cea256..e7ea842ba3db 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -339,7 +340,7 @@ static struct attribute *mtd_attrs[] = { }; ATTRIBUTE_GROUPS(mtd); -static struct device_type mtd_devtype = { +static const struct device_type mtd_devtype = { .name = "mtd", .groups = mtd_groups, .release = mtd_release, @@ -477,6 +478,8 @@ int mtd_pairing_groups(struct mtd_info *mtd) } EXPORT_SYMBOL_GPL(mtd_pairing_groups); +static struct dentry *dfs_dir_mtd; + /** * add_mtd_device - register an MTD device * @mtd: pointer to new MTD device info structure @@ -552,6 +555,14 @@ int add_mtd_device(struct mtd_info *mtd) if (error) goto fail_added; + if (!IS_ERR_OR_NULL(dfs_dir_mtd)) { + mtd->dbg.dfs_dir = debugfs_create_dir(dev_name(&mtd->dev), dfs_dir_mtd); + if (IS_ERR_OR_NULL(mtd->dbg.dfs_dir)) { + pr_debug("mtd device %s won't show data in debugfs\n", + dev_name(&mtd->dev)); + } + } + device_create(&mtd_class, mtd->dev.parent, MTD_DEVT(i) + 1, NULL, "mtd%dro", i); @@ -594,6 +605,8 @@ int del_mtd_device(struct mtd_info *mtd) mutex_lock(&mtd_table_mutex); + debugfs_remove_recursive(mtd->dbg.dfs_dir); + if (idr_find(&mtd_idr, mtd->index) != mtd) { ret = -ENODEV; goto out_error; @@ -1811,6 +1824,8 @@ static int __init init_mtd(void) if (ret) goto out_procfs; + dfs_dir_mtd = debugfs_create_dir("mtd", NULL); + return 0; out_procfs: @@ -1826,6 +1841,7 @@ err_reg: static void __exit cleanup_mtd(void) { + debugfs_remove_recursive(dfs_dir_mtd); cleanup_mtdchar(); if (proc_mtd) remove_proc_entry("mtd", NULL); diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c index f12879a3d4ff..7d9080e33865 100644 --- a/drivers/mtd/mtdswap.c +++ b/drivers/mtd/mtdswap.c @@ -138,8 +138,6 @@ struct mtdswap_dev { char *page_buf; char *oob_buf; - - struct dentry *debugfs_root; }; struct mtdswap_oobdata { @@ -1315,29 +1313,19 @@ static const struct file_operations mtdswap_fops = { static int mtdswap_add_debugfs(struct mtdswap_dev *d) { - struct gendisk *gd = d->mbd_dev->disk; - struct device *dev = disk_to_dev(gd); - - struct dentry *root; + struct dentry *root = d->mtd->dbg.dfs_dir; struct dentry *dent; - root = debugfs_create_dir(gd->disk_name, NULL); - if (IS_ERR(root)) + if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; - if (!root) { - dev_err(dev, "failed to initialize debugfs\n"); + if (IS_ERR_OR_NULL(root)) return -1; - } - d->debugfs_root = root; - - dent = debugfs_create_file("stats", S_IRUSR, root, d, + dent = debugfs_create_file("mtdswap_stats", S_IRUSR, root, d, &mtdswap_fops); if (!dent) { dev_err(d->dev, "debugfs_create_file failed\n"); - debugfs_remove_recursive(root); - d->debugfs_root = NULL; return -1; } @@ -1540,7 +1528,6 @@ static void mtdswap_remove_dev(struct mtd_blktrans_dev *dev) { struct mtdswap_dev *d = MTDSWAP_MBD_TO_MTDSWAP(dev); - debugfs_remove_recursive(d->debugfs_root); del_mtd_blktrans_dev(dev); mtdswap_cleanup(d); kfree(d); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index dbfa72d61d5a..3f2036f31da4 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -315,7 +315,7 @@ config MTD_NAND_ATMEL config MTD_NAND_PXA3xx tristate "NAND support on PXA3xx and Armada 370/XP" - depends on PXA3xx || ARCH_MMP || PLAT_ORION + depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU help This enables the driver for the NAND flash device found on PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2). diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 5d6c26f3cf7f..dcec9cf4983f 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c index 1913ce18fb1c..f25eca79f4e5 100644 --- a/drivers/mtd/nand/atmel/nand-controller.c +++ b/drivers/mtd/nand/atmel/nand-controller.c @@ -59,7 +59,7 @@ #include #include #include -#include +#include #include #include #include @@ -2091,8 +2091,8 @@ atmel_hsmc_nand_controller_legacy_init(struct atmel_hsmc_nand_controller *nc) } nc->irq = of_irq_get(nand_np, 0); - if (nc->irq < 0) { - ret = nc->irq; + if (nc->irq <= 0) { + ret = nc->irq ?: -ENXIO; if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to get IRQ number (err = %d)\n", ret); @@ -2183,11 +2183,12 @@ atmel_hsmc_nand_controller_init(struct atmel_hsmc_nand_controller *nc) nc->irq = of_irq_get(np, 0); of_node_put(np); - if (nc->irq < 0) { - if (nc->irq != -EPROBE_DEFER) + if (nc->irq <= 0) { + ret = nc->irq ?: -ENXIO; + if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to get IRQ number (err = %d)\n", - nc->irq); - return nc->irq; + ret); + return ret; } np = of_parse_phandle(dev->of_node, "atmel,nfc-io", 0); diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c index 8c210a5776bc..146af8218314 100644 --- a/drivers/mtd/nand/atmel/pmecc.c +++ b/drivers/mtd/nand/atmel/pmecc.c @@ -47,7 +47,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 9bf6d9915694..9d4a28fa6b73 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h index 8ea75710a854..c8834767ab6d 100644 --- a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h +++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h @@ -6,7 +6,7 @@ #endif #include -#include +#include struct bcm47xxnflash { struct bcma_drv_cc *cc; diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 3962f55bd034..5655dca6ce43 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -49,7 +49,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index 7419c5ce63f8..e0eb51d8c012 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 2fd733eba0a3..bc558c438a57 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -13,7 +13,7 @@ #include #undef DEBUG #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 949b9400dcb7..1fc435f994e1 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -18,7 +18,7 @@ * CM-X270 board. */ -#include +#include #include #include #include diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 594b28684138..d48877540f14 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 7b26e53b95b1..ccc8c43abcff 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 237cc706b0fb..9239e6793e6e 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -21,7 +21,7 @@ #define __DENALI_H__ #include -#include +#include #define DEVICE_RESET 0x0 #define DEVICE_RESET__BANK(bank) BIT(bank) diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index 47f398edf18f..56e2e177644d 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -118,7 +118,9 @@ static int denali_dt_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no clk available\n"); return PTR_ERR(dt->clk); } - clk_prepare_enable(dt->clk); + ret = clk_prepare_enable(dt->clk); + if (ret) + return ret; denali->clk_x_rate = clk_get_rate(dt->clk); diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index a023ab9e9cbf..c3aa53caab5c 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index a27a84fbfb84..2436cbc71662 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -41,7 +41,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index b9ac16f05057..17db2f90aa2c 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 59408ec2c69f..9e03bac7f34c 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index d85fa2555b68..a88e2cf66e0f 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 9d8b051d3187..eac15d9bf49e 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index 85294f150f4f..fd3648952b5a 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index 9df0ad64e7e0..a45e4ce13d10 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -17,7 +17,7 @@ #ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H #define __DRIVERS_MTD_NAND_GPMI_NAND_H -#include +#include #include #include #include diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c index 530caa80b1b6..d9ee1a7e6956 100644 --- a/drivers/mtd/nand/hisi504_nand.c +++ b/drivers/mtd/nand/hisi504_nand.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index 0d06a1f07d82..ad827d4af3e9 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c index 8bc835f71b26..e69f6ae4c539 100644 --- a/drivers/mtd/nand/jz4780_nand.c +++ b/drivers/mtd/nand/jz4780_nand.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index 846a66c1b133..c3bb358ef01e 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include #include @@ -705,7 +705,9 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) res = -ENOENT; goto err_exit1; } - clk_prepare_enable(host->clk); + res = clk_prepare_enable(host->clk); + if (res) + goto err_exit1; nand_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl; nand_chip->dev_ready = lpc32xx_nand_device_ready; @@ -846,9 +848,12 @@ static int lpc32xx_nand_remove(struct platform_device *pdev) static int lpc32xx_nand_resume(struct platform_device *pdev) { struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + int ret; /* Re-enable NAND clock */ - clk_prepare_enable(host->clk); + ret = clk_prepare_enable(host->clk); + if (ret) + return ret; /* Fresh init of NAND controller */ lpc32xx_nand_setup(host); diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c index a0669a33f8fe..b61f28a1554d 100644 --- a/drivers/mtd/nand/lpc32xx_slc.c +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include @@ -840,7 +840,9 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) res = -ENOENT; goto err_exit1; } - clk_prepare_enable(host->clk); + res = clk_prepare_enable(host->clk); + if (res) + goto err_exit1; /* Set NAND IO addresses and command/ready functions */ chip->IO_ADDR_R = SLC_DATA(host->io_base); @@ -972,9 +974,12 @@ static int lpc32xx_nand_remove(struct platform_device *pdev) static int lpc32xx_nand_resume(struct platform_device *pdev) { struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + int ret; /* Re-enable NAND clock */ - clk_prepare_enable(host->clk); + ret = clk_prepare_enable(host->clk); + if (ret) + return ret; /* Fresh init of NAND controller */ lpc32xx_nand_setup(host); diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 0e86fb6277c3..b6b97cc9fba6 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index 6c3a4aab0b48..7f3b065b6b8f 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -464,8 +464,8 @@ static int mtk_ecc_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(dev, "failed to get irq\n"); - return -EINVAL; + dev_err(dev, "failed to get irq: %d\n", irq); + return irq; } ret = dma_set_mask(dev, DMA_BIT_MASK(32)); diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c index f7ae99464375..d86a7d131cc0 100644 --- a/drivers/mtd/nand/mtk_nand.c +++ b/drivers/mtd/nand/mtk_nand.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index a764d5ca7536..53e5e0337c3e 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include @@ -876,6 +876,8 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) } } +#define MXC_V1_ECCBYTES 5 + static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { @@ -885,7 +887,7 @@ static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section, return -ERANGE; oobregion->offset = (section * 16) + 6; - oobregion->length = nand_chip->ecc.bytes; + oobregion->length = MXC_V1_ECCBYTES; return 0; } @@ -907,8 +909,7 @@ static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section, oobregion->length = 4; } } else { - oobregion->offset = ((section - 1) * 16) + - nand_chip->ecc.bytes + 6; + oobregion->offset = ((section - 1) * 16) + MXC_V1_ECCBYTES + 6; if (section < nand_chip->ecc.steps) oobregion->length = (section * 16) + 6 - oobregion->offset; diff --git a/drivers/mtd/nand/nand_amd.c b/drivers/mtd/nand/nand_amd.c index 170403a3bfa8..22f060f38123 100644 --- a/drivers/mtd/nand/nand_amd.c +++ b/drivers/mtd/nand/nand_amd.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include +#include static void amd_nand_decode_id(struct nand_chip *chip) { diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index c6c18b82f8f4..bcc8cef1c615 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -39,7 +39,7 @@ #include #include #include -#include +#include #include #include #include @@ -1247,179 +1247,6 @@ int nand_reset(struct nand_chip *chip, int chipnr) return 0; } -/** - * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks - * @mtd: mtd info - * @ofs: offset to start unlock from - * @len: length to unlock - * @invert: - * - when = 0, unlock the range of blocks within the lower and - * upper boundary address - * - when = 1, unlock the range of blocks outside the boundaries - * of the lower and upper boundary address - * - * Returs unlock status. - */ -static int __nand_unlock(struct mtd_info *mtd, loff_t ofs, - uint64_t len, int invert) -{ - int ret = 0; - int status, page; - struct nand_chip *chip = mtd_to_nand(mtd); - - /* Submit address of first page to unlock */ - page = ofs >> chip->page_shift; - chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask); - - /* Submit address of last page to unlock */ - page = (ofs + len) >> chip->page_shift; - chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, - (page | invert) & chip->pagemask); - - /* Call wait ready function */ - status = chip->waitfunc(mtd, chip); - /* See if device thinks it succeeded */ - if (status & NAND_STATUS_FAIL) { - pr_debug("%s: error status = 0x%08x\n", - __func__, status); - ret = -EIO; - } - - return ret; -} - -/** - * nand_unlock - [REPLACEABLE] unlocks specified locked blocks - * @mtd: mtd info - * @ofs: offset to start unlock from - * @len: length to unlock - * - * Returns unlock status. - */ -int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - int ret = 0; - int chipnr; - struct nand_chip *chip = mtd_to_nand(mtd); - - pr_debug("%s: start = 0x%012llx, len = %llu\n", - __func__, (unsigned long long)ofs, len); - - if (check_offs_len(mtd, ofs, len)) - return -EINVAL; - - /* Align to last block address if size addresses end of the device */ - if (ofs + len == mtd->size) - len -= mtd->erasesize; - - nand_get_device(mtd, FL_UNLOCKING); - - /* Shift to get chip number */ - chipnr = ofs >> chip->chip_shift; - - /* - * Reset the chip. - * If we want to check the WP through READ STATUS and check the bit 7 - * we must reset the chip - * some operation can also clear the bit 7 of status register - * eg. erase/program a locked block - */ - nand_reset(chip, chipnr); - - chip->select_chip(mtd, chipnr); - - /* Check, if it is write protected */ - if (nand_check_wp(mtd)) { - pr_debug("%s: device is write protected!\n", - __func__); - ret = -EIO; - goto out; - } - - ret = __nand_unlock(mtd, ofs, len, 0); - -out: - chip->select_chip(mtd, -1); - nand_release_device(mtd); - - return ret; -} -EXPORT_SYMBOL(nand_unlock); - -/** - * nand_lock - [REPLACEABLE] locks all blocks present in the device - * @mtd: mtd info - * @ofs: offset to start unlock from - * @len: length to unlock - * - * This feature is not supported in many NAND parts. 'Micron' NAND parts do - * have this feature, but it allows only to lock all blocks, not for specified - * range for block. Implementing 'lock' feature by making use of 'unlock', for - * now. - * - * Returns lock status. - */ -int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - int ret = 0; - int chipnr, status, page; - struct nand_chip *chip = mtd_to_nand(mtd); - - pr_debug("%s: start = 0x%012llx, len = %llu\n", - __func__, (unsigned long long)ofs, len); - - if (check_offs_len(mtd, ofs, len)) - return -EINVAL; - - nand_get_device(mtd, FL_LOCKING); - - /* Shift to get chip number */ - chipnr = ofs >> chip->chip_shift; - - /* - * Reset the chip. - * If we want to check the WP through READ STATUS and check the bit 7 - * we must reset the chip - * some operation can also clear the bit 7 of status register - * eg. erase/program a locked block - */ - nand_reset(chip, chipnr); - - chip->select_chip(mtd, chipnr); - - /* Check, if it is write protected */ - if (nand_check_wp(mtd)) { - pr_debug("%s: device is write protected!\n", - __func__); - status = MTD_ERASE_FAILED; - ret = -EIO; - goto out; - } - - /* Submit address of first page to lock */ - page = ofs >> chip->page_shift; - chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask); - - /* Call wait ready function */ - status = chip->waitfunc(mtd, chip); - /* See if device thinks it succeeded */ - if (status & NAND_STATUS_FAIL) { - pr_debug("%s: error status = 0x%08x\n", - __func__, status); - ret = -EIO; - goto out; - } - - ret = __nand_unlock(mtd, ofs, len, 0x1); - -out: - chip->select_chip(mtd, -1); - nand_release_device(mtd); - - return ret; -} -EXPORT_SYMBOL(nand_lock); - /** * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data * @buf: buffer to test @@ -3993,10 +3820,13 @@ static void nand_manufacturer_detect(struct nand_chip *chip) * nand_decode_ext_id() otherwise. */ if (chip->manufacturer.desc && chip->manufacturer.desc->ops && - chip->manufacturer.desc->ops->detect) + chip->manufacturer.desc->ops->detect) { + /* The 3rd id byte holds MLC / multichip data */ + chip->bits_per_cell = nand_get_bits_per_cell(chip->id.data[2]); chip->manufacturer.desc->ops->detect(chip); - else + } else { nand_decode_ext_id(chip); + } } /* @@ -4036,7 +3866,7 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type) const struct nand_manufacturer *manufacturer; struct mtd_info *mtd = nand_to_mtd(chip); int busw; - int i, ret; + int i; u8 *id_data = chip->id.data; u8 maf_id, dev_id; @@ -4066,7 +3896,7 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type) chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read entire ID string */ - for (i = 0; i < 8; i++) + for (i = 0; i < ARRAY_SIZE(chip->id.data); i++) id_data[i] = chip->read_byte(mtd); if (id_data[0] != maf_id || id_data[1] != dev_id) { @@ -4075,7 +3905,7 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type) return -ENODEV; } - chip->id.len = nand_id_len(id_data, 8); + chip->id.len = nand_id_len(id_data, ARRAY_SIZE(chip->id.data)); /* Try to identify manufacturer */ manufacturer = nand_get_manufacturer(maf_id); @@ -4177,10 +4007,6 @@ ident_done: if (mtd->writesize > 512 && chip->cmdfunc == nand_command) chip->cmdfunc = nand_command_lp; - ret = nand_manufacturer_init(chip); - if (ret) - return ret; - pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", maf_id, dev_id); @@ -4388,23 +4214,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, return ret; } - /* Initialize the ->data_interface field. */ - ret = nand_init_data_interface(chip); - if (ret) - goto err_nand_init; - - /* - * Setup the data interface correctly on the chip and controller side. - * This explicit call to nand_setup_data_interface() is only required - * for the first die, because nand_reset() has been called before - * ->data_interface and ->default_onfi_timing_mode were set. - * For the other dies, nand_reset() will automatically switch to the - * best mode for us. - */ - ret = nand_setup_data_interface(chip, 0); - if (ret) - goto err_nand_init; - nand_maf_id = chip->id.data[0]; nand_dev_id = chip->id.data[1]; @@ -4434,12 +4243,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, mtd->size = i * chip->chipsize; return 0; - -err_nand_init: - /* Free manufacturer priv data. */ - nand_manufacturer_cleanup(chip); - - return ret; } EXPORT_SYMBOL(nand_scan_ident); @@ -4826,55 +4629,60 @@ int nand_scan_tail(struct mtd_info *mtd) struct nand_chip *chip = mtd_to_nand(mtd); struct nand_ecc_ctrl *ecc = &chip->ecc; struct nand_buffers *nbuf = NULL; - int ret; + int ret, i; /* New bad blocks should be marked in OOB, flash-based BBT, or both */ if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && !(chip->bbt_options & NAND_BBT_USE_FLASH))) { - ret = -EINVAL; - goto err_ident; + return -EINVAL; } if (invalid_ecc_page_accessors(chip)) { pr_err("Invalid ECC page accessors setup\n"); - ret = -EINVAL; - goto err_ident; + return -EINVAL; } if (!(chip->options & NAND_OWN_BUFFERS)) { nbuf = kzalloc(sizeof(*nbuf), GFP_KERNEL); - if (!nbuf) { - ret = -ENOMEM; - goto err_ident; - } + if (!nbuf) + return -ENOMEM; nbuf->ecccalc = kmalloc(mtd->oobsize, GFP_KERNEL); if (!nbuf->ecccalc) { ret = -ENOMEM; - goto err_free; + goto err_free_nbuf; } nbuf->ecccode = kmalloc(mtd->oobsize, GFP_KERNEL); if (!nbuf->ecccode) { ret = -ENOMEM; - goto err_free; + goto err_free_nbuf; } nbuf->databuf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); if (!nbuf->databuf) { ret = -ENOMEM; - goto err_free; + goto err_free_nbuf; } chip->buffers = nbuf; - } else { - if (!chip->buffers) { - ret = -ENOMEM; - goto err_ident; - } + } else if (!chip->buffers) { + return -ENOMEM; } + /* + * FIXME: some NAND manufacturer drivers expect the first die to be + * selected when manufacturer->init() is called. They should be fixed + * to explictly select the relevant die when interacting with the NAND + * chip. + */ + chip->select_chip(mtd, 0); + ret = nand_manufacturer_init(chip); + chip->select_chip(mtd, -1); + if (ret) + goto err_free_nbuf; + /* Set the internal oob buffer location, just after the page data */ chip->oob_poi = chip->buffers->databuf + mtd->writesize; @@ -4896,7 +4704,7 @@ int nand_scan_tail(struct mtd_info *mtd) WARN(1, "No oob scheme defined for oobsize %d\n", mtd->oobsize); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } } @@ -4911,7 +4719,7 @@ int nand_scan_tail(struct mtd_info *mtd) if (!ecc->calculate || !ecc->correct || !ecc->hwctl) { WARN(1, "No ECC functions supplied; hardware ECC not possible\n"); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } if (!ecc->read_page) ecc->read_page = nand_read_page_hwecc_oob_first; @@ -4943,7 +4751,7 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->write_page == nand_write_page_hwecc)) { WARN(1, "No ECC functions supplied; hardware ECC not possible\n"); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } /* Use standard syndrome read/write page function? */ if (!ecc->read_page) @@ -4963,7 +4771,7 @@ int nand_scan_tail(struct mtd_info *mtd) if (!ecc->strength) { WARN(1, "Driver must set ecc.strength when using hardware ECC\n"); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } break; } @@ -4976,7 +4784,7 @@ int nand_scan_tail(struct mtd_info *mtd) ret = nand_set_ecc_soft_ops(mtd); if (ret) { ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } break; @@ -4984,7 +4792,7 @@ int nand_scan_tail(struct mtd_info *mtd) if (!ecc->read_page || !ecc->write_page) { WARN(1, "No ECC functions supplied; on-die ECC not possible\n"); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } if (!ecc->read_oob) ecc->read_oob = nand_read_oob_std; @@ -5008,7 +4816,7 @@ int nand_scan_tail(struct mtd_info *mtd) default: WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } /* For many systems, the standard OOB write also works for raw */ @@ -5029,13 +4837,13 @@ int nand_scan_tail(struct mtd_info *mtd) if (ecc->steps * ecc->size != mtd->writesize) { WARN(1, "Invalid ECC parameters\n"); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } ecc->total = ecc->steps * ecc->bytes; if (ecc->total > mtd->oobsize) { WARN(1, "Total number of ECC bytes exceeded oobsize\n"); ret = -EINVAL; - goto err_free; + goto err_nand_manuf_cleanup; } /* @@ -5117,6 +4925,21 @@ int nand_scan_tail(struct mtd_info *mtd) if (!mtd->bitflip_threshold) mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4); + /* Initialize the ->data_interface field. */ + ret = nand_init_data_interface(chip); + if (ret) + goto err_nand_manuf_cleanup; + + /* Enter fastest possible mode on all dies. */ + for (i = 0; i < chip->numchips; i++) { + chip->select_chip(mtd, i); + ret = nand_setup_data_interface(chip, i); + chip->select_chip(mtd, -1); + + if (ret) + goto err_nand_data_iface_cleanup; + } + /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) return 0; @@ -5124,10 +4947,17 @@ int nand_scan_tail(struct mtd_info *mtd) /* Build bad block table */ ret = chip->scan_bbt(mtd); if (ret) - goto err_free; + goto err_nand_data_iface_cleanup; + return 0; -err_free: +err_nand_data_iface_cleanup: + nand_release_data_interface(chip); + +err_nand_manuf_cleanup: + nand_manufacturer_cleanup(chip); + +err_free_nbuf: if (nbuf) { kfree(nbuf->databuf); kfree(nbuf->ecccode); @@ -5135,12 +4965,6 @@ err_free: kfree(nbuf); } -err_ident: - /* Clean up nand_scan_ident(). */ - - /* Free manufacturer priv data. */ - nand_manufacturer_cleanup(chip); - return ret; } EXPORT_SYMBOL(nand_scan_tail); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 7695efea65f2..2915b6739bf8 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -61,7 +61,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c index 44763f87eae4..505441c9373b 100644 --- a/drivers/mtd/nand/nand_bch.c +++ b/drivers/mtd/nand/nand_bch.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index d1770b066396..7613a0388044 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -43,7 +43,7 @@ #include #include #include -#include +#include #include #include #else diff --git a/drivers/mtd/nand/nand_hynix.c b/drivers/mtd/nand/nand_hynix.c index b12dc7325378..985751eda317 100644 --- a/drivers/mtd/nand/nand_hynix.c +++ b/drivers/mtd/nand/nand_hynix.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include +#include #include #include @@ -477,7 +477,7 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip, * The ECC requirements field meaning depends on the * NAND technology. */ - u8 nand_tech = chip->id.data[5] & 0x3; + u8 nand_tech = chip->id.data[5] & 0x7; if (nand_tech < 3) { /* > 26nm, reference: H27UBG8T2A datasheet */ @@ -533,7 +533,7 @@ static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip, if (nand_tech > 0) chip->options |= NAND_NEED_SCRAMBLING; } else { - nand_tech = chip->id.data[5] & 0x3; + nand_tech = chip->id.data[5] & 0x7; /* < 32nm */ if (nand_tech > 2) diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 92e2cf8e9ff9..5423c3bb388e 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -6,7 +6,7 @@ * published by the Free Software Foundation. * */ -#include +#include #include #define LP_OPTIONS 0 diff --git a/drivers/mtd/nand/nand_macronix.c b/drivers/mtd/nand/nand_macronix.c index 84855c3e1a02..d290ff2a6d2f 100644 --- a/drivers/mtd/nand/nand_macronix.c +++ b/drivers/mtd/nand/nand_macronix.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include +#include static int macronix_nand_init(struct nand_chip *chip) { diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c index c30ab60f8e1b..abf6a3c376e8 100644 --- a/drivers/mtd/nand/nand_micron.c +++ b/drivers/mtd/nand/nand_micron.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include +#include /* * Special Micron status bit that indicates when the block has been diff --git a/drivers/mtd/nand/nand_samsung.c b/drivers/mtd/nand/nand_samsung.c index 1e0755997762..d348f0129ae7 100644 --- a/drivers/mtd/nand/nand_samsung.c +++ b/drivers/mtd/nand/nand_samsung.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include +#include static void samsung_nand_decode_id(struct nand_chip *chip) { diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c index 7e36d7d13c26..5d1533bcc5bd 100644 --- a/drivers/mtd/nand/nand_timings.c +++ b/drivers/mtd/nand/nand_timings.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include static const struct nand_data_interface onfi_sdr_timings[] = { /* Mode 0 */ diff --git a/drivers/mtd/nand/nand_toshiba.c b/drivers/mtd/nand/nand_toshiba.c index fa787ba38dcd..57df857074e6 100644 --- a/drivers/mtd/nand/nand_toshiba.c +++ b/drivers/mtd/nand/nand_toshiba.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include +#include static void toshiba_nand_decode_id(struct nand_chip *chip) { diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index e4211c3cc49b..fec613221958 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include @@ -287,11 +287,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should " /* Maximum page cache pages needed to read or write a NAND page to the cache_file */ #define NS_MAX_HELD_PAGES 16 -struct nandsim_debug_info { - struct dentry *dfs_root; - struct dentry *dfs_wear_report; -}; - /* * A union to represent flash memory contents and flash buffer. */ @@ -370,8 +365,6 @@ struct nandsim { void *file_buf; struct page *held_pages[NS_MAX_HELD_PAGES]; int held_cnt; - - struct nandsim_debug_info dbg; }; /* @@ -524,39 +517,23 @@ static const struct file_operations dfs_fops = { */ static int nandsim_debugfs_create(struct nandsim *dev) { - struct nandsim_debug_info *dbg = &dev->dbg; + struct dentry *root = nsmtd->dbg.dfs_dir; struct dentry *dent; if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; - dent = debugfs_create_dir("nandsim", NULL); - if (!dent) { - NS_ERR("cannot create \"nandsim\" debugfs directory\n"); - return -ENODEV; - } - dbg->dfs_root = dent; + if (IS_ERR_OR_NULL(root)) + return -1; - dent = debugfs_create_file("wear_report", S_IRUSR, - dbg->dfs_root, dev, &dfs_fops); - if (!dent) - goto out_remove; - dbg->dfs_wear_report = dent; + dent = debugfs_create_file("nandsim_wear_report", S_IRUSR, + root, dev, &dfs_fops); + if (IS_ERR_OR_NULL(dent)) { + NS_ERR("cannot create \"nandsim_wear_report\" debugfs entry\n"); + return -1; + } return 0; - -out_remove: - debugfs_remove_recursive(dbg->dfs_root); - return -ENODEV; -} - -/** - * nandsim_debugfs_remove - destroy all debugfs files - */ -static void nandsim_debugfs_remove(struct nandsim *ns) -{ - if (IS_ENABLED(CONFIG_DEBUG_FS)) - debugfs_remove_recursive(ns->dbg.dfs_root); } /* @@ -2352,9 +2329,6 @@ static int __init ns_init_module(void) if ((retval = setup_wear_reporting(nsmtd)) != 0) goto err_exit; - if ((retval = nandsim_debugfs_create(nand)) != 0) - goto err_exit; - if ((retval = init_nandsim(nsmtd)) != 0) goto err_exit; @@ -2370,10 +2344,12 @@ static int __init ns_init_module(void) if (retval != 0) goto err_exit; + if ((retval = nandsim_debugfs_create(nand)) != 0) + goto err_exit; + return 0; err_exit: - nandsim_debugfs_remove(nand); free_nandsim(nand); nand_release(nsmtd); for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i) @@ -2396,7 +2372,6 @@ static void __exit ns_cleanup_module(void) struct nandsim *ns = nand_get_controller_data(chip); int i; - nandsim_debugfs_remove(ns); free_nandsim(ns); /* Free nandsim private resources */ nand_release(nsmtd); /* Unregister driver */ for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i) diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 28e6118362f7..d8a806894937 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -22,7 +22,7 @@ * */ #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c index 8f64011d32ef..7bb4d2ea9342 100644 --- a/drivers/mtd/nand/nuc900_nand.c +++ b/drivers/mtd/nand/nuc900_nand.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #define REG_FMICSR 0x00 diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 084934a9f19c..54540c8fa1a2 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 209170ed2b76..5a5aa1f07d07 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include @@ -54,13 +54,16 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { struct nand_chip *chip = mtd_to_nand(mtd); void __iomem *io_base = chip->IO_ADDR_R; +#if __LINUX_ARM_ARCH__ >= 5 uint64_t *buf64; +#endif int i = 0; while (len && (unsigned long)buf & 7) { *buf++ = readb(io_base); len--; } +#if __LINUX_ARM_ARCH__ >= 5 buf64 = (uint64_t *)buf; while (i < len/8) { /* @@ -74,6 +77,10 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) buf64[i++] = x; } i *= 8; +#else + readsl(io_base, buf, len/4); + i = len / 4 * 4; +#endif while (i < len) buf[i++] = readb(io_base); } diff --git a/drivers/mtd/nand/oxnas_nand.c b/drivers/mtd/nand/oxnas_nand.c index 1b207aac840c..d649d5944826 100644 --- a/drivers/mtd/nand/oxnas_nand.c +++ b/drivers/mtd/nand/oxnas_nand.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include @@ -112,14 +112,19 @@ static int oxnas_nand_probe(struct platform_device *pdev) if (count > 1) return -EINVAL; - clk_prepare_enable(oxnas->clk); + err = clk_prepare_enable(oxnas->clk); + if (err) + return err; + device_reset_optional(&pdev->dev); for_each_child_of_node(np, nand_np) { chip = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; + if (!chip) { + err = -ENOMEM; + goto err_clk_unprepare; + } chip->controller = &oxnas->base; @@ -139,12 +144,12 @@ static int oxnas_nand_probe(struct platform_device *pdev) /* Scan to find existence of the device */ err = nand_scan(mtd, 1); if (err) - return err; + goto err_clk_unprepare; err = mtd_device_register(mtd, NULL, 0); if (err) { nand_release(mtd); - return err; + goto err_clk_unprepare; } oxnas->chips[nchips] = chip; @@ -152,12 +157,18 @@ static int oxnas_nand_probe(struct platform_device *pdev) } /* Exit if no chips found */ - if (!nchips) - return -ENODEV; + if (!nchips) { + err = -ENODEV; + goto err_clk_unprepare; + } platform_set_drvdata(pdev, oxnas); return 0; + +err_clk_unprepare: + clk_disable_unprepare(oxnas->clk); + return err; } static int oxnas_nand_remove(struct platform_device *pdev) diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 074b8b01289e..a47a7e4bd25a 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 791de3e4bbb6..925a1323604d 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include struct plat_nand_data { diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 74dae4bbdac8..85cff68643e0 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index 88af7145a51a..3baddfc997d1 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include @@ -53,6 +53,8 @@ #define NAND_VERSION 0xf08 #define NAND_READ_LOCATION_0 0xf20 #define NAND_READ_LOCATION_1 0xf24 +#define NAND_READ_LOCATION_2 0xf28 +#define NAND_READ_LOCATION_3 0xf2c /* dummy register offsets, used by write_reg_dma */ #define NAND_DEV_CMD1_RESTORE 0xdead @@ -109,7 +111,11 @@ #define READ_ADDR 0 /* NAND_DEV_CMD_VLD bits */ -#define READ_START_VLD 0 +#define READ_START_VLD BIT(0) +#define READ_STOP_VLD BIT(1) +#define WRITE_START_VLD BIT(2) +#define ERASE_START_VLD BIT(3) +#define SEQ_READ_START_VLD BIT(4) /* NAND_EBI2_ECC_BUF_CFG bits */ #define NUM_STEPS 0 @@ -131,6 +137,11 @@ #define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED) #define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED) +/* NAND_READ_LOCATION_n bits */ +#define READ_LOCATION_OFFSET 0 +#define READ_LOCATION_SIZE 16 +#define READ_LOCATION_LAST 31 + /* Version Mask */ #define NAND_VERSION_MAJOR_MASK 0xf0000000 #define NAND_VERSION_MAJOR_SHIFT 28 @@ -148,6 +159,13 @@ #define FETCH_ID 0xb #define RESET_DEVICE 0xd +/* Default Value for NAND_DEV_CMD_VLD */ +#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ + ERASE_START_VLD | SEQ_READ_START_VLD) + +/* NAND_CTRL bits */ +#define BAM_MODE_EN BIT(0) + /* * the NAND controller performs reads/writes with ECC in 516 byte chunks. * the driver calls the chunks 'step' or 'codeword' interchangeably @@ -169,11 +187,81 @@ #define ECC_BCH_4BIT BIT(2) #define ECC_BCH_8BIT BIT(3) +#define nandc_set_read_loc(nandc, reg, offset, size, is_last) \ +nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \ + ((offset) << READ_LOCATION_OFFSET) | \ + ((size) << READ_LOCATION_SIZE) | \ + ((is_last) << READ_LOCATION_LAST)) + +/* + * Returns the actual register address for all NAND_DEV_ registers + * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD) + */ +#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) + +#define QPIC_PER_CW_CMD_SGL 32 +#define QPIC_PER_CW_DATA_SGL 8 + +/* + * Flags used in DMA descriptor preparation helper functions + * (i.e. read_reg_dma/write_reg_dma/read_data_dma/write_data_dma) + */ +/* Don't set the EOT in current tx BAM sgl */ +#define NAND_BAM_NO_EOT BIT(0) +/* Set the NWD flag in current BAM sgl */ +#define NAND_BAM_NWD BIT(1) +/* Finish writing in the current BAM sgl and start writing in another BAM sgl */ +#define NAND_BAM_NEXT_SGL BIT(2) +/* + * Erased codeword status is being used two times in single transfer so this + * flag will determine the current value of erased codeword status register + */ +#define NAND_ERASED_CW_SET BIT(4) + +/* + * This data type corresponds to the BAM transaction which will be used for all + * NAND transfers. + * @cmd_sgl - sgl for NAND BAM command pipe + * @data_sgl - sgl for NAND BAM consumer/producer pipe + * @cmd_sgl_pos - current index in command sgl. + * @cmd_sgl_start - start index in command sgl. + * @tx_sgl_pos - current index in data sgl for tx. + * @tx_sgl_start - start index in data sgl for tx. + * @rx_sgl_pos - current index in data sgl for rx. + * @rx_sgl_start - start index in data sgl for rx. + */ +struct bam_transaction { + struct scatterlist *cmd_sgl; + struct scatterlist *data_sgl; + u32 cmd_sgl_pos; + u32 cmd_sgl_start; + u32 tx_sgl_pos; + u32 tx_sgl_start; + u32 rx_sgl_pos; + u32 rx_sgl_start; +}; + +/* + * This data type corresponds to the nand dma descriptor + * @list - list for desc_info + * @dir - DMA transfer direction + * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by + * ADM + * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM + * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM + * @dma_desc - low level DMA engine descriptor + */ struct desc_info { struct list_head node; enum dma_data_direction dir; - struct scatterlist sgl; + union { + struct scatterlist adm_sgl; + struct { + struct scatterlist *bam_sgl; + int sgl_cnt; + }; + }; struct dma_async_tx_descriptor *dma_desc; }; @@ -202,6 +290,13 @@ struct nandc_regs { __le32 orig_vld; __le32 ecc_buf_cfg; + __le32 read_location0; + __le32 read_location1; + __le32 read_location2; + __le32 read_location3; + + __le32 erased_cw_detect_cfg_clr; + __le32 erased_cw_detect_cfg_set; }; /* @@ -226,14 +321,17 @@ struct nandc_regs { * by upper layers directly * @buf_size/count/start: markers for chip->read_buf/write_buf functions * @reg_read_buf: local buffer for reading back registers via DMA + * @reg_read_dma: contains dma address for register read buffer * @reg_read_pos: marker for data read in reg_read_buf * * @regs: a contiguous chunk of memory for DMA register * writes. contains the register values to be * written to controller * @cmd1/vld: some fixed controller register values - * @ecc_modes: supported ECC modes by the current controller, + * @props: properties of current NAND controller, * initialized via DT match data + * @max_cwperpage: maximum QPIC codewords required. calculated + * from all connected NAND devices pagesize */ struct qcom_nand_controller { struct nand_hw_control controller; @@ -247,23 +345,39 @@ struct qcom_nand_controller { struct clk *core_clk; struct clk *aon_clk; - struct dma_chan *chan; - unsigned int cmd_crci; - unsigned int data_crci; + union { + /* will be used only by QPIC for BAM DMA */ + struct { + struct dma_chan *tx_chan; + struct dma_chan *rx_chan; + struct dma_chan *cmd_chan; + }; + + /* will be used only by EBI2 for ADM DMA */ + struct { + struct dma_chan *chan; + unsigned int cmd_crci; + unsigned int data_crci; + }; + }; + struct list_head desc_list; + struct bam_transaction *bam_txn; u8 *data_buffer; int buf_size; int buf_count; int buf_start; + unsigned int max_cwperpage; __le32 *reg_read_buf; + dma_addr_t reg_read_dma; int reg_read_pos; struct nandc_regs *regs; u32 cmd1, vld; - u32 ecc_modes; + const struct qcom_nandc_props *props; }; /* @@ -316,6 +430,78 @@ struct qcom_nand_host { u32 clrreadstatus; }; +/* + * This data type corresponds to the NAND controller properties which varies + * among different NAND controllers. + * @ecc_modes - ecc mode for NAND + * @is_bam - whether NAND controller is using BAM + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset + */ +struct qcom_nandc_props { + u32 ecc_modes; + bool is_bam; + u32 dev_cmd_reg_start; +}; + +/* Frees the BAM transaction memory */ +static void free_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn = nandc->bam_txn; + + devm_kfree(nandc->dev, bam_txn); +} + +/* Allocates and Initializes the BAM transaction */ +static struct bam_transaction * +alloc_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn; + size_t bam_txn_size; + unsigned int num_cw = nandc->max_cwperpage; + void *bam_txn_buf; + + bam_txn_size = + sizeof(*bam_txn) + num_cw * + ((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + + (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL)); + + bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL); + if (!bam_txn_buf) + return NULL; + + bam_txn = bam_txn_buf; + bam_txn_buf += sizeof(*bam_txn); + + bam_txn->cmd_sgl = bam_txn_buf; + bam_txn_buf += + sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw; + + bam_txn->data_sgl = bam_txn_buf; + + return bam_txn; +} + +/* Clears the BAM transaction indexes */ +static void clear_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn = nandc->bam_txn; + + if (!nandc->props->is_bam) + return; + + bam_txn->cmd_sgl_pos = 0; + bam_txn->cmd_sgl_start = 0; + bam_txn->tx_sgl_pos = 0; + bam_txn->tx_sgl_start = 0; + bam_txn->rx_sgl_pos = 0; + bam_txn->rx_sgl_start = 0; + + sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage * + QPIC_PER_CW_CMD_SGL); + sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage * + QPIC_PER_CW_DATA_SGL); +} + static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip) { return container_of(chip, struct qcom_nand_host, chip); @@ -339,6 +525,24 @@ static inline void nandc_write(struct qcom_nand_controller *nandc, int offset, iowrite32(val, nandc->base + offset); } +static inline void nandc_read_buffer_sync(struct qcom_nand_controller *nandc, + bool is_cpu) +{ + if (!nandc->props->is_bam) + return; + + if (is_cpu) + dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + else + dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); +} + static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset) { switch (offset) { @@ -372,6 +576,14 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset) return ®s->orig_vld; case NAND_EBI2_ECC_BUF_CFG: return ®s->ecc_buf_cfg; + case NAND_READ_LOCATION_0: + return ®s->read_location0; + case NAND_READ_LOCATION_1: + return ®s->read_location1; + case NAND_READ_LOCATION_2: + return ®s->read_location2; + case NAND_READ_LOCATION_3: + return ®s->read_location3; default: return NULL; } @@ -446,11 +658,119 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read) nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus); nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus); nandc_set_reg(nandc, NAND_EXEC_CMD, 1); + + if (read) + nandc_set_read_loc(nandc, 0, 0, host->use_ecc ? + host->cw_data : host->cw_size, 1); } -static int prep_dma_desc(struct qcom_nand_controller *nandc, bool read, - int reg_off, const void *vaddr, int size, - bool flow_control) +/* + * Maps the scatter gather list for DMA transfer and forms the DMA descriptor + * for BAM. This descriptor will be added in the NAND DMA descriptor queue + * which will be submitted to DMA engine. + */ +static int prepare_bam_async_desc(struct qcom_nand_controller *nandc, + struct dma_chan *chan, + unsigned long flags) +{ + struct desc_info *desc; + struct scatterlist *sgl; + unsigned int sgl_cnt; + int ret; + struct bam_transaction *bam_txn = nandc->bam_txn; + enum dma_transfer_direction dir_eng; + struct dma_async_tx_descriptor *dma_desc; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return -ENOMEM; + + if (chan == nandc->cmd_chan) { + sgl = &bam_txn->cmd_sgl[bam_txn->cmd_sgl_start]; + sgl_cnt = bam_txn->cmd_sgl_pos - bam_txn->cmd_sgl_start; + bam_txn->cmd_sgl_start = bam_txn->cmd_sgl_pos; + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } else if (chan == nandc->tx_chan) { + sgl = &bam_txn->data_sgl[bam_txn->tx_sgl_start]; + sgl_cnt = bam_txn->tx_sgl_pos - bam_txn->tx_sgl_start; + bam_txn->tx_sgl_start = bam_txn->tx_sgl_pos; + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } else { + sgl = &bam_txn->data_sgl[bam_txn->rx_sgl_start]; + sgl_cnt = bam_txn->rx_sgl_pos - bam_txn->rx_sgl_start; + bam_txn->rx_sgl_start = bam_txn->rx_sgl_pos; + dir_eng = DMA_DEV_TO_MEM; + desc->dir = DMA_FROM_DEVICE; + } + + sg_mark_end(sgl + sgl_cnt - 1); + ret = dma_map_sg(nandc->dev, sgl, sgl_cnt, desc->dir); + if (ret == 0) { + dev_err(nandc->dev, "failure in mapping desc\n"); + kfree(desc); + return -ENOMEM; + } + + desc->sgl_cnt = sgl_cnt; + desc->bam_sgl = sgl; + + dma_desc = dmaengine_prep_slave_sg(chan, sgl, sgl_cnt, dir_eng, + flags); + + if (!dma_desc) { + dev_err(nandc->dev, "failure in prep desc\n"); + dma_unmap_sg(nandc->dev, sgl, sgl_cnt, desc->dir); + kfree(desc); + return -EINVAL; + } + + desc->dma_desc = dma_desc; + + list_add_tail(&desc->node, &nandc->desc_list); + + return 0; +} + +/* + * Prepares the data descriptor for BAM DMA which will be used for NAND + * data reads and writes. + */ +static int prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read, + const void *vaddr, + int size, unsigned int flags) +{ + int ret; + struct bam_transaction *bam_txn = nandc->bam_txn; + + if (read) { + sg_set_buf(&bam_txn->data_sgl[bam_txn->rx_sgl_pos], + vaddr, size); + bam_txn->rx_sgl_pos++; + } else { + sg_set_buf(&bam_txn->data_sgl[bam_txn->tx_sgl_pos], + vaddr, size); + bam_txn->tx_sgl_pos++; + + /* + * BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag + * is not set, form the DMA descriptor + */ + if (!(flags & NAND_BAM_NO_EOT)) { + ret = prepare_bam_async_desc(nandc, nandc->tx_chan, + DMA_PREP_INTERRUPT); + if (ret) + return ret; + } + } + + return 0; +} + +static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, + int reg_off, const void *vaddr, int size, + bool flow_control) { struct desc_info *desc; struct dma_async_tx_descriptor *dma_desc; @@ -463,7 +783,7 @@ static int prep_dma_desc(struct qcom_nand_controller *nandc, bool read, if (!desc) return -ENOMEM; - sgl = &desc->sgl; + sgl = &desc->adm_sgl; sg_init_one(sgl, vaddr, size); @@ -524,9 +844,10 @@ err: * * @first: offset of the first register in the contiguous block * @num_regs: number of registers to read + * @flags: flags to control DMA descriptor preparation */ static int read_reg_dma(struct qcom_nand_controller *nandc, int first, - int num_regs) + int num_regs, unsigned int flags) { bool flow_control = false; void *vaddr; @@ -535,11 +856,14 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first, if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) flow_control = true; + if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1) + first = dev_cmd_reg_addr(nandc, first); + size = num_regs * sizeof(u32); vaddr = nandc->reg_read_buf + nandc->reg_read_pos; nandc->reg_read_pos += num_regs; - return prep_dma_desc(nandc, true, first, vaddr, size, flow_control); + return prep_adm_dma_desc(nandc, true, first, vaddr, size, flow_control); } /* @@ -548,9 +872,10 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first, * * @first: offset of the first register in the contiguous block * @num_regs: number of registers to write + * @flags: flags to control DMA descriptor preparation */ static int write_reg_dma(struct qcom_nand_controller *nandc, int first, - int num_regs) + int num_regs, unsigned int flags) { bool flow_control = false; struct nandc_regs *regs = nandc->regs; @@ -562,15 +887,26 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first, if (first == NAND_FLASH_CMD) flow_control = true; - if (first == NAND_DEV_CMD1_RESTORE) - first = NAND_DEV_CMD1; + if (first == NAND_ERASED_CW_DETECT_CFG) { + if (flags & NAND_ERASED_CW_SET) + vaddr = ®s->erased_cw_detect_cfg_set; + else + vaddr = ®s->erased_cw_detect_cfg_clr; + } - if (first == NAND_DEV_CMD_VLD_RESTORE) - first = NAND_DEV_CMD_VLD; + if (first == NAND_EXEC_CMD) + flags |= NAND_BAM_NWD; + + if (first == NAND_DEV_CMD1_RESTORE || first == NAND_DEV_CMD1) + first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD1); + + if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD) + first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD); size = num_regs * sizeof(u32); - return prep_dma_desc(nandc, false, first, vaddr, size, flow_control); + return prep_adm_dma_desc(nandc, false, first, vaddr, size, + flow_control); } /* @@ -580,11 +916,15 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first, * @reg_off: offset within the controller's data buffer * @vaddr: virtual address of the buffer we want to write to * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation */ static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off, - const u8 *vaddr, int size) + const u8 *vaddr, int size, unsigned int flags) { - return prep_dma_desc(nandc, true, reg_off, vaddr, size, false); + if (nandc->props->is_bam) + return prep_bam_dma_desc_data(nandc, true, vaddr, size, flags); + + return prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false); } /* @@ -594,48 +934,84 @@ static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off, * @reg_off: offset within the controller's data buffer * @vaddr: virtual address of the buffer we want to read from * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation */ static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off, - const u8 *vaddr, int size) + const u8 *vaddr, int size, unsigned int flags) { - return prep_dma_desc(nandc, false, reg_off, vaddr, size, false); + if (nandc->props->is_bam) + return prep_bam_dma_desc_data(nandc, false, vaddr, size, flags); + + return prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false); } /* - * helper to prepare dma descriptors to configure registers needed for reading a - * codeword/step in a page + * Helper to prepare DMA descriptors for configuring registers + * before reading a NAND page. */ -static void config_cw_read(struct qcom_nand_controller *nandc) +static void config_nand_page_read(struct qcom_nand_controller *nandc) { - write_reg_dma(nandc, NAND_FLASH_CMD, 3); - write_reg_dma(nandc, NAND_DEV0_CFG0, 3); - write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1); - - write_reg_dma(nandc, NAND_EXEC_CMD, 1); - - read_reg_dma(nandc, NAND_FLASH_STATUS, 2); - read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1); + write_reg_dma(nandc, NAND_ADDR0, 2, 0); + write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); + write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0); + write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0); + write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, + NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL); } /* - * helpers to prepare dma descriptors used to configure registers needed for - * writing a codeword/step in a page + * Helper to prepare DMA descriptors for configuring registers + * before reading each codeword in NAND page. */ -static void config_cw_write_pre(struct qcom_nand_controller *nandc) +static void config_nand_cw_read(struct qcom_nand_controller *nandc) { - write_reg_dma(nandc, NAND_FLASH_CMD, 3); - write_reg_dma(nandc, NAND_DEV0_CFG0, 3); - write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1); + if (nandc->props->is_bam) + write_reg_dma(nandc, NAND_READ_LOCATION_0, 4, + NAND_BAM_NEXT_SGL); + + write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); + + read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0); + read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1, + NAND_BAM_NEXT_SGL); } -static void config_cw_write_post(struct qcom_nand_controller *nandc) +/* + * Helper to prepare dma descriptors to configure registers needed for reading a + * single codeword in page + */ +static void config_nand_single_cw_page_read(struct qcom_nand_controller *nandc) { - write_reg_dma(nandc, NAND_EXEC_CMD, 1); + config_nand_page_read(nandc); + config_nand_cw_read(nandc); +} - read_reg_dma(nandc, NAND_FLASH_STATUS, 1); +/* + * Helper to prepare DMA descriptors used to configure registers needed for + * before writing a NAND page. + */ +static void config_nand_page_write(struct qcom_nand_controller *nandc) +{ + write_reg_dma(nandc, NAND_ADDR0, 2, 0); + write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); + write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, + NAND_BAM_NEXT_SGL); +} - write_reg_dma(nandc, NAND_FLASH_STATUS, 1); - write_reg_dma(nandc, NAND_READ_STATUS, 1); +/* + * Helper to prepare DMA descriptors for configuring registers + * before writing each codeword in NAND page. + */ +static void config_nand_cw_write(struct qcom_nand_controller *nandc) +{ + write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); + + read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); + + write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0); + write_reg_dma(nandc, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL); } /* @@ -672,8 +1048,7 @@ static int nandc_param(struct qcom_nand_host *host) /* configure CMD1 and VLD for ONFI param probing */ nandc_set_reg(nandc, NAND_DEV_CMD_VLD, - (nandc->vld & ~(1 << READ_START_VLD)) - | 0 << READ_START_VLD); + (nandc->vld & ~READ_START_VLD)); nandc_set_reg(nandc, NAND_DEV_CMD1, (nandc->cmd1 & ~(0xFF << READ_ADDR)) | NAND_CMD_PARAM << READ_ADDR); @@ -682,21 +1057,22 @@ static int nandc_param(struct qcom_nand_host *host) nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1); nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld); + nandc_set_read_loc(nandc, 0, 0, 512, 1); - write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1); - write_reg_dma(nandc, NAND_DEV_CMD1, 1); + write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0); + write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL); nandc->buf_count = 512; memset(nandc->data_buffer, 0xff, nandc->buf_count); - config_cw_read(nandc); + config_nand_single_cw_page_read(nandc); read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, - nandc->buf_count); + nandc->buf_count, 0); /* restore CMD1 and VLD regs */ - write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1); - write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1); + write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0); + write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1, NAND_BAM_NEXT_SGL); return 0; } @@ -718,14 +1094,14 @@ static int erase_block(struct qcom_nand_host *host, int page_addr) nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus); nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus); - write_reg_dma(nandc, NAND_FLASH_CMD, 3); - write_reg_dma(nandc, NAND_DEV0_CFG0, 2); - write_reg_dma(nandc, NAND_EXEC_CMD, 1); + write_reg_dma(nandc, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); - read_reg_dma(nandc, NAND_FLASH_STATUS, 1); + read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); - write_reg_dma(nandc, NAND_FLASH_STATUS, 1); - write_reg_dma(nandc, NAND_READ_STATUS, 1); + write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0); + write_reg_dma(nandc, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL); return 0; } @@ -742,13 +1118,14 @@ static int read_id(struct qcom_nand_host *host, int column) nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); nandc_set_reg(nandc, NAND_ADDR0, column); nandc_set_reg(nandc, NAND_ADDR1, 0); - nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); + nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, + nandc->props->is_bam ? 0 : DM_EN); nandc_set_reg(nandc, NAND_EXEC_CMD, 1); - write_reg_dma(nandc, NAND_FLASH_CMD, 4); - write_reg_dma(nandc, NAND_EXEC_CMD, 1); + write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); - read_reg_dma(nandc, NAND_READ_ID, 1); + read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL); return 0; } @@ -762,10 +1139,10 @@ static int reset(struct qcom_nand_host *host) nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); nandc_set_reg(nandc, NAND_EXEC_CMD, 1); - write_reg_dma(nandc, NAND_FLASH_CMD, 1); - write_reg_dma(nandc, NAND_EXEC_CMD, 1); + write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); - read_reg_dma(nandc, NAND_FLASH_STATUS, 1); + read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); return 0; } @@ -775,12 +1152,43 @@ static int submit_descs(struct qcom_nand_controller *nandc) { struct desc_info *desc; dma_cookie_t cookie = 0; + struct bam_transaction *bam_txn = nandc->bam_txn; + int r; + + if (nandc->props->is_bam) { + if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) { + r = prepare_bam_async_desc(nandc, nandc->rx_chan, 0); + if (r) + return r; + } + + if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) { + r = prepare_bam_async_desc(nandc, nandc->tx_chan, + DMA_PREP_INTERRUPT); + if (r) + return r; + } + + if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) { + r = prepare_bam_async_desc(nandc, nandc->cmd_chan, 0); + if (r) + return r; + } + } list_for_each_entry(desc, &nandc->desc_list, node) cookie = dmaengine_submit(desc->dma_desc); - if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE) - return -ETIMEDOUT; + if (nandc->props->is_bam) { + dma_async_issue_pending(nandc->tx_chan); + dma_async_issue_pending(nandc->rx_chan); + + if (dma_sync_wait(nandc->cmd_chan, cookie) != DMA_COMPLETE) + return -ETIMEDOUT; + } else { + if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE) + return -ETIMEDOUT; + } return 0; } @@ -791,7 +1199,14 @@ static void free_descs(struct qcom_nand_controller *nandc) list_for_each_entry_safe(desc, n, &nandc->desc_list, node) { list_del(&desc->node); - dma_unmap_sg(nandc->dev, &desc->sgl, 1, desc->dir); + + if (nandc->props->is_bam) + dma_unmap_sg(nandc->dev, desc->bam_sgl, + desc->sgl_cnt, desc->dir); + else + dma_unmap_sg(nandc->dev, &desc->adm_sgl, 1, + desc->dir); + kfree(desc); } } @@ -800,8 +1215,7 @@ static void free_descs(struct qcom_nand_controller *nandc) static void clear_read_regs(struct qcom_nand_controller *nandc) { nandc->reg_read_pos = 0; - memset(nandc->reg_read_buf, 0, - MAX_REG_RD * sizeof(*nandc->reg_read_buf)); + nandc_read_buffer_sync(nandc, false); } static void pre_command(struct qcom_nand_host *host, int command) @@ -815,6 +1229,10 @@ static void pre_command(struct qcom_nand_host *host, int command) host->last_command = command; clear_read_regs(nandc); + + if (command == NAND_CMD_RESET || command == NAND_CMD_READID || + command == NAND_CMD_PARAM || command == NAND_CMD_ERASE1) + clear_bam_transaction(nandc); } /* @@ -831,6 +1249,7 @@ static void parse_erase_write_errors(struct qcom_nand_host *host, int command) int i; num_cw = command == NAND_CMD_PAGEPROG ? ecc->steps : 1; + nandc_read_buffer_sync(nandc, true); for (i = 0; i < num_cw; i++) { u32 flash_status = le32_to_cpu(nandc->reg_read_buf[i]); @@ -852,6 +1271,7 @@ static void post_command(struct qcom_nand_host *host, int command) switch (command) { case NAND_CMD_READID: + nandc_read_buffer_sync(nandc, true); memcpy(nandc->data_buffer, nandc->reg_read_buf, nandc->buf_count); break; @@ -1015,6 +1435,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf, int i; buf = (struct read_stats *)nandc->reg_read_buf; + nandc_read_buffer_sync(nandc, true); for (i = 0; i < ecc->steps; i++, buf++) { u32 flash, buffer, erased_cw; @@ -1102,6 +1523,8 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, struct nand_ecc_ctrl *ecc = &chip->ecc; int i, ret; + config_nand_page_read(nandc); + /* queue cmd descs for each codeword */ for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; @@ -1115,11 +1538,24 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, oob_size = host->ecc_bytes_hw + host->spare_bytes; } - config_cw_read(nandc); + if (nandc->props->is_bam) { + if (data_buf && oob_buf) { + nandc_set_read_loc(nandc, 0, 0, data_size, 0); + nandc_set_read_loc(nandc, 1, data_size, + oob_size, 1); + } else if (data_buf) { + nandc_set_read_loc(nandc, 0, 0, data_size, 1); + } else { + nandc_set_read_loc(nandc, 0, data_size, + oob_size, 1); + } + } + + config_nand_cw_read(nandc); if (data_buf) read_data_dma(nandc, FLASH_BUF_ACC, data_buf, - data_size); + data_size, 0); /* * when ecc is enabled, the controller doesn't read the real @@ -1135,7 +1571,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, *oob_buf++ = 0xff; read_data_dma(nandc, FLASH_BUF_ACC + data_size, - oob_buf, oob_size); + oob_buf, oob_size, 0); } if (data_buf) @@ -1175,9 +1611,9 @@ static int copy_last_cw(struct qcom_nand_host *host, int page) set_address(host, host->cw_size * (ecc->steps - 1), page); update_rw_regs(host, 1, true); - config_cw_read(nandc); + config_nand_single_cw_page_read(nandc); - read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size); + read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0); ret = submit_descs(nandc); if (ret) @@ -1200,6 +1636,7 @@ static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip, data_buf = buf; oob_buf = oob_required ? chip->oob_poi : NULL; + clear_bam_transaction(nandc); ret = read_page_ecc(host, data_buf, oob_buf); if (ret) { dev_err(nandc->dev, "failure to read page\n"); @@ -1219,12 +1656,16 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd, u8 *data_buf, *oob_buf; struct nand_ecc_ctrl *ecc = &chip->ecc; int i, ret; + int read_loc; data_buf = buf; oob_buf = chip->oob_poi; host->use_ecc = false; + + clear_bam_transaction(nandc); update_rw_regs(host, ecc->steps, true); + config_nand_page_read(nandc); for (i = 0; i < ecc->steps; i++) { int data_size1, data_size2, oob_size1, oob_size2; @@ -1243,21 +1684,35 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd, oob_size2 = host->ecc_bytes_hw + host->spare_bytes; } - config_cw_read(nandc); + if (nandc->props->is_bam) { + read_loc = 0; + nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0); + read_loc += data_size1; - read_data_dma(nandc, reg_off, data_buf, data_size1); + nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0); + read_loc += oob_size1; + + nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0); + read_loc += data_size2; + + nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1); + } + + config_nand_cw_read(nandc); + + read_data_dma(nandc, reg_off, data_buf, data_size1, 0); reg_off += data_size1; data_buf += data_size1; - read_data_dma(nandc, reg_off, oob_buf, oob_size1); + read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0); reg_off += oob_size1; oob_buf += oob_size1; - read_data_dma(nandc, reg_off, data_buf, data_size2); + read_data_dma(nandc, reg_off, data_buf, data_size2, 0); reg_off += data_size2; data_buf += data_size2; - read_data_dma(nandc, reg_off, oob_buf, oob_size2); + read_data_dma(nandc, reg_off, oob_buf, oob_size2, 0); oob_buf += oob_size2; } @@ -1280,6 +1735,7 @@ static int qcom_nandc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int ret; clear_read_regs(nandc); + clear_bam_transaction(nandc); host->use_ecc = true; set_address(host, 0, page); @@ -1303,12 +1759,14 @@ static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip, int i, ret; clear_read_regs(nandc); + clear_bam_transaction(nandc); data_buf = (u8 *)buf; oob_buf = chip->oob_poi; host->use_ecc = true; update_rw_regs(host, ecc->steps, false); + config_nand_page_write(nandc); for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; @@ -1322,9 +1780,9 @@ static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip, oob_size = ecc->bytes; } - config_cw_write_pre(nandc); - write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size); + write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size, + i == (ecc->steps - 1) ? NAND_BAM_NO_EOT : 0); /* * when ECC is enabled, we don't really need to write anything @@ -1337,10 +1795,10 @@ static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip, oob_buf += host->bbm_size; write_data_dma(nandc, FLASH_BUF_ACC + data_size, - oob_buf, oob_size); + oob_buf, oob_size, 0); } - config_cw_write_post(nandc); + config_nand_cw_write(nandc); data_buf += data_size; oob_buf += oob_size; @@ -1367,12 +1825,14 @@ static int qcom_nandc_write_page_raw(struct mtd_info *mtd, int i, ret; clear_read_regs(nandc); + clear_bam_transaction(nandc); data_buf = (u8 *)buf; oob_buf = chip->oob_poi; host->use_ecc = false; update_rw_regs(host, ecc->steps, false); + config_nand_page_write(nandc); for (i = 0; i < ecc->steps; i++) { int data_size1, data_size2, oob_size1, oob_size2; @@ -1391,24 +1851,25 @@ static int qcom_nandc_write_page_raw(struct mtd_info *mtd, oob_size2 = host->ecc_bytes_hw + host->spare_bytes; } - config_cw_write_pre(nandc); - - write_data_dma(nandc, reg_off, data_buf, data_size1); + write_data_dma(nandc, reg_off, data_buf, data_size1, + NAND_BAM_NO_EOT); reg_off += data_size1; data_buf += data_size1; - write_data_dma(nandc, reg_off, oob_buf, oob_size1); + write_data_dma(nandc, reg_off, oob_buf, oob_size1, + NAND_BAM_NO_EOT); reg_off += oob_size1; oob_buf += oob_size1; - write_data_dma(nandc, reg_off, data_buf, data_size2); + write_data_dma(nandc, reg_off, data_buf, data_size2, + NAND_BAM_NO_EOT); reg_off += data_size2; data_buf += data_size2; - write_data_dma(nandc, reg_off, oob_buf, oob_size2); + write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0); oob_buf += oob_size2; - config_cw_write_post(nandc); + config_nand_cw_write(nandc); } ret = submit_descs(nandc); @@ -1441,11 +1902,13 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, host->use_ecc = true; + clear_bam_transaction(nandc); ret = copy_last_cw(host, page); if (ret) return ret; clear_read_regs(nandc); + clear_bam_transaction(nandc); /* calculate the data and oob size for the last codeword/step */ data_size = ecc->size - ((ecc->steps - 1) << 2); @@ -1458,10 +1921,10 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, set_address(host, host->cw_size * (ecc->steps - 1), page); update_rw_regs(host, 1, false); - config_cw_write_pre(nandc); - write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, - data_size + oob_size); - config_cw_write_post(nandc); + config_nand_page_write(nandc); + write_data_dma(nandc, FLASH_BUF_ACC, + nandc->data_buffer, data_size + oob_size, 0); + config_nand_cw_write(nandc); ret = submit_descs(nandc); @@ -1498,6 +1961,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs) */ host->use_ecc = false; + clear_bam_transaction(nandc); ret = copy_last_cw(host, page); if (ret) goto err; @@ -1528,6 +1992,7 @@ static int qcom_nandc_block_markbad(struct mtd_info *mtd, loff_t ofs) int page, ret, status = 0; clear_read_regs(nandc); + clear_bam_transaction(nandc); /* * to mark the BBM as bad, we flash the entire last codeword with 0s. @@ -1543,9 +2008,10 @@ static int qcom_nandc_block_markbad(struct mtd_info *mtd, loff_t ofs) set_address(host, host->cw_size * (ecc->steps - 1), page); update_rw_regs(host, 1, false); - config_cw_write_pre(nandc); - write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, host->cw_size); - config_cw_write_post(nandc); + config_nand_page_write(nandc); + write_data_dma(nandc, FLASH_BUF_ACC, + nandc->data_buffer, host->cw_size, 0); + config_nand_cw_write(nandc); ret = submit_descs(nandc); @@ -1794,7 +2260,7 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host) * uses lesser bytes for ECC. If RS is used, the ECC bytes is * always 10 bytes */ - if (nandc->ecc_modes & ECC_BCH_4BIT) { + if (nandc->props->ecc_modes & ECC_BCH_4BIT) { /* BCH */ host->bch_enabled = true; ecc_mode = 0; @@ -1842,6 +2308,8 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host) mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops); cwperpage = mtd->writesize / ecc->size; + nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage, + cwperpage); /* * DATA_UD_BYTES varies based on whether the read/write command protects @@ -1893,7 +2361,7 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host) | wide_bus << WIDE_FLASH | 1 << DEV0_CFG1_ECC_DISABLE; - host->ecc_bch_cfg = host->bch_enabled << ECC_CFG_ECC_DISABLE + host->ecc_bch_cfg = !host->bch_enabled << ECC_CFG_ECC_DISABLE | 0 << ECC_SW_RESET | host->cw_data << ECC_NUM_DATA_BYTES | 1 << ECC_FORCE_CLK_OPEN @@ -1904,6 +2372,10 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host) host->clrflashstatus = FS_READY_BSY_N; host->clrreadstatus = 0xc0; + nandc->regs->erased_cw_detect_cfg_clr = + cpu_to_le32(CLR_ERASED_PAGE_DET); + nandc->regs->erased_cw_detect_cfg_set = + cpu_to_le32(SET_ERASED_PAGE_DET); dev_dbg(nandc->dev, "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n", @@ -1948,10 +2420,55 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc) if (!nandc->reg_read_buf) return -ENOMEM; - nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx"); - if (!nandc->chan) { - dev_err(nandc->dev, "failed to request slave channel\n"); - return -ENODEV; + if (nandc->props->is_bam) { + nandc->reg_read_dma = + dma_map_single(nandc->dev, nandc->reg_read_buf, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) { + dev_err(nandc->dev, "failed to DMA MAP reg buffer\n"); + return -EIO; + } + + nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx"); + if (!nandc->tx_chan) { + dev_err(nandc->dev, "failed to request tx channel\n"); + return -ENODEV; + } + + nandc->rx_chan = dma_request_slave_channel(nandc->dev, "rx"); + if (!nandc->rx_chan) { + dev_err(nandc->dev, "failed to request rx channel\n"); + return -ENODEV; + } + + nandc->cmd_chan = dma_request_slave_channel(nandc->dev, "cmd"); + if (!nandc->cmd_chan) { + dev_err(nandc->dev, "failed to request cmd channel\n"); + return -ENODEV; + } + + /* + * Initially allocate BAM transaction to read ONFI param page. + * After detecting all the devices, this BAM transaction will + * be freed and the next BAM tranasction will be allocated with + * maximum codeword size + */ + nandc->max_cwperpage = 1; + nandc->bam_txn = alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + return -ENOMEM; + } + } else { + nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx"); + if (!nandc->chan) { + dev_err(nandc->dev, + "failed to request slave channel\n"); + return -ENODEV; + } } INIT_LIST_HEAD(&nandc->desc_list); @@ -1964,21 +2481,48 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc) static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc) { - dma_release_channel(nandc->chan); + if (nandc->props->is_bam) { + if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma)) + dma_unmap_single(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + + if (nandc->tx_chan) + dma_release_channel(nandc->tx_chan); + + if (nandc->rx_chan) + dma_release_channel(nandc->rx_chan); + + if (nandc->cmd_chan) + dma_release_channel(nandc->cmd_chan); + } else { + if (nandc->chan) + dma_release_channel(nandc->chan); + } } /* one time setup of a few nand controller registers */ static int qcom_nandc_setup(struct qcom_nand_controller *nandc) { + u32 nand_ctrl; + /* kill onenand */ nandc_write(nandc, SFLASHC_BURST_CFG, 0); + nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD), + NAND_DEV_CMD_VLD_VAL); - /* enable ADM DMA */ - nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); + /* enable ADM or BAM DMA */ + if (nandc->props->is_bam) { + nand_ctrl = nandc_read(nandc, NAND_CTRL); + nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN); + } else { + nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); + } /* save the original values of these registers */ - nandc->cmd1 = nandc_read(nandc, NAND_DEV_CMD1); - nandc->vld = nandc_read(nandc, NAND_DEV_CMD_VLD); + nandc->cmd1 = nandc_read(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD1)); + nandc->vld = NAND_DEV_CMD_VLD_VAL; return 0; } @@ -2034,14 +2578,77 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc, return ret; ret = qcom_nand_host_setup(host); - if (ret) - return ret; + + return ret; +} + +static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc, + struct qcom_nand_host *host, + struct device_node *dn) +{ + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; ret = nand_scan_tail(mtd); if (ret) return ret; - return mtd_device_register(mtd, NULL, 0); + ret = mtd_device_register(mtd, NULL, 0); + if (ret) + nand_cleanup(mtd_to_nand(mtd)); + + return ret; +} + +static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc) +{ + struct device *dev = nandc->dev; + struct device_node *dn = dev->of_node, *child; + struct qcom_nand_host *host, *tmp; + int ret; + + for_each_available_child_of_node(dn, child) { + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) { + of_node_put(child); + return -ENOMEM; + } + + ret = qcom_nand_host_init(nandc, host, child); + if (ret) { + devm_kfree(dev, host); + continue; + } + + list_add_tail(&host->node, &nandc->host_list); + } + + if (list_empty(&nandc->host_list)) + return -ENODEV; + + if (nandc->props->is_bam) { + free_bam_transaction(nandc); + nandc->bam_txn = alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + return -ENOMEM; + } + } + + list_for_each_entry_safe(host, tmp, &nandc->host_list, node) { + ret = qcom_nand_mtd_register(nandc, host, child); + if (ret) { + list_del(&host->node); + devm_kfree(dev, host); + } + } + + if (list_empty(&nandc->host_list)) + return -ENODEV; + + return 0; } /* parse custom DT properties here */ @@ -2051,16 +2658,20 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev) struct device_node *np = nandc->dev->of_node; int ret; - ret = of_property_read_u32(np, "qcom,cmd-crci", &nandc->cmd_crci); - if (ret) { - dev_err(nandc->dev, "command CRCI unspecified\n"); - return ret; - } + if (!nandc->props->is_bam) { + ret = of_property_read_u32(np, "qcom,cmd-crci", + &nandc->cmd_crci); + if (ret) { + dev_err(nandc->dev, "command CRCI unspecified\n"); + return ret; + } - ret = of_property_read_u32(np, "qcom,data-crci", &nandc->data_crci); - if (ret) { - dev_err(nandc->dev, "data CRCI unspecified\n"); - return ret; + ret = of_property_read_u32(np, "qcom,data-crci", + &nandc->data_crci); + if (ret) { + dev_err(nandc->dev, "data CRCI unspecified\n"); + return ret; + } } return 0; @@ -2069,10 +2680,8 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev) static int qcom_nandc_probe(struct platform_device *pdev) { struct qcom_nand_controller *nandc; - struct qcom_nand_host *host; const void *dev_data; struct device *dev = &pdev->dev; - struct device_node *dn = dev->of_node, *child; struct resource *res; int ret; @@ -2089,7 +2698,7 @@ static int qcom_nandc_probe(struct platform_device *pdev) return -ENODEV; } - nandc->ecc_modes = (unsigned long)dev_data; + nandc->props = dev_data; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); nandc->base = devm_ioremap_resource(dev, res); @@ -2112,7 +2721,7 @@ static int qcom_nandc_probe(struct platform_device *pdev) ret = qcom_nandc_alloc(nandc); if (ret) - return ret; + goto err_core_clk; ret = clk_prepare_enable(nandc->core_clk); if (ret) @@ -2126,35 +2735,12 @@ static int qcom_nandc_probe(struct platform_device *pdev) if (ret) goto err_setup; - for_each_available_child_of_node(dn, child) { - if (of_device_is_compatible(child, "qcom,nandcs")) { - host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); - if (!host) { - of_node_put(child); - ret = -ENOMEM; - goto err_cs_init; - } - - ret = qcom_nand_host_init(nandc, host, child); - if (ret) { - devm_kfree(dev, host); - continue; - } - - list_add_tail(&host->node, &nandc->host_list); - } - } - - if (list_empty(&nandc->host_list)) { - ret = -ENODEV; - goto err_cs_init; - } + ret = qcom_probe_nand_devices(nandc); + if (ret) + goto err_setup; return 0; -err_cs_init: - list_for_each_entry(host, &nandc->host_list, node) - nand_release(nand_to_mtd(&host->chip)); err_setup: clk_disable_unprepare(nandc->aon_clk); err_aon_clk: @@ -2181,15 +2767,40 @@ static int qcom_nandc_remove(struct platform_device *pdev) return 0; } -#define EBI2_NANDC_ECC_MODES (ECC_RS_4BIT | ECC_BCH_8BIT) +static const struct qcom_nandc_props ipq806x_nandc_props = { + .ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT), + .is_bam = false, + .dev_cmd_reg_start = 0x0, +}; + +static const struct qcom_nandc_props ipq4019_nandc_props = { + .ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT), + .is_bam = true, + .dev_cmd_reg_start = 0x0, +}; + +static const struct qcom_nandc_props ipq8074_nandc_props = { + .ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT), + .is_bam = true, + .dev_cmd_reg_start = 0x7000, +}; /* * data will hold a struct pointer containing more differences once we support * more controller variants */ static const struct of_device_id qcom_nandc_of_match[] = { - { .compatible = "qcom,ipq806x-nand", - .data = (void *)EBI2_NANDC_ECC_MODES, + { + .compatible = "qcom,ipq806x-nand", + .data = &ipq806x_nandc_props, + }, + { + .compatible = "qcom,ipq4019-nand", + .data = &ipq4019_nandc_props, + }, + { + .compatible = "qcom,ipq8074-nand", + .data = &ipq8074_nandc_props, }, {} }; diff --git a/drivers/mtd/nand/r852.h b/drivers/mtd/nand/r852.h index d042ddb71a8b..8713c57f6207 100644 --- a/drivers/mtd/nand/r852.h +++ b/drivers/mtd/nand/r852.h @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 9e0c849607b9..4c383eeec6f6 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -43,7 +43,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 891ac7b99305..e7f3c98487e6 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include @@ -411,7 +411,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, dma_addr = dma_map_single(chan->device->dev, buf, len, dir); - if (dma_addr) + if (!dma_mapping_error(chan->device->dev, dma_addr)) desc = dmaengine_prep_slave_single(chan, dma_addr, len, tr_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -1141,8 +1141,8 @@ static int flctl_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(&pdev->dev, "failed to get flste irq data\n"); - return -ENXIO; + dev_err(&pdev->dev, "failed to get flste irq data: %d\n", irq); + return irq; } ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED, diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index 064ca1757589..f59c455d9f51 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include @@ -183,7 +183,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev) /* Register the partitions */ mtd->name = "sharpsl-nand"; - err = mtd_device_parse_register(mtd, NULL, NULL, + err = mtd_device_parse_register(mtd, data->part_parsers, NULL, data->partitions, data->nr_partitions); if (err) goto err_add; diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index 5939dff253c2..c378705c6e2b 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation. */ #include -#include +#include #include #include #include "sm_common.h" diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index 72369bd079af..575997d0ef8a 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 6abd142b1324..82244be3e766 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include @@ -2212,7 +2212,7 @@ static int sunxi_nfc_probe(struct platform_device *pdev) if (ret) goto out_ahb_clk_unprepare; - nfc->reset = devm_reset_control_get_optional(dev, "ahb"); + nfc->reset = devm_reset_control_get_optional_exclusive(dev, "ahb"); if (IS_ERR(nfc->reset)) { ret = PTR_ERR(nfc->reset); goto out_mod_clk_unprepare; diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c index 9d40b793b1c4..766906f03943 100644 --- a/drivers/mtd/nand/tango_nand.c +++ b/drivers/mtd/nand/tango_nand.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index fc5e773f8b60..84dbf32332e1 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include @@ -440,7 +440,9 @@ static int tmio_probe(struct platform_device *dev) goto err_irq; /* Register the partitions */ - retval = mtd_device_parse_register(mtd, NULL, NULL, + retval = mtd_device_parse_register(mtd, + data ? data->part_parsers : NULL, + NULL, data ? data->partition : NULL, data ? data->num_partitions : 0); if (!retval) diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 0a14fda2e41b..b567d212fe7d 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 744ab10e8962..8037d4b48a05 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -31,10 +31,9 @@ #include #include #include -#include +#include #include #include -#include #include #include @@ -814,12 +813,14 @@ static int vf610_nfc_suspend(struct device *dev) static int vf610_nfc_resume(struct device *dev) { + int err; + struct mtd_info *mtd = dev_get_drvdata(dev); struct vf610_nfc *nfc = mtd_to_nfc(mtd); - pinctrl_pm_select_default_state(dev); - - clk_prepare_enable(nfc->clk); + err = clk_prepare_enable(nfc->clk); + if (err) + return err; vf610_nfc_preinit_controller(nfc); vf610_nfc_init_controller(nfc); diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c index ddee4005248c..9926b4e3d69d 100644 --- a/drivers/mtd/nand/xway_nand.c +++ b/drivers/mtd/nand/xway_nand.c @@ -7,7 +7,7 @@ * Copyright © 2016 Hauke Mehrtens */ -#include +#include #include #include diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index e21161353e76..1f1a61168b3d 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c index a5dfbfbebfca..184c8fbfe465 100644 --- a/drivers/mtd/nftlmount.c +++ b/drivers/mtd/nftlmount.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #define SECTORSIZE 512 diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 2861c7079d7b..6bdf4e525677 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -50,8 +50,8 @@ static int parse_ofpart_partitions(struct mtd_info *master, * when using another parser), so don't be louder than * KERN_DEBUG */ - pr_debug("%s: 'partitions' subnode not found on %s. Trying to parse direct subnodes as partitions.\n", - master->name, mtd_node->full_name); + pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n", + master->name, mtd_node); ofpart_node = mtd_node; dedicated = false; } else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) { @@ -87,9 +87,9 @@ static int parse_ofpart_partitions(struct mtd_info *master, reg = of_get_property(pp, "reg", &len); if (!reg) { if (dedicated) { - pr_debug("%s: ofpart partition %s (%s) missing reg property.\n", - master->name, pp->full_name, - mtd_node->full_name); + pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n", + master->name, pp, + mtd_node); goto ofpart_fail; } else { nr_parts--; @@ -100,9 +100,9 @@ static int parse_ofpart_partitions(struct mtd_info *master, a_cells = of_n_addr_cells(pp); s_cells = of_n_size_cells(pp); if (len / 4 != a_cells + s_cells) { - pr_debug("%s: ofpart partition %s (%s) error parsing reg property.\n", - master->name, pp->full_name, - mtd_node->full_name); + pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n", + master->name, pp, + mtd_node); goto ofpart_fail; } @@ -131,8 +131,8 @@ static int parse_ofpart_partitions(struct mtd_info *master, return nr_parts; ofpart_fail: - pr_err("%s: error parsing ofpart partition %s (%s)\n", - master->name, pp->full_name, mtd_node->full_name); + pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n", + master->name, pp, mtd_node); ret = -EINVAL; ofpart_none: of_node_put(pp); @@ -166,8 +166,7 @@ static int parse_ofoldpart_partitions(struct mtd_info *master, if (!part) return 0; /* No partitions found */ - pr_warn("Device tree uses obsolete partition map binding: %s\n", - dp->full_name); + pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp); nr_parts = plen / sizeof(part[0]); diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 293c8a4d1e49..69c638dd0484 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -89,6 +89,22 @@ config SPI_NXP_SPIFI config SPI_INTEL_SPI tristate +config SPI_INTEL_SPI_PCI + tristate "Intel PCH/PCU SPI flash PCI driver" if EXPERT + depends on X86 && PCI + select SPI_INTEL_SPI + help + This enables PCI support for the Intel PCH/PCU SPI controller in + master mode. This controller is present in modern Intel hardware + and is used to hold BIOS and other persistent settings. Using + this driver it is possible to upgrade BIOS directly from Linux. + + Say N here unless you know what you are doing. Overwriting the + SPI flash may render the system unbootable. + + To compile this driver as a module, choose M here: the module + will be called intel-spi-pci. + config SPI_INTEL_SPI_PLATFORM tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT depends on X86 diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 285aab86c7ca..7d84c5108e17 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -7,5 +7,6 @@ obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o +obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o -obj-$(CONFIG_SPI_STM32_QUADSPI) += stm32-quadspi.o \ No newline at end of file +obj-$(CONFIG_SPI_STM32_QUADSPI) += stm32-quadspi.o diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c index 0106357421bd..8d3cbe27efb6 100644 --- a/drivers/mtd/spi-nor/aspeed-smc.c +++ b/drivers/mtd/spi-nor/aspeed-smc.c @@ -621,19 +621,18 @@ static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type) } /* - * The AST2500 FMC flash controller should be strapped by hardware, or - * autodetected, but the AST2500 SPI flash needs to be set. + * The first chip of the AST2500 FMC flash controller is strapped by + * hardware, or autodetected, but other chips need to be set. Enforce + * the 4B setting for all chips. */ static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip) { struct aspeed_smc_controller *controller = chip->controller; u32 reg; - if (chip->controller->info == &spi_2500_info) { - reg = readl(controller->regs + CE_CONTROL_REG); - reg |= 1 << chip->cs; - writel(reg, controller->regs + CE_CONTROL_REG); - } + reg = readl(controller->regs + CE_CONTROL_REG); + reg |= 1 << chip->cs; + writel(reg, controller->regs + CE_CONTROL_REG); } /* diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c index ba76fa8f2031..6c5708bacad8 100644 --- a/drivers/mtd/spi-nor/atmel-quadspi.c +++ b/drivers/mtd/spi-nor/atmel-quadspi.c @@ -35,7 +35,6 @@ #include #include -#include /* QSPI register offsets */ #define QSPI_CR 0x0000 /* Control Register */ diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c index d1106832b9d5..04f9fb5cd9b6 100644 --- a/drivers/mtd/spi-nor/hisi-sfc.c +++ b/drivers/mtd/spi-nor/hisi-sfc.c @@ -355,16 +355,16 @@ static int hisi_spi_nor_register(struct device_node *np, ret = of_property_read_u32(np, "reg", &priv->chipselect); if (ret) { - dev_err(dev, "There's no reg property for %s\n", - np->full_name); + dev_err(dev, "There's no reg property for %pOF\n", + np); return ret; } ret = of_property_read_u32(np, "spi-max-frequency", &priv->clkrate); if (ret) { - dev_err(dev, "There's no spi-max-frequency property for %s\n", - np->full_name); + dev_err(dev, "There's no spi-max-frequency property for %pOF\n", + np); return ret; } priv->host = host; diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c new file mode 100644 index 000000000000..e82652335ede --- /dev/null +++ b/drivers/mtd/spi-nor/intel-spi-pci.c @@ -0,0 +1,82 @@ +/* + * Intel PCH/PCU SPI flash PCI driver. + * + * Copyright (C) 2016, Intel Corporation + * Author: Mika Westerberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include "intel-spi.h" + +#define BCR 0xdc +#define BCR_WPD BIT(0) + +static const struct intel_spi_boardinfo bxt_info = { + .type = INTEL_SPI_BXT, +}; + +static int intel_spi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct intel_spi_boardinfo *info; + struct intel_spi *ispi; + u32 bcr; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + info = devm_kmemdup(&pdev->dev, (void *)id->driver_data, sizeof(*info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + /* Try to make the chip read/write */ + pci_read_config_dword(pdev, BCR, &bcr); + if (!(bcr & BCR_WPD)) { + bcr |= BCR_WPD; + pci_write_config_dword(pdev, BCR, bcr); + pci_read_config_dword(pdev, BCR, &bcr); + } + info->writeable = !!(bcr & BCR_WPD); + + ispi = intel_spi_probe(&pdev->dev, &pdev->resource[0], info); + if (IS_ERR(ispi)) + return PTR_ERR(ispi); + + pci_set_drvdata(pdev, ispi); + return 0; +} + +static void intel_spi_pci_remove(struct pci_dev *pdev) +{ + intel_spi_remove(pci_get_drvdata(pdev)); +} + +static const struct pci_device_id intel_spi_pci_ids[] = { + { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info }, + { }, +}; +MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids); + +static struct pci_driver intel_spi_pci_driver = { + .name = "intel-spi", + .id_table = intel_spi_pci_ids, + .probe = intel_spi_pci_probe, + .remove = intel_spi_pci_remove, +}; + +module_pci_driver(intel_spi_pci_driver); + +MODULE_DESCRIPTION("Intel PCH/PCU SPI flash PCI driver"); +MODULE_AUTHOR("Mika Westerberg "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c index 8a20ec4991c8..c258c7adf1c5 100644 --- a/drivers/mtd/spi-nor/mtk-quadspi.c +++ b/drivers/mtd/spi-nor/mtk-quadspi.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 1413828ff1fb..cf1d4a15e10a 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -86,6 +87,8 @@ struct flash_info { * to support memory size above 128Mib. */ #define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */ +#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ +#define USE_CLSR BIT(14) /* use CLSR command */ }; #define JEDEC_MFR(info) ((info)->id[0]) @@ -306,8 +309,18 @@ static inline int spi_nor_sr_ready(struct spi_nor *nor) int sr = read_sr(nor); if (sr < 0) return sr; - else - return !(sr & SR_WIP); + + if (nor->flags & SNOR_F_USE_CLSR && sr & (SR_E_ERR | SR_P_ERR)) { + if (sr & SR_E_ERR) + dev_err(nor->dev, "Erase Error occurred\n"); + else + dev_err(nor->dev, "Programming Error occurred\n"); + + nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); + return -EIO; + } + + return !(sr & SR_WIP); } static inline int spi_nor_fsr_ready(struct spi_nor *nor) @@ -1041,15 +1054,15 @@ static const struct flash_info spi_nor_ids[] = { */ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, - { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, + { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, - { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, + { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, + { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, @@ -1079,6 +1092,7 @@ static const struct flash_info spi_nor_ids[] = { { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, + { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, /* ST Microelectronics -- newer production may have feature updates */ { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, @@ -1380,6 +1394,16 @@ write_err: return ret; } +/** + * macronix_quad_enable() - set QE bit in Status Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Status Register. + * + * bit 6 of the Status Register is the QE bit for Macronix like QSPI memories. + * + * Return: 0 on success, -errno otherwise. + */ static int macronix_quad_enable(struct spi_nor *nor) { int ret, val; @@ -1413,22 +1437,13 @@ static int macronix_quad_enable(struct spi_nor *nor) * second byte will be written to the configuration register. * Return negative if error occurred. */ -static int write_sr_cr(struct spi_nor *nor, u16 val) -{ - nor->cmd_buf[0] = val & 0xff; - nor->cmd_buf[1] = (val >> 8); - - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2); -} - -static int spansion_quad_enable(struct spi_nor *nor) +static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr) { int ret; - int quad_en = CR_QUAD_EN_SPAN << 8; write_enable(nor); - ret = write_sr_cr(nor, quad_en); + ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); if (ret < 0) { dev_err(nor->dev, "error while writing configuration register\n"); @@ -1442,6 +1457,41 @@ static int spansion_quad_enable(struct spi_nor *nor) return ret; } + return 0; +} + +/** + * spansion_quad_enable() - set QE bit in Configuraiton Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Configuration Register. + * This function is kept for legacy purpose because it has been used for a + * long time without anybody complaining but it should be considered as + * deprecated and maybe buggy. + * First, this function doesn't care about the previous values of the Status + * and Configuration Registers when it sets the QE bit (bit 1) in the + * Configuration Register: all other bits are cleared, which may have unwanted + * side effects like removing some block protections. + * Secondly, it uses the Read Configuration Register (35h) instruction though + * some very old and few memories don't support this instruction. If a pull-up + * resistor is present on the MISO/IO1 line, we might still be able to pass the + * "read back" test because the QSPI memory doesn't recognize the command, + * so leaves the MISO/IO1 line state unchanged, hence read_cr() returns 0xFF. + * + * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI + * memories. + * + * Return: 0 on success, -errno otherwise. + */ +static int spansion_quad_enable(struct spi_nor *nor) +{ + u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN}; + int ret; + + ret = write_sr_cr(nor, sr_cr); + if (ret) + return ret; + /* read back and check it */ ret = read_cr(nor); if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { @@ -1452,6 +1502,140 @@ static int spansion_quad_enable(struct spi_nor *nor) return 0; } +/** + * spansion_no_read_cr_quad_enable() - set QE bit in Configuration Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Configuration Register. + * This function should be used with QSPI memories not supporting the Read + * Configuration Register (35h) instruction. + * + * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI + * memories. + * + * Return: 0 on success, -errno otherwise. + */ +static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) +{ + u8 sr_cr[2]; + int ret; + + /* Keep the current value of the Status Register. */ + ret = read_sr(nor); + if (ret < 0) { + dev_err(nor->dev, "error while reading status register\n"); + return -EINVAL; + } + sr_cr[0] = ret; + sr_cr[1] = CR_QUAD_EN_SPAN; + + return write_sr_cr(nor, sr_cr); +} + +/** + * spansion_read_cr_quad_enable() - set QE bit in Configuration Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Configuration Register. + * This function should be used with QSPI memories supporting the Read + * Configuration Register (35h) instruction. + * + * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI + * memories. + * + * Return: 0 on success, -errno otherwise. + */ +static int spansion_read_cr_quad_enable(struct spi_nor *nor) +{ + struct device *dev = nor->dev; + u8 sr_cr[2]; + int ret; + + /* Check current Quad Enable bit value. */ + ret = read_cr(nor); + if (ret < 0) { + dev_err(dev, "error while reading configuration register\n"); + return -EINVAL; + } + + if (ret & CR_QUAD_EN_SPAN) + return 0; + + sr_cr[1] = ret | CR_QUAD_EN_SPAN; + + /* Keep the current value of the Status Register. */ + ret = read_sr(nor); + if (ret < 0) { + dev_err(dev, "error while reading status register\n"); + return -EINVAL; + } + sr_cr[0] = ret; + + ret = write_sr_cr(nor, sr_cr); + if (ret) + return ret; + + /* Read back and check it. */ + ret = read_cr(nor); + if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { + dev_err(nor->dev, "Spansion Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +/** + * sr2_bit7_quad_enable() - set QE bit in Status Register 2. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Status Register 2. + * + * This is one of the procedures to set the QE bit described in the SFDP + * (JESD216 rev B) specification but no manufacturer using this procedure has + * been identified yet, hence the name of the function. + * + * Return: 0 on success, -errno otherwise. + */ +static int sr2_bit7_quad_enable(struct spi_nor *nor) +{ + u8 sr2; + int ret; + + /* Check current Quad Enable bit value. */ + ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); + if (ret) + return ret; + if (sr2 & SR2_QUAD_EN_BIT7) + return 0; + + /* Update the Quad Enable bit. */ + sr2 |= SR2_QUAD_EN_BIT7; + + write_enable(nor); + + ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1); + if (ret < 0) { + dev_err(nor->dev, "error while writing status register 2\n"); + return -EINVAL; + } + + ret = spi_nor_wait_till_ready(nor); + if (ret < 0) { + dev_err(nor->dev, "timeout while writing status register 2\n"); + return ret; + } + + /* Read back and check it. */ + ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); + if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) { + dev_err(nor->dev, "SR2 Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + static int spi_nor_check(struct spi_nor *nor) { if (!nor->dev || !nor->read || !nor->write || @@ -1591,6 +1775,560 @@ spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, pp->proto = proto; } +/* + * Serial Flash Discoverable Parameters (SFDP) parsing. + */ + +/** + * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters. + * @nor: pointer to a 'struct spi_nor' + * @addr: offset in the SFDP area to start reading data from + * @len: number of bytes to read + * @buf: buffer where the SFDP data are copied into + * + * Whatever the actual numbers of bytes for address and dummy cycles are + * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always + * followed by a 3-byte address and 8 dummy clock cycles. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr, + size_t len, void *buf) +{ + u8 addr_width, read_opcode, read_dummy; + int ret; + + read_opcode = nor->read_opcode; + addr_width = nor->addr_width; + read_dummy = nor->read_dummy; + + nor->read_opcode = SPINOR_OP_RDSFDP; + nor->addr_width = 3; + nor->read_dummy = 8; + + while (len) { + ret = nor->read(nor, addr, len, (u8 *)buf); + if (!ret || ret > len) { + ret = -EIO; + goto read_err; + } + if (ret < 0) + goto read_err; + + buf += ret; + addr += ret; + len -= ret; + } + ret = 0; + +read_err: + nor->read_opcode = read_opcode; + nor->addr_width = addr_width; + nor->read_dummy = read_dummy; + + return ret; +} + +struct sfdp_parameter_header { + u8 id_lsb; + u8 minor; + u8 major; + u8 length; /* in double words */ + u8 parameter_table_pointer[3]; /* byte address */ + u8 id_msb; +}; + +#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb) +#define SFDP_PARAM_HEADER_PTP(p) \ + (((p)->parameter_table_pointer[2] << 16) | \ + ((p)->parameter_table_pointer[1] << 8) | \ + ((p)->parameter_table_pointer[0] << 0)) + +#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */ +#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */ + +#define SFDP_SIGNATURE 0x50444653U +#define SFDP_JESD216_MAJOR 1 +#define SFDP_JESD216_MINOR 0 +#define SFDP_JESD216A_MINOR 5 +#define SFDP_JESD216B_MINOR 6 + +struct sfdp_header { + u32 signature; /* Ox50444653U <=> "SFDP" */ + u8 minor; + u8 major; + u8 nph; /* 0-base number of parameter headers */ + u8 unused; + + /* Basic Flash Parameter Table. */ + struct sfdp_parameter_header bfpt_header; +}; + +/* Basic Flash Parameter Table */ + +/* + * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs. + * They are indexed from 1 but C arrays are indexed from 0. + */ +#define BFPT_DWORD(i) ((i) - 1) +#define BFPT_DWORD_MAX 16 + +/* The first version of JESB216 defined only 9 DWORDs. */ +#define BFPT_DWORD_MAX_JESD216 9 + +/* 1st DWORD. */ +#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16) +#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17) +#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17) +#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17) +#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17) +#define BFPT_DWORD1_DTR BIT(19) +#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20) +#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21) +#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22) + +/* 5th DWORD. */ +#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0) +#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4) + +/* 11th DWORD. */ +#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4 +#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4) + +/* 15th DWORD. */ + +/* + * (from JESD216 rev B) + * Quad Enable Requirements (QER): + * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4 + * reads based on instruction. DQ3/HOLD# functions are hold during + * instruction phase. + * - 001b: QE is bit 1 of status register 2. It is set via Write Status with + * two data bytes where bit 1 of the second byte is one. + * [...] + * Writing only one byte to the status register has the side-effect of + * clearing status register 2, including the QE bit. The 100b code is + * used if writing one byte to the status register does not modify + * status register 2. + * - 010b: QE is bit 6 of status register 1. It is set via Write Status with + * one data byte where bit 6 is one. + * [...] + * - 011b: QE is bit 7 of status register 2. It is set via Write status + * register 2 instruction 3Eh with one data byte where bit 7 is one. + * [...] + * The status register 2 is read using instruction 3Fh. + * - 100b: QE is bit 1 of status register 2. It is set via Write Status with + * two data bytes where bit 1 of the second byte is one. + * [...] + * In contrast to the 001b code, writing one byte to the status + * register does not modify status register 2. + * - 101b: QE is bit 1 of status register 2. Status register 1 is read using + * Read Status instruction 05h. Status register2 is read using + * instruction 35h. QE is set via Writ Status instruction 01h with + * two data bytes where bit 1 of the second byte is one. + * [...] + */ +#define BFPT_DWORD15_QER_MASK GENMASK(22, 20) +#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */ +#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20) +#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */ +#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20) +#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20) +#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */ + +struct sfdp_bfpt { + u32 dwords[BFPT_DWORD_MAX]; +}; + +/* Fast Read settings. */ + +static inline void +spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read, + u16 half, + enum spi_nor_protocol proto) +{ + read->num_mode_clocks = (half >> 5) & 0x07; + read->num_wait_states = (half >> 0) & 0x1f; + read->opcode = (half >> 8) & 0xff; + read->proto = proto; +} + +struct sfdp_bfpt_read { + /* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */ + u32 hwcaps; + + /* + * The bit in BFPT DWORD tells us + * whether the Fast Read x-y-z command is supported. + */ + u32 supported_dword; + u32 supported_bit; + + /* + * The half-word at offset in BFPT DWORD + * encodes the op code, the number of mode clocks and the number of wait + * states to be used by Fast Read x-y-z command. + */ + u32 settings_dword; + u32 settings_shift; + + /* The SPI protocol for this Fast Read x-y-z command. */ + enum spi_nor_protocol proto; +}; + +static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = { + /* Fast Read 1-1-2 */ + { + SNOR_HWCAPS_READ_1_1_2, + BFPT_DWORD(1), BIT(16), /* Supported bit */ + BFPT_DWORD(4), 0, /* Settings */ + SNOR_PROTO_1_1_2, + }, + + /* Fast Read 1-2-2 */ + { + SNOR_HWCAPS_READ_1_2_2, + BFPT_DWORD(1), BIT(20), /* Supported bit */ + BFPT_DWORD(4), 16, /* Settings */ + SNOR_PROTO_1_2_2, + }, + + /* Fast Read 2-2-2 */ + { + SNOR_HWCAPS_READ_2_2_2, + BFPT_DWORD(5), BIT(0), /* Supported bit */ + BFPT_DWORD(6), 16, /* Settings */ + SNOR_PROTO_2_2_2, + }, + + /* Fast Read 1-1-4 */ + { + SNOR_HWCAPS_READ_1_1_4, + BFPT_DWORD(1), BIT(22), /* Supported bit */ + BFPT_DWORD(3), 16, /* Settings */ + SNOR_PROTO_1_1_4, + }, + + /* Fast Read 1-4-4 */ + { + SNOR_HWCAPS_READ_1_4_4, + BFPT_DWORD(1), BIT(21), /* Supported bit */ + BFPT_DWORD(3), 0, /* Settings */ + SNOR_PROTO_1_4_4, + }, + + /* Fast Read 4-4-4 */ + { + SNOR_HWCAPS_READ_4_4_4, + BFPT_DWORD(5), BIT(4), /* Supported bit */ + BFPT_DWORD(7), 16, /* Settings */ + SNOR_PROTO_4_4_4, + }, +}; + +struct sfdp_bfpt_erase { + /* + * The half-word at offset in DWORD encodes the + * op code and erase sector size to be used by Sector Erase commands. + */ + u32 dword; + u32 shift; +}; + +static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = { + /* Erase Type 1 in DWORD8 bits[15:0] */ + {BFPT_DWORD(8), 0}, + + /* Erase Type 2 in DWORD8 bits[31:16] */ + {BFPT_DWORD(8), 16}, + + /* Erase Type 3 in DWORD9 bits[15:0] */ + {BFPT_DWORD(9), 0}, + + /* Erase Type 4 in DWORD9 bits[31:16] */ + {BFPT_DWORD(9), 16}, +}; + +static int spi_nor_hwcaps_read2cmd(u32 hwcaps); + +/** + * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table. + * @nor: pointer to a 'struct spi_nor' + * @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing + * the Basic Flash Parameter Table length and version + * @params: pointer to the 'struct spi_nor_flash_parameter' to be + * filled + * + * The Basic Flash Parameter Table is the main and only mandatory table as + * defined by the SFDP (JESD216) specification. + * It provides us with the total size (memory density) of the data array and + * the number of address bytes for Fast Read, Page Program and Sector Erase + * commands. + * For Fast READ commands, it also gives the number of mode clock cycles and + * wait states (regrouped in the number of dummy clock cycles) for each + * supported instruction op code. + * For Page Program, the page size is now available since JESD216 rev A, however + * the supported instruction op codes are still not provided. + * For Sector Erase commands, this table stores the supported instruction op + * codes and the associated sector sizes. + * Finally, the Quad Enable Requirements (QER) are also available since JESD216 + * rev A. The QER bits encode the manufacturer dependent procedure to be + * executed to set the Quad Enable (QE) bit in some internal register of the + * Quad SPI memory. Indeed the QE bit, when it exists, must be set before + * sending any Quad SPI command to the memory. Actually, setting the QE bit + * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2 + * and IO3 hence enabling 4 (Quad) I/O lines. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_parse_bfpt(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + struct spi_nor_flash_parameter *params) +{ + struct mtd_info *mtd = &nor->mtd; + struct sfdp_bfpt bfpt; + size_t len; + int i, cmd, err; + u32 addr; + u16 half; + + /* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */ + if (bfpt_header->length < BFPT_DWORD_MAX_JESD216) + return -EINVAL; + + /* Read the Basic Flash Parameter Table. */ + len = min_t(size_t, sizeof(bfpt), + bfpt_header->length * sizeof(u32)); + addr = SFDP_PARAM_HEADER_PTP(bfpt_header); + memset(&bfpt, 0, sizeof(bfpt)); + err = spi_nor_read_sfdp(nor, addr, len, &bfpt); + if (err < 0) + return err; + + /* Fix endianness of the BFPT DWORDs. */ + for (i = 0; i < BFPT_DWORD_MAX; i++) + bfpt.dwords[i] = le32_to_cpu(bfpt.dwords[i]); + + /* Number of address bytes. */ + switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) { + case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY: + nor->addr_width = 3; + break; + + case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY: + nor->addr_width = 4; + break; + + default: + break; + } + + /* Flash Memory Density (in bits). */ + params->size = bfpt.dwords[BFPT_DWORD(2)]; + if (params->size & BIT(31)) { + params->size &= ~BIT(31); + params->size = 1ULL << params->size; + } else { + params->size++; + } + params->size >>= 3; /* Convert to bytes. */ + + /* Fast Read settings. */ + for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) { + const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i]; + struct spi_nor_read_command *read; + + if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) { + params->hwcaps.mask &= ~rd->hwcaps; + continue; + } + + params->hwcaps.mask |= rd->hwcaps; + cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps); + read = ¶ms->reads[cmd]; + half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift; + spi_nor_set_read_settings_from_bfpt(read, half, rd->proto); + } + + /* Sector Erase settings. */ + for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) { + const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i]; + u32 erasesize; + u8 opcode; + + half = bfpt.dwords[er->dword] >> er->shift; + erasesize = half & 0xff; + + /* erasesize == 0 means this Erase Type is not supported. */ + if (!erasesize) + continue; + + erasesize = 1U << erasesize; + opcode = (half >> 8) & 0xff; +#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS + if (erasesize == SZ_4K) { + nor->erase_opcode = opcode; + mtd->erasesize = erasesize; + break; + } +#endif + if (!mtd->erasesize || mtd->erasesize < erasesize) { + nor->erase_opcode = opcode; + mtd->erasesize = erasesize; + } + } + + /* Stop here if not JESD216 rev A or later. */ + if (bfpt_header->length < BFPT_DWORD_MAX) + return 0; + + /* Page size: this field specifies 'N' so the page size = 2^N bytes. */ + params->page_size = bfpt.dwords[BFPT_DWORD(11)]; + params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK; + params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT; + params->page_size = 1U << params->page_size; + + /* Quad Enable Requirements. */ + switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) { + case BFPT_DWORD15_QER_NONE: + params->quad_enable = NULL; + break; + + case BFPT_DWORD15_QER_SR2_BIT1_BUGGY: + case BFPT_DWORD15_QER_SR2_BIT1_NO_RD: + params->quad_enable = spansion_no_read_cr_quad_enable; + break; + + case BFPT_DWORD15_QER_SR1_BIT6: + params->quad_enable = macronix_quad_enable; + break; + + case BFPT_DWORD15_QER_SR2_BIT7: + params->quad_enable = sr2_bit7_quad_enable; + break; + + case BFPT_DWORD15_QER_SR2_BIT1: + params->quad_enable = spansion_read_cr_quad_enable; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/** + * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters. + * @nor: pointer to a 'struct spi_nor' + * @params: pointer to the 'struct spi_nor_flash_parameter' to be + * filled + * + * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216 + * specification. This is a standard which tends to supported by almost all + * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at + * runtime the main parameters needed to perform basic SPI flash operations such + * as Fast Read, Page Program or Sector Erase commands. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_parse_sfdp(struct spi_nor *nor, + struct spi_nor_flash_parameter *params) +{ + const struct sfdp_parameter_header *param_header, *bfpt_header; + struct sfdp_parameter_header *param_headers = NULL; + struct sfdp_header header; + struct device *dev = nor->dev; + size_t psize; + int i, err; + + /* Get the SFDP header. */ + err = spi_nor_read_sfdp(nor, 0, sizeof(header), &header); + if (err < 0) + return err; + + /* Check the SFDP header version. */ + if (le32_to_cpu(header.signature) != SFDP_SIGNATURE || + header.major != SFDP_JESD216_MAJOR || + header.minor < SFDP_JESD216_MINOR) + return -EINVAL; + + /* + * Verify that the first and only mandatory parameter header is a + * Basic Flash Parameter Table header as specified in JESD216. + */ + bfpt_header = &header.bfpt_header; + if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID || + bfpt_header->major != SFDP_JESD216_MAJOR) + return -EINVAL; + + /* + * Allocate memory then read all parameter headers with a single + * Read SFDP command. These parameter headers will actually be parsed + * twice: a first time to get the latest revision of the basic flash + * parameter table, then a second time to handle the supported optional + * tables. + * Hence we read the parameter headers once for all to reduce the + * processing time. Also we use kmalloc() instead of devm_kmalloc() + * because we don't need to keep these parameter headers: the allocated + * memory is always released with kfree() before exiting this function. + */ + if (header.nph) { + psize = header.nph * sizeof(*param_headers); + + param_headers = kmalloc(psize, GFP_KERNEL); + if (!param_headers) + return -ENOMEM; + + err = spi_nor_read_sfdp(nor, sizeof(header), + psize, param_headers); + if (err < 0) { + dev_err(dev, "failed to read SFDP parameter headers\n"); + goto exit; + } + } + + /* + * Check other parameter headers to get the latest revision of + * the basic flash parameter table. + */ + for (i = 0; i < header.nph; i++) { + param_header = ¶m_headers[i]; + + if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID && + param_header->major == SFDP_JESD216_MAJOR && + (param_header->minor > bfpt_header->minor || + (param_header->minor == bfpt_header->minor && + param_header->length > bfpt_header->length))) + bfpt_header = param_header; + } + + err = spi_nor_parse_bfpt(nor, bfpt_header, params); + if (err) + goto exit; + + /* Parse other parameter headers. */ + for (i = 0; i < header.nph; i++) { + param_header = ¶m_headers[i]; + + switch (SFDP_PARAM_HEADER_ID(param_header)) { + case SFDP_SECTOR_MAP_ID: + dev_info(dev, "non-uniform erase sector maps are not supported yet.\n"); + break; + + default: + break; + } + + if (err) + goto exit; + } + +exit: + kfree(param_headers); + return err; +} + static int spi_nor_init_params(struct spi_nor *nor, const struct flash_info *info, struct spi_nor_flash_parameter *params) @@ -1646,11 +2384,28 @@ static int spi_nor_init_params(struct spi_nor *nor, break; default: + /* Kept only for backward compatibility purpose. */ params->quad_enable = spansion_quad_enable; break; } } + /* Override the parameters with data read from SFDP tables. */ + nor->addr_width = 0; + nor->mtd.erasesize = 0; + if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) && + !(info->flags & SPI_NOR_SKIP_SFDP)) { + struct spi_nor_flash_parameter sfdp_params; + + memcpy(&sfdp_params, params, sizeof(sfdp_params)); + if (spi_nor_parse_sfdp(nor, &sfdp_params)) { + nor->addr_width = 0; + nor->mtd.erasesize = 0; + } else { + memcpy(params, &sfdp_params, sizeof(*params)); + } + } + return 0; } @@ -1762,6 +2517,10 @@ static int spi_nor_select_erase(struct spi_nor *nor, { struct mtd_info *mtd = &nor->mtd; + /* Do nothing if already configured from SFDP. */ + if (mtd->erasesize) + return 0; + #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { @@ -1960,6 +2719,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, nor->flags |= SNOR_F_HAS_SR_TB; if (info->flags & NO_CHIP_ERASE) nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; + if (info->flags & USE_CLSR) + nor->flags |= SNOR_F_USE_CLSR; if (info->flags & SPI_NOR_NO_ERASE) mtd->flags |= MTD_NO_ERASE; @@ -1994,9 +2755,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, if (ret) return ret; - if (info->addr_width) + if (nor->addr_width) { + /* already configured from SFDP */ + } else if (info->addr_width) { nor->addr_width = info->addr_width; - else if (mtd->size > 0x1000000) { + } else if (mtd->size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ nor->addr_width = 4; if (JEDEC_MFR(info) == SNOR_MFR_SPANSION || diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c index 41b13d1cdcc4..95f0bf95f095 100644 --- a/drivers/mtd/ssfdc.c +++ b/drivers/mtd/ssfdc.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include struct ssfdcr_record { diff --git a/drivers/mtd/tests/nandbiterrs.c b/drivers/mtd/tests/nandbiterrs.c index f26dec896afa..5f03b8c885a9 100644 --- a/drivers/mtd/tests/nandbiterrs.c +++ b/drivers/mtd/tests/nandbiterrs.c @@ -47,7 +47,7 @@ #include #include #include -#include +#include #include #include "mtd_test.h" diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c index a4e3ae8f0c85..13eaf16ecd16 100644 --- a/drivers/staging/mt29f_spinand/mt29f_spinand.c +++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include "mt29f_spinand.h" diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index b25d28a21212..48d9522e209c 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 9fdb54a95976..8acfc1e099e1 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -216,6 +216,7 @@ * .data section */ #define DATA_DATA \ + *(.xiptext) \ *(DATA_MAIN) \ *(.ref.data) \ *(.data..shared_aligned) /* percpu related */ \ diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index b572955e6de6..15646740e2a8 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -144,6 +144,7 @@ struct tmio_nand_data { struct nand_bbt_descr *badblock_pattern; struct mtd_partition *partition; unsigned int num_partitions; + const char *const *part_parsers; }; #define FBIO_TMIO_ACC_WRITE 0x7C639300 diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index f8a2ef239c60..6cd0f6b7658b 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -206,6 +206,15 @@ struct mtd_pairing_scheme { struct module; /* only needed for owner field in mtd_info */ +/** + * struct mtd_debug_info - debugging information for an MTD device. + * + * @dfs_dir: direntry object of the MTD device debugfs directory + */ +struct mtd_debug_info { + struct dentry *dfs_dir; +}; + struct mtd_info { u_char type; uint32_t flags; @@ -346,6 +355,7 @@ struct mtd_info { struct module *owner; struct device dev; int usecount; + struct mtd_debug_info dbg; }; int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, diff --git a/include/linux/mtd/nand-gpio.h b/include/linux/mtd/nand-gpio.h index 51534e50f7fc..be4f45d89be2 100644 --- a/include/linux/mtd/nand-gpio.h +++ b/include/linux/mtd/nand-gpio.h @@ -1,7 +1,7 @@ #ifndef __LINUX_MTD_NAND_GPIO_H #define __LINUX_MTD_NAND_GPIO_H -#include +#include struct gpio_nand_platdata { int gpio_nce; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/rawnand.h similarity index 98% rename from include/linux/mtd/nand.h rename to include/linux/mtd/rawnand.h index 5216d2eb2289..2b05f4273bab 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/rawnand.h @@ -1,6 +1,4 @@ /* - * linux/include/linux/mtd/nand.h - * * Copyright © 2000-2010 David Woodhouse * Steven J. Hill * Thomas Gleixner @@ -15,8 +13,8 @@ * Changelog: * See git changelog. */ -#ifndef __LINUX_MTD_NAND_H -#define __LINUX_MTD_NAND_H +#ifndef __LINUX_MTD_RAWNAND_H +#define __LINUX_MTD_RAWNAND_H #include #include @@ -44,12 +42,6 @@ void nand_release(struct mtd_info *mtd); /* Internal helper for board drivers which need to override command function */ void nand_wait_ready(struct mtd_info *mtd); -/* locks all blocks present in the device */ -int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); - -/* unlocks specified locked blocks */ -int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); - /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 @@ -89,10 +81,6 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); #define NAND_CMD_SET_FEATURES 0xef #define NAND_CMD_RESET 0xff -#define NAND_CMD_LOCK 0x2a -#define NAND_CMD_UNLOCK1 0x23 -#define NAND_CMD_UNLOCK2 0x24 - /* Extended commands for large page devices */ #define NAND_CMD_READSTART 0x30 #define NAND_CMD_RNDOUTSTART 0xE0 @@ -449,14 +437,16 @@ struct nand_jedec_params { __le16 crc; } __packed; +/* The maximum expected count of bytes in the NAND ID sequence */ +#define NAND_MAX_ID_LEN 8 + /** * struct nand_id - NAND id structure - * @data: buffer containing the id bytes. Currently 8 bytes large, but can - * be extended if required. + * @data: buffer containing the id bytes. * @len: ID length. */ struct nand_id { - u8 data[8]; + u8 data[NAND_MAX_ID_LEN]; int len; }; @@ -1028,8 +1018,6 @@ static inline void *nand_get_manufacturer_data(struct nand_chip *chip) #define NAND_MFR_ATO 0x9b #define NAND_MFR_WINBOND 0xef -/* The maximum expected count of bytes in the NAND ID sequence */ -#define NAND_MAX_ID_LEN 8 /* * A helper for defining older NAND chips where the second ID byte fully @@ -1246,6 +1234,8 @@ int onfi_init_data_interface(struct nand_chip *chip, */ static inline bool nand_is_slc(struct nand_chip *chip) { + WARN(chip->bits_per_cell == 0, + "chip->bits_per_cell is used uninitialized\n"); return chip->bits_per_cell == 1; } @@ -1328,4 +1318,4 @@ void nand_cleanup(struct nand_chip *chip); /* Default extended ID decoding function */ void nand_decode_ext_id(struct nand_chip *chip); -#endif /* __LINUX_MTD_NAND_H */ +#endif /* __LINUX_MTD_RAWNAND_H */ diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 2251add65fa7..c759d403cbc0 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -22,7 +22,7 @@ #include #include -#include +#include #include #include diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h index 65e91d0fa981..e1845fc4afbd 100644 --- a/include/linux/mtd/sharpsl.h +++ b/include/linux/mtd/sharpsl.h @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include +#include #include #include @@ -17,4 +17,5 @@ struct sharpsl_nand_platform_data { const struct mtd_ooblayout_ops *ecc_layout; struct mtd_partition *partitions; unsigned int nr_partitions; + const char *const *part_parsers; }; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 55faa2f07cca..1f0a7fc7772f 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -41,6 +41,8 @@ #define SPINOR_OP_WREN 0x06 /* Write enable */ #define SPINOR_OP_RDSR 0x05 /* Read status register */ #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ +#define SPINOR_OP_RDSR2 0x3f /* Read status register 2 */ +#define SPINOR_OP_WRSR2 0x3e /* Write status register 2 */ #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */ @@ -56,6 +58,7 @@ #define SPINOR_OP_CHIP_ERASE 0xc7 /* Erase whole flash chip */ #define SPINOR_OP_SE 0xd8 /* Sector erase (usually 64KiB) */ #define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */ +#define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */ #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ @@ -102,6 +105,7 @@ /* Used for Spansion flashes only. */ #define SPINOR_OP_BRWR 0x17 /* Bank register write */ +#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ /* Used for Micron flashes only. */ #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ @@ -116,6 +120,9 @@ #define SR_BP2 BIT(4) /* Block protect 2 */ #define SR_TB BIT(5) /* Top/Bottom protect */ #define SR_SRWD BIT(7) /* SR write protect */ +/* Spansion/Cypress specific status bits */ +#define SR_E_ERR BIT(5) +#define SR_P_ERR BIT(6) #define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */ @@ -128,6 +135,9 @@ /* Configuration Register bits. */ #define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */ +/* Status Register 2 bits. */ +#define SR2_QUAD_EN_BIT7 BIT(7) + /* Supported SPI protocols */ #define SNOR_PROTO_INST_MASK GENMASK(23, 16) #define SNOR_PROTO_INST_SHIFT 16 @@ -218,6 +228,7 @@ enum spi_nor_option_flags { SNOR_F_NO_OP_CHIP_ERASE = BIT(2), SNOR_F_S3AN_ADDR_DEFAULT = BIT(3), SNOR_F_READY_XSR_RDY = BIT(4), + SNOR_F_USE_CLSR = BIT(5), }; /** diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h index abed4dec5c2f..e373690cce0a 100644 --- a/include/linux/mtd/xip.h +++ b/include/linux/mtd/xip.h @@ -30,7 +30,9 @@ * obviously not be running from flash. The __xipram is therefore marking * those functions so they get relocated to ram. */ -#define __xipram noinline __attribute__ ((__section__ (".data"))) +#ifdef CONFIG_XIP_KERNEL +#define __xipram noinline __attribute__ ((__section__ (".xiptext"))) +#endif /* * Each architecture has to provide the following macros. They must access @@ -90,10 +92,10 @@ #define xip_cpu_idle() do { } while (0) #endif -#else - -#define __xipram - #endif /* CONFIG_MTD_XIP */ +#ifndef __xipram +#define __xipram +#endif + #endif /* __LINUX_MTD_XIP_H__ */ diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h index 1cf555aef896..f1a2cf655bdb 100644 --- a/include/linux/platform_data/mtd-davinci.h +++ b/include/linux/platform_data/mtd-davinci.h @@ -28,7 +28,7 @@ #ifndef __ARCH_ARM_DAVINCI_NAND_H #define __ARCH_ARM_DAVINCI_NAND_H -#include +#include #define NANDFCR_OFFSET 0x60 #define NANDFSR_OFFSET 0x64 diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h index f01659026b26..f8c553f92655 100644 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -12,7 +12,7 @@ #ifndef __MTD_NAND_S3C2410_H #define __MTD_NAND_S3C2410_H -#include +#include /** * struct s3c2410_nand_set - define a set of one or more nand chips