net/stmmac: Use clk_prepare_enable and clk_disable_unprepare

This patch fixes an issue introduced by commit ID 6a81c26f
[net/stmmac: remove conditional compilation of clk code], which
switched from the internal stmmac_clk_{en}{dis}able calls to
clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare
was removed.

clk_{un}prepare is mandatory for platforms using common clock framework.
Since these drivers are used by SPEAr platform, which supports common
clock framework, add clk_{un}prepare() support for them. Otherwise
the clocks are not correctly en-/disabled and ethernet support doesn't
work.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Stefan Roese 2012-09-21 01:06:29 +00:00 committed by David S. Miller
parent bf5b30b8a4
commit a630844d89
2 changed files with 8 additions and 8 deletions

View File

@ -1066,7 +1066,7 @@ static int stmmac_open(struct net_device *dev)
} else
priv->tm->enable = 1;
#endif
clk_enable(priv->stmmac_clk);
clk_prepare_enable(priv->stmmac_clk);
stmmac_check_ether_addr(priv);
@ -1188,7 +1188,7 @@ open_error:
if (priv->phydev)
phy_disconnect(priv->phydev);
clk_disable(priv->stmmac_clk);
clk_disable_unprepare(priv->stmmac_clk);
return ret;
}
@ -1246,7 +1246,7 @@ static int stmmac_release(struct net_device *dev)
#ifdef CONFIG_STMMAC_DEBUG_FS
stmmac_exit_fs();
#endif
clk_disable(priv->stmmac_clk);
clk_disable_unprepare(priv->stmmac_clk);
return 0;
}
@ -2178,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev)
else {
stmmac_set_mac(priv->ioaddr, false);
/* Disable clock in case of PWM is off */
clk_disable(priv->stmmac_clk);
clk_disable_unprepare(priv->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
@ -2203,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev)
priv->hw->mac->pmt(priv->ioaddr, 0);
else
/* enable the clk prevously disabled */
clk_enable(priv->stmmac_clk);
clk_prepare_enable(priv->stmmac_clk);
netif_device_attach(ndev);

View File

@ -97,12 +97,12 @@ static struct clk *timer_clock;
static void stmmac_tmu_start(unsigned int new_freq)
{
clk_set_rate(timer_clock, new_freq);
clk_enable(timer_clock);
clk_prepare_enable(timer_clock);
}
static void stmmac_tmu_stop(void)
{
clk_disable(timer_clock);
clk_disable_unprepare(timer_clock);
}
int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
@ -126,7 +126,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
int stmmac_close_ext_timer(void)
{
clk_disable(timer_clock);
clk_disable_unprepare(timer_clock);
tmu2_unregister_user();
clk_put(timer_clock);
return 0;