Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md

Pull md updates from Shaohua Li:
 "Mainly fixes bugs and improves performance:

   - Improve scalability for raid1 from Coly

   - Improve raid5-cache read performance, disk efficiency and IO
     pattern from Song and me

   - Fix a race condition of disk hotplug for linear from Coly

   - A few cleanup patches from Ming and Byungchul

   - Fix a memory leak from Neil

   - Fix WRITE SAME IO failure from me

   - Add doc for raid5-cache from me"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (23 commits)
  md/raid1: fix write behind issues introduced by bio_clone_bioset_partial
  md/raid1: handle flush request correctly
  md/linear: shutup lockdep warnning
  md/raid1: fix a use-after-free bug
  RAID1: avoid unnecessary spin locks in I/O barrier code
  RAID1: a new I/O barrier implementation to remove resync window
  md/raid5: Don't reinvent the wheel but use existing llist API
  md: fast clone bio in bio_clone_mddev()
  md: remove unnecessary check on mddev
  md/raid1: use bio_clone_bioset_partial() in case of write behind
  md: fail if mddev->bio_set can't be created
  block: introduce bio_clone_bioset_partial()
  md: disable WRITE SAME if it fails in underlayer disks
  md/raid5-cache: exclude reclaiming stripes in reclaim check
  md/raid5-cache: stripe reclaim only counts valid stripes
  MD: add doc for raid5-cache
  Documentation: move MD related doc into a separate dir
  md: ensure md devices are freed before module is unloaded.
  md/r5cache: improve journal device efficiency
  md/r5cache: enable chunk_aligned_read with write back cache
  ...
This commit is contained in:
Linus Torvalds 2017-02-24 14:42:19 -08:00
commit a682e00354
20 changed files with 941 additions and 351 deletions

View File

@ -270,8 +270,8 @@ m68k/
- directory with info about Linux on Motorola 68k architecture.
mailbox.txt
- How to write drivers for the common mailbox framework (IPC).
md-cluster.txt
- info on shared-device RAID MD cluster.
md/
- directory with info about Linux Software RAID
media/
- info on media drivers: uAPI, kAPI and driver documentation.
memory-barriers.txt

View File

@ -725,3 +725,8 @@ These currently include:
to 1. Setting this to 0 disables bypass accounting and
requires preread stripes to wait until all full-width stripe-
writes are complete. Valid values are 0 to stripe_cache_size.
journal_mode (currently raid5 only)
The cache mode for raid5. raid5 could include an extra disk for
caching. The mode can be "write-throuth" and "write-back". The
default is "write-through".

View File

@ -0,0 +1,109 @@
RAID5 cache
Raid 4/5/6 could include an extra disk for data cache besides normal RAID
disks. The role of RAID disks isn't changed with the cache disk. The cache disk
caches data to the RAID disks. The cache can be in write-through (supported
since 4.4) or write-back mode (supported since 4.10). mdadm (supported since
3.4) has a new option '--write-journal' to create array with cache. Please
refer to mdadm manual for details. By default (RAID array starts), the cache is
in write-through mode. A user can switch it to write-back mode by:
echo "write-back" > /sys/block/md0/md/journal_mode
And switch it back to write-through mode by:
echo "write-through" > /sys/block/md0/md/journal_mode
In both modes, all writes to the array will hit cache disk first. This means
the cache disk must be fast and sustainable.
-------------------------------------
write-through mode:
This mode mainly fixes the 'write hole' issue. For RAID 4/5/6 array, an unclean
shutdown can cause data in some stripes to not be in consistent state, eg, data
and parity don't match. The reason is that a stripe write involves several RAID
disks and it's possible the writes don't hit all RAID disks yet before the
unclean shutdown. We call an array degraded if it has inconsistent data. MD
tries to resync the array to bring it back to normal state. But before the
resync completes, any system crash will expose the chance of real data
corruption in the RAID array. This problem is called 'write hole'.
The write-through cache will cache all data on cache disk first. After the data
is safe on the cache disk, the data will be flushed onto RAID disks. The
two-step write will guarantee MD can recover correct data after unclean
shutdown even the array is degraded. Thus the cache can close the 'write hole'.
In write-through mode, MD reports IO completion to upper layer (usually
filesystems) after the data is safe on RAID disks, so cache disk failure
doesn't cause data loss. Of course cache disk failure means the array is
exposed to 'write hole' again.
In write-through mode, the cache disk isn't required to be big. Several
hundreds megabytes are enough.
--------------------------------------
write-back mode:
write-back mode fixes the 'write hole' issue too, since all write data is
cached on cache disk. But the main goal of 'write-back' cache is to speed up
write. If a write crosses all RAID disks of a stripe, we call it full-stripe
write. For non-full-stripe writes, MD must read old data before the new parity
can be calculated. These synchronous reads hurt write throughput. Some writes
which are sequential but not dispatched in the same time will suffer from this
overhead too. Write-back cache will aggregate the data and flush the data to
RAID disks only after the data becomes a full stripe write. This will
completely avoid the overhead, so it's very helpful for some workloads. A
typical workload which does sequential write followed by fsync is an example.
In write-back mode, MD reports IO completion to upper layer (usually
filesystems) right after the data hits cache disk. The data is flushed to raid
disks later after specific conditions met. So cache disk failure will cause
data loss.
In write-back mode, MD also caches data in memory. The memory cache includes
the same data stored on cache disk, so a power loss doesn't cause data loss.
The memory cache size has performance impact for the array. It's recommended
the size is big. A user can configure the size by:
echo "2048" > /sys/block/md0/md/stripe_cache_size
Too small cache disk will make the write aggregation less efficient in this
mode depending on the workloads. It's recommended to use a cache disk with at
least several gigabytes size in write-back mode.
--------------------------------------
The implementation:
The write-through and write-back cache use the same disk format. The cache disk
is organized as a simple write log. The log consists of 'meta data' and 'data'
pairs. The meta data describes the data. It also includes checksum and sequence
ID for recovery identification. Data can be IO data and parity data. Data is
checksumed too. The checksum is stored in the meta data ahead of the data. The
checksum is an optimization because MD can write meta and data freely without
worry about the order. MD superblock has a field pointed to the valid meta data
of log head.
The log implementation is pretty straightforward. The difficult part is the
order in which MD writes data to cache disk and RAID disks. Specifically, in
write-through mode, MD calculates parity for IO data, writes both IO data and
parity to the log, writes the data and parity to RAID disks after the data and
parity is settled down in log and finally the IO is finished. Read just reads
from raid disks as usual.
In write-back mode, MD writes IO data to the log and reports IO completion. The
data is also fully cached in memory at that time, which means read must query
memory cache. If some conditions are met, MD will flush the data to RAID disks.
MD will calculate parity for the data and write parity into the log. After this
is finished, MD will write both data and parity into RAID disks, then MD can
release the memory cache. The flush conditions could be stripe becomes a full
stripe write, free cache disk space is low or free in-kernel memory cache space
is low.
After an unclean shutdown, MD does recovery. MD reads all meta data and data
from the log. The sequence ID and checksum will help us detect corrupted meta
data and data. If MD finds a stripe with data and valid parities (1 parity for
raid4/5 and 2 for raid6), MD will write the data and parities to RAID disks. If
parities are incompleted, they are discarded. If part of data is corrupted,
they are discarded too. MD then loads valid data and writes them to RAID disks
in normal way.

View File

@ -625,21 +625,20 @@ struct bio *bio_clone_fast(struct bio *bio, gfp_t gfp_mask, struct bio_set *bs)
}
EXPORT_SYMBOL(bio_clone_fast);
/**
* bio_clone_bioset - clone a bio
* @bio_src: bio to clone
* @gfp_mask: allocation priority
* @bs: bio_set to allocate from
*
* Clone bio. Caller will own the returned bio, but not the actual data it
* points to. Reference count of returned bio will be one.
*/
struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs)
static struct bio *__bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs, int offset,
int size)
{
struct bvec_iter iter;
struct bio_vec bv;
struct bio *bio;
struct bvec_iter iter_src = bio_src->bi_iter;
/* for supporting partial clone */
if (offset || size != bio_src->bi_iter.bi_size) {
bio_advance_iter(bio_src, &iter_src, offset);
iter_src.bi_size = size;
}
/*
* Pre immutable biovecs, __bio_clone() used to just do a memcpy from
@ -663,7 +662,8 @@ struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
* __bio_clone_fast() anyways.
*/
bio = bio_alloc_bioset(gfp_mask, bio_segments(bio_src), bs);
bio = bio_alloc_bioset(gfp_mask, __bio_segments(bio_src,
&iter_src), bs);
if (!bio)
return NULL;
bio->bi_bdev = bio_src->bi_bdev;
@ -680,7 +680,7 @@ struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
break;
default:
bio_for_each_segment(bv, bio_src, iter)
__bio_for_each_segment(bv, bio_src, iter, iter_src)
bio->bi_io_vec[bio->bi_vcnt++] = bv;
break;
}
@ -699,8 +699,43 @@ struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
return bio;
}
/**
* bio_clone_bioset - clone a bio
* @bio_src: bio to clone
* @gfp_mask: allocation priority
* @bs: bio_set to allocate from
*
* Clone bio. Caller will own the returned bio, but not the actual data it
* points to. Reference count of returned bio will be one.
*/
struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs)
{
return __bio_clone_bioset(bio_src, gfp_mask, bs, 0,
bio_src->bi_iter.bi_size);
}
EXPORT_SYMBOL(bio_clone_bioset);
/**
* bio_clone_bioset_partial - clone a partial bio
* @bio_src: bio to clone
* @gfp_mask: allocation priority
* @bs: bio_set to allocate from
* @offset: cloned starting from the offset
* @size: size for the cloned bio
*
* Clone bio. Caller will own the returned bio, but not the actual data it
* points to. Reference count of returned bio will be one.
*/
struct bio *bio_clone_bioset_partial(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs, int offset,
int size)
{
return __bio_clone_bioset(bio_src, gfp_mask, bs, offset, size);
}
EXPORT_SYMBOL(bio_clone_bioset_partial);
/**
* bio_add_pc_page - attempt to add page to bio
* @q: the target queue

View File

@ -214,7 +214,7 @@ static void faulty_make_request(struct mddev *mddev, struct bio *bio)
}
}
if (failit) {
struct bio *b = bio_clone_mddev(bio, GFP_NOIO, mddev);
struct bio *b = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
b->bi_bdev = conf->rdev->bdev;
b->bi_private = bio;

View File

@ -53,18 +53,26 @@ static inline struct dev_info *which_dev(struct mddev *mddev, sector_t sector)
return conf->disks + lo;
}
/*
* In linear_congested() conf->raid_disks is used as a copy of
* mddev->raid_disks to iterate conf->disks[], because conf->raid_disks
* and conf->disks[] are created in linear_conf(), they are always
* consitent with each other, but mddev->raid_disks does not.
*/
static int linear_congested(struct mddev *mddev, int bits)
{
struct linear_conf *conf;
int i, ret = 0;
conf = mddev->private;
rcu_read_lock();
conf = rcu_dereference(mddev->private);
for (i = 0; i < mddev->raid_disks && !ret ; i++) {
for (i = 0; i < conf->raid_disks && !ret ; i++) {
struct request_queue *q = bdev_get_queue(conf->disks[i].rdev->bdev);
ret |= bdi_congested(q->backing_dev_info, bits);
}
rcu_read_unlock();
return ret;
}
@ -144,6 +152,19 @@ static struct linear_conf *linear_conf(struct mddev *mddev, int raid_disks)
conf->disks[i-1].end_sector +
conf->disks[i].rdev->sectors;
/*
* conf->raid_disks is copy of mddev->raid_disks. The reason to
* keep a copy of mddev->raid_disks in struct linear_conf is,
* mddev->raid_disks may not be consistent with pointers number of
* conf->disks[] when it is updated in linear_add() and used to
* iterate old conf->disks[] earray in linear_congested().
* Here conf->raid_disks is always consitent with number of
* pointers in conf->disks[] array, and mddev->private is updated
* with rcu_assign_pointer() in linear_addr(), such race can be
* avoided.
*/
conf->raid_disks = raid_disks;
return conf;
out:
@ -196,15 +217,24 @@ static int linear_add(struct mddev *mddev, struct md_rdev *rdev)
if (!newconf)
return -ENOMEM;
/* newconf->raid_disks already keeps a copy of * the increased
* value of mddev->raid_disks, WARN_ONCE() is just used to make
* sure of this. It is possible that oldconf is still referenced
* in linear_congested(), therefore kfree_rcu() is used to free
* oldconf until no one uses it anymore.
*/
mddev_suspend(mddev);
oldconf = mddev->private;
oldconf = rcu_dereference_protected(mddev->private,
lockdep_is_held(&mddev->reconfig_mutex));
mddev->raid_disks++;
mddev->private = newconf;
WARN_ONCE(mddev->raid_disks != newconf->raid_disks,
"copied raid_disks doesn't match mddev->raid_disks");
rcu_assign_pointer(mddev->private, newconf);
md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev_resume(mddev);
revalidate_disk(mddev->gendisk);
kfree(oldconf);
kfree_rcu(oldconf, rcu);
return 0;
}
@ -262,6 +292,7 @@ static void linear_make_request(struct mddev *mddev, struct bio *bio)
trace_block_bio_remap(bdev_get_queue(split->bi_bdev),
split, disk_devt(mddev->gendisk),
bio_sector);
mddev_check_writesame(mddev, split);
generic_make_request(split);
}
} while (split != bio);

View File

@ -10,6 +10,7 @@ struct linear_conf
{
struct rcu_head rcu;
sector_t array_sectors;
int raid_disks; /* a copy of mddev->raid_disks */
struct dev_info disks[0];
};
#endif

View File

@ -190,16 +190,6 @@ struct bio *bio_alloc_mddev(gfp_t gfp_mask, int nr_iovecs,
}
EXPORT_SYMBOL_GPL(bio_alloc_mddev);
struct bio *bio_clone_mddev(struct bio *bio, gfp_t gfp_mask,
struct mddev *mddev)
{
if (!mddev || !mddev->bio_set)
return bio_clone(bio, gfp_mask);
return bio_clone_bioset(bio, gfp_mask, mddev->bio_set);
}
EXPORT_SYMBOL_GPL(bio_clone_mddev);
/*
* We have a system wide 'event count' that is incremented
* on any 'interesting' event, and readers of /proc/mdstat
@ -5228,8 +5218,11 @@ int md_run(struct mddev *mddev)
sysfs_notify_dirent_safe(rdev->sysfs_state);
}
if (mddev->bio_set == NULL)
if (mddev->bio_set == NULL) {
mddev->bio_set = bioset_create(BIO_POOL_SIZE, 0);
if (!mddev->bio_set)
return -ENOMEM;
}
spin_lock(&pers_lock);
pers = find_pers(mddev->level, mddev->clevel);
@ -8980,7 +8973,14 @@ static __exit void md_exit(void)
for_each_mddev(mddev, tmp) {
export_array(mddev);
mddev->ctime = 0;
mddev->hold_active = 0;
/*
* for_each_mddev() will call mddev_put() at the end of each
* iteration. As the mddev is now fully clear, this will
* schedule the mddev for destruction by a workqueue, and the
* destroy_workqueue() below will wait for that to complete.
*/
}
destroy_workqueue(md_misc_wq);
destroy_workqueue(md_wq);

View File

@ -673,8 +673,6 @@ extern void md_rdev_clear(struct md_rdev *rdev);
extern void mddev_suspend(struct mddev *mddev);
extern void mddev_resume(struct mddev *mddev);
extern struct bio *bio_clone_mddev(struct bio *bio, gfp_t gfp_mask,
struct mddev *mddev);
extern struct bio *bio_alloc_mddev(gfp_t gfp_mask, int nr_iovecs,
struct mddev *mddev);
@ -710,4 +708,11 @@ static inline void mddev_clear_unsupported_flags(struct mddev *mddev,
{
mddev->flags &= ~unsupported_flags;
}
static inline void mddev_check_writesame(struct mddev *mddev, struct bio *bio)
{
if (bio_op(bio) == REQ_OP_WRITE_SAME &&
!bdev_get_queue(bio->bi_bdev)->limits.max_write_same_sectors)
mddev->queue->limits.max_write_same_sectors = 0;
}
#endif /* _MD_MD_H */

View File

@ -138,6 +138,7 @@ static void multipath_make_request(struct mddev *mddev, struct bio * bio)
mp_bh->bio.bi_opf |= REQ_FAILFAST_TRANSPORT;
mp_bh->bio.bi_end_io = multipath_end_request;
mp_bh->bio.bi_private = mp_bh;
mddev_check_writesame(mddev, &mp_bh->bio);
generic_make_request(&mp_bh->bio);
return;
}

View File

@ -503,6 +503,7 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio)
trace_block_bio_remap(bdev_get_queue(split->bi_bdev),
split, disk_devt(mddev->gendisk),
bio_sector);
mddev_check_writesame(mddev, split);
generic_make_request(split);
}
} while (split != bio);

View File

@ -71,9 +71,8 @@
*/
static int max_queued_requests = 1024;
static void allow_barrier(struct r1conf *conf, sector_t start_next_window,
sector_t bi_sector);
static void lower_barrier(struct r1conf *conf);
static void allow_barrier(struct r1conf *conf, sector_t sector_nr);
static void lower_barrier(struct r1conf *conf, sector_t sector_nr);
#define raid1_log(md, fmt, args...) \
do { if ((md)->queue) blk_add_trace_msg((md)->queue, "raid1 " fmt, ##args); } while (0)
@ -100,7 +99,6 @@ static void r1bio_pool_free(void *r1_bio, void *data)
#define RESYNC_WINDOW_SECTORS (RESYNC_WINDOW >> 9)
#define CLUSTER_RESYNC_WINDOW (16 * RESYNC_WINDOW)
#define CLUSTER_RESYNC_WINDOW_SECTORS (CLUSTER_RESYNC_WINDOW >> 9)
#define NEXT_NORMALIO_DISTANCE (3 * RESYNC_WINDOW_SECTORS)
static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data)
{
@ -205,6 +203,7 @@ static void free_r1bio(struct r1bio *r1_bio)
static void put_buf(struct r1bio *r1_bio)
{
struct r1conf *conf = r1_bio->mddev->private;
sector_t sect = r1_bio->sector;
int i;
for (i = 0; i < conf->raid_disks * 2; i++) {
@ -215,7 +214,7 @@ static void put_buf(struct r1bio *r1_bio)
mempool_free(r1_bio, conf->r1buf_pool);
lower_barrier(conf);
lower_barrier(conf, sect);
}
static void reschedule_retry(struct r1bio *r1_bio)
@ -223,10 +222,12 @@ static void reschedule_retry(struct r1bio *r1_bio)
unsigned long flags;
struct mddev *mddev = r1_bio->mddev;
struct r1conf *conf = mddev->private;
int idx;
idx = sector_to_idx(r1_bio->sector);
spin_lock_irqsave(&conf->device_lock, flags);
list_add(&r1_bio->retry_list, &conf->retry_list);
conf->nr_queued ++;
atomic_inc(&conf->nr_queued[idx]);
spin_unlock_irqrestore(&conf->device_lock, flags);
wake_up(&conf->wait_barrier);
@ -243,7 +244,6 @@ static void call_bio_endio(struct r1bio *r1_bio)
struct bio *bio = r1_bio->master_bio;
int done;
struct r1conf *conf = r1_bio->mddev->private;
sector_t start_next_window = r1_bio->start_next_window;
sector_t bi_sector = bio->bi_iter.bi_sector;
if (bio->bi_phys_segments) {
@ -269,7 +269,7 @@ static void call_bio_endio(struct r1bio *r1_bio)
* Wake up any possible resync thread that waits for the device
* to go idle.
*/
allow_barrier(conf, start_next_window, bi_sector);
allow_barrier(conf, bi_sector);
}
}
@ -517,6 +517,25 @@ static void raid1_end_write_request(struct bio *bio)
bio_put(to_put);
}
static sector_t align_to_barrier_unit_end(sector_t start_sector,
sector_t sectors)
{
sector_t len;
WARN_ON(sectors == 0);
/*
* len is the number of sectors from start_sector to end of the
* barrier unit which start_sector belongs to.
*/
len = round_up(start_sector + 1, BARRIER_UNIT_SECTOR_SIZE) -
start_sector;
if (len > sectors)
len = sectors;
return len;
}
/*
* This routine returns the disk from which the requested read should
* be done. There is a per-array 'next expected sequential IO' sector
@ -813,168 +832,228 @@ static void flush_pending_writes(struct r1conf *conf)
*/
static void raise_barrier(struct r1conf *conf, sector_t sector_nr)
{
int idx = sector_to_idx(sector_nr);
spin_lock_irq(&conf->resync_lock);
/* Wait until no block IO is waiting */
wait_event_lock_irq(conf->wait_barrier, !conf->nr_waiting,
wait_event_lock_irq(conf->wait_barrier,
!atomic_read(&conf->nr_waiting[idx]),
conf->resync_lock);
/* block any new IO from starting */
conf->barrier++;
conf->next_resync = sector_nr;
atomic_inc(&conf->barrier[idx]);
/*
* In raise_barrier() we firstly increase conf->barrier[idx] then
* check conf->nr_pending[idx]. In _wait_barrier() we firstly
* increase conf->nr_pending[idx] then check conf->barrier[idx].
* A memory barrier here to make sure conf->nr_pending[idx] won't
* be fetched before conf->barrier[idx] is increased. Otherwise
* there will be a race between raise_barrier() and _wait_barrier().
*/
smp_mb__after_atomic();
/* For these conditions we must wait:
* A: while the array is in frozen state
* B: while barrier >= RESYNC_DEPTH, meaning resync reach
* the max count which allowed.
* C: next_resync + RESYNC_SECTORS > start_next_window, meaning
* next resync will reach to the window which normal bios are
* handling.
* D: while there are any active requests in the current window.
* B: while conf->nr_pending[idx] is not 0, meaning regular I/O
* existing in corresponding I/O barrier bucket.
* C: while conf->barrier[idx] >= RESYNC_DEPTH, meaning reaches
* max resync count which allowed on current I/O barrier bucket.
*/
wait_event_lock_irq(conf->wait_barrier,
!conf->array_frozen &&
conf->barrier < RESYNC_DEPTH &&
conf->current_window_requests == 0 &&
(conf->start_next_window >=
conf->next_resync + RESYNC_SECTORS),
!atomic_read(&conf->nr_pending[idx]) &&
atomic_read(&conf->barrier[idx]) < RESYNC_DEPTH,
conf->resync_lock);
conf->nr_pending++;
atomic_inc(&conf->nr_pending[idx]);
spin_unlock_irq(&conf->resync_lock);
}
static void lower_barrier(struct r1conf *conf)
static void lower_barrier(struct r1conf *conf, sector_t sector_nr)
{
unsigned long flags;
BUG_ON(conf->barrier <= 0);
spin_lock_irqsave(&conf->resync_lock, flags);
conf->barrier--;
conf->nr_pending--;
spin_unlock_irqrestore(&conf->resync_lock, flags);
int idx = sector_to_idx(sector_nr);
BUG_ON(atomic_read(&conf->barrier[idx]) <= 0);
atomic_dec(&conf->barrier[idx]);
atomic_dec(&conf->nr_pending[idx]);
wake_up(&conf->wait_barrier);
}
static bool need_to_wait_for_sync(struct r1conf *conf, struct bio *bio)
static void _wait_barrier(struct r1conf *conf, int idx)
{
bool wait = false;
/*
* We need to increase conf->nr_pending[idx] very early here,
* then raise_barrier() can be blocked when it waits for
* conf->nr_pending[idx] to be 0. Then we can avoid holding
* conf->resync_lock when there is no barrier raised in same
* barrier unit bucket. Also if the array is frozen, I/O
* should be blocked until array is unfrozen.
*/
atomic_inc(&conf->nr_pending[idx]);
/*
* In _wait_barrier() we firstly increase conf->nr_pending[idx], then
* check conf->barrier[idx]. In raise_barrier() we firstly increase
* conf->barrier[idx], then check conf->nr_pending[idx]. A memory
* barrier is necessary here to make sure conf->barrier[idx] won't be
* fetched before conf->nr_pending[idx] is increased. Otherwise there
* will be a race between _wait_barrier() and raise_barrier().
*/
smp_mb__after_atomic();
if (conf->array_frozen || !bio)
wait = true;
else if (conf->barrier && bio_data_dir(bio) == WRITE) {
if ((conf->mddev->curr_resync_completed
>= bio_end_sector(bio)) ||
(conf->start_next_window + NEXT_NORMALIO_DISTANCE
<= bio->bi_iter.bi_sector))
wait = false;
else
wait = true;
}
/*
* Don't worry about checking two atomic_t variables at same time
* here. If during we check conf->barrier[idx], the array is
* frozen (conf->array_frozen is 1), and chonf->barrier[idx] is
* 0, it is safe to return and make the I/O continue. Because the
* array is frozen, all I/O returned here will eventually complete
* or be queued, no race will happen. See code comment in
* frozen_array().
*/
if (!READ_ONCE(conf->array_frozen) &&
!atomic_read(&conf->barrier[idx]))
return;
return wait;
/*
* After holding conf->resync_lock, conf->nr_pending[idx]
* should be decreased before waiting for barrier to drop.
* Otherwise, we may encounter a race condition because
* raise_barrer() might be waiting for conf->nr_pending[idx]
* to be 0 at same time.
*/
spin_lock_irq(&conf->resync_lock);
atomic_inc(&conf->nr_waiting[idx]);
atomic_dec(&conf->nr_pending[idx]);
/*
* In case freeze_array() is waiting for
* get_unqueued_pending() == extra
*/
wake_up(&conf->wait_barrier);
/* Wait for the barrier in same barrier unit bucket to drop. */
wait_event_lock_irq(conf->wait_barrier,
!conf->array_frozen &&
!atomic_read(&conf->barrier[idx]),
conf->resync_lock);
atomic_inc(&conf->nr_pending[idx]);
atomic_dec(&conf->nr_waiting[idx]);
spin_unlock_irq(&conf->resync_lock);
}
static sector_t wait_barrier(struct r1conf *conf, struct bio *bio)
static void wait_read_barrier(struct r1conf *conf, sector_t sector_nr)
{
sector_t sector = 0;
int idx = sector_to_idx(sector_nr);
/*
* Very similar to _wait_barrier(). The difference is, for read
* I/O we don't need wait for sync I/O, but if the whole array
* is frozen, the read I/O still has to wait until the array is
* unfrozen. Since there is no ordering requirement with
* conf->barrier[idx] here, memory barrier is unnecessary as well.
*/
atomic_inc(&conf->nr_pending[idx]);
if (!READ_ONCE(conf->array_frozen))
return;
spin_lock_irq(&conf->resync_lock);
if (need_to_wait_for_sync(conf, bio)) {
conf->nr_waiting++;
/* Wait for the barrier to drop.
* However if there are already pending
* requests (preventing the barrier from
* rising completely), and the
* per-process bio queue isn't empty,
* then don't wait, as we need to empty
* that queue to allow conf->start_next_window
* to increase.
*/
raid1_log(conf->mddev, "wait barrier");
wait_event_lock_irq(conf->wait_barrier,
!conf->array_frozen &&
(!conf->barrier ||
((conf->start_next_window <
conf->next_resync + RESYNC_SECTORS) &&
current->bio_list &&
!bio_list_empty(current->bio_list))),
conf->resync_lock);
conf->nr_waiting--;
}
if (bio && bio_data_dir(bio) == WRITE) {
if (bio->bi_iter.bi_sector >= conf->next_resync) {
if (conf->start_next_window == MaxSector)
conf->start_next_window =
conf->next_resync +
NEXT_NORMALIO_DISTANCE;
if ((conf->start_next_window + NEXT_NORMALIO_DISTANCE)
<= bio->bi_iter.bi_sector)
conf->next_window_requests++;
else
conf->current_window_requests++;
sector = conf->start_next_window;
}
}
conf->nr_pending++;
atomic_inc(&conf->nr_waiting[idx]);
atomic_dec(&conf->nr_pending[idx]);
/*
* In case freeze_array() is waiting for
* get_unqueued_pending() == extra
*/
wake_up(&conf->wait_barrier);
/* Wait for array to be unfrozen */
wait_event_lock_irq(conf->wait_barrier,
!conf->array_frozen,
conf->resync_lock);
atomic_inc(&conf->nr_pending[idx]);
atomic_dec(&conf->nr_waiting[idx]);
spin_unlock_irq(&conf->resync_lock);
return sector;
}
static void allow_barrier(struct r1conf *conf, sector_t start_next_window,
sector_t bi_sector)
static void wait_barrier(struct r1conf *conf, sector_t sector_nr)
{
unsigned long flags;
int idx = sector_to_idx(sector_nr);
spin_lock_irqsave(&conf->resync_lock, flags);
conf->nr_pending--;
if (start_next_window) {
if (start_next_window == conf->start_next_window) {
if (conf->start_next_window + NEXT_NORMALIO_DISTANCE
<= bi_sector)
conf->next_window_requests--;
else
conf->current_window_requests--;
} else
conf->current_window_requests--;
_wait_barrier(conf, idx);
}
if (!conf->current_window_requests) {
if (conf->next_window_requests) {
conf->current_window_requests =
conf->next_window_requests;
conf->next_window_requests = 0;
conf->start_next_window +=
NEXT_NORMALIO_DISTANCE;
} else
conf->start_next_window = MaxSector;
}
}
spin_unlock_irqrestore(&conf->resync_lock, flags);
static void wait_all_barriers(struct r1conf *conf)
{
int idx;
for (idx = 0; idx < BARRIER_BUCKETS_NR; idx++)
_wait_barrier(conf, idx);
}
static void _allow_barrier(struct r1conf *conf, int idx)
{
atomic_dec(&conf->nr_pending[idx]);
wake_up(&conf->wait_barrier);
}
static void allow_barrier(struct r1conf *conf, sector_t sector_nr)
{
int idx = sector_to_idx(sector_nr);
_allow_barrier(conf, idx);
}
static void allow_all_barriers(struct r1conf *conf)
{
int idx;
for (idx = 0; idx < BARRIER_BUCKETS_NR; idx++)
_allow_barrier(conf, idx);
}
/* conf->resync_lock should be held */
static int get_unqueued_pending(struct r1conf *conf)
{
int idx, ret;
for (ret = 0, idx = 0; idx < BARRIER_BUCKETS_NR; idx++)
ret += atomic_read(&conf->nr_pending[idx]) -
atomic_read(&conf->nr_queued[idx]);
return ret;
}
static void freeze_array(struct r1conf *conf, int extra)
{
/* stop syncio and normal IO and wait for everything to
/* Stop sync I/O and normal I/O and wait for everything to
* go quite.
* We wait until nr_pending match nr_queued+extra
* This is called in the context of one normal IO request
* that has failed. Thus any sync request that might be pending
* will be blocked by nr_pending, and we need to wait for
* pending IO requests to complete or be queued for re-try.
* Thus the number queued (nr_queued) plus this request (extra)
* must match the number of pending IOs (nr_pending) before
* we continue.
* This is called in two situations:
* 1) management command handlers (reshape, remove disk, quiesce).
* 2) one normal I/O request failed.
* After array_frozen is set to 1, new sync IO will be blocked at
* raise_barrier(), and new normal I/O will blocked at _wait_barrier()
* or wait_read_barrier(). The flying I/Os will either complete or be
* queued. When everything goes quite, there are only queued I/Os left.
* Every flying I/O contributes to a conf->nr_pending[idx], idx is the
* barrier bucket index which this I/O request hits. When all sync and
* normal I/O are queued, sum of all conf->nr_pending[] will match sum
* of all conf->nr_queued[]. But normal I/O failure is an exception,
* in handle_read_error(), we may call freeze_array() before trying to
* fix the read error. In this case, the error read I/O is not queued,
* so get_unqueued_pending() == 1.
*
* Therefore before this function returns, we need to wait until
* get_unqueued_pendings(conf) gets equal to extra. For
* normal I/O context, extra is 1, in rested situations extra is 0.
*/
spin_lock_irq(&conf->resync_lock);
conf->array_frozen = 1;
raid1_log(conf->mddev, "wait freeze");
wait_event_lock_irq_cmd(conf->wait_barrier,
conf->nr_pending == conf->nr_queued+extra,
conf->resync_lock,
flush_pending_writes(conf));
wait_event_lock_irq_cmd(
conf->wait_barrier,
get_unqueued_pending(conf) == extra,
conf->resync_lock,
flush_pending_writes(conf));
spin_unlock_irq(&conf->resync_lock);
}
static void unfreeze_array(struct r1conf *conf)
@ -982,8 +1061,8 @@ static void unfreeze_array(struct r1conf *conf)
/* reverse the effect of the freeze */
spin_lock_irq(&conf->resync_lock);
conf->array_frozen = 0;
wake_up(&conf->wait_barrier);
spin_unlock_irq(&conf->resync_lock);
wake_up(&conf->wait_barrier);
}
/* duplicate the data pages for behind I/O
@ -1070,11 +1149,28 @@ static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule)
kfree(plug);
}
static void raid1_read_request(struct mddev *mddev, struct bio *bio,
struct r1bio *r1_bio)
static inline struct r1bio *
alloc_r1bio(struct mddev *mddev, struct bio *bio, sector_t sectors_handled)
{
struct r1conf *conf = mddev->private;
struct r1bio *r1_bio;
r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
r1_bio->master_bio = bio;
r1_bio->sectors = bio_sectors(bio) - sectors_handled;
r1_bio->state = 0;
r1_bio->mddev = mddev;
r1_bio->sector = bio->bi_iter.bi_sector + sectors_handled;
return r1_bio;
}
static void raid1_read_request(struct mddev *mddev, struct bio *bio)
{
struct r1conf *conf = mddev->private;
struct raid1_info *mirror;
struct r1bio *r1_bio;
struct bio *read_bio;
struct bitmap *bitmap = mddev->bitmap;
const int op = bio_op(bio);
@ -1083,8 +1179,29 @@ static void raid1_read_request(struct mddev *mddev, struct bio *bio,
int max_sectors;
int rdisk;
wait_barrier(conf, bio);
/*
* Still need barrier for READ in case that whole
* array is frozen.
*/
wait_read_barrier(conf, bio->bi_iter.bi_sector);
r1_bio = alloc_r1bio(mddev, bio, 0);
/*
* We might need to issue multiple reads to different
* devices if there are bad blocks around, so we keep
* track of the number of reads in bio->bi_phys_segments.
* If this is 0, there is only one r1_bio and no locking
* will be needed when requests complete. If it is
* non-zero, then it is the number of not-completed requests.
*/
bio->bi_phys_segments = 0;
bio_clear_flag(bio, BIO_SEG_VALID);
/*
* make_request() can abort the operation when read-ahead is being
* used and no empty request is available.
*/
read_again:
rdisk = read_balance(conf, r1_bio, &max_sectors);
@ -1106,9 +1223,8 @@ read_again:
atomic_read(&bitmap->behind_writes) == 0);
}
r1_bio->read_disk = rdisk;
r1_bio->start_next_window = 0;
read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev);
read_bio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
bio_trim(read_bio, r1_bio->sector - bio->bi_iter.bi_sector,
max_sectors);
@ -1151,22 +1267,16 @@ read_again:
*/
reschedule_retry(r1_bio);
r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
r1_bio->master_bio = bio;
r1_bio->sectors = bio_sectors(bio) - sectors_handled;
r1_bio->state = 0;
r1_bio->mddev = mddev;
r1_bio->sector = bio->bi_iter.bi_sector + sectors_handled;
r1_bio = alloc_r1bio(mddev, bio, sectors_handled);
goto read_again;
} else
generic_make_request(read_bio);
}
static void raid1_write_request(struct mddev *mddev, struct bio *bio,
struct r1bio *r1_bio)
static void raid1_write_request(struct mddev *mddev, struct bio *bio)
{
struct r1conf *conf = mddev->private;
struct r1bio *r1_bio;
int i, disks;
struct bitmap *bitmap = mddev->bitmap;
unsigned long flags;
@ -1176,7 +1286,6 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
int first_clone;
int sectors_handled;
int max_sectors;
sector_t start_next_window;
/*
* Register the new request and wait if the reconstruction
@ -1212,7 +1321,19 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
}
finish_wait(&conf->wait_barrier, &w);
}
start_next_window = wait_barrier(conf, bio);
wait_barrier(conf, bio->bi_iter.bi_sector);
r1_bio = alloc_r1bio(mddev, bio, 0);
/* We might need to issue multiple writes to different
* devices if there are bad blocks around, so we keep
* track of the number of writes in bio->bi_phys_segments.
* If this is 0, there is only one r1_bio and no locking
* will be needed when requests complete. If it is
* non-zero, then it is the number of not-completed requests.
*/
bio->bi_phys_segments = 0;
bio_clear_flag(bio, BIO_SEG_VALID);
if (conf->pending_count >= max_queued_requests) {
md_wakeup_thread(mddev->thread);
@ -1233,7 +1354,6 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
disks = conf->raid_disks * 2;
retry_write:
r1_bio->start_next_window = start_next_window;
blocked_rdev = NULL;
rcu_read_lock();
max_sectors = r1_bio->sectors;
@ -1300,25 +1420,15 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
if (unlikely(blocked_rdev)) {
/* Wait for this device to become unblocked */
int j;
sector_t old = start_next_window;
for (j = 0; j < i; j++)
if (r1_bio->bios[j])
rdev_dec_pending(conf->mirrors[j].rdev, mddev);
r1_bio->state = 0;
allow_barrier(conf, start_next_window, bio->bi_iter.bi_sector);
allow_barrier(conf, bio->bi_iter.bi_sector);
raid1_log(mddev, "wait rdev %d blocked", blocked_rdev->raid_disk);
md_wait_for_blocked_rdev(blocked_rdev, mddev);
start_next_window = wait_barrier(conf, bio);
/*
* We must make sure the multi r1bios of bio have
* the same value of bi_phys_segments
*/
if (bio->bi_phys_segments && old &&
old != start_next_window)
/* Wait for the former r1bio(s) to complete */
wait_event(conf->wait_barrier,
bio->bi_phys_segments == 1);
wait_barrier(conf, bio->bi_iter.bi_sector);
goto retry_write;
}
@ -1341,13 +1451,12 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
first_clone = 1;
for (i = 0; i < disks; i++) {
struct bio *mbio;
struct bio *mbio = NULL;
sector_t offset;
if (!r1_bio->bios[i])
continue;
mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
bio_trim(mbio, r1_bio->sector - bio->bi_iter.bi_sector,
max_sectors);
offset = r1_bio->sector - bio->bi_iter.bi_sector;
if (first_clone) {
/* do behind I/O ?
@ -1357,8 +1466,13 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
if (bitmap &&
(atomic_read(&bitmap->behind_writes)
< mddev->bitmap_info.max_write_behind) &&
!waitqueue_active(&bitmap->behind_wait))
!waitqueue_active(&bitmap->behind_wait)) {
mbio = bio_clone_bioset_partial(bio, GFP_NOIO,
mddev->bio_set,
offset << 9,
max_sectors << 9);
alloc_behind_pages(mbio, r1_bio);
}
bitmap_startwrite(bitmap, r1_bio->sector,
r1_bio->sectors,
@ -1366,6 +1480,19 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
&r1_bio->state));
first_clone = 0;
}
if (!mbio) {
if (r1_bio->behind_bvecs)
mbio = bio_clone_bioset_partial(bio, GFP_NOIO,
mddev->bio_set,
offset << 9,
max_sectors << 9);
else {
mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
bio_trim(mbio, offset, max_sectors);
}
}
if (r1_bio->behind_bvecs) {
struct bio_vec *bvec;
int j;
@ -1385,8 +1512,7 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
conf->mirrors[i].rdev->data_offset);
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
mbio->bi_opf = bio_op(bio) |
(bio->bi_opf & (REQ_SYNC | REQ_PREFLUSH | REQ_FUA));
mbio->bi_opf = bio_op(bio) | (bio->bi_opf & (REQ_SYNC | REQ_FUA));
if (test_bit(FailFast, &conf->mirrors[i].rdev->flags) &&
!test_bit(WriteMostly, &conf->mirrors[i].rdev->flags) &&
conf->raid_disks - mddev->degraded > 1)
@ -1427,12 +1553,7 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
/* We need another r1_bio. It has already been counted
* in bio->bi_phys_segments
*/
r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
r1_bio->master_bio = bio;
r1_bio->sectors = bio_sectors(bio) - sectors_handled;
r1_bio->state = 0;
r1_bio->mddev = mddev;
r1_bio->sector = bio->bi_iter.bi_sector + sectors_handled;
r1_bio = alloc_r1bio(mddev, bio, sectors_handled);
goto retry_write;
}
@ -1444,36 +1565,30 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
static void raid1_make_request(struct mddev *mddev, struct bio *bio)
{
struct r1conf *conf = mddev->private;
struct r1bio *r1_bio;
struct bio *split;
sector_t sectors;
/*
* make_request() can abort the operation when read-ahead is being
* used and no empty request is available.
*
*/
r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
if (unlikely(bio->bi_opf & REQ_PREFLUSH)) {
md_flush_request(mddev, bio);
return;
}
r1_bio->master_bio = bio;
r1_bio->sectors = bio_sectors(bio);
r1_bio->state = 0;
r1_bio->mddev = mddev;
r1_bio->sector = bio->bi_iter.bi_sector;
/* if bio exceeds barrier unit boundary, split it */
do {
sectors = align_to_barrier_unit_end(
bio->bi_iter.bi_sector, bio_sectors(bio));
if (sectors < bio_sectors(bio)) {
split = bio_split(bio, sectors, GFP_NOIO, fs_bio_set);
bio_chain(split, bio);
} else {
split = bio;
}
/*
* We might need to issue multiple reads to different devices if there
* are bad blocks around, so we keep track of the number of reads in
* bio->bi_phys_segments. If this is 0, there is only one r1_bio and
* no locking will be needed when requests complete. If it is
* non-zero, then it is the number of not-completed requests.
*/
bio->bi_phys_segments = 0;
bio_clear_flag(bio, BIO_SEG_VALID);
if (bio_data_dir(bio) == READ)
raid1_read_request(mddev, bio, r1_bio);
else
raid1_write_request(mddev, bio, r1_bio);
if (bio_data_dir(split) == READ)
raid1_read_request(mddev, split);
else
raid1_write_request(mddev, split);
} while (split != bio);
}
static void raid1_status(struct seq_file *seq, struct mddev *mddev)
@ -1564,19 +1679,11 @@ static void print_conf(struct r1conf *conf)
static void close_sync(struct r1conf *conf)
{
wait_barrier(conf, NULL);
allow_barrier(conf, 0, 0);
wait_all_barriers(conf);
allow_all_barriers(conf);
mempool_destroy(conf->r1buf_pool);
conf->r1buf_pool = NULL;
spin_lock_irq(&conf->resync_lock);
conf->next_resync = MaxSector - 2 * NEXT_NORMALIO_DISTANCE;
conf->start_next_window = MaxSector;
conf->current_window_requests +=
conf->next_window_requests;
conf->next_window_requests = 0;
spin_unlock_irq(&conf->resync_lock);
}
static int raid1_spare_active(struct mddev *mddev)
@ -2273,7 +2380,8 @@ static int narrow_write_error(struct r1bio *r1_bio, int i)
wbio->bi_vcnt = vcnt;
} else {
wbio = bio_clone_mddev(r1_bio->master_bio, GFP_NOIO, mddev);
wbio = bio_clone_fast(r1_bio->master_bio, GFP_NOIO,
mddev->bio_set);
}
bio_set_op_attrs(wbio, REQ_OP_WRITE, 0);
@ -2323,8 +2431,9 @@ static void handle_sync_write_finished(struct r1conf *conf, struct r1bio *r1_bio
static void handle_write_finished(struct r1conf *conf, struct r1bio *r1_bio)
{
int m;
int m, idx;
bool fail = false;
for (m = 0; m < conf->raid_disks * 2 ; m++)
if (r1_bio->bios[m] == IO_MADE_GOOD) {
struct md_rdev *rdev = conf->mirrors[m].rdev;
@ -2350,8 +2459,14 @@ static void handle_write_finished(struct r1conf *conf, struct r1bio *r1_bio)
if (fail) {
spin_lock_irq(&conf->device_lock);
list_add(&r1_bio->retry_list, &conf->bio_end_io_list);
conf->nr_queued++;
idx = sector_to_idx(r1_bio->sector);
atomic_inc(&conf->nr_queued[idx]);
spin_unlock_irq(&conf->device_lock);
/*
* In case freeze_array() is waiting for condition
* get_unqueued_pending() == extra to be true.
*/
wake_up(&conf->wait_barrier);
md_wakeup_thread(conf->mddev->thread);
} else {
if (test_bit(R1BIO_WriteError, &r1_bio->state))
@ -2411,7 +2526,8 @@ read_more:
const unsigned long do_sync
= r1_bio->master_bio->bi_opf & REQ_SYNC;
r1_bio->read_disk = disk;
bio = bio_clone_mddev(r1_bio->master_bio, GFP_NOIO, mddev);
bio = bio_clone_fast(r1_bio->master_bio, GFP_NOIO,
mddev->bio_set);
bio_trim(bio, r1_bio->sector - bio->bi_iter.bi_sector,
max_sectors);
r1_bio->bios[r1_bio->read_disk] = bio;
@ -2445,15 +2561,8 @@ read_more:
generic_make_request(bio);
bio = NULL;
r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO);
r1_bio->master_bio = mbio;
r1_bio->sectors = bio_sectors(mbio) - sectors_handled;
r1_bio->state = 0;
r1_bio = alloc_r1bio(mddev, mbio, sectors_handled);
set_bit(R1BIO_ReadError, &r1_bio->state);
r1_bio->mddev = mddev;
r1_bio->sector = mbio->bi_iter.bi_sector +
sectors_handled;
goto read_more;
} else {
@ -2472,6 +2581,7 @@ static void raid1d(struct md_thread *thread)
struct r1conf *conf = mddev->private;
struct list_head *head = &conf->retry_list;
struct blk_plug plug;
int idx;
md_check_recovery(mddev);
@ -2479,17 +2589,15 @@ static void raid1d(struct md_thread *thread)
!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) {
LIST_HEAD(tmp);
spin_lock_irqsave(&conf->device_lock, flags);
if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) {
while (!list_empty(&conf->bio_end_io_list)) {
list_move(conf->bio_end_io_list.prev, &tmp);
conf->nr_queued--;
}
}
if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
list_splice_init(&conf->bio_end_io_list, &tmp);
spin_unlock_irqrestore(&conf->device_lock, flags);
while (!list_empty(&tmp)) {
r1_bio = list_first_entry(&tmp, struct r1bio,
retry_list);
list_del(&r1_bio->retry_list);
idx = sector_to_idx(r1_bio->sector);
atomic_dec(&conf->nr_queued[idx]);
if (mddev->degraded)
set_bit(R1BIO_Degraded, &r1_bio->state);
if (test_bit(R1BIO_WriteError, &r1_bio->state))
@ -2510,7 +2618,8 @@ static void raid1d(struct md_thread *thread)
}
r1_bio = list_entry(head->prev, struct r1bio, retry_list);
list_del(head->prev);
conf->nr_queued--;
idx = sector_to_idx(r1_bio->sector);
atomic_dec(&conf->nr_queued[idx]);
spin_unlock_irqrestore(&conf->device_lock, flags);
mddev = r1_bio->mddev;
@ -2549,7 +2658,6 @@ static int init_resync(struct r1conf *conf)
conf->poolinfo);
if (!conf->r1buf_pool)
return -ENOMEM;
conf->next_resync = 0;
return 0;
}
@ -2578,6 +2686,7 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
int still_degraded = 0;
int good_sectors = RESYNC_SECTORS;
int min_bad = 0; /* number of sectors that are bad in all devices */
int idx = sector_to_idx(sector_nr);
if (!conf->r1buf_pool)
if (init_resync(conf))
@ -2627,7 +2736,7 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
* If there is non-resync activity waiting for a turn, then let it
* though before starting on this new sync request.
*/
if (conf->nr_waiting)
if (atomic_read(&conf->nr_waiting[idx]))
schedule_timeout_uninterruptible(1);
/* we are incrementing sector_nr below. To be safe, we check against
@ -2654,6 +2763,8 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
r1_bio->sector = sector_nr;
r1_bio->state = 0;
set_bit(R1BIO_IsSync, &r1_bio->state);
/* make sure good_sectors won't go across barrier unit boundary */
good_sectors = align_to_barrier_unit_end(sector_nr, good_sectors);
for (i = 0; i < conf->raid_disks * 2; i++) {
struct md_rdev *rdev;
@ -2884,6 +2995,26 @@ static struct r1conf *setup_conf(struct mddev *mddev)
if (!conf)
goto abort;
conf->nr_pending = kcalloc(BARRIER_BUCKETS_NR,
sizeof(atomic_t), GFP_KERNEL);
if (!conf->nr_pending)
goto abort;
conf->nr_waiting = kcalloc(BARRIER_BUCKETS_NR,
sizeof(atomic_t), GFP_KERNEL);
if (!conf->nr_waiting)
goto abort;
conf->nr_queued = kcalloc(BARRIER_BUCKETS_NR,
sizeof(atomic_t), GFP_KERNEL);
if (!conf->nr_queued)
goto abort;
conf->barrier = kcalloc(BARRIER_BUCKETS_NR,
sizeof(atomic_t), GFP_KERNEL);
if (!conf->barrier)
goto abort;
conf->mirrors = kzalloc(sizeof(struct raid1_info)
* mddev->raid_disks * 2,
GFP_KERNEL);
@ -2939,9 +3070,6 @@ static struct r1conf *setup_conf(struct mddev *mddev)
conf->pending_count = 0;
conf->recovery_disabled = mddev->recovery_disabled - 1;
conf->start_next_window = MaxSector;
conf->current_window_requests = conf->next_window_requests = 0;
err = -EIO;
for (i = 0; i < conf->raid_disks * 2; i++) {
@ -2984,6 +3112,10 @@ static struct r1conf *setup_conf(struct mddev *mddev)
kfree(conf->mirrors);
safe_put_page(conf->tmppage);
kfree(conf->poolinfo);
kfree(conf->nr_pending);
kfree(conf->nr_waiting);
kfree(conf->nr_queued);
kfree(conf->barrier);
kfree(conf);
}
return ERR_PTR(err);
@ -3085,6 +3217,10 @@ static void raid1_free(struct mddev *mddev, void *priv)
kfree(conf->mirrors);
safe_put_page(conf->tmppage);
kfree(conf->poolinfo);
kfree(conf->nr_pending);
kfree(conf->nr_waiting);
kfree(conf->nr_queued);
kfree(conf->barrier);
kfree(conf);
}

View File

@ -1,6 +1,30 @@
#ifndef _RAID1_H
#define _RAID1_H
/*
* each barrier unit size is 64MB fow now
* note: it must be larger than RESYNC_DEPTH
*/
#define BARRIER_UNIT_SECTOR_BITS 17
#define BARRIER_UNIT_SECTOR_SIZE (1<<17)
/*
* In struct r1conf, the following members are related to I/O barrier
* buckets,
* atomic_t *nr_pending;
* atomic_t *nr_waiting;
* atomic_t *nr_queued;
* atomic_t *barrier;
* Each of them points to array of atomic_t variables, each array is
* designed to have BARRIER_BUCKETS_NR elements and occupy a single
* memory page. The data width of atomic_t variables is 4 bytes, equal
* to 1<<(ilog2(sizeof(atomic_t))), BARRIER_BUCKETS_NR_BITS is defined
* as (PAGE_SHIFT - ilog2(sizeof(int))) to make sure an array of
* atomic_t variables with BARRIER_BUCKETS_NR elements just exactly
* occupies a single memory page.
*/
#define BARRIER_BUCKETS_NR_BITS (PAGE_SHIFT - ilog2(sizeof(atomic_t)))
#define BARRIER_BUCKETS_NR (1<<BARRIER_BUCKETS_NR_BITS)
struct raid1_info {
struct md_rdev *rdev;
sector_t head_position;
@ -35,25 +59,6 @@ struct r1conf {
*/
int raid_disks;
/* During resync, read_balancing is only allowed on the part
* of the array that has been resynced. 'next_resync' tells us
* where that is.
*/
sector_t next_resync;
/* When raid1 starts resync, we divide array into four partitions
* |---------|--------------|---------------------|-------------|
* next_resync start_next_window end_window
* start_next_window = next_resync + NEXT_NORMALIO_DISTANCE
* end_window = start_next_window + NEXT_NORMALIO_DISTANCE
* current_window_requests means the count of normalIO between
* start_next_window and end_window.
* next_window_requests means the count of normalIO after end_window.
* */
sector_t start_next_window;
int current_window_requests;
int next_window_requests;
spinlock_t device_lock;
/* list of 'struct r1bio' that need to be processed by raid1d,
@ -79,10 +84,10 @@ struct r1conf {
*/
wait_queue_head_t wait_barrier;
spinlock_t resync_lock;
int nr_pending;
int nr_waiting;
int nr_queued;
int barrier;
atomic_t *nr_pending;
atomic_t *nr_waiting;
atomic_t *nr_queued;
atomic_t *barrier;
int array_frozen;
/* Set to 1 if a full sync is needed, (fresh device added).
@ -135,7 +140,6 @@ struct r1bio {
* in this BehindIO request
*/
sector_t sector;
sector_t start_next_window;
int sectors;
unsigned long state;
struct mddev *mddev;
@ -185,4 +189,10 @@ enum r1bio_state {
R1BIO_WriteError,
R1BIO_FailFast,
};
static inline int sector_to_idx(sector_t sector)
{
return hash_long(sector >> BARRIER_UNIT_SECTOR_BITS,
BARRIER_BUCKETS_NR_BITS);
}
#endif

View File

@ -1132,7 +1132,7 @@ read_again:
}
slot = r10_bio->read_slot;
read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev);
read_bio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
bio_trim(read_bio, r10_bio->sector - bio->bi_iter.bi_sector,
max_sectors);
@ -1406,7 +1406,7 @@ retry_write:
int d = r10_bio->devs[i].devnum;
if (r10_bio->devs[i].bio) {
struct md_rdev *rdev = conf->mirrors[d].rdev;
mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
bio_trim(mbio, r10_bio->sector - bio->bi_iter.bi_sector,
max_sectors);
r10_bio->devs[i].bio = mbio;
@ -1457,7 +1457,7 @@ retry_write:
smp_mb();
rdev = conf->mirrors[d].rdev;
}
mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
bio_trim(mbio, r10_bio->sector - bio->bi_iter.bi_sector,
max_sectors);
r10_bio->devs[i].repl_bio = mbio;
@ -2565,7 +2565,7 @@ static int narrow_write_error(struct r10bio *r10_bio, int i)
if (sectors > sect_to_write)
sectors = sect_to_write;
/* Write at 'sector' for 'sectors' */
wbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
wbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
bio_trim(wbio, sector - bio->bi_iter.bi_sector, sectors);
wsector = r10_bio->devs[i].addr + (sector - r10_bio->sector);
wbio->bi_iter.bi_sector = wsector +
@ -2641,8 +2641,7 @@ read_more:
mdname(mddev),
bdevname(rdev->bdev, b),
(unsigned long long)r10_bio->sector);
bio = bio_clone_mddev(r10_bio->master_bio,
GFP_NOIO, mddev);
bio = bio_clone_fast(r10_bio->master_bio, GFP_NOIO, mddev->bio_set);
bio_trim(bio, r10_bio->sector - bio->bi_iter.bi_sector, max_sectors);
r10_bio->devs[slot].bio = bio;
r10_bio->devs[slot].rdev = rdev;

View File

@ -20,6 +20,7 @@
#include <linux/crc32c.h>
#include <linux/random.h>
#include <linux/kthread.h>
#include <linux/types.h>
#include "md.h"
#include "raid5.h"
#include "bitmap.h"
@ -164,8 +165,59 @@ struct r5l_log {
struct work_struct deferred_io_work;
/* to disable write back during in degraded mode */
struct work_struct disable_writeback_work;
/* to for chunk_aligned_read in writeback mode, details below */
spinlock_t tree_lock;
struct radix_tree_root big_stripe_tree;
};
/*
* Enable chunk_aligned_read() with write back cache.
*
* Each chunk may contain more than one stripe (for example, a 256kB
* chunk contains 64 4kB-page, so this chunk contain 64 stripes). For
* chunk_aligned_read, these stripes are grouped into one "big_stripe".
* For each big_stripe, we count how many stripes of this big_stripe
* are in the write back cache. These data are tracked in a radix tree
* (big_stripe_tree). We use radix_tree item pointer as the counter.
* r5c_tree_index() is used to calculate keys for the radix tree.
*
* chunk_aligned_read() calls r5c_big_stripe_cached() to look up
* big_stripe of each chunk in the tree. If this big_stripe is in the
* tree, chunk_aligned_read() aborts. This look up is protected by
* rcu_read_lock().
*
* It is necessary to remember whether a stripe is counted in
* big_stripe_tree. Instead of adding new flag, we reuses existing flags:
* STRIPE_R5C_PARTIAL_STRIPE and STRIPE_R5C_FULL_STRIPE. If either of these
* two flags are set, the stripe is counted in big_stripe_tree. This
* requires moving set_bit(STRIPE_R5C_PARTIAL_STRIPE) to
* r5c_try_caching_write(); and moving clear_bit of
* STRIPE_R5C_PARTIAL_STRIPE and STRIPE_R5C_FULL_STRIPE to
* r5c_finish_stripe_write_out().
*/
/*
* radix tree requests lowest 2 bits of data pointer to be 2b'00.
* So it is necessary to left shift the counter by 2 bits before using it
* as data pointer of the tree.
*/
#define R5C_RADIX_COUNT_SHIFT 2
/*
* calculate key for big_stripe_tree
*
* sect: align_bi->bi_iter.bi_sector or sh->sector
*/
static inline sector_t r5c_tree_index(struct r5conf *conf,
sector_t sect)
{
sector_t offset;
offset = sector_div(sect, conf->chunk_sectors);
return sect;
}
/*
* an IO range starts from a meta data block and end at the next meta data
* block. The io unit's the meta data block tracks data/parity followed it. io
@ -337,17 +389,30 @@ void r5c_check_cached_full_stripe(struct r5conf *conf)
/*
* Total log space (in sectors) needed to flush all data in cache
*
* Currently, writing-out phase automatically includes all pending writes
* to the same sector. So the reclaim of each stripe takes up to
* (conf->raid_disks + 1) pages of log space.
* To avoid deadlock due to log space, it is necessary to reserve log
* space to flush critical stripes (stripes that occupying log space near
* last_checkpoint). This function helps check how much log space is
* required to flush all cached stripes.
*
* To totally avoid deadlock due to log space, the code reserves
* (conf->raid_disks + 1) pages for each stripe in cache, which is not
* necessary in most cases.
* To reduce log space requirements, two mechanisms are used to give cache
* flush higher priorities:
* 1. In handle_stripe_dirtying() and schedule_reconstruction(),
* stripes ALREADY in journal can be flushed w/o pending writes;
* 2. In r5l_write_stripe() and r5c_cache_data(), stripes NOT in journal
* can be delayed (r5l_add_no_space_stripe).
*
* To improve this, we will need writing-out phase to be able to NOT include
* pending writes, which will reduce the requirement to
* (conf->max_degraded + 1) pages per stripe in cache.
* In cache flush, the stripe goes through 1 and then 2. For a stripe that
* already passed 1, flushing it requires at most (conf->max_degraded + 1)
* pages of journal space. For stripes that has not passed 1, flushing it
* requires (conf->raid_disks + 1) pages of journal space. There are at
* most (conf->group_cnt + 1) stripe that passed 1. So total journal space
* required to flush all cached stripes (in pages) is:
*
* (stripe_in_journal_count - group_cnt - 1) * (max_degraded + 1) +
* (group_cnt + 1) * (raid_disks + 1)
* or
* (stripe_in_journal_count) * (max_degraded + 1) +
* (group_cnt + 1) * (raid_disks - max_degraded)
*/
static sector_t r5c_log_required_to_flush_cache(struct r5conf *conf)
{
@ -356,8 +421,9 @@ static sector_t r5c_log_required_to_flush_cache(struct r5conf *conf)
if (!r5c_is_writeback(log))
return 0;
return BLOCK_SECTORS * (conf->raid_disks + 1) *
atomic_read(&log->stripe_in_journal_count);
return BLOCK_SECTORS *
((conf->max_degraded + 1) * atomic_read(&log->stripe_in_journal_count) +
(conf->raid_disks - conf->max_degraded) * (conf->group_cnt + 1));
}
/*
@ -412,16 +478,6 @@ void r5c_make_stripe_write_out(struct stripe_head *sh)
if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
if (test_and_clear_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state)) {
BUG_ON(atomic_read(&conf->r5c_cached_partial_stripes) == 0);
atomic_dec(&conf->r5c_cached_partial_stripes);
}
if (test_and_clear_bit(STRIPE_R5C_FULL_STRIPE, &sh->state)) {
BUG_ON(atomic_read(&conf->r5c_cached_full_stripes) == 0);
atomic_dec(&conf->r5c_cached_full_stripes);
}
}
static void r5c_handle_data_cached(struct stripe_head *sh)
@ -1271,6 +1327,10 @@ static void r5c_flush_stripe(struct r5conf *conf, struct stripe_head *sh)
atomic_inc(&conf->active_stripes);
r5c_make_stripe_write_out(sh);
if (test_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state))
atomic_inc(&conf->r5c_flushing_partial_stripes);
else
atomic_inc(&conf->r5c_flushing_full_stripes);
raid5_release_stripe(sh);
}
@ -1313,12 +1373,16 @@ static void r5c_do_reclaim(struct r5conf *conf)
unsigned long flags;
int total_cached;
int stripes_to_flush;
int flushing_partial, flushing_full;
if (!r5c_is_writeback(log))
return;
flushing_partial = atomic_read(&conf->r5c_flushing_partial_stripes);
flushing_full = atomic_read(&conf->r5c_flushing_full_stripes);
total_cached = atomic_read(&conf->r5c_cached_partial_stripes) +
atomic_read(&conf->r5c_cached_full_stripes);
atomic_read(&conf->r5c_cached_full_stripes) -
flushing_full - flushing_partial;
if (total_cached > conf->min_nr_stripes * 3 / 4 ||
atomic_read(&conf->empty_inactive_list_nr) > 0)
@ -1328,7 +1392,7 @@ static void r5c_do_reclaim(struct r5conf *conf)
*/
stripes_to_flush = R5C_RECLAIM_STRIPE_GROUP;
else if (total_cached > conf->min_nr_stripes * 1 / 2 ||
atomic_read(&conf->r5c_cached_full_stripes) >
atomic_read(&conf->r5c_cached_full_stripes) - flushing_full >
R5C_FULL_STRIPE_FLUSH_BATCH)
/*
* if stripe cache pressure moderate, or if there is many full
@ -1362,9 +1426,9 @@ static void r5c_do_reclaim(struct r5conf *conf)
!test_bit(STRIPE_HANDLE, &sh->state) &&
atomic_read(&sh->count) == 0) {
r5c_flush_stripe(conf, sh);
if (count++ >= R5C_RECLAIM_STRIPE_GROUP)
break;
}
if (count++ >= R5C_RECLAIM_STRIPE_GROUP)
break;
}
spin_unlock(&conf->device_lock);
spin_unlock_irqrestore(&log->stripe_in_journal_lock, flags);
@ -2320,6 +2384,10 @@ int r5c_try_caching_write(struct r5conf *conf,
int i;
struct r5dev *dev;
int to_cache = 0;
void **pslot;
sector_t tree_index;
int ret;
uintptr_t refcount;
BUG_ON(!r5c_is_writeback(log));
@ -2364,6 +2432,44 @@ int r5c_try_caching_write(struct r5conf *conf,
}
}
/* if the stripe is not counted in big_stripe_tree, add it now */
if (!test_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state) &&
!test_bit(STRIPE_R5C_FULL_STRIPE, &sh->state)) {
tree_index = r5c_tree_index(conf, sh->sector);
spin_lock(&log->tree_lock);
pslot = radix_tree_lookup_slot(&log->big_stripe_tree,
tree_index);
if (pslot) {
refcount = (uintptr_t)radix_tree_deref_slot_protected(
pslot, &log->tree_lock) >>
R5C_RADIX_COUNT_SHIFT;
radix_tree_replace_slot(
&log->big_stripe_tree, pslot,
(void *)((refcount + 1) << R5C_RADIX_COUNT_SHIFT));
} else {
/*
* this radix_tree_insert can fail safely, so no
* need to call radix_tree_preload()
*/
ret = radix_tree_insert(
&log->big_stripe_tree, tree_index,
(void *)(1 << R5C_RADIX_COUNT_SHIFT));
if (ret) {
spin_unlock(&log->tree_lock);
r5c_make_stripe_write_out(sh);
return -EAGAIN;
}
}
spin_unlock(&log->tree_lock);
/*
* set STRIPE_R5C_PARTIAL_STRIPE, this shows the stripe is
* counted in the radix tree
*/
set_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state);
atomic_inc(&conf->r5c_cached_partial_stripes);
}
for (i = disks; i--; ) {
dev = &sh->dev[i];
if (dev->towrite) {
@ -2438,17 +2544,20 @@ void r5c_finish_stripe_write_out(struct r5conf *conf,
struct stripe_head *sh,
struct stripe_head_state *s)
{
struct r5l_log *log = conf->log;
int i;
int do_wakeup = 0;
sector_t tree_index;
void **pslot;
uintptr_t refcount;
if (!conf->log ||
!test_bit(R5_InJournal, &sh->dev[sh->pd_idx].flags))
if (!log || !test_bit(R5_InJournal, &sh->dev[sh->pd_idx].flags))
return;
WARN_ON(test_bit(STRIPE_R5C_CACHING, &sh->state));
clear_bit(R5_InJournal, &sh->dev[sh->pd_idx].flags);
if (conf->log->r5c_journal_mode == R5C_JOURNAL_MODE_WRITE_THROUGH)
if (log->r5c_journal_mode == R5C_JOURNAL_MODE_WRITE_THROUGH)
return;
for (i = sh->disks; i--; ) {
@ -2470,12 +2579,45 @@ void r5c_finish_stripe_write_out(struct r5conf *conf,
if (do_wakeup)
wake_up(&conf->wait_for_overlap);
spin_lock_irq(&conf->log->stripe_in_journal_lock);
spin_lock_irq(&log->stripe_in_journal_lock);
list_del_init(&sh->r5c);
spin_unlock_irq(&conf->log->stripe_in_journal_lock);
spin_unlock_irq(&log->stripe_in_journal_lock);
sh->log_start = MaxSector;
atomic_dec(&conf->log->stripe_in_journal_count);
r5c_update_log_state(conf->log);
atomic_dec(&log->stripe_in_journal_count);
r5c_update_log_state(log);
/* stop counting this stripe in big_stripe_tree */
if (test_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state) ||
test_bit(STRIPE_R5C_FULL_STRIPE, &sh->state)) {
tree_index = r5c_tree_index(conf, sh->sector);
spin_lock(&log->tree_lock);
pslot = radix_tree_lookup_slot(&log->big_stripe_tree,
tree_index);
BUG_ON(pslot == NULL);
refcount = (uintptr_t)radix_tree_deref_slot_protected(
pslot, &log->tree_lock) >>
R5C_RADIX_COUNT_SHIFT;
if (refcount == 1)
radix_tree_delete(&log->big_stripe_tree, tree_index);
else
radix_tree_replace_slot(
&log->big_stripe_tree, pslot,
(void *)((refcount - 1) << R5C_RADIX_COUNT_SHIFT));
spin_unlock(&log->tree_lock);
}
if (test_and_clear_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state)) {
BUG_ON(atomic_read(&conf->r5c_cached_partial_stripes) == 0);
atomic_dec(&conf->r5c_flushing_partial_stripes);
atomic_dec(&conf->r5c_cached_partial_stripes);
}
if (test_and_clear_bit(STRIPE_R5C_FULL_STRIPE, &sh->state)) {
BUG_ON(atomic_read(&conf->r5c_cached_full_stripes) == 0);
atomic_dec(&conf->r5c_flushing_full_stripes);
atomic_dec(&conf->r5c_cached_full_stripes);
}
}
int
@ -2535,6 +2677,22 @@ r5c_cache_data(struct r5l_log *log, struct stripe_head *sh,
return 0;
}
/* check whether this big stripe is in write back cache. */
bool r5c_big_stripe_cached(struct r5conf *conf, sector_t sect)
{
struct r5l_log *log = conf->log;
sector_t tree_index;
void *slot;
if (!log)
return false;
WARN_ON_ONCE(!rcu_read_lock_held());
tree_index = r5c_tree_index(conf, sect);
slot = radix_tree_lookup(&log->big_stripe_tree, tree_index);
return slot != NULL;
}
static int r5l_load_log(struct r5l_log *log)
{
struct md_rdev *rdev = log->rdev;
@ -2681,6 +2839,9 @@ int r5l_init_log(struct r5conf *conf, struct md_rdev *rdev)
if (!log->meta_pool)
goto out_mempool;
spin_lock_init(&log->tree_lock);
INIT_RADIX_TREE(&log->big_stripe_tree, GFP_NOWAIT | __GFP_NOWARN);
log->reclaim_thread = md_register_thread(r5l_reclaim_thread,
log->rdev->mddev, "reclaim");
if (!log->reclaim_thread)

View File

@ -281,13 +281,13 @@ static void do_release_stripe(struct r5conf *conf, struct stripe_head *sh,
atomic_dec(&conf->r5c_cached_partial_stripes);
list_add_tail(&sh->lru, &conf->r5c_full_stripe_list);
r5c_check_cached_full_stripe(conf);
} else {
/* partial stripe */
if (!test_and_set_bit(STRIPE_R5C_PARTIAL_STRIPE,
&sh->state))
atomic_inc(&conf->r5c_cached_partial_stripes);
} else
/*
* STRIPE_R5C_PARTIAL_STRIPE is set in
* r5c_try_caching_write(). No need to
* set it again.
*/
list_add_tail(&sh->lru, &conf->r5c_partial_stripe_list);
}
}
}
}
@ -353,17 +353,15 @@ static void release_inactive_stripe_list(struct r5conf *conf,
static int release_stripe_list(struct r5conf *conf,
struct list_head *temp_inactive_list)
{
struct stripe_head *sh;
struct stripe_head *sh, *t;
int count = 0;
struct llist_node *head;
head = llist_del_all(&conf->released_stripes);
head = llist_reverse_order(head);
while (head) {
llist_for_each_entry_safe(sh, t, head, release_list) {
int hash;
sh = llist_entry(head, struct stripe_head, release_list);
head = llist_next(head);
/* sh could be readded after STRIPE_ON_RELEASE_LIST is cleard */
smp_mb();
clear_bit(STRIPE_ON_RELEASE_LIST, &sh->state);
@ -863,6 +861,43 @@ static int use_new_offset(struct r5conf *conf, struct stripe_head *sh)
return 1;
}
static void flush_deferred_bios(struct r5conf *conf)
{
struct bio_list tmp;
struct bio *bio;
if (!conf->batch_bio_dispatch || !conf->group_cnt)
return;
bio_list_init(&tmp);
spin_lock(&conf->pending_bios_lock);
bio_list_merge(&tmp, &conf->pending_bios);
bio_list_init(&conf->pending_bios);
spin_unlock(&conf->pending_bios_lock);
while ((bio = bio_list_pop(&tmp)))
generic_make_request(bio);
}
static void defer_bio_issue(struct r5conf *conf, struct bio *bio)
{
/*
* change group_cnt will drain all bios, so this is safe
*
* A read generally means a read-modify-write, which usually means a
* randwrite, so we don't delay it
*/
if (!conf->batch_bio_dispatch || !conf->group_cnt ||
bio_op(bio) == REQ_OP_READ) {
generic_make_request(bio);
return;
}
spin_lock(&conf->pending_bios_lock);
bio_list_add(&conf->pending_bios, bio);
spin_unlock(&conf->pending_bios_lock);
md_wakeup_thread(conf->mddev->thread);
}
static void
raid5_end_read_request(struct bio *bi);
static void
@ -1043,7 +1078,7 @@ again:
trace_block_bio_remap(bdev_get_queue(bi->bi_bdev),
bi, disk_devt(conf->mddev->gendisk),
sh->dev[i].sector);
generic_make_request(bi);
defer_bio_issue(conf, bi);
}
if (rrdev) {
if (s->syncing || s->expanding || s->expanded
@ -1088,7 +1123,7 @@ again:
trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev),
rbi, disk_devt(conf->mddev->gendisk),
sh->dev[i].sector);
generic_make_request(rbi);
defer_bio_issue(conf, rbi);
}
if (!rdev && !rrdev) {
if (op_is_write(op))
@ -2914,12 +2949,36 @@ sector_t raid5_compute_blocknr(struct stripe_head *sh, int i, int previous)
* like to flush data in journal to RAID disks first, so complex rmw
* is handled in the write patch (handle_stripe_dirtying).
*
* 2. when journal space is critical (R5C_LOG_CRITICAL=1)
*
* It is important to be able to flush all stripes in raid5-cache.
* Therefore, we need reserve some space on the journal device for
* these flushes. If flush operation includes pending writes to the
* stripe, we need to reserve (conf->raid_disk + 1) pages per stripe
* for the flush out. If we exclude these pending writes from flush
* operation, we only need (conf->max_degraded + 1) pages per stripe.
* Therefore, excluding pending writes in these cases enables more
* efficient use of the journal device.
*
* Note: To make sure the stripe makes progress, we only delay
* towrite for stripes with data already in journal (injournal > 0).
* When LOG_CRITICAL, stripes with injournal == 0 will be sent to
* no_space_stripes list.
*
*/
static inline bool delay_towrite(struct r5dev *dev,
struct stripe_head_state *s)
static inline bool delay_towrite(struct r5conf *conf,
struct r5dev *dev,
struct stripe_head_state *s)
{
return !test_bit(R5_OVERWRITE, &dev->flags) &&
!test_bit(R5_Insync, &dev->flags) && s->injournal;
/* case 1 above */
if (!test_bit(R5_OVERWRITE, &dev->flags) &&
!test_bit(R5_Insync, &dev->flags) && s->injournal)
return true;
/* case 2 above */
if (test_bit(R5C_LOG_CRITICAL, &conf->cache_state) &&
s->injournal > 0)
return true;
return false;
}
static void
@ -2942,7 +3001,7 @@ schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (dev->towrite && !delay_towrite(dev, s)) {
if (dev->towrite && !delay_towrite(conf, dev, s)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantdrain, &dev->flags);
if (!expand)
@ -3694,7 +3753,7 @@ static int handle_stripe_dirtying(struct r5conf *conf,
} else for (i = disks; i--; ) {
/* would I have to read this buffer for read_modify_write */
struct r5dev *dev = &sh->dev[i];
if (((dev->towrite && !delay_towrite(dev, s)) ||
if (((dev->towrite && !delay_towrite(conf, dev, s)) ||
i == sh->pd_idx || i == sh->qd_idx ||
test_bit(R5_InJournal, &dev->flags)) &&
!test_bit(R5_LOCKED, &dev->flags) &&
@ -3718,8 +3777,8 @@ static int handle_stripe_dirtying(struct r5conf *conf,
}
}
pr_debug("for sector %llu, rmw=%d rcw=%d\n",
(unsigned long long)sh->sector, rmw, rcw);
pr_debug("for sector %llu state 0x%lx, rmw=%d rcw=%d\n",
(unsigned long long)sh->sector, sh->state, rmw, rcw);
set_bit(STRIPE_HANDLE, &sh->state);
if ((rmw < rcw || (rmw == rcw && conf->rmw_level == PARITY_PREFER_RMW)) && rmw > 0) {
/* prefer read-modify-write, but need to get some data */
@ -3759,7 +3818,7 @@ static int handle_stripe_dirtying(struct r5conf *conf,
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (((dev->towrite && !delay_towrite(dev, s)) ||
if (((dev->towrite && !delay_towrite(conf, dev, s)) ||
i == sh->pd_idx || i == sh->qd_idx ||
test_bit(R5_InJournal, &dev->flags)) &&
!test_bit(R5_LOCKED, &dev->flags) &&
@ -4995,9 +5054,9 @@ static int raid5_read_one_chunk(struct mddev *mddev, struct bio *raid_bio)
return 0;
}
/*
* use bio_clone_mddev to make a copy of the bio
* use bio_clone_fast to make a copy of the bio
*/
align_bi = bio_clone_mddev(raid_bio, GFP_NOIO, mddev);
align_bi = bio_clone_fast(raid_bio, GFP_NOIO, mddev->bio_set);
if (!align_bi)
return 0;
/*
@ -5025,6 +5084,13 @@ static int raid5_read_one_chunk(struct mddev *mddev, struct bio *raid_bio)
rdev->recovery_offset >= end_sector)))
rdev = NULL;
}
if (r5c_big_stripe_cached(conf, align_bi->bi_iter.bi_sector)) {
rcu_read_unlock();
bio_put(align_bi);
return 0;
}
if (rdev) {
sector_t first_bad;
int bad_sectors;
@ -5381,7 +5447,6 @@ static void raid5_make_request(struct mddev *mddev, struct bio * bi)
* data on failed drives.
*/
if (rw == READ && mddev->degraded == 0 &&
!r5c_is_writeback(conf->log) &&
mddev->reshape_position == MaxSector) {
bi = chunk_aligned_read(mddev, bi);
if (!bi)
@ -6126,6 +6191,8 @@ static void raid5d(struct md_thread *thread)
mutex_unlock(&conf->cache_size_mutex);
}
flush_deferred_bios(conf);
r5l_flush_stripe_to_raid(conf->log);
async_tx_issue_pending_all();
@ -6711,6 +6778,18 @@ static struct r5conf *setup_conf(struct mddev *mddev)
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
atomic_set(&conf->active_aligned_reads, 0);
bio_list_init(&conf->pending_bios);
spin_lock_init(&conf->pending_bios_lock);
conf->batch_bio_dispatch = true;
rdev_for_each(rdev, mddev) {
if (test_bit(Journal, &rdev->flags))
continue;
if (blk_queue_nonrot(bdev_get_queue(rdev->bdev))) {
conf->batch_bio_dispatch = false;
break;
}
}
conf->bypass_threshold = BYPASS_THRESHOLD;
conf->recovery_disabled = mddev->recovery_disabled - 1;
@ -6757,6 +6836,8 @@ static struct r5conf *setup_conf(struct mddev *mddev)
INIT_LIST_HEAD(&conf->r5c_full_stripe_list);
atomic_set(&conf->r5c_cached_partial_stripes, 0);
INIT_LIST_HEAD(&conf->r5c_partial_stripe_list);
atomic_set(&conf->r5c_flushing_full_stripes, 0);
atomic_set(&conf->r5c_flushing_partial_stripes, 0);
conf->level = mddev->new_level;
conf->chunk_sectors = mddev->new_chunk_sectors;

View File

@ -663,6 +663,8 @@ struct r5conf {
struct list_head r5c_full_stripe_list;
atomic_t r5c_cached_partial_stripes;
struct list_head r5c_partial_stripe_list;
atomic_t r5c_flushing_full_stripes;
atomic_t r5c_flushing_partial_stripes;
atomic_t empty_inactive_list_nr;
struct llist_head released_stripes;
@ -684,6 +686,10 @@ struct r5conf {
int group_cnt;
int worker_cnt_per_group;
struct r5l_log *log;
struct bio_list pending_bios;
spinlock_t pending_bios_lock;
bool batch_bio_dispatch;
};
@ -788,4 +794,5 @@ extern void r5c_check_stripe_cache_usage(struct r5conf *conf);
extern void r5c_check_cached_full_stripe(struct r5conf *conf);
extern struct md_sysfs_entry r5c_journal_mode;
extern void r5c_update_on_rdev_error(struct mddev *mddev);
extern bool r5c_big_stripe_cached(struct r5conf *conf, sector_t sect);
#endif

View File

@ -183,7 +183,7 @@ static inline void bio_advance_iter(struct bio *bio, struct bvec_iter *iter,
#define bio_iter_last(bvec, iter) ((iter).bi_size == (bvec).bv_len)
static inline unsigned bio_segments(struct bio *bio)
static inline unsigned __bio_segments(struct bio *bio, struct bvec_iter *bvec)
{
unsigned segs = 0;
struct bio_vec bv;
@ -205,12 +205,17 @@ static inline unsigned bio_segments(struct bio *bio)
break;
}
bio_for_each_segment(bv, bio, iter)
__bio_for_each_segment(bv, bio, iter, *bvec)
segs++;
return segs;
}
static inline unsigned bio_segments(struct bio *bio)
{
return __bio_segments(bio, &bio->bi_iter);
}
/*
* get a reference to a bio, so it won't disappear. the intended use is
* something like:
@ -384,6 +389,8 @@ extern void bio_put(struct bio *);
extern void __bio_clone_fast(struct bio *, struct bio *);
extern struct bio *bio_clone_fast(struct bio *, gfp_t, struct bio_set *);
extern struct bio *bio_clone_bioset(struct bio *, gfp_t, struct bio_set *bs);
extern struct bio *bio_clone_bioset_partial(struct bio *, gfp_t,
struct bio_set *, int, int);
extern struct bio_set *fs_bio_set;

View File

@ -1102,6 +1102,7 @@ void radix_tree_replace_slot(struct radix_tree_root *root,
{
replace_slot(root, NULL, slot, item, true);
}
EXPORT_SYMBOL(radix_tree_replace_slot);
/**
* radix_tree_iter_replace - replace item in a slot