diff --git a/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb b/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb new file mode 100644 index 000000000000..f1bad92bbe27 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb @@ -0,0 +1,8 @@ +What: /sys/devices/../../gisb_arb_timeout +Date: May 2014 +KernelVersion: 3.17 +Contact: Florian Fainelli +Description: + Returns the currently configured raw timeout value of the + Broadcom Set Top Box internal GISB bus arbiter. Minimum value + is 1, and maximum value is 0xffffffff. diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt index c0105de55cbd..974624ea68f6 100644 --- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -6,6 +6,8 @@ provided by Arteris. Required properties: - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family Should be "ti,omap4-l3-noc" for OMAP4 family + Should be "ti,dra7-l3-noc" for DRA7 family + Should be "ti,am4372-l3-noc" for AM43 family - reg: Contains L3 register address range for each noc domain. - ti,hwmods: "l3_main_1", ... One hwmod for each noc domain. diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt new file mode 100644 index 000000000000..e2d501d20c9a --- /dev/null +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt @@ -0,0 +1,30 @@ +Broadcom GISB bus Arbiter controller + +Required properties: + +- compatible: should be "brcm,gisb-arb" +- reg: specifies the base physical address and size of the registers +- interrupt-parent: specifies the phandle to the parent interrupt controller + this arbiter gets interrupt line from +- interrupts: specifies the two interrupts (timeout and TEA) to be used from + the parent interrupt controller + +Optional properties: + +- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB + masters are valid at the system level +- brcm,gisb-arb-master-names: string list of the litteral name of the GISB + masters. Should match the number of bits set in brcm,gisb-master-mask and + the order in which they appear + +Example: + +gisb-arb@f0400000 { + compatible = "brcm,gisb-arb"; + reg = <0xf0400000 0x800>; + interrupts = <0>, <2>; + interrupt-parent = <&sun_l2_intc>; + + brcm,gisb-arb-master-mask = <0x7>; + brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0"; +}; diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt new file mode 100644 index 000000000000..3e6a81e99804 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt @@ -0,0 +1,20 @@ +* Device tree bindings for Texas Instruments keystone pll controller + +The main pll controller used to drive theC66x CorePacs, the switch fabric, +and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and +the NETCP modules) requires a PLL Controller to manage the various clock +divisions, gating, and synchronization. + +Required properties: + +- compatible: "ti,keystone-pllctrl", "syscon" + +- reg: contains offset/length value for pll controller + registers space. + +Example: + +pllctrl: pll-controller@0x02310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; +}; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 68ff2137bae7..5ba525a10035 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -2,11 +2,8 @@ TI EDMA Required properties: - compatible : "ti,edma3" -- ti,edma-regions: Number of regions -- ti,edma-slots: Number of slots - #dma-cells: Should be set to <1> Clients should use a single channel number per DMA request. -- dma-channels: Specify total DMA channels per CC - reg: Memory map for accessing module - interrupt-parent: Interrupt controller the interrupt is routed through - interrupts: Exactly 3 interrupts need to be specified in the order: @@ -17,6 +14,13 @@ Optional properties: - ti,hwmods: Name of the hwmods associated to the EDMA - ti,edma-xbar-event-map: Crossbar event to channel map +Deprecated properties: +Listed here in case one wants to boot an old kernel with new DTB. These +properties might need to be added to the new DTS files. +- ti,edma-regions: Number of regions +- ti,edma-slots: Number of slots +- dma-channels: Specify total DMA channels per CC + Example: edma: edma@49000000 { @@ -26,9 +30,6 @@ edma: edma@49000000 { compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; ti,edma-xbar-event-map = /bits/ 16 <1 12 2 13>; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt index 653c90c34a71..1ee3bc09f319 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt @@ -6,10 +6,11 @@ The actual devices are instantiated from the child nodes of a Device Bus node. Required properties: - - compatible: Currently only Armada 370/XP SoC are supported, - with this compatible string: + - compatible: Armada 370/XP SoC are supported using the + "marvell,mvebu-devbus" compatible string. - marvell,mvebu-devbus + Orion5x SoC are supported using the + "marvell,orion-devbus" compatible string. - reg: A resource specifier for the register space. This is the base address of a chip select within @@ -22,7 +23,14 @@ Required properties: integer values for each chip-select line in use: 0 -Mandatory timing properties for child nodes: +Optional properties: + + - devbus,keep-config This property can optionally be used to keep + using the timing parameters set by the + bootloader. It makes all the timing properties + described below unused. + +Timing properties for child nodes: Read parameters: @@ -30,21 +38,26 @@ Read parameters: drive the AD bus after the completion of a device read. This prevents contentions on the Device Bus after a read cycle from a slow device. + Mandatory, except if devbus,keep-config is used. - - devbus,bus-width: Defines the bus width (e.g. <16>) + - devbus,bus-width: Defines the bus width, in bits (e.g. <16>). + Mandatory, except if devbus,keep-config is used. - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle, to read data sample. This parameter is useful for synchronous pipelined devices, where the address precedes the read data by one or two cycles. + Mandatory, except if devbus,keep-config is used. - devbus,acc-first-ps: Defines the time delay from the negation of ALE[0] to the cycle that the first read data is sampled by the controller. + Mandatory, except if devbus,keep-config is used. - devbus,acc-next-ps: Defines the time delay between the cycle that samples data N and the cycle that samples data N+1 (in burst accesses). + Mandatory, except if devbus,keep-config is used. - devbus,rd-setup-ps: Defines the time delay between DEV_CSn assertion to DEV_OEn assertion. If set to 0 (default), @@ -52,6 +65,8 @@ Read parameters: This parameter has no affect on parameter (no affect on first data sample). Set to a value smaller than . + Mandatory for "marvell,mvebu-devbus" compatible string, + except if devbus,keep-config is used. - devbus,rd-hold-ps: Defines the time between the last data sample to the de-assertion of DEV_CSn. If set to 0 (default), @@ -62,16 +77,20 @@ Read parameters: last data sampled. Also this parameter has no affect on parameter. Set to a value smaller than . + Mandatory for "marvell,mvebu-devbus" compatible string, + except if devbus,keep-config is used. Write parameters: - devbus,ale-wr-ps: Defines the time delay from the ALE[0] negation cycle to the DEV_WEn assertion. + Mandatory. - devbus,wr-low-ps: Defines the time during which DEV_WEn is active. A[2:0] and Data are kept valid as long as DEV_WEn is active. This parameter defines the setup time of address and data to DEV_WEn rise. + Mandatory. - devbus,wr-high-ps: Defines the time during which DEV_WEn is kept inactive (high) between data beats of a burst write. @@ -79,10 +98,13 @@ Write parameters: - ps. This parameter defines the hold time of address and data after DEV_WEn rise. + Mandatory. - devbus,sync-enable: Synchronous device enable. 1: True 0: False + Mandatory for "marvell,mvebu-devbus" compatible string, + except if devbus,keep-config is used. An example for an Armada XP GP board, with a 16 MiB NOR device as child is showed below. Note that the Device Bus driver is in charge of allocating diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt new file mode 100644 index 000000000000..c82f12e2d85c --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt @@ -0,0 +1,67 @@ +* Device tree bindings for Texas Instruments keystone reset + +This node is intended to allow SoC reset in case of software reset +of selected watchdogs. + +The Keystone SoCs can contain up to 4 watchdog timers to reset +SoC. Each watchdog timer event input is connected to the Reset Mux +block. The Reset Mux block can be configured to cause reset or not. + +Additionally soft or hard reset can be configured. + +Required properties: + +- compatible: ti,keystone-reset + +- ti,syscon-pll: phandle/offset pair. The phandle to syscon used to + access pll controller registers and the offset to use + reset control registers. + +- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to + access device state control registers and the offset + in order to use mux block registers for all watchdogs. + +Optional properties: + +- ti,soft-reset: Boolean option indicating soft reset. + By default hard reset is used. + +- ti,wdt-list: WDT list that can cause SoC reset. It's not related + to WDT driver, it's just needed to enable a SoC related + reset that's triggered by one of WDTs. The list is + in format: <0>, <2>; It can be in random order and + begins from 0 to 3, as keystone can contain up to 4 SoC + reset watchdogs and can be in random order. + +Example 1: +Setup keystone reset so that in case software reset or +WDT0 is triggered it issues hard reset for SoC. + +pllctrl: pll-controller@02310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; +}; + +devctrl: device-state-control@02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; +}; + +rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; +}; + +Example 2: +Setup keystone reset so that in case of software reset or +WDT0 or WDT2 is triggered it issues soft reset for SoC. + +rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>, <2>; + ti,soft-reset; +}; diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt new file mode 100644 index 000000000000..c8f775714887 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt @@ -0,0 +1,21 @@ +Allwinner sunxi Peripheral Reset Controller +=========================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be one of the following: + "allwinner,sun6i-a31-ahb1-reset" + "allwinner,sun6i-a31-clock-reset" +- reg: should be register base and length as documented in the + datasheet +- #reset-cells: 1, see below + +example: + +ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-ahb1-reset"; + reg = <0x01c202c0 0xc>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 586397cf6e9c..9f53e824b037 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -147,9 +147,6 @@ <0x44e10f90 0x40>; interrupts = <12 13 14>; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; }; gpio0: gpio@44e07000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 1704e853f163..794c73e5c4e4 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -112,9 +112,6 @@ , ; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; }; uart0: serial@44e09000 { diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 5339009b3c0c..485be42519b9 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -102,7 +102,13 @@ #define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) #define EDMA_DCHMAP 0x0100 /* 64 registers */ -#define CHMAP_EXIST BIT(24) + +/* CCCFG register */ +#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */ +#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */ +#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */ +#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */ +#define CHMAP_EXIST BIT(24) #define EDMA_MAX_DMACH 64 #define EDMA_MAX_PARAMENTRY 512 @@ -233,7 +239,6 @@ struct edma { unsigned num_region; unsigned num_slots; unsigned num_tc; - unsigned num_cc; enum dma_event_q default_queue; /* list of channels with no even trigger; terminated by "-1" */ @@ -290,12 +295,6 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no, ~(0x7 << bit), queue_no << bit); } -static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no) -{ - int bit = queue_no * 4; - edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); -} - static void __init assign_priority_to_queue(unsigned ctlr, int queue_no, int priority) { @@ -994,29 +993,23 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port, EXPORT_SYMBOL(edma_set_dest); /** - * edma_get_position - returns the current transfer points + * edma_get_position - returns the current transfer point * @slot: parameter RAM slot being examined - * @src: pointer to source port position - * @dst: pointer to destination port position + * @dst: true selects the dest position, false the source * - * Returns current source and destination addresses for a particular - * parameter RAM slot. Its channel should not be active when this is called. + * Returns the position of the current active slot */ -void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +dma_addr_t edma_get_position(unsigned slot, bool dst) { - struct edmacc_param temp; - unsigned ctlr; + u32 offs, ctlr = EDMA_CTLR(slot); - ctlr = EDMA_CTLR(slot); slot = EDMA_CHAN_SLOT(slot); - edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp); - if (src != NULL) - *src = temp.src; - if (dst != NULL) - *dst = temp.dst; + offs = PARM_OFFSET(slot); + offs += dst ? PARM_DST : PARM_SRC; + + return edma_read(ctlr, offs); } -EXPORT_SYMBOL(edma_get_position); /** * edma_set_src_index - configure DMA source address indexing @@ -1421,6 +1414,67 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); +static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, + struct edma *edma_cc) +{ + int i; + u32 value, cccfg; + s8 (*queue_priority_map)[2]; + + /* Decode the eDMA3 configuration from CCCFG register */ + cccfg = edma_read(0, EDMA_CCCFG); + + value = GET_NUM_REGN(cccfg); + edma_cc->num_region = BIT(value); + + value = GET_NUM_DMACH(cccfg); + edma_cc->num_channels = BIT(value + 1); + + value = GET_NUM_PAENTRY(cccfg); + edma_cc->num_slots = BIT(value + 4); + + value = GET_NUM_EVQUE(cccfg); + edma_cc->num_tc = value + 1; + + dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg); + dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); + dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); + dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); + dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc); + + /* Nothing need to be done if queue priority is provided */ + if (pdata->queue_priority_mapping) + return 0; + + /* + * Configure TC/queue priority as follows: + * Q0 - priority 0 + * Q1 - priority 1 + * Q2 - priority 2 + * ... + * The meaning of priority numbers: 0 highest priority, 7 lowest + * priority. So Q0 is the highest priority queue and the last queue has + * the lowest priority. + */ + queue_priority_map = devm_kzalloc(dev, + (edma_cc->num_tc + 1) * sizeof(s8), + GFP_KERNEL); + if (!queue_priority_map) + return -ENOMEM; + + for (i = 0; i < edma_cc->num_tc; i++) { + queue_priority_map[i][0] = i; + queue_priority_map[i][1] = i; + } + queue_priority_map[i][0] = -1; + queue_priority_map[i][1] = -1; + + pdata->queue_priority_mapping = queue_priority_map; + pdata->default_queue = 0; + + return 0; +} + #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) static int edma_xbar_event_map(struct device *dev, struct device_node *node, @@ -1471,65 +1525,16 @@ static int edma_of_parse_dt(struct device *dev, struct device_node *node, struct edma_soc_info *pdata) { - int ret = 0, i; - u32 value; + int ret = 0; struct property *prop; size_t sz; struct edma_rsv_info *rsv_info; - s8 (*queue_tc_map)[2], (*queue_priority_map)[2]; - - memset(pdata, 0, sizeof(struct edma_soc_info)); - - ret = of_property_read_u32(node, "dma-channels", &value); - if (ret < 0) - return ret; - pdata->n_channel = value; - - ret = of_property_read_u32(node, "ti,edma-regions", &value); - if (ret < 0) - return ret; - pdata->n_region = value; - - ret = of_property_read_u32(node, "ti,edma-slots", &value); - if (ret < 0) - return ret; - pdata->n_slot = value; - - pdata->n_cc = 1; rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL); if (!rsv_info) return -ENOMEM; pdata->rsv = rsv_info; - queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); - if (!queue_tc_map) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - queue_tc_map[i][0] = i; - queue_tc_map[i][1] = i; - } - queue_tc_map[i][0] = -1; - queue_tc_map[i][1] = -1; - - pdata->queue_tc_mapping = queue_tc_map; - - queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); - if (!queue_priority_map) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - queue_priority_map[i][0] = i; - queue_priority_map[i][1] = i; - } - queue_priority_map[i][0] = -1; - queue_priority_map[i][1] = -1; - - pdata->queue_priority_mapping = queue_priority_map; - - pdata->default_queue = 0; - prop = of_find_property(node, "ti,edma-xbar-event-map", &sz); if (prop) ret = edma_xbar_event_map(dev, node, pdata, sz); @@ -1556,6 +1561,7 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, return ERR_PTR(ret); dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap); + dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap); of_dma_controller_register(dev->of_node, of_dma_simple_xlate, &edma_filter_info); @@ -1574,7 +1580,6 @@ static int edma_probe(struct platform_device *pdev) struct edma_soc_info **info = pdev->dev.platform_data; struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL}; s8 (*queue_priority_mapping)[2]; - s8 (*queue_tc_mapping)[2]; int i, j, off, ln, found = 0; int status = -1; const s16 (*rsv_chans)[2]; @@ -1585,7 +1590,6 @@ static int edma_probe(struct platform_device *pdev) struct resource *r[EDMA_MAX_CC] = {NULL}; struct resource res[EDMA_MAX_CC]; char res_name[10]; - char irq_name[10]; struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; int ret; @@ -1650,12 +1654,10 @@ static int edma_probe(struct platform_device *pdev) if (!edma_cc[j]) return -ENOMEM; - edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, - EDMA_MAX_DMACH); - edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot, - EDMA_MAX_PARAMENTRY); - edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc, - EDMA_MAX_CC); + /* Get eDMA3 configuration from IP */ + ret = edma_setup_from_hw(dev, info[j], edma_cc[j]); + if (ret) + return ret; edma_cc[j]->default_queue = info[j]->default_queue; @@ -1707,14 +1709,21 @@ static int edma_probe(struct platform_device *pdev) if (node) { irq[j] = irq_of_parse_and_map(node, 0); + err_irq[j] = irq_of_parse_and_map(node, 2); } else { + char irq_name[10]; + sprintf(irq_name, "edma%d", j); irq[j] = platform_get_irq_byname(pdev, irq_name); + + sprintf(irq_name, "edma%d_err", j); + err_irq[j] = platform_get_irq_byname(pdev, irq_name); } edma_cc[j]->irq_res_start = irq[j]; - status = devm_request_irq(&pdev->dev, irq[j], - dma_irq_handler, 0, "edma", - &pdev->dev); + edma_cc[j]->irq_res_end = err_irq[j]; + + status = devm_request_irq(dev, irq[j], dma_irq_handler, 0, + "edma", dev); if (status < 0) { dev_dbg(&pdev->dev, "devm_request_irq %d failed --> %d\n", @@ -1722,16 +1731,8 @@ static int edma_probe(struct platform_device *pdev) return status; } - if (node) { - err_irq[j] = irq_of_parse_and_map(node, 2); - } else { - sprintf(irq_name, "edma%d_err", j); - err_irq[j] = platform_get_irq_byname(pdev, irq_name); - } - edma_cc[j]->irq_res_end = err_irq[j]; - status = devm_request_irq(&pdev->dev, err_irq[j], - dma_ccerr_handler, 0, - "edma_error", &pdev->dev); + status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0, + "edma_error", dev); if (status < 0) { dev_dbg(&pdev->dev, "devm_request_irq %d failed --> %d\n", @@ -1742,14 +1743,8 @@ static int edma_probe(struct platform_device *pdev) for (i = 0; i < edma_cc[j]->num_channels; i++) map_dmach_queue(j, i, info[j]->default_queue); - queue_tc_mapping = info[j]->queue_tc_mapping; queue_priority_mapping = info[j]->queue_priority_mapping; - /* Event queue to TC mapping */ - for (i = 0; queue_tc_mapping[i][0] != -1; i++) - map_queue_tc(j, queue_tc_mapping[i][0], - queue_tc_mapping[i][1]); - /* Event queue priority mapping */ for (i = 0; queue_priority_mapping[i][0] != -1; i++) assign_priority_to_queue(j, @@ -1762,7 +1757,7 @@ static int edma_probe(struct platform_device *pdev) if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) map_dmach_param(j); - for (i = 0; i < info[j]->n_region; i++) { + for (i = 0; i < edma_cc[j]->num_region; i++) { edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); edma_write_array(j, EDMA_QRAE, i, 0x0); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 56ea41d5f849..b85b781b05fd 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -134,13 +134,6 @@ struct platform_device da8xx_serial_device[] = { } }; -static s8 da8xx_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1} -}; - static s8 da8xx_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -148,12 +141,6 @@ static s8 da8xx_queue_priority_mapping[][2] = { {-1, -1} }; -static s8 da850_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {-1, -1} -}; - static s8 da850_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -161,12 +148,6 @@ static s8 da850_queue_priority_mapping[][2] = { }; static struct edma_soc_info da830_edma_cc0_info = { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }; @@ -177,22 +158,10 @@ static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { static struct edma_soc_info da850_edma_cc_info[] = { { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }, { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 1, - .n_cc = 1, - .queue_tc_mapping = da850_queue_tc_mapping, .queue_priority_mapping = da850_queue_priority_mapping, .default_queue = EVENTQ_0, }, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 07381d8cea62..2f3ed3a58d57 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -568,14 +568,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ @@ -585,12 +577,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 08a61b938333..0ae8114f5cc9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -852,16 +852,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { }; /* Four Transfer Controllers on DM365 */ -static s8 -dm365_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - static s8 dm365_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ @@ -873,12 +863,6 @@ dm365_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 256, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm365_queue_tc_mapping, .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 5debffba4b24..dc52657909c4 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -498,14 +498,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ @@ -515,12 +507,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 332d00d24dc2..6c3bbea7d77d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -532,16 +532,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ /* Four Transfer Controllers on DM646x */ -static s8 -dm646x_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - static s8 dm646x_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ @@ -553,12 +543,6 @@ dm646x_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 6, /* 0-1, 4-7 */ - .n_slot = 512, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm646x_queue_tc_mapping, .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 9f3258880949..788f26d21141 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 5dba5a1ee6c2..80b90e346ca0 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -115,6 +115,7 @@ void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); struct map_desc; extern void __iomem *sysram_ns_base_addr; +extern void __iomem *sysram_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_cpuidle_init(void); @@ -165,6 +166,7 @@ extern int exynos_cpu_power_state(int cpu); extern void exynos_cluster_power_down(int cluster); extern void exynos_cluster_power_up(int cluster); extern int exynos_cluster_power_state(int cluster); +extern void exynos_enter_aftr(void); extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c deleted file mode 100644 index 3dd385ebf195..000000000000 --- a/arch/arm/mach-exynos/cpuidle.c +++ /dev/null @@ -1,255 +0,0 @@ -/* linux/arch/arm/mach-exynos4/cpuidle.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#include - -#include "common.h" -#include "regs-pmu.h" - -#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0)) -#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1)) - -#define S5P_CHECK_AFTR 0xFCBA0D10 - -#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020) -#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024) - -#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) -#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) -#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) -#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) -#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) -#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) -#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) -#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) - -#define PWR_CTRL2_DIV2_UP_EN (1 << 25) -#define PWR_CTRL2_DIV1_UP_EN (1 << 24) -#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) -#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) -#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) -#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); - -static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); - -static struct cpuidle_driver exynos4_idle_driver = { - .name = "exynos4_idle", - .owner = THIS_MODULE, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE, - [1] = { - .enter = exynos4_enter_lowpower, - .exit_latency = 300, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C1", - .desc = "ARM power down", - }, - }, - .state_count = 2, - .safe_state_index = 0, -}; - -/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ -static void exynos4_set_wakeupmask(void) -{ - __raw_writel(0x0000ff3e, S5P_WAKEUP_MASK); -} - -static unsigned int g_pwr_ctrl, g_diag_reg; - -static void save_cpu_arch_register(void) -{ - /*read power control register*/ - asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc"); - /*read diagnostic register*/ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -static void restore_cpu_arch_register(void) -{ - /*write power control register*/ - asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc"); - /*write diagnostic register*/ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - -static int idle_finisher(unsigned long flags) -{ - cpu_do_idle(); - return 1; -} - -static int exynos4_enter_core0_aftr(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long tmp; - - exynos4_set_wakeupmask(); - - /* Set value of power down register for aftr mode */ - exynos_sys_powerdown_conf(SYS_AFTR); - - __raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR); - __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG); - - save_cpu_arch_register(); - - /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - tmp &= ~S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - cpu_pm_enter(); - cpu_suspend(0, idle_finisher); - -#ifdef CONFIG_SMP - if (!soc_is_exynos5250()) - scu_enable(S5P_VA_SCU); -#endif - cpu_pm_exit(); - - restore_cpu_arch_register(); - - /* - * If PMU failed while entering sleep mode, WFI will be - * ignored by PMU and then exiting cpu_do_idle(). - * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically - * in this situation. - */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { - tmp |= S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - } - - /* Clear wakeup state register */ - __raw_writel(0x0, S5P_WAKEUP_STAT); - - return index; -} - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - int new_index = index; - - /* AFTR can only be entered when cores other than CPU0 are offline */ - if (num_online_cpus() > 1 || dev->cpu != 0) - new_index = drv->safe_state_index; - - if (new_index == 0) - return arm_cpuidle_simple_enter(dev, drv, new_index); - else - return exynos4_enter_core0_aftr(dev, drv, new_index); -} - -static void __init exynos5_core_down_clk(void) -{ - unsigned int tmp; - - /* - * Enable arm clock down (in idle) and set arm divider - * ratios in WFI/WFE state. - */ - tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \ - PWR_CTRL1_CORE1_DOWN_RATIO | \ - PWR_CTRL1_DIV2_DOWN_EN | \ - PWR_CTRL1_DIV1_DOWN_EN | \ - PWR_CTRL1_USE_CORE1_WFE | \ - PWR_CTRL1_USE_CORE0_WFE | \ - PWR_CTRL1_USE_CORE1_WFI | \ - PWR_CTRL1_USE_CORE0_WFI; - __raw_writel(tmp, EXYNOS5_PWR_CTRL1); - - /* - * Enable arm clock up (on exiting idle). Set arm divider - * ratios when not in idle along with the standby duration - * ratios. - */ - tmp = PWR_CTRL2_DIV2_UP_EN | \ - PWR_CTRL2_DIV1_UP_EN | \ - PWR_CTRL2_DUR_STANDBY2_VAL | \ - PWR_CTRL2_DUR_STANDBY1_VAL | \ - PWR_CTRL2_CORE2_UP_RATIO | \ - PWR_CTRL2_CORE1_UP_RATIO; - __raw_writel(tmp, EXYNOS5_PWR_CTRL2); -} - -static int exynos_cpuidle_probe(struct platform_device *pdev) -{ - int cpu_id, ret; - struct cpuidle_device *device; - - if (soc_is_exynos5250()) - exynos5_core_down_clk(); - - if (soc_is_exynos5440()) - exynos4_idle_driver.state_count = 1; - - ret = cpuidle_register_driver(&exynos4_idle_driver); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle driver\n"); - return ret; - } - - for_each_online_cpu(cpu_id) { - device = &per_cpu(exynos4_cpuidle_device, cpu_id); - device->cpu = cpu_id; - - ret = cpuidle_register_device(device); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle device\n"); - return ret; - } - } - - return 0; -} - -static struct platform_driver exynos_cpuidle_driver = { - .probe = exynos_cpuidle_probe, - .driver = { - .name = "exynos_cpuidle", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(exynos_cpuidle_driver); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 4800b1ce3d71..bc43e22693b7 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -169,12 +169,16 @@ void exynos_restart(enum reboot_mode mode, const char *cmd) } static struct platform_device exynos_cpuidle = { - .name = "exynos_cpuidle", - .id = -1, + .name = "exynos_cpuidle", + .dev.platform_data = exynos_enter_aftr, + .id = -1, }; void __init exynos_cpuidle_init(void) { + if (soc_is_exynos5440()) + return; + platform_device_register(&exynos_cpuidle); } diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 112bc66927a1..ec02422e8499 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -32,7 +32,7 @@ extern void exynos4_secondary_startup(void); -static void __iomem *sysram_base_addr; +void __iomem *sysram_base_addr; void __iomem *sysram_ns_base_addr; static void __init exynos_smp_prepare_sysram(void) diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index aba2ff6e443d..87c0d34c7fba 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -165,9 +166,75 @@ int exynos_cluster_power_state(int cluster) S5P_CORE_LOCAL_PWR_EN); } +#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x24) : S5P_INFORM0)) +#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x20) : S5P_INFORM1)) + +#define S5P_CHECK_AFTR 0xFCBA0D10 +#define S5P_CHECK_SLEEP 0x00000BAD + +/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ +static void exynos_set_wakeupmask(long mask) +{ + __raw_writel(mask, S5P_WAKEUP_MASK); +} + +static void exynos_cpu_set_boot_vector(long flags) +{ + __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR); + __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG); +} + +void exynos_enter_aftr(void) +{ + exynos_set_wakeupmask(0x0000ff3e); + exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); + /* Set value of power down register for aftr mode */ + exynos_sys_powerdown_conf(SYS_AFTR); +} + /* For Cortex-A9 Diagnostic and Power control register */ static unsigned int save_arm_register[2]; +static void exynos_cpu_save_register(void) +{ + unsigned long tmp; + + /* Save Power control register */ + asm ("mrc p15, 0, %0, c15, c0, 0" + : "=r" (tmp) : : "cc"); + + save_arm_register[0] = tmp; + + /* Save Diagnostic register */ + asm ("mrc p15, 0, %0, c15, c0, 1" + : "=r" (tmp) : : "cc"); + + save_arm_register[1] = tmp; +} + +static void exynos_cpu_restore_register(void) +{ + unsigned long tmp; + + /* Restore Power control register */ + tmp = save_arm_register[0]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 0" + : : "r" (tmp) + : "cc"); + + /* Restore Diagnostic register */ + tmp = save_arm_register[1]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 1" + : : "r" (tmp) + : "cc"); +} + static int exynos_cpu_suspend(unsigned long arg) { #ifdef CONFIG_CACHE_L2X0 @@ -212,37 +279,34 @@ static void exynos_pm_prepare(void) __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); } -static int exynos_pm_suspend(void) +static void exynos_pm_central_suspend(void) { unsigned long tmp; /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); tmp &= ~S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); +} + +static int exynos_pm_suspend(void) +{ + unsigned long tmp; + + exynos_pm_central_suspend(); /* Setting SEQ_OPTION register */ tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (!soc_is_exynos5250()) { - /* Save Power control register */ - asm ("mrc p15, 0, %0, c15, c0, 0" - : "=r" (tmp) : : "cc"); - save_arm_register[0] = tmp; - - /* Save Diagnostic register */ - asm ("mrc p15, 0, %0, c15, c0, 1" - : "=r" (tmp) : : "cc"); - save_arm_register[1] = tmp; - } + if (!soc_is_exynos5250()) + exynos_cpu_save_register(); return 0; } -static void exynos_pm_resume(void) +static int exynos_pm_central_resume(void) { unsigned long tmp; @@ -259,21 +323,19 @@ static void exynos_pm_resume(void) /* clear the wakeup state register */ __raw_writel(0x0, S5P_WAKEUP_STAT); /* No need to perform below restore code */ - goto early_wakeup; + return -1; } - if (!soc_is_exynos5250()) { - /* Restore Power control register */ - tmp = save_arm_register[0]; - asm volatile ("mcr p15, 0, %0, c15, c0, 0" - : : "r" (tmp) - : "cc"); - /* Restore Diagnostic register */ - tmp = save_arm_register[1]; - asm volatile ("mcr p15, 0, %0, c15, c0, 1" - : : "r" (tmp) - : "cc"); - } + return 0; +} + +static void exynos_pm_resume(void) +{ + if (exynos_pm_central_resume()) + goto early_wakeup; + + if (!soc_is_exynos5250()) + exynos_cpu_restore_register(); /* For release retention */ @@ -291,7 +353,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) + if (!soc_is_exynos5250()) scu_enable(S5P_VA_SCU); early_wakeup: @@ -369,10 +431,42 @@ static const struct platform_suspend_ops exynos_suspend_ops = { .valid = suspend_valid_only_mem, }; +static int exynos_cpu_pm_notifier(struct notifier_block *self, + unsigned long cmd, void *v) +{ + int cpu = smp_processor_id(); + + switch (cmd) { + case CPU_PM_ENTER: + if (cpu == 0) { + exynos_pm_central_suspend(); + exynos_cpu_save_register(); + } + break; + + case CPU_PM_EXIT: + if (cpu == 0) { + if (!soc_is_exynos5250()) + scu_enable(S5P_VA_SCU); + exynos_cpu_restore_register(); + exynos_pm_central_resume(); + } + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block exynos_cpu_pm_notifier_block = { + .notifier_call = exynos_cpu_pm_notifier, +}; + void __init exynos_pm_init(void) { u32 tmp; + cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block); + /* Platform-specific GIC callback */ gic_arch_extn.irq_set_wake = exynos_irq_set_wake; diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 4179f6a6d595..1d13b08708f0 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -129,8 +129,6 @@ #define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_INT_LOCAL_PWR_EN 0x7 -#define S5P_CHECK_SLEEP 0x00000BAD - /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) #define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) diff --git a/drivers/Kconfig b/drivers/Kconfig index 0a0a90f52d26..0e87a34b6472 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -132,6 +132,8 @@ source "drivers/staging/Kconfig" source "drivers/platform/Kconfig" +source "drivers/soc/Kconfig" + source "drivers/clk/Kconfig" source "drivers/hwspinlock/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 7183b6af5dac..1a1790e4de6a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -33,6 +33,9 @@ obj-y += amba/ # really early. obj-$(CONFIG_DMADEVICES) += dma/ +# SOC specific infrastructure drivers. +obj-y += soc/ + obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_XEN) += xen/ diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 286342778884..a118ec1650fa 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -4,6 +4,14 @@ menu "Bus devices" +config BRCMSTB_GISB_ARB + bool "Broadcom STB GISB bus arbiter" + depends on ARM + help + Driver for the Broadcom Set Top Box System-on-a-chip internal bus + arbiter. This driver provides timeout and target abort error handling + and internal bus master decoding. + config IMX_WEIM bool "Freescale EIM DRIVER" depends on ARCH_MXC diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index f095aa771de9..6a4ea7e4af1a 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -2,6 +2,7 @@ # Makefile for the bus drivers. # +obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o obj-$(CONFIG_IMX_WEIM) += imx-weim.o obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c new file mode 100644 index 000000000000..6159b7752a64 --- /dev/null +++ b/drivers/bus/brcmstb_gisb.c @@ -0,0 +1,289 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define ARB_TIMER 0x008 +#define ARB_ERR_CAP_CLR 0x7e4 +#define ARB_ERR_CAP_CLEAR (1 << 0) +#define ARB_ERR_CAP_HI_ADDR 0x7e8 +#define ARB_ERR_CAP_ADDR 0x7ec +#define ARB_ERR_CAP_DATA 0x7f0 +#define ARB_ERR_CAP_STATUS 0x7f4 +#define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12) +#define ARB_ERR_CAP_STATUS_TEA (1 << 11) +#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2) +#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c +#define ARB_ERR_CAP_STATUS_WRITE (1 << 1) +#define ARB_ERR_CAP_STATUS_VALID (1 << 0) +#define ARB_ERR_CAP_MASTER 0x7f8 + +struct brcmstb_gisb_arb_device { + void __iomem *base; + struct mutex lock; + struct list_head next; + u32 valid_mask; + const char *master_names[sizeof(u32) * BITS_PER_BYTE]; +}; + +static LIST_HEAD(brcmstb_gisb_arb_device_list); + +static ssize_t gisb_arb_get_timeout(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev); + u32 timeout; + + mutex_lock(&gdev->lock); + timeout = ioread32(gdev->base + ARB_TIMER); + mutex_unlock(&gdev->lock); + + return sprintf(buf, "%d", timeout); +} + +static ssize_t gisb_arb_set_timeout(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev); + int val, ret; + + ret = kstrtoint(buf, 10, &val); + if (ret < 0) + return ret; + + if (val == 0 || val >= 0xffffffff) + return -EINVAL; + + mutex_lock(&gdev->lock); + iowrite32(val, gdev->base + ARB_TIMER); + mutex_unlock(&gdev->lock); + + return count; +} + +static const char * +brcmstb_gisb_master_to_str(struct brcmstb_gisb_arb_device *gdev, + u32 masters) +{ + u32 mask = gdev->valid_mask & masters; + + if (hweight_long(mask) != 1) + return NULL; + + return gdev->master_names[ffs(mask) - 1]; +} + +static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev, + const char *reason) +{ + u32 cap_status; + unsigned long arb_addr; + u32 master; + const char *m_name; + char m_fmt[11]; + + cap_status = ioread32(gdev->base + ARB_ERR_CAP_STATUS); + + /* Invalid captured address, bail out */ + if (!(cap_status & ARB_ERR_CAP_STATUS_VALID)) + return 1; + + /* Read the address and master */ + arb_addr = ioread32(gdev->base + ARB_ERR_CAP_ADDR) & 0xffffffff; +#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT)) + arb_addr |= (u64)ioread32(gdev->base + ARB_ERR_CAP_HI_ADDR) << 32; +#endif + master = ioread32(gdev->base + ARB_ERR_CAP_MASTER); + + m_name = brcmstb_gisb_master_to_str(gdev, master); + if (!m_name) { + snprintf(m_fmt, sizeof(m_fmt), "0x%08x", master); + m_name = m_fmt; + } + + pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n", + __func__, reason, arb_addr, + cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R', + cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "", + m_name); + + /* clear the GISB error */ + iowrite32(ARB_ERR_CAP_CLEAR, gdev->base + ARB_ERR_CAP_CLR); + + return 0; +} + +static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + int ret = 0; + struct brcmstb_gisb_arb_device *gdev; + + /* iterate over each GISB arb registered handlers */ + list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next) + ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error"); + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return ret; +} + +void __init brcmstb_hook_fault_code(void) +{ + hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0, + "imprecise external abort"); +} + +static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id) +{ + brcmstb_gisb_arb_decode_addr(dev_id, "timeout"); + + return IRQ_HANDLED; +} + +static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id) +{ + brcmstb_gisb_arb_decode_addr(dev_id, "target abort"); + + return IRQ_HANDLED; +} + +static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO, + gisb_arb_get_timeout, gisb_arb_set_timeout); + +static struct attribute *gisb_arb_sysfs_attrs[] = { + &dev_attr_gisb_arb_timeout.attr, + NULL, +}; + +static struct attribute_group gisb_arb_sysfs_attr_group = { + .attrs = gisb_arb_sysfs_attrs, +}; + +static int brcmstb_gisb_arb_probe(struct platform_device *pdev) +{ + struct device_node *dn = pdev->dev.of_node; + struct brcmstb_gisb_arb_device *gdev; + struct resource *r; + int err, timeout_irq, tea_irq; + unsigned int num_masters, j = 0; + int i, first, last; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + timeout_irq = platform_get_irq(pdev, 0); + tea_irq = platform_get_irq(pdev, 1); + + gdev = devm_kzalloc(&pdev->dev, sizeof(*gdev), GFP_KERNEL); + if (!gdev) + return -ENOMEM; + + mutex_init(&gdev->lock); + INIT_LIST_HEAD(&gdev->next); + + gdev->base = devm_request_and_ioremap(&pdev->dev, r); + if (!gdev->base) + return -ENOMEM; + + err = devm_request_irq(&pdev->dev, timeout_irq, + brcmstb_gisb_timeout_handler, 0, pdev->name, + gdev); + if (err < 0) + return err; + + err = devm_request_irq(&pdev->dev, tea_irq, + brcmstb_gisb_tea_handler, 0, pdev->name, + gdev); + if (err < 0) + return err; + + /* If we do not have a valid mask, assume all masters are enabled */ + if (of_property_read_u32(dn, "brcm,gisb-arb-master-mask", + &gdev->valid_mask)) + gdev->valid_mask = 0xffffffff; + + /* Proceed with reading the litteral names if we agree on the + * number of masters + */ + num_masters = of_property_count_strings(dn, + "brcm,gisb-arb-master-names"); + if (hweight_long(gdev->valid_mask) == num_masters) { + first = ffs(gdev->valid_mask) - 1; + last = fls(gdev->valid_mask) - 1; + + for (i = first; i < last; i++) { + if (!(gdev->valid_mask & BIT(i))) + continue; + + of_property_read_string_index(dn, + "brcm,gisb-arb-master-names", j, + &gdev->master_names[i]); + j++; + } + } + + err = sysfs_create_group(&pdev->dev.kobj, &gisb_arb_sysfs_attr_group); + if (err) + return err; + + platform_set_drvdata(pdev, gdev); + + list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list); + + dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n", + gdev->base, timeout_irq, tea_irq); + + return 0; +} + +static const struct of_device_id brcmstb_gisb_arb_of_match[] = { + { .compatible = "brcm,gisb-arb" }, + { }, +}; + +static struct platform_driver brcmstb_gisb_arb_driver = { + .probe = brcmstb_gisb_arb_probe, + .driver = { + .name = "brcm-gisb-arb", + .owner = THIS_MODULE, + .of_match_table = brcmstb_gisb_arb_of_match, + }, +}; + +static int __init brcm_gisb_driver_init(void) +{ + return platform_driver_register(&brcmstb_gisb_arb_driver); +} + +module_init(brcm_gisb_driver_init); diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index feeecae623f6..531ae591783b 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -1,43 +1,45 @@ /* - * OMAP4XXX L3 Interconnect error handling driver + * OMAP L3 Interconnect error handling driver * - * Copyright (C) 2011 Texas Corporation + * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/ * Santosh Shilimkar * Sricharan * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA */ -#include #include -#include -#include #include +#include #include +#include +#include +#include +#include #include #include "omap_l3_noc.h" -/* - * Interrupt Handler for L3 error detection. - * 1) Identify the L3 clockdomain partition to which the error belongs to. - * 2) Identify the slave where the error information is logged - * 3) Print the logged information. - * 4) Add dump stack to provide kernel trace. +/** + * l3_handle_target() - Handle Target specific parse and reporting + * @l3: pointer to l3 struct + * @base: base address of clkdm + * @flag_mux: flagmux corresponding to the event + * @err_src: error source index of the slave (target) * - * Two Types of errors : + * This does the second part of the error interrupt handling: + * 3) Parse in the slave information + * 4) Print the logged information. + * 5) Add dump stack to provide kernel trace. + * 6) Clear the source if known. + * + * This handles two types of errors: * 1) Custom errors in L3 : * Target like DMM/FW/EMIF generates SRESP=ERR error * 2) Standard L3 error: @@ -53,214 +55,264 @@ * can be trapped as well. But the trapping is implemented as part * secure software and hence need not be implemented here. */ +static int l3_handle_target(struct omap_l3 *l3, void __iomem *base, + struct l3_flagmux_data *flag_mux, int err_src) +{ + int k; + u32 std_err_main, clear, masterid; + u8 op_code, m_req_info; + void __iomem *l3_targ_base; + void __iomem *l3_targ_stderr, *l3_targ_slvofslsb, *l3_targ_mstaddr; + void __iomem *l3_targ_hdr, *l3_targ_info; + struct l3_target_data *l3_targ_inst; + struct l3_masters_data *master; + char *target_name, *master_name = "UN IDENTIFIED"; + char *err_description; + char err_string[30] = { 0 }; + char info_string[60] = { 0 }; + + /* We DONOT expect err_src to go out of bounds */ + BUG_ON(err_src > MAX_CLKDM_TARGETS); + + if (err_src < flag_mux->num_targ_data) { + l3_targ_inst = &flag_mux->l3_targ[err_src]; + target_name = l3_targ_inst->name; + l3_targ_base = base + l3_targ_inst->offset; + } else { + target_name = L3_TARGET_NOT_SUPPORTED; + } + + if (target_name == L3_TARGET_NOT_SUPPORTED) + return -ENODEV; + + /* Read the stderrlog_main_source from clk domain */ + l3_targ_stderr = l3_targ_base + L3_TARG_STDERRLOG_MAIN; + l3_targ_slvofslsb = l3_targ_base + L3_TARG_STDERRLOG_SLVOFSLSB; + + std_err_main = readl_relaxed(l3_targ_stderr); + + switch (std_err_main & CUSTOM_ERROR) { + case STANDARD_ERROR: + err_description = "Standard"; + snprintf(err_string, sizeof(err_string), + ": At Address: 0x%08X ", + readl_relaxed(l3_targ_slvofslsb)); + + l3_targ_mstaddr = l3_targ_base + L3_TARG_STDERRLOG_MSTADDR; + l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_HDR; + l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_INFO; + break; + + case CUSTOM_ERROR: + err_description = "Custom"; + + l3_targ_mstaddr = l3_targ_base + + L3_TARG_STDERRLOG_CINFO_MSTADDR; + l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_CINFO_OPCODE; + l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_CINFO_INFO; + break; + + default: + /* Nothing to be handled here as of now */ + return 0; + } + + /* STDERRLOG_MSTADDR Stores the NTTP master address. */ + masterid = (readl_relaxed(l3_targ_mstaddr) & + l3->mst_addr_mask) >> __ffs(l3->mst_addr_mask); + + for (k = 0, master = l3->l3_masters; k < l3->num_masters; + k++, master++) { + if (masterid == master->id) { + master_name = master->name; + break; + } + } + + op_code = readl_relaxed(l3_targ_hdr) & 0x7; + + m_req_info = readl_relaxed(l3_targ_info) & 0xF; + snprintf(info_string, sizeof(info_string), + ": %s in %s mode during %s access", + (m_req_info & BIT(0)) ? "Opcode Fetch" : "Data Access", + (m_req_info & BIT(1)) ? "Supervisor" : "User", + (m_req_info & BIT(3)) ? "Debug" : "Functional"); + + WARN(true, + "%s:L3 %s Error: MASTER %s TARGET %s (%s)%s%s\n", + dev_name(l3->dev), + err_description, + master_name, target_name, + l3_transaction_type[op_code], + err_string, info_string); + + /* clear the std error log*/ + clear = std_err_main | CLEAR_STDERR_LOG; + writel_relaxed(clear, l3_targ_stderr); + + return 0; +} + +/** + * l3_interrupt_handler() - interrupt handler for l3 events + * @irq: irq number + * @_l3: pointer to l3 structure + * + * Interrupt Handler for L3 error detection. + * 1) Identify the L3 clockdomain partition to which the error belongs to. + * 2) Identify the slave where the error information is logged + * ... handle the slave event.. + * 7) if the slave is unknown, mask out the slave. + */ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) { - - struct omap4_l3 *l3 = _l3; - int inttype, i, k; + struct omap_l3 *l3 = _l3; + int inttype, i, ret; int err_src = 0; - u32 std_err_main, err_reg, clear, masterid; - void __iomem *base, *l3_targ_base; - char *target_name, *master_name = "UN IDENTIFIED"; + u32 err_reg, mask_val; + void __iomem *base, *mask_reg; + struct l3_flagmux_data *flag_mux; /* Get the Type of interrupt */ inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; - for (i = 0; i < L3_MODULES; i++) { + for (i = 0; i < l3->num_modules; i++) { /* * Read the regerr register of the clock domain * to determine the source */ base = l3->l3_base[i]; - err_reg = __raw_readl(base + l3_flagmux[i] + - + L3_FLAGMUX_REGERR0 + (inttype << 3)); + flag_mux = l3->l3_flagmux[i]; + err_reg = readl_relaxed(base + flag_mux->offset + + L3_FLAGMUX_REGERR0 + (inttype << 3)); + + err_reg &= ~(inttype ? flag_mux->mask_app_bits : + flag_mux->mask_dbg_bits); /* Get the corresponding error and analyse */ if (err_reg) { /* Identify the source from control status register */ err_src = __ffs(err_reg); - /* Read the stderrlog_main_source from clk domain */ - l3_targ_base = base + *(l3_targ[i] + err_src); - std_err_main = __raw_readl(l3_targ_base + - L3_TARG_STDERRLOG_MAIN); - masterid = __raw_readl(l3_targ_base + - L3_TARG_STDERRLOG_MSTADDR); + ret = l3_handle_target(l3, base, flag_mux, err_src); - switch (std_err_main & CUSTOM_ERROR) { - case STANDARD_ERROR: - target_name = - l3_targ_inst_name[i][err_src]; - WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n", - target_name, - __raw_readl(l3_targ_base + - L3_TARG_STDERRLOG_SLVOFSLSB)); - /* clear the std error log*/ - clear = std_err_main | CLEAR_STDERR_LOG; - writel(clear, l3_targ_base + - L3_TARG_STDERRLOG_MAIN); - break; + /* + * Certain plaforms may have "undocumented" status + * pending on boot. So dont generate a severe warning + * here. Just mask it off to prevent the error from + * reoccuring and locking up the system. + */ + if (ret) { + dev_err(l3->dev, + "L3 %s error: target %d mod:%d %s\n", + inttype ? "debug" : "application", + err_src, i, "(unclearable)"); - case CUSTOM_ERROR: - target_name = - l3_targ_inst_name[i][err_src]; - for (k = 0; k < NUM_OF_L3_MASTERS; k++) { - if (masterid == l3_masters[k].id) - master_name = - l3_masters[k].name; - } - WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n", - master_name, target_name); - /* clear the std error log*/ - clear = std_err_main | CLEAR_STDERR_LOG; - writel(clear, l3_targ_base + - L3_TARG_STDERRLOG_MAIN); - break; + mask_reg = base + flag_mux->offset + + L3_FLAGMUX_MASK0 + (inttype << 3); + mask_val = readl_relaxed(mask_reg); + mask_val &= ~(1 << err_src); + writel_relaxed(mask_val, mask_reg); - default: - /* Nothing to be handled here as of now */ - break; + /* Mark these bits as to be ignored */ + if (inttype) + flag_mux->mask_app_bits |= 1 << err_src; + else + flag_mux->mask_dbg_bits |= 1 << err_src; } - /* Error found so break the for loop */ - break; + + /* Error found so break the for loop */ + break; } } return IRQ_HANDLED; } -static int omap4_l3_probe(struct platform_device *pdev) -{ - static struct omap4_l3 *l3; - struct resource *res; - int ret; +static const struct of_device_id l3_noc_match[] = { + {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data}, + {.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data}, + {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data}, + {}, +}; +MODULE_DEVICE_TABLE(of, l3_noc_match); - l3 = kzalloc(sizeof(*l3), GFP_KERNEL); +static int omap_l3_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + static struct omap_l3 *l3; + int ret, i, res_idx; + + of_id = of_match_device(l3_noc_match, &pdev->dev); + if (!of_id) { + dev_err(&pdev->dev, "OF data missing\n"); + return -EINVAL; + } + + l3 = devm_kzalloc(&pdev->dev, sizeof(*l3), GFP_KERNEL); if (!l3) return -ENOMEM; + memcpy(l3, of_id->data, sizeof(*l3)); + l3->dev = &pdev->dev; platform_set_drvdata(pdev, l3); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "couldn't find resource 0\n"); - ret = -ENODEV; - goto err0; - } - l3->l3_base[0] = ioremap(res->start, resource_size(res)); - if (!l3->l3_base[0]) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto err0; - } + /* Get mem resources */ + for (i = 0, res_idx = 0; i < l3->num_modules; i++) { + struct resource *res; - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "couldn't find resource 1\n"); - ret = -ENODEV; - goto err1; - } - - l3->l3_base[1] = ioremap(res->start, resource_size(res)); - if (!l3->l3_base[1]) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto err1; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - if (!res) { - dev_err(&pdev->dev, "couldn't find resource 2\n"); - ret = -ENODEV; - goto err2; - } - - l3->l3_base[2] = ioremap(res->start, resource_size(res)); - if (!l3->l3_base[2]) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto err2; + if (l3->l3_base[i] == L3_BASE_IS_SUBMODULE) { + /* First entry cannot be submodule */ + BUG_ON(i == 0); + l3->l3_base[i] = l3->l3_base[i - 1]; + continue; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, res_idx); + l3->l3_base[i] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(l3->l3_base[i])) { + dev_err(l3->dev, "ioremap %d failed\n", i); + return PTR_ERR(l3->l3_base[i]); + } + res_idx++; } /* * Setup interrupt Handlers */ l3->debug_irq = platform_get_irq(pdev, 0); - ret = request_irq(l3->debug_irq, - l3_interrupt_handler, - IRQF_DISABLED, "l3-dbg-irq", l3); + ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler, + IRQF_DISABLED, "l3-dbg-irq", l3); if (ret) { - pr_crit("L3: request_irq failed to register for 0x%x\n", - l3->debug_irq); - goto err3; + dev_err(l3->dev, "request_irq failed for %d\n", + l3->debug_irq); + return ret; } l3->app_irq = platform_get_irq(pdev, 1); - ret = request_irq(l3->app_irq, - l3_interrupt_handler, - IRQF_DISABLED, "l3-app-irq", l3); - if (ret) { - pr_crit("L3: request_irq failed to register for 0x%x\n", - l3->app_irq); - goto err4; - } + ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler, + IRQF_DISABLED, "l3-app-irq", l3); + if (ret) + dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq); - return 0; - -err4: - free_irq(l3->debug_irq, l3); -err3: - iounmap(l3->l3_base[2]); -err2: - iounmap(l3->l3_base[1]); -err1: - iounmap(l3->l3_base[0]); -err0: - kfree(l3); return ret; } -static int omap4_l3_remove(struct platform_device *pdev) -{ - struct omap4_l3 *l3 = platform_get_drvdata(pdev); - - free_irq(l3->app_irq, l3); - free_irq(l3->debug_irq, l3); - iounmap(l3->l3_base[0]); - iounmap(l3->l3_base[1]); - iounmap(l3->l3_base[2]); - kfree(l3); - - return 0; -} - -#if defined(CONFIG_OF) -static const struct of_device_id l3_noc_match[] = { - {.compatible = "ti,omap4-l3-noc", }, - {}, -}; -MODULE_DEVICE_TABLE(of, l3_noc_match); -#else -#define l3_noc_match NULL -#endif - -static struct platform_driver omap4_l3_driver = { - .probe = omap4_l3_probe, - .remove = omap4_l3_remove, +static struct platform_driver omap_l3_driver = { + .probe = omap_l3_probe, .driver = { .name = "omap_l3_noc", .owner = THIS_MODULE, - .of_match_table = l3_noc_match, + .of_match_table = of_match_ptr(l3_noc_match), }, }; -static int __init omap4_l3_init(void) +static int __init omap_l3_init(void) { - return platform_driver_register(&omap4_l3_driver); + return platform_driver_register(&omap_l3_driver); } -postcore_initcall_sync(omap4_l3_init); +postcore_initcall_sync(omap_l3_init); -static void __exit omap4_l3_exit(void) +static void __exit omap_l3_exit(void) { - platform_driver_unregister(&omap4_l3_driver); + platform_driver_unregister(&omap_l3_driver); } -module_exit(omap4_l3_exit); +module_exit(omap_l3_exit); diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h index a6ce34dc4814..551e01061434 100644 --- a/drivers/bus/omap_l3_noc.h +++ b/drivers/bus/omap_l3_noc.h @@ -1,29 +1,25 @@ /* - * OMAP4XXX L3 Interconnect error handling driver header + * OMAP L3 Interconnect error handling driver header * - * Copyright (C) 2011 Texas Corporation + * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/ * Santosh Shilimkar * sricharan * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA */ -#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H -#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H +#ifndef __OMAP_L3_NOC_H +#define __OMAP_L3_NOC_H + +#define MAX_L3_MODULES 3 +#define MAX_CLKDM_TARGETS 31 -#define L3_MODULES 3 #define CLEAR_STDERR_LOG (1 << 31) #define CUSTOM_ERROR 0x2 #define STANDARD_ERROR 0x0 @@ -33,63 +29,165 @@ /* L3 TARG register offsets */ #define L3_TARG_STDERRLOG_MAIN 0x48 +#define L3_TARG_STDERRLOG_HDR 0x4c +#define L3_TARG_STDERRLOG_MSTADDR 0x50 +#define L3_TARG_STDERRLOG_INFO 0x58 #define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c -#define L3_TARG_STDERRLOG_MSTADDR 0x68 +#define L3_TARG_STDERRLOG_CINFO_INFO 0x64 +#define L3_TARG_STDERRLOG_CINFO_MSTADDR 0x68 +#define L3_TARG_STDERRLOG_CINFO_OPCODE 0x6c #define L3_FLAGMUX_REGERR0 0xc +#define L3_FLAGMUX_MASK0 0x8 -#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0])) +#define L3_TARGET_NOT_SUPPORTED NULL -static u32 l3_flagmux[L3_MODULES] = { - 0x500, - 0x1000, - 0X0200 +#define L3_BASE_IS_SUBMODULE ((void __iomem *)(1 << 0)) + +static const char * const l3_transaction_type[] = { + /* 0 0 0 */ "Idle", + /* 0 0 1 */ "Write", + /* 0 1 0 */ "Read", + /* 0 1 1 */ "ReadEx", + /* 1 0 0 */ "Read Link", + /* 1 0 1 */ "Write Non-Posted", + /* 1 1 0 */ "Write Conditional", + /* 1 1 1 */ "Write Broadcast", }; -/* L3 Target standard Error register offsets */ -static u32 l3_targ_inst_clk1[] = { - 0x100, /* DMM1 */ - 0x200, /* DMM2 */ - 0x300, /* ABE */ - 0x400, /* L4CFG */ - 0x600, /* CLK2 PWR DISC */ - 0x0, /* Host CLK1 */ - 0x900 /* L4 Wakeup */ -}; - -static u32 l3_targ_inst_clk2[] = { - 0x500, /* CORTEX M3 */ - 0x300, /* DSS */ - 0x100, /* GPMC */ - 0x400, /* ISS */ - 0x700, /* IVAHD */ - 0xD00, /* missing in TRM corresponds to AES1*/ - 0x900, /* L4 PER0*/ - 0x200, /* OCMRAM */ - 0x100, /* missing in TRM corresponds to GPMC sERROR*/ - 0x600, /* SGX */ - 0x800, /* SL2 */ - 0x1600, /* C2C */ - 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/ - 0xF00, /* missing in TRM corrsponds to SHA1*/ - 0xE00, /* missing in TRM corresponds to AES2*/ - 0xC00, /* L4 PER3 */ - 0xA00, /* L4 PER1*/ - 0xB00, /* L4 PER2*/ - 0x0, /* HOST CLK2 */ - 0x1800, /* CAL */ - 0x1700 /* LLI */ -}; - -static u32 l3_targ_inst_clk3[] = { - 0x0100 /* EMUSS */, - 0x0300, /* DEBUGSS_CT_TBR */ - 0x0 /* HOST CLK3 */ -}; - -static struct l3_masters_data { +/** + * struct l3_masters_data - L3 Master information + * @id: ID of the L3 Master + * @name: master name + */ +struct l3_masters_data { u32 id; - char name[10]; -} l3_masters[] = { + char *name; +}; + +/** + * struct l3_target_data - L3 Target information + * @offset: Offset from base for L3 Target + * @name: Target name + * + * Target information is organized indexed by bit field definitions. + */ +struct l3_target_data { + u32 offset; + char *name; +}; + +/** + * struct l3_flagmux_data - Flag Mux information + * @offset: offset from base for flagmux register + * @l3_targ: array indexed by flagmux index (bit offset) pointing to the + * target data. unsupported ones are marked with + * L3_TARGET_NOT_SUPPORTED + * @num_targ_data: number of entries in target data + * @mask_app_bits: ignore these from raw application irq status + * @mask_dbg_bits: ignore these from raw debug irq status + */ +struct l3_flagmux_data { + u32 offset; + struct l3_target_data *l3_targ; + u8 num_targ_data; + u32 mask_app_bits; + u32 mask_dbg_bits; +}; + + +/** + * struct omap_l3 - Description of data relevant for L3 bus. + * @dev: device representing the bus (populated runtime) + * @l3_base: base addresses of modules (populated runtime if 0) + * if set to L3_BASE_IS_SUBMODULE, then uses previous + * module index as the base address + * @l3_flag_mux: array containing flag mux data per module + * offset from corresponding module base indexed per + * module. + * @num_modules: number of clock domains / modules. + * @l3_masters: array pointing to master data containing name and register + * offset for the master. + * @num_master: number of masters + * @mst_addr_mask: Mask representing MSTADDR information of NTTP packet + * @debug_irq: irq number of the debug interrupt (populated runtime) + * @app_irq: irq number of the application interrupt (populated runtime) + */ +struct omap_l3 { + struct device *dev; + + void __iomem *l3_base[MAX_L3_MODULES]; + struct l3_flagmux_data **l3_flagmux; + int num_modules; + + struct l3_masters_data *l3_masters; + int num_masters; + u32 mst_addr_mask; + + int debug_irq; + int app_irq; +}; + +static struct l3_target_data omap_l3_target_data_clk1[] = { + {0x100, "DMM1",}, + {0x200, "DMM2",}, + {0x300, "ABE",}, + {0x400, "L4CFG",}, + {0x600, "CLK2PWRDISC",}, + {0x0, "HOSTCLK1",}, + {0x900, "L4WAKEUP",}, +}; + +static struct l3_flagmux_data omap_l3_flagmux_clk1 = { + .offset = 0x500, + .l3_targ = omap_l3_target_data_clk1, + .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk1), +}; + + +static struct l3_target_data omap_l3_target_data_clk2[] = { + {0x500, "CORTEXM3",}, + {0x300, "DSS",}, + {0x100, "GPMC",}, + {0x400, "ISS",}, + {0x700, "IVAHD",}, + {0xD00, "AES1",}, + {0x900, "L4PER0",}, + {0x200, "OCMRAM",}, + {0x100, "GPMCsERROR",}, + {0x600, "SGX",}, + {0x800, "SL2",}, + {0x1600, "C2C",}, + {0x1100, "PWRDISCCLK1",}, + {0xF00, "SHA1",}, + {0xE00, "AES2",}, + {0xC00, "L4PER3",}, + {0xA00, "L4PER1",}, + {0xB00, "L4PER2",}, + {0x0, "HOSTCLK2",}, + {0x1800, "CAL",}, + {0x1700, "LLI",}, +}; + +static struct l3_flagmux_data omap_l3_flagmux_clk2 = { + .offset = 0x1000, + .l3_targ = omap_l3_target_data_clk2, + .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk2), +}; + + +static struct l3_target_data omap_l3_target_data_clk3[] = { + {0x0100, "EMUSS",}, + {0x0300, "DEBUG SOURCE",}, + {0x0, "HOST CLK3",}, +}; + +static struct l3_flagmux_data omap_l3_flagmux_clk3 = { + .offset = 0x0200, + .l3_targ = omap_l3_target_data_clk3, + .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3), +}; + +static struct l3_masters_data omap_l3_masters[] = { { 0x0 , "MPU"}, { 0x10, "CS_ADP"}, { 0x14, "xxx"}, @@ -117,60 +215,261 @@ static struct l3_masters_data { { 0xC8, "USBHOSTFS"} }; -static char *l3_targ_inst_name[L3_MODULES][21] = { - { - "DMM1", - "DMM2", - "ABE", - "L4CFG", - "CLK2 PWR DISC", - "HOST CLK1", - "L4 WAKEUP" - }, - { - "CORTEX M3" , - "DSS ", - "GPMC ", - "ISS ", - "IVAHD ", - "AES1", - "L4 PER0", - "OCMRAM ", - "GPMC sERROR", - "SGX ", - "SL2 ", - "C2C ", - "PWR DISC CLK1", - "SHA1", - "AES2", - "L4 PER3", - "L4 PER1", - "L4 PER2", - "HOST CLK2", - "CAL", - "LLI" - }, - { - "EMUSS", - "DEBUG SOURCE", - "HOST CLK3" - }, +static struct l3_flagmux_data *omap_l3_flagmux[] = { + &omap_l3_flagmux_clk1, + &omap_l3_flagmux_clk2, + &omap_l3_flagmux_clk3, }; -static u32 *l3_targ[L3_MODULES] = { - l3_targ_inst_clk1, - l3_targ_inst_clk2, - l3_targ_inst_clk3, +static const struct omap_l3 omap_l3_data = { + .l3_flagmux = omap_l3_flagmux, + .num_modules = ARRAY_SIZE(omap_l3_flagmux), + .l3_masters = omap_l3_masters, + .num_masters = ARRAY_SIZE(omap_l3_masters), + /* The 6 MSBs of register field used to distinguish initiator */ + .mst_addr_mask = 0xFC, }; -struct omap4_l3 { - struct device *dev; - struct clk *ick; - - /* memory base */ - void __iomem *l3_base[L3_MODULES]; - - int debug_irq; - int app_irq; +/* DRA7 data */ +static struct l3_target_data dra_l3_target_data_clk1[] = { + {0x2a00, "AES1",}, + {0x0200, "DMM_P1",}, + {0x0600, "DSP2_SDMA",}, + {0x0b00, "EVE2",}, + {0x1300, "DMM_P2",}, + {0x2c00, "AES2",}, + {0x0300, "DSP1_SDMA",}, + {0x0a00, "EVE1",}, + {0x0c00, "EVE3",}, + {0x0d00, "EVE4",}, + {0x2900, "DSS",}, + {0x0100, "GPMC",}, + {0x3700, "PCIE1",}, + {0x1600, "IVA_CONFIG",}, + {0x1800, "IVA_SL2IF",}, + {0x0500, "L4_CFG",}, + {0x1d00, "L4_WKUP",}, + {0x3800, "PCIE2",}, + {0x3300, "SHA2_1",}, + {0x1200, "GPU",}, + {0x1000, "IPU1",}, + {0x1100, "IPU2",}, + {0x2000, "TPCC_EDMA",}, + {0x2e00, "TPTC1_EDMA",}, + {0x2b00, "TPTC2_EDMA",}, + {0x0700, "VCP1",}, + {0x2500, "L4_PER2_P3",}, + {0x0e00, "L4_PER3_P3",}, + {0x2200, "MMU1",}, + {0x1400, "PRUSS1",}, + {0x1500, "PRUSS2"}, + {0x0800, "VCP1",}, }; -#endif + +static struct l3_flagmux_data dra_l3_flagmux_clk1 = { + .offset = 0x803500, + .l3_targ = dra_l3_target_data_clk1, + .num_targ_data = ARRAY_SIZE(dra_l3_target_data_clk1), +}; + +static struct l3_target_data dra_l3_target_data_clk2[] = { + {0x0, "HOST CLK1",}, + {0x0, "HOST CLK2",}, + {0xdead, L3_TARGET_NOT_SUPPORTED,}, + {0x3400, "SHA2_2",}, + {0x0900, "BB2D",}, + {0xdead, L3_TARGET_NOT_SUPPORTED,}, + {0x2100, "L4_PER1_P3",}, + {0x1c00, "L4_PER1_P1",}, + {0x1f00, "L4_PER1_P2",}, + {0x2300, "L4_PER2_P1",}, + {0x2400, "L4_PER2_P2",}, + {0x2600, "L4_PER3_P1",}, + {0x2700, "L4_PER3_P2",}, + {0x2f00, "MCASP1",}, + {0x3000, "MCASP2",}, + {0x3100, "MCASP3",}, + {0x2800, "MMU2",}, + {0x0f00, "OCMC_RAM1",}, + {0x1700, "OCMC_RAM2",}, + {0x1900, "OCMC_RAM3",}, + {0x1e00, "OCMC_ROM",}, + {0x3900, "QSPI",}, +}; + +static struct l3_flagmux_data dra_l3_flagmux_clk2 = { + .offset = 0x803600, + .l3_targ = dra_l3_target_data_clk2, + .num_targ_data = ARRAY_SIZE(dra_l3_target_data_clk2), +}; + +static struct l3_target_data dra_l3_target_data_clk3[] = { + {0x0100, "L3_INSTR"}, + {0x0300, "DEBUGSS_CT_TBR"}, + {0x0, "HOST CLK3"}, +}; + +static struct l3_flagmux_data dra_l3_flagmux_clk3 = { + .offset = 0x200, + .l3_targ = dra_l3_target_data_clk3, + .num_targ_data = ARRAY_SIZE(dra_l3_target_data_clk3), +}; + +static struct l3_masters_data dra_l3_masters[] = { + { 0x0, "MPU" }, + { 0x4, "CS_DAP" }, + { 0x5, "IEEE1500_2_OCP" }, + { 0x8, "DSP1_MDMA" }, + { 0x9, "DSP1_CFG" }, + { 0xA, "DSP1_DMA" }, + { 0xB, "DSP2_MDMA" }, + { 0xC, "DSP2_CFG" }, + { 0xD, "DSP2_DMA" }, + { 0xE, "IVA" }, + { 0x10, "EVE1_P1" }, + { 0x11, "EVE2_P1" }, + { 0x12, "EVE3_P1" }, + { 0x13, "EVE4_P1" }, + { 0x14, "PRUSS1 PRU1" }, + { 0x15, "PRUSS1 PRU2" }, + { 0x16, "PRUSS2 PRU1" }, + { 0x17, "PRUSS2 PRU2" }, + { 0x18, "IPU1" }, + { 0x19, "IPU2" }, + { 0x1A, "SDMA" }, + { 0x1B, "CDMA" }, + { 0x1C, "TC1_EDMA" }, + { 0x1D, "TC2_EDMA" }, + { 0x20, "DSS" }, + { 0x21, "MMU1" }, + { 0x22, "PCIE1" }, + { 0x23, "MMU2" }, + { 0x24, "VIP1" }, + { 0x25, "VIP2" }, + { 0x26, "VIP3" }, + { 0x27, "VPE" }, + { 0x28, "GPU_P1" }, + { 0x29, "BB2D" }, + { 0x29, "GPU_P2" }, + { 0x2B, "GMAC_SW" }, + { 0x2C, "USB3" }, + { 0x2D, "USB2_SS" }, + { 0x2E, "USB2_ULPI_SS1" }, + { 0x2F, "USB2_ULPI_SS2" }, + { 0x30, "CSI2_1" }, + { 0x31, "CSI2_2" }, + { 0x33, "SATA" }, + { 0x34, "EVE1_P2" }, + { 0x35, "EVE2_P2" }, + { 0x36, "EVE3_P2" }, + { 0x37, "EVE4_P2" } +}; + +static struct l3_flagmux_data *dra_l3_flagmux[] = { + &dra_l3_flagmux_clk1, + &dra_l3_flagmux_clk2, + &dra_l3_flagmux_clk3, +}; + +static const struct omap_l3 dra_l3_data = { + .l3_base = { [1] = L3_BASE_IS_SUBMODULE }, + .l3_flagmux = dra_l3_flagmux, + .num_modules = ARRAY_SIZE(dra_l3_flagmux), + .l3_masters = dra_l3_masters, + .num_masters = ARRAY_SIZE(dra_l3_masters), + /* The 6 MSBs of register field used to distinguish initiator */ + .mst_addr_mask = 0xFC, +}; + +/* AM4372 data */ +static struct l3_target_data am4372_l3_target_data_200f[] = { + {0xf00, "EMIF",}, + {0x1200, "DES",}, + {0x400, "OCMCRAM",}, + {0x700, "TPTC0",}, + {0x800, "TPTC1",}, + {0x900, "TPTC2"}, + {0xb00, "TPCC",}, + {0xd00, "DEBUGSS",}, + {0xdead, L3_TARGET_NOT_SUPPORTED,}, + {0x200, "SHA",}, + {0xc00, "SGX530",}, + {0x500, "AES0",}, + {0xa00, "L4_FAST",}, + {0x300, "MPUSS_L2_RAM",}, + {0x100, "ICSS",}, +}; + +static struct l3_flagmux_data am4372_l3_flagmux_200f = { + .offset = 0x1000, + .l3_targ = am4372_l3_target_data_200f, + .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_200f), +}; + +static struct l3_target_data am4372_l3_target_data_100s[] = { + {0x100, "L4_PER_0",}, + {0x200, "L4_PER_1",}, + {0x300, "L4_PER_2",}, + {0x400, "L4_PER_3",}, + {0x800, "McASP0",}, + {0x900, "McASP1",}, + {0xC00, "MMCHS2",}, + {0x700, "GPMC",}, + {0xD00, "L4_FW",}, + {0xdead, L3_TARGET_NOT_SUPPORTED,}, + {0x500, "ADCTSC",}, + {0xE00, "L4_WKUP",}, + {0xA00, "MAG_CARD",}, +}; + +static struct l3_flagmux_data am4372_l3_flagmux_100s = { + .offset = 0x600, + .l3_targ = am4372_l3_target_data_100s, + .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_100s), +}; + +static struct l3_masters_data am4372_l3_masters[] = { + { 0x0, "M1 (128-bit)"}, + { 0x1, "M2 (64-bit)"}, + { 0x4, "DAP"}, + { 0x5, "P1500"}, + { 0xC, "ICSS0"}, + { 0xD, "ICSS1"}, + { 0x14, "Wakeup Processor"}, + { 0x18, "TPTC0 Read"}, + { 0x19, "TPTC0 Write"}, + { 0x1A, "TPTC1 Read"}, + { 0x1B, "TPTC1 Write"}, + { 0x1C, "TPTC2 Read"}, + { 0x1D, "TPTC2 Write"}, + { 0x20, "SGX530"}, + { 0x21, "OCP WP Traffic Probe"}, + { 0x22, "OCP WP DMA Profiling"}, + { 0x23, "OCP WP Event Trace"}, + { 0x25, "DSS"}, + { 0x28, "Crypto DMA RD"}, + { 0x29, "Crypto DMA WR"}, + { 0x2C, "VPFE0"}, + { 0x2D, "VPFE1"}, + { 0x30, "GEMAC"}, + { 0x34, "USB0 RD"}, + { 0x35, "USB0 WR"}, + { 0x36, "USB1 RD"}, + { 0x37, "USB1 WR"}, +}; + +static struct l3_flagmux_data *am4372_l3_flagmux[] = { + &am4372_l3_flagmux_200f, + &am4372_l3_flagmux_100s, +}; + +static const struct omap_l3 am4372_l3_data = { + .l3_flagmux = am4372_l3_flagmux, + .num_modules = ARRAY_SIZE(am4372_l3_flagmux), + .l3_masters = am4372_l3_masters, + .num_masters = ARRAY_SIZE(am4372_l3_masters), + /* All 6 bits of register field used to distinguish initiator */ + .mst_addr_mask = 0x3F, +}; + +#endif /* __OMAP_L3_NOC_H */ diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 870e18b9a687..1fad4c5e3f5d 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -24,6 +24,8 @@ #define APLL_CON0 0x100 #define SRC_CPU 0x200 #define DIV_CPU0 0x500 +#define PWR_CTRL1 0x1020 +#define PWR_CTRL2 0x1024 #define MPLL_LOCK 0x4000 #define MPLL_CON0 0x4100 #define SRC_CORE1 0x4204 @@ -84,6 +86,23 @@ #define SRC_CDREX 0x20200 #define PLL_DIV2_SEL 0x20a24 +/*Below definitions are used for PWR_CTRL settings*/ +#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) +#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) +#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) +#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) +#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) +#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) +#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) +#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) + +#define PWR_CTRL2_DIV2_UP_EN (1 << 25) +#define PWR_CTRL2_DIV1_UP_EN (1 << 24) +#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) +#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) +#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) +#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) + /* list of PLLs to be registered */ enum exynos5250_plls { apll, mpll, cpll, epll, vpll, gpll, bpll, @@ -102,6 +121,8 @@ static struct samsung_clk_reg_dump *exynos5250_save; static unsigned long exynos5250_clk_regs[] __initdata = { SRC_CPU, DIV_CPU0, + PWR_CTRL1, + PWR_CTRL2, SRC_CORE1, SRC_TOP0, SRC_TOP1, @@ -736,6 +757,7 @@ static struct of_device_id ext_clk_match[] __initdata = { static void __init exynos5250_clk_init(struct device_node *np) { struct samsung_clk_provider *ctx; + unsigned int tmp; if (np) { reg_base = of_iomap(np, 0); @@ -776,6 +798,26 @@ static void __init exynos5250_clk_init(struct device_node *np) samsung_clk_register_gate(ctx, exynos5250_gate_clks, ARRAY_SIZE(exynos5250_gate_clks)); + /* + * Enable arm clock down (in idle) and set arm divider + * ratios in WFI/WFE state. + */ + tmp = (PWR_CTRL1_CORE2_DOWN_RATIO | PWR_CTRL1_CORE1_DOWN_RATIO | + PWR_CTRL1_DIV2_DOWN_EN | PWR_CTRL1_DIV1_DOWN_EN | + PWR_CTRL1_USE_CORE1_WFE | PWR_CTRL1_USE_CORE0_WFE | + PWR_CTRL1_USE_CORE1_WFI | PWR_CTRL1_USE_CORE0_WFI); + __raw_writel(tmp, reg_base + PWR_CTRL1); + + /* + * Enable arm clock up (on exiting idle). Set arm divider + * ratios when not in idle along with the standby duration + * ratios. + */ + tmp = (PWR_CTRL2_DIV2_UP_EN | PWR_CTRL2_DIV1_UP_EN | + PWR_CTRL2_DUR_STANDBY2_VAL | PWR_CTRL2_DUR_STANDBY1_VAL | + PWR_CTRL2_CORE2_UP_RATIO | PWR_CTRL2_CORE1_UP_RATIO); + __raw_writel(tmp, reg_base + PWR_CTRL2); + exynos5250_clk_sleep_init(); pr_info("Exynos5250: clock setup completed, armclk=%ld\n", diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index acf5a329d538..8d6420013a04 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -24,6 +24,7 @@ #include #include #include +#include #define EXYNOS4_MCTREG(x) (x) #define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) @@ -192,12 +193,19 @@ struct clocksource mct_frc = { .resume = exynos4_frc_resume, }; +static u64 notrace exynos4_read_sched_clock(void) +{ + return exynos4_frc_read(&mct_frc); +} + static void __init exynos4_clocksource_init(void) { exynos4_mct_frc_start(0, 0); if (clocksource_register_hz(&mct_frc, clk_rate)) panic("%s: can't register clocksource\n", mct_frc.name); + + sched_clock_register(exynos4_read_sched_clock, 64, clk_rate); } static void exynos4_mct_comp0_stop(void) diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 580503513f0f..d2c7b4b8ffd5 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -30,7 +30,7 @@ config ARM_EXYNOS_CPUFREQ config ARM_EXYNOS4210_CPUFREQ bool "SAMSUNG EXYNOS4210" - depends on CPU_EXYNOS4210 && !ARCH_MULTIPLATFORM + depends on CPU_EXYNOS4210 default y select ARM_EXYNOS_CPUFREQ help @@ -41,7 +41,7 @@ config ARM_EXYNOS4210_CPUFREQ config ARM_EXYNOS4X12_CPUFREQ bool "SAMSUNG EXYNOS4x12" - depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM + depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 default y select ARM_EXYNOS_CPUFREQ help @@ -52,7 +52,7 @@ config ARM_EXYNOS4X12_CPUFREQ config ARM_EXYNOS5250_CPUFREQ bool "SAMSUNG EXYNOS5250" - depends on SOC_EXYNOS5250 && !ARCH_MULTIPLATFORM + depends on SOC_EXYNOS5250 default y select ARM_EXYNOS_CPUFREQ help diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index e8a4a7ed38c1..348c8bafe436 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -19,8 +19,6 @@ #include #include -#include - #include "exynos-cpufreq.h" static struct exynos_dvfs_info *exynos_info; diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h index f189547bb447..51af42e1b7fe 100644 --- a/drivers/cpufreq/exynos-cpufreq.h +++ b/drivers/cpufreq/exynos-cpufreq.h @@ -49,6 +49,7 @@ struct exynos_dvfs_info { struct cpufreq_frequency_table *freq_table; void (*set_freq)(unsigned int, unsigned int); bool (*need_apll_change)(unsigned int, unsigned int); + void __iomem *cmu_regs; }; #ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ @@ -76,24 +77,21 @@ static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) } #endif -#include -#include +#define EXYNOS4_CLKSRC_CPU 0x14200 +#define EXYNOS4_CLKMUX_STATCPU 0x14400 -#define EXYNOS4_CLKSRC_CPU (S5P_VA_CMU + 0x14200) -#define EXYNOS4_CLKMUX_STATCPU (S5P_VA_CMU + 0x14400) - -#define EXYNOS4_CLKDIV_CPU (S5P_VA_CMU + 0x14500) -#define EXYNOS4_CLKDIV_CPU1 (S5P_VA_CMU + 0x14504) -#define EXYNOS4_CLKDIV_STATCPU (S5P_VA_CMU + 0x14600) -#define EXYNOS4_CLKDIV_STATCPU1 (S5P_VA_CMU + 0x14604) +#define EXYNOS4_CLKDIV_CPU 0x14500 +#define EXYNOS4_CLKDIV_CPU1 0x14504 +#define EXYNOS4_CLKDIV_STATCPU 0x14600 +#define EXYNOS4_CLKDIV_STATCPU1 0x14604 #define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16) #define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) -#define EXYNOS5_APLL_LOCK (S5P_VA_CMU + 0x00000) -#define EXYNOS5_APLL_CON0 (S5P_VA_CMU + 0x00100) -#define EXYNOS5_CLKMUX_STATCPU (S5P_VA_CMU + 0x00400) -#define EXYNOS5_CLKDIV_CPU0 (S5P_VA_CMU + 0x00500) -#define EXYNOS5_CLKDIV_CPU1 (S5P_VA_CMU + 0x00504) -#define EXYNOS5_CLKDIV_STATCPU0 (S5P_VA_CMU + 0x00600) -#define EXYNOS5_CLKDIV_STATCPU1 (S5P_VA_CMU + 0x00604) +#define EXYNOS5_APLL_LOCK 0x00000 +#define EXYNOS5_APLL_CON0 0x00100 +#define EXYNOS5_CLKMUX_STATCPU 0x00400 +#define EXYNOS5_CLKDIV_CPU0 0x00500 +#define EXYNOS5_CLKDIV_CPU1 0x00504 +#define EXYNOS5_CLKDIV_STATCPU0 0x00600 +#define EXYNOS5_CLKDIV_STATCPU1 0x00604 diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index 6384e5b9a347..61a54310a1b9 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include "exynos-cpufreq.h" @@ -23,6 +25,7 @@ static struct clk *cpu_clk; static struct clk *moutcore; static struct clk *mout_mpll; static struct clk *mout_apll; +static struct exynos_dvfs_info *cpufreq; static unsigned int exynos4210_volt_table[] = { 1250000, 1150000, 1050000, 975000, 950000, @@ -60,20 +63,20 @@ static void exynos4210_set_clkdiv(unsigned int div_index) tmp = apll_freq_4210[div_index].clk_div_cpu0; - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU); + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU); } while (tmp & 0x1111111); /* Change Divider - CPU1 */ tmp = apll_freq_4210[div_index].clk_div_cpu1; - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1); + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); } while (tmp & 0x11); } @@ -85,7 +88,7 @@ static void exynos4210_set_apll(unsigned int index) clk_set_parent(moutcore, mout_mpll); do { - tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU) + tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); tmp &= 0x7; } while (tmp != 0x2); @@ -96,7 +99,7 @@ static void exynos4210_set_apll(unsigned int index) clk_set_parent(moutcore, mout_apll); do { - tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); } @@ -115,8 +118,30 @@ static void exynos4210_set_frequency(unsigned int old_index, int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) { + struct device_node *np; unsigned long rate; + /* + * HACK: This is a temporary workaround to get access to clock + * controller registers directly and remove static mappings and + * dependencies on platform headers. It is necessary to enable + * Exynos multi-platform support and will be removed together with + * this whole driver as soon as Exynos gets migrated to use + * cpufreq-cpu0 driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + info->cmu_regs = of_iomap(np, 0); + if (!info->cmu_regs) { + pr_err("%s: failed to map CMU registers\n", __func__); + return -EFAULT; + } + cpu_clk = clk_get(NULL, "armclk"); if (IS_ERR(cpu_clk)) return PTR_ERR(cpu_clk); @@ -143,6 +168,8 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) info->freq_table = exynos4210_freq_table; info->set_freq = exynos4210_set_frequency; + cpufreq = info; + return 0; err_mout_apll: diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 63a3907ce578..351a2074cfea 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include "exynos-cpufreq.h" @@ -23,6 +25,7 @@ static struct clk *cpu_clk; static struct clk *moutcore; static struct clk *mout_mpll; static struct clk *mout_apll; +static struct exynos_dvfs_info *cpufreq; static unsigned int exynos4x12_volt_table[] = { 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500, @@ -105,19 +108,20 @@ static void exynos4x12_set_clkdiv(unsigned int div_index) tmp = apll_freq_4x12[div_index].clk_div_cpu0; - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU); + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); - while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111) + while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU) + & 0x11111111) cpu_relax(); /* Change Divider - CPU1 */ tmp = apll_freq_4x12[div_index].clk_div_cpu1; - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1); + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); do { cpu_relax(); - tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); } while (tmp != 0x0); } @@ -130,7 +134,7 @@ static void exynos4x12_set_apll(unsigned int index) do { cpu_relax(); - tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU) + tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); tmp &= 0x7; } while (tmp != 0x2); @@ -142,7 +146,7 @@ static void exynos4x12_set_apll(unsigned int index) do { cpu_relax(); - tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); } @@ -161,8 +165,30 @@ static void exynos4x12_set_frequency(unsigned int old_index, int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) { + struct device_node *np; unsigned long rate; + /* + * HACK: This is a temporary workaround to get access to clock + * controller registers directly and remove static mappings and + * dependencies on platform headers. It is necessary to enable + * Exynos multi-platform support and will be removed together with + * this whole driver as soon as Exynos gets migrated to use + * cpufreq-cpu0 driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + info->cmu_regs = of_iomap(np, 0); + if (!info->cmu_regs) { + pr_err("%s: failed to map CMU registers\n", __func__); + return -EFAULT; + } + cpu_clk = clk_get(NULL, "armclk"); if (IS_ERR(cpu_clk)) return PTR_ERR(cpu_clk); @@ -194,6 +220,8 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) info->freq_table = exynos4x12_freq_table; info->set_freq = exynos4x12_set_frequency; + cpufreq = info; + return 0; err_mout_apll: diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c index 363a0b3fe1b1..c91ce69dc631 100644 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ b/drivers/cpufreq/exynos5250-cpufreq.c @@ -16,8 +16,8 @@ #include #include #include - -#include +#include +#include #include "exynos-cpufreq.h" @@ -25,6 +25,7 @@ static struct clk *cpu_clk; static struct clk *moutcore; static struct clk *mout_mpll; static struct clk *mout_apll; +static struct exynos_dvfs_info *cpufreq; static unsigned int exynos5250_volt_table[] = { 1300000, 1250000, 1225000, 1200000, 1150000, @@ -87,17 +88,18 @@ static void set_clkdiv(unsigned int div_index) tmp = apll_freq_5250[div_index].clk_div_cpu0; - __raw_writel(tmp, EXYNOS5_CLKDIV_CPU0); + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0); - while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111) + while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0) + & 0x11111111) cpu_relax(); /* Change Divider - CPU1 */ tmp = apll_freq_5250[div_index].clk_div_cpu1; - __raw_writel(tmp, EXYNOS5_CLKDIV_CPU1); + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1); - while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11) + while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11) cpu_relax(); } @@ -111,7 +113,8 @@ static void set_apll(unsigned int index) do { cpu_relax(); - tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16); + tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU) + >> 16); tmp &= 0x7; } while (tmp != 0x2); @@ -122,7 +125,7 @@ static void set_apll(unsigned int index) do { cpu_relax(); - tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU); + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU); tmp &= (0x7 << 16); } while (tmp != (0x1 << 16)); } @@ -141,8 +144,30 @@ static void exynos5250_set_frequency(unsigned int old_index, int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) { + struct device_node *np; unsigned long rate; + /* + * HACK: This is a temporary workaround to get access to clock + * controller registers directly and remove static mappings and + * dependencies on platform headers. It is necessary to enable + * Exynos multi-platform support and will be removed together with + * this whole driver as soon as Exynos gets migrated to use + * cpufreq-cpu0 driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + info->cmu_regs = of_iomap(np, 0); + if (!info->cmu_regs) { + pr_err("%s: failed to map CMU registers\n", __func__); + return -EFAULT; + } + cpu_clk = clk_get(NULL, "armclk"); if (IS_ERR(cpu_clk)) return PTR_ERR(cpu_clk); @@ -169,6 +194,8 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) info->freq_table = exynos5250_freq_table; info->set_freq = exynos5250_set_frequency; + cpufreq = info; + return 0; err_mout_apll: diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm index 5bb94780d377..ae1d78ea7df7 100644 --- a/drivers/cpuidle/Kconfig.arm +++ b/drivers/cpuidle/Kconfig.arm @@ -49,3 +49,9 @@ config ARM_AT91_CPUIDLE depends on ARCH_AT91 help Select this to enable cpuidle for AT91 processors + +config ARM_EXYNOS_CPUIDLE + bool "Cpu Idle Driver for the Exynos processors" + depends on ARCH_EXYNOS + help + Select this to enable cpuidle for Exynos processors diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 9902d052bd87..cd3ab59f8461 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o obj-$(CONFIG_ARM_AT91_CPUIDLE) += cpuidle-at91.o +obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o ############################################################################### # POWERPC drivers diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c new file mode 100644 index 000000000000..7c0151263828 --- /dev/null +++ b/drivers/cpuidle/cpuidle-exynos.c @@ -0,0 +1,99 @@ +/* linux/arch/arm/mach-exynos/cpuidle.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include +#include +#include + +static void (*exynos_enter_aftr)(void); + +static int idle_finisher(unsigned long flags) +{ + exynos_enter_aftr(); + cpu_do_idle(); + + return 1; +} + +static int exynos_enter_core0_aftr(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + cpu_pm_enter(); + cpu_suspend(0, idle_finisher); + cpu_pm_exit(); + + return index; +} + +static int exynos_enter_lowpower(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + int new_index = index; + + /* AFTR can only be entered when cores other than CPU0 are offline */ + if (num_online_cpus() > 1 || dev->cpu != 0) + new_index = drv->safe_state_index; + + if (new_index == 0) + return arm_cpuidle_simple_enter(dev, drv, new_index); + else + return exynos_enter_core0_aftr(dev, drv, new_index); +} + +static struct cpuidle_driver exynos_idle_driver = { + .name = "exynos_idle", + .owner = THIS_MODULE, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE, + [1] = { + .enter = exynos_enter_lowpower, + .exit_latency = 300, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C1", + .desc = "ARM power down", + }, + }, + .state_count = 2, + .safe_state_index = 0, +}; + +static int exynos_cpuidle_probe(struct platform_device *pdev) +{ + int ret; + + exynos_enter_aftr = (void *)(pdev->dev.platform_data); + + ret = cpuidle_register(&exynos_idle_driver, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register cpuidle driver\n"); + return ret; + } + + return 0; +} + +static struct platform_driver exynos_cpuidle_driver = { + .probe = exynos_cpuidle_probe, + .driver = { + .name = "exynos_cpuidle", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(exynos_cpuidle_driver); diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 926360c2db6a..d08c4dedef35 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -57,14 +57,48 @@ #define EDMA_MAX_SLOTS MAX_NR_SG #define EDMA_DESCRIPTORS 16 +struct edma_pset { + u32 len; + dma_addr_t addr; + struct edmacc_param param; +}; + struct edma_desc { struct virt_dma_desc vdesc; struct list_head node; + enum dma_transfer_direction direction; int cyclic; int absync; int pset_nr; + struct edma_chan *echan; int processed; - struct edmacc_param pset[0]; + + /* + * The following 4 elements are used for residue accounting. + * + * - processed_stat: the number of SG elements we have traversed + * so far to cover accounting. This is updated directly to processed + * during edma_callback and is always <= processed, because processed + * refers to the number of pending transfer (programmed to EDMA + * controller), where as processed_stat tracks number of transfers + * accounted for so far. + * + * - residue: The amount of bytes we have left to transfer for this desc + * + * - residue_stat: The residue in bytes of data we have covered + * so far for accounting. This is updated directly to residue + * during callbacks to keep it current. + * + * - sg_len: Tracks the length of the current intermediate transfer, + * this is required to update the residue during intermediate transfer + * completion callback. + */ + int processed_stat; + u32 sg_len; + u32 residue; + u32 residue_stat; + + struct edma_pset pset[0]; }; struct edma_cc; @@ -136,12 +170,14 @@ static void edma_execute(struct edma_chan *echan) /* Find out how many left */ left = edesc->pset_nr - edesc->processed; nslots = min(MAX_NR_SG, left); + edesc->sg_len = 0; /* Write descriptor PaRAM set(s) */ for (i = 0; i < nslots; i++) { j = i + edesc->processed; - edma_write_slot(echan->slot[i], &edesc->pset[j]); - dev_dbg(echan->vchan.chan.device->dev, + edma_write_slot(echan->slot[i], &edesc->pset[j].param); + edesc->sg_len += edesc->pset[j].len; + dev_vdbg(echan->vchan.chan.device->dev, "\n pset[%d]:\n" " chnum\t%d\n" " slot\t%d\n" @@ -154,14 +190,14 @@ static void edma_execute(struct edma_chan *echan) " cidx\t%08x\n" " lkrld\t%08x\n", j, echan->ch_num, echan->slot[i], - edesc->pset[j].opt, - edesc->pset[j].src, - edesc->pset[j].dst, - edesc->pset[j].a_b_cnt, - edesc->pset[j].ccnt, - edesc->pset[j].src_dst_bidx, - edesc->pset[j].src_dst_cidx, - edesc->pset[j].link_bcntrld); + edesc->pset[j].param.opt, + edesc->pset[j].param.src, + edesc->pset[j].param.dst, + edesc->pset[j].param.a_b_cnt, + edesc->pset[j].param.ccnt, + edesc->pset[j].param.src_dst_bidx, + edesc->pset[j].param.src_dst_cidx, + edesc->pset[j].param.link_bcntrld); /* Link to the previous slot if not the last set */ if (i != (nslots - 1)) edma_link(echan->slot[i], echan->slot[i+1]); @@ -183,7 +219,8 @@ static void edma_execute(struct edma_chan *echan) } if (edesc->processed <= MAX_NR_SG) { - dev_dbg(dev, "first transfer starting %d\n", echan->ch_num); + dev_dbg(dev, "first transfer starting on channel %d\n", + echan->ch_num); edma_start(echan->ch_num); } else { dev_dbg(dev, "chan: %d: completed %d elements, resuming\n", @@ -197,7 +234,7 @@ static void edma_execute(struct edma_chan *echan) * MAX_NR_SG */ if (echan->missed) { - dev_dbg(dev, "missed event in execute detected\n"); + dev_dbg(dev, "missed event on channel %d\n", echan->ch_num); edma_clean_channel(echan->ch_num); edma_stop(echan->ch_num); edma_start(echan->ch_num); @@ -242,6 +279,26 @@ static int edma_slave_config(struct edma_chan *echan, return 0; } +static int edma_dma_pause(struct edma_chan *echan) +{ + /* Pause/Resume only allowed with cyclic mode */ + if (!echan->edesc->cyclic) + return -EINVAL; + + edma_pause(echan->ch_num); + return 0; +} + +static int edma_dma_resume(struct edma_chan *echan) +{ + /* Pause/Resume only allowed with cyclic mode */ + if (!echan->edesc->cyclic) + return -EINVAL; + + edma_resume(echan->ch_num); + return 0; +} + static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { @@ -257,6 +314,14 @@ static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, config = (struct dma_slave_config *)arg; ret = edma_slave_config(echan, config); break; + case DMA_PAUSE: + ret = edma_dma_pause(echan); + break; + + case DMA_RESUME: + ret = edma_dma_resume(echan); + break; + default: ret = -ENOSYS; } @@ -275,18 +340,23 @@ static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * @dma_length: Total length of the DMA transfer * @direction: Direction of the transfer */ -static int edma_config_pset(struct dma_chan *chan, struct edmacc_param *pset, +static int edma_config_pset(struct dma_chan *chan, struct edma_pset *epset, dma_addr_t src_addr, dma_addr_t dst_addr, u32 burst, enum dma_slave_buswidth dev_width, unsigned int dma_length, enum dma_transfer_direction direction) { struct edma_chan *echan = to_edma_chan(chan); struct device *dev = chan->device->dev; + struct edmacc_param *param = &epset->param; int acnt, bcnt, ccnt, cidx; int src_bidx, dst_bidx, src_cidx, dst_cidx; int absync; acnt = dev_width; + + /* src/dst_maxburst == 0 is the same case as src/dst_maxburst == 1 */ + if (!burst) + burst = 1; /* * If the maxburst is equal to the fifo width, use * A-synced transfers. This allows for large contiguous @@ -337,41 +407,50 @@ static int edma_config_pset(struct dma_chan *chan, struct edmacc_param *pset, cidx = acnt * bcnt; } + epset->len = dma_length; + if (direction == DMA_MEM_TO_DEV) { src_bidx = acnt; src_cidx = cidx; dst_bidx = 0; dst_cidx = 0; + epset->addr = src_addr; } else if (direction == DMA_DEV_TO_MEM) { src_bidx = 0; src_cidx = 0; dst_bidx = acnt; dst_cidx = cidx; + epset->addr = dst_addr; + } else if (direction == DMA_MEM_TO_MEM) { + src_bidx = acnt; + src_cidx = cidx; + dst_bidx = acnt; + dst_cidx = cidx; } else { dev_err(dev, "%s: direction not implemented yet\n", __func__); return -EINVAL; } - pset->opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num)); + param->opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num)); /* Configure A or AB synchronized transfers */ if (absync) - pset->opt |= SYNCDIM; + param->opt |= SYNCDIM; - pset->src = src_addr; - pset->dst = dst_addr; + param->src = src_addr; + param->dst = dst_addr; - pset->src_dst_bidx = (dst_bidx << 16) | src_bidx; - pset->src_dst_cidx = (dst_cidx << 16) | src_cidx; + param->src_dst_bidx = (dst_bidx << 16) | src_bidx; + param->src_dst_cidx = (dst_cidx << 16) | src_cidx; - pset->a_b_cnt = bcnt << 16 | acnt; - pset->ccnt = ccnt; + param->a_b_cnt = bcnt << 16 | acnt; + param->ccnt = ccnt; /* * Only time when (bcntrld) auto reload is required is for * A-sync case, and in this case, a requirement of reload value * of SZ_64K-1 only is assured. 'link' is initially set to NULL * and then later will be populated by edma_execute. */ - pset->link_bcntrld = 0xffffffff; + param->link_bcntrld = 0xffffffff; return absync; } @@ -401,23 +480,26 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( dev_width = echan->cfg.dst_addr_width; burst = echan->cfg.dst_maxburst; } else { - dev_err(dev, "%s: bad direction?\n", __func__); + dev_err(dev, "%s: bad direction: %d\n", __func__, direction); return NULL; } if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) { - dev_err(dev, "Undefined slave buswidth\n"); + dev_err(dev, "%s: Undefined slave buswidth\n", __func__); return NULL; } edesc = kzalloc(sizeof(*edesc) + sg_len * sizeof(edesc->pset[0]), GFP_ATOMIC); if (!edesc) { - dev_dbg(dev, "Failed to allocate a descriptor\n"); + dev_err(dev, "%s: Failed to allocate a descriptor\n", __func__); return NULL; } edesc->pset_nr = sg_len; + edesc->residue = 0; + edesc->direction = direction; + edesc->echan = echan; /* Allocate a PaRAM slot, if needed */ nslots = min_t(unsigned, MAX_NR_SG, sg_len); @@ -429,7 +511,8 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( EDMA_SLOT_ANY); if (echan->slot[i] < 0) { kfree(edesc); - dev_err(dev, "Failed to allocate slot\n"); + dev_err(dev, "%s: Failed to allocate slot\n", + __func__); return NULL; } } @@ -452,16 +535,56 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( } edesc->absync = ret; + edesc->residue += sg_dma_len(sg); /* If this is the last in a current SG set of transactions, enable interrupts so that next set is processed */ if (!((i+1) % MAX_NR_SG)) - edesc->pset[i].opt |= TCINTEN; + edesc->pset[i].param.opt |= TCINTEN; /* If this is the last set, enable completion interrupt flag */ if (i == sg_len - 1) - edesc->pset[i].opt |= TCINTEN; + edesc->pset[i].param.opt |= TCINTEN; } + edesc->residue_stat = edesc->residue; + + return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags); +} + +struct dma_async_tx_descriptor *edma_prep_dma_memcpy( + struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, + size_t len, unsigned long tx_flags) +{ + int ret; + struct edma_desc *edesc; + struct device *dev = chan->device->dev; + struct edma_chan *echan = to_edma_chan(chan); + + if (unlikely(!echan || !len)) + return NULL; + + edesc = kzalloc(sizeof(*edesc) + sizeof(edesc->pset[0]), GFP_ATOMIC); + if (!edesc) { + dev_dbg(dev, "Failed to allocate a descriptor\n"); + return NULL; + } + + edesc->pset_nr = 1; + + ret = edma_config_pset(chan, &edesc->pset[0], src, dest, 1, + DMA_SLAVE_BUSWIDTH_4_BYTES, len, DMA_MEM_TO_MEM); + if (ret < 0) + return NULL; + + edesc->absync = ret; + + /* + * Enable intermediate transfer chaining to re-trigger channel + * on completion of every TR, and enable transfer-completion + * interrupt on completion of the whole transfer. + */ + edesc->pset[0].param.opt |= ITCCHEN; + edesc->pset[0].param.opt |= TCINTEN; return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags); } @@ -493,12 +616,12 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( dev_width = echan->cfg.dst_addr_width; burst = echan->cfg.dst_maxburst; } else { - dev_err(dev, "%s: bad direction?\n", __func__); + dev_err(dev, "%s: bad direction: %d\n", __func__, direction); return NULL; } if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) { - dev_err(dev, "Undefined slave buswidth\n"); + dev_err(dev, "%s: Undefined slave buswidth\n", __func__); return NULL; } @@ -523,16 +646,18 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]), GFP_ATOMIC); if (!edesc) { - dev_dbg(dev, "Failed to allocate a descriptor\n"); + dev_err(dev, "%s: Failed to allocate a descriptor\n", __func__); return NULL; } edesc->cyclic = 1; edesc->pset_nr = nslots; + edesc->residue = edesc->residue_stat = buf_len; + edesc->direction = direction; + edesc->echan = echan; - dev_dbg(dev, "%s: nslots=%d\n", __func__, nslots); - dev_dbg(dev, "%s: period_len=%d\n", __func__, period_len); - dev_dbg(dev, "%s: buf_len=%d\n", __func__, buf_len); + dev_dbg(dev, "%s: channel=%d nslots=%d period_len=%zu buf_len=%zu\n", + __func__, echan->ch_num, nslots, period_len, buf_len); for (i = 0; i < nslots; i++) { /* Allocate a PaRAM slot, if needed */ @@ -542,7 +667,8 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( EDMA_SLOT_ANY); if (echan->slot[i] < 0) { kfree(edesc); - dev_err(dev, "Failed to allocate slot\n"); + dev_err(dev, "%s: Failed to allocate slot\n", + __func__); return NULL; } } @@ -566,8 +692,8 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( else src_addr += period_len; - dev_dbg(dev, "%s: Configure period %d of buf:\n", __func__, i); - dev_dbg(dev, + dev_vdbg(dev, "%s: Configure period %d of buf:\n", __func__, i); + dev_vdbg(dev, "\n pset[%d]:\n" " chnum\t%d\n" " slot\t%d\n" @@ -580,14 +706,14 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( " cidx\t%08x\n" " lkrld\t%08x\n", i, echan->ch_num, echan->slot[i], - edesc->pset[i].opt, - edesc->pset[i].src, - edesc->pset[i].dst, - edesc->pset[i].a_b_cnt, - edesc->pset[i].ccnt, - edesc->pset[i].src_dst_bidx, - edesc->pset[i].src_dst_cidx, - edesc->pset[i].link_bcntrld); + edesc->pset[i].param.opt, + edesc->pset[i].param.src, + edesc->pset[i].param.dst, + edesc->pset[i].param.a_b_cnt, + edesc->pset[i].param.ccnt, + edesc->pset[i].param.src_dst_bidx, + edesc->pset[i].param.src_dst_cidx, + edesc->pset[i].param.link_bcntrld); edesc->absync = ret; @@ -595,7 +721,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( * Enable interrupts for every period because callback * has to be called for every period. */ - edesc->pset[i].opt |= TCINTEN; + edesc->pset[i].param.opt |= TCINTEN; } return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags); @@ -606,7 +732,6 @@ static void edma_callback(unsigned ch_num, u16 ch_status, void *data) struct edma_chan *echan = data; struct device *dev = echan->vchan.chan.device->dev; struct edma_desc *edesc; - unsigned long flags; struct edmacc_param p; edesc = echan->edesc; @@ -617,27 +742,34 @@ static void edma_callback(unsigned ch_num, u16 ch_status, void *data) switch (ch_status) { case EDMA_DMA_COMPLETE: - spin_lock_irqsave(&echan->vchan.lock, flags); + spin_lock(&echan->vchan.lock); if (edesc) { if (edesc->cyclic) { vchan_cyclic_callback(&edesc->vdesc); } else if (edesc->processed == edesc->pset_nr) { dev_dbg(dev, "Transfer complete, stopping channel %d\n", ch_num); + edesc->residue = 0; edma_stop(echan->ch_num); vchan_cookie_complete(&edesc->vdesc); edma_execute(echan); } else { dev_dbg(dev, "Intermediate transfer complete on channel %d\n", ch_num); + + /* Update statistics for tx_status */ + edesc->residue -= edesc->sg_len; + edesc->residue_stat = edesc->residue; + edesc->processed_stat = edesc->processed; + edma_execute(echan); } } - spin_unlock_irqrestore(&echan->vchan.lock, flags); + spin_unlock(&echan->vchan.lock); break; case EDMA_DMA_CC_ERROR: - spin_lock_irqsave(&echan->vchan.lock, flags); + spin_lock(&echan->vchan.lock); edma_read_slot(EDMA_CHAN_SLOT(echan->slot[0]), &p); @@ -668,7 +800,7 @@ static void edma_callback(unsigned ch_num, u16 ch_status, void *data) edma_trigger_channel(echan->ch_num); } - spin_unlock_irqrestore(&echan->vchan.lock, flags); + spin_unlock(&echan->vchan.lock); break; default: @@ -704,7 +836,7 @@ static int edma_alloc_chan_resources(struct dma_chan *chan) echan->alloced = true; echan->slot[0] = echan->ch_num; - dev_dbg(dev, "allocated channel for %u:%u\n", + dev_dbg(dev, "allocated channel %d for %u:%u\n", echan->ch_num, EDMA_CTLR(echan->ch_num), EDMA_CHAN_SLOT(echan->ch_num)); return 0; @@ -756,23 +888,52 @@ static void edma_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&echan->vchan.lock, flags); } -static size_t edma_desc_size(struct edma_desc *edesc) +static u32 edma_residue(struct edma_desc *edesc) { + bool dst = edesc->direction == DMA_DEV_TO_MEM; + struct edma_pset *pset = edesc->pset; + dma_addr_t done, pos; int i; - size_t size; - if (edesc->absync) - for (size = i = 0; i < edesc->pset_nr; i++) - size += (edesc->pset[i].a_b_cnt & 0xffff) * - (edesc->pset[i].a_b_cnt >> 16) * - edesc->pset[i].ccnt; - else - size = (edesc->pset[0].a_b_cnt & 0xffff) * - (edesc->pset[0].a_b_cnt >> 16) + - (edesc->pset[0].a_b_cnt & 0xffff) * - (SZ_64K - 1) * edesc->pset[0].ccnt; + /* + * We always read the dst/src position from the first RamPar + * pset. That's the one which is active now. + */ + pos = edma_get_position(edesc->echan->slot[0], dst); - return size; + /* + * Cyclic is simple. Just subtract pset[0].addr from pos. + * + * We never update edesc->residue in the cyclic case, so we + * can tell the remaining room to the end of the circular + * buffer. + */ + if (edesc->cyclic) { + done = pos - pset->addr; + edesc->residue_stat = edesc->residue - done; + return edesc->residue_stat; + } + + /* + * For SG operation we catch up with the last processed + * status. + */ + pset += edesc->processed_stat; + + for (i = edesc->processed_stat; i < edesc->processed; i++, pset++) { + /* + * If we are inside this pset address range, we know + * this is the active one. Get the current delta and + * stop walking the psets. + */ + if (pos >= pset->addr && pos < pset->addr + pset->len) + return edesc->residue_stat - (pos - pset->addr); + + /* Otherwise mark it done and update residue_stat. */ + edesc->processed_stat++; + edesc->residue_stat -= pset->len; + } + return edesc->residue_stat; } /* Check request completion status */ @@ -790,13 +951,10 @@ static enum dma_status edma_tx_status(struct dma_chan *chan, return ret; spin_lock_irqsave(&echan->vchan.lock, flags); - vdesc = vchan_find_desc(&echan->vchan, cookie); - if (vdesc) { - txstate->residue = edma_desc_size(to_edma_desc(&vdesc->tx)); - } else if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) { - struct edma_desc *edesc = echan->edesc; - txstate->residue = edma_desc_size(edesc); - } + if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) + txstate->residue = edma_residue(echan->edesc); + else if ((vdesc = vchan_find_desc(&echan->vchan, cookie))) + txstate->residue = to_edma_desc(&vdesc->tx)->residue; spin_unlock_irqrestore(&echan->vchan.lock, flags); return ret; @@ -822,18 +980,43 @@ static void __init edma_chan_init(struct edma_cc *ecc, } } +#define EDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \ + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES)) + +static int edma_dma_device_slave_caps(struct dma_chan *dchan, + struct dma_slave_caps *caps) +{ + caps->src_addr_widths = EDMA_DMA_BUSWIDTHS; + caps->dstn_addr_widths = EDMA_DMA_BUSWIDTHS; + caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + caps->cmd_pause = true; + caps->cmd_terminate = true; + caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR; + + return 0; +} + static void edma_dma_init(struct edma_cc *ecc, struct dma_device *dma, struct device *dev) { dma->device_prep_slave_sg = edma_prep_slave_sg; dma->device_prep_dma_cyclic = edma_prep_dma_cyclic; + dma->device_prep_dma_memcpy = edma_prep_dma_memcpy; dma->device_alloc_chan_resources = edma_alloc_chan_resources; dma->device_free_chan_resources = edma_free_chan_resources; dma->device_issue_pending = edma_issue_pending; dma->device_tx_status = edma_tx_status; dma->device_control = edma_control; + dma->device_slave_caps = edma_dma_device_slave_caps; dma->dev = dev; + /* + * code using dma memcpy must make sure alignment of + * length is at dma->copy_align boundary. + */ + dma->copy_align = DMA_SLAVE_BUSWIDTH_4_BYTES; + INIT_LIST_HEAD(&dma->channels); } @@ -861,6 +1044,8 @@ static int edma_probe(struct platform_device *pdev) dma_cap_zero(ecc->dma_slave.cap_mask); dma_cap_set(DMA_SLAVE, ecc->dma_slave.cap_mask); + dma_cap_set(DMA_CYCLIC, ecc->dma_slave.cap_mask); + dma_cap_set(DMA_MEMCPY, ecc->dma_slave.cap_mask); edma_dma_init(ecc, &ecc->dma_slave, &pdev->dev); diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c index b59a17fb7c3e..ff7138fd66d1 100644 --- a/drivers/memory/mvebu-devbus.c +++ b/drivers/memory/mvebu-devbus.c @@ -2,7 +2,7 @@ * Marvell EBU SoC Device Bus Controller * (memory controller for NOR/NAND/SRAM/FPGA devices) * - * Copyright (C) 2013 Marvell + * Copyright (C) 2013-2014 Marvell * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -30,19 +30,47 @@ #include /* Register definitions */ -#define DEV_WIDTH_BIT 30 -#define BADR_SKEW_BIT 28 -#define RD_HOLD_BIT 23 -#define ACC_NEXT_BIT 17 -#define RD_SETUP_BIT 12 -#define ACC_FIRST_BIT 6 +#define ARMADA_DEV_WIDTH_SHIFT 30 +#define ARMADA_BADR_SKEW_SHIFT 28 +#define ARMADA_RD_HOLD_SHIFT 23 +#define ARMADA_ACC_NEXT_SHIFT 17 +#define ARMADA_RD_SETUP_SHIFT 12 +#define ARMADA_ACC_FIRST_SHIFT 6 -#define SYNC_ENABLE_BIT 24 -#define WR_HIGH_BIT 16 -#define WR_LOW_BIT 8 +#define ARMADA_SYNC_ENABLE_SHIFT 24 +#define ARMADA_WR_HIGH_SHIFT 16 +#define ARMADA_WR_LOW_SHIFT 8 -#define READ_PARAM_OFFSET 0x0 -#define WRITE_PARAM_OFFSET 0x4 +#define ARMADA_READ_PARAM_OFFSET 0x0 +#define ARMADA_WRITE_PARAM_OFFSET 0x4 + +#define ORION_RESERVED (0x2 << 30) +#define ORION_BADR_SKEW_SHIFT 28 +#define ORION_WR_HIGH_EXT_BIT BIT(27) +#define ORION_WR_HIGH_EXT_MASK 0x8 +#define ORION_WR_LOW_EXT_BIT BIT(26) +#define ORION_WR_LOW_EXT_MASK 0x8 +#define ORION_ALE_WR_EXT_BIT BIT(25) +#define ORION_ALE_WR_EXT_MASK 0x8 +#define ORION_ACC_NEXT_EXT_BIT BIT(24) +#define ORION_ACC_NEXT_EXT_MASK 0x10 +#define ORION_ACC_FIRST_EXT_BIT BIT(23) +#define ORION_ACC_FIRST_EXT_MASK 0x10 +#define ORION_TURN_OFF_EXT_BIT BIT(22) +#define ORION_TURN_OFF_EXT_MASK 0x8 +#define ORION_DEV_WIDTH_SHIFT 20 +#define ORION_WR_HIGH_SHIFT 17 +#define ORION_WR_HIGH_MASK 0x7 +#define ORION_WR_LOW_SHIFT 14 +#define ORION_WR_LOW_MASK 0x7 +#define ORION_ALE_WR_SHIFT 11 +#define ORION_ALE_WR_MASK 0x7 +#define ORION_ACC_NEXT_SHIFT 7 +#define ORION_ACC_NEXT_MASK 0xF +#define ORION_ACC_FIRST_SHIFT 3 +#define ORION_ACC_FIRST_MASK 0xF +#define ORION_TURN_OFF_SHIFT 0 +#define ORION_TURN_OFF_MASK 0x7 struct devbus_read_params { u32 bus_width; @@ -89,19 +117,14 @@ static int get_timing_param_ps(struct devbus *devbus, return 0; } -static int devbus_set_timing_params(struct devbus *devbus, - struct device_node *node) +static int devbus_get_timing_params(struct devbus *devbus, + struct device_node *node, + struct devbus_read_params *r, + struct devbus_write_params *w) { - struct devbus_read_params r; - struct devbus_write_params w; - u32 value; int err; - dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n", - devbus->tick_ps); - - /* Get read timings */ - err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width); + err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width); if (err < 0) { dev_err(devbus->dev, "%s has no 'devbus,bus-width' property\n", @@ -113,104 +136,148 @@ static int devbus_set_timing_params(struct devbus *devbus, * The bus width is encoded into the register as 0 for 8 bits, * and 1 for 16 bits, so we do the necessary conversion here. */ - if (r.bus_width == 8) - r.bus_width = 0; - else if (r.bus_width == 16) - r.bus_width = 1; + if (r->bus_width == 8) + r->bus_width = 0; + else if (r->bus_width == 16) + r->bus_width = 1; else { - dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width); + dev_err(devbus->dev, "invalid bus width %d\n", r->bus_width); return -EINVAL; } err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps", - &r.badr_skew); + &r->badr_skew); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps", - &r.turn_off); + &r->turn_off); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps", - &r.acc_first); + &r->acc_first); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps", - &r.acc_next); + &r->acc_next); if (err < 0) return err; - err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps", - &r.rd_setup); - if (err < 0) - return err; + if (of_device_is_compatible(devbus->dev->of_node, "marvell,mvebu-devbus")) { + err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps", + &r->rd_setup); + if (err < 0) + return err; - err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps", - &r.rd_hold); - if (err < 0) - return err; + err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps", + &r->rd_hold); + if (err < 0) + return err; - /* Get write timings */ - err = of_property_read_u32(node, "devbus,sync-enable", - &w.sync_enable); - if (err < 0) { - dev_err(devbus->dev, - "%s has no 'devbus,sync-enable' property\n", - node->full_name); - return err; + err = of_property_read_u32(node, "devbus,sync-enable", + &w->sync_enable); + if (err < 0) { + dev_err(devbus->dev, + "%s has no 'devbus,sync-enable' property\n", + node->full_name); + return err; + } } err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps", - &w.ale_wr); + &w->ale_wr); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps", - &w.wr_low); + &w->wr_low); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps", - &w.wr_high); + &w->wr_high); if (err < 0) return err; + return 0; +} + +static void devbus_orion_set_timing_params(struct devbus *devbus, + struct device_node *node, + struct devbus_read_params *r, + struct devbus_write_params *w) +{ + u32 value; + + /* + * The hardware designers found it would be a good idea to + * split most of the values in the register into two fields: + * one containing all the low-order bits, and another one + * containing just the high-order bit. For all of those + * fields, we have to split the value into these two parts. + */ + value = (r->turn_off & ORION_TURN_OFF_MASK) << ORION_TURN_OFF_SHIFT | + (r->acc_first & ORION_ACC_FIRST_MASK) << ORION_ACC_FIRST_SHIFT | + (r->acc_next & ORION_ACC_NEXT_MASK) << ORION_ACC_NEXT_SHIFT | + (w->ale_wr & ORION_ALE_WR_MASK) << ORION_ALE_WR_SHIFT | + (w->wr_low & ORION_WR_LOW_MASK) << ORION_WR_LOW_SHIFT | + (w->wr_high & ORION_WR_HIGH_MASK) << ORION_WR_HIGH_SHIFT | + r->bus_width << ORION_DEV_WIDTH_SHIFT | + ((r->turn_off & ORION_TURN_OFF_EXT_MASK) ? ORION_TURN_OFF_EXT_BIT : 0) | + ((r->acc_first & ORION_ACC_FIRST_EXT_MASK) ? ORION_ACC_FIRST_EXT_BIT : 0) | + ((r->acc_next & ORION_ACC_NEXT_EXT_MASK) ? ORION_ACC_NEXT_EXT_BIT : 0) | + ((w->ale_wr & ORION_ALE_WR_EXT_MASK) ? ORION_ALE_WR_EXT_BIT : 0) | + ((w->wr_low & ORION_WR_LOW_EXT_MASK) ? ORION_WR_LOW_EXT_BIT : 0) | + ((w->wr_high & ORION_WR_HIGH_EXT_MASK) ? ORION_WR_HIGH_EXT_BIT : 0) | + (r->badr_skew << ORION_BADR_SKEW_SHIFT) | + ORION_RESERVED; + + writel(value, devbus->base); +} + +static void devbus_armada_set_timing_params(struct devbus *devbus, + struct device_node *node, + struct devbus_read_params *r, + struct devbus_write_params *w) +{ + u32 value; + /* Set read timings */ - value = r.bus_width << DEV_WIDTH_BIT | - r.badr_skew << BADR_SKEW_BIT | - r.rd_hold << RD_HOLD_BIT | - r.acc_next << ACC_NEXT_BIT | - r.rd_setup << RD_SETUP_BIT | - r.acc_first << ACC_FIRST_BIT | - r.turn_off; + value = r->bus_width << ARMADA_DEV_WIDTH_SHIFT | + r->badr_skew << ARMADA_BADR_SKEW_SHIFT | + r->rd_hold << ARMADA_RD_HOLD_SHIFT | + r->acc_next << ARMADA_ACC_NEXT_SHIFT | + r->rd_setup << ARMADA_RD_SETUP_SHIFT | + r->acc_first << ARMADA_ACC_FIRST_SHIFT | + r->turn_off; dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n", - devbus->base + READ_PARAM_OFFSET, + devbus->base + ARMADA_READ_PARAM_OFFSET, value); - writel(value, devbus->base + READ_PARAM_OFFSET); + writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET); /* Set write timings */ - value = w.sync_enable << SYNC_ENABLE_BIT | - w.wr_low << WR_LOW_BIT | - w.wr_high << WR_HIGH_BIT | - w.ale_wr; + value = w->sync_enable << ARMADA_SYNC_ENABLE_SHIFT | + w->wr_low << ARMADA_WR_LOW_SHIFT | + w->wr_high << ARMADA_WR_HIGH_SHIFT | + w->ale_wr; dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n", - devbus->base + WRITE_PARAM_OFFSET, + devbus->base + ARMADA_WRITE_PARAM_OFFSET, value); - writel(value, devbus->base + WRITE_PARAM_OFFSET); - - return 0; + writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET); } static int mvebu_devbus_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; + struct devbus_read_params r; + struct devbus_write_params w; struct devbus *devbus; struct resource *res; struct clk *clk; @@ -240,10 +307,21 @@ static int mvebu_devbus_probe(struct platform_device *pdev) rate = clk_get_rate(clk) / 1000; devbus->tick_ps = 1000000000 / rate; - /* Read the device tree node and set the new timing parameters */ - err = devbus_set_timing_params(devbus, node); - if (err < 0) - return err; + dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n", + devbus->tick_ps); + + if (!of_property_read_bool(node, "devbus,keep-config")) { + /* Read the Device Tree node */ + err = devbus_get_timing_params(devbus, node, &r, &w); + if (err < 0) + return err; + + /* Set the new timing parameters */ + if (of_device_is_compatible(node, "marvell,orion-devbus")) + devbus_orion_set_timing_params(devbus, node, &r, &w); + else + devbus_armada_set_timing_params(devbus, node, &r, &w); + } /* * We need to create a child device explicitly from here to @@ -259,6 +337,7 @@ static int mvebu_devbus_probe(struct platform_device *pdev) static const struct of_device_id mvebu_devbus_of_match[] = { { .compatible = "marvell,mvebu-devbus" }, + { .compatible = "marvell,orion-devbus" }, {}, }; MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match); diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 49b46e6ca959..bdcf5173e377 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -51,6 +51,13 @@ config POWER_RESET_RESTART Instead they restart, and u-boot holds the SoC until the user presses a key. u-boot then boots into Linux. +config POWER_RESET_SUN6I + bool "Allwinner A31 SoC reset driver" + depends on ARCH_SUNXI + depends on POWER_RESET + help + Reboot support for the Allwinner A31 SoCs. + config POWER_RESET_VEXPRESS bool "ARM Versatile Express power-off and reset driver" depends on ARM || ARM64 @@ -65,3 +72,11 @@ config POWER_RESET_XGENE depends on POWER_RESET help Reboot support for the APM SoC X-Gene Eval boards. + +config POWER_RESET_KEYSTONE + bool "Keystone reset driver" + depends on ARCH_KEYSTONE + select MFD_SYSCON + help + Reboot support for the KEYSTONE SoCs. + diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 16c0516e5a19..dde2e8bbac53 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -4,5 +4,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o +obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o +obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c new file mode 100644 index 000000000000..408a18fd91cb --- /dev/null +++ b/drivers/power/reset/keystone-reset.c @@ -0,0 +1,166 @@ +/* + * TI keystone reboot driver + * + * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/ + * + * Author: Ivan Khoronzhuk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RSTYPE_RG 0x0 +#define RSCTRL_RG 0x4 +#define RSCFG_RG 0x8 +#define RSISO_RG 0xc + +#define RSCTRL_KEY_MASK 0x0000ffff +#define RSCTRL_RESET_MASK BIT(16) +#define RSCTRL_KEY 0x5a69 + +#define RSMUX_OMODE_MASK 0xe +#define RSMUX_OMODE_RESET_ON 0xa +#define RSMUX_OMODE_RESET_OFF 0x0 +#define RSMUX_LOCK_MASK 0x1 +#define RSMUX_LOCK_SET 0x1 + +#define RSCFG_RSTYPE_SOFT 0x300f +#define RSCFG_RSTYPE_HARD 0x0 + +#define WDT_MUX_NUMBER 0x4 + +static int rspll_offset; +static struct regmap *pllctrl_regs; + +/** + * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG + * To be able to access to RSCTRL, RSCFG registers + * we have to write a key before + */ +static inline int rsctrl_enable_rspll_write(void) +{ + return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG, + RSCTRL_KEY_MASK, RSCTRL_KEY); +} + +static void rsctrl_restart(enum reboot_mode mode, const char *cmd) +{ + /* enable write access to RSTCTRL */ + rsctrl_enable_rspll_write(); + + /* reset the SOC */ + regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG, + RSCTRL_RESET_MASK, 0); +} + +static struct of_device_id rsctrl_of_match[] = { + {.compatible = "ti,keystone-reset", }, + {}, +}; + +static int rsctrl_probe(struct platform_device *pdev) +{ + int i; + int ret; + u32 val; + unsigned int rg; + u32 rsmux_offset; + struct regmap *devctrl_regs; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + + if (!np) + return -ENODEV; + + /* get regmaps */ + pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll"); + if (IS_ERR(pllctrl_regs)) + return PTR_ERR(pllctrl_regs); + + devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev"); + if (IS_ERR(devctrl_regs)) + return PTR_ERR(devctrl_regs); + + ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset); + if (ret) { + dev_err(dev, "couldn't read the reset pll offset!\n"); + return -EINVAL; + } + + ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset); + if (ret) { + dev_err(dev, "couldn't read the rsmux offset!\n"); + return -EINVAL; + } + + /* set soft/hard reset */ + val = of_property_read_bool(np, "ti,soft-reset"); + val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD; + + ret = rsctrl_enable_rspll_write(); + if (ret) + return ret; + + ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val); + if (ret) + return ret; + + arm_pm_restart = rsctrl_restart; + + /* disable a reset isolation for all module clocks */ + ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0); + if (ret) + return ret; + + /* enable a reset for watchdogs from wdt-list */ + for (i = 0; i < WDT_MUX_NUMBER; i++) { + ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val); + if (ret == -EOVERFLOW && !i) { + dev_err(dev, "ti,wdt-list property has to contain at" + "least one entry\n"); + return -EINVAL; + } else if (ret) { + break; + } + + if (val >= WDT_MUX_NUMBER) { + dev_err(dev, "ti,wdt-list property can contain" + "only numbers < 4\n"); + return -EINVAL; + } + + rg = rsmux_offset + val * 4; + + ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK, + RSMUX_OMODE_RESET_ON | + RSMUX_LOCK_SET); + if (ret) + return ret; + } + + return 0; +} + +static struct platform_driver rsctrl_driver = { + .probe = rsctrl_probe, + .driver = { + .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + .of_match_table = rsctrl_of_match, + }, +}; +module_platform_driver(rsctrl_driver); + +MODULE_AUTHOR("Ivan Khoronzhuk "); +MODULE_DESCRIPTION("Texas Instruments keystone reset driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" KBUILD_MODNAME); diff --git a/drivers/power/reset/sun6i-reboot.c b/drivers/power/reset/sun6i-reboot.c new file mode 100644 index 000000000000..af2cd7ff2fe8 --- /dev/null +++ b/drivers/power/reset/sun6i-reboot.c @@ -0,0 +1,85 @@ +/* + * Allwinner A31 SoCs reset code + * + * Copyright (C) 2012-2014 Maxime Ripard + * + * Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#define SUN6I_WATCHDOG1_IRQ_REG 0x00 +#define SUN6I_WATCHDOG1_CTRL_REG 0x10 +#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 +#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) +#define SUN6I_WATCHDOG1_MODE_REG 0x18 +#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) + +static void __iomem *wdt_base; + +static void sun6i_wdt_restart(enum reboot_mode mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Disable interrupts */ + writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG); + + /* We want to disable the IRQ and just reset the whole system */ + writel(SUN6I_WATCHDOG1_CONFIG_RESTART, + wdt_base + SUN6I_WATCHDOG1_CONFIG_REG); + + /* Enable timer. The default and lowest interval value is 0.5s */ + writel(SUN6I_WATCHDOG1_MODE_ENABLE, + wdt_base + SUN6I_WATCHDOG1_MODE_REG); + + /* Restart the watchdog. */ + writel(SUN6I_WATCHDOG1_CTRL_RESTART, + wdt_base + SUN6I_WATCHDOG1_CTRL_REG); + + while (1) { + mdelay(5); + writel(SUN6I_WATCHDOG1_MODE_ENABLE, + wdt_base + SUN6I_WATCHDOG1_MODE_REG); + } +} + +static int sun6i_reboot_probe(struct platform_device *pdev) +{ + wdt_base = of_iomap(pdev->dev.of_node, 0); + if (!wdt_base) { + WARN(1, "failed to map watchdog base address"); + return -ENODEV; + } + + arm_pm_restart = sun6i_wdt_restart; + + return 0; +} + +static struct of_device_id sun6i_reboot_of_match[] = { + { .compatible = "allwinner,sun6i-a31-wdt" }, + {} +}; + +static struct platform_driver sun6i_reboot_driver = { + .probe = sun6i_reboot_probe, + .driver = { + .name = "sun6i-reboot", + .of_match_table = sun6i_reboot_of_match, + }, +}; +module_platform_driver(sun6i_reboot_driver); diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 4f60caf750ce..60fed3d7820b 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_RESET_CONTROLLER) += core.o +obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o obj-$(CONFIG_ARCH_STI) += sti/ diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c new file mode 100644 index 000000000000..79c32ca84ef1 --- /dev/null +++ b/drivers/reset/reset-socfpga.c @@ -0,0 +1,146 @@ +/* + * Copyright 2014 Steffen Trumtrar + * + * based on + * Allwinner SoCs Reset Controller driver + * + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define NR_BANKS 4 +#define OFFSET_MODRST 0x10 + +struct socfpga_reset_data { + spinlock_t lock; + void __iomem *membase; + struct reset_controller_dev rcdev; +}; + +static int socfpga_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct socfpga_reset_data *data = container_of(rcdev, + struct socfpga_reset_data, + rcdev); + int bank = id / BITS_PER_LONG; + int offset = id % BITS_PER_LONG; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&data->lock, flags); + + reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS)); + writel(reg | BIT(offset), data->membase + OFFSET_MODRST + + (bank * NR_BANKS)); + spin_unlock_irqrestore(&data->lock, flags); + + return 0; +} + +static int socfpga_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct socfpga_reset_data *data = container_of(rcdev, + struct socfpga_reset_data, + rcdev); + + int bank = id / BITS_PER_LONG; + int offset = id % BITS_PER_LONG; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&data->lock, flags); + + reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS)); + writel(reg & ~BIT(offset), data->membase + OFFSET_MODRST + + (bank * NR_BANKS)); + + spin_unlock_irqrestore(&data->lock, flags); + + return 0; +} + +static struct reset_control_ops socfpga_reset_ops = { + .assert = socfpga_reset_assert, + .deassert = socfpga_reset_deassert, +}; + +static int socfpga_reset_probe(struct platform_device *pdev) +{ + struct socfpga_reset_data *data; + struct resource *res; + + /* + * The binding was mainlined without the required property. + * Do not continue, when we encounter an old DT. + */ + if (!of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) { + dev_err(&pdev->dev, "%s missing #reset-cells property\n", + pdev->dev.of_node->full_name); + return -EINVAL; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->membase)) + return PTR_ERR(data->membase); + + spin_lock_init(&data->lock); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.nr_resets = NR_BANKS * BITS_PER_LONG; + data->rcdev.ops = &socfpga_reset_ops; + data->rcdev.of_node = pdev->dev.of_node; + reset_controller_register(&data->rcdev); + + return 0; +} + +static int socfpga_reset_remove(struct platform_device *pdev) +{ + struct socfpga_reset_data *data = platform_get_drvdata(pdev); + + reset_controller_unregister(&data->rcdev); + + return 0; +} + +static const struct of_device_id socfpga_reset_dt_ids[] = { + { .compatible = "altr,rst-mgr", }, + { /* sentinel */ }, +}; + +static struct platform_driver socfpga_reset_driver = { + .probe = socfpga_reset_probe, + .remove = socfpga_reset_remove, + .driver = { + .name = "socfpga-reset", + .owner = THIS_MODULE, + .of_match_table = socfpga_reset_dt_ids, + }, +}; +module_platform_driver(socfpga_reset_driver); + +MODULE_AUTHOR("Steffen Trumtrar dev.of_node); + struct sunxi_reset_data *data; + struct resource *res; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->membase)) + return PTR_ERR(data->membase); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.nr_resets = resource_size(res) * 32; + data->rcdev.ops = &sunxi_reset_ops; + data->rcdev.of_node = pdev->dev.of_node; + + return reset_controller_register(&data->rcdev); } static int sunxi_reset_remove(struct platform_device *pdev) @@ -153,8 +170,6 @@ static int sunxi_reset_remove(struct platform_device *pdev) struct sunxi_reset_data *data = platform_get_drvdata(pdev); reset_controller_unregister(&data->rcdev); - iounmap(data->membase); - kfree(data); return 0; } diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig new file mode 100644 index 000000000000..c8543855aa82 --- /dev/null +++ b/drivers/soc/Kconfig @@ -0,0 +1,5 @@ +menu "SOC (System On Chip) specific Drivers" + +source "drivers/soc/qcom/Kconfig" + +endmenu diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile new file mode 100644 index 000000000000..0f7c44793b29 --- /dev/null +++ b/drivers/soc/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Linux Kernel SOC specific device drivers. +# + +obj-$(CONFIG_ARCH_QCOM) += qcom/ diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig new file mode 100644 index 000000000000..7bd2c94f54a4 --- /dev/null +++ b/drivers/soc/qcom/Kconfig @@ -0,0 +1,11 @@ +# +# QCOM Soc drivers +# +config QCOM_GSBI + tristate "QCOM General Serial Bus Interface" + depends on ARCH_QCOM + help + Say y here to enable GSBI support. The GSBI provides control + functions for connecting the underlying serial UART, SPI, and I2C + devices to the output pins. + diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile new file mode 100644 index 000000000000..438901257ac1 --- /dev/null +++ b/drivers/soc/qcom/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c new file mode 100644 index 000000000000..447458e696a9 --- /dev/null +++ b/drivers/soc/qcom/qcom_gsbi.c @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2014, The Linux foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License rev 2 and + * only rev 2 as published by the free Software foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define GSBI_CTRL_REG 0x0000 +#define GSBI_PROTOCOL_SHIFT 4 + +static int gsbi_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct resource *res; + void __iomem *base; + struct clk *hclk; + u32 mode, crci = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + if (of_property_read_u32(node, "qcom,mode", &mode)) { + dev_err(&pdev->dev, "missing mode configuration\n"); + return -EINVAL; + } + + /* not required, so default to 0 if not present */ + of_property_read_u32(node, "qcom,crci", &crci); + + dev_info(&pdev->dev, "GSBI port protocol: %d crci: %d\n", mode, crci); + + hclk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(hclk)) + return PTR_ERR(hclk); + + clk_prepare_enable(hclk); + + writel_relaxed((mode << GSBI_PROTOCOL_SHIFT) | crci, + base + GSBI_CTRL_REG); + + /* make sure the gsbi control write is not reordered */ + wmb(); + + clk_disable_unprepare(hclk); + + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); +} + +static const struct of_device_id gsbi_dt_match[] = { + { .compatible = "qcom,gsbi-v1.0.0", }, + { }, +}; + +MODULE_DEVICE_TABLE(of, gsbi_dt_match); + +static struct platform_driver gsbi_driver = { + .driver = { + .name = "gsbi", + .owner = THIS_MODULE, + .of_match_table = gsbi_dt_match, + }, + .probe = gsbi_probe, +}; + +module_platform_driver(gsbi_driver); + +MODULE_AUTHOR("Andy Gross "); +MODULE_DESCRIPTION("QCOM GSBI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 053b98eb46c8..778e376f197e 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -52,7 +52,6 @@ struct msm_port { struct clk *clk; struct clk *pclk; unsigned int imr; - void __iomem *gsbi_base; int is_uartdm; unsigned int old_snap_state; }; @@ -599,9 +598,7 @@ static const char *msm_type(struct uart_port *port) static void msm_release_port(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); - struct msm_port *msm_port = UART_TO_MSM(port); struct resource *uart_resource; - struct resource *gsbi_resource; resource_size_t size; uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -612,28 +609,12 @@ static void msm_release_port(struct uart_port *port) release_mem_region(port->mapbase, size); iounmap(port->membase); port->membase = NULL; - - if (msm_port->gsbi_base) { - writel_relaxed(GSBI_PROTOCOL_IDLE, - msm_port->gsbi_base + GSBI_CONTROL); - - gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (unlikely(!gsbi_resource)) - return; - - size = resource_size(gsbi_resource); - release_mem_region(gsbi_resource->start, size); - iounmap(msm_port->gsbi_base); - msm_port->gsbi_base = NULL; - } } static int msm_request_port(struct uart_port *port) { - struct msm_port *msm_port = UART_TO_MSM(port); struct platform_device *pdev = to_platform_device(port->dev); struct resource *uart_resource; - struct resource *gsbi_resource; resource_size_t size; int ret; @@ -652,30 +633,8 @@ static int msm_request_port(struct uart_port *port) goto fail_release_port; } - gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1); - /* Is this a GSBI-based port? */ - if (gsbi_resource) { - size = resource_size(gsbi_resource); - - if (!request_mem_region(gsbi_resource->start, size, - "msm_serial")) { - ret = -EBUSY; - goto fail_release_port_membase; - } - - msm_port->gsbi_base = ioremap(gsbi_resource->start, size); - if (!msm_port->gsbi_base) { - ret = -EBUSY; - goto fail_release_gsbi; - } - } - return 0; -fail_release_gsbi: - release_mem_region(gsbi_resource->start, size); -fail_release_port_membase: - iounmap(port->membase); fail_release_port: release_mem_region(port->mapbase, size); return ret; @@ -683,7 +642,6 @@ fail_release_port: static void msm_config_port(struct uart_port *port, int flags) { - struct msm_port *msm_port = UART_TO_MSM(port); int ret; if (flags & UART_CONFIG_TYPE) { port->type = PORT_MSM; @@ -691,9 +649,6 @@ static void msm_config_port(struct uart_port *port, int flags) if (ret) return; } - if (msm_port->gsbi_base) - writel_relaxed(GSBI_PROTOCOL_UART, - msm_port->gsbi_base + GSBI_CONTROL); } static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) @@ -1110,6 +1065,7 @@ static struct of_device_id msm_match_table[] = { static struct platform_driver msm_platform_driver = { .remove = msm_serial_remove, + .probe = msm_serial_probe, .driver = { .name = "msm_serial", .owner = THIS_MODULE, @@ -1125,7 +1081,7 @@ static int __init msm_serial_init(void) if (unlikely(ret)) return ret; - ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe); + ret = platform_driver_register(&msm_platform_driver); if (unlikely(ret)) uart_unregister_driver(&msm_uart_driver); diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index 1e9b68b6f9eb..d98d45efdf86 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -109,11 +109,6 @@ #define UART_ISR 0x0014 #define UART_ISR_TX_READY (1 << 7) -#define GSBI_CONTROL 0x0 -#define GSBI_PROTOCOL_CODE 0x30 -#define GSBI_PROTOCOL_UART 0x40 -#define GSBI_PROTOCOL_IDLE 0x0 - #define UARTDM_RXFS 0x50 #define UARTDM_RXFS_BUF_SHIFT 0x7 #define UARTDM_RXFS_BUF_MASK 0x7 diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index f50821cb64be..eb8d5627d080 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -43,15 +43,15 @@ /* PaRAM slots are laid out like this */ struct edmacc_param { - unsigned int opt; - unsigned int src; - unsigned int a_b_cnt; - unsigned int dst; - unsigned int src_dst_bidx; - unsigned int link_bcntrld; - unsigned int src_dst_cidx; - unsigned int ccnt; -}; + u32 opt; + u32 src; + u32 a_b_cnt; + u32 dst; + u32 src_dst_bidx; + u32 link_bcntrld; + u32 src_dst_cidx; + u32 ccnt; +} __packed; /* fields in edmacc_param.opt */ #define SAM BIT(0) @@ -130,7 +130,7 @@ void edma_set_src(unsigned slot, dma_addr_t src_port, enum address_mode mode, enum fifo_width); void edma_set_dest(unsigned slot, dma_addr_t dest_port, enum address_mode mode, enum fifo_width); -void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +dma_addr_t edma_get_position(unsigned slot, bool dst); void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, @@ -158,13 +158,6 @@ struct edma_rsv_info { /* platform_data for EDMA driver */ struct edma_soc_info { - - /* how many dma resources of each type */ - unsigned n_channel; - unsigned n_region; - unsigned n_slot; - unsigned n_tc; - unsigned n_cc; /* * Default queue is expected to be a low-priority queue. * This way, long transfers on the default queue started @@ -175,7 +168,6 @@ struct edma_soc_info { /* Resource reservation for other cores */ struct edma_rsv_info *rsv; - s8 (*queue_tc_mapping)[2]; s8 (*queue_priority_mapping)[2]; const s16 (*xbar_chans)[2]; };