diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 00721e8807ab..4bc6f4201340 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1521,15 +1521,14 @@ static bool xhci_port_missing_cas_quirk(int port_index,
 int xhci_bus_resume(struct usb_hcd *hcd)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	int max_ports, port_index;
-	__le32 __iomem **port_array;
 	struct xhci_bus_state *bus_state;
-	u32 temp;
+	__le32 __iomem **port_array;
 	unsigned long flags;
-	unsigned long port_was_suspended = 0;
-	bool need_usb2_u3_exit = false;
+	int max_ports, port_index;
 	int slot_id;
 	int sret;
+	u32 next_state;
+	u32 temp, portsc;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -1548,68 +1547,77 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 	temp &= ~CMD_EIE;
 	writel(temp, &xhci->op_regs->command);
 
+	/* bus specific resume for ports we suspended at bus_suspend */
+	if (hcd->speed >= HCD_USB3)
+		next_state = XDEV_U0;
+	else
+		next_state = XDEV_RESUME;
+
 	port_index = max_ports;
 	while (port_index--) {
-		/* Check whether need resume ports. If needed
-		   resume port and disable remote wakeup */
-		u32 temp;
-
-		temp = readl(port_array[port_index]);
+		portsc = readl(port_array[port_index]);
 
 		/* warm reset CAS limited ports stuck in polling/compliance */
 		if ((xhci->quirks & XHCI_MISSING_CAS) &&
 		    (hcd->speed >= HCD_USB3) &&
 		    xhci_port_missing_cas_quirk(port_index, port_array)) {
 			xhci_dbg(xhci, "reset stuck port %d\n", port_index);
+			clear_bit(port_index, &bus_state->bus_suspended);
 			continue;
 		}
-		if (DEV_SUPERSPEED_ANY(temp))
-			temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
-		else
-			temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
-		if (test_bit(port_index, &bus_state->bus_suspended) &&
-		    (temp & PORT_PLS_MASK)) {
-			set_bit(port_index, &port_was_suspended);
-			if (!DEV_SUPERSPEED_ANY(temp)) {
-				xhci_set_link_state(xhci, port_array,
-						port_index, XDEV_RESUME);
-				need_usb2_u3_exit = true;
+		/* resume if we suspended the link, and it is still suspended */
+		if (test_bit(port_index, &bus_state->bus_suspended))
+			switch (portsc & PORT_PLS_MASK) {
+			case XDEV_U3:
+				portsc = xhci_port_state_to_neutral(portsc);
+				portsc &= ~PORT_PLS_MASK;
+				portsc |= PORT_LINK_STROBE | next_state;
+				break;
+			case XDEV_RESUME:
+				/* resume already initiated */
+				break;
+			default:
+				/* not in a resumeable state, ignore it */
+				clear_bit(port_index,
+					  &bus_state->bus_suspended);
+				break;
 			}
-		} else
-			writel(temp, port_array[port_index]);
+		/* disable wake for all ports, write new link state if needed */
+		portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+		writel(portsc, port_array[port_index]);
 	}
 
-	if (need_usb2_u3_exit) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		msleep(USB_RESUME_TIMEOUT);
-		spin_lock_irqsave(&xhci->lock, flags);
+	/* USB2 specific resume signaling delay and U0 link state transition */
+	if (hcd->speed < HCD_USB3) {
+		if (bus_state->bus_suspended) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(USB_RESUME_TIMEOUT);
+			spin_lock_irqsave(&xhci->lock, flags);
+		}
+		for_each_set_bit(port_index, &bus_state->bus_suspended,
+				 BITS_PER_LONG) {
+			/* Clear PLC to poll it later for U0 transition */
+			xhci_test_and_clear_bit(xhci, port_array, port_index,
+						PORT_PLC);
+			xhci_set_link_state(xhci, port_array, port_index,
+					    XDEV_U0);
+		}
 	}
 
-	port_index = max_ports;
-	while (port_index--) {
-		if (!(port_was_suspended & BIT(port_index)))
-			continue;
-		/* Clear PLC to poll it later after XDEV_U0 */
-		xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC);
-		xhci_set_link_state(xhci, port_array, port_index, XDEV_U0);
-	}
-
-	port_index = max_ports;
-	while (port_index--) {
-		if (!(port_was_suspended & BIT(port_index)))
-			continue;
-		/* Poll and Clear PLC */
+	/* poll for U0 link state complete, both USB2 and USB3 */
+	for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) {
 		sret = xhci_handshake(port_array[port_index], PORT_PLC,
 				      PORT_PLC, 10 * 1000);
-		if (sret)
+		if (sret) {
 			xhci_warn(xhci, "port %d resume PLC timeout\n",
 				  port_index);
+			continue;
+		}
 		xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC);
 		slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1);
 		if (slot_id)
 			xhci_ring_device(xhci, slot_id);
 	}
-
 	(void) readl(&xhci->op_regs->command);
 
 	bus_state->next_statechange = jiffies + msecs_to_jiffies(5);