From a93876c16275376c4f9f1630ce24036d329fa7a0 Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Tue, 8 Nov 2005 19:15:30 +0000 Subject: [PATCH] [ARM] 3123/1: Sharp SL-6000x: Add IRDA, MMC, UDC and keyboard device Patch from Dirk Opfer This patch adds MMC, IRDA and UDC support to the Sharp SL-6000x device. Also it adds a platform device for the keyboard driver. Signed-off-by: Dirk Opfer Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 117 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 116 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 400609f8b6a8..f3e01891e851 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -111,16 +111,128 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { }, }; +/* + * USB Device Controller + */ +static void tosa_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + } +} + +static int tosa_udc_is_connected(void) +{ + return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); +} + + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + .udc_command = tosa_udc_command, + .udc_is_connected = tosa_udc_is_connected, +}; + +/* + * MMC/SD Device + */ +static struct pxamci_platform_data tosa_mci_platform_data; + +static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); + + tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT, + "MMC/SD card detect", data); + if (err) { + printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void tosa_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) { + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } else { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } +} + +static int tosa_mci_get_ro(struct device *dev) +{ + return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); +} + +static void tosa_mci_exit(struct device *dev, void *data) +{ + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data tosa_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = tosa_mci_init, + .get_ro = tosa_mci_get_ro, + .setpower = tosa_mci_setpower, + .exit = tosa_mci_exit, +}; + +/* + * Irda + */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); + pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); + } else { + pxa_gpio_mode(GPIO47_STTXD_MD); + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + } +} + +static struct pxaficp_platform_data tosa_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = tosa_irda_transceiver_mode, +}; + +/* + * Tosa Keyboard + */ +static struct platform_device tosakbd_device = { + .name = "tosa-keyboard", + .id = -1, +}; static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, + &tosakbd_device, }; static void __init tosa_init(void) { pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); /* setup sleep mode values */ PWER = 0x00000002; @@ -131,9 +243,12 @@ static void __init tosa_init(void) PGSR2 = 0x00014000; PCFR |= PCFR_OPDE; - // enable batt_fault + /* enable batt_fault */ PMCR = 0x01; + pxa_set_mci_info(&tosa_mci_platform_data); + pxa_set_udc_info(&udc_info); + pxa_set_ficp_info(&tosa_ficp_platform_data); platform_add_devices(devices, ARRAY_SIZE(devices)); scoop_num = 2;