Staging: comedi: Fixed long line lengths in comedi.h
This patch fixes quite a few long line lengths in comedi.h as reported by checkpatch.pl Signed-off-by: Mark Rankilor <reodge@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Mark
Greg Kroah-Hartman
parent
f65515275e
commit
a9560a7275
|
|
@ -156,15 +156,15 @@
|
|||
#define TRIG_ANY 0xffffffff
|
||||
#define TRIG_INVALID 0x00000000
|
||||
|
||||
#define TRIG_NONE 0x00000001 /* never trigger */
|
||||
#define TRIG_NOW 0x00000002 /* trigger now + N ns */
|
||||
#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */
|
||||
#define TRIG_TIME 0x00000008 /* trigger at time N ns */
|
||||
#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */
|
||||
#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */
|
||||
#define TRIG_EXT 0x00000040 /* trigger on external signal N */
|
||||
#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */
|
||||
#define TRIG_OTHER 0x00000100 /* driver defined */
|
||||
#define TRIG_NONE 0x00000001 /* never trigger */
|
||||
#define TRIG_NOW 0x00000002 /* trigger now + N ns */
|
||||
#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */
|
||||
#define TRIG_TIME 0x00000008 /* trigger at time N ns */
|
||||
#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */
|
||||
#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */
|
||||
#define TRIG_EXT 0x00000040 /* trigger on external signal N */
|
||||
#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */
|
||||
#define TRIG_OTHER 0x00000100 /* driver defined */
|
||||
|
||||
/* subdevice flags */
|
||||
|
||||
|
|
@ -181,14 +181,17 @@
|
|||
#define SDF_MODE3 0x0400 /* can do mode 3 */
|
||||
#define SDF_MODE4 0x0800 /* can do mode 4 */
|
||||
#define SDF_CMD 0x1000 /* can do commands (deprecated) */
|
||||
#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
|
||||
#define SDF_CMD_WRITE 0x4000 /* can do output commands */
|
||||
#define SDF_CMD_READ 0x8000 /* can do input commands */
|
||||
#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
|
||||
#define SDF_CMD_WRITE 0x4000 /* can do output commands */
|
||||
#define SDF_CMD_READ 0x8000 /* can do input commands */
|
||||
|
||||
#define SDF_READABLE 0x00010000 /* subdevice can be read (e.g. analog input) */
|
||||
#define SDF_WRITABLE 0x00020000 /* subdevice can be written (e.g. analog output) */
|
||||
/* subdevice can be read (e.g. analog input) */
|
||||
#define SDF_READABLE 0x00010000
|
||||
/* subdevice can be written (e.g. analog output) */
|
||||
#define SDF_WRITABLE 0x00020000
|
||||
#define SDF_WRITEABLE SDF_WRITABLE /* spelling error in API */
|
||||
#define SDF_INTERNAL 0x00040000 /* subdevice does not have externally visible lines */
|
||||
/* subdevice does not have externally visible lines */
|
||||
#define SDF_INTERNAL 0x00040000
|
||||
#define SDF_GROUND 0x00100000 /* can do aref=ground */
|
||||
#define SDF_COMMON 0x00200000 /* can do aref=common */
|
||||
#define SDF_DIFF 0x00400000 /* can do aref=diff */
|
||||
|
|
@ -255,15 +258,14 @@
|
|||
INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003,
|
||||
INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */
|
||||
INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */
|
||||
INSN_CONFIG_SET_CLOCK_SRC = 2003, /* Set master clock source */
|
||||
INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */
|
||||
INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */
|
||||
/* Set master clock source */
|
||||
INSN_CONFIG_SET_CLOCK_SRC = 2003,
|
||||
INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */
|
||||
INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */
|
||||
/* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */
|
||||
INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006, /* Get size in bytes of
|
||||
subdevice's on-board
|
||||
fifos used during
|
||||
streaming
|
||||
input/output */
|
||||
/* Get size in bytes of subdevice's on-board fifos used during
|
||||
* streaming input/output */
|
||||
INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006,
|
||||
INSN_CONFIG_SET_COUNTER_MODE = 4097,
|
||||
INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE, /* deprecated */
|
||||
INSN_CONFIG_8254_READ_STATUS = 4098,
|
||||
|
|
@ -273,8 +275,11 @@
|
|||
INSN_CONFIG_PWM_SET_PERIOD = 5000, /* sets frequency */
|
||||
INSN_CONFIG_PWM_GET_PERIOD = 5001, /* gets frequency */
|
||||
INSN_CONFIG_GET_PWM_STATUS = 5002, /* is it running? */
|
||||
INSN_CONFIG_PWM_SET_H_BRIDGE = 5003, /* sets H bridge: duty cycle and sign bit for a relay at the same time */
|
||||
INSN_CONFIG_PWM_GET_H_BRIDGE = 5004 /* gets H bridge data: duty cycle and the sign bit */
|
||||
/* sets H bridge: duty cycle and sign bit for a relay at the
|
||||
* same time */
|
||||
INSN_CONFIG_PWM_SET_H_BRIDGE = 5003,
|
||||
/* gets H bridge data: duty cycle and the sign bit */
|
||||
INSN_CONFIG_PWM_GET_H_BRIDGE = 5004
|
||||
};
|
||||
|
||||
enum comedi_io_direction {
|
||||
|
|
@ -362,7 +367,7 @@
|
|||
unsigned int __user *chanlist; /* channel/range list */
|
||||
unsigned int chanlist_len;
|
||||
|
||||
short __user *data; /* data list, size depends on subd flags */
|
||||
short __user *data; /* data list, size depends on subd flags */
|
||||
unsigned int data_len;
|
||||
};
|
||||
|
||||
|
|
@ -395,7 +400,8 @@
|
|||
unsigned int flags; /* channel flags */
|
||||
unsigned int range_type; /* lookup in kernel */
|
||||
unsigned int settling_time_0;
|
||||
unsigned insn_bits_support; /* see support_level enum for values */
|
||||
/* see support_level enum for values */
|
||||
unsigned insn_bits_support;
|
||||
unsigned int unused[8];
|
||||
};
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue