ASoC: da7210: Add support for spi regmap
This patch adds support for spi regmap feature to existing da7210 driver. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Ashish Chavan
Mark Brown
parent
eb794077b8
commit
aa0e25caaf
|
|
@ -17,6 +17,7 @@
|
|||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/module.h>
|
||||
|
|
@ -27,6 +28,7 @@
|
|||
#include <sound/tlv.h>
|
||||
|
||||
/* DA7210 register space */
|
||||
#define DA7210_PAGE_CONTROL 0x00
|
||||
#define DA7210_CONTROL 0x01
|
||||
#define DA7210_STATUS 0x02
|
||||
#define DA7210_STARTUP1 0x03
|
||||
|
|
@ -631,6 +633,7 @@ struct da7210_priv {
|
|||
};
|
||||
|
||||
static struct reg_default da7210_reg_defaults[] = {
|
||||
{ 0x00, 0x00 },
|
||||
{ 0x01, 0x11 },
|
||||
{ 0x03, 0x00 },
|
||||
{ 0x04, 0x00 },
|
||||
|
|
@ -927,13 +930,6 @@ static int da7210_probe(struct snd_soc_codec *codec)
|
|||
* DA7210_PLL_DIV3 :: DA7210_MCLK_RANGExxx
|
||||
*/
|
||||
|
||||
/*
|
||||
* make sure that DA7210 use bypass mode before start up
|
||||
*/
|
||||
snd_soc_write(codec, DA7210_STARTUP1, 0);
|
||||
snd_soc_write(codec, DA7210_PLL_DIV3,
|
||||
DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP);
|
||||
|
||||
/*
|
||||
* ADC settings
|
||||
*/
|
||||
|
|
@ -1025,16 +1021,6 @@ static int da7210_probe(struct snd_soc_codec *codec)
|
|||
DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP);
|
||||
snd_soc_update_bits(codec, DA7210_PLL, DA7210_PLL_EN, DA7210_PLL_EN);
|
||||
|
||||
/* As suggested by Dialog */
|
||||
/* unlock */
|
||||
regmap_write(da7210->regmap, DA7210_A_HID_UNLOCK, 0x8B);
|
||||
regmap_write(da7210->regmap, DA7210_A_TEST_UNLOCK, 0xB4);
|
||||
regmap_write(da7210->regmap, DA7210_A_PLL1, 0x01);
|
||||
regmap_write(da7210->regmap, DA7210_A_CP_MODE, 0x7C);
|
||||
/* re-lock */
|
||||
regmap_write(da7210->regmap, DA7210_A_HID_UNLOCK, 0x00);
|
||||
regmap_write(da7210->regmap, DA7210_A_TEST_UNLOCK, 0x00);
|
||||
|
||||
/* Activate all enabled subsystem */
|
||||
snd_soc_write(codec, DA7210_STARTUP1, DA7210_SC_MST_EN);
|
||||
|
||||
|
|
@ -1055,7 +1041,26 @@ static struct snd_soc_codec_driver soc_codec_dev_da7210 = {
|
|||
.num_dapm_routes = ARRAY_SIZE(da7210_audio_map),
|
||||
};
|
||||
|
||||
static struct regmap_config da7210_regmap = {
|
||||
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
||||
|
||||
static struct reg_default da7210_regmap_i2c_patch[] = {
|
||||
|
||||
/* System controller master disable */
|
||||
{ DA7210_STARTUP1, 0x00 },
|
||||
/* make sure that DA7210 use bypass mode before start up */
|
||||
{ DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP },
|
||||
|
||||
/* to unlock */
|
||||
{ DA7210_A_HID_UNLOCK, 0x8B},
|
||||
{ DA7210_A_TEST_UNLOCK, 0xB4},
|
||||
{ DA7210_A_PLL1, 0x01},
|
||||
{ DA7210_A_CP_MODE, 0x7C},
|
||||
/* to re-lock */
|
||||
{ DA7210_A_HID_UNLOCK, 0x00},
|
||||
{ DA7210_A_TEST_UNLOCK, 0x00},
|
||||
};
|
||||
|
||||
static const struct regmap_config da7210_regmap_config_i2c = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
|
||||
|
|
@ -1066,7 +1071,6 @@ static struct regmap_config da7210_regmap = {
|
|||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
||||
static int __devinit da7210_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
|
|
@ -1080,13 +1084,18 @@ static int __devinit da7210_i2c_probe(struct i2c_client *i2c,
|
|||
|
||||
i2c_set_clientdata(i2c, da7210);
|
||||
|
||||
da7210->regmap = regmap_init_i2c(i2c, &da7210_regmap);
|
||||
da7210->regmap = regmap_init_i2c(i2c, &da7210_regmap_config_i2c);
|
||||
if (IS_ERR(da7210->regmap)) {
|
||||
ret = PTR_ERR(da7210->regmap);
|
||||
dev_err(&i2c->dev, "regmap_init() failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regmap_register_patch(da7210->regmap, da7210_regmap_i2c_patch,
|
||||
ARRAY_SIZE(da7210_regmap_i2c_patch));
|
||||
if (ret != 0)
|
||||
dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret);
|
||||
|
||||
ret = snd_soc_register_codec(&i2c->dev,
|
||||
&soc_codec_dev_da7210, &da7210_dai, 1);
|
||||
if (ret < 0) {
|
||||
|
|
@ -1119,7 +1128,7 @@ MODULE_DEVICE_TABLE(i2c, da7210_i2c_id);
|
|||
/* I2C codec control layer */
|
||||
static struct i2c_driver da7210_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "da7210-codec",
|
||||
.name = "da7210",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = da7210_i2c_probe,
|
||||
|
|
@ -1128,11 +1137,111 @@ static struct i2c_driver da7210_i2c_driver = {
|
|||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_MASTER)
|
||||
|
||||
static struct reg_default da7210_regmap_spi_patch[] = {
|
||||
/* Dummy read to give two pulses over nCS for SPI */
|
||||
{ DA7210_AUX2, 0x00 },
|
||||
{ DA7210_AUX2, 0x00 },
|
||||
|
||||
/* System controller master disable */
|
||||
{ DA7210_STARTUP1, 0x00 },
|
||||
/* make sure that DA7210 use bypass mode before start up */
|
||||
{ DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP },
|
||||
|
||||
/* to set PAGE1 of SPI register space */
|
||||
{ DA7210_PAGE_CONTROL, 0x80 },
|
||||
/* to unlock */
|
||||
{ DA7210_A_HID_UNLOCK, 0x8B},
|
||||
{ DA7210_A_TEST_UNLOCK, 0xB4},
|
||||
{ DA7210_A_PLL1, 0x01},
|
||||
{ DA7210_A_CP_MODE, 0x7C},
|
||||
/* to re-lock */
|
||||
{ DA7210_A_HID_UNLOCK, 0x00},
|
||||
{ DA7210_A_TEST_UNLOCK, 0x00},
|
||||
/* to set back PAGE0 of SPI register space */
|
||||
{ DA7210_PAGE_CONTROL, 0x00 },
|
||||
};
|
||||
|
||||
static const struct regmap_config da7210_regmap_config_spi = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.read_flag_mask = 0x01,
|
||||
.write_flag_mask = 0x00,
|
||||
|
||||
.reg_defaults = da7210_reg_defaults,
|
||||
.num_reg_defaults = ARRAY_SIZE(da7210_reg_defaults),
|
||||
.volatile_reg = da7210_volatile_register,
|
||||
.readable_reg = da7210_readable_register,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
static int __devinit da7210_spi_probe(struct spi_device *spi)
|
||||
{
|
||||
struct da7210_priv *da7210;
|
||||
int ret;
|
||||
|
||||
da7210 = devm_kzalloc(&spi->dev, sizeof(struct da7210_priv),
|
||||
GFP_KERNEL);
|
||||
if (!da7210)
|
||||
return -ENOMEM;
|
||||
|
||||
spi_set_drvdata(spi, da7210);
|
||||
da7210->regmap = devm_regmap_init_spi(spi, &da7210_regmap_config_spi);
|
||||
if (IS_ERR(da7210->regmap)) {
|
||||
ret = PTR_ERR(da7210->regmap);
|
||||
dev_err(&spi->dev, "Failed to register regmap: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regmap_register_patch(da7210->regmap, da7210_regmap_spi_patch,
|
||||
ARRAY_SIZE(da7210_regmap_spi_patch));
|
||||
if (ret != 0)
|
||||
dev_warn(&spi->dev, "Failed to apply regmap patch: %d\n", ret);
|
||||
|
||||
ret = snd_soc_register_codec(&spi->dev,
|
||||
&soc_codec_dev_da7210, &da7210_dai, 1);
|
||||
if (ret < 0)
|
||||
goto err_regmap;
|
||||
|
||||
return ret;
|
||||
|
||||
err_regmap:
|
||||
regmap_exit(da7210->regmap);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit da7210_spi_remove(struct spi_device *spi)
|
||||
{
|
||||
struct da7210_priv *da7210 = spi_get_drvdata(spi);
|
||||
snd_soc_unregister_codec(&spi->dev);
|
||||
regmap_exit(da7210->regmap);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct spi_driver da7210_spi_driver = {
|
||||
.driver = {
|
||||
.name = "da7210",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = da7210_spi_probe,
|
||||
.remove = __devexit_p(da7210_spi_remove)
|
||||
};
|
||||
#endif
|
||||
|
||||
static int __init da7210_modinit(void)
|
||||
{
|
||||
int ret = 0;
|
||||
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
||||
ret = i2c_add_driver(&da7210_i2c_driver);
|
||||
#endif
|
||||
#if defined(CONFIG_SPI_MASTER)
|
||||
ret = spi_register_driver(&da7210_spi_driver);
|
||||
if (ret) {
|
||||
printk(KERN_ERR "Failed to register da7210 SPI driver: %d\n",
|
||||
ret);
|
||||
}
|
||||
#endif
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -1143,6 +1252,9 @@ static void __exit da7210_exit(void)
|
|||
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
||||
i2c_del_driver(&da7210_i2c_driver);
|
||||
#endif
|
||||
#if defined(CONFIG_SPI_MASTER)
|
||||
spi_unregister_driver(&da7210_spi_driver);
|
||||
#endif
|
||||
}
|
||||
module_exit(da7210_exit);
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue