mvebu SoC suspend changes for v3.19

- Armada 370/XP suspend/resume support
 
  - mvebu SoC driver suspend/resume support
     - irqchip
     - clocksource
     - mbus
     - clk
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUe0lIAAoJEP45WPkGe8Zn/IgP/jOO8c7t7dohRbAe3axzIcaC
 DLL7d7j0AScZGXLx1/xJrFFY/P3gn3dlLR7HnT0t4K7vcW0kP4orMGo6FcGicSOZ
 VzQf88cOkunKf9NTM1Y0LOXVWTHGuACiXAnxook5A6k+l0xQ1t+uewgEKrg/33VK
 6WQ6woe2eYFwghkFwL3ybjttOPM5nxPef6v3TZ3LfwSUBsnSm70F1XiO8xZJH+LM
 fL83P409LGWgohwSaXYRdPJcNM0U7QMNo6i/If9NNBhIkdKb6llhQ/DvI+aXUvqB
 aD9/4t+Q75yki0mXIin6irltjspWsR8OFbaKZOM5IBFp/XrsKvNU+wy++7z9se9z
 qfG1QYmKk3ddI0isoksuIJpfbrlbQqFKCGlNkn8HVi4xCYCijNgb5bUrHQ27Aa4U
 GGisAOhqs9Ktpz96WeNKjvNQBSJZ3ESd6tlLrwCei8DwEdT0Z73jr1aEnulurpPG
 A3kiUhVpRIU+w0cth5Kix2bZj7JGsykzu1x5xORLE+MN8RSgmoveGyY5CBp2MHrl
 NxR/u98SD9I/rWT3DwQIKxM5ZqF4AAnyj4SaSWR/f40kWMU+A+eMEfo8VUeO88fl
 ygeeHTghSf58gbdgganRfDyY8OaQHeYNNKbWK6c7vxyMX98vwHOtOb5JS3nn0p7q
 Fugy/6qf+ZqYHT4nczJO
 =uX+e
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-soc-suspend-3.19' of git://git.infradead.org/linux-mvebu into next/soc

Pull "mvebu SoC suspend changes for v3.19" from Jason Cooper:

 - Armada 370/XP suspend/resume support

 - mvebu SoC driver suspend/resume support
    - irqchip
    - clocksource
    - mbus
    - clk

* tag 'mvebu-soc-suspend-3.19' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  Documentation: dt-bindings: minimal documentation for MVEBU SDRAM controller

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2014-12-04 16:46:43 +01:00
commit ab64920c37
18 changed files with 777 additions and 32 deletions

View File

@ -48,9 +48,12 @@ Required properties:
- compatible: Should be set to "marvell,mbus-controller".
- reg: Device's register space.
Two entries are expected (see the examples below):
the first one controls the devices decoding window and
the second one controls the SDRAM decoding window.
Two or three entries are expected (see the examples below):
the first one controls the devices decoding window,
the second one controls the SDRAM decoding window and
the third controls the MBus bridge (only with the
marvell,armada370-mbus and marvell,armadaxp-mbus
compatible strings)
Example:
@ -67,7 +70,7 @@ Example:
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
/* more children ...*/
@ -126,7 +129,7 @@ are skipped.
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
/* more children ...*/
@ -170,7 +173,7 @@ Using this macro, the above example would be:
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
/* other children */
@ -266,7 +269,7 @@ See the example below, where a more complete device tree is shown:
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
mbusc: mbus-controller@20000 {
reg = <0x20000 0x100>, <0x20180 0x20>;
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
interrupt-controller@20000 {

View File

@ -0,0 +1,21 @@
Device Tree bindings for MVEBU SDRAM controllers
The Marvell EBU SoCs all have a SDRAM controller. The SDRAM controller
differs from one SoC variant to another, but they also share a number
of commonalities.
For now, this Device Tree binding documentation only documents the
Armada XP SDRAM controller.
Required properties:
- compatible: for Armada XP, "marvell,armada-xp-sdram-controller"
- reg: a resource specifier for the register space, which should
include all SDRAM controller registers as per the datasheet.
Example:
sdramc@1400 {
compatible = "marvell,armada-xp-sdram-controller";
reg = <0x1400 0x500>;
};

View File

@ -180,7 +180,8 @@
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
reg = <0x20000 0x100>, <0x20180 0x20>,
<0x20250 0x8>;
};
mpic: interrupt-controller@20000 {

View File

@ -23,6 +23,7 @@
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-xp-mv78460.dtsi"
/ {
@ -48,6 +49,14 @@
<0x00000001 0x00000000 0x00000001 0x00000000>;
};
cpus {
pm_pic {
ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
<&gpio0 17 GPIO_ACTIVE_LOW>,
<&gpio0 18 GPIO_ACTIVE_LOW>;
};
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
@ -115,7 +124,15 @@
serial@12300 {
status = "okay";
};
pinctrl {
pinctrl-0 = <&pic_pins>;
pinctrl-names = "default";
pic_pins: pic-pins-0 {
marvell,pins = "mpp16", "mpp17",
"mpp18";
marvell,function = "gpio";
};
};
sata@a0000 {
nr-ports = <2>;
status = "okay";

View File

@ -35,6 +35,11 @@
};
internal-regs {
sdramc@1400 {
compatible = "marvell,armada-xp-sdram-controller";
reg = <0x1400 0x500>;
};
L2: l2-cache {
compatible = "marvell,aurora-system-cache";
reg = <0x08000 0x1000>;

View File

@ -7,7 +7,7 @@ CFLAGS_pmsu.o := -march=armv7-a
obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o
ifeq ($(CONFIG_MACH_MVEBU_V7),y)
obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o pm.o pm-board.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
endif

View File

@ -16,10 +16,12 @@
#include <linux/init.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/memblock.h>
#include <linux/mbus.h>
#include <linux/signal.h>
#include <linux/slab.h>
@ -56,6 +58,54 @@ void __iomem *mvebu_get_scu_base(void)
return scu_base;
}
/*
* When returning from suspend, the platform goes through the
* bootloader, which executes its DDR3 training code. This code has
* the unfortunate idea of using the first 10 KB of each DRAM bank to
* exercise the RAM and calculate the optimal timings. Therefore, this
* area of RAM is overwritten, and shouldn't be used by the kernel if
* suspend/resume is supported.
*/
#ifdef CONFIG_SUSPEND
#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K)
static int __init mvebu_scan_mem(unsigned long node, const char *uname,
int depth, void *data)
{
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
const __be32 *reg, *endp;
int l;
if (type == NULL || strcmp(type, "memory"))
return 0;
reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
if (reg == NULL)
reg = of_get_flat_dt_prop(node, "reg", &l);
if (reg == NULL)
return 0;
endp = reg + (l / sizeof(__be32));
while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
u64 base, size;
base = dt_mem_next_cell(dt_root_addr_cells, &reg);
size = dt_mem_next_cell(dt_root_size_cells, &reg);
memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
}
return 0;
}
static void __init mvebu_memblock_reserve(void)
{
of_scan_flat_dt(mvebu_scan_mem, NULL);
}
#else
static void __init mvebu_memblock_reserve(void) {}
#endif
/*
* Early versions of Armada 375 SoC have a bug where the BootROM
* leaves an external data abort pending. The kernel is hit by this
@ -151,6 +201,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
.init_machine = mvebu_dt_init,
.init_irq = mvebu_init_irq,
.restart = mvebu_restart,
.reserve = mvebu_memblock_reserve,
.dt_compat = armada_370_xp_dt_compat,
MACHINE_END

View File

@ -25,4 +25,6 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev);
void __iomem *mvebu_get_scu_base(void);
int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd));
#endif

View File

@ -35,7 +35,7 @@
#define AXP_BOOTROM_BASE 0xfff00000
#define AXP_BOOTROM_SIZE 0x100000
static struct clk *__init get_cpu_clk(int cpu)
static struct clk *get_cpu_clk(int cpu)
{
struct clk *cpu_clk;
struct device_node *np = of_get_cpu_node(cpu, NULL);
@ -48,29 +48,28 @@ static struct clk *__init get_cpu_clk(int cpu)
return cpu_clk;
}
static void __init set_secondary_cpus_clock(void)
static void set_secondary_cpu_clock(unsigned int cpu)
{
int thiscpu, cpu;
int thiscpu;
unsigned long rate;
struct clk *cpu_clk;
thiscpu = smp_processor_id();
thiscpu = get_cpu();
cpu_clk = get_cpu_clk(thiscpu);
if (!cpu_clk)
return;
goto out;
clk_prepare_enable(cpu_clk);
rate = clk_get_rate(cpu_clk);
/* set all the other CPU clk to the same rate than the boot CPU */
for_each_possible_cpu(cpu) {
if (cpu == thiscpu)
continue;
cpu_clk = get_cpu_clk(cpu);
if (!cpu_clk)
return;
goto out;
clk_set_rate(cpu_clk, rate);
clk_prepare_enable(cpu_clk);
}
out:
put_cpu();
}
static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
@ -80,6 +79,7 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
pr_info("Booting CPU %d\n", cpu);
hw_cpu = cpu_logical_map(cpu);
set_secondary_cpu_clock(hw_cpu);
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
/*
@ -128,7 +128,6 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
struct resource res;
int err;
set_secondary_cpus_clock();
flush_cache_all();
set_cpu_coherent();

View File

@ -0,0 +1,141 @@
/*
* Board-level suspend/resume support.
*
* Copyright (C) 2014 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
#include "common.h"
#define ARMADA_XP_GP_PIC_NR_GPIOS 3
static void __iomem *gpio_ctrl;
static int pic_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
static int pic_raw_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
{
u32 reg, ackcmd;
int i;
/* Put 001 as value on the GPIOs */
reg = readl(gpio_ctrl);
for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
reg &= ~BIT(pic_raw_gpios[i]);
reg |= BIT(pic_raw_gpios[0]);
writel(reg, gpio_ctrl);
/* Prepare writing 111 to the GPIOs */
ackcmd = readl(gpio_ctrl);
for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
ackcmd |= BIT(pic_raw_gpios[i]);
/*
* Wait a while, the PIC needs quite a bit of time between the
* two GPIO commands.
*/
mdelay(3000);
asm volatile (
/* Align to a cache line */
".balign 32\n\t"
/* Enter self refresh */
"str %[srcmd], [%[sdram_reg]]\n\t"
/*
* Wait 100 cycles for DDR to enter self refresh, by
* doing 50 times two instructions.
*/
"mov r1, #50\n\t"
"1: subs r1, r1, #1\n\t"
"bne 1b\n\t"
/* Issue the command ACK */
"str %[ackcmd], [%[gpio_ctrl]]\n\t"
/* Trap the processor */
"b .\n\t"
: : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg),
[ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1");
}
static int mvebu_armada_xp_gp_pm_init(void)
{
struct device_node *np;
struct device_node *gpio_ctrl_np;
int ret = 0, i;
if (!of_machine_is_compatible("marvell,axp-gp"))
return -ENODEV;
np = of_find_node_by_name(NULL, "pm_pic");
if (!np)
return -ENODEV;
for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++) {
char *name;
struct of_phandle_args args;
pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
if (pic_gpios[i] < 0) {
ret = -ENODEV;
goto out;
}
name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
if (!name) {
ret = -ENOMEM;
goto out;
}
ret = gpio_request(pic_gpios[i], name);
if (ret < 0) {
kfree(name);
goto out;
}
ret = gpio_direction_output(pic_gpios[i], 0);
if (ret < 0) {
gpio_free(pic_gpios[i]);
kfree(name);
goto out;
}
ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
i, &args);
if (ret < 0) {
gpio_free(pic_gpios[i]);
kfree(name);
goto out;
}
gpio_ctrl_np = args.np;
pic_raw_gpios[i] = args.args[0];
}
gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
if (!gpio_ctrl)
return -ENOMEM;
mvebu_pm_init(mvebu_armada_xp_gp_pm_enter);
out:
of_node_put(np);
return ret;
}
late_initcall(mvebu_armada_xp_gp_pm_init);

218
arch/arm/mach-mvebu/pm.c Normal file
View File

@ -0,0 +1,218 @@
/*
* Suspend/resume support. Currently supporting Armada XP only.
*
* Copyright (C) 2014 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mbus.h>
#include <linux/of_address.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/outercache.h>
#include <asm/suspend.h>
#include "coherency.h"
#include "pmsu.h"
#define SDRAM_CONFIG_OFFS 0x0
#define SDRAM_CONFIG_SR_MODE_BIT BIT(24)
#define SDRAM_OPERATION_OFFS 0x18
#define SDRAM_OPERATION_SELF_REFRESH 0x7
#define SDRAM_DLB_EVICTION_OFFS 0x30c
#define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff
static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
static void __iomem *sdram_ctrl;
static int mvebu_pm_powerdown(unsigned long data)
{
u32 reg, srcmd;
flush_cache_all();
outer_flush_all();
/*
* Issue a Data Synchronization Barrier instruction to ensure
* that all state saving has been completed.
*/
dsb();
/* Flush the DLB and wait ~7 usec */
reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
udelay(7);
/* Set DRAM in battery backup mode */
reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);
/* Prepare to go to self-refresh */
srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
srcmd &= ~0x1F;
srcmd |= SDRAM_OPERATION_SELF_REFRESH;
mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);
return 0;
}
#define BOOT_INFO_ADDR 0x3000
#define BOOT_MAGIC_WORD 0xdeadb002
#define BOOT_MAGIC_LIST_END 0xffffffff
/*
* Those registers are accessed before switching the internal register
* base, which is why we hardcode the 0xd0000000 base address, the one
* used by the SoC out of reset.
*/
#define MBUS_WINDOW_12_CTRL 0xd00200b0
#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080
#define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x))
#define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x))
static phys_addr_t mvebu_internal_reg_base(void)
{
struct device_node *np;
__be32 in_addr[2];
np = of_find_node_by_name(NULL, "internal-regs");
BUG_ON(!np);
/*
* Ask the DT what is the internal register address on this
* platform. In the mvebu-mbus DT binding, 0xf0010000
* corresponds to the internal register window.
*/
in_addr[0] = cpu_to_be32(0xf0010000);
in_addr[1] = 0x0;
return of_translate_address(np, in_addr);
}
static void mvebu_pm_store_bootinfo(void)
{
u32 *store_addr;
phys_addr_t resume_pc;
store_addr = phys_to_virt(BOOT_INFO_ADDR);
resume_pc = virt_to_phys(armada_370_xp_cpu_resume);
/*
* The bootloader expects the first two words to be a magic
* value (BOOT_MAGIC_WORD), followed by the address of the
* resume code to jump to. Then, it expects a sequence of
* (address, value) pairs, which can be used to restore the
* value of certain registers. This sequence must end with the
* BOOT_MAGIC_LIST_END magic value.
*/
writel(BOOT_MAGIC_WORD, store_addr++);
writel(resume_pc, store_addr++);
/*
* Some platforms remap their internal register base address
* to 0xf1000000. However, out of reset, window 12 starts at
* 0xf0000000 and ends at 0xf7ffffff, which would overlap with
* the internal registers. Therefore, disable window 12.
*/
writel(MBUS_WINDOW_12_CTRL, store_addr++);
writel(0x0, store_addr++);
/*
* Set the internal register base address to the value
* expected by Linux, as read from the Device Tree.
*/
writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
writel(mvebu_internal_reg_base(), store_addr++);
/*
* Ask the mvebu-mbus driver to store the SDRAM window
* configuration, which has to be restored by the bootloader
* before re-entering the kernel on resume.
*/
store_addr += mvebu_mbus_save_cpu_target(store_addr);
writel(BOOT_MAGIC_LIST_END, store_addr);
}
static int mvebu_pm_enter(suspend_state_t state)
{
if (state != PM_SUSPEND_MEM)
return -EINVAL;
cpu_pm_enter();
mvebu_pm_store_bootinfo();
cpu_suspend(0, mvebu_pm_powerdown);
outer_resume();
mvebu_v7_pmsu_idle_exit();
set_cpu_coherent();
cpu_pm_exit();
return 0;
}
static const struct platform_suspend_ops mvebu_pm_ops = {
.enter = mvebu_pm_enter,
.valid = suspend_valid_only_mem,
};
int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd))
{
struct device_node *np;
struct resource res;
if (!of_machine_is_compatible("marvell,armadaxp"))
return -ENODEV;
np = of_find_compatible_node(NULL, NULL,
"marvell,armada-xp-sdram-controller");
if (!np)
return -ENODEV;
if (of_address_to_resource(np, 0, &res)) {
of_node_put(np);
return -ENODEV;
}
if (!request_mem_region(res.start, resource_size(&res),
np->full_name)) {
of_node_put(np);
return -EBUSY;
}
sdram_ctrl = ioremap(res.start, resource_size(&res));
if (!sdram_ctrl) {
release_mem_region(res.start, resource_size(&res));
of_node_put(np);
return -ENOMEM;
}
of_node_put(np);
mvebu_board_pm_enter = board_pm_enter;
suspend_set_ops(&mvebu_pm_ops);
return 0;
}

View File

@ -17,6 +17,7 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
phys_addr_t resume_addr_reg);
void mvebu_v7_pmsu_idle_exit(void);
void armada_370_xp_cpu_resume(void);
int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
int armada_38x_do_cpu_suspend(unsigned long deepidle);

View File

@ -30,6 +30,14 @@ ENDPROC(armada_38x_scu_power_up)
*/
ENTRY(armada_370_xp_cpu_resume)
ARM_BE8(setend be ) @ go BE8 if entered LE
/*
* Disable the MMU that might have been enabled in BootROM if
* this code is used in the resume path of a suspend/resume
* cycle.
*/
mrc p15, 0, r1, c1, c0, 0
bic r1, #1
mcr p15, 0, r1, c1, c0, 0
bl ll_add_cpu_to_smp_group
bl ll_enable_coherency
b cpu_resume

View File

@ -57,6 +57,7 @@
#include <linux/of_address.h>
#include <linux/debugfs.h>
#include <linux/log2.h>
#include <linux/syscore_ops.h>
/*
* DDR target is the same on all platforms.
@ -94,20 +95,42 @@
#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
/* Relative to mbusbridge_base */
#define MBUS_BRIDGE_CTRL_OFF 0x0
#define MBUS_BRIDGE_BASE_OFF 0x4
/* Maximum number of windows, for all known platforms */
#define MBUS_WINS_MAX 20
struct mvebu_mbus_state;
struct mvebu_mbus_soc_data {
unsigned int num_wins;
unsigned int num_remappable_wins;
bool has_mbus_bridge;
unsigned int (*win_cfg_offset)(const int win);
void (*setup_cpu_target)(struct mvebu_mbus_state *s);
int (*save_cpu_target)(struct mvebu_mbus_state *s,
u32 *store_addr);
int (*show_cpu_target)(struct mvebu_mbus_state *s,
struct seq_file *seq, void *v);
};
/*
* Used to store the state of one MBus window accross suspend/resume.
*/
struct mvebu_mbus_win_data {
u32 ctrl;
u32 base;
u32 remap_lo;
u32 remap_hi;
};
struct mvebu_mbus_state {
void __iomem *mbuswins_base;
void __iomem *sdramwins_base;
void __iomem *mbusbridge_base;
phys_addr_t sdramwins_phys_base;
struct dentry *debugfs_root;
struct dentry *debugfs_sdram;
struct dentry *debugfs_devs;
@ -115,6 +138,11 @@ struct mvebu_mbus_state {
struct resource pcie_io_aperture;
const struct mvebu_mbus_soc_data *soc;
int hw_io_coherency;
/* Used during suspend/resume */
u32 mbus_bridge_ctrl;
u32 mbus_bridge_base;
struct mvebu_mbus_win_data wins[MBUS_WINS_MAX];
};
static struct mvebu_mbus_state mbus_state;
@ -516,6 +544,28 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
mvebu_mbus_dram_info.num_cs = cs;
}
static int
mvebu_mbus_default_save_cpu_target(struct mvebu_mbus_state *mbus,
u32 *store_addr)
{
int i;
for (i = 0; i < 4; i++) {
u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
writel(mbus->sdramwins_phys_base + DDR_BASE_CS_OFF(i),
store_addr++);
writel(base, store_addr++);
writel(mbus->sdramwins_phys_base + DDR_SIZE_CS_OFF(i),
store_addr++);
writel(size, store_addr++);
}
/* We've written 16 words to the store address */
return 16;
}
static void __init
mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
{
@ -546,10 +596,35 @@ mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
mvebu_mbus_dram_info.num_cs = cs;
}
static int
mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus,
u32 *store_addr)
{
int i;
for (i = 0; i < 2; i++) {
u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
writel(mbus->sdramwins_phys_base + DOVE_DDR_BASE_CS_OFF(i),
store_addr++);
writel(map, store_addr++);
}
/* We've written 4 words to the store address */
return 4;
}
int mvebu_mbus_save_cpu_target(u32 *store_addr)
{
return mbus_state.soc->save_cpu_target(&mbus_state, store_addr);
}
static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = {
.num_wins = 20,
.num_remappable_wins = 8,
.has_mbus_bridge = true,
.win_cfg_offset = armada_370_xp_mbus_win_offset,
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
@ -558,6 +633,7 @@ static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
.num_wins = 8,
.num_remappable_wins = 4,
.win_cfg_offset = orion_mbus_win_offset,
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
@ -566,6 +642,7 @@ static const struct mvebu_mbus_soc_data dove_mbus_data = {
.num_wins = 8,
.num_remappable_wins = 4,
.win_cfg_offset = orion_mbus_win_offset,
.save_cpu_target = mvebu_mbus_dove_save_cpu_target,
.setup_cpu_target = mvebu_mbus_dove_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_dove,
};
@ -578,6 +655,7 @@ static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = {
.num_wins = 8,
.num_remappable_wins = 4,
.win_cfg_offset = orion_mbus_win_offset,
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
@ -586,6 +664,7 @@ static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
.num_wins = 8,
.num_remappable_wins = 2,
.win_cfg_offset = orion_mbus_win_offset,
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
@ -594,6 +673,7 @@ static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
.num_wins = 14,
.num_remappable_wins = 8,
.win_cfg_offset = mv78xx0_mbus_win_offset,
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
@ -698,11 +778,73 @@ static __init int mvebu_mbus_debugfs_init(void)
}
fs_initcall(mvebu_mbus_debugfs_init);
static int mvebu_mbus_suspend(void)
{
struct mvebu_mbus_state *s = &mbus_state;
int win;
if (!s->mbusbridge_base)
return -ENODEV;
for (win = 0; win < s->soc->num_wins; win++) {
void __iomem *addr = s->mbuswins_base +
s->soc->win_cfg_offset(win);
s->wins[win].base = readl(addr + WIN_BASE_OFF);
s->wins[win].ctrl = readl(addr + WIN_CTRL_OFF);
if (win >= s->soc->num_remappable_wins)
continue;
s->wins[win].remap_lo = readl(addr + WIN_REMAP_LO_OFF);
s->wins[win].remap_hi = readl(addr + WIN_REMAP_HI_OFF);
}
s->mbus_bridge_ctrl = readl(s->mbusbridge_base +
MBUS_BRIDGE_CTRL_OFF);
s->mbus_bridge_base = readl(s->mbusbridge_base +
MBUS_BRIDGE_BASE_OFF);
return 0;
}
static void mvebu_mbus_resume(void)
{
struct mvebu_mbus_state *s = &mbus_state;
int win;
writel(s->mbus_bridge_ctrl,
s->mbusbridge_base + MBUS_BRIDGE_CTRL_OFF);
writel(s->mbus_bridge_base,
s->mbusbridge_base + MBUS_BRIDGE_BASE_OFF);
for (win = 0; win < s->soc->num_wins; win++) {
void __iomem *addr = s->mbuswins_base +
s->soc->win_cfg_offset(win);
writel(s->wins[win].base, addr + WIN_BASE_OFF);
writel(s->wins[win].ctrl, addr + WIN_CTRL_OFF);
if (win >= s->soc->num_remappable_wins)
continue;
writel(s->wins[win].remap_lo, addr + WIN_REMAP_LO_OFF);
writel(s->wins[win].remap_hi, addr + WIN_REMAP_HI_OFF);
}
}
struct syscore_ops mvebu_mbus_syscore_ops = {
.suspend = mvebu_mbus_suspend,
.resume = mvebu_mbus_resume,
};
static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
phys_addr_t mbuswins_phys_base,
size_t mbuswins_size,
phys_addr_t sdramwins_phys_base,
size_t sdramwins_size)
size_t sdramwins_size,
phys_addr_t mbusbridge_phys_base,
size_t mbusbridge_size)
{
int win;
@ -716,11 +858,26 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
return -ENOMEM;
}
mbus->sdramwins_phys_base = sdramwins_phys_base;
if (mbusbridge_phys_base) {
mbus->mbusbridge_base = ioremap(mbusbridge_phys_base,
mbusbridge_size);
if (!mbus->mbusbridge_base) {
iounmap(mbus->sdramwins_base);
iounmap(mbus->mbuswins_base);
return -ENOMEM;
}
} else
mbus->mbusbridge_base = NULL;
for (win = 0; win < mbus->soc->num_wins; win++)
mvebu_mbus_disable_window(mbus, win);
mbus->soc->setup_cpu_target(mbus);
register_syscore_ops(&mvebu_mbus_syscore_ops);
return 0;
}
@ -746,7 +903,7 @@ int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
mbuswins_phys_base,
mbuswins_size,
sdramwins_phys_base,
sdramwins_size);
sdramwins_size, 0, 0);
}
#ifdef CONFIG_OF
@ -887,7 +1044,7 @@ static void __init mvebu_mbus_get_pcie_resources(struct device_node *np,
int __init mvebu_mbus_dt_init(bool is_coherent)
{
struct resource mbuswins_res, sdramwins_res;
struct resource mbuswins_res, sdramwins_res, mbusbridge_res;
struct device_node *np, *controller;
const struct of_device_id *of_id;
const __be32 *prop;
@ -923,6 +1080,19 @@ int __init mvebu_mbus_dt_init(bool is_coherent)
return -EINVAL;
}
/*
* Set the resource to 0 so that it can be left unmapped by
* mvebu_mbus_common_init() if the DT doesn't carry the
* necessary information. This is needed to preserve backward
* compatibility.
*/
memset(&mbusbridge_res, 0, sizeof(mbusbridge_res));
if (mbus_state.soc->has_mbus_bridge) {
if (of_address_to_resource(controller, 2, &mbusbridge_res))
pr_warn(FW_WARN "deprecated mbus-mvebu Device Tree, suspend/resume will not work\n");
}
mbus_state.hw_io_coherency = is_coherent;
/* Get optional pcie-{mem,io}-aperture properties */
@ -933,7 +1103,9 @@ int __init mvebu_mbus_dt_init(bool is_coherent)
mbuswins_res.start,
resource_size(&mbuswins_res),
sdramwins_res.start,
resource_size(&sdramwins_res));
resource_size(&sdramwins_res),
mbusbridge_res.start,
resource_size(&mbusbridge_res));
if (ret)
return ret;

View File

@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
#include "common.h"
@ -177,14 +178,17 @@ struct clk_gating_ctrl {
spinlock_t *lock;
struct clk **gates;
int num_gates;
void __iomem *base;
u32 saved_reg;
};
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
static struct clk_gating_ctrl *ctrl;
static struct clk *clk_gating_get_src(
struct of_phandle_args *clkspec, void *data)
{
struct clk_gating_ctrl *ctrl = (struct clk_gating_ctrl *)data;
int n;
if (clkspec->args_count < 1)
@ -199,15 +203,35 @@ static struct clk *clk_gating_get_src(
return ERR_PTR(-ENODEV);
}
static int mvebu_clk_gating_suspend(void)
{
ctrl->saved_reg = readl(ctrl->base);
return 0;
}
static void mvebu_clk_gating_resume(void)
{
writel(ctrl->saved_reg, ctrl->base);
}
static struct syscore_ops clk_gate_syscore_ops = {
.suspend = mvebu_clk_gating_suspend,
.resume = mvebu_clk_gating_resume,
};
void __init mvebu_clk_gating_setup(struct device_node *np,
const struct clk_gating_soc_desc *desc)
{
struct clk_gating_ctrl *ctrl;
struct clk *clk;
void __iomem *base;
const char *default_parent = NULL;
int n;
if (ctrl) {
pr_err("mvebu-clk-gating: cannot instantiate more than one gatable clock device\n");
return;
}
base = of_iomap(np, 0);
if (WARN_ON(!base))
return;
@ -225,6 +249,8 @@ void __init mvebu_clk_gating_setup(struct device_node *np,
/* lock must already be initialized */
ctrl->lock = &ctrl_gating_lock;
ctrl->base = base;
/* Count, allocate, and register clock gates */
for (n = 0; desc[n].name;)
n++;
@ -246,6 +272,8 @@ void __init mvebu_clk_gating_setup(struct device_node *np,
of_clk_add_provider(np, clk_gating_get_src, ctrl);
register_syscore_ops(&clk_gate_syscore_ops);
return;
gates_out:
kfree(ctrl);

View File

@ -43,6 +43,7 @@
#include <linux/module.h>
#include <linux/sched_clock.h>
#include <linux/percpu.h>
#include <linux/syscore_ops.h>
/*
* Timer block registers.
@ -223,6 +224,28 @@ static struct notifier_block armada_370_xp_timer_cpu_nb = {
.notifier_call = armada_370_xp_timer_cpu_notify,
};
static u32 timer0_ctrl_reg, timer0_local_ctrl_reg;
static int armada_370_xp_timer_suspend(void)
{
timer0_ctrl_reg = readl(timer_base + TIMER_CTRL_OFF);
timer0_local_ctrl_reg = readl(local_base + TIMER_CTRL_OFF);
return 0;
}
static void armada_370_xp_timer_resume(void)
{
writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
writel(timer0_ctrl_reg, timer_base + TIMER_CTRL_OFF);
writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF);
}
struct syscore_ops armada_370_xp_timer_syscore_ops = {
.suspend = armada_370_xp_timer_suspend,
.resume = armada_370_xp_timer_resume,
};
static void __init armada_370_xp_timer_common_init(struct device_node *np)
{
u32 clr = 0, set = 0;
@ -285,6 +308,8 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
/* Immediately configure the timer on the boot CPU */
if (!res)
armada_370_xp_timer_setup(this_cpu_ptr(armada_370_xp_evt));
register_syscore_ops(&armada_370_xp_timer_syscore_ops);
}
static void __init armada_xp_timer_init(struct device_node *np)

View File

@ -26,6 +26,7 @@
#include <linux/of_pci.h>
#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/msi.h>
#include <asm/mach/arch.h>
#include <asm/exception.h>
@ -66,6 +67,7 @@
static void __iomem *per_cpu_int_base;
static void __iomem *main_int_base;
static struct irq_domain *armada_370_xp_mpic_domain;
static u32 doorbell_mask_reg;
#ifdef CONFIG_PCI_MSI
static struct irq_domain *armada_370_xp_msi_domain;
static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR);
@ -474,6 +476,54 @@ armada_370_xp_handle_irq(struct pt_regs *regs)
} while (1);
}
static int armada_370_xp_mpic_suspend(void)
{
doorbell_mask_reg = readl(per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
return 0;
}
static void armada_370_xp_mpic_resume(void)
{
int nirqs;
irq_hw_number_t irq;
/* Re-enable interrupts */
nirqs = (readl(main_int_base + ARMADA_370_XP_INT_CONTROL) >> 2) & 0x3ff;
for (irq = 0; irq < nirqs; irq++) {
struct irq_data *data;
int virq;
virq = irq_linear_revmap(armada_370_xp_mpic_domain, irq);
if (virq == 0)
continue;
if (irq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(irq, per_cpu_int_base +
ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
else
writel(irq, main_int_base +
ARMADA_370_XP_INT_SET_ENABLE_OFFS);
data = irq_get_irq_data(virq);
if (!irqd_irq_disabled(data))
armada_370_xp_irq_unmask(data);
}
/* Reconfigure doorbells for IPIs and MSIs */
writel(doorbell_mask_reg,
per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
if (doorbell_mask_reg & IPI_DOORBELL_MASK)
writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
if (doorbell_mask_reg & PCI_MSI_DOORBELL_MASK)
writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
}
struct syscore_ops armada_370_xp_mpic_syscore_ops = {
.suspend = armada_370_xp_mpic_suspend,
.resume = armada_370_xp_mpic_resume,
};
static int __init armada_370_xp_mpic_of_init(struct device_node *node,
struct device_node *parent)
{
@ -530,6 +580,8 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
armada_370_xp_mpic_handle_cascade_irq);
}
register_syscore_ops(&armada_370_xp_mpic_syscore_ops);
return 0;
}

View File

@ -61,6 +61,7 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
}
#endif
int mvebu_mbus_save_cpu_target(u32 *store_addr);
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
int mvebu_mbus_add_window_remap_by_id(unsigned int target,