hpt366: cache channel's MCR address
Begin the real driver redesign. For the starters: - cache the offset of the IDE channel's MISC. control registers which are used throughout the driver in hwif->select_data; - only touch the relevant MCR when detecting the cable type on HPT374's function 1; - make HPT36x's speedproc handler look the same way as HPT37x ones; fix the PIO timing register mask for HPT37x. - rename all the HPT3xx register related variables consistently; clean up the whitespace. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
b4586715d7
commit
abc4ad4c6b
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/drivers/ide/pci/hpt366.c Version 0.45 May 27, 2006
|
||||
* linux/drivers/ide/pci/hpt366.c Version 0.50 May 28, 2006
|
||||
*
|
||||
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
|
||||
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
|
||||
|
@ -80,6 +80,11 @@
|
|||
* - claim the extra 240 bytes of I/O space for all chips
|
||||
* - optimize the rate masking/filtering and the drive list lookup code
|
||||
* - use pci_get_slot() to get to the function 1 of HPT36x/374
|
||||
* - cache the channel's MCRs' offset; only touch the relevant MCR when detecting
|
||||
* the cable type on HPT374's function 1
|
||||
* - rename all the register related variables consistently
|
||||
* - make HPT36x's speedproc handler look the same way as HPT37x ones; fix the
|
||||
* PIO timing register mask for HPT37x
|
||||
* <source@mvista.com>
|
||||
*
|
||||
*/
|
||||
|
@ -497,109 +502,106 @@ static u32 pci_bus_clock_list(u8 speed, u32 *chipset_table)
|
|||
|
||||
static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
|
||||
u8 regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40;
|
||||
u8 regfast = (hwif->channel) ? 0x55 : 0x51;
|
||||
u8 drive_fast = 0;
|
||||
u32 reg1 = 0, reg2 = 0;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata (hwif);
|
||||
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
|
||||
u8 itr_addr = drive->dn ? 0x44 : 0x40;
|
||||
u8 mcr_addr = hwif->select_data + 1;
|
||||
u8 mcr = 0;
|
||||
u32 new_itr, old_itr = 0;
|
||||
u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x30070000 : 0xc0000000;
|
||||
|
||||
/*
|
||||
* Disable the "fast interrupt" prediction.
|
||||
*/
|
||||
pci_read_config_byte(dev, regfast, &drive_fast);
|
||||
if (drive_fast & 0x80)
|
||||
pci_write_config_byte(dev, regfast, drive_fast & ~0x80);
|
||||
pci_read_config_byte(dev, mcr_addr, &mcr);
|
||||
if (mcr & 0x80)
|
||||
pci_write_config_byte(dev, mcr_addr, mcr & ~0x80);
|
||||
|
||||
reg2 = pci_bus_clock_list(speed, info->speed);
|
||||
new_itr = pci_bus_clock_list(speed, info->speed);
|
||||
|
||||
/*
|
||||
* Disable on-chip PIO FIFO/buffer
|
||||
* (to avoid problems handling I/O errors later)
|
||||
* Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
|
||||
* to avoid problems handling I/O errors later
|
||||
*/
|
||||
pci_read_config_dword(dev, regtime, ®1);
|
||||
if (speed >= XFER_MW_DMA_0) {
|
||||
reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000);
|
||||
} else {
|
||||
reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000);
|
||||
}
|
||||
reg2 &= ~0x80000000;
|
||||
pci_read_config_dword(dev, itr_addr, &old_itr);
|
||||
new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
|
||||
new_itr &= ~0xc0000000;
|
||||
|
||||
pci_write_config_dword(dev, regtime, reg2);
|
||||
pci_write_config_dword(dev, itr_addr, new_itr);
|
||||
|
||||
return ide_config_drive_speed(drive, speed);
|
||||
}
|
||||
|
||||
static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
|
||||
u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51;
|
||||
u8 drive_pci = 0x40 + (drive->dn * 4);
|
||||
u8 new_fast = 0, drive_fast = 0;
|
||||
u32 list_conf = 0, drive_conf = 0;
|
||||
u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata (hwif);
|
||||
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
|
||||
u8 mcr_addr = hwif->select_data + 1;
|
||||
u8 itr_addr = 0x40 + (drive->dn * 4);
|
||||
u8 new_mcr = 0, old_mcr = 0;
|
||||
u32 new_itr, old_itr = 0;
|
||||
u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x303c0000 : 0xc0000000;
|
||||
|
||||
/*
|
||||
* Disable the "fast interrupt" prediction.
|
||||
* don't holdoff on interrupts. (== 0x01 despite what the docs say)
|
||||
*/
|
||||
pci_read_config_byte(dev, regfast, &drive_fast);
|
||||
new_fast = drive_fast;
|
||||
if (new_fast & 0x02)
|
||||
new_fast &= ~0x02;
|
||||
pci_read_config_byte(dev, mcr_addr, &old_mcr);
|
||||
new_mcr = old_mcr;
|
||||
if (new_mcr & 0x02)
|
||||
new_mcr &= ~0x02;
|
||||
|
||||
#ifdef HPT_DELAY_INTERRUPT
|
||||
if (new_fast & 0x01)
|
||||
new_fast &= ~0x01;
|
||||
if (new_mcr & 0x01)
|
||||
new_mcr &= ~0x01;
|
||||
#else
|
||||
if ((new_fast & 0x01) == 0)
|
||||
new_fast |= 0x01;
|
||||
if ((new_mcr & 0x01) == 0)
|
||||
new_mcr |= 0x01;
|
||||
#endif
|
||||
if (new_fast != drive_fast)
|
||||
pci_write_config_byte(dev, regfast, new_fast);
|
||||
if (new_mcr != old_mcr)
|
||||
pci_write_config_byte(dev, mcr_addr, new_mcr);
|
||||
|
||||
list_conf = pci_bus_clock_list(speed, info->speed);
|
||||
new_itr = pci_bus_clock_list(speed, info->speed);
|
||||
|
||||
pci_read_config_dword(dev, drive_pci, &drive_conf);
|
||||
list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
|
||||
pci_read_config_dword(dev, itr_addr, &old_itr);
|
||||
new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
|
||||
|
||||
if (speed < XFER_MW_DMA_0)
|
||||
list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
|
||||
pci_write_config_dword(dev, drive_pci, list_conf);
|
||||
new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
|
||||
pci_write_config_dword(dev, itr_addr, new_itr);
|
||||
|
||||
return ide_config_drive_speed(drive, speed);
|
||||
}
|
||||
|
||||
static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
|
||||
u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51;
|
||||
u8 drive_fast = 0, drive_pci = 0x40 + (drive->dn * 4);
|
||||
u32 list_conf = 0, drive_conf = 0;
|
||||
u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata (hwif);
|
||||
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
|
||||
u8 mcr_addr = hwif->select_data + 1;
|
||||
u8 itr_addr = 0x40 + (drive->dn * 4);
|
||||
u8 mcr = 0;
|
||||
u32 new_itr, old_itr = 0;
|
||||
u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x303c0000 : 0xc0000000;
|
||||
|
||||
/*
|
||||
* Disable the "fast interrupt" prediction.
|
||||
* don't holdoff on interrupts. (== 0x01 despite what the docs say)
|
||||
*/
|
||||
pci_read_config_byte(dev, regfast, &drive_fast);
|
||||
drive_fast &= ~0x07;
|
||||
pci_write_config_byte(dev, regfast, drive_fast);
|
||||
pci_read_config_byte (dev, mcr_addr, &mcr);
|
||||
pci_write_config_byte(dev, mcr_addr, (mcr & ~0x07));
|
||||
|
||||
list_conf = pci_bus_clock_list(speed, info->speed);
|
||||
pci_read_config_dword(dev, drive_pci, &drive_conf);
|
||||
list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
|
||||
new_itr = pci_bus_clock_list(speed, info->speed);
|
||||
pci_read_config_dword(dev, itr_addr, &old_itr);
|
||||
new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
|
||||
if (speed < XFER_MW_DMA_0)
|
||||
list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
|
||||
pci_write_config_dword(dev, drive_pci, list_conf);
|
||||
new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
|
||||
pci_write_config_dword(dev, itr_addr, new_itr);
|
||||
|
||||
return ide_config_drive_speed(drive, speed);
|
||||
}
|
||||
|
@ -666,39 +668,41 @@ static int hpt3xx_quirkproc(ide_drive_t *drive)
|
|||
|
||||
static void hpt3xx_intrproc (ide_drive_t *drive)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
|
||||
if (drive->quirk_list)
|
||||
return;
|
||||
/* drives in the quirk_list may not like intr setups/cleanups */
|
||||
hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG);
|
||||
hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
|
||||
}
|
||||
|
||||
static void hpt3xx_maskproc (ide_drive_t *drive, int mask)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
|
||||
if (drive->quirk_list) {
|
||||
if (info->revision >= 3) {
|
||||
u8 reg5a = 0;
|
||||
pci_read_config_byte(dev, 0x5a, ®5a);
|
||||
if (((reg5a & 0x10) >> 4) != mask)
|
||||
pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10));
|
||||
} else {
|
||||
if (mask) {
|
||||
disable_irq(hwif->irq);
|
||||
} else {
|
||||
enable_irq(hwif->irq);
|
||||
u8 scr1 = 0;
|
||||
|
||||
pci_read_config_byte(dev, 0x5a, &scr1);
|
||||
if (((scr1 & 0x10) >> 4) != mask) {
|
||||
if (mask)
|
||||
scr1 |= 0x10;
|
||||
else
|
||||
scr1 &= ~0x10;
|
||||
pci_write_config_byte(dev, 0x5a, scr1);
|
||||
}
|
||||
} else {
|
||||
if (mask)
|
||||
disable_irq(hwif->irq);
|
||||
else
|
||||
enable_irq (hwif->irq);
|
||||
}
|
||||
} else {
|
||||
if (IDE_CONTROL_REG)
|
||||
hwif->OUTB(mask ? (drive->ctl | 2) :
|
||||
(drive->ctl & ~2),
|
||||
IDE_CONTROL_REG);
|
||||
}
|
||||
} else
|
||||
hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
|
||||
IDE_CONTROL_REG);
|
||||
}
|
||||
|
||||
static int hpt366_config_drive_xfer_rate (ide_drive_t *drive)
|
||||
|
@ -727,28 +731,29 @@ fast_ata_pio:
|
|||
}
|
||||
|
||||
/*
|
||||
* This is specific to the HPT366 UDMA bios chipset
|
||||
* This is specific to the HPT366 UDMA chipset
|
||||
* by HighPoint|Triones Technologies, Inc.
|
||||
*/
|
||||
static int hpt366_ide_dma_lostirq (ide_drive_t *drive)
|
||||
static int hpt366_ide_dma_lostirq(ide_drive_t *drive)
|
||||
{
|
||||
struct pci_dev *dev = HWIF(drive)->pci_dev;
|
||||
u8 reg50h = 0, reg52h = 0, reg5ah = 0;
|
||||
struct pci_dev *dev = HWIF(drive)->pci_dev;
|
||||
u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
|
||||
|
||||
pci_read_config_byte(dev, 0x50, ®50h);
|
||||
pci_read_config_byte(dev, 0x52, ®52h);
|
||||
pci_read_config_byte(dev, 0x5a, ®5ah);
|
||||
printk("%s: (%s) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n",
|
||||
drive->name, __FUNCTION__, reg50h, reg52h, reg5ah);
|
||||
if (reg5ah & 0x10)
|
||||
pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
|
||||
pci_read_config_byte(dev, 0x50, &mcr1);
|
||||
pci_read_config_byte(dev, 0x52, &mcr3);
|
||||
pci_read_config_byte(dev, 0x5a, &scr1);
|
||||
printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
|
||||
drive->name, __FUNCTION__, mcr1, mcr3, scr1);
|
||||
if (scr1 & 0x10)
|
||||
pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
|
||||
return __ide_dma_lostirq(drive);
|
||||
}
|
||||
|
||||
static void hpt370_clear_engine (ide_drive_t *drive)
|
||||
{
|
||||
u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50;
|
||||
pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37);
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
|
||||
pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37);
|
||||
udelay(10);
|
||||
}
|
||||
|
||||
|
@ -780,10 +785,10 @@ static int hpt370_ide_dma_end (ide_drive_t *drive)
|
|||
static void hpt370_lostirq_timeout (ide_drive_t *drive)
|
||||
{
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
u8 bfifo = 0, reginfo = hwif->channel ? 0x56 : 0x52;
|
||||
u8 bfifo = 0;
|
||||
u8 dma_stat = 0, dma_cmd = 0;
|
||||
|
||||
pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo);
|
||||
pci_read_config_byte(HWIF(drive)->pci_dev, hwif->select_data + 2, &bfifo);
|
||||
printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo);
|
||||
hpt370_clear_engine(drive);
|
||||
/* get dma command mode */
|
||||
|
@ -814,10 +819,9 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
|
|||
{
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
u16 bfifo = 0;
|
||||
u8 reginfo = hwif->channel ? 0x56 : 0x52;
|
||||
u8 dma_stat;
|
||||
u8 dma_stat;
|
||||
|
||||
pci_read_config_word(hwif->pci_dev, reginfo, &bfifo);
|
||||
pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
|
||||
if (bfifo & 0x1FF) {
|
||||
// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
|
||||
return 0;
|
||||
|
@ -825,7 +829,7 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
|
|||
|
||||
dma_stat = hwif->INB(hwif->dma_status);
|
||||
/* return 1 if INTR asserted */
|
||||
if ((dma_stat & 4) == 4)
|
||||
if (dma_stat & 4)
|
||||
return 1;
|
||||
|
||||
if (!drive->waiting_for_dma)
|
||||
|
@ -834,17 +838,17 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int hpt374_ide_dma_end (ide_drive_t *drive)
|
||||
static int hpt374_ide_dma_end(ide_drive_t *drive)
|
||||
{
|
||||
struct pci_dev *dev = HWIF(drive)->pci_dev;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
u8 msc_stat = 0, mscreg = hwif->channel ? 0x54 : 0x50;
|
||||
u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01;
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
u8 mcr = 0, mcr_addr = hwif->select_data;
|
||||
u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
|
||||
|
||||
pci_read_config_byte(dev, 0x6a, &bwsr_stat);
|
||||
pci_read_config_byte(dev, mscreg, &msc_stat);
|
||||
if ((bwsr_stat & bwsr_mask) == bwsr_mask)
|
||||
pci_write_config_byte(dev, mscreg, msc_stat|0x30);
|
||||
pci_read_config_byte(dev, 0x6a, &bwsr);
|
||||
pci_read_config_byte(dev, mcr_addr, &mcr);
|
||||
if (bwsr & mask)
|
||||
pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
|
||||
return __ide_dma_end(drive);
|
||||
}
|
||||
|
||||
|
@ -910,6 +914,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
|
|||
|
||||
/*
|
||||
* Set/get power state for a drive.
|
||||
* NOTE: affects both drives on each channel.
|
||||
*
|
||||
* When we turn the power back on, we need to re-initialize things.
|
||||
*/
|
||||
|
@ -917,26 +922,18 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
|
|||
|
||||
static int hpt3xx_busproc(ide_drive_t *drive, int state)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
u8 tristate, resetmask, bus_reg = 0;
|
||||
u16 tri_reg = 0;
|
||||
u8 mcr_addr = hwif->select_data + 2;
|
||||
u8 resetmask = hwif->channel ? 0x80 : 0x40;
|
||||
u8 bsr2 = 0;
|
||||
u16 mcr = 0;
|
||||
|
||||
hwif->bus_state = state;
|
||||
|
||||
if (hwif->channel) {
|
||||
/* secondary channel */
|
||||
tristate = 0x56;
|
||||
resetmask = 0x80;
|
||||
} else {
|
||||
/* primary channel */
|
||||
tristate = 0x52;
|
||||
resetmask = 0x40;
|
||||
}
|
||||
|
||||
/* Grab the status. */
|
||||
pci_read_config_word(dev, tristate, &tri_reg);
|
||||
pci_read_config_byte(dev, 0x59, &bus_reg);
|
||||
pci_read_config_word(dev, mcr_addr, &mcr);
|
||||
pci_read_config_byte(dev, 0x59, &bsr2);
|
||||
|
||||
/*
|
||||
* Set the state. We don't set it if we don't need to do so.
|
||||
|
@ -944,22 +941,22 @@ static int hpt3xx_busproc(ide_drive_t *drive, int state)
|
|||
*/
|
||||
switch (state) {
|
||||
case BUSSTATE_ON:
|
||||
if (!(bus_reg & resetmask))
|
||||
if (!(bsr2 & resetmask))
|
||||
return 0;
|
||||
hwif->drives[0].failures = hwif->drives[1].failures = 0;
|
||||
|
||||
pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask);
|
||||
pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT);
|
||||
pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask);
|
||||
pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT);
|
||||
return 0;
|
||||
case BUSSTATE_OFF:
|
||||
if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT))
|
||||
if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT))
|
||||
return 0;
|
||||
tri_reg &= ~TRISTATE_BIT;
|
||||
mcr &= ~TRISTATE_BIT;
|
||||
break;
|
||||
case BUSSTATE_TRISTATE:
|
||||
if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT))
|
||||
if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT))
|
||||
return 0;
|
||||
tri_reg |= TRISTATE_BIT;
|
||||
mcr |= TRISTATE_BIT;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
|
@ -968,20 +965,20 @@ static int hpt3xx_busproc(ide_drive_t *drive, int state)
|
|||
hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
|
||||
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
|
||||
|
||||
pci_write_config_word(dev, tristate, tri_reg);
|
||||
pci_write_config_byte(dev, 0x59, bus_reg | resetmask);
|
||||
pci_write_config_word(dev, mcr_addr, mcr);
|
||||
pci_write_config_byte(dev, 0x59, bsr2 | resetmask);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __devinit hpt366_clocking(ide_hwif_t *hwif)
|
||||
{
|
||||
u32 reg1 = 0;
|
||||
u32 itr1 = 0;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
|
||||
pci_read_config_dword(hwif->pci_dev, 0x40, ®1);
|
||||
pci_read_config_dword(hwif->pci_dev, 0x40, &itr1);
|
||||
|
||||
/* detect bus speed by looking at control reg timing: */
|
||||
switch((reg1 >> 8) & 7) {
|
||||
switch((itr1 >> 8) & 7) {
|
||||
case 5:
|
||||
info->speed = forty_base_hpt36x;
|
||||
break;
|
||||
|
@ -1003,7 +1000,7 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
|
|||
int adjust, i;
|
||||
u16 freq = 0;
|
||||
u32 pll, temp = 0;
|
||||
u8 reg5bh = 0, mcr1 = 0;
|
||||
u8 scr2 = 0, mcr1 = 0;
|
||||
|
||||
/*
|
||||
* default to pci clock. make sure MA15/16 are set to output
|
||||
|
@ -1116,13 +1113,13 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
|
|||
|
||||
/* wait for clock stabilization */
|
||||
for (i = 0; i < 0x50000; i++) {
|
||||
pci_read_config_byte(dev, 0x5b, ®5bh);
|
||||
if (reg5bh & 0x80) {
|
||||
pci_read_config_byte(dev, 0x5b, &scr2);
|
||||
if (scr2 & 0x80) {
|
||||
/* spin looking for the clock to destabilize */
|
||||
for (i = 0; i < 0x1000; ++i) {
|
||||
pci_read_config_byte(dev, 0x5b,
|
||||
®5bh);
|
||||
if ((reg5bh & 0x80) == 0)
|
||||
&scr2);
|
||||
if ((scr2 & 0x80) == 0)
|
||||
goto pll_recal;
|
||||
}
|
||||
pci_read_config_dword(dev, 0x5c, &pll);
|
||||
|
@ -1159,26 +1156,24 @@ init_hpt37X_done:
|
|||
|
||||
static int __devinit init_hpt37x(struct pci_dev *dev)
|
||||
{
|
||||
u8 reg5ah;
|
||||
u8 scr1;
|
||||
|
||||
pci_read_config_byte(dev, 0x5a, ®5ah);
|
||||
pci_read_config_byte (dev, 0x5a, &scr1);
|
||||
/* interrupt force enable */
|
||||
pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10));
|
||||
pci_write_config_byte(dev, 0x5a, (scr1 & ~0x10));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit init_hpt366(struct pci_dev *dev)
|
||||
{
|
||||
u32 reg1 = 0;
|
||||
u8 drive_fast = 0;
|
||||
u8 mcr = 0;
|
||||
|
||||
/*
|
||||
* Disable the "fast interrupt" prediction.
|
||||
*/
|
||||
pci_read_config_byte(dev, 0x51, &drive_fast);
|
||||
if (drive_fast & 0x80)
|
||||
pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
|
||||
pci_read_config_dword(dev, 0x40, ®1);
|
||||
pci_read_config_byte(dev, 0x51, &mcr);
|
||||
if (mcr & 0x80)
|
||||
pci_write_config_byte(dev, 0x51, mcr & ~0x80);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -1213,17 +1208,21 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
|
|||
|
||||
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
||||
{
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02;
|
||||
int serialize = HPT_SERIALIZE_IO;
|
||||
|
||||
u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02;
|
||||
|
||||
/* Cache the channel's MISC. control registers' offset */
|
||||
hwif->select_data = hwif->channel ? 0x54 : 0x50;
|
||||
|
||||
hwif->tuneproc = &hpt3xx_tune_drive;
|
||||
hwif->speedproc = &hpt3xx_tune_chipset;
|
||||
hwif->quirkproc = &hpt3xx_quirkproc;
|
||||
hwif->intrproc = &hpt3xx_intrproc;
|
||||
hwif->maskproc = &hpt3xx_maskproc;
|
||||
|
||||
hwif->busproc = &hpt3xx_busproc;
|
||||
|
||||
/*
|
||||
* HPT3xxN chips have some complications:
|
||||
*
|
||||
|
@ -1241,7 +1240,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||
|
||||
/*
|
||||
* The HPT37x uses the CBLID pins as outputs for MA15/MA16
|
||||
* address lines to access an external eeprom. To read valid
|
||||
* address lines to access an external EEPROM. To read valid
|
||||
* cable detect state the pins must be enabled as inputs.
|
||||
*/
|
||||
if (info->revision >= 8 && (PCI_FUNC(dev->devfn) & 1)) {
|
||||
|
@ -1250,35 +1249,28 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||
* - set bit 15 of reg 0x52 to enable TCBLID as input
|
||||
* - set bit 15 of reg 0x56 to enable FCBLID as input
|
||||
*/
|
||||
u16 mcr3, mcr6;
|
||||
pci_read_config_word(dev, 0x52, &mcr3);
|
||||
pci_read_config_word(dev, 0x56, &mcr6);
|
||||
pci_write_config_word(dev, 0x52, mcr3 | 0x8000);
|
||||
pci_write_config_word(dev, 0x56, mcr6 | 0x8000);
|
||||
u8 mcr_addr = hwif->select_data + 2;
|
||||
u16 mcr;
|
||||
|
||||
pci_read_config_word (dev, mcr_addr, &mcr);
|
||||
pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
|
||||
/* now read cable id register */
|
||||
pci_read_config_byte(dev, 0x5a, &ata66);
|
||||
pci_write_config_word(dev, 0x52, mcr3);
|
||||
pci_write_config_word(dev, 0x56, mcr6);
|
||||
pci_read_config_byte (dev, 0x5a, &scr1);
|
||||
pci_write_config_word(dev, mcr_addr, mcr);
|
||||
} else if (info->revision >= 3) {
|
||||
/*
|
||||
* HPT370/372 and 374 pcifn 0
|
||||
* - clear bit 0 of 0x5b to enable P/SCBLID as inputs
|
||||
* - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
|
||||
*/
|
||||
u8 scr2;
|
||||
pci_read_config_byte(dev, 0x5b, &scr2);
|
||||
pci_write_config_byte(dev, 0x5b, scr2 & ~1);
|
||||
/* now read cable id register */
|
||||
pci_read_config_byte(dev, 0x5a, &ata66);
|
||||
pci_write_config_byte(dev, 0x5b, scr2);
|
||||
} else {
|
||||
pci_read_config_byte(dev, 0x5a, &ata66);
|
||||
}
|
||||
u8 scr2 = 0;
|
||||
|
||||
#ifdef DEBUG
|
||||
printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n",
|
||||
ata66, (ata66 & regmask) ? "33" : "66",
|
||||
PCI_FUNC(hwif->pci_dev->devfn));
|
||||
#endif /* DEBUG */
|
||||
pci_read_config_byte (dev, 0x5b, &scr2);
|
||||
pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
|
||||
/* now read cable id register */
|
||||
pci_read_config_byte (dev, 0x5a, &scr1);
|
||||
pci_write_config_byte(dev, 0x5b, scr2);
|
||||
} else
|
||||
pci_read_config_byte (dev, 0x5a, &scr1);
|
||||
|
||||
/* Serialize access to this device */
|
||||
if (serialize && hwif->mate)
|
||||
|
@ -1300,7 +1292,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||
hwif->mwdma_mask = 0x07;
|
||||
|
||||
if (!(hwif->udma_four))
|
||||
hwif->udma_four = ((ata66 & regmask) ? 0 : 1);
|
||||
hwif->udma_four = ((scr1 & ata66) ? 0 : 1);
|
||||
hwif->ide_dma_check = &hpt366_config_drive_xfer_rate;
|
||||
|
||||
if (info->revision >= 8) {
|
||||
|
@ -1327,11 +1319,10 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||
|
||||
static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
|
||||
{
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
u8 masterdma = 0, slavedma = 0;
|
||||
u8 dma_new = 0, dma_old = 0;
|
||||
u8 primary = hwif->channel ? 0x4b : 0x43;
|
||||
u8 secondary = hwif->channel ? 0x4f : 0x47;
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = ide_get_hwifdata(hwif);
|
||||
u8 masterdma = 0, slavedma = 0;
|
||||
u8 dma_new = 0, dma_old = 0;
|
||||
unsigned long flags;
|
||||
|
||||
if (!dmabase)
|
||||
|
@ -1348,13 +1339,13 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
|
|||
local_irq_save(flags);
|
||||
|
||||
dma_new = dma_old;
|
||||
pci_read_config_byte(hwif->pci_dev, primary, &masterdma);
|
||||
pci_read_config_byte(hwif->pci_dev, secondary, &slavedma);
|
||||
pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma);
|
||||
pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma);
|
||||
|
||||
if (masterdma & 0x30) dma_new |= 0x20;
|
||||
if (slavedma & 0x30) dma_new |= 0x40;
|
||||
if ( slavedma & 0x30) dma_new |= 0x40;
|
||||
if (dma_new != dma_old)
|
||||
hwif->OUTB(dma_new, dmabase+2);
|
||||
hwif->OUTB(dma_new, dmabase + 2);
|
||||
|
||||
local_irq_restore(flags);
|
||||
|
||||
|
|
Loading…
Reference in New Issue