diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ae96bd6242f2..260bade0a5ec 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -17,7 +17,7 @@ config MFD_SM501 config MFD_ASIC3 bool "Support for Compaq ASIC3" - depends on GENERIC_HARDIRQS && ARM + depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM ---help--- This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index ef8a492766a7..3b870e7fb3e1 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -9,7 +9,7 @@ * * Copyright 2001 Compaq Computer Corporation. * Copyright 2004-2005 Phil Blundell - * Copyright 2007 OpenedHand Ltd. + * Copyright 2007-2008 OpenedHand Ltd. * * Authors: Phil Blundell , * Samuel Ortiz @@ -19,12 +19,26 @@ #include #include #include +#include #include #include #include #include +struct asic3 { + void __iomem *mapping; + unsigned int bus_shift; + unsigned int irq_nr; + unsigned int irq_base; + spinlock_t lock; + u16 irq_bothedge[4]; + struct gpio_chip gpio; + struct device *dev; +}; + +static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset); + static inline void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 value) { @@ -41,8 +55,8 @@ static inline u32 asic3_read_register(struct asic3 *asic, /* IRQs */ #define MAX_ASIC_ISR_LOOPS 20 -#define ASIC3_GPIO_Base_INCR \ - (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base) +#define ASIC3_GPIO_BASE_INCR \ + (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE) static void asic3_irq_flip_edge(struct asic3 *asic, u32 base, int bit) @@ -52,10 +66,10 @@ static void asic3_irq_flip_edge(struct asic3 *asic, spin_lock_irqsave(&asic->lock, flags); edge = asic3_read_register(asic, - base + ASIC3_GPIO_EdgeTrigger); + base + ASIC3_GPIO_EDGE_TRIGGER); edge ^= bit; asic3_write_register(asic, - base + ASIC3_GPIO_EdgeTrigger, edge); + base + ASIC3_GPIO_EDGE_TRIGGER, edge); spin_unlock_irqrestore(&asic->lock, flags); } @@ -75,7 +89,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) spin_lock_irqsave(&asic->lock, flags); status = asic3_read_register(asic, - ASIC3_OFFSET(INTR, PIntStat)); + ASIC3_OFFSET(INTR, P_INT_STAT)); spin_unlock_irqrestore(&asic->lock, flags); /* Check all ten register bits */ @@ -87,17 +101,17 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) if (status & (1 << bank)) { unsigned long base, istat; - base = ASIC3_GPIO_A_Base - + bank * ASIC3_GPIO_Base_INCR; + base = ASIC3_GPIO_A_BASE + + bank * ASIC3_GPIO_BASE_INCR; spin_lock_irqsave(&asic->lock, flags); istat = asic3_read_register(asic, base + - ASIC3_GPIO_IntStatus); + ASIC3_GPIO_INT_STATUS); /* Clearing IntStatus */ asic3_write_register(asic, base + - ASIC3_GPIO_IntStatus, 0); + ASIC3_GPIO_INT_STATUS, 0); spin_unlock_irqrestore(&asic->lock, flags); for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) { @@ -123,7 +137,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) { /* They start at bit 4 and go up */ if (status & (1 << (i - ASIC3_NUM_GPIOS + 4))) { - desc = irq_desc + + i; + desc = irq_desc + asic->irq_base + i; desc->handle_irq(asic->irq_base + i, desc); } @@ -131,8 +145,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) } if (iter >= MAX_ASIC_ISR_LOOPS) - printk(KERN_ERR "%s: interrupt processing overrun\n", - __func__); + dev_err(asic->dev, "interrupt processing overrun\n"); } static inline int asic3_irq_to_bank(struct asic3 *asic, int irq) @@ -141,7 +154,7 @@ static inline int asic3_irq_to_bank(struct asic3 *asic, int irq) n = (irq - asic->irq_base) >> 4; - return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)); + return (n * (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE)); } static inline int asic3_irq_to_index(struct asic3 *asic, int irq) @@ -159,9 +172,9 @@ static void asic3_mask_gpio_irq(unsigned int irq) index = asic3_irq_to_index(asic, irq); spin_lock_irqsave(&asic->lock, flags); - val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask); + val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK); val |= 1 << index; - asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val); + asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val); spin_unlock_irqrestore(&asic->lock, flags); } @@ -173,15 +186,15 @@ static void asic3_mask_irq(unsigned int irq) spin_lock_irqsave(&asic->lock, flags); regval = asic3_read_register(asic, - ASIC3_INTR_Base + - ASIC3_INTR_IntMask); + ASIC3_INTR_BASE + + ASIC3_INTR_INT_MASK); regval &= ~(ASIC3_INTMASK_MASK0 << (irq - (asic->irq_base + ASIC3_NUM_GPIOS))); asic3_write_register(asic, - ASIC3_INTR_Base + - ASIC3_INTR_IntMask, + ASIC3_INTR_BASE + + ASIC3_INTR_INT_MASK, regval); spin_unlock_irqrestore(&asic->lock, flags); } @@ -196,9 +209,9 @@ static void asic3_unmask_gpio_irq(unsigned int irq) index = asic3_irq_to_index(asic, irq); spin_lock_irqsave(&asic->lock, flags); - val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask); + val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK); val &= ~(1 << index); - asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val); + asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val); spin_unlock_irqrestore(&asic->lock, flags); } @@ -210,15 +223,15 @@ static void asic3_unmask_irq(unsigned int irq) spin_lock_irqsave(&asic->lock, flags); regval = asic3_read_register(asic, - ASIC3_INTR_Base + - ASIC3_INTR_IntMask); + ASIC3_INTR_BASE + + ASIC3_INTR_INT_MASK); regval |= (ASIC3_INTMASK_MASK0 << (irq - (asic->irq_base + ASIC3_NUM_GPIOS))); asic3_write_register(asic, - ASIC3_INTR_Base + - ASIC3_INTR_IntMask, + ASIC3_INTR_BASE + + ASIC3_INTR_INT_MASK, regval); spin_unlock_irqrestore(&asic->lock, flags); } @@ -236,11 +249,11 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) spin_lock_irqsave(&asic->lock, flags); level = asic3_read_register(asic, - bank + ASIC3_GPIO_LevelTrigger); + bank + ASIC3_GPIO_LEVEL_TRIGGER); edge = asic3_read_register(asic, - bank + ASIC3_GPIO_EdgeTrigger); + bank + ASIC3_GPIO_EDGE_TRIGGER); trigger = asic3_read_register(asic, - bank + ASIC3_GPIO_TriggerType); + bank + ASIC3_GPIO_TRIGGER_TYPE); asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; if (type == IRQT_RISING) { @@ -251,7 +264,7 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) edge &= ~bit; } else if (type == IRQT_BOTHEDGE) { trigger |= bit; - if (asic3_gpio_get_value(asic, irq - asic->irq_base)) + if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base)) edge &= ~bit; else edge |= bit; @@ -268,13 +281,13 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) * be careful to not unmask them if mask was also called. * Probably need internal state for mask. */ - printk(KERN_NOTICE "asic3: irq type not changed.\n"); + dev_notice(asic->dev, "irq type not changed\n"); } - asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger, + asic3_write_register(asic, bank + ASIC3_GPIO_LEVEL_TRIGGER, level); - asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger, + asic3_write_register(asic, bank + ASIC3_GPIO_EDGE_TRIGGER, edge); - asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType, + asic3_write_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE, trigger); spin_unlock_irqrestore(&asic->lock, flags); return 0; @@ -295,11 +308,12 @@ static struct irq_chip asic3_irq_chip = { .unmask = asic3_unmask_irq, }; -static int asic3_irq_probe(struct platform_device *pdev) +static int __init asic3_irq_probe(struct platform_device *pdev) { struct asic3 *asic = platform_get_drvdata(pdev); unsigned long clksel = 0; unsigned int irq, irq_base; + int map_size; asic->irq_nr = platform_get_irq(pdev, 0); if (asic->irq_nr < 0) @@ -323,7 +337,7 @@ static int asic3_irq_probe(struct platform_device *pdev) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask), + asic3_write_register(asic, ASIC3_OFFSET(INTR, INT_MASK), ASIC3_INTMASK_GINTMASK); set_irq_chained_handler(asic->irq_nr, asic3_irq_demux); @@ -350,149 +364,182 @@ static void asic3_irq_remove(struct platform_device *pdev) } /* GPIOs */ -static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base, - unsigned int function) -{ - return asic3_read_register(asic, base + function); -} - -static void asic3_set_gpio(struct asic3 *asic, unsigned int base, - unsigned int function, u32 bits, u32 val) +static int asic3_gpio_direction(struct gpio_chip *chip, + unsigned offset, int out) { + u32 mask = ASIC3_GPIO_TO_MASK(offset), out_reg; + unsigned int gpio_base; unsigned long flags; + struct asic3 *asic; - spin_lock_irqsave(&asic->lock, flags); - val |= (asic3_read_register(asic, base + function) & ~bits); + asic = container_of(chip, struct asic3, gpio); + gpio_base = ASIC3_GPIO_TO_BASE(offset); - asic3_write_register(asic, base + function, val); - spin_unlock_irqrestore(&asic->lock, flags); -} - -#define asic3_get_gpio_a(asic, fn) \ - asic3_get_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn) -#define asic3_get_gpio_b(asic, fn) \ - asic3_get_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn) -#define asic3_get_gpio_c(asic, fn) \ - asic3_get_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn) -#define asic3_get_gpio_d(asic, fn) \ - asic3_get_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn) - -#define asic3_set_gpio_a(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val) -#define asic3_set_gpio_b(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val) -#define asic3_set_gpio_c(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val) -#define asic3_set_gpio_d(asic, fn, bits, val) \ - asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val) - -#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \ - do { \ - asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \ - asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \ - asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \ - asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \ - } while (0) - -int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio) -{ - u32 mask = ASIC3_GPIO_bit(gpio); - - switch (gpio >> 4) { - case ASIC3_GPIO_BANK_A: - return asic3_get_gpio_a(asic, Status) & mask; - case ASIC3_GPIO_BANK_B: - return asic3_get_gpio_b(asic, Status) & mask; - case ASIC3_GPIO_BANK_C: - return asic3_get_gpio_c(asic, Status) & mask; - case ASIC3_GPIO_BANK_D: - return asic3_get_gpio_d(asic, Status) & mask; - default: - printk(KERN_ERR "%s: invalid GPIO value 0x%x", - __func__, gpio); + if (gpio_base > ASIC3_GPIO_D_BASE) { + dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n", + gpio_base, offset); return -EINVAL; } -} -EXPORT_SYMBOL(asic3_gpio_get_value); -void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val) -{ - u32 mask = ASIC3_GPIO_bit(gpio); - u32 bitval = 0; - if (val) - bitval = mask; + spin_lock_irqsave(&asic->lock, flags); - switch (gpio >> 4) { - case ASIC3_GPIO_BANK_A: - asic3_set_gpio_a(asic, Out, mask, bitval); - return; - case ASIC3_GPIO_BANK_B: - asic3_set_gpio_b(asic, Out, mask, bitval); - return; - case ASIC3_GPIO_BANK_C: - asic3_set_gpio_c(asic, Out, mask, bitval); - return; - case ASIC3_GPIO_BANK_D: - asic3_set_gpio_d(asic, Out, mask, bitval); - return; - default: - printk(KERN_ERR "%s: invalid GPIO value 0x%x", - __func__, gpio); - return; - } -} -EXPORT_SYMBOL(asic3_gpio_set_value); + out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_DIRECTION); -static int asic3_gpio_probe(struct platform_device *pdev) -{ - struct asic3_platform_data *pdata = pdev->dev.platform_data; - struct asic3 *asic = platform_get_drvdata(pdev); + /* Input is 0, Output is 1 */ + if (out) + out_reg |= mask; + else + out_reg &= ~mask; - asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff); - asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff); - asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff); - asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff); + asic3_write_register(asic, gpio_base + ASIC3_GPIO_DIRECTION, out_reg); - asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff); - asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff); - asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff); - asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff); - - if (pdata) { - asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init); - asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir); - asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata, - sleep_mask); - asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out); - asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata, - batt_fault_out); - asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata, - sleep_conf); - asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata, - alt_function); - } + spin_unlock_irqrestore(&asic->lock, flags); return 0; + } -static void asic3_gpio_remove(struct platform_device *pdev) +static int asic3_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) { + return asic3_gpio_direction(chip, offset, 0); +} + +static int asic3_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return asic3_gpio_direction(chip, offset, 1); +} + +static int asic3_gpio_get(struct gpio_chip *chip, + unsigned offset) +{ + unsigned int gpio_base; + u32 mask = ASIC3_GPIO_TO_MASK(offset); + struct asic3 *asic; + + asic = container_of(chip, struct asic3, gpio); + gpio_base = ASIC3_GPIO_TO_BASE(offset); + + if (gpio_base > ASIC3_GPIO_D_BASE) { + dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n", + gpio_base, offset); + return -EINVAL; + } + + return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask; +} + +static void asic3_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + u32 mask, out_reg; + unsigned int gpio_base; + unsigned long flags; + struct asic3 *asic; + + asic = container_of(chip, struct asic3, gpio); + gpio_base = ASIC3_GPIO_TO_BASE(offset); + + if (gpio_base > ASIC3_GPIO_D_BASE) { + dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n", + gpio_base, offset); + return; + } + + mask = ASIC3_GPIO_TO_MASK(offset); + + spin_lock_irqsave(&asic->lock, flags); + + out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_OUT); + + if (value) + out_reg |= mask; + else + out_reg &= ~mask; + + asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg); + + spin_unlock_irqrestore(&asic->lock, flags); + return; } +static __init int asic3_gpio_probe(struct platform_device *pdev, + u16 *gpio_config, int num) +{ + struct asic3 *asic = platform_get_drvdata(pdev); + u16 alt_reg[ASIC3_NUM_GPIO_BANKS]; + u16 out_reg[ASIC3_NUM_GPIO_BANKS]; + u16 dir_reg[ASIC3_NUM_GPIO_BANKS]; + int i; + + memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + + /* Enable all GPIOs */ + asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff); + asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, MASK), 0xffff); + asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, MASK), 0xffff); + asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, MASK), 0xffff); + + for (i = 0; i < num; i++) { + u8 alt, pin, dir, init, bank_num, bit_num; + u16 config = gpio_config[i]; + + pin = ASIC3_CONFIG_GPIO_PIN(config); + alt = ASIC3_CONFIG_GPIO_ALT(config); + dir = ASIC3_CONFIG_GPIO_DIR(config); + init = ASIC3_CONFIG_GPIO_INIT(config); + + bank_num = ASIC3_GPIO_TO_BANK(pin); + bit_num = ASIC3_GPIO_TO_BIT(pin); + + alt_reg[bank_num] |= (alt << bit_num); + out_reg[bank_num] |= (init << bit_num); + dir_reg[bank_num] |= (dir << bit_num); + } + + for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) { + asic3_write_register(asic, + ASIC3_BANK_TO_BASE(i) + + ASIC3_GPIO_DIRECTION, + dir_reg[i]); + asic3_write_register(asic, + ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_OUT, + out_reg[i]); + asic3_write_register(asic, + ASIC3_BANK_TO_BASE(i) + + ASIC3_GPIO_ALT_FUNCTION, + alt_reg[i]); + } + + return gpiochip_add(&asic->gpio); +} + +static int asic3_gpio_remove(struct platform_device *pdev) +{ + struct asic3 *asic = platform_get_drvdata(pdev); + + return gpiochip_remove(&asic->gpio); +} + /* Core */ -static int asic3_probe(struct platform_device *pdev) +static int __init asic3_probe(struct platform_device *pdev) { struct asic3_platform_data *pdata = pdev->dev.platform_data; struct asic3 *asic; struct resource *mem; unsigned long clksel; - int ret; + int ret = 0; asic = kzalloc(sizeof(struct asic3), GFP_KERNEL); - if (!asic) + if (asic == NULL) { + printk(KERN_ERR "kzalloc failed\n"); return -ENOMEM; + } spin_lock_init(&asic->lock); platform_set_drvdata(pdev, asic); @@ -501,49 +548,58 @@ static int asic3_probe(struct platform_device *pdev) mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { ret = -ENOMEM; - printk(KERN_ERR "asic3: no MEM resource\n"); - goto err_out_1; + dev_err(asic->dev, "no MEM resource\n"); + goto out_free; } - asic->mapping = ioremap(mem->start, PAGE_SIZE); + map_size = mem->end - mem->start + 1; + asic->mapping = ioremap(mem->start, map_size); if (!asic->mapping) { ret = -ENOMEM; - printk(KERN_ERR "asic3: couldn't ioremap\n"); - goto err_out_1; + dev_err(asic->dev, "Couldn't ioremap\n"); + goto out_free; } asic->irq_base = pdata->irq_base; - if (pdata && pdata->bus_shift) - asic->bus_shift = 2 - pdata->bus_shift; - else - asic->bus_shift = 0; + /* calculate bus shift from mem resource */ + asic->bus_shift = 2 - (map_size >> 12); clksel = 0; asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel); ret = asic3_irq_probe(pdev); if (ret < 0) { - printk(KERN_ERR "asic3: couldn't probe IRQs\n"); - goto err_out_2; - } - asic3_gpio_probe(pdev); - - if (pdata->children) { - int i; - for (i = 0; i < pdata->n_children; i++) { - pdata->children[i]->dev.parent = &pdev->dev; - platform_device_register(pdata->children[i]); - } + dev_err(asic->dev, "Couldn't probe IRQs\n"); + goto out_unmap; } - printk(KERN_INFO "ASIC3 Core driver\n"); + asic->gpio.base = pdata->gpio_base; + asic->gpio.ngpio = ASIC3_NUM_GPIOS; + asic->gpio.get = asic3_gpio_get; + asic->gpio.set = asic3_gpio_set; + asic->gpio.direction_input = asic3_gpio_direction_input; + asic->gpio.direction_output = asic3_gpio_direction_output; + + ret = asic3_gpio_probe(pdev, + pdata->gpio_config, + pdata->gpio_config_num); + if (ret < 0) { + dev_err(asic->dev, "GPIO probe failed\n"); + goto out_irq; + } + + dev_info(asic->dev, "ASIC3 Core driver\n"); return 0; - err_out_2: + out_irq: + asic3_irq_remove(pdev); + + out_unmap: iounmap(asic->mapping); - err_out_1: + + out_free: kfree(asic); return ret; @@ -551,9 +607,12 @@ static int asic3_probe(struct platform_device *pdev) static int asic3_remove(struct platform_device *pdev) { + int ret; struct asic3 *asic = platform_get_drvdata(pdev); - asic3_gpio_remove(pdev); + ret = asic3_gpio_remove(pdev); + if (ret < 0) + return ret; asic3_irq_remove(pdev); asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0); @@ -573,7 +632,6 @@ static struct platform_driver asic3_device_driver = { .driver = { .name = "asic3", }, - .probe = asic3_probe, .remove = __devexit_p(asic3_remove), .shutdown = asic3_shutdown, }; @@ -581,7 +639,7 @@ static struct platform_driver asic3_device_driver = { static int __init asic3_init(void) { int retval = 0; - retval = platform_driver_register(&asic3_device_driver); + retval = platform_driver_probe(&asic3_device_driver, asic3_probe); return retval; } diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h index 4ab2162db13b..322cd6deb9f0 100644 --- a/include/linux/mfd/asic3.h +++ b/include/linux/mfd/asic3.h @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * Copyright 2001 Compaq Computer Corporation. - * Copyright 2007 OpendHand. + * Copyright 2007-2008 OpenedHand Ltd. */ #ifndef __ASIC3_H__ @@ -16,43 +16,22 @@ #include -struct asic3 { - void __iomem *mapping; - unsigned int bus_shift; - unsigned int irq_nr; - unsigned int irq_base; - spinlock_t lock; - u16 irq_bothedge[4]; - struct device *dev; -}; - struct asic3_platform_data { - struct { - u32 dir; - u32 init; - u32 sleep_mask; - u32 sleep_out; - u32 batt_fault_out; - u32 sleep_conf; - u32 alt_function; - } gpio_a, gpio_b, gpio_c, gpio_d; - - unsigned int bus_shift; + u16 *gpio_config; + unsigned int gpio_config_num; unsigned int irq_base; - struct platform_device **children; - unsigned int n_children; + unsigned int gpio_base; }; -int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio); -void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); - #define ASIC3_NUM_GPIO_BANKS 4 #define ASIC3_GPIOS_PER_BANK 16 #define ASIC3_NUM_GPIOS 64 #define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6 +#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio)) + #define ASIC3_GPIO_BANK_A 0 #define ASIC3_GPIO_BANK_B 1 #define ASIC3_GPIO_BANK_C 2 @@ -64,32 +43,89 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); /* All offsets below are specified with this address bus shift */ #define ASIC3_DEFAULT_ADDR_SHIFT 2 -#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_Base + ASIC3_##base##_##reg) +#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg) #define ASIC3_GPIO_OFFSET(base, reg) \ - (ASIC3_GPIO_##base##_Base + ASIC3_GPIO_##reg) + (ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg) -#define ASIC3_GPIO_A_Base 0x0000 -#define ASIC3_GPIO_B_Base 0x0100 -#define ASIC3_GPIO_C_Base 0x0200 -#define ASIC3_GPIO_D_Base 0x0300 +#define ASIC3_GPIO_A_BASE 0x0000 +#define ASIC3_GPIO_B_BASE 0x0100 +#define ASIC3_GPIO_C_BASE 0x0200 +#define ASIC3_GPIO_D_BASE 0x0300 -#define ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask */ -#define ASIC3_GPIO_Direction 0x04 /* R/W 0:input */ -#define ASIC3_GPIO_Out 0x08 /* R/W 0:output low */ -#define ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level */ -#define ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling */ -#define ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low level detect */ -#define ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask in sleep mode */ -#define ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low in sleep mode */ -#define ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low in batt_fault */ -#define ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */ -#define ASIC3_GPIO_AltFunction 0x28 /* R/W 1:LED register control */ -#define ASIC3_GPIO_SleepConf 0x2c /* +#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4) +#define ASIC3_GPIO_TO_BIT(gpio) ((gpio) - \ + (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4))) +#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio)) +#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100)) +#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100)) + +#define ASIC3_GPIO_MASK 0x00 /* R/W 0:don't mask */ +#define ASIC3_GPIO_DIRECTION 0x04 /* R/W 0:input */ +#define ASIC3_GPIO_OUT 0x08 /* R/W 0:output low */ +#define ASIC3_GPIO_TRIGGER_TYPE 0x0c /* R/W 0:level */ +#define ASIC3_GPIO_EDGE_TRIGGER 0x10 /* R/W 0:falling */ +#define ASIC3_GPIO_LEVEL_TRIGGER 0x14 /* R/W 0:low level detect */ +#define ASIC3_GPIO_SLEEP_MASK 0x18 /* R/W 0:don't mask in sleep mode */ +#define ASIC3_GPIO_SLEEP_OUT 0x1c /* R/W level 0:low in sleep mode */ +#define ASIC3_GPIO_BAT_FAULT_OUT 0x20 /* R/W level 0:low in batt_fault */ +#define ASIC3_GPIO_INT_STATUS 0x24 /* R/W 0:none, 1:detect */ +#define ASIC3_GPIO_ALT_FUNCTION 0x28 /* R/W 1:LED register control */ +#define ASIC3_GPIO_SLEEP_CONF 0x2c /* * R/W bit 1: autosleep * 0: disable gposlpout in normal mode, * enable gposlpout in sleep mode. */ -#define ASIC3_GPIO_Status 0x30 /* R Pin status */ +#define ASIC3_GPIO_STATUS 0x30 /* R Pin status */ + +/* + * ASIC3 GPIO config + * + * Bits 0..6 gpio number + * Bits 7..13 Alternate function + * Bit 14 Direction + * Bit 15 Initial value + * + */ +#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f) +#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7) +#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14) +#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15) +#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \ + | (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \ + | (((init) & 0x1) << 15)) +#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \ + ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init)) +#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \ + ASIC3_CONFIG_GPIO((gpio), 0, 1, (init)) + +/* + * Alternate functions + */ +#define ASIC3_GPIOA11_PWM0 ASIC3_CONFIG_GPIO(11, 1, 1, 0) +#define ASIC3_GPIOA12_PWM1 ASIC3_CONFIG_GPIO(12, 1, 1, 0) +#define ASIC3_GPIOA15_CONTROL_CX ASIC3_CONFIG_GPIO(15, 1, 1, 0) +#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 1, 0) +#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 1, 0) +#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 1, 0) +#define ASIC3_GPIOC3_SPI_RXD ASIC3_CONFIG_GPIO(35, 1, 0, 0) +#define ASIC3_GPIOC4_CF_nCD ASIC3_CONFIG_GPIO(36, 1, 0, 0) +#define ASIC3_GPIOC4_SPI_TXD ASIC3_CONFIG_GPIO(36, 1, 1, 0) +#define ASIC3_GPIOC5_SPI_CLK ASIC3_CONFIG_GPIO(37, 1, 1, 0) +#define ASIC3_GPIOC5_nCIOW ASIC3_CONFIG_GPIO(37, 1, 1, 0) +#define ASIC3_GPIOC6_nCIOR ASIC3_CONFIG_GPIO(38, 1, 1, 0) +#define ASIC3_GPIOC7_nPCE_1 ASIC3_CONFIG_GPIO(39, 1, 0, 0) +#define ASIC3_GPIOC8_nPCE_2 ASIC3_CONFIG_GPIO(40, 1, 0, 0) +#define ASIC3_GPIOC9_nPOE ASIC3_CONFIG_GPIO(41, 1, 0, 0) +#define ASIC3_GPIOC10_nPWE ASIC3_CONFIG_GPIO(42, 1, 0, 0) +#define ASIC3_GPIOC11_PSKTSEL ASIC3_CONFIG_GPIO(43, 1, 0, 0) +#define ASIC3_GPIOC12_nPREG ASIC3_CONFIG_GPIO(44, 1, 0, 0) +#define ASIC3_GPIOC13_nPWAIT ASIC3_CONFIG_GPIO(45, 1, 1, 0) +#define ASIC3_GPIOC14_nPIOIS16 ASIC3_CONFIG_GPIO(46, 1, 1, 0) +#define ASIC3_GPIOC15_nPIOR ASIC3_CONFIG_GPIO(47, 1, 0, 0) +#define ASIC3_GPIOD11_nCIOIS16 ASIC3_CONFIG_GPIO(59, 1, 0, 0) +#define ASIC3_GPIOD12_nCWAIT ASIC3_CONFIG_GPIO(60, 1, 0, 0) +#define ASIC3_GPIOD15_nPIOW ASIC3_CONFIG_GPIO(63, 1, 0, 0) + #define ASIC3_SPI_Base 0x0400 #define ASIC3_SPI_Control 0x0000 @@ -128,7 +164,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */ #define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */ -#define ASIC3_CLOCK_Base 0x0A00 +#define ASIC3_CLOCK_BASE 0x0A00 #define ASIC3_CLOCK_CDEX 0x00 #define ASIC3_CLOCK_SEL 0x04 @@ -159,12 +195,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define CLOCK_SEL_CX (1 << 2) -#define ASIC3_INTR_Base 0x0B00 +#define ASIC3_INTR_BASE 0x0B00 -#define ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */ -#define ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */ -#define ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */ -#define ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */ +#define ASIC3_INTR_INT_MASK 0x00 /* Interrupt mask control */ +#define ASIC3_INTR_P_INT_STAT 0x04 /* Peripheral interrupt status */ +#define ASIC3_INTR_INT_CPS 0x08 /* Interrupt timer clock pre-scale */ +#define ASIC3_INTR_INT_TBS 0x0c /* Interrupt timer set */ #define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global INTs mask 1:enable */ #define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */ @@ -227,44 +263,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */ /********************************************* - * The Onewire interface registers - * - * OWM_CMD - * OWM_DAT - * OWM_INTR - * OWM_INTEN - * OWM_CLKDIV + * The Onewire interface (DS1WM) is handled + * by the ds1wm driver. * *********************************************/ -#define ASIC3_OWM_Base 0xC00 - -#define ASIC3_OWM_CMD 0x00 -#define ASIC3_OWM_DAT 0x04 -#define ASIC3_OWM_INTR 0x08 -#define ASIC3_OWM_INTEN 0x0C -#define ASIC3_OWM_CLKDIV 0x10 - -#define ASIC3_OWM_CMD_ONEWR (1 << 0) -#define ASIC3_OWM_CMD_SRA (1 << 1) -#define ASIC3_OWM_CMD_DQO (1 << 2) -#define ASIC3_OWM_CMD_DQI (1 << 3) - -#define ASIC3_OWM_INTR_PD (1 << 0) -#define ASIC3_OWM_INTR_PDR (1 << 1) -#define ASIC3_OWM_INTR_TBE (1 << 2) -#define ASIC3_OWM_INTR_TEMP (1 << 3) -#define ASIC3_OWM_INTR_RBF (1 << 4) - -#define ASIC3_OWM_INTEN_EPD (1 << 0) -#define ASIC3_OWM_INTEN_IAS (1 << 1) -#define ASIC3_OWM_INTEN_ETBE (1 << 2) -#define ASIC3_OWM_INTEN_ETMT (1 << 3) -#define ASIC3_OWM_INTEN_ERBF (1 << 4) - -#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit 0 */ -#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit 2 */ - +#define ASIC3_OWM_BASE 0xC00 /***************************************************************************** * The SD configuration registers are at a completely different location @@ -492,6 +496,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define ASIC3_SDIO_CTRL_LEDCtrl 0x7C #define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0 -#define ASIC3_MAP_SIZE 0x2000 +#define ASIC3_MAP_SIZE_32BIT 0x2000 +#define ASIC3_MAP_SIZE_16BIT 0x1000 #endif /* __ASIC3_H__ */