ARM: 6703/1: SPEAr: update clk API support

- Add support for divisor per parent clock
- Add ENABLED_ON_INIT feature in clk
- Add clk_set_rate(), round_rate_index & clk_round_rate()
- Simplify clk_recalc functions
- Add/update clock definitions

Reviewed-by: Stanley Miao <stanley.miao@windriver.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: shiraz hashim <shiraz.hashim@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
viresh kumar 2011-02-16 07:40:39 +01:00 committed by Russell King
parent cf285434ac
commit af89fd812b
6 changed files with 1259 additions and 312 deletions

View File

@ -60,12 +60,22 @@ static struct pll_clk_config pll1_config = {
.masks = &pll1_masks,
};
/* pll rate configuration table, in ascending order of rates */
struct pll_rate_tbl pll_rtbl[] = {
{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
.flags = ENABLED_ON_INIT,
.pclk = &osc_24m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
.calc_rate = &pll_calc_rate,
.recalc = &pll_clk_recalc,
.set_rate = &pll_clk_set_rate,
.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
@ -103,11 +113,22 @@ static struct bus_clk_config ahb_config = {
.masks = &ahb_masks,
};
/* ahb rate configuration table, in ascending order of rates */
struct bus_rate_tbl bus_rtbl[] = {
{.div = 3}, /* == parent divided by 4 */
{.div = 2}, /* == parent divided by 3 */
{.div = 1}, /* == parent divided by 2 */
{.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
.set_rate = &bus_clk_set_rate,
.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
@ -123,22 +144,40 @@ static struct aux_clk_masks aux_masks = {
.yscale_sel_shift = AUX_YSCALE_SHIFT,
};
/* uart configurations */
static struct aux_clk_config uart_config = {
/* uart synth configurations */
static struct aux_clk_config uart_synth_config = {
.synth_reg = UART_CLK_SYNT,
.masks = &aux_masks,
};
/* aux rate configuration table, in ascending order of rates */
struct aux_rate_tbl aux_rtbl[] = {
/* For PLL1 = 332 MHz */
{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
};
/* uart synth clock */
static struct clk uart_synth_clk = {
.en_reg = UART_CLK_SYNT,
.en_reg_bit = AUX_SYNT_ENB,
.pclk = &pll1_clk,
.calc_rate = &aux_calc_rate,
.recalc = &aux_clk_recalc,
.set_rate = &aux_clk_set_rate,
.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
.private_data = &uart_synth_config,
};
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
.pclk = &pll1_clk,
.pclk_mask = AUX_CLK_PLL1_MASK,
.scalable = 1,
.pclk = &uart_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_mask = AUX_CLK_PLL3_MASK,
.scalable = 0,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
@ -156,26 +195,35 @@ static struct clk uart_clk = {
.en_reg_bit = UART_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
.recalc = &aux_clk_recalc,
.private_data = &uart_config,
.recalc = &follow_parent,
};
/* firda configurations */
static struct aux_clk_config firda_config = {
static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
.masks = &aux_masks,
};
/* firda synth clock */
static struct clk firda_synth_clk = {
.en_reg = FIRDA_CLK_SYNT,
.en_reg_bit = AUX_SYNT_ENB,
.pclk = &pll1_clk,
.calc_rate = &aux_calc_rate,
.recalc = &aux_clk_recalc,
.set_rate = &aux_clk_set_rate,
.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
.private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
.pclk = &pll1_clk,
.pclk_mask = AUX_CLK_PLL1_MASK,
.scalable = 1,
.pclk = &firda_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_mask = AUX_CLK_PLL3_MASK,
.scalable = 0,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
@ -193,29 +241,7 @@ static struct clk firda_clk = {
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
.recalc = &aux_clk_recalc,
.private_data = &firda_config,
};
/* gpt parents */
static struct pclk_info gpt_pclk_info[] = {
{
.pclk = &pll1_clk,
.pclk_mask = AUX_CLK_PLL1_MASK,
.scalable = 1,
}, {
.pclk = &pll3_48m_clk,
.pclk_mask = AUX_CLK_PLL3_MASK,
.scalable = 0,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt_pclk_sel = {
.pclk_info = gpt_pclk_info,
.pclk_count = ARRAY_SIZE(gpt_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
.recalc = &follow_parent,
};
/* gpt synthesizer masks */
@ -226,51 +252,144 @@ static struct gpt_clk_masks gpt_masks = {
.nscale_sel_shift = GPT_NSCALE_SHIFT,
};
/* gpt0 configurations */
static struct gpt_clk_config gpt0_config = {
/* gpt rate configuration table, in ascending order of rates */
struct gpt_rate_tbl gpt_rtbl[] = {
/* For pll1 = 332 MHz */
{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
{.mscale = 1, .nscale = 0}, /* 83 MHz */
};
/* gpt0 synth clk config*/
static struct gpt_clk_config gpt0_synth_config = {
.synth_reg = PRSC1_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt synth clock */
static struct clk gpt0_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt0_synth_config,
};
/* gpt parents */
static struct pclk_info gpt0_pclk_info[] = {
{
.pclk = &gpt0_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt0_pclk_sel = {
.pclk_info = gpt0_pclk_info,
.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt0 timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
.pclk_sel = &gpt_pclk_sel,
.pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
.recalc = &gpt_clk_recalc,
.private_data = &gpt0_config,
.recalc = &follow_parent,
};
/* gpt1 configurations */
static struct gpt_clk_config gpt1_config = {
/* gpt1 synth clk configurations */
static struct gpt_clk_config gpt1_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt1 synth clock */
static struct clk gpt1_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt1_synth_config,
};
static struct pclk_info gpt1_pclk_info[] = {
{
.pclk = &gpt1_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt1_pclk_sel = {
.pclk_info = gpt1_pclk_info,
.pclk_count = ARRAY_SIZE(gpt1_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT1_CLK_ENB,
.pclk_sel = &gpt_pclk_sel,
.pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
.recalc = &gpt_clk_recalc,
.private_data = &gpt1_config,
.recalc = &follow_parent,
};
/* gpt2 configurations */
static struct gpt_clk_config gpt2_config = {
/* gpt2 synth clk configurations */
static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt1 synth clock */
static struct clk gpt2_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt2_synth_config,
};
static struct pclk_info gpt2_pclk_info[] = {
{
.pclk = &gpt2_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt2_pclk_sel = {
.pclk_info = gpt2_pclk_info,
.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT2_CLK_ENB,
.pclk_sel = &gpt_pclk_sel,
.pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
.recalc = &gpt_clk_recalc,
.private_data = &gpt2_config,
.recalc = &follow_parent,
};
/* clock derived from pll3 clk */
@ -290,13 +409,6 @@ static struct clk usbd_clk = {
.recalc = &follow_parent,
};
/* clcd clock */
static struct clk clcd_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll3_48m_clk,
.recalc = &follow_parent,
};
/* clock derived from ahb clk */
/* apb masks structure */
static struct bus_clk_masks apb_masks = {
@ -314,7 +426,10 @@ static struct bus_clk_config apb_config = {
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
.set_rate = &bus_clk_set_rate,
.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
@ -375,8 +490,17 @@ static struct clk adc_clk = {
.recalc = &follow_parent,
};
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* emi clock */
static struct clk emi_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
#endif
/* ssp clock */
static struct clk ssp_clk = {
static struct clk ssp0_clk = {
.pclk = &apb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = SSP_CLK_ENB,
@ -393,6 +517,137 @@ static struct clk gpio_clk = {
static struct clk dummy_apb_pclk;
#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
defined(CONFIG_MACH_SPEAR320)
/* fsmc clock */
static struct clk fsmc_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
#endif
/* common clocks to spear310 and spear320 */
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* uart1 clock */
static struct clk uart1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* uart2 clock */
static struct clk uart2_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
/* common clocks to spear300 and spear320 */
#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
/* clcd clock */
static struct clk clcd_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll3_48m_clk,
.recalc = &follow_parent,
};
/* sdhci clock */
static struct clk sdhci_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
/* spear300 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR300
/* gpio1 clock */
static struct clk gpio1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* keyboard clock */
static struct clk kbd_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif
/* spear310 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR310
/* uart3 clock */
static struct clk uart3_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* uart4 clock */
static struct clk uart4_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* uart5 clock */
static struct clk uart5_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif
/* spear320 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR320
/* can0 clock */
static struct clk can0_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* can1 clock */
static struct clk can1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* i2c1 clock */
static struct clk i2c1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
/* ssp1 clock */
static struct clk ssp1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* ssp2 clock */
static struct clk ssp2_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* pwm clock */
static struct clk pwm_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif
/* array of all spear 3xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
@ -400,7 +655,7 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
/* clock derived from 32 KHz osc clk */
{ .dev_id = "rtc", .clk = &rtc_clk},
{ .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 24 MHz osc clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
@ -408,18 +663,22 @@ static struct clk_lookup spear_clk_lookups[] = {
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
{ .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
{ .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
{ .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
{ .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk},
{ .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .dev_id = "uart", .clk = &uart_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "gpt0", .clk = &gpt0_clk},
{ .dev_id = "gpt1", .clk = &gpt1_clk},
{ .dev_id = "gpt2", .clk = &gpt2_clk},
/* clock derived from pll3 clk */
{ .dev_id = "usbh", .clk = &usbh_clk},
{ .con_id = "usbh_clk", .clk = &usbh_clk},
{ .dev_id = "usbd", .clk = &usbd_clk},
{ .dev_id = "clcd", .clk = &clcd_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
{ .dev_id = "i2c", .clk = &i2c_clk},
{ .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
@ -427,8 +686,50 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .dev_id = "c3", .clk = &c3_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
{ .dev_id = "ssp", .clk = &ssp_clk},
{ .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "gpio", .clk = &gpio_clk},
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
{ .dev_id = "physmap-flash", .clk = &emi_clk},
#endif
#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
defined(CONFIG_MACH_SPEAR320)
{ .con_id = "fsmc", .clk = &fsmc_clk},
#endif
/* common clocks to spear310 and spear320 */
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "uart2", .clk = &uart2_clk},
#endif
/* common clock to spear300 and spear320 */
#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
{ .dev_id = "clcd", .clk = &clcd_clk},
{ .dev_id = "sdhci", .clk = &sdhci_clk},
#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
/* spear300 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR300
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "keyboard", .clk = &kbd_clk},
#endif
/* spear310 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR310
{ .dev_id = "uart3", .clk = &uart3_clk},
{ .dev_id = "uart4", .clk = &uart4_clk},
{ .dev_id = "uart5", .clk = &uart5_clk},
#endif
/* spear320 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR320
{ .dev_id = "c_can_platform.0", .clk = &can0_clk},
{ .dev_id = "c_can_platform.1", .clk = &can1_clk},
{ .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
{ .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
{ .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "pwm", .clk = &pwm_clk},
#endif
};
void __init clk_init(void)

View File

@ -63,8 +63,8 @@
#define GPT1_CLK_SHIFT 11
#define GPT2_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
#define AUX_CLK_PLL3_MASK 0
#define AUX_CLK_PLL1_MASK 1
#define AUX_CLK_PLL3_VAL 0
#define AUX_CLK_PLL1_VAL 1
#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
@ -113,6 +113,7 @@
#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0

View File

@ -60,12 +60,22 @@ static struct pll_clk_config pll1_config = {
.masks = &pll1_masks,
};
/* pll rate configuration table, in ascending order of rates */
struct pll_rate_tbl pll_rtbl[] = {
{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
.flags = ENABLED_ON_INIT,
.pclk = &osc_30m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
.calc_rate = &pll_calc_rate,
.recalc = &pll_clk_recalc,
.set_rate = &pll_clk_set_rate,
.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
@ -103,35 +113,25 @@ static struct bus_clk_config ahb_config = {
.masks = &ahb_masks,
};
/* ahb rate configuration table, in ascending order of rates */
struct bus_rate_tbl bus_rtbl[] = {
{.div = 3}, /* == parent divided by 4 */
{.div = 2}, /* == parent divided by 3 */
{.div = 1}, /* == parent divided by 2 */
{.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
.set_rate = &bus_clk_set_rate,
.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
.pclk = &pll1_clk,
.pclk_mask = AUX_CLK_PLL1_MASK,
.scalable = 1,
}, {
.pclk = &pll3_48m_clk,
.pclk_mask = AUX_CLK_PLL3_MASK,
.scalable = 0,
},
};
/* uart parent select structure */
static struct pclk_sel uart_pclk_sel = {
.pclk_info = uart_pclk_info,
.pclk_count = ARRAY_SIZE(uart_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = UART_CLK_MASK,
};
/* auxiliary synthesizers masks */
static struct aux_clk_masks aux_masks = {
.eq_sel_mask = AUX_EQ_SEL_MASK,
@ -145,19 +145,57 @@ static struct aux_clk_masks aux_masks = {
};
/* uart configurations */
static struct aux_clk_config uart_config = {
static struct aux_clk_config uart_synth_config = {
.synth_reg = UART_CLK_SYNT,
.masks = &aux_masks,
};
/* aux rate configuration table, in ascending order of rates */
struct aux_rate_tbl aux_rtbl[] = {
/* For PLL1 = 332 MHz */
{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
};
/* uart synth clock */
static struct clk uart_synth_clk = {
.en_reg = UART_CLK_SYNT,
.en_reg_bit = AUX_SYNT_ENB,
.pclk = &pll1_clk,
.calc_rate = &aux_calc_rate,
.recalc = &aux_clk_recalc,
.set_rate = &aux_clk_set_rate,
.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
.private_data = &uart_synth_config,
};
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
.pclk = &uart_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* uart parent select structure */
static struct pclk_sel uart_pclk_sel = {
.pclk_info = uart_pclk_info,
.pclk_count = ARRAY_SIZE(uart_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = UART_CLK_MASK,
};
/* uart0 clock */
static struct clk uart0_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = UART0_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
.recalc = &aux_clk_recalc,
.private_data = &uart_config,
.recalc = &follow_parent,
};
/* uart1 clock */
@ -166,26 +204,35 @@ static struct clk uart1_clk = {
.en_reg_bit = UART1_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
.recalc = &aux_clk_recalc,
.private_data = &uart_config,
.recalc = &follow_parent,
};
/* firda configurations */
static struct aux_clk_config firda_config = {
static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
.masks = &aux_masks,
};
/* firda synth clock */
static struct clk firda_synth_clk = {
.en_reg = FIRDA_CLK_SYNT,
.en_reg_bit = AUX_SYNT_ENB,
.pclk = &pll1_clk,
.calc_rate = &aux_calc_rate,
.recalc = &aux_clk_recalc,
.set_rate = &aux_clk_set_rate,
.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
.private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
.pclk = &pll1_clk,
.pclk_mask = AUX_CLK_PLL1_MASK,
.scalable = 1,
.pclk = &firda_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_mask = AUX_CLK_PLL3_MASK,
.scalable = 0,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
@ -203,26 +250,35 @@ static struct clk firda_clk = {
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
.recalc = &aux_clk_recalc,
.private_data = &firda_config,
.recalc = &follow_parent,
};
/* clcd configurations */
static struct aux_clk_config clcd_config = {
static struct aux_clk_config clcd_synth_config = {
.synth_reg = CLCD_CLK_SYNT,
.masks = &aux_masks,
};
/* firda synth clock */
static struct clk clcd_synth_clk = {
.en_reg = CLCD_CLK_SYNT,
.en_reg_bit = AUX_SYNT_ENB,
.pclk = &pll1_clk,
.calc_rate = &aux_calc_rate,
.recalc = &aux_clk_recalc,
.set_rate = &aux_clk_set_rate,
.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
.private_data = &clcd_synth_config,
};
/* clcd parents */
static struct pclk_info clcd_pclk_info[] = {
{
.pclk = &pll1_clk,
.pclk_mask = AUX_CLK_PLL1_MASK,
.scalable = 1,
.pclk = &clcd_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_mask = AUX_CLK_PLL3_MASK,
.scalable = 0,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
@ -240,29 +296,7 @@ static struct clk clcd_clk = {
.en_reg_bit = CLCD_CLK_ENB,
.pclk_sel = &clcd_pclk_sel,
.pclk_sel_shift = CLCD_CLK_SHIFT,
.recalc = &aux_clk_recalc,
.private_data = &clcd_config,
};
/* gpt parents */
static struct pclk_info gpt_pclk_info[] = {
{
.pclk = &pll1_clk,
.pclk_mask = AUX_CLK_PLL1_MASK,
.scalable = 1,
}, {
.pclk = &pll3_48m_clk,
.pclk_mask = AUX_CLK_PLL3_MASK,
.scalable = 0,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt_pclk_sel = {
.pclk_info = gpt_pclk_info,
.pclk_count = ARRAY_SIZE(gpt_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
.recalc = &follow_parent,
};
/* gpt synthesizer masks */
@ -273,60 +307,162 @@ static struct gpt_clk_masks gpt_masks = {
.nscale_sel_shift = GPT_NSCALE_SHIFT,
};
/* gpt0_1 configurations */
static struct gpt_clk_config gpt0_1_config = {
/* gpt rate configuration table, in ascending order of rates */
struct gpt_rate_tbl gpt_rtbl[] = {
/* For pll1 = 332 MHz */
{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
{.mscale = 1, .nscale = 0}, /* 83 MHz */
};
/* gpt0 synth clk config*/
static struct gpt_clk_config gpt0_synth_config = {
.synth_reg = PRSC1_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt synth clock */
static struct clk gpt0_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt0_synth_config,
};
/* gpt parents */
static struct pclk_info gpt0_pclk_info[] = {
{
.pclk = &gpt0_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt0_pclk_sel = {
.pclk_info = gpt0_pclk_info,
.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt0 ARM1 subsystem timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
.pclk_sel = &gpt_pclk_sel,
.pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
.recalc = &gpt_clk_recalc,
.private_data = &gpt0_1_config,
.recalc = &follow_parent,
};
/* Note: gpt0 and gpt1 share same parent clocks */
/* gpt parent select structure */
static struct pclk_sel gpt1_pclk_sel = {
.pclk_info = gpt0_pclk_info,
.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.flags = ALWAYS_ENABLED,
.pclk_sel = &gpt_pclk_sel,
.pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
.recalc = &gpt_clk_recalc,
.private_data = &gpt0_1_config,
.recalc = &follow_parent,
};
/* gpt2 configurations */
static struct gpt_clk_config gpt2_config = {
/* gpt2 synth clk config*/
static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT2_CLK_ENB,
.pclk_sel = &gpt_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
/* gpt synth clock */
static struct clk gpt2_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.private_data = &gpt2_config,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt2_synth_config,
};
/* gpt3 configurations */
static struct gpt_clk_config gpt3_config = {
/* gpt parents */
static struct pclk_info gpt2_pclk_info[] = {
{
.pclk = &gpt2_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt2_pclk_sel = {
.pclk_info = gpt2_pclk_info,
.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
.flags = ALWAYS_ENABLED,
.pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
.recalc = &follow_parent,
};
/* gpt3 synth clk config*/
static struct gpt_clk_config gpt3_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt synth clock */
static struct clk gpt3_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt3_synth_config,
};
/* gpt parents */
static struct pclk_info gpt3_pclk_info[] = {
{
.pclk = &gpt3_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt3_pclk_sel = {
.pclk_info = gpt3_pclk_info,
.pclk_count = ARRAY_SIZE(gpt3_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt3 timer clock */
static struct clk gpt3_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT3_CLK_ENB,
.pclk_sel = &gpt_pclk_sel,
.flags = ALWAYS_ENABLED,
.pclk_sel = &gpt3_pclk_sel,
.pclk_sel_shift = GPT3_CLK_SHIFT,
.recalc = &gpt_clk_recalc,
.private_data = &gpt3_config,
.recalc = &follow_parent,
};
/* clock derived from pll3 clk */
@ -371,7 +507,10 @@ static struct bus_clk_config apb_config = {
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
.set_rate = &bus_clk_set_rate,
.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
@ -488,7 +627,7 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
/* clock derived from 32 KHz os clk */
{ .dev_id = "rtc", .clk = &rtc_clk},
{ .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 30 MHz os clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
@ -496,6 +635,12 @@ static struct clk_lookup spear_clk_lookups[] = {
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
{ .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
{ .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
{ .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk},
{ .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
{ .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
{ .dev_id = "uart0", .clk = &uart0_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "firda", .clk = &firda_clk},
@ -505,22 +650,22 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .dev_id = "gpt2", .clk = &gpt2_clk},
{ .dev_id = "gpt3", .clk = &gpt3_clk},
/* clock derived from pll3 clk */
{ .dev_id = "usbh0", .clk = &usbh0_clk},
{ .dev_id = "usbh1", .clk = &usbh1_clk},
{ .con_id = "usbh.0_clk", .clk = &usbh0_clk},
{ .con_id = "usbh.1_clk", .clk = &usbh1_clk},
{ .dev_id = "usbd", .clk = &usbd_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
{ .dev_id = "i2c", .clk = &i2c_clk},
{ .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
{ .dev_id = "fsmc", .clk = &fsmc_clk},
{ .con_id = "fsmc", .clk = &fsmc_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
{ .dev_id = "ssp0", .clk = &ssp0_clk},
{ .dev_id = "ssp1", .clk = &ssp1_clk},
{ .dev_id = "ssp2", .clk = &ssp2_clk},
{ .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
{ .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "gpio0", .clk = &gpio0_clk},
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "gpio2", .clk = &gpio2_clk},

View File

@ -66,8 +66,8 @@
#define GPT2_CLK_SHIFT 11
#define GPT3_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
#define AUX_CLK_PLL3_MASK 0
#define AUX_CLK_PLL1_MASK 1
#define AUX_CLK_PLL3_VAL 0
#define AUX_CLK_PLL1_VAL 1
#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
@ -123,6 +123,7 @@
#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0

View File

@ -12,6 +12,7 @@
*/
#include <linux/bug.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/list.h>
@ -22,7 +23,7 @@
static DEFINE_SPINLOCK(clocks_lock);
static LIST_HEAD(root_clks);
static void propagate_rate(struct list_head *);
static void propagate_rate(struct clk *, int on_init);
static int generic_clk_enable(struct clk *clk)
{
@ -64,6 +65,100 @@ static struct clkops generic_clkops = {
.disable = generic_clk_disable,
};
/* returns current programmed clocks clock info structure */
static struct pclk_info *pclk_info_get(struct clk *clk)
{
unsigned int val, i;
struct pclk_info *info = NULL;
val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
& clk->pclk_sel->pclk_sel_mask;
for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
if (clk->pclk_sel->pclk_info[i].pclk_val == val)
info = &clk->pclk_sel->pclk_info[i];
}
return info;
}
/*
* Set Update pclk, and pclk_info of clk and add clock sibling node to current
* parents children list
*/
static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
{
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
list_del(&clk->sibling);
list_add(&clk->sibling, &pclk_info->pclk->children);
clk->pclk = pclk_info->pclk;
spin_unlock_irqrestore(&clocks_lock, flags);
}
static void do_clk_disable(struct clk *clk)
{
if (!clk)
return;
if (!clk->usage_count) {
WARN_ON(1);
return;
}
clk->usage_count--;
if (clk->usage_count == 0) {
/*
* Surely, there are no active childrens or direct users
* of this clock
*/
if (clk->pclk)
do_clk_disable(clk->pclk);
if (clk->ops && clk->ops->disable)
clk->ops->disable(clk);
}
}
static int do_clk_enable(struct clk *clk)
{
int ret = 0;
if (!clk)
return -EFAULT;
if (clk->usage_count == 0) {
if (clk->pclk) {
ret = do_clk_enable(clk->pclk);
if (ret)
goto err;
}
if (clk->ops && clk->ops->enable) {
ret = clk->ops->enable(clk);
if (ret) {
if (clk->pclk)
do_clk_disable(clk->pclk);
goto err;
}
}
/*
* Since the clock is going to be used for the first
* time please reclac
*/
if (clk->recalc) {
ret = clk->recalc(clk);
if (ret)
goto err;
}
}
clk->usage_count++;
err:
return ret;
}
/*
* clk_enable - inform the system when the clock source should be running.
* @clk: clock source
@ -77,17 +172,9 @@ int clk_enable(struct clk *clk)
unsigned long flags;
int ret = 0;
if (!clk || IS_ERR(clk))
return -EFAULT;
spin_lock_irqsave(&clocks_lock, flags);
if (clk->usage_count == 0) {
if (clk->ops && clk->ops->enable)
ret = clk->ops->enable(clk);
}
clk->usage_count++;
ret = do_clk_enable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
return ret;
}
EXPORT_SYMBOL(clk_enable);
@ -108,17 +195,8 @@ void clk_disable(struct clk *clk)
{
unsigned long flags;
if (!clk || IS_ERR(clk))
return;
WARN_ON(clk->usage_count == 0);
spin_lock_irqsave(&clocks_lock, flags);
clk->usage_count--;
if (clk->usage_count == 0) {
if (clk->ops && clk->ops->disable)
clk->ops->disable(clk);
}
do_clk_disable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@ -152,15 +230,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
int i, found = 0, val = 0;
unsigned long flags;
if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
if (!clk || !parent)
return -EFAULT;
if (clk->usage_count)
return -EBUSY;
if (!clk->pclk_sel)
return -EPERM;
if (clk->pclk == parent)
return 0;
if (!clk->pclk_sel)
return -EPERM;
/* check if requested parent is in clk parent list */
for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
if (clk->pclk_sel->pclk_info[i].pclk == parent) {
found = 1;
@ -175,13 +252,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
/* reflect parent change in hardware */
val = readl(clk->pclk_sel->pclk_sel_reg);
val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
writel(val, clk->pclk_sel->pclk_sel_reg);
spin_unlock_irqrestore(&clocks_lock, flags);
/* reflect parent change in software */
clk->recalc(clk);
propagate_rate(&clk->children);
clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
propagate_rate(clk, 0);
return 0;
}
EXPORT_SYMBOL(clk_set_parent);
@ -195,19 +273,37 @@ EXPORT_SYMBOL(clk_set_parent);
*/
int clk_set_rate(struct clk *clk, unsigned long rate)
{
/* TODO */
return -EINVAL;
unsigned long flags;
int ret = -EINVAL;
if (!clk || !rate)
return -EFAULT;
if (clk->set_rate) {
spin_lock_irqsave(&clocks_lock, flags);
ret = clk->set_rate(clk, rate);
if (!ret)
/* if successful -> propagate */
propagate_rate(clk, 0);
spin_unlock_irqrestore(&clocks_lock, flags);
} else if (clk->pclk) {
u32 mult = clk->div_factor ? clk->div_factor : 1;
ret = clk_set_rate(clk->pclk, mult * rate);
}
return ret;
}
EXPORT_SYMBOL(clk_set_rate);
/* registers clock in platform clock framework */
void clk_register(struct clk_lookup *cl)
{
struct clk *clk = cl->clk;
struct clk *clk;
unsigned long flags;
if (!clk || IS_ERR(clk))
if (!cl || !cl->clk)
return;
clk = cl->clk;
spin_lock_irqsave(&clocks_lock, flags);
@ -220,15 +316,24 @@ void clk_register(struct clk_lookup *cl)
/* root clock don't have any parents */
if (!clk->pclk && !clk->pclk_sel) {
list_add(&clk->sibling, &root_clks);
/* add clocks with only one parent to parent's children list */
} else if (clk->pclk && !clk->pclk_sel) {
/* add clocks with only one parent to parent's children list */
list_add(&clk->sibling, &clk->pclk->children);
} else {
/* add clocks with > 1 parent to 1st parent's children list */
clk->pclk = clk->pclk_sel->pclk_info[0].pclk;
list_add(&clk->sibling,
&clk->pclk_sel->pclk_info[0].pclk->children);
/* clocks with more than one parent */
struct pclk_info *pclk_info;
pclk_info = pclk_info_get(clk);
if (!pclk_info) {
pr_err("CLKDEV: invalid pclk info of clk with"
" %s dev_id and %s con_id\n",
cl->dev_id, cl->con_id);
} else {
clk->pclk = pclk_info->pclk;
list_add(&clk->sibling, &pclk_info->pclk->children);
}
}
spin_unlock_irqrestore(&clocks_lock, flags);
/* add clock to arm clockdev framework */
@ -236,56 +341,142 @@ void clk_register(struct clk_lookup *cl)
}
/**
* propagate_rate - recalculate and propagate all clocks in list head
* propagate_rate - recalculate and propagate all clocks to children
* @pclk: parent clock required to be propogated
* @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
*
* Recalculates all root clocks in list head, which if the clock's .recalc is
* set correctly, should also propagate their rates.
* Recalculates all children clocks
*/
static void propagate_rate(struct list_head *lhead)
void propagate_rate(struct clk *pclk, int on_init)
{
struct clk *clkp, *_temp;
struct clk *clk, *_temp;
int ret = 0;
list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
if (clkp->recalc)
clkp->recalc(clkp);
propagate_rate(&clkp->children);
list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
if (clk->recalc) {
ret = clk->recalc(clk);
/*
* recalc will return error if clk out is not programmed
* In this case configure default rate.
*/
if (ret && clk->set_rate)
clk->set_rate(clk, 0);
}
propagate_rate(clk, on_init);
if (!on_init)
continue;
/* Enable clks enabled on init, in software view */
if (clk->flags & ENABLED_ON_INIT)
do_clk_enable(clk);
}
}
/* returns current programmed clocks clock info structure */
static struct pclk_info *pclk_info_get(struct clk *clk)
/**
* round_rate_index - return closest programmable rate index in rate_config tbl
* @clk: ptr to clock structure
* @drate: desired rate
* @rate: final rate will be returned in this variable only.
*
* Finds index in rate_config for highest clk rate which is less than
* requested rate. If there is no clk rate lesser than requested rate then
* -EINVAL is returned. This routine assumes that rate_config is written
* in incrementing order of clk rates.
* If drate passed is zero then default rate is programmed.
*/
static int
round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
{
unsigned int mask, i;
unsigned long flags;
struct pclk_info *info = NULL;
unsigned long tmp = 0, prev_rate = 0;
int index;
spin_lock_irqsave(&clocks_lock, flags);
mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
& clk->pclk_sel->pclk_sel_mask;
if (!clk->calc_rate)
return -EFAULT;
for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
info = &clk->pclk_sel->pclk_info[i];
if (!drate)
return -EINVAL;
/*
* This loops ends on two conditions:
* - as soon as clk is found with rate greater than requested rate.
* - if all clks in rate_config are smaller than requested rate.
*/
for (index = 0; index < clk->rate_config.count; index++) {
prev_rate = tmp;
tmp = clk->calc_rate(clk, index);
if (drate < tmp) {
index--;
break;
}
}
spin_unlock_irqrestore(&clocks_lock, flags);
/* return if can't find suitable clock */
if (index < 0) {
index = -EINVAL;
*rate = 0;
} else if (index == clk->rate_config.count) {
/* program with highest clk rate possible */
index = clk->rate_config.count - 1;
*rate = tmp;
} else
*rate = prev_rate;
return info;
return index;
}
/**
* clk_round_rate - adjust a rate to the exact rate a clock can provide
* @clk: clock source
* @rate: desired clock rate in Hz
*
* Returns rounded clock rate in Hz, or negative errno.
*/
long clk_round_rate(struct clk *clk, unsigned long drate)
{
long rate = 0;
int index;
/*
* propagate call to parent who supports calc_rate. Similar approach is
* used in clk_set_rate.
*/
if (!clk->calc_rate) {
u32 mult;
if (!clk->pclk)
return clk->rate;
mult = clk->div_factor ? clk->div_factor : 1;
return clk_round_rate(clk->pclk, mult * drate) / mult;
}
index = round_rate_index(clk, drate, &rate);
if (index >= 0)
return rate;
else
return index;
}
EXPORT_SYMBOL(clk_round_rate);
/*All below functions are called with lock held */
/*
* Set pclk as cclk's parent and add clock sibling node to current parents
* children list
* Calculates pll clk rate for specific value of mode, m, n and p
*
* In normal mode
* rate = (2 * M[15:8] * Fin)/(N * 2^P)
*
* In Dithered mode
* rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
*/
static void change_parent(struct clk *cclk, struct clk *pclk)
unsigned long pll_calc_rate(struct clk *clk, int index)
{
unsigned long flags;
unsigned long rate = clk->pclk->rate;
struct pll_rate_tbl *tbls = clk->rate_config.tbls;
unsigned int mode;
spin_lock_irqsave(&clocks_lock, flags);
list_del(&cclk->sibling);
list_add(&cclk->sibling, &pclk->children);
cclk->pclk = pclk;
spin_unlock_irqrestore(&clocks_lock, flags);
mode = tbls[index].mode ? 256 : 1;
return (((2 * rate / 10000) * tbls[index].m) /
(mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
}
/*
@ -297,13 +488,11 @@ static void change_parent(struct clk *cclk, struct clk *pclk)
* In Dithered mode
* rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
*/
void pll_clk_recalc(struct clk *clk)
int pll_clk_recalc(struct clk *clk)
{
struct pll_clk_config *config = clk->private_data;
unsigned int num = 2, den = 0, val, mode = 0;
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
config->masks->mode_mask;
@ -325,22 +514,120 @@ void pll_clk_recalc(struct clk *clk)
den *= 256;
}
if (!den)
return -EINVAL;
clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
/*
* Configures new clock rate of pll
*/
int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
{
struct pll_rate_tbl *tbls = clk->rate_config.tbls;
struct pll_clk_config *config = clk->private_data;
unsigned long val, rate;
int i;
i = round_rate_index(clk, desired_rate, &rate);
if (i < 0)
return i;
val = readl(config->mode_reg) &
~(config->masks->mode_mask << config->masks->mode_shift);
val |= (tbls[i].mode & config->masks->mode_mask) <<
config->masks->mode_shift;
writel(val, config->mode_reg);
val = readl(config->cfg_reg) &
~(config->masks->div_p_mask << config->masks->div_p_shift);
val |= (tbls[i].p & config->masks->div_p_mask) <<
config->masks->div_p_shift;
val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
val |= (tbls[i].n & config->masks->div_n_mask) <<
config->masks->div_n_shift;
val &= ~(config->masks->dith_fdbk_m_mask <<
config->masks->dith_fdbk_m_shift);
if (tbls[i].mode)
val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
config->masks->dith_fdbk_m_shift;
else
val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
config->masks->norm_fdbk_m_shift;
writel(val, config->cfg_reg);
clk->rate = rate;
return 0;
}
/*
* Calculates ahb, apb clk rate for specific value of div
*/
unsigned long bus_calc_rate(struct clk *clk, int index)
{
unsigned long rate = clk->pclk->rate;
struct bus_rate_tbl *tbls = clk->rate_config.tbls;
return rate / (tbls[index].div + 1);
}
/* calculates current programmed rate of ahb or apb bus */
void bus_clk_recalc(struct clk *clk)
int bus_clk_recalc(struct clk *clk)
{
struct bus_clk_config *config = clk->private_data;
unsigned int div;
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
div = ((readl(config->reg) >> config->masks->shift) &
config->masks->mask) + 1;
if (!div)
return -EINVAL;
clk->rate = (unsigned long)clk->pclk->rate / div;
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
/* Configures new clock rate of AHB OR APB bus */
int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
{
struct bus_rate_tbl *tbls = clk->rate_config.tbls;
struct bus_clk_config *config = clk->private_data;
unsigned long val, rate;
int i;
i = round_rate_index(clk, desired_rate, &rate);
if (i < 0)
return i;
val = readl(config->reg) &
~(config->masks->mask << config->masks->shift);
val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
writel(val, config->reg);
clk->rate = rate;
return 0;
}
/*
* gives rate for different values of eq, x and y
*
* Fout from synthesizer can be given from two equations:
* Fout1 = (Fin * X/Y)/2 EQ1
* Fout2 = Fin * X/Y EQ2
*/
unsigned long aux_calc_rate(struct clk *clk, int index)
{
unsigned long rate = clk->pclk->rate;
struct aux_rate_tbl *tbls = clk->rate_config.tbls;
u8 eq = tbls[index].eq ? 1 : 2;
return (((rate/10000) * tbls[index].xscale) /
(tbls[index].yscale * eq)) * 10000;
}
/*
@ -353,47 +640,76 @@ void bus_clk_recalc(struct clk *clk)
*
* Selection of eqn 1 or 2 is programmed in register
*/
void aux_clk_recalc(struct clk *clk)
int aux_clk_recalc(struct clk *clk)
{
struct aux_clk_config *config = clk->private_data;
struct pclk_info *pclk_info = NULL;
unsigned int num = 1, den = 1, val, eqn;
unsigned long flags;
/* get current programmed parent */
pclk_info = pclk_info_get(clk);
if (!pclk_info) {
spin_lock_irqsave(&clocks_lock, flags);
clk->pclk = NULL;
clk->rate = 0;
spin_unlock_irqrestore(&clocks_lock, flags);
return;
}
val = readl(config->synth_reg);
change_parent(clk, pclk_info->pclk);
eqn = (val >> config->masks->eq_sel_shift) &
config->masks->eq_sel_mask;
if (eqn == config->masks->eq1_mask)
den *= 2;
spin_lock_irqsave(&clocks_lock, flags);
if (pclk_info->scalable) {
val = readl(config->synth_reg);
/* calculate numerator */
num = (val >> config->masks->xscale_sel_shift) &
config->masks->xscale_sel_mask;
eqn = (val >> config->masks->eq_sel_shift) &
config->masks->eq_sel_mask;
if (eqn == config->masks->eq1_mask)
den *= 2;
/* calculate denominator */
den *= (val >> config->masks->yscale_sel_shift) &
config->masks->yscale_sel_mask;
/* calculate numerator */
num = (val >> config->masks->xscale_sel_shift) &
config->masks->xscale_sel_mask;
if (!den)
return -EINVAL;
/* calculate denominator */
den *= (val >> config->masks->yscale_sel_shift) &
config->masks->yscale_sel_mask;
val = (((clk->pclk->rate/10000) * num) / den) * 10000;
} else
val = clk->pclk->rate;
clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
return 0;
}
clk->rate = val;
spin_unlock_irqrestore(&clocks_lock, flags);
/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
{
struct aux_rate_tbl *tbls = clk->rate_config.tbls;
struct aux_clk_config *config = clk->private_data;
unsigned long val, rate;
int i;
i = round_rate_index(clk, desired_rate, &rate);
if (i < 0)
return i;
val = readl(config->synth_reg) &
~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
config->masks->eq_sel_shift;
val &= ~(config->masks->xscale_sel_mask <<
config->masks->xscale_sel_shift);
val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
config->masks->xscale_sel_shift;
val &= ~(config->masks->yscale_sel_mask <<
config->masks->yscale_sel_shift);
val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
config->masks->yscale_sel_shift;
writel(val, config->synth_reg);
clk->rate = rate;
return 0;
}
/*
* Calculates gpt clk rate for different values of mscale and nscale
*
* Fout= Fin/((2 ^ (N+1)) * (M+1))
*/
unsigned long gpt_calc_rate(struct clk *clk, int index)
{
unsigned long rate = clk->pclk->rate;
struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
return rate / ((1 << (tbls[index].nscale + 1)) *
(tbls[index].mscale + 1));
}
/*
@ -401,49 +717,142 @@ void aux_clk_recalc(struct clk *clk)
* Fout from synthesizer can be given from below equations:
* Fout= Fin/((2 ^ (N+1)) * (M+1))
*/
void gpt_clk_recalc(struct clk *clk)
int gpt_clk_recalc(struct clk *clk)
{
struct gpt_clk_config *config = clk->private_data;
struct pclk_info *pclk_info = NULL;
unsigned int div = 1, val;
unsigned long flags;
pclk_info = pclk_info_get(clk);
if (!pclk_info) {
spin_lock_irqsave(&clocks_lock, flags);
clk->pclk = NULL;
clk->rate = 0;
spin_unlock_irqrestore(&clocks_lock, flags);
return;
}
val = readl(config->synth_reg);
div += (val >> config->masks->mscale_sel_shift) &
config->masks->mscale_sel_mask;
div *= 1 << (((val >> config->masks->nscale_sel_shift) &
config->masks->nscale_sel_mask) + 1);
change_parent(clk, pclk_info->pclk);
spin_lock_irqsave(&clocks_lock, flags);
if (pclk_info->scalable) {
val = readl(config->synth_reg);
div += (val >> config->masks->mscale_sel_shift) &
config->masks->mscale_sel_mask;
div *= 1 << (((val >> config->masks->nscale_sel_shift) &
config->masks->nscale_sel_mask) + 1);
}
if (!div)
return -EINVAL;
clk->rate = (unsigned long)clk->pclk->rate / div;
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
{
struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
struct gpt_clk_config *config = clk->private_data;
unsigned long val, rate;
int i;
i = round_rate_index(clk, desired_rate, &rate);
if (i < 0)
return i;
val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
config->masks->mscale_sel_shift);
val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
config->masks->mscale_sel_shift;
val &= ~(config->masks->nscale_sel_mask <<
config->masks->nscale_sel_shift);
val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
config->masks->nscale_sel_shift;
writel(val, config->synth_reg);
clk->rate = rate;
return 0;
}
/*
* Calculates clcd clk rate for different values of div
*
* Fout from synthesizer can be given from below equation:
* Fout= Fin/2*div (division factor)
* div is 17 bits:-
* 0-13 (fractional part)
* 14-16 (integer part)
* To calculate Fout we left shift val by 14 bits and divide Fin by
* complete div (including fractional part) and then right shift the
* result by 14 places.
*/
unsigned long clcd_calc_rate(struct clk *clk, int index)
{
unsigned long rate = clk->pclk->rate;
struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
rate /= 1000;
rate <<= 12;
rate /= (2 * tbls[index].div);
rate >>= 12;
rate *= 1000;
return rate;
}
/*
* calculates current programmed rate of clcd synthesizer
* Fout from synthesizer can be given from below equation:
* Fout= Fin/2*div (division factor)
* div is 17 bits:-
* 0-13 (fractional part)
* 14-16 (integer part)
* To calculate Fout we left shift val by 14 bits and divide Fin by
* complete div (including fractional part) and then right shift the
* result by 14 places.
*/
int clcd_clk_recalc(struct clk *clk)
{
struct clcd_clk_config *config = clk->private_data;
unsigned int div = 1;
unsigned long prate;
unsigned int val;
val = readl(config->synth_reg);
div = (val >> config->masks->div_factor_shift) &
config->masks->div_factor_mask;
if (!div)
return -EINVAL;
prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
clk->rate *= 1000;
return 0;
}
/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
{
struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
struct clcd_clk_config *config = clk->private_data;
unsigned long val, rate;
int i;
i = round_rate_index(clk, desired_rate, &rate);
if (i < 0)
return i;
val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
config->masks->div_factor_shift);
val |= (tbls[i].div & config->masks->div_factor_mask) <<
config->masks->div_factor_shift;
writel(val, config->synth_reg);
clk->rate = rate;
return 0;
}
/*
* Used for clocks that always have value as the parent clock divided by a
* fixed divisor
*/
void follow_parent(struct clk *clk)
int follow_parent(struct clk *clk)
{
unsigned long flags;
unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
spin_lock_irqsave(&clocks_lock, flags);
clk->rate = clk->pclk->rate/div_factor;
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
/**
@ -454,5 +863,25 @@ void follow_parent(struct clk *clk)
*/
void recalc_root_clocks(void)
{
propagate_rate(&root_clks);
struct clk *pclk;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&clocks_lock, flags);
list_for_each_entry(pclk, &root_clks, sibling) {
if (pclk->recalc) {
ret = pclk->recalc(pclk);
/*
* recalc will return error if clk out is not programmed
* In this case configure default clock.
*/
if (ret && pclk->set_rate)
pclk->set_rate(pclk, 0);
}
propagate_rate(pclk, 1);
/* Enable clks enabled on init, in software view */
if (pclk->flags & ENABLED_ON_INIT)
do_clk_enable(pclk);
}
spin_unlock_irqrestore(&clocks_lock, flags);
}

View File

@ -21,6 +21,7 @@
/* clk structure flags */
#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */
/**
* struct clkops - clock operations
@ -35,13 +36,11 @@ struct clkops {
/**
* struct pclk_info - parents info
* @pclk: pointer to parent clk
* @pclk_mask: value to be written for selecting this parent
* @scalable: Is parent scalable (1 - YES, 0 - NO)
* @pclk_val: value to be written for selecting this parent
*/
struct pclk_info {
struct clk *pclk;
u8 pclk_mask;
u8 scalable;
u8 pclk_val;
};
/**
@ -58,6 +57,18 @@ struct pclk_sel {
unsigned int pclk_sel_mask;
};
/**
* struct rate_config - clk rate configurations
* @tbls: array of device specific clk rate tables, in ascending order of rates
* @count: size of tbls array
* @default_index: default setting when originally disabled
*/
struct rate_config {
void *tbls;
u8 count;
u8 default_index;
};
/**
* struct clk - clock structure
* @usage_count: num of users who enabled this clock
@ -67,7 +78,10 @@ struct pclk_sel {
* @en_reg_bit: clk enable/disable bit
* @ops: clk enable/disable ops - generic_clkops selected if NULL
* @recalc: pointer to clock rate recalculate function
* @div_factor: division factor to parent clock. Only for recalc = follow_parent
* @set_rate: pointer to clock set rate function
* @calc_rate: pointer to clock get rate function for index
* @rate_config: rate configuration information, used by set_rate
* @div_factor: division factor to parent clock.
* @pclk: current parent clk
* @pclk_sel: pointer to parent selection structure
* @pclk_sel_shift: register shift for selecting parent of this clock
@ -82,7 +96,10 @@ struct clk {
void __iomem *en_reg;
u8 en_reg_bit;
const struct clkops *ops;
void (*recalc) (struct clk *);
int (*recalc) (struct clk *);
int (*set_rate) (struct clk *, unsigned long rate);
unsigned long (*calc_rate)(struct clk *, int index);
struct rate_config rate_config;
unsigned int div_factor;
struct clk *pclk;
@ -115,6 +132,14 @@ struct pll_clk_config {
struct pll_clk_masks *masks;
};
/* pll clk rate config structure */
struct pll_rate_tbl {
u8 mode;
u16 m;
u8 n;
u8 p;
};
/* ahb and apb bus configuration structure */
struct bus_clk_masks {
u32 mask;
@ -126,6 +151,11 @@ struct bus_clk_config {
struct bus_clk_masks *masks;
};
/* ahb and apb clk bus rate config structure */
struct bus_rate_tbl {
u8 div;
};
/* Aux clk configuration structure: applicable to UART and FIRDA */
struct aux_clk_masks {
u32 eq_sel_mask;
@ -143,6 +173,13 @@ struct aux_clk_config {
struct aux_clk_masks *masks;
};
/* aux clk rate config structure */
struct aux_rate_tbl {
u16 xscale;
u16 yscale;
u8 eq;
};
/* GPT clk configuration structure */
struct gpt_clk_masks {
u32 mscale_sel_mask;
@ -156,15 +193,48 @@ struct gpt_clk_config {
struct gpt_clk_masks *masks;
};
/* gpt clk rate config structure */
struct gpt_rate_tbl {
u16 mscale;
u16 nscale;
};
/* clcd clk configuration structure */
struct clcd_synth_masks {
u32 div_factor_mask;
u32 div_factor_shift;
};
struct clcd_clk_config {
void __iomem *synth_reg;
struct clcd_synth_masks *masks;
};
/* clcd clk rate config structure */
struct clcd_rate_tbl {
u16 div;
};
/* platform specific clock functions */
void clk_register(struct clk_lookup *cl);
void recalc_root_clocks(void);
/* clock recalc functions */
void follow_parent(struct clk *clk);
void pll_clk_recalc(struct clk *clk);
void bus_clk_recalc(struct clk *clk);
void gpt_clk_recalc(struct clk *clk);
void aux_clk_recalc(struct clk *clk);
/* clock recalc & set rate functions */
int follow_parent(struct clk *clk);
unsigned long pll_calc_rate(struct clk *clk, int index);
int pll_clk_recalc(struct clk *clk);
int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
unsigned long bus_calc_rate(struct clk *clk, int index);
int bus_clk_recalc(struct clk *clk);
int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
unsigned long gpt_calc_rate(struct clk *clk, int index);
int gpt_clk_recalc(struct clk *clk);
int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
unsigned long aux_calc_rate(struct clk *clk, int index);
int aux_clk_recalc(struct clk *clk);
int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
unsigned long clcd_calc_rate(struct clk *clk, int index);
int clcd_clk_recalc(struct clk *clk);
int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
#endif /* __PLAT_CLOCK_H */