Merge branch 'remotes/lorenzo/pci/iproc'

- Work around iproc CRS completion issues (Srinath Mannam)

  - Allow smaller iproc outbound windows so driver can work on 32-bit
    systems (Srinath Mannam)

  - Use iproc-specific config read for PAXBv2 (not PAXB) (Srinath Mannam)

* remotes/lorenzo/pci/iproc:
  PCI: iproc: Enable iProc config read for PAXBv2
  PCI: iproc: Allow outbound configuration for 32-bit I/O region
  PCI: iproc: Add CRS check in config read
This commit is contained in:
Bjorn Helgaas 2019-05-13 18:34:39 -05:00
commit b138f67d7b
1 changed files with 41 additions and 5 deletions

View File

@ -60,6 +60,10 @@
#define APB_ERR_EN_SHIFT 0
#define APB_ERR_EN BIT(APB_ERR_EN_SHIFT)
#define CFG_RD_SUCCESS 0
#define CFG_RD_UR 1
#define CFG_RD_CRS 2
#define CFG_RD_CA 3
#define CFG_RETRY_STATUS 0xffff0001
#define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */
@ -289,6 +293,9 @@ enum iproc_pcie_reg {
IPROC_PCIE_IARR4,
IPROC_PCIE_IMAP4,
/* config read status */
IPROC_PCIE_CFG_RD_STATUS,
/* link status */
IPROC_PCIE_LINK_STATUS,
@ -350,6 +357,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = {
[IPROC_PCIE_IMAP3] = 0xe08,
[IPROC_PCIE_IARR4] = 0xe68,
[IPROC_PCIE_IMAP4] = 0xe70,
[IPROC_PCIE_CFG_RD_STATUS] = 0xee0,
[IPROC_PCIE_LINK_STATUS] = 0xf0c,
[IPROC_PCIE_APB_ERR_EN] = 0xf40,
};
@ -474,10 +482,12 @@ static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie,
return (pcie->base + offset);
}
static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p)
static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie,
void __iomem *cfg_data_p)
{
int timeout = CFG_RETRY_STATUS_TIMEOUT_US;
unsigned int data;
u32 status;
/*
* As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only
@ -498,6 +508,15 @@ static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p)
*/
data = readl(cfg_data_p);
while (data == CFG_RETRY_STATUS && timeout--) {
/*
* CRS state is set in CFG_RD status register
* This will handle the case where CFG_RETRY_STATUS is
* valid config data.
*/
status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS);
if (status != CFG_RD_CRS)
return data;
udelay(1);
data = readl(cfg_data_p);
}
@ -576,7 +595,7 @@ static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
if (!cfg_data_p)
return PCIBIOS_DEVICE_NOT_FOUND;
data = iproc_pcie_cfg_retry(cfg_data_p);
data = iproc_pcie_cfg_retry(pcie, cfg_data_p);
*val = data;
if (size <= 2)
@ -936,8 +955,25 @@ static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
resource_size_t window_size =
ob_map->window_sizes[size_idx] * SZ_1M;
if (size < window_size)
continue;
/*
* Keep iterating until we reach the last window and
* with the minimal window size at index zero. In this
* case, we take a compromise by mapping it using the
* minimum window size that can be supported
*/
if (size < window_size) {
if (size_idx > 0 || window_idx > 0)
continue;
/*
* For the corner case of reaching the minimal
* window size that can be supported on the
* last window
*/
axi_addr = ALIGN_DOWN(axi_addr, window_size);
pci_addr = ALIGN_DOWN(pci_addr, window_size);
size = window_size;
}
if (!IS_ALIGNED(axi_addr, window_size) ||
!IS_ALIGNED(pci_addr, window_size)) {
@ -1347,7 +1383,6 @@ static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
break;
case IPROC_PCIE_PAXB:
regs = iproc_pcie_reg_paxb;
pcie->iproc_cfg_read = true;
pcie->has_apb_err_disable = true;
if (pcie->need_ob_cfg) {
pcie->ob_map = paxb_ob_map;
@ -1356,6 +1391,7 @@ static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
break;
case IPROC_PCIE_PAXB_V2:
regs = iproc_pcie_reg_paxb_v2;
pcie->iproc_cfg_read = true;
pcie->has_apb_err_disable = true;
if (pcie->need_ob_cfg) {
pcie->ob_map = paxb_v2_ob_map;