[POWERPC] 83xx: Add base support for the MPC8313E RDB

Add support for the MPC8313E Reference Development Board (RDB).  The board
is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI,
gigabit ethernet, and serial.

Signed-off-by: Wilson Lo <Wilson.Lo@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kim Phillips 2007-02-07 22:19:12 -06:00 committed by Kumar Gala
parent 8423200553
commit b359049f27
4 changed files with 331 additions and 0 deletions

View File

@ -0,0 +1,219 @@
/*
* MPC8313E RDB Device Tree Source
*
* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8313ERDB";
compatible = "MPC83xx";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8313@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
32-bit;
};
};
memory {
device_type = "memory";
reg = <00000000 08000000>; // 128MB at 0
};
soc8313@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <200 100>;
};
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
dfsrr;
};
i2c@3100 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
dfsrr;
};
spi@7000 {
device_type = "spi";
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
interrupt-parent = <700>;
mode = <0>;
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
phy_type = "utmi_wide";
};
mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <24520>;
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <700>;
interrupts = <13 2>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@4 {
linux,phandle = <2452004>;
interrupt-parent = <700>;
interrupts = <14 2>;
reg = <4>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <25 8 24 8 23 8>;
interrupt-parent = <700>;
phy-handle = <2452001>;
};
ethernet@25000 {
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <25000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <22 8 21 8 20 8>;
interrupt-parent = <700>;
phy-handle = <2452004>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
interrupt-parent = <700>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
interrupt-parent = <700>;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
7000 0 0 1 700 12 8
7000 0 0 2 700 12 8
7000 0 0 3 700 12 8
7000 0 0 4 700 12 8
/* IDSEL 0x0F - PCI slot */
7800 0 0 1 700 11 8
7800 0 0 2 700 12 8
7800 0 0 3 700 11 8
7800 0 0 4 700 12 8>;
interrupt-parent = <700>;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
device_type = "pci";
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
interrupt-parent = <700>;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
exec-units-mask = <0000004c>;
descriptor-types-mask = <0122003f>;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
pic@700 {
linux,phandle = <700>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <700 100>;
built-in;
device_type = "ipic";
};
};
};

View File

@ -5,6 +5,12 @@ choice
prompt "Machine Type"
default MPC834x_SYS
config MPC8313_RDB
bool "Freescale MPC8313 RDB"
select DEFAULT_UIMAGE
help
This option enables support for the MPC8313 RDB board.
config MPC832x_MDS
bool "Freescale MPC832x MDS"
select DEFAULT_UIMAGE
@ -41,6 +47,12 @@ config MPC8360E_PB
endchoice
config PPC_MPC831x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC8313_RDB
config PPC_MPC832x
bool
select PPC_UDBG_16550

View File

@ -3,6 +3,7 @@
#
obj-y := misc.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o
obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o

View File

@ -0,0 +1,99 @@
/*
* arch/powerpc/platforms/83xx/mpc8313_rdb.c
*
* Description: MPC8313x RDB board specific routines.
* This file is based on mpc834x_sys.c
* Author: Lo Wlison <r43300@freescale.com>
*
* Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/pci.h>
#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include "mpc83xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc8313_rdb_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc8313_rdb_setup_arch()", 0);
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
}
void __init mpc8313_rdb_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc8313_rdb_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8313ERDB"))
return 0;
DBG("MPC8313 RDB found\n");
return 1;
}
define_machine(mpc8313_rdb) {
.name = "MPC8313 RDB",
.probe = mpc8313_rdb_probe,
.setup_arch = mpc8313_rdb_setup_arch,
.init_IRQ = mpc8313_rdb_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};