OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

mwifiex: add support for Marvell SD8897 chipset 

Some of the key differences between SD8897 and older chipsets
are as follows:

a) sdio mpa_rx and mpa_tx ports have been increased from 16 to 32
b) Same is the case with read/write bitmap that one receives from
   mpa_reg read
c) aggregation packet count doubled from 8 to 16
d) Most of key reg addresses are changed
e) There is a separate command or control port
f) Now command rx/tx_done have new interrupts

1. 'supports_sdio_new_mode' flag is added to handle (a) and (b).
2. (c) and (d) are taken care of by filling chip specific
   information in global structurei (mwifiex_sdio_sd8897).
3. For older chipsets, port 0 was cmd port and port 1->15 were
   data port. Therefore we had CTRL_PORT_MASK to differentiate
   port type. Now these changes are under 'has_control_mask' flag.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Yogesh Ashok Powar 2013-05-17 17:54:58 -07:00 committed by John W. Linville
parent c23b7c8f71
commit b60186f824
3 changed files with 315 additions and 61 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/net/wireless/mwifiex/Kconfig
View File

@ -3,13 +3,13 @@ config MWIFIEX
depends on CFG80211
---help---
This adds support for wireless adapters based on Marvell
802.11n chipsets.
802.11n/ac chipsets.
If you choose to build it as a module, it will be called
mwifiex.
config MWIFIEX_SDIO
tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797"
tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8897"
depends on MWIFIEX && MMC
select FW_LOADER
---help---

267
drivers/net/wireless/mwifiex/sdio.c
View File

@ -84,6 +84,8 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
card->reg = data->reg;
card->max_ports = data->max_ports;
card->mp_agg_pkt_limit = data->mp_agg_pkt_limit;
card->supports_sdio_new_mode = data->supports_sdio_new_mode;
card->has_control_mask = data->has_control_mask;
}
sdio_claim_host(func);
@ -260,6 +262,8 @@ static int mwifiex_sdio_resume(struct device *dev)
#define SDIO_DEVICE_ID_MARVELL_8787 (0x9119)
/* Device ID for SD8797 */
#define SDIO_DEVICE_ID_MARVELL_8797 (0x9129)
/* Device ID for SD8897 */
#define SDIO_DEVICE_ID_MARVELL_8897 (0x912d)
/* WLAN IDs */
static const struct sdio_device_id mwifiex_ids[] = {
@ -269,6 +273,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
.driver_data = (unsigned long) &mwifiex_sdio_sd8787},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797),
.driver_data = (unsigned long) &mwifiex_sdio_sd8797},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897),
.driver_data = (unsigned long) &mwifiex_sdio_sd8897},
{},
};
@ -412,7 +418,40 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
}
/*
* This function initializes the IO ports.
* This function is used to initialize IO ports for the
* chipsets supporting SDIO new mode eg SD8897.
*/
static int mwifiex_init_sdio_new_mode(struct mwifiex_adapter *adapter)
{
u8 reg;
adapter->ioport = MEM_PORT;
/* enable sdio new mode */
if (mwifiex_read_reg(adapter, CARD_CONFIG_2_1_REG, &reg))
return -1;
if (mwifiex_write_reg(adapter, CARD_CONFIG_2_1_REG,
reg | CMD53_NEW_MODE))
return -1;
/* Configure cmd port and enable reading rx length from the register */
if (mwifiex_read_reg(adapter, CMD_CONFIG_0, &reg))
return -1;
if (mwifiex_write_reg(adapter, CMD_CONFIG_0, reg | CMD_PORT_RD_LEN_EN))
return -1;
/* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is
* completed
*/
if (mwifiex_read_reg(adapter, CMD_CONFIG_1, &reg))
return -1;
if (mwifiex_write_reg(adapter, CMD_CONFIG_1, reg | CMD_PORT_AUTO_EN))
return -1;
return 0;
}
/* This function initializes the IO ports.
*
* The following operations are performed -
* - Read the IO ports (0, 1 and 2)
@ -426,6 +465,12 @@ static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
adapter->ioport = 0;
if (card->supports_sdio_new_mode) {
if (mwifiex_init_sdio_new_mode(adapter))
return -1;
goto cont;
}
/* Read the IO port */
if (!mwifiex_read_reg(adapter, IO_PORT_0_REG, &reg))
adapter->ioport |= (reg & 0xff);
@ -441,7 +486,7 @@ static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
adapter->ioport |= ((reg & 0xff) << 16);
else
return -1;
cont:
pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport);
/* Set Host interrupt reset to read to clear */
@ -504,10 +549,16 @@ static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%08x\n", rd_bitmap);
if (!(rd_bitmap & (CTRL_PORT_MASK | reg->data_port_mask)))
return -1;
if (card->supports_sdio_new_mode) {
if (!(rd_bitmap & reg->data_port_mask))
return -1;
} else {
if (!(rd_bitmap & (CTRL_PORT_MASK | reg->data_port_mask)))
return -1;
}
if (card->mp_rd_bitmap & CTRL_PORT_MASK) {
if ((card->has_control_mask) &&
(card->mp_rd_bitmap & CTRL_PORT_MASK)) {
card->mp_rd_bitmap &= (u32) (~CTRL_PORT_MASK);
*port = CTRL_PORT;
dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%08x\n",
@ -542,24 +593,34 @@ static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u32 *port)
{
struct sdio_mmc_card *card = adapter->card;
const struct mwifiex_sdio_card_reg *reg = card->reg;
u32 wr_bitmap = card->mp_wr_bitmap;
dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%08x\n", wr_bitmap);
if (!(wr_bitmap & card->mp_data_port_mask))
if (card->supports_sdio_new_mode &&
!(wr_bitmap & reg->data_port_mask)) {
adapter->data_sent = true;
return -EBUSY;
} else if (!card->supports_sdio_new_mode &&
!(wr_bitmap & card->mp_data_port_mask)) {
return -1;
}
if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) {
card->mp_wr_bitmap &= (u32) (~(1 << card->curr_wr_port));
*port = card->curr_wr_port;
if (++card->curr_wr_port == card->mp_end_port)
card->curr_wr_port = card->reg->start_wr_port;
if (((card->supports_sdio_new_mode) &&
(++card->curr_wr_port == card->max_ports)) ||
((!card->supports_sdio_new_mode) &&
(++card->curr_wr_port == card->mp_end_port)))
card->curr_wr_port = reg->start_wr_port;
} else {
adapter->data_sent = true;
return -EBUSY;
}
if (*port == CTRL_PORT) {
if ((card->has_control_mask) && (*port == CTRL_PORT)) {
dev_err(adapter->dev,
"invalid data port=%d cur port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n",
*port, card->curr_wr_port, wr_bitmap,
@ -904,6 +965,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
if (sdio_ireg) {
/*
* DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
* For SDIO new mode CMD port interrupts
* DN_LD_CMD_PORT_HOST_INT_STATUS and/or
* UP_LD_CMD_PORT_HOST_INT_STATUS
* Clear the interrupt status register
*/
dev_dbg(adapter->dev, "int: sdio_ireg = %#x\n", sdio_ireg);
@ -1031,7 +1095,7 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
u8 *curr_ptr;
u32 rx_len = skb->len;
if (port == CTRL_PORT) {
if ((card->has_control_mask) && (port == CTRL_PORT)) {
/* Read the command Resp without aggr */
dev_dbg(adapter->dev, "info: %s: no aggregation for cmd "
"response\n", __func__);
@ -1048,7 +1112,10 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
goto rx_curr_single;
}
if (card->mp_rd_bitmap & (~((u32) CTRL_PORT_MASK))) {
if ((!card->has_control_mask && (card->mp_rd_bitmap &
card->reg->data_port_mask)) ||
(card->has_control_mask && (card->mp_rd_bitmap &
(~((u32) CTRL_PORT_MASK))))) {
/* Some more data RX pending */
dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__);
@ -1100,8 +1167,25 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
card->mpa_rx.pkt_cnt);
mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(card->mpa_rx.ports << 4)) + card->mpa_rx.start_port;
if (card->supports_sdio_new_mode) {
int i;
u32 port_count;
for (i = 0, port_count = 0; i < card->max_ports; i++)
if (card->mpa_rx.ports & BIT(i))
port_count++;
/* Reading data from "start_port + 0" to "start_port +
* port_count -1", so decrease the count by 1
*/
port_count--;
mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(port_count << 8)) + card->mpa_rx.start_port;
} else {
mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(card->mpa_rx.ports << 4)) +
card->mpa_rx.start_port;
}
if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
card->mpa_rx.buf_len, mport, 1))
@ -1200,6 +1284,8 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
u32 rx_blocks;
u16 rx_len;
unsigned long flags;
u32 bitmap;
u8 cr;
spin_lock_irqsave(&adapter->int_lock, flags);
sdio_ireg = adapter->int_status;
@ -1209,12 +1295,60 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
if (!sdio_ireg)
return ret;
/* Following interrupt is only for SDIO new mode */
if (sdio_ireg & DN_LD_CMD_PORT_HOST_INT_STATUS && adapter->cmd_sent)
adapter->cmd_sent = false;
/* Following interrupt is only for SDIO new mode */
if (sdio_ireg & UP_LD_CMD_PORT_HOST_INT_STATUS) {
u32 pkt_type;
/* read the len of control packet */
rx_len = card->mp_regs[CMD_RD_LEN_1] << 8;
rx_len |= (u16) card->mp_regs[CMD_RD_LEN_0];
rx_blocks = DIV_ROUND_UP(rx_len, MWIFIEX_SDIO_BLOCK_SIZE);
if (rx_len <= INTF_HEADER_LEN ||
(rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) >
MWIFIEX_RX_DATA_BUF_SIZE)
return -1;
rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE);
skb = dev_alloc_skb(rx_len);
if (!skb)
return -1;
skb_put(skb, rx_len);
if (mwifiex_sdio_card_to_host(adapter, &pkt_type, skb->data,
skb->len, adapter->ioport |
CMD_PORT_SLCT)) {
dev_err(adapter->dev,
"%s: failed to card_to_host", __func__);
dev_kfree_skb_any(skb);
goto term_cmd;
}
if ((pkt_type != MWIFIEX_TYPE_CMD) &&
(pkt_type != MWIFIEX_TYPE_EVENT))
dev_err(adapter->dev,
"%s:Received wrong packet on cmd port",
__func__);
mwifiex_decode_rx_packet(adapter, skb, pkt_type);
}
if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
card->mp_wr_bitmap =
((u32) card->mp_regs[reg->wr_bitmap_u]) << 8;
card->mp_wr_bitmap |=
(u32) card->mp_regs[reg->wr_bitmap_l];
dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%08x\n",
bitmap = (u32) card->mp_regs[reg->wr_bitmap_l];
bitmap |= ((u32) card->mp_regs[reg->wr_bitmap_u]) << 8;
if (card->supports_sdio_new_mode) {
bitmap |=
((u32) card->mp_regs[reg->wr_bitmap_1l]) << 16;
bitmap |=
((u32) card->mp_regs[reg->wr_bitmap_1u]) << 24;
}
card->mp_wr_bitmap = bitmap;
dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%x\n",
card->mp_wr_bitmap);
if (adapter->data_sent &&
(card->mp_wr_bitmap & card->mp_data_port_mask)) {
@ -1227,7 +1361,7 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
/* As firmware will not generate download ready interrupt if the port
updated is command port only, cmd_sent should be done for any SDIO
interrupt. */
if (adapter->cmd_sent) {
if (card->has_control_mask && adapter->cmd_sent) {
/* Check if firmware has attach buffer at command port and
update just that in wr_bit_map. */
card->mp_wr_bitmap |=
@ -1239,10 +1373,16 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
dev_dbg(adapter->dev, "info: cmd_sent=%d data_sent=%d\n",
adapter->cmd_sent, adapter->data_sent);
if (sdio_ireg & UP_LD_HOST_INT_STATUS) {
card->mp_rd_bitmap =
((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
card->mp_rd_bitmap |= (u32) card->mp_regs[reg->rd_bitmap_l];
dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%08x\n",
bitmap = (u32) card->mp_regs[reg->rd_bitmap_l];
bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
if (card->supports_sdio_new_mode) {
bitmap |=
((u32) card->mp_regs[reg->rd_bitmap_1l]) << 16;
bitmap |=
((u32) card->mp_regs[reg->rd_bitmap_1u]) << 24;
}
card->mp_rd_bitmap = bitmap;
dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%x\n",
card->mp_rd_bitmap);
while (true) {
@ -1285,37 +1425,33 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
if (mwifiex_sdio_card_to_host_mp_aggr(adapter, skb,
port)) {
u8 cr = 0;
dev_err(adapter->dev, "card_to_host_mpa failed:"
" int status=%#x\n", sdio_ireg);
if (mwifiex_read_reg(adapter,
CONFIGURATION_REG, &cr))
dev_err(adapter->dev,
"read CFG reg failed\n");
dev_dbg(adapter->dev,
"info: CFG reg val = %d\n", cr);
if (mwifiex_write_reg(adapter,
CONFIGURATION_REG,
(cr | 0x04)))
dev_err(adapter->dev,
"write CFG reg failed\n");
dev_dbg(adapter->dev, "info: write success\n");
if (mwifiex_read_reg(adapter,
CONFIGURATION_REG, &cr))
dev_err(adapter->dev,
"read CFG reg failed\n");
dev_dbg(adapter->dev,
"info: CFG reg val =%x\n", cr);
return -1;
goto term_cmd;
}
}
}
return 0;
term_cmd:
/* terminate cmd */
if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
dev_err(adapter->dev, "read CFG reg failed\n");
else
dev_dbg(adapter->dev, "info: CFG reg val = %d\n", cr);
if (mwifiex_write_reg(adapter, CONFIGURATION_REG, (cr | 0x04)))
dev_err(adapter->dev, "write CFG reg failed\n");
else
dev_dbg(adapter->dev, "info: write success\n");
if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
dev_err(adapter->dev, "read CFG reg failed\n");
else
dev_dbg(adapter->dev, "info: CFG reg val =%x\n", cr);
return -1;
}
/*
@ -1344,7 +1480,9 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
s32 f_postcopy_cur_buf = 0;
u32 mport;
if ((!card->mpa_tx.enabled) || (port == CTRL_PORT)) {
if (!card->mpa_tx.enabled ||
(card->has_control_mask && (port == CTRL_PORT)) ||
(card->supports_sdio_new_mode && (port == CMD_PORT_SLCT))) {
dev_dbg(adapter->dev, "info: %s: tx aggregation disabled\n",
__func__);
@ -1419,8 +1557,26 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
dev_dbg(adapter->dev, "data: %s: send aggr buffer: %d %d\n",
__func__,
card->mpa_tx.start_port, card->mpa_tx.ports);
mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(card->mpa_tx.ports << 4)) + card->mpa_tx.start_port;
if (card->supports_sdio_new_mode) {
u32 port_count;
int i;
for (i = 0, port_count = 0; i < card->max_ports; i++)
if (card->mpa_tx.ports & BIT(i))
port_count++;
/* Writing data from "start_port + 0" to "start_port +
* port_count -1", so decrease the count by 1
*/
port_count--;
mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(port_count << 8)) + card->mpa_tx.start_port;
} else {
mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(card->mpa_tx.ports << 4)) +
card->mpa_tx.start_port;
}
ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf,
card->mpa_tx.buf_len, mport);
@ -1493,6 +1649,9 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
pkt_len > MWIFIEX_UPLD_SIZE)
dev_err(adapter->dev, "%s: payload=%p, nb=%d\n",
__func__, payload, pkt_len);
if (card->supports_sdio_new_mode)
port = CMD_PORT_SLCT;
}
/* Transfer data to card */
@ -1748,8 +1907,11 @@ mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port)
card->mp_data_port_mask = reg->data_port_mask;
for (i = 1; i <= card->max_ports - card->mp_end_port; i++)
card->mp_data_port_mask &= ~(1 << (card->max_ports - i));
if (reg->start_wr_port) {
for (i = 1; i <= card->max_ports - card->mp_end_port; i++)
card->mp_data_port_mask &=
~(1 << (card->max_ports - i));
}
card->curr_wr_port = reg->start_wr_port;
@ -1857,3 +2019,4 @@ MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE(SD8786_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);

105
drivers/net/wireless/mwifiex/sdio.h
View File

@ -32,6 +32,7 @@
#define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin"
#define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
#define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
#define BLOCK_MODE 1
#define BYTE_MODE 0
@ -46,6 +47,23 @@
#define CTRL_PORT 0
#define CTRL_PORT_MASK 0x0001
#define CMD_PORT_UPLD_INT_MASK (0x1U<<6)
#define CMD_PORT_DNLD_INT_MASK (0x1U<<7)
#define HOST_TERM_CMD53 (0x1U << 2)
#define REG_PORT 0
#define MEM_PORT 0x10000
#define CMD_RD_LEN_0 0xB4
#define CMD_RD_LEN_1 0xB5
#define CARD_CONFIG_2_1_REG 0xCD
#define CMD53_NEW_MODE (0x1U << 0)
#define CMD_CONFIG_0 0xB8
#define CMD_PORT_RD_LEN_EN (0x1U << 2)
#define CMD_CONFIG_1 0xB9
#define CMD_PORT_AUTO_EN (0x1U << 0)
#define CMD_PORT_SLCT 0x8000
#define UP_LD_CMD_PORT_HOST_INT_STATUS (0x40U)
#define DN_LD_CMD_PORT_HOST_INT_STATUS (0x80U)
#define SDIO_MP_TX_AGGR_DEF_BUF_SIZE (8192) /* 8K */
/* Multi port RX aggregation buffer size */
@ -73,6 +91,7 @@
#define UP_LD_HOST_INT_MASK (0x1U)
/* Host Control Registers : Download host interrupt mask */
#define DN_LD_HOST_INT_MASK (0x2U)
/* Disable Host interrupt mask */
#define HOST_INT_DISABLE 0xff
@ -196,8 +215,12 @@ struct mwifiex_sdio_card_reg {
u8 max_mp_regs;
u8 rd_bitmap_l;
u8 rd_bitmap_u;
u8 rd_bitmap_1l;
u8 rd_bitmap_1u;
u8 wr_bitmap_l;
u8 wr_bitmap_u;
u8 wr_bitmap_1l;
u8 wr_bitmap_1u;
u8 rd_len_p0_l;
u8 rd_len_p0_u;
u8 card_misc_cfg_reg;
@ -211,6 +234,8 @@ struct sdio_mmc_card {
const struct mwifiex_sdio_card_reg *reg;
u8 max_ports;
u8 mp_agg_pkt_limit;
bool supports_sdio_new_mode;
bool has_control_mask;
u32 mp_rd_bitmap;
u32 mp_wr_bitmap;
@ -232,6 +257,8 @@ struct mwifiex_sdio_device {
const struct mwifiex_sdio_card_reg *reg;
u8 max_ports;
u8 mp_agg_pkt_limit;
bool supports_sdio_new_mode;
bool has_control_mask;
};
static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
@ -255,11 +282,39 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
.card_misc_cfg_reg = 0x6c,
};
static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
.start_rd_port = 0,
.start_wr_port = 0,
.base_0_reg = 0x60,
.base_1_reg = 0x61,
.poll_reg = 0x50,
.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
.status_reg_0 = 0xc0,
.status_reg_1 = 0xc1,
.sdio_int_mask = 0xff,
.data_port_mask = 0xffffffff,
.max_mp_regs = 184,
.rd_bitmap_l = 0x04,
.rd_bitmap_u = 0x05,
.rd_bitmap_1l = 0x06,
.rd_bitmap_1u = 0x07,
.wr_bitmap_l = 0x08,
.wr_bitmap_u = 0x09,
.wr_bitmap_1l = 0x0a,
.wr_bitmap_1u = 0x0b,
.rd_len_p0_l = 0x0c,
.rd_len_p0_u = 0x0d,
.card_misc_cfg_reg = 0xcc,
};
static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
.firmware = SD8786_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd87xx,
.max_ports = 16,
.mp_agg_pkt_limit = 8,
.supports_sdio_new_mode = false,
.has_control_mask = true,
};
static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
@ -267,6 +322,8 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
.reg = &mwifiex_reg_sd87xx,
.max_ports = 16,
.mp_agg_pkt_limit = 8,
.supports_sdio_new_mode = false,
.has_control_mask = true,
};
static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
@ -274,6 +331,17 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
.reg = &mwifiex_reg_sd87xx,
.max_ports = 16,
.mp_agg_pkt_limit = 8,
.supports_sdio_new_mode = false,
.has_control_mask = true,
};
static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
.firmware = SD8897_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd8897,
.max_ports = 32,
.mp_agg_pkt_limit = 16,
.supports_sdio_new_mode = true,
.has_control_mask = false,
};
/*
@ -302,13 +370,23 @@ mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card)
u8 tmp;
if (card->curr_rd_port < card->mpa_rx.start_port) {
tmp = card->mp_agg_pkt_limit;
if (card->supports_sdio_new_mode)
tmp = card->mp_end_port >> 1;
else
tmp = card->mp_agg_pkt_limit;
if (((card->max_ports - card->mpa_rx.start_port) +
card->curr_rd_port) >= tmp)
return true;
}
if (!card->supports_sdio_new_mode)
return false;
if ((card->curr_rd_port - card->mpa_rx.start_port) >=
(card->mp_end_port >> 1))
return true;
return false;
}
@ -318,13 +396,23 @@ mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card)
u16 tmp;
if (card->curr_wr_port < card->mpa_tx.start_port) {
tmp = card->mp_agg_pkt_limit;
if (card->supports_sdio_new_mode)
tmp = card->mp_end_port >> 1;
else
tmp = card->mp_agg_pkt_limit;
if (((card->max_ports - card->mpa_tx.start_port) +
card->curr_wr_port) >= tmp)
return true;
}
if (!card->supports_sdio_new_mode)
return false;
if ((card->curr_wr_port - card->mpa_tx.start_port) >=
(card->mp_end_port >> 1))
return true;
return false;
}
@ -337,11 +425,14 @@ static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card,
if (!card->mpa_rx.pkt_cnt)
card->mpa_rx.start_port = port;
if (card->mpa_rx.start_port <= port)
card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt);
else
card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1);
if (card->supports_sdio_new_mode) {
card->mpa_rx.ports |= (1 << port);
} else {
if (card->mpa_rx.start_port <= port)
card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt);
else
card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1);
}
card->mpa_rx.skb_arr[card->mpa_rx.pkt_cnt] = skb;
card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = skb->len;
card->mpa_rx.pkt_cnt++;